Computer Support Forum

Interrupted during wake up, can't boot anymore

Question: Interrupted during wake up, can't boot anymore

Hey !

I had a very very disturbing experience in which I was forced to shut down the computer, but failed and accidentally sent it to sleep.
Unfortunately, it never managed to wake up. It stayed during half an hour blocked early in the restarting process... I took my chance with a hard-reset.

And then it becomes insane. It gives me the cold shoulder, just hanging in a "Reverting changes" task. It's been a good while too.

I stand in awe wondering how is it even possible to break my setup like this. Considering the damn thing came with no restoring CD of any kind, on a scale of it's all fine to you're screwed, how exactly would you rate me ?

Thanks for helping !

Relevance 100%
Preferred Solution: Interrupted during wake up, can't boot anymore

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Interrupted during wake up, can't boot anymore

It might have a recovery partition where you could revert it to factory settings.

If you can get into the bios enable the boot menu which should activate F-12 to show the boot menu on startup.
If so choose 10 & get into recovery options.

4 more replies
Relevance 56.99%

Hello. I have a problem with my PC. For some reason for about a year my PC can't wake up after it goes to sleep. I've reinstalled Windows 7, but on a newly installed, clean OS the problem still stays. On Windows 8.1(which I had only for a while because it was awful) it was the same. I'm not sure if it's a windows issue, hardware problem or something.
The thing is, sometimes my PC can't wake up. Not always, but it's very often. It goes to sleep well, but when I wan't to wake it up it starts, I can hear fans working, and then stops. Just like that, as if the power was cut off. Then it starts again and stops once more. And it goes like that forever. I have to unplug it from power and wait a bit, only then it starts, but from hibernation.

Does anyone knows how to fix that? Why does it do such a thing? I tried looking up google for such problems but most of them were of USB mouses/keyboard not waking up or actually waking up PC. I couldn't find my problem.

My PC:
Gigabyte P35-DS3
Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (4 CPUs), ~2.4GHz
3072MB RAM
NVIDIA GeForce GTX 260
Windows 7 32-bit

Answer:PC can't wake up anymore.

It may be a power issue. Sleep is a low power state that holds all information in memory. If the power at any time is lost that information is gone and it's impossible to wake up.
Hibernation doesn't need power because it writes to disk.

I assume you have a desktop computer and are using Hybrid Sleep which can be useful in case of power outage. One option is to switch from Hybrid Sleep to Hibernate and you won't run into these problems anymore.

9 more replies
Relevance 55.76%

I used hybrid sleep for a year without any problems.

Suddenly, since this week, Windows can't wake from it. It starts loading, I can hear the fans and the HDD spinning, but the screen stays black.

I then have to power it off completely and turn off the PSU for a few seconds to boot into Windows again.


Everything else works fine (normal booting, restarting, regular sleep, hibernate...).


I already:
- reinstalled Windows
- tested RAM with Memtest
- tested the HDD for errors
- reset BIOS

Any ideas??

(Motherboard is a GA-EP31 DS3L, a SATA and a PATA HDD, 5450 GPU.)

Answer:Cannot wake from hybrid sleep anymore

Hi

First update your profile specs....

Second... use this tool to upload the necessary files for us to check....

4 more replies
Relevance 55.76%

i cant double tap my screen to wake my lumia520 any more.i used to do this and i enjoyed it but my phone just couldn't respond anymore.what could the problem be and how can i go about it?

Answer:Why can't I double tap to wake up my Lumia 520 anymore?

obvious thing to check: make sure its switched on
its safe to assume it functions fine with the power button?
can you make a call where the display would turn on and off appropriately (off when top part covered, on when not)

2 more replies
Relevance 54.53%

I have a W530 laptop with an external 30 inch display attached via docking station / display port conection. I usually use the external display as the main display, and extend the desktop to the laptop screen, which sits to the right of the external display.Way too often (but not always), the laptop dIsplay and/or the external display do not light up anymore after they got dark due to the power scheme. The backlight illuminates, but the screen remains black. Windows-P and switching to another configuration sometimes resolves the issue, but mostly not. If e.g. the laptop is dark, and I then switch to laptop only, I have no screen left. What usually helps is to suspend and resume the laptop.I use Windows 8, factory install, patched to all the latest drivers and windows updates. It happens on two different installations (I have an alternate Windows 8 installation that I sometimes boot from a disk in the ultrabay).Is there any way to debug this?Thansk! Martin Update: Sometimes the problem manifests even directly after booting. The laptop display goes through a weird cycle of black/white, and then remains almost black with backlight on. Again, suspend/resume fixes the issue.

Answer:Laptop and/or external display do not wake up anymore after getting dark

Hi, tinue
 
Does this issue occur if the laptop is not in the docking station? Does it occur if the machine is in the docking station, but not connected to the external display? Also, how long has this issue been occurring?
 
I would recommend trying to boot into Safe Mode and see if that helps the issue. If the issue occurs while in Safe Mode, then the issue may be hardware in nature. To boot into Safe Mode in Windows 8, open up the Charms Bar, select Settings, then Power. Hold down the Shift key and click Restart. Windows should begin shutting down and then a menu should pop up asking you what you want to do. Select Troubleshoot, then Advanced, and finally Startup Settings. Restart from here, and you can boot into Safe Mode with Networking when your computer restarts. In this mode, everything but core drivers and network drivers are not running.
 
Let me know how it goes,
Adam





______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

4 more replies
Relevance 54.53%

When i first got my laptop i could simply put the screen down and my computer would fall asleep. when i would come back to and lift the screen up it would start up at the log in screen. Now when i close the screen and open it back up my computer starts but the screen stay back until I hard restart my whole computer.

More replies
Relevance 53.71%
Question: Boot interrupted

I have a fairly new Acer netbook that has suddenly started to have a booting issue. Before the problem started, the normal sequence was that just after the power button was pushed, the cursor would show up at the upper left corner of a blank screen, and two or three seconds later the words, "Windows starting" would come onto the center of the screen and the booting would continue as normal.

Recently, however, the booting process started freezing at the point with the cursor in upper left of the black screen. I learned that if I hit control/Alt/delete the screen would go black for a couple seconds, and then the booting process would resume as normal with the "starting windows" coming on again.

I should also mention that using control/Alt/Del doesn't always work the first time either. Sometimes I have to do it two, three or four times to get the booting going again.

Does anyone know what may have caused this problem, and more importantly, how to correct it?

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD C-60 APU with Radeon(tm) HD Graphics, AMD64 Family 20 Model 2 Stepping 0
Processor Count: 2
RAM: 1770 Mb
Graphics Card: AMD Radeon HD 6290 Graphics, 256 Mb
Hard Drives: C: Total - 291830 MB, Free - 238344 MB;
Motherboard: Acer, JE10-BZ
Antivirus: avast! Antivirus, Updated and Enabled
 

Answer:Boot interrupted

Whenever I'm confronted with a Windows or boot-up problem that has no other obvious cause, I test the hard drive first before looking elsewhere. The most reliable test is the drive maker's own testing or diagnostics software. The links are here:
http://www.tacktech.com/display.cfm?ttid=287

I daresay the hard drive is fine but it's best to be sure of that first.
 

2 more replies
Relevance 53.71%
Question: Boot interrupted

This just started after using Windows 10 normally for two days.

In the boot process at the start I get a black screen headed by "Edit Boot Options" which then describes the correct boot path etc. and is followed by [ /NOEXECUTE=OPTIN ].

If I then click on "submit", the boot proceeds normally.

How can I get rid of this extra step?
------------------------------------------------------------
Solved by using command prompt as admin
"bcdedit /set optionsedit No"

More replies
Relevance 52.89%

Naturally these things always happen at the worst time...last night I'm resizing a partition on an external hard drive and browsing at the same time, which I think had a hand in crashing my laptop. Apparently this happens all the time with Paragon Partition Manager, as Google suggested this topic (Interrupted operation: Insert the Recovery CD - Paragon Community Discussion Forums) before I even finished my query. It says I need to fix the Master Boot Record. Here's where I am right now:

1. "Interrupted Operation" error when rebooting. Windows asked for a recovery CD.
2. Changed boot order from HD to CD drive.
3. Refused to click through my OEM recovery CD because it only appeared to include the option to format my laptop
4. My laptop has a barebones optional OS which I can use only to play music and visit websites. From here I can see that my HD is still intact.
5. Tried System Recovery Options but OEM CD wouldn't allow it.
6. Bought a copy of W7 from Office Max in an attempt to get to the recovery options screen.
7. It worked, but before I could get to the command prompt to follow MBR - Restore Windows 7 Master Boot Record, Windows recognized a startup problem and offered to fix it automatically...so I accepted.
8. Automatic fix did not work. Not only does booting from HD still show "Interrupted Operation" message, the W7 cd no longer loads.

I'm extraordinarily distraught. My entire life was on that laptop, including my college transfer essay (and on t... Read more

Answer:Interrupted Operation, won't boot

Have a look at the partitions - are they still as they were, and do they contain a recognized filesystem.
Did you boot the Paragon recovery media to see what is going on?
Boot Paragon cd - rt click the Hard drive ( not a partition) and select update mbr.

2 more replies
Relevance 52.89%

When I recently tried to reboot my computer, the boot sequence stopped and gave/gives me the following message. "Hardware Monitor found an error. Enter Power setup menu for details." I've tried to enter the defaults but nothing I tried works. Also, when I press F1, Windows XP starts to load but then the screen goes black and the system restarts. Does anyone know what to do?
 

More replies
Relevance 52.48%

Aloha,

I'm helping out a friend. He has a Sony Vaio laptop. He tried to download the latest XP system updates a couple times and turned off the computer during the download. After the first time everything was fine, but after the 2nd time he must have interrupted it at a critical point. Now XP won't boot, goes through the XP screen and once in a while a message pops up very briefly that says not enough virtual memory and then reboots.

I can't get it to boot in safe mode either. Also tried to boot from the XP CD and again restarts on its own.

We'd like to fix it so he does not lose any info on the hard drive.

Any guidance would be greatly appreciated.

Mahalo,

Srf

Answer:Xp Update Interrupted Now Wont Boot

How much drive space is on the computer?

2 more replies
Relevance 51.66%

Hi my daughter's elite book was updating when it was switched off, now on power up i get the window icon and the circle of dots then a flash of a box at the top 1/2 of the screen then it says restoring from a previous version goes dark and then repeats this cycle over and over. I've tried f11 the computer just beeps. I can't seem to get to any Windows screen to get it safe mode, please does anyone have an idea what I can do? Many thanks

More replies
Relevance 51.66%

Hello,

I just got a new Acer laptop with Vista and a Windows 7 upgrade. I installed the upgrade, and everything went fine, but after I shut it down it went into auto installing updates.

As I was on critical battery and couldn't find my charger, it shut down before completion. Now whenever I try to restart I get an error screen (which is only on for a second or two so I can't get the numbers off it) and then it tries system repair, which fails, and if I try system restore, this also fails.

I would have been happy to re-install the OS, as with it being new I have no important files on, but didn't get a Vista disc with the laptop and my Windows 7 disc is just an update disc.

Any advice?

Thanks,

Steven

Answer:Windows Update interrupted and now cannot boot laptop

Just took a photo of the screen as it flashed up and have the full message and error codes from the error screen. I've also put the Startup Recovery error messages/code below. System Restore says it runs fine, but then on restart it just returns to the Windows Error Recovery screen, then the Stop Error screen regardless of which restore point I choose (from 3)

STOP ERROR

"A problem has been detected and windows has been shut down to prevent damage to your computer.

A process or thread crucial to system operation has unexpectedly exited or been terminated.

If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

Check to make sure any new hardware or software is properly installed. if this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select safe mode.

Technical Information:

*** STOP: 0x000000F4 (0x00000003, 0x861266F8 0x86126864 0x82428D50)

Collecting data for crash dump...
Initialising disk for crash dump...
Beginning dump of physical data...
Duping physical memory to disk: 100"

STARTUP REPAIR

"Problem signature:
Problem Event Name: Startup... Read more

9 more replies
Relevance 51.66%

Hiya

i _think_ this is the correct forum.

PC has Windows 8.1 on SSD and Windows 10 on HDD.

The install of Windows 10 was over a Windows 7 installation - and i had it keep all data and programs. Which is did successfully.

When booting in 8.1, it decided to repair the disk with Windows 10.
A fuse blew and now Windows 10 will start to boot (windows logo showing) and then will just go to a blank screen.

Trying to access the Windows 10 HDD from 8.1 - gives


Running EaseUS Data Recovery on the drive shows that the original data is there..

So my question is how can i rescue my Windows 10 with all my apps and data?

Buzz

Answer:After Interrupted HD Repair Windows 10 wont boot

Hello buzzbuzz Welcome to the Ten Forums!

Having a fuse go or a breaker tripped on you isn't a garden party! I've been right in the middle of something and lost files, data from that type of incident on occasion. If you made the Recovery Drive for 10 or made up the live media for 10 then you have readily available options to work with in order to get 10 running again. (Notation due to the size exceeding 4gb a 5gb or larger usb flash drive will be required to see that made up)
That would be the Recovery and Repair Tools included on the live media for things like the Automatic Startup Repair tool, other troubleshooting options, that includes the command prompt option still, and the last resort of the PC Reset that will bring you back to Day One with the need to install programs again!

What you can do from the 8.1 side is right click on the G drive 10 is on and open up the Tools tab to run the Error checking option. That will start up the Disk Check tool to scan for any disk errors. And besides the startup repair option and the PC Reset you also have the option to see an in place Upgrade to Repair type install that will 10 going again. Repair Install Windows 10 with an In-place Upgrade - Windows 10 Forums[2]=Installation%20and%20Setup

These are some of the most commonly used repair options available. If you need to see the 10 installation media created having seen an online upgrade by way of the 10 app you will also want to follow the steps seen in the guide for downloading... Read more

12 more replies
Relevance 49.2%

Good morning,

I have a 4 years and a half old Sony VAIO computer with windows 7 home.

The computer was working properly until a month ago or such. Sure, maybe a bit slow since it's a bit old already yet it was working quite decently.

Unfortunately, one month ago the computer ran out of energy while it was starting (when Windows was initializing) When I tried to turn it on once again, I discovered it would go into an infinite loop trying to restore Windows 7 without success. I tried restarting it in every single mode, yet it wouldn't happen.

I tried to fix the error by using f8 and guiding myself by the assistance of the computer but did was a failure as well.

All I managed to achieve was to make a scan with FRST.

I would appreciate any help/advice on what to do next.

Here are the logs:
Scan result of Farbar Recovery Scan Tool (FRST.txt) (x64) Version: 23-11-2014 01
Ran by SYSTEM on MININT-TP7Q5S4 on 23-11-2014 20:41:25
Running from G:\
Platform: WIN_7 (X64) OS Language: Espa?ol (Espa?a, internacional)
Boot Mode: Recovery

The current controlset is ControlSet001
ATTENTION!:=====> If the system is bootable FRST must be run from normal or Safe mode to create a complete log.

Tutorial for Farbar Recovery Scan Tool: FRST Tutorial - How to use Farbar Recovery Scan Tool - Malware Removal Guides and Tutorials

==================== Registry (Whitelisted) ==================

(If an entry is included in the fixlist, the registry item will be restored to default or ... Read more

Answer:Sony vaio windows 7 home wont boot after interrupted power FRST LOGS

bump?

2 more replies
Relevance 49.2%

W7 PC wakes up from sleep every few minutes. It didn't use to. I am the builder / owner / sole user. Investigation done so far at the DOS prompt to establish the cause:

powercfg -devicequery wake_armed
(no results returned)

powercfg -waketimers
There are no active wake timers in the system

powercfg -lastwakeWake History Count - 1
Wake History [0]
Wake Source Count - 0Other ideas to try and establish the cause with please?

Many thanks.

More replies
Relevance 47.15%

I wanted to set up Ubuntu on my computer, and followed the instructions in the first answer to this thread: dual boot - How to install Ubuntu alongside Windows 7/8 - Ask Ubuntu

As instructed, I created a logical partition using EaseUS software. I did this on my H:/ drive, a hard disk drive (whereas Windows 7 was installed on C:, and SSD).

After a mandatory reboot for the new partition changes, I did not immediately go to install Ubuntu, although I had Live USB to do so. Instead, if I remember properly, I booted into Windows to make sure everything was OK, but only to find out that some "Windows could not boot properly", giving me the option to 'Launch Startup Repair' - which I did, but to no avail. All it did was reported that some 2 system files were missing or corrupt.

I then installed Ubuntu on a third drive because I still needed it to perform some benchmarking. I did this using the 'install alongside windows 7' option.
But now that I don't need Ubuntu anymore, all I am interested in is getting back to Windows, while keeping all the files and programs intact.

How should I go about fixing this? Delete the logical partition on the other drive? I also have that Windows installation CD, and I'm thinking its repair options could be useful - but not having a whole lot of self-confidence, I don't know what steps exactly to take to preserve my files.

Any help is greatly appreciated!

Edit 1: I booted from the Windows installation disk just to see the options avail... Read more

Answer:Wanted to Dual Boot Win7 and Ubuntu - Windows Won't Boot Anymore

Hi I Am User,

Upon inserting the Windows installation disk you should be able to install a new Windows and be able to select Upgrade and it should create the Windows.old folder on the new Windows.

Cheers
Boris

3 more replies
Relevance 46.74%

Hi,
yesterday I wanted to install Windows 10 Enterprise on my T1650 test machine. Before doing so, I successfully updated the BIOS to A20. After updating BIOS, I've enabled UEFI + Secure Mode, saved the changes and... couldn't start the PC anymore. When turning the PC on, monitor immediately goes into power saving mode, there is obviously no signal coming from the PC. Removed the Nvidia Quadro NVS 300 and plugged the monitor into board's VGA slot, no success. Tried to clear the CMOS (battery out, jumpers), nothing helped.
Any ideas?

More replies
Relevance 46.74%

Hi All,I'm getting DNS error in IE7 on Windows Vista Business. Also Firefox Gives a Connection Interupted Message.I already tried Google to resolve this error, but she aint allot of help.Herewith a list of attempts I made to fix this error:Renamed Hosts file to hosts.oldRan netsh int ip reset c:\resetlog.txt (No Errors)Ran netsh winsock reset (No Errors)Deleted Temp, history, cookies etc in IE7Reseted IE7 under advanced IE OptionsRan Full System Scan with Windows DefenderRan Full System Scan with Trend Micro Internet Security Pro (Program Version:17.0.1305;Engine Version 8.911.1001; Pattern Version 5.906.01)I am able to connect to https and Web Connections <hxxp://10.2.0.25:8085/>Herewith the DDS log:DDS (Ver_09-03-16.01) - NTFSx86Run by rok at 7:44:25.45 on 2009/03/20Internet Explorer: 7.0.6001.18000Microsoft® Windows Vistaâ„¢ Business 6.0.6001.1.1252.27.1033.18.2812.1459 [GMT 2:00]AV: Trend Micro Internet Security Pro *On-access scanning enabled* (Updated)============== Running Processes ===============C:\windows\system32\wininit.exeC:\windows\system32\lsm.exeC:\windows\system32\svchost.exe -k DcomLaunchC:\windows\System32\svchost.exe -k Cognizancec:\Program Files\Fingerprint Sensor\AtService.exeC:\Program Files\Hewlett-Packard\File Sanitizer\HPFSService.exec:\Program Files\Hewlett-Packard\Drive Encryption\HpFkCrypt.exeC:\windows\system32\svchost.exe -k rpcssC:\windows\System32\svchost.exe -k secsvcsC:\windows\system32\Ati2evxx.exeC:\windows\Syste... Read more

Answer:IE7 DNS Error / Firefox Connection Interrupted / Connection Interrupted

My HiJackThis log:Logfile of Trend Micro HijackThis v2.0.2Scan saved at 08:30:21 AM, on 2009/03/20Platform: Windows Vista SP1 (WinNT 6.00.1905)MSIE: Internet Explorer v7.00 (7.00.6001.18000)Boot mode: NormalRunning processes:C:\windows\system32\taskeng.exeC:\windows\system32\Dwm.exec:\Program Files\Hewlett-Packard\IAM\Bin\AsGHost.exeC:\windows\Explorer.EXEC:\Program Files\Windows Defender\MSASCui.exeC:\Program Files\ActivIdentity\ActivClient\accrdsub.exeC:\Program Files\Hewlett-Packard\HP ProtectTools Security Manager\pthosttr.exeC:\Program Files\Synaptics\SynTP\SynTPEnh.exeC:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exeC:\Program Files\Hewlett-Packard\File Sanitizer\CoreShredder.exeC:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QLBCTRL.exeC:\Program Files\Analog Devices\Core\smax4pnp.exeC:\Program Files\Trend Micro\Internet Security\UfSeAgnt.exeC:\Program Files\Adobe\Acrobat 9.0\Acrobat\acrotray.exeC:\Program Files\Common Files\LightScribe\LightScribeControlPanel.exeC:\Program Files\Trend Micro\Internet Security\TMAS_OE\TMAS_OEMon.exeC:\Program Files\Nokia\Nokia PC Suite 7\PCSuite.exeC:\Program Files\WIDCOMM ... Read more

5 more replies
Relevance 46.33%

Hello,

I am studying for my A+ certification and I wanted to try to install Recovery Console on my PC. I set the CMOS boot order to first boot from the CD ROM drive. I put my XP Professional installation CD in and restarted the computer. Once the XP setup program started running it looked like it was copying files, which scared me because I thought it would ask me before it did anything. So then eventually it got to a menu screen and I decided to press F3 and quit the setup, without installing Recovery Console. I went back into CMOS and reset the boot order to boot from the hard disk drive again, then saved and exited. However now it won't let me boot into Windows anymore, but rather prompts me to insert a bootable floppy or CD-ROM, which is obviously not what I want. I think I may have erased or copied over Boot.ini, and possibly other files. I want to go back to my previous settings before any of this occurred, and I need to keep all of my previous data, settings, programs, etc... in other words I don't want anything erased or changed at all. I'm hoping somebody can provide me step-by-step instructions on how to do this. I would greatly appreciate any help. I am using Microsoft Windows XP Professional SP3. I built the PC myself, it is not a store bought PC.

Answer:Possibly overwrote Boot.ini, Can't boot into Windows anymore

http://support.microsoft.com/kb/314058

Re: "When you are prompted, type the Administrator password."

Unless you have set a password, there is probably not one, so just press Enter key.

1 more replies
Relevance 46.33%

I've had both windows in all my computers since the beginning of w10. On this computer win7 was on B drive win10 was on C drive. It is one drive partioned in half Have all my docs, mail, pics, music on external drive. I was using them on both os. Well all of a sudden the page where you chose os doesn't come up anymore and it boots to win7. Windows 10 is still in C Drive, but no way to start it Do I have to start over again or just reload win10? I want to f disk c drive and clean it up, reparation the drive again and start over. Am I going to have a problem loading win 10 or will Microsoft remember my computer?
Thanks in advance.

Answer:Dual boot win 7&10, Win 10 boot option is not showing up anymore

A screenshot of disk management would help:
Disk Management - How to Post a Screenshot of

Please be sure to widen all the columns so we can see all the data in them.

1 more replies
Relevance 45.51%

Hi there,

Another challenge for the experts ! Without going into too much detail, by moving hard disks around etc. I managed to screw up my 8.1 boot settings.
Partition-wise I should be ok as the 350mb "system" partition is still there, containing all necessary files.
System will however go straight for automatic repair and tell me it was not able to repair the problem.
bootrec /scanos returns 0. Bcd file seems fine when I take it through bcdedit. Renaming the bcd file and trying to rebuild one doesn't work either as it says there's no installation found.

I did not touch any partitions nor files btw, everything is still there and in tact as far as I know.

Thx in advance !

Answer:8.1 boot settings screwed, cannot boot anymore

Ow and bcdboot, bootrec /fixmbr /fixboot /rebuildbcd, etc don't do or solve anything

16 more replies
Relevance 43.87%

Hi, i've tried everything, but there's no way to boot to EFI boot order from a Wake on LAN.It only boots to legacy boot order.Do you have any ideas? When using Intel Management Engine to wake up, all is OK. Thanks! 

Answer:Wake on LAN won't boot to EFI, only legacy

No one??

1 more replies
Relevance 43.87%

My pc specs * asus z97-p motherboard * intel i7 4790 cpu * bequiet 630w psu * 8gig corsair vengeance ram * samsung 850evo 250gig ssd (win 7pro 64bit drive) * sandisk ultra II ssd 128gig ssd (win 10 drive) * 2x crucial 500gig bx100 ssd (data drives)

i recently rebuilt this into a new case and it had been working fine. Mainly using the win 7 os but more recently using the win 10 os more and more. The way it has been working is that win7 is the default boot and I have to hit the delete key on startup to select win10 to boot from.

today I was on win 10 but needed to reboot to 7. Upon doing so I hit this message:

Secure Boot Violation The system found unauthorized changes on the firmware, operating system or UEFI drivers.

It then gave me the option to boot to win10 as it is the next boot option on the list. Win 10 is now giving me the blue screen "memory management error" although I have been able to get into win10 after some more rebooting.

I ran SFC scanner and it told me that there were some problems that it cannot fix.

Everything is unplugged apart from mouse, keyboard hdmi to screen and ethernet cable. Unplugging the win10 drive from the mobo and switching the win7 drive to another port has not helped.

Has my ssd failed? has win 10 done an update that has caused this problem? It did update today, in fact the first error message I got was after win10 shut down, and when I booted into it again it installed some updates before launching.
thanks for any help!

More replies
Relevance 43.87%

My pc specs * asus z97-p motherboard * intel i7 4790 cpu * bequiet 630w psu * 8gig corsair vengeance ram * samsung 850evo 250gig ssd (win 7pro 64bit drive) * sandisk ultra II ssd 128gig ssd (win 10 drive) * 2x crucial 500gig bx100 ssd (data drives)

i recently rebuilt this into a new case and it had been working fine. Mainly using the win 7 os but more recently using the win 10 os more and more. The way it has been working is that win7 is the default boot and I have to hit the delete key on startup to select win10 to boot from.

today I was on win 10 but needed to reboot to 7. Upon doing so I hit this message:

Secure Boot Violation The system found unauthorized changes on the firmware, operating system or UEFI drivers.

It then gave me the option to boot to win10 as it is the next boot option on the list. Win 10 is now giving me the blue screen "memory management error" although I have been able to get into win10 after some more rebooting.

I ran SFC scanner and it told me that there were some problems that it cannot fix.

Everything is unplugged apart from mouse, keyboard hdmi to screen and ethernet cable. Unplugging the win10 drive from the mobo and switching the win7 drive to another port has not helped.

Has my ssd failed? has win 10 done an update that has caused this problem? It did update today, in fact the first error message I got was after win10 shut down, and when I booted into it again it installed some updates before launching.
thanks for any help!

Answer:dual boot win7/win10 wont boot to win7 anymore +BSOD "memory managemen

Hi @vinvanda.

As far as I can understand from your post that you had W7 and W10 as dual boot in two different disks.

From the uploaded data we could not find a hint of the BSOD that you said (it is not recorded anywhere, probably because it happened during boot); but some other statements are supported by the data.





Windows failed fast startup with error status 0xC00000D4.



Now, it is STATUS_NOT_SAME_DEVICE; reads as .... "The destination file of a rename request is located on a different device than the source of the rename request".

Now I am making a guess. It it is wrong, please rectify and state the proper situation.
You name the Windows 7 Disk as "system" and the Windows 10 disk as "Win 10". You also said that windows 7 is the default boot. So I am guessing that the boot files are in the the windows 7 disk.

The board is set as Legacy BIOS. So Fast Boot is not possible here; and if Fast Startup is enabled, windows7 needs to disk check in every startup. It is desirable to keep fast startup disabled on a computer with W7.

Now Coming to the "Secure Boot Violation". Windows 7 does not support it at all. And, it is the Firmware Validation Process of UEFI; whereas your system is set to Legacy. I think here lies the issue.





BIOS Mode Legacy



Disable UEFI and Secure boot> Hopefully Windows 7 will boot back.

If it does not, remove the windows 10 disk... Read more

3 more replies
Relevance 43.87%

M previous boot was a Samsung 840 pro 256gb and it worked like a charm. I'm running the latest version of Win8.

* Ran out of space on my 840 Pro and purchased a 500gb Samsung 850 EVO which had plenty of space and I successfully migrated over to the new drive a couple weeks ago.

* I've been using Acronis 2015 for backups and an external 4tb WD drive for these backups.

* Today I went to backup the NEW boot drive and saw I had a very large backup for the old boot SSD. In Acronis you have to boot to their program straight out of BIOS to access and erase the old backups, which I did.

* NOW I can't boot to the new Samsung 500gb drive for some reason. I've gone into BIOS and changed boot order to the 500GB but I just get a blinking cursor and a black screen when I reboot.

* However, if I change the boot order in BIOS to the OLD SSD it boots fine AND recognizes the 500gb and all it's data! What am I doing wrong?

Thanks for any help you can give~

Answer:PC won't boot to Sam SSD anymore. Need some help, please!

open disk management and verify that drive C; is listed on what size SSD

6 more replies
Relevance 43.87%

This morning, I discovered a problem with my PC.  It basically won't boot.I press the power button, and I hear the fan come on, and that's it.  My monitor, keyboard, mouse and speakers all act as though the computer is off.The strange this is, last night it worked absolutely fine, and in the 8 months that I've had it, there have been no problems, even when it came to installing a new OS.  Does anybody know what it could be?

Answer:PC won't boot anymore

Do you have virus protection? Have you checked your monitor connection etc.?[glb]Flame[/glb]

5 more replies
Relevance 43.87%

Well, I now have an unbootable computer. I don't know what's wrong. When it tries to boot, it gets a BSOD, and it goes by too fast for me to possibly read it. I heard you can change this option by getting into a special menu with F8, but F8 doesn't do anything for me. I heave the option of loading Startup Repair, too, but its SLOOOOOOOOOOOOW! There's no way this can be right! (Maybe I need to put the harddrive on an eternal reader and grab the dumps.)
 
Prior to this, the OS was laggy. I was playing music with Winamp, and it k.....ept pausing. Prior to that, I had a mess where all the programs became unresponsive and I had to force a reboot. Now, this may be unrelated, but prior to all of this, I had not one but two harddrives start to fail. One of them did fail. Now, I'm being good as far as I know. I have a surge protector on this stuff. Is there a surge coming from within? Is it time for a new motherboard, and is that the only thing that will save me? Am I smarter than I look, or not?
 
I'm on a budget. I really don't want to have to replace everything if I can avoid it.
 
I'm running WIndows 7 on a Gigabyte H55M.

Answer:Can't boot up anymore.

I would run hardware diagnostics first to check for a failing  hard drive. Most computers have built in tests that can be accessed by pressing a key when the manufacture splash screen appears. 

22 more replies
Relevance 43.87%

I just built a new computer about 2 months ago or so. It has run fine up until this point, It started with BSOD's but reinstalling windows fixed that and I have had 0 problems since.

This morning I turned on my computer, and all it showed was a black screen. no intiial beep before loading windows like it usually does. I restart the computer and this time i get the beep, but it just sits on the menu where it shows the stats of my computer hardware (also the menu where I enter bios). It freezes at this point and theres nothing I can do, I try entering bios, nothing. Restart computer, exact same problem. I gave it an hour or so and went back, and now i'm at the origional problem. I turn it on and it just sits there, without loading video, without beeping, and without the possibilty to get into bios.

It was running perfectly fine the night before, I didnt install anything new, or mess with any hardware. Any ideas?
 

Answer:Can't Boot PC anymore

seems I always seem to figure it out after posting here, and its always something stupid.

Somehow my USB external hard drive had fried either at that moment, or somehow magically last night. I tried to see if there was some sort of hardware problem and booted up the PC with just the PSU plugged in. I heard the beep. Excited i plugged in the monitor, windows was loading. after i plugged everything in I see the error "Windows was unable to recognize USB device" I restart my computer and it freezes on BIOS. Unplug the external HD, unfrozen. Going to leave the post up for anyone that just happens to come across a similar problem, but for me...issue solved.
 

3 more replies
Relevance 43.87%

I cannot turn on my PC. When I turn on the power supply it does a repeating, fast, high pitched, but quiet beeping sound (similar to some bird chirping). The power button on my PC doesn't respond at all, even the fans won't start. I tried disconnecting pretty much everything from my motherboard and adding more and more things slowly to no avail. I also tried out a new PSU but the same thing happens. If I disconnect the 24 pin cable, only then do I get a different sound (a continous high pitched sound). Before this I accidently plugged in the old PSU's FDD cable into one of the F_USB slots. Could I have killed my mobo with that? If not what could be the problem? How can I sort out if it's a bad mobo or something else?
 

More replies
Relevance 43.87%

Simply my computer has died!!!! Everything was fine one moment and the next I can't get my computer to boot. I'm running XP pro, have been since it was released. Never a problem till now. Cannot safe boot, cannot boot from any drive; floppy, cdrom, HDD, I am able to enter the BIOS but that doesn't help at all.
System details:
Intel D850gb 1.7gb; 256 RDRAM
Seagate Barracuda ATA IV 40GB HDD
LG GDR 8161B DVD rom
LG GCE 8160B CDR/RW
Nothing is new.

Message Error that appears once in a while:
Boot Failure: System Halted

Any suggestions?????
 

Answer:Can't boot up anymore

9 more replies
Relevance 43.87%
Question: Can't boot anymore

Alright, I've been having some trouble with this laptop.

I turn it on, no disk in the drive, and it eventually tells me: "Operating System Not Found!"

I tried putting in the restore disk and the OS disk to reinstall, but with either one, I just get a "No Hard Drive Found" message.

I really can't get any further than that. Any ideas, at all? All I know is: Things worked fine before he tried to clear some internet files (apparently).
 

Answer:Can't boot anymore

7 more replies
Relevance 43.87%

My Sat Pro M10 worked fine until yesterday. I removed the harddrive just to check Part number (as i need to install a larger drive and want to make sure I got it right)and then re-inserted it. Now it boots up as far as the XP Pro loading screen (black background) which disappears and then the screen goes blank. This is what normally happens during boot-up, except that there would be a cursor over the blank background for a few seconds until my desktop appears. Also, when it has stopped at this blank screen the harddrive light on the front of the laptop flashes regularly every few seconds. I desperately need some of the data on the hard-drive (and no, it is not all backed up) so I do not want to use the recovery CD which is just a ghost image (isn't it). The drive is formatted as NTFS. I mention this because when I tried to use the recovery disc to check disc integrity it gave an error message that said the NTFS logfile is not loaded. It will not respond to any of the F8 safemode-type options. I think I have messed up the booting up process somehow by removing the drive rather than physically breaking anything. it seems it can read the boot partition but no further. Can anyone suggest how to fix this, or worst comes to worst a way of retrieving the data from the disc?

Thanks and appreciation in advance,
Chris

Answer:Sat Pro M10 will not boot up anymore

Hi Chris

If the system runs stabile you can remove HDD so many times you want and it should have no any influence on anything. I have removed HDD from my Tecra very often and it still works well.

Back to your issue: if there is any possibility try to connect your HDD as external device to other notebook or desktop to see if you can see it and even back up all your important data.

All Toshiba notebooks, I suppose, since two years have NTFS and that is nothing unusual.

1 more replies
Relevance 43.87%

Hi everyone

I need some serious help here

The story is a little long
3 weeks ago, I had my computer working, and suddenly, it stopped booting windows, not even the logo show on screen, also no error code or anything. I couldn't enter diagnostic or safe mode (just bios). I had to format and reinstall windows 8 because any restore options worked.

Then a week ago, again it stopped booting, no error code, no anything, but this time, it bothered me that just 2 weeks before happened the same, so I started checking everything, so I took my Hard Drive, and put it in another computer, and it worked with no problem, windows booted, just not in my computer.

I started to look for solutions, and one was to use the command bootrec /scanos, and i got suprised that no windows installation was found. Eventually I had to speak with Microsoft tech, and they said it was my components because they were old, and they actually are (8 years), but I wasn't convinced that was it.

Before getting Windows 8 Pro, I had installed Windows 8 release preview, and it worked for months with no problem.

I thought that of course the fulll version would be heavier for my pc, so I installed Windows 7 again (had it installed for years before w8 release preview).

And now the bad part

after a couple of hours having the W7 installed, it won't boot either.

The same symptoms from W8, windows won't boot, not even the logo shows, although, with a little difference, now it shows a "Missing ... Read more

Answer:pc won't boot anymore

11 more replies
Relevance 43.87%

yesterday I installed a hardware that makes that you have four extra USB-ports (i push one in your computer and the hardware piece gives you for extra hardware ports (I can't really name it, because my english is quitte bad) and i installed the software that was on the hardware piece, and now my computer can't boot anymore.... a huge problem.... i can't even use safe modus because it stops ad the beginning screen were you can read: press "delete" for BIOS options... can somebody help me pleas

Answer:PC don't boot anymore

Take it out and reboot. If that doesn't fix it, use system restore to go back a few days when everything worked.

12 more replies
Relevance 43.87%
Question: can't boot anymore

Well, my wifes sony Vaio laptop just went kaput.
It was crashing while she was using large email files
and also doing some things on IE internet.
This started shortly after updating Adobe Acrobat.
Maybe the cause. We kept it working by turning some of the
services off, but now it says: \windows\system32\config\system
cannot be found.
And we can't even boot off our systen repair disc unless we choose
to erase everything off the C-drive. I have a hirens boot CD, but cant get it to boot
from that.
When we turn it on and press a key it beeps, and we get the choice
of F1 or F2.
F8 wont boot to safe mode either.
Is there any way to get this to boot in safe mode or from a disc so we
can repair or get some data off?

Thx
 

Answer:can't boot anymore

The CD-ROM needs to configured in the BIOS boot order to be first in the list. It may already be so in your machine since your recovery disk would have to boot that way.

If you can do that, you can try creating a bootable CD with the recovery console on it per my suggestion in post 6 here:

http://forums.techguy.org/windows-nt-2000-xp/454300-xp-error-driving-me-insane.html

The beep when you startup and the prompt for f1 or f2 may indicate a misconfigured BIOS -- you might look for an option to reload the BIOS/Setup defaults there, and see if that particular problem is resolved. It is different from the missing or damaged "system" hive.
 

1 more replies
Relevance 43.87%

So, my box was acting a little fragile lately - Stuff falling off my desk onto it would make it blue screen and load back up.
Naturally I opened it up and looked inside and found one of my RAM was a bit loose - It was in there most  the way, but out just enough so that the prong that holds it in wasn't in the slot for it. I pushed it in and secured it properly, screwed the cover back on, plugged everything in.
 
and now it won't get passed the DELL boot up screen. F2/F12 do nothing, and the loading bar freezes about a half way in. I'm running vista(naturally), all my peripherials are USB, but I don't think its the keyboard just not working that's causing the problem. I'm tried booting it with everything plugged in, and nothing plugged in.
 
any and all help would be appreciated.

Answer:Won't boot up anymore.

Can you boot into Safe Mode?
 
Start tapping the F8 key immediately after pressing the power button, this will open the Advanced Boot Options.  This will look similar to the image below.
 

 
Use the up or down keys to navigate to Safe Mode, then press the Enter key.

6 more replies
Relevance 43.87%

So I had some problems with AVG antivirus, when booting my pc got stuck on booting the avg processes, so I removed them, then it got stuck on some other processes (like fvevol.sys or so) so I removed them too. After removing all processes that got stuck when booting, I couldn't boot at all! Every time I booted it automatically came in the boot manager, saying it couldn't restore my pc. :(

How can I fix this? Please note that there's nothing wrong with my HDD, it's about one week old, all new. I also did not actually remove the processes, I transfered them to an USB stick.

And BTW, I still have acces to my HDD and bios
Thanks in advance :D

Answer:I can't boot my pc anymore?

Couldn't*
wrong*

sorry I typed this on a tablet, already corrected it

1 more replies
Relevance 43.87%

My son turned my pc off and now when i boot it won't get passed the bios logo screen (asus sabertooth 990fx) and the boot check led status lit on the mobo. If i detach the ssd i can not to a recovery drive and then reattach the ssd to try and fix it but nothing I've tried so far has worked -

Bootrec fixmbr success
Fixboot success
rebuilbcd shows c:windows as there but then says system device not found.

What does this mean?

Answer:Ssd won't boot anymore

WELL, you didn't say what SSD you have. BAD!
But, it sounds like you had the same experience that I had a few months back, when my three month old PNY SSD decided one day that it didn't want to work anymore. I called PNY, from whom I bought the drive, but they would not do anything without the original invoice. So I was stuck, with a worthless piece of crap that I could do nothing with.
I got right on my backup drive, pulled up Amazon.com and ordered a new "SanDisk, 128GB, SSD" and requested two day delivery.

Now it's several months later and my SanDisk SSD is still working like a champ. It came with the SanDisk Dashboard, which includes the "Trim" program to keep the SSD in top shape.

Sounds like you need a new SSD. I strongly recommend a "SanDisk" SSD.

Good Luck, and Happy Holidays!

TechnoMage

1 more replies
Relevance 43.46%

I have this big problem since I have received my P50 (at least for one year now). It is a 7600HQ machine with a Quadro 1000M video card. Let's say I start my day by turning on the laptop. The laptop boots. I see the Windows login screen. If I wait a little the P50 crashed very hard. The screen shows the artifact in the screenshot I have attached but sometimes I see an even color (like yellow) instead of the artifacts. The whole system is frozen. The lights on the keyboard do not react (num lock for example). So I hard reset the laptop using the power button and this repeats for around 10 times before it is booted correctly. And after this: the P50 is rock solid. It stays on for days at a time. Multiple VM's running, 32GB memory, M.2 SSD. Fully functional. So I thought it was Windows and installed Linux. This showed the exact same behavior. Some things to consider: 1. Only happens when I turn on the computer after some down time2. Once up it is rock solid3. Seems to happen more when I connect an external monitor (immediatly after connecting the cable). Both DP or HDMI show the symptoms.But I have seen it happen while using the P50 on my lap.4. All updates installed via the System Update app of Lenovo. Inclusing all BIOS updates5. Tried the hybrid or dedicated options in the bios for the video card. No change.6. It does not happen all mornings. Sometimes it boots up fine on the first try.7. Never happens in the BIOS or boot up screen. Only when the... Read more

Answer:P50 Hard crashes on boot or wake up

Look in the  event viewer and see if there is a message at the time of the problem?

1 more replies
Relevance 43.46%

I don't have an internet connection after boot up or after I wake the system up from sleep. This happens just about everytime, the troubleshooter have no problem fixing it every time. There is nothing wrong with the network as I still get a dial tone on the telephone.

Answer:No Internet Connection After Boot UP or Wake Up

  
Quote: Originally Posted by BruhthaKuga


I don't have an internet connection after boot up or after I wake the system up from sleep. This happens just about everytime, the troubleshooter have no problem fixing it every time. There is nothing wrong with the network as I still get a dial tone on the telephone.


BK

Could you tell us abt your network config and wifi/nic?

Ken

9 more replies
Relevance 43.46%

I have just purchased an HP Pavilion desktop from Currys to replace my old desktop running Windows Vista.  Although faster than my old desktop to boot up, it performs miserably when compared to my HP Envy notebook.  When left for a while it takes 90 seconds to wake up when my HP Envy and the old Vista desktop are instant. Comparing with the HP Envy, both are running the same version of Windows 10 and have the same memory.  The only difference is the processor.  The Envy has  an Intel 2.60 GHz and the Pavilion has an AMD 3.6 GHz.  Both have had McAfee disabled and the only different software running is my email client, Windows Live Mail on the Envy and Mozilla Thunderbird on the Pavilion. On initial power up the Envy shows the welcome screen in 3 seconds, the Pavilion takes 90 seconds.  Wake up from sleep mode is instant on the Envy but 90 seconds on the Pavilion (but only 4 seconds if it has 'just' gone to sleep). I expected similar performance so I am dissappointed with the Pavilion.  Does anyone else experience this slow response?  Are there any settings I can adjust?  Could it be Mozilla Thunderbird? Any comments or ideas will be most welcome,Thanks.

More replies
Relevance 43.46%

One of the computers here at work has a hard time waking up. It usually gives trouble even coming back from sleep mode when in Windows. You can move the mouse around for a good 2-3 minutes before it wakes up and the screen goes back to the desktop.

Also, I dont think this is related, but when the computer powers on or reboots, it sometimes takes a good 5-10 tries before you can see anything on the screen. You can hear it booting up by the normal computer beeps, but theres nothing on the screen. Ive already replaced the video card and cables. Also I checked the monitor. Its not any of those.

Its an older Gateway 1.2 Ghtz computer with about a gig of ram.

I dont think the two problems are related, but I may be wrong. Anyone? Thanks

More replies
Relevance 43.46%

Hi, My attempt to setup my X1 Yoga (20FQ) laptop to dual boot windows 10 and fedora 24 failed and I am not able to boot on windows anymore  More specifically I installed fedora 24 while already having a windows 10 setup. During the installation the fedora installation manager has configured the partitions for dual boot. The installation was successful but to my surprise the grub 2 entry for the windows 10 didn't work anymore.  I inspected the partitions and found that the windows are untouched. However the ' /EFI/Microsoft/Boot/bootmgfw.efi' file is missing from the boot partition. I think I need to recover it so that I am able to boot again to windows. Do you know how I can recover the file? I noticed that there was no windows 10 installation disk in the X1 packaging. Also what's the right setup for dual booting the two operating systems? Regards, Kostas  

More replies
Relevance 43.05%

Hi - I have Dual Boot on Leopard / Vista

I have not had trouble going between OS' but for some reason Vista has taken to starting with a Black screen (similar to the F8 screen)

Windows failed to start. A hardware or software change might be the cause.

To fix problem
1. Insert win install disc
2. Choose Lang
3. Choose repair.
etc
Safe Mode
Network
Command Prompt (advanced)
Start normally

Windonws will start in 30 secs..

After countdown it starts with the Loading graphic.... and then suddenly flashes up with a message I can't catch as it's too fast but I see a flash of the dreaded blue screen, Rebooting itself back to the Black screen.

I put the Vista Disk in and let the computer reboot but no change - fortunately holdong down Option allows the OS selection screen to appear.. this includes the Vista DVD in the drive.

If I select Vista the computer it would just keep on rebooting over and
I have a Seagate External Drive that was my Auto Backup drive... If I had to delete the Windows partition and redo Bootcamp, would that backup be any use?? Never had to do a repair like this.

Any suggestions????
 

Answer:Vista won't boot anymore.

Seems like you have a vista bootloader problem. Run your Vista DVD, after selecting language settings hit r to enter system recovery options. Click Startup Repair and go through the wizard. This should help with your boot problem!
 

3 more replies
Relevance 43.05%

Hello,

My PC:

Manufacturer: Acer
Intel Core Quad Q6600
2GB DDR II RAM
320 GB HDD (2x 135)
Nvidia GeForce 8500

My PC is 3.5 years old and had it shares of little problems like every PC, yesterday I got a BSoD, along the lines of "PAGE FAULT IN NON PAGED AREA". Had quite a few number of BSoD's before but usually I quickly found out the reason for them. Or some which I never found a reason for, but didn't not have any immediate effect on the computer.

However, this time when rebooting it would get to the screen where you can "start windows like normal", or some sort or Problem Fix. Which ever option you would choose it would loop (usually with a restart) back to that screen, sometimes also changing the language from my native language to English. I attempted to boot in safe mode, but this would not boot at all and more or less go back to the same options. Eventually the computer would be going to a screen suggesting to use the repair disc (Because windows could not be started) saying:

File: \Windows\system32\Winload.exe or various other files, for example at the moment it is a file called uliahci.sys
Status: 0xc0000221 (with the uliahchi.sys)
Info: Can not load windows because an essential file is damaged or missing.

I am currently stuck on this screen and I've tried various things, will list them below. Sometimes there will also be another screen popping up:
"The file header checksum does not match the computed checksum"

Things I've ... Read more

Answer:Vista, won't boot anymore.

Start by checking the hard drive for errors. You can use chkdsk or download one of the diagnostic tools from the maker of your hard drive.

7 more replies
Relevance 43.05%

Vista 32
4gb
500gb HD
Nvidia 9800 GX2 1024
Q9600 2.6ghz

I've been up all night trying to fix this..

So I have been having issues with installing WOW and AOC due to memory issues, I was getting blue screens that said
MEMORY_MANAGEMENT

so I downloaded memtest and prime95 to diagnostic the problem, will it reported back that memory slot 1 had 410 errors, but I was having problems isolating if the it was a bad slot or bad stick. So I ran prime95 torture test and during the test I received a bluescreen and it came up and went away so fast I couldn't notice the error so I had to reboot.When the computer came back up it started going extremely slow, so I decided to reboot into safe mode. It took roughly like 10 mins to just see the windows logo then another 10-15 mins to get to log in screen then another 10 mins to type my password then another 20 mins to see my desktop and this was all done in Safemode.

So now I rebooted again, this time I would get black screen for like 30 mins after Windows logo. So I decided to just re-install Vista it took a very long time to get to Vista re-install screen and next think you know it I get blue screen with the following error

DRIVER_IRQL_NOT_LESS_OR_EQUAL
nvstor.sys address 863e9395 base at 863e50000 DATAMAP 46671a61

So then I figured it was dvd drive I was install from so I unplug the defective drive and used my 2nd dvd and run install again, this time I managed to install Vista took roughly 3 hours, and now BINGO re-i... Read more

More replies
Relevance 43.05%

Hi Guys. I really need your help.
I have 3 drives. Vista installed on primary boot drive (C. Everything used to work fine until I installed XP on my second bootdrive (D.

In fact, when the XP installation finished and the system was booting up for the first time, it really creeped me out with some weird non-standard characters on the post screen. For a sec I felt my BIOS is messed up or something...

It didn't even let me boot into XP until I set D: as my priority1 boot device. XP now boots fine (although it feels like it's taking a lot longer than usual) but when I switched priority1 boot device to C: my system hangs at the "Verifying DMI Pool Data" message.

I then booted back into XP and tried different tools like VistaBootPRO and EasyBCD to fix my boot files but nothing works. I can still read files from my all drives whilst booted into D: (XP) so thankfully my C: is not dead but if anyone has any experience in this area, I would very much appreciate your help.

What I want is to have some boot option at system startup to boot into either Vista or XP, simple (or not so simple) as that.
 

Answer:Help! I can't boot into Vista anymore!!

14 more replies
Relevance 43.05%

I have been using Windows 7 without issues or at least no issues that cause me to be at a downer like this one since I started using Windows 7.

This is the biggest and most ***** situation I been in.

I need your help.

My last option is re-installing Windows but I'm 100% sure that this is not required to fix my issue.

It all started today around 1 PM, now 8 hours or so ago when I was backing up my C drive with the program:
Macrium Reflect FREE Edition - Information and download


It froze for some brief moment the first time I switched been my admin account and user account but the second time I was done for. I had my cursor visible and a black screen and that is not changing for hours.

Why did I do this? Because I was trying to fix: I tried enabling hibernate function but no luck


So this is all related. I think I should never have switched between accounts and let the system take the backup I was doing.

Anyway when I try to start up I got now through advanced booting:

status: oxc000000e

My boot system is messed up.

I'm now using my windows disc and:

Rajan : Computer Blog: How to Create a Clean BCD file to fix Windows 7 Boot problem

Some of these commands don't work.

I got a system repair disk of February but I had no luck using that. I got a backup made some days ago on a remote hard drive, I got a system image made some tome ago but all of these I cannot use!!!!

It doesn't list them and I don't know how to use them with my situ... Read more

Answer:Can't boot my windows anymore

General Rules;

3) No spamming, advertising, selling, or promoting products or other sites.

Here is a copy of the rules.

Windows 7 Help Forums - Forum Rules

9 more replies
Relevance 43.05%

Hey all,So My Windows XP would only boot up in safe mode so I thought of doing a system restore.I went into Bios and set the the computer to boot from the DVD drive since I have a restore dvd. Now my computer won''t boot at all. I think my dvd drive is damaged because I keep hearing it spin but nothing happens. My screen is just black and cpu beepsonce then 5 beeps in a row. Im guessing its trying to boot from the dvd but cant.I do have an external dvd reader if that helps.I just wantt to get back into BIOS and boot set it to boot from my external reader. Any help is appreciated.is my only option to purchase a internal dvd drive. cuz i already have an external so i dont want to buy one if theres another way to reset bios.

Answer:Computer Won't boot anymore

Did you mess around with the RAM sticks? That beep code might indicate a RAM problem.Beep codesThe three most important things in computing:1. Backups, 2. Backups and 3. Backups.

3 more replies
Relevance 43.05%

I had a clean pc, no virusses. I've booted, watched a movie, virus notifications popped-up. Healed and everything, but suddenly blue screen: Hard error. When boot: windows can't boot. Repair tool etx, but didn't solved it.

I can't get into safe mode, restore point is corrupt, backup made with another tool, don'thave the disk here...

I'm kinda desperate about how i can fix this :S

thx, Bert

Answer:can't boot anymore. ci.dll corrupt

You are the second person I've seen with this problem in a week wonder what's going on.
Anyhow last time this fixed it.
SFC /SCANNOW Command - System File Checker

ci.dll is the code integrity module. ... very important. The secure file command should fix any possible corruption with it.

7 more replies
Relevance 43.05%

After clocking my CPU from 8X to 12X in the BIOS setting, my computer would not boot up anymore. It does not beep or run a POST (power on self test).

Note: It is a 8-bit KT7 RAID Motherboard and 800mhz Duran processor.

How can I reset the BIOS setting??

Thanks in advance,
Charlton
 

Answer:Computer will not boot up anymore

Hold the insert key down while you power up, it sets abit's to default processor, then go in the bios and reset the processor speed.

In other words, hold down the insert key, push the power button on, and keep holding the key until you start to boot.
 

2 more replies
Relevance 43.05%

Here's the deal. I have a custom PC that runs Windows 7 Ultimate 64 bit and it has worked fine since I built it a year or so ago.

The other day, I reformatted my mom's hard drive for her. It is a SATA II HDD, I connected it to my motherboard, booted to the Windows XP Pro 32 bit disc, reformatted her hard drive, and installed Windows XP Pro 32 bit on it.

After removing her hard drive from my computer, my system is no longer useable. Windows 7 will not boot at all. Insterting my Windows 7 disc and trying to repair the install does not work at all, the disc shows my Windows 7 installation but if I try to repair it it simply says it's the wrong version for the disc, which is absolutely false.

How on God's earth do I fix what I have done? I am ready to dump this thing forever and buy a laptop.
 

Answer:Windows 7 will not boot anymore

Your mistake was to allow the XP install to see your Win 7 as it booted up for the first time. At that point the system was seeing two drives both with the Active flag set and has probably written an XP style MBR to your Win 7 disk and XP was using that to get started. When you put the XP disk in another computer it almost certainly won't boot either.

The damage is only to the MBR and possibly the PBR and should be repairable but you need access to an expert to carry it out. Bit beyond my abilities I'm afraid.
 

3 more replies
Relevance 43.05%

1. running xp and encrypting some files.2. then insstalling Win7 on the same partition.3. now cannot open encrypted files in Win7 4. Also cannot boot into xp anymore5. How to boot / load xp ( previous os) once again

Answer:Can't boot into XP anymore after installed W7

You installed XP and then Windows 7 into the same partition?In this case it is to be expected that XP is inaccessible since it no longer exists. Two operating systems cannot share a partition.Files encrypted with one installation of Windows will be inaccessible with another, even if the user name and password are the same. Unless you took the proper precautions, such as backing up the encryption certificate, these files will be unrecoverable except by advanced and very time consuming methods.The best way to dual boot XP and Win 7 is to install XP first and create a separate partition for Windows 7 and install it there.

2 more replies
Relevance 43.05%

I've only found one reference to my problem and that was on this site in the wrong forum. I haven't found any answers, though.
My IBM 600 laptop has decided it doesn't want to boot anymore.
Instead I get an error 127 message after it tests the memory and reports the 228800KB's OK.
In testing the components from the dialog box that opens I get an "DEV 001", "ERR 42", "FRU 1110" message when testing the systemboard and testing the memory causes the machine to freeze up. Everything else tests OK.
The situation is the same regardless of whether I use the onboard battery or the AC adapter. It's the same regardless of whether I use the HD or my emergency boot floppy.
I've replaced the CMOS battery and reset the date and time.
The machine is identified as type 2645-45U, serial number 78-KNR91 05/99
The platform once booted is Win98SE.
The bios is IBET39WW and the CPU is a Pentium II at 300mHz
The motherboard is model number FC/01/00
I'm going to keep poking at the problem but I'd sure appreciate it if someone could give me a leg up on what to look for.
Thanks in advance.
 

Answer:IBM 600 127 error, won't boot anymore

This is nearly always a sofware error, meaning requested procedure cannot be found or is caused by very big file tables The size of the data file is actually the main culprit.
But you can see it in a PC when the hard drive becomes defective, or memory goes awry.
This is a serious error requiring some real work. Test your memory and hard drive in an enclosure or another machine.
If the hard drive is older than two years, consider replacing the drive and rescuing the data from the old drive in a USB enclosure.
But since you have already tried everything, you can learn from the Thinkpad forums that old 600, 600E, (not so much 600X) boards fail, and give this error as they do... or the cpu fails... check the fan on your cpu to be sure it is able to cool.
 

6 more replies
Relevance 43.05%

my son installed a demo disk from a cereal packet! it contained demo version of "who wants to be a millionaire" and a trial version of aol on it. pc gives message at boot up "hard disk failure" aaarrrgh! will boot to a: from start disk but when attempting to change to c: reports "drive not recognised" or something similar any ideas on how to fix please?
Thanks ETS - I am running win95 osr2. I have tried BIOS setup but to no avail as it doesn't recognise the hard drive from auto-detect. I will find out which BIOS is in the machine and report tommorrow.
BIOS is an Award Software Inc. rom/pci/isa (2a59IMZA)

[Edited by rick cousins on 03-29-2001 at 08:40 AM]
 

Answer:pc won't boot from c: drive anymore

rick cousins
Have you tryed booting into safe mode and using the restore feature.
Since I don't know what operating system your using I can't be more specific.
Keep tapping the f8 function key at start and select safe mode and hit enter.
 

3 more replies
Relevance 43.05%

Hey Everyone,

So here is my problem. I recently deleted a partition on my second hard-drive that had Linux on it. Now my windows won't boot. I found out that my MBR got corrupted some how through deleting the partition. I tried using windows repair, but its not even detecting windows 7 on the HD. I tried going to ASUS to DL the drivers to load up but nothing is working. I am not sure what to do here. Anyone know if maybe i need to mess with the bios or is there a specific driver to load up in repair.

Answer:Can't Boot Windows 7 anymore!!!!

Try this:





Quote:
MBR
boot to the windows install disk, and at the install now menu type shift+f10
then type the following commands one at a time and press enter after each one:

bootrec /fixboot
bootrec /fixmbr
bootrec /rebuildbcd
exit

then shut down, restart and your problem will be solved

9 more replies
Relevance 43.05%

Hey guys,
 
Today I recently watched a video and it was saying to record with your nvdia gpu in 60fps without ruining gaming experience you use shadow play.
 
I enabled shadow play and then 5 minutes later my pc crashed and restarted it self. I said ok no problem. It then says starting windows and then boots into a black screen I can see my mouse cursor. 2seconds later the screen goes grey, 10 seconds later the screen says "no input found" and my monitor turns off, 15 seconds later my pc restarts again. This problem has never happened until I enabled shadow play. I can boot up in safe mode (which Im in now) but I can't open nvdia to disable shadow play. I tried uninstall nvdia geforece experience but with no luck its still happening. I've tried restoring my pc. Should I fully uninstall my graphics driver or is that not the cause?  I don't know how to find crash logs. PLease someone help me 
Kind regards,
Ahmed
 
 

Answer:MY PC WONT BOOT ANYMORE HELP PLZ

SOLVED: drivers screwed it up. full uninstall fixed it. 

2 more replies
Relevance 43.05%

Hello,

I'm having a problem with booting into my Windows 7.

I have 2 HDDs. Disk A has a size of 1TB while disk B is 300GB.
Disk A has 1 partition, with Windows 7 x64 installed. I've been using it for months now without any problems.
Disk B has 2 partitions. Both partitions were empty, though they were both formatted, one being 100gb and the other one being 200gb.

Now I installed Windows XP on the 100gb partition (Disk B), thinking it wouldn't give any problems as both OS were on different hdds. After I installed Windows XP, I couldn't boot into Windows 7 anymore. I selected Disk A to be the first boot device in the BIOS, but it still wouldn't boot into Windows 7. I forgot what it actually said when I boot though, stupid me
Booting into the newly Windows XP didn't give any problems.

Then I tried to fix it by installing the Boot Manager of Paragon Partition Manager (stupid me again ). I obviously installed it inside Windows XP (the 100gb partition of Disk B).
I tried to boot into Disk A with Windows 7 again, now it loaded the (Paragon)Boot Manager. It only shows "Windows XP", and nothing happens when I press enter.
I really don't get how this happened, since I installed the (Paragon)Boot Manager on Disk B, but it appears when I try to boot into Disk A.

Then I tried to repair it by using the Windows 7 installation disk. I tried "Repair Startup Problems", or something along those lines. It hasn't seemed to chan... Read more

Answer:Can't boot into Windows 7 anymore

When you do something like that you set XP to blow away the Windows 7 mbr unknowingly.
You need to install the older OS first so that Win 7 would have booted both. Use of Vista BootPro should boot them both if Paragon didn't destroy the Win 7 partition. I don't trust anything they make after a few beta tests really went south on me.
http://www.vistabootpro.org/
 

2 more replies
Relevance 43.05%

Hi all,  as you can see, I have an old HP Desktop Model but it ran well so far... http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c02575960 usually during the night, I put the PC in Power Safe mode by clicking the function key and 2, so the PC goes down into a ?sleep mode? and the led power button on the top front right of the tower changes from blue to amber.To reanimate the PC, I just have to move the mouse or press a keySo, I did the last time, the power button changed to blue again, I could hear the HD spinning, the fan as well but the screen stayed black.After a few minutes, I pushed the power button as long, until the PC turned off.Now, when I push the power button again, the HD starts spinning (but it sounds terrible ?), the fan starts as well BUT der power button has no light.This status won?t change after 1 hours?I found one post, which describes problems with that motherboard?http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/n-alvorix-rs880-uatx-alvorix-mot...Is there any help or am I lost?Best regards, Rolf

More replies
Relevance 43.05%

Hi all,

I have a Dell 8100 PC running Windows XP Pro/Sp2 with a internal IDE Benq CD-RW drive as the 2nd device on the cable. The 1st device is a Pioneer DVD-RW writer.

I can read CDs okay from the CD-RW drive but all of a sudden I can NOT use the CD-RW drive to boot up system! Last time I tried was probably 3-4 months ago.

I go to boot menu as system is starting to boot up and select IDE CD-ROM Device -- system Beeps twice then it says:
"Strike F1 to retry boot, F2 for setup utility". I hit F1 -- same thing!

Drive is listed as okay in device manager.

I have double checked devices in BIOS, all is okay. Even set CD drive as first boot device there, but after saving setup and rebooting - system still boots from HDD with a bootable CD in drive! Even tried a Ubuntu live CD and same thing happens.

Does anyone have any idea what problem might be and the resolution

Thank you very much!
Sincerely,
Cin
 

Answer:Can't boot from CD-RW drive anymore

7 more replies
Relevance 43.05%

Hey =)

My screen randomly froze yesterday (stayed locked, couldn't move mouse or anything) and now W7 is stuck at "Starting Windows". The little icons won't appear and it stays stuck there for hours.

In safe-mode it gets stuck at CLASSPNP.SYS and locks.

Trying to reinstall doesn't work, it just reloops. I tried with another HDD, with new RAM, with another Video-Card, reset CMOS, nothing works.

Surprisingly, I can boot up Ubuntu just fine atm, no problem whatsoever.

I had this same issue when I had Windows Vista....anyone able to figure out what's happening?

Answer:Can't boot or Install anymore.

Press F8 until you can see the option to see safe mode with command prompt, then type rstrui.exe

5 more replies
Relevance 43.05%
Question: wont boot anymore!

Dear CH! Im ripping my hair out! About two weeks ago i decided to instal and old game Toca race driver 3 on my machine! Its running windows 7 Ultimate. anyways. The program asks to restart the computer and so i did. now i get this screen: (sorry i cant post a photo but its exact wording)                                                                                       Windows Boot ManagerWindows failed to start. A recent hardware or software change might be the cause. To fix the problem:1. Insert your windows installation disc and restart your computer.2. choose your language settings, and then click "next".3. Click Repair your computer.If you do not have this disc, contact your system administrator or computer manufacturer for assistance. Status: 0xc000000finfo: the boot selection failed because a required device is inaccessible. this has happened before but then i just did a format and reload. Thats most likey what ill be doing again but i want to know what is causing this. now i put my win 7 dvd into the drive and it shows the windows is loading files screen and then the computer restarts.... I have XP 64bit on a dual boot but for some reason i no longer can open firefox on it.... Is this a possible hard drive failure or curruption? what tools... Read more

Answer:wont boot anymore!

http://answers.microsoft.com/en-us/windows/forum/windows_other-gaming/cannot-run-toca-driver-3-on-windows-7/aea5fd60-cafd-4d12-8b24-7f287bb758b7This program is not Windows 7 compatible, so you will likely need to repair Windows 7 and avoid using it on 7.

1 more replies
Relevance 43.05%

Hi all !

I used to create USB boots using the Program Ultra Iso and boot and install windows with my USB flash.

but this time it isn t possible.

when i choose to boot from USB, a black page comes, giving the message :

start booting from usb device ...

but it remains on this page and nothing further happens.

I tried the same flash on another system and it booted completely.
it shows that the USB is written correctly and it must be something wrong with my system.

Thanks for your help !

Answer:I can t boot from USB flash anymore

  
Quote: Originally Posted by mj2000


Hi all !

I used to create USB boots using the Program Ultra Iso and boot and install windows with my USB flash.

but this time it isn t possible.

when i choose to boot from USB, a black page comes, giving the message :

start booting from usb device ...

but it remains on this page and nothing further happens.

I tried the same flash on another system and it booted completely.
it shows that the USB is written correctly and it must be something wrong with my system.

Thanks for your help !


USB stick boots fine on another machine? Try another usb port

9 more replies
Relevance 43.05%

Hi,

I have an HP laptop with 3GB of RAM

installed with vista ultimate 32 bit


out of the blue it began to complain it cannot boot anymore, not even at safe mode.

I get

error
0x0000007E with 0xc0000005 parameter


I tried repair from the setup cd but it could not fix it

I tried to use the command promt from the repair cd and saw my C drive mounted with all my files there.

some sort of a driver is doing that - I think...

but I have no idea how to figure out which one...

all the threads I found relay on me able to boot in the system to do things which I can't right now.. I can only access the files from outside..


can anyone help ?


thanks

Answer:Vista won't boot anymore

hi and welcome to TSF this is what i could find on your error code
0x0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
(Click to consult the online MSDN article.)
A system thread generated an exception which the error handler did not catch. There are numerous individual causes for this problem, including hardware incompatibility, a faulty device driver or system service, or some software issues. Check Event Viewer (EventVwr.msc) for additional information.
?0x0000007E, 0xC0000005, 0xFC5CCAF3, 0xFC90F8C0, 0xFC90F5C0? Error Message at Startup {KB 321637} Win XP
0x0000007e Error When Registering OLEMSG32.DLL or CDO.DLL Files {KB 238265} Win NT, Win 2000
0x7E Error Occurs in Kbdclass.sys When You Try to Shut Down Win XP {KB 313050} Win XP Professional
Error message in Win XP Service Pack 2: ?Stop 0x7E? {KB 900485} Win XP SP2 (Timing issue ? patch available)
Stop error 0x7E in PCI.SYS {KB 839641} Win 2000, Win XP, Server 2003
Stop Error 0x7E in USBHUB.SYS {KB 327863} Win 2000, Win XP, Server 2003 (If USB bandwidth consumption exceeds 100%)
?STOP 0x0000007E? Error Message After You Upgrade to Windows XP {KB 330182} Win XP
?Stop 0x0000007E? error message when installing Win XP Disk Image from a Remote Installation Services Server {KB 818966} Win XP
?Stop 0x0000007E? error message after you upgrade to Win XP Service Pack 2 on a non-Intel-processor computer {KB 888372} Win XP SP2
After installing Win XP SP2 or Win XP Tablet PC Edition 2005, your computer restarts co... Read more

6 more replies
Relevance 43.05%

I installed windows 8 earlier today and it ran fine, then when restarting to finish windows updates it went to a black screen that ocassionaly flashes and I could move my cursor around. It always does now and I can't enter safemode, I do not have a windows 8 cd as I did their download upgrade win 7 to win 8 deal.Saber tooth p67 motherboardI2600k processor16 gb ramGtx 580 Zotac 3 gb cardTitanium fatality sound cardVelociraptor digital western 500 gb hard drive G19 keyboard and g9x mouse Help please.

Answer:Windows 8 won't boot anymore...

I have not run into that yet but I would try booting to the Windows 7 DVD and run startup repair, otherwise I think windows 8 also uses the small partition at the front of the drive to allow you to boot to the repair utility.Good Luck,Mike

1 more replies
Relevance 43.05%

Hi,
I have windows 7 operating system installed in my notebook. But suddenly my notebook is not booting anymore. I do have a backup image saved in a external hard drive, but can not install windows from there.
How can I re install windows 7 as I do not have a backup DVD.

Can anyone help me out?

Answer:Windows 7 does not boot anymore

Hi, The save image backup on the external hdd won't help you. You have to options now:

1 order a recovery disk backupmedia.toshiba.eu/landing.aspx
2 Get Win copy disk and make a custom installation. All Toshiba drivers are available http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

Btw, what about hdd image (F8)? Maybe , you can restore the factory settings with F8 on startup........

2 more replies
Relevance 43.05%
Question: Wont boot anymore

My vista laptop wont boot
 
When I press the power on button, I get the post check and then it restarts and just keeps doing the same cycle
 
When I put my vista disc in and boot from disc, the moving green bar comes up on the bottom, the hard drive light stays on but it never loads.
.
I cannot get into the F8 menu
 
Last night it was booting diffrent. It would do the post check then come up with the 'Windows cannot start screen' and give the option to repair or start windows normally. No matter which one I pressed, the computer would restart and bring the 'windows cannot start screen' again in a constant cycle.
 
Help needed urgently
 
 
 
Ps - Is there anyway of forcing a system restore?

Answer:Wont boot anymore

What is the make and model of this computer?
 
What kind of disc did you use,eg installation disc?

4 more replies
Relevance 43.05%

Hi peeps, I have a problem with my old AMD 800mhz wich wont boot anymore. This morning when I came to this computer, I noticed it was making no more noise, no fans, nothing on the screen etc... and there was only the power led that was blinking on and off all the time. I turned the computer off by holding the button a bit and tried to boot it up again. nothing.

The power supply work, the power button too obviously since I turned it off, the MB inside led is open... but nothing happens.

Whats should I do?

its a k7v via chipset motherboard slot A with a 800mhz processor, scsi hard drive and all...

im really clueless on this, and the asus website dosent seem to have anything concerning this trouble

Answer:Wont Boot Anymore!!!!

could it be the lithium battery that blew off?

btw just to mention, I never OCed this rig, and the fans did all work well. I used it as my file server for over 2-3 years

7 more replies
Relevance 43.05%

Hello guys,

After running windows update on win8 it asked me to reboot, after applying the updates upon reboot i get a black screen where I should get the login screen.

Also if I try to press F8, it displays "getting options..."(or something like that) and when it should load the options screen I get just a black empty screen that stays there forever.

Another funny thing is that my dual boot is gone, i cannot boot back to my win7 so i have pretty much an unusable computer...

thanks for any help

Answer:Cannot boot in Windows 8 anymore

Try run the Recovery options from the DVD:
http://www.eightforums.com/tutorials...ndows-8-a.html

7 more replies
Relevance 43.05%

I've just finished assembling my first computer, and tried installing windows 7 ultimate x64 on a blank samsung 256gb SSD from an 8gb usb stick, but I got an error on the second step at 1% saying "Windows cannot install required files". I pressed OK and restarted, I get a message saying there's nothing to boot from. Obviously, I made sure the USB was top priority as a boot device.

Any help with that..?

Here's some information about the stuff:

-The components are here:Intel Core i5-4690K, MSI GeForce GTX 970, Fractal Design Define R5 (Black) - System Build - PCPartPicker Canada
-I used Rufus to get windows 7 ultimate on the usb as a bootable device. I kept everything by default once that was done, so MBR for bios/uefi,NTFS ( I think), 4096 and quick formatting, no bad block verification.
-The HDD was unplugged
-I used a usb 2.0 port

The error itself happened on the installation screen, after the screen forselecting to choose partitions and whatnot, as the files were being copied.

This was my first build, so maybe this could be hardware-related somehow. Thank you!

Answer:Win 7 Boot USB first detected, but not anymore?

Put your iso file on the usb stick again using this program, it never fails me.

WiNToBootic bootable usb drive windows vista/7/8 - Bootable USB | Bootable USB

And make sure you didn`t change the boot order in the bios, or else the usb stick will just keep booting over and over again.

Use the boot menu to choose the usb stick 1 time and that`s it.

1 more replies
Relevance 43.05%

Hi. Although I jumped in on this thread I felt afterwards that it maybe better to start a new thread with this issue.

http://forums.techguy.org/windows-vista/966631-disk-read-error-occurred-after.html

From about 3 wks ago when swiching on my laptop I find now that I am unable to get past f10. While on the f10 options I have tried the HDD Self-tests both short (2mins) and the long ones(37mins) and they both passed, not to sure in what that means. My laptop is a HP compaq nx9105, running winXP Pro. At the moment I have no clue in what is going on but really feel that the issue could point to a failing harddrive, although both "Self-tests" passed. If anyone has more knowledge of this particular issue more than me I would appreciate that very much, before spending out on a new hard-drive, i.e a particular CD, recovery, boot, diagnostic or other that may help.

At two stages after switching back on I did manage to get past the "a disk error has occured" and got to the "Checking file system on C: The type of file system is NTFS" to in the middle of checking or so "an unspecified error has occured", if that is a clue to anything. Also after switch-on I find that I can sometimes get the "start windows normally" DOS pop-up and then the windows XP logo, but continually loops between the two, if that helps. Thanks for your time and best regards
 

More replies
Relevance 43.05%

My computer had a little problem with it a couple of days ago and I thought that I could fix it by doing a "SYSTEM RECOVERY" on my computer (because it worked before). Well I did the system recovery and it seemed to be working just fine until I clicked on "Finish". Then after that it seemed to take a really long time to load then it went to a blackish gray screen and there was just a little error message that says " The System is Not Fully Installed. Please Run Setup Again". Then I click "OK" on the error message and it re-boots my computer and then says it is loading Windows, but then it just goes to the same error message, EVERYTIME! I have tried pressing F10 while booting and I have did the System Recovery again by doing so and it does the same thing. Please help me out! I really really would appreciate it!! Thank you all so much!!
 

Answer:Will Not boot Windows XP anymore!!

I would check to see if my restore disk could do an XP repair...
 

1 more replies
Relevance 43.05%

Hi all !

I used to create USB boots using the Program Ultra Iso and boot and install windows with my USB flash.

but this time it isn t possible.

when i choose to boot from USB, a black page comes, giving the message :

start booting from usb device ...

but it remains on this page and nothing further happens.

I tried the same flash on another system and it booted completely.
it shows that the USB is written correctly and it must be something wrong with my system.

Thanks for your help !

Answer:I can't boot from USB flash anymore

any help ?
 

1 more replies
Relevance 43.05%

Hello everyone

I recently ordered a new cpu fan (which I have replaced since bearings shot in old one and making lots of noise), for a AMD Athlon (K7) Socket A processor and now the new fan runs quietly but pc will not boot (the mobo is K7 Triton series GA-7VKMP). If I put the old fan back on windows boots no problem. I put the new fan back on and PC hangs and won't let windows boot. It hangs before it starts looking for boot order.
It says that system health is ok and processor ok but it hangs an will not boot to windows. If I try to get into BIOS nothing happens it still just hangs.
The new fan is A.M.B. Model FD06010 Ball Bearing DC 12volts .28Amps.

Anyone have any ideas.
Thanks for any help with this issue.

Thanks

Answer:replace cpu fan but pc won't boot anymore

sounds like the fan is not supported by your motherboard. You can try getting a Molex power adapter converter and plugging the power of the fan into the adapter and using one of the Molex connectors on the PSU. However, your motherboard Bios might report that the fan is not connected. I would find a CPU fan from your motherboards site that is compatible.

3 more replies
Relevance 43.05%

Hi people

I have a tecra A4 and started experiencing start-up problems after shutdown. the laptop would take 15 minutes to allow me to restart it if i was starting it straight after i shut it down. when i press the button to start it up it would take 2-3 seconds then just shut down with the hard-drive making a little 'clunking' noise as it did it.

I ran a recovery disk which just screwed it up all together, it just simply would not start at all after that! (just kept shutting off after 2-3 seconds). Sooooo I went out and bought a new HD. I put the hard-drive in and started installing windows again. it got to the part of putting the files into the installation directory. i think it got to 100% but then shut off again. now it wont start-up again!!! It does the 2-3 second thing :-( The difference is that there isn't the 'clunking' noise anymore. just a quiet shut-off as though its losing power somehow before it accesses the hard-drive

Any idea what the problem is here?

Cheers

Answer:Tecra A4 does not boot anymore

Hi

It is really not easy to say what is wrong there. my first thought was overheating. Tecra A4 is pretty old notebook model and maybe is shuts down because of overheating.

Can you enter BIOS settings? If yes please enter BIOS settings and leave it. Please let me know if notebook switches off again.

2 more replies
Relevance 43.05%

I recently left my PC in my flat for the summer and when I came back to it 7 weeks later to turn it on Windows XP wouldn't boot up.

I turned on the PC and the Windows XP Home loading screen came up but it was all funny colours and then after that screen where it usually asks me for my password the screen just went black except for some strange lines of colours across the screen. At first I thought it was the monitor but I have since tried that on someone else's PC. The PC will now occasionally boot up in Safe Mode but that only happens once every 10 trys or so and when it does it still has the strange colour scheme all over the monitor. I have no idea what could possibly be wrong whether it be a loose connection in the machine or something. Any sort of help on whats wrong will be greatly appreciated.
 

Answer:Windows will not boot up anymore.

Well, if it's not the monitor, it's probably the graphics.
Do you use a graphics card or intergrated geaphics?
 

3 more replies
Relevance 43.05%

I've got this problem. For a while now, While I've been on my computer, windows just reboots. The reboots started becoming more and more annoying until I asked for help from bleeping computer:

http://www.bleepingcomputer.com/forums/topic466596.html/page__st__45__gopid__2830160#entry2830160

Then things got worse. Now I have to boot in safe mode, or else my computer shows... Nevermind, for further information look in the thread and ask me if you need explanation. Please, hurry, I will have no computer for a day starting in a few hours cuz i'm going somewhere and I really want to show my friend something in my computer that I can't show him in safe mode.
 

More replies
Relevance 43.05%

I can't boot into Windows XP home anymore after I (foolishly) removed a new version of a program called magic folders (used to hide folders) and tried to install an older version of it which didn't work. I then tried to reinstall to new version but after rebooting I find instead of getting into Windows all I get is a black screen! I've tried to use the Last Known Good Configuration from the boot menu which also gives me a black screen. I have also tried to get into Safe Mode where I can do a system restore but all I get is a DOS screen with the following :multi(0)disk(0)rdisk(o)partition(1)\WINDOWS\System32\ntoskrnl.exemulti(0)disk(0)rdisk(o)partition(1)\WINDOWS\System32\hal.dllmulti(0)disk(0)rdisk(o)partition(1)\WINDOWS\System32\kdcom.dllmulti(0)disk(0)rdisk(o)partition(1)\WINDOWS\System32\BOOTUID.dllmulti(0)disk(0)rdisk(o)partition(1)\WINDOWS\System32\Config\Systemmulti(0)disk(0)rdisk(o)partition(1)\WINDOWS\System32\C_1252.nlsmulti(0)disk(0)rdisk(o)partition(1)\WINDOWS\System32\C_850.nlsmulti(0)disk(0)rdisk(o)partition(1)\WINDOWS\System32\C_intl.nlsmulti(0)disk(0)rdisk(o)partition(1)\WINDOWS\FONTS\vgaoem.fonmulti(0)disk(0)rdisk(o)partition(1)\WINDOWS\AppPatch\drvmain.sdbmulti(0)disk(0)rdisk(o)partition(1)\WINDOWS\System32\DRIVERS\ACPI.sysmulti(0)disk(0)rdisk(o)partition(1)\WINDOWS\System32\DRIVERS\WMILIB.sysmulti(0)disk(0)rdisk(o)partition(1)\WINDOWS\System32\DRIVERS\pci.sysmulti(0)disk(0)rdisk(o)partition(1)\WINDOWS\System32\DRIVERS\isapnp.sysmulti(0)disk(0)rdisk(o)partiti... Read more

Answer:Help - I can't boot into Windows anymore !

Looks like its time for a clean re-install to me.

9 more replies
Relevance 43.05%

Well this is actually my friends problem but wat happened was that he left computer on last night and came back in the morning and it was frozen. So he restarted it and nothing appears on the screen! He reset the bio too and it was still the same result. He checked all the connection but nothing really changed anything. When you turn on the power, the psu does run. It just doesn't show anything on the screen.
any suggestions????

WE did check the connection!

Answer:Computer does not boot anymore!!!!

well did you switch monitors?

4 more replies
Relevance 43.05%

i have been working at this for a week and i was finally referred to you guys by a friend of mine. my problem started about 2 weeks ago. i had turned my computer off for the night and the next morning i went to turn it on again and it took about half an hour to boot (no joke). i started it in safe mode and it froze up after it loaded crcdisk.sys so what ever comes next is the problem but i don't know what comes next. i first though it could be a hard ware problem but i changed out almost all the parts and it still won't work. i tried to reinstall vista because this was becoming annoying having to turn on the comp 30 mins before you need it but, the vista disk isn't damaged but it still didn't work, so it must be a driver or something like that. i put in my motherboard disk to install the drivers and it didn't work and i reset my CMOS and that didn't work either. it will get through the whole install and again get to crcdisk.sys and then crap out any help you have for me would be great i have pretty much been defeated on this one. thanks - Matt
 

Answer:i can't boot to vista anymore

I can think of quite a few things that may be going on. Have you tried the steps posted here: http://support.microsoft.com/kb/929135 ?
 

2 more replies
Relevance 43.05%

Well, I now have an unbootable computer. I don't know what's wrong. When it tries to boot, it gets a BSOD, and it goes by too fast for me to possibly read it. I heard you can change this option by getting into a special menu with F8, but F8 doesn't do anything for me. I heave the option of loading Startup Repair, too, but its SLOOOOOOOOOOOOW! There's no way this can be right! (Maybe I need to put the harddrive on an eternal reader and grab the dumps.)

Prior to this, the OS was laggy. I was playing music with Winamp, and it k.....ept pausing. Prior to that, I had a mess where all the programs became unresponsive and I had to force a reboot. Now, this may be unrelated, but prior to all of this, I had not one but two harddrives start to fail. One of them did fail. Now, I'm being good as far as I know. I have a surge protector on this stuff. Is there a surge coming from within? Is it time for a new motherboard, and is that the only thing that will save me? Am I smarter than I look, or not?

I'm on a budget. I really don't want to have to replace everything if I can avoid it.

I'm running WIndows 7 on a Gigabyte H55M.
 

Answer:Solved: Can't boot up anymore.

16 more replies
Relevance 43.05%

Hey everyone,

I've got this problem that's driving me mad and I can't seem to figure it out.

I have an Intel P4 3.0ghz on a Intel D865GLC motherboard.
It's about a year and half old and a couple of weeks ago I started noticing problems with booting and it seemed to be power related.

It won't start up anymore. The green light inside goes on, so it does have power, then when I push the power button, there are 2 ways it responds. 1) Either the green powerlight goes on and stays on and the cpu fan wil rotate once or twice and then stops, it won't do anything else. 2) nothing happens at all, not even the green light goes on. It alternates between these two situations.

It seems like it gets a short boost of power and then stops.
I had the power supply checked and it was fine and I just replaced the fan and the power cable as well, so that's not it. The processor seems fine, no bend pins or burns.

This is really frustrating me and I would really appreciate it if anyone has any input. I could bring it in, but these people charge 70 bucks just to look at the thing.

Answer:Computer won't boot anymore

Sounds like a power or heating issue; you might have damaged something


An old rig had a similar problem, and it was a faulty power supply. Though you say yours is fine . So idk

9 more replies
Relevance 43.05%

Hi,

HP laptop ZE4310 - 7 years old - XP SP3

Although CD-ROM is on top of the boot devices in the BIOS the CD ROM is systematically ignored when I want to boot a bootable CD. This was no problem in the past.
At boot time the drive is accessed (LED shows short activity) but that's all before switching to the HDD (the original 30GB disk was replaced in the past with a 120GB without apparent problem - maybe the boot problem stems from this ?).
The drive is seen allright under "My Computer" and I can play audio and DVD disks but although Autoplay is marked, that does not work either.

Opening up the laptop to find the CMOS battery to reset the BIOS is a no go because I don't want to vandalize the machine. It's not simple to take it apart.

I would like to reinstall XP but without recognizing the CDs it's difficult. I do have an external USB CD ROM drive. Any known trick to boot from this device ?

Thank you for your valuable input.

Lautrerable
 

More replies
Relevance 43.05%

The power to my house went off. I fixed it and turned on my computer again, and the power went off multiple times after that in succession. After the last time my computer no longer boots Windows. I have attempted to start normally (the Windows logo appears and then freezes). I have attempted to repair Windows (it loads Windows files and freezes in a stasis of loading). I have attempted to open in safemode but the drivers stop loading at classpnp.sys. I've even gone into the bios and loaded optimized defaults but still nothing. I'm guessing it's the motherboard? After attempting to repair the usb's lose power so I'm not sure if that would indicate anything. The only thing I haven't tried yet is installing a fresh version of Windows but I don't know where I put my disk and I have a lot of valuable files that I wouldn't be able to transfer at the moment.

Answer:Computer won't boot anymore?

Just out of curiosity, did you have the pc plugged into a surge protector?

Could be a bad power supply or

John

9 more replies
Relevance 43.05%

In vista, I was using EasyBCD, and I didnt like how long it waited before booting into the default OS, XP. So I changed the timeout to 3 seconds. Since then, Ive really found no need for Vista. But now that I want to use it, when my computer boots, I dont even get the option of choosing XP or Vista for those three seconds. Ive tried mashing the UP & DOWN arrow keys as it boots to try and get it to stop, but it doesnt help. Ive also tried installing EasyBCD in xp, but it just continually tells me that there is no Vista bootloader installed, would you like to install one, installed successfully, please restart the program. When you restart the program, you get the same set of dialog boxes.

Answer:Cant Boot Into Vista Anymore

I am going thru the same issue right now myself. I am guessing that you installed XP after Vista and that XP is on a different partition.

I am working with ComputerGuru the creator of this applicaiotn to solve my problem. As soon as i get a resolution i will let you know what to do.

6 more replies
Relevance 43.05%

I cannot run windows anymore, it won't boot. I also am not able to Boot from CD at ALL. At first I was, so I booted the CD but when I realized I had to do a new install (wipe my hardrive) I decided to try startup repair first. It went on for 3 hours so I assumed it wasn't going to work so I restarted the computer. Now when I turn on the computer windows doesn't even load, it just freezes on a black screen after the Starting windows screen comes up. When I try to boot from CD (I even set boot priority to CD first) It will tell me Windows is loading files, and once that's done the Starting Windows Screen appears and it just freezes on that. I have no idea what to do. Please help.
EDIT: Also just to note, a while back I got a USB flash drive, and spent an hour putting it in the front two USB ports, and eventually they broke (the metal inside) So my computer always gives me a USB over current error) And ever since that I have a common problem (tends to happen when I hold the power button to shut off the computer) where once the Dell screen comes up, (the one that says press F2 and F12 to boot menu and setup) it just freezes there, and the only way for me to get past it is if I turn off my power strip that the computer is connected to and back on.)
Also, after constantly turning off the computer trying to fix this problem, I get a Disskete seek 0 drive) error ontop of the usb over current error whenever I try to boot from CD)
 

Answer:Windows will not boot anymore

I think you have a hardware issue; probably multiple problems. I will move your thread to the Hardware forum, but my guess is that your computer will need hands-on repairs. Good luck.

If you get to where you can boot Windows, or at least the installation DVD, this can be moved back to the Windows 7 forum. Just click on Report and make the request.
 

1 more replies
Relevance 43.05%

Hello folks,

my Satellite L40 18P won't boot anymore. All I get is the Power LED to go green. The DVD ROM drive blinks and I can open and close it - but that's it. Nothing else happens.

Any idea in the forum what I can do to get the notebook boot again ? Or please ask questions for additional details.

many thanks, Johi 13

Answer:Satellite L40 18P won't boot anymore

Yes Joshi we need additional details.
Can you see anything on the screen?
Have you tried to test it with external monitor?
Since when you have noticed such behaviour?

What was your last activity?

Tell us a little bit more about this problem.

7 more replies
Relevance 43.05%

Hi all

I recently clean re-installed Win7 Pro 64 and now the Power Options keep reverting to High Performance every time I re-boot and even on wake up. If I set it to a power plan every time it works fine that one time.

I didn't make any changes to hardware/bios from previous install. The only change is that I first installed XP x86 to a separate redundant HD to enable a legacy scanner for which no 64bit drivers are available and I only boot into XP on an occasional as and when basis. I didn't make any changes to Windows boot manager & can only boot into it from F8.

I also downloaded a legacy game from Steam which is running happily on Win7. I rapidly decided that I hate Steam so I set it not to run at startup, only play offline and kill all associated process after closing the game. Again, I'm not running the game on a daily basis so it's unlikely this is affecting this persistant behaviour.

Grateful for any ideas.

Ian

Answer:Power Options change on Boot/Wake Up

Please Run sfc /scan now using option 2 in this tutorial: SFC /SCANNOW Command - System File Checker

Please post back the results.

3 more replies
Relevance 43.05%

Hello All, Just received my lenovo ideapad y460p and whenever I shut down the computer, or put the computer in sleep / hibernation mode the only way I can restart it is by removing the battery, unplugging the power cord, inserting the battery and plugging it back in. At first I thought it was a bug with the hibernation function so I disabled it via the command prompt. However the issue continues. I consulted Lenovo support via their instant message chat function but they were unable to diagnose the issue and directed me to the warranty support phone number, suggesting "one key recovery." I assume that means a system restore and hope there is a better solution than resetting the laptop to factory defaults as a first step. Please let me know if there are any suggestions or if anyone else is experiencing this issue. Thanks!Mark

Answer:y460p - Critical Boot / Wake Up Issue

One Key Recovery is not system restore.. its reinstalling windows :/ which is not cool if u have loaded some softwares.. well u said its a new laptop.. so do one key and see if it kills the issue.. if not call them again..

7 more replies
Relevance 43.05%

I am unable to boot or wake up my Studio 1558 laptop. Here is everything that may be relevant to the issue.

I upgraded from Win7 to Win10 a few months ago.
The only issue I had after the upgrade was that coming out of sleep mode required a reboot a few times (but not every time).
About two weeks ago I put the computer in Sleep mode.
When I pressed power to wake it up:

The keyboard lit up
I hear the fan start
I hear the optical drive engage
I get a black screen.
I do not hear any beeps.

Pressing the power button again immediately shuts everything down.

Here is what I've tried to get a response:

Removed battery and AC then held down power button to discharge. Result: nothing.
Pressed Fn+F1 with an external monitor attached. Result: nothing.
Pressed D while powering. Result: Screen flashed different colors but didn't boot.
Pressed Fn+F5 while powering: Result: nothing
Created a Windows10 installation CD (on another computer) and tried to reboot so I could run Repair your computer. Result: nothing except now...

I can't eject the CD from the optical drive
Pressing D no longer flashes the screen

So I've tried everything I can find. Any help would be appreciated.

More replies