Computer Support Forum

lynksys ae1000 not digitally signed?

Question: lynksys ae1000 not digitally signed?

I cant connect to the net with a hardwired conection. I have the correct drivers for my wireless adaptor however it blocks the install because its not signed. I could have sworn that users could turn that off. Any ideas? Bet im missing something stupid.

Relevance 100%
Preferred Solution: lynksys ae1000 not digitally signed?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: lynksys ae1000 not digitally signed?

I switched to my laptop. Problem solved lol

1 more replies
Relevance 79.95%
Relevance 79.95%

I'm looking at my DirectX Diagnostic tool and it says for a few things
"The file ati2dvag.dll is not digitally signed" under Video, and "The file RtkHDAud.sys is not digitally signed" under sound 1 and 2. is this a serious problem? it might help solve why I've had a few crashes when playing games maybe? If anyone can help I will be very grateful, especially by telling me how to get these "signed"

My stats are
XP Home Edition (5.1 Build 2600)
1390 RAM 3.33 GHz
Radeon Xpress 200 series
 

Answer:Not Digitally signed?

I know very little about this kind of stuff but I think it just means it's a driver that hasn't been registered with Microsoft, or something along those lines. I don't believe it affects the operation of the thing.
 

1 more replies
Relevance 78.72%

Hi Guys, I did a search of my OS, and found some Drivers not digitally signed.Is that a problem,as my PC is functioning OK.Thanks for any advice.

Answer:Digitally Signed Drivers.

Hi D,
Your ok for the most part. A driver that lacks a valid digital signature, or that was altered after it was signed, can't be installed on x64-based versions of Windows. As a result, you will see this message ( Windows cannot install this driver ) if you are running an x64-based version of Windows.

The only other time (I think) may be if you updat a driver. again you may get that can't install it error. You can visit the device manufacturer's support website to obtain a digitally signed driver for your device.

5 more replies
Relevance 78.72%

I have had to reinstall Windows 7 64-bit edition, and when I go to install PCWizard or Everest Home Edition, I keep getting an error about drivers not being digitally signed, and Windows will not install them. Before I reinstalled Windows 7, I had both of these programs running just fine. Is there anyway I can change the fact that Windows 7 will let me install those drivers?

Answer:Digitally Signed Drivers?

The only way for 64 bit versions of Vista or Win7 to work without digitally signed drivers is to start them up using F8 to get teh Advanced Startup and disable the Digitally Signed Driver service.

If you had them working before did you make sure all your drivers now are current?

3 more replies
Relevance 78.72%

Most of you know by now I hope that Vista requires it's drivers to be digitally signed by Microsoft. Is there a way to bypass this when the final product is released or do you think MS will back down due to public rage?

More replies
Relevance 78.72%

How would I go about turning off the Warning message that comes up when you are installing device drivers that are not signed by Microsoft.

I have already found the reg value:

HKEY_CURRENT_USER\Software\Policies\Microsoft\Wind ows NT\Driver Signing

BehaviorOnFailedVerify = 0

Is there any other ways. I also have been told that the above method doesn't stop all of the pop-ups...does anyone know why?

-Aaron

Answer:Digitally Signed Drivers

right click on "my computer", click properties, select the hardware page, there is a button with "driver signing"

9 more replies
Relevance 78.72%

I tried to run sigverif.exe on XP professional edition and found there are over 2000+ system files not digitally signed. How do I get those systems files (i.e. *.dll, *.sys) digitally signed by Microsoft as signer?Angus

Answer:how to get Microsoft digitally signed?

WOW !!! My computer works, but now I should worry about unsigned files.Now is the time to throw computer out the windowhttp://www.computerhope.com/cgi-bin...What is sigverif.exe?

3 more replies
Relevance 78.72%

Hey guys can somebody please help me im trying to install a vodafone 3G modem on my HP Pavilion DV7 laptop but i cant it says driver not digitally signed. Im using windows 7 home premium 64 bit

Answer:driver not digitally signed

Hello Tokelo and welcome to the forums.

Your best bet is try this - Disable Driver Signing in Windows 7

I have not tried it myself but it may help.

Report back with your findings.

Lucky

1 more replies
Relevance 78.72%

The file aticfx64,aticfx64,aticfx64,amdxc64,aticfx32,aticfx32,aticfx32,amdxc32,atiumd64,atidxx64,atidxx64,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a,atitmm64 is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware
Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer I am using windows 10 with directX12 and I had to update my dedicated gpu cause I couldn't see the switchable graphics button ON ... and most of my usual games
witch I had played before now they were moving in slow motion very badly after I solved this problem with the official amdcatalyst software and drivers updated I get this annoying message on directx12 that says I need to get a WHQL logo driver ... any sollutions???
THANK YOU

More replies
Relevance 78.72%

Dear All,
A vendor website sporadically release's MSI's which are digitally signed (plugins to run the content). These are required for the website to function.
Users are more in number so we can't manually install the MSI and time is a constraint.
Packaging / Repackaging is not a quick solution
App-locker doesn't bypass UAC, AUTO IT didn't help, Manifest and shim are only for Exe's.
We are looking for a solution where in since these are digitally signed MSI's Users should be able to install them automatically without being asked for the credentials.
Regards,
C

More replies
Relevance 78.72%

Am trying to install HP Deskjet 630c printer and it keeps telling me this driver is not digitally signed. I just put Windows xp on the computer. What does this mean and can I get help? I am not very computer literate and any help would greatly appreciated. Many thanks Paula.

Answer:driver is not digitally signed

"Not digitally signed" means Microsoft have not tested this driver and verified it to be compatible with Win XP.  This does not mean it will not work, you should click on the "continue anyway" to install your print driver.  If this is a concern you should check the HP web site for newer driver tested by MS.Kim

1 more replies
Relevance 78.72%

Hi,

I'm trying to install XP Pro SP1 from a combined update file. After the update the log file says "not digitally signed and will not be replaced" on lots of the files. Is there a way to fix this problem?

Thanks,

Docfxit
 

More replies
Relevance 77.9%

Hello All,

We have an Excel spread sheet that contains macros, that is shared through out our company. We have issued our own certificate to go with this spread sheet.

We have a Windows 2000 Active Directory running in Native mode. We are trying to push this certificate to become a "trusted source" w/in MS office. Does anyone have any experience with this?

Thanks,

Adam
 

Answer:Digitally Signed Certficate Troubles.

Nobody has any experience w/ Digital Signatures?

(i spoke to MS and aparently they don't either. they said no one has tried this before.)
 

2 more replies
Relevance 77.9%

Hello,
first to apologize if there is such thread and it's in wrong section, I was unable to find it. My problem is: I have V560  model name: 20069, MO Number: WB xxxxxxxx, and I installed w7 x64 ultimate. When I'm installing drivers from dvd that I received in box, I got message: driver is not digitally signed.... It's happening when installing bluetooth, wireless, camera. (I'm installing proper drivers).
I also tried to dowload from web site, but also got this message.
Did any one had this kind of problem and how did you solved??
 
Thanks for help.
 
Mironso.
 
Moderator Note; s/n edited for member's own protection

Answer:V560 drivers for w7 x64 not digitally signed

Hi mironso,
 
Thanks for posting and welcome to the Lenovo Community,
 
I?d like to help you with your issue and I need to ask you the DVD which came with the machine does it have any stickers indicating for which windows version is it windows 7 32bit or 64bit ?
 
And please check the below links for the drivers from the website and let us know when you install them what happen and if you can see the same error message:
 
For the Bluetooth:
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS012335
 
For the Wireless:
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS011532
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS007871
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS012239
 
 
For the Camera:
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS008927
 
Hope the information helps. Let us know.
 
Regards
 

Soha






Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

2 more replies
Relevance 77.9%

G'day. I'm trying to install my old VisionPLus DVB-T card into a Windows 7 O/S box and it won't recognise any of the old drivers. When I try to install the TwinHan Digital tv software, Windows can't/ won't install them.

I've downloaded and tried the latest (DigitalTV 3.4 Build 19-02_20090212) and windows comes up with "Driver not found". I've tried to install in compatability mode but still no good.

When installing the above, it identifies my card as “PCI CX-87A with MCU DVB-S/-C/-T/ATSC card”.

Out of all the available drivers on Twinhan's site, which would be the best for my card?

Thanks
 

Answer:Driver not digitally signed so won't install

64bit Windows 7?

http://suffolk757.com/blog/2009/03/05/installing-unsigned-drivers-in-windows-7/

Out of all the available drivers on Twinhan's site, which would be the best for my card?
Click to expand...

The one written for Vista would be my choice, probably not one for W7 yet, may never be.

Looks like MS ha removed a way to disable unsigned drivers protection in Vista64, so probably is the same for 7
http://www.mydigitallife.info/2008/...-cause-drivers-not-found-in-64-bit-vista-x64/
The issue is known to affect PeerGuardian, TV tuner cards, Gigabit Ethernet adapters, CD/DVD-ROM/RW drives, and many other devices.Click to expand...

Looks like unsigned drivers are a no go for x64 Vista and Windows 7, well there are some workarounds in the article above, sounds like a hassle.
Not sure if this software will work with W7
http://www.tipandtrick.net/2008/per...iver-signature-signing-with-readydriver-plus/
 

3 more replies
Relevance 77.9%

Hey,

So I just upgrade to Vista x64 and 4GB of memory (courtesy of OCZ).

However, when installing the x64 version of MagicDisc/MagicISO I get the following error:

Can I get around this?
 

Answer:Required Digitally Signed Driver?

Uhmmm... yes, you can by pressing F8 at boot time and choosing to ignore the warnings about unsigned drivers, but you have to do it each and every time you boot. There is a way to permanently disable that driver signing requirement but I'm leery to give out the info anymore since it hosed a few people's machines recently.

It wasn't my fault that they chose to continue using shitty old drivers, but they blamed me for the mistake they made anyway.

Vista x64 is a more secure and stable OS than the 32 bit version, and that's one of the primary reasons why: the driver signing requirement. Disabling it or 'getting around it' will more than likely end up causing you issues at some point.

Google can find the specific method to disable the signing requirement permanently, or a search here might find it since it's been posted about 3 times over the past 4 months or so.

Good luck, either way...
 

5 more replies
Relevance 77.9%

OK GUYS HERE WE GO

I HAVE AN IBM R31 LAPTOP THINKPAD, EVERYTHING WAS WORKING
FINE YESTERDAY UNTIL I UPDATEDTHE DRIVERS FROM IBM.I DID NOT BACK
UP MY SYSTEM TO RETRIEVE MY OLD DRIVERS IN CASE A MISTAKE HAPPENED
TO ME, WHICH I REALLY REGRET DOING NOW. MY COMPUTER HAS A MATSHITA UJDA720 DVD/CDRW.WHEN CHECKING THE PROPERITES IN MY COMPUTER ON THE DRIVER IT COMES UP THAT THE FOLLOWING DRIVERS OR PARTS THEREOF ARE NOT WINDOWS DIGITALLY SIGNED #1- C:\WINDOWS\system32\drivers\cdrbsvsd.sys #2- C:WINDOWS\System32\DRIVERS\PxHelp20.sys. I WAS WONDERING IF THERE IS A WAY I CAN GO BACK TO MY OLD DRIVERS I HAD BEFORE WHICH WERE WORKING FINE OR IF THERE IS SOMEWHERE I CAN FINE THESE TWO FILES WHICH ARE DIGITALLY SIGNED BY WINDOWS AND HOW TO INSTALL SUCH.

NOT SURE IF I'M IN RIGHT FORUM OR NOT ANY HELP WOULD BE GREATLLY
APPRECIATED.I AM RUNNING WINDOWS XP HOME

THANKS ALOT
 

Answer:Windows Drivers Digitally Signed

The fact that the drivers are not certified by Microsoft merely means that the vendor did not submit them for testing and pay the bill to do so.

Many perfectly good drivers are not certified -- so do not worry about that unless you actually have problems with the hardware.

Having said that there are two ways you can restore the old drivers in XP. One is to go to the Device in question in the Device Manager, open its properties dialog (double click it) and select "rollback driver" on the driver tab. Windows XP backs these up automatically when you make a change.

The second is to use System Restore to return to a prior date.
 

1 more replies
Relevance 77.9%

I am trying to use my recovery disks after installing a new hard drive. I keep getting these messages saying my drivers aren't digitally signed. Not sure how to fix this! Maybe corrupted recovery disks?

Answer:Digitally Signed Drivers with Recovery

hi again not sure if this will help you http://www.jablotron.com/upload/down...dows7Vista.pdf

9 more replies
Relevance 77.9%

I have NVIDIA GeForce 8800 GT with which I have had some driver issues. While checking the Driver details in Device Manager I noticed that some Driver files are not digitally signed. These are: C:\Windows\System32\nvcpl.cplC:\Windows\System32\nvcplui.exeC:\Windows\System32\nvcpluir.dllC:\Windows\System32\nvexpbar.dllCould this be causing problems with my drivers?

Answer:Driver files not digitally signed

It is my view that you should always download drivers form the Manufacturers website. To update your current drivers go hereclick here

3 more replies
Relevance 77.9%

Just as the title says, i got this game Tomb Raider - Underworld that wont work properly. I installed the game and the game starts but once it starts it crashes and i get a error. I reported the problem to the games manufacture and they said this =

We apologize for having difficulty with our game. Your system does meet the minimum requirements to play this game.
Unfortunately the problem is that your drivers are not digitally signed. In order for us to forward your information
we will need you to update your drivers. After you have updated the drivers please send up an updated DXDiag report
and we will forward your information to our product development team.

My PC is costumed built so i really can't contact a PC manufacture.
Can you help me?
 

Answer:How to make your drivers digitally signed?

13 more replies
Relevance 77.9%

I'am having problems with viatech usb 2.0 drivers on win xp home edition. They're not digitally signed for one and these are the drivers they sent me with my asus a7v333 motherboard which is designed for amd xp processors and windows xp!! I cant find anything on asus's site or viatechs site about drivers for xp and my computer is hanging up alot and everytime I try to shut down I get the debuglog.dll end program message. also Ive been having problems playing games online which Im not sure if its the usb drivers causing it but I thought it might be since I have dsl and the modem plugs into the usb port. Any help would be greatly appreciated.
 

Answer:Viatech Usb 2.0 Drivers Not Digitally Signed???

Hi there!

If XP says they're not signed...just install them anyway! XP just implemented USB 2.0 in SP-1.

When you get that message...just click "Continue Anyway" and load them up!

They should work fine!
 

1 more replies
Relevance 77.9%

Good evening,

I just reinstalled XP on a friends machine that was pooched. It is a Dell DIM4400. Everything is working except for the sound card. It is a built in sound card. When the computer boots up the new hardware wizard comes up asking for a driver for a realtek AC97 Audio device. I have tried everything I can to install the driver but each time I try I get an error that the driver is not digitally signed and it won't install. If I try in safe mode it installs but I get a blue screen upon startup and have to reboot. I do not have the orignial Dell cd but I have tried every driver from the Dell site that should work on this model of computer. I have updated the chip set drivers on the motherboard etc. I just can't get this sound card to work. Any advice??
 

More replies
Relevance 77.08%

is it necessary to sign driver in win xp 32 sp2.

when i google i got that it is necessary for win vista , win7 and other upper version.

Answer:windows require a digitally signed driver xp 32 sp2

A signed driver is not necessary in Windows. It is an extra security layer, as drivers can become corrupt by malware. If you obtained the driver from a trusted source (like the device manufacturer's website), you can go ahead and tell Windows to install it.

3 more replies
Relevance 77.08%

I have a macro in a .doc file developed in word 2002.
It runs OK with security settings "Run All" or "Ask before run", but if I sign the file with a certificate that I made myself (with SELFCERT.EXE), change the setting to "only run signed macros" the doc file will open without warnings, but the macro won´t run.
What is missing?
With regards
/David
 

More replies
Relevance 77.08%
Answer:Digitally signed printer drivers with windows XP

I have a home network. All my machines were running Windows ME. I have an HP Deskjet895Cxi printer attached to one of the machines. I could print to the printer from any machine. Now I have a new machine running Windows XP and the printer is attached to this machine. I can print OK from the XP machine but none of the other ME machines can. I see in the printer properties that I can add a printer driver for ME but every time I try this (using the latest ME driver from HP)I get the message that the driver is not digitally signed and the driver is not loaded. How do I get a digitally signed driver for my printer?Alan

4 more replies
Relevance 77.08%

I've been having problems with BSODs (0x09F - happens before sleep mode, or during and 0x0E6 - which happens while I use the computer; it seems to happen when I'm downloading and/or installing anything) so I ran File Signature Verification, and rtnicprop64.dll came up as the only file not digitally signed, and 2 more files weren't scanned. Is there anything I can do?

Answer:Diver Verification: rtnicprop64.dll not digitally signed

hi follow this : BSOD posting instrucs: http://www.sevenforums.com/crashes-d...tructions.html
so someone can hopefully help you, even perhaps me.

4 more replies
Relevance 77.08%

From what I know if these progams are running and they aren't digitally signed then they are most likely a form of a virus. I can manually find the official conhost.exe from windows/system32 and run it, that creates a separate instance of it running, making two, the official and the supposed virus. Neither of the supposed virus executables do not open any properties when I right click and select properties from the task manager, which is another red flag. I ran a fully updated malwarebytes scan and an avast scan outside of windows and had no returns of an infection. I could not find the location of the virus executables and I am looking for some help. Thanks.
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64 
Internet Explorer: 11.0.9600.16428  BrowserJavaVersion: 10.45.2
Run by OJoe at 14:19:41 on 2014-01-10
Microsoft Windows 7 Professional   6.1.7601.1.1252.1.1033.18.16333.12327 [GMT -5:00]
.
AV: avast! Antivirus *Enabled/Updated* {2B2D1395-420B-D5C9-657E-930FE358FC3C}
SP: avast! Antivirus *Enabled/Updated* {904CF271-6431-DA47-5FCE-A87D98DFB681}
SP: Windows Defender *Enabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.
============== Running Processes ===============
.
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\nvvsvc.exe
C:\Program Files (x86)\NVIDIA Corporation\3D Vision\nvSCPAPISvr.exe
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System... Read more

Answer:conhost.exe and csrss.exe not digitally signed virus

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/520358 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

9 more replies
Relevance 77.08%

Bought a Clicksmart 310 Logitech cam for my new xp Toshiba, Satellite model. When I try to install, pop-up says the cam is not digitally signed and it may harm my hardware either now or in the future. This is the 2nd cam I bought and got the same message on the first one. Please help me. [email protected]
 

Answer:Webcam not digitally signed. The Box says it is xp compatible, but a warning pop-up.

This means that Microsoft has not certified the drivers themselves. If logitech is telling you it works in XP that means they have tested it. Make sure you are installing the latest drivers for the camera.
 

1 more replies
Relevance 77.08%

Hi

The last few times I started my computer, the system comes with the warning:

"Windows requires a digitally signed driver
Driver: Broadcom NetDetect Driver
Service: BASFND
Publisher: Broadcom Corporation
Location: C:\Program Files\Bra...\BASFND.sys"

Windows suggests to uninstall the program or device that uses this driver and check the publishers support site to get a digitally signed driver.

The problem is that I have no idea of which program or hardware is using this driver. All the drivers I have installed in my computer are from the computer manufacturer.
I have also been at Broadcoms homepage and there is plenty of things to download there. But I dont want to ruin anything.

Suggestions on what to do?

System: Windows Vista 64
 

Answer:Windows requires a digitally signed driver

Broadcom is your onboard ethernet, I don't see why it would suddenly complain unless there was an update.:confused You can disable driver signing but it only cures the symptom and not the cause.
 

2 more replies
Relevance 77.08%

I'm trying to install a program, but I says I can't install an unsigned driver.






Quote:
Driver: CPU Core Temperature Monitor
Service: Logitech CPU Core Tempurature (not a typo)


I've tried Disable Driver Signature Enforcement in my bios, and DDISABLE_INTEGRITY_CHECKS in cmd.

Neither works.

Answer:Need to bypass digitally signed driver requirement.

Go to Start Menu > Run and type the following command: bcdedit /set nointegritychecks ON
Restart the PC and install the unsigned driver
After installation go to Start Menu > Run and type the following command: bcdedit /set nointegritychecks OFF
Restart your PC

4 more replies
Relevance 77.08%

Um... So how do I remove/disable this stupid "feature" that only allows digitally signed drivers to be installed?
Most the drivers for my hardware is third party with no "proper" signed drivers.
 

Answer:Vista x64 forces digitally signed drivers?

Whenever i run across a non-digital signed driver i just get prompted. Its done that since XP SP2 i believe
 

22 more replies
Relevance 77.08%

Why is everyone saying Vista 64-bit won't install unsigned drivers? I installed the latest beta driver from nvidia and Vista warned that it was unsigned but gave me an option to install anyway.

Am I missing something/misinterpretting this or was this only the case in the Beta/RC verisons of Vista and everyone keeps bringing it up (kind of like requiring UAC for changing backgrounds; people still say Vista does it)?
 

Answer:Digitally signed drivers required under Vista 64-bit?

Short answer: The effects of FUD.

Long answer: The truth is, it was never stated on any official documents that Vista wouldn't accept unsigned drivers. The real mechanism is how Vista handles such drivers, in that the permission level changes, but that's such a 'behind the scenes' object that some ppl though it cooler to just say, "NOEZ, the sky is falling!".
 

6 more replies
Relevance 77.08%

Hello everyone,

I am trying to install windows and I have a MSI 890FXA-GD70 [product page] that is setup with a functioning RAID 0 configuration. My issue is when I get to the step where you select your hard drive, it doesn't show up.

So I click "Load Drivers" and select the x64 raid driver I got from MSI. It shows up, then I click next and then the error message comes up: "To continue installation, use the Load Driver option to install 32-bit and signed 64-bit drivers....etc"

I restarted and spammed f8 to get into advance startup options. I selected "Disable digital driver signing"

However that did not fix the problem.

Does anyone have any tips or a solution?

Answer:Digitally Signed Raid Drivers bypass [MSI, x64]

I have rt seven lite, I was going to load a custom registry file but my laptop has 7 home so no gpedit.msc

1 more replies
Relevance 77.08%

I cannot use the CD drive on my Laptop, the device manager shows the a yellow triangle with an exclamation mark in it. I have updated the driver but it still wont load and I get the following message from the device manager: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39).

Any suggestions as to how to fix the problem?

Answer:CD drive of Satellite Pro A200 is not digitally signed?

Did you tried to remove the drive in the device manager?? That helps sometimes, because windows reinstalls in the most cases the previously removed (deleted) hardware.

Since when does the problem occur that your drive cannot be recognized?

Greeets

3 more replies
Relevance 77.08%

Hi all,

please can someone help me.....

I am trying to install my Adaptec 1430SA controller card, for use with Win7 64bit, i have been trying for hours !

I have now got as far as windows seeing the right driver for the card, but windows refusing the driver because it is not digitally signed... i have downloaded the correct driver from adpatec.com ensuring it was the driver for use with win7 64 bit...

i dont know what i should do now, ive tried booting from an ms dos diskette and loading the drivers that way, but nothing seems to work....

PLEASE HELP ME !!!

Answer:HELP! Driver is NOT digitally signed for Adaptec 1430SA

Hi press F8 when windows is starting and you can deactivate it for the time you are on, alas you have to do
it each time you reboot. Have to go will try help later.

4 more replies
Relevance 77.08%

downloaded samsung magician and installed it. it started up and apparently i need some sort of digitally signed driver now?

"program compatibility assistant"

"samsung magician application resource
samsung india software operations

windows blocked installation of a digitally unsigned driver. uninstall the program that uses the driver, and control releasers website to get a signed version of the driver"

Answer:samsung magician need digitally signed driver

You don't need Magician for the drive to work just fine. You may not get all the advanced features, but the drive will be plenty fast.

1 more replies
Relevance 77.08%

Trying to create a silent install package for the latest 32 bit video drivers (83d527ww.exe) and cannot because the drivers aren't digitally signed so you have to manually install them.  Is there a way to get the older driver Version 8.15.10.2321 which does not have this issue?













Solved!

Go to Solution.

Answer:X220 Video Drivers not digitally signed

I had to uninstall and delete the older ones. Then I could install it

6 more replies
Relevance 77.08%

They say too much knowledge can be a dangerous thing. I'm probably living proof of that.. someone told me how to run a Microsoft diagnostic that shows which system files do not contain digital signatures. According to the scan, 35 of my files are suspect. Should I be concerned about this? I religiously scan for viruses, spyware and rootkits using three different apps for each. Everything is supposed to be okay. Here is the list of unsigned system files:

Microsoft Signature Verification

Log file generated on 8/18/2007 at 4:27 PM
OS Platform: Windows XP Service Pack 2
Scan Results: Unsigned: 35

File Modified Version
--------------- --------- -----------
dxmasf.dll 8/22/2006 6.4.9.1133
mfc40u.dll 11/1/2006 4.1.0.6141
mxdwdrv.dll 3/22/2007 0.3.6000.0
mxdwdui.dll 3/22/2007 0.3.6000.16438
mxdwdui.gpd 8/31/2006 None
mxdwdui.ini 4/21/2006 None
nv4_disp.dll 4/19/2007 6.14.10.9424
nv4_mini.sys 4/19/2007 6.14.10.9424
nvapi.dll 4/19/2007 6.14.10.9424
nvcpl.hlp 4/19/2007 None
nvcod.dll 4/19/2007 1.0.0.35
nvcodins.dll 4/19/2007 1.0.0.35
nvcpl.dll 4/19/2007 6.14.10.9... Read more

Answer:[SOLVED] System Files Not Digitally Signed

Hi TomGab and welcome to TSf !

You don't have to worry about system files that are not digitally signed, it only means microsoft hasn't run extensive tests on them. The file owner (nvidia for most of your nvxxx.dll files for instance) will have tested them to make sure they would work fine with XP so you shouldn't have any problem.

4 more replies
Relevance 77.08%

help !!!! i was uninstalling what i thought were unimportant stuff & accidentaly uninstalled my sound manager can anyone tell me where i can find a Windows XP digitally signed Realtek AC?97 driver

Answer:help i need a Windows XP digitally signed Realtek AC’97 driver

Hi mate,
check what make/model is your Motherboard, visit manufacturers web site and download sound driver for that type of Motherboard...

2 more replies
Relevance 77.08%

I recently purchased a new pc that came with win vista 64 bit premium home installed. I am now reloading all my old programs and I keep getting ?windows requires a digitally signed driver" error message. I also can't seem to play my old movie files, all of which played fine when I had Win XP. Apparently Vista does not want me to make my own decisions, so I am wondering how I might go about disabling all this extra secure vista crap. Can I go into Control panel and disable the BitLocker Drive Encryption? Or do I need uninstall 64bit and install the Vista 32 bit? Would that be a smooth transition? Would all my stuff work again if I had the less securitized 32bit Vista? Thanks for any help you may provide.
Regards,
William

Answer:windows requires digitally signed driver

Welcome to the Vista forums

1) You don't want to disable UAC (User Account Control) as it does a lot to protect your computer from various malware. If you really feel the urge to turn it off, then you can in control panel in the User Account section. Once turned off, you'll get the red shield in the bottom right saying it's disabled. Disable security warnings by opening security centre and going to "change how security centre warns me" or something and choose the "no warnings" option.

2) Just download the Vista codec pack (just Google it and you should find it) and DivX and you should have no problems watching videos.

3) You can install unsigned drivers on Vista 64 bit, do this by running an elevated command prompt (right click on command prompt in Start menu and click "run as administrator".

Type this and press enter bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS

When you reboot, you should be able to install unsigned drivers.
Also, I looked on the HP website for your computer, and it has 6GB RAM, so going to Vista 32bit would only allow you to use about 3.5GB RAM. I also saw it only has an Nvidia 6150e onboard graphic card. Are you using this? As if you upgraded this to a graphic card, you'd notice better performance on Vista as well.

2 more replies
Relevance 77.08%

downloaded samsung magician and installed it. it started up and apparently i need some sort of digitally signed driver now?

"program compatibility assistant"

"samsung magician application resource
samsung india software operations

windows blocked installation of a digitally unsigned driver. uninstall the program that uses the driver, and control releasers website to get a signed version of the driver"

Answer:samsung magician need digitally signed driver

You don't need Magician for the drive to work just fine. You may not get all the advanced features, but the drive will be plenty fast.

9 more replies
Relevance 77.08%

Hi all, hoping this is the right subforum

I built a HTPC a few years ago and it had suited my needs fine. Relevant parts used are:
i3-3225 CPU,Scythe Big Shuriken 2 RevB,Asus P8-H77 Pro,2 x 4GB G.Skill Ares DDR3 1600 RAM,Samsung 830 Series 64Gb SSD (OS HDD),WD Cavier Green 2TB (Media HDD),

I tried to upgrade to Windows 10 but kept receiving errors, such as the partition was not GPT (0xc000021a). The one error that happens every time I tried to upgrade or install Windows 10 was winload.exe was not digitally signed. I wiped the drive, reformatted it as NTFS, converted to GPT and installed W10 from blank and still had the same winload.exe error. Right now I have put W7 Ultimate 64bit back on and am installing all the windows updates.

My question is, does anyone know why I keep get a winload.exe not digitally signed error? I have downloaded the W10 upgrade files numerous times, redownloaded the media creation tool, set clean boot, even tried downloading the upgrade and creating a usb drive with it from a different PC but same error.

Is there perhaps some upgrades that I should make my HTPC?

Answer:W7 Upgrade error - winload.exe is not digitally signed

Try turning secure boot off in bios.

5 more replies
Relevance 76.26%

Windows Vista x64 decided to implement a 'security measure' by which all drivers must be 'digitally signed' to be allowed to install and run. I have a program which is compatible with Vista and x64 bit operating systems, however as its drivers are not digitally signed I cannot run it correctly - I recieve the message 'Windows requires a digitally signed driver' and access to the driver is blocked.

Is there a method of bypassing this?

Answer:'Windows requires a digitally signed driver' - How can I bypass this?

When you boot your system hit F8 and you can bypass it there. You will have to do this every boot. There are a couple applications out there that will do this for you but the names escape me right now.

4 more replies
Relevance 76.26%

Someone else had this issue but their thread was closed with no answer posted on the forum. I have recently upgraded to Outlook 2010 from Outlook 2000. I am running Windows XP SP3. I am familiar with the proper way to exchange digitally signed and encrypted emails and have done it for a long time and it always worked fine on Outlook 2000. Since upgrading to Outlook 2010, I get no error message and neither do the recipients of my emails, however, the emails that I receive have no text in the body of the emails. I If the email is only signed and not encrypted, I can read the body of the email on my blackberry though, therefore, I know the text is there. If on my computer (and therefore on my outlook 2010) the body is blank. An encrypted email is unreadable on my blackberry.

I am NOT running Outlook Exchange and that is the only information I can find on the web. It is too bad that the other gentleman asking the same question in January 2011 did not post the solution to his problem on this forum, or maybe he never got a solution? Hope someone can help me. Thanks-
 

More replies
Relevance 76.26%

Does anyone have a concise explanation for this? Thanks for any info!

(just the digital signing (signature), not encrypting the file.)
 

Answer:Solved: How is data rendered unforgeable after its digitally signed?

If I remember correctly, it's has like a code, so it will know who is legit and whos not.
 

3 more replies
Relevance 76.26%

hi

i have problem with some of the messages received from out of my organisation.When i try to open

these messages in outlook 2003, it is showing a error message"Can't open this item. Your Digital ID

name can not be found by the underlying security system.". But this is not the case if i open the

message using Outlook Web Access.

Can any body help me in this regard.
Thanks
 

More replies
Relevance 76.26%

I have x220 with Windows 7 Pro 64 bit. Device manager shows under Storage Controllers "Ricoh PCIe SDXC/MMC host controller," but there is a yellow triangle with "!" and a Device Status Code 52 message "Windows cannot verify the digital signature for the drivers required for this device." I checked in C:\Drivers\WIN\Multicard and found two *.cat files--which, I understand, are required to confirm digital signature. Each of them (ridisk.cat and risdxc.cat) has a signed and valid certificate! So what is going on? Will the card reader work? Is there something wrong with how Windows 7 is treating the Ricoh driver, which I downloaded from the Lenovo site? Why should I be getting this grief?













Solved!

Go to Solution.

Answer:Ricoh card reader driver-not digitally signed?

Hello,
 
Perhaps the driver is damaged?
 
Try deleting the Ricoh PCIe SDXC/MMC host controller from the Device Manager and then restarting the computer in order to let the Device Manager re-detect it and re-install the device drivers.  Does that solve the problem?
 
Regards,
 
Aryeh Goretsky
 

5 more replies
Relevance 76.26%

Hello,
I'm at my wits end. Anyone who can help would be my hero.

Acer 5253 laptop, Win7 Home Premium 64bit SP1, AMD C-50.

Trying to use a USB mouse. I have 3 logitech mice. None work because hidclass.sys and hidusb.sys are not digitally signed. If I f8 and disable driver signing enforcement, all 3 mice work, so I'm pretty certain that's the issue.

Tried "Update Driver" via device manager. Windows determined that I already had the best driver and wouldn't do anything.

Logitech does not furnish drivers for Win7. They rely on the native drivers.

Acer does not furnish mouse drivers. They refer you to the manufacturer of the mouse.

Tried copying the files in question from a 64bit machine that showed them to be digitally signed. Renamed the ones on my machine and pasted the ones from the "good" machine. Resolved nothing.

chkdsk /r found problems and repaired them. Didn't help.

sfc /scannow found problems that it could not resolve. Looked in CBS.log and found no references to either of the sys files in question. No resolution.

System Restore only had one restore point, and it was from 2 days ago. Problem was already noticed by then. I suspect that it's been this way since I purchased the laptop a couple of months ago anyway, but if there had been a restore point back at the very beginning, I'd have tried that.

I don't know much about digital signing of drivers. I've seen in a couple of threads that I might be able to sign the drivers myself, ... Read more

Answer:Windows mouse driver files not digitally signed

Mike

Obviously many more problems than just the mouse driver.

You can use earlier drivers (ie from vista, or even XP) if you install them in compatibility mode
[right click the installer>properties>compatibility>chose OS]

The other system problems need a repair install.

4 more replies
Relevance 76.26%

Hi all, Following device:ThinkPad E531Graphics: Intel HD 4000System: Win7 Pro Following problem:1) Approx. 2 month ago a windows update caused a problem with the hdmi at my laptop. There was no connection to the TV possible anymore (I tried the TV, the cable and the hdmi device already).2) I installed a new driver (origin: Lenovo support page). Result: Windows messages that the driver is not digitally signed...Hence, the device "vga save" was set. What I've already tried, everything as admin:1) look for older drivers: Got only one and it didn't work2) Tried to install a driver directly from Intel: Didn't work3) Tried to disable the signing (GPEdit.msc -  code signature ...). Here I had the problem that I even have no line with the code signature to set the ignore property4) Tried to install the drivers (Intel and Lenovo) in the testmode. The waring message about unsigned drivers came5) Tried to create a certificate. Here the cmd said the command is not known.6) Tried to install the drivers (Intel and Lenovo) after setting the "TESTSIGNING" off (BCDEdit). The waring message about unsigned drivers came My question:Any ideas or similar experiences?I can not believe that the Lenovo or Intel drivers are not signed. But why Windows does not accept them?Is the available update to Win10 an option? Generally: Failure F40 (the failure is 40 cm in front of the monitor) is not excluded  Thank you very much in advance.Regards,Stefan 

More replies
Relevance 76.26%

I'm really getting tired of having to f8 every time I boot up to game to turn off digitally signed drivers so I can use rivatuner. This is BS and I would really like to disable this permanently.

Help is VERY much appreciated!

Thanks in advance
 

Answer:How can I permanently force digitally signed drivers OFF in vista 64?

Remove updates KB938979 and KB938194
Command line / run as administrator
type: bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS
restart PC
 

11 more replies
Relevance 75.44%

Hi.I am having a Z580 (Windows 7 65 bit home premium) laptop.Recently I am experincing many problems with my wireless adapter.After a few seconds of switching on, wireless symbol will show "Limited Access". I will try troubleshooting, but the system will hang and i have to force it to shutdown.So I have un-installed the wireless driver and re-installed it. But now the same "Limited Access" happens and when i troubelshoot, (Reseting wireless adapter) the adapter goes off and it is shown that "Adapter is experiencing driver or hardware related problems". When i looked into device manager it is shown that ""This device cannot start .Code10"". Also when i checked the details, it is showing that "'the driver is not digitally signed"".Please help me solve this issue asap.

Answer:Wireless Adapter is not working (Code 10) "Driver is not digitally signed"

Update : If i put laptop in sleep after wireless becomes "Limited access"  after 10-15 mins if i reopen it, wifi is connected normally and it works! but for a period less than 10 mins.. After that again "Limited access" is coming and nothing will load!!! it is becoming a serious issue plz help

1 more replies
Relevance 75.44%

This is more of a bug report rather than a question.


When installing the latest version of Message Analyzer 1.4 (Build 4.0.8110.0) on a clean installation of Windows 10 Pro (Build 14393.222), it shows an error saying 'A Digitally Signed Driver Is Required' Message Analyzer -- WFP Callout Driver.
I'm guessing maybe due to the new driver signing requirements in Windows 10 1607 Anniversary Update...
https://blogs.msdn.microsoft.com/windows_hardware_certification/2016/07/26/driver-signing-changes-in-windows-10-version-1607/

More replies
Relevance 75.44%

Hello,

I Recently upgraded several XP sp3 workstations from Outlook 2000 to 2010. When receiving an email with a digital certificate from a existing sender the contents of the email are blank but also get no certificate error messages. Email correspondence before with Outlook 2000 on same PCs was fine. Any help in this matter will be much appreciated.
Thanks,
Karl
 

More replies
Relevance 74.62%

When I downloaded/installed Everest Home Edition I got and error message shown in the attached image although Everest seems to work fine. How do I make Vista accept non-digitally signed drivers that I trust?This is on my HP 6715b in specs, Vista Business x64[regaining space - attachment deleted by admin]

Answer:Everest Home Edition download. Message = driver not digitally signed

To be on the safe side, reckon the download was ruined by some kind of malicious software. Perhaps on your system.Ask a friend to download it and see if he gets the same thing.EDIT:Just did download from the majorgeeks. Works on both XP and Vista. Scanned with Avast and no threat found.You have malware. Or a bad download.

8 more replies
Relevance 73.8%

Hi all,
I am wondering how do I digitally sign my driver so that it can be installed on a Win7 Ultimate SP1 in a VMWare virtual machine. I have used Visual Studio 2013 to sign my driver and cat files using a certificate I obtained from GlobalSign. Both of these
files passed the signtool check, but when trying to install in this virtual machine it generates an error code 52.
Thanks in advance for any help

More replies
Relevance 72.57%

This driver (or part of it) is not digitally signed, hence during silent install in SCCM TS Windows 7 x64 it will "hang" waiting to accept the unsigned driver (NOT during Apply drivers, but Sequence that runs setup.exe - I install ALL graphics drivers this way!)

http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=D4HM1
Had top revert to previous version
Intel HD, 5300, 5500, 6000, 515, 520, 530, P530, Iris 540 Graphics Driver, 20.19.15.4390, A05
to be able to do silent install!
Somebody else might have noticed?
Seb

More replies
Relevance 68.47%

Hello everyone.

Recently I kept getting this popup saying *A digitally signed driver is required*

How do I find out what program is using this unsigned driver to remove this popup?

Answer:How to solve "digitally signed driver is required"

Any warnings in Device Manager ?

more replies
Relevance 68.47%

Hello everyone.

Recently I kept getting this popup saying *A digitally signed driver is required*

How do I find out what program is using this unsigned driver to remove this popup?

Answer:How to solve "digitally signed driver is required"

Any warnings in Device Manager ?

0 more replies
Relevance 55.35%

I?m trying to install a wireless adaptor (no disk) on my old computer and XP can?t find the driver. I downloaded it from Linksys, but still no go. See SS... well I was going to upload a SS, but the site is telling me the file is too large (164K too large?)... go figure... Anyway, I'd appreciate any info. Thanks.

Answer:AE1000 driver problem

What is the model # of the Linksys Adapter? I don't know what you mean by SS? If you are trying to attach a file to TSF, be sure it is a supported file type, you can also Zip it and attach it.

2 more replies
Relevance 54.12%

I got this wireless Linksys ae1000 adapter about 3 weeks ago on amazon and it worked fine for 2 weeks by connecting to the Internet and it had excellent connection then it stopped detecting my network. I tried updating it with the Cd and it said it was up to date. The computer is a Compaq presario and is about 14 years old. I looked in device manager and there were no ?s or !s in adapters. Please help!
 

Answer:Wireless Linksys ae1000 adapter not connecting!

9 more replies
Relevance 53.3%

OneDrive on my laptop is showing that I am not signed in. I have verified that I am signed into my Microsoft account, and I can access OneDrive online and on my phone.

Answer:Why is OneDrive on my laptop showing as not signed in when I am signed in on all other devices?

I'm not 100% sure, but I believe you might have to sign in separately on your laptop for it.

1 more replies
Relevance 45.92%
Question: lynksys

how do i open ports on a linksysy router
 

Answer:lynksys

http://portforward.com/

Find your router model and use this website.
 

1 more replies
Relevance 45.51%

due to having to do a system recovery ,on a computer running xp home, edition, iv,e lost all internet conection thro router. ive got a blue ethernet cable connected from the router to the computer,and a cable from the modem to the router, it works fine directly from modem , ive got the lynksys instructions, but there website gives no helpline # only an e-mail ansering service. ithink setting up one of these routers skould have a health warning are ther any good tutoials out there

Answer:lynksys disconected

click heretry this link

3 more replies
Relevance 45.51%
Question: Lynksys wireless

Hi all, new to the boards

Is there anyone that is familiar with the Lynksys wireless connection. I had hooked up my computer with this a few months ago, and now my laptop will not get on the internet. Outside of calling for 4 hours is there a quick way to check the problem? Thanks

Tim
 

Answer:Lynksys wireless

Yeah.. Basically you apply the Quick Solution.

That's pretty much the best answer you get to your question containing zero (useful) information.

What hardware do you have? Computer, all networking gear.
What software do you have? Operating systems, networking software.

What happened? What do you want to ahieve? How does it fail? What have you done so far?
 

1 more replies
Relevance 45.51%

I just re-installed windows 98se and can't seem to get the wireless linksys configured to work. Drivers are all installed etc, but can't find the ppp or similar panel. Where to look?

All help appreciated,

Thanks
 

Answer:can anyone help config lynksys?

One thing to do is download the manual from linksys for your router... http://www.linksys.com/download/


or if its the setup page then open an IE or other browser window and type in the Address bar this .... http://192.168.1.1 > click GO and then a user name and password box will show, enter your info and then the setup page will appear
 

3 more replies
Relevance 45.51%
Question: lynksys wireless

Hi everyone ~ I have a Linksys wireless connection and I also have a neighbor that is getting free internet access from her laptop from me. How do i put a security pasword on it?
 

Answer:lynksys wireless

9 more replies
Relevance 45.51%
Question: Lynksys Router

I have the Lynksys router and everything works fine until i wanna set-up an FTP site than i have no access through the router even if i assign a port, now when i disconnect the router and just go straight cable i get no connection........help would be aprreciated

Answer:Lynksys Router

The informaiton in the manual for the linksys is not nearly enough to tell you how to open a computer to the internet through port forwarding, there is alot you have to know. The reason you cannot connect without your router hooked up is because your ISP is attached to the MAC address on your router, you have to call them and tell them to change it.

2 more replies
Relevance 45.1%

Hi all,

Just set up the lynksys/dsl router (WIRED), nected to the router I have an XP machine and a 98se machine. The XP machine works great super fast internet speeds, the 98 machine loads web pages very very slow. Without the router, the 98 machine runs superfast.
I believe the cause of the latency has something to do with the router, I have all proxy settings off on my 98 machine. Any other ideas as to what the cause of the slow bandwidth may be?

BTW, I have Cable internet access.
 

Answer:Lynksys cable/dsl router help

This is my standard answer to most networking problems, check that your PCs are setup correspondingly. It is generally faster to use fixed IPs rather than DHCP handing them out. That might be the cause of your delay.
Make sure ICS is not switched on on that W98 PC.

A few basic setups when networking:

Router-setup WAN:
Protocol: Fixed IP
IP-address, Subnetmask and default Gateway: as per ISP-information
DNS-servers: as per ISP-information
Enable NAT

Router-setup LAN:
IP-address: set to e.g. 192.168.1.254 (or use default)
Subnetmask: 255.255.255.0
DHCP-server: disable

Router: Some System-settings (depending on your router)
Optional SNTP (time): e.g. 194.35.252.7 for UK/Ireland (GMT)
uPnP: disable
Dynamic routing: disable
Remote config: disable
Dynamic DNS: disable
Firewall: Block hacker attack: enable
Firewall: Block WAN request: enable
VPN: disable all settings unless you need it

PC-Settings
Internet Protocol (TCP/IP)
Use the following IP address: 192.168.1.101 (102, 103 etc.)
Subnetmask: 255.255.255.0
Default Gateway: 192.168.1.254 (IP-address from your Router)
Use DNS Server address: 192.168.1.254 (IP-address from your Router)
Second DNS: leave blank or put in first DNS-server from WAN-part in Router

Enable File/Printer sharing if you wish (works only within local network)
Check individual printer(s) that they are shared as well (in printer-settings)

And make sure all your PCs are in the same WORKGROUP.

If software firewall i... Read more

2 more replies
Relevance 45.1%

I have a 4 port lynksys router that I have been using for several months with 2 pc's connected. I have added a 3rd pc, I get a network connection icon, the router port LED is illuminated at the router, but I can't connect or even ping the router. Any ideas?

Answer:lynksys router problem

If your router is set up for DHCP and your new computer has a Static IP address- this may be the culprit. Try;

Control panel>network and internet connections>network connections

right click on local area conection and then click on properties

click on Internet Protocol (TCP/IP)- Is the box checked "Optain and IP address automatically"? If not- check this box. Click ok and then cancel out of the control panel and try again.

If this doesent work- try;

follow the steps above and get to local area connection and click on it once just to highlight it. On the left hand side find the wrench icon next to "Repair this connection". Click on it and let it do its thing. Once done- cancel out of control panel and try again.

Hope that helps.

Andy

4 more replies
Relevance 45.1%

hello all! hope this is the correct forum....
we have comcast cable internet with a lynksys wireless router.
well, like 6 times/day we have to restart the wireless stuff. it always says things like "strength: excellent connectivity: low or worse yet, no connectivity-
we keep having to click repair connection, or physically shut it off and power back up.
why is it so bad?
often times we have to connect through someone else's wireless, belkan 54G.
i've got an hp noteboook with built in wireless and my hubby has a gateway with a wireless card inserted. he has slightly less trouble than me.
any ideas on why it sucks so bad?
thanks
love~
frustrated in venice, aka chad-roscoe
 

Answer:wireless problems lynksys

Hi--
I'm not really sure if the IPs are statically assigned or not, unfortunately. The default IP appears to be the same on both of our laptops. I know that, at times, it's routine to clear out the reserve on the Linksys router, but the connectivity issues occur several times daily, often while we are logged on (ie, we don't have to log off and then log back in to experience the problem). Linksys. The router seems to be able to pick up signals--we generally get 2 or more wireless connectivity options. But it seems that something isn't quite right, as our own connection (Comcast) seems to drop off and on even though our router is only about 15 feet away from our laptops.
Any help or suggestions will be greatly appreciated as this has become a daily source of frustration in our lives.
Thanks--
chad-roscoe
 

4 more replies
Relevance 45.1%

Hey guys do any of your know how to set up and ftp with a lynksys router... i cant seem to do it =-/ how do i get the machine i want to serve as an ftp out of the routers "protecting net"?... I am using Serv-U for the ftp server....
 

Answer:How do i set up and ftp server with a Lynksys router :(?

you should just be able to setup a port forwarding for the program. under advanced, forwarding i believe.
 

10 more replies
Relevance 45.1%

I bought a new adapter and want to uninstall my Lynksys software on my computer, however whenever I try to uninstall, an alert pops up that says:

"The system cannot find the file specified"

I've tried manually going into my C drive and then program files to delete it, no good. I've tried using the Windows uninstaller, no good either. Please help, I hate Lynksys!
 

Answer:Lynksys software won't let me uninstall

Linksys is very good, in general.
What software are you trying to remove?
This kind of problem can frequently be solved by reinstalling the software, then uninstalling.
 

2 more replies
Relevance 45.1%

i need to configure a lynksys router to allow a webserver on the net
this is a new one for me
i can get into the lynksys router through the ip address
just dont know what to change
have windows server 2000 on the server
have 5 computers on the local network and am getting on the net through a cable modem
intend on buying a static ip but just not yet

it is my 14 year old that is going to run the server
im just not up on this technology

all help will be gladly appreciated

thanks in advance

ps have been looking for links on the net but have had no luck
 

Answer:configure lynksys router

8 more replies
Relevance 45.1%

Hi,

I have a Lynksys Wireless B USB adapter that was working, and quit for some reason. I went to Staples and bought a Lynksys Wireless G USB adapter and have installed it. The B is still plugged in, and it is working now and connects to the network but the G won't. I am running WinXP SP2, and have Zone Alarm. In Zone Alarm both adapters are showing up, but just the B has an IP Address. When I added the G adapter, I didn't find any way to configure it in Zone Alarm.

Anyway, I am wondering if the G adapter will make the wireless connection faster, or should I just stick with the B?

I am not very knowledegeable in networking. BTW, I disabled the B, tried to connect with the G but it would not connect. Do I need to remove the drivers and all for the B before the G will work, and if so, how?

Thanks,

ThaBrudda
 

Answer:Wireless Lynksys G Adapter

The G adapter will only improve speed if your access point is also running 802.11g. And it will only make a difference for transfer within the network- no noticeable increase in internet speed.
 

2 more replies
Relevance 44.28%

So..

i have the wireless G gate way (WCG200)

I need to access software remotely (for school)

I know i need to forward port 6000

but i'm totally lost on how to do it..

i'm in the settings for my router.. but it seems like i can only foward up to port 256.. i'm just totally lost..

anyone have a clue as to how i shoudl do this?
 

More replies
Relevance 44.28%

I replaced my Lynksys WRT 300 with a new Cisco E3000 and I cannot get the software installed on my two Lenovo T400 laptops. I get an error message that says the router requires that Windows manage the connection and that I must disable the Think Vantage Access Conection. Has anyone else had this issue? Does anyone have a solution?













Solved!

Go to Solution.

Answer:Lynksys routers and T400 compatibility

Are you running XP? If so:http://oit.pdx.edu/use-windows-to-manage-wireless

2 more replies
Relevance 44.28%

I have 2 pcs hardwired to a Linksys router that is connected to a cable modem. Both pcs get to the Ineternet fine. All I want to do is transfer files between the two computers and still be able to connect to the Internet via the cable modem from both pcs. I have a crossover cable, but not sure why I would need it if I'm connected to the router. I have zero knowledge of setting up networks.
 

Answer:Cable modem to Lynksys Router to 2 pcs - how?

If both computers are successfully connecting to the Internet through the router, you do not need the crossover cable.

Make sure you can ping the other computer's IP address. If this fails, just for testing, make sure you turn off XP's as well as any other firewall.

Make sure you can ping the other computers by name.

Make sure you have the same workgroup name (watch for trailing spaces)

For troubleshooting purposes, turn off XP's and completely uninstall any other firewall software. You can always add more complexity after you get it working.

With XP, make sure you have the same username and password as the person logging onto the other computers. The default setting for XP Pro is to require a password for network access.

More details about how to network XP can be found at:
http://www.onecomputerguy.com/networking/xp_network.htm

There continues to be a lot of misinformation about needing NetBEUI or to changing the NetBIOS setting. You can ignore both. Installing NetBEUI to solve a networking problem will just mask a some underlying and potentially important misconfiguration with TCP/IP. The default NetBIOS setting works fine so there is no need to change that either. Just don't disable it.
 

1 more replies
Relevance 44.28%

Trying to install the router, but it freezes on step 4 and gives an error message. Ckecked connectivity, everything is ok, but still. did a hard reset, nothing helps. Running Vista Ultimate, using USB modem
 

Answer:Lynksys WRT610N installation problem

I fyou have a USB modem, what are you going to connect to the WAN port of that router?
 

1 more replies
Relevance 44.28%

I currently am connected to the internet behind a Lynksys Wireless-G 2.4 Ghz router. I have a roommate who needs to add his laptop on the LAN behind the same router. He already has a wireless card installed. What settings are required from the router parameters as well as the laptop to allow the 2nd internet connection?
 

Answer:Adding 2nd laptop behind Lynksys router

You should not have to do any thing, it should just work. If it dos not then you can send me a email and I will be more then happy to help you out.
 

2 more replies
Relevance 44.28%

Installing Lynksys Wireless-G Router in Actiontec DSL W/Wireless Gateway via Windows VISTA on HP PAVILLON MEDIA GROUP m8000 PC. In installation CD it asks the Internet Type to configure Cable or DHCP settings. The choices are DHCP,PPPOE, STATIC IP, PPTP, L2TP, TELSTRA.
It also says :
If you are unsure of these settings, do not make any changes as changes to these settings may disrupt the operation of your existing network

I have MSM as internet provider.

How can I figure out what setting it should be?
Many Thanks to you nice people donating your time and knowledge to help me and others understand the "BOSS" (Computer)
Sincerely,
110846
 

Answer:Installing Lynksys Wireless-G Router

bump
 

3 more replies
Relevance 44.28%

Hi
I?m having major problems with my router. We have a linksys WRT54GS, with a desktop connected to it via cable and my laptop running on wireless. Things were ok until a few weeks ago, when my connection started dropping more often (but it would immediately connect by itself a few seconds later). But now, I can?t even connect to the internet. Here?s the detail:
At first, I couldn?t even connect to the router, although my laptop would pick up the signal. The router is set to have a network key (WPA or WPA II), so I played around with the connection properties and changed the network authentication to OPEN from SHARED and left data encryption to WEP. Now this time I can connect to the router, access the router?s setting and access the other computer, but can?t browse the net. Just for ease, I?ve disabled the router?s security mode now.
I?m running Windows XP Security Update 2, and I have a Intel Wireless Network card 802.11 b/g.
Did I mention HOW ANNOYING this is? I also had another linksys, the WRT54G, and that thing died on me too a while ago.
And yes, I have the latest firmware.
Thanks guys.
 

Answer:Problems with the Lynksys WRT54G-S router. please help!

sami said:



Hi
I?m having major problems with my router. We have a linksys WRT54GS, with a desktop connected to it via cable and my laptop running on wireless. Things were ok until a few weeks ago, when my connection started dropping more often (but it would immediately connect by itself a few seconds later). But now, I can?t even connect to the internet. Here?s the detail:
At first, I couldn?t even connect to the router, although my laptop would pick up the signal. The router is set to have a network key (WPA or WPA II), so I played around with the connection properties and changed the network authentication to OPEN from SHARED and left data encryption to WEP. Now this time I can connect to the router, access the router?s setting and access the other computer, but can?t browse the net. Just for ease, I?ve disabled the router?s security mode now.
I?m running Windows XP Security Update 2, and I have a Intel Wireless Network card 802.11 b/g.
Did I mention HOW ANNOYING this is? I also had another linksys, the WRT54G, and that thing died on me too a while ago.
And yes, I have the latest firmware.
Thanks guys.Click to expand...

Sounds to me like an internet IP problem. Try unplugging the Modem from power for about 1 min then plug it back in. If that doesn't work try unplugging both the Router and the Modem for 1 min then plug in the Modem THEN the router. See if that refreshes the IP Address.
 

5 more replies
Relevance 44.28%

My lynksys router is not recognizing my wifes' and in-laws devices, where-as it did before.
MyTV and Printer are recognized but not anything else. HELP
chuck
xxxxx
Network Security Settings:

router username: xxxxx
router password: xxxxx
network name (SSID): xxxxx
network security type: Higher Security (WPA / WPA2)
network security key: xxxxx
connection type: Keep Alive
Model, wrt160n v.3
 

Answer:Cisco- Lynksys Wireless Router HELP

15 more replies
Relevance 44.28%

ok I finally set a password i think. I went into my router web page. went to wireless security. set up a wep passphrase and generated a key... first, is this my password when i try to connect wirelessly or not. I have tried it with every combination of username i can think of like the passphrase, the network name, admin and others but it will not let me connect. any ideas pleas help

Answer:Why wont my lynksys password work

My Linksys (Cisco) refers to it as a "Passphrase" and it is the code you enter on a computer trying to connect wirelessly. Make sure they are both using the same sort of encryption.

You're not confusing this with the router settings Password are you? That's completely different and only lets you get into the router settings, not wireless connectivity. Unless you've allowed it to be changed over a wireless connection (risky!) you'll need to connect a cable to mess with that.

9 more replies
Relevance 44.28%

Hi

I have an HP Pavilion dv6 1125ei running vista home premium SP2

I am a bit baffled. I have a lynksys router that I upgraded to WRT54GL v 4.30.15 The internet port gave up, so I bought a new one with WRT54GL v 4.30.7

The LAN on my laptop has gone on the blink, no little lights. I set up the new router, but my laptop does not see it. I tried the disc set up, but it gave me a message that it could not find my wireless adapter. Therefore it could not connect to the router. My network center reports that it cannot find any networks.

My wireless adapter is showing as on, if I plug in the old router it is found and I am able to put in 192.168.1.1 and pull up my old config.

My brothers computer running windows 7 can see the router and I am able to enter 192.168.1.1 and view the config. I had a Lan connection connected

My old config runs on wireless channel 6-2.437 GHZ and the new router is on channel 11-2.437GHZ

Could the problem be because I am unable to connect to the router via LAN for the initial set up? If so is there any way around it? I bought my laptop in a different country and getting a new LAN card will be a hassle as HP pavilions have no authorised agent here.
 

Answer:Unable to connect to new lynksys router

I would conclude that the "new" router is actually a used one because the channel is set to 11. The default for a Linksys is channel 6 which is where it should be from the factory. This causes me to wonder what other settings have been altered in the router.

I would suggest pressing and holding the reset button for about 20 seconds, then restart the router by briefly unplugging the power to it. this should restore the factory defaults. That should have the SSID set to Linksys and the channel back to 6 with no security in place. You should then be able to make whatever adjustments you want from there.
 

2 more replies
Relevance 44.28%

Looking for a link or a guide to help conneting my D-link camera to the internet through a new lynksys router. Is there a guide for dummies out there? Maybe a publication on the web? I can access the webcam local at home but need education as to how to gain or setup remote access through the internet.
 

More replies
Relevance 44.28%

I have a Lynksys NR041 Router i am having 2 problems with it.

1. After i get it connected it will disconnect after about half an hour or sooner.

2. When it becomes disconnected it doesent work for some time afterwards.

please help me on this issue i've spent hours trying to figure out these problems...

Answer:Lynksys NR041 disconnects frequently

I just Updated the firmware and it only stayed connected for less than 5 min.
This is dirving me crazy...

SOMEONE PLEASE HELP ME!

3 more replies
Relevance 44.28%

The Lynksys Wireless Router (WRT54G2)worked fine for maybe a year but now I find myself continually unplugging (and plugging in again)the router in order for either my hard wired or wireless pc to access the internet. Can anyone tell me how to get this router to work correctly. I'm assuming it has something to do with the IP address but I'm not very savy when it comes to the technical things.
 

More replies
Relevance 43.87%

just a few things going on with my wireless-g router it was working one moment then not at all the next. i have a few qustions about what some of the lights mean ... electronically.

first the POWER light is inexplicably flashing on and off i took this to mean there was a short, open, undervoltage or overvoltage. maybe a bad capacitor or inductor. Or loosly soldered resistor so i took it apart and visually inspected it looking for scorch marks and loose components. all was in order.

then there is the DMZ light which im not to sure what it stands for other than de-militarized zone like the 49th parrallel then i realize that has nothing to do with routers and feel like an idiot. a friend explained it as a sort of safe mode for the router. what causes this light to turn on?

and finally the elusive orange light behind the cisco systems emblem on the front what in the world does that do?

oh also in cmd i tried to release and renew my ip but it failed and timed out
 

Answer:Solved: lynksys wireless g router questions.

Whatever your User Guide says about the meaning of the LEDs is usually more accurate than what I guess, but I'll guess anyhow.

Power light blinking means, as you said, something drastically wrong. Maybe it's time for a new router.

With respect to a router, putting a computer into the DMZ means to pass through all messages, probes and attacks to that computer as if the NAT layer didn't exist. My guess is that the DMZ LED turns on to indicate the use of DMZ.

And maybe the orange light behind the cisco systems emblem is just to make sure you're aware of the Linksys owner.
 

2 more replies
Relevance 43.87%

Hi

I upgraded my Lynksys router to DD-WRT. Now I am unable to login to a program I use. I was told to open ports 80, 1111, and 1935 in my router. I have checked on the net, but the instructions vary. Do I use single port forwarding, port triggering, port range or QoS? I also want to double check that I enter my ip as per ipconfig in DOS. I have a static ip from my ISP.

Any help would be appreciated.

P.S I did try disabling my router firewall, but that didn't help. I want to use the LAN connection on my laptop as the program does not support wireless. I have a satelite connection
 

Answer:Opening Ports - lynksys router with DD-WRT upgrade

Like that.. my PC has an internal static IP of 192.168.1.100, so from the net I want to PCanywhere to it so I setup the ports accordingly.
This is a new Buffalo router with DD-WRT installed. You'll want to static your local IP, so the PC doesn't 'move' from the IP your putting in the router.
 

4 more replies
Relevance 43.87%

Hi I'm having difficulty connecting a second pc to my wireless connection.
Both pc's are using lynksys wireless pci cards to do so but one which i just installed today won't connect to internet.
Originally the router and 1st pc were connected to internet at a different household but i recently moved them into another house and had no problems connecting to the internet as everything was done automatically and all of the ip settings remained the same.
Now i've installed an identical pci wireless card to another pc and attempted to connect to the internet. It says it has connected to the router but that the internet cannot be found.
If i allow this pc to automatically find it's ip and stuff it comes up something that isn't even close to correct (may possibly be the old ip used to connect directly to internet before router was added). But if i input the ip details manually using the same as on the other pc but changing final ip digit by one it still cannot find the internet.
I also can't use a browser to connect to the router to adjust any of the settings or renew settings which to me suggests that the pc isn't even connected to the router?

Any heres the info from cmd ipconfig /all although it won't let me renew it on the 2nd pc which i don't know why either it just doesn't do anything and i can't type as though it's loading but it isn't.

1st pc - works

DHCP Enabled : yes
autoconfiguration enabled : yes
ip ... Read more

Answer:Problem connecting to lynksys wireless router

Please supply the following info, exact models of the equipment please.

The name of your ISP and country of residence.
Make/model of the broadband modem. If dial-up, please specify.
Make/model of the router (if any).
Connection type, wired, wireless.
Make/model of network card or wireless adapter.
Make/model of your computer (motherboard if home-built).
Version and patch level of Windows on all affected machines, i.e. XP-Home SP2.
 

1 more replies