Computer Support Forum

Outlook without "Outlook Today" calendar, Just "Inbox"

Question: Outlook without "Outlook Today" calendar, Just "Inbox"

I have installed Outlook (which looks more like OE than Live mail, perhaps) and started using it. I am fairly happy. The only thing that bugs me is that it starts up with two windows and two tabs, one of which is the calendar functionality. I can close that down again but it is a pain. Is there a way of executing Outlook so that only Inbox appears? I want to disable the calendar completely and never see it again.

I use an online, cloud computing, calendar since I have many computers and waiting for calendars to synchronise is something I can do without.

Relevance 100%
Preferred Solution: Outlook without "Outlook Today" calendar, Just "Inbox"

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Outlook without "Outlook Today" calendar, Just "Inbox"

Which version of Outlook are you using?

3 more replies
Relevance 127.02%

Am using OUtlook 2003 and wondered whether there is a way to simultaneously view the Calendar and Contacts folders on one screen. Thanks.
 

Answer:Outlook: Simultaneous View of "Calendar" & "Contacts"

Maybe someone else has a better idea, but you could open two instances of Outlook and size the screens so that you could view both windows next to each other.
 

1 more replies
Relevance 118.32%

Here's one for you Outlook gurus. I have talked to a lot of people about this (including 2 Outlook trainers), and they cannot figure it out. I am about at the end of my rope...

Here's the challenge:

A new entry is put into the Outlook 2000 calendar (double click on the time of the event.)
In that window, there is a drop down menu, which is marked "show time as." In that drop down menu, "busy" is chosen.

After the entry is completed and saved, that date does NOT show in bold, on the calendar pane. Instead, there is a grey box around that date.
When clicking on the "attendee availability" tab, the newly entered calendar event, does not even show up. I know the event has been saved, as it DOES show up in the calendar pane (with a grey box around it - not bolded, as it should be.)

Now, here is the weird part-
The entries that I am having problems with, were done in the last week or so. If I enter one right now, it will appear correctly. This only seems to be happening with older dates I have already entered.
Also, if the "show time as" drop down menu is set to "out of office", saved, then set back to "busy", the date will now show correctly.
This is a community calendar which is used by more than one person.

This problem is causing events to be scheduled at the same time, as Outlook is not recognizing when events have already been scheduled for certain dates.

A couple of variables:
1. The PC was recentl... Read more

More replies
Relevance 115.13%

Outlook 2003:I'm a massive fan of outlooks Search folders, I receive in excess of 400 emails per day, of which approximately 250 need my attention, even if to reply back and give someone an answer.

A problem I find is that I am so busy with my emails, I often need to clean out my inbox. I do this by setting up basic search folders such as "all emails from my team which are in my inbox only" or "any email sent to me which was part of a distribution list in my inbox only" etc...

This is great for filtering my mail and I would like to create a rule as such:

"All mail within my inbox which has been either replied to forwarded by myself".

I can't seem to find any options and I'm hoping an Outlook guru can help

If you don't know the answer, can you try googling it for me to see if you can find anything, loads of heads are better one...

Thanks in advance
 

Answer:Outlook 2003 - Search Folder: viewing "replyed to" & "Forwarded" mail

52 views and no replys? - come on guys I thought this stuff was easy for you lot
 

1 more replies
Relevance 114.84%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

Answer:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Relevance 114.26%

Hello,

I'm hoping someone can help me. I'm using Outlook 2003. I'm designing a new Contacts screen, which better suits the needs of my business.

I have been able to figure out how to everything except for this:

How to I design the "date" and "dollar amount" field values to default to blank/empty instead of defaulting to the word "None" in the case of the "date" field and "$0.00" in the case of the "dollar amount" field?

Any help or direction would be greatly appreciated!
 

More replies
Relevance 113.39%

My operating system is Windows XP and my email program is Outlook Express. It's always worked fine, until about two weeks ago, when I try to delete mail in my Inbox, they don't delete. When I click the "delete" button, it appears to mash down like it's supposed to, but nothing happens. I tried going to the "microsoft.com/downloads" site to install their IE6 Service Pack, but got the message "Setup has detected a newer version of Internet Explorer already installed on this computer. Setup cannot continue." Any ideas?
 

Answer:Outlook Express Inbox "delete" button broken

Welcome to TSG!

You could try going to your Control Panel > Add and Remove Programs Internet Explorer and use the "Repair" option there.
 

1 more replies
Relevance 113.39%

Hello there,

Outlook 2007 Imap account can't get the new items synced in to its "Inbox" folder. Other imap folders are up to date. The problem is only with Inbox.

The newly arrived items on webmail's inbox are not appeared in my outlook's inbox. When I move it to any other folder on webmail, then it reflects in outlook. (I mean its only outlook's inbox that stopped syncing, while all other subscribed folders do)

The 'updating cached messages' task shows the count as per webmail's inbox count, but it wont actually update all of them. For eg, there are 1500 items in webmail's inbox & outlook's inbox has got just 1000, the task while running shows as 'updating cached messages x/1500' and once the count reaches 1000/1500, it ends.

When an item is deleted from outlook's inbox, it reflects on webmail & similarly when deleted on webmail, its deleted on outlook's inbox as well. The only thing is outlook inbox, which no longer receives new mail.

Have spent ample of time to identify the issue but no luck yet. There are 100+ systems in the network with same setup and this issue is observed in about 8-10 pcs as of now. When the account is reconfigured there is no issue. So the problem is linked to outlook profile or pst which we couldnt figure out & find a fix.

System Spec:
XP SP3 on core2duo with 4GB of Ram, Office 2007 Standard, Symantec Endpoint Protection.

Have anybody experienced this?
Appreciate your help!!

--
Sreenivas.

More replies
Relevance 113.39%

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

Answer:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Relevance 113.1%

My computer is a DELL Dimension 8200.  My OS is Windows XP,  Home Edition.  My ISP is PeoplePC and I use a dial-up connection.I am experiencing the following described problems with "Outlook Express" and with "Internet Explorer:"Outlook Express:When I attempt to use "Insert Picture" into the body of a new message by left clicking on the small box like icon, which contains mountains a rather large blank screen appears that has a blue border, white/blank interior, small red box with a white cross at the upper right corner (cancel facility) and the Internet Explorer icon (blue "e" with a gold band)  at the upper left corner.  There nothing about such screen that is functional and I remove it by left clicking on the red box with the white "x."  As a consequence of these circumstances, I am unable to insert / embed a picture within e-mails that I prepare to be sent.Internet Explorer:At the "Internet Explorer" screen when I left click on the "Tools" button and then on the "Internet Options" button that appears in the drop down menu only a small screen that very, very quickly flashes and goes away appears.  Consequently, I am unable to access / use those items contained in the "Internet Options" facility.When my home page is booting up after I have connected to the internet, a script error screen appears that includes this, "res//ieframe.dll/navcancl.htm&... Read more

Answer:Multiple Problems With Both "Internet Explorer" and "Outlook Express"

.... dialup.... you have my sympathy.  Do you have SP2 (Service Pack 2) for Windows XP installed?  What protections are you using against viruses and spyware?Have you been able insert pictures in the past?  I gather you're getting a glimpse of this panel for inserting a picture but it's faulty:Is that the panel you're referring to?

5 more replies
Relevance 112.81%

I use Internet Explorer 7 and Outlook Express 6 to access my MSN email account. At times, when opening Outllook Express, it will not automatically search for my new messages. It says I am offline & asks me if I want to be online. I have to click on "Send/Receive Messages" to activate my search for new messages. If I restart my computer and then click on Outlook Express, it will automatically search my Inbox immediately, everytime. I went into options and I have the box checked that says "Send and Receive Messages at Startup". It seems Outlook Express isn't recognizing that I am always online. Any suggestions?
 

Answer:Outlook express will not automaticly check "Inbox"

6 more replies
Relevance 112.81%

Within the past 2 weeks, I've got a issues that I am not able to figure out how to fix (acutally driving me a bit over the edge). Reply messages in my Inbox are coming in the same folder from recipients with a "+" next to them. In order to see messages, I click on the "+". Never happened before, and I've been using Outlook Express for years. I have not upgraded OE, no setting change on my part. My goal is to put back how it's always been, replies coming in there on message, not within another. Hope that makes sense. I will attempt to include a snapshot. I will eventually uninstall and reinstall, but really don't want to worry about losing mail and having to redo address book, etc. Any suggestions would be most welcome. Thanks..
 

Answer:Outlook Express 6 Inbox messages problem with "+"

Seems like you may have inadvertently changed the setting in OE for Current View. Click on View (on the top menu), Current View, and then unselect Group Messages by Conversation, assuming it is currently selected.
 

2 more replies
Relevance 112.81%

I accidentally touched something in my 2010 outlook inbox that changed the headers. The "Subject" header disappeared.
Can you please tell me how to change the Inbox headers to say: From, Subject, Received Date.

Right now, it just says From and Received.

Thank you!

I have Windows 7 and Microsoft Office 2010.
 

Answer:How to Add "Subject" Header to 2010 Outlook Inbox

Hi welcome to the forum.
I would usually telle people to RTFM (look it up)
But OK, Right click on the header and choose "View settings" and the Columns.
You could also try usign the Help function.
Good luck
 

2 more replies
Relevance 112.81%

Would like to know if anyone can tell me how backup the "Inbox" folder in Outlook Express/WinXP-HE? Tried everything, and obviously haven't tried something.

Thanks for your reply(ies)

John
 

Answer:backup "Inbox" folder -Outlook Express

In XP, all the OE mail foldders are stored as .dbx files. Do a file search for inbox.dbx. Mine is in
C:\Documents and Settings\[my name]\Application Data\Identities\{742DC712-BE9D-4EF7-BA65-C0041FC3121A}\Microsoft\Outlook Express\Inbox.dbx
Copy it somewhere - click on the copy to make sure it works.
 

1 more replies
Relevance 111.65%

hi !

some office 2010 problems: when i try to view "Outlook Today" i get an error message:
"cannot display the folder. out of memory or system resources".

right-clicking on outlook today → data-file properties → home page,
the problem seems to bee that it changes from the default outlook.htm to outlook3.ht

res://E:\Program Files\Microsoft Office\Office14\1033\OUTLWVW.DLL/outlook3.ht

clicking on "Restore defaults" fixes it.

but the next time i start Outlook, or sometimes even if i just take a look at some inbox-folders and then go back to outlook today,
then it?s the same problem all over again.

i have used 2010 for a while, and never seen those problems before,
it all started a few days ago after i changed some other settings, only problem is that i can?t remember exactly what i did.

one weird thing is that the problems only seems to be with my user-account, if i use my admin-account everything works ok.

i have uninstalled 2010, used ccleaner to fix the registry, manually removed all office-related files from the users-folders,
then reinstalled 2010.

the problems are still there.

any ideas ?

Answer:Office 2010, "Outlook Today"-problems ?

  
Quote: Originally Posted by hackerman1


hi !

some office 2010 problems: when i try to view "Outlook Today" i get an error message:
"cannot display the folder. out of memory or system resources".

right-clicking on outlook today → data-file properties → home page,
the problem seems to bee that it changes from the default outlook.htm to outlook3.ht

res://E:\Program Files\Microsoft Office\Office14\1033\OUTLWVW.DLL/outlook3.ht

clicking on "Restore defaults" fixes it.

but the next time i start Outlook, or sometimes even if i just take a look at some inbox-folders and then go back to outlook today,
then it?s the same problem all over again.

i have used 2010 for a while, and never seen those problems before,
it all started a few days ago after i changed some other settings, only problem is that i can?t remember exactly what i did.

one weird thing is that the problems only seems to be with my user-account, if i use my admin-account everything works ok.

i have uninstalled 2010, used ccleaner to fix the registry, manually removed all office-related files from the users-folders,
then reinstalled 2010.

the problems are still there.

any ideas ?



Hello,

Try this command Start > Run > Outlook /resetnavpane see how it goes

Good Luck,
Captain

3 more replies
Relevance 111.65%

After a DIRECTDB.DLL error (I have been fighting DIRECTDB.DLL and MSHTML.DLL errors for months after 'upgrading' to IE 6.0 and OE 6.0) I lost EVERY SINGLE MESSAGE sitting in my inbox. The messages had been there for months. They did not go to the 'deleted items' bin; they seemed to be lost.

I would love to recover them. Can anyone help? Oh, and btw --I would be thrilled if these inane and insane errors would stop, too.
Here is a cut-and--paste of the Windows faultlog.

Thanks much in advance.
-Lori

Date 05/02/2003 Time 23:32
MSIMN caused an invalid page fault in
module DIRECTDB.DLL at 0197:018ea92f.
Registers:
EAX=00000000 CS=0197 EIP=018ea92f EFLGS=00010246
EBX=00000000 SS=019f ESP=0056eb34 EBP=0056eb4c
ECX=00000000 DS=019f ESI=01906348 FS=3bbf
EDX=bffbb490 ES=019f EDI=00000000 GS=0000
Bytes at CS:EIP:
89 8c b8 c4 00 00 00 8b 46 28 39 9c b8 3c 34 00
Stack dump:
00000104 01906348 00000000 00000000 00000000 03471a9c 0056eb98 018eac6c 00000000 0056ed50 01906348 01571000 800c013b 00000000 00000000 00000000
 

Answer:Outlook 6.0 "zapped" all msgs. in inbox!

6 more replies
Relevance 111.36%

Using Windows 7 Enterprise Edition (64 bit) and Office 2010. When dragging a message from mail to the Calendar (in the lower left under the folder list) to create a new meeting/appointment, the calendar dialog will "pop under". How do I get the calendar dialog box to grab focus?

Thank you
-Neal

Answer:Outlook 2010 - When dragging message to calendar, dialog "pops under"

If you still interested, could you please create and post a screenshot.

3 more replies
Relevance 111.36%

Hello All - I ran into an issue where Outlook 2010 (Calendar) does not show certain options for a Calendar Event. Meeting that has been received and accepted, when opened does not have option of "Respond" and once that button is clicked drop down menu should display "Reply, Reply All... Reply with IM, etc."

Here is the screen-shot of it and how it is supposed to look like.. just not seeing it on my computer:
Note: I did notice when someone schedules an appointment in Calendar this option is not available; but other meeting invites co-worker of mine does have and I don't. Complete the same environment, same machines, same OS image (W7 64-bit Enterprise - company computers). Also, company IT is looking into this and so far they have not been able to find the culprit of this issue.

Thanks all!

Answer:MS Outlook 2010 / Calendar event missing "Respond" (Reply All, etc.)

Hi CarDusan,

Means you are missing the section (Change Response) through which a user can accept or decline events or Outlook appointments.

This issue arises when the following data file exists in the Windows Registry (with the values):

Key: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Options\Calendar

DWORD: DisableResponseButtons
Value: 1

Use the given "Fix it for me" solution provided by Microsoft.
Manager is unable to respond to a meeting invite

Thanks
Clark Kent

2 more replies
Relevance 111.36%

I have Windows XP and am using Office 2007. A week ago my Outlook calendar started showing the wrong date. Today is showing as 11/13/09 and it's 11/19/09. My inbox is grouping my email in "Next week" (It should list it as "today"). All todays outgoing email is dated 11/13/09 on the receiver's end (so my clients don't think they've received it because their email program is filing it under 11/13/09. All incoming email has the right date on it. My sent file has the wrong date. This is bizarre! Please somebody help me.....
 

More replies
Relevance 111.36%

On our domain environment we use Exchange and Outlook 2003. A user brought up an issue that seems to be affecting me and probably everyone else, now that I look at it.

At random, some users will show //////////////////// lines with "no information". This is completly random, and it does not even cover the whole time span. It's in gaps, while other times it's the whole line. It's random on a per user bassis.

I googled this and it seems to be a big issue yet I have not found any working solution. Has anyone seen this before and been able to fix it?
 

Answer:Outlook 2003 calendar booking showing "no information"

This has to do with clients not posting free/busy information, i saw it in exchange 2007 with older outlook versions. Take a look at this article

http://msexchangeteam.com/archive/2004/06/10/152698.aspx
 

3 more replies
Relevance 111.36%

When you open any letter to view it there are 4 buttons below (ltr): Reply, Delete, Left, Right. Obviously for 'right-handed' people Right button should open next letter and Left - previous. But for some reasons order is reversed. Do you know what is the reason? Is it UI/UX based decision?

Answer:Why "next" and "back" buttons in Mobile Outlook are reversed?

The only sensible thing I can make of it is that you're looking at a list in reverse chronological order (newest at the top), so going forward would go to the next (older) message.

more replies
Relevance 111.36%

I know this question isn't explicitly WP, but it's definitely related.
Here's my scenario. Several months ago myself and members of my family stopped receiving "accepted" notifications when we accept each others calendar/meeting invitations. We are all using your standard hotmail/outlook.com.
What used to happen was I could create a calendar event on my windows phone (my old hotmail is my MS account) and I could add attendees - usually my family members. They would receive the email, and would select accept from the reply options on their WP. It would then add the calendar entry to their calendar and I would receive an email notification that they had accepted.
I no longer receive this notification. The other members of my family experience the same issue when sending their own calendar invites from their WPs.
I tested sending and accepting invites strictly using outlook.com's web interface from my PC and I experience the same problem.
I suspect this is a setting on outlook.com but I have been unable to find it.
Does anyone else experience this problem and does anyone know how to fix it?

Answer:Outlook.com Calendar - Meeting organizer not receiving "accepted/declined" etc notifications

I don't see anything about notifications of accepted/declined in outlook.com. Share calendars in Outlook.com - Outlook.com Help
I never even knew that feature was ever available. However, I've been using desktop Outlook for the past 7 years, not web-based email.

6 more replies
Relevance 111.36%

Hi: I want to add the Notes field to a Category view of appointments.

I managed to get the Notes field showing by using the Field Chooser, and picking Notes from the All Appointment Fields list.

I later removed the Notes column by dragging it off the bar with column names, and now can't get it back again.

I've looked in the Field chooser, but Notes no longer appears in the All Appointments fields list in Field chooser.

Help!
 

More replies
Relevance 110.78%

I have a tricky problem a user is experiencing with outlook 2003.

He has access to view several other users calendar.

When looking at the calendar view in outlook 2003, down the left hand side he can see each shared calendar he has opened under the “other calendars” section. Each calendar can viewed or hidden by ticking or un-ticking it’s check box.

The problem is for one specific users calendar, this check box refuses to appear, this users calendar can be viewed okay when opened normally. He has tried several other machines and the same problem occurs.

The 2003 client access and Exchange 5.5 back-end. Running Outlook 2003 on win XP pro.

Any ideas would be appreciated!
 

More replies
Relevance 110.78%

On the majority of my workstations, this works fine. You do this:
Navigate to the Public Folders, find the Shared Calendar, right-click on it, and choose "Add to Favorites".

This then shows the Calendar (to where you have the option of viewing side by side), in the Calendars tab.
However, no matter how many times I add to favorites, it does NOT get added into that Calendar tab in Outlook and for the life of me I have no idea why.
 

More replies
Relevance 110.78%

How do I get the "memo" section to print (the section below the time/date, subject and location) I can get it to preview in my on screen calendar with auto preview but cannot get it print in a calendar.

Thanks.
 

More replies
Relevance 110.78%

I installed MS Office XP (2002) on a new Sony laptop (OS Win XP). I moved my Outlook calendar pst files from the original computer to the new Sony. It transferred fine and I can open the calendar with all appointments. However, when I try to open an old appointent or start a new one, an Outlook error message pops up: "Not Implemented". Can anyone tell me what this means and how I can get my calendar going?
 

Answer:MS Outlook calendar-"Not Implemented" pops up when try new message.

Try the Detect and Repair feature under Help.

Steve
 

3 more replies
Relevance 110.2%

How can I lock the "Now" or "TODAY" or "Date" FUNCTIONs IN Excel 2003?

This seems like it would be a simple solution as everybody that deals with Excel, at some point, would be interested in not having the dates you have entered with either function "Today" or "Now" NOT automatically change to the current date and time when you reload the workbook. But if it's a simple fix, I sure haven't been able to figure it out yet. Help!!!!!!!!!!! Go ahead and show me and make me feel like an idiot...

zjoeyx
 

Answer:Solved: Locking "Now" or "TODAY" FUNCTION IN Excel 2003

9 more replies
Relevance 109.91%

I used to be able to set up a repeat event in Outlook.com's calender for 7 weeks for a particular purpose. Microsoft in their wisdom seem to have removed that option, unless I'm missing something. Does anyone know of a setting to allow more options in setting repeat events?

Answer:Outlook.com Calendar - Setting "How Often" to 7 weeks

Just to test I've just logged onto my outlook account, went to calender and created an event. Before saving I click on view details, to the left was a selection and one said "how often", I clicking on this I selected weekly and entered the amount of weeks between events.
You must be doing something wrong. The usual problem is when something is right in front of you and you just cannot see it. We all do it.

2 more replies
Relevance 109.62%

I am actually writing this for a friend running windows/outlook (not sure if express or not) who was alarmed this am that the in box had been "emptied". i - mac/eudora user and hence unaccustomed to such treatment by my software! - suspect it might POSSIBLY be a year end issue - e.g. she has to dial back to 2010 to open that mailbox? not familiar with the software but wanting to help solve, i browsed around and found u! don't know if i have given u enuf info to make some suggestions but in any event if u can shed some light i am sure she will become an avid supporter of this site! a double bsc in physics and math, she is hopelessly at the mercy of IT. hate 2 c it and would love 2 change it! happy new year...
 

More replies
Relevance 109.33%

If you can tell me. My situation is this. After several surges computer rebooted and since then in the "incoming" = "inbox" messages are not displayed. At C: \ \ Documents And Settings \ $ user \ Local Settings \ Application Data \ Identities \ {...} \ Microsoft \ Outlook Express> inbox.dbx file exists and has a decent size, letters all over the place. How to fix pst file?
 

Answer:After several surges computer rebooted and since then in the "incoming" = "inbox" mes

Very necessary software by which you will easily recover lost MS Outlook data in case of failure. Outlook stores its data in PST files; these files contain messages, contacts, tasks, notes, appointments, and journals. Outlook Fix Toolbox reads the damaged PST file, identifies and restores the data from the file. Outlook Fix Toolbox saves the recovered data in a new PST file or in several files of up to 1Gb. http://www.outlook.fixtoolbox.com/
 

1 more replies
Relevance 108.75%

in Microsoft Outlook 2000, when I click on the "customize outlook today" line, nothing happens. I've customized before, and would like to customize again, yet somehow my customizing powers have been taken from me. any ideas?
 

Answer:cannot "customize outlook today"

There's a "problem" with Critical Update 813489 for Internet Explorer. See Microsoft Knowledge Base Article 820575.
I can supply the URL if needed. The "fix" involves a small & simple revision of the Registry, involving creating "Protected" and "Non-Protected" Registry File Import options. Takes about 10 minutes, directions are pretty good.
Hopefully they'll fix this bug, since I imagine many pc's will be effected - I thought i was doing the right thing by checking for updates regularly. Not this time.
Meanwhile, you'll need to dbl-click your "Unprotected" registry icon, Customize Outlook Today, quit, then dbl click your "Protected" registry icon to keep the Boogieman away.
 

2 more replies
Relevance 108.46%
Relevance 108.17%

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

Answer:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

1 more replies
Relevance 107.88%

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

Answer:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

6 more replies
Relevance 107.88%

I got my dell few days ago. Installed it with Samsung EVO 850 SSD 500 Gb and Kingston 8GB PC3L - 12800 SODIMM.The Windows 10 Home OEM home is installed on HDD 1TB so I decided to use Samsung Data Migration software to clone the data to SSD. However, the OS crashed and decided to install a fresh Windows 10 Enterprise to SSD and deleted the previous OS on HDD using diskpart.Now after Installing Windows 10 Ent OS files. Every after BIOS run, I got BSOD errors "MEMORY MANAGEMENT" + "Page Fault it non paged area" + "IRQL NOT LESS OR EQUAL" 

More replies
Relevance 107.3%

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

Answer:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

14 more replies
Relevance 106.72%

It seems that no matter how I set this, after the next start-up it reverts to "15 minutes".  What registry key controls this?

More replies
Relevance 106.72%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

Answer:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

6 more replies
Relevance 106.72%

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

Answer:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

12 more replies
Relevance 105.56%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

Answer:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

2 more replies
Relevance 105.56%

MODS MOVE THIS TO THE RIGHT SECTION IF ITS IN THE WRONG?..thanks!

help me please! about "POP""IMAP""SMTP" incoming/outgoing mail server for Tbird....

i have no clue on what to do.. im stuck at a screen that says this





?..? said:



"Server Infomation"
"Select the type of incoming server you are using"
"[_??_] POP [_??_] IMAP"

"Enter the name of your incoming server (for example, "mail.example.net")."

"Incoming Server: [___????????????????___]"
______________________________________________________________________

"Uncheck this checkbox to store mail for this account in its own directory. that will make this account appear as a top-level acount."

"[_??_] Use Global Inbox (Store mail in Local Folders}"

"Enter the name of your outgoing server (SMTP)(for example, "smtp.example.net")."

"outgoing Server: [___????????????????___]"Click to expand...


 

Answer:help me please! about "POP""IMAP""SMTP" incoming/outgoing mail server for Tbird...

afaik hotmail does not provide pop\imap or smtp for free you may get it if you pay for the hotmail service but i would not recommend you do that just so you can get pop\imap or smtp

hrrm tbird and hotmail from the thunderbird faq
Can I access my Netscape WebMail or Hotmail accounts through Thunderbird?

No. Netscape WebMail and Hotmail use proprietary protocols. To access WebMail directly through an e-mail client requires you to use Netscape 6+ with AIM; to do so with Hotmail requires either Microsoft Outlook or Outlook Express. Of course, you can access your WebMail account on the Web at http://webmail.netscape.com/, or Hotmail at http://www.hotmail.com/.
 

8 more replies
Relevance 105.56%

Does anyone know if its possible to autofill the "from field" as a rule, when your in "another users /delegates" mailbox, so you dont have to add their address in the "from field"? (so it will autopopulate with their email address (and show "on behalf of")?
I hope this was clear.

thanks.
 

Answer:Solved: outlook 2007 "from field" 'on behalf of" issue

No ... its not possible if the user has more than one delegate (that has added them with the applicable rule). from that point on, they will have to choose which person they want to add to "sent" on behalf of field.

However, If they have just one (one only) user who has added them with that permission (to send on behalf of), it will auto-populate with that user.

So, It does not matter even if they are "in" a specific users mailbox (and expect the "on behalf of" to auto fill with that users name). If they have more than one delegate that has added them with that permission, they will still have to choose which user the message will sent "on behalf of"

i figured this out by trail and error etc
 

1 more replies
Relevance 105.27%

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

Answer:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

9 more replies
Relevance 104.11%

Windows 7 Home Premium

I would provide a screenshot (or three) however that is at the crux of my problem - I should perhaps say my current problem...now, with "7" (I am beginning to tire RAPIDLY of 7, much more quickly than I did with either XP, or Vista).

PROBLEM: When I attempt to "Save As" a document (Notepad, for instance), or even a Paint image, I get a window/page/screen/whatever, that has no "Buttons" ... no button to "Save", no button to "Cancel". Simply NO BUTTONS???

I had this problem the other night, and we "faked" or cheated our way through it, by using the Enter (Return?) Key to advance the cursor (cursor??) to where we wanted to be (well, we "hoped" we were "there", anyway, since we could not "see" what button or drop-down dialog box was selected or highlighted).

It's almost as if I had a "Resolution" problem, whereby the resolution is set too low (say, 800 x 600), things are too big to be seen/won't FIT on the page. However, my resolution is set to the "Recommended" 1366 x 768.

Please help...this Netbook would be a WHOLE LOT easier to throw against a wall than my desktops ever were . . .

Thanks in advance,
glenn . . .
PS, Hoping I was/am clear here...under the drop-down boxes of "File Name" and "Save as Type", there is nothing to select - not "Save" or "OK" or "Cancel" ... NOTHING????... Read more

Answer:No "Buttons" to "Save" or "Cancel" in Dialog Boxes WIN7

Hi,

Type dpi into the Search box and choose "Make text smaller or larger" at the top of the search result list. In the window that opens see what it is set to. You want it at 100% rather than 125% or 150%. So if higher than 100% change it back to 100%. Hit Apply. You will need to reboot. See if that helps.
 

5 more replies
Relevance 104.11%

Hey there...I found a folder that I've never seen in my D partition before...I partition my hdd into 3 parts...C=OS installation...D=Programs and Games...E=Misc downloads and music and pr0n ...

Well I've never had a virus or anything in my D partition before...I just found this folder named "winnt" and it had some bat files and some kind of Airline JScript and something that looks like an airplane tracker...

Then in a folder named sdata (still in the winnt folder) there's files like 911, police, air, fire, etc...OMFG!!! This is like some terrorist thing or something...FBI is gonna find me and I'll never see the light of day again!!! I'll miss the [H] and I haven't even watched LOTR Extended Platinum Collectors DVD thing (the big ass package with those book holder things)...I haven't even completed Doom 3 or started playing HL2 or even had a chance to buy an X-Box and play Halo 2!!!

AHHHHHH!!!!!! WTF is this crap on my computer??? I'm gonna delete this...I should delete it right??? Scans say it isn't a virus but what do they know...I'm screwed...

THANX
C'YA
 

Answer:OMG!!! Found some folder with files like "911" "police" "air" and a airplane tracker!

if youre os is on C: there shouldn't be a winnt dir on d:, should be safe to delete it.
 

7 more replies
Relevance 104.11%

Ok so I'm using a custom visual style made by another user however I don't really like the buttons used that I mentioned above. The creator states it is acceptable to change the theme to however you like as long as you don't redistribute it anywhere.

Ok so I opened up the .msstyles file (using Restorator) located in the theme folder of this VS. I went into the images directory and located what seems to be the images used for the buttons. Intuitively, it seems like it would make sense to replace those images with different ones (perhaps from another visual style) and it should change them. However, would this actually work? Could the theme get messed up in some other way (like proportions or something if the new button images are smaller)? I don't know of any other way to change them that would be easy.

But I did run into another problem. For some visual styles I can't even locate those buttons in the images directory. Where else would they be?

Answer:Changing the "minimize" "maximize" and "close" buttons of a theme

Use Windows Style Builder to do that...

9 more replies
Relevance 104.11%

I am using Windows 7 on my laptop and I have question about when to use "Home", "Work" and "Public" profile.

If I am logging in without setting password, and I am logging in network with "Public" profile, then will any other user, who can see my computer, be able to enter my computer and check the contents on my computer ?

I am connecting to a network and there are 6 other users connected to this network. In the set network location window, if I select the netwoek as "Home", does it mean that other 6 users will not be able to see my computer on network and if I use "Public", then all other six users will be able to see my computer on network ?

Thanks

More replies
Relevance 104.11%

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

More replies
Relevance 104.11%

Please help review my HijackThis File. My computer has problems with "Redirected Searches", "Advertising Pop-Ups", "Fake Anti-Virus Pop-Ups".

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 11:46:28 PM, on 10/24/2010
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16876)
Boot mode: Normal

Edit by chaslang: Inline HJT log removed. READ & RUN ME FIRST. Malware Removal Guide sticky not followed.
 

Answer:"Redirected Searches", "Advertising Pop-Ups", "Fake Anti-Virus Pop-Ups"

Welcome to Major Geeks!

Please read ALL of this message including the notes before doing anything.

Please follow the instructions in the below link:

READ & RUN ME FIRST. Malware Removal Guide
and attach the requested logs when you finish these instructions.

**** If something does not run, write down the info to explain to us later but keep on going. ****
Do not assume that because one step does not work that they all will not. MGtools will frequently run even when all other tools will not.
After completing the READ & RUN ME and attaching your logs, make sure that you tell us what problems still remain ( if any still do )!
Helpful Notes:

If you run into problems trying to run the READ & RUN ME or any of the scans in normal boot mode, you can run the steps in safe boot mode but make sure you tell us what you did later when you post logs. See the below if you do not know how to boot in safe mode:

Starting your computer in Safe mode

If you have problems downloading on the problem PC, download the tools and the manual updates for SUPERAntiSpyware and Malwarebytes ( links are given in the READ & RUN ME) onto another PC and then burn to a CD. Then copy them to the problem PC. You will have to skip getting updates if (and only if) your internet connection does not work. Yes you could use a flash drive too but flash drives are writeable and infections can spread to them.
If you cannot seem to login to an infected user account, try using a different user... Read more

5 more replies
Relevance 104.11%

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

Answer:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

5 more replies
Relevance 104.11%

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

Answer:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

5 more replies
Relevance 104.11%

Hi, my sister dropped off a gateway MT3432 laptop and when i turned it on, nothing works, It starts up but nothing shows on the screen. I hear the system booting up and spinning off the hard drive but cant get to the BIOS screen or nothing. I tried plugging in an external monitor and still nothing. I don't know what the deal is. Plz Help. I replaced the ram and the harddrive and still doing the same thing.

Answer:GATEWAY LAPTOP WONT BOOT """"HELP""""

Did your sister say she had did anything to the machine?  Played with registry? dropped it?

3 more replies
Relevance 104.11%

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

Answer:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

6 more replies
Relevance 104.11%

I'm running Microsoft Outlook 2003 SP3, Part of Microsoft Office Professional Edition 2003. I have a problem, which many others seem to have had, in that I'll open my Sent folder, and instead of the "to" field being present, I find that it has (uncommanded by me) changed to the "from" field ... and similarly sometimes the inbox folder will display the "to" field instead of the "from" field that was there the last time I looked at it. There are at least two other threads in these forums ( techguy.org/557884 and techguy.org/714272) that are about the identical issue. These were written years ago, but I can't see that anyone has had a solution for preventing this from happening. Post numbers 11 and 17 in the thread techguy.org/557884 seem to indicate that the CAUSE is related to searching mail folders - this seems to correlate to my own experience - perhaps even that it occurs only when I search across multiple mail folders for an item (setting the "search in" field of the "look for" function to "All Mail Folders". Now I know the joke about the guy who went to the doctor and said, "Doc, my arm hurts when I hold my hand over my head like this. What advice do you have?", to which the Doctor said, "My advice? Don't do that." But that is NOT the answer I want in this case. I need to be able to search mul... Read more

More replies
Relevance 104.11%

I have a bunch of rules set up to categorize my email. I made them all using the rules wizard. Unfortunately, if I want more than one condition in the email, for example from someone and containing particular words in the body, it seems to have to be an "and" statement--no "or" statements. I would like to set up a rule that says to categorize based on meeting one or another condition, either or.

Right now I just have to have more than one rule for a given category to account for the various conditions. It would be so much nicer if I could combine some of these rules somehow. Is this possible?

Thanks
 

More replies
Relevance 101.79%

I have a W7 32bit laptop and I do not have MS Office installed. I have been using Hotmail until a couple weeks ago when I was "converted" to outlook.com email - which I like OK. When I'm using a browser - IE9 in this case - and when I click on "send link as" or "send page as", it launches Windows Live Mail and puts me in a WLM output email. I would instead like it to launch me into outlook.com and an outlook.com output email. How can I do this - or can't it be done at all?

If I've posted to the wrong board plz let me know which board to post it to.
Thank you in advance for your help.

Answer:Outlook.com vs. WLM when "send link as" or "send page as" is clicked

How to Make Windows Live Hotmail Your Default Email Program - About Email

5 more replies
Relevance 101.79%

I do not know what I did. When I opened a message it open it "Message"; now it opens in "File". How can I get it back to open in "Message"?

Answer:Outlook 2016 - Message opens in "File", not "Message"

If you minimized the Ribbon, this caused it. Open a message and maximize the ribbon.

1 more replies
Relevance 101.79%

Ok, so basically, whenever I turn the computer on, 3 error messages appear:

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee.exe

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee1.exe

- Error loading H:/Archiv~/GBPLUG~/gbiehcef.dll. Couldn't find specific module.

(sorry if some terms are incorrect, my computer is in Spanish, to I tried to translate as best as possible)

Please help me solve this terrible problem, it is really getting me on my nerves! (oh, and if this helps, I've recently donwloaded this so called "Limewire acceleration", and whenever I ran the setup, it didn't work. I don't really remember the name of the website I downloaded it from, sorry...)

Answer:Can't Open "My Documents", "Trash" or other files in "My Computer"!?

Hi and Welcome to the forum

I am almost certain that you have malware problems. Most like caused by you doing file sharing/ P2P - Limewire.

Suggest that you go here and follow the directions:

http://www.techsupportforum.com/secu...oval-help.html

Please be advised that the malware people are very busy and it could take a couple days to assist you.

BG

1 more replies
Relevance 101.79%

Hi
I have recently updated to the creator version
My files end up in unintended destinations. When I click in the documents tab in the sidebar of the documents screen, it takes me to a ?Documents? folder that appears in ?One Drive? group. Any files that I send from my desktop end up there
Those files are also shown when I open the first ?Documents? folder that appears in the ?Quick Access? group. I have similar problems with ?Pictures? folders
I have attached screen shots that I hope will explain. I want all my files of any description to end up in the ?Documents? folder contained in the ?This PC? group. Can anyone help please?
Incidentally, I don?t understand the purpose of ?One Drive?, and don?t believe that I will have a use for it. Can I remove/disable it?

More replies
Relevance 101.79%

Guys,

I am a little confused with regard to some of the mail options in Outlook Express. (I have version 6) What is the difference between the "Drafts" and "Outbox" folders?

Further how does the "Send Later" option work from the file menu? I always thought that "Send Later" was the same as using "Drafts" but what happend was that I was doing an e-mail, went to Drafts, or clicked on "Send Later" or Outbox and then after I clicked on "Send" doing a regular send, I checked my Sent folder and about 3 copies of the same message were delivered to the same person! (I only sent one message-not 3!)

What is the deal with the "Outbox" folder? Apparently that is not like the Drafts folder....correct?

What's the difference between doing a Save, Save As, and Send Later with regard to OE functions? If I want to save a message that isn't done yet, which of these 3 options should I use? (I.e, I want the message to go to the Drafts folder for example and stay there until I TELL OE to send it.) I think whatever I did above was that I modified my message and then click on where it just automatically sent next time I opened the message. A review of these features would be helpful!

Just for the record, I also use Yahoo Mail and find that so much easier!

Jack
 

Answer:Please Review OE "Send", "Drafts", and "Outbox" Options

Jack
To save an E-Mail to your Drafts folder for work on later then you use the File\Save option.
If you wish to save the E-Mail in another format such as .EML or .TXT or .HTM then you use the Save as function. You will also be required to specify a folder to save in or use its "My Documents" default.
Send later function if only one e-mail account exists will place the e-mail in the outbox and send it the next time you click on the send receive button. If you have multiple accounts then you can specify which account to send it from.

Dave
 

2 more replies
Relevance 101.79%

Hi:

Looking for insight/advice re: KB3054476.

According to Infoworld, it was "Optional" in May, but I was not offered it then.
This week, it was offered as "Important" and "Recommended" (!), but only for one of my 2 Win7/64 boxes.

I have read the MS KB article, as well as THIS FORUM THREAD, the latter of which includes a report of a BSOD due to this particular update.

However, there isn't much out on the web about it.
And most of the discussion about it is overly technical for me.
And I am confused as to why it was previously offered as "Optional", but now is "Important" or "Recommended".

I don't *think* I "need" it (as I have no webcam on this box). And I don't like to tempt fate by fixing things that are not broken.

So, 3 questions:
Is it safe to install?
Is it really necessary/important?
Or would I be OK to hide it?
Thanks very much in advance!

Answer:KB3054476 offered as "Important"/"Recommended"/"Optional"

The status of updates changes with circumstances.
If an update isn't relevant, it won't be offered at all.
If however it's relevant but the related software is not apparently in use, it may be 'optional' - and gravitate to 'Recommended' or 'Important' if the related software is in use.
It can also be promoted through the hierarchy by MS depending on feedback through WU and error-trapped feedback.


If you have (and use) a webcam, then it's probably best to install the update.

4 more replies
Relevance 101.79%

I tried to associate the file extension .txt to a new editor program
with the well known cmdline programs ASSOC and FTYPE.

No, assigning them through WinExplorer menu does not work.
But this is another problem which should not discussed here.

When I type now one of the following alternative commands at the CommandPrompt then Win7 returns me something like:

assoc .txt=txtfile

"Access denied"
The following error occurs: .txt"

or

ftype txtfile=D:\notepad++\notepad++.exe "%%1"

"Access denied"
The following error occurs: txtfile"

Why?

The command above work fine under WinXP

Peter

Answer:"access denied" when using "assoc" and "ftype" from cmdline?

Question:

Did you run cmd.exe with administrative previlliges?
Elevated Command Prompt

3 more replies
Relevance 101.79%

hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane

Answer:Remaking "My Music", "My Pictures", "My Videos" folders

  
Quote: Originally Posted by Legume


hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane


You have a backup from before the problem started? a win 7 dvd to do a repair install?
ken

4 more replies
Relevance 101.79%

I thought I was computer savvy until this problem came up. When I double click my computer, recycle bin, control panel, etc, the hourglass comes up for a few seconds, goes off, and nothing else. No error messages or anything, just nothing. I have viewed a few of the threads covering this and a common link was the hijack this result. I have posted that here, and really hope that someone can help me with this. I have run SpyBotSD and adaware, I have run mutiple virus scans, I did an SFC, and the final thing was to repair windows using the original disk, none of which has help. I am running Window XP w/SP2. Any other suggestions would be certainly appreciated. Hope to here from someone soon. MTCS, out.

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\TDSTEL~1\ENTERN~1\app\pppoeservice.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Hewlett-Packard\Toolbox2.0\Apache Tomcat 4.0\webapps\Toolbox\StatusClient\StatusCl... Read more

Answer:I cannot open "my computer" "control panel" "recycle bin", etc...

You may want to reinstall the operating system.

Backupthe files that are importantto you before you reinstall.

The "New" installation will overwrite the current one

If you do not format your hard drive before the reinstall the installation should not harm your files (That's why I suggest backingup your files) and will speed up the installation process.
 

1 more replies
Relevance 101.79%

OK.....
As I said I am new.....
Hope this info is the way you need it.
MANY MANY THANKS IN ADVANCE FOR THE TIME & HELP !!!
Check out the following .....HHEELLLPPP


Logfile of HijackThis v1.98.2
Scan saved at 12:38:36 PM, on 11/12/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\logonui.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\WINDOWS\System32\Promon.exe
c:\program files\mcafee.com\agent\mcagent.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\Program Files\interMute\AdSubtract\AdSub.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\WINDOWS\System32\NMSSvc.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\McAfee.com\VSO\mcshield.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.dellnet.com
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Micro... Read more

Answer:NEW THREAD / "xads", "xlime", "Context3.kanoodle"

hi

how to create a folder ?

right click anywhere in your desktop
click new,a tab opens ,click folder ,name it hjtantivirus .

download again hijackthis and install it in the new created folder .

your hjt is here now
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

it will not work properly if it stays there .

and don t create a new thread ,keep only one thread .this one ,now .

1 more replies
Relevance 101.5%

"";"C:\Windows\System32\services.exe";"Trojan horse Dropper.Generic_c.MMI";"Object is white-listed (critical/system file that should not be removed)"

There are a lot of other trojan horse walkthroughs, if someone can point in the right direction more specific to my horse droppings... :cry

Brand new computer... and AV wasnt the first thing to get downloaded... doh!
 

Answer:C:\Windows\System32\services.exe";"Trojan horse Dropper.Generic_c.MMI"";"Object is

Re: C:\Windows\System32\services.exe";"Trojan horse Dropper.Generic_c.MMI"";"Object i

Welcome to MajorGeeks, thernbear

Delete items using RogueKiller.

Double-click RogueKiller.exe to run. (Vista/7 right-click and select Run as Administrator)
When it opens, press the Scan button
Now press the Delete button.
When it is finished, there will be a log on your desktop called: RKreport[3].txt
Attach RKreport[3].txt to your next message. (How to attach)

__

- Rescan with HitmanPro, when it finds services.exe - Virus, allow it to Replace by clicking the down arrow next to the detection and choosing Replace.
If Desktop.ini - Trojan if detected again, you can allow HitmanPro to Delete this but Ignore any other detections from the time being.
Afterwards, click the Next button.
HitmanPro may want to reboot the PC in order for the changes to take affect, please do so.

__

Once you are back in Windows, run another scan with HitmanPro and then attach the latest hitmanpro.zip log. (How to attach)

__

Completely delete these two folders manually using Windows Explorer:
c:\windows\installer\{0f7e99ff-f00f-32b4-d531-ecd74ed08177}
c:\users\#2\appdata\local\{0f7e99ff-f00f-32b4-d531-ecd74ed08177}

Let me know if you were successful or not.
 

3 more replies
Relevance 101.5%

First things first, thanks to all who can help.....





I need to programmatically make some adjustments to the Internet Explorer security settings. Most of these settings I have found but there are a few I have not been able to get a clear exact location for in the registry. I will be using a .BAT file to make
the adjustments on 100+ PCs.





Here is what I am looking for.....





Under the "Internet  Properties" found in control panel, under the "Privacy" tab there is an "Advanced" option button. When I click on it I get an "Advance Privacy Settings" options box. On it are several settings.
The first setting, "Override automatic cookie handling" needs to be checked in order to access the other options. I can do that by adjusting the DWord value of "PrivacyAdvanced" under the "Internet Settings" key in the registry,
"HKCU\Software\Microsoft\Windows\CurrentVersion\Internet settings", to be specific.





What I have not been able to find are the registry entries for the "First-party Cookies" "Accept, Block, or Prompt" options, the "Third-party Cookies" "Accept, Block, or Prompt" options, and the "Always allow
session cookies" check box. Please see picture below....















I have seen references to the following settings as being where those options exist, but nothing that explains ... Read more

More replies
Relevance 100.92%

Hi,

My organisation has just rolled out an Exchange 2007 Server.
I am a desktop support engineer for my unit. We are setting up access to the server through Outlook 2003.

A small number of Outlook 2003 users get this error message when they are using a .prf file to configure their clients.

"Your Exchange Server administrator has blocked the version of Outlook that you are using. Contact your administrator for assistance."

This is XP SP2 running Outlook 2003 (error occurs on Office, Office SP2 and Office SP3) connecting to Exchange 2007.

I have tried tried applying SP2 and SP3 to Office and completely reinstalling Office but it still occurs.

I am told by the Server Administrators that this is a local problem so I am not getting any help from them. I tend to believe them that it's not server side because I set one of the profiles up on two PCs next to eachother. On one it worked fine but on the other it had this error message. I could not see a difference in the two Outlook installations.
I have read this article here http://support.microsoft.com/kb/924625 but a lot of the questions it asks and tests involve having administrator access over the server which I do not have.

Does anyone know of anything in the local Office installation that I do have control over that has been known to cause this?

All the best,

mantis484
 

Answer:Solved: Outlook 2003/Exchange 2007 - "Your Version of Outlook has been blocked..."

Hi we managed to find the solution so I'm posting it here to help others.

We inherited a number of builds that were done by other companies. It appears these builds have in the past had previous versions of Office installed. This has resulted in registry keys lurking around from the old installs.

Once we removed these registry entries it worked.

Best way to do this that I could think of is to

1) Uninstall Office and then search the registry for any references to Outlook. You can do this using AML Free Registry Cleaner http://www.amltools.com/ (which has a search function). Ignore any hits for Outlook Express you are only insterested in Office Outlook.

2) If this is the problem that you are having then you will find registry entries in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\7.0 or 8.0 or 9.0 etc.

3) Delete any Outlook folders in the above tree. Onc eof the keys in the Outlook folder will be Version and this appears to be what is being read when the server asks what version you have.

4) Reinstall Office - it should now work.

All the best,

mantis484
 

1 more replies
Relevance 100.05%

As title says: New Mail and Calendar (Insider) app brings "Focused" mail in Inbox.

Too bad that user don't have more customization options. Some mail is put in "Focused" slot in Inbox. In my case, MS put some mail from last year in it. Option to put all mail from selected sender would be "a must" for such an option.
So, only smart thing for now is to go to Settings / Reading / at the bottom there is option to turn "Focused" to off.

Edit: I have to correct myself. Right click on single post gives user a choice to move selected post in Focused (or in other from Focused) or "Always move to Focused". Which should work just fine, if one have a lot of posts in his /her Inbox.

Answer:New Mail and Calendar (Insider) app brings "Focused" mail in Inbox

I got this this morning when I opened Mail after the update:

17 more replies
Relevance 99.76%

I have Outlook 2010 and Windows 8.1.  When attempting to open e-mail in Outlook 2010 or documents in Word I get the following error:
"Outlook could not create the work file.  Check the temp environment variable."
I've read several Microsoft KB articles and several forums on this issue.  According to these articles, This problem occurs when the Cache string value in the registry doesn't point to a valid directory.  The solution provided is to:
Locate and then click the following subkey:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
Right-click the Cache key, and then click Modify.  Then modify the sting value to:  %USERPROFILE%\AppData\Local\Microsoft\Windows\INetCache
When performing this step, the cache value was already set to the value above.  I attempted to overwrite by typing the same value for the string, but that did not solve the problem.  I attempted to change it to a different value, save it, and then
modify it to the correct value and save it, but that did not solve the problem.  I also attempted to go in to the INetCache folder under Users\"user"l\AppData\Local\Microsoft\Windows\INetCache, rename it, recreate a new folder and copy all subfolders
into it, and that did not solve the problem.  
I am out of things to try from the user forums I have researched.  Appreciate any insight anyone might have on how I can solve this problem.

More replies
Relevance 99.76%

When I get into the outlook application i get this message and the application freezes

Answer:I am using windows 10 and i get "Outlook could not create the work file" It is MS Outlook 2013

Check your drive for errors and run scanpst.exe on your pst's and ost files. Generally this is one of the signs of a corrupt mail database which is why Microsoft has been pushing for a few years now to get rid of them.
Other possibility is with the temporary file store location. You can find a write up about it here. Outlook could not create the work file

2 more replies
Relevance 99.76%

I'm getting: "A problem cause the program to stop working correctly. Windows will close the program and notify you if a solution is available". This happens within minutes of starting Outlook (in the non-safe mode)

Outlook works in safe mode.
I cannot turn off the addins.... see attached
Also attached is a snapshot from the event viewer...
Thoughts???
Thank you
Running Windows 7 Home Premium Edition (64 bit) SP1
Computer: Dell XPS 435T/9000
Microsoft Office Professional Plus 2007

Answer:Outlook 2007 "Microsoft Office Outlook has stopped working"

since when are you getting this error. have you tried a repair install from control panel >add/remove programs. you can also let this tool "microsoft office diagnostics" check for errors & fixes.

7 more replies
Relevance 99.47%

Hi Guys, any ideas how to access my external hard drive [TOSHIBA MK3029GACE] device manager can see it but it does not appear in disc management.

I use this HDD perfectly in my car HDD player. But when I try to connect it to my Laptop, it does not show up in disk management.

Please check the attached screen shot..

Thanks for the help....

Answer:HDD shows in "Device Manager" but not in "DiskPart"or" Disk Management

Specs show that drive has a ATA-6 interface (P-ATA, or IDE). How are you connecting this drive to your laptop? Does the laptop have a PATA or SATA connection? Does it use an adapter?

1 more replies
Relevance 99.47%

Hello everyone
I have this problem for more than 3 months for now...

The INSTRUCTION AT "0x00a96ce0"referenced memory at "000000000" couldn't be written".

That's always what i get when i restart my computer,just before screen goes dark.
I believe that it has to do something with Microsoft updates.The reason i believe this, is that i once reinstalled my PC and didn't have any problem until i didn't update my PC.
And i posted here that thinking my problem was solved but unfortunately i was wrong.

Please if you have any tips on this one let me know it would be greatly appreciated.

Thank you!
 

More replies
Relevance 98.6%

I am trying to create a formulas to analyze 7 column of dates and return a "no" if any date is less than today or an "okay" if all dates are after today. This is my formula that doesn't work.

=IF(D3<"TODAY",IF(E3<"TODAY",IF(G3<"TODAY",IF(H3<"TODAY",IF(I3<"TODAY",IF(J3<
"TODAY","NO","OKAY"))))))

What have I done wrong?
 

Answer:If columns<"Today","NO","OKAY"

Frankie6925 said:

I am trying to create a formulas to analyze 7 column of dates and return a "no" if any date is less than today or an "okay" if all dates are after today. This is my formula that doesn't work.

=IF(D3<"TODAY",IF(E3<"TODAY",IF(G3<"TODAY",IF(H3<"TODAY",IF(I3<"TODAY",IF(J3<
"TODAY","NO","OKAY"))))))

What have I done wrong?Click to expand...

Today should be Today().
 

3 more replies
Relevance 98.6%

I have been playing the game for a few weeks now in my spare time on my Windows 10 desktop and have acquired some bonus packs, a dozen vehicles, upgrades, unlocked 5 seasons, and moved my user rank up to 4824 in the multiplayer ranks amongst various other things. I do not want to lose my progress but for the first time i wanted to upload a ghost the other day and seen that (it seems) I will lose all progress if I log into Facebook now. Also, I noticed that my "local account" doesn't transfer my save data when I log into the game on my Windows 10 laptop (which is super inconvenient because I am rarely home). I seen topics posted that a Facebook sync fixes this but I am afraid I will lose all my progress.
Anyone have any experience with this?

Answer:On Windows 10: "Asphalt 8 Airborne" can I sync my "local account" with my "Facebook Account?"

I am with you on this. I'm having the same problem, and the Customer Care form at Gameloft is not set-up yet for inquiries on desktop platforms. Also, search engines are hard to trigger relative informaiton on the subject. I have no intention of changing over to my Facebook "version" if the progress isn't going to be transferred.
It's just a new problem brought around to headline the Windows 10 updates. I'm sure there will be a wait time, but there has got to be a flood of new Win10 users that are firing up their CC services for a fix.
If I find out that it fixable, I'll get back to this thread.
Jerry

2 more replies
Relevance 98.6%

Hi all
Previously the  "Save Picture"  box would put a web generated title in the box and automatically selected JPEG.  Now the title box reads "untitled" and the only file options offered are "png" & "bmp" 

Please note that a similar post has appeared, but the solution did not match the fault.  I'm seeking to restore the automatic response to save picture, that might have been upset by antivirus clean-up programme.

Thank youin advance for considering my problem

More replies
Relevance 98.31%

Hardware: Toshiba Satellite P105-S6177 System: Vista Home PremiumMemory: 2GB RAM, 120GB DriveProcessor: Centrino Duo 1.73GHzChip Set: Intel 945GM ExpressFurther Explanation:User Choice:      System ActionShut Down      RebootHibernate         RebootSleep         Sleeps... but won't come out of SleepFurther Explanation and Attempts:Using the Toshiba Power Management feature does change choices of action but the outcome is the same as choices from Vista menu. For instance, if I choose to have the system Hibernate when the lid is closed, the system goes into hibernation momentarily then restarts, or if I press the power button, the system shuts down then immediately restarts.I can use the command line: ?rundll32.exe powrprof.dll,SetSuspendState? and the system will go into hibernation but then immediately restarts.The only way to turn-off this computer is to hold the power button for 5 seconds or more and then when powering-up again, I get the nasty Microsoft warning that the system didn't shut down properly last time and do I want to start in safe mode or normal, etc, etc with all it's slow checks with this type of startup.The Sordid Story:I just purchased this Toshiba Satellite P105-S6177 from RefurbDepot. I know, that's my first problem. Secondly, they did not include a manual or recovery disks. When calling ... Read more

More replies
Relevance 98.31%

Hi - I have a thinkpad x61t. When it's in the docking station, whenever I press "shift" "alt" or "ctrl" a little pop up window tells me that key is being pressed. The laptop does not do this when it's out of the docking station. I've looked all over the control panel in vista and can't find any setting.

Any ideas how to switch it off? Driving me nuts! Thanks.
 

Answer:"shift", "alt", "ctrl" appear onscreen when pressed (see pic)

You mentioned that you have looked in the Control Panel so this may be something you tried already:

Control Panel - Ease of Access Center - Make the keyboard eaiser use - uncheck 'Turn on sticky keys'.
 

2 more replies
Relevance 98.31%

One feature I really liked in XP was the ability to look in a folder through My Computer and sort the files by extension. For example if I wanted to get all .jpg files to one side of the folder as I looked for a file, I could click View, Arrange Icons By, Type and make that happen. I don't see that feature in Windows 7. I'm using W7Pro and can't find that or a similar feature anywhere. Is it here and I just haven't found it? TIA

Answer:Where is "VIEW", "ARRANGE ICONS BY", "TYPE"

open a window ,click organise/layout /menubar.
then when you click view in the menu bar group by is in the list

3 more replies
Relevance 98.31%

Windows XP SP3
WMP 11

When I open a media folder & select Play All on the Explorer left pane I get the "Copy to" selection window and then the "Move to" window. When I cancel these the files load into WMP 11.

Anyway to get rid of the "Copy to" & "Move to" commands, so that it just loads the media files in WMP 11?
 

More replies
Relevance 98.31%

Hey everyone,

Unfortunately, my computer has been infected with a particularly virulent, or relatively new, virus (for which I am currently awaiting help on the Malware removal sub-forum). I wanted to ask, though, if anyone else has had to deal with this particular Trojan before because, from what I have been able to find out, it (i.e. Trojan_Win32.Generic, or "TidyNetwork.com") doesn't seem to have a remedy as of yet. I've checked just about every virus database I could and have come up empty handed every time. What's more, I've downloaded and ran half a dozen different top-shelf Anti-virus' scans and removal programs, only to end up disappointed.

Does anyone know what the deal with this thing is?

Best,

John
 

Answer:"Trojan_Win32.Generic" a.k.a. "TidyNetwork.com" & "Strongvault"

Please do not start another thread for the same issue.

I'm sure someone will be along to help you in your other thread soon.

Closing duplicate.
 

1 more replies
Relevance 98.31%

Recently after updating Windows 10 to Fall Creators Update (1709) (I think this started to happen after clicking the "forgot password" button on the sign in screen, just a theory), all messages on the shutdown/boot screen in Windows (for example "Shutting down", "Restarting", "Welcome", ...) became replaced with "Just a moment". It isn't a huge inconvenience, but "Working with updates" also got replaced by it, so I don't know if the computer is installing updates or is stuck at shutting down for example if it takes a long time.
I don't expect anyone to have a solution, I'm just wondering if someone else has this problem. SFC and DISM didn't help me, changing the system language did not help.
 

More replies
Relevance 98.31%

Hey guys. This morning I got a really strange error code. When I tryed to update Steam on my PC, this error message popped up;

"The instruction at "0x00172058" referenced memory at "0x00d1004". The memory could not be "read".

Click OK to terminate the program.

Lately, I have'nt been able to install WoW either, I install it all the way to 100% and then when I try to launch it, I obviously have to re-download all the patches but it prompts me that I have to install it again, even though it is all there.

Tryed downloading the full game digitally off of wow-europe.com too, I click run to get it started, nothing happens and then this message pops up.

"The instruction at "0x00182058" referenced memory at "0x0f070014". The memory could not be "read".

Click OK to terminate the program.

I don't know what's up with it. My freind told me to run a CHKDSK /R to see if there was anything wrong with my drive and it ran smoothly, although I must say it took about an hour or so.

So, that was complete, tryed to do it again and I still kept getting these error messages. But I saw something on my desktop that wasn't there previously. It is an error log. Here is the error log;
#
# An unexpected error has been detected by Java Runtime Environment:
#
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d5ecb6d, pid=1584, tid=1248
#
# Java VM: Java HotSpot(TM) Client VM (11.0-b16 mixed mode, sharing wi... Read more

More replies
Relevance 98.31%

hi. i'm new here. nice to meet all of you!
just like a lot of folks i'm sure, i've come here because there are some weird things running on my pc that shouldnt be in there.
please help!!!!!!

heres the hijack log
(thanks in advance. i don't know much about this computer virus stuff.)
~eric

Logfile of HijackThis v1.99.1
Scan saved at 10:06:40 AM, on 9/5/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Dantz\Retrospect\retrorun.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\ZoneLabs\vsmon.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb09.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\WINDOWS\SYSTEM32\qttask.exe
C:\Program Files\Java\jre1.5.0_01\bin\jusched.exe
C:\PROGRA~1\VERIZO~1\HELPSU~1\VERIZO~1.EXE
C:\PROGRA~1\VERIZO~1\HELPSU~1\SMARTB~1\MotiveSB.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\PROGRA~1\Sony\SONICS~1\SsAAD.exe
C:\Program Files\Common Files\Verizon Online\ConnMgr\cmisrv.exe
C:\Program Files\Windows Media Components\Encoder\Wmencagt.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\ZoneLabs\isafe.exe
C:\Program Files\Common Files\Verizon Online\AppMgr\vz... Read more

Answer:"windows no disk" and "winsilly" "win956temp"

11 more replies
Relevance 98.31%

OK...
I'm looking for some help getting rid of theses creeps!
I have tried several programs including Spybot, Spyblaster, Lavasoft, Mcafee, etc. etc. with no luck.
I'm new to HijackThis but here we go..... ]

Logfile of HijackThis v1.97.7
Scan saved at 11:59:09 AM, on 11/12/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)SIZE=5]

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\WINDOWS\System32\Promon.exe
c:\program files\mcafee.com\agent\mcagent.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\Program Files\interMute\AdSubtract\AdSub.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\WINDOWS\System32\NMSSvc.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
C:\Program Files\McAfee.com\VSO\mcshield.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Program Files\Internet Explorer\IEXPLORE.EXE
G:\HijackThis.exe
G:\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Mi... Read more

Answer:(I'm new here) help w/ "xads", "xlime", "Context3.kanoodle"

hi pdx

please download the new hijackthis from here
http://www.majorgeeks.com/download3155.html


and install it in it s own folder like this :

C:\hjtantivirus\hijackthis.exe

scan again with the new hjt and post a new log .

1 more replies
Relevance 98.31%

One of our Win10 laptops has a context menu with "Properties" that uses shortcut key "r". The other uses key "o" which conflicts with "open". I have no idea how it got corrupted. Suggested locations in the registry for context menu doesn't list it. Software tools work on old windows or only delete/disable context menu items.
How can I fix this?

Answer:Context menu "Properties" uses "o" shortcut instead of "r"

I have no idea if this will work but the following tutorial has often helped me fix corrupted file & folder associations. Use option 2 for a few specific cases like Drive and Folder.

Default File Type Associations - Restore in Windows 10

2 more replies
Relevance 98.31%

How do I change the font of "Welcome", "Logging Off" and "Shutting down"? Is it hard coded in a uifile? Which file are the words in? Is the file written in XML?? John

Answer:Change font of "Welcome", "Logging Off" and "Shutting down"?

  
Quote: Originally Posted by RBCC


How do I change the font of "Welcome", "Logging Off" and "Shutting down"? Is it hard coded in a uifile? Which file are the words in? Is the file written in XML?? John


I am not sure you can change the fonts though if you wish you can change the text from "Shutting Down" to "Bye Bye" or so, by editing, winlogon.exe.mui.

3 more replies
Relevance 98.31%

Hi

Am running windows vista home premium with office 2007 professional installed.

About a month or two ago, I've noticed that whenever I close outlook, i get an error message:

"outlook has stopped working"

Everything seems to work fine otherwise, but this is a little annoying and I'm wondering if there's any way to either fix the problem or turn the error warning off.

Thanks
Kevin
 

More replies