Computer Support Forum

BSOD | KMODE_EXCEPTION_NOT_HANDLED | ntoskrnl.exe+7cd40 | 0x0000001E

Question: BSOD | KMODE_EXCEPTION_NOT_HANDLED | ntoskrnl.exe+7cd40 | 0x0000001E

I've been getting the same BSOD for the past couple of days.

Things I've already done (to no avail):
Ran memtest 4.20 overnight - NO ERRORS
Replaced avast antivirus with Microsoft security essentials
Ran a quick scan with MSE - NO PROBLEMS
Updated ATI drivers to latest Catalyst 12.3
My specs are the following:
Custom built PC, less than 2 months old
Motherboard: Gigabyte 880GM-UD2H
Windows 7 Ultimate x64 SP1 OEM
Any help would be greatly appreciated. This is driving me crazy.
BSOD dumps attached.

Relevance 100%
Preferred Solution: BSOD | KMODE_EXCEPTION_NOT_HANDLED | ntoskrnl.exe+7cd40 | 0x0000001E

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: BSOD | KMODE_EXCEPTION_NOT_HANDLED | ntoskrnl.exe+7cd40 | 0x0000001E

Since your ram appears to be ok I would start with driver verifier.
These crashes were caused by memory corruption/exception (Cx05) probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

1 more replies
Relevance 80.91%

Hi!

Since I've upgraded my PC with a new motherboard, CPU, a second Nvidia GTX 580 graphics card (to make it SLI) and a cooler system for the CPU, I've been having random BSOD crashes.

I reinstalled my OS after changing the hardware, and since then I've been having these BSOD.

The BSOD refers the cause to a driver named ntoskrnl.exe.
I've included the DMP files and a system health report on this message.

You can find my system spec on my profile.

Thank you for your help guys!

Answer:Random BSOD, error 0x0000001e KMODE_EXCEPTION_NOT_HANDLED ntoskrnl.exe

  
Quote: Originally Posted by riotpowder


Hi!

Since I've upgraded my PC with a new motherboard, CPU, a second Nvidia GTX 580 graphics card (to make it SLI) and a cooler system for the CPU, I've been having random BSOD crashes.

I reinstalled my OS after changing the hardware, and since then I've been having these BSOD.

The BSOD refers the cause to a driver named ntoskrnl.exe.
I've included the DMP files and a system health report on this message.

You can find my system spec on my profile.

Thank you for your help guys!


These were caused by a memory exception. Please run these two tests to verify your memory and find which driver is causing the problem.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair di... Read more

2 more replies
Relevance 102.5%

Hello, i have this Bsod (KMODE_EXCEPTION_NOT_HANDLED ntoskrnl.exe 0x0000001e) since i bought Radeon 6950 flashed it to 6970 and overlocked PC
So, i teted my CPU in OCCT for hours and everything was perfect, i tested my videocard in 3Dmarks and other tests and again everything is perfect!
when i play League of Legends i have game crash several times and then this bsod!
it freaking me out.. everytime when i play LoL i have such problems...
Catalyst is the latest one -11.4 Beta (i tried to install 11.2 the same problem)
I have win 7 x64
please help!
minidump attached

Answer:KMODE_EXCEPTION_NOT_HANDLED ntoskrnl.exe 0x0000001e

  
Quote: Originally Posted by VaultDweller


Hello, i have this Bsod (KMODE_EXCEPTION_NOT_HANDLED ntoskrnl.exe 0x0000001e) since i bought Radeon 6950 flashed it to 6970 and overlocked PC
So, i teted my CPU in OCCT for hours and everything was perfect, i tested my videocard in 3Dmarks and other tests and again everything is perfect!
when i play League of Legends i have game crash several times and then this bsod!
it freaking me out.. everytime when i play LoL i have such problems...
Catalyst is the latest one -11.4 Beta (i tried to install 11.2 the same problem)
I have win 7 x64
please help!
minidump attached



This single crash was caused by the directx portion of your video driver. I would re-install the newest (non beta) version as indicated.

I would also suggest you back off the overclocking to test for often it is the cause.

When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper

When it is removed then download and install the fresh copy. I would just install the driver not the whole ccc as the extra's are often the cause of video problems.

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\031211-16255-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*... Read more

9 more replies
Relevance 97.58%

Hello guys,

im having some crashes with my computer.

-windows7 x64
-retail
-os age is 1 0r 2 months
-hardware age is 1 or 2 months

OS Windows 7 Ultimate 64bit
CPU Intel(R) Core(TM) i7-2600K CPU @3.4GHZ
Motherboard Asus Sabertooth p67
Memory GeIL 16 GB DDR3-1333 Quad-Kit
Graphics Card(s) ASUS ENGTX580
Sound Card onboard
Monitor(s) Displays asus
Screen Resolution N/A
Hard Drives Intel SSD 120gb,wd 750gb
PSU Cooler Master GX650

ive already ran memtest86 for 4 hours which gave no errors so dont think its a hardware problem.
And also ran the driver verifier with caused the last 3-4 BSOD but i cant seem to understand what is causing it to blue screen.

Also i am running Eset smart security 5 dont know if thats a problem or not.

and will attach the Dump files below.

i hope you guys can help me.
Oh and i also forgot to mention that i ran a sfc/scannow on my pc and all files are OK
My pc is in dutch sorry for that

Answer:BSOD While Idle or playing, ntoskrnl.exe+7cd40

Problem Devices:
Code:
WD SES Device USB Device USBSTOR \ OTHER & VEN_WD & PROD_SES_DEVICE & REV_2018 \ 574341563537373538373839 & 2 The drivers for this device are not installed.

Security Software (just to check that you have it and it is working properly; nothing needs to be done at this time):
Code:
egui.exe c:\program files\eset\eset smart security\egui.exe 1840 8 200 1380 4-4-2012 20:18 5.0.94.0 3,85 MB (4.035.152 bytes) 22-9-2011 13:03
ekrn.exe c:\program files\eset\eset smart security\x86\ekrn.exe 1936 8 200 1380 4-4-2012 20:18 5.0.94.0 952,09 kB (974.944 bytes) 22-9-2011 13:03


Code:
Loading Dump File [D:\Kingston\BSODDmpFiles\Woopiej\Windows_NT6_BSOD_jcgriff2\040412-13696-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Machine Name:
Kernel base = 0xfffff800`0300c000 PsLoadedModuleList = 0xfffff800`03250650
Debug session time: Wed Apr 4 11:48:12.335 2012 (UTC - 6:00)
System Uptime: 0 days 0:00:16.288
Loading Kernel Symbols
...............................................................
................................................................
..........................
Loading User Symbols
Loading unloaded module list
...... Read more

9 more replies
Relevance 90.61%

My sister has been getting a bunch of BSOD all the time I have attached the mini dump.

Answer:BSOD KMODE_EXCEPTION_NOT_HANDLED 0x0000001e

Hello There!

Remove:

Code:
Start Menu\Programs\AVG Family Safety Public:Start Menu\Programs\AVG Family Safety Public
Start Menu\Programs\Trend Micro Titanium Internet Security SMH-PC\SMH:Start Menu\Programs\Trend Micro Titanium Internet Security SMH-PC\SMH
Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately:Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase
Help protect your PC with Microsoft Security Essentials
Malwarebytes Free


   Note
Do not start the trial version of MalwareBytes


You may also take a look at: Good & Free System Security Combination

Virus Check:

Make scans with these tools below:TDSSKiller Rootkit Removal Utility Free Download | Kaspersky Lab US
Online Virus Scanner Eset
Application conflict:

Reduce the start-up items. This will help avoid software conflicts:Remove Startup Programs in Windows 7
Clean Startup in Windows 7
Please run these tests and report back the results.

1. SFC /scannow to check windows for corruption - SFC /SCANNOW - System File Checker
2. Disk check for errors on the hard drive - Run Disk Check in Windows 7
3. Troubleshoot apps by a clean boot - Performing a Clean Startup
4. Memtest86+ paying attention to part 3 - RAM - Test with Memtest86+
5. Hard drive test from HDD mfg website - Hard Drive Diagnostic Procedure

3 more replies
Relevance 89.79%

Hi,

I'm running on a clean install of windows 10 64 bit. I installed each day several programs without any problems. Everything seems ok, but tonight I had a BSOD. Can someone analyse the attached dump please

grz

Jacky Deschepper

Answer:intelppm.sys causes BSOD KMODE_EXCEPTION_NOT_HANDLED 0x0000001e

Hi Jacky De,

Welcome to the 10forums.

The intelppm.sys is a driver for your intel processor.
Please check here for driver update compatible with windows 10.

15 more replies
Relevance 89.79%

this happens at random times could be 3x a day or nothing for a few days iv attached the desktop pc zip file

if i need to give any more info just ask
im in no way a pc geek i just use it for games so i will prob need a walk through like a 4 year old to get this fixed

thanks in advance

Answer:BSOD error 0x0000001e KMODE_EXCEPTION_NOT_HANDLED

added files

9 more replies
Relevance 89.79%

Sirs,

This has just started to occur these past few weeks, there seems to be no real pattern of events, the crash occurs when I've been using any number of my applications... I have tried searching around on-line for various help/tips, but nothing I've tried so far has resolved the issue. If you are able to analise the attached data & offer any suggestions, it would be most appreciated...

Many thanks in advance...

More replies
Relevance 89.79%

Sirs,

This has just started to occur these past few weeks, there seems to be no real pattern of events, the crash occurs when I've been using any number of my applications... I have tried searching around on-line for various help/tips, but nothing I've tried so far has resolved the issue. If you are able to analise the attached data & offer any suggestions, it would be most appreciated...

Many thanks in advance...

Answer:BSOD KMODE_EXCEPTION_NOT_HANDLED NETIO.sys 0x0000001e

All 3 dumps indicate a problem with avgfwd6a.sys.

Code:
ffffb581`9bc439a8 fffff809`b4bf235f*** WARNING: Unable to verify timestamp for avgfwd6a.sys
*** ERROR: Module load completed but symbols could not be loaded for avgfwd6a.sys
avgfwd6a+0x235f

This belongs to AVG Antivirus. Uninstall it and run with the built-in Windows Defender and Firewall for awhile, see if that resolves the problem.

4 more replies
Relevance 88.56%

Hello everyone,
 
I have a similar problem to this one but I can not understand how to solve it.
 
My computer crash only when I play with random times, I can play for several hours without problem, or conversely, have a bsod every 20 minutes.
 
Could you help me please ?

==================================================
Dump File : 033014-19063-01.dmp
Crash Time : 30/03/2014 23:04:42
Bug Check String : KMODE_EXCEPTION_NOT_HANDLED
Bug Check Code : 0x0000001e
Parameter 1 : 00000000`00000000
Parameter 2 : 00000000`00000000
Parameter 3 : 00000000`00000000
Parameter 4 : 00000000`00000000
Caused By Driver : tcpip.sys
Caused By Address : tcpip.sys+3d5aa
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+75b90
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\033014-19063-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 7601
Dump File Size : 293 504
Dump File Time : 30/03/2014 23:06:17
==================================================

==================================================
Dump File : 033014-4617-01.dmp
Crash Time : 30/03/2014 22:29:53
Bug Check String : KMODE_EXCEPTION_NOT_HANDLED
Bug Check Code : 0x0000001e
Parameter 1 : 00000000`00000000
Parameter 2 : 00000000`00000000
Parameter 3 ... Read more

Answer:Bsod problem (KMODE_EXCEPTION_NOT_HANDLED 0x0000001e tcpip.sys)

Hi,
 
Please navigate to the folder C:\Windows\Minidump.  Select all the files in the folder, then right-click, go down to Send to and in the list that opens select Compressed (zipped) folder.
Attach the file that is created to your reply - More Reply Options > Choose files ....
 

8 more replies
Relevance 87.74%

Hello, after i upgraded from windows 7 to windows 10, i am getting those random BSOD screens. First i thought it was my usb wifi adapter, cause it was supported only for win 7 , but after upgrade i am still getting those BSOD errors. Can anyone help me where is the problem ? There are dump files, just bother with the last one from 7.8.2015 - that is the new after USB wifi adapter changed.

Answer:BSOD random crash KMODE_EXCEPTION_NOT_HANDLED 0x0000001e intelppm.sys

Chaoz64, I have looked at your last few dump files and they all are pretty consistent.

[CODE][
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff800ad072140, 0, ffffffffffffffff}
Probably caused by : intelppm.sys ( intelppm!AcpiCStateIdleCancel+0 )
Followup: MachineOwner/CODE]

They further name 2 drivers


Code:
ffffd001`69069990 fffff800`ae6ef7e4Unable to load image \SystemRoot\System32\drivers\netr28ux.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for netr28ux.sys
*** ERROR: Module load completed but symbols could not be loaded for netr28ux.sys
netr28ux+0x3f7e4

Which is your Ralink RT2870 series USB802.11n Wireless Adapter Driver (you may have a different manufacturer) , snd


Code:
ffffd001`0c469958 fffff800`46654ebbUnable to load image \SystemRoot\system32\DRIVERS\netr7364.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for netr7364.sys
*** ERROR: Module load completed but symbols could not be loaded for netr7364.sys
netr7364+0x64ebb

Which is your Ralink RT2870 series USB802.11n Wireless Ada... Read more

1 more replies
Relevance 82.41%

Hey guys, i recently have received a BSOD that says "KMODE_EXCEPTION_NOT_HANDLED" wich seems to be caused by ntoskrnl.exe . I am going to attach a .txt file that i got from Bluescreenviewer. Thanks for the help in advance (if you need any more info, dont hesitate to tell me )

Answer:WIN 8.1 BSOD, KMODE_EXCEPTION_NOT_HANDLED ntoskrnl.exe

Hi everyone, so i now also get a second BSOD after having had my first one (from time to time they change how they like it). This one is about a BAD_POOL_HEADER and is caused by spvve.sys. I will also for this one attach a .txt file with the Bluescreenviewer details. Thanks in advance.

14 more replies
Relevance 82.41%

Hi,
This Laptop is brand new, and i'm getting this random BSOD, i really tried everything that i can think of.
I did a factory reset, still after a day of use the are BSOD back.
I did some research online and some sites said it might be a RAM issue so i ran memtest86 and the result was 0 errors.

it happen a few times, i dont have the old records(before the factory reset, and before update), i have 2 dump files that happen today.(one of them happen while generating the SysnativeFileCollectionApp file.)

please help me figure this out.

? Windows 10
? x64
? What was the original installed OS on the system? Windwos 10
? OEM version (came pre-installed on system)
? Approximate age of system (hardware) 4 months
? Approximate age of OS installation (if you know) few days
? Have you re-installed the OS? no

? CPU i7 7700HQ
? Video Card GTX 1050


? System Manufacturer Dell
? Exact model number (if laptop, check label on bottom) XPS 15 9560
Laptop.


THANKS!!!

Answer:BSOD - KMODE_EXCEPTION_NOT_HANDLED - ntoskrnl.exe

My best advise is to return it. Anything we advise might void the warranty.

1 more replies
Relevance 81.59%

Hey, it's been happening for a while now, whenever I play a recent game, like NBA 2K12 or Dirt 3, I'll get random BSOD's it's very annoying, the sound will start skipping and it will BSOD.

KMODE_EXCEPTION_NOT_HANDLED 0x0000001e ntoskrnl.exe+70010

I attached the minidump.

Answer:BSOD while gaming, KMODE_EXCEPTION_NOT_HANDLED ntoskrnl.exe

Hello there!

Seems like the crash is caused by your gaming controller CM2793.sys possibly Snakebyte FFXIV game controller. Please remove the driver and reinstall it.


Code:
CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x1E

PROCESS_NAME: nba2k12.exe

CURRENT_IRQL: 2

TAG_NOT_DEFINED_c000000f: FFFFF88002F22FB0

EXCEPTION_RECORD: fffff88002f22958 -- (.exr 0xfffff88002f22958)
ExceptionAddress: fffff8800804b783 (CM2793+0x0000000000000783)
ExceptionCode: c0000094 (Integer divide-by-zero)
ExceptionFlags: 00000000
NumberParameters: 0

TRAP_FRAME: fffff88002f22a00 -- (.trap 0xfffff88002f22a00)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000002008 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8800804b783 rsp=fffff88002f22b98 rbp=fffffa80059d98f0
r8=00000000000000ad r9=fffffa8005a3bb7a r10=0000000000000000
r11=0000000000000005 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
CM2793+0x783:
fffff880`0804b783 ?? ???
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80002c80d6e to fffff80002c89010

STACK_TEXT:
fffff880`02f21a48 fffff800`02c80d6e : fffffa80`04b5d1a0 fffff880`0147aa39 fffff880`02f221c0 fffff800`02cb59a8 : nt!KeBugCheck
fffff880`02f21a50 fffff800`02cae75d : fffff800`02e96b1c fffff800`02dcfac... Read more

3 more replies
Relevance 81.59%

Hello , I recently upgraded from my AMD 270X to the AMD RX580 OC Armor (MSI)
And from this point onward i keep getting these random reboots/crashes but they only accur while i am gaming (not all games cause this)
I can only reproduce the reboot/dump by playing Playerunknown's Battlegrounds , The part where it asks you to jump of the plane it jumps... 5 secs later pc reboot.
I have been trying so many things to resolve this issue so i will post my dump files here in the hope anybody can tell me what actuall driver/hardware is acting up here.
(it is odd because i sometimes can play say ARK on epic for 3 days NP and sometimes it crashes my pc within 30 minutes)

I ran 3Dmark (fine no errors)
And CatZilla (crash with reboot at 4th test and first try RED screen at 3th test)
Leading me to think it is the video card..

Please help guys im completely lost (i tried reinstalling drivers cleanly , even reseated my ram and GPU no results all the same)

Answer:BSOD KMODE_EXCEPTION_NOT_HANDLED ( ntoskrnl.exe , ntkrnlmp.exe)

Hi there,

It seems if theres an Problem with you AMD GPU:

Code:
Card name: Radeon RX 580 Series

The crash dump analysis reveals not much info, except a clue in the stack:


Code:
0x0000001E: KMODE_EXCEPTION_NOT_HANDLED (20.07.2017 01:15:50) [Windows 10]

CAUSED BY: memory_corruption

PROCESS: ALLBenchmark.exe

Usual causes: Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS

ffffe380`3d3dcec8 fffff806`a54693a8 dxgmms2!VidSchiUpdatePriorityTables+0x78
ffffe380`3d3dcf28 fffffddd`094ab810 win32kbase!gDxgkWin32kEngInterface
ffffe380`3d3dcf98 fffff806`a54c2785 dxgmms2!VidSchSubmitCommand+0x2c5


dxgmms2 could indicate a problem with the GPU driver or the graphics card itself.

There are error messages in eventlog too which show an GPU problem:


Code:
2017-07-18 20:38:18 Warning: Display driver amdkmdap stopped responding and has successfully recovered.
2017-07-18 20:38:21 Warning: Display driver amdkmdap stopped responding and has successfully recovered.


Theres the tool AMD Overdrive installed.

2 more replies
Relevance 80.36%

I've been having BSODs ever since I did a system upgrade a few months back. I made the following upgrades:
- added 2 sticks of new RAM (Corsair xms3 8gb kit)
- added a new SSD (Intel SSDSC2BW180A3L)
- I also cloned my OS from my old drive to the SSD, don't know if that would cause problems
- overclocked my cpu to 3.2ghz from 2.67 (core i5-750)

The minidump files are attached. Grateful for any help! Thanks.

Answer:BSOD related to KMODE_EXCEPTION_NOT_HANDLED caused by ntoskrnl.exe

Scan the system for possible virus infection with these tools. It is needed.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Logitech SetPoint HID Filter Driver ia causing some problems here:

Code:
fffff880`02ffca78 fffff880`024bd595Unable to load image LHidFilt.Sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for LHidFilt.Sys
*** ERROR: Module load completed but symbols could not be loaded for LHidFilt.Sys
LHidFilt+0xc595
And the driver is very old.

Code:
fffff880`024b1000 fffff880`024c7000 LHidFilt T (no symbols)
Loaded symbol image file: LHidFilt.Sys
Image path: LHidFilt.Sys
Image name: LHidFilt.Sys
Timestamp: Fri Sep 02 11:53:09 2011 (4E60764D)
CheckSum: 0001071C
ImageSize: 00016000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Logitech - Support & Software Downloads

You are highly overclocked. No wonder that the graphics will crash, despite of having the latest driver.

Code:
CPUID: "Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz"
MaxSpeed: 2670
CurrentSpeed: 3202
As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings. Also set the BIOS to default, too.
How To Clear CMOS (Reset BIOS)

Also, your BIOS is very old.

Code:
BiosVersion = 080016
BiosReleaseDate = 09/09/2009
If possible, try to update it from EVGA Download ... Read more

2 more replies
Relevance 80.36%

Hello,
 
As this my first post, i'd like to salute all the members of bleepingcomputer wonderful community.
 
So, my problem is that i randomly got a BSOD (KMODE_EXCEPTION_NOT_HANDLED 0x0000001e) caused by driver tcpip.sys with ntoskrnl.exe+71ed0 crash adress according to bluescreenview.
 
 
My specs are:
Operating System: Windows 7 Ultimate on 64bit
 
Specs: Laptop: TOSHIBA Satellite S50-A with an i5 - 3230m CPU, 4 GB of RAM, nVidia Geforce 740m with 2 GB VRAM (Bought in september 2013)
 
BIOS: Insyde Corp. 1.20, 15/05/2013
 
Ran sfc /scannow, chkdsk /r , and memtest86(4 loops) tests which ended with no errors.
 
I will attach speccy link and the last 5 entries from blue screen view log.
 
 
http://speccy.piriform.com/results/zNHMCApUxpSIJqeQs7k4XtW
 
Blue screen view logs.
 
==================================================
Dump File         : 080614-21777-01.dmp
Crash Time        : 06/08/2014 21:27:35
Bug Check String  : KMODE_EXCEPTION_NOT_HANDLED
Bug Check Code    : 0x0000001e
Parameter 1       : 00000000`00000000
Parameter 2       : 00000000`00000000
Parameter 3       : 00000000`00000000
Parameter 4       : 00000000`00000000
Caused By Driver  : tcpip.sys
Caused By Address : tcpip.sys+71f60
File Description  : TCP/IP Driver
Product Name      : Microsoft® Windows&... Read more

Answer:Random BSOD - KMODE_EXCEPTION_NOT_HANDLED (ntoskrnl.exe, tcpip.sys)

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis

3 more replies
Relevance 78.72%

Is Windows 7 . . .
- x86 (32-bit) or x64 ? 64bit
- the original installed OS on the system? Yes
- an OEM or full retail version? OEM
- OEM = came pre-installed on system
- Full Retail = you purchased it from retailer

- What is the age of system (hardware)? 5 months
- What is the age of OS installation (have you re-installed the OS?) 5 months, came factory

I've been researching my BSOD issues and most of the fixes lead back to posts on this site so I figured I would register and hope for some help of my own.

I've got several BSOD's in the last two days, most refernece the NTOSKRNL.exe and a few times I've seen RT64win7.sys and AFD.sys.

I've attached the BSOD Dump & System File Collection info but the System Health Report kept kicking back an error so I dont have that info. I hope this is enough, thanks in advance for any help.

Answer:BSOD, 0x0000001E, ntoskrnl.exe

Hi and welcome to Seven Forums!

You have SpywareBlaster and Malwarebytes installed on your PC but no real time protection. Please install Microsoft Security Essentials and scan your PC.

-------------------------

Some crashes blame DirectX and/or your graphics card. As DirectX is built into windows, it can indicate file corruption. It could also mean you have graphics card issues.
Please run the sfc /scannow checker to check and repair important system files. Follow option two in this tutorial: SFC /SCANNOW Command - System File Checker. If it reports that Windows Resource Protection did not find any integrity violations, tell me. If it attempts to repair files, attach the CBS.log file to your next post. It is located here C:\Windows\Logs\CBS\CBS.log.
Then, follow the steps for Diagnosing basic problems with DirectX. If that proves unsuccessful and doesn't solve the BSOD's, then try to reinstall your graphics card drivers by following these steps.
Download the drivers you want for your display card(s)
Click Start Menu
Click Control Panel
Click Uninstall a program

For NVIDIA:
Uninstall the NVIDIA Graphics Driver (this should uninstall all NVIDIA software and drivers)
Restart your computer
Make sure NVIDIA 3D Vision Driver, NVIDIA 3D Vision Video Player, NVIDIA HD Audio Driver, and NVIDIA PhysX System Software are not still listed under Uninstall a program through Control Panel
If any remain of the above, uninstall one at a time
If asked to restart after uninstalling any... Read more

9 more replies
Relevance 78.72%

Hey,

I need help with this, any help will help.
Thanks,

Answer:BSOD ntoskrnl.exe 0x0000001e

Code:
BugCheck 1E, {ffffffffc0000005, fffff800032b0e45, 0, ffffffffffffffff}

Probably caused by : ntkrnlmp.exe ( nt!KeStackAttachProcess+115 )

Code:
Usual causes: Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS
The kernel has detected an illegal processor instruction, which couldn't be handled by the exception handler since no routines for the error exist.


Code:
0: kd> !error ffffffffc0000005
Error code: (NTSTATUS) 0xc0000005 (3221225477) - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
There seems to be some memory access violations, this is usually due to poorly written drivers referencing invalid addresses.

>>Upload MSINFO32<<Start
Type: msinfo32
File, Save
Place file in a zipped folder
Upload in next post using - Screenshots and Files - Upload and Post in Seven Forums
This file will show which programs you have installed, to see what drivers may be potentially causing issues.

9 more replies
Relevance 78.72%

Specs:
- Windows 7 Home Premium x64
- Original and only OS ever on the system
- Came pre-installed
- The entire system is about 2 months old
- The install is 2 months old.
- No other security system besides Microsoft Security Essentials

I'm getting a BSOD caused by the ntoskrnl.exe driver. Can't find any solutions. Could you guys help?

STOP error code is 0x0000001E.

Everything you need in the ZIP file.

(Note: It's not called minidump.zip because I have more than just the minidump in the zip file. I also have a dxdiag and some html files in there. All thing in there are relevant and helpful though.)

Answer:ntoskrnl.exe 0x0000001E BSOD

Code:
Loading Dump File [C:\Users\Mike\Downloads\BSODDmpFiles\justinbronze\Windows_NT6_BSOD_jcgriff2\122711-31044-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\users\mike\documents\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`02c49000 PsLoadedModuleList = 0xfffff800`02e8e670
Debug session time: Tue Dec 27 08:40:25.115 2011 (UTC - 7:00)
System Uptime: 0 days 0:02:33.644
Loading Kernel Symbols
...............................................................
................................................................
........................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000005, fffff8800287afb0, 0, 0}

Probably caused by : CLASSPNP.SYS ( CLASSPNP!ServiceTransferReq... Read more

9 more replies
Relevance 77.9%

Hello all! I'm a newcomer here looking for some help. I just started receiving the BSOD this weekend on my desktop. It has been working flawlessly since last summer. I only made a couple of changes this weekend.

1. I installed 3dMark11
2. changed video cables and monitors to connect a laptop dock with dual monitors.

I have since:
uninstalled 3dMark,
reconnected the monitors,
uninstalled, installed and then upgraded the Intel Rapid Storage drivers/software,
uninstalled and reinstalled Paragon recovery(due to another error that I thought pointed to it),
done a system restore,
checked as many of the drivers to make sure they are as up to date as possible.

From reading other threads, I believe the following is what is needed to help. I appreciate any help that you can provide.

http://dl.dropbox.com/u/3699279/jtodd12.zip

http://dl.dropbox.com/u/3699279/022713-17565-01.dmp

Answer:BSOD iaStoreA.sys and ntoskrnl.exe 0x0000001e

Code:
BugCheck 1E, {0, 0, 0, 0}

*** WARNING: Unable to verify timestamp for iaStorA.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys

Probably caused by : iaStorA.sys ( iaStorA+64024 )

Code:
Usual causes: Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS
Your Intel(R) C600 series chipset SATA AHCI Controller, seems to be causing some issues, have you tried using a a earlier version?


Code:
Driver c:\windows\system32\drivers\iastora.sys (3.6.0.1086, 564.46 KB (578,008 bytes), 2/27/2013 10:51 AM)
Update System Specifications:Speccy - System Information

9 more replies
Relevance 77.9%

Working on a Friends Computer who have been getting this error message with every boot into the OS, (although it boots into the Desktop, Win 7 Home, then BSOD)

Safe Mode works Fine, there seems to be no spyware/virus issues, and hardware checks outs

System is a DELL Inspiron 620s

Attached is the Dump file

Thanks in Advance for the Assist

Jose Torres

Answer:BSOD Stop: 0x0000001E on ntoskrnl.exe

Hi,


Code:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffffa80084e1610, 0, 7fffffa8000}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4987d )
Followup: MachineOwner
STOP 0x0000001E: KMODE_EXCEPTION_NOT_HANDLED
Usual causes: Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS

I would suggest removing Mcafee as it may be causing issues:
How to uninstall or reinstall supported McAfee products using the Consumer Products Removal tool (MCPR)

As an alternative, please download and install:

Microsoft Security Essentials.
Recommended from a strict BSOD perspective, compatibility & stability
compared to other antiviruses/internet security software.



   Note
Once downloaded, update and run a full system scan


Then check to see if your issue still exists?

What hardware have you tested?

cheers

Dave

1 more replies
Relevance 77.9%

Hello Forum,

I am hoping that someone will be able to help me with BSOD relating to ntoskrnl.exe - I think

I have looked up a similar thread and followed the advice but have not solved the problem. I have installed some maintenance software to try to clean up the computer cclean, Malwarebytes and Tune-up etc but still having the problem.

System is not overclocked

Any help would be greatly appreciated.

Answer:BSOD ntoskrnl.exe+75b90 0x0000001e

Welcome to the forum.


Code:
Start Menu\Programs\Utilities\Wise Registry Cleaner Free Public:Start Menu\Programs\Utilities\Wise Registry Cleaner Free Public
Start Menu\Programs\Utilities\TuneUp Utilities 2014 Unicron\Dean Costigan:Start Menu\Programs\Utilities\TuneUp Utilities 2014 Unicron\Dean Costigan
Start Menu\Programs\Utilities\TuneUp Utilities 2014\All functions Unicron\Dean Costigan:Start Menu\Programs\Utilities\TuneUp Utilities 2014\All functions Unicron\Dean Costigan





Quote:
The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evidence. If you feel the need to use a registry cleaning or optimisation software, most of us recommend the use of CCleaner - PC Optimization and Cleaning - Free Download but make sure you back up the registry before making letting ccleaner delete anything. 10 Tips on How to Properly Maintain Your Computer


Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Run Disk Check on your Hard Drive(s): Disk Check

Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDS... Read more

3 more replies
Relevance 76.26%

I had more bsd, but I think the 0x3b and 0xd1 are fixed. Any help would be appreciated. This is so frustrating. If its hardware related, I need help figuring out what. All my parts are new from newegg except for gpu and processor. I don't think its my ram because I swapped out different ram from my old pc and got same errors and that ram works flawless in other pc. Ran sfc scan now and chk disk and no errors. I am uploading the files you requested posted in instructions.

Answer:multiple bsod by ntoskrnl.exe, 0x0000000a, 0x0000001e, 0x00000050

The last 4 .dmp files point to a possible RAM problem. The only way to check that is to run a minimum of 8 consecutive passes of Memtest86+ as described here:

RAM - Test with Memtest86+

It is not sufficient to install the RAM into a different system as a test.

9 more replies
Relevance 75.85%

WTF IS THAT?! My computer just turns off without warning out of no were. I turned off that "automaticaly reboot after errors" or sumtin like that, but it still does it, i hear it has sumtin to do with either my hard drive or ram, i took them out and pluged in the one i normally use, and my ram hasnt changed at all. can anyone help?
 

Answer:0x0000001E, KMODE_EXCEPTION_NOT_HANDLED

I can run a debugging utility on the dump files if you do this:

1 > create a new folder on the desktop and call it "dumpcheck" or whatever you like
2 > navigate to %systemroot%\minidump and copy the last few minidump files to that folder.%systemroot% is normally c:\windows. They are numbered by date. You can paste that address in address bar to get there.
3 > close the folder and right click on it and select Send to Compressed (zipped) Folder.
4 > use the "manage attachments" in the "advanced" reply window to upload that zip file here as an attachment.

This might point us to a 3rd party driver causing the error, if one exists for it.

Since almost all bugchecks can be caused by faulty ram, I would recommend you perform memory tests.

Beginners Guides: Diagnosing Bad Memory
 

1 more replies
Relevance 75.44%

Hello,

I constantly have BSOD's... when i watch the movie (avi, mkv) in any player (GOM, MPC-HC, Splash Pro...) and when i browsing internet (Firefox, Opera, Chrome, IE9).

I reinstalled Windows twice, even buy PCI network adapter, still same problem...
Already ran Memtest (6 passes 0 errors) and few of this dump files are when i ran Driver Verifier.

And yes, this problem started when i installed Service Pack 1, i don't know is that relevant..

My specs:
Asrock A770DE+
4 GB DDR2 Kingmax
MSI GTX460 Hawk
AMD Phenom ll X4 B50
Windows 7 Ultimate x64 SP1
Microsoft Security Essentials

Everything is in attachment.
Any help on this issue would be much appreciated.

Thank you in advance!

Answer:Random BSOD's, error 0x0000001e, 0a, caused by ntoskrnl.exe+7cc40

  
Quote: Originally Posted by zvone07


Hello,

I constantly have BSOD's... when i watch the movie (avi, mkv) in any player (GOM, MPC-HC, Splash Pro...) and when i browsing internet (Firefox, Opera, Chrome, IE9).

I reinstalled Windows twice, even buy PCI network adapter, still same problem...
Already ran Memtest (6 passes 0 errors) and few of this dump files are when i ran Driver Verifier.

And yes, this problem started when i installed Service Pack 1, i don't know is that relevant..

My specs:
Asrock A770DE+
4 GB DDR2 Kingmax
MSI GTX460 Hawk
AMD Phenom ll X4 B50
Windows 7 Ultimate x64 SP1
Microsoft Security Essentials

Everything is in attachment.
Any help on this issue would be much appreciated.

Thank you in advance!


8 different causes most pointing to hardware. If you are overclocking stop.

Please run these two tests to verify your memory and find which driver is causing the problem.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make s... Read more

9 more replies
Relevance 75.44%

Hi i keep getting frequent blue screens whilst playing league of legends. I have downloaded blue screen viewer and tried to identify the issue as much as possible however i don't know how to fix it. I have attached all of the minidump files found within the folder.

Answer:BSOD playing League of Legends 0x0000001e dxgmms1.sys and ntoskrnl.exe

I have attached the file requested for you.

6 more replies
Relevance 75.03%

Hello Everyone,

I recently purchased an Asus G53SX Notebook, and I keep getting BSOD's at least daily. Some of them refer to ndis.sys, nvlddmkm.sys, ntoskrnl.exe, tcpip.sys and Ntfs.sys. I suspect it might be some RAM modules that the store owners added to the laptop before I purchased it. So far, I upgraded the BIOS to the latest version, upgraded the graphics card drivers, checked memory for errors with the Windows utility (No errors). Most of them are KMODE_EXCEPTION_NOT_HANDLED. Please help me and let me know if you need more info.

System Specs:

ASUSTeK Computer Inc. G53SX
Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz
BIOS Date: 12/20/11 09:47:09 Ver: 04.06.03
Total Memory: 16,00 GB PC3-10700
NVIDIA GeForce GTX 560M

Answer:Random 0x0000001e KMODE_EXCEPTION_NOT_HANDLED

  
Quote: Originally Posted by pabvr81


Hello Everyone,

I recently purchased an Asus G53SX Notebook, and I keep getting BSOD's at least daily. Some of them refer to ndis.sys, nvlddmkm.sys, ntoskrnl.exe, tcpip.sys and Ntfs.sys. I suspect it might be some RAM modules that the store owners added to the laptop before I purchased it. So far, I upgraded the BIOS to the latest version, upgraded the graphics card drivers, checked memory for errors with the Windows utility (No errors). Most of them are KMODE_EXCEPTION_NOT_HANDLED. Please help me and let me know if you need more info.

System Specs:

ASUSTeK Computer Inc. G53SX
Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz
BIOS Date: 12/20/11 09:47:09 Ver: 04.06.03
Total Memory: 16,00 GB PC3-10700
NVIDIA GeForce GTX 560M


These crashes were caused by memory corruption (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.
If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, tes... Read more

4 more replies
Relevance 74.21%

Hello.

This is the first time in two years time that I've received a BSOD. I woke up this morning, turned on my PC as usual, the OS reached the start-up picture (the one with a date and time on it), and it then spew the BSOD out on me.

1. Nothing is over-clocked. Everything is working on its default stock speeds (CPU, RAM, GPU).

2. I'm ruling out overheating cause the PC was less than a minute on till the BSOD appeared.

3. All of the possible OS updates have been installed via Windows Update. No changes in the OS's settings have been made in months as well.

4. All of the software I use (including drivers) is stable (not alpha, beta, so on...) and up-to-date. The OS is also an RTM release.

The only changes I've made in the past 7 days are as follows:

a) Uninstalled Opera 12.15 and installed its new version - v15. Highly doubt it has anything to do with this.

b) Reinstalled Daemon Tools LITE (+sptd v1.83). The version I had was 4.47.1-0333 and the disc-soft's main site had 4.47.1-0335.

c) Upgraded to a new graphics card - GTX780. The card, as stated above, is working on its default settings. Using the 320.49 WHQL drivers with it.

Bluescreen viewer gives out the following information: KMODE_EXCEPTION_NOT_HANDLED and 0x0000001e. It says the error was caused by the ACPI.sys driver at crash address ntoskrnl.exe+5a440.

Any help would be extremely appreciated.

Answer:KMODE_EXCEPTION_NOT_HANDLED Error Code 0x0000001e

ACPI.sys is related to power management. So, you just installed a new graphics card; yes? Can you current PSU handle the new power requirements? Specs say the minimum PSU recommendation is 600 watts for the GTX 780. Also, did you connect the 8 pin and 6 pin supplementary power connectors (information obtained from specs)?

11 more replies
Relevance 72.57%

Hey there, recently I downloaded sketchy winrar file with an .exe file in it to my laptop which I opened and that then proceded to open a bunch of dos prompt type windows, so I guess it was a virus. anyways after all that I got a blue screen of death with a STOP: 0x0000001E (0xC0000005, 0x00000000, 0x00000000, 0x00000000) KMODE_EXCEPTION_NOT_HANDLED error. When I tried to reboot I got the same thing again so it was pretty much a loop. Eventually I figured out that if I disconnected my network/internet cable I could boot up fine and run windows without any problems. I deleted all of the malicious files and ran a virus scan that showed nothing was wrong but Im pretty sure the virus did something to my registry because whenever I try to reconnect to the internet I get this same blue screen error.

Any help would be greatly appreciated. Thanks

oh I forgot to mention I am running windows 2000 professional
 

Answer:STOP: 0x0000001E KMODE_EXCEPTION_NOT_HANDLED error when connecting to internet

bryman1999 said:



Hey there, recently I downloaded sketchy winrar file with an .exe file in it to my laptop which I opened and that then proceded to open a bunch of dos prompt type windows, so I guess it was a virus. anyways after all that I got a blue screen of death with a STOP: 0x0000001E (0xC0000005, 0x00000000, 0x00000000, 0x00000000) KMODE_EXCEPTION_NOT_HANDLED error. When I tried to reboot I got the same thing again so it was pretty much a loop. Eventually I figured out that if I disconnected my network/internet cable I could boot up fine and run windows without any problems. I deleted all of the malicious files and ran a virus scan that showed nothing was wrong but Im pretty sure the virus did something to my registry because whenever I try to reconnect to the internet I get this same blue screen error.

Any help would be greatly appreciated. Thanks

oh I forgot to mention I am running windows 2000 professionalClick to expand...


Link: http://support.microsoft.com/kb/252935
 

3 more replies
Relevance 72.57%

Hey there, recently I downloaded sketchy winrar file with an .exe file in it to my laptop which I opened and that then proceded to open a bunch of dos prompt type windows, so I guess it was a virus. anyways after all that I got a blue screen of death with a STOP: 0x0000001E (0xC0000005, 0x00000000, 0x00000000, 0x00000000) KMODE_EXCEPTION_NOT_HANDLED error. When I tried to reboot I got the same thing again so it was pretty much a loop. Eventually I figured out that if I disconnected my network/internet cable I could boot up fine and run windows without any problems. I deleted all of the malicious files and ran a virus scan that showed nothing was wrong but Im pretty sure the virus did something to my registry because whenever I try to reconnect to the internet I get this same blue screen error. :cry

Any help would be greatly appreciated. Thanks
 

Answer:STOP: 0x0000001E KMODE_EXCEPTION_NOT_HANDLED error when connecting to internet

sorry, forgot to mention, I am running windows 2000 professional
 

2 more replies
Relevance 70.52%

Hi,

My issue is to do with accessing my PC via RDP, I have a work PC which I should be able to access via RDP (mstsc) however whenever I attempt RDP access to my work PC from another, my work PC blue screens reboots, and then allows me access once rebooted. It will still grant me RDP access for a short while but coming back to it the next day it will then blue screen again. This is not only happening to me but too a couple of people within our company.

I have tried allowing the port I use for port forwarding to access my PC through the firewall and I have tried installing all windows updates but nothing seems to have worked.

I know that my PC is blue screening because I have attempted RDP access in the same room.

Attached is the latest .dmp file.

Cheers for the help.

Answer:BSOD when using RDP error: "KMODE_EXCEPTION_NOT_HANDLED" ntoskrnl.exe

What is uploaded here is not a .dmp as you said, it is a .txt.

Post it following Blue Screen of Death (BSOD) Posting Instructions.

5 more replies
Relevance 67.24%

Hi i recently built a new PC and randomly it blue screens, mostly on start ups,
my PC is
asus 97-p
i3 4150
msi gtx 770
8gb crucial ram

I have followed instructions and attached my dmp file.
Someone please help me i feel like breaking this machine
Thanks Mark

More replies
Relevance 66.83%

MY PC crashes random with KMODE_EXCEPTION_NOT_HANDLED

PC:

i7-7700K
16 GB DDR4 3200 MHz
Gigabyte GTX 1070
Gigabyte Aorus Gaming K5

Answer:KMODE_EXCEPTION_NOT_HANDLED ntoskrnl.exe Windows 10

Hello Moda99

Welcome to TenForums!

All the BSOD dumps suggest memory corruption and this can be due to faulty RAM or a driver causing problems.

The only drivers I can find mentioned in any of the dumps are:


Code:
ffffd480`208eaa48 fffff80e`777974e0Unable to load image \SystemRoot\System32\drivers\e2xw10x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for e2xw10x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e2xw10x64.sys
e2xw10x64+0x74e0

ffffe501`8493eb78 fffff804`2590c090Unable to load image \SystemRoot\system32\DRIVERS\klif.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for klif.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys
klif+0x3c090

So three things to try in this order:

1. Uninstall Kaspersky to see if this stops the BSOD (klif.sys is a Kaspersky driver) and use Windows Defender while troubleshooting

2. Update the Killer Miniport driver e2xw10x64.sys if possible - it is currently dated Jan 2016 so there may not be a newer one.

3. Run Memtest86+

Diagnostic Test

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums


   Note


MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a ph... Read more

1 more replies
Relevance 66.83%

Hi Guys,

I am having recurring blue screens on my Vista Business x64 OS.

The machine has the following components:
- Intel Core2 Quad Q9550 @ 2.83 Ghz
- 8 GB of RAM
- ATI Radeon HD 2400 PRO

The problem seems to occure when debugging in Visual Studio 2008.
However, I can't say for sure this is the cause because I'm pretty much using VS all day long and the odds would have been slim that the crash occured when VS was off. However, that's what the minidump (see below) seems to indicate (VSProject2009 is the name of the project I was debugging).

Also, I have been using VS for years with different configurations and never had such problems. We also actually have a few other computers identical to this one (hardware + software images) and people using VS on them, and no one has reported any issues.

Now on to the minidump.

This is the message displayed by Vista:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.256.6
Locale ID: 3081

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80002AC750A
BCP3: 0000000000000000
BCP4: 00000000000000D8
OS Version: 6_0_6001
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\Mini070609-02.dmp
C:\Users\xavierp\AppData\Local\Temp\WER-84614-0.sysdata.xml
C:\Users\xavierp\AppData\Local\Temp\WER1850.tmp.version.txt

Read our privacy statement:
Microsoft Online Crash Analysis


Th... Read more

Answer:BlueScreen - KMODE_EXCEPTION_NOT_HANDLED in NTOSKRNL.EXE

Visual Studio was the process that was running when the crash occurred - but it doesn't blame it.

Here's the key statement:





Probably caused by : klif.sys ( klif+4756 )




This is your Kaspersky protection. You can either uninstall it and then reinstall it - or you can go with something else.

In the event that this is the Internet Security version, I must state that I do not recommend any Internet Security application due to the problems that I see with it.
When they break it's not usually this easy to pin the blame on them - and the errors that they cause are usually very difficult to troubleshoot.

2 more replies
Relevance 66.83%

Hi,

I'm having a 64 bit windows 7 laptop and i'm getting blue screen very frequently now and its saying:

check with your hardware vendor for any bios updates. Disable the memory option such as caching or shadowing.
technical information - stop-ox00000001E

while the crash dump file saying - its a problem with ntoskrnl.exe driver problem.

bug check code : 0x0000001e
parameter : ffffffff`c0000005, fffff800`034b11eb,00000000`00000000, 000007ff`fffa0000
crash address : ntoskrnl.exe+75b80

can you please help me resolve the problem.

I'm also attaching the crash dump files

Answer:KMODE_EXCEPTION_NOT_HANDLED due to ntoskrnl.exe driver

Welcome to the forum.

McAfee is a known cause of BSOD's. Please remove it.

Microsoft Security Essentials is recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes - Free
Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Reduce items at start-up. Nothing except anti-virus is required:Startup Programs - Change
Troubleshoot Application Conflicts by Performing a Clean Startup
Make scans with the following:

Kaspersky TDSSKillerAnti-rootkit utility TDSSKiller
ESET online scannerFree Online Virus Scanner | ESET
Perform a System File Check:Click on the
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker

Check for heating issues using Speccy or HWmonitorHWMonitor
Speccy
Upload a screen shot: Screenshots and Files - Upload and Post in Seven Forums

Bugcheck Summary:

Code:
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Debug session time: Sat Nov 23 19:39:14.746 2013 (UTC + 6:00)
System Uptime: 0 days 0:09:55.636
BugCheck 1E, {ffffffffc0000005, fffff80002b7693a, 1, 18}
Probably caused by : ntkrnlmp.exe ( nt!ObpCreateHandle+29a )
BUGCHECK_STR: 0x1E_c0000005_R
PROCESS_NAME: chrome.exe
????????????????????????????????????????... Read more

1 more replies
Relevance 66.83%

Hello,  I saw a topic similar to this one recently on this site, and I wasn't sure if the answers applied to my box.  Could you review my minidumps and other collection files?
 
Windows 10:  KMODE_EXCEPTION_NOT_HANDLED ntoskrnl.exe+14a510
The computer freezes when no one is using the computer, after about 15 minutes.  It does not actually display a blue screen or restart, but the display just freezes.
 
I have tried a lot of things.
sfc /scannow -  found a problem with networkexplorer.dll.  However, the DSIM command to repair could not find the source, even when I pointed it to the ISO.  I turned off network discovery and Wifi, and the issue still happens.
Chkdsk
Windows Memory Diagnostic
Looked to see if any drivers were installed recently, and didn't see anything.
I really have no idea what is wrong, and I'd really rather not reset Windows.   You've been so helpful to the other person who posted on this issue, and I thought you could help me out.  
 
The perfmon report didn't generate, but I attached the other file collection zip file.

Answer:KMODE_EXCEPTION_NOT_HANDLED ntoskrnl.exe+14a510

Your UEFI/BIOS (version 2.1.3) dates from 2016.  Please check at the manufacturer's website to see if there are any UEFI/BIOS updates available for your system.  This is just in case there has been a more recent update.FYI - W8 and W10 communicate more with the UEFI/BIOS than previous versions of Windows, so it's important to ensure that the UEFI/BIOS is kept up to date (and that outdated UEFI/BIOS' may be the cause of some compatibility issues).Although you appear to have a reasonable number of Windows Update hotfixes for this version of your OS, please double check for any new Windows Updates.  It only takes one update to cause a problem, so it's essential that you have all of them.  The actual number is not important.  Rather it's important that you checked manually, installed any available updates, and didn't experience any errors when checking or updating.The memory dumps all blame video, and all the errors are STOP 0x1E (more info on this error here:  http://www.carrona.org/bsodindx.html#0x0000001E )I would first suggest- download a fresh set of the latest nVidia drivers from the Dell support website for your system- uninstall the current nVidia drivers from Control Panel...Programs and Features- install the freshly downloaded drivers- monitor for further BSOD's If the BSOD's continue, please run these free hardware diagnostics:  http://www.carrona.org/hwdiag.htmlStart with the video tests, but please run ALL of the tests - and le... Read more

4 more replies
Relevance 66.83%

Hello,  I saw a topic similar to this one recently on this site, and I wasn't sure if the answers applied to my box.  Could you review my minidumps and other collection files?
 
Windows 10:  KMODE_EXCEPTION_NOT_HANDLED ntoskrnl.exe+14a510
The computer freezes when no one is using the computer, after about 15 minutes.  It does not actually display a blue screen or restart, but the display just freezes.
 
I have tried a lot of things.
sfc /scannow -  found a problem with networkexplorer.dll.  However, the DSIM command to repair could not find the source, even when I pointed it to the ISO.  I turned off network discovery and Wifi, and the issue still happens.
Chkdsk
Windows Memory Diagnostic
Looked to see if any drivers were installed recently, and didn't see anything.
I really have no idea what is wrong, and I'd really rather not reset Windows.   You've been so helpful to the other person who posted on this issue, and I thought you could help me out.  
 
The perfmon report didn't generate, but I attached the other file collection zip file.

More replies
Relevance 62.32%

Getting very intermittent stop errors,:0x0000001e(0xc0000005,0x080420108,0x0000000,0x00000517) kmode_exception not handled, Address 80420108 Base at 80400000, Date stamp 3d366b8-ntoskrnl.exe, any suggestions would be appreciated.Larry H

Answer:0x0000001e Stop error, ntoskrnl.exe

here is a cool trickput 0x0000001e into a web search engine and see where it takes you.You will get 65,800 hits of which the first 10 are relevent

4 more replies
Relevance 60.27%

This machine has a long history of crashing intermittently. I've historically told it's been related to graphics drivers, but I've uninstalled and reinstalled and wiped and started fresh with those dozens of times. I've also done the same thing with the network drivers, since the Killer/Qualcomm/Aetheros seem to be notorious for that.

I've run memtest and found nothing. I have not been able to reproduce the crash in any way, and it certainly doesn't seem related to stressing the system. If anything, the system's more likely to crash when it's cold and not doing anything.

I've attached what's been spit out of the DM log collector, a zip file of all the minidumps I see, along with a screenshot of what bluescreenoverview pulled from the dump files.

Any suggestions or advice gratefully appreciated.

Answer:Long history of crashes, typically 0x0000001e KMODEs ntoskrnl+

Something I forgot to mention - other people have fingered the wireless driver but that's also something I've installed/reinstalled repeatedly.

1 more replies
Relevance 55.35%

Hello,

I really need help...
I have Vista x64, and I have random crash with the code 1E. I checked msconfig to deactivate/remove entries which were not necessary but I can't say now if that worked or no... Maybe if I don't have any crash more until tonight, that would mean I managed to deactivate the failing component!

I put the debug log in attachment, made with DebugWiz.
It says that "ntkrnlmp.exe" would be responsible for that crash... Wow! System component...

The 2nd, 3rd and 4th parameters are strange : 0, 8 & 0!!
Does anyone have a suggestion?
Many thanks

Answer:BSoD - KMODE_EXCEPTION_NOT_HANDLED

NTKRNLMP.EXE is the on-disk image containing the OS kernel and Executive. It is very common for memory corruption issues to manifest themselves as crashes in the functions of that module. That doesn't necessarily mean the underlying fault is a bug in the kernel. In fact, it almost never means that

This minidump is not going to directly help you pinpoint the cause, but you could start bu updating the oldest drivers in that list. For example:

fffffa60`0357f000 fffffa60`0358d000 ElbyCDFL ElbyCDFL.sys Thu Dec 14 22:22:27 2006 (4581C093)
fffffa60`039fa000 fffffa60`039fd600 copperhd copperhd.sys Wed May 24 05:51:13 2006 (4473D831)

Some are relatively new but you might be able to do without them while you're troubleshooting:

fffffa60`00f32000 fffffa60`00fa1680 mfehidk mfehidk.sys Fri Sep 19 01:06:00 2008 (48D2DED8)
fffffa60`06363000 fffffa60`0636e500 VBoxUSBMon VBoxUSBMon.sys Mon Feb 16 18:26:18 2009 (4999A1BA)
fffffa60`0636f000 fffffa60`06391540 VBoxDrv VBoxDrv.sys Mon Feb 16 18:26:11 2009 (4999A1B3)

And so on... then you check the next dump - if there is one - to see the next crash pattern.

9 more replies
Relevance 55.35%

Hi,

I got this error twice this week. I was just doing regular work with Visual Studio, Chrome, Spotify, Dropbox, TotalCmd running. I checked MEMORY.DMP with WinDbg on the crash today and it shows chrome.exe as the process where the error happened but I guess it could be hardware error and nothing related to Chrome.

Answer:Bsod - kmode_exception_not_handled

You are required to remove all programs that have been illegal activated before any support may be provided.
Forum rules





4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).

5 more replies
Relevance 55.35%

So i was playing bf4 a few minutes ago and this bsod error popped up. this is the first time seeing this bsod while playing bf4 and ive had the game since launch. i took a screenshot of bluescreen viewer right here . if any more info is needed let me know.

here is the minidump: https://drive.google.com/file/d/0B0F...it?usp=sharing

my specs are
OS: Windows 7 home edition 64 bit
Motherboard:ASUS M5A99X EVO AM3
CPU: AMD fx 8350 (4.6ghz oc)
GPU: msi GTX 670 power edition and gtx 560 physx
RAM:2x4gb(8gb) CORSAIR Vengeance240-Pin DDR3 SDRAM
HDD: Western Digital Caviar Blue 500gb and 640gb
Bluray: LG Bluray Drive & Burner

Answer:KMODE_EXCEPTION_NOT_HANDLED bsod

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

1 more replies
Relevance 55.35%

Today I was playing left 4 dead 2 and suddenly got a BSOD with the following message: KMODE_EXCEPTION_NOT_HANDLED.
I immediately used dm_log_collector hoping it would help resolve the issue.
I had a previous BSOD long time ago but it was different and never had it again and for that they suggested to run memtest but I haven't had the time.
Also my PC used to reboot itself but it turned out it was an issue with my mains power (it is already fixed and it hasn't happened again).
edit: Could it be a RAM issue?

Answer:BSOD kmode_exception_not_handled

There are files missing from the zip file you uploaded. Please get the latest version of DM_Log_collector from here
Blue Screen of Death (BSOD) Posting Instructions
and upload that zip file.

Thanks

Edit: Also looks like this is one of the builds that there are no symbol files available for on the Microsoft server so I can't do anything with the dump.

7 more replies
Relevance 55.35%

Hi everyone,
This is my first post in this forum.
I have a problem with multiple BSODs on my computer.
I tried to solve the first couple of BSODs but with no luck at all.
I then decided to reinstall Windows 10 on my computer but the BSODs kept coming.

The first one was KMODE_EXCEPTION_NOT_HANDLED (nvlddmkm.sys). Unfortunately I don't have a dump file from this crash because i forgot to configure the dump file.

I tried to reinstall my Nvidia drivers using DDU and install the latest drivers from Nvidias site.
In blue screen viewer I can see that TCPIP.sys i also mentioned.

I have also tried to run sfc /scannow and there was some problems that couldn't be fixed.
I then used the dism tool to repair it with a windows image.

After this the computer work for a day or two and it blue screen again.
This time it said KERNEL_SECURITY_CHECK_FAILURE and i then watch in the "WhoCrashed" program and ut said the source was ntkrnlmp.exe.
On internet some people said that this was solved by removing Hyper-V switches.
So I decided to remove Hyper-V from my computer (Awful software).

It worked again for a day or two and then it crashed again with the message KMODE_EXCEPTION_NOT_HANDLED and the source was: tcpip.sys.
But blue screen viewer says the source is nvlddmkm.sys.

I'm really starting to think this is a hardware issue but I hope it's a bad driver.
I hope some i this forum can help me with this issue I've attached the Zip file as requested.

Thanks in advance and excuse me i... Read more

More replies
Relevance 55.35%

Hello, after upgrading to windows 10 from windows 8 I have been getting some weird BSOD crashes now and again, sometimes it?s days or weeks in between them and sometimes there are several on the same day.

The error message simply says "KMODE_EXCEPTION_NOT_HANDLED" without no further clues, I suspect a driver somewhere but haven?t been able to find where the problem stems from.
The crashes happen seemingly at random.

Thanks for your time

Attachment 62096

Answer:Kmode_exception_not_handled BSOD once or twice every other day

The dumpfiles are

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff8012eeed568, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt!KiIncrementConcurrencyCount+0 )
Followup: MachineOwner
-

The dumpfiles don't blame a specific driver.

Start updating the windows 10 drivers from the supportpage of your laptop http://www.acer.com/ac/en/GB/content/drivers

Also you have a outdated McAfee suite with drivers from 2014.
Please upgrade to a windows 10 compatible version.

5 more replies
Relevance 55.35%

Hi there forum. Decided it's time to start dealing with the Bsod's and lockups.
My bsod issues are admittedly not as bad as others, I get them quite rarely. I experience lockups more often and cannot justify what causes them.
The computer and hardware I use is about a year old. I have never over-clocked or re-installed OS, I don't run alot of heavy applications. Mainly just internet browsing, photoshop, illustrator, quite a bit of video games.. etcetc.

OS is Windows 7 Home Premium x64
Not sure if OEM or Full retail, a shop put the system together, but I have the install disk etc.

Thanks for your time.
Steez

Answer:Bsod KMODE_EXCEPTION_NOT_HANDLED

  
Quote: Originally Posted by Steez


Hi there forum. Decided it's time to start dealing with the Bsod's and lockups.
My bsod issues are admittedly not as bad as others, I get them quite rarely. I experience lockups more often and cannot justify what causes them.
The computer and hardware I use is about a year old. I have never over-clocked or re-installed OS, I don't run alot of heavy applications. Mainly just internet browsing, photoshop, illustrator, quite a bit of video games.. etcetc.

OS is Windows 7 Home Premium x64
Not sure if OEM or Full retail, a shop put the system together, but I have the install disk etc.

Thanks for your time.
Steez


Hi Steez welcome to SF

Please follow these steps in that order,

Download Avira cleaner from http://dlpro.antivir.com/down/window...cleaner_en.zip

Uninstall Avira,restart,use avira cleaner to clean any lefted fragments.

Download and install MSE http://www.microsoft.com/security/pc-security/mse.aspx

Uninstall all your Logitech software/drivers (as Logitech SetPoint) and update them with the most recent from Logitech

----------------------
Post back with ANY results.

7 more replies
Relevance 55.35%

Hey guys,

i have a lot of BSOD in the last time.

Story:
I already had windows 10 running on my old system - without any BSOD.

I upgraded some Hardware a while ago (mainboard, graphics and processor) and did a clean installation of Windows 10...
Since then i got at least 2 BSOD each day (Even while writing this thread).
I did another clean insatllation of Windows 10 a few days ago, because i thought it might could solve the problem (...).
But it didn't help anything. I still get the same amount of BSOD.

What i already tried:
- Clean installation of windows 10
- updated BIOS
- Updated all drivers
- Installed only driver (without MSI Gaming App or Killer Network Suite)
- sfc /scannow (no errors)
- memtest (no errors)

My current system:

Computer name: REDHEAD
Windows version: Windows 10 , 10.0, build: 10586
Windows dir: C:\Windows
Hardware: MS-7917, MSI, Z97 GAMING 5 (MS-7917)
CPU: GenuineIntel Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz Intel586, level: 6
8 logical processors, active mask: 255
RAM: 17125896192 bytes total
Mainboard:
MSI Z97 GAMING 5 Intel Z97 So.1150 Dual Channel DDR3 ATX Retail
Processor:
Intel i7 4790k
Graphics:
6144MB MSI GeForce GTX 980 Ti Gaming 6G
RAM:
G.Skill 16GB RAM 1866MHz
Power supply:
Thermaltake Smart SE 630W ATX 2.3
Storage:
1x HDD 1TB
1x Samsung 850 EVO 256GB
1x Samsung 840 PRO 256GB

The dmp files are attached.

I appreciate your help and hope we can solve this problem togther.
Best regards,
Marcel

Answer:BSOD - kmode_exception_not_handled

Hi muleee,

Welcome to the 10forums

Did you immediately started to install software after Windows was done installing?

I see many memory access violation crashes so for now I'll focus on the memory explicitly.
How many passes were completed with memtest? What memtest did you run?
Please revert back all overclocking on your system, whether you removed them in the past but resulted in nothing isn't relevant.
What is relevant is that overclocking can cause more problems on an unstable system, if not being the cause which is not what we need.

Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
The PSU, cooling and other stuff are NOT mentioned in the tool.How to fill in your system specs:

8 more replies
Relevance 55.35%

Today I was playing left 4 dead 2 and suddenly got a BSOD with the following message: KMODE_EXCEPTION_NOT_HANDLED.
I immediately used dm_log_collector hoping it would help resolve the issue.
I had a previous BSOD long time ago but it was different and never had it again and for that they suggested to run memtest but I haven't had the time.
Also my PC used to reboot itself but it turned out it was an issue with my mains power (it is already fixed and it hasn't happened again).
edit: Could it be a RAM issue?

More replies
Relevance 55.35%

Hi,

I got this error twice this week. I was just doing regular work with Visual Studio, Chrome, Spotify, Dropbox, TotalCmd running. I checked MEMORY.DMP with WinDbg on the crash today and it shows chrome.exe as the process where the error happened but I guess it could be hardware error and nothing related to Chrome.

Answer:Bsod - kmode_exception_not_handled

You are required to remove all programs that have been illegal activated before any support may be provided.
Forum rules





4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).

1 more replies
Relevance 55.35%

Hi everyone,
This is my first post in this forum.
I have a problem with multiple BSODs on my computer.
I tried to solve the first couple of BSODs but with no luck at all.
I then decided to reinstall Windows 10 on my computer but the BSODs kept coming.

The first one was KMODE_EXCEPTION_NOT_HANDLED (nvlddmkm.sys). Unfortunately I don't have a dump file from this crash because i forgot to configure the dump file.

I tried to reinstall my Nvidia drivers using DDU and install the latest drivers from Nvidias site.
In blue screen viewer I can see that TCPIP.sys i also mentioned.

I have also tried to run sfc /scannow and there was some problems that couldn't be fixed.
I then used the dism tool to repair it with a windows image.

After this the computer work for a day or two and it blue screen again.
This time it said KERNEL_SECURITY_CHECK_FAILURE and i then watch in the "WhoCrashed" program and ut said the source was ntkrnlmp.exe.
On internet some people said that this was solved by removing Hyper-V switches.
So I decided to remove Hyper-V from my computer (Awful software).

It worked again for a day or two and then it crashed again with the message KMODE_EXCEPTION_NOT_HANDLED and the source was: tcpip.sys.
But blue screen viewer says the source is nvlddmkm.sys.

I'm really starting to think this is a hardware issue but I hope it's a bad driver.
I hope some i this forum can help me with this issue I've attached the Zip file as requested.

Thanks in advance and excuse me i... Read more

Answer:Kmode_exception_not_handled bsod

The 7/1 dump inedicates a problem with nvlddmkm.sys and RTKVHD64.sys

Code:
fffff801`7ea78058 fffff801`0092987aUnable to load image nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x987a

nvlddmkm.sys is part of the driver for your NVIDIA GeForce GTX 970.


Code:
fffff801`7ea79020 fffff801`00000000Unable to load image RTKVHD64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for RTKVHD64.sys
*** ERROR: Module load completed but symbols could not be loaded for RTKVHD64.sys
RTKVHD64+0x50000

RTKVHD64.sys is part of the driver for Realtek Digital Output (Realtek High Definition Audio).

You have the latest driver for both of these:

0: kd> lmvm nvlddmkm
start end module name
fffff801`00920000 fffff801`01655000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Thu Jun 02 23:11:28 2016 (5750F560)
CheckSum: 00CEE995
ImageSize: 00D35000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

0: kd> lmvm RTKVHD64
start end module name
fffff800`fffb0000 fffff801`004ad000 RTKVHD64 T (no symbols)
Loaded symbol image file: RTKVHD64.sys
Image path: RTKVHD64.sys
Image name: RTKVHD64.sys
Timestamp: Tue... Read more

17 more replies
Relevance 55.35%

Hey guys,

i have a lot of BSOD in the last time.

Story:
I already had windows 10 running on my old system - without any BSOD.

I upgraded some Hardware a while ago (mainboard, graphics and processor) and did a clean installation of Windows 10...
Since then i got at least 2 BSOD each day (Even while writing this thread).
I did another clean insatllation of Windows 10 a few days ago, because i thought it might could solve the problem (...).
But it didn't help anything. I still get the same amount of BSOD.

What i already tried:
- Clean installation of windows 10
- updated BIOS
- Updated all drivers
- Installed only driver (without MSI Gaming App or Killer Network Suite)
- sfc /scannow (no errors)
- memtest (no errors)

My current system:

Computer name: REDHEAD
Windows version: Windows 10 , 10.0, build: 10586
Windows dir: C:\Windows
Hardware: MS-7917, MSI, Z97 GAMING 5 (MS-7917)
CPU: GenuineIntel Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz Intel586, level: 6
8 logical processors, active mask: 255
RAM: 17125896192 bytes total
Mainboard:
MSI Z97 GAMING 5 Intel Z97 So.1150 Dual Channel DDR3 ATX Retail
Processor:
Intel i7 4790k
Graphics:
6144MB MSI GeForce GTX 980 Ti Gaming 6G
RAM:
G.Skill 16GB RAM 1866MHz
Power supply:
Thermaltake Smart SE 630W ATX 2.3
Storage:
1x HDD 1TB
1x Samsung 850 EVO 256GB
1x Samsung 840 PRO 256GB

The dmp files are attached.

I appreciate your help and hope we can solve this problem togther.
Best regards,
Marcel

More replies
Relevance 55.35%

Hello, after upgrading to windows 10 from windows 8 I have been getting some weird BSOD crashes now and again, sometimes it?s days or weeks in between them and sometimes there are several on the same day.

The error message simply says "KMODE_EXCEPTION_NOT_HANDLED" without no further clues, I suspect a driver somewhere but haven?t been able to find where the problem stems from.
The crashes happen seemingly at random.

Thanks for your time

ANTONS-DATOR-2016-02-02_205233,02.zip

Answer:Kmode_exception_not_handled BSOD once or twice every other day

The dumpfiles are

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff8012eeed568, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt!KiIncrementConcurrencyCount+0 )
Followup: MachineOwner
-
The dumpfiles don't blame a specific driver.

Start updating the windows 10 drivers from the supportpage of your laptop http://www.acer.com/ac/en/GB/content/drivers

Also you have a outdated McAfee suite with drivers from 2014.
Please upgrade to a windows 10 compatible version.

0 more replies
Relevance 55.35%

A few weeks ago, I started getting the BSOD. It happened not long after a windows update. I did a rollback to before the update which didn't help and I did Dell's Backup and Recovery which also didn't work. Every time I have to restart the computer, it does 2-3 BSOD on restarts and then recovers on its own. Thanks for any help!

I attached my logs.

Answer:Bsod kmode_exception_not_handled

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

1 more replies
Relevance 55.35%

As in title. Using Dell 10 Latitude Tablet with Windows 8.1 (no problem with Dell original installed 8).BSOD only shows when going to Korean banking site.
Diagnostic zip file included. Thank you very much for any help with this problem

Answer:Kmode_exception_not_handled bsod

1 Windows Update installed. Most 8.1 systems have 26 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

You have a Broadcom 802.11abgn Wireless SDIO Adapter:





I do not recommend using wireless USB network devices. Especially in Win7/Win8 systems.
These wireless USB devices have many issues with Win7(and I suspect with Win8) - using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win7/Win8 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.



SSD's were temperamental when they first came out, but their reliability has improved greatly over the last year or two. There are 2 things that MUST be checked on systems with BSOD's and SSD's:




1) That the SSD firmware is the latest available for the SSD
2) That the storage controller drivers on the motherboard are the most recent. They must date from late 2012 or later. This is ALL controllers, not just the one that the SSD is attached to.



My biggest suspicion is AhnRghNt.sys - AhnLab Common Registry Hook Driver (appears to be part of a security program). Please uninstall it to see if the BSOD's stop (be sure to enable Windows Defender and the Windows Firewall while testings without the AhnLab program).

Also, Windows Defender i... Read more

2 more replies
Relevance 55.35%

Been recently encountering BSoDs with KMODE_EXCEPTION_NOT_HANDLED when gaming, specifically the open beta of Monster Hunter Online. Happens after around 2 hours or so. Doesn't happen with other games and has not happened before.

Attached my minidump and required information.

Thanks!

Answer:Bsod: Kmode_exception_not_handled

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

Uninstall Daemon ToolsDownload the SPTD standalone installer and follow these steps:
Double click the executable to open itClick on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window
You are missing a driver, unfortunately I haven't yet been able to find out from what this driver is.

Code:
*** WARNING: Unable to verify timestamp for TesSafe.sys
*** ERROR: Module load completed but symbols could not be loaded for TesSafe.sys
2: kd> lmvm tessafestart end module name
fffff801`bf1a0000 fffff801`bf3ac000 TesSafe T (no symbols)
Loaded symbol image file: TesSafe.sys
Image path: TesSafe.sys
Image name: TesSafe.sys
Timestamp: Thu Aug 20 12:49:13 2015 (55D5B0A9)
CheckSum: 0010F9D1
ImageSize: 0020C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

0 more replies
Relevance 55.35%

Hi everyone.

Quite a while back, I purchased an HP Pavilion Sleekbook with Windows 8. It had problems since the day I bought it around two months ago. The shop does not accept refunds. But this laptop has been in the PC clinic around 8 times since I bought it. The problem persisted, although the laptop was formatted many times, and the network card with the problematic driver (netr28x.sys) was replaced. it's crashed many more times since I brought it back, so I got fed up and disabled the network card. I had an old wireless adapter lying around, so I connected that to the computer earlier today. It was working fine for a little while... and then yep. Bluescreen. This time the error was KMODE_NOT_LESS_OR_EQUAL (intelppm.sys). I've attached the files that the SF Diagnostic Tool yielded. I believe four of the five dumps are from before, caused by netr28x.sys, and the latest one is this new error.

Thanks in advance.

Answer:BSOD with KMODE_EXCEPTION_NOT_HANDLED

I would be on the phone with HP right now. HP's warranty is 1 year - and Win8 came out last October - so you should have about 2 months left on your warranty.

The latest memory dump is suggestive of a hardware problem (see the Usual Causes listed here: BSOD Index ).
Although driver problems are possible with this error, your having reformatted it several times should have ruled that sort of issue out.
You must remove the wireless USB network adapter to completely rule out driver problems (as these devices tend to crash a lot). Here's my canned speech about them:





I do not recommend using wireless USB network devices. Especially in Win7/Win8 systems.
These wireless USB devices have many issues with Win7(and I suspect with Win8) - using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win7/Win8 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful. (For laptops I suggest using the in-built wireless card, or the in-built wired connection)



Meanwhile, you can start with these hardware diagnostics: Hardware Diagnostics

Analysis:
The following is for informational purposes only.

Code:
**************************Mon Aug 26 07:52:44.512 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\082613-30296-01.dmp]
Windows 8 Kerne... Read more

3 more replies
Relevance 55.35%

I never really had any problems with my computer until upgrading to Windows 10, now I am having very frequent crashes that all seem to be similar. My guess is memory corruption, but I can't figure out the cause of it.
The crashes are pretty random, they can happen when I'm playing a game or when I'm simply browsing in Chrome.

Things I have done to try an resolve the issue:
Clean Install of Windows
Installed lasted MB BIOS
Ran Driver Verifier (still running)
Configured my RAM timings and voltage to match manufacturers recommended specs.

Also I had and AMD overclocking driver installed, I removed it. So nothing should be overclocked.

Please help! Thanks

Answer:Several BSOD KMODE_EXCEPTION_NOT_HANDLED

Another crash just occurred a few minutes ago. The bug check this time was DRIVER_IRQL_NOT_LESS_OR_EQUAL, and it was caused by dxgmms2.sys. Perhaps I need to do a clean install of my AMD graphics drivers?

Attached is the dump from the crash.

24 more replies
Relevance 55.35%

Hi guys I have recently built this new PC using my old hard drives and GPU. I have been experiencing many BSOD which I have been googling for fixes for days and new ones just keep popping up I'm out of ideas here any help would be greatly appreciated.

Things I have done - Reinstalled Windows 7 on SSD.
Reinstalled Windows 7 on Hard Drive.
Windows repair multiple times and many Windows 7 reinstall.
Uninstalled and reinstalled graphics drivers and tried other drivers.
Installed all drivers from motherboard disk.
Installed all Windows 7 updates and running service pack 1.
Disabled / enabled XMP in motherboard bios / manually set timing and voltage on ram
Checked temperature on parts - Motherboard 20-25c GPU 30-70c CPU 20-50
Updated devices in Device Manager.
Re seated RAM / tried with one stick and still BSOD.

Thanks for the help. I have attached my crash dumps below!

Answer:Many different BSOD KMODE_EXCEPTION_NOT_HANDLED 1E

The BSOD is caused by your Corsair M65 Gaming Mouse driver.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: 0000000000000000, The exception code that was not handled
Arg2: 0000000000000000, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: 0000000000000000, Parameter 1 of the exception

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for SnakeEyes.sys
*** ERROR: Module load completed but symbols could not be loaded for SnakeEyes.sys
*** WARNING: Unable to verify timestamp for iusb3hub.sys
*** ERROR: Module load completed but symbols could not be loaded for iusb3hub.sys
*************************************************************************
*** ***
*** ... Read more

1 more replies
Relevance 55.35%

Greetings,

Since 5 days i got randomly costanly BSOD's uploading loading or leaving the welcome screen.

i uploaded a rar with all the DUMP's

System spec:
Windows 7 64 BIT ultimate SP1
AMD Athlon X4 750K Quad Core Processor -3.4GHZ
8 GB Ram
Nvidia 460 1GB Zotac

Answer:BSOD KMODE_EXCEPTION_NOT_HANDLED

Hi,

We have two consistent bug checks:
KMODE_EXCEPTION_NOT_HANDLED (1e)

This indicates that a kernel-mode program generated an exception which the error handler did not catch.

BugCheck 1E, {ffffffffc0000005, fffff800044ff150, 0, ffffffffffffffff}

^^ 0xc0000005 = access violation.


Code:

3: kd> kv
Child-SP RetAddr : Args to Child : Call Site
fffff880`0a7a5dd8 fffff800`04524738 : 00000000`0000001e ffffffff`c0000005 fffff800`044ff150 00000000`00000000 : nt!KeBugCheckEx
fffff880`0a7a5de0 fffff800`044d9242 : fffff880`0a7a65b8 7ffffa80`03ddacf0 fffff880`0a7a6660 00000000`00000003 : nt! ?? ::FNODOBFM::`string'+0x487ed
fffff880`0a7a6480 fffff800`044d7b4a : 00000000`00000001 fffff880`00000000 fffff880`0a7a6a00 fffffa80`095d9910 : nt!KiExceptionDispatch+0xc2
fffff880`0a7a6660 fffff800`044ff150 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiGeneralProtectionFault+0x10a (TrapFrame @ fffff880`0a7a6660)
fffff880`0a7a67f0 fffff800`044fd90f : fffffa80`069000c8 00000000`00000005 fffffa80`03ddfaf0 00000000`00000005 : nt!MiReplenishPageSlist+0xc0
fffff880`0a7a6860 fffff800`044e7044 : 00000000`00000000 00000000`00000002 00000000`00000000 ffffffff`ffffffff : nt!MiRemoveAnyPage+0x24f
fffff880`0a7a6980 fffff800`044d7cee : 00000000`00000001 00000000`048ea000 00000000`7efdb001 00000000`00012597 : nt!MmAccessFault+0x1224
fffff880`0a7a6ae0 00000000`74678b0e : 00000000`00000000 0... Read more

5 more replies
Relevance 55.35%

Been recently encountering BSoDs with KMODE_EXCEPTION_NOT_HANDLED when gaming, specifically the open beta of Monster Hunter Online. Happens after around 2 hours or so. Doesn't happen with other games and has not happened before.

Attached my minidump and required information.

Thanks!

Answer:Bsod: Kmode_exception_not_handled

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

Uninstall Daemon ToolsDownload the SPTD standalone installer and follow these steps:
Double click the executable to open itClick on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window
You are missing a driver, unfortunately I haven't yet been able to find out from what this driver is.

Code:
*** WARNING: Unable to verify timestamp for TesSafe.sys
*** ERROR: Module load completed but symbols could not be loaded for TesSafe.sys
2: kd> lmvm tessafestart end module name
fffff801`bf1a0000 fffff801`bf3ac000 TesSafe T (no symbols)
Loaded symbol image file: TesSafe.sys
Image path: TesSafe.sys
Image name: TesSafe.sys
Timestamp: Thu Aug 20 12:49:13 2015 (55D5B0A9)
CheckSum: 0010F9D1
ImageSize: 0020C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

3 more replies
Relevance 55.35%

Hi everyone,

Got a friend who has been having some issues with her computer. SHe has been getting BSOD's very randomly while she is using her computer. While i have not seen the blue screen yet, she has quite a few dump files to prove her issue. I've included the dump file along with other information in a zip file. I hope you guys can help me. It is a custom build computer

Cyberpower gaming PC

14gb of ram
Intel Core I7 3.06Ghz
AMD Radeon HD 6800 Series Gfx card
Gigabyte Technology Motherboard

IF you guys need anymore info, let me know, im in a rush and didnt have time to dl cpu-z.

Thanks again in advance. Im always second guessing myself when i see a kernal error.

Answer:Bsod kmode_exception_not_handled

It is Gigabyte On-Off Charger.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000005, fffff800031a835a, 0, 4e}

*** WARNING: Unable to verify timestamp for AppleCharger.sys
*** ERROR: Module load completed but symbols could not be loaded for AppleCharger.sys
Probably caused by : AppleCharger.sys ( AppleCharger+26c0 )

Followup: MachineOwner
---------
And the driver is too old.

Code:
fffff880`02ff7000 fffff880`02fff000 AppleCharger T (no symbols)
Loaded symbol image file: AppleCharger.sys
Image path: \SystemRoot\system32\DRIVERS\AppleCharger.sys
Image name: AppleCharger.sys
Timestamp: Thu Apr 22 12:35:49 2010 (4BCFF54D)
CheckSum: 00011A72
ImageSize: 00008000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Better you uninstall the driver, and all Gigabyte bloatware you have installed.

But if it is any emergency to use, first you may try to update it and see the situation. GIGABYTE - Support & Downloads

Also, the NEC USB 3 drivers are too old.

Code:... Read more

5 more replies
Relevance 55.35%

Here's my latest BSOD. Seems like the last one was fixed by updating my Direct X drivers...

So, the BSOD seems to continue with a new fault!

Answer:BSOD - KMODE_EXCEPTION_NOT_HANDLED (1e)

Current threads by this member (a bit confusing to me):
http://www.sevenforums.com/crashes-d...exception.html
http://www.sevenforums.com/crashes-d...andled-1e.html
http://www.sevenforums.com/crashes-d...s-anymore.html

4 more replies
Relevance 55.35%

I'm New i'll try to post my problem :

from bluescreenview program :

KMODE_EXCEPTION_NOT_HANDLED
bug check code 0x0000001e

parameter 1 ffffffff`c0000005
parameter 2 fffff800`02a82d97
parameter 3 00000000`00000000
parameter 4 00000800`00000001

caused by driver ntoskrnl.exe
caused by adress ntoskrnl.exe+71f00

then i would like to post you the minidump file but in my windows 7 if i try to open it , it says : access denied.

My 2 Dump Files Downlodable here ( i cannot open them and paste it says : access denied )

http://www.************/file/-Cz8HUM...-26722-01.html
http://www.************/file/whb4BOf...-35739-01.html

Answer:Bsod kmode_exception_not_handled

Blue Screen of Death (BSOD) Posting Instructions

1 more replies
Relevance 55.35%

I was listening to music and doing some reading for college when all of the sudden my computer crashed. The error code I was presented with was "KMODE_EXCEPTION_NOT_HANDLED"
When googling the problem, I am only able to find answers relating to Windows 2000, and those answers involve this BSOD occurring upon start-up. This just randomly occurred while listening to music using VLC media player.
Here is more information about the problem.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\020911-23852-01.dmp
C:\Users\Alexander\AppData\Local\Temp\WER-33821-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Edit: I finally found the topic Mak posted about troubleshooting stop codes. I have not installed any thing recently, so my problem is still unresolved.

Edit#2: It turns out that windows did download updates today, but I have not restarted my computer to install these updates until after I have had this BSOD occur.

Answer:BSOD KMODE_EXCEPTION_NOT_HANDLED

Mak mentions that this could be caused by "invalid memory and access violations caused by faulty drivers or hardware devices" would this point to faulty RAM?

3 more replies
Relevance 55.35%

Hi,

I've been having a lot of crashes lately while on games. Below is the log of WhoCrashed

Is there anything I can do to analyse this and resolve the crashes?


Quote:




Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dump directory: C:\WINDOWS\Minidump

Crash dumps are enabled on your computer.

On Sun 07/08/2016 11:34:27 GMT your computer crashed
crash dump file: C:\WINDOWS\Minidump\080716-11234-01.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF800CBE936AA, 0x0, 0xFFFFFFFFFFFFFFFF)
Error: KMODE_EXCEPTION_NOT_HANDLED
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Tue 02/08/2016 21:04:54 GMT your computer crashed
crash dump file: C:\WINDOWS\Minidump\080216-13453-01.dmp
This was probably caused by the following module: ntfs.sys (NTFS!TxfCompareTxfFcbTableEntries+0x17)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF800766BC6C7, 0x0, 0xFFFFFFFFFFFFFFFF)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\WINDOWS\system32\drivers\ntfs.sys
product: Microsoft? Win... Read more

More replies
Relevance 55.35%

This happened a few days ago and only once. I had a few applications open, nothing too taxing.

I've only ever had one other BSOD, months ago. I can't find where I wrote down what the previous BSOD was, but it was not the same as this most recent BSOD.

Answer:Kmode_exception_not_handled bsod

There are enough signs here that I have to wonder about this installation. Should this be a pirated copy of Windows, please be aware that we may not be able to fix it (as the hacks that were done to activate it will cause the OS to behave differently than we expect it to). If that's the case, our efforts to help may just waste your time. Secondly, the forum rules prohibit assisting with pirated software - so the topic would be closed if that is the case.

Please provide this report:





License Information (Windows 8)
Right click on the buttonClick on Command prompt =>Inside the Command Prompt windows copy and paste the following command
licensingdiag.exe -report "%userprofile%\Desktop\report.txt" -log "%userprofile%\Desktop\repfiles.cab"
Once finished please go to your desktop -> You will see two files report.txt and repfiles.cab -> Please select both files and add them into a zip fileUpload this zip file to your next reply

1 more replies
Relevance 54.94%

Repeatedly experiencing the above BSOD. Started happening after upgrading from Windows 7 to 10. I initially thought I'd resolved it by downloading the latest Marvell driver but it appears the BSOD just didn't trigger for a week or two.

Would appreciate some help in trying to resolve. BSOD seems to happen mostly when downloading (from Steam for example).

Thanks

Answer:BSOD KMODE_Exception_Not_Handled (mv91xx.sys)

It seems to be caused by Marvell Storage Controller.
Open "Computer Management" > Select "Device Manager" > Expand "Storage Controllers"

You should see the Marvell’s controller, right-click on the “Marvell’s Controller *Something* ” > Click the "Details tab", scroll for Hardware ID, copy the shortest hardware ID, paste it in the search field in devid.info and download the newest driver you can find for the newest version of Windows. Run the driver install and reboot your system.

10 more replies
Relevance 54.94%

Hi, windows ten crashes once a day after the last major update, the BSOD indicates: KMODE_EXCEPTION_NOT_HANDLED

Everything I've looked at so far has indicated driver errors but I can't work out which ones. I'm at a loss I hope someone can advise me of what the dump files mean and help me out.

Here are some specs: Operating System: Windows 10 Pro 64-bit CPU: Intel Core i7 4790K @ 4.00GHz RAM: 32,0GB Dual-Channel DDR3 @ 999MHz (9-11-11-31) Motherboard: ASUSTeK COMPUTER INC. Z97-DELUXE (SOCKET 1150)
Graphics: 3071MB NVIDIA GeForce GTX 780 Ti (EVGA)

Attached to the post you can find the dump files.
Thanks.

Answer:BSOD Kmode_exception_not_handled netio.sys

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

Please uninstall Bitdefender, use Windows Defender as alternative and let me know how it goes
Uninstall Bitdefender

Code:
ffffd000`20938668 fffff800`890471c8Unable to load image \??\C:\Program Files\Common Files\Bitdefender\Bitdefender Firewall\bdfwfpf.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for bdfwfpf.sys
*** ERROR: Module load completed but symbols could not be loaded for bdfwfpf.sys
bdfwfpf+0x71c8

0 more replies
Relevance 54.94%

This is a Lenovo Erazer x510 that I purchased brand new 2 months ago. I have not had any problems at all up until today. I started getting the BSOD KMODE_EXCEPTION_NOT_HANDLED and have tried to clean the registry, I have done a Malwarebytes scan (nothing), NAV scan (nothing), tried to restore from previous point (still BSOD), and have run out of ideas. In the Device Manager I do NOT have any "Unknown Device" icons, but there is a Yellow Exclamation next to "System Firmware".

Your help would be GREATLY appreciated, because I use this computer for work and I am very limited within Safe Mode.

I have attached the SF log.

Thank you so much in advance for your time and assistance!

-Shane

Attachment 53375

Answer:BSOD: KMODE_EXCEPTION_NOT_HANDLED at Boot

You have a ASUS USB-AC56 802.11ac Wireless USB Adapter - why are you using that and not the built in wireless device?





I do not recommend using wireless USB network devices. Especially in Win8/8.1 systems.
These wireless USB devices have many issues with Win7 and later - using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win8/8.1 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.



This device has issues in Device Manager:





Lenovo Primary iM Controller ROOT\SYSTEM\0001 This device is not working properly because Windows cannot load the drivers required for this device.



See this link: https://forums.lenovo.com/t5/ThinkPa...e/td-p/1602834

Please ensure that Driver Verifier is turned off.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

npf.sys Fri Jun 25 12:50:58 2010 (4C24DE72)
WinPcap library driver
npf.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

PcaSp60.sys ... Read more

3 more replies
Relevance 54.94%

Hello All,
I recently updated to windows 10 from 7. Yesterday i used my computer for over 12 hours, then put it to sleep and after another 8 hours of usage today I received a BSOD as stated in the title. I have uploaded the dmp file. Thank you all in advance.

regards,
Goots

More replies
Relevance 54.94%

Greetings,
Since last friday my pc is hanging with weird BSOD's all the time at random times with diffrent errors.
The first one, DRIVER_OVERRAN_STACK_BUFFER, was related to nvidia driver as i saw this: nvlddmkm.sys.
So i reinstalled the drivers after removing the old one's in safe mode with DDU (Using 382.05).
After one day, another BSOD but this time KMODE_EXCEPTION_NOT_HANDLED with the same nvlddmkm.sys.
I was thinking might be buggy driver but even with older ones (381.89) had this BSOD aswell.
Brand new GTX 1080 Ti aorus xtreme edition

Windows 10 pro 64 bit creators update
Core i7 6900K at 4 Ghz, 64GB RAM HyperX predator 3000Mhz, ASUS ROG Rampage V Edition 10.

All the drivers (USB, etc are up to date), Mobo bios up to date.
Did memtest86 for 36hrs (8 passes) all good (saw other posts that recommending to perform a memtest so i did it).

I'm starting to think that i got a defective gpu here.
Posting a dump as the pinned post tells to do.

Answer:BSOD While in desktop, KMODE_EXCEPTION_NOT_HANDLED

Two fo the 3 dumps indicate a problem with your Nvidia card or driver.

Code:
BugCheck 1E, {ffffffffc0000005, fffff80eb9ead7a3, 0, ffffffffffffffff}
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : memory_corruption
Followup: memory_corruption
---------

You have driver version 381.89 dated 19.04.2017.

There is a newer driver available, give it a try:

GeForce Game Ready Driver Version:
382.05 WHQL

Release Date:
2017.5.4

Operating System:
Windows 10 64-bit

Language:
English (US)

File Size:
... Read more

3 more replies
Relevance 54.94%

Hi all,

I'm having a problem with a variety of BSODs, usually within a few minutes of booting the system. If the system hasn't blue screened within that first few minutes, it stays up and doesn't crash thereafter. These blue screens are usually one of the following:

KMODE_EXCEPTION_NOT_HANDLED
PAGE_FAULT_IN_NONPAGED_AREA
MEMORY_MANAGEMENT
BAD_POOL_HEADER

Everything I've read indicates this is a driver problem. I have recently run memtest without any problems. I can't remember how many passes, but i left it running overnight, so must have been a few!

I've attached the output from SF Diagnostic Tool (which so far as i can tell, has just grabbed all recent minidumps amongst other things).

Some of those minidumps will show crashes caused by driver verifier - it didn't like a virtual serial port driver which was used to get a dual shock 4 controller working in windows. I removed that driver and the underlying BSODs described here, which can also been seen in the minidumps, have unfortunately not stopped. I have a licence for WhoCrashed and all that's able to tell me is that the problem is likely caused by a driver which cannot be identified.

I have used WinDbg !anaylze -v on the most recent crash dump (ntkrnlmp.exe KMODE_EXCEPTION_NOT_HANDLED). Windows was configured to produce kernel memory dumps. Here's the output from that:


Code:
*******************************************************************************
* ... Read more

Answer:BSOD ntkrnlmp.exe KMODE_EXCEPTION_NOT_HANDLED

Hi Funk3h and welcome to the forums ^_^,

I have analyzed your dump files and there are many bugchecks or they are random. Below is a list of the 3rd party drivers which are found on your system :-

Code:
**************************Tue Jul 8 00:25:29.742 2014 (UTC + 5:30)**************************
speedfan.sys Sun Sep 24 18:56:48 2006 (45168798)
DDCDrv.sys Tue Apr 8 13:20:11 2008 (47FB23B3)
adfs.SYS Fri Jun 27 02:22:37 2008 (48640195)
PxHlpa64.sys Wed Jun 24 04:46:35 2009 (4A416253)
emupia2k.sys Wed Jul 7 19:08:03 2010 (4C34833B)
ctsfm2k.sys Wed Jul 7 19:08:10 2010 (4C348342)
ctoss2k.sys Wed Jul 7 19:08:24 2010 (4C348350)
ha20x22k.sys Wed Jul 7 19:11:25 2010 (4C348405)
ctaud2k.sys Wed Jul 7 19:12:14 2010 (4C348436)
ctprxy2k.sys Wed Jul 7 19:12:17 2010 (4C348439)
CTEXFIFX.SYS Wed Jul 7 19:14:03 2010 (4C3484A3)
CT20XUT.SYS Wed Jul 7 19:14:15 2010 (4C3484AF)
CTHWIUT.SYS Wed Jul 7 19:14:19 2010 (4C3484B3)
AsUpIO.sys Tue Aug 3 08:17:59 2010 (4C57835F)
bcmwlhigh664.sys Tue Apr 19 12:43:08 2011 (4DAD3604)
afcdp.sys Wed Jul 20 20:16:03 2011 (4E26EA2B)
ASUSFILTER.sys Tue Sep 20 21:16:33 2011 (4E78B559)
scmndisp.sys Mon May 28 13:21:48 2012 (4FC32E94)
AsIO.sys Wed Aug 22 15:24:... Read more

4 more replies
Relevance 54.94%

Having BSOD's kmode_exception_not_handled athw8x.sys PITB on a new system build which seems to be a common one everyone is having!!

Thank you!

Answer:BSOD's kmode_exception_not_handled athw8x.sys

Took a quick peek at the athw8x.sys logs and it appears that you are trying to install an Aetheros wireless adapter driver (and it failed). Is this a PCI add-on wireless card that you are trying to use on a desktop?

2 more replies
Relevance 54.94%

Recently i have been getting numerous BSOD from going to music sites each time. I use Whocrashed to figure out whats the problem and this is what i get:

On Mon 10/1/2012 4:13:04 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\100112-33165-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7F1C0)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF80002F746EA, 0x1, 0x18)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.
On Mon 10/1/2012 4:13:04 AM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF80002F746EA, 0x1, 0x18)
Error: KMODE_EXCEPTION_NOT_HANDLED
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The cras... Read more

Answer:BSOD while going to certain websites KMODE_EXCEPTION_NOT_HANDLED, more

http://www.sevenforums.com/crashes-d...tructions.html

9 more replies
Relevance 54.94%

hi all!
I had some BSOD with my windows 8. I usually check for update but I still got this problem.
please help me!
thanks all!

Answer:BSOD in windows 8 x64 KMODE_EXCEPTION_NOT_HANDLED

Only 48 Windows Updates installed. Most systems have 66 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

D: drive only has about 9% free space; E: only has about 2% free space; F: only has about 5% free space. Windows likes 15% free space in order to perform stuff "behind the scenes" without adversely affecting the system's performance. Please free up 15% on ALL hard drives (you can get away with 10% on larger drives and won't notice a large performance penalty)

Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard.

Please run these free hardware diagnostics: Initial Hardware Diagnostics. Let us know the results and we can move on from there. I'm particularly concerned about the memory (RAM) so run that test first.

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Windows systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions).





Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration... Read more

4 more replies
Relevance 54.94%

Possible TP-Link wireless driver as culprit. Not ruling out user error.

Let me know if I failed to upload all the necessary info. I tried to read the posting rules thoroughly.

Sorry for the troll-bot username. It sounded funnier when I registered than it actually is.

- Franky

Answer:BSOD When Shutting down, KMODE_exception_not_handled

The three of your recent crashes are caused by either NETIO.sys, or tcpip.sys. Both are network related.

The network driver you actually use is Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC. And, the driver is somehow old.

Code:
0: kd> lmvm rt64win7
start end module name
fffff880`04a17000 fffff880`04a8c000 Rt64win7 (deferred)
Image path: Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Thu Apr 21 23:45:33 2011 (4DB07445)
CheckSum: 00076017
ImageSize: 00075000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
So you should update the network driver, available at Realtek.

To update the drivers, follow the steps:
First, download the network card driver from manufactuer's website.
Then reinstall the driver:
Click the Start Button, type "devmgmt.msc" (without quotation marks) in the Start Menu Search box and press Enter.
Double click to expand "Network adaptors".
Right click your network card and click Uninstall.
Check "Delete driver software for this device" check box, click OK.
Restart the computer
If windows does not auto configure the appropriate drivers at startup, install the downloaded one manually.
Let us know the results.

9 more replies
Relevance 54.94%

Hi Bleeping,
 
For the past few weeks, I have been receiving BSOD's, which appear to be in relation to stressing the network card when downloading or even browing for periods of time.
 
I have done the usual -
 
SFC/ scannow
memtest
driver updates
checked windows updates and rolled back several "just in case"
 
I am now stuck!
 
Subsequently, I am uploading SysnativeFileCollectionApp.zip and perfmonreport.zip.
 
Can someone please tale a look and see if they can spot anything.
 
Here's the rundown -
 
OS - Windows 2008 R2 Sp1 (build 7601)
x64
Installed full retail from scratch
Hardware in a HP N40L, about 2 years old.
 
CPU = AMD Turon II NEO (dual core)
GRaphics card - onboard Mobility Radeon HD 4200
 
Help appreciated!
 
 

More replies
Relevance 54.94%

Getting a KMODE_EXCEPTION_NOT_HANDLED crash as well as SYSTEM_SERVICE_EXCEPTION crash. The pc is brand new build with just office 2013 bria 3 and our works truckmate trucking software installed. The anti virus being used is eset 4 business edition. The motherboard is a gigabyte H81M-S2H with an intel i5 cpu and 8 gigs of ram. Some help finding the driver causing this crash would be wonderful.

Thanks

Answer:bsod at random KMODE_EXCEPTION_NOT_HANDLED

Hello, keystone. Please upload the BSOD Posting Instructions http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html. Upload the files here, this will tell you how. http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html

Please fill out your System Specs


   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.

If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs

Your dump file from today lists


Code:
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc000001d, fffff80003cab64c, 0, 0}
Probably caused by : memory_corruption ( nt!MmQueryMemoryListInformation+bc )
Followup: MachineOwner
Please ... Read more

1 more replies
Relevance 54.94%

Hello All,
I recently updated to windows 10 from 7. Yesterday i used my computer for over 12 hours, then put it to sleep and after another 8 hours of usage today I received a BSOD as stated in the title. I have uploaded the dmp file. Thank you all in advance.

regards,
Goots

Answer:BSOD KMODE_EXCEPTION_NOT_HANDLED (ndis.sys)

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions

There is a lot more information available that I need to see that will be contained in the zip file you will upload after running DM_Log_collector.

Also, all thart was in the zip file was a shortcut, not the actual dump file itself. DM_Log_collector will handle all that for you.

5 more replies
Relevance 54.94%

hi. i was encountered an bsod just 2 days after i bought my laptop.
i got free upgrade of RAM which the seller installed and i attached the view from cpu-z.
after i brought it home, i installed chrome, updated windows, updated nvidia driver, installed steam and games.
the first bsod is while i was playing team fortress 2. after that i managed to reset the laptop using USB recovery drive i made before. some said there were mouse issue in other forum, but i uninstalled the mouse's software and still got bsod.

my laptop automatically went to sleep in 2 minutes even the setting is never sleep.

then i ran verifier and got bsod just after i logged in. so i entered safe mode to turn verifier off.
in device manager, there is exclamation mark on generic non pnp monitor. i tried to update, disable and enable it but no luck.

the last bsod is while i was downloading game via steam and do some browsing and harddisk defragment. please help me since this laptop is just 6 days in my hand. i am really frustrated and dunno what to do.

Answer:BSOD KMODE_EXCEPTION_NOT_HANDLED on ROG G750JX

Please turn Driver Verifier off.
To do this, open verifier.exe and select "Delete existing settings"
Then click on "Finish" and reboot in order for the changes to take effect.

As this is a new system, why haven't you updated to Win8.1?

The verifier memory dumps seem to have been initiated my McAfee - so I'd suggest uninstalling it.
Ensure that you enable Windows Defender and the Windows Firewall after removing McAfee

The other memory dump blames your ASUS Gaming Mouse GX850 Driver.
Please:
- download a fresh copy of the latest, Win8 compatible driver for the ASUS Gaming Mouse GX850
- uninstall the current ASUS Gaming Mouse GX850 software/driver on your system
- install the freshly downloaded drivers
- monitor for further BSOD's

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

DO NOT uninstall this one, only update it:
ASMMAP64.sys Thu Jul 2 05:13:26 2009 (4A4C7A36)
LENOVO ATK Hotkey ATK0101 ACPI UTILITY (also found in Asus systems)
http://www.carrona.org/drivers/driver.php?id=ASMMAP64.sys

PXGX112.sys Fri Jul 22 04:10:37 2011 (4E29307D)
ASUS Gaming Mouse GX850 Driver
PXGX112.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if addition... Read more

7 more replies
Relevance 54.94%

I need help if possible. Win2K was running fine until
I installed service pack 4. On the reboot, I got the
following BSOD: KMODE_EXCEPTION_NOT_HANDLED Address
804200E4 base at 80400000, DateStamp 3ee6c002 -
ntoskrnl.exe. I can't find a way to bring it back up.
None of the safe modes nor "last known good" will
work. I'm pretty well stuck. I have found several
references to this type of problem but all of them can
come up in safe mode. I am guessing that my main goal
at this point should be to find some very creative way
to uninstall spk4 after using a bootdisk or 3rd party
program. Another option might be to find a 3rd party
program that will let me launch add/remove programs as
part of its' environment. If I am heading down the
wrong path, please let me know. All help is greatly
appreciated. Thanks
 

Answer:W2K kmode_exception_not_handled BSOD spk4

try through the recovery console found this guide while surfing
[GUIDE]: Using the Windows XP Recovery Console
There is a common misconception that NTFS volumes cannot be accessed from the command line, and that you're in a mess if you can't boot into XP.
This is not true. The Windows XP Recovery Console can be used to modify files from the command line if you can't boot into Windows, even on NTFS partitions. This guide describes how the Recovery Console can be used.

What can you do from the Recovery Console?
You can enable and disable services, format drives, repair the boot record, read and write data on a local drive (including drives that are formatted to use the NT File System (NTFS), and perform many other administrative tasks.

NOTE: By default, the Recovery Console allows you to access only the root folder, the WINDOWS folder (and it's subfolders), and removable drives such as the CD-ROM. Also, it will not allow you to copy files to removable media such as floppies. However, you can make some changes that will allow you to access all folders on your drives, as well as copy files to removable media. Follow the steps below:

Allow Access to all folders and removable media:
1. Click Start, click Run, type mmc in the Open box, and then click OK.
2. On the File menu, click Add/Remove Snap-in, and then click Add.
3. Click Group Policy, and then click Add.
4. Click Local Computer, click Finish, and then click Close to return to the Add/Remove Snap-in di... Read more

3 more replies
Relevance 54.94%

4 BSOD in the last 3 days (only 2 dump files though, don't know why). 2 while browsing in Firefox (v57), 1 while working in Photoshop CS5, the last one I can't remember which program I was using when it happened.

Each time it happened, the BSOD is there for a few seconds, then the PC reboots.

The DM Log Collector file is attached.

Any help is highly appreciated.

Guts

More replies
Relevance 54.94%

Hi.
I've bought new PC:

Motherboard: MSI Z97 GAMING 5 LGA 1150
CPU: INTEL Core i7 4790 with Cooler Master "Hyper 212 Evo RR-212E-20PK-R2"
GPU: MSI Geforce GTX 970, GTX 970 GAMING 4G, 4Гб
RAM: CRUCIAL CT102464BA160B DDR3 - 2x8Гб 1600
SSD: 128ГБ 2.5" Plextor "M6S" (SATA III)
HDD: Seagate "ST2000DM001" (SATA III)
ATX FRACTAL DESIGN Core 3500, (FD-CA-CORE-3500-BL) with AEROCOOL Strike-X 600
DVD-RW SAMSUNG SH-224DB/BEBE

I've got BSOD without showing it (even when this option enabled) in random time. Try to plug-off SDD, HDD, video, Ram in different variations. Even try to install windows on HDD without SSD.

I've got the latest versions of BIOS, SSD-firmware and drivers for motherboard and GPU. PC without any OC settings

That's .dmp file 120914-7500-01.zip and its analyze by windbg


Code:
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred http://msdl.microsoft.com/download/symbols
Symbol search path is: http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17031.amd64fre.winblue_gdr.140221-1952
Machine Name:
Kernel base = 0xfffff800`b660f000 PsLoadedModuleList = 0xfffff800`b68d92d0
Debug session time: Mon Dec 8 12:44:09.862 2014 (UTC - 8:00)
System Uptime: 0... Read more

More replies
Relevance 54.94%

hey everyone,

I happen to get this BSOD after trying to access certain folders in my data drive. (D: Drive)
I ran CheckDisk because I found it was taking a very long time to access these files. I ran it and it corrected the errors. All my other hard drives had no errors.
Now i'm getting this KMODE_EXCEPTION_NOT_HANDLED(iaStorA.sys) blue screen of death and it has happened twice.

FYI
Bios up to date, every driver is up to date, very windows update is on it. I am using an SSD as my C: drive and I only strictly use it for Windows 8, no other data besides that.

If any more information needed, let me know. Thanks in advance

File is attached...

Answer:KMODE_EXCEPTION_NOT_HANDLED(iaStorA.sys) BSOD

iaStorA.sys is part of the Intel matrix storage manager driver file and might be corrupted. I suggest to download this package for your mother board and re-install it.

4 more replies
Relevance 54.94%

Only seems to have started in the past week or so.

Usually use uTorrent with NordVPN.
After about 10-15 mins, BSOD " kmode_exception_not_handled "
Tried a different torrent client. Same problem.
Tried other things with NordVPN connected... seems fine. So it only seems to be torrenting.

I've been browsing, gaming, watching videos.... no issues. Was on GTA5 yesterday for hours.. and that pushes my system = no problems. So it only seems to be torrenting that produces the BSOD.

Updated wifi drivers. Hasn't helped.
Checked Windows update. All up to date.

Log attached. Any ideas ??
ta

More replies
Relevance 54.94%
Answer:kmode_exception_not_handled windows BSOD

Hi Towelyey,

Welcome to the 10forums

Please remove AVG and replace it with Windows Defender, AVG caused all the crashes.


Code:
1: kd> k
# Child-SP RetAddr Call Site
00 ffffd000`210a1328 fffff802`79bd7b2b nt!KeBugCheckEx
01 ffffd000`210a1330 fffff802`79b6a0f6 nt!KiFatalFilter+0x1f
02 ffffd000`210a1370 fffff802`79b4a07f nt! ?? ::FNODOBFM::`string'+0xff6
03 ffffd000`210a13b0 fffff802`79b6082d nt!_C_specific_handler+0x9f
04 ffffd000`210a1420 fffff802`79ab2c19 nt!RtlpExecuteHandlerForException+0xd
05 ffffd000`210a1450 fffff802`79ab1028 nt!RtlDispatchException+0x429
06 ffffd000`210a1b50 fffff802`79b653c2 nt!KiDispatchException+0x144
07 ffffd000`210a2230 fffff802`79b63aa1 nt!KiExceptionDispatch+0xc2
08 ffffd000`210a2410 fffff800`3efa3920 nt!KiPageFault+0x221
09 ffffd000`210a25a8 fffff800`3f2a1162 NETIO!WfpNblInfoGet // Here occured an illegal operation while saving the data to the pagefile
0a ffffd000`210a25b0 fffff800`3f31137f fwpkclnt!FwppNetBufferListEventNotify+0x32
0b ffffd000`210a2690 fffff800`3ee7ef33 wfplwfs!LwfLowerReturnNetBufferLists+0x5f
0c ffffd000`210a26e0 fffff800`3ee9239e ndis!ndisCallReceiveCompleteHandler+0x33
0d ffffd000`210a2720 fffff802`79abee95 ndis!ndisDataPathExpandStackCallback+0x3e
0e ffffd000`210a2770 fffff800`3ee952a1 nt!KeExpandKernelStackAndCalloutInternal+0x85
0f ffffd000`210a27c0 fffff800`3eec4883 ndis!ndisExpandStack+0x19
10 ffffd000`210a2800 fffff800`3ee9e803 ndis!ndisInvokeNextReceiveCompleteHandler+0x223
11 ffffd000... Read more

2 more replies
Relevance 54.94%

Hello,

After building my new computer i've been receiving a BSoD every day. The most common of these is KMODE_EXCEPTION_NOT_HANDLED. I've tried completely uninstalling and reinstalling Graphics Drivers, testing the RAM and the Hard Drive. Any help is appreciated

-Jon

Answer:Windows 8.1 BSoD KMODE_EXCEPTION_NOT_HANDLED

AMD OverDrive (AODDriver2.sys) is either a stand-alone application, or a component of the AMD VISION Engine Control Center. This driver is known to cause BSOD's on some Win7 systems.
Please un-install all AMD/ATI video stuff from Control Panel...Programs...Un-install a program
Then, download (but DO NOT install) a fresh copy of the ATI drivers from Global Provider of Innovative Graphics, Processors and Media Solutions | AMD (in the upper right corner of the page)
Use this procedure to install the DRIVER ONLY: ATI video cards - DRIVER ONLY installation procedure

If the device (AODDriver or AODDriver4.01) remains a problem, open Device Manager, select the "View" item.
Then select "Show hidden devices" and scroll down to the Non-Plug and Play Drivers section.
Locate the AODDriver entry, right click on it and select "Un-install". Reboot for changes to take affect.


Code:
Rt630x64.sys Fri Jun 21 11:29:10 2013 (51C41CE6)
Realtek PCI/PCIe Adapters
http://www.carrona.org/drivers/driver.php?id=Rt630x64.sys

asmtxhci.sys Fri Aug 16 21:28:42 2013 (520E7D6A)
Asmedia USB 3.0 driver
http://www.carrona.org/drivers/driver.php?id=asmtxhci.sys

asmthub3.sys Fri Aug 16 21:28:54 2013 (520E7D76)
ASMedia USB 3.0 Hub driver
http://www.carrona.org/drivers/driver.php?id=asmthub3.sys

RTKVHD64.sys Mon Oct 7 15:59:13 2013 (5252BE31)
Realtek High Definition Audio Function Driver
http://www.carrona.org/drivers/driver.php?id=... Read more

52 more replies
Relevance 54.94%

Its been over 2 days after an initial fix of my graphics and security scanner but I now am getting the BSOD error 0x000001D I have been playing tera for the past 2 days and I haven't experienced anything until today, I will be uploading my dump files below please help as soon as you can so this error can be ended once and for all

Answer:Another BSOD 0x000001e KMODE_EXCEPTION_NOT_HANDLED

My computer has crashed again, uploading new dump files. Also I noticed that this error occurred TWICE now when I tried to open my other game "Vindictus" Please help as soon as you can thank you all.

3 more replies
Relevance 54.94%

BSOD with above error code happening.

Report attached. Original topic can be found BSOD KMODE_Exception_Not_Handled (mv91xx.sys)

System specs are in my profile. Upgraded hard drive since my original post. Marvel driver is up to date as far as I can tell.

Thanks

Edit: New topic created here upon request.

Answer:BSOD KMODE_Exception_Not_Handled (mv91xx.sys)

The Marvell 91xx SATA 6G Controller is causing the BSODs.

Code:
BugCheck 1E, {ffffffff80000003, fffff801bf2d178e, 0, ffffe0011afc1560}

*** WARNING: Unable to verify timestamp for mv91xx.sys
*** ERROR: Module load completed but symbols could not be loaded for mv91xx.sys
Probably caused by : mv91xx.sys ( mv91xx+3178e )

Followup: MachineOwner
---------
Because they are too old.

Code:
Image name: mv91xx.sys
Browse all global symbols functions data
Timestamp: Fri Aug 27 15:19:22 2010
I would not suggest to update it, but would suggest to avoid Marvell; because those controllers are known to be unstable.

Open the computer. Look at your motherboard ..... where the SATA cables are connected to the board. These two navy blue ports are Marvell.

The two gray ports below those are Intel ports with equal specs; and the four light blue ports are sata 3GBPS ports, having a little less data speed.

Remove the SATA cables from those Navy blue ports. Connect those (you have two disks as I can see) to the gray ports.

Now see how it goes. Let us know.

0 more replies
Relevance 54.94%

Repeatedly experiencing the above BSOD. Started happening after upgrading from Windows 7 to 10. I initially thought I'd resolved it by downloading the latest Marvell driver but it appears the BSOD just didn't trigger for a week or two.

Would appreciate some help in trying to resolve. BSOD seems to happen mostly when downloading (from Steam for example).

Thanks

Answer:BSOD KMODE_Exception_Not_Handled (mv91xx.sys)

It seems to be caused by Marvell Storage Controller.
Open "Computer Management" > Select "Device Manager" > Expand "Storage Controllers"

You should see the Marvell’s controller, right-click on the “Marvell’s Controller *Something* ” > Click the "Details tab", scroll for Hardware ID, copy the shortest hardware ID, paste it in the search field in devid.info and download the newest driver you can find for the newest version of Windows. Run the driver install and reboot your system.

10 more replies