Computer Support Forum

STOP 0x0000001E while using Chrome

Question: STOP 0x0000001E while using Chrome

Computer recently had W7 64-bit installed and has been working fine for over a week.

That was until this morning. I received STOP 0x0000001E while using Chrome and now the computer is in a startup BSOD loop. When the computer is loading startup programs when booting outside of safe mode the whole process seems inordinately sluggish then after about roughly a minute a BSOD will occur. However the system runs fine in safe mode as I am currently using it to post this request.

I have attached the dump files gathered using Seven Diagnostic Tools. Any help you guys can give me with regards to this would be greatly appreciated!

Relevance 100%
Preferred Solution: STOP 0x0000001E while using Chrome

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: STOP 0x0000001E while using Chrome

Welcome

Why are you using the Enterprise version of Windows 7?

Code:
STOP 0x0000001E: KMODE_EXCEPTION_NOT_HANDLED
Usual causes: Device driver, hardware, System service, compatibility,
Remote control programs, memory, BIOS
BugCheck 1E, {ffffffffc0000005, fffff80002a7a7ef, 0, 7efa0000}
Probably caused by : ntkrnlmp.exe ( nt!RtlImageNtHeaderEx+3f )
Suggestions:
Uninstall AVG, it causes BSoDs. Use free MSE (at least to test). Make a full scan once installed and updatedAVG | Download tools and utilities
Microsoft Security Essentials - Free Antivirus for Windows

Run the System File Checker that scans the the integrity of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:SFC /SCANNOW Command - System File Checker
Run Disk Check on your hard disk for file system errors and bad sectors on it:Disk Check
Remove any 3rd party remote control programs during troubleshooting
Code:
Driver c:\windows\system32\drivers\atikmpag.sys (8.14.1.6264, 351.50 KB (359,936 bytes), 7/3/2012 10:10 PM)
Update your graphic card drivers to their latest:Download and install Driver Sweeper:
→ |MG| Driver Fusion (Driver Sweeper) 1.2.0 Download
Download the auto-detect tool for AMD.
→ AMD Driver Autodetect
Boot into Safe Mode from Advanced Boot Options:
→ Advanced Boot Options
Type in Driver Fusion in Search
Remove all drivers
Boot normally now, and install the latest drivers from the
auto-detect program you downloaded.

Let us know the results and further blue screens if any

3 more replies
Relevance 59.04%
Question: STOP: 0x0000001E

I installed a webcam back in May and it worked fine until now, everytime i try to use my webcam now it goes to the blue screen, with the first line saying STOP: 0x000000E1 (0xC000005, 0xFC2F30C3, 0x00000000, 0x0459C0F4) and the second line says KMODE_EXCEPTION_NOT_HANDLED and thats it. I have a windows 2000 5.00.2195 Service Pack 4 and the cam im using is Elitech PC-319-SL
 

Answer:STOP: 0x0000001E

16 more replies
Relevance 59.04%
Question: STOP: 0x0000001E

I have a STOP: 0x0000001E erro in Windows 2000 I cannot resolve.

I have upgraded 98 to 2000 SP4 without problems, everything was fine. I booted p, reinstalled office 2000 due to office start messages and then rebooted. In now get the following:

STOP: 0x0000001E (0xC0000005,0xED3D2458,0x00000000,0x00000028)
KMODE_EXCEPTION_NOT_HANDLED

I have NO message indicating where the error is occuring.
I have 1.5 GB free disc space.
I can boot into safe mode, but I have no idea what to check after that. Video adapter looks fine (was fine before office 2000).
I have run a Repair without success.

I am desparate for advice.

Many thanks
Trev.
 

Answer:STOP: 0x0000001E

http://aumha.org/win5/kbestop.php
 

1 more replies
Relevance 58.22%

I have been getting the BSOD very frequently. Recently reinstalled windows and updated all drivers, but still getting BSOD. Usually happens while surfing the internet with Chrome or Firefox. I've uploaded the .dmp files. Any information would be appreciated.

Answer:BSOD Surfing with Chrome 0x0000001E

Welcome to SevenForums.

Norton tends to cause BSOD-s. I would recommend uninstalling it with the Norton Removal Tool and replace with Microsoft Security Essentials To Test. You may install it back if it wasn't the cause of your BSOD-s.Norton Removal Tool
Make scans with the following:

-Kaspersky TDSSKillerAnti-rootkit utility TDSSKiller
-ESET online scannerFree Online Virus Scanner | ESET
Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-Microsoft Security Essentials - Free Antivirus for WindowsMalwarebytes : Malwarebytes Anti-Malware removes malware including viruses, spyware, worms and trojans, plus it protects your computerGood and Free system security combination.
How to Scan Your Computer With Multiple Antivirus Programs - How-To Geek




   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Perform a System File Check:Click on the start
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker
Disk Check on your hard drive for file system errors and bad sectors on it:Disk Check
Reduce items at start-up. Nothing except anti-virus is required plus improves the time for logging in windows.Star... Read more

1 more replies
Relevance 58.22%

I hope someone can help, im really stuck with this problem.

The full error is - stop: 0x0000001E (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000)

To add to the crash, my pc them does not restart. Sometime i have to leave it for an hour or overnight before it will boot. All i hear is the fan's but there's nothing on to screen.

When the Pc does boot ok (it of course goes through all the checks you get after a crash) it can be anything from 1minute to 2 hours and it will crash again. This makes it difficult to actually work on it.

I'll do my best to upload a dump file as soon as i can (typing from a laptop right now).

So far i have tried the following (with various help by searching on google).

Reinstalling windows.

Returned my mobo, cpu and Ram to the shop (was bought as a bundle), all tested fine.

Assuming it could only be my graphics card, i have bought a new one. I also bought a new PSU.

Answer:BSOD - stop: 0x0000001E

  
Quote: Originally Posted by rosshan


I hope someone can help, im really stuck with this problem.

The full error is - stop: 0x0000001E (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000)

To add to the crash, my pc them does not restart. Sometime i have to leave it for an hour or overnight before it will boot. All i hear is the fan's but there's nothing on to screen.

When the Pc does boot ok (it of course goes through all the checks you get after a crash) it can be anything from 1minute to 2 hours and it will crash again. This makes it difficult to actually work on it.

I'll do my best to upload a dump file as soon as i can (typing from a laptop right now).

So far i have tried the following (with various help by searching on google).

Reinstalling windows.

Returned my mobo, cpu and Ram to the shop (was bought as a bundle), all tested fine.

Assuming it could only be my graphics card, i have bought a new one. I also bought a new PSU.




To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.

To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Unde... Read more

2 more replies
Relevance 58.22%

Got 2 BSOD today with one being stop 0x0000001e and the other IRQL LESS OR EQUAL... not sure why all gpu and cpu ocs are off and are on default and my system is less than a year old with all good quality parts.
Thanks

Answer:BSOD stop 0x0000001e

Looking at your dump files I see numerous errors, however there is a particular function that has caught my eye.


Code:
BugCheck 1000007E, {ffffffffc0000005, fffff80003506622, fffff880033e06d8, fffff880033dff30}

Probably caused by : ntkrnlmp.exe ( nt!KxWaitForLockOwnerShip+12 )
This function, because it's undocumented there isn't too much about it.
I will take an educated guess and say it looks like a thread is trying to take ownership of a mutex object but is having to wait for some reason.

We can see an access violation which means the CPU has tried to access memory that is simply not available, whether it's due to a null pointer or the address trying to access has already been freed.


Code:
4: kd> ln fffff80003506622
(fffff800`03506610) nt!KxWaitForLockOwnerShip+0x12 | (fffff800`03506660) nt!KxWaitForLockChainValid
There's the access violation that occurred at nt!KxWaitForLockOwnerShip


Code:
4: kd> u nt!KxWaitForLockOwnerShip+12
nt!KxWaitForLockOwnerShip+0x12:
fffff800`03506622 48890a mov qword ptr [rdx],rcx
fffff800`03506625 33db xor ebx,ebx
fffff800`03506627 660f1f0400 nop word ptr [rax+rax]
fffff800`0350662c ffc3 inc ebx
fffff800`0350662e 851d946d2000 test dword ptr [nt!HvlLongSpinCountMask (fffff800`0370d3c8)],ebx
fffff800`03506634 0f847fb3faff je nt! ?? ::FNODOBFM::`string'+0x5da0 (fffff800`034b19b9)
fffff800`0350663a f390 pause
fffff800`0350663c 488b4f08 ... Read more

9 more replies
Relevance 58.22%

Hello,

I am really stressed about my BSOD problem w/ my Windows 2000 Professional 2Pk operating system. My computer will not startup properly then goes to blue screen w/ the message...

STOP: 0X0000001E (0xc0000005, 0XEB9E09FA, 0x00000000, 0x00000118) KMODE_EXCEPTION_NOT_HANDLED
Address EB9E909FA base at EB9E0000,
Date stamp 46eac08d-ohctusb.sys

Beginning dump of physical memory
Dumping physical memory to disk: (then it counts down to 100 and reboots starting the above process all over again).

I've been looking for help online and speaking to people but everyone is down on me for still using Windows 2000 Professional. Am willing to upgrade to XP if I can figure out the current problem.

So far I have: purchased Registry Fix, tried using the ERD, Recovery Console, and clean nstallation. Nothing works but the good news is that it does work in SAFE MODE and all of my files are there.

PLEASE help. I'm not sure what to do next.

Best,

Isabel
 

Answer:STOP: 0X0000001E Problem!

16 more replies
Relevance 58.22%

This is the fourth time in two weeks that my system has thrown this error up, I am more than happy to provide any details needed, blue screen viewer shows that it is caused by tcpip.sys.
 
I am not sure what details to send so you guys can check it out but any help you can give would be very much appreciated.
 
All the best.

Answer:BSOD - STOP 0x0000001E please help!

Hi
 
Please follow the below steps.
 
Upload the actual crash dump files.
 
You will find the crash dump files inside C:\Windows\Minidump folder. To copy the dumps, disable "User Account Control" first. Otherwise you may receive a permission error. After disabling UAC, copy and zip most recent three or more dumps to a single file. Either attach the zip with next reply using "More reply options --> Attach files" or use a free file hosting site. 
 
For example -> http://www.mediafire.com/
 
Publish a snapshot of your system using Speccy.
 
"Speccy" is a free tool which can list the hardware specs, temperature status, installed Windows updates, HDD SMART info etc of your system. Please read the below tutorial to know how to use "Speccy" to collect system info.
 
http://www.bleepingcomputer.com/forums/t/323892/publish-a-snapshot-using-speccy/
 
Don't paste the output displayed by "Speccy" here. Instead paste the web link it displays.
 
Minitoolbox log.
 
"Minitoolbox" can list all the installed programs as well as event log errors in your system. Download "Minitoolbox" from the below link.
 
http://www.bleepingcomputer.com/download/minitoolbox/
 
 Run the tool and only select the following tick boxes.
 
 
List last 10 Event viewer errors
List installed program
List users, partition and memory size
List Minidumps
 
Now click "Go" and post the output displayed in next reply.

7 more replies
Relevance 58.22%

Hey I keep getting the "STOP Error 0x0000001E" screen, it does a dump and then restarts as normal. It seems more likely to come up when I am watching videos or playing a game. Any help would be greatly appreciated.
Thanks

Answer:STOP Error 0x0000001E

Welcome to SF.

The .nfo file uploaded is corrupt.

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.

Please upload your msinfo32.txt file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Export -> Save as msinfo32.txt and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .txt file, click send to compressed (zipped) folder -> Upload the .zip file here.

9 more replies
Relevance 58.22%

Good Morning!

Having some trouble with a laptop given to me by a friend. Attached are the documents requested by the pinned thread.

The system is a Dell Inspiron N7110.
Also attached is a system configuration from the manufacturer. Not sure if that helps at all.
Currently, my troubleshooting options have been as such: Attempted start-up repair. Start-up repair did not resolve the issue. Did a full hardware diagnostics check. All components are good with minor battery issues due to normal aging and wear. After booting to safe-mode, Installed Malwarebytes. Blue-screen upon end of installation. Rebooted, and uninstalled/reinstalled malwarebytes. Unable to fully scan system without a blue-screen.

Any recommendations?

If you have any assistance to offer, I would appreciate it. Unfortunately, I don't have much to give in return at the moment other than kind words. :/

Answer:BSOD - STOP: 0x0000001E & more

The latest .dmp files don't provide any conclusive evidence as to the crash.

Please do the following:

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
Driver Verifier - Enable and Disable

Driver Verifier will cause your computer to run very sluggishly - this is normal. What it is trying to do is force your system to BSOD and isolate the offending driver/s. When it does, reboot, disable driver verifier, reboot as normal and upload the new dmp file/s here.

I recommend creating a system restore point before turning on driver verifier:
System Restore Point - Create

If your system fails to boot to desktop once driver verifier is enabled, turn it off by booting into Safe Mode:
Safe Mode

3 more replies
Relevance 58.22%

Getting this BSOD error while doing pretty much anything.

Attached is the required information/files.

Specifications
- x64 (64 bit)(Ultimate)- Windows 7 is the original OS
- Full retail copy
- hardware ranging from about 3/4 years to a few days
- OS installed a few days ago
- Radeon 4850 HD
- Ripjaw 8GB DDR3 1600 MHz Dual Channel
- AMD Athlon II x4 2.9 GHz

Answer:BSOD - STOP 0x0000001e (While Doing Anything it Seems)

Perfmon reports that drivers for your coprocessor haven't been installed. Please visit the PC Manufacturer's website and download and install the chipset drivers for your system ( http://www.nvidia.com/object/nforce-...56-driver.html ). Then run another perfmon /report to ensure that the update has succeeded.

You only have 55 updates after SP1, most systems have 70 or more. Please visit Windows Update and get all available updates (language packs aren't necessary).






Quote:
AMD OverDrive (AODDriver2.sys) is either a stand-alone application, or a component of the AMD VISION Engine Control Center.
Please uninstall the AMD OverDrive program as it can cause BSOD's on your system.
If it's the stand-alone app, uninstall it via Control Panel...Programs...Uninstall a program
If it's in the AMD VISION Engine Control Center, you can uninstall it using the AMD uninstall tool (or uninstall the entire AMD VISION Engine Control Center application through Control Panel


If overclocking, please stop. Remove the overclock and return the system to stock/standard values while we're troubleshooting. Once the system is stable again, feel free to resume the overclocking.

Western Digital software dates from 2008, please uninstall it.
Your nVidia Ethernet Networking Driver dates from 2008 also. You can download the latest chipset drivers (which include the ethernet driver) from here: NVIDIA DRIVERS 15.56 WHQL

BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [... Read more

3 more replies
Relevance 58.22%

System is approx five months old Windows 7 64 bit home premium came preinstalled. Please advise if any additional info is needed.
System specs include all devices at time of bsod. I have disconnected the usb drives that were attached

Answer:BSOD STOP: 0x0000001e

Software Concerns:Security Software: ??? I see Sophos installed, but I do not see it running. Is it running, or is it even actually installed?

Make sure to install security software. I recommend either of these:Microsoft Security Essentials - Free Antivirus for Windows coupled with Malwarebytes. Do not start the free trial of Malwarebytes. Just use the standalone version, update it, and scan your computer once a week with Malwarebytes and with Microsoft Security Essentials.

Good and Free system security combination.

After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.

Analysis:Crashes point to your wireless network adapter. Yours appears to be a USB device with Atheros drivers (you may have a different manufacturer). I would advice replacing the USB wireless network adapter with a Windows 7 compatible PCI wireless adapter. If you cannot replace the USB device with a PCI device, at least get a USB device that is Windows 7 compatible; yours is from 2008 and is pre-Windows 7.

Keep in mind that if you do stay with USB wireless network adapters instead of PCI, they are inherrently unstable. USB ports do not supply adequate power for those devices to work reliably. You are much better off with a PCI device if you can find one that meets your needs and fits your system's hardware configuration.

2 more replies
Relevance 58.22%

Need help on this BSOD that keep coming up. I have re-installed windows multiple times and still get the BSOD.

Here is a picture of the BSOD:
Attached are the dump files. Any feedback would really be appreciated.

Thank you.

*Sorry for the picture being sideways, If you click the link it shows it in the proper orientation

Answer:Need Help on a BSOD STOP: 0x0000001E

Hi,
There is a lot of info missing from your dump files.
Here are the instructions for posting:

http://www.sevenforums.com/crashes-d...tructions.html



   Tip
Ensure you click the "GRAB ALL" button and then wait for each window to appear in turn and then click OK

Cheers

Dave

1 more replies
Relevance 58.22%

Hello,

I am really stressed about my BSOD problem w/ my Windows 2000 Professional 2Pac operating system. My computer will not startup properly then goes to blue screen w/ the message...

STOP: 0X0000001E (0xc0000005, 0XEB9E09FA, 0x00000000, 0x00000118) KMODE_EXCEPTION_NOT_HANDLED
Address EB9E909FA base at EB9E0000,
Date stamp 46eac08d-ohctusb.sys

Beginning dump of physical memory
Dumping physical memory to disk: (then it counts down to 100 and reboots starting the above process all over again).

I've been looking for help online and speaking to people but everyone is down on me for still using Windows 2000 Professional. Am willing to upgrade to XP if I can figure out the current problem.

So far I have: purchased Registry Fix, tried using the ERD, Recovery Console, and clean nstallation. Nothing works but the good news is that it does work in SAFE MODE and all of my files are there.

PLEASE help. I'm not sure what to do next.

Best,

Isabel
 

Answer:Help w/ Stop: 0x0000001E Problem

16 more replies
Relevance 58.22%

Hi all,

Hope someone can help - I've had two BSOD happen while doing nothing particularly demanding on the operating system. See below for information from Windows on the error:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF8800C532CB0
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

I guess you are able to see what my set up is from my profile, but if useful:

Windows Version: Microsoft Windows 7 Home Premium
System Name: HP Pavilion g6 Notebook PC
Processor Name: AMD A6-3420M APU with Radeon(tm) HD Graphics
BIOS Name: InsydeH2O Version CCB.03.61.31F.52
Video card Name: AMD Radeon(TM) HD 6520G
Installed Memory: 6.00 GB

Many thanks in advance for any help with this issue.

Regards,
Ben

Answer:Bsod stop: 0x0000001e

Please follow Blue Screen of Death (BSOD) Posting Instructions to grab all and upload a report here.

7 more replies
Relevance 57.81%

I've been working on this one all day, as it only just started occuring, but it is to the point that it is random. Sometimes the website will open, and sometimes it will flash to the blue screen and restart. It was doing this every time I tried to shutdown, but a rollback of the display drivers out of the BETA version fixed that.

It seems to be most occuring when I multitask but the memory scanner came up with nothing, any help would be most wonderful, as I need this computer and its files for college, and reinstalling Windows 7 is a deadly option due to the lack of install disk that came with the computer.

(The occurrence detailed in the minidump was from me clicking on a link from a Skype window, and the computer crashing as Chrome attempted to load the page.)

EDIT: Ran CCleaner, didn't help.

Answer:BSOD Using Google Chrome, error 0x0000001E

Welcome


Code:
Start Menu\Programs\Alcohol 120% Public:Start Menu\Programs\Alcohol 120% Public
Please uninstall Alchohol %. It uses a driver called sptd.sys which is known to cause BSODs in Windows 7. Uninstall the software using Add/Remove Programs. Reboot the system. Once the program is uninstalled, run sptd.sys uninstaller to remove the driver from your system.

As an alternative, many people recommend the use of Total Mounter or Magic ISO

Perform a clean boot:Troubleshoot Application Conflicts by Performing a Clean Startup

Your crash dump does not give a probable cause. So we'll enable Driver verifier.

Driver Verifier

Use verifier for 36 hours. Then send us the BSOD reports

Driver Verifier
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select indivi... Read more

9 more replies
Relevance 57.81%

help please , im geting a lot of bsod every time i use chrome with addons(dont know exactly wich one) and when trying to install win7codec or some games
before the bsod screen appear i get some glitches on screen , here is a pic of errors i got so far :



and the minidumps :

http://dl.dropbox.com/u/15592145/Minidump.zip



i did a memory test using memtest86-4.0a didnt get any errors

i have a felling that the problem is in the gpu ( because of the glitches)

i did a gpu stress test using FurMark didnt get any error

my temps are good between 40 and 60 for all components

thanks every one
sorry for bad english

Answer:BSOD when using chrome or installing software , 0x0000001e

i updated all my drivers to the latest version

3 more replies
Relevance 57.4%

Recently out of no where I've started seeing BSODs, reading the Blue screen and searching for the error hasn't returned any useful results.

The search results ask me to update my bios, check for free disk space or any driver corruption. I'm refraining from updating my bios as I don't believe it's needed and there is plenty of free disk space. I imagine a driver is causing this but I'm unsure of which one as the BSOD isn't very clear.

Currently I am running Windows 7 64 bit and specs are as follows.

CPU: 2600K
Video Card: ATI 7970
MotherBoard: Sabertooth P67
Power Supply: Corsair 850

Answer:[SOLVED] BSOD: STOP 0X0000001E

Hi,

Both of the attached DMP files are of the KMODE_EXCEPTION_NOT_HANDLED (1e) bug check.

This indicates that a kernel-mode program generated an exception which the error handler did not catch.

If we take a look at the call stack:


Code:

STACK_TEXT:
fffff800`00b9bab8 fffff800`02e815be : 00000000`00000017 00000000`00000001 fffff800`00b9c2c0 fffff800`02eb4a90 : nt!KeBugCheck
fffff800`00b9bac0 fffff800`02eb475d : fffff800`03098380 fffff800`02fd5260 fffff800`02e14000 fffff800`00b9c220 : nt!KiKernelCalloutExceptionHandler+0xe
fffff800`00b9baf0 fffff800`02eb3535 : fffff800`02fd9038 fffff800`00b9bb68 fffff800`00b9c220 fffff800`02e14000 : nt!RtlpExecuteHandlerForException+0xd
fffff800`00b9bb20 fffff800`02eb6832 : fffff800`00b9c220 fffff800`00b9c2c0 fffffa80`00000001 00000000`00000000 : nt!RtlDispatchException+0x415
fffff800`00b9c200 fffff800`02e3f98a : 00000000`00000000 00000000`00000000 00000000`00000000 fffffa80`09052d00 : nt!RtlRaiseStatus+0x4e
fffff800`00b9c7a0 fffff880`0236a081 : fffff880`0236d670 00000000`00000000 00000000`00000001 fffff800`02ec7000 : nt! ?? ::FNODOBFM::`string'+0xf429
fffff800`00b9c820 fffff880`0236d670 : 00000000`00000000 00000000`00000001 fffff800`02ec7000 fffffa80`00000000 : Lachesis+0x1081
fffff800`00b9c828 00000000`00000000 : 00000000`00000001 fffff800`02ec7000 fffffa80`00000000 fffff880`00000000 : Lachesis+0x4670
FAILURE_BUCKET_ID: X64_0x1E_0_Lachesis+1081

^^ Two Lachesis.sys calls, and also involved in the failure bucket ID with a call sta... Read more

5 more replies
Relevance 57.4%

I have been experiencing this BSOD on a regular basis since 7/25/2013. I tried an older restore point, I ran DriverHub and update all drivers and my Windows Update are all current. Can not solve. Under the BSOD Stop error technical information it references a qwdf64.sys address FFFFF88002D8A69A base at FFFFF88002D87000, FFDB21. I have attached my "grab all" files folder from my SF Diagnostic Tool. Any help to fix this is greatly appreciated.

Answer:BSOD Random 0x0000001E Stop

Hello tech514. What you have described is true ... the BSOD is caused by Qustodio PassThrough Filter Driver.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000005, fffff88003d7269a, 0, 7abba90}

*** WARNING: Unable to verify timestamp for qwdf64.sys
*** ERROR: Module load completed but symbols could not be loaded for qwdf64.sys
Probably caused by : qwdf64.sys ( qwdf64+369a )

Followup: MachineOwner
---------
And the driver is somehow old.

Code:
fffff880`03d6f000 fffff880`03d7b000 qwdf64 T (no symbols)
Loaded symbol image file: qwdf64.sys
Image path: \??\C:\Windows\system32\Drivers\qwdf64.sys
Image name: qwdf64.sys
Timestamp: Fri Jul 13 13:54:01 2012 (4FFFDB21)
CheckSum: 00010A7C
ImageSize: 0000C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Qustodio Download

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Clic... Read more

1 more replies
Relevance 57.4%

The saga of driver fails continues from this thread on evga. 650 Ti 1GB vanilla version display kernel crashes. I have a 600W OCZ.

I've now removed the 650 Ti 1GB card from the system and am running in safe mode off of the A10-6800k, and enabled every single driver on startup, except for a few. I'm also getting a file missing for AMD AVT kdbsync.exe, and I can't get Windows to install the CCC software because it fails every time. There are a ton of old services and programs I can't seem to remove, like a Creative mouse I had installed for about a week several years ago, and the Asus utilities from a dead video card. I actually used CCleaner on the registry to try to remove some of the accumulated gunk, but I'm wondering if it made it now BSOD in Windows more than it did before. I had the system stable prior to the nVidia card install, and now I can't even boot to desktop. It loads to desktop, but then BSODs as soon as it hits a specific service. I'm wondering if it's not the PSU that is behind this, but it seems easy...too easy.

Unlike most posters, I plan to do a follow-up if the situation is resolve or not resolved.

Answer:STOP: 0x0000001E during boot; following GPU driver changes

You have done a lot to troubleshoot your issue.

Do one more thing. Remove the Creative Audigy Audio Processor and see how it goes.

Dont attach the GPU back befor our current test is over, as the GPU driver lately installed is a BETA, it may fail at its own virtue. Just Remove the Creative Audigy, and disable all the startup items other than MSC.

Then restart the computer a couple of times. Does it BSOD? Let us know.

If yes, post it following the Blue Screen of Death (BSOD) Posting Instructions.

4 more replies
Relevance 57.4%

Same prob as previous post now expired
I am having the same message and issue as another person who posted here, but the answer has expired.
He stated

A problem has been detected and windows has been shut down to prevent damage to you computer.
If this it the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advance Startup Options, and then select safe mode. I did this, it did nothing. If I select safe mode, it seems to print a bunch of code on the screen and lockup.

Technical Information:
***STOP: 0x0000001E (0xc0000005, 0xBF938000, 0x00000000, 0x009E20F8)
*** win32k.sys- Adress BF938000 base at BF800000, DateStamp 3b7de698

I would also like to mention that I'm unable to enter safe mode, for it crashes everytime I attemp this.

Make: hp
Running on a xp media center edittion 2005
Processor: Athlon 64 X2 4000+ 2.18 GHz
Memory: 2 Ram
Hard drive: 500 GB SATA 7200 rpm
This is the only information I have.
I do hope anyone will be able to assist in some way O_O;
 

Answer:Cannot start Windows XP stop 0x0000001E

What is the Model number of the Pc - there may be an inbuilt diagnostics tool?
Do you have the install Cd?

How Do I Find My Model Number or Product Number? | HP® Support
http://h10025.www1.hp.com/ewfrf/wc/...findModel&cc=us&dlc=en&docname=bph07555&lc=en
 

1 more replies
Relevance 57.4%

Hello everyone, since December, I have had BSOD, they have not all been the same though.. I fixed the problems for the first few BSOD I was getting, and everything was fine up until last week.. I have started getting them again.. Here is a Picture of the two BSOD.

BSOD STOP: 0x00000101: http://i.imgur.com/rjmug0w.jpg
BSOD STOP: 0x0000001E: http://i.imgur.com/IZh5AMQ.jpg

I have tried everything I can think of.. I have fully uninstalled all my Nvidia drivers, and removed the files left over manually, I have cleaned by computer case, checked the fans, put new heat gel on my CPU, tried back dated graphics cards drivers and even beta drivers, reinstalling windows, Memtest, Furmark, CPU stress test.

My CPU's average temperature is around 45C. I have reinstalled all the software for all my USB devices, searched for updates for windows, rest my BIOS to default.. I have even read through posts of this site for this kinda BSOD, and nothing has helped me.. Im pulling my hair out here, I need my PC for work, and I really need help.

If you guys need the notepad file from the blue screens, I'm not sure where to find them on my PC, so if you guys could let me know, ill post it on here! Also my Computer Specs.

Windows 7 Ultimate SP1 64-bit
ASUS Nvidia GeForce 560 GTX
AMD Phenom II x4 955 Processor
8GB RAM
ASUS motherboard m4n68t-m

Thank you!

Answer:BSOD STOP: 0x00000101 & 0x0000001E

We really need the full reports. Please upload them and we will provide our analysis and troubleshooting steps.http://www.techsupportforum.com/foru...ta-452654.html

-----

1 more replies
Relevance 57.4%

Hello everyone, Im hoping someone can help!

My laptop has been crashing and going to BSOD roughly every 2 days. Yesterday however some of my keyboard keys stopped working and now every time I try and boot the laptop I get the BSOD. Ive tried booting in safe mode etc etc and it still goes to BSOD, Ive tried system repair and again just BSOD I even changed the hard drive and tried to reinstall windows but it just kept BSODing. I cant post any information about the laptop as I cant get on to do any of this! All I know is the latest error is this:

*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff8000c0e0565, 0x00000000000000000, 0xffffffffffffffff)

Sorry its not much to go by but thanks for reading!

Answer:Constant BSOD STOP: 0X0000001E

Just managed to get in for a brief moment and it says it needed to check the disk for errors but couldnt do it as the disk was been used so it scheduked it fir next boot, rebooted it went on the the chkdisk page and instantly said it had been cancelled so cant even check the disk. Ive also noticed that each blue screen is a different error number and name but it doesnt last long enough for me to take not of them. Also my clock and date is saying its the year 2909!!

9 more replies
Relevance 57.4%

Working on a Friends Computer who have been getting this error message with every boot into the OS, (although it boots into the Desktop, Win 7 Home, then BSOD)

Safe Mode works Fine, there seems to be no spyware/virus issues, and hardware checks outs

System is a DELL Inspiron 620s

Attached is the Dump file

Thanks in Advance for the Assist

Jose Torres

Answer:BSOD Stop: 0x0000001E on ntoskrnl.exe

Hi,


Code:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffffa80084e1610, 0, 7fffffa8000}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4987d )
Followup: MachineOwner
STOP 0x0000001E: KMODE_EXCEPTION_NOT_HANDLED
Usual causes: Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS

I would suggest removing Mcafee as it may be causing issues:
How to uninstall or reinstall supported McAfee products using the Consumer Products Removal tool (MCPR)

As an alternative, please download and install:

Microsoft Security Essentials.
Recommended from a strict BSOD perspective, compatibility & stability
compared to other antiviruses/internet security software.



   Note
Once downloaded, update and run a full system scan


Then check to see if your issue still exists?

What hardware have you tested?

cheers

Dave

1 more replies
Relevance 57.4%

Hi,

Getting this BSOD Stop error Stop: 0x0000001E

No mdp file is generated. Cannot seem to find anything noteworthy in Event Viewer either.

Anyone got any ideas? Generating the mdp file would help

The behaviour right before the error does not seem to be consistent either, sometimes im surfing the web. Othertimes there is virtually only 1 or 2 programs running.

Thanks

Answer:BSOD Error Stop: 0x0000001E

  
Quote: Originally Posted by ANFIELD29



No mdp file is generated. Cannot seem to find anything noteworthy in Event Viewer either.


Whatever, post it following the Blue Screen of Death (BSOD) Posting Instructions. A 0x1E BSOD may be caused by a wide range of reasons, from a device driver to the BIOS. Without seeing the files, nobody can get any idea.

5 more replies
Relevance 57.4%

Hello, I have been having a bsod every few days and its been really frustrating. i was hoping to get some help. dmp files are attached. this computer was running fine for the several months since i put it together and suddenly this starts happening. Im running windows 7 home premium.

Answer:BSOD STOP Error 0x0000001E

please help

9 more replies
Relevance 57.4%

My computer overall has been so weird lately

1. It started to reset instead of shutting off for a while.
2. Then it did not wanna turn back on after it went to hibernate, it turned on and it turned off right away, it restarted till i held down the power button. I disabled hibernate
3. At one point the folders took a while to load, and when they did it would only show the thumbnail for a bit o sometimes no thumbnail it was weird.
4. Now finally i got a BSOD, I'm in safemode right now.

What could be the problem? i am completely lost here. I'm about to do a clean install of windows 7 but i have so much stuff i do not really wanna lose.

also all this has been happening in the course of around a month.

Answer:BSOD a little bit after start up. STOP: 0X0000001E

Daemon Tools/Alcohol %

dtsoftbus01.sys Fri Jan 13 19:45:46 2012 (4F10358A)
Daemon Tools driver [br] Possible BSOD issues in Win7
http://www.carrona.org/drivers/driver.php?id=dtsoftbus01.sys

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Win7 systems (mostly due to the sptd.sys driver, although we have seen dtsoftbus01.sys blamed on several occasions). Please uninstall the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): DuplexSecure - FAQ

As an alternative, many people recommend the use of Total Mounter or Magic ISO

AppleCharger.sys is a known cause of blue screens. Recommend to uninstall completely with Revo Uninstaller.

AppleCharger.sys Wed Nov 2 08:46:00 2011 (4EB0AEE8)
GIGABYTE On/Off Charge driver. See here for details - GIGABYTE ON/OFF Charge [br] May cause BSOD on Win7/8 systems - uninstall to test (haven't seen recently (15Jan2013))
http://www.carrona.org/drivers/driver.php?id=AppleCharger.sys



   Tip
Revo Uninstaller

Download and install Revo Uninstaller free from here: Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Opt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).

Memtest86+

Run Memtest86... Read more

9 more replies
Relevance 57.4%

Last night I attempted to install Windows 2000 Professional (using the upgrade option) from WindowsME upgrade (got tired of the constant errors & crashes). Now, when I attempt to start up the computer I get the following blue screen of death+error:

***Stop: 0x0000001E (0xC0000005), 0x805667B8, 0x00000000, 0x0000000C) KMODE_EXCEPTION_NOT_HANDLED

***Address 805667B8 base at 8040000, DateStamp 384d9b17_ntoskrnl.exe

I tried to do the troubleshooting procedures suggested in the installation manual, but am unsure of the bios part. I should also point out that I attempted to boot up in safe mode with no success...just got the same error.

Is there anything I can do to get the OS up and running without having to f-disk and reinstall my previous OS? HELP!!

Here's my computer info:
Processor - Pentium-S 166 MHz
Base memory - 640k
Extended memory - 162816k
Award Modular BIOS v4. (ASUS P5A-B ACPI BIOS)

Thanks!
 

Answer:Stop: 0x0000001E error on installation (W2K Pro)

Not sure but in WinME there is a restore WinME in Help... on the left side mid ways down... go to Help & see that
Savvy
 

1 more replies
Relevance 57.4%

Hello, a friend is having crashes after roughly 30-45min. Whether it is sitting idle or under load from games. The old video card failed about a week ago and replaced it with a different and more recent model.
Drivers were uninstalled and the card removed before installing the new card and drivers.
The problem only began after the new video card was installed.
The upgrade was from a GTX 690 to GTX 1080.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1033

Additional information about the problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\071316-69623-01.dmp
C:\Users\Lethal\AppData\Local\Temp\WER-145580-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Answer:BSOD stop: 0X0000001E 0x0000000000000000 after new GPU

Please remove all pirated programs and such from your system before we can start troubleshooting.
The Forum rules is meant for everything regarding piracyDiscussing it,
Asking for guidance,
Asking for a crack,
The use of it,
Etc.





Quote:
4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).

2 more replies
Relevance 57.4%

Not getting BScreens too often, perhaps once every few days. But this is the stop error I get:stop error 0x0000001e (0xffffffffc0000005, 0xfffff80002e86445, 0x0000000000000000, 0xffffffffffffffff)I can't upload the dump files on here.Thank you.

Answer:BSOD stop error: 0x0000001e

Download BlueScreenView:http://www.nirsoft.net/utils/blue_screen_view.htmlunzip downloaded file and double click on BlueScreenView.exe to run the program.when scanning is done, go to EDIT - Select AllGo to FILE - SAVE Selected Items, and save the report as BSOD.txtOpen BSOD.txt in Notepad, copy all of the content, and paste it into your next reply

14 more replies
Relevance 57.4%

hi, all of a sudden when i installed Windows 2000 Professional my pc had worked fine untill i shut it down went out for abit, then when i had switched it back on a Blue screen Appeared saying this:

" *** STOP: 0x0000001E (0xC0000005, 0xBFD6A789, 0x000000000, 0x00000000
KMODE_EXCEPTION_NOT_HANDELED "

I have no idea What this is ( By the way im in Safe mode and it works fine )

My Operating System: Windows 2000 Professional SP4

.... NvidiaDude

Answer:*** STOP: 0x0000001E Error messages :(

check your ram

2 more replies
Relevance 57.4%

Hi all Well last month i had to have a new motherboard fitted to my 2 yr old Window 7 Home Essentials 64 bit pc (which i thought weird given how "new" it is). Anyway when i got the pc back the hdmi sound settings in playback had gone, so i took it back to the shop again, where they said they had "fixed" it, but they hadnt. All they did was remove my avg & spybot search and destroy and replace it with windows home essentials & they updated Explorer to 9 (which i hate & swiftly reverted back to 8). I can watch films & the kids can play games in HDMI, BUT we cant listen to sounds via the monitor or tv, as we previously could (sound settings - playback devices only showing our speakers now, no spfdi (or whatever its called lol) or hdmi device)..i thought i could live without this, so just left it. However over the past 2 wks i have been getting more and more BSOD's (this only ever happened once before, then the new m.b got fitted) and im constantly getting the stop error 0x0000001E followed by other numbers (all 0's). Thursday night i had 4 BSOD's within a matter of 20 mins!! So i left the pc alone till the next day (y'day).
Y'day I did a search on this forum and some one had a similar problem, and they were advised it had something to do with Windows Home Essentials. I unistalled and reinstalled both java and flash, but the problem persisted, so i disabled W.H.E and the problem seemed to have disappeared, wooohooo all day with no problems,kid... Read more

Answer:BSOD - stop: 0x0000001E - Windows 7

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

9 more replies
Relevance 57.4%

Getting very intermittent stop errors,:0x0000001e(0xc0000005,0x080420108,0x0000000,0x00000517) kmode_exception not handled, Address 80420108 Base at 80400000, Date stamp 3d366b8-ntoskrnl.exe, any suggestions would be appreciated.Larry H

Answer:0x0000001e Stop error, ntoskrnl.exe

here is a cool trickput 0x0000001e into a web search engine and see where it takes you.You will get 65,800 hits of which the first 10 are relevent

4 more replies
Relevance 56.99%

Well, every single night for the past 5 days in between 12AM and 8AM my PC has been blue screening. Throughout my PC's life, it's had some problems blue-screening but I've always been able to fix it.

Since June 2009 when I installed my OS, I've had to restore backups at least 3 times, and I used to have a ton of problems with Vista refusing to start, etc., but it always got over it and worked eventually. In fact, up until now I haven't had a BSOD since 2010.

Anyway, the BSOD cited low disk space as my issue. My disk space is that same as it's been for a year, and it's not low, so that can't be the issue. Next I thought about my OCZ Vertex going bad again (I'm on my 3rd one) but that can't be the issue since I performed checks on it and all went well... additionally every time it died before it would simply lock up the computer not BSOD.

Anyway this BSOD really worries me because it happens consistently and I haven't been able to reproduce it during the day. I've tried MemTest (no errors), Prime95 for my overclock (ran for an hour, no errors, stable temps) as well as running my AntiVirus which I thought could be the problem since it runs only at night.

This BSOD is especially bad for me because it increases the risk of data corruption since 3 of my 4 disks are encrypted (the ones with web-server data, only 1 of which I have a recent backup of), as well as because I'm trying to run a website with a virtual machine.

Yes, my PC st... Read more

Answer:STOP 0x0000001E... only at night... data corruption?

Hi -

There are no BSOD memory dumps in the zipped attachment.

Your page file is on drive u:
OS Drive = c:


Code:
AllocatedBaseSize=6441
Caption=U:\pagefile.sys
CurrentUsage=119
Description=U:\pagefile.sys
InstallDate=20101120175610.396000-300
Name=U:\pagefile.sys
PeakUsage=120
Status=
TempPageFile=FALSE

Caption=u:\ 'pagefile.sys'
Description='pagefile.sys' @ u:\
InitialSize=0
MaximumSize=0
Name=u:\pagefile.sys
SettingID=pagefile.sys @ u:
The page file needs to be on OS drive c: to produce memory dumps.

After page file change . . .

Run Driver Verifier - Driver Verifier - Windows 7 & Vista (BSOD-related)

Driver Verifier needs to run 24 hours minimum or until it BSODs your system, whichever is less. Then . . .

Provide full system info - Blue Screen of Death (BSOD) Posting Instructions - Windows 7 & Vista

Also, run Speccy - Download Speccy 1.11.256 - FileHippo.com
- "File" | "Publish Snapshot" | Paste URL into your next post

Regards. . .

jcgriff2

`

1 more replies
Relevance 56.99%

after i moved i booted up my pc and it ran just fine for about 20s then bsod, tried system repair with the windows 7 disc but it says there is no problem, did chkdsk same thing no problem,

Answer:BSOD20s after windows boots up stop 0x0000001e

Welcome to SevenForums.

Perform a clean boot:Troubleshoot Application Conflicts by Performing a Clean Startup
Please follow http://www.sevenforums.com/crashes-d...tructions.html to upload all the files.

1 more replies
Relevance 56.99%

Can you help me please? Same error, my graphic card is G-force 330M,
this problem mainly occurs when I play games.
thank you for help
 

Answer:Blue screen of death ***STOP: 0x0000001e***

This is a problem with your Nvidia video card or its driver. Go here and see if a newer driver is available for download:
http://www.geforce.com/drivers
 

1 more replies
Relevance 56.99%

I have been getting different BSOD but this is the most recent one i occured,Please help because i don't really wanna spend money on fixing my computer..

Thanks in advance guys

Answer:Random BSOD,stop 0x0000001E (0xFFFFFFFFC000328)

Hello spadexhearts and welcome to Sevenforums.

BSOD Analyse

I've seen pointers towards your USB drivers.

Possible fix| Go to Device Manager > Expand the USB list > Right click the first one > Select Properties > Go to the Driver tab > Select Uninstall Driver and do it to all of them.

Let Windows detect them and reinstall them.What kind of USB Devices to you have attached to your hub?

SFC /scannow

We usually ask people to do this command to check if Windows is corrupted. It's the most common one used to check if the Windows files are corrupted. If it'll find errors, it'll restore them.



   Tip
If you're having a custom customization layer on your Aero, it's likely to get restored to default.
Press Start | search 'cmd' | Right-click it
| open as Admin | type SFC /SCANNOW

SFC /SCANNOW Command - System File Checker

Best Regards,
Frederik.

9 more replies
Relevance 56.99%

Hi, according to the guidelines, I'm starting a thread here with my problems.

I keep getting this "STOP 0x0000001E" error on my computer, with no apparent cause. The closest my own troubleshooting has gotten me is to identify a missing driver, or outdated driver. However, upon checking my "Device Manager," everything appears to be up-to-date.

My system information:
DELL Studio XPS Laptop 1640
OS: Windows 7 Home Premium (64-bit)
Processor: Intel(R) Core(TM)2 Duo CPU T9550 @ 2.66GHz 2.67GHz

As per the "BSOD Posting Instructions," I've attached my "Systems Diagnostic Report" and the "BSOD Dump & System File Collection Report" as a single .zip file to this post. Please let me know here if any other information from me is required.

Much thanks.
[EDIT] Whoops, my genius self has forgotten to attach the files. >>

Answer:BSOD: STOP error 0x0000001E (New hardware?)

Perfmon shows issues with your Microsoft Security Essentials software. Please do the following:
- download a fresh copy of the Security Essentials software
- uninstall the current software
- install the fresh copy of the Security Essentials software

MSINFO32 shows:
approximately 97 STOP 0x1E errors blaming the kernel (core of the OS)
5 STOP 0x76 blaming iexplore.exe (unusual)
10 STOP 0x9F blaming USBSTOR (dump files may reveal another driver)

Only 2 dump files were in the upload (5 and 6 Jan 2012) - both were STOP 0x1E
These each blame the kernel (core of the OS) and are memory access errors (c0000005)

Right now I suspect the drivers for your Ricoh memory card reader - as they date from 2006.
Please update them from the PC Manufacturer's website immediately
Then monitor for further BSOD's

If the BSOD's continue, please post back and we'll try Driver Verifier on all 3rd party drivers.

BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\010612-14430-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Fri Jan 6 05:42:32.664 2012 (UTC - 5:00)
System Uptime: 0 days 0:38:16.272
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4977d )
BUGCHECK_STR: 0x1E_c0000005
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: firefox.exe
FAILURE_BUCKET_ID: X64_0x1E_c0000005_nt!_??_::FNODOBFM::_string_+4977d
Bugcheck code 0000001E
Arguments ffffffff`c0000005 fffffa80`064bb7a7 00000000`00000000 000... Read more

4 more replies
Relevance 56.99%

So basically my computer has been crashing a lot lately and I can't figure out if a driver is causing the problem or do I have some faulty software. If anyone can look through my minidump file and see if they can find the problem that would be greatly appreciated.
 

Answer:Blue screen of death STOP: 0x0000001e

*Update*
Motherboard: Gigabyte Technology Co., Ltd. Z97X-Gaming 5
CPU: intel Core i5 4690K @ 3.50GHz
PW: EVGA SuperNOVA NEX 650W 80+ Gold Certified Fully-Modular ATX Power Supply
RAM: Patriot Viper 3 Low Profile Red 8GB (2 x 4GB) DDR3-1866 Memory
Video Card: Asus GeForce GTX 970 4GB STRIX Video Card

Also I forgot to Zip all the files so here they are.
 

4 more replies
Relevance 56.99%

Hi all

1st time poster, recent BSOD sufferer. Zip file attached. This has been happening for maybe a week, not sure. Only change to anything I'm aware of was updating my McAfee subscription from a CD. I'm also running composing software called Finale 2010 and it chugs to a halt and crashes. It's not exclusive to that, it just did it on the desktop yesterday with nothing running.

Thanks for your help!

Answer:Daily BSODs in last week or so - STOP:0x0000001E

Welcome.

McAfee is known to cause BSOD's. Please remove it for testing purpose.

Code:
Start Menu\Programs\McAfee Public:Start Menu\Programs\McAfee Public
Revo Uninstaller:

Use Revo Uninstaller to uninstall stubborn software.

Download and install the software
Opt for Advance Mode while uninstalling which allows you to remove leftover registry.
Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Microsoft Security Essentials is recommended from a strict BSOD perspective, compatibility & stability compared to other internet security software. Malwarebytes is a great combo to MSE. They are free and lightweight.

Also uninstall your existing Antivirus software before you install MSE.

Good and Free system security combination.



   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.




 Clean bootTroubleshoot Application Conflicts by Performing a Clean Startup
Reduce items at start-up. No software except anti-virus is required plus doing this improves the time for logging into windows:How to Change, Add, or Remove Startup Programs in Windows 7
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:Click on the
Type CMD on Search
Left click and Run as Administrator
Ty... Read more

3 more replies
Relevance 56.99%

Hello to anyone and everyone,

I've been having multiple BSOD's, usually being nvlddmkm.sys which I thought I solved when I re-installed my NVidia drivers. I also tried downgrading to the 285, and even upgrading to the 290 revision drivers.

After that the errors came back, but much less frequent.

I am still having these BSOD's unfortunately though. Very rarely when I'm watching videos.

They become more frequent it seems as I start to do/play more demanding things.
Such as if I play Minecraft, I can play it sometimes for 6 hours straight before getting a BSOD, sometimes it might be 4-5 hours though.
But if I play something such as Perfect World International or Skyrim, etc. I get a BSOD sometimes after 2-3 hours of game play, sometimes even less (30 mins-an hour)

I have checked almost everything I can think of and can't figure it out.
I did a mem86 test on each RAM stick over 2 nights, each coming out error free.

My CPU temps stay at about 30c-55c (55c when gaming)
Same with my Video card temps.

----------------
My computer specs are:
- Windows 7 Ultimate x86 (32 bit) Full retail
- AMD Sempron 3100+ 1.80GHz
- NVidia GeForce 9500GT 1GB PCI Express video card
- On board RealTek AC'97 Audio
- Two 1GB RAM sticks (2GBs in total)
- 80GB IDE HDD
----------------
Any help would very appreciated, as we all know how terrible BSOD's can be.
Thanks to anyone who helps out!

Also, if there is more info needed I will provide it, just tell me what it is ... Read more

Answer:BSOD's, nvlddmkm.sys, dxgmms1.sys and STOP: 0x0000001E

Test your Graphics Card
NVIDIA/AMD Video Card - Test with OCCT

3 more replies
Relevance 56.99%

I have an issue where my laptop crashes at varying times, but like at least once per half hour and sometimes a startup for 6 or 8 starts in a row. The BSOD usually says IRQL_NOT_LESS_OR_EQUAL, but sometimes is missing any explanation in that place on the screen The STOP codes are either 0x0000001E or 0x0000000a and there are various parameters following usually including 0x0000000000000000 and ox0000000000000001 or 2 or Z .

My operating system is Windows 7 Home Premium,

I have run malware bytes and a couple other similar tools, disabled and tried to uninstall macafee programs, and I've run windows memory diagnostic tool (extended) at 10 passes, with no irregularities found.

I have run both the debug tol and the diagnostic tool and uploaded results from both.

Please help!
Thank you...

Answer:BSOD with STOP codes either 0x0000001E or 0x0000000a

Code:
Auslogics BoostSpeed BoostSpeed "c:\program files (x86)\auslogics\boostspeed\boostspeed.exe" -usetray helen-HP\helen Startup
Auslogics Browser Care Browser Care "c:\program files (x86)\auslogics\browser care\browsercare.exe" -usetray helen-HP\helen Startup
Uninstall these 2 applications from Control Panel

then....


Code:
fffff880`0a0b70d8 fffff880`01060106Unable to load image \SystemRoot\system32\DRIVERS\iaStor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStor.sys
iaStor+0x39106
Uninstall all Intel Rapid Storage Technology applications from Control Panel and reboot the system

Now you need to completely update Windows 7.


Code:
Host Name: HELEN-HP
OS Name: Microsoft Windows 7 Home Premium
OS Version: 6.1.7600 N/A Build 7600

6 more replies
Relevance 56.99%

Hi Seven Forums! I've been recently getting the BSOD when I open almost any program, when I try to open it my display stops and I get the BSOD error STOP: 0x0000001E. The latest thing I would have downloaded with suspicion would be a game torrent. I've gotten a BSOD error STOP: 0x00000050 and error STOP: 0x0000001a, but mainly error STOP: 0x0000001E. I'm thinking that my RAM is corrupted, I've been searching all night for help and looks like its a memory problem. I'm currently in Safe Mode with Networking. Anyways, sorry for using Winrar, I didn't have 7-ZIP installed.

Answer:BSOD opening almost anything. STOP: Error 0x0000001E

Hello,


Code:
avast! Network Shield Support ROOT\LEGACY_ASWTDI\0000 This device is not present, is not working properly, or does not have all its drivers installed.
Seems Avast might be installed incorrectly. I recommend uninstalling Avast, and use Microsoft Security Essentials - Free Antivirus for Windows . Just for troubleshooting.

Just for safe measures please run a RAM - Test with Memtest86+

Post back results.

-Justin

9 more replies
Relevance 56.99%

I've been getting the BSOD about 2 minutes after startup. During those 2 minutes, I won't be able to open anything and many of my background apps crash. I managed to reach Safe Mode and looking for help now.

Answer:BSOD 2 minutes after startup STOP: 0x0000001E

  
Quote: Originally Posted by Massaddict


I've been getting the BSOD about 2 minutes after startup. During those 2 minutes, I won't be able to open anything and many of my background apps crash. I managed to reach Safe Mode and looking for help now.


Hello there!

Seems like the dump files are very vague not specific cause I can spot. Since Safe Mode is working fine it might be some program in startup or a driver that's not loading in Normal mode.

Enable Driver Verifier Using Driver Verifier to identify issues with Drivers and post us with the updated dump files.

Run SFC Scan SFC /SCANNOW Command - System File Checker

BSOD BUGCHECK SUMMARY


Code:

Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\072812-24632-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Sun Jul 29 10:35:40.431 2012 (GMT+5)
System Uptime: 0 days 0:16:37.633
BugCheck 50, {fffff682ff802070, 0, fffff80002f48160, 5}
Probably caused by : memory_corruption ( nt!MiTrimWorkingSet+c0 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: CCC.exe
FAILURE_BUCKET_ID: X64_0x50_nt!MiTrimWorkingSet+c0
Bugcheck code 00000050
Arguments fffff682`ff802070 00000000`00000000 fffff800`02f48160 00000000`00000005
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\072912-40435-01.dmp]... Read more

3 more replies
Relevance 56.99%

Full stop error: 0x0000001E (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000)

Recent hardware changes: Msi Nvidia GTX 970 installed over a week ago with no problems

Explanation: Hello, I've been having a rough one of it with a problem that started two days ago and still persists. I'm completely unable to perform a normal boot currently, I get the BSOD everytime right after Windows loads and Im about to see the password screen. The problem happened while playing The Crew pc game, an adobe flash update kept forcing priority and taking me out of the game. I kept exiting out, but it would come back. I got frustrated and just hit yes and when it went to install, and before the installer really even started up, my computer went to reboot. When it tried to reboot I got my BSOD error. I initially thought this was a virus then from the update, but my stop error usually deals with driver issues so I've found. Of course, I did several passes of both AVG and malwarebytes, but came up with nothing. I can boot into safe mode fine and I've tried to reinstall my gpu drivers. I installed Driver Genie and tried to update the few that it said were out-of-date as well, only for their installers to not run correctly(this happened twice, for my chipset drivers and another that escapes me right now before giving up on trying the rest). I have also tried to re-seat my graphics card, ram, and boot drive. I also ran just one pass of memtest on my ram and it did fin... Read more

Answer:BSOD during boot, stop error 0x0000001e

Ran Tweaking.com's Windows All-in-one repair, still no luck. Here is an updated file though.
Attachment 342125

1 more replies
Relevance 56.99%

So I bought a new computer for my sister-in-law from newegg (and built it)

She has been getting a few random BSODs, I tried doing a fresh install of windows, her programs and drivers. She claims it only happens once a week, but is scared she will lose work as she uses this computer for her business.

System is running Windows 7 Pro x64 retail
everything is brand new

system specs:
Mobo - gigabyte 880GM-USB3
Proccesor - AMD Phenom II x6 1055T (2.8GHz)
Ram - Gskil DDR3-1333 8GB
Video - Saphire Radion HD5450

Answer:Random BSOD occasionally stop: 0x0000001E

  
Quote: Originally Posted by bitzdv


So I bought a new computer for my sister-in-law from newegg (and built it)

She has been getting a few random BSODs, I tried doing a fresh install of windows, her programs and drivers. She claims it only happens once a week, but is scared she will lose work as she uses this computer for her business.

System is running Windows 7 Pro x64 retail
everything is brand new

system specs:
Mobo - gigabyte 880GM-USB3
Proccesor - AMD Phenom II x6 1055T (2.8GHz)
Ram - Gskil DDR3-1333 8GB
Video - Saphire Radion HD5450



These crashes were caused by memory corruption. Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first ... Read more

1 more replies
Relevance 56.99%

I am running Windows 2000 Professional SP4 and using a wireless USB card to connect to my home network. The USB card is a Dick Smith Electronics (New Zealand) branded one (a cheap one ) which uses a Ralink RT73 chip.

Anyway, whenever I transfer files from this computer to another the copying starts, but doesn't get very far. The computer crashes shortly after starting with Stop: 0x0000001E "KMODE_EXCEPTION_NOT_HANDLED". The file quoted causing the problem is "rt73.sys", which is the driver for the USB card. I have searched the internet and read the Microsoft tech support page about this error and I think the driver is sending requests which the processor cannot understand (or something like that!) I have tried updating the driver, but this has not worked. I have tried the card on a Windows XP computer with the same driver, and it transfers files fine. Any help is greatly appreciated!

(PS. I have also the "PAGE_FAULT_IN_NONPAGED_AREA" error before, but only once.)
 

Answer:Solved: Stop 0x0000001E using wireless adapter

7 more replies
Relevance 56.99%

Hello, I was working on a computer I am refurbishing and most of its problems were worked out (all software; reinstalling Windows and drivers), but when test-running it today, after running for a few hours, I went to check on it and (I think it woke from sleep) then it blue-screened. It had no label, just the stop code 0x0000001E (and then in parenthesis a few, I think 4, 0x00000000). I don't really know what it means, but I have not yet updated the BIOS (updates are avaliable) so I don't know if that would help. Thanks for any help. (Required ZIP attached).
EDIT: The BSOD doesn't list a specific reason. It displays: 0x0000001e (0x0000000, 0x0000000, 0x0000000, 0x0000000).

Answer:Random BSOD, stop code 0x0000001E

Monitor hardware temperature with system monitoring software like Speccy or HWMonitor:
Piriform - Speccy

CPUID - HWMonitor For how to upload a screenshot or file, read here

Test and Diagnose RAM Issues with Memtest86+:RAM - Test with Memtest86+ Pay close attention to part 3 of the tutorial "If you have errors"


   Tip
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

9 more replies
Relevance 56.99%

I'm using win 2000. Been fine for 5years, no BSoD's at all. My niece was on my computer looking at someone's myspace and then it shut down and when it rebooted, I got this fine message:
Stop: 0x0000001E (0xC000005, 0x81DB0C8E, 0x00000001, 0x00000097) KMODE EXCEPTION COULD NOT BE HANDLED.
(sometimes, after a reboot, it has the 1E then 0x000001D, 0xEB41B4E4, 0x81DB4C8E, 0xC0000400)
I went into safemode and did a search for all files modified around the time she was on it. There was some spyware which I deleted after running Hijackthis. I have reduced the amount of virtual memory as well. Unfortunately, my virus program will not run during safemode so I don't know if there's a virus (hijackthis would notice it right?)
I have no idea what all the numbers in the error refer to. If anyone does, that could help me in fixing this and finding out what hardware or driver went haywire.
Can this just happen all of the sudden like this? I have not installed any new hardware or programs for awhile either.
Please help.
thanks
Jeff
 

Answer:STOP: 0x0000001E KMODE EXCEPTION NOT HANDLED

16 more replies
Relevance 56.99%

Hi, my pc recently started to freeze at random, doesn't matter what i'm doing, if playing or watching films or even nothing: the image on the monitor is blocked, mouse and keyboard loose alimentation while the rest of the pc (fans ad cd drives) keep working and the hdd led is off. (all tempereture are low i don't think it's overheating)
Occasionally it also crash with the BSOD error STOP: 0x0000001E (0xFFFFFFFFC0000005, 0xFFFFF80002A891CF, 0x0000000000000000, 0x0000000000000000)

I tried to change tha ram with 3 new corsair 2Gb 1600mhz but it froze anway.
Also i've formatted and reinstalled win 7 on main HD, updated the bios, downloaded all the drivers for the mainboard from the asus site, and the drivers for the video card, but didn't helped.

Another problem (but i don't know if it's related) is that the pc found a RAID controller and it asks the driver for it, but i don't have a RAID controller and i didn't set the hard disk in raid mode in bios, also when i download asus drivers for raid controllers i receive this message: system does not have requirement for the installation,
right at 100% of installation.

Hope i've been clear enough and thank for your help and tell me if i have to give you any other information.

Answer:random freezes and BSOD stop: 0x0000001E

Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Daemon Tools at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
The Sonix USB camera driver is very old.

Code:
fffff880`07483000 fffff880`07eec200 snpstd3 (deferred)
Image path: \SystemRoot\system32\DRIVERS\snpstd3.sys
Image name: snpstd3.sys
Timestamp: Fri Jul 03 07:10:16 2009 (4A4D6180)
CheckSum: 00A708DC
ImageSize: 00A69200
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Sonix Technology Co., Ltd.

And, Disable USB Selective Suspensd too.
USB Selective Suspend - Turn On or Off

For the USB devices, first, detach all the USB devices other than the keyboard and mouse.
Then, Update the drivers for them... Read more

9 more replies
Relevance 56.99%

All,

New the the forums, but frustrated and though maybe somebody could help me out. I get this random stop error (above) randomly when playing MMORPGs. I have tried a fresh install of Win7 Home Premium x64, but the error persists. I have tried to flash the BIOS, but get errors erasing blocks in the flash. Perhaps someone can help guide me. I do not want to shotgun hardware, but at this point, I am willing to try just about anything.

Answer:BSOD and Stop Error 0x0000001E - Sporadic

Hello sluggo97.

Avast is causing some problems there.

Code:
fffff880`055487d8 fffff880`03f05905Unable to load image \??\C:\Windows\system32\drivers\aswMonFlt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswMonFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for aswMonFlt.sys
aswMonFlt+0x21905
Description here: http://www.carrona.org/drivers/drive...=aswMonFlt.sys

Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

You have reasons to do some more extensive system scan.

Code:
fffff880`05548ef8 fffff880`010f9000 ataport!ChannelSyncAcpiEvalMethod <PERF> (ataport+0x0)
fffff880`05548f00 fffff880`01110930 ataport!__PchSym_ <PERF> (ataport+0x17930)
fffff880`05548f08 fffff880`010f9000 ataport!ChannelSyncAcpiEvalMethod <PERF> (ataport+0x0)
fffff880`05548f10 fffff880`01110924 ataport!__PchSym_ <PERF> (ataport+0x17924)
fffff880`05548f18 fffff880`010f9000 ataport!ChannelSyncAcpiEvalMethod <PERF> (ataport+0x0)
fffff880`05548f20 fffff880`01110840 ataport!__PchSym_ <PERF> (ataport+0x17840)
fffff880`05548f28 fffff880`010f9000 ataport!ChannelSyncAcpiEvalMethod <PERF> (ataport+0x0)
fffff880`05548f30 fffff880`01110834 ataport!__PchSym_ <PERF> (ataport+0x17834)
... Read more

7 more replies
Relevance 56.99%

Really need your help.

My HP laptop keep crashing and we get the blue screen whenever we log on in Administrator accounts. When I log on as Guest it doesn't crash. The BSOD starting happening after one of my friends used my browser.

I've attached the SevenForums zip file

Thank You!

Answer:BSOD when logged on as Administrator, STOP: 0x0000001E

What did your friend do? What websites did he visit? Did he download anything?

Can you boot into safe mode as an administrator? If so, I would create a new account with administrator rights, then log in as the new administrator to see if the BSODs continue. I would also do a complete virus scan while in safe mode, because my first thought is that your friend got your system infected.

2 more replies
Relevance 56.58%

Hi there, I just got a BSOD out of nowhere whilst sending an email on Chrome (Outlook).

I had some BSOD problems a while back, which was due to a faulty RAM stick, which has now been fixed (Corsair sent me a new pair as they were under lifetime warranty).

So the first thing I did was run MemTest 86, and inital results make it seem completely fine, so the RAM's not the issue here.

I've attached a pic of the BSOD and a BSOD log dump.

Thank you!

Answer:BSOD whilst sending an email on Chrome, error 0x0000001E

There hasn't been a dump recorded since the 5th last month.
Please make sure your pc is configured for small dump files How to configure minidump | Windows 7 tutorial

Please run CPU-Z | Softwares | CPUID, open it and make screenshots of the following tabsCPU
Mainboard
Memory
SPD*
Graphics
*SPD shows the details of each module, you can show the details by choosing different slots in the left upper corner.
Please make screenshots of each module.

Please post each screenshot in your next reply/replies.

4 more replies
Relevance 56.58%

About once a month I get a BSOD, just surfing via Chrome and listening to music. However yesterday and today I had a BSOD. It is always the 0x0000001E error, but I have no clue what to do about this.

I attached both the dump from yesterday and the one of today.

Anyone got some advice for me?

Answer:BSOD using Google Chrome and Windows Media Player 0x0000001E

Sorry, but you did not provide any information about your system and only provided two .dmp files. This makes it very difficult to determine the cause of the crashes. Please follow the http://www.sevenforums.com/crashes-d...tructions.html to provide us with more specific information so we can give better troubleshooting steps. Also, fill in your system specs in your profile (not in your next post) by using System Info - See Your System Specs as a guide. Thank you.
The only thing your .dmp files may have in common is memory problems or drivers...If you are overclocking any hardware, please stop.

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

If you swap any memory components, follow these steps for ESD safety:Shut down and turn off your computer.
Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an an... Read more

1 more replies
Relevance 56.17%

Hey there, recently I downloaded sketchy winrar file with an .exe file in it to my laptop which I opened and that then proceded to open a bunch of dos prompt type windows, so I guess it was a virus. anyways after all that I got a blue screen of death with a STOP: 0x0000001E (0xC0000005, 0x00000000, 0x00000000, 0x00000000) KMODE_EXCEPTION_NOT_HANDLED error. When I tried to reboot I got the same thing again so it was pretty much a loop. Eventually I figured out that if I disconnected my network/internet cable I could boot up fine and run windows without any problems. I deleted all of the malicious files and ran a virus scan that showed nothing was wrong but Im pretty sure the virus did something to my registry because whenever I try to reconnect to the internet I get this same blue screen error.

Any help would be greatly appreciated. Thanks

oh I forgot to mention I am running windows 2000 professional
 

Answer:STOP: 0x0000001E KMODE_EXCEPTION_NOT_HANDLED error when connecting to internet

bryman1999 said:



Hey there, recently I downloaded sketchy winrar file with an .exe file in it to my laptop which I opened and that then proceded to open a bunch of dos prompt type windows, so I guess it was a virus. anyways after all that I got a blue screen of death with a STOP: 0x0000001E (0xC0000005, 0x00000000, 0x00000000, 0x00000000) KMODE_EXCEPTION_NOT_HANDLED error. When I tried to reboot I got the same thing again so it was pretty much a loop. Eventually I figured out that if I disconnected my network/internet cable I could boot up fine and run windows without any problems. I deleted all of the malicious files and ran a virus scan that showed nothing was wrong but Im pretty sure the virus did something to my registry because whenever I try to reconnect to the internet I get this same blue screen error.

Any help would be greatly appreciated. Thanks

oh I forgot to mention I am running windows 2000 professionalClick to expand...


Link: http://support.microsoft.com/kb/252935
 

3 more replies
Relevance 56.17%

HELP please!what should i do with all that? :/ will highly appreciate any help ==================================================Dump File         : 060214-15537-01.dmpCrash Time        : 02.06.2014 21:46:14Bug Check String  : KMODE_EXCEPTION_NOT_HANDLEDBug Check Code    : 0x0000001eParameter 1       : ffffffff`c0000005Parameter 2       : fffff800`02c5df4fParameter 3       : 00000000`00000000Parameter 4       : 00000000`00000020Caused By Driver  : ntoskrnl.exeCaused By Address : ntoskrnl.exe+71f00File Description  : NT Kernel & SystemProduct Name      : Microsoft? Windows? Operating SystemCompany           : Microsoft CorporationFile Version      : 6.1.7600.16385 (win7_rtm.090713-1255)Processor         : x64Crash Address     : ntoskrnl.exe+71f00Stack Address 1   : Stack Address 2   : Stack Address 3   : Computer Name     : Full Path         : C:\Windows\Minidump\060214-15537-01.dmpProcessors Count  : 4Major Version     : 15Minor Version     : 7600Dump File Size    : 291 608Dump File Time    : 02.06.2014 21:50:32==============================================================================================... Read more

Answer:Windows 7 Ultimate Blue Screen Stop: 0x0000001E

You've had 3 different bsod's in one day. That typically points to either malware or hardware failure. Let's try some basic steps:1) Please run full system scans with BOTH your installed anti virus app and with MalwareBytes2) To check the ram, download memtest (http://memtest.org/). Burn it to a cd using a dedicated .iso burning utility (http://www.petri.co.il/how_to_write_iso_files_to_cd.htm), make sure the cd drive is at the top of the boot order in bios, then boot to the newly created cd and run the utility.3) Hard Drive Diagnostics:http://www.tacktech.com/display.cfm?ttid=287 Make sure you select the tool which is appropriate for the brand of your hard drive.Depending on the program, it'll create bootable floppy, or bootable CD.If downloaded file is of .iso type, use ImgBurn: http://www.imgburn.com/ to burn .iso file to a CD (select "Write image file to disc" option), to make the CD bootable.For Toshiba drives, see here: http://sdd.toshiba.com/main.aspx?Path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnosticLet's see where we are after these three troubleshooting steps.

4 more replies
Relevance 56.17%

Hey there, recently I downloaded sketchy winrar file with an .exe file in it to my laptop which I opened and that then proceded to open a bunch of dos prompt type windows, so I guess it was a virus. anyways after all that I got a blue screen of death with a STOP: 0x0000001E (0xC0000005, 0x00000000, 0x00000000, 0x00000000) KMODE_EXCEPTION_NOT_HANDLED error. When I tried to reboot I got the same thing again so it was pretty much a loop. Eventually I figured out that if I disconnected my network/internet cable I could boot up fine and run windows without any problems. I deleted all of the malicious files and ran a virus scan that showed nothing was wrong but Im pretty sure the virus did something to my registry because whenever I try to reconnect to the internet I get this same blue screen error. :cry

Any help would be greatly appreciated. Thanks
 

Answer:STOP: 0x0000001E KMODE_EXCEPTION_NOT_HANDLED error when connecting to internet

sorry, forgot to mention, I am running windows 2000 professional
 

2 more replies
Relevance 56.17%

Hello all,

A few days ago my computer began experiencing random BSOD. I wish I knew was precipitated it, but I cannot. It seems random. Sometimes it happens when opening a browser. Other times it crashes on bootup. It gives me the stop error of 0x0000001e and says IRQL_NOT_LESS_OR_EQUAL. It's crashes three times while trying to post this.

Here is the 'grab all' file. Oh please don't crash while attaching it. . .

Thank you in advance.

Answer:Random BSOD, IRQL_NOT_LESS_OR_EQUAL, stop error 0x0000001e

Welcome to SevenForums

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.


Code:
fffff880`033bd9c8 fffff880`02eba8d1Unable to load image \??\C:\windows\system32\Drivers\SYMEVENT64x86.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SYMEVENT64x86.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEVENT64x86.SYS
SYMEVENT64x86+0xc8d1
Norton Internet Security / SYMEVENT64x86.SYS / Source: Carrona.org

The antivirus you are currently using is known and contributing to your BSOD crashes, consider uninstalling it with the Norton Removal Tool and replace with Microsoft Security Essentials at least to test.Norton Removal Tool
Recommended antivirus program for Windows 7 based on stability compared to others:- Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes - The Free version
Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Get the latest version/drivers for the Intel Rapid Storage stuff ... Read more

8 more replies
Relevance 56.17%

This is the bluescreen message: (if someone has posted the same already and I did not find it, I apologize, please point it to me)*** STOP: 0x0000001E (0xFFFFFFFFFC0000005, 0xFFFFF8800333C630,0x000000000000000, 0x000000000000000)Thanks for any help!

Answer:Windows 7 Ultimate Blue Screen Stop: 0x0000001E

Download BlueScreenView:http://www.nirsoft.net/utils/blue_screen_view.htmlunzip downloaded file and double click on BlueScreenView.exe to run the program.when scanning is done, go to EDIT - Select AllGo to FILE - SAVE Selected Items, and save the report as BSOD.txtOpen BSOD.txt in Notepad, copy all of the content, and paste it into your next reply

12 more replies
Relevance 56.17%

Here is a screenshot of the BSOD itsself and also got a copy of the error report

Attachment 341393


Code:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 2057

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000094
BCP2: FFFFF8800C670D60
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\112314-13993-01.dmp
C:\Users\The Riddy\AppData\Local\Temp\WER-14040-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Full specs are as follows can be provided if needed

Answer:Need help with Random Blue screen of death ***STOP: 0x0000001e***

Please follow Blue Screen of Death (BSOD) Posting Instructions

4 more replies
Relevance 56.17%

This screen pops up as soon as I turn on wireless and connect to the Internet.  It started this morning after I downloaded what I thought was a "Print to PDF" application from www.digitaltrends.com.  Instead, I got a bunch of apps included
Bubble Dock, Chromium, Driver Restore, and more.  I was able to uninstall everything except a folder labeled Coupoon.
*** STOP: 0x0000001E (0xFFFFFFFFC00000094,0xFFFFFF8000C074D1E,0x0000000000,0xFFFFFFFFFFD)
Windows 7 Pro
Any ideas would be helpful, thank you!

Answer:STOP: 0x0000001E (0xFFFFFFFFC00000094,0xFFFFFF8000C074D1E,0x0000000000,0xFFFFFFFFFFD)

Your time is so far off you will not get updates (or anything else)  It appears you aare on a domain, if this is not correct you are running a pirated key.
Your broadcom driver is corrupt and need re-installation
Your BIOS is corrupt and needs updatin

Adobe reader is corrupt
Etc, etc, etc.  Your best bet is a clean install
Wanikiya and Dyami--Team Zigzag

11 more replies
Relevance 56.17%

Here is a screenshot of the BSOD itsself and also got a copy of the error report

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 2057

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000094
BCP2: FFFFF8800C670D60
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\112314-13993-01.dmp
C:\Users\The Riddy\AppData\Local\Temp\WER-14040-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Full specs are as follows can be provided if needed
 

Answer:Random Blue screen of death ***STOP: 0x0000001e***

Go to C:\Windows\Minidump\ and select all the .dmp files. Right-click sending the files to a compressed(zipped)folder. Upload this folder as a file here, so we can read and decode them
 

5 more replies
Relevance 56.17%

Hi I hope someone can help with my BSOD problem... Here are the details...

Is Windows 7 Home Premium . . .
- x86 (64-bit)
- I've restored the original installed OS on the system using 'Restore Factory Settings'
- an OEM version?
- The age of system (hardware) is 11 months old
- I've reinstalled the OS because of this BSOD problem but I'm still getting the same problem.

This problem started a couple of weeks ago, I always have a BSOD on a cold boot, usually in the morning when I switch it on. It also occurs if I shut down the comp for a significant length of time. I never have this problem if I warm boot (restart) the comp, no matter how many times I restart it doesnt happen!

I thought maybe I had a virus so reinstalled the OS on the C drive twice, once from a disc backup I know is clean, and once from the partition. The BSOD came back after both instances. I've followed your BSOD posting guidelines and have included the zipped Windows_NT6_BSOD_jcgriff2 folder and system health report.

Any help with this would be very much appreciated, and I thank you in advance.

P.S. If any more info is needed let me know, I'll be monitoring this thread regularly!

Cheers

Answer:BSOD on cold boot - stop code 0x0000001E

Code:
Loading Dump File [C:\Users\Mike\Downloads\BSODDmpFiles\alcatraz\Windows_NT6_BSOD_jcgriff2\011212-27003-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\users\mike\documents\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`03064000 PsLoadedModuleList = 0xfffff800`032a9670
Debug session time: Thu Jan 12 05:48:45.501 2012 (UTC - 7:00)
System Uptime: 0 days 0:08:39.000
Loading Kernel Symbols
...............................................................
................................................................
..................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

Probably caused by : hardware ( volmgr!VmReadWrite+bf )
... Read more

9 more replies
Relevance 55.76%

I have been having random crashing/ freezing for the last week now, if anybody can help me, please, please help me. I will upload my mini dumps from the crashes.
 

Answer:Hourly BSODs on Win 7 Home Premium, error STOP: 0x0000001E

hey master 972542 welcome to TS ,
OK for some reason it wont let me open the minidum on this PC dam thing so will have a look when i get home however some of the usual suspects that cause this error are:
Device driver, hardware, System service, compatibility, memory, BIOS

Yhu could run a file system check first. To do that type cmd in search>right click and run as admin>sfc /scannow (note the space between sfc and "/"). Also make sure that yhu have the most upto date device drivers for yhur hardware etc. let us know what happens

Hope this helps
James
 

4 more replies
Relevance 55.76%

After viewing the dump files in BlueScrennView, I found that it is the problem of NETIO.SYS.
Please help!
Download: dump files, blue screen

More replies
Relevance 55.76%

Running Win2000 sp3, Norton systemworks 2003, zonealarm pro, and GoBack. When I use the floppy drive, I get the following in a blue screen:
STOP: 0X0000001E (0XC0000005, 0X80004001, 0X00000001, 0X00000006) KMODE EXCEPTION NOT HANDLED
ADDRESS 80004001 BASE AT 80001000, DATE STAMP 3C989E09 HAL.DLL

This is the only time I get this error. I am simply trying to write or read a floppy. I have all drivers up to date.
 

Answer:[Resolved] Stop Error 0x0000001e {floppy drive access}

16 more replies
Relevance 54.94%

Hey everyone!

For the past few weeks that I've been playing Star Wars: The Old Republic, I've been getting BSOD's every time I play. I've noticed that it only happens when I'm playing SWToR. I tried to fix the error by reformatting my computer, which didn't help. I've run memtests, switching the RAM cards around, etc., again to no avail. Any information you guys could give me would be great, I'm really getting to my wits end here.

Thank you!

Answer:BSOD while playing Star Wars ToR, stop error code 0x0000001E

There seems to be a problem with your Windows activation. Please post this report: Activation Issue Posting Instructions

7 more replies
Relevance 54.94%
Answer:BSOD playing World Of Tanks, Technical information ***STOP: 0x0000001E

These crashes were caused by memory corruption (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Start... Read more

8 more replies
Relevance 54.94%

Hello everyone,
This will be my first post on the Win7 forums, so please excuse me for sounding like a bit of a newbie.
Starting about 3 weeks ago, I began receiving BSOD's with the stop code: 0x0000001E. After having my computer checked by the Geek Squad in Best Buy, they couldn't really tell me what the issue was but were pretty certain it was a driver issue. They also did a full system diagnostic and my hardware was determined not to be the issue. This lead to them uninstalling and reinstalling the video card (Nvidia Geforce GTX 560) and they had me on my way. But to no avail for last night, when I was gaming, (Borderlands co-op) I received a BSOD with the pre-mentioned code. I copied down the code, and restarted my computer. Like every time before, (this was 3 BSOD's in total) I noticed that my Wireless USB Adapter (Linksys AE2500 Dual-Band) was not recognized upon start-up and was quite hot to the touch. I disconnected and reconnected the device, which worked. To make a long story short, I have basically pinned the issue down to my wireless adapter. But what does everyone think? Would this diagnosis make sense? I uninstalled and re-installed the adapter driver, but does is this enough? Thank you in advance for any help, it would be greatly appreciated.

System Specs:
(pre-built Cyberpower PC)
AMD FX-8 Core Processor
Nvidia Geforce GTX 560
8 GB RAM
1 TB HD
Gigabyte M68MT-S2 Motherboard

Answer:BSOD Stop Code 0x0000001E While Gaming, Wireless USB Adapter Issue?

Please follow the http://www.sevenforums.com/crashes-d...tructions.html so we can assis t you better.

-Justin

2 more replies
Relevance 54.53%

Hi, this is my first post, so I hope I can provide everything needed.

ISSUE: I have been getting multiple BSOD for several months, came on this forum a couple months ago, and read other posts, and then updated my bios version (flashed it) and that seemed to help for awhile, but getting BSOD's and computer lock ups more and more.

The BSOD's are typically have a stop error message in them. Most recently, Stop: 0X0000001E, 0Xffffffffc0000005, 0Xfffff8000zfb43fa, 0x000000000001, x000000000018.

Also, the computer has been randomly locking up (mouse doesn't move) requiring a reboot, and other times, the system is just automatically rebooting.

Lastly, and more recently, occasionally my computer says it can't start, and does a 'error check' when booting up. Not always, but sometimes, rebooting 1-2X and it goes away. I've also noticed a strange sound (hard drive?) when booting up which started about a month ago, but after the initial BSOD's. I ran the short Seagate HD tests, and they came back clean so far. Will try to run Memtest and post.

Any help is much appreciated. Attaching the performance report and zip of the dump files. Thanks. -JC

Computer specs: Purchased this as build to order about 3 years ago. 64 bit, Asus 6pt Motherboard X58 chipset, I7 Quad Core Processor (920 2.6Ghz), 1 GB video card (9800GT), 6 GB memory, Windows 7 home premium.

Answer:Multiple BSODs, Stop Error 0X0000001E, computer locks up/auto reboots

Well, I guess I need help with how to upload the performance report and zip folder with the dump files acccording to the BSOD post instructions. I zipped it up in a folder using the windows zip option, but the attachment (paper clip) won't attached the folder, it wants me to pick a specific file. There is like 80-100 files in the folder, so don't think I want to attach them all. Anyone know how to attach a zip folder?

9 more replies
Relevance 50.43%

Hello,

A few days ago I got a random BSOD with the 0x0..1E stop error. Now my computer will rarely boot and when it does it still randomly gets the same BSOD. I once got a 1D stop error but its mostly 1E that keeps happening. I run Windows 7 Professional 64-bit and this time I used a Windows DVD to start up my computer. One time and only one I got the error message (while booting the computer) "BOOTIMGR corrupt, system couldnt boot" or something like that. I restarted my computer after I saw that and it was gone. I've attached two ZIP files of two different .dmp files that were created today with about 15-20 minutes in between them. Is there something wrong with my bios? If not, what could it be?

Thank you for any support, greatly appreciated

Answer:Random BSOD stop error 0x0000001E, hardware error?

Also maybe worth noting that I had not updated drivers in a while, right after posting this I updated my monitor's drivers. The rest were up to date.

3 more replies
Relevance 50.02%

I am typing this original post from my cellphone because that is where I wrote the blue screen error finally once it started happening frequently, just today so please do forgive me if I am missing anything but I'll come back on my Desktop and try to finish anything needed in the post once I submit it from my phone.

Here is the error message:
STOP:
0x0000001E (0XFFFFFFFFC0000005, 0XFFFFF80003281DC2, 0X0000000000000000, 0X000000000000020)

I will let you know right off the bat that I am definitely not a techie so this is all very confusing to me. Please any help would be extremely appreciated!! Thanks again I'm advance!

Now before I came here to post, I did do a few hours of research and eventually took the following steps.

1. I have reinstalled my Nvidia Graphics Driver.
2. I have deleted, uninstalled, cleaned up a great deal of space on my desktop.
3. I have used Safe Mode to enter my Device Manager where I looked at my Network Adapters and made sure that all of them were up to date, this was easy because I only had 3 network adapters. The first two were both up to date. The third one is "Microsoft Virtual Wifi Miniport Adapter" which wouldn't allow me to update because it said it was not from a "trusted source" and windows didn't want to authorize. For this reason I just right-click and Disabled it.
4. I have run SFC /scannow from cmd as Administrator. The results:
"Windows Resource Protection did not find any integrity violations... Read more

Answer:BSOD Random and Random Restarts, Help plz! (STOP: 0x0000001E )

Hello oksm08, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

1 more replies
Relevance 45.51%

I need help in getting rid of all of the annoying pop up ads that continuously pops up, I googled the sponsor of the ad and I seen multiple replies saying it was a program that was downloaded on the computer, I can't find any new or programs that don't belong to see the difference. Two months ago I upgraded to the free Windows 10, I am sure that's most likely the time I started to see the pop ups from any click on any website. These are the websites the ads clicks to addsonjet.com & regnok.com, sponsored by Royals. I want to know what would be the best solution to rid of these pop ups, I currently use google chrome as my web browser and I have tried to use many ad blockers from the chrome web store to stop the pop up ads but nothing seems to work. I use Bit Defender as my virus protection and I see no help from Bit Defender to stop it in which I am sure its not suppose to help stop them. I also have added these websites to my pop up ads to block under the google chrome setting and nothing. I would appreciate any help anyone can give me to help me out on this. ThanksEdit: Moved topic from Introductions to the more appropriate forum. ~ Animal

Answer:Stop Pop Up Ads on Google Chrome

Welcome to BC !
 
Start with using the programs below to find and remove the adware and malware causing the problem.
 
Use CCleaner to remove Temporary files, program caches, cookies, logs, etc. Use the Default settings. No need to use the
Registry Cleaning Tool...risky. Pay close attention while installing and UNcheck offers of toolbars....especially Google.
After install, open CCleaner and run by clicking on the Run Cleaner button in the bottom right corner.
CCleaner - PC Optimization and Cleaning - Free Download
 
Download Malwarebytes' Anti-Malware from Here
Double-click mbam-setup-2.X.X.XXXX.exe to install the application (X's are the current version number).
Make sure a checkmark is placed next to Launch Malwarebytes' Anti-Malware, then click Finish.
Once MBAM opens, when it says Your databases are out of date, click the Fix Now button.
Click the Settings tab at the top, and then in the left column, select Detections and Protections, and if not already checked place a checkmark in the selection box for Scan for rootkits.
Click the Scan tab at the top of the program window, select Threat Scan and click the Scan Now button.
If you receive a message that updates are available, click the Update Now button (the update will be downloaded, installed, and the scan will start).
When MBAM is finished scanning it will display a screen that displays any malware that it has detected.
Click the Remove Selected button.
MBAM will now delete all of the files and registry ... Read more

1 more replies
Relevance 45.51%

Chrome opens then crashes, says 'not responding' and closes every time I try to open it. Have tried turning laptop on and off, internet is working fine with other browsers, also tried uninstalling and installing again but still has same problem. It is the only browser I like using so it would be good to sort it out.

Answer:how to stop chrome from crashing?

Have you tried uninstalling Chrome and re-installing it?There are repair options here:http://www.wikihow.com/Repair-Googl...Always pop back and let us know the outcome - thanks

2 more replies
Relevance 45.51%

i am actually using xp pro. the thing wouldn't let me change it here.i am using firefox, with noscript. i do not have chrome anywhere on this computer. when i did try to install it, the thing said that my hardware didn't support chrome.yet, i keep getting stupid chrome unresponsive script messages, either browser, or noscript overlay.how do i completely stop this chrome menace from even trying to write script? on a couple of sites, it causes it to take almost half an hour to load a page.

Answer:how can i stop chrome script?

You have something going on that is not normal.Please download Farbar Recovery Scan Tool and save it onto your Desktop. If your default download location is not the Desktop, drag it out of it's location onto the Desktop.http://www.bleepingcomputer.com/dow...Note: You need to run the version compatible with your system. If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.Double-click to run it. When the tool opens click Yes to disclaimer.Press Scan button.It will make a log (FRST.txt) on the Desktop.The first time the tool is run, it makes also another log (Addition.txt). The logs are large, upload them using this, or upload to a site of your choosing. No account needed. Give us the links please.http://www.zippyshare.com/

37 more replies
Relevance 45.51%

If I'me using Chrome, then click on a link, instead of taking me to the site, I get waylaid by Gossipcenter or Searchsomething or etc etc.
How can I stop this please?

Answer:Chrome hijacking can I stop this?

Download the free version of free SAS, http://www.superantispyware.com/superantispywarefreevspro.html , then update. Check in programs and features for any unfamiliar tool bars etc. and remove. Check chrome's extentions and remove anything unfamiliar. Reboot to safe mode and run a full scan of SAS and delete what it finds. In normal mode open Chrome again to see if ok.

1 more replies
Relevance 45.51%

Im currently using google chrome on xubuntu linux and it is wonderful.
Does anybody know how i can stop chrome from using the disk cache and remembering history etc.?

Thank you.
 

More replies
Relevance 45.51%

Hi there
I have a personal google account and a work google account. I have now discovered that when using Chrome, it is syncing my search history. So stuff I am searching for at home (which I may not really want to share with my work) is showing up on my work Chrome search history. I have tried logging out of my home account completely, but I am not sure this is enough. I am now facing the prospect of having to stop using Chrome completely because I cannot have this situation. Hope someone can help with this!

Answer:How do I stop Chrome from syncing?

Are these two distinct computers ? If so go into the work one, log onto your Work Google account open Settings, look at Sign In, to it there is a Blue underlined section saying Google Dashboard, click on it and it should open a new tab entitled Chrome Sync there's a button on the bottom of the page that says "Stop and Clear" click it and your syncd data should be cleared and not replaced.
If however it's just a single installation with two accounts on one machine I don't think Chrome can distinguish who has carried out searches, it just retains the lot.

3 more replies
Relevance 45.1%

Hey everyone. I have the latest version of Chrome and it is 64 bit version of Chrome. Anyway, web pages keep becoming unresponsive and I have to click either the "Wait" button or the "Kill it" button to fix it. If I hit the "Wait" button then I get the same message again after a few seconds and so I have to "Kill it". I have no idea why the web pages keep becoming unresponsive and I would greatly appreciate help in fixing this.
 

Answer:Web pages won't stop becoming unresponsive in Chrome.

7 more replies
Relevance 45.1%

EVERY SINGLE TIME I open the wonderful Edge browser, i get asked if I want to install Google Chrome; I've told it 20 times I am NOT INTERESTED, but it still keeps up this stupid behavior..

How long until the "so called browser" works properly? It STILL doesn't save any of my passwords, once I open and close Edge even though I have told it endlessly to save them..

I have reported these bugs endlessly to MS...

Edge will NEVER become a mainstream browser at this rate..

More replies
Relevance 45.1%

Hi Forum,

There's webpage I need to visit often, but omg the webpage contains shitty music. I don't find a place to stop the music on the webpage in chrome.

Thank you.

Edit: I just tried it with Firefox. It perfectly stopped that shit. But how do I stop it with chrome?

Answer:How to stop the music on a webpage with Chrome?

I'm sure there are other extensions, but something like this would work

Mute Video/Music Sounds in Google Chrome - Stop Sounds in Tabs

A Guy

2 more replies
Relevance 45.1%

Earlier this year, we announced that Google Chrome would continue support for Windows XP through the remainder of 2015. At that time, we strongly encouraged users on older, unsupported platforms such as Windows XP to update to a supported, secure operating system. Such older platforms are missing critical security updates and have a greater potential to be infected by viruses and malware.

Today, we?re announcing the end of Chrome?s support for Windows XP, as well as Windows Vista, and Mac OS X 10.6, 10.7, and 10.8, since these platforms are no longer actively supported by Microsoft and Apple. Starting April 2016, Chrome will continue to function on these platforms but will no longer receive updates and security fixes.

If you are still on one of these unsupported platforms, we encourage you to move to a newer operating system to ensure that you continue to receive the latest Chrome versions and features.

Posted by Marc Pawliger, Director of Engineering and Early Notifier
Google Chrome Blog: Updates to Chrome platform support
 

More replies
Relevance 45.1%

Earlier this year, we announced that Google Chrome would continue support for Windows XP through the remainder of 2015. At that time, we strongly encouraged users on older, unsupported platforms such as Windows XP to update to a supported, secure operating system. Such older platforms are missing critical security updates and have a greater potential to be infected by viruses and malware.

Today, we?re announcing the end of Chrome?s support for Windows XP, as well as Windows Vista, and Mac OS X 10.6, 10.7, and 10.8, since these platforms are no longer actively supported by Microsoft and Apple. Starting April 2016, Chrome will continue to function on these platforms but will no longer receive updates and security fixes.

If you are still on one of these unsupported platforms, we encourage you to move to a newer operating system to ensure that you continue to receive the latest Chrome versions and features.

Posted by Marc Pawliger, Director of Engineering and Early Notifier
Google Chrome Blog: Updates to Chrome platform support
 

Answer:Chrome stop supporting Vista and XP, Mac 10.6-8

Too bad for Vista since because of continuous decline on market shares, it can already influence other products to think twice for development support.
 

1 more replies
Relevance 45.1%

My sister called me yesterday to help her with a nuisance problem that she has with Google Chrome.
She has just started using Chrome and every time she launches it, within a minute or two, Google Chrome Help pops up over the top of whatever she was doing.
I'm assuming that this is a new tab which launches automatically until you click some sort of "Don't appear again" checkbox. But as I'm not a Chrome user (and my sister is a very inexpert computer user!) I can't explain to her exactly what to do to stop this.
Can anyone please explain exactly how to stop this Help tab from opening up automatically?

Answer:How to stop Google Chrome Help from popping up?

I have just put "How to stop Google Chrome Help from popping up" (your title heading) in a Google search and many suggestions came up, including YouTube video's.
Far to many to provide links to, so perhaps try a quick Google search for some ideas and possible solutions?.

4 more replies
Relevance 45.1%

EVERY SINGLE TIME I open the wonderful Edge browser, i get asked if I want to install Google Chrome; I've told it 20 times I am NOT INTERESTED, but it still keeps up this stupid behavior..

How long until the "so called browser" works properly? It STILL doesn't save any of my passwords, once I open and close Edge even though I have told it endlessly to save them..

I have reported these bugs endlessly to MS...

Edge will NEVER become a mainstream browser at this rate..

Answer:How do I stop edge from asking me to install Chrome???

I very much doubt it will be Microsoft trying to get you to install Google Chrome, it will be Google either in a direct or indirect way.

I must admit I'm also getting fed up with constantly being told to install Chrome too, but Google's heavy-handed tactics shouldn't really come as a surprise as I read recently that Google even pay partners such as mobile carriers and phone manufacturers a slice of the pie by being pro-Google.

Where are you seeing the prompts, in the actual webpage like this or somewhere else?

20 more replies
Relevance 44.69%

Recently every time I start Google Chrome I get a message "This computer will soon stop receiving Google Chrome updates because it's hardware is no longer supported". When I click on the link "Learn more" it displays the Chrome system requirements which my computer meets.

So what is going on?

I am running Windows XP SP3

Answer:Computer To Stop Receiving Chrome Updates

Hello PinguJohn

this is due to your system running WXP. As MS has stopped supporting XP alot of major vendors are not going to keep updating their products to be compatible with WXP.

Google does advise that they will support Chrome on WXP until April 2015

1 more replies
Relevance 44.69%

The home page of chrome seems to have been hihacked by a russian style page, All the usual processes seem not to be able to prevent the hijack returning all the time.

Answer:How do I stop the home page in chrome being hijacked

Here are the first 2 steps, there will be more steps needed, after I see the results of these logs.Run them in this order.Step 1: Run AdwCleaner http://www.softpedia.com/get/Antivi...http://www.raymond.cc/blog/adwclean...http://www.bleepingcomputer.com/dow...Author's sitehttp://general-changelog-team.fr/en...Tutorialhttp://general-changelog-team.fr/en...Close all open programs and internet browsers.Double click on AdwCleaner.exe to run the tool.Click ScanIn the results tabs, uncheck anything you don't want to remove.Click on Cleaning.Confirm each time with Ok.Your computer will be rebooted automatically. A text file will open after the restart.Please Copy & Paste the contents of that logfile with your next answer.You can find the logfile at C:\AdwCleaner[S1].txt as well.http://i.imgur.com/r3PoAEG.gifStep 2: Run Junkware Removal Toolhttp://www.softpedia.com/get/Securi...http://www.bleepingcomputer.com/dow...http://thisisudax.org/http://thisisudax.blogspot.com.au/2...Malwarebytes Acquires Junkware Removal Tool https://blog.malwarebytes.org/news/...Download Junkware Removal Tool onto your Desktop. If your default download location is not the Desktop, drag it out of it's location onto the Desktop.Warning! Once the scan is complete JRT will shut down your browser with NO warning.Shut down your protection software now to avoid potential conflicts.Temporarily disable your antivirus and any antispyware real time protection before performing a scan.Click this link to see a list of sec... Read more

5 more replies
Relevance 44.69%

Hi friends

few days i get a problem my windows 7.when i open new tab stop working my keybord. then splited the tab it's working . all browsers .

any help please.

thank you

More replies
Relevance 44.69%

I have recently purchased a new HP 500 – 590 running windows 7 Pro with 8 gigs of RAM. I have McAfee livesafe antivirus and I believe Windows defender is also running. The computer and programs have all the latest updates. If I'm at my desk working on the computer for 3 or 4 hours or so my Internet browsers will stop accessing the Internet. I will have various programs open such as Pandora and Dragon NaturallySpeaking as well as IE 11 and Chrome and other third-party software that I use for by job. At some point the Internet browsers will stop accessing the internet and whatever websites they are currently on. I have shut down McAfee, rebooted my cable router, and closed whatever other programs will be currently running but  still cannot access the Internet with the browsers. I know the computer still has access the Internet as Pandora can still play and the Internet icon on the taskbar is clear. The only fix I've been able to come up with is to reboot the computer. Does anyone have any other ideas on what could be blocking browsers access? Thank you.

Answer:Internet browsers (IE 11 and Chrome) will just stop working

When this happens, open a command prompt (hold down the windows button + R, then type CMD and press Enter) and type the following command:
 
ping google.com
 
when the command is finished, right click in the black window and choose Mark, then highlight the entire window and Right-click once.  This will copy the results to your clipboard.  When you're done with that, run this command:
 
ping 8.8.8.8
 
I'll need to see both results.  Cheers.

5 more replies
Relevance 44.69%

Every time I want to read the online newspaper, everything is slowed down because the site wants to run videos. There used to be a way to turn off plug ins in Chrome but not anymore. Does anyone know a solution?

More replies
Relevance 44.69%

Could you guys help me out on how can I restore Chrome extension, please!
I have hatched image snap shoot.
Thank you very much

More replies