Computer Support Forum

BSOD please help codes inside!!!

Question: BSOD please help codes inside!!!

Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1


please help i am not to good with computers

Relevance 100%
Preferred Solution: BSOD please help codes inside!!!

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: BSOD please help codes inside!!!

Quote: Originally Posted by harlee123


Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
please help i am not to good with computers



We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

9 more replies
Relevance 72.57%

Hello,

I've been getting blue screens for a while now, but they started getting more frequent than usual these, BSOD include the following error codes:
KMODE_EXCEPTION_NOT_HANDLED What failed: Wdf01000.sysSYSTEM_THREAD_EXCEPTION_NOT_HANDLEDDRIVER IRQL NOT LESS OR EQUAL What failed: dxgmms2.sysPFN LIST CORRUPTSYSTEM SERVICE EXCEPTION What failed win32kfull.sysSYSTEM SERVICE EXCEPTIONSYSTEM THREAD EXCEPTION NOT HANDLED What failed: NETIO.SYSPAGE_FAULT_IN_NONPAGED_AREA What failed: FLTMGR.SYSATTEMPTED_WRITE_TO_READONLY_MEMORY What failed: usbehci.sysDRIVER_IRQL_NOT_LESS_OR_EQUAL What failed: ndis.sysUNEXPECTED_KERNEL_MODE_TRAPDRIVER_IRQL_NOT_LESS_OR_EQUAL What failed: Wdf01000.sys
I've tried getting in contact with the Microsoft support service but they were not able to help me.
These errors seem to happen almost randomly, sometimes while browsing the web and sometimes while playing games or doing nothing at all.

PC-18_08_2017__00112_17.zip

More replies
Relevance 50.02%

Hi Guys,
I am new to the forum,
My Pc started crashing recently after my old PSU(600w) busted and i replaced it(400w),The funny part about the bsod's is i get different codes each time....eg (d1 then a then 3b..etc) at first i thought it was maybe a virus... so I formatted The PC and then installed the latest drivers i could find for my PC...The results were only slightly different from the past (The computer would stay up a little longer before it crashed), I ran a memtest and RAM is fine, Then I thought it was my GPU overheating....So i cleaned the fans of both GPU and processor and Replaced the Old Thermal Compound.....Still no improvement... and here I am Now


My Specs:-
Motherboard:- Asustek P5Q Se
CPU:- Intel Core 2 Quad Q8300 Yorkfield
Socket :- LGA 775
GPU:- Nvidia GTX 460 2GB (ZOTAC)
RAM:- 2x2GB DDR2
HDD:-Seagate Barracuda 500gb

Answer:Random BSOD's while gaming and surfing web(BSOD Codes vary each time)

Code:
Host Name: TKMOHAMMED-PC
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7600 N/A Build 7600
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: TK Mohammed
Registered Organization:
Product ID: 00426-OEM-8992662-00497
Original Install Date: 4/17/2015, 1:19:57 AM
System Boot Time: 4/20/2015, 12:59:14 PM
System Manufacturer: System manufacturer
System Model: P5Q SE
Counterfeit installations such as yours contains heavily modified code that causes the installation to behave it unexpected ways. Analysing BSOD's and determining their causes on these sorts of installations is very unreliable.

My recommendation is to start with a clean slate, and install a genuine version of Windows. This will minimise the problems you are experiencing, and make subsequent diagnosis of BSOD's far more reliable.

1 more replies
Relevance 49.2%

My blue screens seem to happen when I am playing games, I have attached some logs and the zip file using the tool in the instructions. I have tried to upgrade my bios and my video card drivers without any luck. I would be grateful for any suggestions or help.
thanks,
Tim


windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:\Windows
Hardware: ASUSTeK COMPUTER INC., SABERTOOTH Z77
CPU: GenuineIntel Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz Intel586, level: 6
4 logical processors, active mask: 15
RAM: 17121755136 total


Crash Dump Analysis
</B>
Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.

On Mon 11/24/2014 6:14:39 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\112414-7784-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80003179181, 0xFFFFF88009D8D020, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identifi... Read more

Answer:BSOD troubles seem to be while playing games - different BsOD codes

Hello, tbrown26. I will try to help you with this.

None of your dump files were overly definitive, as usual. The first thing I would like you to do is fill out your system specs in detail. Sometimes we have to look up a component and Manufacturer and model number helps us to do that.
Please fill out your System Specs


   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.

If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs

After completing that please open a elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc a... Read more

7 more replies
Relevance 48.38%

Hello,

So first of all, I am not a computer wizard. Some terms I might not understand as i've never had a problem like this before, but i'll try to enlist as much information as possible.

Since last friday or so, i've suddenly encountered a BSOD. Now, i've had them before and it was only once. After a reboot it usually never happend again and everything was cool. But since friday, they popped up again. Mainly during playing Battlefield 1, but i've also had it happen during Dragon Ball: Xenoverse 2.

I've had multiple BSOD errors, which are:

- IRQL NOT LESS OR EQUAL
- BAD POOL HEADER
- MEMORY_MANAGEMENT
- SYSTEM_SERVICE_EXCEPTION
- APC_INDEX_MISMATCH

Now if it were one, I might've been able to pinpoint the issue, but.. They're constantly different errors that happen. Now, to explain a bit more in detail how it goes:

So i'm just playing a match of Battlefield 1. After 10/15 minutes give or take, it'll bring me to the blue screen. After processing whatever it has to process, computer shuts down and it starts to restart. At this point it will be stuck in an infinite restart loop, where my monitor will not display anything as well. It just says it's not connected to something, which it clearly is. After manually closing and rebooting, i'll have to do this a few times or mess with the HDMI a little bit before I get my monitor to pop up again. Once that happens, I get stuck in the beginning screen where you can see your HDD/SSD installed. It won't go further than that unless I ... Read more

Answer:BSOD playing games, so far 5 multiple BSOD errors, listed inside

Solved it after a long few days. Memtest never showed the RAM was broken, but my RAM seemed to be the issue nontheless. I solved it, thanks for the help.

1 more replies
Relevance 48.38%

Hello,

So first of all, I am not a computer wizard. Some terms I might not understand as i've never had a problem like this before, but i'll try to enlist as much information as possible.

Since last friday or so, i've suddenly encountered a BSOD. Now, i've had them before and it was only once. After a reboot it usually never happend again and everything was cool. But since friday, they popped up again. Mainly during playing Battlefield 1, but i've also had it happen during Dragon Ball: Xenoverse 2.

I've had multiple BSOD errors, which are:

- IRQL NOT LESS OR EQUAL
- BAD POOL HEADER
- MEMORY_MANAGEMENT
- SYSTEM_SERVICE_EXCEPTION
- APC_INDEX_MISMATCH

Now if it were one, I might've been able to pinpoint the issue, but.. They're constantly different errors that happen. Now, to explain a bit more in detail how it goes:

So i'm just playing a match of Battlefield 1. After 10/15 minutes give or take, it'll bring me to the blue screen. After processing whatever it has to process, computer shuts down and it starts to restart. At this point it will be stuck in an infinite restart loop, where my monitor will not display anything as well. It just says it's not connected to something, which it clearly is. After manually closing and rebooting, i'll have to do this a few times or mess with the HDMI a little bit before I get my monitor to pop up again. Once that happens, I get stuck in the beginning screen where you can see your HDD/SSD installed. It won't go further than that unless I ... Read more

More replies
Relevance 47.15%

I kept getting BSOD's with windows xp even after fresh installs so I decided to try windows 7 but i'm still getting them.

I also ran a memtest and it said my ram passed so I am at a loss as to what to do. I have attached two different minidumps cause they are different codes, any help would be appreciated.

Answer:I keep getting a BSOD with different codes..please help

Try updating this driver as a starting point:

Image path: \SystemRoot\system32\DRIVERS\ASACPI.sys
Image name: ASACPI.sys
Timestamp: Fri Aug 13 12:52:52 2004 (411C2D04)

9 more replies
Relevance 47.15%
Question: BSOD Codes

Gateway GT5628 is what my computer is- here's the link to the specs.
http://support.gateway.com/s/PC/R/1014737R/1014737Rnv.shtml

I kept getting bsod's. It'd send my computer into a booting up shutting down cycle where it wouldn't quite make it into vista before it'd shut down again. After a bit, I'd get to the screen where it lets me choose last known good configuration. So I'd choose it. And everything would be great for a little while (Anywhere from a day to a couple weeks), then it'd start this cycle again. The cycle is becoming more frequent, and I have no idea what's going bad on my computer. It has been suggested that it could be a failing PSU, memory, or hard drive. It has been suggested also that it may not be the mobo, since the other day while I was backing things up the DVDRW drive just stopped working while I was in the middle of backing things up (could the PSU not be distributing power equally?).

I tried using Everest Ultimate- the trial edition- the voltage on my cpu core was 1.3 V and maintained at that voltage. The temperatures continued to climb- reaching 69C and then guess what... spontaneous blue screen again. I don't know why it's getting so hot.. I have opened up the case, looked inside, and hardly any dust whatsoever.

Here are the codes that I finally managed to take a snapshot of.

STOP: 0x0000000D1 (0X8D778174, 0x00000002, 0x00000000, 0x8D650034)

I realize I have no clue what I'm talking ... Read more

Answer:BSOD Codes

16 more replies
Relevance 47.15%
Question: BSOD with codes

got this exact same message 2 days in a row with a physical memory dump included. computer just restarts and goes on about its business
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8006627050
BCP3: FFFFFA80066FD060
BCP4: FFFFFA80051FFAF0
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\Mini111010-01.dmp
C:\Users\Chris\AppData\Local\Temp\WER-90043-0.sysdata.xml
C:\Users\Chris\AppData\Local\Temp\WER3439.tmp.version.txt

Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
forgot to state that the error was a Driver Power State Failure

Answer:BSOD with codes

Let's try this.Download/install BlueScreenView, http://www.nirsoft.net/utils/blue_screen_view.html.Double-click BlueScreenView.exe file.When scanning is done, Edit/Select All...then File/Save Selected Items.Save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content and paste it into your next reply.Louis

5 more replies
Relevance 47.15%

I've had two BSOD's in one day: IRQL_NOT_LESS_OR_EQUAL and KMODE_EXCEPTION_NOT_HANDLED.
I don't overclock, but this system was considerably more reliable when I did (probably not because of the overclock).

I thought the problem occurred only when under load, since I compile a lot of software and transcode a lot of video, but I got the STOP: 0x0000000A while trying to register for these forums after the 1E, while CPU-Z was initializing and while the system was under minimal memory/CPU load.

I use an overkill Noctua NH-D15 CPU cooler, a Rosewill SilentNight 500W 80+ Platinum PSU, and I have my case wide open. My PSU is stable when running at 100% CPU+100% GPU, so I doubt it's having trouble providing stable power.

What could be causing these crashes?

More replies
Relevance 47.15%

I built this pc and Im getting lots of different bsod codes randomly.
I get some bsods when using Firefox and when I try to run Unigine Heaven 4.0 too.
Sometimes Unigine Heaven runs ok.
Mozilla Firefox also crashes constantly in Windows 10, but that is another story.

I have performed following verifications and I have not found the bug source

Memtest86 - 8 passes ok
Set memory XMP on and off
updated SDD firmware and motherboard firmware
Removed SDD Samsung 840 evo and installed windows to a HDD Seagate
Removed VGA and wifi cards.
Used 3 different SATA cables.
disables onboard network.
Changed voltages like Vio, Vsa, Vpch, VGA voltages in amd Wattman.
I ran intel Processor Diagnostic tool.
Uninstalled Intel onboard VGA drivers.

Windows starts correctly in normal and secure mode,
but in diagnostic mode it locks in logon screen with dot circles spinning.

I think my motherboard is faulty but Im not really sure.

Answer:Many different BSOD codes!

Problem Solved!
The problem was Vcore!

I had already tried many different voltage settings buts I couldnt see any difference.
Today I tried disable EIST and C1E and put voltage to "Override" and started increasing it then the system became stable!

I was not using overclock, and many different bios settings didn't make any result.
I dont know why only Override made the pc stable! I think the processor in Stock frequencies and bios in "Auto" sould make pc usable, but thats not the case here.

1 more replies
Relevance 47.15%

I've had two BSOD's in one day: IRQL_NOT_LESS_OR_EQUAL and KMODE_EXCEPTION_NOT_HANDLED.
I don't overclock, but this system was considerably more reliable when I did (probably not because of the overclock).

I thought the problem occurred only when under load, since I compile a lot of software and transcode a lot of video, but I got the STOP: 0x0000000A while trying to register for these forums after the 1E, while CPU-Z was initializing and while the system was under minimal memory/CPU load.

I use an overkill Noctua NH-D15 CPU cooler, a Rosewill SilentNight 500W 80+ Platinum PSU, and I have my case wide open. My PSU is stable when running at 100% CPU+100% GPU, so I doubt it's having trouble providing stable power.

What could be causing these crashes?

Answer:Two different BSOD codes in one day. :/

We have checked the dumps, but before we conclude as to the failing modules, please let us see your msinfo32.nfo file (as that one included in the zip is not giving the complete info).System Information File - Create in Windows 10 - Windows 10 Forums Thanks.

CPUz (or Speccy, both uses the same hardware reading driver) causes this BSOD, for sure. Updating it to the latest should solve the issue. The main concern is the VPN caused BSOD; we need to check a bit more about it.
___________________________________________________________________________

Code:
BugCheck A, {14f048, f, 1, fffff8032ca29197}

*** WARNING: Unable to verify timestamp for cpuz139_x64.sys
*** ERROR: Module load completed but symbols could not be loaded for cpuz139_x64.sys
Probably caused by : cpuz139_x64.sys ( cpuz139_x64+2084 )

Followup: MachineOwner
---------


Code:
BugCheck 1E, {ffffffffc0000005, fffff80248fbfc37, ffffd000232a30a8, ffffd000232a28c0}

*** WARNING: Unable to verify timestamp for acsock64.sys
*** ERROR: Module load completed but symbols could not be loaded for acsock64.sys
Probably caused by : acsock64.sys ( acsock64+b5a6 )

Followup: MachineOwner
---------------------------------------------------------------------------------
Image name: acsock64.sys
Timestamp: Tue Jan 24 21:37:18 2012 (4F1ED736)

4 more replies
Relevance 46.33%

Hi,

I put together a computer system myself a few months ago. Of course not my core business but I still wanted to try. So far so good but after a while i got a lot of BSOD messages which i can't understand.

I have run Memcheck86 for a while, it's not reporting a problem with my memory.

Could you guys help me out?

I'm running Windows 7 Home premium 64 bit.
Complete system setup in my profile.

I have attached the BSOD_docs.zip files

Thanks in advance.

Answer:Random BSOD codes??

Hi Kroese and welcome to the forum. Thank you for uploading the information. I looked at your four latest dumps. The blame memory corruption Windows system files, which are highly unlikely to be the real cause.

I suggest that you completely uninstall Norton using this removal tool: Tool. Norton is known to cause BSOD's on some Win 7 systems. Once you know your system is stable, you can try it again; but I do not recommend doing so. Download and install Microsoft Security Essentials in place of Norton. MSE runs very smoothly with Win 7.

I see that you are running Comodo firewall. Comodo generally runs pretty well with Win 7; but it is known to cause conflicts on some Win 7 systems. If you wish, you can leave for the time being and see how your system does.

You have some outdated drivers loaded on your system. Out of date drivers can cause conflicts, memory corruption and BSOD's. Those red font are quite obsolete. Update the following drivers using the links provided.





Quote:
AODDriver.sys Mon Oct 13 00:38:55 2008 - AMD Overdrive; also in EasyTune6 for Gigabyte motherboard. Drivers & Support | GAME.AMD.COM. Upgrade this software or uninstall it.

gdrv.sys Thu Mar 12 23:22:29 2009 - Gigabyte Easy Saver - mobo power utility driver. GIGABYTE - Support & Downloads - Downloads - Motherboard.

GVTDrv64.sys Tue Sep 05 03:10:02 2006 - Gigabyte EasyTune6 driver (known issues w/Win7). http://www.gigabyte.us/Support/Mothe...lity_List.aspx. Unistall E... Read more

9 more replies
Relevance 46.33%

Hello,

its been about 2 weeks now i'm looking for the problem of this but i can't seem to find any , i even posted on techspot.com , they tried a lot but no final solution.

the problem started when i changed my VGA from Geforce 8600 to Geforce 9400. i got BSOD playing games , surfing internet , working with office etc . the 9400 seemed very buggy and i thought it was a hardware problem , so i bought a Asus 250GTS just yesterday but the BSOD keep coming ( less than before) with error codes of 124 and 1e and 3b.

i noticed in this forum that you can tell what driver or application causes the crash , so i attached the dump files.

it would be really fantastic if you could help me.

Answer:BSOD with error codes 124 , 1e,3b

  
Quote: Originally Posted by danymogh


Hello,

its been about 2 weeks now i'm looking for the problem of this but i can't seem to find any , i even posted on techspot.com , they tried a lot but no final solution.

the problem started when i changed my VGA from Geforce 8600 to Geforce 9400. i got BSOD playing games , surfing internet , working with office etc . the 9400 seemed very buggy and i thought it was a hardware problem , so i bought a Asus 250GTS just yesterday but the BSOD keep coming ( less than before) with error codes of 124 and 1e and 3b.

i noticed in this forum that you can tell what driver or application causes the crash , so i attached the dump files.

it would be really fantastic if you could help me.


Well you have three basic problems. Memory, hardware, and system files

memory. download memtestx86, burn it to cd, and run it for at least 7 passes

Hardware-(may just be memory) use these instructions to find out what it means and what to try. http://www.sevenforums.com/crash-loc...-what-try.html

system files--run a system file check to verify and repair system files.
(type cmd in search>right click and run as admin>sfc /scannow)

let us know if you need help with these

Ken

Code:
BugCheck 1E, {ffffffffc0000005, fffff800032dcc36, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt!KiDispatchException+1b9 )
??????????????????????????????????????????????????????????????????????????????????????
B... Read more

4 more replies
Relevance 46.33%

I'm having a terrible time figuring out what is wrong with my pc. It has been put together for over a year now with upgrades every once in a while but recently I have been getting crashes, freezes and BSOD.

I've uploaded the minidump and report file. Thanks for any help.

Answer:BSOD with different error codes

Now my pc won't boot up any more, just a flashing underscore in the top left corner.

Any advice would be helpful, thanks.

1 more replies
Relevance 46.33%

Attached are the files.

thank you

Answer:BSOD - different codes come out each time

Hello Eric!

Please run the tool again and did you run it as an administrator or not? If you didn't that would explain the small size!

Cheers, Boris

2 more replies
Relevance 46.33%

i have been facing BSOD on my new hp dv6 6166tx from day one ..

oem windows 7 home premium 64 bit upgraded to ultimate 64 bit ...

hardware is new..
os is fresh factory installed

i have run standard memory test in system and via bios no errors found

however a sofware" hard drive regenerator" reports a hard drive delay in a sector ....

bsod error is very random and some times it appers after cold start ...
some times during browsing
some times it never happens .

Answer:BSOD very random with different codes

These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you... Read more

2 more replies
Relevance 46.33%

I recently put a new PSU and new RAM in my Windows 7 computer and I've been having continuous blue screens, random reboots, and hangs at boot on the BIOS screen.

Any help would be greatly appreciated.

System Specs:

Gigabyte 990FXA-UD3
AMD FX-8350
16GB Mushkin DDR3 1600
GeForce 9800 GT
FSP 750W PSU

More replies
Relevance 46.33%

Hello,

my computer crashes on me every hour or so, whether I do anything or not. First programs freeze, then Skype shuts down, then music stops playing and BSOD appears. It began two days ago and I have no idea why. Only thing that could do anything with this is that I used program WiNToBootic to make USB flashdisc with Windows on it. Otherwise I didn't install anything and did nothing with the HW.
Incidentally, my friend started having hourly BSODs four or five days ago - he gets only code 7a though. He thinks that it causes something that our computers have in common, but nothing we did worked so far. He even tried recovering Windows to two weeks ago.

I don't post any minidump info or SF Diag info because I don't have one. My computer is set so it should minidump on BSOD, both via registry file downloaded from this tutorial and via manually setting it, but when BSOD appears the lines "collecting data for crash dump" or something like that never finish. It just doesn't write any info for some reason. BlueScreenView doesn't even show BSOD appeared. Minidump folder is empty.

I tried Memtest86+ for 8 passes, no problem.
I tried Seatools for both Short Generic and Long Generic tests on my system HDD, no problem.
I tried TDSSKiller, no problem.
My AVG says no viruses are on my computer.
I tried Windows Defender Offline, but it either freezes or doesn't finish. It detects something though, just doesn't show me what that is. Test never completes and nothing appears in ... Read more

Answer:BSOD's every hour, codes 7A, F4 and B3

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

7 more replies
Relevance 46.33%

My pc gives me daily bsod's with sometimes an 'a' code or 'b1' and more. Tried system repair etc, didn't work.

? Windows 7
? x64
? None/Windows 7
? retail version
? Age of system: 7 months
? Age of OS installation: 2 weeks - have you re-installed the OS: several times

? CPU: Intel i5-3570
? Video Card: MSI HD7850 Twin Frozr III OC 2GB
? MotherBoard: Gigabyte GA-H77-DS3H
? Power Supply: XFX PRO550W

BlueScreenView says: ntoskrnl.exe and sometimes netbt.sys or afd.sys are to blame.

Help is much appreciated!

Answer:multiple bsod codes

Tried driver verifier, got a blue/white screen with no text on it even before anything happens (only the motherlogo shows up first). There was no minidump of it.

2 more replies
Relevance 46.33%

Hello people of Sevenforums,
first im new here, so hello!
second, im sorry if the thread title isn't right :$

Next, i just got my new pc about a week ago. It has more than one problem, most ain't really a problem. But the BSOD's are so annoying..

Sometimes it runs straight for 10hours, sometimes is gives me a BSOD after 10mins.

I saw BSOD's with:
0x3b
0x1d
something with.. dxgamm1.sys

Sometimes it occurs when playing games, sometimes when browsing, sometimes just when doing nothing...

First i want to say im pretty sure it ISN'T a driver issue. It allready happened first time booting windows... didn't even install anything! And i allready updated ALL drivers.. it just keeps coming randomly..

Specs:
ASRock M3A770DE Motherboard
AMD Phenom II X6 SixCore Processor 2.80Ghz @ 3.30Ghz
ATI Radeon HD5450
4GB RAM (Team)
1TB HDD (SeaGate)
Running Windows 7 Home Premium 64bit.

It scares me a little that it happened just when i installed windows, 10seconds after i booted it it allready BSOD'd...

I don't know if it has something to do with it, but in the morning, when i wakeup, i have to let my PC run for 5/10mins to get warm. After that i can reboot it and it starts, if i just start it it DOESN'T detect my CDROM Drive/HDD.

Also, i'm sorry for my bad english. I'm only 14 and dutch ;p

Thanks in advance!

Answer:Random BSOD's all different codes (New pc)

  
Quote: Originally Posted by RapidDream


Hello people of Sevenforums,
first im new here, so hello!
second, im sorry if the thread title isn't right :$

Next, i just got my new pc about a week ago. It has more than one problem, most ain't really a problem. But the BSOD's are so annoying..

Sometimes it runs straight for 10hours, sometimes is gives me a BSOD after 10mins.

I saw BSOD's with:
0x3b
0x1d
something with.. dxgamm1.sys

Sometimes it occurs when playing games, sometimes when browsing, sometimes just when doing nothing...

First i want to say im pretty sure it ISN'T a driver issue. It allready happened first time booting windows... didn't even install anything! And i allready updated ALL drivers.. it just keeps coming randomly..

Specs:
ASRock M3A770DE Motherboard
AMD Phenom II X6 SixCore Processor 2.80Ghz @ 3.30Ghz
ATI Radeon HD5450
4GB RAM (Team)
1TB HDD (SeaGate)
Running Windows 7 Home Premium 64bit.

It scares me a little that it happened just when i installed windows, 10seconds after i booted it it allready BSOD'd...

I don't know if it has something to do with it, but in the morning, when i wakeup, i have to let my PC run for 5/10mins to get warm. After that i can reboot it and it starts, if i just start it it DOESN'T detect my CDROM Drive/HDD.

Also, i'm sorry for my bad english. I'm only 14 and dutch ;p

Thanks in advance!


We do need the DMP file as it contains the only record of the sequence of events leading up to... Read more

4 more replies
Relevance 46.33%

well just a few mins ago i went into the asus updater for the bios update to see if it has any new updates and i got a bsod this is what the error gave me..

Problem report summary

Problem type


Windows stop error (a message appears on a blue screen with error code information)

Solution available?


No

What does this problem mean?


Windows has encountered a problem it cannot recover from and it needs to be restarted

Cause


Unknown

Computer symptoms


A message appears on a blue screen with error code information (for example: 0x0000001E, KMODE_EXCEPTION_NOT_HANDLED)


any help will be great thanks
 

More replies
Relevance 46.33%

So, for about a year I've had my system overclocked I've been reverting my overclocks since I've been running into issues while playing Battlefield 3. With my system at stock settings I'm still getting blue screens. I noticed my pagefile is about 8 gb (could that be a problem?) anyways, attached are the dump files in one zip file, all and any input is greatly appreciated

Answer:BSOD while running BF3, many different codes

Hi SubtleNachos.

Logitech SetPoint Unifying KMDF USB Filter driver. Those are failing.

Code:
fffff880`030afe48 fffff880`06835010Unable to load image \SystemRoot\system32\DRIVERS\LHidFilt.Sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for LHidFilt.Sys
*** ERROR: Module load completed but symbols could not be loaded for LHidFilt.Sys
LHidFilt+0xc010
-----------------------------------------------------------------------------------------
fffff880`030b0058 fffff880`06801c01Unable to load image \SystemRoot\system32\DRIVERS\LEqdUsb.Sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for LEqdUsb.Sys
*** ERROR: Module load completed but symbols could not be loaded for LEqdUsb.Sys
LEqdUsb+0x1c01
And the drivers are old.

Code:
fffff880`06bb5000 fffff880`06bcc000 LEqdUsb (deferred)
Image path: \SystemRoot\system32\DRIVERS\LEqdUsb.Sys
Image name: LEqdUsb.Sys
Timestamp: Fri Sep 02 11:52:56 2011 (4E607640)
CheckSum: 0001C3A8
ImageSize: 00017000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update your Logitech devices drivers from http://www.logitech.com/en-us/support.

The display driver is causing continuous issue there. Uninstall the current installed one using AMD Catalyst Un-install Utility and then try catalyst 13.4 WHQL, as it is known to be stable.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Is the computer hot? Report u... Read more

1 more replies
Relevance 46.33%

Just wondered if anyone has ever seen this before, and what it might mean. Just got a new computer (W8.1), and third time I turned it on: BSOD but w/ no error codes, nothing. It wouldn't boot no matter what. Then tried f8 and it booted to the desktop but nothing would open.
Couple more restarts and it "seems" to work fine now, but does that blue screen indicate real hardware problems / more crap in the future?  I wish I'd just sent the damn thing back, but since it's now starting up....Any diagnostic recommendations you'd suggest at this point?  I saved a system image on an ex HD before doing anything, so there's that if nothing else...
thanks for any advice you give.   

More replies
Relevance 46.33%
Question: Strange BSOD codes

OK these have me baffled and I cant seem to find anyone else who has seen these.

This is a XP Pro machine fully up to date (SP3) with 3gb of memory running an ATi card with 3 monitors supported.

It happens very seldomly but is getting more and more frequent.

Code pulled from Event Viewer-
Error code 000000c2, parameter1 00000007, parameter2 00000cd4,
parameter3 02220001, parameter4 89159ef8

Every time it occurs the last two might change slightly.

I am decent with networking but at a loss on how to truly debug this correctly.

Any help would be greatly appreciated.

More replies
Relevance 46.33%

Hi all,
I've been getting these wicked crashes. It seems to happen while I'm into a game (online game or otherwise).

The error codes are:
PAGE_FAULT_IN_NONPAGED_AREA
BAD_POOL_HEADER
IRQL_LESS_OR_NOT_EQUAL

The prompts seem to suggest that it may be a new hardware addition, but I've not installed any new hardware except an analog microphone since I built this computer three months ago. It has been working fine for three months. I'm reasonable uncomfortable with my overall computer proficiency with regard to making a guess about a possible course of action. I don't want to mess it up further. I've seen other threads on this topic but none where all of these error codes arose.

The components are new and have worked fine for as long as I've had them.

Any help would be very much appreciated.

Answer:BSOD with 3 different error codes

  
Quote: Originally Posted by Asper Aequitas


Hi all,
I've been getting these wicked crashes. It seems to happen while I'm into a game (online game or otherwise).

The error codes are:
PAGE_FAULT_IN_NONPAGED_AREA
BAD_POOL_HEADER
IRQL_LESS_OR_NOT_EQUAL

The prompts seem to suggest that it may be a new hardware addition, but I've not installed any new hardware except an analog microphone since I built this computer three months ago. It has been working fine for three months. I'm reasonable uncomfortable with my overall computer proficiency with regard to making a guess about a possible course of action. I don't want to mess it up further. I've seen other threads on this topic but none where all of these error codes arose.

The components are new and have worked fine for as long as I've had them.

Any help would be very much appreciated.


We actually need the real DMP file. Can you upload them to us?

thanks

Ken

2 more replies
Relevance 46.33%

Hi,have my computer for around 4 months now and lately i've been getting these BSOD's and kind of annoying seeing as I work from home and as you can tell I don't get alot of work done these days due to this,this thread is my final solution before I have to go spending some money on a fix..but i think its down to my ATI Radeon 5700 Graphics card becuase im in the 0.05 % of people who get their 'grey screening' issue..anyways the stop codes have been various

Stop 0x0000004e
Stop 0x0000003b
Stop 0x0000001a
Stop 0x00000024
Stop 0x00000050

It won't let me upload my minidump files it keeps saying I don't have permission,but im the only user on the computer.

Please!! someone help me!!

Answer:BSOD (Various stop codes)

  
Quote: Originally Posted by patrickmorris


Hi,have my computer for around 4 months now and lately i've been getting these BSOD's and kind of annoying seeing as I work from home and as you can tell I don't get alot of work done these days due to this,this thread is my final solution before I have to go spending some money on a fix..but i think its down to my ATI Radeon 5700 Graphics card becuase im in the 0.05 % of people who get their 'grey screening' issue..anyways the stop codes have been various

Stop 0x0000004e
Stop 0x0000003b
Stop 0x0000001a
Stop 0x00000024
Stop 0x00000050

It won't let me upload my minidump files it keeps saying I don't have permission,but im the only user on the computer.

Please!! someone help me!!


Hello Welcome to SF,

Follow this article and take ownership of those files Take Ownership Shortcut

Hope this helps,
Captain

9 more replies
Relevance 46.33%

Hi all,

Had three BSOD's the last week.

The first two happend on the same day and seemed to be related to harddisk drivers. I have recently installed a Seagate Central NAS, and Seagate Dashboard, the software for that, was upgraded a few days before the first BSOD.

I have not ran the software after the two BSOD and seemsed fine till today when a third one happened, which seems to be related to avast antivirus. I have updated avast, i was apparently running an old version.

I'm not sure if the three are related? Maybe there is another reason why these happened? Any ideas? tips? My logfiles are in attachement.

regards,
mv

Answer:three BSOD's with different error codes

Code:
BugCheck 1000008E, {c0000005, 84894415, 9e677bf4, 0}

*** WARNING: Unable to verify timestamp for aswSP.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSP.SYS
Probably caused by : aswSP.SYS ( aswSP+20526 )

Followup: MachineOwner
---------

Code:
BugCheck D1, {ffffffe3, 2, 0, 8ce5d1e4}

Unable to load image \SystemRoot\system32\DRIVERS\iaStor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStor.sys
*** WARNING: Unable to verify timestamp for hpdskflt.sys
*** ERROR: Module load completed but symbols could not be loaded for hpdskflt.sys
Probably caused by : iaStor.sys ( iaStor+3d1e4 )

Followup: MachineOwner
---------

Code:
BugCheck D1, {4, 2, 1, 8ce57362}

Unable to load image \SystemRoot\system32\DRIVERS\iaStor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStor.sys
Probably caused by : iaStor.sys ( iaStor+3d362 )

Followup: MachineOwner
---------
Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download, install and update those, and then run full system scans with both of them, one by one.

HP Mobile Data Protection is also a bad stuff. I'd recommend you to Clean Up Factory Bloatware, with a special reference... Read more

3 more replies
Relevance 46.33%

the issue has been happening for a few weeks now on near a daily business 90% of the time it has been BAD_POOL_HEADER BSOD but have now had a few SYSTEM_SERVICE_EXCEPTION BSOD it dosent seem to be tied to me doing anything as it has happened when the system has been idling but a few of the BSOD have happened just as soon as I do something with steam such as open/close a game close a chat window or closing steam itself would have had more minidump files to upload but noticed start of this week that windows was overwriting them. any help/advice you can give would be fantastic

Answer:BSOD various error codes

Avast has been flagged multiple times as causing problems.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff8000329ace5, fffff880055e7cc0, 0}

*** WARNING: Unable to verify timestamp for aswTdi.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswTdi.SYS
Probably caused by : tdx.sys ( tdx!TdxQueryInformationTransportAddress+3a )

Code:
fffff880`0bbf61c8 fffff880`0690f795Unable to load image aswSnx.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.SYS
aswSnx+0x28795
Uninstall Avast and install MS Security Essentials and MalwareBytes.



   Note
Make sure you uncheck the 'Enable Free Trial' box when installing.


Your nVidia driver is also causing problems.


Code:
*******************************************************************************
* *
* Bugcheck Analysis ... Read more

4 more replies
Relevance 46.33%

Hey guys!
I'm getting artifacting (I'm guessing that's the correct term, see pic) followed by a BSOD when I am playing a game. The BSOD codes are always different, as are the minidumps. Sometimes I don't get a BSOD, the computer screen goes black and I get an error about being unable to recover the display driver, or I just get a frozen screen with repeating sound.

I had about 11 minidumps at one point, but re-installed windows so now there are only 3 collected. Sometimes I can play the game for hours without a BSOD, other times just 10 minutes.

A picture of the "artifact" and system diagnostic collection (As per the forums instructions) are attached.

Things I have tried:
Ran Memtest86 overnight (Tests passed)
Removed 4GB of Memory
Monitored tempertures on the NB, CPU, and GPU (All ok, video card gets a bit hot sometimes in my opinion, 75 max, but it can run like this for hours without a BSOD, sometimes I get the BSOD at 55 degrees.)
Updated all of the BIOS and drivers I could find for my system. (Including Modem, Graphics, Mobo, and Nforce storage)
Clean install of Windows as of 4 days ago.

My specs:Windows 7 Professional x64 Retail
550w PSU
ATI HD 5850
4GB RAM (Was 8)
EVGA 780i Mobo
All about a year and a half old, the graphics card is about 6 months old.

Answer:BSOD - Same symptoms, different codes

I see you've only uploaded the dumps. We need the full report. Follow the instructions from the link below.
http://www.sevenforums.com/crashes-d...tructions.html

Your last BSOD was caused by your video card failing and it attempted to correct itself but was not able to, hence the crash.
Please download the latest ATI drivers from here. Reboot into safe mode, go into device manager and uninstall your video card drivers and then reinstall using the drivers you just downloaded.


Code:
nvstor.sys Fri Mar 19 16:45:11 2010 (4BA3E257)
nvstor64.sys Tue Aug 04 20:31:07 2009 (4A78D2CB)
Download the latest nVidia chipset drivers from here



Summary of the dumps

Code:
Built by: 7601.17514.x86fre.win7sp1_rtm.101119-1850
Debug session time: Sun Mar 27 04:24:15.811 2011 (UTC - 4:00)
System Uptime: 1 days 9:35:21.278
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+73bc )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x116
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x116_IMAGE_atikmpag.sys
BaseBoardManufacturer = EVGA
BaseBoardProduct = 132-CK-NF78
????????????????????????????????????????????????????????????????????????????????
Built by: 7601.17514.x86fre.win7sp1_rtm.101119-1850
Debug session time: Sun Mar 27 18:54:09.357 2011 (UTC - 4:00)
System Uptime: 0 days 14:28:58.949
Probably caused by : ntkrnlmp.exe... Read more

9 more replies
Relevance 46.33%

My chemistry teacher has a computer in her room that is driving me crazy. I started out trying to fix it. I thought it was going to be an easy BSoD fix so I tried restarting it and it started beep coding.
I know close to nothing about beep codes so I need a little help. Truthfully I am not too sure if it is a beep code, It is more like a buzzer.

Computer - Dell
Processor - not sure, guessing intel pentium 4 (the kids at my school like to rip off stickers, and I can't get into bios)
Beep code - _ _ . . pause _ .
 

Answer:Wit's end, BSoD & beep codes

12 more replies
Relevance 46.33%

Hi All
I've been having random BSODs since Saturday and am clueless. I can run fine in safe mode. The first thing I did was to restore the system to before Friday, and it didn't help. I have fixed the registry with registry mechanic, run Avast and removed the one thing it found, run spybot and removed those as well. I did the startup diagnostic and it passes and says that the system is fine to start up. I updated my video driver. I ran the memory diagnostic through 7 passes, no problems detected (yay?). I did the pfcscan (could not fix 2 errors- tcpmon.ini and autochk.exe) and also chkdsk /f/r (which got to 55% and then froze completely- after running for 4 hours).

The problem started right after I downloaded a game pack (a platinum pack I purchased from Playrix). Maybe I was trying to do too much? While 1 was downloading, I would install another, so I had a bunch of windows open when the first crash happened. So, I removed/uninstalled all of them. It seemed fine, so I started downloading them one by one with a little 'rest' in between to see if I could pinpoint which game was the prob. Nothing happened until after the last one. So, I restored the system again. I went to redownload, but instead of clicking 'run', I saved each one's setup file to the HD, but it crashed before I could install any of them. I then moved all the setup files to the other partition on the HD, restored the system again but still have crashes. Most often it's the IRQL, but I've had others as well.
... Read more

Answer:bsod- 2 different error codes

Hello fsutrill,
Here are the results of your bugchecks.
As you can see its a mixed bag, a bit of everything in there.
I hope your ready for some serious diagnostic work.

STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL
Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility

STOP 0x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED
Usual causes: Insufficient disk space, Device driver, Video card, BIOS, Breakpoint in startup without having a debugger attached, Hardware incompatibility, Faulty system service, 3rd party remote control, Memory

STOP 0x0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Usual causes: Insufficient disk space, Device driver, Video card, BIOS, Breakpoint with no debugger attached, Hardware incompatibility, Faulty system service, Memory, 3rd party remote control,

STOP 0x00000096: INVALID_WORK_QUEUE_ITEM
Usual causes: Device driver.


Probably caused by,
ntkrpamp.exe
aswSP.SYS
Ntfs.sys

First, do you have all Windows updates and service packs installed ?.

Un-install your AV, Avast is mentioned in one bugcheck. "Microsoft Security Essentials" is good to use, but download and install after this has been fixed. (don't forget).

Memory is mentioned in a few of the bugchecks, so download Memtest and run overnight, about six or seven passes.

If you have anything overclocked, set it to default, for now.

You will need to run driver verifier, follow this tutorial.

How to identify a buggy device dr... Read more

8 more replies
Relevance 46.33%

Hi,

I have been getting a BSOD with different error codes nearly every day since I received my laptop.

I have run the dell BIOS hardware diagnostics, which found no errors.
Updated all the drivers to the latest ones on the dell website. Still received BSOD.
Updated the network driver to the latest one on from the Realtek website. Still received BSOD.

Every time I ran a full virus scan with McAfee I received a BSOD. I therefore removed McAfee and installed AVG. I can run a full scan with AVG without getting a BSOD however I still receive BSOD on other occasions.

Some of the bug checks I get are
0x000000E3
0x00000018
0x0000003B
0x00000139
0x1000007E

Please can you help?

Thank you.

Answer:BSOD nearly every day with different error codes

I have taken a look at the most recent crashes.

Please follow these instructions for removing McAfee

Code:
*** WARNING: Unable to verify timestamp for mfehidk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys

*** WARNING: Unable to verify timestamp for mfeavfk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfeavfk.sys


Please update your Nvidia drivers and read this Nvidia thread for a possible solution for BSOD's.

Code:
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys


Please scan your pc for viruses and malware with windows defender and Malwarebytes.

Please read driver verifier | Sysnative
Please make a backup of your important files and get your rescue media or create one.Please create a restore point.

Some windows drivers are blamed, but that usually means that a 3rd party driver is actually the cause.
In order to get the driver, we need to stress it out, done via driver verifier. If driver verifier finds a violation the pc will crash.

If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

2 more replies
Relevance 46.33%

Windows 7 Home Premium 64bit
Full Retail
Built the system last summer, but the OS was installed about a month ago with Service Pack 1.

BSODs occur every few days. I suspend to memory often and the computer will BSOD when waking sometimes -- though this is usually not a BLUE screen, rather a RED/PINK screen, not sure what that means.

Specs:
Gigabyte X58A-UD3R
Intel i7 930
6GB Corsair DDR3 1600 kit (CMP6GX3M3A1600C7)
WD1002FAEX 1TB SATA3 drive
ATI Radeon HD 5670 video card

I've tried tweaking advanced DRAM settings in the BIOS in attempt to stop the BSODs with no success.

Answer:BSOD - various stop codes

  
Quote: Originally Posted by agroman


Windows 7 Home Premium 64bit
Full Retail
Built the system last summer, but the OS was installed about a month ago with Service Pack 1.

BSODs occur every few days. I suspend to memory often and the computer will BSOD when waking sometimes -- though this is usually not a BLUE screen, rather a RED/PINK screen, not sure what that means.

Specs:
Gigabyte X58A-UD3R
Intel i7 930
6GB Corsair DDR3 1600 kit (CMP6GX3M3A1600C7)
WD1002FAEX 1TB SATA3 drive
ATI Radeon HD 5670 video card

I've tried tweaking advanced DRAM settings in the BIOS in attempt to stop the BSODs with no success.


Virtually all of these were caused by memory corruption. Either the memory or a driver.

I would run memtest to verify your memory

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.
I would also run driver verifier to identify which driver is the culprit.






Quote:
I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair ... Read more

2 more replies
Relevance 46.33%

Hi,

Looking for some help/info/support as almost a last resort before I start replacing hardware, and with a Win8 upgrade on the way.

The PC is now approaching 4 years old. It had intermittent crashes from long ago, back then never whilst gaming, mostly during desktop activity, idle, watching streaming video, streaming music. This was usually characterised by scrambled screen and sound when it locked up.

Recently things have got worse, in that BSODs and crashes without "proper" BSODs displaying are much much more common. Also they happen at any time, whilst idle, web browsing, and now gaming.
I can still sometimes play for hours with no issues, leave Boinc running for hours, and then it will crash browsing the web sometime after all that. A couple of days go by with no issues, and then craziness.

I have in the past run memtest and found no errors though I realise this is not conclusive. Temps all seem to be ok, even with demanding gaming, full on Boinc and furmark, prime95.

I reinstalled Win7 a couple of years ago, and that did make a big difference for a while, although the issues have obviously not gone away. When it got a lot worse recently, I switched the memory sticks to the other slots on the mobo. No help.

Extra fun: Sometimes now the System will also neither post nor boot, power on, fans running, but no display and no progress even to post.
A couple of times it has claimed that the BIOS is knackered (bad BIOS checksum) but then after power off and rest... Read more

Answer:BSOD with various error codes

Hello Tuamtuam.

Try to update the firmware of your Samsung PM800 64 GB Internal SSD (SAMSUNG MMCRE64G5MXP-0VB).

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Comodo and Avast are contributing to your BSODs, directly.

Code:
fffff880`03184c08 fffff880`02c2f5b2Unable to load image \SystemRoot\System32\DRIVERS\cmdguard.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for cmdguard.sys
*** ERROR: Module load completed but symbols could not be loaded for cmdguard.sys
cmdguard+0x2f5b2
Description here: Driver Reference Table - cmdguard.sys

Code:
fffff880`03184bd8 fffff880`0192892eUnable to load image \??\C:\Windows\system32\drivers\aswMonFlt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswMonFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for aswMonFlt.sys
aswMonFlt+0x2192e
Description here: Driver Reference Table - aswMonFlt.sys

Uninstall Comodo. Uninstall Avast too, using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Let us know the results Also let us know the wattage of your PSU.
___________________________... Read more

9 more replies
Relevance 46.33%
Question: (BSOD) STOP CODES

It started slowing down  weeks ago. For the past week started incuring (blue screen) stop code. Sometime during start-up; and sometimes while in use. Not sure whether to take it to a shop, or if possible to deal with it at home.

More replies
Relevance 46.33%

Hi,

I'm hoping someone can help me with an almost daily problem i'm getting with blue screens. Examples of the resulting event viewer error codes:

Error code 1000008e, parameter1 c0000005, parameter2 bf819e5c, parameter3 f47447f4, parameter4 00000000.

Error code 1000007e, parameter1 c0000005, parameter2 8056a69c, parameter3 f7c5ec4c, parameter4 f7c5e948.

Error code 1000000a, parameter1 0008000c, parameter2 00000002, parameter3 00000000, parameter4 804dc406.

Error code 1000007e, parameter1 c0000005, parameter2 8056a69c, parameter3 f7c5ec4c, parameter4 f7c5e948.

Error code 1000008e, parameter1 c000001d, parameter2 80563e5a, parameter3 ba9b0c78, parameter4 00000000.

Error code 1000007e, parameter1 c0000005, parameter2 8056a69c, parameter3 f7c66c4c, parameter4 f7c66948.

Error code 1000008e, parameter1 c0000005, parameter2 bfc78eed, parameter3 f2121d00, parameter4 00000000.

Error code 1000008e, parameter1 c0000005, parameter2 00000070, parameter3 f51b6a24, parameter4 00000000.

Error code 1000008e, parameter1 c0000005, parameter2 80578a78, parameter3 ef010af0, parameter4 00000000.

As you can see "8e" seems to be a firm favourite. Does anyone know if it's a driver problem or maybe a hardware problem (RAM)??

The blue screens don't usually make reference to any particular files, so i haven't a clue where to start investigating.

Any help would be greatly appreciated as it's beginning to really get me down... Read more

Answer:7E & 8E Error Codes With BSOD

usually indicative of hardware failiure. Run memtest86+ from a floppy.
 

11 more replies
Relevance 46.33%

BSOD's started on a clients computer over a week ago and have been happening daily.

So far I've tried:
uninstalling/reinstalling antivirus (MSE), turning off Windows Defender
uninstalled old Norton av using cleanup tool
updated drivers mobo/vid card/sound drivers
checked RAM with memtest, hard drives with chkdsk and SMART (fine)

still can't figure this one out

The most recent crash happened when I ran a full scan using MSE av

Computer is a prebuilt HP
AMD X2 6000+ 3Ghz
3GB RAM
Windows 7 32-bit -upgraded from Vista so it's not a clean install

TIA!

TIA!

Answer:BSOD - various error codes, various causes

having the same problem still -- same code so I wont repost the zip files Tried flashing bios (worked fine) Ran av in safe mode (fine) Halp?

5 more replies
Relevance 46.33%

Hello ! Sorry for my english, i'm french.
I post here because i think this is the only forum can help me...
My situation : I have a configuration with 16Gb of RAM but I have some BSOD with 16Gb when i play games or when i watch videos on netflix or youtube or simply when i browse internet..
But when I use 8Gb (i remove 2 sticks) i don't have BSOD, no matter which stick i use they disappears !
I did some memtest but i did'nt have erorrs .. I don't know what can I do..
Oh and before i switch for windows 10 i already had these bsod with windows 7 but i'm not sure if i have the dump, if you need it i will searching them !
I hope you can help me, thanks !
Seram.
Attachment 29567

Answer:BSOD with 16Gb ram but not with 8Gb different codes

Attachment 29871

New bsod, i post the log

1 more replies
Relevance 46.33%

You would think that someone, somewhere would have put together this list. But the search "Windows 7 64 bit stop code list" produces page after page of links for a specific stop code, but not the one I had to look up.

Actually my system just BSOD's 3X in a row. It's usually quite stable. So after I find that list, I will probably be wanting some tools to "interpret" the dumps. Any suggestions here?

Thanks.
 

Answer:list of BSOD codes?

x509 said:


...

Actually my system just BSOD's 3X in a row. It's usually quite stable. So after I find that list, I will probably be wanting some tools to "interpret" the dumps. Any suggestions here?

Thanks.Click to expand...

Hi, x509,

Do a search on user Tawnos and check threads relating to BSODs and you will find numerous posts where he gives step-by-step instruction on what to do.

Hope this helps.

Chuklr

EDIT: check this thread for instructions: http://hardforum.com/showthread.php?t=1567184
 

10 more replies
Relevance 46.33%

Hi,
i have a fresh Windows 7 Ultimate x64 retail installation running on a new pc.
The hardware is completely new.
The system is running fine in safe mode but comes up with different BSOD every 15 minutes or so in normal mode.
I think this has something to do with the grafics driver, the problem startet right after the installation but persisted after I deinstalled them again (incl. manually deleting nvlddmkm.sys).
also someimes windows processes terminate with some random errors some minutes before the next BSOD appears.
grafic card: NVdia 480GTX
mainboard: Asrock P43DE
CPU: Intel E6700

hopefully someone can help me
Atomtomate

Answer:BSOD different error codes

  
Quote: Originally Posted by Atomtomate


Hi,
i have a fresh Windows 7 Ultimate x64 retail installation running on a new pc.
The hardware is completely new.
The system is running fine in safe mode but comes up with different BSOD every 15 minutes or so in normal mode.
I think this has something to do with the grafics driver, the problem startet right after the installation but persisted after I deinstalled them again (incl. manually deleting nvlddmkm.sys).
also someimes windows processes terminate with some random errors some minutes before the next BSOD appears.
grafic card: NVdia 480GTX
mainboard: Asrock P43DE
CPU: Intel E6700

hopefully someone can help me
Atomtomate



Memory exception caused by hardware.

1-run memtest to test your memory

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.
Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot. Test the sticks individually, and if you find a good one, test it in all slots.

2-hardware read here

Your .dmp file shows a stop error of 0x124 which is a general hardware error .. A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the pr... Read more

7 more replies
Relevance 46.33%

Hey all!

I often see BSOD when handling computers for repair work and quite often its a similar problem but now and again i get an error code i dont know. While there are MANY error codes that Microsoft uses for XP VISTA and Windows 7 there are quite a few that seem more common than others. Below you can find some more of the more common error codes that are used for XP. While this list is not exhaustive and the resolutions may not solve your problem hopefully it will help you some of the way to working out what may be wrong.

Windows XP Blue Screen of Death STOP Codes


When Windows XP detects a problem from which it cannot recover, it displays Stop messages. These are text-mode error messages that report information about the condition.

Stop messages, sometimes referred to as blue screens (BSoD), contain specific information that can help you diagnose and possibly resolve the problem detected by the Windows kernel.

This list describes these messages and helps you understand and interpret them.

This list is NOT exhaustive or meant to resolve EVERY error.
This list of messages is a guide to individual messages and their possible causes and resolutions... Having a basic understanding of these error messages enables you to communicate with your technical support professional more effectively too.

With all these Stop messages, you can pretty much assume someone else has encountered the problem before you. That is why tying in the error message into www.g... Read more

More replies
Relevance 46.33%

I have a feeling that this is all some how hardware related but I cant figure out which piece is causing it. I'm currently running 3 - 2GB Sticks of PC2-6400 which are all sorts of mismatched. I'm running an Radeon 5450HD 1GB Card with a Biostar TA790GX (AM2+) with a 9950 AMD Quad Core. Attached is the minidumps and what I could bring to life out of perfmon (in safe mode it wouldn't let me run the /report command so I just saved all user and system reports) I updated Bios updated the LAN driver after I did this report and Audio driver (realtek). This installation of Windows 7 was installed about 5 days ago and have been having these problems since I switched boards and CPU. (Did the re-install after I installed the new hardware because the original version of Windows 7 I had installed would not boot with the new hardware). I received an error while in safe mode that also intrigued me saying that I needed to update my graphics card or driver to something that was DirectX 3D compatible. Which I found weird. Any help is appreciated guys.

Answer:Multiple BSOD Codes

A day has gone by, and no one at all has said anything?

6 more replies
Relevance 45.92%

Hello, I got this BSOD for the first time today. I would like to have a help on how to resolve this issue. Kindly help.

Answer:BSOD with unknown error codes

Can I see the .dmp files of your crash? The picture doesn't explain much.

9 more replies
Relevance 45.92%

I got a BSOD a few months ago and had to reinstall Win 7 (and then upgrade to Win 10). During the process, the network settings got fowled up, but I?ve since fixed all of that. PC was stable for a few of months but now I get the BSOD all the time and it gives different error codes each time. I?ve removed all USB but the KB and mouse. Removed, swapped and tested (MemTest86) the memory. Still doing it.Updated all drivers and BIOS.My main drive is a SSD - It seems to be running ok. My other drive is an SATA so unplugger it, but still the same.Any ideas?Here is the dmp file.Thanks Jamie

Answer:BSOD with different error codes each time...

Hi,


Code:
0x00000133: DPC_WATCHDOG_VIOLATION (5.07.2017 20:24:37) [Windows 10]

CAUSED BY: memory_corruption

PROCESS: System


Code:
0x00000189: BAD_OBJECT_HEADER (5.07.2017 18:24:50) [Windows 10]

CAUSED BY: memory_corruption

PROCESS: OneDrive.exe


Code:
0x0000003B: SYSTEM_SERVICE_EXCEPTION (5.07.2017 17:20:35) [Windows 10]

CAUSED BY: memory_corruption

PROCESS: NVIDIA Web Helper.exe

Usual causes: System service, Device driver, graphics driver, ?memory


There are many different bugchecks in the dumpfiles.

The cause for different error codes are usually hardware and lower level problems.

U should begin with:


Diagnostic Test

 RAM TEST

Run MemTest86+ V5.01 to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums


   Note
MemTest86+ V5.01 needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

More Info here: Memory problems. - Microsoft Community


Make a photo of the result and post it.

0 more replies
Relevance 45.92%

Trying to figure out what causes all these stop codes. New computer, specs below. Sometimes while working in Adobe Premiere Pro, I get a crash. Sometimes it's when I move the mouse. Sometimes, it's when I open a program. Each time, it seems, I get a different code. I have no idea as to what may be causing it. I've attached the ZIP file. Please, any help would be greatly appreciated. I've run a registry cleaner, and cleaned that up. I've updated BIOS, and as far as I can tell, under system management, there aren't any yellow exclamation marks warning me about drivers. The ONLY thing that I did, prior to having problems, was UPDATE Adobe Creative Cloud. Maybe something in there is causing the problem, but then again, I get crashes all the time without even opening the software.

Windows 10
Intel i7 6850k
Asus X99 MB
Balistix RAM (48GB -- 2x16, 2x8)
GTX 1070
1000wt Power Supply
2 SSDs, 5 HDDs

Answer:BSOD Various Stop Codes, Various Reasons

A lot of these dumps are indicating memory corruption. Those could be due to the graphics driver, a network driver, AV or tools such as daemon tools.

3 more replies
Relevance 45.92%

Hello, this is my first post here . I have bought my laptop before 2 months and i have BSOD since then , nno matter what im doing ... Once it happened while there was no one using the laptop .

p.s. here are some of the BSOD codes i had :

PAGE_FAULT_IN_NONPAGED_AREA
NTFS_FILE_SYSTEM
SYSTEM_SERVICE_EXPEPTION
SYSTEM_THREAD_EXEPTION_NOT_HANDLED

they are different everytime

p.s.2 when i bought the laptop it had linux installed ( i think ) or it was ready for install . Could the problem come from there , and if yes what can i do about it . Im not so known with those things . Ive heard about a hidden memory which should be deleted (if there was linux before ) and its going to fix the problem , but i dont know what is that memory and where i can find it.
Ive send the laptop on authorized repair service of Acer ( cuz my laptop is still in guaranty ) , and yes they didnt fix it .... 2 times ... the first time they gave me the laptop with new HD , second time they told me something about a "weak connection" that they "fixed".
BUT my laptop is still here and i ahve BSOD randomly 2-3 tiems a day , and every game crashes after 10-30 mins after start . I wil lsay it again - the BSOD appeared once or twice without me even touching the laptop

Answer:BSOD appears randomly with different codes

You only have 133 Windows Updates installed. Most systems have 160 - 180 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Windows systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions).





Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): New link (15 Aug 2012): DuplexSecure - Downloads (pick the appropriate version for your system and select "Un-install" when you run it).
Alternate link: Disk-Tools.com
Manual procedure here: Registry and SPTD problems | DAEMON Pro Help



Out of 11 memory dumps there were 6 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking/overheating - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
- missing Windows Updates
- compatibility issues (3rd party hardware/drivers) - and older systems
- low-level driver problems (su... Read more

1 more replies
Relevance 45.92%

System specsSony Vaio Sve15136
OS win 10 single language 64 bit
Processor Intel core i5
RAM 4gb
Graphics AMD Radeon HD 7650M
I recently upgraded to win 10 .Now getting random bsods with different codes although drivers seem to work fine.

Answer:Random BSODS With different Bsod codes

Please follow the instructions at the top of your thread:






Before posting a BSOD thread, please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions

If you need to add new information, please make a new post in your initial BSOD thread. Please do not make an extra new thread.

Please do not post anything other than Windows 10 Blue Screen Of Death problems in this section.

9 more replies
Relevance 45.92%

System specsSony Vaio Sve15136
OS win 10 single language 64 bit
Processor Intel core i5
RAM 4gb
Graphics AMD Radeon HD 7650M
I recently upgraded to win 10 .Now getting random bsods with different codes although drivers seem to work fine.

More replies
Relevance 45.92%

Hello everyone. i recently installed Windows 7 Ultimate 32 Bit again 2 weeks ago because of some issues. But after the installation i get BSOD almost at every boot-up. i updated the Windows, updated the GPU's driver which is ATI Radeon HD7850. And finally updated ethernet card's driver yesterday after i read a user's thread in the forum that got the same "IRQL_Not_Less_or_Equal" error. But i'm still getting the BSOD with random error names... Could anyone please help me?

Here is the configuration of my PC:

Operating System
Windows 7 Ultimate 32-bit SP1

CPU
Intel Pentium E6300 @ 2.80GHz
Wolfdale 45nm Technology

RAM
4,00GB Dual-Channel DDR2 @ 400MHz (6-6-6-15)

Motherboard
BIOSTAR Group TPower I45 (CPU 1)

Graphics
1024MB ATI AMD Radeon HD 7800 Series (Sapphire/PCPartner)

Storage
232GB Western Digital WDC WD2500AAKS-00L9A0 ATA Device (SATA)

Answer:Random BSOD codes almost at every boot-up

How did you activate your copy of Windows?

2 more replies
Relevance 45.92%

I just got my new computer and I've been getting Blue screens regularly. I've got multiple reasons for the errors but most often KERNEL_MODE_EXCEPTION_NOT_HANDLED . I also occasionally get pop up error saying that it can't read/write some address. I thought it was memory problem and ran memtest86+ for 13 hours with no errors.

I formatted the computer but am still getting BSOD. The specs of my computer are:
Operating System
MS Windows 7 Ultimate 32-bit
CPU
Intel Atom D425 @ 1.80GHz 67 ?C
Pineview-D 45nm Technology
RAM
2.0GB Single-Channel DDR2 @ 400MHz (6-6-6-15)
Motherboard
Intel Corporation Corbett Park CRB (CPU 1) 38 ?C
Graphics
Generic PnP Monitor ([email protected])
Intel(R) Graphics Media Accelerator 3150
Intel(R) Graphics Media Accelerator 3150
Hard Drives
313GB Western Digital WDC WD3200BEVT-22ZCT0 ATA Device (SATA)

Any thoughts?

Answer:BSOD mutible error codes possible RAM

Hello,

You may need to run hardware tests...
RAM - Test with Memtest86+
http://www.sevenforums.com/tutorials...t-prime95.html
Video Card - Stress Test with Furmark

This 2009 version is a known BSOD cause. Update it - Realtek

Code:
Rt86win7.sys Thu Feb 26 22:04:22 2009
Install SP1: Learn how to install Windows 7 Service Pack 1 (SP1)

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000008E, {c000001d, 8904a211, a6a199a0, 0}

Probably caused by : hardware ( afd!AfdPartialDisconnect+424 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e)
This is a very common bugcheck. Usually the exception address pinp... Read more

1 more replies
Relevance 45.92%

Aaaarrrgggghhhh

I'm getting the BSOD upon shut down (it does NOT happen in Safe Mode which probably means it's a driver issue... but how to find which one?)

Error Code:

0x0000008E (0xc0000005, 0x8060e31b, 0xf7972a54, 0x00000000)


 

Answer:Shutdown BSOD with Error Codes

Operating System?

Does it only happen when shutting down?
 

5 more replies
Relevance 45.92%

I am having frequent BSOD's always with different error codes. I am basically assuming my motherboard is faulty.

More details here: Blue Screen. BCCode: 1e - Microsoft Community

Basically I have ran memtest 5.01 for 18 hours (8 passes), ran seagate tools, dskchk, I swaped out video cards (the original card which I thought caused problems works perfectly in a friends system).

However, someone mentioned to physically test the ram and plug it out 1 by 1. I was wondering tho if there is a quicker method. Should I use 2 pairs at a time? Or just 1? Or keep 3 at a time and keep swapping 1 at a time.

Or go ahead and trust memtest that none of my 4 modules are bad and RMA my motherboard.

Answer:Different BSOD codes, hardware related

Please follow - Blue Screen of Death (BSOD) Posting Instructions

1 more replies
Relevance 45.92%

Hello everyone, I have just registered to these forums for this particular problem that I have been having in the recent days. The problem with my computer is that it goes into blue screen at 'predictable' times, I will go into the predictable part in a bit.

Back to the topic, my BSOD's have so many different reasons, even much more than I can remember. The ones that come into my mind just now are IRQL_NOT_LESS_OR_EQUAL, or MEMORY_MANAGEMENT, or BAD_POOL_HEADER, and finally REFERENCE_BY_POINTER.

Now back to the weird, predictable part I was talking about. The thing is that these BSOD's only show up during, or after 5-10 minutes of the initial startup. If the computer manages to get by that part without having any actual problem, it never again gets into the blue screen again. (It has managed to work all day several times without a problem.) The major point is that I sometimes have to restart 4-5 times to get the computer running and get over all those errors.

Thanks for anything in advance.

Answer:Random BSOD with different error codes

Blue Screen of Death (BSOD) Posting Instructions

1 more replies
Relevance 45.92%

Hi,

I seem to get 1 BSOD each day I use my computer for more than an hour or two.

MSI GT70 2OD
Intel i7 4700mq
Intel HD4600 and Nvidia GTX780m

I have been told previously that the BSOD's i get have been graphics driver related. I have basically been going through every different driver I can find to hopefully find a combination where they do not conflict and crash.

If someone could please take a quick look and make sure im still on the right track with Graphics card drivers. Would be great to find out I just missed something obvious and will be a quick fix.

I was thinking I should roll back to windows 8 from 8.1 but a quick look around and it seems these GT70's suffer from the blue screens on windows 8 too.

Would be greatly appreciative of any help.
Thanks

Answer:BSOD's with multiple different error codes

Your BSODs are various and assorted. Something is misconfigured in the machine.

Start with updating the bios to latest, from manufacturer. Then, set Optimized Defaults in the bios and save. (Make sure you set AHCI mode for the hard drive(s) after, if that is how it is currently set - AND - Optimized Defaults set it wrong.)

When back to Windows, use CPU-Z to compare the Memory Tab to SPD tab. The SPD tab will tell you how the memory should be set. See if Memory tab reflects that well.

Let us know how it goes please, and let us know if you need further help.

If you have mismatched memory sticks, remove the slower ones and leave only the faster ones. Check the motherboard manual for which slots to have memory installed properly.

Make sure cooling is working sufficiently and the fans are clean. Use the laptop on a flat surface where the air can easily exit the port(s).

If you're overclocking with any sort of utility in Windows for anything at all, uninstall now for testing purposes.

I personally really don't like this driver file on your 8 machine:


Code:
4: kd> lmvm mBfilt64
start end module name
fffff800`03dba000 fffff800`03dc8000 MBfilt64 (deferred)
Image path: \SystemRoot\system32\drivers\MBfilt64.sys
Image name: MBfilt64.sys
Timestamp: Thu Jul 30 23:40:32 2009 (4A7267B0)
CheckSum: 0000FF02
ImageSize: 0000E000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

... Read more

4 more replies
Relevance 45.92%

So the last week or so I've been getting a BSOD while playing archeage, which I've never had a problem before. Not sure if this is after I started overclocking my PC to 4.0ghz or after I dusted it inside out to make it run better. I've done chkdsk and chkdsk started up a couple times on its own on restart and found some corrupted files and repaired them. Thought it would fix the problem but it hasn't. I've attached an SFC scan since I don't know how to look into it. I plan to learn in the future and head into IT. But for now I need help.. I've ordered a brand new SSD just in case it is the hard drive and will backup my Data. Thank you for your time

More replies
Relevance 45.92%

I bought a new motherboard and processor yesterday and the guys at the shop installed it, but it blue screens a lot after I got it back, sometimes it doesn't even load into windows and I have to restart it a couple of times before it goes into windows, the guys at the shop thought the solid state might be dying but if I restart enough times I get into windows ... very ****ing odd since it was fine before I brought them the computer

I attached 5 different crash logs, with 3 different bug check codes ... any help would be appreciated

Answer:BSOD, multiple bug check codes

Hello there!

Seems like it might be your sound card cmudaxp.sys. I would recommend to re install it. Also one of the crashes is pointing to Kaspersky Internet Protection. I would recommned to just remove it for the time being and see if the crashes stop.

I have mentioned the list of drivers. Please date anything older than 2012.

Bugcheck:


Code:
Debug session time: Thu Mar 13 13:31:22.682 2014 (UTC + 5:30)
Loading Dump File [C:\Documents and Settings\XPMUser\SysnativeBSODApps\031314-7690-01.dmp]
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
System Uptime: 0 days 8:00:53.352
*** WARNING: Unable to verify timestamp for cmudaxp.sys
*** ERROR: Module load completed but symbols could not be loaded for cmudaxp.sys
Probably caused by : cmudaxp.sys ( cmudaxp+17f7 )
BugCheck FC, {fffff880073fa5b4, 80000000b877d963, fffff80000b9c1f0, 0}
BugCheck Info: ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
Bugcheck code 000000fC
Arguments:
Arg1: fffff880073fa5b4, Virtual address for the attempted execute.
Arg2: 80000000b877d963, PTE contents.
Arg3: fffff80000b9c1f0, (reserved)
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR: 0xFC
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xFC_cmudaxp+17f7
MaxSpeed: 3500
CurrentSpeed: 3499
BiosVersion = P1.10
BiosReleaseDate = 11/29/2013
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
??????????????????????????????????????????????????????????????????????????????... Read more

9 more replies
Relevance 45.92%

So I don't know how this happened at all as I came down stairs and saw this screen but I was able to capture a picture of the screen with the technical information.


Here are the errors that I typed manually from the picture if the picture doesn't show up.

stop: 0x0000007e (oxffffffffc0000005, 0xfffff800034f158d, 0xfffff88005283db8, 0xFFFFF88005283610

Answer:BSOD, not sure how it happened. Have error codes.

The crash dump reports a display failure.

Uninstall the installed display driver using Display Driver Uninstaller. Then install the CCC 14.4 WHQL only.

When done, stress test the Graphics Card using Furmark. Video Card - Stress Test with Furmark
Take a screenshot of the furmark window before closing it. Upload the screenshot for us. Also let us know if you have experienced any crash/BSOD and/or artifacts during the test.
______________________________________________________________

Code:
BugCheck 1000007E, {ffffffffc0000005, fffff800034f158d, fffff88005283db8, fffff88005283610}

Probably caused by : atikmdag.sys ( atikmdag+136523 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system ... Read more

1 more replies
Relevance 45.92%

I have a newly built computer only a few months old. Can anyone help me find the cause for all these BSOD codes?

Answer:Many different BSOD error codes.... No idea why. can anyone help?

BSOD Analyse

Processes

Can you identify what this belongs to?


Code:
mdnsresponder.exe c:\program files (x86)\bonjour\mdnsresponder.exe 1964 8 200 1380 16/08/2012 21:55 2.0.2.0 337.28 KB (345,376 bytes) 18/05/2010 16:35
Memory / Driver

Looking at your bugcheck it's likely that a memory corruption event was triggered. Though a driver could be causing the memory to be borked, but we're usually suggesting a memory test before moving forward. Do a scan with Memtest86+. Memtest is a scanner that'll check your sticks for errors.



   Warning
Note that the below instructions may break your WARRANTY rules. If you're unsure check manuals, separated warranty papers, stickers on computer for secure permission.

To ensure that we'll know if it's the slots on the motherboard that's broken, or the sticks itself - we have a little procedure we'll recommend. Remove 1 stick, scan the other with Memtest in the current slot. After 7 passes, move the stick to another slot and scan, and so on and so forth until you've scanned all the sticks, and all the slots, one by one.

Memtest86+ - Advanced Memory Diagnostic Tool

Daemon Tools

Known BSODs causer. You can use the below uninstall in order to remove it completely. Instead you could use Magic-ISO.

DuplexSecure - Downloads


Code:
dtsoftbus01.sys Fri Jan 13 14:45:46 2012 (4F10358A)
Best Regards,
Frederik.

3 more replies
Relevance 45.92%

Didn't add any new hardware or software and surfed normally to no new sites before bed. Set my online wake-up alarm and went to bed. When I woke up I had BSOD. I have tried all different ways to boot and there is no rhyme or reason why it sometimes loops or sometimes goes into safe mode. I tried booting from the system 7 disc in my optical drive but it only loops back to the beginning. I am now in Safe Mode but no connections are available. HELP!


Here's my system:

MSI 785GTM-E45 Phenom II X4 Barebones Kit - MSI 785GTM-E45 Mobo, AMD Phenom II X4 920 CPU, Zalman CPU Fan, Patriot 4GB (2x 2GB) DDR2 RAM, Seagate 1TB LP HDD, Thermaltake V3 BE Case, Diablotek 550W PSU (B69-0352)

AOC e2043F 20" Widescreen LED Backlit LCD Monitor - 1600?900, 16:9, 60Hz, 50000000:1 Dynamic, 5ms, VGA, DVI, Tilt (A204-2018)

Logitech 920-000914 Illuminated Keyboard (L23-7316)

Logitech M505 Wireless Mouse - Red (L23-1105)

Lite-On IHAS124-04 Internal DVD Writer - DVD+R 24X, DVD-R 24X, DVD+RW 8X, DVD-RW 6X, DVD+R DL 8X, SATA (OEM) (L12-1312 OEM)

Microsoft Windows 7 Professional 64BIT Operating System Software - OEM DVD (M17-7306)

Answer:New BSOD NEED HELP (error codes attached) !!!

Hey all this is a friend of mine needing help, your thoughts are greatly appreciated!

4 more replies
Relevance 45.92%

I have been having the following problems with my system at different times of use. I play Star Wars the Old Republic and use my PC for email, facebook, and other small tasks.

System Specs:

Windows 7 Home Premium x64 (OEM)
AMD Phenom II X4 820 (2.8 GHz)
Nvidia Geforce GTS 450 (EVGA)
6 GB RAM (3 x 2GB) DDR3 PC3-10600 MB/Sec
500w Thermaltake PS

The System was purchased from Best Buy in December of 2010. The model is HP p6674y.

Here is what I have done so far:

I installed the after market video card and power supply in mid January of this year. It ran fine for three weeks then the blue screens started. I tracked the stop codes and tried to isolate whether or not it was hardware or software related. I found some threads with HP printers being an issue so I removed my new printers drivers. AVG was also showing up so I installed Avast.

None of this worked and my comprehension is limited. I performed a system recovery to avoid any more hassle but it still blue screened. I also removed my video card to see if that was the cause but it still crashed.

Next I thought my system was overheating. I do not know the legitimacy of system temp programs and the acceptable temp range for a CPU to run at. Knowing that, I pulled the side of my tower off and used a small desk fan to cool it. I also used compressed air to clean the heat sinks on my CPU and all other parts of the motherboard. It still went to blue screens with the cooling steps taken.

I followed the instructions and have a... Read more

Answer:BSOD with multiple error codes.

> I note you have Avast.
Avast can be a contributing cause of BSOD'S .
Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST

http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows
> I suggest you run the update readiness tool and then update to SP-1

Ensure you install the correct 64 or 32 bit option for your system)

Download the System Update Readiness Tool (64bit)
Download the System Update Readiness Tool (32bit)

Now update to SP-1

Learn how to install Windows 7 Service Pack 1 (SP1)

9 more replies
Relevance 45.92%

Hi everyone,

I've been researching this problem without success. The BSODs started last week. I first ran the Memory Diagnostic tool and found some "hardware" problems. However, the stop codes that I've been getting seem to point toward a driver issue. It could be both, though.

The minidump files generated provide little or no information in Windbg, at least for me. When the crash files are loaded, it's just empty:


Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Jason\Desktop\012511-27097-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0x82a49000 PsLoadedModuleList = 0x82b91810
Debug session time: Tue Jan 25 22:10:55.604 2011 (UTC - 5:00)
System Uptime: 0 days 0:00:43.555
Loading Kernel Symbols
...............................................................
................................................................
................
Loading User Symbols
Loading unloaded module list
....
This is with ALL the crash files.

Can someone please help me analyze them?

https://cid-a16fa374d533ff4c.office..../minidumps.zip

Answer:BSOD with various stop codes - need help with minidumps

Hi jace319 and Welcome,

Your link gives: This item might not exist or is no longer available
Please see:Windows 7 - Blue Screen of Death (BSOD) Posting Instructions.

4 more replies
Relevance 45.92%

I started having bsods about a week after I built my computer with new parts. Before the reinstall I ran memtest for 6 passes and no problems were found. I thought it might have been a driver problem so this Windows reinstall I made sure to ONLY install the most up to date drivers from the websites (did not use CDs that came with GPU and MOBO). I got a BSOD 2 days after my reinstall.

BSOD codes 3b and 1e are most common but there are others.

? OS - Windows 7 Home Premium 64-bit
? Original OS - Windows 7 Home Premium 64 bit (new computer)
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)?
? Age of system - 2 months
? Age of OS installation - 2 days
? CPU - i3-3220 CPU @ 3.30ghz
? Video Card - ASUS Radeon HD7850
? MotherBoard - ASROCK H77M
? Power Supply - Corsair CX430, 430w, 100-240V

Thank you in advance for your help!

Answer:BSOD - codes 3b, 1e. still persists after reinstall

Hi,

First off, with the perfmon:


Quote:




The device driver for SM Bus Controller has not been installed. This device will not be available until the correct device driver is installed.




This implies you don't have your System Management Bus drivers installed (chipset drivers). It's very important you install your chipset drivers as they are integral to the functionality of your system.

Also, there are no DMP files in your attached jcgriff output folder. Can you manually navigate to %systemroot%\Windows\Minidump and zip up + attach here?

Regards,

Patrick

15 more replies
Relevance 45.92%

I did not want this.
I accidentally purchased a motherboard with integrated graphics, and the last 24 hours confirms my initial fear of purchasing one.
CPU has integrated graphics. Motherboard, same. Throw in a stand-alone graphics card and you can start to imagine the train wreck of BSOD codes I get.
Updated BIOS and updated all drivers direct from each manufacturer's site.
Able to access Safe Mode with Networking.
If I remove the Video card, I could run normal mode off the motherboard's graphics, but no DirectX 3D acceleration. Updated the CPU with a 3D driver from their site, and Windows won't work anymore unless I run Safe Mode, (with networking.)
Paging fault errors, IRQL errors, Memory Management errors, and more all show up in BSOD when I try to run off the video card in normal mode.
Tried to disable the integrated graphics on the motherboard, but all it lets me do is choose whether to boot/run off PEG or IGD. Obviously I tried both, but they only work when I run in safe mode.

BSOD Dump file attached.

Answer:Too many BSOD codes, trouble with new build.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc000001d, The exception code that was not handled
Arg2: fffff88001b3b120, The address that the exception occurred at
Arg3: fffff880033c0f48, Exception Record Address
Arg4: fffff880033c07a0, Context Record Address

Debugging Details:
------------------

TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2

EXCEPTION_CODE: (NTSTATUS)... Read more

9 more replies
Relevance 45.92%

The required files are attached..

New laptop, 2 weeks old.. no problems till today, but have suddenly had lots of crashes. No new hardware... no new software... no obvious way to trigger BSOD either.

Acer Aspire 5755g laptop

Is Windows 7 . . .
- x86 (32-bit) or x64 ? 64bit
- the original installed OS on the system? Original OS
- an OEM or full retail version? OEM
- What is the age of system (hardware)? 2 weeks
- What is the age of OS installation (have you re-installed the OS?) no reinstall

Many thanks for any help guys!

Kermola

Answer:BSOD random moments, various codes.

Hello,

As surprising as this may sound, I suspect a hardware problem. Run a few hardware diagnostics, let's see if we can find out exactly what part is causing the trouble. The most likely candidates are RAM and motherboard here.

Run all three Prime95 tests: Hardware - Stress Test With Prime95

Also run Memtest86: RAM - Test with Memtest86+

...Summary of the dumps:

Code:

Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Fri Dec 30 17:12:04.934 2011 (UTC - 5:00)
System Uptime: 0 days 3:02:35.182
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+36024 )
BUGCHECK_STR: 0x1a_41790
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: WerFault.exe
FAILURE_BUCKET_ID: X64_0x1a_41790_nt!_??_::FNODOBFM::_string_+36024
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Fri Dec 30 12:52:39.756 2011 (UTC - 5:00)
System Uptime: 0 days 0:10:47.005
Probably caused by : ntkrnlmp.exe ( nt!ExAcquireResourceSharedLite+4e )
PROCESS_NAME: System
BUGCHECK_STR: 0x34
DEFAULT_BUCKET_ID: NULL_CLASS_PTR_DEREFERENCE
FAILURE_BUCKET_ID: X64_0x34_nt!ExAcquireResourceSharedLite+4e
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Fri Dec 30 12:00:39.937 2011 (UTC - 5:00)
System Uptime: 0 days 0:16:14.186
Probably caused by : ntkrnlmp... Read more

5 more replies
Relevance 45.92%

System specsSony Vaio Sve15136
OS win 10 single language 64 bit
Processor Intel core i5
RAM 4gb
Graphics AMD Radeon HD 7650M
I recently upgraded to win 10 .Now getting random bsods with different codes although drivers seem to work fine.

Answer:Random BSODS With different Bsod codes

Please follow the instructions at the top of your thread:






Before posting a BSOD thread, please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions

If you need to add new information, please make a new post in your initial BSOD thread. Please do not make an extra new thread.

Please do not post anything other than Windows 10 Blue Screen Of Death problems in this section.

1 more replies
Relevance 45.92%

Hey guys!
I hope you can help me, those BSODs are bugging me for a couple of weeks now...

Most of the time they pop up shortly after Windows has booted up. Sometimes I get them while playing a game or surfing the web, no real pattern there.

I already tried replacing RAM and HDD, but still get those same pesky BSODs. Did a fresh installation of Win 7 as well. The BSODs stopped a while, but came back soon enough.

I got an OEM version of Win 7 Home x64 installed. The system is roughly one month old and I've been getting the BSODs a couple of days after starting the system up for the first time.

I would be eternally grateful, if someone were able to help me

Answer:BSOD at least 2 times a day, various error codes

Problematic Software:
Code:
Start Menu\Programs\TuneUp Utilities Public:Start Menu\Programs\TuneUp Utilities Public
Many of us on the forums actually do not recommend automated optimization tools for Windows 7. Windows 7 does a much better job of handling its own optimization than its predecessors did. We especially do not recommend registry cleaning as an "optimization" step because automated registry cleaning causes more harm to the registry than it actually repairs.

In the future, if you need help optimizing Windows 7, please post a thread in Performance & Maintenance - Windows 7 Forums or follow the tutorial enclosed in that forum to Optimize Windows 7.
Out of date driver that needs updating:
Code:
fffff880`06cbb000 fffff880`06d97000 netr28ux netr28ux.sys Wed Feb 25 19:49:17 2009 (49A6032D)
netr28ux.sys - Ralink RT2870 series USB802.11n Wireless Adapter Driver (you may have a different manufacturer); USB Wireless network adapters are unstable in general because the USB ports do not supply the power required to be reliable. With an out of date driver, this may be causing further conflicts.

Many of your crashes were DirectX/graphics card related. DirectX comes installed with Windows, so this may indicate Windows corruption. It may also be that you have corrupted drivers or a graphics card hardware problem.
If you are overclocking any hardware, please stop.

Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three... Read more

9 more replies
Relevance 45.92%

Ok Well i've been getting BSOD for about 2-3 weeks now since updating some drivers on my laptop and it is really annoying. I have Windows7_Vista_jcgriff2 with all the required files needed for someone to look at. BTW i am new to this forum so go easy on me.

System Specs: Windows 7
- x86 (32-bit) or x64 ? x86
- the original installed OS on the system? No was originally Windows 7 Home Premium
- an OEM or full retail version? OEM
- What is the age of system (hardware)? 3 years
- What is the age of OS installation (have you re-installed the OS?) 6-7 Months

Attachment 208157

Answer:BSOD multiple error codes

No one is willing to help?

5 more replies
Relevance 45.92%

I updated from windows 7 the day that 10 launched and for a few days everything worked perfectly, then I crashed a few times, and today I crashed three times, all for different reasons.

The first crash was a kernell_data_inpage_error. I did occasionally get this in 7, and from what I understand there's not a whole lot that can be done about it.

The second crash gave me the unexpected_store_exception

The third gave me dpc_watchdog_violation

Also occasionally after the crashes my computer wont boot, I get a black screen with white letters telling me to insert a boot drive. In order to fix this I take my battery out and wait a minute before putting it back in. For whatever reason that lets windows boot up.

I've been told it may be a driver issue, does anyone have any clue what may be causing it?

Answer:Multiple BSOD error codes

Hi Alagene,

I'm very sorry for the delay, there aren't many people in this section.
Are you still requiring help?
If so, please use the tool again and upload a new zip file.

Please fill in your system specsPlease go to this site and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

1 more replies
Relevance 45.92%

most build is from sept with exceptions being monitors and 1080.

I began having multiple crashes and have tried replacing a few parts, mobo,ram, gpu all resulting in no change in my issues. I tried using a different sdd and still had same problems. I did a clean reformat tonight and after initial set up got BSOD: stop code: REGISTRY ERROR.

any help is appreciated.

6800k no OC
x99 strix gaming mobo
32gb ddr4 2666
1080 gtx strix
m.2 950 pro 256gb(main)
AX860 psu

I have attached DM log collector zip

Answer:BSOD: NTFS.sys different stop codes

Do you still get BSOD after the new installation of your system?
Because the dumpfiles are before the reset, are probably no use anymore.

But i found these older drivers:
SiLib Fri Jul 16 00:08:26 2010 (4C3F86DA)
SiUSBXp Fri Jul 16 00:27:13 2010
Driver Description: Silicone Labs USBXpress Development Kit
Driver Update Site: Silicon Labs Technical Support | Silicon Labs

IOMap64 Thu Oct 23 02:52:12 2014
Driver Description: ASUS Kernel Mode Driver for NT ?Asus Smart Doctor/iTracker 2 Asus GPU Tweak and GPU Tweak Streaming from this link: Solved BSOD after sleep, restarts, driver_power_state_failure )
Driver Update Site: http://support.asus.com/download/opt...uage=en&type=1

If you get another BSOD upload a new zip.

3 more replies
Relevance 45.92%

See: Windows 10 blue screen of death? Now Microsoft adds QR codes to BSOD crash support | ZDNet

Answer:Microsoft Adds QR Codes To BSOD's

Not sure it's to be posted here but yeah, i've seen this too on reddit.
I'm not sure if this will be more used or useful for the general user.
There are a lot of people that still don't know what a QR-Code is or how to use it.

I think it should be more useful that, after a BSOD, when the computer is booted and the user has logged back in, an internet page is opened where more information about the problem is displayed, what the user can do, ... . Maybe even the possibility to upload de DMP file to, let say version.xforums.com/bsod-crashes-debugging ?

5 more replies
Relevance 45.92%

Greetings,

Ive been running into blue screens randomly, playing games, browsing the internet etc.
They happen sporadically without warning, i could be playing a game perfectly for an hour without a hitch, and a BSOD will appear out of nowhere.

My build is fairly new, ASrock 970 extreme3 mobo, AMD fx-6300, Geforce GTX 550 ti, Samsung 250Gb hard-drive.

I don't have any anti-virus installed at the moment.

Ive been getting multiple stop codes with 0x1e being the most recent.
The DMP files are attached.

Answer:BSOD, new rig, getting multiple STOP codes

Hi Arsenic, Welcome to SF

Just had a look at your dumps and they are all over the place, different error codes and blaming all different drivers, graphics, audio, usb, disks

First step if you are OCing stop, even if your not enter bios and double check all settings and if necessary manually enter values

I would start by running some AV tests
http://support.kaspersky.com/5350
Windows Defender Offline
then install Microsoft Security Essentials - Microsoft Windows

next i would install some temperature monitoring software and keep an eye on them

next i would perform some hardware tests
RAM - Test with Memtest86+
Hard Drive Diagnostic Procedure
if they pass run
Hardware - Stress Test With Prime95
Video Card - Stress Test with Furmark

i would get rid of these types of programs
AMD\OverDrive
ASRock Utility\ASRock eXtreme Tuner

This program has a really old driver with it ASRock Utility\AsrAppCharger - FNETURPX.SYS 04/10/2008 is this current program i would update or remove

9 more replies
Relevance 45.92%

Hi guys,

I hope you can help me.

My Acer laptop has been running Vista OK until today when I switched it on and suddenly I have a BSOD.

The first error code is 0x00000051 (0x00000001, 0x88C23350, 0x0147F000, 0x00000368).

The second error code that also occurs from today is 0x0000008E (0xC0000005, 0x825570E6, 0x93F33A9C, 0x00000000).

I've tried running safe mode with networking and also the mode when it last worked (can't remember the exact term) but I still just get another BSOD with one of the two above codes.

What can I do to fix it? I desperately need to be able to access my digital photos

Answer:BSOD - 2 separate error codes

Quote:





Originally Posted by katiesam



The first error code is 0x00000051 (0x00000001, 0x88C23350, 0x0147F000, 0x00000368).

The second error code that also occurs from today is 0x0000008E (0xC0000005, 0x825570E6, 0x93F33A9C, 0x00000000).




Hi katiesam. . .

Welcome back - good to see you again. Sorry under BSOD circumstances.

The bugchecks -

0x51 = REGISTRY_ERROR = severe registry error has occurred. Usual causes are registry corruption or hard drive problem (can't load all registry files).

0x8e = KERNEL_MODE_EXCEPTION_NOT_HANDLED - a kernel mode app threw an exception not caught by error routine. Exception is 1st parm - 0xc0000005 - memory access violation. This c/b bad driver or kernel mode app itself. Hardware of course may be culprit.

If safemode and Last known good config did not help, invoke recovery partition or boot-up w/ Vista DVD try Windows Vista system restore 1st; system repair next.

You also should run hardware diagnostics in recovery partition - but try others 1st - pics 1st priority to save. chkdsk /r can be run from windows.

Regards. . .

JC

.

6 more replies
Relevance 45.92%

Hi,

Since yesterday evening, I've had a lot of crashes - apparently with no common theme. I don't recall installing anything new to start it off...

This afternoon I altered the settings so I actually get minidumps, and already I have 5 or 6 of them. See the attached zipfile.

I've gotten, as far as I can remember right now, codes 27, f4, 1e - but also, before I knew those were important, messages like "inpage_error" and "RDR_exception (i think).

I'll go out and buy myself some more RAM anyway.

Can you help?

Answer:Many different BSOD codes. crashes happen over and over again.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffffa7fffffffea, 0, fffff800036c806b, 7}
Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiMapPageInHyperSpaceWorker+1b )

Followup: MachineOwner
---------
Most 0x50 bugchecks are memory related. I would test your RAM thoroughly as follow:

Run a minimum of 8 passes, preferably overnight, or until errors occur using MemTest86+.

Reference this tutorial to help you use MemTest86+:
RAM - Test with Memtest86+

3 more replies
Relevance 45.92%

Recently been having issues with BSoD, it seems like it happens whenever I'm away from the computer. And at times I've even noticed my screen has gone white with some artifacting. You would assume it was bad video memory, but since the last crashes I've done all sorts of testing: results are below.

First I'll just give a little system info: Built it back in October and has been running flawlessly up until the last week or so.
Windows 7 Ultimate x64
Intel Core i5 3570k
AsRock Z77 Pro3
Adata XPG SX900 firmware:5.0.7b
Seagate Barracuda 2tb
AMD Sapphire HD 7950 w/boost: Catalyst 13.12
8Gb Patriot 1600Mhz CL9 (2x4Gb)

HDD testing:
Elevated Command chkdsk /f /r - (HKDSK discovered free space marked as allocated in the
master file table (MFT) bitmap. Correcting errors in the Volume Bitmap. Windows has made corrections to the file system.)
Seagate SeaTools - Passed
Checked with EaseUS partition master
CrystalDiskInfo - reported good drive health
aida64: Stress local disks - all fine and temps are amazing

Video:
Aida64: Stress GPU - no issues
ATItool: 1hour no artifacts
FurMark: Burn-in 1080p 2x MSAA no problems, highest temp was 63C
Battlefield 4: Have played for hours, sometimes the game crashes but that's EA/Dice's fault

Security:
Malware-bytes full scan - found some junk removed it
Windows Defender - Your computer is running normally
tdsskiller - no issues

Physically:
- Reseated memory
- secured SATA and molex connections


Critical_Obj... Read more

Answer:BSoD while idle - producing f4 and 7a codes nos

Guess it could always be a memory problem as well and should run memtest but ugh, it takes forever lol. That'll be next on my checklist if I have another BSoD thanks

3 more replies
Relevance 45.92%

I use my laptop for photo/video work and internet use, but I've been having a ton of problems recently. In January, I did a full system reformat, but when it started installing automatic updates, the computer would either freeze or go to the blue screen. I then started putting the computer into hibernate most of the time (at night and such).

It had been working for a while, but I would still occasionally get a blue screen, which would be fixed by a system restore point.

A few days ago, I installed one font for my photo work, and the computer froze. I turned the laptop off and back on, and immediately got a blue screen, with the error code ending in 3B. I've attached a screenshot of that particular blue screen. The screenshot is of the old blue screen, NOT the one I got today.

Yesterday, a friend advised me to run 'chk dsk', which I did. Afterward, the laptop worked PERFECTLY all day. I shut it down and went to sleep.

This morning, I woke up, turned on the laptop, and had a NEW blue screen, with the error message ending in 0A (that's a zero). I'm now running in safe mode with networking, because every time I try to run in normal mode, I get that blue screen.

I followed the directions on posting a BSOD issue, but I can't run step three. I've also enclosed a screenshot of what shows up during that, as an attachment.

Finally, I've enclosed the zip file of the dump. It's very important that I get this fixed, as I'm unable to do my work. Thank you.

I'm running Windows 7 Home... Read more

Answer:Two Different BSOD Error Codes, Need Urgent Help

Two issues

1-Symantec (causing memory exceptions)

Symantec is a frequent cause of BSOD's. I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST
http://us.norton.com/support/kb/web_...080710133834EN

Microsoft Security Essentials - Free Antivirus for Windows

* Did you run a FULL SYSTEM scan with Malwarebytes?
2-SP-1

Please run the System Update Readiness Tool (SURT) and then update to SP-1
32 Bit

Download: System Update Readiness Tool for Windows 7 (KB947821) [February 2012] - Microsoft Download Center - Download Details

64 Bit

Download: System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [February 2012] - Microsoft Download Center - Download Details
Now update to SP-1

Learn how to install Windows 7 Service Pack 1 (SP1)

7 more replies
Relevance 45.92%

Hello,

General System Information: (More details in zip.)
Manufacture: HP
Model: m8300f
Processor: Athlon 64x2 Dual Core 6000+ 3.00Ghz
RAM: 3Gb
Windows: Vista Home Premium 32bit

Over the past year we have had only a couple of BSOD. Then after reboot system resumed to operate normally. But over the last month we have experienced frequent crashes with random BSOD's daily/hourly. Each with different codes. I have updated everything that I can think of, BIOS, GPU, Windows etc. Nothing seemed to work. So I wiped and reinstalled vista. Re-updated everything and same result. Windows is the original that came with system and we are not running any crazy software. I have ran all of the suggested bootable memory checks (20 passes) and HD checks as well with no errors.

Not sure where to go next and wanted to get some additional eyes to help decode some of the errors. I am leaning more to a hardware issue but am new to diagnosing all of the potentials.

To add, I have noticed after system has been powered down over night that I have the most problems until heat builds in the system. On first boot, it wont get past the initial HP boot screen. Some times looking very fragmented. After restart it will go a bit further and then lock. Eventually after a few more attempts it will load in all the way. If it is set to go to sleep, then after waking it will go to BSOD. If left running it tend to hold longer with out crashing. But it will happen other times randomly.

Please le... Read more

Answer:Frequent & Random BSOD codes

Welcome
Wiped and reinstalled but still have the problem, its a hardware issue. Im leaning toward memory, lets test.
Guide to using Memtest86+ - Geeks to Go Forums

43 more replies
Relevance 45.92%

Hey everyone,

I have BSODs at various moments; they sometimes happen when I'm doing stuff on the computer, sometimes when my PC is completely idle at night. I can't corelate them to anything happening on my computer nor any driver in particular. This is a custom installation of W8 (triple-boot, without a recovery partition), which makes certain Windows Update updates impossible to install, too.

The computer is a Lenovo G710 with all pretty up-to-date drivers, AFAIK.

Here is the ZIP I have created using the tool attached to the forum. Could anyone help me with analyzing it and perhaps give me a hint how to do it myself in the future?

Thanks in advance!
~ phoe

Answer:BSOD on Windows 8.1 - various error codes

Please disable Nvidia streaming service within services.msc. Uninstall DT and remove its SPTD.sys driver (by using its installer from duplex secure website) and uninstall some Bazis emulation software.
If the issues persist, enable Driver Verifier to help us pinpoint the cause by testing the drivers. Driver Verifier - BSOD related - Windows 10, 8.1, 8, 7 & Vista - Sysnative Forums


Code:
BazisVirtualCDBus.sys Mon Aug 8 20:11:12 2011 (4E4026C0)
WinCDEmu virtual CDROM driver - Bazis Inc
http://www.carrona.org/drivers/driver.php?id=BazisVirtualCDBus.sys

btwl2cap.sys Thu Jul 26 17:14:41 2012 (50115EE1)
Broadcom Bluetooth L2CAP Servicen
http://www.carrona.org/drivers/driver.php?id=btwl2cap.sys

AcpiVpc.sys Sun Feb 17 02:52:02 2013 (512037C2)
Lenovo ACPI Virtual Power Controller
http://www.carrona.org/drivers/driver.php?id=AcpiVpc.sys

btwavdt.sys Thu Apr 18 19:27:13 2013 (51702CF1)
Broadcom Bluetooth AVDT Service
http://www.carrona.org/drivers/driver.php?id=btwavdt.sys

btwaudio.sys Thu Apr 18 19:29:23 2013 (51702D73)
Broadcom Bluetooth Audio Device
http://www.carrona.org/drivers/driver.php?id=btwaudio.sys

AmUStor.SYS Mon May 27 11:08:18 2013 (51A32282)
ALCOR Micro SD Card Controller
http://www.carrona.org/drivers/driver.php?id=AmUStor.SYS

bcmwl63a.sys Sat Jun 1 06:59:47 2013 (51A97FC3)
Broadcom 802.11 Network Adapter wireless driver
http://www.carrona.org/drivers/driver.php?id=bcmwl63a.sys

btwrchid.sys Thu Jun 20 02:23:46 2013 (51C24B92) ... Read more

2 more replies
Relevance 45.92%

For the past couple weeks my machine has been getting Random BSOD with different stop codes. I hadn't done much to rectify the problem other than google the stop codes to see what may the problem. I've learned it could be anything from failing hardware to driver conflicts. Pretty vague. So I just decided to format and reinstall Win 7 and see if that helped. Of course it didn't, so I've come here for the expertise of you gentleman...

I went through the BSOD posting instructions and I hope I've done everything properly. It's a lot of information.

See attached.

Answer:Getting Random BSOD with different stop codes

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Win7 systems (mostly due to the sptd.sys driver, although we have seen dtsoftbus01.sys blamed on several occasions). Please uninstall the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration):
DuplexSecure - FAQ

Log Me In/Remote anywhere software seems to be contributing to the crashes.

Uninstall it using the free version of Revo Uninstaller. While uninstalling a software, opt for advance uninstall. This allows you to remove and delete registry left over of a stubborn program. Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Check for a BIOS update:
BIOS Version/Date American Megatrends Inc. P2.60, 10/1/2010

Eset antivirus is contributing cause of your BSOD's. I would remove it with the uninstall tool and replace with Microsoft Security Essentials & the Free version of Malwarebytes, update and make a full scan separately:
Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase
Microsoft Security Essentials - Microsoft Windows
Malwarebytes Free

Run a system file check and disk check on your Hard drives:
SFC /SCANNOW Command - System File Checker
Disk Check

Test RAM with memtest86+:
RAM - Test with Memtest86+
Pay close attention to part 3 of the... Read more

5 more replies
Relevance 45.92%

Hello, my computer has been blue screening alot and any help would be very much appreciated! The bsod's always seem to occur when i'm either watching videos on youtube or playing a video game, though I've also had crashes during start up. I also feel i should mention that my computer often has trouble starting and that i reinstalled windows seven a little while ago in a attempt to get rid of the bsod's, anyways here is some info.

System specs:
amd phenom II x4 975 (black edition) not currently overclocked
Asus m4a87td evo motherboard
sapphire hd 6950 2gb not currently overclocked
4GB (2GBx2) DDR3/1600MHz Dual Channel Memory Module
rosewill 80 plus bronze 1000w power supply


here are some error report things:

Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF96000104A53
BCP3: FFFFF880065EE0C0
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80002A9FFA9
BCP3: FFFFF8800310F908
BCP4: FFFFF8800310F160
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1


BCCode: 24
BCP1: 00000000001904FB
BCP2: FFFFF88008F8FB08
BCP3: FFFFF88008F8F360
BCP4: FFFFF80002ADA0C5
OS Version... Read more

Answer:getting lots of bsod's, several different error codes.

Welcome aboard.

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

9 more replies
Relevance 45.92%

Hi everyone,

I've been researching this problem without success. The BSODs started last week. I first ran the Memory Diagnostic tool and found some "hardware" problems. However, the stop codes that I've been getting seem to point toward a driver issue. It could be both, though.

The minidump files generated provide little or no information in Windbg, at least for me. When the crash files are loaded, it's just empty:


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Jason\Desktop\012511-27097-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0x82a49000 PsLoadedModuleList = 0x82b91810
Debug session time: Tue Jan 25 22:10:55.604 2011 (UTC - 5:00)
System Uptime: 0 days 0:00:43.555
Loading Kernel Symbols
...............................................................
................................................................
................
Loading User Symbols
Loading unloaded module list
....
I get this result when looking at all the minidumps....so I'm not really getting too much information from them...not sure what I'm d... Read more

Answer:BSOD with various stop codes...need help with minidumps

Uninstall Daemon Tools - then use this free tool to remove the sptd.sys driver that's most likely causing this problem: DuplexSecure - FAQ

More to follow when the dumps finish running.

2 more replies
Relevance 45.92%

I have been having multiple BSODs every day recently. It started about 6 months ago (only a few BSODs a week), but has been getting worse. As described in the posting instructions here is some system spec info:
- System Manufacturer/Model: Dell/Studio XPS 8000
- Operating System: Windows Home Premium x64
- the original installed OS on the system? Yes.
- an OEM or full retail version? OEM
- What is the age of system (hardware)? ~2 years old
- What is the age of OS installation (have you re-installed the OS?) ~2 years old
- CPU: Core i5 750 @2.67 GHz 2.66 GHz
- RAM: 6 GB
- Graphics Card: GeForce GT220
- AntiVirus: Microsoft Security Essentials

I have also attached the requested information listed on the posting instructions by jcgriff2. Please let me know if you need any additional information. Any help would be much appreciated.
Thanks!

Answer:Multiple BSOD every day - Various Error Codes

  
Quote: Originally Posted by busler


I have been having multiple BSODs every day recently. It started about 6 months ago (only a few BSODs a week), but has been getting worse. As described in the posting instructions here is some system spec info:
- System Manufacturer/Model: Dell/Studio XPS 8000
- Operating System: Windows Home Premium x64
- the original installed OS on the system? Yes.
- an OEM or full retail version? OEM
- What is the age of system (hardware)? ~2 years old
- What is the age of OS installation (have you re-installed the OS?) ~2 years old
- CPU: Core i5 750 @2.67 GHz 2.66 GHz
- RAM: 6 GB
- Graphics Card: GeForce GT220
- AntiVirus: Microsoft Security Essentials

I have also attached the requested information listed on the posting instructions by jcgriff2. Please let me know if you need any additional information. Any help would be much appreciated.
Thanks!



These crashes were caused by memory corruption (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.
If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, a... Read more

3 more replies
Relevance 45.92%

I assembled a new PC few weeks back with windows 10pro +i7 7700 + gigabyte b250m d3h+ ssd+ hdd+ 8gbram+ nvidia geforce gtx750ti 2gb.
But only after a day when i installed few games and applications it started giving BSODs which is super annoying when im working on a DAW or playing a game!!
the stop code is not the same always.
i will list few below::
system_service_exception
irql_not_less_or_equal
dpc_watchdog_violation
critical_process_died
bad_pool_header

i have updated my windows+nvidia's latest drivers from the device manager also but its of no use.
Is there some hardware issues or memory (RAM) issues??
 

More replies
Relevance 45.92%

So just last night; while internet surfing, the computer randomly decided to restart on me.

When it starts up; I get a BSOD code 0x24.
After, it had a different error code. 0x50

When attempting StartUp Repairs, I get error codes as well.

It might have to do with system files.

Can someone help me out here?
Oh, and Safe Mode doesn't work as well.

(and can anyone give a solution that doesn't involve formatting the hard drive? I have games that I don't want to go through downloading and playing through where I left off)

More replies
Relevance 45.92%

Okay..
So here we go.

I was having blue screens everyday for around 5 days before I just reinstalled my OS yesterday.
The last (And only) error code I remember before I reinstalled was:

Code:
DRIVER_IRQL_NOT_LESS_OR_EQUAL
So, after also having internet connection issues (Only getting Local instead of Local and Internet) I reinstalled my OS (I have a legit Vista CD).

I installed all drivers from their discs, etc.
I installed "World of Warcraft" (WoW) and "Heroes of Newerth" (HoN).

Everytime I opened WoW, around 30 seconds into playing it would either:

Freeze my computeror freeze the game, then another 30 seconds later freeze my computer
I've only tried to open HoN once but it froze my computer.

I followed some instructions on another site (I Googled my error) and used "Verifier" to force a BSoD.

I got the following error:

Code:
SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
...
STOP: 0x000000C1 (0xFFFFF9800A5D2FF0, 0XFFFFF9800A5D2FFC, 0X0000000000D1000C, 0X0000000000000024)
I ran the "Windows Memory Diagnostics" and it returned no errors during the test.
Please help, this is starting to really get to me and I'm almost like crying every time I freeze up .
EDIT: Apparently I have 90 updates via "Windows Updates".
Installing those now then I'll run the "verifier" test again.

EDITEDIT: After installing these updates, at least one of them is the culprit disabling my internet. After I installed all 90, my... Read more

Answer:BSoD; Error Codes Included.

Got a "screeching" sound for about 5 seconds, then my whole computer just froze.
I had to force restart (Reset button on case) to get my computer working again.

I had this "screeching" problem before I reinstalled my OS.

WHY IS THIS HAPPENING......................................................................

3 more replies
Relevance 45.92%

Hello

I have bought a new HDD for my laptop which had a mechanical fault. I have accidentally installed the 32bit version of Windows 7 on it, and now that I am trying to reinstall Windows, I get BSOD errors. All I need to know is weather if I wipe the disc completely (not using a Windows CD) is that going to allow me to freshly install Windows (unless of course there is a Hardware error). That is all I need to know and that's why I'm not posting the dumps.

The errors occur when after Windows loads files and says 'Starting Windows' after booting from a Windows CD. The errors I get are 0x000000F4 with the first CD and C000021a (0x00000001) with the other.

Thanks

Answer:Various BSOD codes when trying to install Windows 7

Only way to really find out whether wiping the drive will help is to go through with it. If you still have problems afterward, that would likely indicate a hardware issue.

Do you need steps to do a full format, or can you do so on your own?

Do you need steps for backing up data prior to wiping the drive?

1 more replies
Relevance 45.92%

Starting about 2 weeks ago, my computer started to freeze, randomly restart, and getting a blue screen all of sudden.

I first thought formatting the computer will resolve the issue so I formatted the computer on 06/24/2014, but after I formatted the computer and reinstalled the window updates that were suggested by window, it started to give me blue screens again. So I figured this is special issues that needs to be fixed.

I know this is huge favor to ask for. I really do appreciate your time in looking into this matter with me.
I only have a general understanding about software/hardware of the computer and those knowledge is very limited. But I will try my best to follow your opinion and I will try my best to understand and fix the issues on my side too!

Thank you so much for reading this thread! I give my best appreciation to those of who takes their valuable time to look into this problem with me!

I've attached a DM Log file and below is the details of the two errors I've got so far.

1)
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1042

Additional information about the problem:
BCCode: c000021a
BCP1: FFFFF8A004C68780
BCP2: 00000000C0000189
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\WINDOWS\Minidump\062614-26816-01.dmp
C:\Users\Jin Won Lee.JinWonLee-PC\AppData\Local... Read more

Answer:BSOD Randomly getting two different BC codes: c000021a and 3b

Welcome to the forum.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

itecir.sys Mon Mar 9 14:58:47 2009 (49B4DA47)
ITE Consumer IR Driver - EC CIR (PMC) - ITE Tech
Driver Reference Table - itecir.sys

gdrv.sys Fri Mar 13 09:22:29 2009 (49B9D175)
Gigabyte Easy Saver - mobo power utility driver
Driver Reference Table - gdrv.sys

btwl2cap.sys Sat Apr 4 06:28:45 2009 (49D6A9BD)
Broadcom Bluetooth L2CAP Servicen
Driver Reference Table - btwl2cap.sys

CtClsFlt.sys Mon Jun 15 11:06:41 2009 (4A35D6E1)
Creative Camera Class Upper Filter Driver
Driver Reference Table - CtClsFlt.sys

PxHlpa64.sys Wed Jun 24 05:16:35 2009 (4A416253)
Sonic CD/DVD driver (used by many different CD/DVD programs)
Driver Reference Table - PxHlpa64.sys

btwavdt.sys Thu Jun 25 11:50:13 2009 (4A431015)
Broadcom Bluetooth AVDT Service
Driver Reference Table - btwavdt.sys

btwrchid.sys Thu Jun 25 11:51:37 2009 (4A431069)
Bluetooth Remote Control HID Minidriver
Driver Reference Table - btwrchid.sys

risdpe64.sys Wed Jul 1 15:31:57 2009 (4A4B2D0D)
Ricoh PCIe Memory Stick Host Controller
Driver Reference Table - risdpe64.sys

btwaudio.sys Wed Jul 1 19:54:56 2009 (4A4B6AB0)
Broadcom Bluetooth Audio Device
Driver Reference... Read more

4 more replies
Relevance 45.92%

Hi,

This is quite a complicated one, I think. About a year ago, my dad and I decided to update our old household PC. We bought a new motherboard, new processors, new RAM, new graphics card - everything. Since then I've had the occasional BSOD, maybe once a week - never with a regular cause that I can see - and every time decided that trying to sort it out was for another day. Well, today I've had four BSODs, and enough is enough. If hardware information is required, then just say and I'll upload it.

Exception codes are numerous but the most common is 0xc0000005.

Computer information:

- Windows 7 Professional X64
- Full retail
- Hardware setup is roughly a year old.
- If memory serves, the OS has not been re-installed since then.

Answer:Persistent BSOD - various exception codes

  
Quote: Originally Posted by robbro7


Hi,

This is quite a complicated one, I think. About a year ago, my dad and I decided to update our old household PC. We bought a new motherboard, new processors, new RAM, new graphics card - everything. Since then I've had the occasional BSOD, maybe once a week - never with a regular cause that I can see - and every time decided that trying to sort it out was for another day. Well, today I've had four BSODs, and enough is enough. If hardware information is required, then just say and I'll upload it.

Exception codes are numerous but the most common is 0xc0000005.

Computer information:

- Windows 7 Professional X64
- Full retail
- Hardware setup is roughly a year old.
- If memory serves, the OS has not been re-installed since then.



These crashes were caused by a memory exception. Please run these two tests to verify your memory and find which driver is causing the problem.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup ... Read more

1 more replies
Relevance 45.92%

I have run memtest a couple different times without any errors. Have also pulled each stick to see if one was causing problems with no luck.

Any help would be greatly appreciated - thanks!

Home Built
7 Pro x64 - OEM
Hardware is mostly 4 years old - CPU and GPU are 3 years old
Did clean install of OS a couple days ago

Answer:BSOD - random, many different error codes

  
Quote: Originally Posted by M4A1Walter


I have run memtest a couple different times without any errors. Have also pulled each stick to see if one was causing problems with no luck.

Any help would be greatly appreciated - thanks!

Home Built
7 Pro x64 - OEM
Hardware is mostly 4 years old - CPU and GPU are 3 years old
Did clean install of OS a couple days ago


Two causes, One immediate one chronic

Immediate.

Your avast is causing these crashes. Remove and replace with Microsoft Security essentials

http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows
Chronic

Old driver (no really old--from as far back as 2004) that need updating


Code:
SiWinAcc.sys 11/1/2004 2:23:29 PM fffff880`01057000 fffff880`01061000 0x0000a000 0x41868d31
SiRemFil.sys 10/18/2006 5:20:39 PM fffff880`01b9e000 fffff880`01ba6000 0x00008000 0x4536a8b7
nvm62x64.sys 10/17/2008 4:01:06 PM fffff880`0504c000 fffff880`050afd80 0x00063d80 0x48f8fd12
Si3531.sys 2/8/2009 7:58:27 PM fffff880`0117b000 fffff880`011ce000 0x00053000 0x498f7fb3
t3.sys 5/5/2009 9:25:42 PM fffff880`0548c000 fffff880`0552b000 0x0009f000 0x4a00f526
spldr.sys 5/11/2009 11:56:27 AM fffff880`01b5c000 fffff880`01b640... Read more

8 more replies
Relevance 45.92%

So starting a few days ago, my custom build randomly gave me a bsod while playing guild wars 2. Since then, they happen almost every time I boot the computer into normal mode. Now when I boot it up without my wireless usb adapter, everything works fine. Sometimes I can plug it in after everything loads, and it'll read and work fine for a while, but then randomly bsod when I'm in the middle of something. Safe mode with networking seems to be working fine though. I can even boot right into it with the adapter still plugged in. I've been trouble shooting it all day. Diskchk returned no errors. Did an Avast bootscan with no viruses, but when I'd try and do a full system scan it'd BSOD. (even in safe mode.) Ran memtest, and found thousands of errors on one stick, and then ran the other all night and got 9 errors on that one. So new memory has been ordered, and hopefully that will solve most of my problem. I was just wondering if someone could let me know if that's the extent of my issue, or if there's something else I should do.

Thanks in advance! ^^

Answer:BSOD's Multiple Error Codes.

Most likely the ram there, but one thing did catch my attention. The USB ports, whats plugged into them?

7 more replies
Relevance 45.92%

Hello
I have a

Mother Board: M4A88T-V evo/usb (I have checked the capacitors the board looks fine)
Raid Max RX-730SS power supply 720 W (Haven't had any problems however if I try to connect a third HDD with my blue ray, ssd and first HDD my computer wont start)
Main Hardrive Samsung 120 Gig SSD 830 series (This is my third SSD my two other OCZ SSD's died)
Hard Drive One: 1Tb Seagate Baracuda
Hard Drive Two:2 Tb Seagate Baracuda MD001-1CH164
CPU: AMD|PH II X6 1090T 3.2G AM3 RT
RAM:MEM 2Gx2|CORSAIR CMX4GX3M2B2000C9 R

Self build two years ago

I started getting BSOD about a month ago. I thought nothing of a few but then they became more frequent. Eventually my computer was crashing regularly to the point I would be doing work and it was crashing time and time again in a 24 hr period. I noticed that after it crashed I would need to either repair boot or or boot into safe mode before it would boot normally again. But even at that it almost always crashed within a hour or two.
I ran memtest 64+ for 8 passes
and windows memory diagnostic without a single error
I uninstalled avast but nothing changed.
Eventually I reinstalled windows and everything was running fine until I installed skype.
So I uninstalled skype but needed windows fix to do it as I couldn't uninstall without running the fix. The blue screens were not as frequent and generaly I can boot into windows directly after I have one now. But when I run windows debugger it points to ntkrnlmp.exe .T... Read more

Answer:BSOD different codes caused by ntkrnlmp.exe

Hello DrSeuss.

It is caused by Avast.

Code:
fffff880`09beb9b8 fffff880`02c3b581Unable to load image \SystemRoot\System32\Drivers\aswSnx.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.SYS
aswSnx+0x3581
Description here: http://www.carrona.org/drivers/driver.php?id=aswSnx.SYS

Code:
fffff880`09beb398 fffff880`0417bf00Unable to load image \SystemRoot\System32\Drivers\aswSP.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSP.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSP.SYS
aswSP+0x55f00
Description here: Driver Reference Table - aswSP.SYS

Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download and install those, and then run full system scans with both of them, one by one.

Some Disc/file system errors are also there. Do some disc checks.
Update your SSD's Firmware (Skip it, if it is not a SSD)
Re-seat the sata and power.
Run chkdsk /f/r, following the option two of the tutorial Disk Check
Seatool for dos: SeaTools | Seagate download
Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.
As the antivirus faile... Read more

9 more replies