Computer Support Forum

BSOD caused by ntoskrnl.exe 0xc000021a on Windows 8.1 Pro

Question: BSOD caused by ntoskrnl.exe 0xc000021a on Windows 8.1 Pro

Hi I've been experiencing BSODs for the past week and was using Windows 8. As many system files was corrupted I thought it was causing by my faulty hard drive. So, I freshly installed Windows 8.1 Pro x64 on my PC. Then, I installed all required drivers, Avast! Free Antivirus, Comodo Firewall and some softwares. Now again I am getting occasional BSODs. Even sometimes when my computer becomes active from idle mode it automatically restarts and after reboot it shows information about last BSOD.

I checked minidumps with nirsoft's BlueScreenView and got that those BSODs are caused by the same ntoskrnl.exe error 0xc000021a. I am no expert when tackling BSODs. I would greatly appreciate any help offered on this matter.

Thank you.

Relevance 100%
Preferred Solution: BSOD caused by ntoskrnl.exe 0xc000021a on Windows 8.1 Pro

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: BSOD caused by ntoskrnl.exe 0xc000021a on Windows 8.1 Pro

Hi RickDutta & Welcome to the forums ^_^,

I apologize for the late reply but there are not many BSOD analysts and sometimes we do get overwhelmed as well . Your patience is appreciated.

I have analyzed your dump files and below has been provided an analysis of them for informative purposes :-

Code:
**************************Sun Aug 17 06:20:56.295 2014 (UTC + 5:30)**************************
Probably caused by : ntkrnlmp.exe ( nt! ?? ::OKHAJAOM::`string'+e30 )

BugCheck C000021A, {ffffc0000b43a660, 0, 0, 0}
BugCheck Info: WINLOGON_FATAL_ERROR (c000021a)

Arg2: 0000000000000000, Error Code.

BUGCHECK_STR: 0xc000021a_RPC_Terminated

PROCESS_NAME: services.exe

FAILURE_BUCKET_ID: 0xc000021a_RPC_Terminated_nt!_??_::OKHAJAOM::_string_

MaxSpeed: 2530

CurrentSpeed: 2533

BIOS Version 080012

BIOS Release Date 07/18/2008

Manufacturer Kobian

Product Name PI945GCM

??????????????????????????????????????????????????????????????????????????????????????``
**************************Sat Aug 16 12:42:42.718 2014 (UTC + 5:30)**************************
Probably caused by : ntkrnlmp.exe ( nt! ?? ::OKHAJAOM::`string'+e30 )

BugCheck C000021A, {ffffc0000b3a2860, 0, 0, 0}
BugCheck Info: WINLOGON_FATAL_ERROR (c000021a)

Arg2: 0000000000000000, Error Code.

BUGCHECK_STR: 0xc000021a_RPC_Terminated

PROCESS_NAME: services.exe

FAILURE_BUCKET_ID: 0xc000021a_RPC_Terminated_nt!_??_::OKHAJAOM::_string_

MaxSpeed: 2530

CurrentSpeed: 2533

BIOS Version 080012

BIOS Release Date 07/18/2008

Manufacturer Kobian

Product Name PI945GCM

??????????????????????????????????????????????????????????????????????????????????????``


Below is a list of the 3rd party drivers present on your system :-

Code:
**************************Sun Aug 17 06:20:56.295 2014 (UTC + 5:30)**************************
stwrt64.sys Fri Dec 14 05:22:29 2007 (4761C5BD)
Rtnic64.sys Fri May 30 20:42:23 2008 (48401957)
PxHlpa64.sys Tue Apr 24 22:56:29 2012 (4F96E245)
intelppm.sys Thu Aug 22 14:16:35 2013 (5215CFEB)
intelide.sys Thu Aug 22 17:10:03 2013 (5215F893)
nvhda64v.sys Thu Nov 28 19:08:09 2013 (52974741)
WinDivert.sys Tue Dec 3 09:16:09 2013 (529D5401)
inspect.sys Thu Apr 17 02:01:47 2014 (534EE8B3)
cmdhlp.sys Thu Apr 17 02:01:47 2014 (534EE8B3)
cmderd.sys Thu Apr 17 02:01:57 2014 (534EE8BD)
cmdguard.sys Thu Apr 17 02:02:12 2014 (534EE8CC)
SbieDrv.sys Thu May 29 23:46:25 2014 (53877979)
aswHwid.sys Thu Jun 26 17:01:26 2014 (53AC048E)
aswMonFlt.sys Thu Jun 26 17:02:51 2014 (53AC04E3)
aswRdr2.sys Thu Jun 26 17:03:28 2014 (53AC0508)
aswSnx.sys Thu Jun 26 17:04:44 2014 (53AC0554)
aswVmm.sys Thu Jun 26 17:05:49 2014 (53AC0595)
aswStm.sys Thu Jun 26 17:17:09 2014 (53AC083D)
aswSP.sys Wed Jul 2 23:08:12 2014 (53B44384)
nvlddmkm.sys Wed Jul 2 23:12:02 2014 (53B4446A)
??????????????????????????????????????????????????????????????????????????????????????``
**************************Sat Aug 16 12:42:42.718 2014 (UTC + 5:30)**************************
aswRvrt.sys Thu Jun 26 17:05:39 2014 (53AC058B)


http://www.carrona.org/drivers/driver.php?id=stwrt64.sys
http://www.carrona.org/drivers/driver.php?id=Rtnic64.sys
http://www.carrona.org/drivers/driver.php?id=PxHlpa64.sys
http://www.carrona.org/drivers/driver.php?id=intelppm.sys
http://www.carrona.org/drivers/driver.php?id=intelide.sys
http://www.carrona.org/drivers/driver.php?id=nvhda64v.sys
http://www.carrona.org/drivers/driver.php?id=WinDivert.sys
http://www.carrona.org/drivers/driver.php?id=inspect.sys
http://www.carrona.org/drivers/driver.php?id=cmdhlp.sys
http://www.carrona.org/drivers/driver.php?id=cmderd.sys
http://www.carrona.org/drivers/driver.php?id=cmdguard.sys
http://www.carrona.org/drivers/driver.php?id=SbieDrv.sys
http://www.carrona.org/drivers/driver.php?id=aswHwid.sys
http://www.carrona.org/drivers/driver.php?id=aswMonFlt.sys
http://www.carrona.org/drivers/driver.php?id=aswRdr2.sys
http://www.carrona.org/drivers/driver.php?id=aswSnx.sys
http://www.carrona.org/drivers/driver.php?id=aswVmm.sys
http://www.carrona.org/drivers/driver.php?id=aswStm.sys
http://www.carrona.org/drivers/driver.php?id=aswSP.sys
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys
http://www.carrona.org/drivers/driver.php?id=aswRvrt.sys
Please follow the steps below, one step at a time :-

Please update the drivers highlighted in RED as they are very old and the chance of them being compatible with Windows 8.1 is extremely less.Please remove Avast & Comodo using these **TOOL** & **TOOL** respectively.Your BIOS dates back to 2008 which is extremely old. Please check if there are any updates to your BIOS from the Motherboard manufacturer/OEM. If no update is available then you would have to downgrade to Windows 7 and see if you are getting BSOD's or not.Please run Driver Verifier using this **GUIDE** and make sure you let it crash for atleast 4-5 times.
Let me know how it goes ^_^

3 more replies
Relevance 80.36%

Here it is. I was about to sleep last night and turned my laptop off. Then when i woke up this morning i turned on my Laptop and BSOD always popping up. Can't even reach the Windows logo. Here's my DM created file. Please Help!!!

PS: Sorry for my bad english

Answer:Windows 7 How to fix BSOD caused by ntoskrnl.exe

You need to reinstall a legal version of Windows.

You have an HP OEM on an eMachines computer,


Code:
Product ID: 00359-OEM-8992687-00010
Original Install Date: 8/4/2015, 2:53:53 PM
System Boot Time: 10/13/2015, 11:14:49 AM
System Manufacturer: eMachines
System Model: eM250
System Type: X86-based PC

Code:
OS Name: Microsoft Windows 7 Home Premium
OS Version: 6.1.7600 N/A Build 7600
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
No SP1 or updates installed either.

Who knows what this driver is,


Code:
BugCheck 7F, {d, 0, 0, 0}

*** WARNING: Unable to verify timestamp for 8574.sys
*** ERROR: Module load completed but symbols could not be loaded for 8574.sys
Probably caused by : 8574.sys ( 8574+b5af )

Followup: MachineOwner
I can't find it anywhere, probably a result of the counterfeit install.

3 more replies
Relevance 80.36%

Hi guys,

First I'm running on :

? OS -Windows 7
? x64
? OEM version but purchased from retailer (weird I know)
? Age of system : 1.5 year
? Age of OS installation 1.5 years
? CPU : Core Quad Q8400 2.66 GHz
? Video Card : Ati Radeon hd 4870 1 Gb
? MotherBoard : Asus P5qd
? Power Supply : Corsair 550 Watts
RAM : Corsair 4gb XMS 2 (2x2Gb) 800 Mhz DDR2

Since I built my computer, i get once a day a Bsod often caused by ntoskrnl.exe. I tried everything : changing DRAM voltage, updating video/bios/everything drivers.
My DRAM is not guilty, I'm sure of it.

Can you help me ? I'm desperate...

Thanks in advance guys.
PS : impossible to get the perfmon /report (the report is not generated, googleing). I am checking the hard drive.

Answer:The well known Windows 7 Bsod caused by ntoskrnl.exe !

Hello,

The dumps point to an apparent hardware issue; however, I wonder if SPTD is causing that.

Uninstall Daemon Tools, and then remove SPTD with this tool: http://www.duplexsecure.com/download...t-v174-x64.exe

Also, run Prime95 - both the Blend and Small FFTs tests.

http://www.sevenforums.com/tutorials...t-prime95.html

Finally, enable driver verifier, if the BSODs persist.

...Summary of the dumps:

Code:

Built by: 7600.20738.amd64fre.win7_ldr.100618-1621
Debug session time: Tue Jan 4 11:58:32.690 2011 (UTC - 5:00)
System Uptime: 0 days 0:26:16.641
*** WARNING: Unable to verify timestamp for PROCEXP141.SYS
*** ERROR: Module load completed but symbols could not be loaded for PROCEXP141.SYS
Probably caused by : PROCEXP141.SYS ( PROCEXP141+160a )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x93
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x93_PROCEXP141+160a
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Jan 4 12:31:07.571 2011 (UTC - 5:00)
System Uptime: 0 days 0:02:48.023
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35195 )
BUGCHECK_STR: 0x4E_7
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_0x4E_7_nt!_??_::FNODOBFM::_string_+35195
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.20738.amd64fre.win7_ldr.100618-1621
Deb... Read more

4 more replies
Relevance 79.54%

Hi. i just want to ask for help on how to solve random blue screen of deaths on my newly purchased netbook.
if i'm not mistaken it is caused by these drivers: ntoskrnl.exe and ntfs.sys ; i don't know to fix the problem.
i've already brought it back where i purchased it and they sent it on repair but when i start it up again, it crashed again
as soon as i finished the set up so i tried to solve the problem by installing RegClean Pro and on 1st scan it fixed
almost 180 errors. i thought i finally solved the problem because i was able to use my netbook for almost 2 hours without
the BSOD but when i start it up after more than 24hrs of being shut down, it crashed again. i hope you can help me solve this
problem, it's very annoying and frustrating!!!!

I have attached the dump files and other things as instructed.. hope to hear from you soon!! Thanks in advance!!!

P.s. after some observation,, bsods happen a few times only after i've just started up my computer but after using it for a while it never crashed again until i shut it down but it crashes again when i used it the next day....
my netbook is Windows 7 x64
it is the original installed OS on the system
it's OEM...(finally get what it means...hehe)
and my netbook is newly purchased...it's only been a month since i bought it..

Answer:frequent BSOD caused by ntoskrnl.exe and many others on windows 7

Various different errors, mostly false positive fault processes and some memory corruption. This is either driver related (we don't know yet) or memory related.

Three tests I'd like you to run:





Quote:

Chkdsk:

Open the "Computer" window
Right-click on the drive in question
Select the "Tools" tab
In the Error-checking area, click <Check Now>.
Memtest:

Read the following to test your memory for errors.

Driver Verifier:

Read the following to enable Driver Verifier. Use Driver Second if Memtest finds nothing, as it's likely a software / driver issue, we just aren't being told what it is, and hopefully Driver Verifier will than force a crash if it finds the violating driver.



Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc000001d, The exception code that was not handled
Arg2: fffff80001aa... Read more

9 more replies
Relevance 79.54%

Hi everyone,
As I was putting my PC into sleep mode today I received the BSOD. I downloaded BlueScreenView and scanned my mini dump files. The program informed me that the crash was caused by the driver ntoskrnl.exe My question is how do I fix this so that it doesn't happen again. Please forgive my ignorance; I'm not good with this sort of thing. If you require any more info I'm more than happy to provide it. Below I have included the details of the crash which were provided by BlueScreenView

A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x0000000a (0x0000000000000000, 0x0000000000000002, 0x0000000000000001,
0xfffff80003c804bc)

*** ntoskrnl.exe - Address 0xfffff80... Read more

Answer:Windows 7 BSOD Caused by driver ntoskrnl.exe

Follow Blue Screen of Death (BSOD) Posting Instructions
Make sure the zip file includes the dmp file/s. If not, configure a small memory dump - Dump Files - Configure Windows to Create on BSOD and wait/trigger another BSOD. then re-run the "Dm log collector" and attach the new report.

4 more replies
Relevance 78.72%

Got my first blue screen of death tonight, had 2 firefox opened one watching youtube video another browsing internet. After bsod it restarted i login but just black screen with cursor, ctrl alt delete worked so i shut my computer down. Boot up normally after, check my minidump file, bsod cause by ntoskrnl.exe. Did little search on google find has to do with ram and hard drive.

Downloaded wd data life guard diagnostic for my mechanic drive which is healthy but my ssd on shows failed end to end error rate(value/threshold/worst is all 0) in SMART statue. Im not sure if i can trust this wd diagnostic on my crucial ssd, there are alot of unknown in SMART statue too. Theres no ssd diagnotic for crucial, there is a firmware not sure if it helps. So i downloaded and ran crystaldiskinfo on my ssd, health statues says good, it doesnt say end to end error rate like wd. Instead same ID B4 line says "unused reserve nand blocks" instead. Is my ssd good? i havent ran a test on my ram yet.
This is almost 3 month old build
Asrock x99x killer
i7 5820k
gtx 970
850w
crucial 2x4gb
crucial 256gb ssd
wd blue 1tb

Heres info of bsod with bluescreenview
Bug Check String- IRQL_GT_ZERO_AT_SYSTEM_SERVICE
Bug Check Code - 0x0000004a
Parameter 1- 00000000`7709dc4a
Parameter 2- 00000000`00000002
Parameter 3- 00000000`00000000
Parameter 4- fffff880`08167b60
Caused By Driver- ntoskrnl.exe
Caused By Address- ntoskrnl.exe+72a40
File Description- NT Kernel & System

Answer:BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40)

Blue Screen of Death (BSOD) Posting Instructions

9 more replies
Relevance 78.72%

so i was reading up on it, and it was saying that a short in my keyboard could be the problem? so far it seems to be the same bug check code. and bug check string, but im not sure what to do with this information? i've attached all my information.

Answer:BSOD after installing fresh windows, caused by what seem ntoskrnl.exe

Uninstall all gigabyte related software and see if you still get BSOD's. Driver Reference Table

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows you to remove leftover registry:-Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems


Code:

Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\USER\Downloads\Compressed\SF_02-11-2014\110214-68858-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Machine Name:
Kernel base = 0xfffff800`02a16000 PsLoadedModuleList = 0xfffff800`02c59890
Debug session time: Sun Nov 2 16:42:19.961 2014 (UTC + 6:00)
System Uptime: 0 days 0:02:24.726
Loading Kernel Symbols
...............................................................
................................................................
..........................
Loading User Symbols
Loading unloaded module list
..........................
*******************************************************************************
* ... Read more

1 more replies
Relevance 78.72%

After half a year of using my Toshiba Satellite Pro L300 it suddenly started to crush to BSoD right after booting Windows 7. I got a report by BlueScreenView telling the problem would be the files halmacpi.dll, ntkrnlpa.exe and ntoskrnl.exe (each time a diferent one). In secure mode everything works fine. I reinstalled the video chipset driver, the crushing stopped for a while, but now it happens again appr. once a day. What could the problem be? Thanks in advance.

Answer:Windows 7 BSOD caused by halmacpi.dll, ntkrnlpa.exe and ntoskrnl.exe

OK, here the files needed for the analysis.

2 more replies
Relevance 78.72%

Hello,
I am new to these forums. I'm unfamiliar with reading MiniDumps to diagnose this particular BSOD. Any help will be appreciated, thanks.
I have attached a minidump.
http://www7.zippyshare.com/v/331466/file.html
0x1000009f DRIVER_POWER_STATE_FAILURE caused by ntoskrnl.exe windows 7 x64
==================================================
Dump File         : 121013-8938-01.dmp
Crash Time        : 10-12-2013 23:50:39
Bug Check String  : DRIVER_POWER_STATE_FAILURE
Bug Check Code    : 0x1000009f
Parameter 1       : 00000000`00000004
Parameter 2       : 00000000`00000258
Parameter 3       : fffffa80`0cd29b50
Parameter 4       : fffff800`02480740
Caused By Driver  : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+78a8a
File Description  : NT Kernel & System
Product Name      : Microsoft® Windows® Operating System
Company           : Microsoft Corporation
File Version      : 6.1.7601.18247 (win7sp1_gdr.130828-1532)
Processor         : x64
Crash Address     : ntoskrnl.exe+78a8a
Stack Address 1   :
Stack Address 2   :
Stack Address 3   :
Computer Name  ... Read more

Answer:BSOD 0x1000009f DRIVER_POWER_STATE_FAILURE caused by ntoskrnl.exe windows 7 x64

This is likely due to out of date or conflicting drivers. Please run these for us.
 
Please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
And
 
Please download MiniToolBox  , save it to your desktop and run it. Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size. Click Go and paste the content into your next post.

6 more replies
Relevance 77.49%

Hi,

After performing a fresh install along with the basic drivers to get me going everything went fine. however after windows connected to the internet and downloaded and installed the so called important updates the system restarted just before windows logon screen it was applying the usual changes got to about 32% of 5 of 5 updates then bsod on me. the only way i could get back into system was to boot into safe-mode then let it revert/roll back. iv not changed the hardware and in all the times ive done this before iv never had this happen before. due to disability i rely on pc for everything please advise.

many thanks

nw

Answer:BSOD caused by ntoskrnl.exe after clean install/windows update.

Hello, nwalker78 and welcome to the Forums. I will try to help you if I can. You had 3 dump files and all 3 were the same.


Code:
BugCheck A, {0, 2, 1, fffff80002ec6b5f}
*** WARNING: Unable to verify timestamp for SYMNETS.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMNETS.SYS
Probably caused by : NETIO.SYS ( NETIO!WfpExpireEntryLru+17 )
Followup: MachineOwner
The NETIO is the Windows controller for the network I/O system. SYMNETS is your Symantec/ Norton NIS/ N360 Network Security driver. It appears that your Norton product is causing issues with the Network system and causing it to crash. Notice that the Norton driver is their Network Security Driver. Norton/Symantec has been a well known cause of BSODs for some time.

I would remove Norton and use their removal tool (https://support.norton.com/sp/en/us/...rProfile_en_us) and replace it with Microsoft Security Essentials (Microsoft Security Essentials - Microsoft Windows) to see if that will resolve your problem. Try that and let me know how it works for you. If you get any more crashes, please upload another DM Log.

3 more replies
Relevance 76.67%

Hi,
I need your help, got startup problem like in title. Computer works, but when I tried to reboot, the BSOD comes out and I must start system using my backup file. Please help or comments. I don't know how to change that driver file or disable it. I think it may works..
Thx for everything

Answer:BSOD when start windows, error 0x0000006b,caused by driver ntoskrnl.ex

Blue Screen of Death (BSOD) Posting Instructions

6 more replies
Relevance 71.75%

Hi guys I just got a BSOD from what looks like ntoskrnl.exe. I have been taking computer repair classes at my high-school because I love fixing computer but I have never seen this before and after some time spent researching I was wondering if this is a serious problem with my laptop. My laptop specs are; My computer is still less then a one years old.
Model:HP Pavilion dv6
OS: Windows 7 Home Premium x64
Ram: 8gb(Came with 6gb but I discharged one of the ram sticks by accident)
Processor:2nd Gen Intel Core i5
If I forgot anything please let me know and ill make sure to include it for this is my first time ever posting a forum. Any help is greatly appreciated and thank you for you time.

Answer:BSOD caused by ntoskrnl.exe?

NEOFLTR_700_18809.SYS is causing the problem. I couldn't find a reference for it so it may be part of your McAfee AV system. Some AV programs are known to cause a D1 Bug Check code. Someone more familiar with this file may be along shortly.

Image path: \??\C:\Windows\system32\Drivers\NEOFLTR_700_18809.SYS
Image name: NEOFLTR_700_18809.SYS
Timestamp: Fri Jul 08 15:41:22 2011 (4E176B72)
CheckSum: 0001AF64
ImageSize: 0001B000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.

3 more replies
Relevance 71.75%

I had two BSOD crashes in the last 5 days and I am worried, the screen gave Memory Managment error and looking into the crash I found that it was ntoskrnl.exe that caused it. Please help
Thanks Titanicoso

Answer:BSOD caused by ntoskrnl.exe

Hi,

Please refer to the following and reply back accordingly with the required information - http://www.techsupportforum.com/foru...ta-452654.html

Regards,

Patrick

13 more replies
Relevance 71.75%

Hello, i really need your help hier. My PC is crashed and frozen randomly ( while watching movies, youtube. surf net ) and I cant do anything but hard reset. Here ist the dump file, hope that you guys can read and tell me how to fix it.
My specs:
AMD Phenom II 1055T 6x2,8ghz
ASUS M4N68T-M LE
ATI Radeon HD5830

Thank you very much!!!

Answer:Help please, BSOD caused by ntoskrnl.exe

please folow this posting instructions:

http://www.sevenforums.com/crashes-d...tructions.html

i think you shuld update your graphic card drivers...

3 more replies
Relevance 71.75%

I've been blue screening alot lately and have ran through every possible idea. All my drivers are updated, I've ran memtest and didn't come across any issues, and I've ran a stress test on my gpu none of which I have ran into issues. I've reinstalled my gpu drivers and reinstalled windows and still this problem comes up. The only logic choice is that my mobo might be failing.

More replies
Relevance 71.75%

BSODs happening at different intervals. All of them except one have said ntoskrnl.exe was the cause and at the same address. I've checked my memory with memtest for 9+ passes, ran the scannow with no violations, and updated firmware on the SSD that Windows 7 is installed on. The BSODs continue to happen.

Any ideas? Thanks for your time.

Answer:BSOD caused by ntoskrnl.exe

Follow this -







  
Quote: Originally Posted by writhziden


If you have an SSD, make sure the following are up to date:SSD firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.



Reduce items at start up:Performing a Clean Startup in Windows 7

Add, or Remove Startup Programs in Windows 7
Your Antivirus software is basically whats just needed there.

Use the System File Checker tool and Run Disk Check: Repair Windows 7 System Files with System File Checker

Run Disk Check in Windows 7 for Bad Sectors & Errors
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, fffffa800a109b30, fffffa800a109e10, fffff80003189350}

----- ETW minidump data unavailable-----
Probably caused by : csrss.exe

Followup: MachineOwner
---------

9 more replies
Relevance 71.75%

firstly i found it is my nivida (n2_dis.sys or something)then this time it says its the ntoskrnl.exe..what is it?how do i update it?i hope updating this would solve it as i got 3 bsod today again!!!

More replies
Relevance 71.75%

Hey guys;

I searched these forums for other posts; and generally people just suggested repairing windows.

When i try an repair my windows 7 (Ultimate 64bit) it tells me it cannot upgrade my system to 32bit, and yes i have been clicking x64 when i choose my system type.

Ill dump the Bluescreen viewer reports here as well as the report/.

Thanks for the help guys.

Answer:BSOD being caused by ntoskrnl.exe

Welcome to the forum. I am sorry your are having problems.

Both of your dumps blame memory corruption and do not point to any specific cause.






Quote:
Error code A, IRQL_NOT_LESS_OR_EQUAL. Usually causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility

Error code 1E, KMODE_EXCEPTION_NOT_HANDLED . Usual causes: Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS



Code:
Kernel base = 0xfffff800`02a14000 PsLoadedModuleList = 0xfffff800`02c51e50
Debug session time: Fri Oct 8 17:08:19.452 2010 (GMT-4)
System Uptime: 0 days 4:31:44.294
Loading Kernel Symbols
...............................................................
................................................................
.........................
Loading User Symbols
Loading unloaded module list
........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffffa8050910220, 2, 1, fffff80002aa9b7f}

Probably caused by : memory_corruption ( nt!MiReplenishPageSlist+100 )

Followup: MachineO... Read more

4 more replies
Relevance 71.75%

Hello There
Since a while my computer gets Blue Screens this tends to happen only once a day, around 10 minutes after i turn the computer on usually when i play battlefield 3 or View news in Firefox ( Graphic related i think ) so this error happens only once and after i restart, it doesn't happens again

I have tested memory yesterday with a Linux men test but there are no errors
BIOS is set to standard and updated as well
Graphic Drivers are Updated

I have no other ideas what it could be

Here are the dump log files, if something else needs to be provided please let me know

LOGO-PC-22_05_2015_193505,70.zip
Dmp01.jpg

thanks in advance for any suggestions and your time

Answer:BSOD Caused by ntoskrnl.exe

Hello Logo, welcome to 7F. There's only one dump in your log but it shows a couple of issues. The first one is ESET.
Code:
fffff880`084513e8 fffff880`03706a3eUnable to load image eamonm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for eamonm.sys
*** ERROR: Module load completed but symbols could not be loaded for eamonm.sys
eamonm+0x1ca3e

Code:
fffff880`0844fff8 fffff880`052175d0Unable to load image epfwwfpr.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for epfwwfpr.sys
*** ERROR: Module load completed but symbols could not be loaded for epfwwfpr.sys
epfwwfpr+0x175d0
My recommendation here would be to uninstall ESET using the tool linked below.
Then install MS Security Essentials and MalwareBytes.



   Note
Make sure you uncheck the 'Enable Free Trial' box when installing MalwareBytes.


Your Realtek Ethernet driver is also causing issues. It' very old and needs updating, check here for an updated version.
Code:
fffff880`08450988 fffff880`047392fb
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Rt64win7+0xc2fb

5: kd> lmvm Rt64win7
start end module name
fffff880`0472d000 fffff880`04784000 Rt64win7 T (no symbols)
Loaded symbol image file: Rt64win7.sys
Image path: Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Thu Mar 04 13:42:52 2010 (4B8FB8DC)
... Read more

7 more replies
Relevance 71.75%

Hello,

I would like to find out why I'm getting these blue screens on my new built. I started some troubleshooting by disabling and removing some of drivers and memory, running memtest86+ for over 12 hours, removing my external 7 port USB hub and USB Sound card but still get these BSOD. I'm getting these blue screens from ntoskrnl.exe mostly, win32k.sys and ksaud.sys (so far) and I have attached all latest (after last install) BSOD reports here.

I'm running Vista x64 bit ultimate, retail version and I have installed it 3 times trying to correct the problems. I built this PC about 3 months ago using all brand new parts.


System Hardware:
Raidmax case with Thermaltake Toughpower XT 775W power supply (TPX-775MPS)
2 Pioneer SATA DVR-216D DVD/CD-ROM drives
Gigabyte GA-880GA-UD3H motherboard
AMD Phenom II X4 965 Black Edition Deneb 3.4GHz
G.SKILL Ripjaws Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666)
Sapphire ATI Radeon HD5770 1GB video card
Western Digital Black 1TB SATA 6.0 7200RPM 64MB Cache HD
Western Digital Black 640GB SATA 6.0 7200RPM 64MB Cache HD
TP Link USB TL-WN722N wireless adapter
Creative Labs USB X-Fi Surround 5.1 (external sound card)

No virus/spyware or firewall software other than Microsoft’s firewall and defender

I would appreciate any help you can give me here and thank you for your time.

PS. not ever overclocking anything..

Answer:BSOD caused by ntoskrnl.exe (mostly)

Hi welcome to the forum.
In view of your possible BSOD problems it would be appropriate for someone from the forum who specialises in these matters.
I would therefore ask you to be patient, and I'm sure someone will attend to you ASAP.
Thank you.

4 more replies
Relevance 71.75%

Hi,
bsod often appear in my notebook, and after I find out this was due to the ntoskrnl.exe, I've been browsing for a solution but have not gotten a satisfactory answer. please help solve my problem,
here I attach the minidump file that causes bsod.
Thank you.

Answer:BSOD caused by ntoskrnl.exe

sorry jcgriff2,
sI recently read a bsod post intructions,
I've already done the steps from 1 to 5,
but step into the 4 ""Run a System Health Report - save in HTML (the default file extension) format: START | type perfmon / report - a viewer will Appear. Save as an HTML file.""can not be saved because the file does not have the words that appear (blank/empty file),
ok, I'll wait for an answer from you, thank you, ...

3 more replies
Relevance 71.75%

I'm getting random bluescreens caused by ntoskrnl.exe. Hope you can help me find the problem.


System Specs:
Operating System
Windows 7 Ultimate 64-bit SP1
CPU
AMD Phenom II X6 1050T 29 ?C
Thuban 45nm Technology
RAM
8.00GB Dual-Channel DDR3 @ 666MHz (9-9-9-24)
Motherboard
ASUSTeK Computer INC. M5A87 (AM3R2) 21 ?C
Graphics
V223W ([email protected])
2047MB NVIDIA GeForce GTX 660 (Gigabyte) 27 ?C
Storage
465GB Western Digital WDC WD5000AADS-00S9B0 ATA Device (SATA) 25 ?C
Optical Drives
ASUS DRW-24B1ST a ATA Device
Audio
Realtek High Definition Aud

Answer:BSOD caused by ntoskrnl.exe

bump bump

1 more replies
Relevance 71.75%

Hi, recently my notebook has frequent BSOD (always when I'm not using it)
Probably it's a bad driver, can someone help me identify it?
Here attached all the files..
Thank you!

Answer:BSOD caused by ntoskrnl.exe

Code:
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 9600.17736.amd64fre.winblue_r9.150322-1500
As it is windows 8, it would be better that you post your issue in BSOD Crashes and Debugging - Windows 8 Forums.

2 more replies
Relevance 71.75%

6 month old HP Probook 450 G1 laptop running Windows 7 sp1 blue screening. I used Nirsoft's bluescreenview and can see that most of the blue screens have been caused by ntoskrnl.exe. One crash was different - after that crash we had to boot from last known good to get the computer going again.

I did some reading on various websites on ntoskrnl the error message and on bug check 0x0000009f - with mixed results - some point to corrupt or bad drivers and other message points to it either being a memory or hard disk issue. This computer is in an office that I only have remote access to. I got a staff member to go into F2 at boot and run diagnostics and there were no errors. I will run a disk drive check when there is a staff member present to tell me what is being displayed on the screen.

I have run memory checks using MemTest - just one pass without errors. I have just started it again and will leave it to run for at least half a day as long as the computer does not crash again.

I have attached a zip file created by the dm log collector in the hope that some one might be able to help me solve this problem faster.

Answer:BSOD caused by ntoskrnl.exe

Hello, chocaholic. I will see if I can help.

You had 4 dump files. This is what they listed. I might add the first 2 were identical with one exception.


Code:

Use !analyze -v to get detailed debugging information.
BugCheck 9F, {3, fffffa800d6e9990, fffff800051293d8, fffffa800b1cd6c0}
*** WARNING: Unable to verify timestamp for btfilter.sys
*** ERROR: Module load completed but symbols could not be loaded for btfilter.sys
Probably caused by : btfilter.sys
that is the Atheros Bluetooth Driver


Code:
fff800`05129878 fffff880`05e34ed0Unable to load image Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Rt64win7+0x1aed0
that is the Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC


Code:
ffff800`05129550 fffff880`05532ff0Unable to load image SYMNETS.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SYMNETS.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMNETS.SYS
SYMNETS+0x7bff0
That is the Symantec/ Norton NIS/ N360 Network Security driver


Code:
ffff800`05129528 fffff880`05417a00Unable to load image IDSvia64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for IDSvia64.sys
*** ERROR: Module load completed but symbols could not be loaded for IDSvia64.sys
IDSvia64+0xca00
Which is the Norton Internet Security. That's 2 errors from Norton, both present in 2 dumps. Nort... Read more

9 more replies
Relevance 71.75%

Hello,

I have a problem and I hope you can help. Thank you in advance

I am running

AMD Athlon(tm) 7850 Dual-Core Processor
4,00 GB RAM
Asus M2N68-AM SE2 motherboard
NVIDIA GeForce 9400 GT 1gb


I have a pretty disturbing Problem with my Computer for some time. I am becoming irregularly BSOD.

I was running a windows XP 32 bit OS, and I had problems with the sound and with different drivers. I became a some BSOD and the cause according to the WDK (Windows Debugging Tools) minidump check was the driver of my TV-USB Stick, then of my wireless-n usb stick and at the end
ntoskrnl.exe. At some point I even lost my HDD. As I started the computer the HDD couldn't be find. I have tested it on another computer and it was found. Well I bought a new one for my PC and installed my XP again, but I got again the BSODs. At the end I thought that my 32 bit XP doesn't work good on my system.

I got an Windows 7 Professional 64 bit licence through my University. I have formatted the HDD and installed the brand new Windows 7 64 bit OS. I was running the computer for a good 2 days. I managed to install and prepare everything as it should be (latest updates etc.).

And today I got a new BSOD. I opened the minidump with the WDK and the cause is ntoskrnl.exe
What is actually doing this ntoskrnl.exe ? Why am do I still become this BSOD ?

I have tested my memory with memtest and other programs. Everything is ok. I have also checked my brand new HDD, and everything is... Read more

Answer:BSOD caused by ntoskrnl.exe

Try the steps at this link NTOSKRNL.EXE is missing or corrupt.
Hope it helps

9 more replies
Relevance 71.75%

I built my system about 6 months ago and only recently I have been getting BSOD at random times. I ran memtest which detected no errors. There are some days where I can use my PC all day with no BSOD. The temperatures seem fine as well. I have GPU overclocking software installed, but I have never used them.

EDIT: I was playing an MMO called Blade and Soul at the time of the crashes. I ran sfc /scannow and there were no integrity violations

Please let me know if you need more information.

More replies
Relevance 71.75%

I can not put my computer into sleep or hibernate. If I do, I get a BSOD. I reinstalled and installed the nvidia driver, tested it, and was able to sleep/hibernate. Then I updated and get a BSOD. I'm pretty sure it is a Windows update error. I did google searches and really didn't find anything that matched my problem entirely. Thanks for the help.

Answer:BSOD caused by ntoskrnl.exe

  
Quote: Originally Posted by deathmetalscott


I can not put my computer into sleep or hibernate. If I do, I get a BSOD. I reinstalled and installed the nvidia driver, tested it, and was able to sleep/hibernate. Then I updated and get a BSOD. I'm pretty sure it is a Windows update error. I did google searches and really didn't find anything that matched my problem entirely. Thanks for the help.


These were caused by your k57nd60a.sys driver. K57ND60A.SYS is related to Broadcom NetLink (TM) Gigabit Ethernet driver. Broadcom.com - Products

Update and re-install


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\dump\011511-22776-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c510?
Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1.721) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17105.amd64fre.win7sp1_rc.100929-1730
Machine Name:
Kernel base = 0xfffff800`02a5a000 PsLoadedModuleList = 0xfffff800`02c9de90
Debug session time: Sat Jan 15 02:44:00.710 2011 (GMT-5)
System Uptime: 0 days 2:13:36.630
Loading Kernel Symb... Read more

2 more replies
Relevance 71.75%

Hi All,
I upgraded my PC from win8 to win8.1 and i get BSOD very frequently. Tried to solve it by update all drivers, but it doesn't helps.
I ran memory diagnostic before, it show no errors. Please advice.

Attached with my dump files.

Thanks in advance

Answer:BSOD caused by ntoskrnl.exe and hal.dll, need help!!

Code:
Use !analyze -v to get detailed debugging information.
BugCheck A, {901d503, d, 1, fffff801ed4bd23f}
Probably caused by : hardware ( nt!KeClockInterruptNotify+34f )
Followup: MachineOwner
---------
6: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 000000000901d503, memory referenced
Arg2: 000000000000000d, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff801ed4bd23f, address which referenced memory
Debugging Details:
------------------

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff801ed75d138
unable to get nt!MmNonPagedPoolStart
unable to get nt!MmSizeOfNonPagedPoolInBytes
000000000901d503
CURRENT_IRQL: d
FAULTING_IP:
nt!Ke... Read more

3 more replies
Relevance 71.75%

This is not the first time I've had a bsod. But this computer is the only computer where i have gotten 'ntoskrnl.exe' as a cause. Which from reading online is i guess some sort of default when no certain cause can be found without being found manually. Which is what i do not know what to do. I really hope someone can help me out here.

when my pc crashed i was waiting in character select of GW2, i was on that screen for about 10 mins or so. this is the first time I have even gotten a bsod during any time of game play, the game did just update upon start up.

the only software i have recently installed is mcafee. my most recent updates would be toshiba qosmio bios update, gw2, and mcafee update.

Answer:BSOD caused by ntoskrnl.exe.

Please follow the http://www.techsupportforum.com/foru...ta-452654.html to provide us with the full crash reports. .dmps are helpful, but often the other reports can help further by allowing us to give specific troubleshooting steps.



-----

1 more replies
Relevance 71.75%

Hey all, I've attached 4 minidumps. Can you please help troubleshoot this intermittent BSOD?

Answer:BSOD caused by ntoskrnl.exe please help

Hi Asharus,

Welcome to the 10forums.

The Nvidia Video driver has been flagged in a crash where the memory is usually the cause.
Because there are more crashes where the memory is possibly causing it please follow the instructions below.



Diagnostic Test

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums


   Note


MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

For more analyse, please read BSOD Posting Instructions

22 more replies
Relevance 71.75%

I was having BSOD issues with windows 8, so I decided to just go back to 7 (since I wasn't liking 8 that much anyway.) I did a fresh install yesterday, and it's still crashing. I've attached the zip file as instructed, and if you need anything else, please let me know!

Windows 7 Professional 32-bit
2 GB RAM
Intel Pentium D dual-core 3.4 GHz
AMD Radeon HD 6450

Answer:BSOD caused by ntoskrnl.exe

This is a Stop 0x124 .... specially a hardware failure, but may de some hardware drivers also cause it in this case.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, 858d2024, 0, 0}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 00000000, Machine Check Exception
Arg2: 858d2024, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000, High order 32-bits ... Read more

1 more replies
Relevance 71.75%

Hello, i have been getting bsods for months now.
I have tried updating drivers, totally resetting the computer, scanning for viruses / malware i also scanned for errors on seatools for dos and it found some and fixed them and didn`t crash for 5 days so i thought i had fixed it but i just had another bsod..
here`s the log collecter info : DESKTOP-NLF5JQL-15_02_2017__22401_94.zip

Answer:BSOD normally caused by ntoskrnl.exe but sometimes different.

   Warning
Programs that claim to update your drivers install either the wrong or corrupted drivers.
If you have installed any driver with Driver Booster 4, please remove them as it may cause trouble.
An easy way to get remove these drivers is by using a restore point prior the installation.


Diagnostics Test

 HDD TEST


   Note
Please run HDTune first, in the order posted!
Run HDTune to
check the health,scan for errors, no quick scan but full scanrun a benchmark.
It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following
the health,the error scan,the benchmark incl. following
transfer rate,access time,burst rate,cpu usage.

Run chkdsk
Disk Check - Windows 7 Help Forums
Use option TWO with parameter /r
Upload the chkdsk log Check Disk (chkdsk) - Read Event Viewer Log - Windows 7 Help Forums

13 more replies
Relevance 71.75%

My 3 year old PC has started to have BSOD continually, and I cant sometimes even start up the computer because it gets a BSOD during start up. I downloaded this program "BlueScreenView" to see what causes the BSODs and in every .dmp file there is "Ntoskrnl.exe" as the cause of BSOD. I reinstalled windows but the bluescreens still come. I attached my .dmp files as instructed.

Answer:BSOD Caused by Ntoskrnl.exe

Code:
Host Name: ALLU-PC
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7600 N/A Build 7600
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Allu
Product ID: 00426-OEM-8992662-00497
Original Install Date: 10.3.2013, 12:18:03
System Boot Time: 19.3.2013, 12:41:46
System Manufacturer: System manufacturer
System Model: System Product Name
System Name ALLU-PC
System Manufacturer System manufacturer
System Model System Product Name
System Type x64-based PC
Where did you get your copy of windows from?

1 more replies
Relevance 71.75%

Hello,

Lately I have been getting the BSOD a fair bit. At first it was about once a couple of weeks, then it started increasing. I did a full format of the HDD in an effort to stop it, it didn't work. It just started occurring more often. I've tried updating all of the drivers, didn't work. I've tried updating my BIOS, it didn't work. I've done a memory test, it showed up as no errors. I've tried swapping the HDD's, and same problem. Today I've just got 3 of them. Attached is a copy of the BSOD reports.

I looked up the CACHE_MANAGER error on google and it said it was either a video card driver issue or an anti-virus issue. I updated the driver, and still got it. I've never had a problem with the NOD32 before, so I didn't think it was that. I'm hoping it doesn't mean that my video card is about to die.

I also have another question which could be a stupid one. Would having 2 different brands of RAM cause problems like this? 2 sticks are the Kingmax Hercules DDR3 2100 ram, the other 2 are GSKILL Ripjaws DDR3 1600 ram.

I'm hoping someone can help me find the problem that's causing the crashes. Any help would be appreciated.

I noticed all of these problems started happening when I tried to reset the cmos. A lot of other errors have happened since then. I can't play a game because there is an error in the disc read, even though there is no disc in the DVD drive. I can't extract anything without corrupt file errors, even though I know for a fact that they're not corrupt. I can'... Read more

Answer:BSOD at least once a day caused by ntoskrnl.exe

Sorry, I just realized I had to use the tool posted on this site and add it to a zip file. The attachment has been updated.

9 more replies
Relevance 71.75%

Hey guys, as the title says I've been getting BSOD about everyday now. I've tried troubleshooting on my own, but that hasn't worked. BCCode associated with them is either d1 or 9f (not sure if this helps).

I've attached the SF log.

I've run memtest86+ and haven't gotten a failure yet. I keep my laptop virus free. I believe my drivers are up to date.

Setup:
-HP dv6t-3100
-intel i5
-575 HDD
-6 RAM
-ATI Mobility Radeon HD 5470 & Intel HD Graphics

Any help would be great. I will be going to sleep soon (go to work early) but I will be on all day tomorrow.

Thanks!

Answer:BSOD caused by ntoskrnl.exe

Please uninstall the following software with Revo Uninstaller:

Code:
Start Menu\Programs\Ad-Aware Antivirus
Start Menu\Programs\Auslogics\Disk Defrag
Start Menu\Programs\Glary Utilities 3



   Note
Download and install Revo Uninstaller free from here: Download Revo Uninstaller FreewareOpt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).

Norton antivirus is a frequent cause of BSOD's. Uninstall all and any other antivirus software from your system. Please only keep Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately:Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Help protect your PC with Microsoft Security Essentials

Malwarebytes Free Do not start the trial version of MalwareBytes

You may also take a look at:Good & Free System Security CombinationReduce items at start up:Performing a Clean Startup in Windows 7

Add, or Remove Startup Programs in Windows 7
Antivirus software is basically whats just needed there.

Use the System File Checker tool and Run Disk Check: Repair Windows 7 System Files with System File Checker

Run Disk Check in Windows 7 for Bad Sectors & ErrorsMonitor hardware temperature with system monitoring software like Speccy or HWMonitor:
Piriform - Speccy

CPUID - HWMonitorUpload a screenshot using:CrystalDiskInfo For how to upload a screenshot or file, read here ... Read more

9 more replies
Relevance 71.75%

Hi folks - having some trouble troubleshooting a BSOD on a Lenovo Yoga 13.

BSOD screen had dpc_watchdog_violation listed, but when running the minidump through Windbg I got to this:


Code:
Probably caused by : ntoskrnl.exe ( nt+14dca0 )


Wasn't quite sure where to go from here seeing as that ntoskrnl seems to be a core part of the OS. Have attached the package from SF Diagnostic Tool in the hopes that someone can help!

Thanks - any help/tips appreciated.

Answer:BSOD probably caused by ntoskrnl.exe

Uninstall Hamachi. Enjoy.

4 more replies
Relevance 71.75%

Windows crashed while I was playing Dragon Age Origins. Can someone help me find out which driver or whatever caused this crash?

System info:
Windows 7 Ultimate x64 (retail)
Bought this computer a few weeks ago

Let me know if you guys need any more info.
Thanks a lot!

Answer:BSOD caused by ntoskrnl.exe

Hi, Luis, and welcome to the forum. Sorry you are having problems. As you noticed, the dump blames ntkrnlmp.exe. It is not likely the real cause as it is a Windows core system driver. More than likely it was affected by something else.





Quote:
Error code A, IRQL_NOT_LESS_OR_EQUAL. Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility.



Code:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02c58000 PsLoadedModuleList = 0xfffff800`02e95e50
Debug session time: Sat Oct 23 11:39:20.144 2010 (GMT-4)
System Uptime: 0 days 1:38:48.316
Loading Kernel Symbols
...............................................................
................................................................
..................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffffa5c07c26c48, 2, 0, fffff80002c... Read more

5 more replies
Relevance 71.75%

Hi, I am getting a BSOD in my machine. Before this, I also got problems with
Windows 10 and my APU (A10-4600M with AMD Radeon HD 7970M). I also fixed that
by hiding the windows update and use AMD-Catalyst 15.7.1 driver instead of a conflict driver.
Maybe those cause some problems.

Thank you in advance for your replies .
JCGX60-Fri_06_30_2017_143715_57.zip

Answer:BSOD Caused by ntoskrnl.exe and hal.dll

These errors are most likely hardware related. Analysing a x124 WHEA Hardware error requires a lot of testing to track down the culprit. You can do this by following the x124 troubleshooting section in the following tutorial. Please report back all your findings and show screenshots of the result.

WinDBG - The Basics for Debugging Crash Dumps in Windows 10

1 more replies
Relevance 71.75%

Have been facing the BSOD since last few days, unable to find out the exact issue which is creating the problem. Uploading the files as per the instructions. Please help whenever you can!

More replies
Relevance 71.75%

Hi

I got this failure. attached report. Can somebody help

More replies
Relevance 71.75%

I will attach a example but what can I do delete it?

Answer:Please Help I get all my BSoD's are caused by ntoskrnl What can I do?

Please see: http://www.sevenforums.com/crashes-d...tructions.html

9 more replies
Relevance 71.75%

Hi,
I'm facing various BSOD. After I open minidump files via Bluescreenview, it's caused by Ntoskrnl.exe.

Here's the minidump files
Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.

Here's the screenshot of the Bluescreenview :

Please help, Thanks in advance

Answer:Various BSOD Caused by ntoskrnl.exe

CLIFFFLIP-PC-31_01_2016_131456_04.zip

here's the log generated by DM Log Creator

0 more replies
Relevance 71.75%

Hi. I've have been having many BSOD since I bought my computer, and even after completely reformatting twice, they do not stop. I get them occasionally while making videos, on the web, and while playing games. However, the one thing i have noticed that they all have in common is ntoskrnl.exe. I have been reading up on other people that have had problems with it but I still do not have the knowledge to fix it myself.

I have run a Memtest and replaced a faulty RAM card. I have ran it after and passed with no problems.

My specs are :
Windows 7 Professional x64
Thermaltake TR2 PSU
Gigabyte GA-MA785GT-UD3H
DDR3-1333 2 GB x4 Gaming series brand
GeForce GTS 250
X-FI XtremeGamer Sound Card

I have a few plenty of dump files, and bluescreenview to boot.

If there is any extra information I can provide, I would be most happy to upon request.

Thanks again for any help.
 

Answer:BSOD caused by ntoskrnl.

ntoskrnl.exe can be corrupted in a few different ways but seing how you have restored your computer and it still happens It might be because of a short in your keyboard. For some reason it causes ntoskrnl to be corrupt or it could be your boot loader

http://www.computerhope.com/issues/ch000646.htm
 

16 more replies
Relevance 71.75%

I just got a blue screen for the second time this week and I opened blue screen view and it told me the problem is ntoskrnl.exe. How do I fix this? IT usually happens when im on skype but I think it happens when im not too. The attachments have some info. Here is my speccy too http://speccy.piriform.com/results/aZYKZiSk1TEZDG3aZPhKopf

Answer:BSOD caused by ntoskrnl.exe

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 
Louis

17 more replies
Relevance 71.75%

BSODs have been happening for a while but I'm not really sure what's the actual cause.

Answer:BSOD caused by ntoskrnl.exe

Hi Rutame,

The errors are 0x124 WHEA_UNCORRECTABLE_ERROR (Windows Hardware Error Architecture)
This means that there are problems with your hardware, unfortunately this error rarely gives enough information for a specific cause. Fortunately, this error is mostly caused by overclocking or faulty drivers



STOP 0x124 Troubleshooting

Read carefully before proceeding.
   Warning
If you're overclocking your system, revert back to stock clocks now.


   Note
Test the system once the overclock is removed before continuing with the steps outlined below.

Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test



ONE

 CPU TEST

Run Prime95 to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums

   Warning
Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.



TWO

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums


   Note


MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.



THREE

 HDD TEST

Run SeaTools to check the integrity of your HDD. http://www.sevenforums.com/tutorials...s-ho... Read more

1 more replies
Relevance 71.75%

Hi,
I'm facing various BSOD. After I open minidump files via Bluescreenview, it's caused by Ntoskrnl.exe.

Here's the minidump files
Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.

Here's the screenshot of the Bluescreenview :

Please help, Thanks in advance

Answer:Various BSOD Caused by ntoskrnl.exe

Attachment 61672

here's the log generated by DM Log Creator

5 more replies
Relevance 71.75%

Hello all,

I have been recently getting the BSOD while trying to repair my wireless connection. My wireless card keeps going in and out and when I try to use the Windows 7 repair it crashes. I have the 300MBPS Wireless 802.11n PCI Adapter manufactured by Edimax Tech. It is currently disconnected because it was giving me trouble. My RAM and HD are perfectly fine after testing it. I have the SF file and it will be attached. Thank you for your assistance in advance. If there is any more information that I can provide please let me know. Thank you!

-Alan

Answer:BSOD, Caused by ntoskrnl.exe

Hello darkelite. SPTD is present there in your system and causing some issues.

Code:
fffff800`00b9cbd0 fffff880`010d9cc0Unable to load image sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
sptd+0x78cc0
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Alcohol 120% at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Uninstall AVG. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.
Some other very important things are not properly loaded, but those may be caused by eithor or both of the aforesaid things. In the presence of those two, all the mishaps may happen. So let us know the situation after omitting those as suggested. Will decide our further steps depending on the further situation.

9 more replies
Relevance 71.75%

I was running the Steam product Vindictus, which i have had no problems with in the past, when i recieved a BSOD. Checking the dump file, i saw the cause was ntoskrnl.exe. Over the next 4 hours, my computer restarted itself while i attempted to rectify the issue, with no BSOD. I have now updated every driver on my rig, and still receive the same restart, at various intervals when playing Vindictus.I have since ceased to play, and have ran a chkdisk, registry cleanup and full virus scan/virus update with no fix.

Answer:BSOD caused by ntoskrnl.exe

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. You can read more on this error and what to try here... Stop 0x124 - what it means and what to try: Stop 124 - What it means and what to try


Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\USER\Downloads\SF_18-12-2013\121813-48204-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Machine Name:
Kernel base = 0xfffff800`03417000 PsLoadedModuleList = 0xfffff800`0365a6d0
Debug session time: Thu Dec 19 07:58:25.515 2013 (UTC + 6:00)
System Uptime: 0 days 0:00:11.639
Loading Kernel Symbols
.....................................................
Loading User Symbols
Mini Kernel Dump does not contain unloaded driver list
*******************************************************************************
* ... Read more

1 more replies
Relevance 71.75%

 Hey guys, i need help. Every day i have bsod because this driver. Here are specific information about it.Bug check string-IRQL_NOT_LESS_OR_EQUALBug check code-0x0000000aParameter 1-00000001`00000048Parameter 2-00000000`00000002Parameter 3-00000000`00000001Parameter4-fffff800`0313d01fCaused by driver-ntoskrnl.exeCaused by the adress-ntoskrnl.exe+7fd00

More replies
Relevance 71.75%

Hi,
Would really appreciate if someone can help. This started to happen all of a sudden for over a week.
When I shutdown or restart the computer, it shows "Shutting down..." and a spinning wheel for a long time. I usually walk away to do something else. When I come back after a while, it'll show the login screen. After logging in, it'll prompt saying
that my computer has experienced a crash or something like that. Once I stayed through the rebooting process and noticed a flash of BSOD after like 10 minutes of the "Shutting down" message being shown.
Sure enough, Blue Screen Viewer shows many BSODs occurred. Since then, I've tried to restore the system to earlier images that worked for me before. None works after a few rounds of Windows updates. I've also updated all the major drivers on the system.
Again, it doesn't work.
I do have those memory dump files but I'm not sure how to upload one. Here is what I got from OSR Online:


Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18939.amd64fre.win7sp1_gdr.150722-0600
Machine Name:
Kernel base = 0xfffff800`0320e000 PsLoadedModuleList = 0xfffff800`03455730
Debug session time: Tue Aug 25 20:24:31.113 2015 (UTC - 4:00)
System Uptime: 0 days 0:44:17.034
*******************************************************************************
* * ... Read more

More replies
Relevance 71.75%

HI

I bough this Acer V3-571G-9435 laptop on Aug 20, 2012 and replaced the original HDD with OCZ vertex 3 240GB SSD before I star it up. I installed Win7 Home Premium 64 bit version.

Here is the hardware information of the laptop:
CPU: intel i7-3610QM
Memory: Kingston DDR3-1333 2GB & A-Data DDR3-1333 4GB
Graphic card: nVidia GT640M
SDD: OCZ vertex 3 240GB
HDD: Seagate ST9500325AS 500GB 5400 RPM 8MB Cache 2.5" SATA

I have experienced BSOD three times caused by DRIVER_POWER_STATE_FAILURE related with ntoskrnl.exe.

The first BSOD on Aug 24 was probably related with a heavy CPU usage of a crsytallographic computation. I realized one of the eight threads was 100% used for a couple minutes before the crash.

I replaced optical drive with the original HDD on Aug 25 and updated the bios.
Two BSOD happened today and I wonder if they are related with drivers and how to fix them.

Thank you.

Luke

Answer:BSOD caused by ntoskrnl.exe

Welcome
Go to the Nvidia website and update driver
nvlddmkm.sys

4 more replies
Relevance 71.75%

Hello!

I have recurring blue screens on my laptop and can't seem to figure out what's causing them. Sometimes, the computer also freezes completely without any forewarning and the only way to shut it down is to remoce the battery.

I should mention that I had the INTERNAL POWER ERROR in the beginning, but fixed it by updating my AMD driver. Now the error message reads irql_not_less_or_equal. I would be really grateful if someone could guide me to understand if it's caused by drivers or if I should check my RAM.

Thank you in advance!

Answer:BSOD caused by ntoskrnl.exe

Hi Auriga,

Welcome to the 10forums.

The drivers that are blamed in the crashes (latest 2) are from windows, but windows drivers are rarely the real cause.
To find out which driver is causing the crashes we need to find violations


Diagnostic Test

 DRIVER VERIFIER

   Warning
Please make a backup of your important files and get your rescue media or create one.
Please create a restore point.
Please follow this tutorial to run driver verifier.

Some windows drivers are blamed in a few crashes, but that usually means that a 3rd party driver is actually the cause.
Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.


   Note
Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.

1 more replies
Relevance 71.75%

I keep getting BSODs when I play games for a short while. At first I thought it was a bad installation of Windows, so I did a clean format (full) of my SSD and a clean install of Windows 7 Ultimate x64. Installation failed quite a few times before finally succeeding. Tried another copy of Windows 7, same install failures. I finally finished reinstalling Windows 7 on my PC. I suspected the RAM to be at fault so I ran MemTest86+ and found a ton of errors. Upon closer inspection of the BIOS settings, I found that my board was clocking my ram in [Auto] mode at 1333mhz instead of the factory 1600mhz (Corsair Vengeance LP DDR3 @1600 CAS9 on Asus Sabertooth Z77). I updated my BIOS to the latest as of this posting and I still have to manually set the memory frequencies for it to run at 1600mhz.

Everything seemed fine for a few hours running prime95. I supposed my PC was fine now after that clean install of Windows 7, but a few minutes into playing Battlefield 3, I BSOD. I am no pro at reading dump files and I was hoping someone could help me isolate the sources of my BSODs. I've attached the minidump files for each BSOD below. Thanks!

Answer:BSOD when playing games. BlueScreenView says ntoskrnl.exe caused BSOD

My system specs are:

Intel Core i7-3770
Asus Sabertooth Z77
Corsair Vengeance Low Profile DDR3 @1600mhz CAS9
Kingston HyperX 3k 120GB SSD (boot, Battlefield 3, Microsoft Office)
Asus DirectCUII GTX 670
Thermaltake Toughpower 1200 watt
Razer Blackwidow Ultimate
Cyborg RAT7 Mouse

4 more replies
Relevance 70.93%

Hey guys! First time poster, long time lurker here.

The last couple of days I've been ravaged by BSODs. I did a memtest and found out that I had a bad ram stick. I replaced the ram stick and did a clean install of Windows 7 Home Premium x64 and installed my drivers as well as Avast! Antivirus.

I am still getting BSODs, I did another memtest on my new ram together and individually and both sticks tested fine. One of the dump files mentioned Avast! as the issue. After some trouble (2 BSOD releating to Avast!) I was able to uninstall it in Safe Mode. I then proceeded to install Panda Antivirus and had similar issues with it, so I have since uninstalled that antivirus as well. Right now I am using Windows Security Essentials until I can figure out what is causing my BSODs.

The BSODs seem to be happening randomly, but can be triggered faster by me opening launching the "World of Warcraft" launcher.

I have my DM Logs attached to this forum. Thanks in advance for any help that you can give!

Answer:BSOD IRQL_NOT_LESS_OR_EQUAL caused by ntoskrnl.exe

Hello and welcome Mc Large mate run these for starters

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html < use the /f and /r options in Option2 if necessary

http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/

http://www.bleepingcomputer.com/download/adwcleaner/

download from bleeping computer ? delete any rubbishthese find.
the firs two can be done in safe mode if you have to

3 more replies
Relevance 70.93%

Hi,

I have a friend who is using Windows XP Service Pack 3 is having a random BSOD error.

From the crash dump file, the report stated this error: Probably caused by : ntoskrnl.exe ( nt+cc548 ).

I do not know what have caused this issue and the system is recently formatted.

It is Dell Optiplex 755 PC with ATI Radeon HD2400 graphic card. Service Tag: FF55V1S

The link for the minidump file: http://cid-2e6fca317368a8f0.office.live.com/self.aspx/Public/Mini012511-01.dmp

Would appreciate any kind assistance.

Thank you very much.

Answer:Probably caused by : ntoskrnl.exe ( nt+cc548 ) BSOD

Download BlueScreenView:
http://www.nirsoft.net/utils/blue_screen_view.html
unzip downloaded file and double click on BlueScreenView.exe to run the program.
when scanning is done, go to EDIT - Select All
Go to FILE - SAVE Selected Items, and save the report as BSOD.txt
Open BSOD.txt in Notepad, copy all of the content, and paste it into your next reply

5 more replies
Relevance 70.93%

Having seen other help from this forum I thought I'd post my problem and see if you guys could help me out.

I just built my girlfriend's PC a few days ago, all was well but now a BSOD appears randomly, so after using BlueScreenView on the dump files it all originates from one driver.

The PC in questions specs are almost identical to my own (minus the 1TB HDD and her MOBO is the Rev 3.1 version of the same MOBO).

I've attached a copy of the dump files to this post if that helps anyone.
I've already tried chkdsk which gave no errors.

Thanks in advance

Answer:BSOD Caused by Driver ntoskrnl.exe

Sorry to hear about the BSODs. Please follow the instructions below:

http://www.sevenforums.com/crashes-d...tructions.html

4 more replies
Relevance 70.93%

Approximately a week ago I decided to overclock a bit my CPU. I did everything according the manuals and the internet knowledge. Sadly yesterday I had a persisting problem - when I was turning on the computer my monitor didn't wake up from standing by mode. Fix for that was restart which was bringing everything back to normal. Today I experienced major problem when was listening to music on iTunes. Appeard BSOD. Loading bios defaults didn't work. It seems that something is corrupted.
Below I paste my crash dump file. 123114-26551-01.dmp - Speedy Share - upload your files here
Also FYI, temperatures were monitored and everything was alright - CPU -+ 45*C in stress, GPU 71*C in stress.
Here are my specs: Asus P5K C2D 7300 @ 3.0 ghz, vcore 1,28V OCZ Platinium Rev. 2 4GB 800mhz 4-4-4-15 vcore 2.1V Seagate 7200.10 320GB Chieftec GPS-450A
I will be really grateful for your support, because it is the second time this year, even though I changed my cpu.

Answer:BSOD BCCode 50, probably caused by ntoskrnl.exe

The first step would be to reverse the changes on overclocking the CPU to Defaults.
The next thing would be to run Check Disk. go to Start/Search and type CMD, Right click the CMD results and Run As Administrator. In the Elevated Command Prompt type chkdsk /R and press enter. Now type a Y for Yes and restart the computer. Check Disk will start at next bootup and may take a while.
If you continue to have problems, please click on this link and post in that section of the forum Blue Screen of Death (BSOD) Posting Instructions - Windows 10, 8.1, 8, 7 & Vista

1 more replies
Relevance 70.93%

Hi All,

I have found multiple helpful answers on this forum regarding similar situations yet none that seems to apply to mine specifically.

Though I'm sure my dumps will be more helpful than I could ever be, here's what I noticed:

1. the installation of a new external drive (hp 2TB) seems to increase bsod occurences

2. there seems to be a problem with how my ram is getting used as I can always predict a crash when I go past 9 gig (out of 16).

3. I also read a post which suggested to remove Kaspersky. I'm not using it yet I do have BidDefender running.

I did run Windows Memory Diagnostics which didn't find any problems.
Thanks for your help as I've wasted 2 days with no results whatsoever on my own...

Seb.

Answer:BSOD which seems to be caused by IRQL_NOT_LESS_OR_EQUAL and ntoskrnl.e

Hi -

Please run - BSOD Posting Instructions

Regards. . .

jcgriff2

9 more replies
Relevance 70.93%

I have already performed a complete restore twice and have run all the necessary Windows updates and I am still receiving the following STOP errors:

0x0000001e
0x00000024
0x0000003b

OS - Windows 7
x64
Original installed OS
OEM version
5 months old
I re-installed the OS for the second time about a week ago
AMD Phenom II N830 Triple Core Processor
AMD M880G with ATI Mobility Radeon HD 4250
Ran EVEREST and it said my motherboard name is "Unknown"
HP 608425-002 65W

Thank You

Answer:BSOD Caused By NTFS.SYS and NTOSKRNL.EXE

Hi -

NIS/ N360 named in one BSOD. I suggest removal.

NIS/ N360 Removal -- sysnative.com MVP

HDD and/or RAM appears to be an issue.

- Run chkdsk /r
- Run HDD diags - http://www.techsupportforum.com/2828431-post7.html
- Run memtest86+ - http://www.techsupportforum.com/2863029-post5.html

Windbg Logs
--> http://sysnative.com/bsod2011/jcgrif..._jcgriff2_.txt
--> http://sysnative.com/bsod2011/jcgrif...riff2_.txt.zip

Regards. . .

jcgriff2


`


BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sun Jan 23 20:49:42.312 2011 (GMT-5)
System Uptime: 0 days 0:09:10.247
Probably caused by : ntkrnlmp.exe ( nt!KipFatalFilter+1b )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x1E
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_0x1E_nt!KipFatalFilter+1b
Bugcheck code 0000001E
Arguments ffffffff`c0000005 fffff880`03cdffd0 00000000`00000000 00000000`00000000
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sun Jan 23 20:40:08.802 2011 (GMT-5)
System Uptime: 0 days 0:03:03.737
*** WARNING: Unable to verify timestamp for SRTSP64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SRTSP64.SYS
Probably caused by : Ntfs.sys ( Ntfs!NtfsNonCachedIo+23f )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: svchost.exe
BUGCHECK_STR: 0x24
... Read more

3 more replies
Relevance 70.93%

I have faced a BSOD for days when waking the laptop up from sleep, and then it takes 15 minutes to start up. Refreshing and resetting do not solve the problem. I have attached the SF zip file The crashes are usually caused by:

On Tue 1/21/2014 3:10:37 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\012114-271484-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14DCA0)
Bugcheck code: 0x9F (0x3, 0xFFFFE000007CF880, 0xFFFFD0002052A840, 0xFFFFE0000A67F250)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

Occasionally it's caused by:

crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x9F (0x3, 0xFFFFE00000FAF060, 0xFFFFD00020723840, 0xFFFFCF81790D0D30)
Error: DRIVER_POWER_STATE_FAILURE

And only once:
On Mon 1/20/2014 8:25:59 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\012014-273609-01.dmp
This was probably caused by the follow... Read more

Answer:Many BSOD's caused by: ntoskrnl.exe (nt+0x14DCA0)

Intel Rapid Storage sucks, remove it via Control Panel\All Control Panel Items\Programs and Features.

3 more replies
Relevance 70.93%

I would appreciate some help please. I have a Sony VAIO VPCSB. This is my work laptop, and was working fine until I decided to set up and alternative user account for home use. As part of this process I restored a backup of files from my previous laptop (just docs and pictures). I changed a load of settings to be how I like them and installed a few of my favorite programs. During this process windows also shut down to install updates.

Now, when I leave the PC to idle, I get the attached BSOD. I am wondering whether it is related to to the laptop going into sleep mode as I have set it to after an hour in the power management settings.

The most recent BSOD was whilst Windows was shutting down to install some more updates, and as such it rolled back to before the update.

First time I have posted here, hope this info is sufficient to get started.

Thanks in advance.

Answer:BSOD DRIVER_POWER_STATE_FAILURE caused by ntoskrnl.exe

Hi and welcome to the forums






Quote:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000009F, {4, 258, fffffa80042e2b50, fffff80000b9c3d0}
Unable to load image \SystemRoot\system32\DRIVERS\GenHC.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for GenHC.sys
*** ERROR: Module load completed but symbols could not be loaded for GenHC.sys
Probably caused by : GenHC.sys ( GenHC+f91e )
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.


Problem driver: GenHC.sys

Relating to: Logilink usb network server driver

Timestamp: Tue Oct 06 04:11:35 2009 (4ACAB567)
Please update the outdated driver found here:






Quote:
http://www.logilink.eu/content/support/download.htm?seticlanguage=en







Quote:
fffff880`0ebe34b8 fffff880`04c74620Unable to load image \SystemRoot\System32\Drivers\aswSP.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSP.SYS
*** ERROR: Module load completed but symbols could not be loaded for... Read more

6 more replies
Relevance 70.93%

This is a little over a week old computer and I've had nine BSODs since I got it. Using BlueScreenView tells me that ntoskrnl.exe is the cause. I have no idea what the means... BCCode f9. I'm wondering if it has something to do with my mouse since sometimes after the crash my mouse won't work. But there have been days I've used my mouse for hours and never had a problem... Hopefully I ran the diagnostic tool correctly and someone here can tell me what the problem is.

Oh, and I also completely uninstalled and then reinstalled my video card driver last Wednesday after two BSODs. Had two back to back BSODs today, none in between.

My system:
Mythlogic Pollox 1413
nVIDIA GTX 765M
Intel Core i7-4700
8gb RAM (two 4GB sticks)
Windows 7 64bit

All up to date.

Answer:BSOD, BCCode f9, Caused by ntoskrnl.exe

Code:
IMAGE_VERSION: 6.1.7601.18251

FAILURE_BUCKET_ID: X64_0x9F_3_IMAGE_usbhub.sys

BUCKET_ID: X64_0x9F_3_IMAGE_usbhub.sys

ANALYSIS_SOURCE: KM

FAILURE_ID_HASH_STRING: km:x64_0x9f_3_image_usbhub.sys

FAILURE_ID_HASH: {ec46ebd8-431a-da69-d1c8-e27212f72a5c}

Followup: MachineOwner
---------

0: kd> lmvm usbhub
start end module name
fffff880`05eb4000 fffff880`05f0e000 usbhub (pdb symbols) c:\symbols\usbhub.pdb\037DF7A248D4468EB53CC2809E03ED871\usbhub.pdb
Loaded symbol image file: usbhub.sys
Mapped memory image file: c:\symbols\usbhub.sys\5227239A5a000\usbhub.sys
Image path: \SystemRoot\system32\drivers\usbhub.sys
Image name: usbhub.sys
Timestamp: Wed Sep 04 21:42:10 2013 (5227239A)
CheckSum: 00056519
ImageSize: 0005A000
File version: 6.1.7601.18251
Product version: 6.1.7601.18251
File flags: 0 (Mask 3F)
File OS: 40004 NT Win32
File type: 2.0 Dll
File date: 00000000.00000000
Translations: 0409.04b0
CompanyName: Microsoft Corporation
ProductName: Microsoft? Windows? Operating System
InternalName: usbhub.sys
OriginalFilename: usbhub.sys
ProductVersion: 6.1.7601.18251
FileVersion: 6.1.7601.18251 (win7sp1_gdr.130903-1532)
FileDescription: Default Hub Driver for USB
LegalCopyright: ? Microsoft Corporation. All rights reserved.
0: kd> !drvobj fffffa8014213a10... Read more

9 more replies
Relevance 70.93%

I keep getting repeated BSOD after fresh install of Windows 10. I originally reinstalled because my computer was running really slowly and nothing else was working, so I reinstalled my OS. Most of them have been SYSTEM_SERVICE_EXCEPTION or SYSTEM_THREAD_EXCEPTION_NOT_HANDLED, mostly caused by ntoskrnl.exe. I have tried updating most of my drivers and have posted to other threads, and a user on Tom's Hardware lead me here. Thanks for any help that anyone can give.

Answer:BSOD Usually while playing GTA V, caused by ntoskrnl.exe

Hi brandonium10,

Unfortunately, there are issues with symbols and we have to wait for Microsoft to fix them.

However, the BSODs are all over the place + since you state that a reinstall doesn't help it is obvious that a hardware issue is present.

Please run all below tests.
Please note, if you have any question about any test below, many questions that are asked are answered in the tutorials, read them carefully and if you still have a question after reading please do not hesitate to ask


STOP 0x124 Troubleshooting

Read carefully before proceeding.
   Warning
If you're overclocking your system, revert back to stock clocks now.


   Note
Test the system once the overclock is removed before continuing with the steps outlined below.

Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test



ONE

 CPU TEST

Run Prime95 and/or IntelBurnTest to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums & CPU - Stress Test Using IntelBurnTest - Windows 7 Help Forums

   Warning
Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.
Make a photo of the result and post it.



TWO

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums


   Note


MemTest86+ needs to be ... Read more

0 more replies
Relevance 70.93%

Goodevening people,

I have been getting a lot of bluescreens the last week.
Only today, i've had:
- Three IRQL_NOT_LESS_OR_EQUAL screens, two caused by ntoskrnl.exe, the last one caused by avast.
- Two SYSTEM_SERVICE_EXCEPTION screens, all caused by ntoskrnl.exe
- One ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY screen, also caused by ntoskrnl.exe
- One IRQL_GT_ZERO_AT_SYSTEM_SERVICE screen, also cause by ntoskrnl.exe

I'm using Windows 7 Enterprise SP.

The latest .dmp file contained the following:


Code:
Microsoft (R) Windows Debugger Version 6.3.9600.17336 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Maarten\Desktop\050815-9906-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: ... Read more

Answer:All kinds of BSOD caused by ntoskrnl.exe

Various different BSODs are there, within a short time span. Which indicates to some sort of memory issue.

Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the result. We have to do some further things depending on it.

9 more replies
Relevance 70.93%

Hello,
I'd like to thank you in advance for your time and effort.

I was recently forced to purchase new MB and added a CPU and graphics card while I was at it. I keep getting these BSOD only while gaming (Lord of the Rings Online) and a few while trying to run Driver Verifier (I think I missed the point of this somehow).

I did my best to follow the instructions for BSOD posts. Please let me know if anything is missing.

OS - Windows 7 x64
?What was original installed OS on system? OS - Windows 7 x64
?Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Full retail
? Age of system (hardware) Just installed new MB, Graphics Card, and CPU. SSD and Memory < 1year
? Age of OS installation - have you re-installed the OS? Yes, <1yr

? CPU Intel i7- 3.5GHz
? Video Card GeForce GTX780
? MotherBoard ASUS Sabertooth Z87
? Power Supply - brand & wattage Not sure, Oldest component in chassis. Had no problems prior to hardware upgrade

? System Manufacturer Custom
? Exact model number (if laptop, check label on bottom)

Laptop or Desktop? Desktop

More replies
Relevance 70.93%

I am assisting a friend with his computer. He states that he will be using the computer and all is well, then he will get up to go do something, i.e. put his daughter to bed, eat dinner etc. On returning to the computer he finds it off and a message saying there was an error. He didn't give me too many details.

I looked at his error log; it's showing 41 critical errors related to Kernel-Power (EventID 41). That prompted me to get BlueScreenView to look at the .dmp files; it's showing 50 of them from Sep, 10-today. There is clearly a problem, and I feel like it may be the memory, but I am not extremely experienced in analyzing BSOD errors, so I came here.

The specs of the system are as follows:
-Windows Professional 64-bit
-Gigabyte GA-Z97X-UD5H Motherboard
-Intel Core i7-4790k
-32 GB of Corsair Vengeance DDR3-1600 (I remember now he bought 2 16GB(8x2) sets on accident)
-2x WD2003FZEX 2 TB HDD's
-1x Samsung 850 Pro 512GB SSD
-Nvidia Quadro K2200
-EVGA Supernova NEX750G

More replies
Relevance 70.93%

Hi,

I built a new computer a few months ago and I have recently been getting random hangs/freezes on my computer where nothing responds and I have to turn power off/on again. I did a fresh install of windows to try and sort things out but now i've been getting random BSOD instead. There's no pattern to them and they could happen at any point.

BlueScreenView says from the dmp's that the driver causing it is ntoskrnl.exe which seems to have many possible hardware/driver causes.

I ran memtest for 13 hours and that came back with 0 errors so I don't think its my RAM.

If anyone could look at my dmps to try and give me more of a clue of whats causing this problem I would be very grateful

Answer:Random BSOD caused by ntoskrnl.exe

bump

1 more replies
Relevance 70.93%

Hello, this is my first time posting in a forum such as this so please forgive me for any fault in etiquette.

My issue is that my laptop has been continuously crashing with BSOD errors for seemingly no reason. My original configuration was in windows 8.1 and started experiencing repeated crashes after I received the laptop back from repairs (Keep in mind it is only 1 year old, though now out of warranty). I wiped the OS and installed a fresh copy of Windows 7 Ultimate (ive been meaning to do this for a while, and the errors were all the encouragement i needed).

Despite installing all windows updates, lenovo updates and checking all drivers these BSOD errors continue to occur. I cant even begin to narrow down on the issue as i feel like ive experienced every error type there is. The list is currently at;
UNEXPECTED_KERNAL_MODE_TRAP
PAGE_FAULT_IN_NONPAGED_AREA
IRQL_NOT_LESS_OR_EQUAL
DRIVER_IRQL_NOT_LESS_OR_EQUAL
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
SYSTEM_PTE_MISUSE
KMODE_EXCEPTION_NOT_HANDLED

i have included the dump information from bluescreenview and CPU-Z computer information for reference. Please let me know if there is anything else i need to provide.

Thank you for any help, I am in dire need of assistance as i have an honors thesis to complete in a few weeks and my only other computer is a mac with a corrupted battery!

Answer:Multiple BSOD's caused by ntoskrnl.exe, help!

Additional information is required.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

9 more replies
Relevance 70.93%

Dear All,

I recently upgraded to Windows 10 Pro from 7 Pro and facing problem of BSOD, attached are minidumpts captured from my system for different dates.

Please can any one help me on this to resolve it. Really making problem for me and I am unable to figure out the root.

Waiting for help.

Regards,
Wajeeh

Answer:BSOD caused by driver ntoskrnl.exe

Hello, any body out there to help

0 more replies
Relevance 70.93%

Hello,I just can't get rid of these blue screens and quite honestly they are driving me insane.I returned my other 500GB hard drive that I was having some problems with a few days ago so now im stuck on this single 150gb one.I was hoping that if I ran applications from the healthy 150gb hard drive my problems will go away.They didn't.I also bought new rams but they were set on 800MHz frequency but they are certified for 1066 so I manually overclocked them.My problems persisted.I changed my ram voltage manually too.No luck.So now I decided to leave it on all its stock settings.Still getting blue screens.Just recently I have discovered that almost all my bsod-s are caused by ntosknl.exe which would explain why blue screens have started when I installed windows 7(I had no blue screens on xp for more than 3 years).I have found this hotfix and installed it hoping to get rid of blue screens:http://support.microsoft.com/kb/979444/en-us
But no,they are still here.So now im pretty sure that im out of options.Blue screens mostly occur when im unraring some files,playing games or doing anything that eats up my pc resources.If you don't have any solutions im just going to go back to xp since everything worked fine then.I have used WhoCrashed to analyze my crash dumps and in every single one of them error is KMODE_EXCEPTION_NOT_HANDLED and the module that is causing it is ntoskrnl.exe so now im pretty convinced this isn't hardware related.
Cheers and thanks

Answer:[SOLVED] BSOD caused by ntoskrnl.exe

Hi -

ntoskrnl.exe = the Windows NT Kernel & Executive. It a default listed when no other probable cause of a BSOD can be found.

The bugcheck on both BSODs were the same -

0x1e (0xc0000005,,,) = kernel threw an exception - 0xc0000005 = memory access violation

These 2 drivers are a problem - sptd.sys is known to cause BSODs in Windows 7 & Vista; the second is way too old for Windows 7 RTM -

Code:
sptd.sys Sun Oct 11 16:55:14 2009 (4AD24632) - Daemon/ Alcohol

RTCore64.sys Wed May 25 02:39:12 2005 (42941D90) - Riva Tuner
Remove Daemon Tools/ Alcohol 120.

Remove Riva Tuner.

If BSODs persist, run the Driver Verifier -- http://jcgriff2.com/driver_verifier.htm


Windbg Logs
--> http://jcgriff2.net/BSOD_Logs/_99-db..._jcgriff2_.txt
--> http://jcgriff2.net/BSOD_Logs/_99-db...riff2_.txt.zip

Regards. . .

jcgriff2


`

BSOD BUGCHECK SUMMARY

Code:
Built by: 7600.20738.amd64fre.win7_ldr.100618-1621
Debug session time: Sun Oct 17 07:59:49.393 2010 (GMT-4)
System Uptime: 0 days 0:58:47.893
Probably caused by : ntkrnlmp.exe ( nt!KiDispatchException+1b9 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x1E
PROCESS_NAME: csrss.exe
Bugcheck code 0000001E
Arguments ffffffff`c0000005 fffffa80`05efb1d0 00000000`00000000 00000000`05fbd060

??????????????????????????????????????????????????????????????????????????????????????``

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sat Oct 16 19:57:04.558... Read more

1 more replies
Relevance 70.93%

Hi.
This suddenly became an issue and I'll get a reboot at least once a day, often more. Any ideas? Nothing in particular seems to trigger it (that I can tell).

Thanks in advance...

Answer:BSOD DRIVER_POWER_STATE_FAILURE caused by ntoskrnl.exe

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

This driver, Driver Reference Table - stdcfltn.sys, is causing the crashes.
You'll need to check Dell or Windows Updates for possible driver updates, I cannot find any nor what it exactly relates to.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7F, {8, ffffd00161b1ab30, ffffd00163213fc0, fffff803f707c30d}

*** WARNING: Unable to verify timestamp for stdcfltn.sys
*** ERROR: Module load completed but symbols could not be loaded for stdcfltn.sys
Probably caused by : storport.sys ( storport!RaUnitStartIo+266 )

Followup: MachineOwner
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************... Read more

1 more replies
Relevance 70.93%

So my Windows 7 Ultimate started bugging out of me a couple days ago. Problem first started right after an windows update I believe, and originally presented as no desktop loading after log on, only a black screen with a cursor. Restored, ran chkdsk and repair and they problem disappeared but now these unexpected crashes keep popping up. Have never actually seen the BSOD yet, computer is always rebooted when I come back to it. Here's the skydrive link for the mini dumps:
https://skydrive.live.com/redir?resi...EfroJFd3UMxyxk
Thanks for any help!

Answer:BSOD Randomly Caused by ntoskrnl.exe

Welcome

Look for an update on your Synaptics Touchpad Driver

Code:
>[ 16, 2] 0 e1 fffffa8007c874b0 00000000 fffff80002ec5ce0-fffffa800963e970 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\SynTP.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SynTP.sys
*** ERROR: Module load completed but symbols could not be loaded for SynTP.sys
\Driver\SynTP nt!IopUnloadSafeCompletion
Args: 00014400 00000001 00000004 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800a569450

Args: 00000000 00000000 00000000 00000000
0: kd> lmvm SynTP
start end module name
fffff880`04840000 fffff880`048a7000 SynTP T (no symbols)
Loaded symbol image file: SynTP.sys
Image path: \SystemRoot\system32\DRIVERS\SynTP.sys
Image name: SynTP.sys
Timestamp: Fri Oct 14 08:34:52 2011 (4E979FCC)
CheckSum: 00060FAA
ImageSize: 00067000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Source:Driver Reference Table
SynTP.sys Windows process - What is it?

Get the latest drivers for your Intel Graphics driver

Code:
fffff880`033e7648 fffff880`04cab048Unable to load image \SystemRoot\system32\DRIVERS\igdkmd64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
igdkmd64+0xa9048
Source: Intel Down... Read more

1 more replies
Relevance 70.93%

Hi,

Last year I bought a new computer (desktop pc which I build myself) and ever since then I have had random occurrences of BSOD. Sometimes it take 4-6 weeks before it happens and some times it can occur several times in one week. I have done some memory, graphics and cpu tests without succeeding to reproduce BSOD myself.

I have also used Windows verifier to check the drivers and they do produce BSOD but these differs from the regular ones that occurs randomly, this I have noticed with the Windows program WhoCrashed. According to WhoCrashed those random BSOD has something to do with ntoskrnl.exe. Here is the output from an analyse from Whocrashed of one of my dumpfiles:

On Tue 2015-11-03 20:09:21 GMT your computer crashed crash dump file: C:\Windows\Minidump\110315-5038-01.dmp This was probably caused by the following module: ntoskrnl.exe (nt+0x74200) Bugcheck code: 0x50 (0xFFFFF6FC5262D000, 0x0, 0xFFFFF800032F0700, 0x9) Error: PAGE_FAULT_IN_NONPAGED_AREA file path: C:\Windows\system32\ntoskrnl.exe product: Microsoft? Windows? Operating System company: Microsoft Corporation description: NT Kernel & System Bug check description: This indicates that invalid system memory has been referenced. This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

What causes this? Is it a hardware fault or ... Read more

Answer:Random BSOD probably caused by ntoskrnl.exe

BSOD Posting Instructions

1 more replies
Relevance 70.93%

Hello, a month or so ago (just couple of months after I bought a new PC, pretty decent\expensive for my country) I started to experience a lot of BSODs, only at the time I started any game or any video file. Sometimes I could play for 3-4 hours or watch a video, sometimes it crashes 1-2minutes after I start a game. It works fine while I keep browsing internet in Mozilla though. First I thought my main drive - SSD crashed - we unplugged it and tried to work on my older HDDs (which I kept from my old PC). Same problem. We re-installed Windows multiple times, it kept showing the problem. Usually it does not start right after some new action was taken - like If I change HDD and install a new windows here, a day, two, maybe 3 it works ok with no BSODs at all. BlueScreenView shows mostly always (cant recon a different result) a problem with ntoskrnl.exe.
Once I thought my memory was an issue, but 4-5 circles of Memtest86 didn't show any problems at all.
I run the latest drivers for my graphics card (nvidia geforce gtx 560 ti) and I don't know wheter my video card can cause the problem. What I know is thats its definetely not the HDD or probably my memory, so I can only think about motherboard or graphics card problems.
And to be clear at first my PC just got stuck in games and I had to reboot it, sometimes graphics in games crashed (like flashing, or everything was very smooth(blur), sorry for my english), and a week or two after it started to give me BSOD all the time in games\vid... Read more

Answer:multiple BSOD caused by ntoskrnl.exe

Minidumps have been created they are referenced in your copy/paste logs there.
Could you follow these.

http://www.sevenforums.com/crashes-d...tructions.html

9 more replies
Relevance 70.93%

Hey everyone, after checking these forums for some time now, I decided to finally post my problems and get some help.

I got my pc about 2 weeks ago, and ever since I got it, almost always there is a BSOD on boot, but after that I am able to use it just fine.. it has just gotten sort of frustrating. I even did a system reset, but that did not work at all.

I would gladly appreciate it if somebody could help me out, and if I forgot to include anything else, please tell me

Answer:I always get a BSOD on boot, caused by ntoskrnl.exe

0x0000000A error is IRQL_NOT_LESS_OR_EQUAL. I saw that you had multiple dump files; I checked the more recent ones. You must check that your computer is compatible with Windows.

I would advise you to run sfc /scannow; I don't really know much about BSODs, but that command is very helpful for problems related to software.

Well, I think that software is the problem here; try the command I gave you and see what will happen. Most likely you have a faulty device driver, system service, or BIOS. If this is the case, press F8 while Windows is booting. This will show you the Advanced Boot Options menu. Select "Last Known Good Configuration".

In case you have an incompatible device driver, system service, virus scanner, or backup tool, run the system diagnostics of your computer manufacturer (especially the memory one). For details on these procedures, see the owner's manual for your computer. If your system has small computer system interface (SCSI) adapters, contact the adapter manufacturer to obtain updated Windows drivers. Try disabling sync negotiation in the SCSI BIOS, checking the cabling and the SCSI IDs of each device, and confirming proper termination. For integrated device electronics (IDE) devices, define the onboard IDE port as Primary only. Also, check each IDE device for the proper master/subordinate/stand-alone setting. Try removing all IDE devices except for hard disks.

If your computer is fine, let us know. If it is not, we will try to give you as muc... Read more

5 more replies
Relevance 70.93%

Hello, earlier today I had two BSODs, pretty much minutes after each other. I have no idea what's causing them, but I've dug out two .dmp files that's attached to the post. I hope that you're able to help me :)

Cheers,

~ Denieru

Answer:BSOD, Probably caused by: ntoskrnl.exe ( nt+1509a0 )

Sorry for the delay in responding. There just aren't that many people who do BSOD analysis, so at times we get a bit overwhelmed!

Do you still need help with this problem?
I will be notified if you reply to this topic and will respond within 48 hours.

10 more replies
Relevance 70.93%

After I changed hard drive to Kingston SSD and reinstalled Windows 7 x64 with all new updates I start having BSOD every several days randomly, one time even during sleep mode, wake up was fine, but without previously loaded programs and one time on wake up.
All drivers are the same as it was before, when everything was stable. SSD doesn't require any drivers according on their website.
I uninstall some Windows security updates, which I read can cause BSOD, but it doesn't help. BlueScreenView is showing, that the reason is ntoskrnl.exe, but it is Windows file, so not clear where to search the reason.

Any help would be very much appreciated.
Thank you

More replies
Relevance 70.93%

Hello guys, for one more times i have a problem with Blue Screens. FFS i have made 2 more topics before some time but the problems still occur. @Arc helped me out but i still have problems dont know what to do. Need a permanent solution. I got some dumps manually because my system deleted any file that is in the Minidump folder.
Please help me out!!
Notice: Check my dumps too !! (Couldn't upload it here) https://www.dropbox.com/s/9p83p0xyey2rq51/More%20Dumps%20by%20ME.zip

Answer:Random BSOD caused by ntoskrnl.exe and other...

Hi PadeLee.

I worked two times with your BSOD issues earlier.
During last October, it was ESTE that caused the BSOD.
During last December, It was MotionInJoy.
So the issues are always different, and not any continuation to each other. Unfortunately we cannot predict which software/driver will bug out and when.

Same this time. Now it is Microsoft LifeCam.

Code:
BugCheck 9F, {3, fffffa800a708060, fffff80000b9c3d8, fffffa800a6dc010}

*** WARNING: Unable to verify timestamp for VX1000.sys
*** ERROR: Module load completed but symbols could not be loaded for VX1000.sys
Probably caused by : VX1000.sys

Followup: MachineOwner
---------
Which is very old.

Code:
fffff880`07e02000 fffff880`07ffc000 VX1000 T (no symbols)
Loaded symbol image file: VX1000.sys
Image path: VX1000.sys
Image name: VX1000.sys
Timestamp: Tue Apr 28 07:25:28 2009 (49F66210)
CheckSum: 001FB42B
ImageSize: 001FA000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Search for possible updates in Software Downloads: LifeCam VX-1000

Also, as it appears to be a custom built (on Gigabyte GA-970A-D3 motherboard), Disable hibernate.

Let us know the results.

Edit: If you want a permanent solution, do it, following every step properly:
Clean Reinstall - Factory OEM Windows 7

9 more replies
Relevance 70.93%

Good Day!

Please is there anyone who can help solve this problem?
My computer is automatically shut down and after starting im seeing report

Bug Check Code : 0x00000124
Parameter 1 : 00000000`00000000
Parameter 2 : fffffa80`083688f8
Parameter 3 : 00000000`00000000
Parameter 4 : 00000000`00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+4b2aec
File Description : NT Kernel & System

Motherboard:GA-F2A55M-Ds2 (rev.3) fm2+/fm2
Processor: AMD KAVERI A10 7850K 3.70GHZ
RAM: HYPER X FURY 8GB (2X4) 1866MHZ
GRAPHICS CARD: RADEON R7 250 1GB GDDR5 WITH BOOST
PSU: POWER FUL 600W
OS: WINDOWS 7 ULTIMATE 64 BIT
Drivers:all are updated
(Dual Graphics Enabled)

I've already run:
memtest86 test 13 no errors
sfc /scannow
chkdsk
malwarebytes scan

DM log collector
Attachment 365283
dmp file
Attachment 365285

Answer:BSOD Caused By Driver : ntoskrnl.exe

Please help
Thank you

6 more replies
Relevance 70.93%

Hi,

I just moved, this weekend from a HDD to a SSD and installed a watercooling for my CPU. After cloning my disk, I had multiple BSOD, so I decided to use the MediaCreationTool.exe to do a new clean install. But I'm still getting BSOD. It happens quite randomnly (twice during the login screen, the last BSOD).

Thanks for your help.

AUGUSTIN-PC-14_04_2017_165059,93.zip

Answer:BSOD caused by ntoskrnl.exe and ndis.sys

I just had two new BSOD. WhoCrashed:

Code:
On Sat 15/04/2017 00:33:37 your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF801A78491B4, 0xFFFFC681C9086C00, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

On Fri 14/04/2017 23:55:00 your computer crashed
crash dump file: C:\Windows\Minidump\041417-14015-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x16BF70)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF803706C61B4, 0xFFFFDE00C3C6E850, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this probl... Read more

2 more replies
Relevance 70.93%

I recently built a new computer with hardware:

Gigabyte GA-F2A68HM-DS2 (rev 1.0)
AMD A10-7970k R7
CORSAIR DDR3 8GB - CMZ8GX3M1A1600C10

Running Win8.1 Pro 64 bit
I had initially installed Windows 10 Education but it was giving me a whole lot of errors (all drivers installed and updated) mostly with "probably caused by: ntoskrnl.exe" and most often appeared when playing Minecraft.

I've now installed Win 8.1, hoping that might solve my problems. But I still get the same errors - though they are less frequent and more randomly (not really related to minecraft now).

I've run a virus check, memory diagnostic, system repair, but nothing has relaly helped. Any clues?

(Dump files from Win8.1 are attached)

Answer:BSOD - probably caused by: ntoskrnl.exe ( nt+14e8a0 )

BSOD Posting Instructions

2 more replies
Relevance 70.93%

Hi,

I've been trying to find out why I'm getting all these blue screens today. Lately I've been getting a lot of malware and virus from the internet and I've removed them but they keep coming back and now I started getting the blue screen and I thought it was because of it. I've run my anti virus scan and malware scan but every time I start up my computer, I get the blue screen once I get to my desktop. I can't turn on my computer at all without getting the blue screen expect in safe mode. I'm in safe mode right now and I found out that I'm getting these blue screens from ntoskrnl.exe and volmgr.sys.

I'm running on Vista x64 bit with the original OS installed. OEM and I've had my computer for about 2 years and never re-installed in the OS.

I wasn't able to run a system health report but I do have the Windows_NT6_BSOD_jcgriff2 folder.

I could really use some help. Thanks!

Answer:BSOD caused by ntoskrnl.exe and volmgr.sys

STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION Usual causes: System service, Device driver, graphics driver, ?memory






Code:
icrosoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\richc46\AppData\Local\Temp\Temp13_Windows_NT6_BSOD_jcgriff2[1].zip\Windows_NT6_BSOD_jcgriff2\Mini012911-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 6002.18267.amd64fre.vistasp2_gdr.100608-0458
Machine Name:
Kernel base = 0xfffff800`01e06000 PsLoadedModuleList = 0xfffff800`01fcadd0
Debug session time: Sat Jan 29 21:07:49.987 2011 (GMT-5)
System Uptime: 0 days 0:01:29.846
Loading Kernel Symbols
...............................................................
................................................................
...........
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
****... Read more

1 more replies
Relevance 70.93%

On win 7 x64, on differents machines HP8100 SFF, DC7800SFF, I get randomly BSOD, all caused
by the file ntoskrnl.exe.
As attach the diagnostic results file on a HP8100.
I think it is a driver issue (old version? incompatible?)
Thanks for your analyse.

Answer:BSOD - multiple caused by ntoskrnl.exe

Code:
BugCheck 3B, {c0000005, fffff80002ad9e57, fffff880076dea10, 0}

Probably caused by : memory_corruption ( nt!MiPfnShareCountIsZero+77 )

Code:
Usual causes: System service, Device driver, graphics driver, memory

Code:
1: kd> !error 00000000c0000005
Error code: (NTSTATUS) 0xc0000005 (3221225477) - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
memory_corruption doesn't necessary mean that a RAM module is faulty, it can also point to a object which corrupted the RAM at the time of the crash, for instance a corrupted driver or program. Paging files and the CPU caches can also be causes.

Follow these steps -

Test for any corrupted drivers, by running Driver Verifier for least 24 hours, stop the test if a BSOD occurs before this time frame. Driver Verifier will place stress on the drivers within your system, which will cause corrupted drivers to crash and hopefully be pinpointed.Driver Verifier - Enable and Disable
More Help and Information with Driver Verifier - Using Driver Verifier to identify issues with Drivers

Memory:RAM - Test with Memtest86+
Run Memtest86+ for least 7-8 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors... Read more

1 more replies
Relevance 70.93%

Hi everybody, I’ve been trying to troubleshoot this BSOD on behalf of a friend. She says she is getting this BSOD when running audio applications (Finale, Pro Tools) in particular. I tried updating graphics and audio device drivers but it hasn’t helped. I grabbed this dump file but don’t have any experience reading them, BlueScreenView suggested ntoskrnl.exe crashed. I was hoping someone might be able to shed some light on the crashes with this.

It’s an ASUS Core i7 @ 2.3GHz. The RAM has been replaced since the issues began and it’s still Blue Screening. I can get more dumps or more system info if it would help!

*Edit: I'm having her run the Windows Seven Forums Diagnostic Tool now, I'll update when she gets back to me. (sorry)

Answer:BSOD 0x100000b8 Caused by ntoskrnl.exe

Update your USB 3.0 extensible driver from the Intel Download center.


Code:
Unable to load image \SystemRoot\system32\DRIVERS\iusb3xhc.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iusb3xhc.sys
*** ERROR: Module load completed but symbols could not be loaded for iusb3xhc.sys
It's outdated so an update should fix the issue.


Code:
fffff880`10125000 fffff880`101e9000 iusb3xhc T (no symbols)
Loaded symbol image file: iusb3xhc.sys
Image path: \SystemRoot\system32\DRIVERS\iusb3xhc.sys
Image name: iusb3xhc.sys
Timestamp: Fri Jan 27 09:35:28 2012 (4F226FE0)
CheckSum: 000C193B
ImageSize: 000C4000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
However we do need all the system information, ask her to run the DM Log Collector from here.

Then upload the folder created on her desktop.

4 more replies
Relevance 70.93%

Here are the details:

On Sun 4/22/2012 8:32:37 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\042212-30638-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x1A3F8C)
Bugcheck code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF80002BEFF8C, 0xFFFFF88003124758, 0xFFFFF88003123FB0)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a system thread generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.
On Sun 4/22/2012 8:32:37 AM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x7E (0xFFFFFFFFC0000005, 0xFFFFF80002BEFF8C, 0xFFFFF88003124758, 0xFFFFF88003123FB0)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Bug check description: This bug check indicates that a system thread generated an exception that the error handler did not catch.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.
On Sun 4/22/2012 8:11:47 ... Read more

Answer:How to fix BSOD caused by ntoskrnl.exe and ntkrnlmp.exe

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP
We could also use some system information, which you can get easily by running msinfo32.
To do that go to start>run>type msinfo32>enter

When it is finished running go to file>save>name it and upload to us here.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\M... Read more

9 more replies
Relevance 70.93%

My computer, over the past months, has been constantly displaying BSODs frequently, and I can't stand it anymore ! Can someone please help me to fix this? Thanks in advance

Answer:BSOD possibly caused by ntoskrnl.exe?

Please follow - Blue Screen of Death (BSOD) Posting Instructions

3 more replies
Relevance 70.93%

I have freshly installed windows 8.1 Enterprise (x64) and also installed the latest drivers for everything.

My configuration:
ASUS P8Z77-M
Intel i5-3570K
2X4GB DDR3 Kingston HyperX Predator
ATI Radeon HD6950 2GB
WD 1TB Caviar Black
CoolerMaster 550W Real Power

The BSOD is appearing whem I am playing games (mainly while playing Watch Dogs or CS:GO).

Tried with Driver Verifier for 24 hours, same result as before.
Tried Memtest86+ for 10+ hours, no problems.

Here are my dump files and a screenshot from BSOD Viewer. Any help or suggestion would be nice

Attachment 44495

Answer:BSOD caused by dxgmms1.sys / ntoskrnl.exe

You have a WD 1TB Caviar Black HD with the 2008 driver which is known for BSOD.
wdcsam64 fffff800`f0808000 fffff800`f080b880 Wed Apr 16 10:39:08 2008 (4805bb2c) 0000d887 wdcsam64.sys
Driver Description: Western Digital SCSI Arcitecture Model (SAM) WDM driver
2008 driver version has known BSOD issues in Windows
Driver Update Site: WD Support / Downloads / Select Product
Please update to the latest version.

Many of your dumpfiles are related to your graphiccard, they are Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_SEGMENT::TrimAllProcesses+fc ) and Probably caused by : atikmdag.sys ( atikmdag+36fc4 ).
But i see in the latest dumpfile you already updated the videocard driver.

If you keep bsod related to your graphiccard.
Test your graphiccard with prime 95.

Download and Tutorial Prime95

http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html

2 more replies
Relevance 70.93%

Hi!

I believe my graphics driver is crashing my windows. I've got several BSOD messages, at first I thought it was a faulty RAM so I purchased new ones and I used the other two slots on my motherboard. It didn't helped. I tried to update every driver on my pc but it started crashing more frequently. I decided to reinstall my win, I thought maybe its a win error. I was wrong. On new win I installed the drivers and just a few basic programs and afer an hour I've got another BSOD, but this time the win didnt boot up again so I had to do a system restore. Now I'm running without graphics driver.
My pc specs are:
CPU:AMD Phenom II x2 545
MB:asus m4a785-m
GPU:Gigabyte AMD Radeon HD 7770
RAM:Kingstone DDR2 800MHz 2x2GB kit
PSU: Crosshair CX430
Windows 7 Ultimate x64 completly new install without updates, previously I had Windows 7 professional x64 fully updated.
My CPU and MB are maybe 4 years old, my PSU and GPU are less then one years old and my RAM are brand new.
Thank you for your help.

Answer:[SOLVED] BSOD caused by ntoskrnl.exe

It could easily be that very poor psu. Can you tell us what the BSOD messages are? Never mind I missed the file attached.
I see mention of no Antivirus onboard for one and also messages that your video card is very poor for what you are doing and unless that is a wrong driver issue it makes no sense to me.

11 more replies
Relevance 70.93%

hello, i've recently bought a new computer but finding it frustrating that i keep getting the bsod randomly as i use my computer. using blue screenview, its saying that the bsod was caused by ntoskrnl.exe and Ntfs.sys. i am in desperate need of help and would be very grateful for any solutions bought forward.

Answer:bsod caused by ntoskrnl.exe and Ntfs.sys

Welcome

Dumps indicate memory issue

Run memtest86+ on each stick for 8 passes preferably overnight RAM - Test with Memtest86+

Post back results

Analyze

STOP 0x0000001A: MEMORY_MANAGEMENT :: Usual causes: Device driver, memory, kernel :: BSOD Index


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff7000d838588, 0, fffff80002ca170c, 2}
Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiUpdateWsle+35c )

Followup: MachineOwner
---------
STOP 0x00000024: NTFS_FILE_SYSTEM Usual causes: Disk corruption, insufficient physical memory, Device driver, Indexing, Resident antivirus, backup, defrag programs, Disk/Drive failing/failure BSOD Index


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*************************************************... Read more

9 more replies
Relevance 70.93%

Hi, i'm receiving random BSOD's for a long time. I want to fix it but i don't know much about it, so sorry if it isn't the good information. According to BlueScreenView, it's mostly the ntoskrnl.exe, but there are also messages about AsrOcDrv.sys, nvlddmkm.exe and ntfs.exe. I just did wat the BSOD posting guide said so hopefully it's enough.

Answer:Random BSOD's, Mostly caused by ntoskrnl.exe

Msinfo32:




Quote:
please go to start and type in "msinfo32.exe" (without the quotes) and press enter> save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).

2 more replies
Relevance 70.93%

Hello,

I'm writing this post in order to ask your help regarding a BSOD thas has been happening in my computer in the last week.

I've seen the information with the program Bluescreenview and I can post the information:


Code:

LAST ONE
==================================================
Dump File : 040114-29530-01.dmp
Crash Time : 01-04-2014 17:58:08
Bug Check String : IRQL_GT_ZERO_AT_SYSTEM_SERVICE
Bug Check Code : 0x0000004a
Parameter 1 : 00000000`770d132a
Parameter 2 : 00000000`00000002
Parameter 3 : 00000000`00000000
Parameter 4 : fffff880`03b7aca0
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+75bc0
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7601.18247 (win7sp1_gdr.130828-1532)
Processor : x64
Crash Address : ntoskrnl.exe+75bc0
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\040114-29530-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump File Size : 295.192
Dump File Time : 01-04-2014 17:59:37
==================================================


BEFORE
==================================================
Dump File : 040114-31371-01.dmp
Crash Time : 01-04-2014 17:48:52
Bug Check String : IRQL_GT_ZERO_AT_SYSTEM_SERVICE
Bug Check Code : 0x0000004a
Parameter 1 : 00000000`76f9132a
Parameter 2 : 00000000`00000002
Parameter 3 : 00000000`00000000
Parameter 4 : fffff880`03b... Read more

Answer:BSOD caused by driver ntoskrnl.exe

Hello Nuno, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

2 more replies