Computer Support Forum

How to solve error: code : 0x80000001 ?

Question: How to solve error: code : 0x80000001 ?

I had windows 8.1 pro already but decided to make new clean installation.
I downloaded the iso from here: Creating installation media for Windows 8.1 - Windows Help
I clicked on Creating media downloaded the iso file to my hard disk and burned it to a dvd.
Then in my pc booted from the dvd in the windows setup i deleted the C: partition and created it again so i don't have any windows to restore back my mistake.
Then i continued entered my windows serial number then it collected files...On the third step it throw this error:
windows could not set the offline locale information. error code : 0x80000001
I don't have a clue what is the proeblem.
I googled some say hard disk failure some say language setup is wrong so i tried to selected uk for time...and keyboard then uk and hebrew since im in Israel.
Then i tried us . In all cases it didn't help same error.
Any ideas what is the problem ? And how to solve it ?
I'm now on my laptop i can download and burn the windows again but how do i know if the problem will not come again ?

Relevance 100%
Preferred Solution: How to solve error: code : 0x80000001 ?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: How to solve error: code : 0x80000001 ?

Check the date and time in BIOS setup, make sure it's correct. Also check the Time Zone.

8 more replies
Relevance 66.42%

I am trying to sign into my Microsoft account and it says try again later and the error code 0x80048264. I have tried a lot and it never signs me in. How do I solve the error code 0x80048264?

More replies
Relevance 66.42%

How to resolve error code W1BF3CJKC-GRMEJ1. with my Desktop PC Think center.

More replies
Relevance 66.42%

I bought my Nokia Lumia 630 recently and found a number of linked apps in the store ready to install, one of which is for music. I just get an error code 80073cf9 when I try to install it. How can I solve this as I want to listen to the music I have transferred to the phone from my PC.

Answer:How can I solve the error code when trying to install the music app?

I had that problem and had to factory restore to solve.

3 more replies
Relevance 66.42%

Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-BJD6C-K3YVH-DVQJG
Windows Product Key Hash: WFqPPaNJ0hrc3E/8MgITJa2Xf0M=
Windows Product ID: 00359-OEM-8992687-00118
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {2BCC8FD5-B365-4957-A754-C2D30410368F}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.120503-2030
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 103 Blocked VLK
Microsoft Office Enterprise 2007 - 103 Blocked VLK
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1... Read more

Answer:0xC004E003 error code ..how to solve the problem? =(

Hello acotazchot and welcome to Seven Forums.

Error Code 0xC004E003 usually occurs when product activation fails. If you were trying to activate your copy of Windows 7 you may want to try telephone support.

1. Click Start, and in the Search box type : slui.exe 4
2. Press ENTER on your Keyboard
3. Select your Country.
4. Select the Phone Activation option, and hold on for a real person.

error code: 0xC004E003 - Microsoft Community

EDIT: Please follow the diagnostic information provided by NoelDP in Post # 3.

2 more replies
Relevance 65.6%

The procedure of making sure none of the hard work of user is erased or completely wiped out of hard-drive. Hackers and other scrupulous people are always making an effort to block the flow of relevant information being stored inside the computer system or laptop. Well the users definitely hit the bottom on realizing that some technical errors are becoming the cause of failure in installing of AVG Antivirus. One who is representing this form of security features is definitely the positive signal of not just development but maintaining the total security of the concerned user?s data or other relevant information. Let?s understand Symptoms of technical error code 0xC0070643?This rise of technical error actually crashes all the series of active programs in Window. ?The user?s Personal Computer crashes when this above technical error, when running the similar form of program. ?The presence of is finally displayed. ?The operating system Windows does not respond to commands given by keyboard or mouse. On top of this pace also gets crashed out. ?The presence of this computer periodically freezes the computer system for some period of time. Now let?s understand Causes of Technical Error Code 0xc0070643: -?The user needs to make sure that none of the corrupt file or incomplete version of AVG Antivirus is being downloaded inside Computer System. ?There might be an element of corrupt files in the registry, somewhere from the recent version of AVG Internet Software... Read more

Answer:How to solve AVG install failing with Error Code: 0xC0070643

I don't understand, you give symptoms but no means for correcting them? I use AVG and have done so for many years, I sometime run into errors when installing AVG on peoples machines, and 9 times out of 10, running the AVG remover will resolve the problem, if it doesn't then I run CCleaner and its built in registry cleaner, restart, run AVG remover, restart and then install AVG without any issues.

2 more replies
Relevance 65.6%

i have windows phone nd suffering from 805a8011 error

More replies
Relevance 65.6%

I have a Windows Vista Home Premium 32 bit
Anyone know how to solve error code 490 or how to solve the problems from my CBS log below:

Checking Packages
(f) CBS Registry Error 0x80070103 Package_1_for_KB957095~31bf3856ad364e35~x86~~6.0.1.0 failed to get owner for package.
(f) CBS Registry Error 0x80070002 Package_1_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0 failed to get Visibility
(f) CBS Registry Error 0x80070103 Package_for_KB954211_client~31bf3856ad364e35~x86~~6.0.1.4 failed to get owner for package.
(f) CBS Registry Error 0x80070002 Package_for_KB954211~31bf3856ad364e35~x86~~6.0.1.4 failed to get CurrentState
(f) CBS Registry Error 0x80070002 Package_for_KB954211~31bf3856ad364e35~x86~~6.0.1.4 failed to get Visibility
(f) CBS Registry Error 0x80070002 Package_for_KB957321_client_1~31bf3856ad364e35~x86~~6.0.1.0 failed to get Visibility

Checking Component Store
(f) CSI F Mark Missing 0x00000002 f!msiexec.exe.mui x86_microsoft-windows-i..xecutable.resources_31bf3856ad364e35_6.0.6000.16386_en-us_f66a1f330310d322
(fix) CSI F Mark Missing CSI Registry Item Repaired Wrote x86_microsoft-windows-i..xecutable.resources_31bf3856ad364e35_6.0.6000.16386_en-us_f66a1f330310d322\f!msiexec.exe.mui: msiexec.exe.mui
(f) CSI Payload File Missing 0x00000000 cacls.exe x86_microsoft-windows-acluifilefoldercomtool_31bf3856ad364e35_6.0.6000.16386_none_561862ac0850... Read more

Answer:Solve MY PROBLEM!!! Can't do Windows updates...error code 490!

Can you post the full log please.

You need to go to C:Windows,Logs,CBS,CBS.Log
Right click on the CBS.log, and select copy,
Right click on your Desktop, paste,
Right click on the new CBS.log on your Desktop,Send to,Compressed (zipped) folder
On your next post click on the paperclip icon and browse to the zip file and click upload.
Close the box when done.

3 more replies
Relevance 65.19%

error code 2753 my OS widows 7

Answer:how to solve the error code 2753 in tune utilities 2012

Do you mean TuneUp Utilities 2012? Where did you get it from - did you buy it (on a disk) or download it? If you downloaded it, it may be corrupt.

3 more replies
Relevance 65.19%

whenever i am going to anything to download apps or music etc. it is always been showing that microsoft signing in is having the error code 800c0008 and nothing can be done ..plzz do help me out of this problem.

Answer:How to solve the problem of the error code at my Nokia Lumia 625 phone?

Originally Posted by Windows Central Question whenever i am going to anything to download apps or music etc. it is always been showing that microsoft signing in is having the error code 800c0008 and nothing can be done ..plzz do help me out of this problem.

2 more replies
Relevance 59.04%

I am using hp pavilion notebook 15 intel(R) Core(TM) i3-321U [email protected] HGZ
 RAM-4GB, 32bit Operating System x64 -based processor.
In my PC settings  under the activate windows online, activate step is their 
I want ask question if i click on that activate all personal  files in system will be safe mode or not and how to rectify this problem.
Plssss Give  give some suggestions.

I have another problem also in my system so many security updates and updates of microsoft corporation are installing automatically after the completion of installation my system is not responding because of overloading of all updates installed.

More replies
Relevance 54.53%

hello sirs

i am in need of assistance, when i try updating my win 7 x64bit i keep on getting " code 646 windows update encountered an unknown problem"

what should i do to fix this error

please help me

thank you

Answer:how to solve code 646

  
Quote: Originally Posted by oenone


hello sirs

i am in need of assistance, when i try updating my win 7 x64bit i keep on getting " code 646 windows update encountered an unknown problem"

what should i do to fix this error

please help me

thank you


oenone

I need more info about yours system. Was it a clean install, or an upgrade?

We could also use some info about your computer.

Ken

9 more replies
Relevance 52.89%

I have dell laptop Latitude e6410. I upgraded windows 10. All the drivers were working well . But after some times windows showed a message that "your computer memory is low", I press ok but computer shut down and when I restarted the graphics were looking bad . I look in the device manager to see the graphic driver , there was status that windows has stopped this device:code (43). I tried to install driver but invain. I re installed the windows but it is showing the same status.

Answer:Help me solve Windows 10 graphics problem (Code 43)

Today is Christmas in USA. I wish I were Santa Claus with that magic spell that would have solved the problem for you, Seriously....All the drivers were working wellIf that is so then the Device Manager would have reported no issues. Tell us how did you update the drivers after you upgraded Windows 8.1 (I assume) to Windows 10? Did you go to Dell?FYI Code 43 means Windows has stopped this device because it has reported problems.i_Xp/Vista/W7/W10 User

7 more replies
Relevance 52.89%

Hi!When I run Lenovo Solution Centre, I get result code WHD01V00I-BL7X1H. I  have tried searching for the same in a forum but could not find anything relating to it and support to repair it.Please help me. IdeaPad Z570Device: WDC WD7500BPVT-24HXZT1 - 698.64 GB

Answer:What is WHD01V00I-BL7X1H result code? And how to solve?

Atop4 wrote:Hi!When I run Lenovo Solution Centre, I get result code WHD01V00I-BL7X1H. I  have tried searching for the same in a forum but could not find anything relating to it and support to repair it.Please help me. IdeaPad Z570Device: WDC WD7500BPVT-24HXZT1 - 698.64 GBThat might be a bug in the program (this was reported). Try to update the program to the latest version. Also update your video driver. If you really want to know the interpretation of the code only Lenovo can tell you that. Codes generated are for their own consumption to aid them in their troubleshooting. But if you do not observed any undesirable operation of your unit, it is likely the bug stated above.

5 more replies
Relevance 52.48%

Operating System - Windows 7 Home Premium

My Worksheet contains the following :-

1. Cells A1 to J1 contain the successive numbers 1 to 10.

2. Cells A10 to F10 contain some of these numbers in random order- no duplicates

VBA code is required to solve the following requirements.
(i)
If the cell contents of any cell are deleted in the range A10 to F10 then the contents of the equivalent cell containing the same number in the range A1 to J1 is also deleted.
eg if number 3 is deleted in the range A10 to F10 then number 3 is also deleted in the range A1 to J1.

I would be grateful for any assistance on this matter.

Regards

Flynne
 

More replies
Relevance 50.02%

Hello all,

I have a problem with Windows Update agent on Windows 7 SP1 enterprise.
We are using Configuration Manager 1606 and Windows 7 SP1 and about 140 computers works without any problem.
On the other 10 computers I got the following error message in the windowsupdate.log:
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING:     faultstring:Fault occurred
WARNING:     ErrorCode:InvalidParameters(7)

I've tried several actions although none does any help. Here is the list of actions:
- upgrade windows update agent to the latest version
- windows update agent reset by this instructions https://support.microsoft.com/en-us/help/971058/how-do-i-reset-windows-update-components
- empty Temporary Internet files
- check the rules and blocked traffic on windows firewall and physical firewall between server and workstation vlan
- sfc /scannow

It looks like significant Windows 7 error, although reinstalling is not my option.

Thanks for any help!
GregaR

More replies
Relevance 49.2%

Ok - I'm trying to fix my friends' computer - Toshiba Satellite L455-S5975 running Windows 7 32-bit

Windows firewall is off and I need to "Update Firewall Settings". When I click use recommended settings, I get a message that says it "can't change some of your settings. Error code 0x80070424" I get the same thing when I click on "Turn Windows Firewall on or off" and "Restore Defaults"

When I click on "Advanced Settings" I get "There was an error opening the Windows Firewall with Advanced Security snap-in" followed by it "failed to load. Restart the Windows Firewall service on the computer you are managing. Error code 0x6D9."

I scanned the computer using both Avast and Microsoft Safety Scanner (full scan and took over 2 hours) - no infections or issues found

I installed all Microsoft updates and followed suggested restarts.

I ran Microsoft Fix It and I get a message that the firewall isn't running or stopped and it can't be fixed.

I have gone into services as an administrator to try and start Windows Firewall...it isn't there - not in the list of services (local)

I also used SlimDrivers to update all the drivers on the computer.

What I am not seeing is how to uninstall and reinstall Windows Firewall...any other program or hardware issue, that would seem to be the easiest solution - but I have yet to see how to do that with Windows Firewall.

I even started the computer in safe mode... Read more

Answer:Win7 Firewall won't turn on error code 0x6D9 and error code 0x80070424

What other Anti-virus was on the computer before Avast?

3 more replies
Relevance 49.2%

I have a new Toshiba L550 1C8 computer with Windows 7 64-bit.

The problem is, that I can?t burn my files on my preinstalled PIONEER DVD-RW DVRTD09A DVD-drive !

If I right-click the file and choose ?Send to E:DVD-drive? I got the error code 0X8007045D.

If I use the preinstalled Toshiba Disc Creator I got the error code 380136-24-00000000.

What?s wrong.


Ole.

Answer:Satellite L550-1C8: error code 0X8007045D and error code 380136-24-00000000

Hi,

Try removing the upper and lower filters to restore functionality.

Instructions: http://support.microsoft.com/kb/982116

2 more replies
Relevance 48.38%

Computer model: Panasonic Toughbook CF-31
OS: Windows 7 SP1
Processor: Intel Core i5-2540M CPU @ 2.60GHz 2.60GHz
RAM: 4 GB (3.89 GB usable)
System type: 64-bit

CBS Log
CBS.zip - Google Drive

I ran the SURT tool Windows6.1-KB947821-v34-x64.msu.
Ran fine, no problem.

Ran sfc /scannow
"Verification 100%"
"Windows Resource Protection could not perform the requested operation."

Also ran
Malwarebytes
JRT.exe
Adwcleaner
Hitmanpro_x64

I still get the "Windows Update Error, Error Code 80070643, Code 9C57"

Answer:Windows Update Error, Error Code 80070643, Code 9C57

Hi Qpuser,
lookin at your logs
couple of questions
Are you dual booting or have the OS on your D drive/partition.
can you also run, in following order

http://www.sysnative.com/niemiro/apps/SFCFix.exe
http://go.microsoft.com/fwlink/?LinkID=52012
and sfc /scannow

copy/paste the results please.

Roy

1 more replies
Relevance 47.15%

This is a desktop PC with Windows 7 Ultimate 64 bit installed. I'm trying to repair with the disk it was installed with originally. The reason for attempting the repair is that the System File Checker says there are files that it could not repair when I ran it. I ran it originally because I couldn't install or uninstall anything. I would get an error: This application was unable to start correctly. With error message (0xC0000006)

Now trying to repair Windows 7 with the upgrade option I get:
Windows was unable to create a required installation folder. Please reconfigure your boot.wim to use the flag 9 settings for the first image and restart your installation. Error Code: 0x803002f

Any help greatly appreciated....

Answer:Started with error code 0xC0000006 and now I have Error Code: 0x803002

You may need to attempt SFC up to 3 times to repair damaged System Files. But first disinfect per Troubleshooting Steps for Windows 7. If there is any problem go with the bootable scans in Troubleshooting Windows 7 Failure to Start as the OS may be in the death grip of infection.

Then SFC may run better from the Win7 installation media or System Repair Disk Command Line: SFC /SCANNOW Run in Command Prompt at Boot.

If these fail then you can try the Repair Install after establishing a Clean Boot per Troubleshooting Steps for Windows 7.

But you may be better off copying out your files to quarantine to follow these same steps for a perfect Clean Reinstall - Factory OEM Windows 7 which compiles everything that works best in tens of thousands of installs we've helped with here.

1 more replies
Relevance 47.15%

Boot configuration data file is missing some required informationFile   BCDError Code oxc000000d Any fixes for this? Computer wont start up. Worked fine this morning. Got this message this afternoon.













Solved!

Go to Solution.

Answer:Error code oxc000000d acer aspire R14 error code o...

First of all try to check if ALT+F10 at boot take you to windows recovery and you can reach command prompt from there:troubleshoot-advanced options- command prompt (if this works, go to point 4, if not point 1)1. create a vanilla Windows 8.1 installation media from this link:http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media2. Once you boot using the Windows installation disc, on the Windows 8.x installation window, click on Repair your computer.3. Click on Troubleshoot and in the Advanced options. First thing you may try is the Automatic Repair.4. If that does not help, then select Command Prompt. Enter the following four commands into the prompt.bootrec /fixmbrbootrec /fixbootbootrec /scanosbootrec /rebuildbcdOnce the command completes, restart the computer.

3 more replies
Relevance 47.15%

Boot configuration data file is missing some required informationFile   BCDError Code oxc000000d Any fixes for this? Computer wont start up. Worked fine this morning. Got this message this afternoon.










Solved!
Go to Solution.

Answer:Error code oxc000000d acer aspire R14 error code o...

First of all try to check if ALT+F10 at boot take you to windows recovery and you can reach command prompt from there:troubleshoot-advanced options- command prompt (if this works, go to point 4, if not point 1)1. create a vanilla Windows 8.1 installation media from this link:http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media2. Once you boot using the Windows installation disc, on the Windows 8.x installation window, click on Repair your computer.3. Click on Troubleshoot and in the Advanced options. First thing you may try is the Automatic Repair.4. If that does not help, then select Command Prompt. Enter the following four commands into the prompt.bootrec /fixmbrbootrec /fixbootbootrec /scanosbootrec /rebuildbcdOnce the command completes, restart the computer.

3 more replies
Relevance 47.15%

No-one replied to this post and so the problem was never fixed.
(The updates continued to fail downloading or installing)
I upgraded to Windows 10 Home and thankfully didn't need to have the updates installed to upgrade.

Back in April this year I downloaded two important updates:

1) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3023222)

2) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3032663)

However during the installation I encountered Error Code: 80073712
I tryed the installation again without anything else open and still the same result
I tryed the installation again having restarted and still the same result
I tryed the installation again after running the DISM Tool and still the same result

Yesterday (17/7/15) I tryed to download another important update:

1) Security Update for Windows 8.1 for x64-based Systems (KB3004365)

However during the download I encountered Error Code: 800F081F
I tryed everything that I tryed previously and still the same result

I searched around and both of these error codes apparently mean that a file needed by Windows Update is either damaged or missing

I thought I might as-well start a thread about it on these forums as not being able to download/install security updates isn't a good thing

Please Reply!

More replies
Relevance 47.15%

Hi All,
I'm new here and I think I messed up the post that I made. I had meant to say that all of a sudden I can't use windows installer service I get error code 8007641 or error code 641. I'm unsure why I'm not able to use windows installer anymore and I'm not able to get valuable updates from windows without it. Has anyone else ever had this problem and if so, were they able to come up with a solution? Thank you. This is my first day on the site and unsure how to get around on it, but it seems like it's an exciting site and I'm looking forward to using it.
Thanks,
Miket797

Answer:Windows Installer, Error Code 8007641 or error code 641

DownloadmsiserverLaunch it,click YESRestart the PC and try to updateIf you still have issuesDownloadmini toolboxCheckmark following boxes: List last 10 Event Viewer log List Installed ProgramsClick Go and post the result.

2 more replies
Relevance 45.92%
Question: Help Solve error

so i installed win7 rtm, launched it, it detected something and asked for reboot, i've rebooted and, when i log in i dont see anything but wallpaper, just wallpaper, no START menu or anything, when i'm logging in Safe Mode, i can see start menu, etc, how can i solve this issue

Answer:Help Solve error

Not sure. What happens when you right click on the desktop (wallpaper)? Can you tell what screen resolution has been set to?

2 more replies
Relevance 45.92%
Relevance 45.92%

I installed "HTC Home" desktop gadget in my PC then windows error reporting shows this error. How do i solve this error.
"Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: update.exe
Problem Signature 02: 2.0.9.0
Problem Signature 03: 4de78899
Problem Signature 04: System.Xml
Problem Signature 05: 4.0.0.0
Problem Signature 06: 4ba1dfec
Problem Signature 07: 710
Problem Signature 08: 27
Problem Signature 09: System.Xml.XmlException
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
"

Answer:How to solve this error?

Please help me! I face this error every time when i start my PC.

1 more replies
Relevance 45.92%

Error -107 when loading url https://www.staysure.co.uk/travel-i...This is the message I get when I try to go into various sites.Please can you tell me how to solve it.Thank youJeannine

Answer:How to solve error 107.

URL worked fine on my Win 10. What browser are you using and is it the same on alternatives?Please give the full error message off the screen (I was unable to find any reference to it).Always pop back and let us know the outcome - thanks

2 more replies
Relevance 45.92%

RM1090_02074.00000.15234.28006_RETAIL_prod_signed_1001_025CA7_000-IN.ffu

Answer:How to solve this Error?

That's not an error, that's an image file for a Lumia 535.

more replies
Relevance 45.92%

I am unable to install Tweak UI(MS power toy),because when i attempt to do so the message appeare and says:"The produce entry point GetllDirectoryW could not be located in the dynamic link library KERNEL32.dll."

please some1 guide me to solve this problem.

Thanks in adavance.

Answer:How can i solve this error!!??

in the run box type
sfc /scannow
and press enter

10 more replies
Relevance 45.51%

I'm using a Lumia 520.Synchronisation with Exchange is not possible and I got this erre number

Answer:How do I solve the error 85010004?

The first thing to check is whether your device is set to the correct date and time. Is that so?

2 more replies
Relevance 45.51%

https://docs.google.com/file/d/0BziMjhKC5sVTZmZpQnh2NUtkSm8/edit?usp=docslist_apiThis is the link to the photo













Solved!

Go to Solution.

Answer:What is the watchdog error and is there a way to solve it ?

A watchdog is a piece of code in Windows that measures the execution time of commands. If a critical command takes too long to execute, Windows will generate this code. It is generally caused by hardware-related issues with critical components such as an SSD or core drivers.
 
Are you up to date with all of your system's drivers?
 
support.lenovo.com/en/products

2 more replies
Relevance 45.51%

When i press ctrl+f in Internet Explorer, and type some thing i get an error, I posted a screenshot of it. Does anyone know what might be causing this?
 

Answer:[Solve] IE Search Error.

10 more replies
Relevance 45.51%

Error caused by a device driver

Thank you for sending an error report to Microsoft.

Error report summary

Error type : Windows stop error (A message appears on a blue screen with error code information)
Solution available? : No (see Next steps)
What does this error mean? : Windows has encountered an error from which it cannot recover and needs to restart
Cause : Unknown device driver
Computer symptoms : A message appears on a blue screen with error code information (for example: e.g. 0x0000001E, KMODE_EXCEPTION_NOT_HANDLED)
Additional steps for you to take : Important: Please continue to send error reports so analysts at Microsoft can study and try to correct the problem as quickly as possible

Information about this error

You received this message because a device driver installed on your computer caused the Windows operating system to stop unexpectedly. This type of error is referred to as a "stop error." A stop error requires you to restart your computer.

Next steps

We have analyzed your error report and at this time are unable to determine the exact cause of the error. However, Microsoft will continue to analyze this error report to try to determine the specific cause of the error. If we are able to find the cause and correct it, and you encounter the same problem, you will receive an updated response that includes instructions for resolving the problem.
 

Answer:Any ideas to solve this error?

Did you change anything before that error started occuring? Such as new hardware etc?

Regards,

Korrupt
 

3 more replies
Relevance 45.51%

Hi

Genuine windows error keeps popping up and I can't figure how to solve. Copy of diagnostics below. Any step by step help would be greatly appreciated, as Microsoft's solution is to buy another activation code it seems!


Code:

Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0x8004FE21
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-WJ2H8-R6B6D-7QJB7
Windows Product Key Hash: ckKNc+BBPDWmo1LUlOkraNjlQ34=
Windows Product ID: 00359-OEM-8992687-00006
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {B839CF76-018F-48B7-877A-3C5732677C7E}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.140303-2144
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 100 Genuine
Mi... Read more

Answer:Can anybody help me solve 0x8004fe21 error

If KB3004394 is installed - uninstall it, reboot twice, then post a new MGADiag report
...note that Windows Update will then detect a new version of KB3004394 to be installed - this should not cause problems.

9 more replies
Relevance 45.51%

Hii, my new phone nokia lumia 535 windows store any on app download error are 80070490 how to solove??????????????

Answer:How do I solve the error 80070490?

See my reply over here: http://forums.windowscentral.com/ask...oad-error.html

6 more replies
Relevance 45.51%

win10 builds 10856 suddenly reloads many times and give me various messages about errors IRQL_NOT_LESS_OR_EQUAL, then another time video_shedullar_internal_errors, 3-d Prodess_initualisation_failed, 4- 0x000021a, 5 - critical_process_died_ 6 - system_process_misuse. How can I solved all these problems. Thank you very much for Your work. Nikolai Skorokhodov. Russia

Answer:IRQL_NOT_LESS_OR_EQUAL - what does this error and how do I solve it?

Can you please join and provide the more information on what you were you trying to update (Presuming you were trying to install TH2 / Fall Update) i.e desktop, tablet, all in one, laptop etc

5 more replies
Relevance 45.51%
Question: Solve Backup Error

Using Backup & Restore, this is the third night I got backup errors (red X), but the first time I saw the message.

"Backup failed on shadow copy on source volume got deleted. Might be caused by high write activity on the volume.
retry backup.. Consider increasing shadow copy storage using VSSADMIN resize shadow storage command.
Error code 0x80780169."

Retrying will be futile. Somebody suggested increasing the volume to 15%. There is very little information online.
Any suggestions? Should I increase the volume? I have never gotten this message in the years that I have been using Backup & Restore.

I am just supposed to be backing up my files; not creating an image, unless it copies to the disk regardless of what I choose to send to external drive.

In Event Viewer there were at least a half-dozen messages that the oldest volume was deleted. According to "Manage your space," I think I have one image on the drive and another image in backup, but I don't know if I can trust the info.

Thank you.

More replies
Relevance 45.51%

please sir,reply me that the way of how to solve run-time error 339. thanks

Answer:How to solve run - time error 339

... click here for fix explanation.... (do'nt download anything!).... Posting is provided "AS IS" with no warrantieshttp://img692.imageshack.us/img692/...Grrrr... ...im

2 more replies
Relevance 45.51%

my msn can't sign in 2 weeks im trying sending error 800488fe plz help me solve that issue

Answer:how to solve msn error 800488fe plz

http://windowslivehelp.com/solution...

2 more replies
Relevance 45.51%

every time i click on games the error code comes up and only relates to games not installed. solitaire and 4 others are installed but the others are not.

Answer:How do I solve error code0X80072EFF?

Hi - I don't know what device or OS you are using (always better to add that info in your question).
HOWEVER - when I searched this in Bing, it looks like you might have a pretty bad virus. This link is where I found the information and has a few options for you:Error Code: 0X80072EFF - Microsoft Community
Good luck!

2 more replies
Relevance 45.51%

how to solve error 711 suddenly my net off help me. I watch many videos on youtube but its not get successful ive me solution

Answer:tell me all types to solve this error

http://windows-exe-errors.com/fix-e...

8 more replies
Relevance 45.51%

need settup.hlp to run excel

Answer:how to solve error 1706 ?

First hit on Google:http://support.microsoft.com/kb/297834Second hit on Google:http://support.microsoft.com/kb/253768MIKEhttp://www.skeptic.com/

2 more replies
Relevance 45.51%

windows boot managerSystem failed to start. Recent hardware or software change might be the cause.Then I get three options. But it keeps returningg me to this screen. Please help. Thank You

Answer:How do I solve the startup error?

1- are those the messages you get? 2- Did you try the repair my computer option and then use start-up repair?If you don't have a restoration disc you can download and make one at the following address:http://neosmart.net/blog/2008/windo...Some HELP in posting on Computing.net plus free progs and instructions Cheers

2 more replies
Relevance 45.51%

been waiting for almost a week for a code to verify my account and i still haven't received it till now

Answer:how to solve error 800488fe?

Allow me to be the first to ask....What are you talking about?

4 more replies
Relevance 45.51%

Okay i really dont know how to solve this issue, it happens today and since then whatever i do (restarting or shut down my pc) nothing helps...
i cannot login to win 7... i can right click and refresh but i cannot open any application... when i open My Computer... the loading takes forever... can somebody help solve this?

I tried to do what this web suggests :

Fix for COM Surrogate Has Stopped Working Error in Vista - How-To Geek

but i cannot go to the advance setting area... it just takes all forever... its like the explorer is crashing... please help on how to solve this? i dont want to format or anything... and i dont know what is wrong... basically i just browsing media files while the error occurs for the first time please i need immediate help...

Answer:please help to solve COM SURROGATE error

Do the following steps.Get to the Advanced Boot Options screen.
Start the computer in Safe Mode.
Troubleshoot Application Conflicts by Performing a Clean Startup.
Restart in normal mode and see if there is an improvement.

9 more replies
Relevance 45.51%

i have made the TSF_Vista_Support.zip file please take a look on it and help me

i have :

processor of 2.4 core 2 due

1.5 GB of ram

ATI HD4650

Answer:please help me to solve BSOD error

These are STOP 0x124 errors - which are generated by the CPU and then reported to Windows. Not very easy to read.

That being said, they are most often related to hardware failures or compatibility issues.
Have you run the Windows Vista Upgrade Advisor (free here: http://www.microsoft.com/windows/win...e-advisor.aspx ) to see if that's an issue?

Have you added any new hardware/software recently that might be causing a problem?

5 more replies
Relevance 45.51%

I get this error and i don't know how to solve!! pls help!
Say if you need more information ...

Win 7 64Bit -> installed on SATA HDD
I tried to install Win 8 64Bit on an IDE HDD which is also in my pc
greets.mowh

Answer:I get this error in VirtualBox and i don't know how to solve

I had this error too. Try deleting the virtual machine and then rebuilding it, using a static drive instead of Dynamic. I allocated 20gb and the issue went away.

1 more replies
Relevance 45.51%

I trying to solve this MS exchange server error but i can solve it. i want to repair my EDB file form exchange server because it is very useful for me. view the problem it here:



So please give any solution for this type of problem....!
 

More replies
Relevance 45.51%

whenever i open my system a message box is appearing in the desktop showing"Cannot find script host,cannot find c\windows\winsys64.vbs".I am very much frustrated by this.So please post a solution immediately.

Answer:request to solve error

whenever i open my system a message box is appearing in the desktop showing"Cannot find script host,cannot find c\windows\winsys64.vbs".I am very much frustrated by this.So please post a solution immediately.

3 more replies
Relevance 45.51%

Hi all,I have bought a game called Warcraft III a while ago. It worked on my former computer, which was a Windows XP Professional Home Edition.Now, this pc was taken by my dad and now I have to work with this Windows XP professional. (Not a home edition and it's a laptop).I tried to install the game again. It worked. Now I tried to run, but everytime it's about to load the main menu, it crashes and following error appears :Now, is there any way to solve this? If so, how?And what does the error means to by the way?Would appreciate help.Cheerz,Baldir

Answer:Annoying Error? How to solve? (if possible)

Is the game downloaded?

10 more replies
Relevance 45.1%

 Product Name: HP ENVY 15-j059nr Quad Edition Notebook PCOperating System: Microsoft Windows 10 (64-bit)Excused me!I have forgotten my ENVY 15's BIOS administrator password.This is the code it shows after 3 times of typing the wrong password:18874377 Could you give me the reset code for this, please?Thanks in advanced.

More replies
Relevance 45.1%

Hello and good morning, I having problems with bsod mostly while playing league of legends but can occur randomly at other times. I have done memtest86, scanned the hard drive, and even took it to pcdirect where there installed a new motherboard but the problem has persisted. Thank you very much for your time.

Just an update a new bsod happened while running the repair option on league of legends.

Answer:BSOD PLaying League of Legends error code 0x0000001e a common code

Hi,

Your Nividia drivers and Nforce networking drivers are causing issues, also some USB issues.


Code:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff80002e80b05, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )
Followup: MachineOwner
---------
2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
KMODE_EXCEPTION_NOT_HANDLED (1e)
Driver Issues:


Code:

Driver: nvlddmkm.sys
Dated: Fri Jun 21 10:06:16 2013
Refers to: Nvidia video drivers.
As you have the latest driver installed, I would suggest Rolling back to the previous version.
If that does not fix the issue, then you may try this newer BETA version


C... Read more

9 more replies
Relevance 45.1%

After poking around on other threads, there's a chance this is related to the hardware drivers. However, I wasn't able to find a thread with this exact error code, so any help on what this means and how to correct it would be appreciated thanks! This is generating on a LENOVO ideapad Y700 series laptop (15 inch).













Solved!

Go to Solution.

Answer:ERROR CODE AFTER A HARDWARE SCAN, RESULT CODE: WVC007002-UM7YSI

Update your Intel Video driver and the false error from LSC should disappear.WVC007002-UM7YSIw=windowsvc=video cardtest 007result code 002um7ysi is a hash code of the serial number of your machine and useless info<unless you chose to send feeback info to Lenovo

1 more replies
Relevance 45.1%

Hi guys, first time posting so apologies in advance if I do something illegal. As far as I can gather, I should be posting in the right forum. I've been having system stability problems for the last week or so. I think it might be because of a mass driver update across my system since nothing else seems to be the cause.

Basically, I updated some drivers bout a week ago and now the PC either hangs or auto-restart when I'm playing games. At first I thought it might be due to OC instability, so I reset my bios to default settings. Didn't quite work out completely as the system still exhibits the "sudden death" during gaming.

Have tried the steps in the sticky above on refreshing the page file. defragging etc. Problem still hasn't gone away. All rams have cleared 7 cycles of memtest at 2.65 volts and 2.6 volts without problems, though everything has been reset to stock already.

My system specs are as follows :
AMD 64X2 4200+
MSI K8N Neo 4 Platinum
2 x 512mb Kingston CH5 PC3200 DDR
2 x 512mb Mushkin Black Line BH5 DDR
Inno 6600GT 128mb
Creative Audugy ZS Platinum
BenQ 1640
Gigabyte CD-RW
Hitachi/IBM 80GB SATA II
Western Digital 240GB SATA HD
Verudium Vortex 430W

Am fairly sure its not a power issue and the core temp never exceeds 49 degrees even at full load. Its about 44/45 idle. Am guessing it might be the soundcard though... Anyone able to help?

Would be most grateful for any assistance and thanks in advance.
... Read more

Answer:system error code Error code 100000d1

Looks like NV4mini.sys is the Nvidia faulting driver... Your Inno 6800GT drivers are at fault
 

4 more replies
Relevance 45.1%

Greetings, I need help solving the error codes below. Thank you

Product: Windows Defender -- Error 1923. Service 'Windows Defender' (WinDefend) could not be installed. Verify that you have sufficient privileges to install system services.

Product: Microsoft Office Enterprise 2007 - Update 'Security Update for Microsoft Office Word 2007 (KB2251419)' could not be installed. Error code 1603. Additional information is available in the log file C:\DOCUME~1\user\LOCALS~1\Temp\MSIfb8e4.LOG.

I hope I have provide useful information to get your help.

Sincerely

Answer:Error code 1923 and Error code 1603

hi, got a questions for ya. have you uninstalled any virus protection software lately? the reason i ask it might of left remnants behind if you did not use the removal tool.

1 more replies
Relevance 45.1%

Hi,can you please help me solve this problem? I've been having problems with my internet connection (works fine on other devices). It takes a lot of time to get started with the connection - it's very slow in the beginning... Thank you!! 

Answer:Lenovo B50-70 hardware scan shows this error code - Result code: WWF00F008-HK0X2L

Hi MacKapu ,
 
Welcome to Lenovo Community.
 
The error code does match possible issue with the Wifi  based on code Windows: Wifi:00F(test)008(result) 
 
Such code thou would be best interpreted by Lenovo tech support team using their tool and your Serial number.
 
It would be best to give them a call for the code 008 (WWF00F008-HK0X2L) result and likewise would be able to advise how to proceed just in case that the WLAN card itself have hardware issue based on the test. 
 
Especially if you have already tried uninstalling and reinstaling drivers for the WLAN card , maximize performance by turning off power management WLAN property and setting to highest on roaming tendency  or even doing complete factory reset aka OKR (everything wiped out but restored to out of the box setting )  . 
 
Note:  
highlights to link  available for further reference
 
Please get back to us on how things would go . 
 
Regards ,

1 more replies
Relevance 45.1%

i m using window xp sp-2..suddenly at the running time my pc stopped..n now not working..m trying to format it...but when i m trying for format and press enter for format it just restart the pc..so i dnt knw wat should i do..??

Answer:how to solve window xp formatting error...

See response 2 in this - try cleaning the contacts on the ram modules, and making sure the modules are properly seated:http://www.computing.net/hardware/w...For a laptop, or netbook, you must remove both its main battery and AC adapter before you do that.For a brand name computer, see the Owner's or User's manual if you need to - how to remove or replace the ram is usually in that - it may already be in your installed programs. If you can't get into Windows, it may be on a disk that came with the computer, or you can go online and look at it or download it - it's in the downloads for your specific model. For a generic desktop computer, see the mboard manual if you need to - how to remove or replace the ram is usually in that. ......Check your hard drive with the manufacturer's diagnostics.See the latter part of response 1 in this:http://www.computing.net/windows95/...If you don't have a floppy drive, you can get a CD image diagnostic utility from most hard drive manufacturer's web sites, but obviously you would need to make a burned CD, preferably a CD-R for best compatibility, on another computer if you need to.E.g.Seagate's Seatools will test any brand of hard drive.Do the long test. http://www.seagate.com/ww/v/index.j...The bootable Dos versions of SeaTools can be used even if Windows is not working properly.If the hard drive itself tests okay, any data problems found can be fixed, one way or another.........If the hard drive itself tests okay.........Re-installing Windows... Read more

2 more replies
Relevance 45.1%

during installation of xp, a error with blue screen occured

Answer:how to solve blue screen error in xp during f

Yes well what was the error code & message ?

2 more replies
Relevance 45.1%

Guys,

I'm a newbie here- excuse me if I don't know all the protocols around here, I'll try to pick them up quickly.

Anyway- here are the details on my PC:

Compaq Presario 5WV280
900 mhz AMD athlon
Windows ME

256 MB RAM
30 GB HD
56k modem

Machine is pretty much as setup from Compaq, except we added 128MB RAM a couple of weeks ago for a total of 256 MB- no problems after that install. We also recently replaced the modem, the original modem died and it was replaced with a Diamond multimedia Supramax 56i PCI that my brother gave me. No problems with that after we got it installed + running.
The problem came up about a week after the modem replacement + RAM install.


I am using Netzero Dialup as my ISP.

The problem I am having is this. My PC is in (what I think is) Safe mode- low resolution display, giving me Error 24 "Display driver error". It tells me that I need to reinstall the display driver, or install an upgraded driver, because the current driver is either damaged or not correctly installed. It then prompts me to the "Installation wizard" to find a better driver- but when I go thru that procedure, it says I already have the best driver installed.

When I try to remove the display driver (thinking it might work to remove + then reinstall), it begins to go thru the process, then the system freezes- every time. I tried the HP/Compaq online tech chat, but they were not very helpful- everything they suggest... Read more

Answer:Display error 24 - unable to solve...

What video card is in the machine? What have you tried? A typical test would be to remove the modem and ram again to see if that works. Optionally, theres a slim chance the video card went bad. If its onboard and using shared memory, I would suspect the ram. If its not onboard, maybe try another card. Problems like this require trial and error of removing hardware until you can narrow down the culprit.
 

5 more replies
Relevance 45.1%

Hi,
this error just came up this morning after I removed delta-search from both of my browsers,Internet Explorer and Google Chrome using adwcleaner. The problem start right after I run Malwarebytes. The whole desktop is not responding after an hour and I get blackscreen whenever I logon to my account. I solve this blackscreen problem by the help of this thread, http://http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/safe-mode-works-but-i-cant-log-on-to-the-normal/6e877026-3f55-4ca0-a458-aecdea54926e .

The only services that is being disabled is shown in this picture:

After I solved the blackscreen problem, I get this error which said:
[*]"There was a Problem Starting C:\ProgramData\Malwarebytes'anti malware\cleanup.dll"
[*]"The specified module could not be found"

And I click 'Okay'.

Whenever I enable the MBAM services, I always get this 'blackscreen'. Any idea on fixing it?

P.S Sorry for my bad grammar

Answer:How do I solve missing 'cleanup.dll' error ?

Nio,

Please do the following...

Download the Farbar Recovery Scan Tool
Select the 64-bit version.

Save to the Desktop. Double-click the downloaded file to run it.
When the tool opens click Yes to disclaimer.
Press the Scan button.
FRST64 makes a log (FRST.txt) in the same directory from which the tool is run (Desktop).
Please provide the FRST.txt in your reply. <<---


The first time the tool is run, it also makes another log: Addition.txt
Also post the Addition.txt in your reply. <<---

9 more replies
Relevance 45.1%

hi..
I installed first time the simulator and open it first time and i got following error.

Problem signature:
Problem Event Name: APPCRASH
Application Name: cpnmld.exe
Application Version: 0.0.0.0
Application Timestamp: 3ffe766e
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7600.16385
Fault Module Timestamp: 4a5bdadb
Exception Code: c0000005
Exception Offset: 00057a79
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional Information 1: baac
Additional Information 2: baac5f0a4a5b74a99058c19ace5d60ae
Additional Information 3: f5d7
Additional Information 4: f5d7d7ee9503e472a0cc9d8559dae5dc


please provide the solution so i can move ahead in my work..

Waiting for the answers.

Thanks in advance...

Answer:How to solve application crash error?

hello...
i found this article.
Install CPN Tools
and Use cardinfo for Windows
and i don't know this program is compatible with win7 or not. because i don't use it.
hope can help.

2 more replies
Relevance 45.1%

I am Using Windows 7 Ultimate

When ever i play games my Pc get a blue screen and reboots and tells me windows have recovered from an unexpeted shutdown and gives me this error message grrrrr

I already have formated and reloaded my pc 4 times then, I downloaded windows 7 sound driver for my mother board and graphics card and it still does the same, so I downloaded drivers for Vista and still the same result, I did test my hardware they are all working and not over heating and my windows is updated so, I am out of options please advice me what to do

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057
Additional information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 866D0024
BCP3: B62C4000
BCP4: 00000135
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\102809-20421-01.dmp
C:\Users\Terran\AppData\Local\Temp\WER-31718-0.sysdata.xml

Answer:How can i solve this blue screen error ?

Please zip up the contents of the C:\Windows\Minidump folder and upload/attach the .zip file with your next post.

A STOP 0x124 error is an error that's identified by your hardware - which then notifies Windows about it. In most cases it's a hardware failure or an incompatibility.

So:
- check to ensure that your BIOS and drivers are updated to the latest versions
- if you've been inside the case recently - go back in and reseat everything (I got a STOP 0x124 because of this yesterday).
- Run the Windows 7 upgrade advisor to see if it pinpoints any possible compatibilty errors (free from here: http://www.microsoft.com/downloads/d...displayLang=en

The memory dump file(s) will be used to see if there's any other issues, and to see what older drivers are loaded when the crash occurs.

9 more replies
Relevance 45.1%

I got this laptop for Christmas and it worked fine. Then i ran a Virus Scan (McAfee, It came with it), Then I shutdown the computer and went to sleep. When I got up I turned it back on and it started up, then it loaded the login screen and says "Incorrect Password" and whatnot. So I clicked OK and tried to login with my password and it doesn't work. I tried several other passwords and no password, But nothing worked. I Also tried Safemode, But it does the same thing. I tried Ophcrack, It just says there is no password.

Please, Someone help me solve this problem without having to lose any data.

Answer:Please help solve! Windows 7 Login Error.

Welcome to Seven Forums

Offline NT Password & Registry Editor

Download the bootdisk on that page from another computer and burn it to a disk.Use the likes of image burn-poweriso or Nero,burn as an image file,not data.
Run it from your computer (make sure boot from cd is allowed from within your BIOS)
Follow the instructions on the website given above and on the disc.

Dan

9 more replies
Relevance 45.1%

When I am surfing the web or watching a film, my computer may place still and do not reply without any indicates. It may revolve into blue screen in seconds if I click or press buttons repeatedly. So, what can I do to prevent computer go blue screen or what is the finest method to improve my computer performance in minutes?

Answer:How to solve a blue screen error?

This program will work out the problem & then provide links to possible fixes.WhoCrashedhttp://www.softpedia.com/get/System...http://www.softpedia.com/progScreen...http://www.resplendence.com/main

3 more replies
Relevance 45.1%

Hey guys,

like 6 hours ago ....I recently got this message :

This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator.

this came up when I was trying to go into any folder on my desktop .....my documents......and any other folders I have. I can go into My Computer but when I can there I cant get into my documents or my C Drive where I have alot of important stuff which I really need to get into asap.


I was searching through forums on google ......for this type of situation....I found alot of people with the same problem..,....the one I heard that would work is using FixPolicies.exe........but the problem is when I use that I can install it and everything ....but I cant seem to open the folder .....and that Restriction message comes up again when I try to open the folder ....soooo I really dont know what to do......I must figure a way to get into my documents...

Im running on Windows XP ...and yes I am the system adminstator as well...I have scanned my computer ....I had 5 trojans detected.....they have been removed.......

Any HELP!!! would be Great..ASAP ...... ..im in a total jam right now.. ..I hope I dont lose any of the files im my documents.

Answer:Impossible Restriction Error - Need Help How to Solve

Hi studyhard4life and welcome to TSF !

Your restriction issues are probably caused by the trojans or by the fact that you removed them. An antivirus will detect and quarantine infected files but it won't revert the changes those files made to your system. A malware infection rarely comes alone so there are probably remnants or other malwares on your system.

Please follow these 5 steps and read the instructions carefully :
http://www.techsupportforum.com/secu...oval-help.html
Post and attach your final logs in a new thread in the HJT section. Be patient as that section is very busy, the security analysts will get back to you with specific instructions as soon as they'll have reviewed your logs.

1 more replies
Relevance 45.1%

When i try to login on my gmail i get an error msg as: cannot find 'file://c:/users/user/documents/my google.html' and the when i press enter twice i am able to login .Can anyone tell me the reason and solution or the same!

Answer:how to solve gmail login error

Ask the experts here: http://mail.google.com/support/

4 more replies
Relevance 45.1%

A runtime error is a software or hardware problem that prevents a program from working correctly. Runtime errors might cause you to lose information in the file you're working on, cause errors in the file (corrupt the file) so you can't work with it, or prevent you from using a feature. Unlike stop errors, runtime errors don't typically cause Windows or a program to stop working.
Runtime errors can occur if you are running two software programs that aren't compatible, if your computer has memory problems, or if the computer has been infected with malicious software. If a runtime error keeps occurring, follow these steps:
1. Install the latest updates for Windows and for the program displaying the error. Note that the update for the program might be listed as an optional update on the Windows Update page. Click Start button then show all programs and open Windows Update.
2. Check Action Center for a solution to the program displaying the error.
When you have Windows Error Reporting turned on and a program stops working, a problem report is typically sent to Microsoft for more analysis. If a solution is available, or there are steps you can take to minimize the likelihood of the problem recurring, they'll be available in Action Center. Click to Flag icon in Notification area to open Action Center.
3. Update and run your antivirus software. Windows doesn't come with antivirus software, but Action Center can often monitor the antivirus software that you or your ... Read more

More replies
Relevance 45.1%

Note I just installed a few firewire card. However, it doesn't seem to matter if I have it in or not.

STOP: 0x0C5 (0x0, 0x02, 0x01, 0x8053465A)
 

Answer:Help me solve this blue screen error

11 more replies
Relevance 45.1%

C:\program files\TruekKey\McAfee.Truekey.cp.core.localization.dll? What is this error? How to solve?

More replies
Relevance 45.1%

E sonic phoenix award bios can't do detected USB removal disk the first problem that is fromMotherboard so can i update bios for that errors ?

More replies
Relevance 45.1%

its cloud Linux hosting ,in
 

More replies
Relevance 45.1%

how to solve Bluetooth error on windows 10 ?
 

More replies
Relevance 45.1%

I read about connection 45 & 47 pins to resolve "ide #1 error" and my question...
how change c-sel/slave mode in diffrent way (without connecting pins)?
I just bought liteon dvd-rw drive (sosw-833s 51c) and install into satellite 1410-304 and my laptop don't work with this drive (at startup "ide #1 error", os don't see drive)

Answer:Satellite 1410-304: How to solve IDE #1 error?

I think, there is no other option (i would also not recommend to change the pin assignment).
You should have asked your Servicepartner what drive's are supported on the type of Notebook, he know's about it ..... I'm sorry to say, but you should have a look before you bought the drive.

Br, Ben

5 more replies
Relevance 45.1%

Hi,
I've been experiencing a Securityrisk.downldr and would like to know how to solve it? I've been trying with NAV and superantispyware, but not successful. Below is my Hijackthis scan log. Pls help urgently! thanks ya!

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 1:58:19 AM, on 26/3/2008
Platform: Windows Vista (WinNT 6.00.1904)
MSIE: Internet Explorer v7.00 (7.00.6000.16609)
Boot mode: Normal

Running processes:
C:\Windows\system32\Dwm.exe
C:\Program Files\Bioscrypt\VeriSoft\Bin\AsGHost.exe
C:\Windows\system32\taskeng.exe
C:\Windows\Explorer.EXE
C:\ProgramData\ybspqjyt\qhcxohul.exe
C:\Program Files\Apoint2K\Apoint.exe
C:\Windows\System32\rundll32.exe
C:\Program Files\Intel\Intel Matrix Storage Manager\IAAnotif.exe
C:\Program Files\HP\QuickPlay\QPService.exe
C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QLBCTRL.exe
C:\Program Files\Hewlett-Packard\HP Health Check\HPHC_Scheduler.exe
C:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe
C:\Program Files\Hewlett-Packard\HP Wireless Assistant\WiFiMsg.exe
C:\Program Files\Java\jre1.6.0_05\bin\jusched.exe
C:\Program Files\Google\Gmail Notifier\gnotify.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Program Files\HP\HP Software Update\hpwuSchd2.exe
C:\Program Files\Adobe\Reader 8.0\Reader\reader_sl.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\Windows Sidebar\sidebar.exe
C:\Windows\ehome\ehtray.exe
C:\Program Files\Windows Media Play... Read more

Answer:How to solve a Securityrisk.downldr error?

Please do this:

Download Deckard's System Scanner (DSS) to your Desktop. Note: You must be logged onto an account with administrator privileges.Close all applications and windows.
Double-click on dss.exe to run it, and follow the prompts.
When the scan is complete, two text files will open - main.txt <- this one will be maximized and extra.txt <-this one will be minimized
Copy (Ctrl+A then Ctrl+C) and paste (Ctrl+V) the contents of main.txt here.
Please attach extra.txt to your post.
To attach a file to a new post, simplyClick the[Manage Attachments] button under Additional Options > Attach Files on the post composition page, and
copy and paste the following into the "Upload File from your Computer" box:C:\Deckard\System Scanner\extra.txt

Click Upload.

What DSS will do: create a new System Restore point in Windows XP and Vista.
clean your Temporary Files, Downloaded Program Files, and Internet Cache Files, and also empty the Recycle Bin on all drives.
check some important areas of your system and produce a report for your analyst to review. DSS automatically runs HijackThis for you, but it will also install and place a shortcut to HijackThis on your desktop if you do not already have HijackThis installed.

---------------------------------------------------------------------------------------------

1 more replies
Relevance 45.1%

Do I wanted to know if anyone can help me to fix the error 0x800f081f Dism/online /Cleanup-Image /RestoreHealth?

Thanks a lot.
Best regards.

Answer:How to solve the error 0x800f081f Dism?

Resolution

For Windows 8.1, Windows 8, Windows Server 2012 R2 or Windows Server 2012

To resolve this problem, use the inbox Deployment Image Servicing and Management (DISM) tool. Then, install the Windows update or service pack again.
Open an elevated command prompt. To do this, swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click Search. Type Command Prompt in the Search box, right-click Command Prompt, and then click Run as administrator. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.Type the following command, and then press Enter.
It may take several minutes for the command operation to be completed.DISM.exe /Online /Cleanup-image /Restorehealth
Important When you run this command, DISM uses Windows Update to provide the files that are required to fix corruptions. However, if your Windows Update client is already broken, use a running Windows installation as the repair source, or use a Windows side-by-side folder from a network share or from a removable media, such as the Windows DVD, as the source of the files. To do this, run the following command instead: DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess
Note Replace the C:\RepairSource\Windows placeholder with the location of your repair source. For more information about using the DISM tool to repair Windows... Read more

5 more replies
Relevance 45.1%

imagedit.ocx or one of its depenencies not correctly registered

Answer:how to solve imagedit error message

Simply correctly register imagedit.ocx or one of its depenencies.Try reinstalling the associated application.Bryan

3 more replies
Relevance 45.1%

Hi..

Info :-

Windows XP Home edition with SP2

Im assuming its becuase of SP2 but not sure of the fix..

Im trying to load a CD (1 - 2 years old) its a Weight Watchers Points Plus CD , it used to run fine a couple of years ago but now for some reason it wont allow me to open up the program once installed. Installation is fine but I get the following erors upon running the .exe

Any ideas ?





This is the log file that is created..

<?xml version="1.0" encoding="UTF-16"?>
<DATABASE>
<EXE NAME="wwde.exe" FILTER="GRABMI_FILTER_PRIVACY">
<MATCHING_FILE NAME="wwde.exe" SIZE="5721340" CHECKSUM="0xB7F4751E" BIN_FILE_VERSION="5.3.0.0" BIN_PRODUCT_VERSION="5.3.0.0" PRODUCT_VERSION="5, 1, 0, 0" FILE_DESCRIPTION="Authorware Runtime" COMPANY_NAME="Macromedia, Inc." PRODUCT_NAME="" FILE_VERSION="5.300" ORIGINAL_FILENAME="" INTERNAL_NAME="" LEGAL_COPYRIGHT="1987-1998, Macromedia, Inc." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="5.3.0.0" UPTO_BIN_PRODUCT_VERSION="5.3.0.0" LINK_DATE="09/12/1999 19:15:51" UPTO_LINK_DATE="09/12/1999 19:15:51" VER_LANGUAGE="English (Uni... Read more

Answer:Runtime Error , failed to solve..

9 more replies
Relevance 45.1%

Hi!
I've seen a few people with this issue around but yet to find a fix, getting the error : Internalerror:extracttemporyfile: the file 7z.dll was not found! I've tried reinstalling 7zip, pasting the 7z.dll to various places etc but no fix found! Any advice? anyone else had this?
Thanks!

Answer:Trying to install games, 7z.dll error, can't solve

Try PeaZip

1 more replies
Relevance 45.1%

Hi,

Could anyone tell me if there is an updated driver for the TSSTcorp CDDVDW TS-L632H ATA Device? The device is not available as a selectable drive and in device manager it reports the following error:

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

I have removed the device and the driver, however on scanning for hardware; vista re-installs the default driver and the same error returns.

Because of this error, I am unable to update the firmware for the drive and the firmware update is unable to see the drive.

Any ideas??

Thanks in advance.

Answer:CD/DVD drive issue on Satellite L notebook - error code Code 39

Hi buddy

What to say?this issue is known and caused by wrong Windows registry entries.
Microsoft has released and published some knowledge articles.

Check this:
http://support.microsoft.com/kb/270008/en-us

First of all I recommend removing the CD/DVD drive from the device list in device manager. Then remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}

Finally reboot the notebook.

That?s all.

PS: you would find this solution also without my help?. You should use the forum search function! It?s helpful!

5 more replies
Relevance 45.1%

i keep getting these two error codes every time i try to update these programs through windows update: Update for Windows 7 (KB974332) Update for Windows 7 (KB974431) Update for Windows 7 (KB976098) Ive tried to download these updates from the download centre with out any success. please help me to fix this problem im using is windows 7 ultimate 32 bit

Answer:error Code 800F081F and Code 8024200D with window 7 update

Hello,Some third party programs can affect the Windows Update service. If you are running any third party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection), security or anti-virus programs (Norton, McAfee, etc.), I recommend you temporarily disable or uninstall them and then try accessing Windows Update later. If the problem still happens, try the following steps:Rename the Windows Update Softwaredistribution folder================================================1. Close all the open windows. 2. Click "Start", click "All programs", and click "Accessories". 3. Right-click "Command Prompt", and click "Run as administrator".4. In the "Administrator: Command Prompt" window, type in "net stop WuAuServ" (without the quotes) and press Enter.
Note: Please look at the cmd window and make sure it says that it was successfully stopped before we try to rename the folder. However, if it fails, please let me know before performing any further steps and include any error messages you may have received when it failed.
5. Click "Start", in the "Start Search" box, type in "%windir%" (without the quotes) and press Enter.6. In the opened folder, look for the folder named "SoftwareDistribution".7. Right-click on the folder, select "Rename" and type "SDold" (without the quotes) to rename this ... Read more

2 more replies
Relevance 45.1%

Attachment 290231
i having problem with this windows update

here is zip for CBSAttachment 290230


thanks!!!

Answer:windows update error (code 9c48 and code 9c57)

You haven't run the CheckSUR tool.

Pleasefollow the WindowsUpdate Posting Instructions and post the requested data

6 more replies
Relevance 45.1%

I am having the typical black screen. I just want to see if anyone has a resolution to the problem before I have to spend money for a new one. I checked everywhere before I posted for help.

Thanks in advanced. Joe D.

More replies
Relevance 45.1%

I am completely stumped by this problem. I will do my best to explain it and see what you fine folks can do.

I had an older bluetooth dongle, off-brand model, 2010-2011 year, that I installed on my new desktop computer. It worked, but sound quality on my Sony Dr-BT101 headset wasn't great. It worked well with my bluetooth-enabled phones and tablets, so I suspected the dongle. I bought a CSR8510 dongle, which came with a CSR Cambridge Radio Harmony software stack. I installed the software, and turned on the headset, paired it, but no sound came out of the headset. I went to Sound, saw no entries. Went to device managers and saw the parts in yellow. I tried to update the driver but all I got was Code 18 error and this weird message in the picture. I clicked on properties and saw this message.





Quote:
The drivers for this device are not installed. (Code 28)

There is no driver selected for the device information set or element.




I am stumped. I've tried uninstalling, re-installing, installing other Bluetooth drivers, waving a magic wand, none of it has worked. I'm thinking it's a problem with the Registry, but I am not sure how to proceed.

Any ideas?

Answer:Bizarre Bluetooth driver problem (Code 18 and Code 28 error)

Give this a try. It's free.
https://www.slimwareutilities.com/slimdrivers.php
You do need to resolve those Other devices category issues.

1 more replies
Relevance 45.1%

I have a HP 522c AMD Athlon 2000+, running windows xp. There is an integrated video card that went bad. So in installed an AGP video card it is a 3D Prophet 4000XT 32 MB. Now that the card is installed when I have it activated there is a code 12 on one of the pci to pci bridges so that my network card in the other pci slots will not work. I have tried the network card on other computers and it works fine, i have also tried the video card and it works fine. I also tried other items in the pci slots while the agp card is in(modem, sound card) and i still recieve the same error. The card works when a pci bridge is enabled but only with the VGAsave driver and with very low quality. When i check the device manager while both pci to pci bridges are enabled, when i can only run the VGAsave driver, it says the there is a conflict under the I/O range with the VGAsave and an Pci to Pci bridge. Any windows updates just delets the pci to pci bridge listed in the device manager. And i have tried all the drivers i could from AMD, HP, Hercules. Any help would be welcomed on how to fix this.
 

Answer:Code 12 in xp on a Pci to Pci bridge, Recieve a code 12 error with video card

your hp box is not only engineered by hp (who tend to focus on low assembly costs) but is an oem build, thus severely limiting your options. a suggested next step would be to attempt to poke around in the bios setup utility and/or to try out a wider variety of cards/slot configurations. good luck.
 

9 more replies
Relevance 44.69%

My Windows 7 professional 32 bit shows this problem ..how to solve this problem help me friends.

Answer:Windows 7 Shows .DLL Error How to solve this problem Help me

Hello mkannan and welcome to Seven Forums.

When I googled msisvt32.dll I got "no results found". Whenever I see that I immediately start thinking virus or other malware. Legitimate .dll files almost always have information available about them. Suggest you run a full scan with your own updated antivirus suite. No anti-virus product is 100% effective 100% of the time (if there was such a thing we'd all be using it.) So I also recommend you scan your computer with some additional free on-demand scanners. The more scanners you use that come back "no malware found" the more likely your computer is not infected.

Windows Defender Offline

Malwarebytes

ESET Online Scanner

SuperAntispyware

HitmanPro

Kaspersky TDSSKiller

After running the malware scans I'd also check for damaged or corrupt system files. Run a system file checker scan from an elevated command prompt (option two.) If problems are found, run the scan 3 times and reboot the computer after each scan.

SFC /SCANNOW Command - System File Checker

Please post back the results of the scans.

2 more replies
Relevance 44.69%

Hey guys,

like 6 hours ago ....I recently got this message :

This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator.

this came up when I was trying to go into any folder on my desktop .....my documents......and any other folders I have. I can go into My Computer but when I can there I cant get into my documents or the C Drive where I have alot of important stuff which I really need to get into.
I was searching through forums from google ......for this type of situation....I found alot of people with the same problem..,....the one I heard that would work is using FixPolicies.exe........but the problem is when I use that I can install it and everything ....but I cant seem to open the folder .....and that Restriction message comes up again when I try to open the folder ....soooo I really dont know what to do......I must figure a way to get into my documents...

Im running on Windows XP ...and yes I am the system adminstator as well...I have scanned my computer ....I had 5 trojans detected.....they have been removed.......

Any HELP!!! would be Great..ASAP ...... ..im in a total jam right now.. ..I hope I dont lose any of the files in my documents or C drive
 

More replies
Relevance 44.69%

Hp Pavilion Dv7 Notebook Pc, With OS! Windows 7 home premium 64bit.Error message:-  Hard Disk 1 (301) - it sound like there could be a malwareVirus on it. Got AVG Internet Security 2012 on the notebook. I don't knowThe guys at the Shop where I bought it said I must not update the notebook'ssoftware & drivers to much.











Solved!
View Solution.

Answer:How do I solve a "Hard disk 1 (301)" error on my HP Pavilion...

Hard Disk 1 (301) is a hard drive failure. It means that the hard drive needs to be replaced.You'll need to get a new hard drive and install it, then you'll need to reinstall the Windows operating system using the HP Recovery Media. If you're in warranty, HP will send you the parts per your warranty terms.If you're out of warranty, you'll need to purchase a replacement hard drive and then call HP to order the HP Recovery Media for your specific notebook.The number for US support is 1-800-474-6836.I will be glad to answer any additional questions or provide more details if you'd like to replace it yourself. It's not too difficult.

4 more replies
Relevance 44.69%

When i am downloading the McAfee Manager subscription and it suddenly stops in the middle of the process and showing Error 7305. Is there any way how to Fix McAfee Antivirus Error 7305. I tried for a few http://www.mcafeetechsupportnumber.... persons online.

More replies
Relevance 44.69%

Your PC need to restart.
Error Code: 0x0000005D
Parameters:
0x00000000BFEBFBFF
0x0000000020100800
0x0000000000000001
0x0000000000000001

Answer:Windows 10 Tech Preview Error How to solve?

Duplicate thread. Continue advice here to keep things tidy... http://forums.windowscentral.com/ask...dows-10-a.html
Thank you.

2 more replies