Computer Support Forum

(Failed to load because of a critical system driver is missing, or corrupt)

Question: (Failed to load because of a critical system driver is missing, or corrupt)

File: \windows\system32\drivers\ltoxvyo.sys

status: 0xc0000225

Vista Home Premium.

need some help on how i can get this machine functional again.

i do have the vista installation disc unfortunately due to the short length of the SATA connectors from the power supply they simply do not reach the ROM drive while being connected to the hard drive at the same time.

if anyone needs any more info just ask.
help would be much appreciated,

Relevance 100%
Preferred Solution: (Failed to load because of a critical system driver is missing, or corrupt)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: (Failed to load because of a critical system driver is missing, or corrupt)

Hello and welcome to the forum...

Can you tell me if you can get to your main desktop if not have you tried to boot in safe mode. Here's how to boot in safe mode just in case.

Safe Mode

But please let me know if you can get to your desktop.

Tom

3 more replies
Relevance 101.79%

Hi everybody,

This is my first post on this forum. I've recently come across a problem with my computer. I'm running Windows Vista 32 bit. I shut the computer down one day, and the next day turning it on I came across this problem.

File: \Windows\System32\Drivers\nqgbwc.sys

Status: 0xc0000225

Info: Windows failed to load because a critical system driver is missing, or corrupt.

I have no clue what this means. It said insert windows installation disc and repair computer. I did this, self repair found nothing. I then tried system restore and it could not initialize which is a pain in the ass. My last resort is to reinstall windows vista but I think I'm going to lose everything.

If anyone has any advice or suggestions it would be greatly appreciated.

Thank you,
Kevin

Answer:Windows failed to load because a critical system driver is missing, or corrupt.

First see if you can boot into Safemode without it giving you that error. If you can, first try searching for that driver to see if its even in your system32 folder.

I recently just checked my computer and it is not in mine by default, which means its a file relating to a third party program/app that has been installed on your machine. If you can figure out what the abbreviation for NQGBWC is from the list of installed applications on your computer, then you can isolate which program on startup is causing the failure on booting windows due to the missing system file.

As you may have already tried, i cannot simply google search nqgbwc.sys as it gives me just THIS post only. If you cannot find the problem, then the only thing possible from there is to reinstall your OS but of course BACK UP EVERYTHING IMPORTANT FIRST.

2 more replies
Relevance 101.79%

windows \system32\drivers\ msisadrv.sys
 
Status: 0x000000f
 
would like to repair this without reloading if possible
 
thanks
Brett

Answer:windows failed to load because a critical system driver is missing or corrupt

I have a few questions:
1. Do you have a repair disc?
2. If not, does the PC have a recovery partition?
3. Can you boot from a live CD (such as Puppy Linux)?
4. What were you doing before the problem started?

7 more replies
Relevance 100.63%

File: \windows\system32\drivers\ksecdd.sys

Status: 0xc00000e9

Info: windows failed to load because a critical system driver is missing or corrupt.

Any help is appreciated. The computer will not even turn on or get past this point.
 

Answer:Info: windows failed to load because a critical system driver is missing or corrupt.

if your computer is telling you that window failed to load, that means you need to format the system and install in window on it, and you must do it before i damage your hard drive.
prince
 

5 more replies
Relevance 104.55%

Hi,

I have an old Acer Aspire 5672 WLMi with these specs

Windows Vista Business x86 SP1
Centrino Duo 1.66Ghz
2GB 666 Mhz RAM
Mobility ATI X1600 128MB

The laptop had been experiencing heating problems so I stopped using it for a while.
After I finally decided to clean up the cooling fan months later, it would appear that the OS got corrupted while sitting there...

I'm getting the following error:

File: \Windows\System32\Drivers\pvkqm.sys
Status: 0xc0000098
Info: Windows failed to load because a Critical System Driver is missing, or corrupt.

I know that a recovery disk might do the job, or I could simply reinstall a fresh copy of Vista/Win7.
The problem is, the optical device of this laptop is also broken. I cannot even access a bootable DOS
disk...

Is there any way for me to get around this problem without using a CD/DVD of some sort?
 

Answer:Critical System Driver is missing or corrupt...

7 more replies
Relevance 104.55%

Hello sevenforums, I am greatly needing your assistance. Earlier today I uninstalled avast! antivirus as it was hogging up more RAM that I wanted. After restarting the PC to my dismay it would not boot up, going into a system repair which would then fail.

I looked at the details regarding the failed repair and it said \windows\system32\DRIVERS\ACPI.sys is corrupt

I went into the advanced options and it would not give me a restore point or restore image to use.

I googled for hours regarding this issue and tried several fixes using the command prompt including chkdsk, bootrec, and finally I found this which seemed to pertain to where I was at in regards to fixing this myself:

"If the Bootrec.exe tool cannot locate any missing Windows installations, you must remove the BCD store, and then you must re-create it. To do this, type the following commands in the order in which they are presented. Press ENTER after each command.

Bcdedit /export C:\BCD_Backup

ren c:\boot\bcd bcd.old

Bootrec /rebuildbcd"

-It did find a windows installation when previously it wasn't, I crossed my fingers and restarted and still nothing.

Now when it attempts to boot it does not go into a system repair, instead, it immediately says:
-File: \Windows\system32\DRIVERS\ACPI.sys
Info: Windows failed to load because a critical system driver is missing, or corrupt.

It no longer gives me the option to go into system recovery, so I can no longer get into the command prompt, it would never boo... Read more

More replies
Relevance 103.32%

Scenario:
CMOS battery died. XP got corrupted somehow. I d/l'd Windows 7 Ultimate ISO from MSDN and made a bootable dvd. Installed Windows 7 from the DVD. When I boot up now, I get the following error:

Windows failed to load because a critical system driver is missing or corrupt.

Status: 0xc0000098
File: Windows\system32\DRIVERS\ql40xx.sys

Can anyone shed some light on how to resolve this?

Thanks,

Evan

Answer:Windows failed to load b/c driver is missing or corrupt

: QLA40XX iSCSI Host Bus Adapter
Description: QLogic iSCSI Storport Miniport Driver
Company: QLogic Corporation File size: Various

Go to website of that company and try to download driver.

You may have to use another compter and download to a finger drive etc.
Once you have it, you can boot from the Windows DVD and try to install.

Alternatively, you can go to device manager, under view, check show hidden drivers. If you find one with a yellow marker, you can try to dowload from there.

1 more replies
Relevance 102.09%

hi, basically I have an Acer Aspire 5738Z notebook it was going a bit slow recentley so I decided to wip it clean and start again, before I even had the chance to think about rebooting it the wholoe thing shutdown and failed to boot. I thought this was my chance to wipe the whole think clean (using Alt+F10, acre Erecovery management) so I started doin it and after 17 long hours of the progress being stuck on 82% I decided it was time to turn of the computer and try it again, which I did and the whole thing was completed fine but when it restarted it came up with the message "windows failed to load a critical driver is missing or corrupt" and attempted to restart and try again only to be greeted with the same message again!

I have no windows 7 DVD but after a few hours of scratching my head I realized that my brother has the exact same laptop so I made a system repair disk from his laptop to use on mine... only to find that "startup repair cannot fix this computer automatically" and now it boots up but gets stuck on the windows logo screen and I've currently been there for almost 3 hours!

Can anyone help me please the laptops only a year old and I can't really afford the cost to get it fixed professionaly any help would be greatky appreciated... Thanks in advance guys!

Answer:windows failed to load critcal driver is missing or corrupt...help!

Bump!

6 more replies
Relevance 101.27%

I used to fix computers awhile back. Decided to help out an old customer, who can't find anyone to fix his computer during the Christmas period. He says its stuck in a automatic startup repair loop. And the last thing he did on the computer was click restart to install some windows updates. He said he tried a few fixes he found on youtube fixboot and fixmbr etc. But none of them worked. The Last thing he tried was fix boot problems using a macrium repair disc. And this is where I pickup the computer.

I using macrium myself to create images of the 2 HD's in the computer. And checked the health of the HD's with HD Sentinel. And health is good with them. I then tried startup repair options and tried to get into safe mode. System restore doesn't work either.

I attached a screenshot of the screen it boots into atm.

What would be my next step to take to tried and fix this computer?

More replies
Relevance 99.63%

Just replaced my hard drive after last one froze and died. On trying to install Windows Vista into the new one I keep getting the message "windows failed to load because the system registry file is missing or corrupt". It tells me to restart with my windows disk and repair but it won't let me. Keeps going to the same message. Going round in circles can anyone help?
 

Answer:windows failed to load because the system registry file is missing or corrupt

http://support.microsoft.com/kb/307545
 

3 more replies
Relevance 99.63%

hi
first off im a newb im not very good at this hence my problem

its an HP g6000 nothing modified.... other than a new screen due to breaking 3 years ago

ok so i decided to turn my old laptop on that for some reason (i cant remember) stopped working 2 years ago
ive decided to use it as a basic home system

it came on and went straight to windows boot manager giving me a 3 step solution to a problem

1. insert windows installation disc and restart computer.
2. choose language settings and the click next.
3 click repair your computer.

file: \windows\system32\config\system

status: 0xc0000225

info: windows failed to load because the system registry file is missing, or corrupt.
i dont know what this means but i dont have the install disc so i got an iso online and put it on to a 8gb flash (previously using rufus)

ive plugged it in and nothing happens just goes back to error and same 3 steps

please help

Answer:windows failed to load because the system registry file is missing, or corrupt

ive now made a boot disc which is also failing to work..

4 more replies
Relevance 99.22%

After getting my laptop (esystem) back from a charlatan that wanted to charge me 80 quid for getting rid of my bios password, i found the password and found that windows xp had been installed on it! the os was vista, i tried to reinstall vista but to no avail due to a message saying : windows failed to load because a critical system driver is missing or corrupt staus 0xc00000e9 file: windows\system32\drivers\acpi.sys
ican't get past this
any help would be appriciated, thanks.
 

Answer:Critical system driver is missing or corrupt staus 0xc00000e9 file: windows\system32\

hm ... I think that is referring to your HDD drivers. If you don't have a drivers disk already, then:

1.) Enter your BIOS
2.) Write down the make and model of your HDD
3.) Download the drivers for your HDD from it's manufacturer's website.
4.) Burn the driver to a disk (a jump drive might work, I can't remember)
5.) Your Windows installation menu should have a "load drivers" option some where.

EDIT: Nice catch, Archean! My tired brain didn't pick-up on that time-saving possibility.
 

3 more replies
Relevance 91.02%

Hi,

My windows failed to load b/c a critical system driver is missing or corrupt.

File: windows/system32/Drivers/gjofl.sys

Status: 0xc0000225

Prior to this, I had received some sort of virus that microsoft security essentials claimed to quarantine. I also ran malware bytes. After the scans, my computer accidentally became unplugged and died (the battery is shot). After trying to restart, I received the error msg.

I have tried booting up in safe mode and it doesn't work.

I also ran diagnostics -- the only msg I received was: "diagnostics not found on utility partition". I have no idea what that means.

I am being prompted to insert my installation disc to repair my comp, but windows was preinstalled so I don't have that option.

Please help!

Answer:Windows failed to start b/c critical driver is missin or corrupt

I dont know the answer, but I have a suspicion, that maybe, that driver has something to do with the virus. I googled the driver, nothing. I looked at my computers drivers (cmd prompt and type driverquery) and I do not have it.

5 more replies
Relevance 86.51%

Hello,

I've got an HP G6000 laptop running Vista 32 that has developed a fault. When I try and boot it up, it comes up with the error screen;

FILE: \windows\system32\drivers\ndis.sys

STATUS: 0xc000000f

Windows failed to load because a critical system driver is missing, or corrupt
I've done what it suggested and put in my Vista disk to try and repair it, but when it gets to the system reovery options, there is no Operating System listed. It says I should load drivers for my hard disks if I don't see the operating system, but I've not got a scooby as to what these are...

If I click on next, I get the various Recovery tool options, and have tried the Startup Repair option, which runs through the check and says it is repairing disk errors, but once it has completed this, it reboots and does exactly the same thing. I can't restore unfortunately as I've stupidly never backed it up at all, so there is nothing to restore to...

I'm guessing this is a problem with the hard drive? Unless anyone has any suggestions as to what else I might try?
Or if it is the hard drive, how I might get some stuff off it before I chuck it (My itunes basically... can cope without the rest...)

Many thanks in advance

Doc

Answer:Critical System Drive Missing or corrupt and cannot Repair

Are you using full version Vista DVD to boot?Run hard drive diagnostics: http://www.tacktech.com/display.cfm?ttid=287 (or http://www.bleepingcomputer.com/forums/topic28744.html)Make sure, you select tool, which is appropriate for the brand of your hard drive.Depending on the program, it'll create bootable floppy, or bootable CD.If downloaded file is of .iso type, use ImgBurn: http://www.imgburn.com/ to burn .iso file to a CD (select "Write image file to disc" option), and make the CD bootable.NOTE. If your hard drive is made by Toshiba, unfortunately, you're out of luck, because Toshiba doesn't provide any diagnostic tool.

1 more replies
Relevance 86.51%

I've been getting an error message every time I try to upgrade my Win7 Pro install to Win10. When I researched the issue I discovered that somehow my system partition was only 37MB instead of the usual 100MB that Windows creates when installing. This probably because I cloned the drive from a 1TB mechanical to my current 256GB SSD a year ago.

In any case, I attempted to resize the system partition by using Partition Wizard to first shrink the OS partition, then expand the System partition to fill the extra unallocated space. Everything went smoothly with the resize, but now I can't boot Windows - I just get the error in the title of this thread every time. I knew it probably wasn't a good idea to mess around with the beginning section of the OS partition, and I'm really kicking myself in the pants right now for not doing a disk backup first like I knew I should have.

So far I've only tried the bootrec commands and system repair, but neither have worked. Can anyone provide some additional methods I should try?

Answer:Windows Failed to Load - Winload.exe Corrupt or Missing

I finally got this issue resolved! Not sure what did it other than pure dumb luck. I kept at it with System Repair and the bootrec commands. It was strange that I kept getting different results each time. Sometimes System Repair would crash, sometimes it would say no problems can be resolved, ect. The bootrec commands were the strangest. At the very end when I would run "bootrec /scanos" it said 0 OS detected. For the hell of it I decided to do fixboot, fixmbr and rebuildbcd one more time and it seems to have worked!

My OS is back online and the System partition is a solid 300Mb. Time to do a disk image and then try the Win10 upgrade again!

EDIT: It seems I spoke a little too soon. I can boot in to my OS now and log in, but ONLY when my USB flash drive is connected. It seems that bootrec put the boot configuration on that drive instead of using my System partition on the SSD. When I run bcdedit within windows it says "device partition=I:"

Since I can't run the bootrec commands within Windows, how should I go about changing this? See the attached image for details.

1 more replies
Relevance 86.51%

I reinstalled Windows Vista 32 bit on my Gateway laptop using the OEM
install cd that came with it, but now when I boot up I get the following
window:

Windows Boot Manager

Windows failed to start. A recent hardware or software change might be the
cause. To fix this problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."

If you do not have this disc, contact your system administrator or
computer manufacturer for assistance.

Status: 0xc000000f
Info: Windows failed to load because the NLS data is missing, or corrupt.

Reading a similar post, I tried the 3 methods from WinRE (Startup
Repair, Bootrec /RebuildBcd, System Recovery) but they didn't work. I ran
SFC /scannow from command prompt C: and it reports : Windows Resource
Protection could not start the repair service. I ran Windows Memory
Diagnostics tool from WinRE and it reports no errors on my hard drive.

I consulted the Gateway support site & also tried to access the recovery
partition by pressing ALT-F10 upon reboot, but it didn't work either. I
tried getting in safe mode by pressing F8, but I didn't get the 'Repair
your computer' option which would have gotten me into Gateway's Recovery
Management window. I can't even get into Safe mode either, it loads a list of
files and stops on Loaded: \Windows\system32\drivers\crcdisk.sys and then
the Windows Boot Manager mes... Read more

Answer:Windows failed to load because the NLS data is missing, or corrupt.

I contacted Gateway support via online chat. They gave me a utility to scan/test the hard drive (GWSCAN). I ran it and it reported the hard drive has too many errors, and so Gateway advised me that I have to replace the hard drive.

Case closed.

1 more replies
Relevance 86.51%

Hey guys/gals,

I'm new to the forums and was hoping that the kind people here could help me out?
My problem being that when i attempt to boot the vista home premium sp1 system I'm working on i get the following error...status 0xc000000f "windows failed to load because the nls data is missing or corrupt"

Now I've been down all of the standard repair routes and no joy, although i have heard i can possibly take another vista install nls files and copy them to a usb drive for use in the problem machine. This seems to be above my skill set so any assistants you can offer would be warmly accepted.

Regards,
Tenuchi
 

Answer:Windows failed to load because the nls data is missing or corrupt

Do you have a bootable vista dvd?
if so
1. Put the Windows Vista or Windows 7 installation disc in the disc drive, and then start the computer.
2. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
4. Click Repair your computer.
5. Click the operating system that you want to repair, and then click Next.
6. In the System Recovery Options dialog box, click Command Prompt.
7. Type the command sfc /scannow
 

6 more replies
Relevance 86.1%

I upgraded my Toshiba laptop automatically from 8.1 to 10 when the software came out (months ago) - have had no issues with it.
Then I was using my laptop it flashed blue and turned off. It now comes up with with recovery - your pc/device needs to be repaired (see image) - I'm able to access the recovery settings - have tried refresh, system restore, automatic repair, nothing works and seems to get worse. I've searched for the last day forums and most people seem to have boot/bcd errors and so don't work for this problem. I have a lot of personal files/photos that haven't been backed up for about a month and want to save them! Please help. I've downloaded the Windows 10 iso to a usb - but have only get semi regular access to a Mac so unsure if it's bootable. Any help would be greatly appreciated - sorry if this is the wrong place for the thread.

Answer:Windows recovery, missing/corrupt critical driver error 0xc000000d

First option.
Try to get a live linux boot disk and boot from that to make a backup of the files you need.
(Always have this option open to recover files in cases like these.
You can try elementary OS or Ubuntu :
Download elementary OS
Get Ubuntu | Download | Ubuntu

Once you get them, Follow instruction available, Make that into a USB, boot from it, Live save your files to where you need and then you can proceed with windows error fixing or clean install with out worries.
Tool to make bootable linux usb :
UNetbootin - Homepage and Downloads

You can also use the live disks to replace the missing/ corrupt file inside your windows directory.

pdc.rar

3 more replies
Relevance 85.69%

Well, this one is a doozy. I have installed Vista x64 on a new hardrive after formatting it. Everything runs great until I Windows Update installs Service Pack 1.

I've been getting the same as a previous thread here, Boot Manager Failed to load - ntoskrnl.exe, but I'm able to use Auto Recovery with the Windows CD to get it working again.

Question: is the Service Pack 1 bugged from Microsoft.com? I have installed 3 times to get the same result.

Is there another mirror to get SP1?


Davis

More replies
Relevance 85.69%

Hay my computer froze last night while I was doing the disk cleaning, cause my computer was being really slow, and I turned my computer off cause it wouldn't let me do anything. well now when I start up my computer it goes into the windows boot manager. this is exactly what it says... from top to bottom.Windows failed to start. A recent hardware or software change might be the cause. to fix the problem:1. Insert your installation disc and restart your computer.2. choose your language settings, and then click "next."3. Click "repair your computer."If you do not have this Disc, contact your System Administrator or Computer Manufacturer for assistance.     File: ntoskrnl.exe     Status: 0xc0000098    Info: Windows failed to load because a required file is missing, or corrupt.I don't have the windows installation disc and I don't really have the money to get one so can you help me please.

Answer:Windows failed to load because a required file is missing, or corrupt.

What makes you think it's a malware problem?

2 more replies
Relevance 85.69%

I have recently setup a raid 0+1 array on a computer with 4 identical hard drives. I installed windows 7 and the installation without a hitch. However on the reboot a windows error message appears and says the following:

File: \Windows\system32\ntoskrnl.exe

Status: 0xc0000221

Info: Windows failed to load because the kernel is missing, or corrupt.

I have tried many things in an attempt to resolve this issue. I have tried reinstalling, using a different DVD drive and removing the RAID array to no avail. I have also disconnected the hard drive which is not associated with the RAID array also to no avail.

Any help would be much appreciated as i have been trying to solve this problem for several days now and i have come up with nothing.

thanks in advance

Twiggy145

Answer:0xc0000221 Windows failed to load because the kernel is missing or corrupt

Greetings,

In order to help troubleshoot I will need more information about the setup your using. Have you choose to use raid 0? Or raid 1? Have you configured the bios correctly? Do you have the raid drivers?

4 more replies
Relevance 80.77%

My vista 64 machine decided to no longer boot yesterday. It kept giving me a message that a critical system driver is missing, or corrupt. Said:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disk and restart your computer.
2. Choose your language setting, and then click "next."
3. Click "Repair your computer."

When I put my original Vista64 disc in the drive it sometimes loads and sometimes not. Even when it loads files it still locks with the same message, but with different drivers corrupt each time. It will not get to any screen where I can actually work with windows. I disconnected my hard drive thinking that might be the problem but no difference.

This computer is a couple of years old and had a lot of problems at first with vista 64 but has been working very well for over a year.

I don't even know where to start on getting this running again. I was going to just install a new hard drive but that obviously is not going to work since I cannot get my vista install disk to even boot well.

I have an EVGA nForce 790i Ultra SLI motherboard with 4 megs ram, qx9770 quad core processor, and MSI 280 GPU.

Any ideas? This was expensive to build and was supposed to last me a lot longer than a couple of years.
Thanks

Answer:critical system driver missing

Hello Norguaard,
Have you gone into the Bios to make the "first boot device" your DVD/CD ?.
Take a look here and follow the tutorial.

Repair Install For Vista

Hope this helps, good luck and post your results.

10 more replies
Relevance 79.13%

its a gateway laptop modle mx8711 with windows vista home premium 32-bit operating system ive tried (safe mode) (safe mode with networking) (safe mode with command prompt) ( last known good configuration-advanced) and (start windows normally) with and without the operating system disc and or the system recovery disc, ive tried the boot menu f-10 and the bios settings f-2 with or without the disc's and ive done everything i could think of in the phoenix setup utility and no matter what i change it allways goes back to (windows failed to load) help please

Answer:windows failed to start because system registry file is missing or corrupt

Go to this site http://www.aitechsolutions.net/winxpnoboot.htmland read Restoring the Windows XP registry to a bootable configuration General instructions and conventions for step by step instructions.

1 more replies
Relevance 78.72%

I have a problem with my ThinkCentre E72 (Windows 8). Suddenly, it shuts down with "shut-down" screen. Later, in my Event Viewer, I found the following System Warning:"The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001" where the source of problem is Kernel-PnP. Only thing that is plugged in my computer is mouse, keyboard and monitor. Many thanks,Matija 

Answer:E72 - The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001

In case anyone else is affected by this, please have a look at my post in Kernel-pnp (PLEASE HELP). Best regards // ThinkErEr





ThinkCentre M900 Tiny, i7, 16GB, Samsung 950 PRO M.2 NVMe 512GB

1 more replies
Relevance 77.49%

Status: 0xc0000001
Info: Windows failed to load because the system registry fie is missing or corrupt

How do I fix this without using installation disks(or any other disks)??



Thanks!

Answer:Windows failed to load because the system registry fie is missing..

Microsoft's website have a Collection of repair disks, that you can download.

Download Repair Disk for KB2823324 and KB2782476 (KB2840165) from Official Microsoft Download Center

Are you able to boot into Safe Mode?

9 more replies
Relevance 77.08%

Resently I  was given an old ''Dell Dimension 2400'' purchased back in 2003, without the origonal xp disk to reformat or restore. I didn't care because I have a ' w7 32 bit ' I was planning on putting on it, if it ran well. I cleaned it up, ran all the updates and put more ram in it.. it ran great...for two weeks. It has both a cd and dvd drives and has a pentium 4 processor.
 
Now when I boot up it says - windows could not start because the following file is missing or corrupt: system 32\drivers\pci.sys - you can attempt to repair this file by starting windows using the original setup cd-rom. select ' r ' at the first screen to start repair.
 
Googling I found that this computer has xp partitioned on the hard drive and it came  two disks called "recovery" and  "resource" to be used when you need to repair or want to restore instead of coming with a wxp disk so one could reformat.
 
Does anyone know how I can fix the missing file issue?
 
So far what I have tried is, I bought a  '' automatic drivers recovery for dell dimension 2400'' disk. It did nothing.

Answer:Missing or corrupt system driver pci.sys

Can you boot into Safe Mode?
 
If you can I would suggest that you run chkdsk /r, this will repair errors, locate bad sectors, and recover readable information.
 
Click on Start, click on Run and type cmd in the box and press Enter.  
 
You will see an image similar to the one below.
 

 
Type in or copy and paste chkdsk /r
 
You will get the following message:
 
Chkdsk cannot run because the volume is in use by another process.  Would you like to shcedule this volume to be checked the next time the system restarts?  (Y/N)
 
Press the Y key, then press Enter
 
Restart your computer to run the scan.  This has five sections and will take some time.  Please don't try to use your computer while this scan is running.
 
 
There is a file titled i386 which contains a copy of the pci.sys file that you can overwrite the corrupted one with.  
 
You will need to go to Start, then click on Run.  Then copy and paste the appropriate command below.
 
 
If this computer does not have SP3  copy and paste this in the Run box, press Enter    copy c:\windows\system32\dllcache\pci.sys c:\windows\system32\drivers
 
When you are asked if you want to overwrite the existing file respond in the affirmative, you should get the message 1 file(s) was copied.
 
 
If this computer does have SP3 copy and paste this in the Run box, press Enter   copy c:\windows\Serv... Read more

4 more replies
Relevance 76.67%

"OMCI system driver failed to load on start up." Source: Service Control Manager.

I have had this error message appear repeatedly over the past 2 months or so.

More recently the following also fail to load:
PCIIde
ViaIde

Windows (XP SP2) also often fails to start, sometime failing after the Windows logo screen has run, sometimes it doesn't get that far. Hitting the power and re-trying works...

Any advice appreciated.
 

Answer:System driver OMCI failed to load...

Kservice
and
PC tools Anti-Virus Engine (now uninstalled)

Also have frequently hung on starting.

Another recent error:
"The Messenger Sharing Folders USN Journal Reader service service failed to start:
...The service did not respond to the start or control request in a timely fashion. "

Another recent error
"An error was detected on device \Device\Harddisk0\D during a paging operation."

and

"The device, \Device\Scsi\JRAID1, did not respond within the timeout period."
 

3 more replies
Relevance 76.26%

My new Dell keeps doing a crash dump.  IT came with Vista and has been upgraded to Vista Ultimate 64.  It keeps crashing.  once when it restarted the  page said Failed to Load;  a critical system driver is missing or corrupt    file/windows/system32/drivers/volmgrx.sys.Help.I can't figure out what is going on and I have searched all over the web!

Answer:system driver is missing or corrupt .... volmgrx.sys

Is your computer operable?Do you still have Vista DVD?

6 more replies
Relevance 76.26%

My CD Rom is not operating. I receive a code 39 that the driver is either corrupt or missing. How do I fix this issue? My computer is out of warranty. My laptop is the HP g72t wj744av. I do not know when this occured. I just did started it up yesterday and it ran some updates from windows for the operating system, for office 2007 and a few others. I uninstalled the dvd and reinstalled it with the same problem still there. Is there a fix for this other then going in deep and redoing the computer from scratch? Thank you,Swobby











Solved!
View Solution.

Answer:code 39 dvd system driver corrupt or missing

Hi, First, try the automated fixit from Microsoft on the link below. Windows 7 Vista Check if the drive is now working. If it's still not working, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'.  In to the prompt type the following command and hit enter. sfc /scannow                 ( note that there is a space between sfc and the / ) Let the process complete, then type exit and hit enter.  Restart the notebook. When windows has fully reloaded, click the Start Menu, open the Control Panel and click on Device Manager.  Next click to open DVD/CD-ROM Drives.  Right click the drive and select uninstall.  Do not delete drivers if asked.  When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ).  Let windows reinstall the drive and see if it now works.?Regards, DP-K

5 more replies
Relevance 75.85%

Hi all.

My pc has been hanging randomly and I have to use the power button to shut down/restart.

I've checked in events and there is this error which seems to be causing the problem as the time matches with the hang time.

I posted another topic with another bsod issue in the bsod section, and I was told to run some tests.

A day or so ago, I tried and changed Driver Verifier settings as were instructed in one of the threads here which also mentions that it is an iffy thing to do.

Anyway, I lost windows and could not start again, luckily I had a backup made, and after formatting my HD, loaded it on to it. This error seems to be a driver issue (Screenshot).

Should I go down the Driver Verifier route again ? To be honest I don't want to. If I lose windows again it would be very frustrating.

I've run the following tests so far here

I have no driver issues showing up in Device Manager, so that looks ok.

Please advise. Thank you.

Answer:The following system start driver(s) failed to load: mbmiodrvr

I looked around and found a reference to Mother Board Monitor which at least sounds like it might be the culprit.

Do you have that application installed, or some other temperature / fan speed monitoring sw?

Alex Van Kaam, the author of Mother Board Monitor, stopped development in 2004 citing his frustration getting technical information from mfgrs.

Anyway, if you have Mother Board Monitor installed, remove it. If you have other monitoring sw, post what you have and someone might know more about that sw (MBM source used?)

If you haven't tried a Clean Boot, here's a tutorial you can follow:
Troubleshoot Application Conflicts by Performing a Clean Startup

Bill

5 more replies
Relevance 74.21%

the following boot-start or system driver(s) failed to load: SRTSP SRTSPX
Anyone were seen that problem?
Laptop is a compaq and running windows Vistahome Premium
cheers

Answer:the following boot-start or system driver(s) failed to load: SRTSP SRTSPX

Ohh sorry.. got that from the event log..

3 more replies
Relevance 72.57%

My computer will not boot... I keep getting the "windows failed to start because the system registry file is missing or corrupt"...I've tried going in safemode, last known configuration, etc. I also just tried the Vista recovery disc (32-bit) and it still won't work... There is a lot of stuff on my laptop I need, does anyone know how I can fix this without having to lose all of my info stored on my computer??

Answer:"Windows failed to start because the system registry file is missing or corrupt"

Boot to the Vista CD and use the repair option(s)

11 more replies
Relevance 72.16%

It give me message - Windows failed to load because the system registry file is missing or corrupt. Status : 0xc00000e9It was just randomly Missing or corrupt. I belive this is hard disk error but I keep finding solution for month but I don't find any that worked.I don't know my computer details but what I know isComputer name - AsusChipset - AMD PhenomIf you guys can help me I will appreciate it . Hope god bless you ..

More replies
Relevance 72.16%

It give me message - Windows failed to load because the system registry file is missing or corrupt. Status : 0xc00000e9It was just randomly Missing or corrupt. I belive this is hard disk error but I keep finding solution for month but I don't find any that worked.I don't know my computer details but what I know isComputer name - AsusChipset - AMD PhenomIf you guys can help me I will appreciate it . Hope god bless you ..

More replies
Relevance 68.06%

Hi all,
I have a problem with Vista Business.Naimly, every time I start the computer and look up into the computer menadgement/event viewer/administrative events it has an error msg:
The following boot-start or system-start driver(s) failed to load: i8042prt



-
System










-
Provider







[ Name]
Service Control Manager






[ Guid]
{555908D1-A6D7-4695-8E1E-26931D2012F4}






[ EventSourceName]
Service Control Manager









-
EventID
7026







[ Qualifiers]
49152










Version
0










Level
2










Task
0










Opcode
0










Keywords
0x80000000000000









-
TimeCreated







[ SystemTime]
2007-08-27T15:56:02.000Z










EventRecordID
26753










Correlation









-
Execution







[ ProcessID]
0






[ ThreadID]
0





















-
EventData






param1
i8042prt
I think this is regarding my video card (Gygabyte Nvidia 8600GTS) drivers?!But the card works pretty normally and the drivers are up to date.
Anyway there are also a lot of other error & warninig msgs regarding the volsnap and security update installation files.Maybe this due to the situation that I have installed both Vista and XP and there is a common problem with Vista working with XP/other and that is NO RESTORE POINTS... Read more

Answer:The following boot-start or system-start driver(s) failed to load: i8042prt

Problem Solution The following boot-start or system-start driver(s) failed to load: i8042prt 1.Go to Start > Run and put regedit.exe  and click  Ok 2.Navigator to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\i8042prt\Parameters in Registry Editor 3.Add a new REG_DWORD "Headless " and set the value to 1 4.Reboot the server. Regards,

18 more replies
Relevance 68.06%

Sorry if this has already been answered/wrong place. I looked at Google but thought I double check here (since the solutions via Google seem to be refering to a different OS to mine)

First of: Windows Vista, SP2, 64 bit.

Now sometimes (and not now since I am writing this) my Keyboard/Mouse just stops working. It freezes completely and I am unable to use it and am hence required to restart the computer. This happens at random occasions but it usually involves opening some program or what not (I noticed a prominent pattern that the mouse/keyboard freezes whenever I go to speedtest.com measure my speed and then once the download speed bar is finished and upload is about to begin my computer freezes).

I had a look at my event viewer and noticed this:

The following boot-start or system-start driver(s) failed to load:
i8042prt

Now I am not sure whether this appears at the start and then once I run a program or do something (like go on speedtest.com) the commuter then freezes (i.e. my mouse/keyboard is non-responsive) or the error message comes up after my computer freezes but any help in fixing this mouse/keyboard freezing would be very grateful.

The solution to fixing this problem I founds was to go to Registry editor and change the Start D word from 1 to 4 (but I noticed some saying to delete it completely and yet other sources to change it from 1 to 0 and yet even others to change something that I don't even have under that folder). If I was to tamper with the reg informa... Read more

Answer:The following boot-start or system-start driver(s) failed to load: i8042prt

Originally Posted by Petze


The solution to fixing this problem I founds was to go to Registry editor and change the Start D word from 1 to 4 (but I noticed some saying to delete it completely and yet other sources to change it from 1 to 0 and yet even others to change something that I don't even have under that folder). If I was to tamper with the reg information, is it possible that I wont ever get access to my keyboard/mouse? My worry is that I might change some value so that I will have no way of getting to the computer with the keyboard/mouse (I am not good with bios) and would not be able to get help on the internet since I can't connect!



It is bad idea

DWORD Start may have following values

0 -boot ,1 -system ,2- auto ,3 -demand, 4 -disabled. Surly if you'll set to 4 you lose access to keyboard and mouse.Don't modify anything.Find folder C:\Windows\Minidump pack it and attache to post.If Minidump folder is empty use verifier tool to diagnose wrong drivers read here:http://www.vistax64.com/973966-post8.html

33 more replies
Relevance 68.06%

Each time I boot my computer, I receive the follow message in the Event Viewer System Log File:

The following boot-start or system-start driver(s) failed to load:
KmxAMRT

Here is the information that I see when I sent it to the Microsoft Support and Help Center

Product:Windows Operating SystemID:7026Source:Service Control ManagerVersion:5.2Symbolic Name:EVENT_BOOT_SYSTEM_DRIVERS_FAILEDMessage:The following boot-start or system-start driver(s) failed to load: %1

What I believe is happening is that all though I uninsulated CA's Anti virus package and installed Microsoft's Security Essentials, not all the CA software was removed.

Help in getting rid of this problem would be greatly appreciated.

Best regards,

Larry

Answer:[SOLVED] The following boot-start or system-start driver(s) failed to load:

Hi

See this document:
Uninstall failed

Select the correct CA product you had, download the Removal script and run.
Hopefully this will remove the CA Suite from your PC.

2 more replies
Relevance 68.06%

I have system error: The following boot-start or system-start driver(s) failed to load: tvtumon My computer has all pathes and latest rivers installed. Why this driver die?

More replies
Relevance 68.06%

Guys, I'm running Windows XP and recently when I turn on my PC it makes a single beeb and then seems to run OK.

Tonight, I was running Firefox and the system seemed to slow, before becoming completely unresponsive. I had Task Manager open at the time, however when I tried to shut Firefox down the PC started bleeping like mad and I was forced to do a hard shut down.

I waited about 1 minute and then rebooted and immedietly went into the Error log and found the following entry:

"The following boot-start or system-start driver(s) failed to load: StarOpen"

I tried Googling a fix with no luck and I can't find StarOpen in the Services, Apps or Program files. Nor could I find it listed in the Device Manager or the Boot-start list in msconfig.

Can anyone tell me how to fix this?
 

More replies
Relevance 68.06%

I checked through the Event log in Administrator tools.
I got the following error: The following boot-start or system-start driver(s) failed to load: BANTExt

What is it?

I googled BANTExt and found out it's BelArc Advisor. Is it true?

How do I stop this error?

Answer:The following boot-start or system-start driver(s) failed to load: BANTExt

Yes, BANText.sys is the Belarc Advisor system driver file.It is started automatically from a Run, RunOnce, RunServices, or RunServicesOnce entry in the registry everytime Windows starts.To prevent the error you would need to find and remove that entry in the registry.

11 more replies
Relevance 68.06%

Ok I will copy and paste the message:

The following boot-start or system-start driver(s) failed to load:
aswSP
spldr
Wanarpv6

I found it in vista event viewer. I am currently running vista in safe mode and dont really want to restart the pc. This is my first post on these forums and they look great. SO please help!

MY PC Specs:
2 (1x1) gb RAM
1.6Ghz CEL E1200 Dual Core CPU
Vista Ultimate
CD Driver
256MB GFX Card
Nothing else you really need to know

Answer:VIsta The following boot-start or system-start driver(s) failed to load:

Could be spyware.

I would run a Trendmicro free scan.

3 more replies
Relevance 68.06%

Everytime I start Windows, I see the following error in Event Viewer:
 
The following boot-start or system-start driver(s) failed to load: 
VBoxNetAdp

Answer:The following boot-start or system-start driver(s) failed to load: VBoxNetAdp

Do you have Virtual Box or Avast antivirus installed?

1 more replies
Relevance 68.06%

The following boot-start or system-start driver(s) failed to load: i8042prt Any ideas?  Thanks in advance.  - Larry  -----------------------------------------------------------Lenovo 3000 H210 Desktop, Windows Vista Home Premium 64-bit, Intel E5200 Duo Core, 4GB RAM, 320 GB Hard Drive

More replies
Relevance 68.06%

Hello,

Has anyone ran into the Event ID in the Title?
(Event ID: 7026, Message: The Following boot-start or System-start Driver(s) failed to load: TMEBC)

The user is getting CHKDSK every time they boot up the machine and it fails within seconds of it starting.
I removed the Scheduled task under the AutoChk area in the Task Scheduler.

Anyone have anything on this driver or able to assist?

Zach

More replies
Relevance 68.06%

Of late when I am powering on my PC, the power LED on the cabinet blinks but the HDD LED doesn't. The monitor displays, NO SIGNAL.
Then when I restart the PC and when it finally boots, I go to the Event Viewer and find this entry

The following boot-start or system-start driver(s) failed to load: atc

My PC Config:
ASUS M5A78L-M/USB3 MoBo
AMD FX 6100 CPU
Corsair Vengeance 8 Gigs RAM
Crucial MX 100 256 GB SSD
500+160 Seagate HDDs
ATI Radeon HD5450 GPU

Kindly advise what does the above error mean and how do I resolve it

Thanks

More replies
Relevance 68.06%

I am trying to resolve two problems one is on in my event viewer only; and first started on the 26/11/09 it is as follows:
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7026
Date: 06/12/2009
Time: 09:04:34
User: N/A
Computer: USER-B3A7BA2F25
Description:
The following boot-start or system-start driver(s) failed to load:
ViaIde

At that time I had installed some Windows updates, problems often seem to start after Windows updates!.

The second problem also appears in the even viewer, but I am aware it has happened during start up. The system can not find or load the user profile,
This happens at random and can be several days or weeks apart
event viewer details are:
Event Type: Error
Event Source: Userenv
Event Category: None
Event ID: 1511
Date: 03/12/2009
Time: 20:19:22
User: USER-B3A7BA2F25\Tony
Computer: USER-B3A7BA2F25
Description:
Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.

With the first problem ViaIde failed to load; I have followed Microsoft link, Googled it, and not really seen much information that will help. I have run the scf/scannow without success. Any ideas and help would be appreciated

The second problem of profile loading, I had associated with the Kaspersky internet security suite. They asked me to remove some conflicting software and the problem did stop, but returned a few... Read more

Answer:boot-start or system-start driver(s) failed to load:

Hi, It's all a little disappointing, it would seem no one here has an answer either.

The user profile problem does for the time being seems to have stopped, since the last Windows update, but I am not holding my breath as this happend before and then it retunes again.

I am left with just the "The following boot-start or system-start driver(s) failed to load: ViaIde, problem to resolve........if anyone does have a clue ?

regards Tmax
 

8 more replies
Relevance 68.06%

hi,

I am currently making a device specific module for microsoft MPIO. I have successfully installed the mpio and my own DSM. However, during start-up, an error message comes out saying: "At least one service or driver failed during system startup. Use Event Viewer to examine the event log for details."

When I checked the event log, it says:

The following boot-start or system-start driver failed to load: TrailNavi

TrailNavi is the name of the device specific module that i am making. I am currently using a 32bit server with Windows 2003 OS.

I am trying to test my DSM, but could not do so because the driver can't be loaded..

Any help would be great..
 

Answer:The following boot-start or system-start driver(s) failed to load

bump
 

1 more replies
Relevance 67.65%

I recently had to install a new battery for my computer. After doing so I started having this problem and receiving the following Error from the "Service Control Manager" Event ID:7026   The following Boot-Start or System-Start driver(s)
failed to load: ppfd_vt_1_10_0_24    Param 1. The issues I am having are; Unable to completely "SHUT DOWN" unless I press the power button, this is after I have already selected the "shut down" option in the Start menu. Never
had to press the power button to power off my computer. Also, at "START-UP", I get as far as a black screen with a white flashing cursor in upper left-hand corner. At this point I am stuck, nothing takes me out of this state unless I press the "POWER"
button to shut-down. In order to start-up & Boot, I disconnect AC Adapter, remove battery, wait about 20 seconds, re-install battery, power adapter, and push power button. Now my computer is all good. Can anyone help me with this, I've researched for 2
weeks and am no where. Thanks for any help. My computer is quite old, 2010 Sept., but I'm hoping that I don't have to purchase a new one...(I'm a lil cheap) lol

More replies
Relevance 66.01%

I have an Macbook Pro with an Intel processor, which I have partitioned as a dual boot and have Windows 7 Ultimate X64 installed. This setup has ran fine until last week. I installed an old Guitar DVD course, and the default video player was Windows Media Player. For some reason the videos would only play sound but no video. The videos would play fine if I went to the folders and used a different media player, but within the lessons software it by default used Windows Media player. I tried updating all the codecs to play avi files but with no luck. I read where it was a known issue with WMP 12, and rolling back to WMP11 usually solved the issue. I found an older version of WMP 11, but I think it was infected with malware, and I was caught in an infinite boot loop where Windows wouldfind a problem, try to repair it, and couldn't, and reboot only to keep doing that over and over. I ran /fixmbr and /fixboot and managed to get out of the boot loop, but now I keep getting an error "Windows is unable to start due to a missing or corrupt file Windows\SysWOW64\Drivers\SZKG64.sys From researching some it seems to be a driver from an antivirus\spyware program I have installed called StopZilla. I've looked everywhere for some way to get past this but can't seem to find a solution. Also I have ran three different rescue cd's and nothing has shown up. Any advise? Thanks.

Answer:Failed startup due to SZKG64.sys missing or corrupt

  
Quote: Originally Posted by rsadler


but now I keep getting an error "Windows is unable to start due to a missing or corrupt file Windows\SysWOW64\Drivers\SZKG64.sys


do you get this message at start up? ..after the welcome screen is loaded?

6 more replies
Relevance 65.19%

This happened after I re-installed drivers for a marvell sata 6 SATA slot.

I have win7x64 gigabyte x58a-ud3r v1. SSD is samsung 840 pro.

File: mvs91xx.sys
Status: 0xc0000098

this is what it shows before loading I have options for safe mod etcc... but whatever I click it always comes back to that mvs91xx.sys error
 

More replies
Relevance 65.19%

This happened after I re-installed drivers for a marvell add in sata 6 card. I booted into another OS and replaced the file in the drivers folder but it did the same. Is there any way I can remedy this situation without doing a repair install?

win7x64 gigabyte x58a-ud5 v1. SSD is samsung evo 840.

Answer:windows failed to start mvs91xx.sys missing or corrupt.

Load a previous system restore check point?

4 more replies
Relevance 64.78%

I saw this while debugging my Y50-70 (windows 8.1 x64) which had shut down issues Need expert advise on which lenovo driver is this "lenovo HID"

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000

Got the same problem...Lenovo Z50-70Win 8.1 x64 The device sometimes doesnt correctly shut down.Display = black and LEDs are on. Need to turn it off "hardcore" via pushing the power button ca. 10 seconds. What the hel is going on? Windows says: The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000I installed all Lenovo drivers.

3 more replies
Relevance 64.78%

Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)




Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.


Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

0 more replies
Relevance 64.78%

Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)




Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.


Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

2 more replies
Relevance 64.78%

I am seeing several of these Warnings in the Event Viewer, Windows System logs. These are Event ID 219, Source Kernel-PnP.

That said, I am not experiencing any crashes, freezes, BSODs, and everything on my PC seems to be functional. So perhaps I can safely ignore these warnings, but I prefer to get to the bottom of something in case it will lead to problems in the future.

I have done some online research on this event, and none of the suggested fixes seem applicable to me. I have been vigilant in keeping all drivers on my machine up to date. I've checked, and there don't seem to be any newer drivers available for any of my hardware. I also have the Windows Driver Foundation - User-mode Driver Framework service set to "automatic" startup.

The details of this event are below.

Any suggested action to remedy my problem? Thanks!

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

- <System>

<Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />
<EventID>219</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>212</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2017-01-01T19:23:45.837466800Z" />
<EventRecordID>51641</EventRecordID>
<Cor... Read more

Answer:The driver \Driver\WudfRd failed to load for the device ROOT\WPD\0000?

Go to Start/Search and type devmgmt.msc, right click the devmgmt results and Run As Administrator. In the Elevated Device Manager, are there any devices with yellow flags? If so, these devices need drivers installed. Usually your video card driver.
https://social.technet.microsoft.com...ernel-pnp.aspx

3 more replies
Relevance 64.78%

I was downloading SP2 on my sister's pc and the computer went to the black screen where it gives the option of restarting normally, in safe mode, etc. When I try any option, I get the message in the subject line. It says I must reinstall in the file in order to start windows Any advice?

--The pc has XP home
 

Answer:win32/hap.dll corrupt or missing - windows will not load

9 more replies
Relevance 64.78%

HELP>>>>>>> I in stalled a driver for a lexmark printer from lexmark said to restart i closed everything out and restarted computer now i get "Windows could not start becasue the following file is missing or corrupt:
<Windows root>\system32\hal.dll. Please re-install a copy of the above file.
Now i've tried to restart to the last working configuration, in safe mode, safe mode with networking and nothing.
What do i do. I have files on spread sheet that i dont want to loose (tax time)

Answer:Will not load Window Root missing or corrupt

http://pcsupport.about.com/od/findbyerrormessage/a/missinghaldll.htm

2 more replies
Relevance 64.78%

Hi everybody,

i've searched for this problem in this forum, but did not found a solution, because when i'm going to this Repair Console in Win XP, booting from cd, pressing "r" and so on always comes that win setup could not be loaded because cdrom.sys or any other thing could not be loaded from cd.

CD is clean and do not have any errors, cant even make new installation. Tested it on other pc there it goes, and tested other win XP Pro version on this PC it stopped. Booting with Kanotix a modified KNOPPIX (bootable Linux live cd) boot without problems, so cd device has no errors, i think.

My question now is: What can i do? Can i do anything? or is formating and reinstall (!!if going!!) because setup cant be loaded is the only solution??

Please help me if you can and sorry for my bad english...

so long...

PC:
2.4 GHZ Intel P4
Win Xp Pro without any Servicepacks but with all updates
liteon CD drive
2 HDD Samsung with 200 GB
512 Infineon DDR Rams
Hauppauge TV Card pci
Nvidio Geforce 3 pci
lan card pci
isdn fritz card isdn PCi

Hope this is enough Data plz help
 

Answer:Corrupt or missing isapnp.sys//Console do not load

Do not anybody know an answer? Or is the Problem uninsteresting? Only 5 views??
 

1 more replies
Relevance 64.37%

This has been a problem for over a year now. 140+ identical PCs running identical images, with identical keyboards. Some have the problem, some do not, and it's incredibly unpredictable.

PCs are HP Compaq Elite 8300 SFF running Windows 7 x64 Professional.

People will be working at their PC, hear the USB disconnect sound, and their keyboard will become unusable for 30+ seconds.

An Event with ID 219 is created in the Event Log:

Log Name: System
Source: Microsoft-Windows-Kernel-PnP
Date: 2014-03-31T16:15:30.226
Event ID: 219
Task: N/A
Level: Warning
Opcode: Info
Keyword: N/A
User: xxxxx
User Name: NT AUTHORITY\SYSTEM
Computer: xxxxx
Description:
The driver \Driver\kbdhid failed to load for the device HID\VID_03F0&PID_0324\7&3c64d09&0&0000.

For those affected, the frequency of the error runs anywhere from 10 times a day to once every few weeks.

Re-imaging the PC has no effect but that same image running on another PC with the same hardware can run without ever experiencing the problem. The system I use has not experienced the problem once in over a year.

I have rebuilt the image from scratch and pushed it out to a group of people experiencing the error. It seemed to resolve it for a few months and then the errors inexplicably came back. I've tried replacing the keyboards with completely different models. Again, it seemed to resolve it for a while and then it came back.

Moving the keyboard to different physical ports has no ef... Read more

Answer:Out of ideas - The driver \Driver\kbdhid failed to load for the device

I know this may sound simple; but have you tried completely uninstalling the keyboard from device manager; then let windows reinstall it? That may fix the issue. If not then post back.

4 more replies
Relevance 64.37%

My PC started BSOD-ing a few days ago and now does it every few hours.

It starts with this error:

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_Multi&Prod_Flash_Reader&Rev_1.00#058F63666471&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}.

Then moves on to:

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_Multi&Prod_Flash_Reader&Rev_1.00#058F63666471&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}.

Then:
Installing printer driver Microsoft XPS Document Writer failed, error code 0x0, HRESULT 0x80070705. See the event user data for context information.

Then:

The print spooler failed to regenerate the printer driver information for driver Microsoft XPS Document Writer for environment Windows x64. Win32 system error code 1797 (0x705). This can occur after an operating system upgrade or because of data loss on the hard drive.

Finally:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xffffffffc0000005, 0xfffff80c5d0d15b0, 0x0000000000000000, 0xffffffffffffffff). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: d35c98fc-b1e6-4003-bed9-f7cdbca575e2.

This started happening a few days ago, right after a new update from windows:

Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3201845)

Answer:BSOD - The driver \Driver\WudfRd failed to load for the device SWD\WPD

Please check MSI for BIOS updates and update every driver that is possible from MSI.

3 more replies
Relevance 64.37%

Hi,

Since the 11/18/2012 event viewer (Event ID 219, Task Category 212) has been posting a warning:

The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN (followed by name of USB device)

It only occurs on start up if I have a USB memory device plugged into a USB port. The USB memory device functions perfectly and the error never occurs when I plug in and out a memory device after boot up.

The error only occurs for memory devices like memory sticks, external USB hard drive does not cause this error.

Checking back to around the 11/18/2012 I see nothing that I have changed/installed that might indicate something that has caused this. No other Windows 7 failures or issues.

Booting a second hard drive with windows 7 on the same system (I have this second installation for testing faults etc), the issue does NOT occur.

From checking forums and searching I have found a few others with this issue and a few articles on its cause

WUDFRd failed to load for the device

Event ID 219 is logged after you install Windows 7 or Windows Server 2008 R2

I was just curious as to why it would suddenly start occurring after a particular date when as far as I can tell I have not made any changes to anything around this date.

Also I wondered if there was a fix to stop this, other than removing a memory stick before boot up!

Any thoughts?

Answer:The driver \Driver\WUDFRd failed to load for the device... error

I just started getting this exact same error message logged in Event Viewer when I plug a USB stick into a USB port. It happens with two different sticks from two different manufactures, but it does not happen every time I plug them in. It seems that it may mostly happen the first time I plug a stick in after I have booted up my PC.

Have you been able to find a solution to get these error codes to stop logging?

9 more replies
Relevance 64.37%

Hi
i have a couple of weeks ago installed windows and i just got bsod crash and this was the only error in the event viewer
The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_GENERIC&PROD_USB_CF_READER&REV_1. 01#18E3312D81B&1#.

after looking at the minidump i thought it was due to a usb vidio/audio capture device so i tried updating the drivers and windows update couldnt find any and i cant find any online.

could some one help me and check my dump file to see if im right.
thanks

Answer:The driver \Driver\WUDFRd failed to load for the device error

Hi bftdsh.

A stray crash dump is not enough. Click on the button below ....



It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums

9 more replies
Relevance 63.96%

Hello,
I've broken my desktop pc and I've tried to sort it but my skills are pretty minimal so it would be great if anyone could give me a bit of advice or point me in the right direction.

Here's a description of what happened:
After using my pc I went to turn it off as normal but I switched off the socket too soon, as the pc hadn't finished shutting down.
When I went to restart it, it seemed to be ok but before it booted up properly i got this message.

Windows could not start because the following file is missing or corrupt
\WINDOWS\SYSTEM32\CONFIG\SYSTEM
You can attempt to repair this file by starting windows setup using the original setup CD-ROM.
select 'r' at the first screen to start repair.

Unfortunately I dont have the original setup CD-ROM, but I do have a copy of windows xp home.
I booted the pc from this disk and I pressed 'r' which took me to the recovery console, I'm well and truly stuck here, I dont know how to operate the recovery console.
Does anyone know how I can repair my pc from here or is there anything else I can do?
Many thanks in advance,
Martyn
 

Answer:Windows XP Missing or corrupt file, wont load

I've had a look at some similar posts on here and I've noticed that i seem to have a common problem, I tried following these instructions http://support.microsoft.com/?kbid=307545 but after completing the first line I got informed that i could not copy this file, what should i do???
I cannot take the computer back to the place i bought it as it has gone bust, can I fix this myself?
I also own a laptop, is it possible to connect the 2 pc's? I have alot of documents on the desktop that I'd like to recover.
Cheers,
Martyn
 

3 more replies
Relevance 63.96%

Trying to help out the grandparents, who just returned home from a trip. They tried setting up their computer and it is giving them the message about the file missing or corrupt (something similiar to this- I may have the order wrong: c:\windows\config\system 32)
We printed off the directions from Microsoft for the recovery console. The first two files to copy regarding system and software indicate they "cannot be copied" however, the last three were able to be copied. I stopped my efforts there since the first two didn't work.
I noticed a prior post indicated I could ignore the first two copy commands, is that correct? Or can I try a repair in the reinstall option? What should I try first? Unhooking the printer/speakers? Hardware issue? If that fails, try F8 and use last known configuration? If that works, do I do a system restore? When would I use "safe mode?"

We are at different houses w/o wireless so I am trying to get all info I can before heading back over there. Thank you!
 

Answer:Windows XP home won't load corrupt/missing file

8 more replies
Relevance 63.96%

Hi
I am trying to fix my grandaughters acer asprire one d 255 it will not boot up .
Says file:windows\system32\winload.exe status oxoooooof
info: the selected entry could not be loaded because the application is corrupt when i try to restore to factory settngs only gets to 16 % and gives a error code sysyem restore failed i/o device error f10 brings me to edit boot option so itry to type bootrec/fixboot. if i could type the right thing on the edit boot option might work but not sure what to type . Since there is no disc drive to insert disc how do i do a system restore with no disc drive thank you for any help on this mary

Answer:windows failed to start application missing or corrupt aspire one d255

"restore to factory settngs only gets to 16 %" So it failed after 16%. Not everything has finished so windows wouldn't start whatsover!

failed i/o device error ... hmm looks like harddrive is faulty. Still waranty?
Since you did bootrec/fixboot you seemto be able to enter "command prompt".

Code:
dir c:
dir d:
dir e:
What commands give a listing?


Code:
chkdsk/f/r c:
chkdsk/f/r d:
chkdsk/f/r e:
any errors? btw it takes hours to complete!

2 more replies
Relevance 63.96%

Hi Guys

i got an error while activation of windows 7 error codes 0x8007007b and also key management service (kms) binding is missing or corrupted.

steps i have done :

1. Run windows tweaking tool
2. SFC scan - no corrupted files
3. checked for virus
other ways of activation is disabled i dont know why

i have a valid key for W7

can anyone tell me what to be done

no errors in eventvwr with codes 12288,12289,12290 responsible for kms service

can anyone tell me how to activate windows now

Answer:Windows activation failed -error code 0x8007007b & kms missing/corrupt

Please follow this tutorial and post an MGADiag report - then we can see what the problem is.

http://www.sevenforums.com/windows-updates-activation/234159-windows-genuine-activation-issue-posting-instructions.html

Ignore errors produced when clicking on the Copy button - they simply mean that the tool could not create the backup files for some reason. The data is still copied to the clipboard for pasting to your response.

Please also state the Version and Edition of Windows quoted on your COA sticker (if you have one) on the case of your machine (or inside the battery compartment), but do NOT quote the Key on the sticker!
http://www.microsoft.com/en-us/howtotell/Hardware.aspx

3 more replies
Relevance 63.96%

I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.

Answer:The driver \Driver\WudfRd failed to load for the device .......

Disabling hard disk hibernation solved the problem for me.

Just go to Power options -> Advanced Settings -> Hard Disk -> Turn off hard disk after -> Never

Hope it helps

Gal

9 more replies
Relevance 63.96%

Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`

Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)

This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:

I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.

My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):

Anyone else run across this condition or have a known solution using the latest driver?

Thanks,

aardvark

More replies
Relevance 63.96%

*** Problem has reappeared, so this is NOT a solution ****
It worked for 5 reboots, so strange it reappeared

Been searching for days to find a solution for this problem (including fresh installs of Windows 10 etc), and today accidentally found it ... for my Asus Maximus V111 Formula at least, but it may also work on other motherboards

In BIOS, ensure that the XHCI Hand-Off is set to ENABLED (default is disabled)

I changed this, and now I can boot the system with USB devices inserted, and not get any Kernal-PnP warnings

Hope this helps somebody else

mfG
Dave

More replies
Relevance 63.96%

*** Problem has reappeared, so this is NOT a solution ****
It worked for 5 reboots, so strange it reappeared

Been searching for days to find a solution for this problem (including fresh installs of Windows 10 etc), and today accidentally found it ... for my Asus Maximus V111 Formula at least, but it may also work on other motherboards

In BIOS, ensure that the XHCI Hand-Off is set to ENABLED (default is disabled)

I changed this, and now I can boot the system with USB devices inserted, and not get any Kernal-PnP warnings

Hope this helps somebody else

mfG
Dave

Answer:The driver \Driver\WudfRd failed to load for the device (NB. FOR USB)

See if this helps
> Type Services into the search box. Run the Services desktop app
> (You may need to click the column header to sort services by their name )
> Right click on Windows Driver Foundation.
> Select Properties and set Startup Type to Automatic
> Reboot

11 more replies
Relevance 63.96%

Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`

Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)

This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:

I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.

My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):

Anyone else run across this condition or have a known solution using the latest driver?

Thanks,

aardvark

More replies
Relevance 63.96%

At Windows 10 startup this Warning appears in my Event Log as Event ID: 219.

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{a1c931b2-3b00-11e5-9c14-806e6f6e6963}#0000000008100000.

I know why this happens. The device in the message is an internal SATA AHCI hard drive. All AHCI drives, even internal ones, are considered removal or hot swapable. It even causes the safely remove icon to appear sort of like it was a USB drive. It happened on Windows 8.x. Don't remember if it happened on Windows 7. I can't make any changes in my BIOS to make it not hot swapable as there is no option for this drive.

The fix to get rid of the message in W8 was to modify the Service 'Windows Driver Foundation - User-mode Driver Framework' Changing the Startup type from Manual to Automatic fixed the problem. However, on Windows 10 this method does not work.

I can't disable the Service as it's needed for other devices. Just wondering if anyone found a nice clean way to get rid of the warning message like in W8?

Answer:The driver \Driver\WudfRd failed to load for the device .......

I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.

4 more replies
Relevance 63.96%

I'm getting this error once a day, where my computer crashes, and the only way to turn it off is to reset it and turn off my charger so I can turn it on again. What can I do?

Answer:The driver \Driver\WUDFRd failed to load for the device

anyone?

1 more replies
Relevance 63.96%

I have this computer what for some reasons wont install USB Smartcard readers.
Its Win7 64.
I have tried different smartcards but they wont help, also i tried to install drives manually but still wont work. I uninstalled and installed drivers many times.

Also i tried, but didnt work:
Change the 'Windows Driver Foundation - User-Mode Driver Framework' from 'Manual' to 'Automatic'.

Also the error from events.
http://i.imgur.com/hP7Mu3L.jpg

I found something like this.
https://svn.eesti.ee/projektid/idkaa...r/atrfiltr.inx

Should i try it or would it be easier to just format the computer. Its a work pc and it wont take long time, there isnt that much stuff on it.

Answer:The driver \Driver\atrfiltr failed to load for the device...

Update Chipset and USB controller Driver.
It would be helpful if you can send us a screenshot of Device Manage while Card reader is connected.

3 more replies
Relevance 63.96%

Hi,

I'm been having issues a looong time with different sorts of BSOD's but I've been able to cook it down to this last one after replacing both graphics card and Logitech headset.

Latest error which occuring at least once per day:
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{01539fd4-4f12-11e4-824c-806e6f6e6963}#00000000007E0000.

This happens very random and I'm really lost here.

Thanks! / Micke

Answer:The driver \Driver\WudfRd failed to load for the device

Hi Frostflake,

Welcome to the 10forums.

Please uninstall Avast and use Windows Defender as alternative.
Avast - Uninstall Completely - Windows 7 Help Forums


Code:
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys

ffffd000`22a74e98 fffff801`8ed3493cUnable to load image aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0x5493c

8 more replies
Relevance 63.96%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 8103 Mb
Graphics Card: Intel(R) HD Graphics 3000, -1988 Mb
Hard Drives: C: Total - 476837 MB, Free - 271044 MB;
Motherboard: ASRock, Z68 Extreme3 Gen3
Antivirus: AVG Internet Security 2014, Updated and Enabled
-----------------
Problem:
My Windows 7 Professional "Explorer" tree (not Internet Explorer) no longer lists my CD/DVD ROM DRIVE under the Device Manager/Drives. It used to.

I've checked the System Registry and it has lots of info about that ATAPI drive, but my system fails to find the "cdrom" driver (which is the one Windows 7 uses by default). It's not a 3rd-party driver.

The tray on my CD/DVD drive opens and closes properly. Windows just won't recognize the drive, so I can't use it.

I'm hoping someone can offer a 'manual' solution to get it working again. I do not want to spend a month to reinstall my OS and tons of hard-to-configure software. I've read countless other posts and solutions, both here and on MS's sites. The info on MS's sites is not even understandable. It's too vague and often doesn't even apply to my situation.

Note: The error (7026) message is:
"The following boot-start or system-start driver(s) failed to load:
cdrom"

-----... Read more

Answer:Error 7026 "The following boot-start or system-start driver(s) failed to load: cdrom"

8 more replies
Relevance 63.55%

All,

Firstly thank you in advance for any help. I have had a read through the common questions section and tried a few things but to no avail!!

Firstly my laptop is a Acer Aspire 5738z with an Intel T4200 processor.

I bought the laptop with Vista however i was never very impressed and when the OS seemed to get corrupted i decided it was time to try 7 but have been unable to install it.

The installation gets all the way through and restarts. it then comes up with and error:

File: \Windows\system32\DRIVERS\q12300.sys

status: 0xc00000e9

info: Windows failed to load because a critical system driver is missing, or corrupt.

I have deleted the Acer recovery partition and downloaded drivers from the Acer website however each time i get a the same error but with different .sys files.

Am i missing something or is this just a case of getting the correct drivers loaded for the install to work. I have tried numerous combinations and am running out of patience!! PLEASE HELP!

Answer:critical system drivers missing

Hi there, I hope you're doing a Clean Install Windows 7

9 more replies
Relevance 63.55%

I've read the threads on mising NLS, but could not find any valuable info on my problem.

1. I get the 0XC000000f windows failed to load because NLS data is missing or corrupt.

2. I have tried to boot with a Vista install DVD. Result: Blue screen and message;
a problem has been detected. Technical info: STOP: 0X0000C1F5 (0X00000000,0X00000000,0X00000000,0X00000000,)

3. I took out the hd and connected it exiernally to another pc. Result: Exactly the same, when the external hd starts running, my pc gets the blues screen message.

4. I have tried safe mode and repair, but I cant do anything because when booting with the dvd install disc I get only the blue screen, and when booting from hd, and try safe mode or any other option, it doesnt work.

5 . Technical info: ACER laptop The drive is a seagate barracuda 120gb 5400 2,5

I read about replacing NLS via a usb stick, but how can I do it? The commando prompt doesnt work either.

Grateful for any help!
Krister

Answer:Windows failed to load- missing NLS

I see no one knows how to fix this problem.
I thought I would get some brilliant answers from the brains here, but no.

2 more replies
Relevance 63.55%

Hi,
Hope anyone can help with this?
Acer Aspire 5336 Laptop running Win7 Home Premium OA.
At boot, windows fails to load giving the above error. Tried to restore factory settings but fails at 52% stage with i/o error. BIOS shows SATA Port0 Disk status=frozen.
I have a 'boot any non-loading system to win xp' disc which i tried and loads the 'mini' xp system and Disk Management shows the C: drive as healthy.
Not sure whether this is a case of replacing the hard drive or whether it can be recovered ok...if its a new hard drive i've got more problems as there is no recovery disc!
Any ideas would be most welcome & thanks for looking.
 

Answer:Win7 fails to load - oxc000000f - nls data missing or corrupt

The drive may be good but the Windows 7 files may be corrupt. In any case, you will have to have a way to load Windows 7 again
 

1 more replies
Relevance 63.14%

Hey! So recently i had to move my desktop around in order to install a new desk and ever since my computer has had A BSOD.The Error is as follows 
             The Operating system could not be loaded because a critical system driver is missing or contains errors 
File: Windows\system32\DRIVERS\nvpciflt.sys
Error Code: 0xc000007b
 
I have Windows 10 (my operating system for about a month) on a flash drive in order to repair the files however i cannot access my keyboard or mouse. I've tried changing the ports and none of them seem to be providing power. I can't even access the bios at this point. Any help would be greatly appreciated!

Answer:BSOD Critical Driver Missing but Keyboard/Mouse won't work

Hi. . .
 
If you've had to carry around a USB stick with Windows 10 OS on it for the last month for the sole purpose of replacing corrupted Windows files, it's time to reinstall Windows. 
 
W10 was a beta version and therefore potentially subject to unstable behavior.
 
Is Windows 10 actually installed on the system's internal HDD or SSD?
 
Bugcheck 0x7b - Inaccessible boot device; Windows cannot locate the HDD partition with Windows on it.  It can't find the hard drive.
 
You can run SeaTools for DOS, long test to test your HDD - http://www.sysnative.com/forums/hardware-tutorials/4072-hard-drive-hdd-diagnostics.html
 
Windows 10 RTM was released yesterday. 
 
Revert the system back to it's prior OS -- if W7, W8, W8.1, upgrade to Windows 10 for free - https://insider.windows.com/
 
There is a W10 90-day trial available - https://technet.microsoft.com/en-us/windows/dn798751.aspx
 
Regards. . .
 
jcgriff2

2 more replies
Relevance 62.73%

I'm using a Lenova K410 Idea Centre Box. The last time it was used there were no problems, and it shut down without problems. During the next boot it went directly into recovery, indicating that PC/Device needed to be repaired due to subject error. Due to missing file instead of using the recovery option it instructs to select F8 for recovery tools, which does nothing or select return to try again. It gives error code 0xc000007b as the cause. So far I have downloaded to a flash drive, booting file from Microsoft in hopes to be able to boot off of flash drive into safety mode to try to recover. Unfortunately my effort came without success. If anyone has any idea how to fix this problem it surely would be appreciated. The warranty has long expired, so I'm at the mercy of the court.
 

More replies
Relevance 62.73%

Hi everyone. I was hoping some of you could help me whit my windows 7 installation problem. Apologies in advance for my english skills. I couldn't find a topic for my problem so I started a new one.
 
I was meddling whit my old Computer and tried to clean install Windows 7 from CD using Sandberg external dvd drive. I set the correct boot order and booted from external device.  Windows files started to normally load files, but after it was finished I got an error message of a missing or corrupted file. I tried to boot the Computer several times and everytime  error message is the same but the missing file is different. I tried multiple boot options and also tried to restart Windows in safe mode. It just says that there is no operating system installed no matter what I do.  I've had some problems whit USB ports on the old Computer before. Could this be causing the problem?
 
Im clueless what to do next. Thanks for help in advance.

Answer:Windows 7 failed to load because a file is missing

Since you attempted a clean install...just use the Windows install disk to delete current existing partitions...then try again.
 
Before attempting an install of Windows...it's basic to ensure that the drive on which Windows will be placed...is without problems.  This can be done by attaching said drive to another system as a secondary...then running the hard drive manufacturer's diagnostic.
 
Louis

8 more replies
Relevance 62.73%

Gents

genuine Vista Ultimate SP2

My wife's laptop is currently suffering from this issue and I am having real trouble solving it. I have googled several pages and tried several methods but sadly nothing is working.

I have even tried downloading a new propsys.dll but don't know how to get it into the system

I can boot to a screen which gives me the logonui.exe failed to load box. tapping it several times and it gets to the login screen. I write the password but the failed to load box appears again several taps and it starts to load but to a black screen. I can start taskmgr via CL+ALT+DEL and open a few programs but I cannot get anything of help to work.

I have run scf \ scannow and got "found corrupt files but unable to fix"

I can't access the log file as it's not found and the browse doesn't work either


I have tried a start up repair , restore (none found) and scanned with malwarebytes in safemode via tskmgr= Mbam.exe

I do not want to do a clean install and I can only wonder if there is a solution or perhaps I need to upgrade to W7 which I would hope would solve the missing propsys issue??

Any assistance most welcome


Richard

Answer:logonui.exe failed to load propsys.dll missing

propsys.dll appears related to Office - http://support.microsoft.com/kb/928149

See if repair/ install helps -

http://www.vistax64.com/tutorials/88...all-vista.html
http://www.vistax64.com/tutorials/91...up-repair.html

Regards. . .

jcgriff2

`

1 more replies
Relevance 62.73%

I get this message often and whenever I do, my Windows runs in slow motion The driver \Driver\WUDFRd failed to load for the device HID\VID_1B96&PID_0006&MI_01&Col02\8&1c39cefe&0&0001. What should I do?

Answer:The driver \Driver\WUDFRd failed to load

you ever resolve this?

1 more replies
Relevance 62.32%

When i start my computer up I get the message Error 7323 1 or more network drivers failed to load.

Answer:Driver failed to load

If you are networked then you have trouble beyond my experience.If not, then which Windows are you running 95-XP?Try Google with error+7323 and see what turns up......and maybe my posting will encourage someone with wider knowledge to help you.

7 more replies
Relevance 62.32%

I turned off System Restore in order to run Superantispyware and when I tried to turn it back on ,,System Restore encountered an error to enable/disable one or more drivers failed to load. Restarting did not help. With some help by googling my problem i was lead to event manager and found errors at the time I tried to turn System Restore back on. "The following boot-start or system start driver failed to load" It listed nvatabus and nvraid. I have ran Superantispyware with System Restore off9because I cannot get it turned back on) but I have not tried it in safe mode. Should I try running it in safe mode or do you have any other suggestions or reasons why these drivers will not load? Thanks a bunch for any help you can give me with this!!!
 

More replies
Relevance 62.32%

Hey there last night I went to update my driver and got a driver install failure. So I uninstalled old drivers and other nvidia related software and went to reinstall. After uninstalling the drivers my GPU no longer shows up in device manager, after much trial and error.
1.Tried ddu and did it again trying old drivers
2. Tried updating through device manager (scan for hardware changes)
3. Reseating the GPU
4. Windows update, the windows update failures led me to an error: 0x800703f1
5. Tried updating my windows to a newer build version which gave me the "something went wrong" error message.
After running sfc /scannow I got this message Windows resource protection found corrupt files but was unable to fix some of them. I have a log for it but I have no idea how to read it. If anyone could please help. I have sunk 12 hours into this problem since last night and want this nightmare to be over.

i5-2500
8 GB Kingston
GTX 1060 3GB
Asrock z75 pro3
Corsair tx650
Here is the log information
2017-04-08 10:08:43, Info CBS CbsCoreFinalize: AppContainerUnload
2017-04-08 10:08:43, Info CBS CbsCoreFinalize: WdsUnload, logging from cbscore will end.
2017-04-08 10:08:43, Info CBS Ending TiWorker finalization.
2017-04-08 10:08:43, Info CBS Ending the TrustedInstaller main loop.
2017-04-08 10:08:43, Info CBS Starting TrustedInstaller finalization.
2017-04-08 10:08:43, Info CBS Ending TrustedInstaller finalization.
2017-04-08 10:23:19, Info CBS TI: --- Initializing Trusted In... Read more

Answer:Nvidia driver install failed win 10 corrupt registry? Error 0x800703f1

How, specifically, did you "uninstalled old drivers and other nvidia related software"?

Do you have a System Restore Point that is dated before you started trying to fix the problem?
You might try a System Restore before a reset.

Have you tried to install the newest nVidia driver package, choose custom installation, and check the box for "Perform a clean installation"?

6 more replies
Relevance 62.32%

This must be one you guys have heard before, however i think mines a little differernt.

Ok i boot my comp and just before loading screen it comes up with
Windows ould not start becuase the following file is missing or corrupt:
\Windows\System32\Config\System

Now, i have found what microsoft says to do, which is to put a windows CD in and press r, to go to the command promt screen in order to put in a whole lot of code. Fair enough i say, looks easy enough.

One problem though, i put my windows disk in, i press r. At this stage the instructions say the black screen should first ask me for a password to log in as admin however mine doesn't. I then go to type in the first bit of code the microsoft instructions tell me to type which is MD TMP i then get a message saying access denied! i type help, see a list of commands and found the logon command, so i tried that except it doesnt give me a list of admins where i should then be able to type in the password and log on in order to be able to type the code which microsoft has to me to type.

Any help would be greatly appreciated! i really cbf formating my hardrive.

btw running windows XP SP2. Comp is P4, 1gig ram. fx5700 graphics card.
PS: instructions i am refferring to are
http://support.microsoft.com/kb/307545

Answer:No boot, File missing or corrupt: windows\system\config\system

Went through the same thing with my older computer (HP Pavilion 502n/WinXP Home). Nearly brand new when it was given to me by a friend, three years ago, who forgot to give the Windows recovery disk. Then in mid August, it pulled a similar stunt as yours.

At First it was blackscreen with "Windows not shutdown completely and options to go into "safemode" or normally. That lasted a couple of times when it suddenly would not complete the boot up and got a similar message as you did.

Took it to a computer tech, who found a BIOS glitch and thought he had fixed it.

Then three weeks later, in early September, it did it again. Would not boot up completely several times. Then it finally did....after going online for a while, it started crashing and restarting every 20 minutes. Eventually it finally did boot up to show something else on a blue screen with a list of checking files systems on C: with this:

1 of your disks need to be checked for consistency. You may cancel the disk chk at any time.
CHKDSK is verifying files (stage 1 of 3)
CHKDSK verifying indexes (stage 2 of 3)
Deleting index entry CAUGNJQR in ...and on and on until it reached 94% and crashed.

another boot and it was CMOS Checksum and so on.
At fourth bootup, it finally reached screen with F keys and I hit them to go into Safemode and HP system recovery (non destructive file mode).

After five hours, it completed that and Crashed. I finally boxed it up for a couple of days to take back to the... Read more

8 more replies
Relevance 62.32%

I am using Windows 7 Home Premium 64 Bit

I have custom Libraries, and back them all up to a 500GB external hard drive. I use the built in Windows Backup and Restore Utility. All of a sudden when I try to perform a backup, I get this error -

Answer:[SOLVED] Critical BitLocker System Files Missing

Bump, anything?

I have a Windows 7 Home Premium OEM disk. Can't I copy the file from the disk to my hard drive?

13 more replies
Relevance 61.91%

I have toshiba satellite P300 -23L and i have windows vista installed.
I received this error on starting it
Windows failed to load because the HAL is missing, or corrupt
I dont want to loose my data either is there any way to repair it without loosing data

More replies
Relevance 61.91%

When stating Win 2000 I get a message that reads missing or corrupt C:\winnt\system\config\system-ced file
I am instructed to intall the win 2000 disk and hit "R" for a repair but I keep getting asked for the Emergency Repair Disk. I dont have one or how do I make one. Please help thanks in advance.

?? What causes this error and how can I keep it from happening again because I think this happened before but I dont recall how I resovled it.
 

Answer:Missing or corrupt C:\winnt\system\config\system-ced file

6 more replies