Computer Support Forum

How to solve the error 0x800f081f Dism?

Question: How to solve the error 0x800f081f Dism?

Do I wanted to know if anyone can help me to fix the error 0x800f081f Dism/online /Cleanup-Image /RestoreHealth?

Thanks a lot.
Best regards.

Relevance 100%
Preferred Solution: How to solve the error 0x800f081f Dism?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: How to solve the error 0x800f081f Dism?

Resolution

For Windows 8.1, Windows 8, Windows Server 2012 R2 or Windows Server 2012

To resolve this problem, use the inbox Deployment Image Servicing and Management (DISM) tool. Then, install the Windows update or service pack again.
Open an elevated command prompt. To do this, swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click Search. Type Command Prompt in the Search box, right-click Command Prompt, and then click Run as administrator. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.Type the following command, and then press Enter.
It may take several minutes for the command operation to be completed.DISM.exe /Online /Cleanup-image /Restorehealth
Important When you run this command, DISM uses Windows Update to provide the files that are required to fix corruptions. However, if your Windows Update client is already broken, use a running Windows installation as the repair source, or use a Windows side-by-side folder from a network share or from a removable media, such as the Windows DVD, as the source of the files. To do this, run the following command instead: DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess
Note Replace the C:\RepairSource\Windows placeholder with the location of your repair source. For more information about using the DISM tool to repair Windows, reference Repair a Windows Image (Repair a Windows Image)
.Close the command prompt, and then run Windows Update again.
DISM creates a log file (%windir%/Logs/CBS/CBS.log) that captures any issues that the tool found or fixed. %windir% is the folder in which Windows is installed. For example, the %windir% folder is C:\Windows.




Go to Fix Windows corruption errors by using the DISM or System Update Readiness tool

5 more replies
Relevance 92.25%

I get Error 0x800f081f when run DISM.exe​ and it states the source file can't be found.  When I run SFC scannow I get nine files that can't be repaired, I copied those files and pasted them in the CBS log attachment.   Any help would be greatly appreciated. 
 
I just upgraded to Win 10 from Win 7.
 
I have included the DISM & CBS logs.
 CBS.log   1.75KB
  6 downloads
 dism.log   1.29MB
  4 downloads

Answer:I get Error 0x800f081f when run DISM.exe

Any help would be appreciated

1 more replies
Relevance 92.25%

Hi Aura!
 
I have the same error, when I ran dism.exe /restorehealth (0x800f081f)
 
I have updated my Windows 8.1 to Windows 10
 
Can you help me?
 
Thanks!

Back to top
Quote
MultiQuote
Edit
 

Answer:Error 0x800f081f when run DISM.exe

Hi romeojr Alright, follow the instructions below please.DISM - Fixing Component Store CorruptionFollow the instructions below to run a DISM scan on your system:On Windows 8, drag your cursor in the bottom-left corner, and right-click on the metro menu preview, then select Command Prompt (Admin);On Windows 8.1, right click on the Windows logo in the bottom-left corner and select Command Prompt (Admin);Enter the command DISM /Online /Cleanup-Image /RestoreHealth and press on Enter;Let the scan run until the end (100%);Copy the C:\Windows\Logs\DISM folder and C:\Windows\Logs\CBS\CBS.log file on your Desktop, then right-click on it, go to Send to... and select Compressed .zip archive;Upload the file on Dropbox, Google Drive or OneDrive and post the download URL for it here;Note: Please note that the CBS.log is volatile, which means that if you don't upload it after the SFC scan is completed, it won't contains the information from the scan anymore. So archive it and upload it as soon as you can.

11 more replies
Relevance 92.25%

When i run sfc /scannow, i get an error stating that it found errors, but it was unable to fix them, so I decided to run the DISM tool. I get this error and I've made sure that I've enabled component installation and repair in the group policy settings,so I know that that isn't the problem. Is there anything I can do to fix this?

Answer:DISM error 0x800f081f

check - contact windows update to download repair content

22 more replies
Relevance 91.02%

0



I have a user who has a Lenovo notebook recently upgraded to Windows 10 Pro.
He complained that it is very sluggish and Internet Explorer is extremely sluggish since the upgrade to Windows 10. I ran SFC /scannow with this result:
Windows Resource Protection found corrupt files but was unable to fix some
of them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
example C:\Windows\Logs\CBS\CBS.log. Note that logging is currently not
supported in offline servicing scenarios.
I ran Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:E:\x64\Sources\Install.esd:1 /limitaccess pointed to a USB drive with a fresh download of Windows 10 on it. I get this result:
Error: 0x800f081f
The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see http://go.microsoft.com/fwlink/?LinkId=243077.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
Here are the errors from the log file:
2015-11-25 09:45:57, Error DISM DISM Package Manager: PID=4792 TID=3828 Failed finalizing changes. - CDISMPackageManager::Internal_Finalize(hr:0x800f081f)
2015-11-25 09:45:57, Error DISM DISM Package Manager: PID=4792 TID=3828 The source files could not be found; their location must be specified using the /source option to restore the feature. - GetCbsErrorMsg
2015-11-25 09:45:57,... Read more

Answer:DISM /restorehealth error 0x800f081f

check out the link in my sig below

3 more replies
Relevance 91.02%

After Installing Windows 10, I encountered some probrems.
So, I tried to fix with dism.exe, but in vain.
Please help me.
 
Here's my SFC log, please tell me what I should do.
 
https://dl.dropboxusercontent.com/u/4463161/cbs.txt
 

Answer:dism ends with error 0x800f081f

Ooops it seems bit technical, and I suggesst you to get help from expert.
But before this you should try these steps if works for you.
 
"www dot support.microsoft.com/en-us/kb/947821"

2 more replies
Relevance 91.02%

Hi. i need to repair win with Dism repair command but in last step i receive this error: why ?

Answer:DISM error code 0x800f081f - how to fix it ?

That is a known issue. If you look up the feedbacks at Feedback Hub, you will see a sea of people reporting the same issue.
It happens to Win 10 version 1703 Creators Update.
It actually began with Insider Preview about 5 builds ago. Never get fixed. Insider builds are experiencing the same issue.
Microsoft apparently is aware of it. Hope they will get it fix on next update.
Meanwhile if your sfc /scannow reports " no integrity violation", you should be ok.
Let it slide and wait for Microsoft.

more replies
Relevance 91.02%

Running DISM because sfc failed. DISM is telling me the operation failed that either the repair source was not found or the component store cannot be repaired.

Any ideas?

Thanks!

Rob

Answer:DISM Giving 0x800f081f Error

Any ideas?



Try this batch file---
Download it & right click it & choose Properties & Unblock it & right click it & choose Run as administrator---

dism.bat

Takes about 2 hours to finish.

It should look similar to this unless your computer is really messed up---

4 more replies
Relevance 91.02%

Hey Everyone,

I have a similar issue to others on this forum, but posted solutions do not work. Both SFC and DISM fail to complete. I'm stuck...need a new set of eyes here; solution cannot include an OS refresh or reset. Here's the detail:

Windows Update works.Everything below is done in an elevated command window.SFC /scannow fails. Error is "Windows Resource Protection found corrupt files but was unable to fix some of them."DISM /Online /Cleanup-Image /StartComponentCleanup completes without error.DISM /Online /Cleanup-Image /ScanHealth completes. Says corruption is repairable.DISM /Online /Cleanup-Image /RestoreHealth fails with error code 0x800f081f.DISM log is full of Chinese characters (attached).SFCFIX completes. Says there is no corruption.Tried above in safe mode w/ networking. SFC and DCIM fail to complete.Ran Microsoft Safety Scanner against computer. No infected files.Ran SFC and DISM 11 times.Compared SFC and DISM logs to a set on a working computer (no errors). Exceptions in faulty computer logs are also present in working computer logs.

Thanks in advance.

Answer:SFC and DISM Fail. Error 0x800f081f

Have you tried restarting after running dism restore health & running sfc again ?

SFC /SCANNOW Command - Run in Windows 8

7 more replies
Relevance 91.02%

I recently upgraded to Windows 10 and I've been having some issues.
 
I have done this troubleshooting so far:
1. sfc /scannow
Result: Windows Resource Protection found corrupt files but was unable to fix them.
 
2. dism.exe /online /cleanup-image /scanhealth
Result: operation successful
 
3. dism.exe /online /cleanup-image /restorehealth
Result: Error 0x800f081f
 
4. Re-ran 1-3
Result: Error 0x800f081f
 
5. Ran dism /online /cleanup-image /StartComponentCleanup
Result: Successful
 
6. Re-ran 1-3
Result: Same
 
Any ideas?

Answer:DISM.exe /RestoreHealth Error 0x800f081f

Hi diesel1218 I'll assist you with your issue since I assisted 2-3 users so far and we managed to solve it without a lot of trouble. Follow the instructions below please.System File Checker (SFC)Follow the instructions below to run a SFC scan on your system and to provide the CBS log in your next reply;On Windows Vista & 7, click on the Windows Start Menu, then enter cmd in the search box, right-click on the cmd icon and select Run as AdministratorOn Windows 8, drag your cursor in the bottom-left corner, and right-click on the metro menu preview, then select Command Prompt (Admin);On Windows 8.1, right click on the Windows logo in the bottom-left corner and select Command Prompt (Admin);Enter the command below and press on Enter;sfc /scannowNote: There's a space between "sfc" and "/scannow";Once the scan is complete, enter the command below and press on Entercopy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"A file called cbs.txt will have appeared on your Desktop. Upload the file on Dropbox, Google Drive or OneDrive and post the download URL for it here;Note: Please note that the CBS.log is volatile, which means that if you don't upload it after the SFC scan is completed, it won't contains the information from the scan anymore. So archive it and upload it as soon as you can.

18 more replies
Relevance 91.02%

Hello,

Windows 10 power user here. I've been viewing help topics here for some time and found this forum very useful. However, there is one problem that I can't seem to solve.

Whenever I use the DISM tool to repair Windows 10, I get the error "0x800f081f - The source files could not be found".

I tried the ESD, WIM and ONLINE options using a mounted Windows 10 installation ISO, and pointed to it correctly in the command (I followed Brink's tutorial). However, I get the same error. I don't understand why DISM cannot find it if it is running with administrative privileges, and I can CLEARLY see the file in Explorer. I also tried copying the .esd and .wim file to Desktop. Again, the same error. I also tried turning off all firewalls temporarily but to no avail.

Here is my dism.log file.


Code:
2016-07-22 17:35:17, Info DISM DISM Package Manager: PID=4836 TID=8108 Error in operation: source for package or file not found, ResolveSource() unsuccessful. (CBS HRESULT=0x800f081f) - CCbsConUIHandler::Error
2016-07-22 17:35:17, Error DISM DISM Package Manager: PID=4836 TID=5692 Failed finalizing changes. - CDISMPackageManager::Internal_Finalize(hr:0x800f081f)
2016-07-22 17:35:17, Error DISM DISM Package Manager: PID=4836 TID=5692 The source files could not be found; their location must be specified using the /source option to restore the feature. - GetCbsErrorMsg
2016-07-22 17:35:17, Error DISM ... Read more

Answer:Error 0x800f081f when using DISM tool

Anyone?

2 more replies
Relevance 91.02%

I recently updated to Windows 10 (from Windows 7) and I feel there is something wrong with the performance of my ASUS Zenbook.

I run DISM and I got the following error message:

1. DISM /Online /Cleanup-Image /RestoreHealthDISM /Online /Cleanup-Image /RestoreHealth
Error: 0x800f081f

The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.

The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

So I run the check again with an ISO image of Windows mounted in E, but I got the same error message.

2. C:\WINDOWS\system32>DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:E:\Sources\Install.wim:1 /LimitAccess

Deployment Image Servicing and Management tool
Version: 10.0.10240.16384

Image Version: 10.0.10240.16384

[==========================100.0%==========================]

Error: 0x800f081f

The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.

The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

Here is the log file. Please read it and tell me a solution. Thanks.
https://drive.google.com/file/d/0B8Z...ew?usp=sharing
What else can I do? I do not want to do windows reset or so... Read more

Answer:Error 0x800f081f when Running DISM. Need Help!

https://www.tenforums.com/performance...tml#post403939

5 more replies
Relevance 91.02%

0



I have a user who has a Lenovo notebook recently upgraded to Windows 10 Pro.
He complained that it is very sluggish and Internet Explorer is extremely sluggish since the upgrade to Windows 10. I ran SFC /scannow with this result:
Windows Resource Protection found corrupt files but was unable to fix some
of them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
example C:\Windows\Logs\CBS\CBS.log. Note that logging is currently not
supported in offline servicing scenarios.
I ran Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:E:\x64\Sources\Install.esd:1 /limitaccess pointed to a USB drive with a fresh download of Windows 10 on it. I get this result:
Error: 0x800f081f
The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see http://go.microsoft.com/fwlink/?LinkId=243077.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
Here are the errors from the log file:
2015-11-25 09:45:57, Error DISM DISM Package Manager: PID=4792 TID=3828 Failed finalizing changes. - CDISMPackageManager::Internal_Finalize(hr:0x800f081f)
2015-11-25 09:45:57, Error DISM DISM Package Manager: PID=4792 TID=3828 The source files could not be found; their location must be specified using the /source option to restore the feature. - GetCbsErrorMsg
2015-11-25 09:45:57,... Read more

Answer:DISM /restorehealth error 0x800f081f

check out the link in my sig below

14 more replies
Relevance 91.02%

Hello,

Windows 10 power user here. I've been viewing help topics here for some time and found this forum very useful. However, there is one problem that I can't seem to solve.

Whenever I use the DISM tool to repair Windows 10, I get the error "0x800f081f - The source files could not be found".

I tried the ESD, WIM and ONLINE options using a mounted Windows 10 installation ISO, and pointed to it correctly in the command (I followed Brink's tutorial). However, I get the same error. I don't understand why DISM cannot find it if it is running with administrative privileges, and I can CLEARLY see the file in Explorer. I also tried copying the .esd and .wim file to Desktop. Again, the same error. I also tried turning off all firewalls temporarily but to no avail.

Here is my dism.log file.


Code:
2016-07-22 17:35:17, Info DISM DISM Package Manager: PID=4836 TID=8108 Error in operation: source for package or file not found, ResolveSource() unsuccessful. (CBS HRESULT=0x800f081f) - CCbsConUIHandler::Error
2016-07-22 17:35:17, Error DISM DISM Package Manager: PID=4836 TID=5692 Failed finalizing changes. - CDISMPackageManager::Internal_Finalize(hr:0x800f081f)
2016-07-22 17:35:17, Error DISM DISM Package Manager: PID=4836 TID=5692 The source files could not be found; their location must be specified using the /source option to restore the feature. - GetCbsErrorMsg
2016-07-22 17:35:17, Error DISM ... Read more

Answer:Error 0x800f081f when using DISM tool

Anyone?

6 more replies
Relevance 90.2%

Hello All,
 
I apologise for making my first post a plea for help, but I'm at my wit's end...
 
I realise this is a common issue with Windows 10, I've searched for solutions to the CRITICAL_PROCESS_DIED, since upgrading.
 
I have already updated graphics drivers and ensured that my BIOS settings are appropriate for my SSD. So far, in the last 2 days I've had no further instances.
 
However, when I ran SFC /scannow I received the following message:

Microsoft Windows [Version 10.0.10240]
(c) 2015 Microsoft Corporation. All rights reserved.

C:\WINDOWS\system32>sfc /scannow

Beginning system scan.  This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.

Windows Resource Protection found corrupt files but was unable to fix some
of them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
example C:\Windows\Logs\CBS\CBS.log. Note that logging is currently not
supported in offline servicing scenarios.

C:\WINDOWS\system32>
I have attached the log file
 
 
 
Further research suggested I should attempt to clean up the corrupt files, with dism, but I encountered the Error: 0x800f081f:

C:\WINDOWS\system32>Dism /Online /Cleanup-Image /RestoreHealth

Deployment Image Servicing and Management tool
Version: 10.0.10240.16384

Image Version: 10.0.10240.16384

[==========================100.0%==========================]

Error: 0x800f081f

The source files could... Read more

More replies
Relevance 90.2%

Hi!
 
I just updated my Windosw 8.1 to 10, and have this error on DISM.exe /RestoreHealth.
 
Can somebody help me?
 
 
Thanks!

More replies
Relevance 90.2%

i did these all scans but nothing worked im getting this error 0x800f081f does anyone had it tooo?? pls help ..

"dism /online /cleanup-image /scanhealth
dism /online /cleanup-image /checkhealth
dism /online /cleanup-image /restorehealth
&
DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:\Sources\Install.wim:1 /LimitAccess"

Answer:0x800f081f Got error in SFC & DISM too in build 10240

There's no need to point DISM to a source. Try running it normally and see what happens.

16 more replies
Relevance 90.2%

I recently upgraded to Windows 10 and I've been having some issues.
 
I have done this troubleshooting so far:
1. sfc /scannow
Result: Windows Resource Protection found corrupt files but was unable to fix them.
 
2. dism.exe /online /cleanup-image /scanhealth
Result: operation successful
 
3. dism.exe /online /cleanup-image /restorehealth
Result: Error 0x800f081f
 
4. Went into gpedit.msc and enabled "Specify settings for optinoal component installation and component repair"
5. Enabled "Contact Windows Update directly to download repair content
6. Restarted computer
7. Re-ran 1-3
Result: Error 0x800f081f
 
8. Ran the SFCfix provided here (http://www.bleepingcomputer.com/forums/t/576561/dism-restorehealth-error-0x800f0906-that-i-cannot-find-source-file-for/)
9. Re-ran 1-3
Result: Same
 
10. Ran dism /online /cleanup-image /StartComponentCleanup
Result: Successful
 
11. Re-ran 1-3
Result: Same
 
Any ideas?
 
DISM /restorehealth log file and SFC log file attached

Answer:DISM.exe /RestoreHealth Produces Error 0x800f081f

Hi Big Benny Follow the instructions below please.SFCFix - Fix TimeWARNING! The following fix is specific to the user's system in this thread. No one else should follow the instructions below to apply that fix, as it could damage your system. If you need assistance with an issue, please start a new thread and someone will assist you shortly.Follow the instructions below to download and execute a SFCFix fix, and provide the log.Download SFCFix and move the executable on your Desktop;Download the attached SFCFix.zip and move the archive to your Desktop;Note: Make sure that the file is named SFCFix.zip, do not rename it.Save any work you have open, and close every programs;Drag the SFCFix.zip archive file over the SFCFix.exe executable and release it;SFCFix will launch, let it complete;Once done, a file will appear on your Desktop, called SFCFix.txt;Open the file, then copy and paste its content in your next reply;SFCFix.zip

20 more replies
Relevance 90.2%

after updating to 8.1u1, i'm running "dism /online /cleanup-image /restorehealth" and I get the following:

C:\Windows\Logs\DISM>dism /online /cleanup-image /restorehealth
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Image Version: 6.3.9600.17031
[==========================100.0%==========================]
The restore operation failed. Either the repair source was not found or the comp
onent store cannot be repaired.
Error: 0x800f081f
DISM failed. No operation was performed.
For more information, review the log file.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

*********************

relevant bits from it seem to be:
Checking System Update Readiness.
(p) CSI Payload Corrupt wow64_microsoft-windows-directui_31bf3856ad364e35_6.3.9600.16438_none_b24310b3f6c19eb0\Windows.UI.Xaml.dll
Repair failed: Missing replacement payload.
(p) CSI Payload Corrupt wow64_microsoft-windows-directui_31bf3856ad364e35_6.3.9600.16476_none_b215d06ff6e3dbc6\Windows.UI.Xaml.dll
Repair failed: Missing replacement payload.
(p) CSI Payload Corrupt wow64_microsoft-windows-directui_31bf3856ad364e35_6.3.9600.16408_none_b2638077f6a94add\Windows.UI.Xaml.dll
Repair failed: Missing replacement payload.
Summary:
Operation: Detect and Repair
Operation result: 0x0
Last Successful Step: Entire operation completes.
Total Detected Corruption: 3
CBS Manifest Corruption: 0
CBS Metadata Corruption: 0
CSI Manifest Corruption: 0
CSI Metadata Corruption: 0... Read more

Answer:DISM /restoreHealth failes with error: 0x800f081f

I'm having the same error on my 32-bit system that I just updated last night.
I don't understand most of the text in my DISM log, but after the text, the remaining 90% of the log is filled with what appears to be Chinese characters, with some binary characters interspersed. The log is over 1.2mb in size.
However, what's interesting is that the SFC /SCANNOW command shows no corrupted files.
I've seen a few posts on various forums about this, with no definitive resolutions.

44 more replies
Relevance 90.2%

I was having some issues with Cortana on the recently released windows 10, so decided to run a SFC /Scan Now and DISM /Online /Cleanup-Image /restorehealth.

DISM Failed with

"Error: 0x800f081f



The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.


The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log"


The log is here: https://app.box.com/s/9ing5w3gs7b538d8nzqvz7r4y0msr78r

I could not understand the errors, only that it can't seem to find the source and google searching has gotten me no where fast.

SFC Fails with:

"Windows Resource Protection found corrupt files but was unable to fix someof them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log. Note that logging is currently not supported in offline servicing scenarios."

Again I have had no luck in finding a fix.

CBS log is here: https://app.box.com/s/0zrlj0dnfx0mcjpoen7olqqawy1rp1ck

Have tried mounting an image of win 10 and pointing DISM to it using

C:\WINDOWS\system32>DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:G:\Sources\Install.wim:1 /LimitAccess



Deployment Image Servicing and Management tool
Version: 10.0.10240.16384



Image Version: 10.0.10240.16384


[==========... Read more

Answer::( DISM (Error 0x800f081f) and SFC (Failed to Repair)

Have the same problem on Windows 10

14 more replies
Relevance 90.2%

I was having some issues with Cortana on the recently released windows 10, so decided to run a SFC /Scan Now and DISM /Online /Cleanup-Image /restorehealth.

DISM Failed with

"Error: 0x800f081f



The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.


The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log"


The log is here: https://app.box.com/s/9ing5w3gs7b538d8nzqvz7r4y0msr78r

I could not understand the errors, only that it can't seem to find the source and google searching has gotten me no where fast.

SFC Fails with:

"Windows Resource Protection found corrupt files but was unable to fix someof them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log. Note that logging is currently not supported in offline servicing scenarios."

Again I have had no luck in finding a fix.

CBS log is here: https://app.box.com/s/0zrlj0dnfx0mcjpoen7olqqawy1rp1ck

Have tried mounting an image of win 10 and pointing DISM to it using

C:\WINDOWS\system32>DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:G:\Sources\Install.wim:1 /LimitAccess



Deployment Image Servicing and Management tool
Version: 10.0.10240.16384



Image Version: 10.0.10240.16384


[==========... Read more

Answer::( DISM (Error 0x800f081f) and SFC (Failed to Repair)

Have the same problem on Windows 10

51 more replies
Relevance 90.2%

Hi,
I'm trying to use DISM to repair a corrupt file and the command keeps failing with


Code:
Error: 0x800f081fThe source files could not be found.Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see http://go.microsoft.com/fwlink/?LinkId=243077.

I then used Image Health command 1 , 2 , 3 . Using Win10_1607_English_x64.iso which I downloaded with the ISO download tool. And still this results in the same thing.

I did notice in DISM.log that it says

Code:
[11520] [0x8007000e] StateStoreGetMountedImageWimbootEntries:(1191): Not enough storage is available to complete this operation.

I had no problems mounting the ISO and I have plenty of free space on the drive.

one of the logs from Image Health enclosed. Any ideas?
thanks

Answer:DISM RestoreHealth failing with Error: 0x800f081f

The error refers to an update KB3206632. First, insure your ISO is the exact same version as your Windows version. They must match. You can check the Windows version by entering winver at the admin command prompt. You can determine the ISO version with the command from the admin command prompt.

Dism /get-wiminfo /wimFile:E:\sources\install.wim /index:1 where E is the mounted ISO drive

After mounting the ISO and insuring the versions match, use the following command

Dism /online /cleanup-image /restorehealth /source:wim:E:\sources\install.wim:1 /limitaccess

Be careful to include a blank before each /.

12 more replies
Relevance 90.2%

I'm trying to repair my Windows Store, but DISM seems to refuse to work. I made an installation ISO that's the same version as mu os using the tool, but DISM still gives me a source error. I'm running 10240.

Code:
C:\WINDOWS\system32>dism.exe /online /cleanup-image /restorehealth /source:wim:D:\sources\install.wim:1

Deployment Image Servicing and Management tool
Version: 10.0.10240.16384

Image Version: 10.0.10240.16384

[==========================100.0%==========================]

Error: 0x800f081f

The source files could not be found.
Use the "Source" option to specify the location of the files that are required t
o restore the feature. For more information on specifying a source location, see
http://go.microsoft.com/fwlink/?LinkId=243077.

The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log


Code:
2015-07-29 17:55:42, Info DISM PID=6576 TID=2440 Scratch directory set to 'C:\Users\Graham\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2015-07-29 17:55:42, Info DISM PID=6576 TID=2440 DismCore.dll version: 10.0.10240.16384 - CDISMManager::FinalConstruct
2015-07-29 17:55:42, Info DISM PID=6576 TID=2440 Successfully loaded the ImageSession at "C:\WINDOWS\System32\Dism" - CDISMManager::LoadLocalImageSession
2015-07-29 17:55:42, Info DISM DISM Provider Store: PID=6576 TID=2440 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_Initia... Read more

More replies
Relevance 89.38%

I recently upgraded to Windows 10 from windows 8.1 and I've been having some issues.
 
1.
 
DISM.exe /RestoreHealth Error 0x800f081f
 
I have done this troubleshooting so far:
1.1. sfc /scannow
Result: Windows Resource Protection found corrupt files but was unable to fix them.
 
1.2. dism.exe /online /cleanup-image /restorehealth
Result: Error 0x800f081f
 
1.3. Re-ran 1&2 many times
Result: Same result
 
I have attached the cbs.txt in the following link
 
http://1drv.ms/1UZScK4
 
2
After I upgrade my windows from 8.1 to 10, the auto-MDIX feature of my Ethernet work only 2 days and didn't work anymore. I can only connect my LAN interface only with the correct type of cable to the switch (it will not establish connection for an incorrect type of LAN cable),
 
In addition, my Ethernet driver seems to be the latest one already
 
As I search on the internet for both issues for quite a while and still no solution, Any help would be highly appreciated!
 
Thank you
 
 
 
 
 
 
 

More replies
Relevance 89.38%

I was having some issues with Cortana on the recently released windows 10, so decided to run a SFC /Scan Now and DISM /Online /Cleanup-Image /restorehealth. DISM Failed with Error: 0x800f081f
The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see ht tp://go.microsoft.com/fwlink/?LinkId=243077.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log"
The log is here: https://app.box.com/s/9ing5w3gs7b538d8nzqvz7r4y0msr78r
I could not understand the errors, only that it can't seem to find the source and google searching has gotten me no where fast.
SFC Fails with:
"Windows Resource Protection found corrupt files but was unable to fix someof them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log. Note that logging is currently not supported in offline servicing scenarios."
Again I have had no luck in finding a fix.
CBS log is here: https://app.box.com/s/0zrlj0dnfx0mcjpoen7olqqawy1rp1ck
Have tried mounting an image of win 10 and pointing DISM to it using
C:\WINDOWS\system32>DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:G:\Sources\Install.wim:1 /LimitAccess
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
[==========================100.0%================== ========] ... Read more

Answer:DISM (Error 0x800f081f) and SFC (Failed to Repair) Windows 10

Some links to guide you: Windows Resource Protection found corrupt files but was unable to fix some of them Windows 8 fails to boot; Automatic Repair, Refresh, Reset PC also fails

3 more replies
Relevance 89.38%

I have cleanly installed Windows 10 Pro. I then ran sfc /scannow (elevated command prompt) and I am receiving the usual errors that can't be fixed.
Normally the "Dism /Online /Cleanup-Image /RestoreHealth" command resolves this.

Unfortunately I am receiving the now famous "Error 0x800f081f"
I mounted the latest Windows 10 iso to drive "I" and ran the below command to access the install.esd file.

Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:I:\Sources\Install.esd:1 /limitaccess

This is not fixing my issue and I am still getting the "Error 0x800f081f". I have installed the latest build twice now and I am having the same result.
Am I doing it wrong and using the wrong commands or is the latest build corrupt?
I don't want to have to revert back to Windows 8.1.

Thanks in advance.

Answer:New windows 10 build 10586.3 DISM (Error 0x800f081f)

https://www.tenforums.com/performance...tml#post403939

4 more replies
Relevance 89.38%

I have cleanly installed Windows 10 Pro. I then ran sfc /scannow (elevated command prompt) and I am receiving the usual errors that can't be fixed.
Normally the "Dism /Online /Cleanup-Image /RestoreHealth" command resolves this.

Unfortunately I am receiving the now famous "Error 0x800f081f"
I mounted the latest Windows 10 iso to drive "I" and ran the below command to access the install.esd file.

Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:I:\Sources\Install.esd:1 /limitaccess

This is not fixing my issue and I am still getting the "Error 0x800f081f". I have installed the latest build twice now and I am having the same result.
Am I doing it wrong and using the wrong commands or is the latest build corrupt?
I don't want to have to revert back to Windows 8.1.

Thanks in advance.

Answer:New windows 10 build 10586.3 DISM (Error 0x800f081f)

http://www.tenforums.com/performance...tml#post403939

4 more replies
Relevance 89.38%

I need help with fixing corrupted files.

There were 2 issues that were causing unacceptable performance of Windows 10 that started this saga. These did not appear right away but gradually became worse over time.


1) Boot up times are exceedingly long (14 minutes to get to log on screen; additional 14 minutes until system is usable)
2) Random episodes where system becomes unresponsive; have to wait up to several minutes before the system will respond to commands. This happens randomly. It has occurred while web serving, entering data on an Excel spreadsheet, typing in Word, etc. Does not seem to be related to having many apps open or just one. I do see 100% disk utilization on Task manager when these episodes occur.

Background info

OS Windows 10 Pro, version 10.0.10586, did a clean install
Also Running latest version of Norton Security with Backup, all updates are current

Hardware
has been running fine with Windows 7 and Windows 8.1

Note: I have left everything at stock settings, there has been no overclocking, etc.

Hardware info:

ASRock Z77 Extreme4 Motherboard with Intel i5-3570K CPU 3.4 GHz
BIOS American Megatrends Inc. P1.80 (6/15/2012), worked fine with Windows 8.1
NVidia GeForce GTX 550 Ti Graphics Card
8 GB memory
Virtual memory 9.15 GB Total, 7.65 GB available
HDD WD5000AAKS-22YGAO 500 GB, defragmented and optimized 427 GB free space

Home network

ATT Uverse Internet
HG3801V modem/router
NAS Synology Disk Station DS 207+
... Read more

More replies
Relevance 89.38%

Hello,
 
I had upgrade to windows 10 from windows 7. I'm having problems with my directories.
I have ran sfc & dism several times, below are the latest log files.
 
1. sfc /scannow - found file corruption, log file attached.
2. dism /online /cleanup-image /restorehealth - get 0x800f081f error, log file attached.
3. SFCFix.exe - no error found, log file attached.
 
What else can I do to fix this problem?
 
Thanks,
/Ken.

Answer:windows 10 sfc file corruption & dism 0x800f081f error

Sorry for the late reply
 
What problems are you having with the directory? It does appear to be a corrupt system file.

0 more replies
Relevance 89.38%

I need help with fixing corrupted files.

There were 2 issues that were causing unacceptable performance of Windows 10 that started this saga. These did not appear right away but gradually became worse over time.


1) Boot up times are exceedingly long (14 minutes to get to log on screen; additional 14 minutes until system is usable)
2) Random episodes where system becomes unresponsive; have to wait up to several minutes before the system will respond to commands. This happens randomly. It has occurred while web serving, entering data on an Excel spreadsheet, typing in Word, etc. Does not seem to be related to having many apps open or just one. I do see 100% disk utilization on Task manager when these episodes occur.

Background info

OS Windows 10 Pro, version 10.0.10586, did a clean install
Also Running latest version of Norton Security with Backup, all updates are current

Hardware
has been running fine with Windows 7 and Windows 8.1

Note: I have left everything at stock settings, there has been no overclocking, etc.

Hardware info:

ASRock Z77 Extreme4 Motherboard with Intel i5-3570K CPU 3.4 GHz
BIOS American Megatrends Inc. P1.80 (6/15/2012), worked fine with Windows 8.1
NVidia GeForce GTX 550 Ti Graphics Card
8 GB memory
Virtual memory 9.15 GB Total, 7.65 GB available
HDD WD5000AAKS-22YGAO 500 GB, defragmented and optimized 427 GB free space

Home network

ATT Uverse Internet
HG3801V modem/router
NAS Synology Disk Station DS 207+
... Read more

Answer:scripts did not fix corrupted files sfc or dism, error 0x800f081f

I finally got it to work.

First, if you have a Nvidia graphics card be aware of a serious driver issue published 9 March 2016

Nvidia replaces its Game Ready driver for The Division with something less terrorizing - Yahoo News

“After finding a critical installation issue, the team has replaced yesterday’s driver (364.47) with today’s new driver (364.51)”. Note that 364.51 is beta, emphasizes how bad 364.47 is and how desperate the company is.

Go to http://www.nvidia.com/Download/Find.aspx?lang=en-us to update your driver.

After a bit of internet searching, you will find that Nvidia seems to have earned quite a track record of botching up drivers. Seems like Nvidia should start compensating us for crashing our systems. I need to find a way of delaying updates for a couple of months so I am not at the bleeding edge. More on this later.

Tried 3 times to do a clean install of the driver, each crashed. So I HAD to settle for an express install and that seemed to work. Not filling me with confidence Nvidia!

Rebooted, and opened administrative command prompt and still have file corruptions, still cannot repair with “cannot find source files” error.

In administrative command prompt entered:
DISM /Online /Cleanup-Image /CheckHealth

And went to C:\Windows\Logs|DISM and viewed the report. (This is a much more useful log than what I had received from prior commands, so I suggest you start with this first.)

This identified opencl.dll as the ... Read more

2 more replies
Relevance 89.38%

Hello everyone. This is my first time here so I'm hoping I'm in the right section and that the title is clear and all that. So basically I had some trouble with viruses a while back. I did manage to get rid of them (I think) but my PC has been a bit odd since then. For starters the Start Menu wont open, neither will the Search window. I also can't right click anything on the....actually I'm not sure what it's called but the Start bar at the bottom of the screen. I checked online for help and found the RestoreHealth command of Powershell, so I tried it out. However I ran into the error in the title of this thread. I went through the logs and found this:

2016-12-29 11:34:03, Error DISM DISM Package Manager: PID=4216 TID=5304 Failed finalizing changes. - CDISMPackageManager::Internal_Finalize(hr:0x800f081f)2016-12-29 11:34:03, Error DISM DISM Package Manager: PID=4216 TID=5304 The source files could not be found; their location must be specified using the /source option to restore the feature. - GetCbsErrorMsg2016-12-29 11:34:03, Error DISM DISM Package Manager: PID=4216 TID=5304 Failed processing package changes with session option CbsSessionOptionRepairStoreCorruption - CDISMPackageManager::RestoreHealth(hr:0x800f081f)2016-12-29 11:34:03, Error DISM DISM Package Manager: PID=4216 TID=5304 The source files could not be found; their location must be specified using the /source option to restore the feature.... Read more

Answer:Windows 10 Powershell DISM RestoreHealth error 0x800f081f

You need to supply access to the install.wim or install.esd for the image that matches your installed version of Windows 10. It has to be the same version (probably 1607), same bittedness (32-bit or 64-bit), and same base language. You can download the ISO from the Windows ISO source and then right-click and mount it as a drive. Let's say this is drive J: Thus, your DISM syntax should be

dism /online /cleanup-image /restorehealth /source:WIM:J:\sources\install.wim:1

if it's an .esd file (which it shouldn't be if you get the ISO from the recommended download point) change the WIM to ESD and the .wim in the filename to .esd

HTH and good luck. If this fails, you might need to change the number after the filename to :2 insead of :1.

And BTW, there's a great tutorial on this subject here at TenForums, too: https://www.tenforums.com/tutorials/...-10-image.html
--Ed--

9 more replies
Relevance 89.38%

I've been trying to repair an error which system file checker gives me, however no matter what I try as it seems, I can't get windows to fix it.

So it begins with sfc /scannow, and when I create the log file, I find this:

2015-08-14 18:45:52, Info CSI 00002bac [SR] Cannot repair member file [l:60{30}]"Microsoft.PowerShell.Host.psd1" of Microsoft.Windows.PowerShell.V3.Common, Version = 10.0.10240.16384, pA = amd64, nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35} in the store, hash mismatch
2015-08-14 18:45:53, Info CSI 00002c00 [SR] Cannot repair member file [l:60{30}]"Microsoft.PowerShell.Host.psd1" of Microsoft.Windows.PowerShell.V3.Common, Version = 10.0.10240.16384, pA = amd64, nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35} in the store, hash mismatch
2015-08-14 18:45:53, Info CSI 00002c01 [SR] This component was referenced by [l:338{169}]"Microsoft-Windows-Client-Features-Package-AutoMerged-admin~31bf3856ad364e35~amd64~~10.0.10240.16384.Microsoft-Windows-Client-Features-Package-AutoMerged-admin-Deployment"
2015-08-14 18:45:53, Info CSI 00002c04 [SR] Could not reproject corrupted file [ml:162{81},l:160{80}]"\??\C:\Windows\System32\WindowsPowerShell\v1.0\Modules\Microsoft.PowerShell.Host"\[l:60{30}]"Microsoft.PowerShell.Host.psd1"; source file in store is also corrupted

So the first recommendations go to trying DISM, Dism /Online /Cleanup... Read more

Answer:Error: 0x800f081f when running DISM to repair SFC-Problems

I am having the same problem.

BTW, do you have trouble shutting down the computer? I usually get the memory referenced at some address could not be read message, I have to click OK to shut down an unknown app. Usually when this happens, there is Windows Update package to be downloaded and installed. Then the problem is gone until next time.

When I run DISM, I got error code 0x800f081f. Incidentally, other people with Windows Update problem have the same trouble code. I wonder whether these issues are related.

12 more replies
Relevance 88.15%

I just upgraded to Win 10 from Win 7.
 
I get Error 0x800f081f when run DISM.exe​ and it states the source file can't be found.  When I run SFC scannow I get nine files that can't be repaired,    Any help would be greatly appreciated. 
 
 
 
 

More replies
Relevance 88.15%

Hello all, I will try to explain my problem as clear as I can. I am not super tech savvy, so I need your help.

I found a thread that seemed to have the same problem but it did not fix mine.

Before I upgraded from Windows 8.1 to 10, everything worked fine. Now it has been around 2 weeks since the upgrade and I am running into a problem. My user on the PC seems to be working fine, but when the other person trys to log into her account on the PC things go weird.

First it was signing her in with a temporary account, this was solved by logging her in later.

Now it just takes a much longer time to load things when we start up our accounts. Sometimes the PC was freezing and we were not able to do anything, unless we restart the PC.

Today I ran sfc /scannow. "Windows Resource Protection found corrupt files but was unable to fix some of them.

Then I ran Dism /Online /Cleanup-Image /ScanHealth, "The component store is repairable, The operation completed sucsesfully"

Then I ran Dism /Online /Cleanup-Image /RestoreHealth, "Error: 0x800f081f The source files could not be found."

Now I dont know what to do, the other thread advised doing some other Dism but stating a source file. But I dont know how to do that, or anything with ISO files and all of that.

If someone could advise me what to do, or try to help, I would appreciate it.

More replies
Relevance 88.15%

Hello all, I will try to explain my problem as clear as I can. I am not super tech savvy, so I need your help.

I found a thread that seemed to have the same problem but it did not fix mine.

Before I upgraded from Windows 8.1 to 10, everything worked fine. Now it has been around 2 weeks since the upgrade and I am running into a problem. My user on the PC seems to be working fine, but when the other person trys to log into her account on the PC things go weird.

First it was signing her in with a temporary account, this was solved by logging her in later.

Now it just takes a much longer time to load things when we start up our accounts. Sometimes the PC was freezing and we were not able to do anything, unless we restart the PC.

Today I ran sfc /scannow. "Windows Resource Protection found corrupt files but was unable to fix some of them.

Then I ran Dism /Online /Cleanup-Image /ScanHealth, "The component store is repairable, The operation completed sucsesfully"

Then I ran Dism /Online /Cleanup-Image /RestoreHealth, "Error: 0x800f081f The source files could not be found."

Now I dont know what to do, the other thread advised doing some other Dism but stating a source file. But I dont know how to do that, or anything with ISO files and all of that.

If someone could advise me what to do, or try to help, I would appreciate it.

More replies
Relevance 76.67%

Gone through this multiple times now, just at a loss.
sfc /scannow
results in Windows Resource Protection found corrupt files but was unable to fix some of them.  Details are included in the CBS.Log windir\Logs\CBS\CBS.log. Which can be found at the link below after using the command copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
 https://www.dropbox.com/s/38eq76sq3nrp14i/cbs.txt?dl=0
 
Running DISM /Online /Cleanup-Image /RestoreHealth results in Error:0x800f081f The source files could not be found.
 
 
DISM /Online /Cleanup-Image /ScanHealth reports component store is repairable and the operation completed successfully.
 
But running DISM /Online /Cleanup-Image /StartComponentCleanup ends up with Error: 6800 The Function attempted to use a name that is reserved for use by another transaction. The log can be downloaded at the link below.https://www.dropbox.com/s/e3c13aalcjt00qr/dism.txt?dl=0
 
 
Also of note is when trying to run a backup from Control Panel's Backup and Restore (Windows 7) I get the following dialog box twice: Windows could not enable the automatic backup job for the following reason: The system cannot find the file specified. (0x80070002)
Try again.
 
Then the Backup begins to progress and ultimately fails later. Where as before switching this computer to Windows 10 I had no issue. *update* Just finished running backup successfully. That's one good thing that has happened thus far.
 
Help on... Read more

More replies
Relevance 75.85%

I was trying to fix a problem with my laptop after upgrading to Windows 10 which caused updates to fail. I went and looked at Microsoft support and tried using sfc and dism. Sfc /scannow found corrupt file but couldn't fix them. Dism /online /cleanup-image /restorehealth and dism /online /cleanup-image /restorehealth /Source:esd:E:\Sources\Install.esd:1 /limitaccess both came up with the error 0x800F081F. Another issue is that my computer won't shut off completely. The screen goes blank and the hard drive light is blank after the computer turns off, but the fan and the power button is still on.

Answer:Windows File Corruption Can't Be Fixed with Sfc or DISM, 0x800F081F

blueboxbeing said:

I was trying to fix a problem with my laptop after upgrading to Windows 10 which caused updates to fail. I went and looked at Microsoft support and tried using sfc and dism. Sfc /scannow found corrupt file but couldn't fix them. Dism /online /cleanup-image /restorehealth and dism /online /cleanup-image /restorehealth /Source:esd:E:\Sources\Install.esd:1 /limitaccess both came up with the error 0x800F081F. Another issue is that my computer won't shut off completely. The screen goes blank and the hard drive light is blank after the computer turns off, but the fan and the power button is still on.



Hello blueboxbeing and welcome to TenForums.

Please try turning off "Fast Startup" and then give your laptop a few good shutdowns (not restarts).

Fast Startup - Turn On or Off in Windows 10 - Windows 10 Forums

sfc /scannow sometimes need to be run 2, 3 or even 4 times depending on the corruptions it finds. Please run it a few more times after you've turned off Fast Startup, rebooting between each run. If it still says some files could not be repaired, please open an Administrative Command Prompt and type:

findstr /C:"[SR]" %windir%\logs\CBS\cbs.log >"%userprofile%\Desktop\sfcdetails.txt"

and press ENTER.

This will grab the necessary info and put it in a file on your desktop called sfcdetails.txt. You can zip that up and upload it here.

3 more replies
Relevance 74.62%

I have upgraded 5 machines and clean installed 3 machines.

Experienced an issue with one machine with continuous corruption problems

After the 3rd attempt I discovered that even with a Clean Install of Win 10 I get unrepairable errors - Sorry I don't have screen captures of the "exact" wording:

(Just to be clear, I have not installed ANYTHING ELSE, other than Windows 10 and the corruption is unrepairable immediately)

Heres what I did to find the issue;

Open CMD in Administrator (type cmd in Cortana search bar, RIGHT CLICK and select "Run as Administrator")

After using command:

sfc /scannow

Windows reports errors which cannot be repaired

Running the following command should repair the issue:

DISM /Online /Cleanup-Image /RestoreHealth

BUT DOESN'T - You get this message:

Deployment Image Servicing and Management tool
Version: 10.xxxxxxxxx
Image Version: 10.xxxxxxxxx
[==========================100.0%==========================]
Error: xxxxxxxxx
The source files could not be downloaded. Use the "source" option to specify the location of the files that are required to restore the feature.

For more information, review the log file.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

I have tried a few different options, including mounting the ISO and directing the DISM command to look directly on the mounted drive

Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:D:\sources\install.wim:1 /limitaccess
(where "D" i... Read more

More replies
Relevance 66.83%

Hi, I am not able to fix image or file corruption. I don't have the ability to make  a disc. Can you please help me get a shared file to do this, or the shared file path to enter into the path directory?  Also, this is information that I read to do, and I really don't know even where my image is other than in the C drive. I have attached some files. I will also paste in the section below.
 
Lenovo G580
Win 8.1 64 bit
 
2016-04-03 18:29:26, Info                  CSI    00000004 [SR] Verifying 100 (0x0000000000000064) components
2016-04-03 18:29:26, Info                  CSI    00000005 [SR] Beginning Verify and Repair transaction
2016-04-03 18:29:29, Info                  CSI    00000006 [SR] Verify complete
2016-04-03 18:29:29, Info                  CSI    00000007 [SR] Verifying 100 (0x0000000000000064) components
2016-04-03 18:29:29, Info                  CSI    00000008 [SR] Beginning Verify and Repair transaction
2016-04-03 18:29:31, Info    ... Read more

Answer:DISM error code Error 0x800f0906 while running DISM command - Windows 8.1

Hi, I ran the sfc /scannow command in the command prompt that is opened by itself in boot options. It said that it fixed something, and this is the log. I still haven't been able to download windows yet, and the sfc /scannow doesn't work when the operating system; also, the sfc /scannow command repeated what it said in the command prompt before windows loads, so I don't know that it was successful as it said it would fix on boot, this was the second time also that is said it fixed something. Attached, is the log.
 CBS.log   246.1KB
  1 downloads

3 more replies
Relevance 63.96%

Hello, as you already know from the title I have problems with the windows utilities that fix corruptions. After I upgraded to build 1607, those utilities worked, but now after a few weeks I tried to do them again after some driver updates just to be sure and now they find corruptions and can't fix them. I modified my windows a bit, nothing too serious, but since then after getting the errors I reverted them back to win default ( I think I did all of them, not 100% sure, since I don't write down my modifications... silly me) Here are the logs from an hour or so ago, when I tried the DISM / SFC combo. Please help

Answer:Windows DISM and SFC fail to fix corruptions. DISM error 1726 / WIN 10

All of the CSI Payload corrupt warnings reference .lnk files only. These are File Explorer shortcuts only, not actual binary files themselves. I wouldn't worry about them unless you're noticing issues related to the files they "touch." Try accessing cleanmgr.exe at the command line (or in the run dialog box) and see if it works. If it does, that tells me Explorer still knows where to find things without the shortcuts. Worst case, you can always navigate to these items manually.

OTOH, if you have access to the ISO from which you made your most recent install, you can use that install.wim (from the \Sources folder) as the target for the /source parameter in the DISM command. This should find those missing links (pun intended) and set you straight.
HTH,
--Ed--

1 more replies
Relevance 63.96%

Hello, as you already know from the title I have problems with the windows utilities that fix corruptions. After I upgraded to build 1607, those utilities worked, but now after a few weeks I tried to do them again after some driver updates just to be sure and now they find corruptions and can't fix them. I modified my windows a bit, nothing too serious, but since then after getting the errors I reverted them back to win default ( I think I did all of them, not 100% sure, since I don't write down my modifications... silly me) Here are the logs from an hour or so ago, when I tried the DISM / SFC combo. Please help

Answer:Windows DISM and SFC fail to fix corruptions. DISM error 1726 / WIN 10

All of the CSI Payload corrupt warnings reference .lnk files only. These are File Explorer shortcuts only, not actual binary files themselves. I wouldn't worry about them unless you're noticing issues related to the files they "touch." Try accessing cleanmgr.exe at the command line (or in the run dialog box) and see if it works. If it does, that tells me Explorer still knows where to find things without the shortcuts. Worst case, you can always navigate to these items manually.

OTOH, if you have access to the ISO from which you made your most recent install, you can use that install.wim (from the \Sources folder) as the target for the /source parameter in the DISM command. This should find those missing links (pun intended) and set you straight.
HTH,
--Ed--

1 more replies
Relevance 63.55%

Hello,

I've run into a problem where my windows apps will not open.
Calc opens with a gray screen just showing the calculator logo...calendar opens to a blue screen only showing the calendar logo, etc.

I can't run SFC /scannow due to error "Windows Resource Protection could not start the repair service"

To fix SFC, I've tried to run DISM /Online /Cleanup-Image /ScanHealth
I've also tried: Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:J:\sources\install.wim:1 /limitaccess

this gives me "Error: 1812 An initialization error occurred, for more info review the log"
dism.zip
CBS.zip

I ran a chkdsk /r earlier today, but didn't stick around for the results -- did not resolve the issue
Using an 840 EVO SSD which makes me slightly skeptical for any disk errors, but tried it anyway

Windows 10 64 bit [10.0.10240]
I've researched the this error as much as I can to no avail. All I've found is a Microsoft employee stating to reinstall windows...and that is currently not an option for me.

Thank you for your help

Answer:DISM Error: 1812 - Can't run DISM or SFC, Win apps won't open

You can try image - health in my sig below..

Run option 1 and follow through

15 more replies
Relevance 57.4%

Hello I am running Windows 10 64-bit, I want to install Net Framework 3.5. I keep getting the error: 0x800f081f when I use this line: Dism /online /enable-feature /featurename:NetFx3 /All /Source:D:\sources\sxs /LimitAccess - I am using an ISO of the Windows Media software, it is mounted as Drive D and the Net Framework 3.5 source is found in the file explorer, but why can't the CDM install it?
This is the full CMD message:
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
Enabling feature(s)
[==========================100.0%==========================]
Error: 0x800f081f
The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see click here DISM log file can be found at C:\Windows\Logs\DISM\dism.log
Press any key to continue . . .
Any advice?
The

More replies
Relevance 57.4%

Store not opening-Edge stopped opening (just shows for a second)
Appears to have happened after update?

Answer:Error 0x800f081f in Win 10

JohnJ said:

Store not opening-Edge stopped opening (just shows for a second)
Appears to have happened after update?



If you receive Windows Update error 0x800F081F or 0x800F081F it means that a file needed by Windows Update is damaged or missing.
Windows has troubleshooting tools that can help you address this problem.


Run the DISM tool


1. Swipe in from the right edge of the screen, and then tap Search.
(If you're using a mouse, point to the lower-right corner of the screen, move the mouse pointer up, and then click Search.)


2.Enter command prompt in the search box.


3.In the list of results, press and hold or right-click Command Prompt, and then tap or click Run as administrator. Administrator permission required You might be asked for an admin password or to confirm your choice.


4.In the Administrator: Command Prompt window, type the following commands. Press the Enter key after each command:

dism.exe /online /cleanup-image /scanhealth

dism.exe /online /cleanup-image /restorehealth


5.To close the Administrator: Command prompt window, type exit, and then press Enter.


6.Run Windows Update again.


If you continue to see this error, try the Windows Update Troubleshooter, or go to the Microsoft Community website for more assistance.

Error codes this applies to:

?WindowsUpdate_800F081F


?0x800F081F


Source
Windows Update error 0x800F081F - Windows Help

3 more replies
Relevance 57.4%

Store not opening-Edge stopped opening (just shows for a second)
Appears to have happened after update?

Answer:Error 0x800f081f in Win 10

Originally Posted by JohnJ


Store not opening-Edge stopped opening (just shows for a second)
Appears to have happened after update?



If you receive Windows Update error 0x800F081F or 0x800F081F it means that a file needed by Windows Update is damaged or missing.
Windows has troubleshooting tools that can help you address this problem.


Run the DISM tool


1. Swipe in from the right edge of the screen, and then tap Search.
(If you're using a mouse, point to the lower-right corner of the screen, move the mouse pointer up, and then click Search.)


2.Enter command prompt in the search box.


3.In the list of results, press and hold or right-click Command Prompt, and then tap or click Run as administrator. Administrator permission required You might be asked for an admin password or to confirm your choice.


4.In the Administrator: Command Prompt window, type the following commands. Press the Enter key after each command:

dism.exe /online /cleanup-image /scanhealth

dism.exe /online /cleanup-image /restorehealth


5.To close the Administrator: Command prompt window, type exit, and then press Enter.


6.Run Windows Update again.


If you continue to see this error, try the Windows Update Troubleshooter, or go to the Microsoft Community website for more assistance.

Error codes this applies to:

?WindowsUpdate_800F081F


?0x800F081F


Source
Windows Update error 0x800F081F - Windows Help

3 more replies
Relevance 56.99%

Whenever I try to use anything that uses .NET Framework I need to re download it. The problem is that whenever i try to the error message "Windows couldn't find the required files to complete the requested changes. Make sure you're connected to the internet and try again". I'm certainly connected to the internet and I'm putting this down to windows 10 as this problem didn't occur before.

Any suggestions?

More replies
Relevance 56.99%

Hello, I have a similar problem to the one solved here:http://www.bleepingcomputer.com/forums/t/585630/dismexe-restorehealth-error-0x800f081f/
I was hoping that I could get some help solving my issue since diesel1218's was resolved quickly.
 
This is my cbs.txt:
 
https://drive.google.com/file/d/0BydfQs5PPwYBdWlxaTN2aGY5ZzA/view?usp=sharing
 

More replies
Relevance 56.99%

Hello all
I'm currently having problems with installing the SP1, any help would be aprechiated

Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting

Answer:Windows 7 SP1 Error: 0x800F081F

Did you use the link to download and run the System Update Readiness Tool as shown in your screenshot?

If not, you need to do that to see what transpires.

If SURT doesn't cure the problem then click through to the link Microsoft gives you in the warning dialog box for help from them.

You may find this link useful too. Support for Microsoft Update technical problems - troubleshooting

6 more replies
Relevance 56.99%

I have been trying to update my Surface pro 3 since November. Every time it tries to update I get this error. Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3213986) - Error 0x800f081f
I cant seem to figure out how to fix this issue. I have tried the SFC and DIMS commands but the SFC one says the process could not be started. I downloaded the media tool and tried to update my windows 20 but after doing everything it said it failed the to update. I made an ISO file burned to my SP3 HD but I don't know what to do with it? I have checked many forms and think I need to use the ISO file and point the DISM to it to use for refreshing my windows 10 system files but I don't know how to do that.
Does anyone know how to fix this issue?
Thank you

Answer:(KB3213986) - Error 0x800f081f

Hi You could try to install this latest Cumulative update with the exe.file You will find it here in the Windows update catalog! https://www.catalog.update.microsoft...px?q=KB3213986
Have you considered a in-place repair? https://answers.microsoft.com/en-us/...7-f40096ec3085
Let me know how things go for you!

0 more replies
Relevance 56.99%

I have been trying to update my Surface pro 3 since November. Every time it tries to update I get this error. Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3213986) - Error 0x800f081f
I cant seem to figure out how to fix this issue. I have tried the SFC and DIMS commands but the SFC one says the process could not be started. I downloaded the media tool and tried to update my windows 20 but after doing everything it said it failed the to update. I made an ISO file burned to my SP3 HD but I don't know what to do with it? I have checked many forms and think I need to use the ISO file and point the DISM to it to use for refreshing my windows 10 system files but I don't know how to do that.
Does anyone know how to fix this issue?
Thank you

More replies
Relevance 56.17%

Hey Everyone,

For a couple of days now, I've been trying to fix a couple of errors on Windows Update. Before my Windows wasn't genuine, so when I activated it, a lot of updates flooded in, I think about 140?

I've been struggling to install:

Update for Windows (KB2732059)
Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 SP1 x86 (KB2978120)

And a couple of Display Language Packs, everytime I try to install the Display Language Packs, they fail, along with the Update for Windows. It said I successfully installed the Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 SP1 x86 (KB2978120) but when I check for updates, it still comes up.

I ran the Windows Update Trouble Shoot, and the only problem it found was:

Windows Update error 0x800F081F (2015-07-26-T-04_10_38P) Not Fixed

I'm also running SFC /SCANNOW in CMD, and it's 75% completed.

I've also tried to install the updates individually from the Windows Download Center, but they still don't work.

Just checked for updates again, and a new optional one came up along with the display language packs:

Definition Update for Microsoft Security Essentials - KB2310138 (Definition 1.203.487.0)

This update has also failed a couple of times.

At the moment I'm trying to install this update, along with the Update for Windows and the .NET Framework one, I'll post the results.

I'm trying to attack my CBS.zip file, but it won't upload, it keeps saying the page is unavailable.

Answer:Windows 7 Update Error 0x800F081F

Finished the SFC Scan and it said:

Windows Resource Protection did not find any integrity violations.

Oh and when I tried installing:

Definition Update for Microsoft Security Essentials - KB2310138 (Definition 1.203.487.0)
Update for Windows (KB2732059)
Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 SP1 x86 (KB2978120)

I got the error: Code 80246007

The Definitions one succeeded but the .NET Framework one and the Update for Windows failed.

While Windows Updates was trying to install them, MSE was on.

2 more replies
Relevance 56.17%

Hi Guys

apologies if this is the wrong forum...

I have just upgraded a new dell laptop i7 / 16gb ram from windows 8.1 pro to windows 10 pro and all went fine.

I need to install sql server management studio 2014 on it, but it requires .net 3.5 first, so I have gone into the windows features and added this in and it keeps bringing back error code 0x800F081F after trying to download the files from windows update.

I have done some research and amended "Specify settings for optional component installation and component repair" in the group policy but that has not made any difference.

I am logged in as a admin / have turned off all firewalls, but am stumped.

Any help would be great, many thanks

Steve

Answer:install .net 3.5 gives error code 0x800F081F

You can use the following tool, it was designed for windows 8, but it's working with Win10.

Download Microsoft .NET Framework 3.5 Offline Installer for Windows 8 and Later - AskVG

3 more replies
Relevance 56.17%

have done all updates prior to SP1 used System Update Readiness Tool, it fixed 2 problems but still get the top error,

any help, or links, thanks guys
 

Answer:Windows 7 Sp1 install error 0x800f081f

Are you having a problem getting SP1 to install?

If so, I had the same problem. Nothing I did (I also ran the system readiness tool as well as lots of fixes I found on the internet) would allow me to install SP1.

I ended up downloading the ISO of Windows 7 with SP1 included and that installed (with the key I had) with no problem.

download link http://www.w7forums.com/threads/official-windows-7-sp1-iso-image-downloads.12325/
 

2 more replies
Relevance 55.35%

As stated in the title, I keep getting this error whenever I try to install SP2 (through windows update). I'm not that tech savvy and any help/suggestions would be appreciated.

Answer:Windows Vista SP2 Installation: Error 0x800F081F Help

hi i found this on your issue curtesy of eggheads cafe
0x800F081F CBS_E_SOURCE_MISSING
The source for the package or file not found

Any chance there's a beta build of SP2 still installed?

How to troubleshoot Windows Vista and Windows Server 2008 service pack
installation issues:
http://support.microsoft.com/kb/947366

Free unlimited installation and compatibility support is available for
Windows Vista, but only for Service Pack 2 (SP2). This support for Windows
Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of
chat or e-mail support differs depending on your geographic location. Go to
http://support.microsoft.com/oas/def...4&gprid=582034 &
select appropriate category (e.g., Installation).

Installation Tips:

? Your computer will restart several times during the installation process:
Make certain you've saved your work and closed all open applications before
beginning the install.

? Disable (1) your anti-virus application, (2) any real-time system
protections afforded by any anti-spyware applications (except Defender), &
(3) your third-party firewall (if any) and then (4) enable the Windows
Firewall _before installing or uninstalling_ Vista SP2.

? The installation process can take an hour or more: If you're installing
SP2 on a portable computer, make sure that you plug-in the power cord and
have the battery inserted into its bay.
--
Vista-specific newsgroup:

~Robear Dyer (PA Bear)
MS MVP-IE,... Read more

1 more replies
Relevance 55.35%

Hi,
I have downloaded and run the SFCFix.exe and still experience an error trying to load the windows 7 service pack 1. would appreciate any help...
thanks Tim

Answer:Windows 7 SP1 fails install, error 0x800f081f

It looks like this is the cause of your problems...

Code:
Checking Component Store
(f) CSI Missing Winning Component Key 0x00000000 x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.1801_none_516953ad0f4d16c4

Summary:
Seconds executed: 269
Found 1 errors
CSI Missing Winning Component Key Total count: 1
This could be a very difficult one to get right, as it's one of the ones for Visual C++ and these updates are a bit of a law unto themselves
I would suggest attempting to uninstall all versions of Visual C 2005 - it should be in your installed Programs listing (leave any other Visual C installs alone such as 2008/2012 etc)
succeed or fail, then run a new CheckSUR scan and post the new log.

8 more replies
Relevance 55.35%

Hi,

Getting "sfc /scannow" and "DISM /Online /Cleanup-Image /RestoreHealth" issues.

It seems that I'm not able to fix some corruption.
The main reason I stared with SFC command was that my icons on my task bar, disappeared.

SFC found issues but was unable to resolve them.

I ran the following commands:

Dism /Online /Cleanup-Image /CheckHealth
Dism /Online /Cleanup-Image /ScanHealth
DISM /Online /Cleanup-Image /RestoreHealth

I also used "DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:\Install.wim:1 /LimitAccess"
to point to my X drive which is my external drive that has Install.wim file.

The error I'm getting is:

Code:
C:\WINDOWS\system32>DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:\Install.wim:1 /LimitAccess
Deployment Image Servicing and Management toolVersion: 10.0.14393.0Image Version: 10.0.14393.0
[===========================91.5%===================== ]
Error: 0x800f081f
The source files could not be found.Use the "Source" option to specify the location of the files that are required to restore the feature.
For more information on specifying a source location, see http://go.microsoft.com/fwlink/?LinkId=243077.The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

This is the dism.log file output:
dism.log - Pastebin.com

Can anyone help please?

Answer:Error: 0x800f081f The source files could not be found

Unfortunately, the error message does not give you much to go on. The error you are getting can be caused by a mis-match between your downloaded file and the version of Windows you are running. They must match. Another cause could be trying to use a ESD version with ISO parameters and vice versa. Check the version of your download with the following command issued from an admin prompt:

dism /Get-WimInfo /WimFile:H:\sources\install.wim /index:1

where H is the mounted drive for the ISO.

If it does not find the source file, change install.wim above to install.ESD. The same is true when you run the Dism command with "restorehealth". These two errors are the most common causes for your issues.

5 more replies
Relevance 55.35%

I tried doing the steps found in this guide:
DISM - Fixing Component Store Corruption in Windows 8

but option 1 failed

i tried option 2 and it also failed this is what i got on the 3rd command:

Answer:error 0x800F081F trying to install update for windows 8.1

Take look here:
Windows Update error 0x800F081F - Microsoft Windows Help
Windows Update error 0x800F081F - Microsoft Windows Help
Fix Windows corruption errors such as 0x80070002 and 0x80070057

How to Fix Errors 80070020, 80073712, and 0x800f081f on Windows 8.1 Update

4 more replies
Relevance 55.35%

I'm desperate...There are 2 weeks i'm trying to fix DISM corruption without success.. i've read a tons of post hope to find any dolution from you guys.
Here's what i did until now





Windows PowerShell
Copyright (C) 2015 Microsoft Corporation. All rights reserved.
PS C:\WINDOWS\system32> Dism /Online /Cleanup-Image /CheckHealth
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
The component store is repairable.
The operation completed successfully.
PS C:\WINDOWS\system32> Dism /Online /Cleanup-Image /RestoreHealth
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
[==========================100.0%==========================]
Error: 0x800f081f
The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see
http://go.microsoft.com/fwlink/?LinkId=243077.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
PS C:\WINDOWS\system32>



So i've googled (https://www.tenforums.com/tutorials/7...-10-image.html) and discovered could be helpful use .wim image, so i've mounted Windows 10 PRO
x64.iso created with Microsoft Tool for my Windows 8.1 upgrade but... NO LUCK... so i've tried to load following:
1.Download DISM GUI - Download: DISM GUI 4.0 , right click and run as Administrator
2.On... Read more

Answer:Hopeless with Windows 10 & the Infamouse Error 0x800f081f

Make a backup image of your current installation, wipe it out and do a clean install?

21 more replies
Relevance 55.35%

I'm desperate...There are 2 weeks i'm trying to fix DISM corruption without success.. i've read a tons of post hope to find any dolution from you guys.
Here's what i did until now





Windows PowerShell
Copyright (C) 2015 Microsoft Corporation. All rights reserved.
PS C:\WINDOWS\system32> Dism /Online /Cleanup-Image /CheckHealth
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
The component store is repairable.
The operation completed successfully.
PS C:\WINDOWS\system32> Dism /Online /Cleanup-Image /RestoreHealth
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
[==========================100.0%==========================]
Error: 0x800f081f
The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see
http://go.microsoft.com/fwlink/?LinkId=243077.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
PS C:\WINDOWS\system32>



So i've googled (DISM - Repair Windows 10 Image) and discovered could be helpful use .wim image, so i've mounted Windows 10 PRO
x64.iso created with Microsoft Tool for my Windows 8.1 upgrade but... NO LUCK... so i've tried to load following:
1.Download DISM GUI - Download: DISM GUI 4.0 , right click and run as Administrator
2.On the fist tab, click on ... Read more

Answer:Hopeless with Windows 10 & the Infamouse Error 0x800f081f

Make a backup image of your current installation, wipe it out and do a clean install?

21 more replies
Relevance 55.35%

Hello,
Recently I have downloaded a few things that require the .NET framework 3.5. When I go to download/ install this, it moves realy fast, then stops and says: "Windows couldn't complete the requested changes" with the error code '0x800F081F'. I have been trying to do this for weeks now, and keep getting this error. When I go online for help, I cannot find anything on this. Anyone have any ideas? Any help will be greatly appreciated.

Some things to note:
I downloaded Windows 8 (Pro, 64)
Earlier in the summer, my computer had a problem and I had to refresh it.

Answer:.NET framework not installing (Error code 0x800F081F)

From Windows Update Error search..

Windows Update error 0x800F081F - Microsoft Windows Help

Worth a try

2 more replies
Relevance 55.35%

Hi,

Getting "sfc /scannow" and "DISM /Online /Cleanup-Image /RestoreHealth" issues.

It seems that I'm not able to fix some corruption.
The main reason I stared with SFC command was that my icons on my task bar, disappeared.

SFC found issues but was unable to resolve them.

I ran the following commands:

Dism /Online /Cleanup-Image /CheckHealth
Dism /Online /Cleanup-Image /ScanHealth
DISM /Online /Cleanup-Image /RestoreHealth

I also used "DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:\Install.wim:1 /LimitAccess"
to point to my X drive which is my external drive that has Install.wim file.

The error I'm getting is:

Code:
C:\WINDOWS\system32>DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:\Install.wim:1 /LimitAccess
Deployment Image Servicing and Management toolVersion: 10.0.14393.0Image Version: 10.0.14393.0
[===========================91.5%===================== ]
Error: 0x800f081f
The source files could not be found.Use the "Source" option to specify the location of the files that are required to restore the feature.
For more information on specifying a source location, see http://go.microsoft.com/fwlink/?LinkId=243077.The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
This is the dism.log file output:
dism.log - Pastebin.com

Can anyone help please?
 

Answer:Error: 0x800f081f The source files could not be found

Hi gil and welcome to PCHF

Please download MiniToolBox and save it to your desktop. Run the program by right clicking on it and selecting Run as administrator. When the program opens select the following boxes:

Flush DNS
Report IE Proxy Settings
Reset IE Proxy Settings
Report FF Proxy Settings
Reset FF Proxy Settings
List content of Hosts
List IP Configuration
List Winsock Entries
List last 10 Event Viewer Errors
List Installed Programs
List Devices (Only Problems)
List Users, Partitions and Memory size

Please post the log in your next reply
 

5 more replies
Relevance 54.94%

I recently upgraded my 64-bit Windows 10 system to version 10.0.105860.0. Most of the time it's OK, but sometimes after leaving it in 'Sleep' mode it comes up with a error when re-activated. I therefore ran sfc / scannow. This came up with some corrupt files that it couldn't fix. Following advice from the web site How-to-Geek, I ran the Deployment Image Servicing and Management Tool in an Administrator elevated Command Prompt window.
This reported "Error: 0x800f081f. The source files could not be found". The Command Prompt window goes on to say "Use the 'Source' option to specify the location of the files that are required to restore the feature". It goes on to say For more information on specifying a source location, see click here I looked at that Microsoft web site and decided it's too involved for my low-level of expertise! I also Googled 0x800f081f and the Windows Forum web site came up with a long string of posts from users having the same problem after updating to version 10.0.10586.0 - some suggestion that it's a bug in the update.
Is there a simple routine that I can download and run (like the Microsoft Fit-It routines) that will locate the corrupt files and then download replacements for them from a Microsoft database? If not, how can I (a) find out which files are corrupt (possibly from the DISM log?) and (b) access a database of new replacement non-corrupt files?

Answer:Windows 10 Error 0x800f081f -Source file not found

you need to point the tool to your windows image you installed from (provided he download isn't corrupted)

10 more replies
Relevance 54.94%

My phone is running build 10586.122 . I have been trying to update to build 10586.164 since 3 days. My phone downloads the new build, but shows this error code 0x800f081f each time the installation touches 100% and starts over again. Tried both soft and hard reset but the problem still persists. Can anyone help me on this?

Answer:Can't install build 10586.164. Error code 0x800f081f

I have the same issue. My 830 updated from 8.1 last night to build 10.0.10586.107 but now it says there's another update (build 10.0.10586.164) but it won't install fails with 0x800f081f. I was going to try a hard reset but as you've done this and it didn't work I'll leave it.
Have you got this sorted?

more replies
Relevance 54.94%

i am trying to install another software package and it requires .net  3.5 and sends me to Microsoft download to install this.  it runs for a while and says it cannot install   and gives the error-code 0x800f081f
 
intet nuv  with i5     8 gb     and 240 gb storage 
 
 
any ideas
 
Thanks
Richard
 
  

Answer:will not install .net framework 3.5 on windows 8.1 error code 0x800f081f

i posted this in vista by accident,     the search i did brought up responses in vista and i didn't switch back to windows 8

3 more replies
Relevance 53.71%

 
I had movie maker on my laptop computer but noticed that it did not have the sound recorder like some of the later versions. So I tried to install the newer version and then something did not work out.  I could not find movie maker on my system. When
I tried to download windows essentials 2012 which includes the movie maker it suggested that I already had it on my system but I cannot find in program files or program (x86) files.
 
So then I went to a link on Microsoft support and followed the steps and got the sfc details. I am unable to post the link right now but will do so soon.
 
From the sfc details, I gathered the problems files -
Amd64\CNBJ2530.DPB
 
Then the next steps were to take ownership of the files and then replace them with files copied from another computer that has windows 8.1.
 
I have not yet been able to do the "take ownership" step as I tried many combinations of
commands at the
elevated command prompt but none has worked so far.
 
 
I also tried doing what was suggested in a link:
 To fix corrupt windows system files in the answers thread on your website.
I am unable to post the link here. But it had to do with DISM clean up and restore health.
 
And I got this:
 
Error: 0x800f081f
 
The source files could not be found.
Use the "Source" option to specify the location of the files that are required t
o restore the feature. For more information o... Read more

More replies
Relevance 51.66%

Hey,

So im trying to clean up my PC, FRESH install w/current updates

followed @BRINK guide to

DISM

and keep getting this error

tried in normal mode and SAFE

**Update tried running SFC /SCANNOW again will post sfcdetails

More replies
Relevance 51.25%

Hello.
I wonder if you can help me.
I keep getting error 0x800f0906 when running DISM /Online /Cleanup-Image /RestoreHealth.


DISM /Online /Cleanup-Image /RestoreHealth
Deployment Image Servicing and Management tool
Version: 6.2.9200.16384
Image Version: 6.2.9200.16384
[==========================100.0%==========================]
Error: 0x800f0906
The source files could not be downloaded.
Use the "source" option to specify the location of the files that are required to restore the feature.
For more information, review the log file.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
*********************
relevant bits from it seem to be:
Checking System Update Readiness.

(p)    CSI Payload Corrupt            amd64_microsoft-windows-windowsupdateclient-ui_31bf3856ad364e35_7.8.9200.16927_none_28265fa316d944b7\wuaext.dll
Repair failed: Missing replacement payload.
(p)    CSI Payload Corrupt            amd64_microsoft-windows-windowsupdateclient-ui_31bf3856ad364e35_7.8.9200.16927_none_28265fa316d944b7\wushareduxresources.dll
Repair failed: Missing replacement payload.

Summary:
Operation: Detect and Repair
Operation result: 0x800f0906
Last Successful Step: Entire operation completes.
Total Detected Corruption:    2
    CBS Manifest Corruption:    0
   &nb... Read more

Answer:Error when running DISM /Online /Cleanup-Image /RestoreHealth - error 0x800f0906

Hi,
Please upload the DISM.log files into OneDrive and post us the link here. The DISM log file can be found at
C:\Windows\Logs\DISM\dism.log.
Besides, for the CSI payload corrupt issue, please take a try to reset the Windows update components. Then try to run the command and check the results:
Follow this guide: How do I reset Windows Update components?
In addition, update the system to Windows 8.1 will make a better usage of the features and functions offered.
Windows 8.1 and Windows RT 8.1 build on
Windows 8 and Windows RT, to bring you enhancements in personalization, search, apps, the Windows Store, and cloud connectivity, and has the security and reliability features you expect from Windows. It's fast and made to work
on a variety of devices?especially on the new generation of touch devices.
For more information regarding update to Windows 8.1 from Windows 8. please see:
Update to Windows 8.1 from WIndows 8
Best regardsMichael Shao
TechNet Community Support

5 more replies
Relevance 50.43%

hi all,
i have a problem with a corrupt MSIEXEC.EXE (0 corrupt )  and some more , copy from another Server with Takecalcs and icalc work fine but in SFC Verify the file is always corrupt.
with 
DISM /ONLINE /CLEANUP-IMAGE /RESTOREHEALTH 
ERROR 87
How can we point SFC to a Windows ISO ?

More replies
Relevance 50.43%

Greetings.

How can I identify what file(s) are corrupted and can I use the P50t files as a repair source? If so, what do I do? I can follow instructions, most times

Here is the problem:
My wifes laptop, a Toshiba P840 (running 8.1 64bit) has a problem. I also have a Toshiba laptop, a P50t (running 8.1 64bit). On mine, I ran sfc /scannow which found corrupted files. Using this forum as a guide, I ran the DISM cleanup tool, which fixed the problem(s). sfc /scannow is error free.

Ran sfc /scannow on the P840 which found corrupted files. Ran the DISM cleanup tool. It failed with this report: "error: 0x000f0906 The source files could not be downloaded. Use the "source" option to specify the location of the files that are required to restore the feature," etc, etc.

I was puzzled as to why one laptop would obviously download the required files but not the other. Thinking that it might be that I have Windows Update set to notify me of updates but not download them, I changed the setting to allow updates automatically.

I ran DISM Cleanup tool again and it failed again, reporting this: "The restore operation failed. Either the repair source was not found or the component store cannot be repaired. Error: 0x00f081f. DSIM Failed. No operation was performed."

The DISM log file looks strange (not that I have ever seen one before). I will copy/paste some of it here. Once it gets into the "Chinese/Japanese" characters, they go on forever, lol) Th... Read more

Answer:DISM /Cleanup-Image - DISM Failed - What To Do Next Please

Wondering if the same file has been posted on before:
"FIOReadFileIntoBuffer1415): The filename, directory name, or volume label syntax is incorrect"

I came across this post"
Dism online restore health function gets error 0x80240021

It has the same file name. I will not do anything until instructed.

Sorry about the Sad faces but I am not guilty, that's the way the file name is written.

12 more replies
Relevance 50.43%

Normally when a tests completes without reporting anything wrong I'm happy camper.
I have been wanting to ask a question about the DISM "scan" completing rather quickly.

I seem to remember the command taking some time to finish, but for a while now the command Dism /Online /Cleanup-Image /RestoreHealth takes only 2 min 45 sec. Is that a concern ? Is it running correctly ?

I understand that each machine will complete the command at different times, but I'm comparing it to what it used to take on my machine.

Answer:DISM: How long should the DISM scan take to complete ?

Mine takes about (or slightly less than) 3 minutes. As long as you get a successful completion notice, you should be OK. I agree that it does seem to run more quickly than in the past.

Hope this helps.

regards,

WOT

2 more replies
Relevance 50.02%
Question: Dism Error 2

I typed in "dism /Image:C:\ /Add-Drive / Driver:G:\ /Recurse" and got the error in the title. I can't figure out what's wrong, there aren't any special folders to open or anything (the files and stuff are on a blank thumbdrive hence the 'g')
but for whatever reason it says it is unable to access image

More replies
Relevance 50.02%
Question: DISM error 2

Hi Im trying to inject unsigned drivers with dism but i keep getting an error 2 message

Im snipped the message as an attachment and put the dism log file.

More replies
Relevance 50.02%
Question: Dism and sfc error

Hello.
When I run the Dism command/online /Cleanup-Image /RestoreHealth receipt error 0X800F081F, and when I run the sfc gives me as a result files that cannot be recovered. Can anyone help me?
Thanks a lot.
Best regards.

Answer:Dism and sfc error

The error is an error that says it can't find the source files.
Use this link to help provide source files (if you have the installation media):  https://technet.microsoft.com/en-us/library/hh824822.aspx
 
More advice from this google search:  https://www.google.com/search?q=dism+source&ie=utf-8&oe=utf-8
 
Most "fixes" are people reporting that they reinstalled Windows in order to fix it.
Good luck!

5 more replies
Relevance 50.02%
Question: DISM error 127

I am running adb shell in Administrator: Command Prompt which starts daemon successfully and gives a UNIX style prompt as follows: [email protected]: / $. HWY360 is my phone on which I am trying change the install App destination to the SD card.


At this prompt I am running DISM set-install-location 2 in Administrator: Command Prompt resulting in dism not found 127.

Previously I have debugged DISM with restore health but how can I point the Administrator: Command Prompt to where ever DISM is located.

More replies
Relevance 50.02%
Question: dism error 87

every time I get this "DISM.exe / Image: F: \ 7work \ WIM / Add-Package / Package Path: F: \ 7work \ LP \ lp.cab" try to run I get an error situation. error 87?
What should I do now. I have so many looked on google but I'm desperate.
thanks

(google translate)

More replies
Relevance 50.02%
Question: DISM Error 80

I'm trying to capture a windows 8 image from PE. I'm using dism to capture the C drive only. When I run dism, it finishes but I get an error 80. 
---------------------------------
 Error: 80
 The file exists.
 The DISM log file can be found at X:\windows\Logs\DISM\dism.log
 Failed to create image
 ---------------------------------
I've checked my save location and there is no such file.
Upon examining the logs I find that dism thinks there is not enough space, followed by the file already exists. The drive that dism is saving to has over half a terabyte of
free space.

[828] [0x80070070] ReadWriteDataInternal:(141): There is not enough space on the disk.
[828] [0x80070070] ReadWriteDataInternal:(141): There is not enough space on the disk.
[828] [0x80070070] WriteDataCallback:(1140): There is not enough space on the disk.
[828] [0x80070070] ResExtract:(5208): There is not enough space on the disk.
[828] [0x80070050] WimImageEnqueueOperation:(777): The file exists.
[828] [0x80070050] CompressCaptureNode:(3570): The file exists.
[828] [0x80070050] WimImageEnqueueOperation:(777): The file exists.
[828] [0x80070050] ResAddFromFileAndHandle:(4415): The file exists.
[828] [0x80070050] AddFileNodeToImage:(2041): The file exists.
[828] [0x80070050] EnumImageFiles:(1903): The file exists.
[828] [0x80070050] EnumImageFiles:(1921): The file exists.
[828] [0x80070050] EnumImageFiles:(1921): The file exists.
[828] [0x80070050... Read more

Answer:DISM Error 80

Is the OS volume actually the C: drive in WinPE? Usually the C: ends up being the System Reserved partition (or a card reader) unless you had done an unattended install to only create one partition.
What are you trying to capture the image to?

7 more replies
Relevance 50.02%

I have been running MS systems since you needed to 5-1/4' floppies to boot them. I know the difference between 32-bit and 64-bit systems. This one has me a bit frazzled.
When I run Dism.exe, I consistently get the following error:

Deployment Image Servicing and Management tool
Version: 6.3.9600.17031

Error: 11
You cannot service a running 64-bit operating system with a 32-bit version of DISM.
Please use the version of DISM that corresponds to your computer's architecture.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
It's obvious that the command that's loading is the 32-bit version. I scanned the hard drive and found several versions of DISM.exe. Each time I get the same error, regardless of which DISM.exe I execute. Each time I was in an "elevated" cmd environment.
I even tried going into Powershell and running it. Same problem. I have checked the path, just to be sure. sysWOW64 appears before system32 in the path variable.  I have tried running dism.exe from each individual location on the drive, just to make sure
the "local" command is/was being executed. Same error.
The reason for this is that sfc /scannow found some corrupted files it could not repair. I wanted to run the DISM command, then rerun the sfc command.

Where can I find the 64-bit version of dism.exe? It should be on the hard drive somewhere or at least you would think so.

I also tried running Powershell and the Repair-WindowsImage -Online... Read more

Answer:DISM gives Error 11

Hi Bob,
No, there is no way to edit the registry, since registry editor need administrator permission. However, according to your description, you have no administrator account. Like my last post, admin (especially built-in admin) have full permission to take
ownership of folder and change any user account type.
To confirm this, please run this command:

From the output, we would check if it's in Administrator group. Or post the output here let us help you.Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

9 more replies
Relevance 50.02%
Question: DISM error 123

Hello everyone,
I'm preparing some Windows 7 Professional x64 images for faster deployment (including windows update packages). I used the WSUS Offline Update tool to download the Windows Updates for the integration with DISM. After that I created a .iso and tested
the Windows installation in a VM.
Everything looked fine but then I decided to do this process again but using the Windows 7 servicing stack update and Convenience Rollup files instead of hundreds of single files.
I used the same commands but got the folowing error message:
Deployment Image Servicing and Management tool
Version: 10.0.14393.0


Error: 123

Unable to access the image.
Make sure that the image path and the Windows directory for the image exist and you have Read permissions on the folder.

The DISM log file can be found at C:\windows\Logs\DISM\dism.log

The dism.log entry:
2016-12-02 14:53:31, Error                 DISM   DISM.EXE: Failed to access the image folder or image's windows folder.
I tried out many things like changing the directories, taking ownership of the mount folder, disabling UAC, disabling AV but nothing helped.
I'm using Windows 10 Professional 64bit and executed this commands to use DISM:
Dism /Mount-WIM /WimFile:C:\win7\extract\sources\install.wim /Name:"Windows 7 PROFESSIONAL" /MountDir:C:\win7\mount

Dism /Image:/MountDir:C:\win7\mount /Add-Package /PackagePath:C:\win7\updates\Windows6.1-KB3020369-... Read more

More replies
Relevance 49.61%

Hello. After manually installing Threshold 2 AVG PC TuneUp reported errors on my C: disk, so I performed a chkdsk. The system rebooted, naturally, and chkdsk took a very long time, always stuck at the same percentage. CristalDiskInfo reports no error at all times. After the completion of chkdsk, after 9 hours or more, I got an error of mscorwks.dll (0xc0000020).

I assume that either the filesystem or the physical disk are bad. So I try running a SFC, but it stops at 1% saying that it cannot perform the action. I try with DISM and it also stops near the beginning reporting error 1392.

Any ideas on how can I proceed? I don't want to wipe my system

EDIT: I just tried DISM toolkit from this forum, with the image mounting option, and also error 1392, file can't be read.

Here's the log:
dism.log

Answer:SFC stops at 1%, DISM error 1392, dll error

Someone else is having trouble with AVG PC Tune up.
Try and disable it and see if you get that same error come up
They tried to get rid off it but every time they did it came back

1 more replies
Relevance 49.61%

Hello. After manually installing Threshold 2 AVG PC TuneUp reported errors on my C: disk, so I performed a chkdsk. The system rebooted, naturally, and chkdsk took a very long time, always stuck at the same percentage. CristalDiskInfo reports no error at all times. After the completion of chkdsk, after 9 hours or more, I got an error of mscorwks.dll (0xc0000020).

I assume that either the filesystem or the physical disk are bad. So I try running a SFC, but it stops at 1% saying that it cannot perform the action. I try with DISM and it also stops near the beginning reporting error 1392.

Any ideas on how can I proceed? I don't want to wipe my system

EDIT: I just tried DISM toolkit from this forum, with the image mounting option, and also error 1392, file can't be read.

Here's the log:
dism.log

Answer:SFC stops at 1%, DISM error 1392, dll error

Someone else is having trouble with AVG PC Tune up.
Try and disable it and see if you get that same error come up
They tried to get rid off it but every time they did it came back

30 more replies
Relevance 49.2%

Please help!

I've been trying to run dism for a couple of days now and all I'm getting is this:

"DISM failed. No operation was performed.
Error: 0x80240021"

Already tried the Start Component Cleanup then the Restore health but to no avail. I already ran chkdsk but still failed to fix dism. I badly need help cause my windows update wont download any files, and I read running sfc would help (sfc failed) so I turned to dism which also failed. Hoping that if I fix dism, sfc would also run smoothly as well as windows update.

When I tried to view the DISM log file, it seems that the problem is with the PEProvider.dll it says failed to load etc...

I'll attach below my DISM log file.

Hope you could help me! Thanks!

dism.log

Answer:DISM error: 0x80240021

Please please help and don't ignore this message, dear people w great computer skills :'(

20 more replies
Relevance 49.2%

I've discovered a weird issue on Windows 10x64 10525






PS C:\WINDOWS\system32> dism.exe /online /cleanup-image /scanhealth
Deployment Image Servicing and Management tool
Version: 10.0.10525.0
Image Version: 10.0.10525.0
[==========================100.0%==========================]
The component store is repairable.
The operation completed successfully.








PS C:\WINDOWS\system32> Repair-WindowsImage -Online -RestoreHealth
Repair-WindowsImage : The restore operation failed. Either the repair source was not found or the component store
cannot be repaired.
At line:1 char:1
+ Repair-WindowsImage -Online -RestoreHealth
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: ( [Repair-WindowsImage], COMException
+ FullyQualifiedErrorId : Microsoft.Dism.Commands.RepairWindowsImageCommand



Any solution yet?

More replies
Relevance 49.2%

Heya all!

Recently I got problems when running SFC or DISM to repair my system. As far as I know it concerns the shortcuts in the folder Administrative Tools, there I changed under Properties the Run option to Maximised Windows and since then SFC and DISM have shown this error that the services are unable to download the proper source files (they admonish a mismatch I cannot correct).

Any suggestions?
I am running a Windows 8.1 Update 1 system without the Pro version, so I have no access to its exclusive features. I attach the corresponding log files after a run of DISM and SFC for more infos.

Answer:DISM and SFC error, 0x800f0906

Select a system restore point earlier as to when you had the problem. You could also try system recovery, Option 1

System Restore - How to Do in Windows 8

System Recovery Options - Boot to in Windows 8

2 more replies
Relevance 49.2%

I am trying to enable .Net 3.5 in a Windows 8.1 .wim file using DISM.exe.
I have downloaded version 8.1 of the Windows kit.
I am running cmd.exe as an administrator and here is the command I am using to mount the image:
dism /mount-wim /wimfile:"C:\mounted\Windows 8.1 (x86) Capture.wim" /index:2 /mountdir:c:\mount
This command works and then I run the following command to enable the feature:
DISM /Image:c:\mount /ScratchDir:C:\scratch /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:c:\sources\sxs
The scratch directory has the everyone group with full control and the administrator account used to run cmd.exe is the owner of the directory.
Here is the output from the dism.log file:
2013-12-03 08:25:32, Info                  DISM   PID=7808 Scratch directory set to 'C:\Users\ADMIND~1\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2013-12-03 08:25:32, Info                  DISM   PID=7808 Successfully loaded the ImageSession at "C:\WINDOWS\System32\Dism" - CDISMManager::LoadImageSession
2013-12-03 08:25:32, Info                  DISM   DISM Provider Store: PID=7808 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2013-12-03 08:25:32, Info                  DISM   DISM Provider Store: PID=7808 Fail... Read more

Answer:DISM Error C0000135

Finally solved the problem.  It turns out that our GPOs are blocking microsoft update.  Even though I am using the /LimitAccess switch in the command it seems that something is still touching the update site.  
To get around this I created a separate OU and GPO for the Windows 8 workstation I'm using as it describes in the following article http://support.microsoft.com/kb/2734782.
  I then ran the DISM commands to mount the image and enable the settings I needed.  After all of this finished I uploaded the "new" image and redistributed it with SCCM.  Now when a machine is imaged with our Task Sequence using the 8.1 image,
all of the applications that are selected in the UDI wizard are installing.

4 more replies
Relevance 49.2%

Hello, I've had this problem for quite some time but a few weeks ago it disappeared, I was very relived but now it's back and I don't know what to do. (I'm using Windows 8.1 currently waiting for the notification to upgrade to windows 10)

So basically once I log onto my laptop everything seems fine until a little notification pops up saying "Failed to connect to a Windows service" "Windows couldn't connect to the Group Policy Client service".

So I go into my system event log as it says to do, and I see all these errors. Many of the errors are Event ID: 7000 Service control manager.
So these errors concern me as it's slowing down my laptop and I just can't seem to fix it.This Windows couldn't connect to Group Policy Client also makes it so certain browsers such as Chrome take up to an 1 hour for the chrome browser to pop up. Then once inside chrome flash stops working and videos start to buffer.

When it connects to group policy (Few weeks ago) Chrome and everything worked fine.

So I read up on it and tried the /sfc scannow however once finishing it said it found corrupted registry but couldn't fix it.
So I did /Dism /Online /Cleanup-Image /RestoreHealth, however once finished it said "Dism failed. No operation was performed"

So I tried /Dism /Online /Cleanup-Image /StartComponentCleanUp which completed fine, so yet again I went back to trying /Dism /Online /Cleanup-Image /RestoreHealth, but yet again it said "Dism failed. No operat... Read more

More replies
Relevance 49.2%
Question: 10130 - DISM error

Getting this error when running DISM after a clean install:






>Dism /Online /Cleanup-Image /StartComponentCleanup

Deployment Image Servicing and Management tool
Version: 10.0.10130.0
Image Version: 10.0.10130.0
[==========================100.0%==========================]
The operation completed successfully.

>Dism /Online /Cleanup-Image /RestoreHealth

Deployment Image Servicing and Management tool
Version: 10.0.10130.0
Image Version: 10.0.10130.0
[======================= 40.0% ]
Error: 1726

The remote procedure call failed.

The DISM log file can be found at C:\Windows\Logs\DISM\dism.log



Log file is available if anyone wants it. I looked at it but don't understand what it's saying.

Answer:10130 - DISM error

I had that in some earlier builds after upgrades... I fiddled for a while, running multiple sfc's, chkdsk's, etc.. and was finally able to make it work.

10 more replies
Relevance 49.2%

I'm trying to convert install.esd to install.wim from a clean iso/usb windows kit that was created with media creation tool and the version of windows is windows 8.1 pro

dism /export-image /SourceImageFile:install.esd /SourceIndex:1 /DestinationImageFile:install4.wim /Compress:max /CheckIntegritygives Error 11 and the log looks like this2017-03-23 07:28:32, Info DISM PID=3404 TID=1424 Scratch directory set to 'C:\Users\Dan\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2017-03-23 07:28:32, Info DISM PID=3404 TID=1424 DismCore.dll version: 6.3.9600.17031 - CDISMManager::FinalConstruct
2017-03-23 07:28:32, Info DISM PID=3404 TID=1424 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadLocalImageSession
2017-03-23 07:28:32, Info DISM DISM Provider Store: PID=3404 TID=1424 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2017-03-23 07:28:32, Info DISM DISM Provider Store: PID=3404 TID=1424 Failed to get and initialize the PE Provider. Continuing by assuming that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2017-03-23 07:28:32, Info DISM DISM Provider Store: PID=3404 TID=1424 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2017-03-23 07:28:32, Info DISM DISM Provider Store: PID=3404 TID=1424 Getting Provid... Read more

More replies
Relevance 49.2%
Question: DISM Error 1314

When trying to us DISM mount a winpe.wim image (from Windows Automated Installation Kit), I get the following error:
 
Error: 1314

A required privilege is not held by the client.

The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
 
Here is an excerpt from the DISM log file:
 
2010-11-23 15:44:41, Error                 DISM   DISM WIM Provider: PID=2900 Failed to mount the image. - CWimImageInfo::Mount(hr:0x80070522)
2010-11-23 15:44:41, Error                 DISM   DISM WIM Provider: PID=2900 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:999 - CWimManager::InternalOpMount(hr:0x80070522)
2010-11-23 15:44:41, Error                 DISM   DISM WIM Provider: PID=2900 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:2247 - CWimManager::InternalCmdMount(hr:0x80070522)
2010-11-23 15:44:41, Error                 DISM   DISM WIM Provider: PID=2900 Error executing command - CWimManager::InternalExecuteCmd(hr:0x80070522)
2010-11-23 15:44:41, Error              &nb... Read more

Answer:DISM Error 1314

Before opening up the Windows AIK command prompt, right click the prompt icon and choose to RUN AS ADMINISTRATOR. Then re-run your syntax. This should fix your issue.
 
 
P.S. I would normally right click and go to properties and choose to always run as administrator so that I don't come across this issue. 

7 more replies
Relevance 49.2%

Hello
I use the Windows DVD 10 and option 3 with IMAGE_HEALTH and have an error 50:
http://www.eightforums.com/performan...upt-files.html

0x800f081f
and operation not fix !!
What to do ?
thanks for your help
Best regards

Answer:Error DISM restorehealth

you are using the Dism /restorehealth /source option...

You stated you using windows 10 setup media DVD..

Are you running the program on a windows 10 host pc ??

Also the program was tested using the windows 10 setup media created from here > http://www.microsoft.com/en-us/softw...load/techbench

And if you could post a pic of the expanded cmd windows showing the error, would be nice to see..

70 more replies
Relevance 49.2%

Hello
I use the Windows DVD 10 and option 3 with IMAGE_HEALTH and have an error 50:
http://www.eightforums.com/performan...upt-files.html

0x800f081f
and operation not fix !!
What to do ?
thanks for your help
Best regards

Answer:Error DISM restorehealth

you are using the Dism /restorehealth /source option...

You stated you using windows 10 setup media DVD..

Are you running the program on a windows 10 host pc ??

Also the program was tested using the windows 10 setup media created from here > http://www.microsoft.com/en-us/softw...load/techbench

And if you could post a pic of the expanded cmd windows showing the error, would be nice to see..

43 more replies