Computer Support Forum

External HD not Detected: Disk 1, Unknown, Not Initialized

Question: External HD not Detected: Disk 1, Unknown, Not Initialized

I've got 600GB HD (Rock mobile disk) that goes without saying need to be recuperated. It was working fine earlier this summer when I last accessed it. A few weeks ago, I plugged it in again and it gave me an I/O Device Error, read and unspecified error.

I have been researching a solution non stop and today when i plugged it in once again something worst happened, this time I see a External HD not Detected: Disk 1, Unknown, Not Initialized in Disk Management.

Can someone please help?

The irony... we get an external drive to protect our data and not loose it and then this happens

Relevance 100%
Preferred Solution: External HD not Detected: Disk 1, Unknown, Not Initialized

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: External HD not Detected: Disk 1, Unknown, Not Initialized

Try this to salvage what you can from it: Download MiniTool Power Data Recovery Free Edition - MajorGeeks
Do that before any attempts to repair.
If nothing, portable drives are even less reliable than stationary ones and it's interfaces are prone to malfunction.

15 more replies
Relevance 103.73%

I have this 160GB hard drive that I have not been using for a while, yet I am very sure it was working fine the last time I used it.

Today when I plugged it in to my new notebook that is running Windows 8.1 now, it doesn't detect my hard drive. I also tried on other notebook and it has the same issue. So I know the problem is most likely on the hard drive.

Using Command Prompt, it says Disk 1's status is "Online", but size is "0".

Here is the status at Computer Management:
Disk 1
Unknown
Not Initialized

I also tried to Initialize on MBR, but it returned me with "Incorrect function." message.

I tried "Troubleshoot" and the result says:
"USB Mass Storage Device is an older USB device and might not work with USB 3.0
Plug the device into an available USB 2.0 port..."
My notebook has 3 USB ports where according to the manual, 2 of them are backward compatible to 2.0... I tested on each, but it is still not working.

What should I do? Although I have not been using it for a while, I wish to check the content first before formatting it. I might have some forgotten, yet important files within.

Thanks in advance. Hope I can be assisted here.

Answer:HDD not Detected: Disk 1, Unknown, Not Initialized, Online

If the controller in the enclosure failed removing the drive and slaving it into a desktop PC may let you recover your files. If the drive failed there isn't much you can do.

52 more replies
Relevance 101.27%

Hi i would like to ask why this happen. My external hard disk is detected by computer but doesn't appear in hard disk panel , it only appears on Devices. When i go to computer management. This is the output. Same when i use it to other computers. please help. im just new here and no good at computers.

External HDD : Western Digital My Passport 0740 (500Gb)

Answer:Disk 1 unknown not initialized - an external HDD

  
Quote: Originally Posted by empog


Hi i would like to ask why this happen. My external hard disk is detected by computer but doesn't appear in hard disk panel , it only appears on Devices. When i go to computer management. This is the output. Same when i use it to other computers. please help. im just new here and no good at computers.

External HDD : Western Digital My Passport 0740 (500Gb)




Hi empog,

Welcome to Seven forums.

It could be an either an issue with the harddrive itself or it is formatted in a partition which is not recognized by windows.

Once the harddrive is connected open command prompt and type diskpart and hit enter. Then type list disk and hit enter.

Whatever information is displayed kindly post a screenshot for the same.

Screenshots and Files - Upload and Post in Seven Forums

Keep us posted with the results so we can advise you further.

9 more replies
Relevance 101.27%

Hi,

I've been recovering data from three older internal hard drives for a friend, by way of an external HDD enclosure connected via USB to my laptop. It went well for the first two HDDs but the third, well ....

It's a Maxtor DiamondMax 10 HDD, 120 GB and is also marked SATA150.

(1) On most occasions, the HDD in question does not appear under My Computer. Under Devices and Printers, I see the external HDD enclosure as "USB to ATA/ATAPI bridge" (but not the HDD). In Disk Management, I see my internal drives and CD/DVD ROM but for the HDD in question, only "Disk 2, Unknown, Not Initialised" - I get the option to initialise it as MBR or GPT (I cancel at that point).

(2) On rare and seemingly random occasions, my laptop does pick up the HDD as drive F: but usually asks me if I want to format it (nope!). At this point it also appears under Devices and Printers, My Computer and in Disk Management as 'RAW' and 'healthy'.

(3) On three occasions, I have seen the drive name; on two occasions, all of the files - and on one occasion, I was able to copy four files across to my laptop (before losing visibility of it). So I know all the files are there.

However the HDD disconnects itself (or is disconnected) quite quickly, such that I am back to position (1) for the vast majority of the time.

I have tried TestDisk and EaseUS Data Recovery Wizard, which do not see the HDD. I have also tried MiniTool Partition Wizard, which mostly does not see the HDD but on one occa... Read more

More replies
Relevance 101.27%

Hi, i'm new on this forum. I was searching for an answer to this issue in a lot of threads but i didn't find something to fix it.

I built an external hd using the hard disk of my old laptop (Fujitsu MHV2120AH PL) and a Woxter i-Case 240.

When i connected it via USB i went to the Disk Manager and saw the unit as "Disk 1 Unknown Not Initialized". But there was something else, the disk has a size of 120GB but the Disk Manager shows only 700MB.

The Disk Manager didn't allowed me to format this partition and when I press on "Initialize disk" it didn't do anything.

I used a Linux Live CD and I had the same issue, i tried to create a new partition table but it didn't create it and GParted didn't allow me to create a new partition answering that i need a partition table first.

I tried with Diskpart without any result too.

This HD had an Windows XP installed on the old laptop and before dissamble it i made a quick format with the Bootable CD of my laptop. The quick format was interrupted when the program was copying the files necesary to install Windows XP.

Do you have any idea?

Answer:Unknown - Not Initialized Disk (External HD)

Hello Matterito!

You could try a couple of things: changing the enclosure, as this one's controller may be corrupt, or hooking up the disk directly to the computer.
Also, see if your USB drivers need updating.








  
Quote: Originally Posted by Matterito


This HD had an Windows XP installed on the old laptop and before dissamble it i made a quick format with the Bootable CD of my laptop. The quick format was interrupted when the program was copying the files necesary to install Windows XP.


Following this, it may be that your disk is just damaged. It could be just that the partition table is corrupted, so may be writing full zeros to the disk and repartitioning and reformatting it would help fix the issue. That is in the case that you don't need the information on the drive.

CK_WD

3 more replies
Relevance 100.04%

Hello,

I have run into a problem that has been causing me quite a bit of headache as of late. A week ago, my WD Elements External Hard Disk is not displaying under hard disk drives, but does display under Devices and Printers. This is what it shows under computer management:

I have tried to initialize the disk using MBR and GPT options but failed receiving I/O Disk Error.

Please help, thank you.

More replies
Relevance 100.04%

I am using windows 8 and I have read previous threads with similar issues that I face but my problem is unique. My 60GB external Hard disk was manufactured by FUJITSU and was taken out of a dell laptop. When I bought a case for it yesterday it was tested in a laptop computer to see if it was working before I paid for the case and it was working properly. However, the owner of the laptop removed the cable without safely ejecting the drive first. Later, I connected it to several computer and it would install and be detected in Device manager, Disk Management and even devices and printers but it does not show in My Computer nor does autoplay options pop up. In disk management it is shown as Disk 1 unknown not initialized as shown in the attached screenshot.

I notice that whenever i open disk management, it prompts me to initialize the disk but when i chose gpt and click ok, this window pops up

when I right click the Disk 1 the initialize option is gray and only offline, properties, and help are available. I used mini partition tool and this is what i get

I am at my wits end. Please assist. I do not need what is inside the hdd. I just want it to work.

Answer:External Hard disk not initialized, unknown.

"I notice that whenever i open disk management, it prompts me to initialize the disk but when i chose gpt and click ok, this window pops up"

Did you try initialising it as an MBR disk?

5 more replies
Relevance 99.22%

Guys please help me to fix my hard disk WD elements 1TB

I have tried so many ways to fix it.. but I got nothing in 4 days!!

I have tried from command prompt " chkdsk /f /r "
the first time I tried it works, but something error occured, and now I can't using that method..
when I tried to using that, just show " cann't open volume for direct access"

my hard disk didn't appear on my computer list, but I can reject it.

and anyway I have tried to using minitool partition wizard, but you all can see that my hdd didn't appear with the volume.. just show up disk 2 with 0.00 GB

Anyone can help me to solving this problem ?

btw, My english isn't good enough..but I hope all of you can understand what I mean

Thanks before.!

Answer:External hard drive disk unknown n not initialized!

Sorry to say your WD Elements is dead and you have tried everything.There is nothing left for me to do, honestly. I would have done the same thing before declaring it dead.. No DIY data recovery is possible. The only option open to you is to entrust it to Western Digital Data Recovery partners in your region. Check with them whether there is any hope of recovering data in good shape.Telephonic consultation is free.

https://support.wdc.com/Warranty/dat...y.aspx?lang=en

7 more replies
Relevance 99.22%

1. Disk management showing disk 1 -unknown- -not initialized-

2. When i tried to initialized it show -incorrect function-

3. I tried the recovery software but all of them cant detect my external HDD

4. The Data Lifeguard Diagnostic from western digital managed to detect my external and showing there is bad sector but when i tried to repair, it give me this message -unable to repair bad sector-

Please help!!! is there any chance i can fix this?

Answer:Please help,disk 1 unknown not initialized (western digital external)

I guess there is mechanical problem with the hard drive. you can try checking and repairing bad sectors (http://www.articlesbase.com/hardware...s-6907958.html), or just send it to some drive repair center.
but, if there is important files on the drive, you'll have to recover data before repairing it.

2 more replies
Relevance 97.99%

Hello. Through the power of google, I have come here to see If I can get any help recovering data. Essentially found this thread: disk 1 is unknown, not initialized, unallocated and just having really similar issues.

Issue is with my sisters External Hard drive, a WD My Passport Elite 070B.
Asked her a few questions on how she was using the drive/any issues and she explained that she had to pull the usb plug while still reading/writing because it would hang/freeze (/facepalm)

Downloaded PW Minitool Recovery and EasyRecovery Pro Trial, but haven't really run any lengthy tests yet. Just tried them out for 10 mins to see if anything would show up. Going to leave the computer on tonight and do a full scan though.

Some other things I have tried:
-Tried connecting it to other PC's/Laptops(XP/Vista/Windows 7/OSX). Same thing.
-Tried different USB cables

Any suggestions or things I should try?

Answer:Unaccessible External Hard Drive: Disk 1 Unknown, Not Initialized

I'm facing the same problem too....
Un-detection of my ext BUFFALO MiniStation HD-PCTU3 3.0

9 more replies
Relevance 97.99%

Hi,

I'm new to this forum.

My external hard disk (Seagate) is detected in the task bar after connecting, but not visible in "My Computer".

It is visible in Device manager under Disk Drives but not under USB.

There are few threads in this forum which are similar to mine, except that their Drives are visible in the Disk Management as Unallocated Space, mine is not.

SEE ATTACHMENTS !!!!!!!!!

I've tried all tools, tried in Windows XP still no solution.

Is there any way to atleast recover the data !!!!!!!!!

Your reply is appreciated !!!!!!!!

SEE ATTACHMENTS !!!!!!!!!

Answer:External Hard Disk, Unknown, Not Initialized ! No Unallocated Space.

Hi Pradeep,

Welcome onboard.

" I have tried all tools" - can you please enumerate what all tools?

Have you tried running the Seagate SeaTools for Windows to diagnose/repair.

If not check your external drive now.

5 more replies
Relevance 96.76%

This quick new hard disk. So sad I cant access it anymore? why this happen?

You can see from the photo MY computer cant even see this driver anymore, so I check on the
- Disk management it said unknown no driver letter too ,Not initialized.
-Click Initialized it said i/o device error

I have try uninstall the device and restart let it install again still the same.
Checking many thread have the same problem, I wonder anyone solve this kind of problem before?
--------------
Update the possible cause of it, I believe my external hard disk spoil because my laptop was low battery and suddenly off either it goes Hibernate or off there is no time to read or write in the hard disk.
Then I just unplug the external hard disk.

If you face this situation don't unplug it, turn on the computer back and do a proper remove or shut down everything.

Answer:1TWD external hard disk unknown,not initialized,unallocated,i/o error

Is this an external drive attached via a USB hub ??

9 more replies
Relevance 83.23%

Hello there. This is my first post at this forum.

I have a probably 6-7 years old WD Elements 1TB external HDD. When I connect it to PC via USB I can hear ordinary HDD detected sound and after that it sounds some short beeps at 7-3-3 order. Here are some screenshots of my situation. Is there any way to recover my data stored in this HDD? My priority is saving my data but saving HDD would also be cool

Help me SevenForums-Wan Kenobi you're my only hope.

OS: Win7 Ultimate x64

Answer:External HDD is Unknown and Not Initialized

Jumunji is one of the best recovery techs around! However, I can ask this: Did the computer use the Smartware and DriveUnlock when operations were aok? If so, my best guess is: get the Smartware and DriveUnlock back to the aok-days' operations.

3 more replies
Relevance 82.41%

Hey guys,

I have this new Western Digital My Book that I got about 6 months ago and it suddenly will not show up when I plug it in. I tried looking for solutions on what's happening but I can't get past the first few steps, until I found one where it says that the drive is probably toasted! Anyway, I'm still not giving up hope. I tried it on two computers, I tried uninstalling and reinstalling the driver but it's still the same. I tried initializing it and it's giving me "The request could not be performed because of an I/O device error". I would like to chkdsk it but I forgot what the drive letter of the hard drive, so I can't really search it.

Here're some screenshots.


Also didthis :

Thanks for your time!

More replies
Relevance 82.41%

Hello to All,
I have a 500 GB external USB drive that I can't access on my wife's Windows 8.1 laptop. I have confirmed that is in good operating condition on my XP PC where I can access all my files but in Computer Management on the Windows 8.1 laptop it displays as Disk 1 with a red arrow pointing down and it says Unknown and Not Initialized. Can someone help?
Thanks
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz, Intel64 Family 6 Model 69 Stepping 1
Processor Count: 4
RAM: 7908 Mb
Graphics Card: Intel(R) HD Graphics Family, -1984 Mb
Hard Drives: C: Total - 940362 MB, Free - 902392 MB;
Motherboard: Dell Inc., Inspiron 5537
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
 

Answer:External USB Drive Unknown and Not Initialized

With the USB drive plugged in, go to Control Panel > Device Manager. Then see if there are any yellow exclamation marks. Try right click, update driver.
 

3 more replies
Relevance 82.41%

Please help me to get my important data from my bad hard disk,

I have a segate 500 GB usb external HDD, It was working fine since last 3 years. yesterday i connect this to a XP machine, and start coping some data. the coping speed was very slow, so I restarted the machine in between. After that I LOST MY hdd, it never be back. I tried a lot.. no success till now.
Please help me get my data back:

Answer:How do i fix unknown, not initialized and unallocated external hd?

Sorry to be the bearer of bad news ... but I had almost exactly the same thing happen to me on a Seagate 2TB hard drive. Working for months, even passing surface checks with no errors and then, one day -- "bad disk".

I've tried every data recovery app I could find against it (4 of them) and none of them find anything.

I've had drives fail me over the years and have never run into this situation where the drive powers up but NOTHING can be recovered from it.

So, I've resorted to sending it off to a local data recovery outfit

9 more replies
Relevance 82.41%

Please help me fix this problem. any information you need just ask me i will tell you all you need.

Thanks in advance

Answer:How do i fix unknown, not initialized and unallocated external hd?

Right click on it and choose Create Parittion. Choose the type of partition. Then format it. I recommend doing the slow format. It may take an hour or so, but I think you're better off in the long run.

9 more replies
Relevance 82%

Hi, My DVD Recorder died, so I took out the HDD Seagate DB35.2 and plugged it in my laptop. I get the above message in disk management. I also tried Knoppix 7.0 but the disk does not show up. My scope is to save the content in the disk and move it to my PC, is it a mission impossible? Any suggestion is very welcome. Thanks Alex

Answer:Disk 1 Unknown, Not Initialized

I'm not sure you will have much luck if the disk is not readable. You can usually use a Linux distro to try to read it, but you've tried that. If it can be read you can also try Copy & Paste - in Windows Recovery Console. Other than that you could try Recuva and see if that will work. But, if the disk can't be read, I'm afraid there is nothing you can do if those 3 options don't help.

9 more replies
Relevance 82%

Hi, thanks for reading this and thanks for your help.

My laptop took a fall and after that it doesnt enter the boot sequence for windows, stops at the laptop manufacturer logo.

I remove my hdd from the laptop and put into a external drive i keep for this purpose, checking hdd?s.

I can?t find the drive in my computer but I can see it in disk managment. It says Disk unknown - not initialized.

I?ve tried using PW but i cant see the drive on there. I would really like to keep my files I have on that drive but it seems to me that it toast.

Regards...

Answer:Disk unknown - not initialized

Quote:
My laptop took a fall and after that it doesnt enter the boot sequence for windows, stops at the laptop manufacturer logo.


That is bad news mate. Usually a mechanical HDD won't survive physical shock like dropping etc. This is because of the microscopical gap between the head and platter. Heads flying height on modern HDDs is about 5-10 nano-meters. For example: an average human's hair is about 25000 nano-meters in diameter. A drop will most likely cause the head to stuck on platter or cause scratches on platter surface.
I would suggest diagnosing the HDD using "Seagate Seatool" and verifying it's health.

SeaTools for Windows | Seagate
Run the tool and select your external HDD for testing. Then choose "Basic Tests --> Shot Generic" and wait for it to finish.

If the test is a pass, run "Basic Tests --> Long Generic". If either of the test fails, the case will be beyond DIY and you should consult a data recovery pro for recovery.

1 more replies
Relevance 81.59%

It is my brother's hard drive & it has very important data related to his working. It is a 2tb WD my passport ultra external hard disk which was used as NTFS with only one partition.
My brother told me that he deleted some data from the drive by mistake and was recovering the data from the drive but all the windows recovery programs he used just hanged after few minutes (which is also a sign of bad sectors). Then he done the blundered mistake by formatting the drive, the formatting also not completed due to hang situation.

Now the current situation is that the drive is not showing in the windows explorer and when I open the disk management ,the popup came up for initializing the disk either as MBR or GPT. When I try to initialize the disk, it gives me this error:- "The request failed due to a fatal device hardware error". I have attached a few screenshots below.

I have tried cloning the drive with clonezilla, tried booting the drive with parted magic, Hire n boot and system rescue CD but neither of them recognized the drive and some also rejected to boot with the drive attached.
Now currently i am scanning this disc for recovering the lost partition in the 'Partition Recovery Wizard' software according to the advice on some old thread here, but this software has detected my disk as 'bad Disk' in the file System column as you can see in the fifth image, so i don't have much hope with this software.

Please tell me if there is any hope left for drive like try... Read more

Answer:wd 2tb external drive - unknown, not initialized and unallocated

Hello nsingla and I am sorry you and your brother have this problem!

Things don't look so good now. You've done and tried a lot with aim you need, still looks like the drive's partition table and/or file system are corrupted to a stage that prevents other software to work correctly onto the drive.

I could additionally suggest trying to scan and repair the drive. Try downloading the WD ultra Drive Utilities for Windows and see if you could repair the drive:

Support Answers

If nothing works, the drive is probably too damaged and beyond repair. Hope this is not the case. But perhaps the worst part for the drive was the formatting attempt. Which, by definition, would delete everything from the HDD.

Good luck and post back with results!

CK_WD

4 more replies
Relevance 81.59%

I have a 1TB external my passport USB hard disk.It was working fine till last week but when i plugged it in today windows 7 didn't recognize it.I can see the hard disk in Disk management as "Disk1 Unknown Not initialized" but can't see it under my computer.Also the hard disk light is blinking continuously .When i plug it in USB port it tries to read data and the there is a clicking sound.It clicks few times and then it goes completely silent.
I have tried using various partition tools like MiniPartation and TestDisc etc but they don't even recognize the hard disk

Any help is much appreciated. My priority is recovering data I can buy a new hdd if i can recover data.
Please let me know if u need more info.I am posting a screenshot of disk manager for reference.

Thanks!!!!

Answer:Disk1 Unknown Not Initialized error for external HDD

My Passport is Western Digital. Isn't it?

I am not placing much hopes on your drive. It doesn't even show the capacity.

Anyway let us check your drive with Datalifeguard Diagnostics for DOS.

Please see this post and execute. Please help,disk 1 unknown not initialized (western digital external)

9 more replies
Relevance 81.59%

My external HDD has crashed after unplugging it accidentally while using it. I believe the directory structure has been corrupted. The external HDD shows Unknown, no size, and Not Initialized on the Disk Management screen:

I have tried using MiniTool Partition Wizard as described in this thread.

I'm not sure where to go now to try to recover the data on this HDD.

Thanks for your help in advance.

Answer:External HDD shows Unknown, no size, Not Initialized

Try the Data Recovery tool of Partition Wizard.

4 more replies
Relevance 81.59%

hello there ,
i have a Toshiba hard drive 500 GB it was working fine but suddenly when i plugged into my laptop i discovered it is not working and when i go to disk management it said Disk 2 unknown and not initialized.
i tried to plug it in another computers but nothing changed.
i have many thing in that drive i need them so could you please help me ?
 

Answer:my external hard drive is unknown and not initialized

I assume you have tried another usb cable; that is the very first thing to do.
If you have already done the above, then the next thing I would do would be to pull the drive out of the enclosure and connect it as an internal drive. Note you must have a working desktop to accomplish this task. If that does not work, you can send the drive to a data recovery shop. This last step is NOT cheap so get an estimate. A simple recovery using software can run $250 or so plus the cost of whatever media you want the data copied to AND it goes way up from there.
i have many thing in that drive i need them so could you please help me ?Click to expand...

Data you do not backup is data you do not care about AND you should expect to lose said data. All drives fail; it is only a question of when your drive will fail.
 

2 more replies
Relevance 81.18%

Disk 1 is unknown, not initialized, unallocated, Please help
disk 1 is unknown, not initialized, unallocated.. plizz help
I already use PhotoRec recovery but "disk capacity not correctly detected"
Disk 1 = seagate 500Gb hdd

Answer:Disk 1 is unknown, not initialized, unallocated, Please help

Start with this free tool. You should try to recover the partition before worrying about recovering the data. If you can recover the partition, the files should be OK if they haven't been over-written.

Best Free Partition Manager Freeware and free partition magic for Windows 7, Windows 8, Windows Vista and Windows XP 32 bit & 64 bit. MiniTool Free Partition Manager Software Home Edition.

Select Partition Recovery Wizard. Choose the drive, then full disk, quick scan. Quick Scan may take 5 or more hours.

If the partition is eventually found, select and double click on it. You should then see all files in the Explorer.

9 more replies
Relevance 81.18%

Hi

I have the same problem. when i plug in the drive, it says that its succesfully installed however it does not appear in "my computer". also when i go into system tools it says that disk 1 is unknown, not initialized, unallocated

can you please help me, i dont want to lose my data, it contain all my pics. please help

Answer:disk 1 is unknown, not initialized, unallocated

Hello Jenny, and welcome to Seven Forums.

What type of drive is it, and how is it being connected?

Please go ahead and post a screenshot showing the full layout of your Disk Management window to see if that may help ID what the issue could be.

Disk Management - Post a Screen Capture Image

9 more replies
Relevance 81.18%

This 2.5" SATA drive is from a Toshiba that seems to have died this morning. There's no boot, no BIOS, nada.
I removed the drive and attached it via USB to my Win7 box where it shows as "Unknown, Not initialized, and offline." There are no rt-click options in disk management. I can hear the drive spinning, but it shuts down on its own occasionally, and sometimes won't power up at all without a bit of fiddiling.
I can't get any response at all from my Linux box, and neither Test Disk nor Recuva finds it at all.
Is there anything else to do, or is this drive dead, as I suspect it is?
 

Answer:Disk unknown, offline, not initialized.

If it's not being recognized properly, there isn't anything else that you can do.
 

1 more replies
Relevance 80.77%

Hi Jumanji,

My external HDD (WD) is not getting recognized in my laptop from last few weeks. I have followed different threads but didn't get any working solution.

I have tried below options:

1. Disk management : Initially showing MBR/GPT options but none worked. After that its showing my external HDD as 'Disk1 unknwon not initialized'.

2. MiniTools Partition Wizard : Installed MiniTools Partition Wizard v9 in my laptop however my external HDD is not showing in the tool as Disk2.

Could you please help me to get the issue resolved or recover the data at least.


Many thanks !!

Answer:External hard drive is showing 'Unknown Not Initialized'

Welcome onboard.

External HDD - Western Digital Model No/Name: ? Capacity : ?

Please post a screen shot of Windows Disk Management with only the faulty external connected. Disk Management - Post a Screen Capture Image

2 more replies
Relevance 80.77%

Hello
I got my 1tB WD external disk and it's not working as it used to. The problem came from nowhere, suddenly, totally unexpected. There is/was my precious data on it which I collected for 10+ years and I'd like not to lose it.

Origin:
It was working fine a day ago, no problems occured. Hasn't been unplugged since then. Has never fallen. Has never had any kind of error. But: I've seen some kind of ".COM not responding" problem on my PC (don't remember, closed it immediately). I believe my laptop is in a good and healthy condition.

So, what my WD HDD does is:
- it can be seen as a device by my computer. I can plug it out safely.
- diode shows that it's working (not showing the data transfer activity)
- nothing else

What I see in Device Management/Storage is (as in the title):
Screenshot by Lightshot

What programs I used to try to restore partition:
- Mini tool Partition Recovery Home Edition (quick and deep scan, no results. Shows disk as a Bad Disk)
http://prntscr.com/2wpy8s
- Mini tool Power Data Recovery (pro, non-free tool, however after scan there was no results)
- Find and Mount (no results)
- TestDisk (quick and deep scan, no results)

What I haven't tried doing is connecting the HDD directly to the laptop.

Any suggestions?

Answer:External HDD shows as Unknown, Not initialized, Unallocated. Restore?

You should try directly conmcting it. If that does not work, try this: Recover a flash drive turned RAW ? Partition Wizard and TestDisk. Do recovery with partition wizard. (Don't mind the name) But if that does not work, your drive is dead. Like a wise man said, backup, backup, backup!

4 more replies
Relevance 80.77%

I had a WD 2TB external drive which I transferred successfully to a USB 3.0 enclosure months ago. Then I moved and the drive has been packed away in the trunk of my car since.

I just got it out as I need some files on it, and when I hooked it up it didn't work: the computer recognized it as a CD drive or something... in Computer it would not show up or show up as just a drive letter ... in disk management it said No Media. I tried it on another PC too to no avail.

After much research, the most likely solution looked to be to get a new enclosure. So I did, but the drive still isn't working, but in a different way.

When I first hooked it up, all looked well: the system tray showed correct recognition of the drive and enclosure type/brand and installed the drivers successfully.

But the drive no longer shows up in Computer at all, and in disk management it now prompts me to initialize the disk, and has it marked as Unknown, Not Initialized.

I have spent all day trying to fix this problem, and have read a million threads on different sites and tried everything, to no consequence. I need the files on the drive, and have tried all of the following:

- booting in ubuntu and knoppix via cd - drive is not recognized

- every major app for this type of problem i saw recommended: seagate seatools, partition wizard, wd data lifeguard diagnostics, power data recovery, find and mount, a bunch of stuff on hiren's boot cd, test disk, etc.

In most cases, the drive was not recognized at a... Read more

Answer:External Hard Drive HELL (Unknown, Not Initialized)

Do NOT initialize it. With a usb stick or dvd Puppy Linux boot firmly in place ready to boot, can you reconnect the WD 2TB drive back to the computer like it was in the old days? Boot Puppy Linux, copy all the data folders and files onto another reliable external media. If that does not work, you might be heading for a local business-oriented computer fix-it place. However, let's see what others here might want to add.

9 more replies
Relevance 80.77%

I had a WD 2TB external drive which I transferred successfully to a USB 3.0 enclosure months ago. Then I moved and the drive has been packed away in the trunk of my car since.

I just got it out as I need some files on it, and when I hooked it up it didn't work: the computer recognized it as a CD drive or something... in Computer it would not show up or show up as just a drive letter ... in disk management it said No Media. I tried it on another PC too to no avail.

After much research, the most likely solution looked to be to get a new enclosure. So I did, but the drive still isn't working, but in a different way.

When I first hooked it up, all looked well: the system tray showed correct recognition of the drive and enclosure type/brand and installed the drivers successfully.

But the drive no longer shows up in Computer at all, and in disk management it now prompts me to initialize the disk, and has it marked as Unknown, Not Initialized.

I have spent all day trying to fix this problem, and have read a million threads on different sites and tried everything, to no consequence. I need the files on the drive, and have tried all of the following:

- booting in ubuntu and knoppix via cd - drive is not recognized

- every major app for this type of problem i saw recommended: seagate seatools, partition wizard, wd data lifeguard diagnostics, power data recovery, find and mount, a bunch of stuff on hiren's boot cd, test disk, etc.

In most cases, the drive was not recognized at a... Read more

Answer:External Hard Drive HELL (Unknown, Not Initialized)

Do NOT initialize it. With a usb stick or dvd Puppy Linux boot firmly in place ready to boot, can you reconnect the WD 2TB drive back to the computer like it was in the old days? Boot Puppy Linux, copy all the data folders and files onto another reliable external media. If that does not work, you might be heading for a local business-oriented computer fix-it place. However, let's see what others here might want to add.

9 more replies
Relevance 80.36%

I have a Samsung external hard disk drive.
It doesn't detect on Explorer.

System Specifications

OS: Windows 10 - 64 bit
Notebook Model Dell - Inspiron 14 - 5000 series (i7 processor intel)
External HD - Samsung M3 Portable

DISK MANAGEMENT

Sometimes it appears on diskmgmt.msc, but sometimes does not.
Right now it's appearing as "Disk 1 - Unknown - Not Initialised"


DEVICE MANAGEMENT

I can see my hard disk under "Disk Drives" as "Samsung M3 Portable USB Device".
DEVICES AND PRINTERS

My external hd appears in "Devices and Printers" under "Devices".
But cannot be accessed.


MINITOOL - PARTITION RECOVERY

It finds the HDD, but "Partition Recovery Wizard" is not able to recover it.

ALREADY TRIED
Using another cable;
Connecting it in another computer;
Restarted computer several times;
MiniTool - Partition Wizard Free;

Answer:Disk 1 Unknown, Not Initialized - Samsung M3 Portable

Hi rafaelvidal,

Welcome to SevenForums,

1. Complete details of your Samsung M3. Model no: ?? Capacity ??
2. Screenshots: Screenshots and Files - Upload and Post in Seven Forums
3. No overlapping screenshots. In the Partition Wizard screenshot I can't see what is behind except that it is an MBR drive.

Please redo your post for the folks here to understand and help you. If you are not in the Americas please change the timezone (UserCP) so that we get to know whether you are sleeping or awake.

1 more replies
Relevance 80.36%

I ran BIOS diagnostics on a Dell OptiPlex 3010 yesterday and received an error code (2000-0142) - short self test unsuccessful. I pulled the drive and swapped a new SATA drive to get the user back up and running quickly. I'm trying to connect the drive with the error to my laptop using a StarTech USB 2.0 to IDE SATA Adapter. When I open Disk Management I see Disk 0 (my laptop drive) and Disk 1 (the connected drive). It says Unknown / Not Initialized. When I right click and try to initialize it says "The device is not ready." I've tried the more actions > refresh / rescan. Now when I right click the option to Initialize Disk is grayed out and I can only see Offline and Properties.

I browsed through a thread from about 2 years ago and couldn't find a helpful solution.

The drive: Western Digital 250GB SATA / 16MB Cache - WD2500AAKX

Answer:Disk Management - Unknown / Not Initialized Drive

Have you attempted to run Western Digital's Data Lifeguard diagnostic software? It has a short test and an extended test.

Are you trying to recover anything from this drive? Or just trying to find out if it's broken?

9 more replies
Relevance 80.36%

Hello,

I have used the tittle from another thread as my issue is very similar, only none of what is posted there worked for me.

So I have a WD 500gb HDD. (Actually I am not 100% sure it is a HDD and not a SDD)
I have plugged it in various PC and laptops. When doing so, you get the usual sound que. It also installs the driver according to the little pop up window.
However after that, the drive is not visible in "My Computer".

When I check the drive in Computer Management>Disk Management, it wants me to initialise the disk. Which, I know I do not want to do (thanks to one of your earlier posts) as this will over write my data.
In Disk Management the disk is "Unknown" and "Not Initialised" It also does not give any volume. Pics of both of these attached.

I have tried using Partition Wisord free. It does not even see the drive.
I have tried using Photorec. It does not see the drive.
I have used R-Studio. It does see the disk, but I am not able to scan it. Again also no disk volume. Again Picture attached.

I am hopeful for a solution, as I feel like the symptoms suggest that I do not have a head misalignment. But I might be wrong on that.

Hoping for someone with some mad skills to help me out here.

Thanks in advance!
Variable

More replies
Relevance 80.36%

I am trying to recover data from laptop internal HDD use as an external hard drive to recover data from that HDD. I can't see my HDD in my computer but in DISK Managemnet, there is a message, "Disk 1 Unknown Not Initizalized"

Please Help!!

Thanks,

Answer:Recover Data from Disk that is unknown and not initialized

If the data is critical, and it sounds like it is.. the first thing I would do is use a software that makes a sector by sector backup or image of that uninitialized drive. That way if trying to make it readable by initializing it should hose it, you have a copy.

After that, if you know that the unititialized drive was at one time formatted NTFS then you might try initializing it with Partition Wizard freeware

But it may be worthwhile to talk to someone well versed in disk recovery. There may even be some dedicated forums around for that specialty.

If you get lucky and the Partition Wizard initialization shortcut works, then the files should be there after doing a non-destructive format as NTFS file system.

Assuming that's what it was to begin with.

3 more replies
Relevance 80.36%

Hi, I just got a new Y570 Laptop with a 64 gb ssd. In the disk management window, there are two hard drives listed. There is a disk 0, which has four partitions on it, and a disk 1 which is unknown and initialized. Disk 0 is the HDD that comes with the computer. When I try to initialize Disk 1, I get a message saying The disk cannot find the sector requested. What does this mean? Also, is disk 1 the ssd that I'm supposed to have? Another problem:On my hdd, I have an empty partition that says Healthy (OEM partition). It has no file system or letter assigned to it. It is 14.75 gb, and according to disk management, all 14.75 gb are free. What is it, and can I delete it without affecting anything else on my computer?

Answer:Y570 Unknown Disk 1 Not initialized/OEM Partition

hi galaxion2,first of all, do not delete the 14.75 gb partition. it's hidden/system partition that your computer will need to use it during one key recover process.secondly, as you noticed, disk1 is ssd.

1 more replies
Relevance 80.36%

I am experiencing the same issue as with jenny123 but with an additional problem. I am troubleshooting a Seagate FreeAgent GoFlex 1TB external hard drive for my buddy. It is previously working but one day, it is not detected anymore by any device. It is found in the Disk Management however, it is listed as Unknown, Not Initialized, and not showing the partition as shown in the screenshot.


When I try to change it from Offline to Online, I am encountering the error:
"Virtual Disk Manager: The system cannot find the file specified"

I also used the DISKPART in cmd but it is not showing Disk 1 as shown below.


The external hard drive is found in disk drives but it is not showing it's model name.


I tried all the recommended software (partition wizard, testdisk, icare) but still no luck. I also tried searching online for an answer but there's no closure to their issues as well. Hope someone can help on this as he need a) the drive and b) recover the files in the external drive. Thanks!

EDIT: The drive can be seen in the Devices and Printers as shown below.

Answer:Disk unknown, not initialized, and not showing partition

Hi

For any serious troubleshooting, diagnostics or recovery attempt, you should always connect an HDD to a direct SATA port. Usually you can easily remove the header of any Seagate Golex drive and then connect it to an internal SATA port.

Let us know what "Disk Management" reports when you connect the drive directly.

4 more replies
Relevance 79.95%

Yesterday, I was working with my PC while my 1TB Seagate external hard (Amazon.com: Seagate FreeAgent GoFlex 1 TB USB 3.0 Ultra-Portable External Hard Drive in Black STAA1000101: Electronics) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:



After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.


I searched and read lots of threads and tested some other stuff:





(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.

Answer:FreeAgent External Hard stopped working (unknown, not initialized)

Here are the screen-shots and images again:

6 more replies
Relevance 79.95%

Hi everybody

Yesterday, I was working with my PC while my 1TB Seagate external hard (Amazon.com: Seagate FreeAgent GoFlex 1 TB USB 3.0 Ultra-Portable External Hard Drive in Black STAA1000101: Electronics) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:



After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.


I searched and read lots of threads and tested some other stuff:





(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.

More replies
Relevance 79.95%

Hey,

Yesterday, I was working with my PC while my 1TB Seagate external hard (http://www.amazon.com/Seagate-FreeAgent-Ultra-Portable-External-STAA1000101/dp/B0045JLPMO) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:




After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.


I searched and read lots of threads and tested some other stuff:





(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.
 

Answer:FreeAgent 1TB External Hard stopped working (unknown, not initialized)

Hi there Sedhadi,

If your HDD is failing the manufacturer's tests it is probably dead. IF you need to get your data back look for a reputable data recovery company in the area.
Hope that helps.
 

1 more replies
Relevance 79.95%

Hey

Yesterday, I was working with my PC while my 1TB Seagate external hard (http://www.amazon.com/Seagate-FreeAgent-Ultra-Portable-External-STAA1000101/dp/B0045JLPMO) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:

After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.
I searched and read lots of threads and tested some other stuff:

(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.
 

Answer:FreeAgent 1TB External Hard stopped working (unknown, not initialized)

7 more replies
Relevance 79.13%

Guys i have a similar problem but unlike the problem above my partition magic software does not read my external HD.. The device manager shows the HD is working properly.. and the disk manager shows DISK1 unknown and not initialized.. i m giving screen shot for both of them.. My external HD is WD 1TB HD.. it does not matter if i lose the data..but i want the HD to work[ATTACH][/ATTACH]

Answer:disk manager shows DISK1 unknown and not initialized

I had a Seagate drive fail suddenly last week -- a lot like the situation you described, and neither the Seagate nor the WD drive diagnostics even see the drive when it's in an external drive caddy. When I connect it to an internal drive cable, I get a SMART error and the PC hangs on the boot.

Have also tried Minitool Partition Wizard and some other data recovery apps, which CAN see the external drive, but they can't find or recover any partitions.

Suggest you check with Minitool as they offer a free trial of a data recovery app that might work for you.

This is the first time in years that I've had a drive fail and NONE of the data recovery apps have been able to find anything on the drive.

I've resorted to sending it off to a local data recovery service and am awaiting a quote.

1 more replies
Relevance 78.31%

Hi all, Let me start off by saying i have spent the last few hours looking online for anything that would be able to help sort out my problem and found your forum the most helpful and the only one i have signed up to. So thankyou in advance.

I have a WD1200D036 (2.5 120GB external) that is not showing in My Computer nor was it showing up in DM but after going to device management\Disk Drives then Volumes tab and clicking on Populate it turned up in Disk Management as: Disk 1 Unkown not initialized. when i click on it and select initialize disk it opens up and asks me to select disk 1 and what partition style (I just sent with MBR) then click ok. It pops up with a error "Incorrect Function"

Any ideas??

Answer:Exteranl HDD - Unknown, Not Initialized and no disc size in Disk Manag

Hi

I would suggest verifying the health condition of your hard drive first. You can use "WD Data Life Guard Diagnostic" to do that.

Download : WD Support / Downloads / Legacy Internal / WD RE2

The WD tool will list both your internal HDD and USB HDD for testing. Select the USB one and choose "Extended Test" to run. Let us know the test result in next reply.

https://www.youtube.com/watch?v=h-BkCVTAmL8

2 more replies
Relevance 77.49%

Hello

I am trying to recover data from my external HD 1 TB Fantom Drive GreenDrive. It crashed and I had no choice to force power down. When I look into Disk Management - I see that Disk 1 Unknown Size Not Initialized.

See Disk Man.JPG for printscreen of Disk Management.

I tried following the Mini Partition Tool advice and did not find the external drive on the software. Please see Mini Partion Tool.JPG for print screen.

I am thinking about buying another external HD 2TB and clone this drive to recover the data. Any advice to clone a drive that I cannot select.

Thanks in advance for your help!

Answer:Fantom Drives GreenDrive Disk 1 Unknown, Not Initialized - Data Recove

Quote:
It crashed


I've seen that and the HDDs had truly crashed, wasn't anything I could do but in a couple of instances I sent them off to a firm that recovers data if the platters/disks in them haven't been physically damaged. Sometimes the read-write heads will scratch the platters and they are then truly screwed up.

8 more replies
Relevance 77.49%

I have an WD 1TB hard disk which failed to initialize recently. It gives me an I/O error message. I found a few old threads here with similar problem and tried out the suggested steps. I ran WD diagnostic tool and passed the Quick test and Extended test(Screenshot attached). I would like to avoid the zero test and formatting of my data if possible. The hard disk is almost full and recovering them after formatting would be really painful. I would be really grateful if someone could please help me out?

Answer:1TB WD external hard disk not initialized

Is you have a empty hard drive kicking about or somewhere to store you data, move it all to there.
Then format you drive, see if that works.

9 more replies
Relevance 77.49%

Hi,
I have an WD Elements 1023 external hard drive which I want to connect to my laptop which runs a 64 bit Windows 7 Home Premium. When I connect the device, it shows up in the device manager and the driver is installed properly.
However, it doesnt show up as a drive and in the Disk Management, it shows as Disk1 unknown. When I try to Initialize the disk, I get a error that the "The Media is write protected".
Its been a real pain as I have a lot of data init and unable to access it.
It wud be great if anybody could suggest me a solution for this.
Screen shot of how the drive appears in the device manager
https://picasaweb.google.com/114564433723979804644/March3201202#5715608574510479554
Screen shot of how the drive appears in the disk manager
https://picasaweb.google.com/114564433723979804644/March32012#5715607129219976018
Regards
hechesspee

Answer:External HDD not getting initialized in Disk Manager

Have you tried this on another PC - is it recognised?
Have you tried manually assigning a drive letter in disk management? This article gives you step by step instructions on how to do this.

1 more replies
Relevance 76.67%

I see the external disk in Disk Management but it is not getting displayed in My Computer nor any data recovery software is detecting it :(
Image attached..
When I right click on disk 1 Initialize Disk option is also disabled.

Please help!
-Zia

Answer:Seagate external hard disk not getting initialized

What are the other options when you right click on the disk?

4 more replies
Relevance 76.67%

This drive was originally a Maxtor back-up drive that my brother in law could never get to accomplish a successful back-up routine when running on his XP desktop system or his new Vista laptop. He gave it to me and I installed upgraded software and tried it on my Vista x64 system and again recieved "back-up failed" error messages. I decided to delete all contents on the drive and use it as a basic external storage drive. My problem is now my system see's it as "Drive not yet initialized". How do I initialize this drive?It's a Maxtor One Touch III, 200 Gb. 

Answer:Disk not initialized when trying to format external USB drive

Do it thru Disk Management...right click My Computer...select Manage...then Disk Management.

1 more replies
Relevance 67.24%

My PC wouldn't boot off the SSD (with Win 10 OS). It said there were boot problems and tried to diagnose the problem but it doesn't boot. I'm now using the original HD with Win 7. I'd like to get the SSD working if I can. The SSD is OCZ - 240 GB or so.

But between last night and today, the SSD has gotten worse. I can't access it at all now. Last night I was able to access it as an external drive. What I did in between was a chkdsk of the HD just to make sure it was OK. Then this morning I saw that the SSD had problems.

Disk Management shows the SSD as disk 1, but it has no information on it. It just says the disk is unknown and uninitialized.

I saw a recommendation for Partition Wizard 9.1 Free. But that doesn't show the drive at all. I attached screen shots as a Word document.

Any help would be greatly appreciated.

Answer:SSD unrecognized - disk management says "unknown" and "not initialized

Please use this tutorial by Golden. It will allow members see what you have.

Disk Management - Post a Screen Capture Image
Jack

2 more replies
Relevance 66.42%

Hi, My Seagate 2TB external hard disk is not getting detected by my PC, doesn't show in 'Safely remove hardware' option.

However, based on one old thread, I installed Partition Recovery Wizard and this is how the scan looks. Please help.

Answer:External Hard Disk not detected, visible in Disk Manager

Please find the screenshot of disk management

9 more replies
Relevance 66.42%

Hi, My Seagate 2TB external hard disk is not getting detected by my PC, doesn't show in 'Safely remove hardware' option.

However, based on one old thread, I installed Partition Recovery Wizard and this is how the scan looks. Please help.

Answer:External Hard Disk not detected, visible in Disk Manager

Please find the screenshot of disk management

9 more replies
Relevance 66.42%

I have a problem regarding my external Toshiba hard disk 500 GB where it can?t be detected in my computer and also disk management. I have formatted the external HD since I was asked to format it when an error popped up.
So I formatted it and after the formatting completed, I tried to connect the hard disk to my Windows Win 7 laptop. When I connect it to the laptop, it can?t be detected and yet the hard disk is blinking with its white light like it used to when it is connected to the laptop. I tried the disk management thingy, but it can?t detect my hard disk. I tried in other laptops but the result is same
What can I do to make it better? Please help me.
 

Answer:External hard disk not detected in My Computer and in Disk Management

First off, how old is your Toshiba external HDD? Also, when it starts to spin up, do you hear any sort of clicking or whining noise?

If you hear any noises that sound off, it's possible your external HDD is failing.

When you formatted it, what file system did you use to do so? Because sometimes even if Windows can't detect it, I have had success with booting with a Ubuntu Live CD, and then connecting the external HDD in order to format it that way. It all has to do with how Windows formats HDD's and how Ubuntu and other Linux systems do.

If you can I recommend downloading Ubuntu onto a CD and boot to it on one of your computers, in the Live CD mode, so it doesn't install anything. Once its loaded, plug in the Toshiba and try to format it as NTFS (this is important, because Ubuntu doesn't use it as a native file system, so you need to make sure that NTFS is selected on the format window, not EXT4 or the other types of Linux OS File Systems)

If it doesn't work, post back here, and I will see if I can help you some more. Also feel free to PM me if you have any other issues.

Regards,
-Alex
 

1 more replies
Relevance 63.55%

Hi there,

So I had a desktop with a single HDD running windows XP, the desktop overheated and automatically shutoff. The next time I powered on the PC, nothing happened - no BIOS, no beeps, nothing! The PC was pretty old so I just figured it had run it's course and I was thinking about getting a laptop anyway.

So I got a new Windows 7 laptop, and after a few days of setting it up I yanked out the hdd from the old XP desktop and plugged it into the laptop's USB port via some SATA to USB cables.

Win7 recognized new hardware and and seemed to install the drive correctly as "USB Storage", but nothing ever appeared in the Windows Explorer. I opened up the device manager and under 'Disk Drives' I saw a 'USB Drive' item. The properties on that item seemed to indicate all the drivers and such were properly installed and the 'device was working properly'. Under the 'Disk Management' section, the disk showed up - but it said it was 'unknown' and 'not initialized', so no partitions showed up (it also prompted me to 'initialize' it, which I DID NOT do).

At this point I've tried several recovery programs, but the biggest issue is that none of the programs actually see the drive, so I can't run the recovery at all. I even tried Hiren's Boot CD, but again, nothing sees the drive - although, I think that I didn't properly install the USB drivers, so I may try that... Read more

Answer:HDD - unknown, not initialized

Does this drive spin up at all? Listen carefully for any "clunk" noises. It may well have died.
 

5 more replies
Relevance 63.55%

About 5 days ago my Seagate 3TB Barracuda HDD started running very slow. Transfer speeds dropped to 182kb/s it previously was around 25.6mb/s. So I started backing up as much as I could, but after 5 days and only getting about 300GB backed up I decided to run chkdsk on the drive. That was a bad idea because now I cannot access the drive at all, and I still have 2.12TB of data that isn't backed up.

Drive has been in use since November 2013
It had over 106,000 files on it.



Things that I tried before Chkdsk:

The drive letter used to be M:
In My Computer I had the drive renamed but it changed itself to local disk

Seatools - Passed all the tests when I was able to access the drive. But the drive info said the power on hours were 0 and the drive temperature was 32 degrees F, other external drives were showing around 30,000 power on hours and temperatures around 130-136 degrees F, the one internal drive showed 72 degrees F

Crystal Disk Info - Showed Unknown Drive and no Info

Crystal Disk Benchmark: Took a long time to run but I posted a screenshot of the results

I plugged the drive into a laptop, had the same results

I tried replacing both the power cable in the USB cable, same result

I tried plugging the USB into a USB 2.0 port instead of the 3.0 that it had been in, still the same exact transfer speed

I tried changing the HDD's policies to Better Performance instead of Quick Removal. Same results

I tried to update driver but it says its up t... Read more

Answer:Unknown HDD, Not Initialized (Help)

I may also be worth noting that, all my HDD's are setup for quick removal, but i am unable to right click and safely eject any HDD or flash drive on my PC for as long as I can remember. It always says the drives are still in use.

2 more replies
Relevance 63.14%

Hi, i got a problem my toshiba drive doesn't show up on my computer and when i went to the driver mangagement it disk 3 and it unknown not initialized. ill try to unstill and restill didn't work can anyone help me please.

Answer:unknown not initialized on window 7

Hello Chrissy,

Can you open a command prompt by going to Start > Search "cmd" > Right-click on CMD and select "Run as administrator"

Then run the command diskpart and then list disk

Then follow the link below to post it here:
Screenshots and Files - Upload and Post in Seven Forums

9 more replies
Relevance 63.14%

Hello,
New here to this forum. Been searching and reading for the past week trying to get my HDD to work.

I was able to access my external HD about a week ago, watched a movie off it and fell asleep. When I awoke the next morning, powered on my laptop, it wouldn't boot up so I shut it down and unplugged the HD and powered it back on. Plugged the HD back in, computer sees it but not showing in My Computer.

Within Disk Management, it shows Disk1 - Unknown - Not Initialized.

Searched and searched and searched for different solutions, tried different things and still nothing. I have tried PW but not showing up to be able to scan it. I have a docking station so I pulled the HD out and plugged it into that. PW was able to see it but no partitions found. Tried to run TestDisk (per some other help treads instructions) with nothing found.
I have ran EaseUS recovery, recovered some files but none which were readable.

I have lots of important files on this HD and I really need them. Sending it to a professional is out of the question.

I'm currently about to boot up pendrive and see if it sees anything there.

I can post any screen shots and try anything again. I have done nothing but scans scans scans.

Thank you!

Answer:WD My Book 3TB Ext HDD - Unknown - Not Initialized

Hi HAPPYSOk,

Welcome to Seven Forums.

I would have been happy to help you had it not been a Western Digital External drive.

Is your drive's model No. this WDBFJK0030HBK?

Your drive is hardware encrypted and should the interface card that contains the encryption chip and the decryption key fail, even if the HDD itself is good, you can't get your data out by hooking it up as a second drive in a dock or sata connect on a desktop. You can get what data is there inside but it will be the encrypted data.

Your statement "I have ran EaseUS recovery, recovered some files but none which were readable." confirms this.

The only way you can get your data back is to send the enclosure and drive to the Western Digital patronised Data Recovery Partners listed by WD here WD Support / Data Recovery Partners. Only they have been supplied with the decrypt key by WD and they will do it in a jiffy for you.

Free consultation, So get a quote from them and you will never again buy a WD drive, I am sure.

CarltonBale.com ? Western Digital MyBook Drive Lock Encryption ? Failure and Recovery

Good Luck.

4 more replies
Relevance 63.14%

i have a hard disk 1 TB (i was 5 partitions)..suddenly it did not open..i treid to open it in disk management software it shows picture 1
i treid to open it with the software minitool partition wizard professional it shows its size is negative
how can i solve this problem

Answer:disk1 unknown not initialized

First thing I'd do is try to run the hard drive manufacturer's disk tools on the drive. It may be dead or dying. Shows as "bad disk" with no file system in PW.

And I'd hope I had a backup of whatever is on it.

1 more replies
Relevance 62.73%

Hi,I have a AMD ATHLON XP 1800+,Windows XP SP2, my external hard disk is not getting detected can someone help. It is a new hard disk and it's the first time I am using it.ANy help or suggestions?

Answer:External Hard DIsk not getting detected

Go Start>Run, type in:diskmgmt.mscClick OK.Is it listed there?

14 more replies
Relevance 62.73%

Hello All,

I have a 250 GB external hard disk. I copied some movies onto it from a friend who now says that his drives were affected.

The hard disk ran but after I removed it and plugged it in again, it is not being detected by any computer. The blue color light glows and I can feel the motor running but it is simply not being read by any computer.

Can you please help me with some suggestion ?

I thank you in advance,

Kanwer
 

Answer:External hard disk not detected

I tried to plug it in again, now it makes some strange noise as if some things it stuck and its scratching against something, its a start stop kind of noise. And then it makes the sound, which a USB device makes when it is plugged out !!!
 

4 more replies
Relevance 62.73%

I brought a Seagate Expansion Hard Disk about six months ago and have never had problem with it till now....
The problem is that my HD does not get detected if its plugged in after the windows startup.... In most cases it hangs my PC. The green light blinks so I'm positive that it's not a problem of the HD. The safely remove hardware icon also comes up. But the Autoplay menu doesn't show up and its icon wont be there in My Computer (that is, if I'm able to open My Computer. As I already stated, in most cases, the PC gets stuck).
I discovered that there are no issues if I keep it plugged in the USB port before the startup, but that is an inconvenience since I only have one free port . Ive tested with other pen drives and they work just fine. I even tried plugging it to a different port, but to no avail. It would really nice if you could help me with this....
Thnx in advance.....
 

Answer:External Hard Disk not being detected...

Try it on another machine. It sounds like the drive is having some problem. Run chkdsk /r on it in the other machine and check for bad sectors.

Hopefully, the data was backed up recently. External drives are the most unreliable of all storage media. If not, you better make a fresh backup in case something is wrong with the drive.
 

2 more replies
Relevance 62.73%

Hi guys. I'm new here. I've tried to read all the discussion about how to fix the unallocated hard drive but I just can't understand it as the cases were pretty much different than I'm facing of.

Here's my problem.
Yesterday my external hard drive seems normal, everything is fine, until there's a blackout and I have to put "sleep" to my laptop. After the power got back, the hard drive suddenly gone and when I check the list of drives under "Disk Management", it showed up as "Disk 1 - Unallocated".

(I've attached screenshots here for your viewing)

My external hard drive is WD My Passport 1TB. It contains a lot of valuable data I cannot afford to lose. I really hope there's a way to fix this, and once I get back all of those precious data I will buy another HD to transfer them ASAP because I cant let this happen to me again.

Your help is so, very much appreciated.
Any questions regarding my problem, let me know. I'll provide all of the details you guys need.

NOTE
1) I've tried TestDisk but on the "Analyse" process, it says "read error"
2) I've changed cable, but the situation remains the same.
3) I've tried Recuva, but it doesnt recognize my external drive.

Answer:WD EXTERNAL HARD DISK 1TB suddenly "unallocated" and "not initialized"

Hi!

First don't mess up with the WD drive settings.. download partition wizard 7 (its free)..then .. open it ..click wizard(menu) .. select partition recovery wizard.. and it will find the partitions on it i think.. that way you can recover your partition that has been lost.

9 more replies
Relevance 62.32%

Yesterday while using my computer my secondary drive / storage drive disappeared. I can see it in Disk Management, but I tried to use MiniTool, but it cannot see the drive. I have attached a screen shot for more info.

Is it KIA or recoverable long enough to save a couple files at least?

Thanks!

More replies
Relevance 61.91%

Hi.

Well, I have a problem with my WD external disk P/N WDBAAUA0010HBK-01 (1TB)

The drive is detected as H Drive, but it said "H drive not accessible. The Parameter is incorrect."
I checked on MyComputer>Manage and I formatted disk as I read on other forums as a solution.
After formatting I didn't recognize any aprovements. As recommended I did a CHECKDISK, which I used TESTDISK.exe file from downloaded Zip File and here is what is says... Please check the attachment.

If you might help with any suggestions, PLEASE do.

The drive is still uder the test...it goes very slow...

Thank you in advance

Answer:WD external disk problems, error detected

I added Computer Management opened file to see what it shows.

6 more replies
Relevance 61.91%

Hi

I joined the forum as the activity seemed high and knowledgeable . Here is my problem.

I have an 500 Gb external hard drive (one of those slimeline jobs) and use it for backup and external storage fvrom my personal laptop.
It worked fine for ages and for a while I didn't use it (didn't need it).

When I went back to use it recently it wasn't detected by my laptop (Win 7) anymore. I can feel and hear it spinning but it is not being detected. Being somewhat technical I tried the following


- I went to my local PC hardware store and bought a new cable. They helpfully plugged it in there and it showed up straight away there.
- When I got home I plugged it into laptop and again not detected.
- I trawled around disk management and no luck in it being seen.
- We have a desktop PC in the house (running Vista) and when I plugged it in there it was seen find there as well.
- My other USB devices are not having any problem so as far as I know the ports are fine.

Any ideas as I am tearing the hair out of my head

Answer:External Hard Disk not being Detected (only on my machine)

Have you tried plugging it into a different usb port on your laptop? When it's plugged in, what does your device manager show...any yellow triangles or question marks? Is there any software/firmware to download?

4 more replies
Relevance 61.91%

external hard disk was connect and detected also but not show in PC win8.1

More replies
Relevance 61.91%

Hey,
I had my external hard disk connected to my laptop, and the wire accidentally came out for a second. But right away, it reconnected to my laptop. However, rather than working normally, my computer detected it as a new drive. And then I don't know what happened but it wouldn't be detected at all.
The light on the hard disk is on, so I know it's not an issue with the power. But I don't think it's being detected anywhere on my computer because no pop-up or anything appears to install a new hardware. Nor is the drive visible in My Computer.
I tried reinstalling but to no avail. I also tried disconnecting and reconnecting the hard disk a number of times. Any help would be appreciated. Thanks.
 

Answer:Solved: External hard disk not detected

Actually I've got it to work. So kindly remove this thread.
 

1 more replies
Relevance 61.5%

Hello,

My laptop's OS is 64 bit Win 7 Home Premium. I've been usng my Portable 1TB WD Elements SE external HDD for over 2 years. One fine day Win 7 displayed "Do you want to scan & fix removable drive G:" prompt. I check marked both subsequent boxes on the prompt and clicked Scan & Fix. After complete execution of the Scan & Fix (after 12 hrs approx) my Portable 1TB WD Elements SE was shown as Unallocated, Not Initialized & Unknown in the Disk Management and clicking on it windows explorer My Computer window showed the HDD with a Letter but on clicking it an error pop-up with text "Drive G: is inaccessible. Access Denied." was displayed. However, I can still see a "Safely Remove Hardware" icon that gives me a successfully removed hardware message.

I need to recover the data present on the Portable 1TB WD Elements SE external HDD.

So far I've tried Free Trial versions of RecoverMyFiles(Extended Scan), Stellar Phoenix Data Recovery(Extended Scan), Kernell Data Recovery (Extended Scan), Partition Wizard MiniTools (Quick Scan). All of them have scanned the HDD for 12 hours approximately without locating any files for recovery. Partition Wizard MiniTools detected the HDD as a Bad Disk.

Subsequently I tried PhotoRec. It scanned the HDD for 24 hours without any positive result. During pass 0 & pass 1, scanning it kept displaying error reading sector "so and so". But the files didn't populate in the recovery fo... Read more

Answer:Portable 1TB WD Elements SE Un-allocated, Not Initialized & Unknown

Hi

The symptoms you posted clearly indicates a hardware issue.






Quote:

Subsequently I tried PhotoRec. It scanned the HDD for 24 hours without any positive result. During pass 0 & pass 1, scanning it kept displaying error reading sector "so and so".



It means the disk surface is severely damaged (has developed pretty huge number of bad sectors ). At this point, Imaging the disk and working on the copy is the best step you can do. I would suggest ;

- Create a RAW disk image using "ddrescue". Since your HDD is a 2TB one, you need a larger capacity drive like 3TB one to store the image.

- Try the trial versions of "GetDataBack" and "R-Studio" on the RAW image. Both supports working with disk images created by "dd" and "ddrescue".
GetDataBack for NTFS Tutorial on scanning an image - YouTube

9 more replies
Relevance 61.5%

I had a WD 2TB external drive which I transferred successfully to a USB 3.0 enclosure months ago. Then I moved and the drive has been packed away in the trunk of my car since.

I just got it out as I need some files on it, and when I hooked it up it didn't work: the computer recognized it as a CD drive or something... in Computer it would not show up or show up as just a drive letter ... in disk management it said No Media. I tried it on another PC too to no avail.

After much research, the most likely solution looked to be to get a new enclosure. So I did, but the drive still isn't working, but in a different way.

When I first hooked it up, all looked well: the system tray showed correct recognition of the drive and enclosure type/brand and installed the drivers successfully.

But the drive no longer shows up in Computer at all, and in disk management it now prompts me to initialize the disk, and has it marked as Unknown, Not Initialized.

I have spent all day trying to fix this problem, and have read a million threads on different sites and tried everything, to no consequence. I need the files on the drive, and have tried all of the following:

- booting in ubuntu and knoppix via cd - drive is not recognized

- every major app for this type of problem i saw recommended: seagate seatools, partition wizard, wd data lifeguard diagnostics, power data recovery, find and mount, a bunch of stuff on hiren's boot cd, test disk, etc.

In most cases, the drive was no... Read more

More replies
Relevance 61.5%

I had a WD 2TB external drive which I transferred successfully to a USB 3.0 enclosure months ago. Then I moved and the drive has been packed away in the trunk of my car since.

I just got it out as I need some files on it, and when I hooked it up it didn't work: the computer recognized it as a CD drive or something... in Computer it would not show up or show up as just a drive letter ... in disk management it said No Media. I tried it on another PC too to no avail.

After much research, the most likely solution looked to be to get a new enclosure. So I did, but the drive still isn't working, but in a different way.

When I first hooked it up, all looked well: the system tray showed correct recognition of the drive and enclosure type/brand and installed the drivers successfully.

But the drive no longer shows up in Computer at all, and in disk management it now prompts me to initialize the disk, and has it marked as Unknown, Not Initialized.

I have spent all day trying to fix this problem, and have read a million threads on different sites and tried everything, to no consequence. I need the files on the drive, and have tried all of the following:

- booting in ubuntu and knoppix via cd - drive is not recognized

- every major app for this type of problem i saw recommended: seagate seatools, partition wizard, wd data lifeguard diagnostics, power data recovery, find and mount, a bunch of stuff on hiren's boot cd, test disk, etc.

In most cases, the drive was no... Read more

More replies
Relevance 61.5%

Hi,
I purchased my XPS 13 9360 in Dec 2017 only. I tried connecting my headphones, normal 3.6mm jack. I think it's a loose connection or something. It's not getting detected or plugged in completely.

Also my USB External Hard disk is not even detected or being read. Absolutely nothing happens when I connect it. It's not even recognizing the device.

Kindly let me know the solution for this.

Answer:XPS 13 9360 External Hard disk (USB) and headphones not detected

You have 30 days to return for receive a full refund.
Consider doing that.

2 more replies
Relevance 61.5%

I am having a 650GB Samsung Hard Disk. Once I was transferring files from the hard disk to my PC and lights went out. Now when I connect my hard disk it is not being detected though it shows up in the Disk Management menu. I have tried formatting the HDD but it shows time remaining as 300 hours so I had to stop it midway. Is any other solution available for it...??? Please help...!!!
 

Answer:Samsung 650GB External Hard Disk Not Being Detected

If you feel confident enough, Open it up and remove the hard drive from inside the enclosure and fit it directly in to your pc.

This will help determine if the hard drive or enclosure is to blame.
 

3 more replies
Relevance 61.09%

Hi.
My external (seagate) hard drive can be detected, but it won't show on My Computer. I tried few options however the device is still not being recognised.

It appears in my device manager. I have uninstalled it, plug my hard drive back. It gets detected, but it still won't appear in My Computer.

It also appears in disk management. It's shows as Disk 1 Unknown, Not Initialised and the right column is blank.

I downloaded the MiniTool Partition Wizard and attempted to recover my data. I completed all the steps expect the last step as I can't right click to give the drive a letter.

I have important unbacked information on this device. Any help would greatly be appreciated. Thanks

Answer:External Hard Drive Not Detecting. Disk 1 Unknown.

Hello Liyah,

Your screenshots are two small to be able to read.

For now in Disk Management, see if you area able to right click on the smaller Disk 1 box in the lower pane, and click on an Online or Initialize option in the context menu. Afterwards, make sure the disk has a drive letter.

Disk - Set as Offline or Online

Hope this helps for now,
Shawn

9 more replies
Relevance 61.09%

I have a internal 3.5" HDD WD Black 2 TB and try to hook it up in the PC but it doesnt not appear anymore in My Computer. It was working few weeks ago. When opening Disk Management it says the disk is not initialized and it didnt state how many GB available on the hard disk (unallocated). Disk Management tried to initialized the hard disk and it pops out the following errors:
1. Virtual Disk Manager: Incorrect Function
and
2. Virtual Disk Manager: The device is not ready.

I have also tried using a powered USB cable and also connected in directly to the MoBo via SATA but the problem still persist.

I also ran disk part and it shows Disk 3 and Disk 4 as both online but both having size of 0 B

Below is the screen shot of Disk Management. When i right click on the HDD, there are four functions: Initialize Disk, Offline, Properties and Help however the the Initialize Disk function is greyed out.

I have Partition Wizard 9.1 and the attached picture below is the screenshot of the main GUI. It shows bad disk on the particular hard disk
I tried running Partition Recovery Wizard on the mentioned HDD and it shows a partition of only 512 Bytes but none of my files are visible (no preview)

I just need to retrieve the files in the Hard disk as it contains important files and pictures that havent been backed up. Any help and suggestions are welcomed! Thanks

Answer:disk not initialized in Disk Management. Device Not Ready.

This thread is continued on sevenforums:
disk not initialized in Disk Management. Device Not Ready. - Windows 7 Help Forums

1 more replies
Relevance 61.09%

I have a internal 3.5" HDD WD Black 2 TB and try to hook it up in the PC but it doesnt not appear anymore in My Computer. It was working few weeks ago. When opening Disk Management it says the disk is not initialized and it didnt state how many GB available on the hard disk (unallocated). Disk Management tried to initialized the hard disk and it pops out the following errors:
1. Virtual Disk Manager: Incorrect Function
and
2. Virtual Disk Manager: The device is not ready.

I have also tried using a powered USB cable and also connected in directly to the MoBo via SATA but the problem still persist.

I also ran disk part and it shows Disk 3 and Disk 4 as both online but both having size of 0 B

Below is the screen shot of Disk Management. When i right click on the HDD, there are four functions: Initialize Disk, Offline, Properties and Help however the the Initialize Disk function is greyed out.



I have Partition Wizard 9.1 and the attached picture below is the screenshot of the main GUI. It shows bad disk on the particular hard disk
Click image for larger version.



I tried running Partition Recovery Wizard on the mentioned HDD and it shows a partition of only 512 Bytes but none of my files are visible (no preview)



I just need to retrieve the files in the Hard disk as it contains important files and pictures that havent been backed up. Any help and suggestions are welcomed! Thanks

Answer:disk not initialized in Disk Management. Device Not Ready.

I submitted this post in tenforums and sevenforums on an old thread. Its better to start a new one. THis is the reply from jumanji from the sevenforums thread. I will continue posting replies on this thread instead
disk 1 is unknown, not initialized, unallocated








  
Quote: Originally Posted by jumanji


I am still trying to understand your system.

Please furnish the following Information.

1. You have a Windows 10 System. Is it a custom-built one? Built by you?

2.In the Windows Disk Management I see three drives.Disk 0, Disk 1 and Disk 2. All three Internal?

3. You are now trying to plug-in /connect two drives. But both of these cannot be accessed. Right?

Now the crucial question. 4. Where were these drives before? Please give the history of both drives. Both drives data drives? What happened to the system from which they came?

I may not be able to deal with the drives connected to Windows 10 - for I don't know how it will treat alien drives. As I see it both drives are bad ( In Windows 10).

I do understand that you have a SATA to USB adapter. Can you just take one drive - mark it as No 1 --, connect it to a Windows 7 system and post the screenshots of Windows Disk Management and PW screenshot? Always post full screenshots with all information seen and not truncated/cut screenshots.

Mark the other drive as Drive 2, unplug drive No.1 , plug in drive No2 and again repeat the screenshots. We shall not mix driv... Read more

3 more replies
Relevance 61.09%

I have a internal 3.5" HDD WD Black 2 TB and try to hook it up in the PC but it doesnt not appear anymore in My Computer. It was working few weeks ago. When opening Disk Management it says the disk is not initialized and it didnt state how many GB available on the hard disk (unallocated). Disk Management tried to initialized the hard disk and it pops out the following errors:
1. Virtual Disk Manager: Incorrect Function
and
2. Virtual Disk Manager: The device is not ready.

I have also tried using a powered USB cable and also connected in directly to the MoBo via SATA but the problem still persist.

I also ran disk part and it shows Disk 3 and Disk 4 as both online but both having size of 0 B

Below is the screen shot of Disk Management. When i right click on the HDD, there are four functions: Initialize Disk, Offline, Properties and Help however the the Initialize Disk function is greyed out.

I have Partition Wizard 9.1 and the attached picture below is the screenshot of the main GUI. It shows bad disk on the particular hard disk
I tried running Partition Recovery Wizard on the mentioned HDD and it shows a partition of only 512 Bytes but none of my files are visible (no preview)

I just need to retrieve the files in the Hard disk as it contains important files and pictures that havent been backed up. Any help and suggestions are welcomed! Thanks

More replies
Relevance 60.68%

Hi folks, I got my Lenovo G50-70 just 2 months back. It was working good but now this laptop is unable to detect any External Hard disk / Mobiles, which were detected and working well with my laptop routinely. Anybody has any solution for this problem. plz post. Many thanks in advance.  Regards,MA

Answer:Lenovo G50-70 External Hard disk / Mobiles not detected by laptop

Hi Nueva_entrada2,
 
Welcome to the Forums        
 
As per the query we understood that you are facing issue with USB port in your Lenovo G50-70 laptop.
 
Try to update the USB driver and check for the issue, check if the USB is enabled in the BIOS.
 
Click here for the USB driver.
 
Hope this helps. Do post back if the issue persists!                                                   
 
Best regards,                                                          
 
Ashwin. S





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

2 more replies
Relevance 60.68%

WD 250GB MyBook External Disk Drive can be detected but cannot be explored

I neeeeed your help on this. I have been --up and down looking around for a solution. Many did came through-- but I don't know which is which.
 

More replies
Relevance 60.27%

I have had the same Toshiba external hard drive for years and have never had any problems plugging and using from any machine, mac or pc. I recently had to reformat my hard drives and re-install windows 7, and ever since I have been unable to access my external from this machine. It still works fine on my laptop, and when I plug it in to my tower, it still recognizes that "External USB 3.0" has been plugged in and downloads the drivers. However, the drive appears neither under my computer nor disk management, nor diskpart -> list volume. It does show up in my device manager as USB mass storage but uninstalling the drivers and plugging it back in does nothing. Is there anything I can try before moving all my files off and formatting the drive, and will that even help? Thanks for reading.
 

Answer:Solved: External hard drive detected but not under my computer or disk management

15 more replies
Relevance 60.27%

Hello, i am using a seagate 1TB harddisk. When i connect it to usb port in front panel of my CPU, the computer is not detecting it.

But When i connect it to usb port in back panel of my cpu, It works fine. My system detects the hard disk and and everything is fine. How to correct this strange problem

Note : my Pen drive and other USB things works fine in all the ports in both front panel and back panel.
Please help me.each and Every time when i want to connect my hard disk, I have to take my CPU out from its shelf and connect it in the back usb port. Its tideous for me.
 

Answer:Seagate external hard disk not detected in front panel USB port

Well not exactly knowing what type of a computer we are talking about here, I can only say, that what your are reporting is completely normal. Most computers I've ever touched have passive styled USB ports on the front of the computer, and aggressive USB ports off the back that can handle just about anything you can hook up to it.

So stop trying to connect that external hard drive off the front, not enough power and not enough data exchange rates. I would recommend that if you have all your USB ports off the back of the computer taken, I would start thinking seriously about an "amplified" 4 port USB HUB. Remember the HUB your looking for has it's own power source, and does not relying on the computer at all for it's power.

The following one is a good one, a friend of mine got her's about a month ago and has not yet reported any problems.

http://www.newegg.com/Product/Produ...+-+Network+/+USB+/+Firewire-_-Syba-_-17801083

Hope this all helps....
 

1 more replies
Relevance 60.27%

I have an Asus Vivotab Smart running full Win8.1 and a Western Digital My Passport 2TB external HDD. The hard drive works fine on other computers running 7, 8 and 8.1. The tablet can read other hard drives fine as well. But this one hard drive will not function on just the tablet. I've tried deleting the drivers and letting Windows reinstall them as well as installing the latest drivers from the WD site. I've tried using a different cord, a different adapter and other USB devices on the tablet. The HDD shows up in Devices and Printers when plugged in but not Explorer and NOT Disk Management at all. Now if I delete the drivers it appears in Disk Management as an offline and not initialized drive, no drive letter. I can't initialize it and trying to set it to Online results in an an I/O error. When i unplug it and plug it back in Windows appears to be reinstalling it, but then it's back to not appearing in Disk Management at all.

This occurred when it was just Win 8. I upgraded to 8.1 and it worked for about 8 hours. The drive installed and functioned 100% after upgrading to 8.1.....and then just stopped working again. Same issue. Again, the drive works fine in every other computer I connect it to. Every other drive and USB device works fine when connected to this tablet. Just this one drive on this one tablet refuses to initialize.

Any ideas?

Answer:Wd External HDD Not initialized

Tablet might not have enough power thru USB, smaller devices could work and this one is probably pulling too much. If that's the case you can connect it thru an USB splitter with it's own 5V power supply but that won't make it as portable.

3 more replies
Relevance 59.45%

I have an external hard drive from home (160 GB iOmega) formatted in I believe FAT32 with all my data on it from my iMac. I'm trying to connect it to my new ThinkPad to get my data. It doesn't show up in My Computer, but in Disk Management there is a Disk 1 that has a black bar at top instead of blue, says not initialized on the side, and says unallocated under the bar. Also, when I open Disk Management it offers to initialize my disk, but I fear that would erase my data.

How would I get my computer to read the disk but not erase my data?

Answer:External HD not initialized, need data from it

Welcome to Seven Forums.
Here is a pretty good trouble shooting guide Troubleshoot: Windows won't recognize USB hard drive / fix unassigned drive letter - TechSpot OpenBoards You might want to try some of the suggestions posted.
Fabe

9 more replies
Relevance 59.45%

I have a 300GB usb external hdd, when I plug it in it beeps but does not show in "Computer". I right click on Computer/Manage/Disc Management and it shows there as 298GB Disk 2 Not initialized. A box appears, saying you must initialize before Logical Disk Manager can access it. When I click on OK I get the message Data Error (Cyclic Redundancy Check)
If I go to the box to initialize it everything is greyed out.
There is nothing of any importance on the drive so if everything is lost it doesn't matter.

Answer:USB external hdd problem, not initialized.

This youtube video will help you do a chkdsk from Command prompt CLICK HERE if it works you might be able to recover the files.

3 more replies
Relevance 59.45%

Hi,
 
I'm not even sure what the topic title should be. But I can tell you about my problem.
 
I plugged in a new Bipra 250 GB NTFS external Hard Drive with the intention of using it to clone my C Drive.  A scan of the new drive reported no errors.  However, when I tried to run AOMEI Backupper it quit with this message: 
 
Information Code:4120 
Failed to adjust partition size.
 
Although I could see the drive when I clicked on Safely Remove Hardware, I could not find the drive in Explorer.
 
In Device Manager the disk was listed as Mass Storage Device USB Device.  I tried updating the driver, but MS says the driver is up to date.
 
In Disk Management, the disk showed  as Disk 1  Basic Online.   232.88 GB  - Unallocated. 
 
Online I found information that said to right click the drive and choose New Simple Volume.  I did that. It ran. Still the drive goes unrecognized and I am unable to clone it. 
 
I tried a reboot with the drive plugged in.  When Windows started, I could see the drive in Explorer but a message said:  Location not available.
 
Well, dirty word. -- And now that is gone too and the drive once more shows as unallocated in Disk Management.
 
More info online tells me to partition the drive after running New Simple Volume. But now I'm afraid to do that, and I don't know why that is necessary. 
 
Also in Disk Management Help the in... Read more

Answer:asNew external HD not Initialized?

Can you post an image of Disk Management with the USB drive attached?
 
Edit: You can use Partition Wizard to create a partition in the unallocated space and format it NTFS.

1 more replies
Relevance 58.63%

Hi all,

I'm having an issue where my external hard drive (WD Passport Ultra 2TB) is not displaying in my computer and is not initialized in Disk Management. This occurred after my computer crashed while I was pulling out data from the external hard drive. Now when I plug in the external hard drive, it has a clicking sound for a few seconds then stops with a blinking light.

I have tried using the MiniTool Partition Wizard and it does not detect it. When I open up Disk Management, it says that I need to initialize the disk before I can access it. I read somewhere that I will lose my files if I initialize this, so I have not done so. The Disk Management also does not show any unallocated space in it. Please see attached image.

Currently I just want to take out all the data from this hard drive before I let this drive go if I can't save it. Is there any hope for me to save my files?

Best regards,
Jeefster

More replies
Relevance 58.63%

Hi, thanks for trying to help me with this.

I recently moved and had my external hard drive disconnected and in storage for several months. It is a Western Digital model# WD500H1U-00. It has a separate power supply. There is a blue light on the front that is illuminated all the time, except when I connect the HD, then it will flash. When I got unpacked I hooked it up to my desk top and the computer would not access it. I then tried to install it on my laptop with no success. Since then I purchased a USB cord, with no luck.

This hard drive has a LOT of irreplaceable information on it. Formatting it is not an option.

Kevin at SpywareHammer.com was helping me with some other stuff and suggested I:

Regarding the ext HD, try this please:

1) Control panel===>administrative tools===>computer management===>Disk management

2) You'll Should see a list of Disks, Is Disk 1 listed with no partition letter assigned? if so continue

3) Right mouse click into the disk field, select Change drive letter and paths ===> choose a letter from the drop down, select OK. the HD should now be available.

No luck here either. When I right click on the disk field nothing happens. When I right click on the title block(?) I get: Initialize Disk (faded), Offline, Properties and, Help.
... Read more

Answer:WD external hard drive not initialized.

I also downloaded "MiniTool Partition Wizard Home Edition". That program did not recognize the HD.

9 more replies
Relevance 58.63%

Hi I have a wd 2tb external hard drive problem (i think its dead) Yesterday my hdd was working fine i powered down went to bed this morning I couldn't find my drive in my computer.
i opened up computer management and selected disk managment. at the top it shows my c drive and system reserved at the bottom it shows the c drive and drive 1 stating its not initialized.(see attached screen shot)
when i tryed to performe this task it gives me an error of the request could not be perfomed due to an I/O error.

i have checked all cables and replaced this hasnt helped.
i downloaded partition find and mount which shows my hdd but states it has 0kb (see attached screen shot).after scan no visable partitions no newpartitions.
i downloaded the wd hdd wizard and tryed to write 0 to the drive this failed.
I downloaded mini tool partition wizard that cant find the drive.(screen shot)
I took the hdd to a computer store he couldnt find it in disk management.
seatools for windows results cant find it
disk checkup ran results in screenshot cant run self test
HDD scan
all show 0KB no partitions so my question is is it dead???
 

Answer:WD External HDD 2TB not initialized I/O ERROR is it dead???

Hi, papaikolaou1980. Welcome to Major Geeks!

Unfortunately, none of the screenshots are showing here. But, if you've done everything listed in your post and the drive isn't showing properly, I'd say it "died" and if still under warranty, you should get a replacement. If it's a "green" series rather than "blue" or "black", I'd avoid getting another one as there have been many dependability issues with WD's "green" series.
 

1 more replies
Relevance 58.63%

I have this WD 1TB external drive that stopped working a while ago. I am trying to initialize it in order to perhaps try to recover data from it using a Data Recovery Wizard.

When connecting the drive via USB, it only sometimes shows up in 'Devices and Printers' as connected through USB (ie, it allows me to click 'Eject My Book' in the task bar). When it shows up there, I can also see it in Disk Management as 'Disk 2, Unknown, 931.51 GB, Not Initialized' with a little red downward facing arrow icon.

When I right click the icon (with the red arrow) and choose Initialize, it hangs a bit and then shows an error saying "The request could not be performed because of an I/O device error"

When I run 'USB device viewer' (UVCView) this is what shows up next to that device :






Quote:
---===>Device Information<===---
English product name: "My Book"

ConnectionStatus:
Current Config Value: 0x01 -> Device Bus Speed: High
Device Address: 0x02
Open Pipes: 3

===>Endpoint Descriptor<===
bLength: 0x07
bDescriptorType: 0x05
bEndpointAddress: 0x01 -> Direction: OUT - EndpointID: 1
bmAttributes: 0x02 -> Bulk Transfer Type
wMaxPacketSize: 0x0200 = 0x200 max bytes
bInterval: 0x00

==... Read more

More replies
Relevance 58.63%

Can you help me? I got the same problem, sometimes my external driver say it was online, not initialized and some times it RAW, i was watching a movie but i kicked my external driver so it was forced to unplug, since then when i want to plug in it again the driver can't show up
Well this is my friend external driver and inside it my friend have 300gb files please help me

Sorry for my bad english

Answer:external drive say it was online, not initialized, and sometimes RAW

Hi andremarb,

Welcome to SevenForums.

From the description of your problem, I would think that the cable could have got damaged due the unceremonious kick that the HDD received. So as a first step use a new cable and check how your external drive behaves.

If the problem persists, please start a new thread explaining your problem in detail. Furnish full details of your external drive make/manufacturer/ Model /Capacity along with a full screenshot of how the drive appears in Windows Disk Management. Please adhere to the guidelines here Disk Management - Post a Screen Capture Image

In the new thread, even if it is not me - so unreliable these days , some one else can address your concern. So move on with the new thread.

EDIT: Just noted that your post has been moved on to a new thread. But this post still holds - more details and screenshot after changing to a new cable.

1 more replies
Relevance 58.63%

Dear,
I have an external hard disk 4TB (Western Digital MyBook 25DA My Book Series - External Hard Drive | Western Digital (WD)) with bitlocker enabled (and i know the password).
I was working on it and everything was smooth.
I restarted the PC , after it's booting and logging in to windows, I didnt found the HardDisk in "This PC", I goes to windows 10 64 bit' disk management console and a popup window appears asking me if I want to initialize it.
Any solution do you have for this?

More replies
Relevance 58.63%

Hi,

My problem is as follows:
External Hard Drive (1Tb WD Elements) that I've been using for a few months now has data on that I would very much like to keep.
It was working fine until yesterday in which I tried opening a VS project which became unresponsive, tried closing everything down and turning off computer which just froze the computer leading to a hard reset (button held for 5 seconds)

Since then the External Hard Drive has not been shown in Windows Explorer and in Disk Management is shown as "Unkown" and "Not Initialized"


The Drive will still be seen correctly in Device Manager and if uninstalled it will say it has correctly installed and is ready to use.


Attempts to recover data or Initialize the drive have not worked and I have followed and looked up multiple ways to recover and other similar cases. I'm fairly certain for the data recovery the drive needs to be initialized (which just throws me an I/O error upon attempting the process) as looking at the Volume section in the properties of the device the size of the drive is listed as 0Mb.


My Last resort is taking it to a data recovery shop and hope they can grab the stuff on there.

Any help is muchly appreciated thanks.

Answer:External Hard Drive Not Initialized

I'm not up on WD Elements. Did that HD come with a form of Smartware, and in that Smartware, was there a utility that would come up and either ask you to type in the user-assigned password or it would automatically type in the saved password and pass same onto The System -- and unlock the WD Elements? I ask because I'm a little familiar with WD Passport, not WD Elements.

2 more replies
Relevance 58.63%

I did a clean install of Windows 10 64-bit & now one of my hard drives has an issue. While on the desktop I could access the disk but it was very slow to scan & took several minutes. Once completed it seems to indicate all the folders but I could not access any of them.

Though a restart might help but now it doesn't read at all. In Disk Management it says that disk says "Disk 1 not initialized".

Is it as simple as initializing that disk or might that cause reformatting in which I'd loose 1.2 Tb's of important data?

More replies
Relevance 58.22%

I have a external hard drive that's not initialized, but it recognizes with a messages pops up saying my drive is ready for use, but it doesn't show up under My Computer. I have a Windows 7 desktop PC that is a Home Premium 32-bit Anytime Upgrade. I'm thinking it's not fried, and I'm thinking that way because I received the message it found new hardware and ready to use? Or is it dead?

Also, I don't have a spare enclosure, and tools to open it up, so taking it out of the enclosure would be out of the question.

Thank you for any help!
 

Answer:Solved: External hard drive not initialized?

10 more replies