Computer Support Forum

Can't access Firefox, IE (regular mode), can in IE 64bit only

Question: Can't access Firefox, IE (regular mode), can in IE 64bit only

Hi,

I didn't turn my laptop off, which is normal when I'm downloading stuff, I didnt do any updating lately. When I woke up this morning, my computer can't access the internet. I can't log onto Skype, can't access web using IE, Firefox( my regular one used the most), a chines one I sometime use for chinese websites. I have another 2 computers in the house and they both are fine, can access all programs as usual. After using restore point, I reset all firewall( remove all firewall), removed all blocking programs, redownloaded IE and Firefox on another computer and re-install on the one with problem, nothing.

I thought it was network issue. even though it shows 65% connectivity, I tried to reset the router, the whole works, nothing. other 2 computers still fine. I put in my d-link use wireless thing, have connection, websites still cannot be accessed.

I finally tried IE 64 bit, which worked. So I thought, ok, maybe a clitch. i tried other programs again, nothing. For some strange reason, only ie 64 can access the net on this computer now, which I HATE!!!!!

There is no firewalls on router or otherwise. ISP is not limiting, as other computers are fine.

Please, someone advise me what is going on. I can't for the life of me figure what is wrong and I can't stand IE 64 anymore, I need firefox back in my life!!!

Relevance 100%
Preferred Solution: Can't access Firefox, IE (regular mode), can in IE 64bit only

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Can't access Firefox, IE (regular mode), can in IE 64bit only

Welcome to Seven Forums wang14h.

1. Go to start

2. In search box, type cmd , right click cmd.exe, and then click "Run as administrator"

3. Then type:

netsh winsock reset

4. Press enter

5. Restart PC

Hopefully that will fix it

A Guy

1 more replies
Relevance 70.52%

Hello,

After reading some of the more recent posts, it seems I may have a problem similar to the following post "871963-browser-hijacked-keeps-redirecting." I think I was infected about 4 days ago. One night I received an error when logging off my laptop, I think I hit end program so it would shut down, the next day when I turned my laptop on I noticed the problem.

My symptoms include:

-Blue Screen when trying to boot to Safe mode - STOP: 0x0000007E (0xC0000005, 0x80537009, 0xF7AEA508, 0xF7AEA204)
-Windows Media Center not working... when you double click, it does show an instance running in processes, it just doesn't ever open.
-Initially, I was getting redirects in firefox when using google or bing. Now I am getting tabs that randomly open of their own accord.

I too have CA security installed... have always been less than impressed with it's ability to detect and block anything. That's keep the free version of malwarebytes on my computer for backup. However, the current piece of malware infecting my computer has been illusive. In attempt to detect it, I have run the following:

1) CA (of course)
2) malwarebytes - I have a log
3) avira (online CD and rescue CD w/o update)
4) kaspersky (rescue CD w/o update) - free online scan is currently down - I have a log of rescue cd
5) bitdefender & chkrootkit (online quickscan and rescue CD w/o update)
6) trendmicro housecall (online)
7) superantispyware - I have a log
8) GMER - I have a log

Please fi... Read more

Answer:Firefox hijacked, Safe mode won't load but regular will

16 more replies
Relevance 69.7%

Hi! I need help. I can't access desktop in regular mode. Everything freezes. Only mouse is movable and always in busy mode and I can't use keyboard. I can access safe mode only.

My OS is Win7, 64-bit. The last thing I did on comp is that I updated AVAST and boot scanned comp. Since then I can't access desktop.

What can I do?
 

Answer:Can't access desktop in regular mode

Have you tried doing a system restore in safe mode?

If you have and it was not successful, try doing as much of the below in safe mode:

READ & RUN ME FIRST. Malware Removal Guide
 

1 more replies
Relevance 69.29%

I can't access some websites on safe mode & normal mode.I tried accessing it through my moms laptop it goes through but Nod32 says it's a harmful program. But on mine it just says page load error BUT I can visit it through proxy.It's not my dns though I don't think it is.What else can be the cause of this?Can someone help me?

Answer:*HELP* Can't Access Some Websites On Safe Mode & Regular

Oh btw, I use windows vista 32 bit i think and firefox 3 & ie7

please can someone help me. i need this urgent.

5 more replies
Relevance 67.65%

I am having trouble with my internet connection in regular mode on my Acer Espire 15, it connects but says limited access, i have tried reinstalling the network, but still wont work. The internet works fine in safe mode. Wondering if anyone knows how to fix this problem. It is very annoying and I am only able to use the internet in safe mode at the moment. Thanks for any help you may be able to offer...

Answer:internet limited access in regular mode works fine...

In this case, it is recommended to perform a clean boot to check if one or more applications in your computer are causing conflict when you work in normal mode. To know how to perform clean boot and to troubleshoot issues while in clean boot environment, you can refer to the instructions mentioned on the following link:https://support.microsoft.com/en-us/kb/929135 Hope this will help you.

1 more replies
Relevance 66.42%

I somehow got a Trojan on my computer running windows 7, stupid Mcafee some help you are. At first I kept getting a warning that my computer was infected when I tried to access Internet Explorer. So I restarted my computer in safe mode to try to turn off any unneeded processes that could be causing the problem and to do a system restore but the only thing that would come up was my libraries they automatically popped up my music/pictures/video nothing else no desktop background, icons, start menu, task bar... nothing! Thank god I can at least retrieve all my documents and files. Same applied when I tried to just do a regular start up is there anything I can do other than to reformat:cry? This one really has me stumped
 

Answer:Can only access libraries Photo/Video/Documents in safe mode and regular boot

Can you bring up task manager in either safe or normal mode? If you can, you can start a new process and type in explorer. See if that gets your desktop back.

You can try creating this disc and then booting the infected computer to it:
Kaspersky Rescue Disk.
 

1 more replies
Relevance 58.22%

PLEASE HELP!
My internet will not work in regular mode, only safe mode with networking. My trading platform works perfectly in regular mode so I know my connection is ok. I have done HijackThis and have come up with this report..

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 3:19:52 PM, on 10/10/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Safe mode with network support
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Adobe\Acrobat 7.0\Reader\AcroRd32.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Documents and Settings\Big Wayne\Desktop\HijackThis.exe
O23 - Service: Automatic LiveUpdate Scheduler - Symantec Corporation - C:\Program Files\Symantec\LiveUpdate\AluSchedulerSvc.exe
O23 - Service: Canon Camera Access Library 8 (CCALib8) - Canon Inc. - C:\Program Files\Canon\CAL\CALMAIN.exe
O23 - Service: Symantec Event Manager (ccEvtMgr) - Symantec Corporation - C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
O23 - Service: Symantec Internet Security Password Validation (ccISPwdSvc) - Symantec Corporation - C:\Program Files\Norton Internet Security\ccPwdSvc.exe
O23 - Service: Symantec Network Proxy (ccProxy) - Symantec Corporation - C:\Program Fil... Read more

Answer:[SOLVED] Internet explorer will not work in regular mode, only safe mode w/networking

Quote:





Originally Posted by wleger2981


PLEASE HELP!
My internet will not work in regular mode, only safe mode with networking. My Norton is out of date as well, but as soon as I get back up and running I will install a newer version..ANy help on this matter is greatly appreciated..




Please do not post your Hijack this logs here. Due to Forum Rules we cannot assist in malware removal here. Have you tried a different browser (Chrome, Firefox etc)? When you say IE only works in Safe Mode with Networking, Do you mean you boot the computer normally and use IE (safe mode) or are you booting the computer into Safe Mode with Networking? In other words you can't boot normally?
If you feel you are infected, please click on the Virus/Trojan link in my signature and post there for more help.

4 more replies
Relevance 58.22%

Some photos and mail seen only SAFE mode - - but not regular mode in BOTH Internet explorer AND Firefox. Hi for some reason I am no longer able to look at Just SOME photos on web sites on this One Win7 computer, nor See my email in Yahoo main INBOX , , , unless I am in SAFE mode. Not sure how to tell what I did wrong or if missing dlls or other settings. But does work ok just in SAFE mode. However I also get the Blue screen of death once in a while. Below is what I got when doing the "hijack scan" Logfile of Trend Micro HijackThis v2.0.2 Scan saved at 4:09:06 PM, on 4/23/2013 Platform: Unknown Windows (WinNT 6.01.3505 SP1) MSIE: Internet Explorer v10.0 (10.00.9200.16537) Boot mode: Normal Running processes: C:\Program Files (x86)\ASUS\AI Suite II\AsRoutineController.exe C:\Program Files (x86)\ASUS\ASUS Instant On\AsInstantOn.exe C:\ProgramData\FLEXnet\Connect\11\ISUSPM.exe C:\Users\JIMMY\AppData\Local\Akamai\netsession_win.exe C:\Users\JIMMY\AppData\Roaming\SearchProtect\bin\cltmng.exe C:\Users\JIMMY\AppData\Local\Akamai\netsession_win.exe C:\UPS\WSTD\WSTDMessaging.exe C:\Program Files (x86)\ASUS\AI Manager\AsShellApplication.exe C:\Program Files\TRENDnet\TEW-641PC_TEW-643PI\WlanCU.exe C:\Program Files (x86)\ASUS\ASUS Easy Update\ALU.exe C:\Program Files (x86)\ASUS\AI Suite II\EPU\EPUHelp.exe C:\UPS\WSTD\UPSNA1Msgr.exe C:\Program Files (x86)\Nuance\PDF Viewer Plus\pdfPro5Hook.exe C:\Program Files (x86)\Nuance\PaperPort\pptd40nt.exe C:\Program Files (x86)\ControlCent... Read more

More replies
Relevance 58.22%

Hello,
I have this problem with my laptop - sometimes I cannot login - after choosing the user the screen freezes or after logging in it works only for a few minutes in regular mode (I can do things over those minutes like open firefox, but I cannot open folders, sometimes I can open the task manager or even some programs) but then it freezes and I have to shutdown the computer manually by pushing the power button. When I tried pushing crtl+alt+del I got a message "The logon process was unable to display security and logon options when ctrl+alt+delete was pressed. If the operatin system does not respond, press esc or restart the computer by using the power switch". I don't know if this helps, but I try to add as much as I can. Sorry it it's not relevant - my knowledge about computers and IT is minimal.
The computer runs fine in safe mode.
So I tried system restore to a week before when the computer was still fine and it didn't work. So I reinstalled a graphics driver (Intel HD Graphics Driver) as I found on the internet that similar problems got fixed by reinstalled videocard drivers. And it worked, everything started to run smoothly again in the regular mode. As normally I allowed windows updates and after restarting my computer, the problems came back.
I assumed that the problem was the updates so I uninstalled most of them (KB2930275; KB2923961; KB2925418; KB2929755; KB2929733 and KB2918077) but the problem was still there and I was unable to unin... Read more

Answer:Solved: Computer freezes in regular mode but works in safe mode

7 more replies
Relevance 58.22%

Hi all!

Today I started up my computer (an XP machine running SP3) and after it went through the BIOS, it showed the Windows startup screen (the Windows logo with the blue progress bar), but when that was done, it went to a black screen and won't do anything else.

I restarted and tried a few different things; Start Windows Normally, and Last Known Good Configuration both got me the same black screen.

CheckDisk ran, and it made it to the end, but froze when it said "please wait while your computer reboots" ... after waiting more than 10 minutes, i hit reset and tried to reboot it myself. It did the same Bios-Windows-blackscreen thing as before.

I also tried booting into Safe Mode, which DID work, and when I got in there I tried to do a System Restore (two, actually... for two previous dates) but both did nothing to resolve the problem. I tried simply copying my "important" files to my external HD (which it sees), but it won't copy in Safe Mode

When loading in Safe Mode, the driver list pauses and says "press esc to cancel loading of SPTD.sys" but I've tried it both ways and it doesn't make a difference that I can see.

I tried using my XP CD to boot from, which takes me into the Recovery Console, and I chose to hit "R" to repair, but when it asks me what drive I want to login to (which is C:) I don't really know what to do from there. I haven't booted from a CD before, so I assumed it would run a "Repair Wizard&... Read more

Answer:XP won't load in regular mode (black screen), but will in Safe Mode

Just to clarify, I don't really care if the XP installation is fixed, I just want to know if there's a way to get the files off the HD onto an External USB drive. There's gotta be a way... right?

3 more replies
Relevance 58.22%

Hi, I'm having some problems fixing my bleeping computer (Windows 10 desktop computer, to be specific) and could use some assistance.
 
On Friday 15 December 2017, my computer ran fine when I woke up and used it for a few minutes in the morning. Before that date, I had very few problems with my computer running; the biggest issue was some freezing occurring while playing games demanding on processing power such as Civilization 5. However, I don't believe that is related to my current issue, as I last played it on Sunday 26 November 2017, and I had no issues with it on that day.
 
When I returned home later that day (15 December), I found my computer stuck on a blue screen. I'm not sure quite what happened, as my computer was not used during the day at all. I restarted several times, but I was not able to even make it to the user login screen before getting a blue screen. I've received error code 0xc0000142 for every blue screen.
 
Startup repair did nothing to resolve the situation. I am still able to run my computer in safe mode with networking and that's how I'm writing this post. For the past two weeks, I've been using safe mode to use my computer. I've looked online for solutions, but haven't gotten much. I've had some problems in safe mode with random freezes, but at least the computer runs most of the time, although with limited functionality.
 
My research led me to trying Windows + R and opening msconfig.exe and disabling all services that were not... Read more

Answer:BSOD - Computer runs in safe mode, not regular mode

If you work OK in Safe Mode - but not in normal mode, it's most likely a software problem.
Hardware problems are possible, but nowhere near as likely as a software problem.
 
First thing I'd suggest is trying a clean boot.  It's similar to Safe Mode - but works in normal mode by disabling stuff.
It's also similar to disabling the services - but you'll disable more when doing a clean boot.
If a clean boot fixes the problem - then the problem was caused by one (or more) of the things you disabled for the clean boot.
Then it's just a matter of re-enabling things one at a time until you find the problem.
Perform a Clean Boot:  http://www.thewindowsclub.com/what-is-clean-boot-state-in-windows
If that stops the problem, then re-enable things a few at a time until you figure out what's causing it.
Then uninstall the problem program (from Start...Settings...Apps...Apps & Features - if you don't find it there, check the right sidebar for Programs and Features and see if you can remove it from there).
 
Backup your stuff now.  There's no telling exactly what the problem is - so a backup is the best way to be prepared in case the system dies on you suddenly.
 
If this doesn't work, then post back and we'll ask for some reports to try and figure out what's going on.
Good luck!
 

 

1 more replies
Relevance 58.22%

Just a general question:1. When doing a routine scan for viruses and malware, etc. (and just generally speaking), is it better to scan in safe mode or regular mode? 2. If you scan in safe mode, is there anything that wouldn't show up (that you could potentially miss) that *would* show up in regular mode? 3. Or is safe mode just better all around, and everything is covered (plus more) that you'd find with scanning in regular mode?(I'm referring to scanning with AVG A/V, AVG Anti-Spyware, SpyBot (old version), and Ad-Aware SE.)Thanks!

Answer:Better To Scan In Safe Mode Or Regular Mode For Virus/malware?

Safe Mode is a troubleshooting mode designed to start Windows with minimal drivers and running processes to diagnose problems with your computer. This means some of the programs that normally run when Windows starts will not run.The Windows operating system protects files when they are being accessed by an application or a program. Malware writers create programs that can insert itself and hide in these protected areas when the files are being used. Using "Safe Mode" reduces the number of modules requesting files to only the essentials to make your computer functional. This in turn reduces the number of hiding places for malware, making it easier to find and delete the offending files. Using your anti-virus and anti-malware tools, in "Safe Mode" also speeds up the scanning process. Read "Beginners Guides: Windows XP Safe Mode Explained" and "What is 'Safe Mode' used for and why?"

4 more replies
Relevance 58.22%

I have Sonic Stage for my MP3 Player. It worked great. I got the spy sheriff spyware/virus thing and then when I would open sonic stage it would glitch very fast and I could not access anything. In safe mode, the program works perfectly. In regular mode, it continues to do the fast glitching. I don't understand. I removed the virus.

Also, in spybot I continue to get the red SpySheriff and windows explorer registry error, even after I remove it, it continues to show up. Any way I can get rid of this reoccurring error? Any suggestions would be greatly appreciated. Thanks.

Answer:Boot mode/regular mode problem... Think it's related to spyware.

well you never did get rid of it, you still have it. Do you want to work with me to remove it?

9 more replies
Relevance 58.22%

This is a follow up to
http://www.bleepingcomputer.com/forums/topic403398.html

SweetTech just helped me clear out some malware and referred me to this forum when I ran into some interesting issues with Safe Mode:

1. I could not log into safe mode as administrator, it stalled at "getting personal settings". I am able to log on with as my regular user though.

2. In Safe Mode my C drive has 2 Gigs more of free space than in regular mode (is that normal? I though what's on the drive is on the drive no matter what mode I use...)

I have an HP Pavilion Laptop running WinXP SP3.

Many thanks for your input and advice!

Answer:Difference in disk space between Safe Mode and Regular Mode

In Safe Mode my C drive has 2 Gigs more of free space than in regular modeHow are you reading this , or from what program.I think this is only due to being in Safe Mode and in Safe mode you are not using all processes compared to Normal mode.Is the first item an issue for you, then you could have asked S /Tech during her help.Thank You -

7 more replies
Relevance 58.22%

I was shocked when I downloaded TFC.EXE and installed it on my computer AND installed it on my friends computer too from THIS website.now we BOTH have the SAME problem. ha ha I boot to regular mode and nothing works. rightclick on taskbar and then click on taskmanager it stops. doubleclick on AOL or mirosoft update and the hourglass goes around forever. I tried to print something and the printer is gone.I cannot start adaware or avast. sometimes the taskbar loads but most of the time in does not. it is getting worse.. I hope you can help get this thing running.
windows xp home 32bit sp3 thanks again SAL

Answer:runs good in safe mode.nothing works in regular mode

Can you boot into Safe mode with Networking?You said that nothing works. Please offer more description, what does not work? Can you run or install apps?If you can get into safe mode with networking try a boot scan with Avast and post the results. (Make sure that Avast is up to date first)See here if you need help getting to Safe Mode.

11 more replies
Relevance 57.4%

"http://www.bleepingcomputer.com/forums/topic473449.html"
hello. When It is startup up in regular mode I have to move fast, I got it to run sfc /scannow this morning. I tried to system restore but the only restore point is today.the calendar won't to last month. So thats out. still when I double click on a program or internet explorer the hourglas stays there forever. Any ideas would be great.. thanks SAL

Answer:works OK in safe mode but regular mode. nogood

well, thanks anyway. but too late. now I can't do anything in safe mode. There is CDP1 On bottom left of taskbar. When I try to do anything it says An access denied error was retured while attempting to change a service. And also now It says the operation could not be completed due to low memory or harddrive space. I have plenty of both. SAL

6 more replies
Relevance 57.4%

My computer is a HP Probook 4710s running windows xp professional w/ SP3
When I started it up it was very slow, did not make the chiming welcome sound and none of the icons or taskbar came up.
I hit ctrl+alt+del and explorer.exe was there but clearly not doing anything.  Only 21 total processes were running.  I rebooted in safemode and all of my icons appeared.  I tried a system restore but it did not work.  I can reboot in safemode with networking but the following error message appears.  "Runtime Error!  Program  c:\ProgramFiles\Hewlett-Packard\IAM\Bin\AsGHost.exe    This application has requested to terminate in an unusual way. Please contact the applications support team for further infomation."  I had contacted microsoft's tech support who thought the problem might be a corrupted user profile, so we attempted to create a new one and copy the files over to it, but the copy never worked and would fail part way through saying, "cannot access files" and then stop.  So those profiles were deleted and now I'm back to not being able to boot up with just the plain old default ADMIN user.  I don't want to shut down my computer since I'm worried if I do, it will stop booting up in safe mode too.  It's done that before, it cycles through all the files and then hangs up for about 3 minutes and automatically reboots.  Any suggestions?

Answer:Can only boot in safe mode no icons in regular mode

Duplicate, I moved your earlier post to Am I Infected...please pursue that topic and do not start another topic on same issues.
 
http://www.bleepingcomputer.com/forums/t/492515/windows-will-not-start-up-properly-system-restore-not-working/#entry3033303
 
This topic is closed to avoid confusion.
 
Louis

1 more replies
Relevance 57.4%

when i turn my computer on im not able to get on the internet, or access my networking in the control panel. If i go in to safemode with networking i can access the net no problem, just cant figure out why it runs super slow and i cant access the net in regular mode.
 

Answer:my internet is not working in regular mode only in safe mode

something is blocking in normal mode - it could be firewall/security suite

what firewall/security suite do you have ?

moved to networking forum
 

3 more replies
Relevance 57.4%

I started getting BSOD's right after login after boot up. I get a number of different ones and occasionally some repeat. When I come up in safe mode (with and without networking) I can function as long as I don't do too much. I've drive tested my system drive and I also did a memory test. I've also not made any changes recently. If I do too much it will BSOD though. When I start copying files off my system drive to my storage array, I BSOD if I'm doing more than a couple gigs.

I can't seem to get a consistent BSOD. I've listed most of the ones below, I haven't caugh them all.


Any help is appreciated and thank you in advance.Memory Management with Stop 1a
Cache Manager with 0x34 I think
Stop with 0X24
Stop with a 0x7f
Page fault in non-paged area with a Win32k.sys
got 2 more new ones today
special pool detected memory corruption 0xC1
pfn_list_corrupt 0x4E
Going to add new dump in reply here in a bit.

Answer:Different BSOD's upon login in regular mode and in safe mode

Lots of crashes but they are not showing any probable cause.

Do these, as a test:

Free up the startup.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Stop nVidia automatic driver update:
Open nVidia control center.
Help> Updates. It will open the nVidia updates window.
Click the preferences tab.
Uncheck "Automatically check for updates"
Apply > OK.
If the crashes continue to occur after doing these, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip


If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode.... Read more

3 more replies
Relevance 57.4%

I am running vista 64bit after my son in law tried to install a game on my computer it started locking up. I can boot into reg mode and everything is fine for about three minutes, but then it locks up and nothing works except the mouse pointer moves but you can't click on anything or type. When I boot into safe mode with networking everything seems fine, I can get on the internet and do anything you can normally do in safe mode.

Answer:computer freezes in regular mode but not safe mode

Have you tried a system restore yet?

4 more replies
Relevance 57.4%

I RECENTLY PREFORMED SYSTEM RECOVERY ON THIS MACHINE
I AM CURRENTLY USING MY BROTHER'S LAPTOP BECAUSE THE ONE THAT NEEDS FIXING CANT ACCESS THE INTERNET.

# Version of IE (Internet Explorer) - Internet explorer 8
# Operating System - Windows XP service Pack 2
# What you have tried - Calling HP tech support and my ISP(Verizon FiOS) tech support.

# What the problem is - I CANT access websites like google or yahoo or anything with internet explorer even though my ISP is perfectly OK and everything is connected, and it says in network conncections i AM connected to the internet via highspeed LAN/Broadband. I noticed that when i turn my router on and off a message comes up and its says my IP has to be fixed or something. With the FiOS tech support they said i pinged everything fine and that i could go on google and yahoo via the command prompt but for some reason i couldn't in internet explorer. in my internet options i went to connections and i just ticked the auto detect under LAN settings and nothing else.

screen shot: http://tinypic.com/view.php?pic=r216z5&s=5

ALSO when i reboot in safe mode networking i dont even have to do anything it just automatically works in the browser and everythings fine except im in safe mode.

ALSO ALSO i think it somehow is windows media center version or something.. im not positive. when i open CCcleaner it tells me i have windows service pack 2. would media center affect this problem at all?

The HP tech guy said it was ... Read more

Answer:IE works in Safe Mode networking, but not regular mode.

did you try another browser to see if it is a browser issue or something else?

6 more replies
Relevance 56.99%

Hi,

I have recently built a new system but am being plagued by the BSOD. I have run windbg but each time it seems that there are different messages so I thought I would ask if one of you guys would please take a look at the attached dumps.

The system:
Gigabyte GA-X58A-UD3R Rev2
Palit 580GTX nvidia
6Gb Corsair XMS3
Intel i7 980X
Boot drive is a Corsair SSD Force Series 60Gb - Not in a raid but attached to the Intel raid controller
There are 2 other Corsair SSD's in a raid0 on the Intel South bridge raid controller & 2 Samsung HDD's also in a raid0 configuration
X-Fi sound card

No overclocking whatsoever.

I have run HD Tune Pro & the local drive shows no errors.
I will go to bed now & leave memtest running overnight, I ran this for an hour yesterday & nothing came up during that time.

I would be most grateful if anybody can assist.

Many thanks,
Darren

Answer:[SOLVED] Windows 7 64bit regular BSOD

Hello and welcome to TSF.

Bugchecks vary, but there is noticably a 0x24 - indicative of file system corruption or hard drive failure, which would also explain the reason for the variety of bugchecks. Open an elevated command prompt (Start>type cmd>Run as administrator) and enter the command chkdsk /r. The scan can take quite some time, but it won't be long at all if run on the SSD. It should, however, be run on all partitions. To run it on separate partitions, enter the command chkdsk X: /r, where X: is your drive letter.

Check all of the drives and let us know how it works out. Good luck to you.

Devin

3 more replies
Relevance 56.58%

My mother and I share a network, and both own Compaq Presarios from the dark ages . She is running XP and I'm running 98. I caught a virus (pretty sure it's Virtumonde) and I'm taking steps to deal with it. This is not about my problem... unless it's her problem, too.

She recently bought a laptop (which runs Vista) and is networked into the same system. For this laptop, she purchased ESET NOD32 Antivirus4. When she heard about my problem, she thought that it might be a good idea to install this same program to her PC before I reattached to the network to fix my problem. So we did that. Unfortunately, we didn't heed the extremely mild warning that there "may be conflicts" with the McAfee already on her system, and neglected to uninstall it.

As soon as I was finished with the uninstall, I attempted to enter the Add/Remove Programs menu to remove McAfee. It told me to wait while it populated the list, and ten minutes later, I gave up. The computer had frozen, so I did a hard shut down... and have not been able to do anything since!

We can restart it, sure, but it freezes somewhere between the time it launches McAfee and the time it launches Eset - any attempts to do anything either fail or cause the freeze. We of course tried booting in safe mode, but cannot get the options screen (we tried the tapping and holding methods for both F8 and F5).

Incidentally, her computer's symptoms do not resemble mine in the slightest.

So here are my que... Read more

Answer:No safe mode, regular mode crashes

As soon as I was finished with the uninstall, I attempted to enter the Add/Remove Programs menu to remove McAfee.Do you mean "As soon as I was finished with the installation, I attempted to enter the Add/Remove Programs menu to remove McAfee." ?-----------Safe Mode: After you press the ON button, start tapping the F8 key ... and keep tapping .... until you are presented with the "Windows Advanced Options Menu". Try that please.Try F10 if no luck with F8.

5 more replies
Relevance 56.58%

when i boot my laptop in safe mode my internet speed is high but when i boot in regular mode its low im wondering if anyone can help me with stopping the right programs for regular mode so my internet speed is high like it is in safe mode
 

Answer:booting in safe mode and regular mode

6 more replies
Relevance 56.58%

Here is the HJT log along with the active scan result

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 11:44:15 AM, on 4/29/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16640)
Boot mode: Safe mode with network support

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Webroot\Spy Sweeper\SpySweeper.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\WINDOWS\system32\ctfmon.exe
C:\WINDOWS\system32\NOTEPAD.EXE
C:\WINDOWS\system32\NOTEPAD.EXE
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.yahoo.com
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Bar = http://us.rd.yahoo.com/customize/ie/...ch/search.html
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.yahoo.com/
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant = http://mi... Read more

Answer:I can get online insafe mode but not in regular mode

Can anybody please lead me in some direction?

1 more replies
Relevance 56.58%

why?!?!? i tryed a lot of stuff but nothing ever works

Answer:why can i go on the internet in safe mode but not in regular mode?!?!?!?

You might be experiencing a sever infection or a system corruption ( the files that dont run in safe mode but real mode might have been corrupted such as drivers ) but these are all assumptions right now. Please get into safe mode with networking. Click on greyknights link below and follow the instructions for a malware clean-up. Get a hjt log and post it under hjt log help forum. Lets see what happens. Let us know.

regards.

5 more replies
Relevance 56.58%

We had a power outage recently and even though the backup kicked in, our MS Outlook 07 (running on XP Pro) will only open in Safe Mode with limited features. When I reboot, I get an error message saying Outlook wasn't closed properly. It will not load at all unless I click on the offer to operate in safe mode. How do I get the system to function normally in regular mode with full features again? I'd appreciate any how-to help anyone can provide. THANKS!
 

Answer:Outlook 07 Safe Mode vs Regular Mode

Reinstall. It has been too badly damaged. Your settings have been preserved as has your mail, in most cases... but it is still wise to use Outlook recovery software (see www.majorgeeks.com and others) before you perform the reinstall... your files in process at the time of the failure are likely lost.
 

6 more replies
Relevance 55.76%

Hi,
I have been experiencing BSOD errors for some time now on my DELL Inspiron 580, and I am assuming that it is one or more incorrect/out of date drivers that are causing this issue.

I can see the BSOD errors when I log back in, for example:
---------------------------------------------------------
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 6153

Additional information about the problem:
BCCode: 4a
BCP1: 000007FEFD94BC3A
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF88006FB8520
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\123010-17721-01.dmp
C:\Users\Noel\AppData\Local\Temp\WER-34866-0.sysdata.xml
---------------------------------------------------------
but I cannot read the .dmp files produced.

I have attached 2 examples of the .dmp files incase they might reveal different issues.

Please can someone review them and provide me with some guidance/direction as to what the problem might be?

Much appreciated and thanks in advance,

Regards,
Noel

Answer:Windows 7 Home Premium 64bit Regular BSOD Errors, please help.

  
Quote: Originally Posted by noelkelly73


Hi,
I have been experiencing BSOD errors for some time now on my DELL Inspiron 580, and I am assuming that it is one or more incorrect/out of date drivers that are causing this issue.

I can see the BSOD errors when I log back in, for example:
---------------------------------------------------------
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 6153

Additional information about the problem:
BCCode: 4a
BCP1: 000007FEFD94BC3A
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF88006FB8520
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\123010-17721-01.dmp
C:\Users\Noel\AppData\Local\Temp\WER-34866-0.sysdata.xml
---------------------------------------------------------
but I cannot read the .dmp files produced.

I have attached 2 examples of the .dmp files incase they might reveal different issues.

Please can someone review them and provide me with some guidance/direction as to what the problem might be?

Much appreciated and thanks in advance,

Regards,
Noel



Hi Noel
Both of these were caused by USB

One the USBPORT.sy and one USBehci.sys. Both part of the OS.

I would run a system file check to verify and repair them.
SFC /SCANNOW Command - System File Checker

There may be more USB problems but these are the easiest to fix so we should do them first.

Ken J

9 more replies
Relevance 54.94%

Hey guys. So all of a sudden my Google Chrome stopped working. I mean I was using it fine then five minutes later it kept giving "error 102 connection refused" instantly as if it wasn't even attempting to load anything. I can browse the web in Firefox but even then I can't do anything regarding secure sites. Also I'm completely unable to update or install any software that requires a connection despite my connection obviously working (since I'm posting this).

Chrome seems to work in safe mode with networking but AVG is still unable to install as it keeps saying I require an internet connection. Also my laptop which uses the same connection appears to work perfectly. I'd like to think it was a Chrome only issue but I'm unable to view https pages or update software regardless of what browser I'm using. Really baffled and frustrated

Using XP and SP3.

I've tried the following:

- Checking hosts file
- Winsock fix
- Releasing/renewing IP
- Malware etc scans
- Rootkit scans
- Disabling any firewall/antivirus while making sure Chrome is a trusted app
- Ensuring that the browser settings are set to automatically detect instead of connect via a proxy
- Router is not blocking anything
- Uninstalling/reinstalling Chrome

Here's a HijackThis log if it helps:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 10:44 PM, on 07/11/2010
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
B... Read more

Answer:Only Firefox displays pages while in normal mode but won't access secure sites

Make sure you have the correct date and time on your computer.

If no luck,

Read THIS.
 

1 more replies
Relevance 54.53%

hello, my computer's screen froze the other day and now when I turn it on again it tells me that it didn't shut down properly. Gives me the options of continuing on safe or regular mode. What should I do?? how do I get it back to normal?

Answer:safe mode or regular mode??

Boot to Safe Mode, then shut down normally, then boot to normal mode.
While in Safe Mode you can attempt to troubleshoot the issue, and in Safe Mode with Networking you can even update your drivers (such as your video drivers).

2 more replies
Relevance 52.89%

Hello.

I have booted up into regular mode with my user account and as an Administrator. Desktop icons load slowly (placeholder icons load right away, but the specific icons for the items load 1 evrey 5 seconds). I get a message about Zone Alarm being expired (not part of theproblem, but letting you know it executes Zone Alarm just before the BSOD occurs).

Safe mode is fine (I have even tweaked the registry to have sound during safe mode). Safe mode sucks though.

I have attached the 3 BSODs. I haven't analyzed them myself yet.

Thank you.

It says invalid file when I try to upload the BSOD dump files.

I will get a smaller dump and attach.

Answer:Win 7 regular mode BSOD

Uninstall Zone Alarm and use the Windows Firewall instead. Zone alarm is known to cause BSOD.

1 more replies
Relevance 52.89%

My computer which is running on Windows Xp will not boot up properly in regular mode. It will only boot up in safe mode. When I try to boot in regular mode, it will not give me a start menu, task bar or desktop icons. I try to ctl-alt-del, however that does not work either and I have to shut down the power on my computer.

I ran the diagnostic tools that you stated to run and have attached the attach.txt file and the dds.txt file. However, when I run the gmer program as instructed, it will run for about 10 minutes and then bring up the following message: "Warning! GMER has found system modification caused by rootkit activity." After pressing OK, the scan no longer proceeds and GMER does the same thing try after try. I have also made sure that all programs are closed before running GMER.

Please help as I would like to try to avoid re-installing Windows if I could.

Thanking you for your help in advance.

Answer:Computer not able to run in regular mode

DDS (Version 1.1.0) - NTFSx86 NETWORK
Run by Owner at 11:31:21.92 on Sat 01/03/2009
Internet Explorer: 7.0.5730.11
Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.1023.698 [GMT -5:00]

AV: AVG Anti-Virus Free *On-access scanning enabled* (Outdated)

============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
svchost.exe
svchost.exe
C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Documents and Settings\Owner\Desktop\Downloads\dds.com

============== Pseudo HJT Report ===============

uStart Page = hxxp://www.whatwashomepage.com/?q=http://www.google.com/
uSearch Page = hxxp://www.google.com
uSearchMigratedDefaultURL = hxxp://search.yahoo.com/search?p={searchTerms}&ei=utf-8&fr=b1ie7
uSearch Bar = hxxp://www.google.com/ie
uInternet Settings,ProxyOverride = 127.0.0.1
uSearchURL,(Default) = hxxp://g.msn.ca/0SEENCA/SAOS01?FORM=TOOLBR
mSearchAssistant = hxxp://www.google.com/ie
BHO: {02478d38-c3f9-4efb-9b51-7695eca05670} - Yahoo! Companion BHO
BHO: Adobe PDF Reader Link Helper: {06849e9f-c8d7-4d59-b87d-784b7d6be0b3} - c:\program files\adobe\acrobat 7.0\activex\AcroIEHelper.dll
BHO: AVG Safe Search: {3ca2f312-6f6e-4b53-a66e-4e65e497c8c0} - c:\program files\avg\avg8\avgssie.dll
BHO: Spybot-S&D IE Protection: {53707962-6f74-2d5... Read more

1 more replies
Relevance 52.89%

Hi i have been having problems with my 5 year old computer for maybe 6 months, and I have some serious problems with it. One problem is, when the computer started up, it makes this click noise, like someone pushing a button. Me being a complete amatuer, ignored it until finally it totally effed up my computer. My computer wont go into windows xp, it wont even go to safe mode. I can only go to the system restore screen, and i cant even restore my computer since it says " cannot format user portion !" Any help?

I already have all my info stored on a network, so i dont mind like wiping it totally clean, I really just want to delete some stuff on there. (some games and some programs, cuz of serials) please help^^
 

Answer:No safe mode, No regular

That clicking noise is probably a sign your hard drive took a dive, along with your symptoms, and you need a new one.
 

2 more replies
Relevance 52.89%

Hello Brink you have helped me out in the past and I was hoping you could see it in your heart to help me again my laptop a lenovo y 570 that was running win 7 sp1 home premium has started to have an big issue I cant get in to safe mode and cant boot in to normal mode either! I don't not have an original windows disk just a usb bootable flash drive with a torrent of win 7 sp1 home premium and a Window 8.1 original 64 bit install disk my friend said I could use the win 8.1 disk to reset my laptop or to repair it or restore it and it amazingly enough did have those options but it has told me it was locked when I tried to reset it and I cant remember the password any way not that it gave me that option but I also tried to restore it to an earlier time and it said there was a partion missing that is required to restore it im just stumped All it will do wont get passed the windows sky wallpaper when it trys to boot please help!

Answer:Cant get into regular mode or safemode!

I found a year old system image that I am trying to restore to right now it is looking like it just might load all the way I hope so!

1 more replies
Relevance 52.48%

hi..
im totally lost.
my system is not working properly.cant shutdown or restart in regular mode.
cant install any new software,its saying no administrator rights but i logged as administrator only.even internet is not working.But everything is working fine in safe mode.i scanned my system using kapskersky antivirus,spybooster and deleted a lot of trojans.
:-(..still no luck.can anybody tell me how to solve this without formatting my system??

Answer:internet is not working in regular mode

Hello and welcome to TSF.

We want all our members to perform the steps outlined in the link given below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Please note that the Virus/Trojan/Spyware Help forum is extremely busy, and it may take a while to receive a reply.

1 more replies
Relevance 52.48%

Hello. I have a acer aspire 362p-2900. My internet works fine in safe mode (wireless) but, wont work in regular mode....in the bottom right it says "local and internet" with the globe and two computers.....ive tried all i can think off. Please help.
 

Answer:Internet not working in regular mode

My top suspect is a firewall misconfigured or corrupted.
 

1 more replies
Relevance 52.48%

Hi Guys,

I'm having a problem with my Dell Inspiron 9300 laptop, which is running Windows XP as the OS. It only boots in safe mode, vga mode, and so on. It will not boot in regular mode. I turn the computer on and I see the Dell logo and then the Windows XP logo (splash screen) during start up, but after that the screen just goes blank (i.e black screen).

I did system restore to an earlier point when I wasn't having this problem and that didn't work. I uninstalled the driver for the graphics card (nvidia geforce go 6800) and reinstalled it, but that didn't fix the problem either. Also, when I tried reducing the size of the icons in safe mode back to the normal size, I got the black screen.

This problem just started yesterday and the computer works fine in safe mode. Any help and assistance will be greatly appreciated, thanks.

Edit: I'm going through the site now to see if a previous thread or one of the stickied posts can help me resolve this problem.

Double Edit: I went through this thread:

http://www.bleepingcomputer.com/forums/topic138692.html

and it seems that I've already tried all the methods recommended here. I'm hoping I don't have to get a new video/graphics card.

Again, any help on this topic would be tremendously appreciated.

Answer:Laptop Won't Boot in Regular Mode

Let's try a clean boot please:
Open msconfig and on the General tab choose "selective startup" (uncheck all three items) and reboot. Does the problem still occur? If not, start adding items back to msconfig one or two at a time, rebooting after each change, until the problem reappears and you'll have identified the offending process. This is clearly a time consuming procedure, but it is the best way to determine if some process loading with the system is the cause of your problem.
After you've isolated the cause, do not use msconfig to permanently disable the process. Instead, if it is a service go to START - RUN and type: services.msc (then press enter) and disable the service OR, if it a program, you can download & run a simple app such as Mike Lin's Startup Control Panel (http://www.mlin.net/StartupCPL.shtml) to enable, disable, or otherwise manage startup programs.

21 more replies
Relevance 52.48%

hi..
im totally lost.
my system is not working properly.cant shutdown or restart in regular mode.
cant install any new software,its saying no administrator rights but i logged as administrator only.even internet is not working.But everything is working fine in safe mode.i scanned my system using kapskersky antivirus,spybooster and deleted a lot of trojans.
:-(..still no luck.can anybody tell me how to solve this without formatting my system??
 

More replies
Relevance 52.48%

I purchased aan estimating program that runs in safe mode but NOT in regular mode. What gives??

Answer:runs in safe mode but not in regular

Why not send it back?See event logs for clues. 1/3 of highway deaths are caused by drunks. The rest are by people who can't drive any better than a drunk.

2 more replies
Relevance 52.48%

Hi all,

We were recently having issues with the new versions of Silverlight. My girlfriend tried to download an older version. Apparently the sight she tried to download it from was rogue. I tried to uninstall it (Silverlight) without success. I thought if I went into safe mode, I might be able to get rid of it that way. However, I was not able to boot into safe mode. The computer just went to black screen. I was able to reboot in normal mode by turning off the computer and restarting so I went into msconfig and checked the system boot box in an effort to force reboot in safe mode. Now it wont boot in normal or safe mode. (black screen) If i could uncheck the system boot box, the computer would not be trying to boot into safe mode, so it seems Iím stuck there. Any thoughts?
 

More replies
Relevance 52.48%

Hi,
 
I think I may be infected or something. My computer won't open in regular mode, it's eventually goes to a black screen. However I can open in Safe Mode. Any ideas if this is an infection or just a malfunction with the lap top?
 
Thanks,
Ted

Answer:Won't let me open regular way, only in Safe Mode

Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2 SecurityCheck may produce some false warning(s), so leave the results reading to me. Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeList Restore PointsClick Go and post the result. Please download Malwarebytes Anti-Malware to your desktop.NOTE. If you already have MBAM 2.0 installed scroll down.Double-click mbam-setup-2.0.0.1000.exe and follow the prompts to install the program.
At the end, be sure a checkmark is placed next to t... Read more

15 more replies
Relevance 52.48%

Whenever I try to boot into xp, one of two things happens.
I try to boot into normal mode or last known good config, and it goes to the login screen, I click on my account, it shows just the desktop, no icons, just the wallpaper, and then goes back to the login screen.
This repeats everytime I click on my account login.

When I try to boot it into safe mode, it flashes something about realtek boot and asks me to hit shift and some other variety of keys but then it disappears as soon as I have a chance to fully read it, it just loops back to the mode select screen, I don't even get to the login screen.

What should I do?
 

Answer:can't boot into regular or safe mode

9 more replies
Relevance 52.48%

Hi,
I recently have had a problem logging into vista. If I try normal mode, the screen either stays black and does nothing, or on a rare occassion it will go to my login page and once my password is entered, just spin on welcome and do nothing else. I can login in safe mode, and can also login in safe mode with networking, which is what is allowing me to post this question for help. I have no clue as to what to do, and was wondering if anybody could help me figure out what the problem is, or figure out how to fix it. It was suggested to me to download autoruns, which I did, but I have no idea how to read the results, or what to do with them. I will include the autoruns scan, so maybe someone knows how to read it, or how to fix it.

Answer:Cannot load vista in regular mode

Uninstall norton

ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

Try to boot into normal mode,if that doesnt work try a clean boot

http://www.askdrtech.com/solutions/post/How-to-perform-a-clean-startup-%28clean-boot%29-in-Windows-7.aspx

If that doesnt work,create a new user account and try to boot into it

good luck

1 more replies
Relevance 52.48%

I have Vista and I powered down one day and now when I try to boot up, it stays on the loading screen with the moving bar. It boots up in safe mode but not regular. I even tried reinstalling windows and cleaning the HD with a complete installation and it boots up the first time, but when I try tried to enable the ethernet card, it would stay on Enabling. I then powered off and it did the same would only stay on the loading unless I booted in safe mode. I don't know if it is a virus in the boot system or something. Please help I can't boot up windows in regular mode even after reinstalling windows. Thanks for your help.

Answer:Please help, Windows will not boot in regular mode

If you say it happens when you try to install drivers for your network card (assuming this is what you meant when you said 'enable the ethernet card'), I'd say look for more updated drivers for your ethernet card than what you're trying to use.

3 more replies
Relevance 52.48%

I woke up and my monitor wasn't working

on the screen, it'll just show "digital" for a few seconds, then switch to "analog" and it'll continue to switch back and forth. I tried powering the monitor on and off, and restarting the computer. no luck.

however, if I go into safemode, everything works just fine.

it's a Samsung Syncmaster 910t. any help would really be appreciated
 

Answer:lcd works in safe mode, not regular. help !

in safe mode windows uses a vga driver - maybe you have a problem with the video driver.
have you checked the device manager in safe mode.
you may want to try updating the driver - and/or display driver
 

1 more replies
Relevance 52.48%

My computer worked fine one day, the next day it started acting up without my downloading anything in the meantime. I can boot up in safe mode and everything works and I can access the internet, but when I restart in regular mode, none of the icons will open the programs, the buttons don't work, the touchpad does not work and the cursor eventually freezes with the little circle going round and round. I can reboot in safe mode with networking and everything works just fine. I transferred most of my files to an external hard drive, run Avast, run AdAware, downloaded Malwarebytes which found two Trojans which I deleted, eventually downloaded Combofix from your site and ran that. Nothing has cleared up the problem. I tried uninstalling some programs and got the message that Windows installer could not be accessed. So I downloaded Total Uninstall and was then able to uninstall them. I cannot run System Restore as I get the messaage that I have no restore point. When I go to system protection I see no prompt to create a restore point. I continually run my anti-virus programs and get no malware detected. I am running Vista Home Premium with Service pack 2, 32 bit. Any suggestions would be appreciated.

Answer:Nothing responds in regular boot mode

Hello

I would like to provide you with some help, but first can you confirm that a faulty HDD is not causing the problems ? Or maybe the trackpad driver?

Can you also provide me with some more information on your machine?

3 more replies
Relevance 52.48%

My computer will not run properly when started up in regular mode. It runs just fine if I start it up in Safe Mode with Networking. Here is my HJT Logfile:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 4:22:59 AM, on 12/8/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16735)
Boot mode: Safe mode with network support

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Internet Explorer\iexplore.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe
C:\WINDOWS\system32\rundll32.exe

R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch =
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,First Home Page = http://www.dell.com
R1 - HKCU\Software\Microsoft\Internet Connection Wizard,ShellNext = http://go.micr... Read more

Answer:Computer does not run correctly in regular mode...

Please follow the instructs from this webpage (sticky):

http://www.techsupportforum.com/secu...oval-help.html

You shall have a proper set of logs for us after that. Someone shall be along shortly

* Kindly note that threads without the proper logs is likely be ignored.

2 more replies
Relevance 52.07%

Greetings,

I have used Firefox for years. Now it keeps crashing. I also keep getting a message that: "The Adobe Flash Plugin has crashed. ."

Any thoughts?

Thank you.

Smorton

Answer:Firefox Crashed on a regular basis.

Firefox just crashed again. I took the info:

AdapterDeviceID: 0x6811
AdapterDriverVersion: 13.152.0.0
AdapterSubsysID: 0b041002
AdapterVendorID: 0x1002
Add-ons: web2pdfextension%40web2pdf.adobedotcom:2.0,support%40lastpass.com:3.1.1,artur.dubovoy%40gmail.com:7. 2.4,mozilla_cc%40internetdownloadmanager.com:7.3.99,%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:37.0.2
AvailablePageFile: 45240213504
AvailablePhysicalMemory: 20297908224
AvailableVirtualMemory: 2675916800
BIOS_Manufacturer: Dell Inc.
BlockedDllList:
BreakpadReserveAddress: 71958528
BreakpadReserveSize: 67108864
BuildID: 20150415140819
CrashTime: 1430403464
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1429877041
Notes: AdapterVendorID: 0x1002, AdapterDeviceID: 0x6811, AdapterSubsysID: 0b041002, AdapterDriverVersion: 13.152.0.0
D3D11-WARP? D3D11-WARP- D2D? D2D1.1? D2D1.1+ D2D+ DWrite? DWrite+ D3D11 Layers? D3D11 Layers+ WebGL? EGL? EGL+ GL Context? GL Context+ WebGL+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 32108
StartupTime: 1430397239
SystemMemoryUsePercentage: 21
Theme: classic/1.0
Throttleable: 1
TotalPageFile: 51435409408
TotalPhysicalMemory: 25718652928
TotalVirtualMemory: 4294836224
URL: Internet Download Manager - the fastest download accelerator
User32BeforeBlocklist: 1
Vendor: Mozilla
Version: 37.0.2
Winsock_LSP: MSAFD Tcpip [TCP/IPv6] : 2 : 1 :
MSAFD Tcpip [UDP/IPv6] : 2 : 2 ... Read more

9 more replies
Relevance 51.66%

I can't start up the pc at all,

1. when starting the pc
We apologize for the inconvenience but windows did not start successfully. A recent hardware or software change might have cause this. Start in :
safe mode
safe mode with networking
safe mode with command prompt
last known good configuration
start normally

doesnt matter what i do I get a black screen with windows logo and the scrolling thingy(the first thing that comes up when it boots normally) and within about half a second it automatically shuts down and restarts.
------------------------------------------------------------------------------------------------------------------------------------------------------
2. if I do F-10 system recovery i get this error message:

The section IDA_CREATE_USER_DRIVE_U does not contain a valid dialog template. after I lick OK it shuts downs and restarts the pc again
------------------------------------------------------------------------------------------------------------
3. if I do Microsoft Windows Recovery Console

A problem has been detected and windows has been shut down to prevent damage to your computer.

If this is the first you've seen this stop error screen (more like the 31st :|) restart your computer. If this screen appears again, follow these steps:
Disable/uninstall anti virus, disk defragmentation, or backup utilities,. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK/F to check for hard drive corruption, and the restart ... Read more

Answer:computer won't start in regular/safe mode

System manufacturer and model?

Louis

10 more replies
Relevance 51.66%

Hey guys,

I know this has been outplayed over and over again but I was hoping someone could help me in my particular case. I have just updated to Windows 7 Ultimate 64bit this morning, and now I am having issues connecting to the internet. Actually it seems to connect fine (opens Windows Messenger and everything) but says Page Cannot Be Displayed if I try and open something in Internet Explorer. I searched a few forums and found that I should try it in Safe Mode and voila it worked. The other forums stated that that usually means that I have some 3rd party software blocking my connection...but how do I find out which one it is?

Answer:Internet working in safe mode but not in regular

Try this

If it works we can find the cause, if it does not its a driver

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

3 more replies
Relevance 51.66%

I've gotten various errors such as "machine check exception" and "uncorrectable hardware error" and 0X0000009C as well as 0X00000005 and 0X00000124 and others. I tried reseating the ram and cleaned dust from the motherboard and heat sink in case there was any overheating and now I can't even get anything to show up on the monitor at all (and I did check the monitor connections)

Any ideas would be appreciated, thanks !

Tags: windows vista, vistax64, tai game, doc truyen ngan

Answer:Vista can not boot in either regular or safe mode

I think this should explain what the error means-

https://msdn.microsoft.com/en-us/lib...(v=vs.85).aspx

Not much help in regards to which component it is. If you could see the POST, that would be helpful.

1 more replies
Relevance 51.66%

I am unable to get this system to Boot into Safemode.

The following erroer pops up on the screen:
Isass.exe - Application Error
The application failed to initiater properly (0x0000142). Click OK to terminiater the application.

If I click OK all I get is a black screen!
 

Answer:Windows XP will not boot either safemode or regular mode

Have you tried Last Known Good Configuration?
You also need to mention the brand and model of computer.
Do you have any restore disks or a windows disk?
 

11 more replies
Relevance 51.66%

Trying to help out my girlfriend with her computer. It will not run properly when started up in regular mode. Here's a quick list of some of the things that do not work properly:

*The computer (and all subsequent programs) will not connect to the internet.
*Internet Explorer windows will not pop up when the program is started (but IExplore will show in the taskmanager).
*AVG will not show any windows or any signs of functioning in the taskbar (but will also show in the taskmanager).
*Anytime I try to get the contents of 'My Computer' to show in a window, that window freezes.
*HijackThis will start just fine, but when I click scan it freezes.

And oddly enough, the computer runs just fine if I start it up in any sort of Safe Mode; including Safe Mode with Networking (yes, internet works fine). The only problem with Safe Mode, is that AVG will not start. So, I cannot update,scan, or repair any potential problems. I have followed all of the instructions from the "sticky" to the top of this forum. I attached all of the requested files. Here are the results of the DDS scan:

DDS (Version 1.1.0) - NTFSx86 NETWORK
Run by Administrator at 0:40:16.03 on Mon 12/22/2008
Internet Explorer: 7.0.5730.11
Microsoft Windows XP Home Edition 5.1.2600.2.1252.1.1033.18.254.156 [GMT -5:00]

AV: AVG Anti-Virus Free *On-access scanning enabled* (Updated)

============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\W... Read more

Answer:Please help, computer will not work properly in regular mode...

Hello and Welcome to TSF.

Please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.

Please note that the forum is very busy and if I don't hear from you within three days this thread will be closed.

------------------------------------------------------

Please visit this webpage for download links, and instructions for running ComboFix:

http://www.bleepingcomputer.com/comb...o-use-combofix

* Ensure you have disabled all antivirus and antimalware programs so they do not interfere with the running of ComboFix.

Please post the C:\ComboFix.txt in your next reply for further review.

------------------------------------------------------

19 more replies
Relevance 51.66%

The BSOD states:
A problem has been detected and windows has been shut down to prevent damage to your computer.
Tech Info:
STOP: 0x0000007B (0xF789E524, 0xC0000034, 0x00000000, 0x00000000)

I had a number of infections that spybot and malwaybytes found and fixed, McAfee didn't find anything. I kept looking around for some of my same issues that still persisted, all files hidden, administrator tools empty, cannot run a system restore. I came across your forum that referenced one of my issues and I downloaded combofix, ran it and while it was running the BSOD came up. I tried to reboot in safe mode but still receive BSOD.

At this moment I am runnig ckdsk /r from the recovery console.

I orginally posted in malware forum but I think I need to resolve the boot issue before I can address any malware issues, is that correct?

Any help would be greatly appreciated.

OS:XP
 

Answer:BSOD cannot boot in regular or safe mode

If the chkdsk doesn't help which it might.

7B is often associated with SATA drivers. If you can find your SATA configuration in BIOS, it might be worth a try to set it to ATA or IDE emulation.

If you give the model of computer or motherboard we might be able to figure out where the setting would be in BIOS. Usually it is under Drives or something like that.

I'm not sure that the setting switch on a running OS will help but it couldn't hurt to give it a quick try.
 

12 more replies
Relevance 51.66%

all I get is an LED on the mother board that flashes green every 2 seconds. I look at the mother board manual and it tells me im in normal suspend mode and it dosent tell me how to get out normal suspend mode.

More replies
Relevance 51.66%

i am only able to login to safe mode with command prompt as administrator and it took forever at the loaded stuff screen then it only popped up cmd and the desktop background so i had to try to open a file so i could get to the windows does not recognize this program then i went to browse then the taskbar popped up with the desktop icons
i currently dont have any system restores as i tried to restore once this worked
and i dont have a windows xp cd but i have a key
and i dont have recovery console installed
 

Answer:cannot login to any accounts normally or in regular safe mode

16 more replies
Relevance 51.66%

Hi all!

I seem to be having a problem where, whenever I start up my computer, I can log in, but just as it starts to load the desktop, it switches to a blue error screen with the error, "driver_irql_not_less_or_equal". The technical information is, "STOP: 0x000000D1(0xE24B6000,0x00000002,0x00000000,0xF2095A4B)"

The computer seems to work in safe mode, however.

This error could (possibly) have something to do with a few viruses malwarebytes recently removed. The problems seemed to oly start after the viruses were removed, though that might only be a coincedence. I have included the malwarebytes log just in case.
Malwarebytes' Anti-Malware 1.39
Database version: 2542
Windows 5.1.2600 Service Pack 3

8/1/2009 7:09:17 PM
mbam-log-2009-08-01 (19-09-17).txt

Scan type: Quick Scan
Objects scanned: 157551
Time elapsed: 13 minute(s), 40 second(s)

Memory Processes Infected: 0
Memory Modules Infected: 0
Registry Keys Infected: 5
Registry Values Infected: 1
Registry Data Items Infected: 3
Folders Infected: 1
Files Infected: 5

Memory Processes Infected:
(No malicious items detected)

Memory Modules Infected:
(No malicious items detected)

Registry Keys Infected:
HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Ext\Stats\{286285b1-a276-436b-be9c-b01d1fe9cbbb} (Password.Stealer) -> Quarantined and deleted successfully.
HKEY_USERS\.DEFAULT\SOFTWARE\Microsoft\Windows\CurrentVersion&... Read more

Answer:Computer won't run in regular mode and gives me an "driver_irql_not_less_or_equal" error

In Safe Mode, right click on the C drive in Explorer and go Properties > Tools > Check Now (under Error Checking). Check both boxes then click "Start Now". A message will pop up saying that Error Checking will run after you restart the computer. Restart the computer and Error Checking will run automatically after the restart. After it?s finished it will restart into Windows automatically.

59 more replies
Relevance 51.66%

Hi, my T530 has recently starting giving me trouble rebooting in regular mode. Whereas I can reboot in safe mode, I do not even reach the initial login screen when I attempt to start-up regularly. All I get is a black screen with a visible cursor. Any ideas where this is coming from and what problems I have?

Answer:Thinkpad T530 not starting in regular mode

Most likely a bad driver since in Safe Mode windows uses generic drivers.   My guess would be the video driver, so while in Safe Mode, use device manager to uninstall the existing video driver and start clean. Right click on Start and select Device Manager or Start >> Run and type: devmgmt.msc  and press EnterClick on Display Adapters to openRight Click on the Intel HD Graphics and select Uninstall,  making sure to check the box to "Delete the driver software for this device".RebootIf it was the video driver, then Windows should boot normally using a generic driver, and then download and install a new driver via Windows Update. Since it just started, running a disk check (chkdsk) would be a good idea too.Right Click on Start and select Command Prompt (Admin) and press EnterIn the Command Prompt (Admin) window, type:   chkdsk C: /f   and press EnterPress Y to accept scheduling scan for next bootReboot and it will run at startupGood Luck,  

1 more replies
Relevance 51.66%

Hi, my T530 has recently starting giving me trouble rebooting in regular mode. Whereas I can reboot in safe mode, I do not even reach the initial login screen when I attempt to start-up regularly. All I get is a black screen with a visible cursor. Any ideas where this is coming from and what problems I have?

More replies
Relevance 51.66%

I have been having the same problem I think. Using wireless I can connect in safe mode but not regular. When I try to connect it say's page cannot be displayed. It shows the internet is connected but it will not connect. I am able to connect to my wireless network with my phone and it works fine. Toshiba said since the laptop connects in safe mode that there is a program blocking the connection and that program needs to be found. I did not want to pay them $100 for a 1 time fix. So here I am. the above post sounds similar to what I am experiencing. does it sound like the above fix would work for this issue.
Thanks
 

Answer:Using wireless I can connect in safe mode but not regular.

What firewall / security suite or anti-virus do you currently have on the PC - or you have ever had on the PC in the past - any trial ware - like Norton, kaspersky or Mcafee or any free security suites like zonealarm, AVG , Webroot etc
 

3 more replies
Relevance 51.25%

Hi, is there any way to transfer all the settings, extensions, passwords, bookmarks, etc. from Portable Firefox to the regular Firefox installed on the computer, and vice-versa? I tried MozBackup, but it didn't seem to work. Is there any other way?

Thanks,
k0shyX

Answer:Transferring Settings Between Portable and Regular Firefox

k0shyX,

You will have to do that manually, i.e., copy individual files/folders. Since the Profile is set up differently for the portable Firefox, it wouldn't be possible to simply copy the Profile from one application to the other.

1 more replies
Relevance 51.25%

Windows 7/64bit. 4gb RAM
 
This problem is getting on my nerves.
 
Using Firefox at early am hours the computer suddently becomes ultra slow.   100% CPU..  found svchost with associated handles something /SharedAccess/Epoch and /SharedAccess/Epoch2 and others.. 
 
I've disabled many sheduled tasks and disabled service triggers trying to find the root of the problem to no avail.. 
 
I have no more ideas so Im here.. 

More replies
Relevance 51.25%

Hello and thank you in advance for reviewing my support request.

My computer components are...
EVGA x58 SLI motherboard with Core i7
EVGA GeForce250
6gb Corsair Ram (3 sticks of DDR3)
750watt standard Powersupply from ULTRA
Hitachi 1TB 16Mb 7200rpm Sata hdd
Vista Ultimate 64-bit

My case...
After 3 months of no problems after building the computer from scratch. The power supply decides to blow up. Not literally blow up but there was a ton of toxic smoke and i did notice sparks flying out from the power supply. So i shipped it back for an exchange, and now i recieved my replacement and installed it. Everything seens fine until the Windows loading bar shows up. It seems to be taking forever which it did use to take only seconds to get past this. Then once the Windows Icon shows up and makes that classic Vista soundeffect, the screen turns to no-display-esk status and the motherboard seems to be hard at work (literally seems like its struggling to run something but it clicks, slows down, and restarts to struggle constantly) In an attempt to revi3ew the problem i turn off the comp, reset the cmos again, check all specs in setup, and try to run it in safe mode. Windows Vista 64 succesfully runs in safe mode... so i think it just needed to be reset, so i turn it back off and on again, and run normal mode... and the same no display with struggling system.
Note that this has everything to do with the powersupply getting fried and nothing with any other software or hard... Read more

Answer:Vista 64bit Safe Mode ok/Normal Mode not ok

Motherboard drivers are a possibility. Please go to your manufacturer's website and make sure you have the most recent drivers installed, specifically your chipset.

If that doesn't work, try following the instructions here: http://www.techsupportforum.com/1871981-post2.html

5 more replies
Relevance 51.25%

Good afternoon, While watching a video on youtube, my pc froze. I was unable to move the mouse or get any response from my keyboard and had to turn off the unit via the power button. When turning the pc back on in regular mode, I can use the pc for about one minute after logging into my windows screen. That is when it freezes again with the same symptoms. I am able to log into windows in safe mode with networking which is where I am presently. I went through the steps suggested by the Major Geeks Malware experts and no malware was found. Their suggestion was I try the Software forum. I am hoping you may have an idea or two. I have an HP G62-435DX Notebook PC. I did attempt to restore to a previous known good login and the same problem occurred. When the problem initially occurred, I had fallen asleep so I am not sure if a windows update of some variety occurred, or something similar.

You guys have helped me before and I am appreciative of this service. Thank you.
 

Answer:PC is freezing shortly after opening windows in regular mode

One update - I ran event viewer while in safe mode and my pc froze twice. Both times it occurred about 30 seconds after I opened even viewer. On both occasions, the only option available was to depress the main power button and hold it. I have noticed no other problems in safe mode.
 

5 more replies
Relevance 51.25%

Trying to help out my girlfriend with her computer. It will not run properly when started up in regular mode. Here's a quick list of some of the things that do not work properly:

*The computer (and all subsequent programs) will not connect to the internet.
*Internet Explorer windows will not pop up when the program is started (but IExplore will show in the taskmanager).
*AVG will not show any windows or any signs of functioning in the taskbar (but will also show in the taskmanager).
*Anytime I try to get the contents of 'My Computer' to show in a window, that window freezes.
*HijackThis will start just fine, but when I click scan it freezes.

And oddly enough, the computer runs just fine if I start it up in any sort of Safe Mode; including Safe Mode with Networking (yes, internet works fine). The only problem with Safe Mode, is that AVG will not start. So, I cannot update,scan, or repair any potential problems. Here is the HJT Logfile:
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 4:22:59 AM, on 12/8/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16735)
Boot mode: Safe mode with network support

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Internet Explorer\iexplore.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Prog... Read more

Answer:Computer is not running proper in regular startup mode...

BUMP....

Any help would be greatly appreciated!
 

1 more replies
Relevance 51.25%

I recently came home to my computer off and when I went to turn it back on, it started up with a black screen after the windows logo with just the cursor available. Things like ctrl-alt-delete did nothing so I tried booting up in safe mode which ended up with same black screen and cursor.

I then went to search the internet for possible fixes and have done/verified the following:

Used boot CD and ran Start-up repair, told me to remove any mp3 players or USB devices and try starting again, didn't work (nothing was connected in the first place). The start-up repair log appears to identify no problems with the system.

It's not a hardware issue, the drive itself has been checked on another computer and I've already used a new drive and installed a new copy of windows using the same computer.

Not a virus issue, scanned the drive for viruses and did a chkdsk on it, neither of which turned up anything.

Unfortunately there are no restore points saved so I can't just revert to an older profile.

Since I can access the drive on another computer, is there any program I could run to try and fix the problem? This seems to be the only thing that hasn't been covered in other topics similar to this one which I've found online.

This is my last resort so any help that you can provide will be greatly appreciated,
Thanks!

Answer:Black Screen on start-up in regular and safe mode

Did you take the cover off and make sure all cables are connected, make sure that your RAM is seated properly. Just anything that might be loose. From what you say, the HDD seems to be OK. It would seem that making sure everything is connected OK would be the next step. Let us know.

9 more replies
Relevance 51.25%

Hello. 
 
My ISP (charter) let me know that there is not a problem with the modem. This problem has only been going on for perhaps the past three days. My internet speed from speedtest.net is very slow, download tops out at 1.98  and upload at 3.20 in normal/regular mode.  In safemode the speed is 98.0 download. I've done a system restore already that did not resolve this, run my Avast! Antivirus and Malwarebytes, no problems found.  What can I do to so that way my internet speed is normal in regular mode? Please let me know what additional information you need.
 
Here's my computer specs:
 
Windows 7 Home Premium
Manufacturer:  ASUSTeK Computer Inc.
Processor:  Interl® Core™ i5-2450M CPU @ 2.50GHz   2.50 GHz
System Type:  64 - bit Operating System
Installed Memory (RAM):   6.00 GB  (5.89 GB usable)
 
Any assistance is appreciated.  Thank you.

Answer:Full Broadband Speed Only In SafeMode, Not Regular Mode

Apologies to BleepingComputer but try downloading and running Complete Internet Repair from here: http://www.majorgeeks.com/files/details/complete_internet_repair.html
I always select the top few and avoid the areas that are unrelated tithe issue.
all it does is to clear and replace the salient internet settings. I have Ben using it for several years and have found it vey safe.
If that doesn't fix it, a bit more analysis is required.......
P

11 more replies
Relevance 51.25%

Basically, Hotmail doesn't seem to fully load and I have a hard time accessing my mail.
I have Chrome, Opera, Firefox and IE.
Hotmail is messed up in Chrome Incognito, Opera, Firefox and IE, but works PERFECTLY well in Regular Chrome....

What could be the problem ? I don't have an issue with any other website.
 

More replies
Relevance 51.25%

I'm working with someone's laptop here, trying to get it working again without having to redo the entire thing. I've done numerous virus/malware scans and while it found a few things, didn't seem to help the issue. I've also ran ccleaner on it and removed all programs from automatically starting up. It has 1gb of RAM, which screams pain when you talk about Vista running on it, but even still, the system performs great in safe mode. However when in regular mode, once you log in it'll take upwards of 10-12 minutes (yes, I've timed it) to present me with the desktop. In the mean time, it sits at a black screen. Once it's loaded, it runs dog **** slow. But again, safe mode it zips around just fine.

Something is telling me to redo it anyway just because things don't feel "right" with it. It belongs to someone who is just online to check the news, weather, and facebook. They don't do any downloading or anything else.

Answer:Vista - Ultra slow login, but only in regular mode.

Redo the profile.

Fix a corrupted user profile

That should help remove the 12 minutes logon.

3 more replies
Relevance 51.25%

Mod Edit: moved to better forum for assistance wit this ~~ boopme
 
Need help with FBI ransomware virus that affects regular mode and safemode.  I see there is a post for that with some instructions, but I have a twist and am looking for assistance.
 
I am a former H/W service tech with limited experience in dealing with S/W and viruses. 
 
A totally PC non-technical friend who lives out in the boonies 250 miles away is no where near any tech services, so he called me to help.  I have alsways been able to help him before and I feel ignorant when dealing with this issue he came up with this time.  He called me to help him remove the FBI ransomware that had locked up his computer with Windows XP Professional that had also affected safemode.  I worked with him over the phone as we tried what I knew (no go), so then I started to research it on the internet. 
 
I had him use another PC to download Hiren's Boot CD and he followed the instructions I found to fix it.  It did remove a little bit of things, but continued to lock up when he he booted up.  Safemode with command prompt did not allow him to use rstrui.exe to restore it to a known previous restore point.  He has a backup on CD from the end of December, but nothing recent.  The hard drive came preloaded with Windows XP Pro from the manufacturer and they did not give him his Windows CDs wehn he bought it, so formatting and reloading Windows and the rest of ... Read more

Answer:Need help with FBI ransomware virus that affects regular mode and safemode.

Another piece of information.  I also tried to run Norton Power Eraser from my hard drive to the "bad" drive, but it only let me run it on my drive (current operating system).  Under the "Advanced" tab, it let me do a "reputation scan" of the bad drive and it came up with a few .exe files and a whole bunch of .dll files, but the status showed, "unknown" for all of them.  Most of the .dll files were showing up under "Open Office" files, but some others were not.  I could delete them one at a time (about 70 of them), but I didn't want to do something that might mess up the drive. 
 
Any suggestions?
 
Thanks.

48 more replies
Relevance 51.25%

This is baffling me to no end. I can boot up fine in safe mode, and with networking. But I still manage to get a BSOD not too long into the session. I managed to capture a video of it and in the Technical information of the blue screen it said "STOP: 0X0000007E (0XC0000005, 0X81CB6169, 0X807F09BC, 0X807F05AO)", not sure if that's of any use... I've also uploaded the minidump file if you can use that information.

The other issue is the OS doesn't load at all in normal boot. It'll show the windows logo animation screen, then go black, and do nothing until I hit the power button. These problems started arising not long after I installed W7 onto the computer (acer aspire, amd athlon 3800+ CPU, installed a dedicated nvidia 9700 gt card overtop of the dedicated one (the problem was there still before that), 1.5 gig of ram).

If anyone could please help me with this it'd be greatly appreciated, thanks.

Answer:BSOD on Safe mode - No load on Regular boot

10 memory dumps - 6 different STOP errors, 5 different drivers blamed

I would suspect that there's a compatibility or a hardware issue here.
The most likely problem is with your wireless USB adapter as the driver is dated from 2006.

Please uninstall the software for your wireless USB adapter and see if that stops the BSOD's. If so, then either download the latest, Win7 driver for the USB adapter or (if there isn't a Win7 driver) purchase a new adapter. I'd suggest a PCI/PCIe adapter that plugs into your motherboard (rather than a USB adapter) as they have less problems than the USB one's.

Summary of the BSOD's:

Code:

Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Wed Apr 28 21:13:01.352 2010 (GMT-4)
System Uptime: 0 days 0:01:43.052
BugCheck A, {5d42a941, 2, 1, 8287e028}
Probably caused by : ntkrpamp.exe ( nt!KiTryUnwaitThread+46 )
BUGCHECK_STR: 0xA
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Wed Apr 28 18:58:32.420 2010 (GMT-4)
System Uptime: 0 days 0:01:08.920
BUGCHECK_STR: 0x50
PROCESS_NAME: iexplore.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Wed Apr 28 18:56:48.967 2010 (GMT-4)
System Uptime: 0 days 0:04:23.666
BugCheck A, {76bcd2e9, 2, 1, 82c1e839}
Probably cause... Read more

3 more replies
Relevance 51.25%

Hello all,

My wife's laptop (which is running Windows XP service pack 2) recently got hit with super anti virus pro. I ran malware bytes on the computer and on restart the computer would hang on a black screen with the cursor. I restarted in safe mode and was able to get back into normal mode after I used msconfig to disable all the programs that were running on startup. After re-starting I was able to log in, in normal mode. I also used msconfig and changed the startup selection to diagnostic startup.

Now windows explorer wasn't running, so I restarted in safe mode. Windows explorer won't run now in safe mode either. I restarted one last time in safe mode with command prompt. The command prompt works and when I tried to use that to run explorer.exe it came up for a second under windows task manager and immediately closed. I'm pretty much at a loss of what to do now.

Answer:Windows Explorer neither loads in regular or safe mode

<<I also used msconfig and changed the startup selection to diagnostic startup.>>Did you ever take the system out of diagnostic startup mode, using MSCONFIG?http://support.microsoft.com/kb/310560Louis

3 more replies
Relevance 51.25%

I had some problems with the sality.aa virus and it corrupted my safe mode. In order to access safe mode i used  msconfig- BOOT.INI and checked the checkbox next to /SAFEBOOT. But because of the corruption of my safe mode now computer stuck in a vicious circle ( try to start at safe mode, give a blue screen error and restart again ). So is there any way to prevent safe mode activation at the beginning and start the XP at regular mode by using Recovery console or any other method to stop this cycle, thank you for your advices and sorry for my poor English.

Answer:Switch back to regular mode by using Recovery console

Use a live cd (Ubuntu is my preference) and delete or rename the file C:\BOOT.INIWhen NTLDR cannot find a boot.ini file it is programmed to load the system installed at C:\Windows in regular mode by default.  NTLDR will display the advisory message "Invalid boot.ini file  Booting from C:\Windows"However, even if the above works I think you may have other problems.  For assistance with malware removal please visit the CH Computer Viruses and Spyware Forum and read the stickies by Evilfantasy especially http://www.computerhope.com/forum/index.php/topic,46313.0.html but be patient, the authorized malware removal specialists are very busy.Good luck.

1 more replies
Relevance 51.25%

This is baffling me to no end. I can boot up fine in safe mode, and with networking. But I still manage to get a BSOD not too long into the session. I managed to capture a video of it and in the Technical information of the blue screen it said "STOP: 0X0000007E (0XC0000005, 0X81CB6169, 0X807F09BC, 0X807F05AO)", not sure if that's of any use... I've also uploaded the minidump file if you can use that information.

The other issue is the OS doesn't load at all in normal boot. It'll show the windows logo animation screen, then go black, and do nothing until I hit the power button. These problems started arising not long after I installed W7 onto the computer (acer aspire, amd athlon 3800+ CPU, installed a dedicated nvidia 9700 gt card overtop of the dedicated one (the problem was there still before that), 1.5 gig of ram).

If anyone could please help me with this it'd be greatly appreciated, thanks.

Answer:BSOD on Safe mode - No load on Regular boot

Try this:

Startup Repair
Note: You may need to do startup repair 3 to 4 times.

System Repair Disc - Create
System Recovery Options
Repair Install

1 more replies
Relevance 50.84%

ok so everytime i go to some pages (mostly mapquest and youtube) i get the source page. sometimes i refresh it and i shows me the original. most of the time it doesn't. can someone help me here.

Logfile of HijackThis v1.99.1
Scan saved at 9:10:27 PM, on 10/19/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16544)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\ZoneLabs\vsmon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\Grisoft\AVG7\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVG7\avgupsvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\CTsvcCDA.EXE
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\Tablet.exe
C:\Program Files\Viewpoint\Common\ViewpointService.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\dllhost.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Creative\Sound Blaster X-Fi\DVDAudio\CTDVDDET.EXE
C:\Program Files\Creative\Sound Blaster X-Fi\Volume Panel\VolPanel.exe
C:\Program Files\Creative\Shared Files\Module Loader\DLLML.exe
C:\PROGRA~1\Grisoft\AVG7\avgcc.exe
C:\Program Files\BroadJump\Client Foundation\CFD.exe
C:\WINDOWS\S... Read more

Answer:Firefox show page source instead of regular site

Hello and welcome to TSF

I would recommend that you go here; read and follow the instructions very carefully; then, post all the requested logs and information; as instructed, to here. (Just click on the coloured links.)

Once done, please be patient, as the Security Team Analysts are usually very busy; one of them will answer your request as soon as they can.


Good luck

Please also remember DO NOT post your logs in this thread, please start a new thread here. (Just click on the coloured link.) and post the logs.

1 more replies
Relevance 50.84%

Hey guys, is there any plugin for Firefox that can automatically save opened tabs & sessions in regular intervals, say 5 minutes?

BTW, after I update it to 21.0, the following page did not display at restarting the application after it cashed and all previously opened tabs were all gone with "Restore Previous Session" greyed!!!

Answer:How to automatically save Firefox sessions in regular intervals

There's no need for that kind of an extension (if one even exists) because you can just do this:
Open the Tools menu and select "Options"
Switch to the General tab
Where it says "When Firefox starts", select "Show my windows and tabs from last time"
Click OK
If this doesn't work, then I recommend Firefox 20 or even 19 (I prefer 19 myself).

5 more replies
Relevance 50.84%

hey i recently bought parts and built a pc 2 months ago from tigerdirect and have been receiving problems. 10 minutes earlier when typing this I got a BSOD Memory_management 0x00000001a. Though that is not my issue. My issue mainly is the BSOD 0x000000101 about some processor time internval failure? i have some attached in the rar but best i can get. This happens right on click of NEW GAMES that i JUST BOUGHT!!! so what now i have to try to refund my games or what..now when typing i am even receiving lag...if anyone can help, i tried memtest, spyware scans, and its all fine, also have windows 7 ultimate 64bit and newest drivers installed
AMD fx8120(never overclocked)
8gb corsair vengeance ram
nvidia gtx 560
sata 500gb hdd
ultra lsd 650watt
motherboard Gigabyte 970A-d3
please help soon, dont want it to be to late to return or seek warranty...(never messed around with parts to have it voided)

Answer:random BSOD (some from regular use of firefox, some from games) error

Welcome






Quote:
BSOD Index STOP 0x00000024: NTFS_FILE_SYSTEM Usual causes: Disk corruption, insufficient physical memory, Device driver, Indexing, Resident antivirus, backup, defrag programs, Disk/Drive failing/failure


Suggestions:

Check your hard drive for errors following this tutorial Disk Check then Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests.

Dump 1


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 24, {1904fb, fffff88009ea6ff8, fffff88009ea6860, fffff800031a60bf}

Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+233 )

Followup: Pool_corruption
---------
Dump 2
If you are overclocking, please stop.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*********************************... Read more

4 more replies
Relevance 50.43%

This is currently after a fresh install of windows 7 when I was encountering problems yesterday morning when I booted up my computer.
 
Problem 1: Runs fine in safe mode but slow in regular boot up.
Problem 2: Says I have 8gb ram available but says I have 16gb installed in BIOS.
Problem 3: Internet speeds start really fast then drop to around 3kb/s but not on any other computer in the house. was fine before fresh install.
I have tried updating my BIOS as well as only loading necessary start up programs and services through msconfig with no visible change.
 
I dont know what logs I have to provide as I am a novice with PCs.

Answer:PC running fine in safe mode but exceptionally slow in regular

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis

3 more replies
Relevance 50.43%

Hey guys, I have been reading around and posted a bit on reddit and still no solution, although it seems like it should be simple.

2 weeks ago tuesday my work laptop had regularly scheduled windows updates that everyone loves to see right before they shut down. the next day it began with the circle of death after 1-3 min after start up, sometimes upwards of 30 minutes of functionality. but eventually the circle of death comes and i can't click on anything, however the mouse will still function.

i have gone back to every restore point possible and still get the freezing. i have updated/ran MSE in safe mode as well.

It's not a huge deal if I have to reformat, I just really feel like the solution shouldn't be that hard.

Anyways, thanks for your time.

Answer:BSOD, after regular updates, works fine in safe mode

Hello and welcome aarondsp well if you can get safe mode run these mate

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html< if necessary include the /f and /r in the command line as per Option2 >in safe mode if need be

Forgot

SYTEM SPECS ADD IN

matecan we have some system specs please as what you have posted gives us not thatmuch to work with and given there are so many manufacturers of components andconfigurations that do influence what goes on within any given machine and OS.
System Info - See YourSystem Specs

1 more replies
Relevance 50.43%

Have a laptop here that was virus infected. AVG pro removed 157 viruses including trojans. Now windows crashes after windows 7 icon. Restore last setting just runs and runs with no completion. Safe mode gets only so far in loading drivers and then reboots (suspiciously stops at the AVG driver, hangs and reboots). There is no restore disks for this laptop. Is there a way to stop certain drivers from loading during safe mode? Any help or guidance is appreciated.

Answer:Remove viruses and now windows won't boot regular or in safe mode

Hi.
157 virus? It's seem that avg is not working well or you make something wrong.
Try these steps,in this order,
Advanced Boot Options
System Restore
Troubleshoot Application Conflicts by Performing a Clean Startup
Then if its possible remove avg and use this Good and Free system security combination.

3 more replies
Relevance 50.43%

I had some problems with the sality.aa virus and it corrupted my safe mode. In order to access safe mode i used msconfig- BOOT.INI and checked the checkbox next to /SAFEBOOT. But because of the corruption of my safe mode now computer stuck in a vicious circle ( try to start at safe mode, give a blue screen error and restart again ). So is there any way to prevent safe mode activation at the beginning and start the XP at regular mode by using Recovery console or any other method to stop this cycle, thank you for your advices and sorry for my poor English.
 

Answer:Solved: Switch back to regular mode by using Recovery console

6 more replies
Relevance 50.43%

Yesterday I started getting the "Congratulations, you won" audio as well as some other adverts randomly playing without any popups or browsers open. I tried a series of malware removals (Malwarebytes, spybot seek and destroy) I got hijackthis and tried to look for out of place items by matching with others posts. Anyways, did all that and then then ran an antivirus scan (AVG free) and went to bed. When I woke up I was at the Start windows normal/safe/safe with network/last known screen so I went to last known. When I did that, it never booted just goes to the windows logo and then blue screens saying memory issue or update BIOS. Tried to boot in safe mode, same story. When I run the diagnostics test it says "Error loading operating system." All remedies online so far require getting online (computer wont start) and downloading BIOS updatesHELP!!!

Answer:Congratulations virus now cannot boot (regular or safe mode) I get the BSOD

Hi, figsahaas42 It seems that the issue is related to the Master Boot Record due to the Whistler Trojan. You will need the Windows VISTA Installation DVD to fix this. Please be advise that there is always a slight possibility that you may lose your Data repairing the Master Boot Record.You must access the Vista Recovery Environment throughout the Vista installation DVD.At the Install Windows screen, select Repair your computer. Then the command prompt.Type the following command at the prompt, then hit Enter.bootrec /fixmbrOnce finished, type Exit and press Enter. Restart the computer in Normal Mode.

3 more replies
Relevance 50.43%

I've been having some issues with my laptop for a few days now. It all started when I wanted to stream Netflix and it kept erroring out. I then noticed that the Network "Red X" was showing, even though I had an internet connection and was browsing. I came back to it to research the next day and I noticed that I couldn't run Malwarebytes, AdAware or Internet Explorer. That's always my first sign of a problem. Got it running in safe mode but it didn't find much. The network connection doesn't show the "Red X" in safe mode. I'm also experiencing a hang time when I delete files and when I add a new folder to the desktop. This doesn't occur in safe mode either. I had to run all of the tests in safe mode as they wouldn't work in regular mode. I also read TDSSKiller with no unusual results.

The last time I had a major virus was in November I believe and that fix knocked out my ability to use Windows Update. I haven't figured out how to recover that yet.

So, lots of problems and no solutions. I'm enclosing my log files per the forum instructions.
 

Answer:Red X network (still works), delete hang & can't use Malwarebytes in regular mode

Welcome to Major Geeks!

Your logs are all clean but logs from normal boot mode would be much more useful.


Are you sure that your red x is not just for the below Wireless Network
Code:

Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros AR5007EG Wireless Network Adapter
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
 

9 more replies
Relevance 50.43%

Hi,

I have a laptop that randomly freezes up for a few minutes over and over. I have ran malwarebytes, HijackPro and webroot. I also have Ran chkdsk /r, ccleaner, and have defraged it. No substantial problems have been reported and all that were have been repaired. But my computer continues to freeze every few minutes in safe mode and regular processes. Please help me into what I should do. I am so lost here

Jippys

Answer:[SOLVED] Laptop randomly Freezing safe mode and regular

Hi and welcome to TSF please post the make and model of your laptop please list all the things you have already tried so we can try to avoid repeating unless entirely needed when in safe mode have you tried system restore to a point when it all worked without issue

19 more replies
Relevance 50.43%

I have booted up into regular mode with my user account and as an Administrator. Desktop icons load slowly (placeholder icons load right away, but the specific icons for the items load 1 evrey 5 seconds). I get a message about Zone Alarm being expired (not part of theproblem, but letting you know it executes Zone Alarm just before the BSOD occurs).

Safe mode is fine (I have even tweaked the registry to have sound during safe mode). Safe mode sucks though.

I have attached the 3 BSODs. I haven't analyzed them myself yet. My dump files exceed the size limit. - will convert to a format that is within limit and is readable.

Thank you.
 

Answer:BSODs booting into regular mode Windows 7 Home Premium

You should have no problem posting minidumps even with a low post count. You must Zip them. Read and follow these instructions:
http://www.techspot.com/vb/topic51365.html
 

1 more replies
Relevance 50.43%

I have a Dell Studio 1555, win 7 Home Premium. I am trying to restore the system to Factory default. After pressing F8 at startup, when I select 'Repair your computer', it boots into regular Windows.

I think it has something to do with the Partition identifiers? Please help.

Thanks.

Answer:'Repair your computer' option boots into Windows regular mode

rkay,
Welcome to SevenForums. What are you trying to do exactly. Have you changed something in your bios and you want to return to factory default or has an issue developed and you want to restore back to before it began in hopes of correcting as they are two very separate issues?

9 more replies
Relevance 50.43%

I'm working on a coworkers computer that runs Vista 64 Professional, and we cannot get Outlook to run. Here are the errors that its given me.

1. Microsoft Outlook has stopped working (A problem causes the program to stop correctly. Windows will close the program and notify you if a solution is available.).

2. Outlook failed to start correctly last time. Starting Outlook in safe mode will help you correct or isolate a startup problem in order to successfully start the program. Some functionality may be disabled in this mode.

3. Outlook failed to launch in safe mode. Do you want to start Detect, and repair?

- It still wont run, and I've tried these commands in Run:

outlook /clearviews: Gave me the error "the command line arguement is not valid. verify the switch you are using."

outlook /safe: Gave me error 3 that I noted above.
- Then I tried repair in the Programs/Features section, and that didnt seem to have any effect.

- I've also looked in the task manager to make sure that I was not running multiple instances of the application.

- I tried to reinstall w/out uninstalling (she doesn't want to lose any of her saved information).

This is a new thing that just started happening after the weekend, and my guess is that its due to one of the automatic updates?

Answer:Outlook 2007: Wont open in regular, or safe mode.

This morning I tried to repair using the Outlook 2007 disks, and I noticed as soon as I run the disk I get the error...

"dwdcw20.dll has stopped working"

3 more replies
Relevance 50.43%

I tried to attach perfmon /report file but that command doesn't work.

OS - Windows 7
? x64
? What was original installed OS on system? same as above.
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? OEM version

? Age of system (hardware)? don't know( bought it 2 years ago)
? Age of OS installation - have you re-installed the OS? yes using recently recovery CD bought from manufacturer.
? CPU? Intel(R) Core(TM) i3 CPU M350 @2.227 Ghz 2.66 GHz
? Video Card
? MotherBoard
? Power Supply - brand & wattage

? System Manufacturer? Acer Aspire 5741-5763

Answer:BSOD of death on acer 5741, regular mode won't start

Perfmon report added to the attachment.

? CPU? Intel Core i3 350M
? Video Card? Generic PnP Monitor on Intel graphics media accelerator HD
? MotherBoard? Acer Aspire 5741
? Power Supply - brand & wattage? all acer

2 more replies
Relevance 50.43%

Hi,
My CIO's Outlook is starting in "safe Mode" and have ran detect and repair and it did not fix it.

Any suggestions on how to get it to come up in regular mode??

Thanks

Michael Henderson
 

Answer:Solved: Outlook is starting in Safe Mode, I need it to start regular

You are getting this message?
Outlook failed to start correctly last time. Starting Outlook in safe mode will help you correct or isolate a startup problem in order to successfully start the program. Some functionality may be disabled in this mode.

Do you want to start Outlook in safe mode?
Click to expand...

If so, what happens when you say No?

Also, what version of Outlook?
 

2 more replies
Relevance 50.43%

Curious where the issues could be. I posted last night that when I was trying to run DISM or SFC a small second window would appear and close and then the processs would not start at all. It would just sit there and do nothing. The other thing is I could not close those cmd windows where sfc and dism were not working even via task manager. I was going to do a reset of windows, but I thought I would give something one last try. I booted into safe mode with networking and dism and sfc ran perfectly and completed. I am at work right now. I haven't tried to go to desktop on regular boot. I was going to do a couple more sfc dism when I got home to make sure things were fixed. My question is what could cause dism and or sfc to run perfectly in safe mode, but not on regular boot?

Answer:Strange-DISM SFC work in safe mode, but not in regular boot?

Run as Admin ??

2 more replies