Computer Support Forum

Windows update "the page failed to load"

Question: Windows update "the page failed to load"

Vista Home Basic SP2. When I try to run Windows update all I get is a blank page that says "The page failed to load". I've looked all around and have found a lot of people with the same or a similar problem but no firm solutions. I haven't used it in maybe a week and it's worked fine up till now. There have been no real changes since I used it last. Does anyone have a clue?

Relevance 100%
Preferred Solution: Windows update "the page failed to load"

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Windows update "the page failed to load"

Originally Posted by drelectron


Does anyone have a clue?



Many possible explanations -wrong system settings,3p software,viruses...

Try advices from this link:You cannot install some updates or programs
reset IE Internet Explorer - Reset

Uninstall non-system firewall,antivirus,antispyware

Reset WU with "aggressive mode" How do I reset Windows Update components?

Viruses also cancause this.Because scanning on allive system is not credible because many viruses can hide before antivirus I suggest use LiveCD with antivirus for example this one Dr.Web LiveCD is a software product that features a standard, Dr.Web scanner ,burn boot it and scan.
If nothing help find WindowsUpdate.log file in C:\Windows pack it and attache to post.

4 more replies
Relevance 93.67%

Windows Update Won't Load--gets error-"This page failed to load". My system=32 bit operating system which is Vista Ultimate.

Answer:Windows Update Won't Load--gets error-"This page failed to load"

Hello sgibbins,
Try here, people have had some good results doing this. please post your results. Good luck.


JSI Tip 2805. Windows Update 'Cannot Display Page'?

7 more replies
Relevance 92.8%

Legitimate copy of Win Vista Ultimate SP1, all updates through last week ...

When I attempt to open Windows Update, I get an error message "The page
failed to load".

A google search found nothing but the suggestion to delete "System32", am I'm not going there!
 

Answer:Solved: Windows Update "The page failed to load"

10 more replies
Relevance 76.85%

Hi

When I right click My Computer on Vista Start menu the page says "The page failed to load"

I enclose a screenshot of the error.

I was also get "the application has failed to start because WINBRAND.dll was not found" when running

SystemPropertiesAdvanced

From RUN

This has now been fixed by downloading WINBRAND.dll and copying it to c:\windows\system32

But "The page failed to load" still happens when right clicking My Computer and choosing properties.

I did a SFC / Scannow and something weird happened. The Command Window had an error (apologies - forgot to note which but will rerun in a moment) however the CBS Log File showed no errors and indicated SFC ran successfully.

I will post the results of SFC in a few moments

Thanks for your help.

*************************************************
 

Answer:Solved: "The page failed to load" Control Panel > System

11 more replies
Relevance 76.56%

Win 7-64 on Gateway FX6860 i7 system 8gm ram tons of HD space.
========================
Got "Page Failed to Load" error attempting to change my Win7-64bit display resolution.
This used to work, but no more ( don't know what might have caused it)

I ran "sfc /scannow". SFC reported that there were corrupted files that could not be repaired or replaced and to look at CBS.log. I did but can make no sense out of it.

Please find that file attached -- Any help will be appreciated.....

thank you,
Chuck

Answer:"Page Failed to Load" error attempting to change my Win7-64bit display

Run the system file check again. Sometimes it requires multiple runs. Reboot after each run (or before the first run if you have not rebooted since the last time you ran the check).Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.

2 more replies
Relevance 76.56%

Several days ago there was a large number of updates available to download. I allowed the system to update all of them. Three, KB974234, KB972581 and KB973709 it was shown on the update history page as failing to download.
Reading as to a possible solution, I tried to load them manually, saving those files to my desktop, right clicking on each, to run as an administrator. After each loaded I got a message telling me they were already installed on my system.
My question is why does the "failure" notice remain on my history page and how can I delete those three file entries?
Thanks much,
Lee

Answer:History page notes they "failed" to load

Simplest way to reset WU history is stop for the moment Windows Update service and remove C:\Windows\SoftwareDistibution folder...

4 more replies
Relevance 100.86%

HI,

I'm getting this stupid error when trying to view: Control Panel\System and Security\System

"The page failed to load"

Don't know if you need it but I added a HJT log...

Thanks!
 

Answer:"The page failed to load" Control Panel\System and Security\System

16 more replies
Relevance 100.45%

I got my dell few days ago. Installed it with Samsung EVO 850 SSD 500 Gb and Kingston 8GB PC3L - 12800 SODIMM.The Windows 10 Home OEM home is installed on HDD 1TB so I decided to use Samsung Data Migration software to clone the data to SSD. However, the OS crashed and decided to install a fresh Windows 10 Enterprise to SSD and deleted the previous OS on HDD using diskpart.Now after Installing Windows 10 Ent OS files. Every after BIOS run, I got BSOD errors "MEMORY MANAGEMENT" + "Page Fault it non paged area" + "IRQL NOT LESS OR EQUAL" 

More replies
Relevance 93.48%

For whatever reason, I have a bunch of "failed" updates listed under the WU history. They were all cumulative updates for various months. I've done a malware scan, system file check and DISM, all of which were clean.

All cumulative updates have successfully installed the last 4 months in a row. The OCD in me just wants to delete the failed entries from the list because they bug me.

Can this be done?

Answer:Deleting "Failed" entries in Windows Update history

Hey vram,
As far as I know, you can't clear/delete just the failed updates, but you can clear the update history (it clears everything).
Clear Windows Update History in Windows 10 Windows 10 Windows Update Activation Tutorials

more replies
Relevance 93.07%

I just noticed that everytime I hit "check for new updates" a failed update is added to my update history called "Upgrade to Windows 10 Home" (3 so far). It has no KB number. The error number is 80240020. When I click on more info or help it goes to the microsoft "Windows 10 Insider Preview" pages, which I have not joined or had anything to do with.

Searching for the error number 80240020 I get info about a "zune software installation failure". Yikes!

Perhaps this has something to do with the imminent Windows 10 rollout, but for now it is not working very well!

Answer:Failed update "Upgrade to Windows 10 Home"

Having the same problem here. It'd be nice if Microsoft would say it's normal. I'm too paranoid for this... hehe

3 more replies
Relevance 92.25%

My Windows Update history is filled with failed Upgrade to Windows 10 Pro entries. They seem to date to each time I start up my computer. Here is an example.


Quote:




Upgrade to Windows 10 Pro

Installation date: ‎8/‎22/‎2015 7:44 PM

Installation status: Failed

Error details: Code 80240020

Update type: Important

Install the next version of Windows.

More information:
Help with upgrading to Windows 10 - Windows Help

Help and Support:
http://go.microsoft.com/fwlink/?LinkId=507417




I am stalling on upgrading until Windows 10 for a couple more months, so how do I get Windows to stop doing this?

Answer:Windows Update history is filled with tons of failed "Upgrade to Windows 10 Pro" entr

Open Windows Update and let it Check for updates. Right click the Windows 10 Update and Hide it.

1 more replies
Relevance 92.25%

Windows continually fails to update this module:
Update for Windows 7 for x64-based Systems (KB2952664) -I have retried over and over, it continues to fail.
Error in windows update is:
Error: "WindowsUpdate_00003701" "WindowsUpdate_dt000"
So far there has been no solution provided.

More replies
Relevance 91.84%

I've been having malware issues lately, and have performed numerous scans with different programs:

MalwareBytes (removed several threats)
Avira Antivir (found nothing)
Ad-aware (bad cookies)
Safety.live.com - found items but couldn't fix it

The popups (more like new tabs, as I had the popup blocker enabled) have stopped, and it seems to be running better, but the weird thing is I can't access Windows Updates. It just says "This page cannot be displayed".

Also, the yellow shield in the system tray shows up when you first boot up, but then it goes away, as if a program/registry entry has not loaded yet when that icon first loads, but then kicks it out when it does load up.

We did some searches, and found that we should just run HiJackThis and post the log for you smart guys to analyze.

So, here it is.

Thanks!
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 4:14:34 PM, on 6/21/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Safe mode with network support

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware\AAWService.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Lavasoft\Ad-Aware\AAWTray.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox\plugin-container.exe
C:\Doc... Read more

Answer:HijackThis Log - When trying to access Windows Update..."Page cannot be displayed"

16 more replies
Relevance 91.43%

Hi all, this really wierd bug just happened and not sure what to do. My homepage is stuck at "http:///" and can't change it no matter what. The other problem is no matter what page I visit, there is no "windows internet explorer" in the title bar.I'm not sure if this is a virus or just a bug. I had IE 6 with this problem then upgraded to 7 hoping for this problem to disappear with no luck.Any help would be highly appreciated.Thank you

Answer:home page stuck at "http:///" and can't see "windows internet explorer" in bar

Will Firefox work OK?

1 more replies
Relevance 91.43%

I'm posting this in the Vista forum because this has never happened with Windows 2000 or XP.

I bought two exact duplicate models of hard disks. I set up Vista Ultimate on one of my systems. I used Acronis True Image 10 to clone the operating disk to the factory-new, never-used, same model disk as a backup drive in the event the first disk failed. I put in the clone to be sure it runs; but, I get the error mentioned in the title of this thread.

Now, if the second disk is supposed to be a clone of the first, why does this happen and how can I fix it?

I'm not married to Acronis for this job so I would use any disk cloning tool that makes a sector-for-sector copy. I use Norton Ghost 2003 for making sector-for-sector raw image (forensic) copies of PATA drives; but, these are SATA drives and Ghost 2003 simply sits there like Tarbaby and he don't say nuttin' to no SATA drive.
 

Answer:"Windows failed to start" "\Windows\System32\winload.exe missing or corrupt"

7 more replies
Relevance 90.61%

When in a web forum I make a post I then do a "back" page to get back to the forum list. Always when I do this the page is as it was before I made my post. To see my post I must refresh the page by hitting F5.

Is there a way of working within Windows 7 that would automatically refresh any page I go to without me having to hit F5?

Answer:Why does Windows not update a "back" page

Goto;
Internet Options, General, Browsing history Settings, set Automatically, Done.

2 more replies
Relevance 90.2%

This only happened once immediately after reboot following removal of Comodo Firewall 3.5.This event has never repeated after many reboots.I have not seen any subsequent errors of any sort.Does the absence of repetition indicate that Windows succeeded on the next reboot,or that Windows has given up trying to mend a fatal wound ? ? ?There were 4 off such error events within 1 second, designating these *.MOF filesC:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V1.1.4322\ASPNET.MOFC:\AC30D119A40F2C8C8708A20576\I386\LICWMI.MOFC:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V3.0\WINDOWSCOMMUNICATIONFOUNDATION\SERVICEMODEL.MOFC:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V2.0.50727\ASPNET.MOFI later found that starting a few seconds before that, and finishing a few seconds after,there were 51 *.MOF updated time stamps in C:\WINDOWS\System32\wbem\AutoRecover.Comparing Acronis images of C:\ taken before and after removal/replacement of the Firewall I see :-4 original *.MOF files that retained timestamps of last year and before7 original *.MOF files that were halved in size as they were modified44 brand new *.MOF files I have not seen before.Do all these extra *.MOF files in ...\wbem\AutoRecover indicate a major disaster ?Does the absence of further WinMgmt event 4 errors show recovery without failure on the next reboot ?Does the continued presence of all these *.MOF files show that after recovery Windows was too lazy to delete redundant files ?Or has it left it all for me to try and recompile or something ?I am hoping t... Read more

Answer:Winmgmt Event 4 :- "failed To Load Mof ... While Recov"; 51 new wbem\*MOF files

bump

1 more replies
Relevance 90.2%

Hi,
I am getting the error, "Symantec AntiVirus Auto-Protect failed to load.". Not sure what happened the reason for this. I see the Symantec Icon circled with red-cross in Systray. Looks like my Laptop is unsafe.

Please help.

Thanks,
Sid
 

Answer:Getting the Error - " Symantec AntiVirus Auto-Protect failed to load."

I would recommend uninstalling/reinstalling the Symantec software.Do you have the CD or was it preinstalled on the system?
 

1 more replies
Relevance 90.2%

I removed Comodo 3.5 Firewall and completed removal by rebooting the P.C.
I then checked the event logs to confirm all was well.
I found in the Application Event log that about 1 minute after that latest reboot and login there were 4 errors.

All 4 errors were
Event Type: Error
Event Source: WinMgmt
Event Category: None
Event ID: 4
"Failed to load MOF" {specific file} "while recovering repository file."

The specific files were
C:\AC30D119A40F2C8C8708A20576\I386\LICWMI.MOF
C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V1.1.4322\ASPNET.MOF
C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V2.0.50727\ASPNET.MOF
C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V3.0\WINDOWS COMMUNICATION FOUNDATION\SERVICEMODEL.MOF

Incidentally both the ASPNET.MOF files had a last access date from last year,
so I seems to me that the "Failed to load MOF" was because the was no attempt to read them.
Also .NET v3.0 was purged last year, so the fourth item no longer exists ! ! !

I never knew till then that there had ever been any need to "recover repository files".
There were no further errors when I rebooted 4 times in succession,
so I assumed it was a "one time" failure to recover, and upon the second reboot a full recovery was achieved.
Did I do Good ? ? ?

I then installed Comodo 3.10 Firewall, and the next application event was
Successful auto update retrieval of third-party root list sequence number from:
<http://www.download.windowsupdate.com/msdown... Read more

More replies
Relevance 90.2%

Hi Guy
I'm using win 98 and cannot get my Viavoice working.
I keep getting "FAILED TO LOAD LOCAL LANGUAGE MODULE".
This has been an ongoing problem for some time, and was part of a software package from "Time". I've also installed IBM software as a separate voice programme but can't get this to run satifactorily. Time Help is no help, perhaps you can help? Much appreciated in anticipation. Many thanks.

Dicksee

PS Have spent loads of money with "Time"without satisfaction.
 

Answer:Viavoice "FAILED TO LOAD LOCAL LANGUAGE MODULE"

Dicksee
Welcome to TSG!

Not sure if I can help but will try......
It sounds as if you have an incomplete or corrupt installation.
When this happens to any software program the best solution is to uninstall and reinstall the package.
1) Go to start\settings\control panel\add-remove programs and locate the via-voice line listing. Highlight it by left clicking and select remove.
2) If there are other entries referring to voice software remove them to.
3) Restart system into safe mode. During restart keep tapping the F8 key until a selection screen appears and arrow to select "Safe Mode" then hit enter.
4) Once in safe mode go to start\find-search\files and folders and type in *.cpl then hit enter
5) A listing of all control panel applets will appear in right pane.
6) Locate SETNOTE.CPL
7) Right click that applet and select delete.
8) Restart system into normal mode and reinstall the via-voice package.
Note: Make sure you anti-virus software is disabled before and during install.

Hope that helps.....

Dave
 

1 more replies
Relevance 90.2%

As of the last week, have been experiencing issues with extreme slowness. Reset Firefox to defaults, did not help. PC slows/freezes, when tried to launch task manager, CTRL-ALT-DEL, get message "Failed to load security options" then screen stays black with only that message. At times never unfreezes. After a hard re-boot, goes straight to recovery mode. I have noticed that there are certain error messages such as failed updates. And also, my security defaults have been "turned off" at least once without my doing......... Yikes! I have done a recovery to previous date, and that has helped, but then it starts all over again.... Certain start up items dont load and then the freeze comes again. And again the "Failed to load security options".....

Here are the logs... I believe i got them all....

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 10:51:20 AM, on 6/7/2014
Platform: Windows Vista SP2 (WinNT 6.00.1906)
MSIE: Internet Explorer v9.00 (9.00.8112.16545)
Boot mode: Normal

Running processes:
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Windows\system32\taskeng.exe
C:\hp\support\hpsysdrv.exe
C:\Program Files\Hewlett-Packard\On-Screen OSD Indicator\OSD.exe
C:\Windows\RtHDVCpl.exe
C:\Program Files\Lexmark X1100 Series\LXBKbmgr.exe
C:\Program Files\Common Files\Symantec Shared\PIF\{B8E1DD85-8582-4c61-B58F-2F227FCA9A08}\PIFSvc.exe
C:\Windows\system32\schtasks.exe
C:\Program Files\Common Files\Pure Networks Shared\Platform\nmctxth.e... Read more

Answer:Very Slow, Often get "Failed to load security options" and freezes

16 more replies
Relevance 90.2%

I am trying to get rid of event viewer errors and warnings at bootup. This one still eludes me. It appears to be a driver error related to my Epson RX680 printer. Can someone give me a few tips on how to narrow it down further?

"The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_EPSON&PROD_STYLUS_STORAGE&REV_1.0 0#9&2856B3B7&0&070E018870865F0000&0#"





TIA

Answer:Event 219 "WUDFRd failed to load " warning at bootup

What have you already tried to fix the issue? Have you tried looking for an updated driver from epsons website?

3 more replies
Relevance 90.2%

I'll be referring to the image above. The second image that has to do with Outlook Express directly was caused directly after merging some partitions and then changing drive letters. I was using Partition Magic so Drive Mapper supposedly changed all references in the registry. I checked with Microsoft's solution to the problem, but it was of no help (http://support.microsoft.com/kb/191946). I would like to just completely remove Outlook Express if I could. As I was following the instructions, I deleted the registry keys I was supposed to which I think led to the first error message you see. I'm not completely sure though, it could have also been because I applied the Windows Vista Transformation Pack.

Answer:"Address Book failed to load" + Invalid root

*bump* Also, I should say that before the Outlook message used to pop up constantly (every 20 seconds or so) and I've gotten it to only pop up at startup by removing those registry entries.

2 more replies
Relevance 90.2%

Hello,
I've been experiencing multiple bluescreens daily and what's odd about them is they occur randomly while using many programs; however, I have noticed that they occur more frequently directly after opening a new tab, loading a new site or running a game (StarCraft II).
Looking through Event Viewer. I see a list of warnings and errors immediately prior to the BSOD. In chronological order:

9:07:18 PM CRITICAL- "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."

9:07:28 PM WARNING- "The driver \Driver\WUDFRd failed to load for the device USB\VID_0483&PID_2016\5&249af6f9&0&2."

9:07:42 PM ERROR- "The previous system shutdown at 9:05:49 PM on &#8206;7/&#8206;13/&#8206;2011 was unexpected."

9:07:44 PM ERROR- "The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0x0000099e0000007e, 0x0000000000000002, 0x0000000000000001, 0xfffff80002a92885). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 071311-32869-01."

9:07:47 PM ERROR- "Audit events have been dropped by the transport. 0"

I also get this warning quite often:
"The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 ... Read more

Answer:Multiple BSOD daily "\Driver\WUDFRd failed to load for the device"

10 more replies
Relevance 89.79%

I'm working on my mom's computer remotely via LogMeIn (Home Premium SP2). A persistent problem is an inability to update the system due to the Windows Update giving me a "The page failed to load" error. This happens after I click on the "15 optional updates are available" hyperlink in the Windows Update pane. There are no critical updates.

An initial Google search returned the most common cause as being "WindowBlinds" by Stardock. This program, however, is not installed on her computer (verified by a search of programs in the "All Programs" links, "Program Files" folder, "Uninstall or change a program", and a search for "stardock" in the registry.

"sfc /scannow" in administrative mode on the command line failed to return any errors.

I also went to Microsoft's relevant Knowledge Base article here and attempted to use the Fix It program to fix Windows Update. The program successfully ran and fixed the files that were damaged (whatever they happened to be), but this did not solve the issue.

Finally, I removed threats using SUPERAntiSpyware, reregistered some .dll files as recommended by Microsoft (IMPORTANT NOTE: Some of them failed), and restarted with non-essential services disabled and startup items disabled.
 

Answer:Windows Update > The page failed to load

bump
 

1 more replies
Relevance 89.79%

you've probably heard this before but everywhere I look forums only tell of how to fix or temporarily fix it. What caused this problem in the first place? also, I keep hearing about this thing called windows blinds but everytime I type it in on google it just shows actual window blinds for houses in the results.

I think my pc may have registry problems. If i fix those with the right software will everything be normal again? sometimes when I play my games it also just shuts down unexpectedly telling me a prob caused it to close.

Don't mean to sound like a noob for this stuff but it kind of bugs me how you have to do so much research and be a tech genius in order to use windows right. I mainly want to know about this stuff because I play crysis alot and it has taught me to fix and reconfigure things on my pc in order for it to run better and I'm happy about that but I don't really want to be a techie or pc enthusiast and have to go to computer school for 4 years just so I can run my game perfectly! its driving me nuts. so any help on what I can do to solve this? know its my fault for downloading freeware and things like that when I wasnt as knowledgeble but after this gets resolved I think I know enough about pc's now to prevent any future problems. thanks guys.

Answer:page failed to load in windows update?

If you really have message "The page failed to load" then I suspect it is caused by Windows Blinds or Stardock Colors or something another from Stardock if you have
Read all reports from here:The page failed to load, Vista Update

1 more replies
Relevance 89.79%

I'm hoping someone can help me fix this. I'm running Vista Home Premium 32-bit. In the bottom right if my taskbar it tells me update are ready to be installed, but when I click on it it says " The Page Failed to Load".

Answer:Windows Update Page Failed to Load

If you have installed Windows Blinds then surly this program is responsible for this issue

our commemorative book:The page failed to load, Vista Update

3 more replies
Relevance 89.79%

Trying to log into "Bitdefender" antivirus but it tells me I need Javascript which is already in my Chrome Browser. I checked Javascript in the browser and it had this error message "Failed to load resource: net::ERR_CACHE_MISS " What shall I do, uninstall it and reinstall?
 

Answer:Solved: Javascript error msg "failed to load"

Apparently it is a bug in chrome.
Source: http://craftcms.stackexchange.com/questions/5362/failed-to-load-resource-neterr-cache-miss
 

1 more replies
Relevance 89.79%

I am getting the error "Failed to load resources from resource file. Please check your Setup" This happens every time I try to access a Word document. I am using Word 2003 from the Small business pkg.

I searched on their site and there was a download for those who use the Outlook business contact manager also, which I do. I downloaded the file, when to install it and it says it is already there.

I am running Windows 2000, this just started today and my updates are up to date.

Any ideas? I can ignore the warning and work, if I click OK or the X, it shuts down Word.

Thanks!
 

Answer:"Failed to load resources....." error in word

Try the Detect and Repair option from the Help menu. You will need to insert your Office disc when asked.
 

1 more replies
Relevance 89.79%

This error message pops upafter I log on to my Windows Xp laptop. What does it mean and how do I remove it?
 

More replies
Relevance 89.38%
Relevance 88.97%

Hello, I hope I am posting this in the right thread. I have a Toshiba satellite laptop with windows xp. Recently, at startup I started receiving a message that says" One or more modules failed to load." "This process will be terminated." All of a sudden, most of my programs are not working correctly either. They won't open and each has their own message. For instance, Adobe Photoshop says they a registry file is missing, please reinstall. Another program says something about a runtime error. I can't even open my Norton anti virus software. This is so frustrating, does anyone know what could have happened and how I can fix this problem? My guess would be some sort of virus, but I really have no clue. Please help!! Thanks
 

Answer:message, "One or more modules failed to load"

7 more replies
Relevance 88.97%

I installed and uninstalled fruity loops (cause it wasnt working properly) and everything started going to shit. Im using XP Pro.

When i open internet explorer i get a "failed to load resource DLL" error message. When i click ok the program opens normally. This also happens when i right click on objects on my desktop.

I did a couple of virus scans and came up clean but when i tried to run auto update for norton it said i uninstalled it....which i didn't.

It also wouldn't let me play mp3s with windows media player, when i re-installed it it fixed that problem.

Anyone have any ideas what's causing this? Any help would be appreciated.
 

Answer:"failed to load resource DLL" error

Did fruit loops have a uninstaller?
.If so did you uninstall this way,
or did you uninstall through add/remove
 

8 more replies
Relevance 88.97%

Guys,

Please review this issue for me as I need the answer for my references. This sometimes applies to setting up a new Internet Connection in Win 95 or 98. Let's say, that you have set up a new Internet Connection with new ISP path settings. Your asked to do a system restart, you do a restart and all is well until you get to a second screen in the bios that either says:

"Ethernet Adaptor failed to load press any key to retry" OR

"Ethernet driver failed to load press any key to retry"

I can't remember what the message says, but it's one or the other! after the word "Driver" or "Adaptor" it gives the driver name. You CAN however still get into Windows by pressing any key....But, the message will come up until you remove the driver.

I vaguely remember that to remove this message you go under Device Manager, under "Networking" and remove a device that has an exclamation point under it (This removes the network driver that doesn't load) But what does this message mean and how does it happen to get there in the first place? I know that it happens when setting up a new Internet Connection sometimes, but I need to know the exact steps for removing the driver because I might be changing ISP's in the future, and need to know what to do if this message comes up again! Thanks!

Jack
 

Answer:What Does "Ethernet Driver Failed To Load" Mean?

i think the message means that the driver is corrupted/not responding

why it happens, i dont know, but if u are installing a separate software to connect to your isp, this software might be the problem

the proper way of removing the driver is to delete it from device manager
 

1 more replies
Relevance 88.97%

I get the above error message whenever I right click on a drive, file or folder. The dll is not specified. Google search came up with two other pleas for help regarding this error, neither of which was apparently resolved.
Upon clicking OK, Windows XP Home lets me perform the task ; move, delete, rename, properties or whatever.

Can anyone help me get rid of this annoyance?
 

Answer:"fAILED TO LOAD RESOURCE DLL" error

whush, first welcome to MG. I had a long reply typed out earlier, but lost it somehow. Trying again. Go to Start--->Run. Type in SFC and then <enter>. You MUST have your Windows Operating system CD loaded for maximum results. SFC (System File Checker) will check out all files required to run Windows and ask for various answers (courses of action from you) to the problems it finds, Read and re-read the courses of action carefully. Answer "ignore" first time round, if you are not sure of the correct answer. Proceed slowly, with a clear head and no sources of interruption. This may clear your problem, but will certainly help in other areas, at least. Bazza

PS I use W98SE, not XP, so there may be slight differences. Baz

===





whush said:



I get the above error message whenever I right click on a drive, file or folder. The dll is not specified. Google search came up with two other pleas for help regarding this error, neither of which was apparently resolved.
Upon clicking OK, Windows XP Home lets me perform the task ; move, delete, rename, properties or whatever.

Can anyone help me get rid of this annoyance?Click to expand...


 

6 more replies
Relevance 88.97%

Hello people. I have joined this site hoping to get to help with the issues I have after updating from windows 8 to 8.1. I have been pulling my hair out because after loading this update it has screwed up my laptop.

Firstly after my laptop eventually starts I get the following error message

REGSVR32
The module "C:\ProgramData\ljleKtopg.dat" Faile to load
Make sure the binary is stored at the specified path, or debug it to check for problems with the binary oe dependent .DLL files.

The specified module could not be found

The other main problem is

Sometimes when surfing the screen will freeze and sometimes it will start again after about 10 seconds, or it will just stay frozen and I have to switch the laptop off, and then restart it. When I restart it I get the following message on the screen, Configuring windows update, 100% complete, do not turn off your computer. This will stay on the screen for an average of 35 minutes before it goes, and my laptop starts. This happens a couple of times a day and it's doing my head in because it was fine before I had to do the 8.1 update.

Any help would be appreciated.

Answer:"C:\ProgramData\ljleKtopg.dat" Failed to load

As for the dat file; I'll take a wild guess that this might be the residue of a malware that Windows Defender or your virus program cleared up.
The name of the file seems random generated (typical of malware) and the fact that it's in Program Data also smells a bit fishy.
Doesn't seem like a legit name of a file. Perhaps your upgrade cleared out whatever it was.
Check your startup items in the Registry and in Task Manager to see if there is something Windows is trying to start that doesn't seem legit. I am not one to shout "virus" or be dramatic about that, but you might just want to do a scan of your windows directory, Program Files folders and your Users directory.

CCCleanear and HiJackThis tells you if something has been messing with your settings - consider running those for this type of problem.

As for you problems with Windows update - either just hide that update and forget about it, alternatively run sfc /scannow from the command prompt to correct anything funny on your setup that might prvent the update from goingin.

Since these are quite different issues they probably belong in different threads, particularly if it ends up taking a while to get to the bottom of it.

This was the short response - if you are unsure how to do any of what I suggested, please google it, and if it's still not clear, then post back here.

1 more replies
Relevance 88.97%

win 7
new error on reboots
" failed" what is a branding config and how do I get rid of it? please help---I am old and not too bright!!
 

More replies
Relevance 88.97%

Hey guys

this is a great and detailed tutorial and all worked as explained except to the last step...

I still can't get into my account, what sucks big time.

It looks like the password has been changed as the error message is not the same when I enter a wrong password.

It says some like "failed to load the user Profile" or to "failure to connect to the service to load the User" (it's in another language so I translate the best I can.

When I hit the OK button the login page will reload.

I ain't get the link to reset a new password in that process, that one I get only when I enter a wrong password. Anyhow, I don't have a password reset disc (unfortunately)

QUESTION

Can I use above tutorial and simply REMOVE any kind of password from keeping me out of my W7?

I can get till the last prompt where the tutorial shows to enter a new password, so maybe I can do this to get rid of the password too?

Would be awesoome

Thanks for Any Help whatsoever

Answer:"failed to load the user Profile"

Hello easycash, and welcome to Seven Forums.

For that error, you would want to use the tutorial below instead. Be sure to read all of it for all available options. You might give the system restore at boot option a try first.

User Profile Service failed the logon. User profile cannot be loaded.

Hope this helps,
Shawn

5 more replies
Relevance 88.56%

Hello

got this autorun.inf virus you know the one that does not let you see hidden files/folders among other things

I got rid of it but after that I constantly get "Page Load Error" in Firefox, not only in Firefox IE and Chrome too the curious thing for instance in Firefox I have to reload the page like 4, 5, 6 times to load the page so after try too many times page finally loads and I can surf :confused

I have Norton Antivirus and I have run Malwarebytes but nothing was found...

any other idea what could be causing this issue?
this is happening in 2 machines in fact both got infected by the same usb with that virus

thanks a lot
 

Answer:Weird "Page Load Error" after autorun.inf virus

Welcome to Major Geeks!

You need to clean the USB drive and all PCs where it was used.

Please follow the instructions in the below link and attach the requested logs when you finish these instructions.
READ & RUN ME FIRST. Malware Removal Guide

If something does not run, write down the info to explain to us later but keep on going.

Do not assume that because one step does not work that they all will not.
Notes:
If you run into problems trying to run the READ & RUN ME or any of the scans in normal boot mode. You can run steps in safe boot mode but make sure you tell us what you did later when you post logs. See the below if you do not know how to boot in safe mode:

Starting your computer in Safe mode

If you have problems downloading on the problem PC, download the tools on another PC and burn to a CD. Then copy them to the problem PC. You will have to skip getting updates if (and only if) your internet connection does not work. Yes you could use a flash drive too but flash drives are writeable and infections can spread to them.

 

1 more replies
Relevance 88.56%

Hi

I have an ASUS K72F laptop running Windows 7, and it has always worked fine with both wired and wireless connections. I recently changed Internet provider from BT to Plusnet, though I cannot be sure that this is when the problem began.

It still works fine when wired, but when I switch the wireless on and unplug the ethernet cable, it says that there is a strong connection to the network with internet access, and I am able to find the router by putting http://192.168.1.254/ into the browser, but I cannot load any Internet pages on any browser, and cannot use any other Internet apps like Skype. The wireless works fine on another laptop and on my phone - it is just on this Asus laptop.

I have tried searching for posts of various forums - but have just ended up using command prompt to ping google (it was not successful) and running a utility called winsockfix, which made no difference. I have scanned for malware and virus - I have removed a couple, but this hasn't fixed the problem.

Can anyone please help?

Thanks

Guy
 

Answer:Laptop "connected with Internet access", but cannot load web page

7 more replies
Relevance 88.15%

Hi there,

just installed IE9 and the first thing I noticed when I acess some websites is a box in the middle of the page saying " Message from webpage:"Please wait for the page to load..." it is really annoying and pops up several times if I close it or press ok

anyone knows how to disable this?

Answer:IE9 Message from webpage:"Please wait for the page to load..."

Just get a real browser. FireFox or Chrome. It's so easy!

I used to be hardcore IE user, but since IE9 came up I had to switch.
I am never comming back to IE anymore!!! (it's slow and just a poor browser)

2 more replies
Relevance 88.15%

I am operating IE6 on Windows XP with SP 2. There are certain websites that I used to frequent, that do not load up anymore. I am sent to a webpage titled "Error Page Assistant". The webpage has "DNS Error Page" listed at the top, and below is some generic version of a search engine. The following are two websites that give me this error: www.compusa.com & www.enquirer.com.

I have tried using Ad-Aware & Nortons, hoping that it might be a virus/spyware. Please let me know if there is anything else I can do. Thanks!
 

Answer:IE6 will not load certain websites: "Error Page Assistant"

6 more replies
Relevance 88.15%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

Answer:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Relevance 87.74%

When trying to update with Windows update, i get a spontaneous reboot or a bluescreen-crash.
The filename "lzx32.sys" is mentioned.

The updates i'm trying to install are the following (roughly translated from norwegian):
"Update for Windows Media Format 11 SDK for Windows XP (KB939399)"
"Windows Tool for removal of dangerous software - march 2007 (KB890830)"
Other than that, i believe i have all other windows-updates.

I do however recall there beeing a third update on the list when i started the installation for the first time.
After the third or forth spontanous restart/bluscreen, when i figured something was wrong, it has disappeared from the list.
I do not know if it actually got installed or not.

I've been following the 5-steps-before-posting as good as possible.
From my normal startup programs msn-messenger and daemon-tools were shutted down before the dss-scan.
Here are the three logs (panda-activescan, dss-main and dss-extra attached):
PS: note that the "extra.txt" is from the first scan, which was done abit earlier than my last scan where the pasted "main.txt" is from.
This is because i was unable to get a fresh "extra.txt" from the last scan (no minimized window at all).
OK, here we go now:

Incident Status Location ... Read more

Answer:Windows Update - spontaneous reboots/bluescreens "lzx32.sys" - "Exploit/ByteVerify"

BUMP

In addition I've done some work myself (Rustbfix.exe, SpywareGuard, SuperAntiSpyware Free Edition, AVG Anti-Spyware), and it seems to be cleaner than it was (i.e. Windows Update works).

It would be nice anyways to get the facts straight, so here's a fresh log from Deckards System Scanner:

Deckard's System Scanner v20070318.32
Run by Claw_ on 2007-03-22 at 14:16:44
Computer is in Normal Mode.
--------------------------------------------------------------------------------



-- HijackThis (run as Claw_.exe) -----------------------------------------------

Logfile of HijackThis v1.99.1
Scan saved at 14:17:16, on 22.03.2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16414)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Programfiler\Fellesfiler\Symantec Shared\ccProxy.exe
C:\Programfiler\Fellesfiler\Symantec Shared\ccSetMgr.exe
C:\Programfiler\Norton Internet Security\ISSVC.exe
C:\Programfiler\Fellesfiler\Symantec Shared\SNDSrvc.exe
C:\Programfiler\Fellesfiler\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Programfiler\Fellesfiler\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\Programfiler\Fellesfiler\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Programfiler\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\Programfiler\Grisoft\AVG Anti-S... Read more

5 more replies
Relevance 87.33%

So I have this weird thing happening in my relatively fresh install of Windows 10.
Whenever I search for "Check for Updates" or "Windows Update settings" on the search box of the start menu, I get the results that I want but if I press enter or try to click on those results nothing happens.. As far as I know I can click all others search results but those, and maybe others related to windows update.

I can still get updates by going to Settings>Update & Security though.

In my other computers this works fine, and as far as I can tell all the updates are done.
From what I've searched around other people seemed to have a similar issue where they couldn't acess the settings at all which isn't my case. Still I tried the sfc/ scannow that a lot of users seemed to recommend but no results.

Answer:Can't click on "Check for Updates" "Windows Update settings" on Start

Spanker,
.............. Still I tried the sfc/ scannow that a lot of users seemed to recommend but no results. .....................

Please clarify what did you mean by "no results".

When sfc /scannow is completed, it will give you one of the following 3 reports....................(paraphrasing)

1. No integrity violation.
2. Found corrupted files and repair is successful.
3. Found corrupted files but unable to repair some of them.

Which one of the above is applicable to you ?

3 more replies
Relevance 87.33%

At first I completed the download and than waited for around 3 hours for "preparing for installation" and than when i again started the updating after the restart it is showing "checking for update" from past an hour.
What should i do?

Answer:Why does windows to update stuck at "checking for updates" and "preparing for installation" ?

The OS is probably missing some updates during the upgrade process. Be patient and let the process work on its own.

2 more replies
Relevance 87.33%

So I have this weird thing happening in my relatively fresh install of Windows 10.
Whenever I search for "Check for Updates" or "Windows Update settings" on the search box of the start menu, I get the results that I want but if I press enter or try to click on those results nothing happens.. As far as I know I can click all others search results but those, and maybe others related to windows update.

I can still get updates by going to Settings>Update & Security though.

In my other computers this works fine, and as far as I can tell all the updates are done.
From what I've searched around other people seemed to have a similar issue where they couldn't acess the settings at all which isn't my case. Still I tried the sfc/ scannow that a lot of users seemed to recommend but no results.

Answer:Can't click on "Check for Updates" "Windows Update settings" on Start

Spanker,
.............. Still I tried the sfc/ scannow that a lot of users seemed to recommend but no results. .....................

Please clarify what did you mean by "no results".

When sfc /scannow is completed, it will give you one of the following 3 reports....................(paraphrasing)

1. No integrity violation.
2. Found corrupted files and repair is successful.
3. Found corrupted files but unable to repair some of them.

Which one of the above is applicable to you ?

3 more replies
Relevance 87.33%

When I try to install gears of war I reivieve this error message. "Failed to load DLL: GameuxInstallHelper"

I have tried all the below with no avail...

http://support.microsoft.com/default.aspx?scid=kb;en-us;968365&sd=rss&spid=7027
 

More replies
Relevance 87.33%

Get message "Failed to load 'installhelper.dll' into memory." while trying to install eCopy from a CD that installs fine on other PCs. eCopy has no information about this error message and nothing appears on the net. Any ideas? Have tried searching the PC and other PCs in the network for such file or instances of it in the registry. Nothing!
 

Answer:Failed to load "installhelper.dll"

Just to be sure, what OS are trying to install this software on that fails?
 

2 more replies
Relevance 86.92%

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

Answer:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Relevance 86.51%

To anyone that can help me out:

I purchased a windows anytime upgrade key and upgraded my system from windows 7 home premiuim to windows 7 ultimate now when my windows tries to update I get this: (See image titled "message")



To bring you up to speed as to what I've done so far:
I ran sfc\scannow and no errors were found
I downloaded the hotfixes and apllied them and still could not update
I tried to do a system restore to the point before I upgraded, but I could not perform one because all of my previous attempts to update windows automatically creates a system restore and all the restore points were within a 24 hour period
I installed a system update readiness tool as per "windows help and support" dialogue box

To see the updates that did not install, refer to the image titled "update"

Really, I feel like I've done my homework and I've exhausted my efforts as to how to fix this problem. I'm currently going to school for computers and so I really like to apply what I learn in real world situations, but this one has got me stumped!

I'm also attaching my checksur.log I don't understand it now and it looks like a foreign language to me, but as I progress through my information systems degree I hope one day I can become a techsupport forum partner.

Any help would be greatly appreciated!!

Thanks in advance,

Techstudent36

HERE IS MY CHECKSUR.LOG


=================================
Checking System Update Read... Read more

Answer:windows update error code "WindowsUpdate_80073712" "WindowsUpdate_dt000"

Hi have you tried running a start up repair An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

7 more replies
Relevance 86.51%

I'm not sure what this is in Windows Update [and this seems to be greyed out itself too], but how is it possible to have no results in Google on this KB that's in Windows Update?

I also clicked on the "more information" for the Microsoft Knowledge Base, but nothing came up there either.

Answer:A "non-existent" Windows update ("KB3024777") even Google can't find

Also note that it can't be unchecked/deselected.

Edit: It seems this update removes kb3004394 and vanish without a trace (except in History).
Neither seems to be available in the uninstall list afterwards.

9 more replies
Relevance 86.51%

Hello guys,

I don't know what I did, but nothing happens when I click on those two things in the search bar:

View image: wtf

I reinstalled Windows a few hours ago, and IIRC pressing those with the mouse lead somewhere. Now when I click on them, it does nothing. I have to type in "Settings", so I can click on the actual Windows App. Then I can navigate to those settings. IIRC those results were "clickable".

Can somebody help?

Thanks in advance!

Answer:Can't open "Windows Update Settings" or "Check for Updates"

Hello iamnewhere,

If you like, here's a Windows Update shortcut to use for now until hopefully an update will sort it for you.

https://www.tenforums.com/tutorials/5...dows-10-a.html

4 more replies
Relevance 86.51%

Hi.
Mikael Nilsen here.
When I try to use Windows update, I get the errorcode "WindowsUpdate_80246002" "WindowsUpdate_dt000"
I have not installed any new programs, only updated Adobe Air.
I tried to uninstall Adobe Air to check if it was the problem, but got the same errorcode, so why this came up I don`t understand.
I hope you can help me with this, as soon as possible.
Best regards
Mikael Nilsen

Answer:Windows update fails, errorcode "WindowsUpdate_80246002" "WindowsUpdate_dt000"

Hi,
Like Gary said, you could try to reset the Windows Update components as below:
How do I reset Windows Update components?
http://support.microsoft.com/kb/971058/en-usKaren Hu
TechNet Community Support

16 more replies
Relevance 86.51%

Hello guys,

I don't know what I did, but nothing happens when I click on those two things in the search bar:

View image: wtf

I reinstalled Windows a few hours ago, and IIRC pressing those with the mouse lead somewhere. Now when I click on them, it does nothing. I have to type in "Settings", so I can click on the actual Windows App. Then I can navigate to those settings. IIRC those results were "clickable".

Can somebody help?

Thanks in advance!

Answer:Can't open "Windows Update Settings" or "Check for Updates"

Hello iamnewhere,

If you like, here's a Windows Update shortcut to use for now until hopefully an update will sort it for you.

Windows Update Shortcut - Create in Windows 10

3 more replies
Relevance 86.51%

Have a new computer which runs Windows XP 2005, and it's been a bit of a rough road.

Lately when I start up the computer, the "Windows Installer" appears every time. "Please wait while Windows configures Your Sonic Update Manager." The next window that appears is Sonic Update Manager, and it says, "The feature you are trying to use is on a CD-ROM or other removable disk that is not available. Insert 'Sonic Update Manager' disk and click OK." At the bottom of this same window is 'Use Source: 1'.

When I click "OK" or "cancel," a message appears, "The path '1' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'UM.MSI' in a folder from which you can install the product Sonic UPdate Manager."

If I continue to click 'cancel,' it eventually all goes away. But it's annoying and I'd like to set things straight. How do I get this to go away???

I looked on my original invoice from Dell, and yes, they did install Sonic, but I don't have a CD for it. It may also help for you to know that this began after my ten-year-old son had me install Editing Software powered by Muvee for his Vidster video camera from Mattel. Could that have something to do with it?

Any advice would be appreciated.
 

Answer:Why do "Windows Installer" and "Sonic Update Manager" keep popping up?

Click start then run, type msconfig then press enter and click on the startup tab.

See if you have these processes listed "issch" and "isuspm". If so, uncheck them, click apply and restart the computer.

Steve
 

14 more replies
Relevance 86.1%

I'm trying under "Windows Update" to click on "check for updates" however when I do that I get message
"windows update cannot currently check for updates, because updates on this computer are controlled by your system administrator"
I am the admin on the PC however this PC points to a In-office "WSUS server" to normally get its update
Is there a work around to this that I could add to my local group policy or registry?
I have been under Group Policy Object Editor -->Computer Configuration --> Administrative Templates -->
Windows Components --> Windows Update
but seen nothing that would allow to override this error
Any suggestion(s) would be most appreciated
JMurphNE

More replies
Relevance 85.69%

Hope this query is in the right section -tried to use my LDS 1881 England Census CDs last night - but having problems with the Viewer.

I have V4 which up to now has worked perfectly - tried to re-install it
and I keep getting "Failed to extract file "Dll_ini" from binary table"
error message.

BUT no problems on my laptap which has the Viewer installed from the
same CD.

Have had a few problems with computer of late - it was in the workshop
3 weeks ago because of some corrupt Windows files - could that be the
problem?

Grateful for any advice, suggestions as to what to do!
 

More replies
Relevance 85.69%

I would like to replace the default "The page cannot load" ummmmm.... page that loads when a site is blocked or unable to load. Does anyone know how to do this?
 

Answer:Replacing "The page cannot Load" in IE6

10 more replies
Relevance 85.28%

Dear Tech Support Forum Staff and or Members,

Since my original thread: http://www.techsupportforum.com/forums/f10/concerned-about-a-delayed-write-failed-error-673492.html
is now a little old, I don't want to run the risk of bumping it unnecessarily. Since the original posting of this thread, my computer has had at least 3 more Delayed Write Failed errors, and I'm starting to wonder why. I know that people had mentioned possible problems with loose cords, or maybe even my power supply, but I don't know how to go about looking for "which cords are which". Any help with this would be greatly appreciated.
Sincerely, floppyarms

Answer:Update of the Thread "Concerned about a Delayed Write Failed error"

Hi what happened with chkdsk did you try another known good working psu

5 more replies
Relevance 85.28%

So, what do I do about this message . It's suggesting that I havea a virus, possibly Trojan, abwiz.F or possibly automatically need to download virus definition with the Intelligent Updater. My computer won't allow this and tell me that it is recommended to stop the process. The virus removal is far too complicated and I have read that folks who have done this found it didn't help the problem. I have Norton Virus protection. Thanks for any help.
 

Answer:Error:"LU1975 This update failed during its preprocessing welcome text phase"

Have you tried the AutoFix Tool?........https://www-secure.symantec.com/techsupp/asa/index.jsp

Also a removal tool if you suspect abwiz.F trojan ............http://securityresponse.symantec.com/avcenter/venc/data/trojan.abwiz.removal.tool.html
 

1 more replies
Relevance 85.28%

I still can't update windows xp home to sp2. I've gotten good suggestions here but so far they haven't solved my problem. I've done what the MS "Access is denied" KB873148 message said to do. I followed ALL its instructions to the letter. I verified that the update was failing when it tried to delete registry key HKCR\vnd.ms.radio. My setupapi.log file showed that it tried and failed to do that twice in succession before it launched into its uninstall routine.

Following KB873148, I then edited the registry (I backed it up to ...my documents... first). I changed the permissions for the vnd.ms.radio registry key that the update routine was trying to delete. I am quite certain that when I clicked File/Exit and saved the modified registry all the permissions for administrators had the "allow" check box selected for "read" and "full control".

That did NOT solve the problem. After I did all that, and reran the *.exe full file version of sp2 which I had previously downloaded, I still got the same "access is denied" error message and I still had the same message in the setupapi.log file afterward.

I'm getting WAY WAY over my head here to suggest this but it's all I can think of:

If the update routine is failing when it tries to delete that single registry key, for whatever reason, is there a way I could edit the registry manually and just delete it that way and see if that works? Assuming I've... Read more

More replies
Relevance 85.28%

I have been trying to update for a day or two now but it always reverts to the previous version in the middle and after I boot in windows I get "0xc1900101 - 0x30018 the installation failed in the first_boot phase with an error during sysprep operation"

I have tried looking around google for a solution but looks like there isn't a clear one. Anyone with the same issue, or any ideas for fixing it?

Answer:Creators update "0xc1900101 - 0x30018 the installation failed"

Enferlain,

Have you tried the following:

Update to Latest Version of Windows 10 using Update Assistant

1 more replies
Relevance 85.28%

Hi I am using Dell Latitude 3570 model laptop and some time back i found that it is affected with Intel-SA-00086 vulnerability using the Tool provided by Intel!
So as to fix it i updated the firmware release by Dell from:
www.dell.com/.../dell-client-statement-on-intel-me-txe-advisory--intel-sa-00086-
And after the updating the firmware i did re-check using intel's tool to verify if problem was fixed and got below message:
Risk Assessment
Based on the analysis performed by this tool: This system is not vulnerable. It has already been patched.For more information refer to the INTEL-SA-00086 Detection Tool Guide or the Intel Security Advisory Intel-SA-00086 at the following link: https://security-center.intel.com/advisory.aspx?intelid=INTEL-SA-00086&languageid-en-frIntel(R) Capability Licensing Service Client software is installed and healthy, but re-key has failed. Please contact your system manufacturer for support.
INTEL-SA-00086 Detection Tool
Application Version: 1.0.0.128Scan date: 27/12/2017 1:50:32
 
I want to know what caused below message to appear and what would be the effect of this on my laptop:
"Intel(R) Capability Licensing Service Client software is installed and healthy, but re-key has failed. Please contact your system manufacturer for support."

More replies
Relevance 85.28%

I have two issues, which I think are related. In the Device Manager, it shows under USB Controllers "Unknown device". "Windows has stopped this device because it has reported problems. (Code 43)"

I tried updating the driver, but the driver was correct.

I tried disabling the device.

I uninstalled the device. Windows reinstalled it at next boot, but the problem reappeared.

There is no Imaging Devices in the Device Manager.

At the same time, my webcam failed to open. Message "Webcamera initialization failed."

I downloaded the correct webcam program from Toshiba, installed it, but same result.

This all started when I uninstalled and reinstalled Skype. I have tried uninstalling it again, but still no webcam.

The webcam is enabled in the BIOS.

I really do not want to reinstall Windows.

All help appreciated.

Toshiba Satellite P500 16J
Windows 7 Ultimate x86
All updates installed

More replies
Relevance 85.28%

I just resolved an issue I had with the wireless connectivity of my Acer notebook computer and now I am getting strange error messages. When I try (not every instance) to open device manager I will get the message "Failed to open empty document." From there I will occasionally get "Parser" messages that say "Value creation failed at line 843" or "line 422." I read what I could find about these messages and it points to MMC as the cause. How do I go about fixing this annoying problem if anyone knows?
 

More replies
Relevance 84.87%

The above patch fails to install with "Error Code: 0x80070643 "
I dont have Office 2007, I have office 2010.
I did a "Find solutions" option for this and got one option



 

Office 2003 Update fails to install with error 0x80070643
Followed the directions and my OSE service is not disabled.   In manual mode.




 

Answer:Failed install on "Security Update for Microsoft Office PowerPoint 2007 (KB2596764)"

The issue can occur if third party programs affect Microsoft Update service. I suggest temporarily turnning off UAC and manually install Office update to test the
issue. Sabrina
TechNet Community Support

4 more replies
Relevance 84.87%

I've disabled automatic updates (drivers, Win updates) by making changes to Win 10. Now every entry in Update History is listed as a failed update. Of course, no update has failed; I don't want to install them yet. Is there a way to delete failed update entries?

Answer:Deleting "Failed Updates" in Update History

Hi ChriskK,





I've disabled automatic updates (drivers, Win updates) by making changes to Win 10.



Are you first able to say how you did this?

b1rd

0 more replies
Relevance 84.87%

I've disabled automatic updates (drivers, Win updates) by making changes to Win 10. Now every entry in Update History is listed as a failed update. Of course, no update has failed; I don't want to install them yet. Is there a way to delete failed update entries?

Answer:Deleting "Failed Updates" in Update History

Hi ChriskK,





I've disabled automatic updates (drivers, Win updates) by making changes to Win 10.



Are you first able to say how you did this?

b1rd

more replies
Relevance 84.87%

Is there a way to edit the log for Windows update history to remove the failed updates as in the attached jpg ?

I have solved the issue of them failing...but would like to delete these and other "failed" entries

Thanks....TRinAz

Answer:Removed "failed updates" in Win 7 update history

HI Trinaz
see this tutorial:

Windows Update - Reset
Good luck

2 more replies
Relevance 84.87%

I've disabled automatic updates (drivers, Win updates) by making changes to Win 10. Now every entry in Update History is listed as a failed update. Of course, no update has failed; I don't want to install them yet. Is there a way to delete failed update entries?

Answer:Deleting "Failed Updates" in Update History

Hi ChriskK,





I've disabled automatic updates (drivers, Win updates) by making changes to Win 10.



Are you first able to say how you did this?

b1rd

6 more replies
Relevance 84.87%

Can anyone tell me exactly what this program is for? I don't know if it came installed on my PC or if it was something downloaded inadvertantly with another program I've downloaded. It seems to take-up a great deal of space (about 70 MB!!) for something that I don't think I'm going to be using. I suppose there is a chance I might want it in the future (perhaps I could decide if I knew EXACTLY what it does) - but for right now, I don't connect any "Mobile" Device to this PC.

Can someone help?

Thanks,
g
 

Answer:Windows "Mobile Device Center" (& "Update")?

http://www.microsoft.com/windowsmobile/devicecenter.mspx
 

1 more replies
Relevance 84.87%

windows update error "WindowsUpdate_80070BC9" "WindowsUpdate_dt000"
I am using windows 7 64 bit
I cannot install any important updates and haven't been since 8/2010
 

Answer:windows update error "WindowsUpdate_80070BC9" "WindowsUpdate_dt000"

These links from Microsoft Support will help you up....
Link 1
Link 2

PLZ go through these support links and do reply if the problem is solved......
 

1 more replies
Relevance 84.87%

I've installed Build 10041 and upgrade to 10049 three times now, each time I was able to do a search for Windows Update or Sound which would show me the correct results but this time, I'm not getting the right results. In the past I would do a Reset and the search results were fine but this time I did an install.

Search examples:
< "Windows Update"
> The Windows Update app would appear in the search results.

< "Sound"
> The Sound app would appear in the search results.
Plz let me know if you have any ideas on how to fix this and/or where I can find the executables.

More replies
Relevance 84.46%

Hi, I am having a problem with my newer computer, I just got this rig a few months ago and never had a problem until last Thursday. It Blue Screened on me while I was installing ARC GIS 10.1. From then on it randomly crashes. (I have previously installed ARC GIS 10 and never had a problem.)

I keep things updated (windows and drivers) and I do think windows forced through an update earlier that day. I un installed ARC GIS 10.1 and the windows update, didn't make any difference. I have also ran the Windows Mem test and Auslogic BoostSpeed/ Registry repair. I keep getting "Bad Pool Header" and "Page In Nonpage Area" and I can't seem to find something that triggers it. So far it hasn't crashed in Safe Mode without network access. I tried it once with access and it crashed. Currently have windows checking the drives for errors ( I have 4).

I think I attached the proper dump files. This is my work computer so this is kind of causing a big problem. Thanks in advanced for the help!!

Answer:BSOD "Bad Pool Header" and "Page In Nonpage Area" Runs in Safe Mode

Welcome aboard.

The crash dump you supplied, suggests the display driver failed there.

Code:
fffff880`0c995858 fffff880`10018000Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x980000
Go to Drivers - Download NVIDIA Drivers, follow option two to search for the appropriate driver for your system automatically, and install it.
Let us know how it worked.

3 more replies
Relevance 84.46%

Whenever it is time to update Adobe Flash on my desktop I get this error message during the update process. I have to uninstall the program and then reinstall it directly through Firefox to get it to update. My laptop, which runs an Nvidia card, doesn't have this problem.

Is this normal system behavior? Is there a way to fix this so that the updates work the way they are supposed to? I have spent a lot of time researching the problem before stumbling onto this solution. But it should not be so hard to update Flash.
 

Answer:Adobe flash update: "unable to load application configuration"

The question in my mind is which version of the Flash installer the error is coming from. By that I mean, is it attempting to update Flash in Firefox or Internet Explorer? So, open this page in both Firefox and IE:

http://helpx.adobe.com/flash-player.html

Many people forget to update Flash for IE, and if that version is borked up then it may be giving you the error you're getting and whatever you do with the Firefox version doesn't matter.

As a side note, are you using or have ever attempted to use Flash on 64-bit versions of either Firefox or IE? You probably haven't, but I'm just checking.
 

4 more replies
Relevance 84.46%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 8103 Mb
Graphics Card: Intel(R) HD Graphics 3000, -1988 Mb
Hard Drives: C: Total - 476837 MB, Free - 271044 MB;
Motherboard: ASRock, Z68 Extreme3 Gen3
Antivirus: AVG Internet Security 2014, Updated and Enabled
-----------------
Problem:
My Windows 7 Professional "Explorer" tree (not Internet Explorer) no longer lists my CD/DVD ROM DRIVE under the Device Manager/Drives. It used to.

I've checked the System Registry and it has lots of info about that ATAPI drive, but my system fails to find the "cdrom" driver (which is the one Windows 7 uses by default). It's not a 3rd-party driver.

The tray on my CD/DVD drive opens and closes properly. Windows just won't recognize the drive, so I can't use it.

I'm hoping someone can offer a 'manual' solution to get it working again. I do not want to spend a month to reinstall my OS and tons of hard-to-configure software. I've read countless other posts and solutions, both here and on MS's sites. The info on MS's sites is not even understandable. It's too vague and often doesn't even apply to my situation.

Note: The error (7026) message is:
"The following boot-start or system-start driver(s) failed to load:
cdrom"

-----... Read more

Answer:Error 7026 "The following boot-start or system-start driver(s) failed to load: cdrom"

8 more replies
Relevance 84.05%

Hi all

Regarding "Failed" Driver Update: Intel - net - 10/31/2017 12:00:00 AM - 18.33.11.2

This thread seeks info about (and extending from) a driver update shown* (*Windows Settings > Update & Security > Installed Update History > Driver Updates) as "Failed to install on ‎17/‎01/‎2018 - 0x800705b4". (A timeout error).

This issue was touched-on in another, more general, thread (What to do about Failed Updates? - Windows 10 Forums), and I thank Ix07 yet again for the information there.

Following Ix07's link, I looked at the Microsoft Update Catalogue pages. Having two pages of places to download drivers from threw me a bit, but I noted they essentially had the same significant info in the title links, except for the driver models - either Intel(R) Dual Band Wireless-AC 3160, or Intel(R) Dual Band Wireless-AC 7265.

My laptop has (Settings > Network & Internet > WiFi > Hardware Properties) an Intel(R) Dual Band Wireless-AC 7260, Driver version: 18.33.11.2.

So, now to my questions. Warning! My technology knowledge and skills are - I'm not kidding - really basic. Please assume I know next-to-nothing about the hardware and software I'm asking about here.

Questions:
(1) When I check Device Manager > Network adapters > Intel(R) Dual Band Wireless-AC 7260 > Properties > General tab, I see "Location: PCI bus 3, device 0, function 0". Also "Device status: This device is working properl... Read more

Answer:Some Questions re a "Failed" Driver Update

Originally Posted by ausgumbie


(1) When I check Device Manager > Network adapters > Intel(R) Dual Band Wireless-AC 7260 > Properties > General tab, I see "Location: PCI bus 3, device 0, function 0". Also "Device status: This device is working properly." This confuses me a bit. What does the "device 0" indicate? Which "device" is working properly?



Device 0 identifies the 1st device on PCI bus 3. Function 0 identifies the 1st "function" of that device. A full explanation of these terms would fill a book (called the PCI specification).

For your 7260, it is the only device connected to bus 3, so it is device 0. And there is only one function (the network controller), which is function 0.

A single hardware device can have multiple functions. For instance, my nVidia graphics card has two: function 0 is the graphics controller, function 1 is the audio controller. As far as Windows is concerned, these are 2 different "devices" and therefore require 2 different drivers, even though they are on the same physical device.







Originally Posted by ausgumbie


(2) In Driver tab view, I see this (image):

So, do I have the driver that "didn't" update on 17/01/2018, or .......?)



It looks like it did get installed.







Originally Posted by ausgumbie


(3) In Events tab view, ... Read more

0 more replies
Relevance 84.05%

I am trying to rebuild by search index because my computer won't let me arrange items using the "Arrange By" option... However, when I try and load my indexing options to rebuild the index it will sit there and say "Waiting to receive indexing status". If I click the "Advanced" button it will freeze... I also receive an icon and loading display problem SEE PIC#1. Also when I click on "My Computer" it sometimes will sit there searching and it won't load. SEE PIC#2

I have tried the following:
1. Restarting the "Windows Search" service multiple times at different boots.
2. Deleting the files contained in the folder "C:\Windows\System32\config\TxR\". http://support.microsoft.com/kb/2484025
3. Stopping the "Windows Search" service then I opened up "regedit". I went to "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSearch, SetupCompletedSuccessfully" I changed the value from a 0 to a 1. Then I rebooted my PC. I then went back to the same key and changed it back to a 0 and rebooted my PC again.
4. Turning the "indexing service" on and off from the "Turn Windows Features on or off" menu.
5. Microsoft Fixit Indexing Troubleshooter
6. Sfc /scannow
7. Tried this hotfix http://support.microsoft.com/kb/977380
8. Tried another user account and creating a new user account
9. Tried resetting folder view to "defaults" http://www.sevenforums.com/tutorials/15692-... Read more

Answer:"My Computer" won't load, Disappearing Icons, & "Arrange By" option won't work. Help?

13 more replies
Relevance 84.05%

Hewlett-Packard
HP Pavilion dv7 Notebook PC
Intel(R) Core(TM) i7 CPU
RAM: 6 GB
64-bit Operating System

It started while i was browsing anime viewing websites on Firefox.(Both of which I've used for years.) Also note AVG's Resident Shield was online, and i don't remember going anywhere strange or downloading strange files. I had scanned used malwarebytes anti-malware the day before and found nothing.
Randomly, I received a blue screen stating something like "Client side encryption is not supported by the remote server even though it claims to"

After restarting, my computer failed to start normally.(I think it failed to load the operating system?) It went to some kind of auto repairing thing to fix itself in order to startup properly. But it failed.

Safe mode = same as above

Last Known Good Configuration = same as above

Bootlogging? Debugging? Description was it would mention at which startup file it failed to load. It loaded files from the top of my screen to almost the middle, which is about < 10 things. It failed, and without telling me any new information, did the "same as above".

3 attempts of system restore. One was more than a month ago. It would get to the end and "finish" restoring for a brief moment, then immediately show an error pointing to "...Appdata/Roaming/Firefox/(jumble of letters).profile/session(the rest was cut off, but i thought i could see half an "s") It said it couldn't replace the file?

chkds... Read more

Answer:"Client Side Encryption not supported by..." --> "computer failing to load"

Its the server that you were on, it did not like the encryption that that server was using.

4 more replies
Relevance 84.05%

I updated the title and added some info....

My computer was working fine until one day I couldn't sign in to Hotmail or Yahoo, or use Windows Update. Until a week ago I was using MSN Dial-up to access the internet, but recently switched to a wireless connection via a D-Link Wireless G Router and a USB Adapter; my homeowner has BellSouth DSL and we hooked into it. He uses Outlook to retrieve his mail on his laptop (which used a USB connection to the DSL modem until we got wireless) but we can still get onto the email servers via IE on the laptop, no problem. The PC is using the USB wireless adapter to access the internet, and the connection works fine - we can browse online all day, I can even play MMORPGs. The thing is, I can't get into any of my email. I can get the hotmail or yahoo home page but when I sign in then an error message says page unavailable check network settings, Cannot find server or DNS Error
Internet Explorer. Also when I use windows update the page freezes during the find update process with error "Windows Update encountered an error" 0x80072EE2, I think. I am sure these problems are linked. I can surf all other pages on the net without any problems. Also I can sign into hotmail with another computer without any problems using the same settings and proxy server settings from the internet provider. The only difficulties are with hotmail and yahoo sign in and windows update. I have restored all the internet settings (including security) ... Read more

More replies
Relevance 84.05%

Firefox 26.

Due to a recent Firefox update, "Find in Page" doesn't work the way it used to. In previous versions of Firefox, I would click Edit> Find and the find field would stay open for all tabs until I closed the browser.

Now, the "Find" field opens for only the active tab. "Find" must now be opened for each new tab.

I want it to stay open for all tabs as it did before this last update. I think the change took place after version 24.

Actually, it would be more desired that the "Find in Page" field stayed open at all times for all tabs any time Firefox is open, not just when I click Edit> Find.
 

Answer:Firefox update diminished function of "Find in Page"

Try this add-on https://addons.mozilla.org/en-US/firefox/addon/findbar-tweak/.
 

1 more replies
Relevance 84.05%

Sorry to bother you again, but I noted a problem with my Windows 7 computer and update log.

My "view update history" page is completely blank!! Furthermore, my windows update page states that "Updates were installed: Never"

However, if I click on my "Installed Updates" page, it clearly shows that last updates I recieved/installed was on 6/10/15 and more importantly, it shows the all the previous updates that I received are is intact.

What happened?? -- how do i get my "view update history" page to show what it had always shown before (i.e. all the updates I have received up until now??

Any help would be much appreciated?

By the way, do recommend installing all updates (important, recommended, optional) or just important vs just important and recommended...etc?

Answer:"view update history" page is completely blank!!

Did you follow this? Windows Update - Reset

9 more replies
Relevance 84.05%

Yeah... as the above mentions... There are also other processes running multiple items and some that I have never had running before. Malwarebytes has picked up 2 Trojans so far "Trojan.proxy.Bunitu" but hasn't finished the scan yet for me to do anything.

FRST finished the scan so I figured I'd go ahead and upload.

EDIT: As of now I also received a notification that if I don't pay $600 all my files will become encrypted. >.<
 

Answer:Multiple "dllhost.exe" running, and "syswow64" malicious page blocked

Helllo,

Before we begin, please note the following:

I will working be on your Malware issues, this may or may not, solve other issues you have with your machine.
The logs can take some time to research, so please be patient with me.
Stay with the topic until I tell you that your system is clean. Missing symptoms does not mean that everything is okay.
Instructions that I give are for your system only!
Please do not run any tools until requested ! The reason for this is so I know what is going on with the machine at any time. Some programs can interfere with others and hamper the recovery process.
Please perform all steps in the order received. If you can't understand something don't hesitate to ask.
Again I would like to remind you to make no further changes to your computer unless I direct you to do so. I will not help you if you do not follow my instructions.


Download Malwarebytes Anti-Rootkit to your desktop.

Double-click the icon to start the tool.
It will ask you where to extract it, then it will start.
Warning! Malwarebytes Anti-Rootkit needs to be run from an account with administrator rights.
Click in the introduction screen "next" to continue.
Click in the following screen "Update" to obtain the latest malware definitions.
Once the update is complete select "Next" and click "Scan".
When the scan is finished and no malware has been found select "Exit".
If malware was detected, make sure to check all t... Read more

5 more replies
Relevance 83.64%

Hello!

The subject says it all. We have all the
PCs in a domain. Via GPO
is "Enhanced Protected Mode"
aktivated.
Under Win 8.1.
everything works perfectly.

Update on Win10: domain user
(with roaming profiles
- but should not matter ...) are not able to open any page in IE zone "internet. If I type the URL manually and press ENTER, nothing happens. When I click on a link tp any external page on our
intranet page, two new tabs open with
the URL "res:
//ieframe.dll/acr_error.htm#,about: blank"

Intranet and Trusted Sites
(also via GPO defined) works fine (because protected mode is disabled for them by default).

By trial and error I found out that it
is the "EPM" that causes the problem.
If I switch it off, IE works again.

But why does it work
under Win8.1 and no longer
under Win10?
(BTW, when I try to start IE like this "iexplore -extoff", it opens with an empty window, stays for about ten seconds and then closes again. No error message, nothing ...)

Can anyone confirm this behavior?

Michael

More replies
Relevance 83.64%

title says it all...:

i've got word 2007, suddenly the option "update page numbers only" has disappeared. if i click "update table" symbol, it does exactly that, no options there... please help!

thanks!

nicky
 

More replies
Relevance 83.23%

Hello everyone
Recently, I'm playing Anno 1404 (also called Dawn of Discovery) in my Vista Home Basic 32bit finely until I saw the problem with the "save/load" problem. First, it saves "systematically" but, the save is corrupted to a 5kb file. Second, the game can't load the 'properlly saved' save file, and also the corrupted one also.

Few of the players had the similar problem, and someone said that making another user account works, and I tried and really worked for me. Yes, I can play this way, but all of my files and infos are saved in the Administrator account, and I don't want to switch users just to play that game

Recently I found a useful MS program, which is runas, and found how to run as another account. It asks for the account pw, and everythis was fine, but it doesn't run my game
It just closes the cmd and nothing happens. What could be this problem?
I hope Ubi gives out this fixing patch fast

Answer:Anno 1404 "save/load" problem and using "runas.exe"

Figured it out with Runasspc program (which also saves the password! )

1 more replies
Relevance 83.23%

I am having the hijacked home page problem that others are having. However, my hijacking started with the "coolwwwsearch" and then went to a "youfindall.net" page that, as described before, cannot and will not be changed to my regular homepage, "youfindall.net" is the page I'm currently stuck on. I have read some of the instructions about downloading the 'Hijack This' program for the 'coolwwwsearch' problem, is this where I start for 'youfindall.net' too? I am a novice to these forums and am quite computer stupid, but, I can follow easily understood instructions. If I do complete the 'Hijack this' instructions and save the log somewhere, (where?), how do I 'show you its contents'? Please be as basic and clear in your instructions as possible. Thanks for the help. ALF64
 

Answer:Hijacked home page-"http://youfindall.net/" & "coolwwwsearch"

16 more replies
Relevance 82.82%

Can anyone help me out here? I have 2 pc's running windows7 and both of them wont update windows7

I am also having a few problems instaling other things...Like avg, malwarebytes,microsoft windows malicious software removal virus...When i download them it always comes back as the file is corrupt.

I have managed to download HijackThis.exe and here are the results below....Any help would be appreciated.

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 16:09:38, on 19/10/2012
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v9.00 (9.00.8112.16450)
Boot mode: Normal
Running processes:
C:\Program Files (x86)\Norton Internet Security\Engine\19.9.0.9\ccSvcHst.exe
C:\Program Files (x86)\Intel\Intel Matrix Storage Manager\IAAnotif.exe
C:\Program Files (x86)\DeviceVM\Browser Configuration Utility\BCU.exe
C:\Program Files (x86)\NEC Electronics\USB 3.0 Host Controller Driver\Application\nusb3mon.exe
C:\Program Files (x86)\Common Files\InstallShield\UpdateService\issch.exe
C:\Program Files (x86)\Common Files\Java\Java Update\jusched.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Users\Obrien\Desktop\HijackThis.exe
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKC... Read more

Answer:Windows will not update "WindowsUpdate_80200053" "WindowsUpdate_dt000"

7 more replies
Relevance 82.82%

Hello Guys I need your help in my laptop Graphics error.I uninstalled my AMD graphics card recently from control panel.Now i am trying to install the drivers and i have downloaded my graphics card driver from www.amd.com .But when the drivers installing there is a error message coming that is "failed to load detection driver".Please Help Me.
My Laptop is HP Probook 445 G1.
 

Answer:AMD Graphics Driver Error "Failed To Load Detection Driver"

One more thing guys.My graphics convert into Standard VGA Graphics.
 

3 more replies
Relevance 82.82%

I don't want it on this PC, nor did I sign up to be notified when it is available, etc.

Answer:Why is PC showing "Win 10 update failed" over and over?

you should be able to go into the update control panel and choose to ignore the update.

2 more replies