Computer Support Forum

KMODE_EXCEPTION_NOT_HANDLED Error Code 0x0000001e

Question: KMODE_EXCEPTION_NOT_HANDLED Error Code 0x0000001e

Hello.

This is the first time in two years time that I've received a BSOD. I woke up this morning, turned on my PC as usual, the OS reached the start-up picture (the one with a date and time on it), and it then spew the BSOD out on me.

1. Nothing is over-clocked. Everything is working on its default stock speeds (CPU, RAM, GPU).

2. I'm ruling out overheating cause the PC was less than a minute on till the BSOD appeared.

3. All of the possible OS updates have been installed via Windows Update. No changes in the OS's settings have been made in months as well.

4. All of the software I use (including drivers) is stable (not alpha, beta, so on...) and up-to-date. The OS is also an RTM release.

The only changes I've made in the past 7 days are as follows:

a) Uninstalled Opera 12.15 and installed its new version - v15. Highly doubt it has anything to do with this.

b) Reinstalled Daemon Tools LITE (+sptd v1.83). The version I had was 4.47.1-0333 and the disc-soft's main site had 4.47.1-0335.

c) Upgraded to a new graphics card - GTX780. The card, as stated above, is working on its default settings. Using the 320.49 WHQL drivers with it.

Bluescreen viewer gives out the following information: KMODE_EXCEPTION_NOT_HANDLED and 0x0000001e. It says the error was caused by the ACPI.sys driver at crash address ntoskrnl.exe+5a440.

Any help would be extremely appreciated.

Relevance 100%
Preferred Solution: KMODE_EXCEPTION_NOT_HANDLED Error Code 0x0000001e

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: KMODE_EXCEPTION_NOT_HANDLED Error Code 0x0000001e

ACPI.sys is related to power management. So, you just installed a new graphics card; yes? Can you current PSU handle the new power requirements? Specs say the minimum PSU recommendation is 600 watts for the GTX 780. Also, did you connect the 8 pin and 6 pin supplementary power connectors (information obtained from specs)?

11 more replies
Relevance 87.74%

this happens at random times could be 3x a day or nothing for a few days iv attached the desktop pc zip file

if i need to give any more info just ask
im in no way a pc geek i just use it for games so i will prob need a walk through like a 4 year old to get this fixed

thanks in advance

Answer:BSOD error 0x0000001e KMODE_EXCEPTION_NOT_HANDLED

added files

9 more replies
Relevance 86.1%

Hi!

Since I've upgraded my PC with a new motherboard, CPU, a second Nvidia GTX 580 graphics card (to make it SLI) and a cooler system for the CPU, I've been having random BSOD crashes.

I reinstalled my OS after changing the hardware, and since then I've been having these BSOD.

The BSOD refers the cause to a driver named ntoskrnl.exe.
I've included the DMP files and a system health report on this message.

You can find my system spec on my profile.

Thank you for your help guys!

Answer:Random BSOD, error 0x0000001e KMODE_EXCEPTION_NOT_HANDLED ntoskrnl.exe

  
Quote: Originally Posted by riotpowder


Hi!

Since I've upgraded my PC with a new motherboard, CPU, a second Nvidia GTX 580 graphics card (to make it SLI) and a cooler system for the CPU, I've been having random BSOD crashes.

I reinstalled my OS after changing the hardware, and since then I've been having these BSOD.

The BSOD refers the cause to a driver named ntoskrnl.exe.
I've included the DMP files and a system health report on this message.

You can find my system spec on my profile.

Thank you for your help guys!


These were caused by a memory exception. Please run these two tests to verify your memory and find which driver is causing the problem.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair di... Read more

2 more replies
Relevance 86.1%

Hey there, recently I downloaded sketchy winrar file with an .exe file in it to my laptop which I opened and that then proceded to open a bunch of dos prompt type windows, so I guess it was a virus. anyways after all that I got a blue screen of death with a STOP: 0x0000001E (0xC0000005, 0x00000000, 0x00000000, 0x00000000) KMODE_EXCEPTION_NOT_HANDLED error. When I tried to reboot I got the same thing again so it was pretty much a loop. Eventually I figured out that if I disconnected my network/internet cable I could boot up fine and run windows without any problems. I deleted all of the malicious files and ran a virus scan that showed nothing was wrong but Im pretty sure the virus did something to my registry because whenever I try to reconnect to the internet I get this same blue screen error. :cry

Any help would be greatly appreciated. Thanks
 

Answer:STOP: 0x0000001E KMODE_EXCEPTION_NOT_HANDLED error when connecting to internet

sorry, forgot to mention, I am running windows 2000 professional
 

2 more replies
Relevance 86.1%

Hey there, recently I downloaded sketchy winrar file with an .exe file in it to my laptop which I opened and that then proceded to open a bunch of dos prompt type windows, so I guess it was a virus. anyways after all that I got a blue screen of death with a STOP: 0x0000001E (0xC0000005, 0x00000000, 0x00000000, 0x00000000) KMODE_EXCEPTION_NOT_HANDLED error. When I tried to reboot I got the same thing again so it was pretty much a loop. Eventually I figured out that if I disconnected my network/internet cable I could boot up fine and run windows without any problems. I deleted all of the malicious files and ran a virus scan that showed nothing was wrong but Im pretty sure the virus did something to my registry because whenever I try to reconnect to the internet I get this same blue screen error.

Any help would be greatly appreciated. Thanks

oh I forgot to mention I am running windows 2000 professional
 

Answer:STOP: 0x0000001E KMODE_EXCEPTION_NOT_HANDLED error when connecting to internet

bryman1999 said:



Hey there, recently I downloaded sketchy winrar file with an .exe file in it to my laptop which I opened and that then proceded to open a bunch of dos prompt type windows, so I guess it was a virus. anyways after all that I got a blue screen of death with a STOP: 0x0000001E (0xC0000005, 0x00000000, 0x00000000, 0x00000000) KMODE_EXCEPTION_NOT_HANDLED error. When I tried to reboot I got the same thing again so it was pretty much a loop. Eventually I figured out that if I disconnected my network/internet cable I could boot up fine and run windows without any problems. I deleted all of the malicious files and ran a virus scan that showed nothing was wrong but Im pretty sure the virus did something to my registry because whenever I try to reconnect to the internet I get this same blue screen error.

Any help would be greatly appreciated. Thanks

oh I forgot to mention I am running windows 2000 professionalClick to expand...


Link: http://support.microsoft.com/kb/252935
 

3 more replies
Relevance 76.26%

Hello and good morning, I having problems with bsod mostly while playing league of legends but can occur randomly at other times. I have done memtest86, scanned the hard drive, and even took it to pcdirect where there installed a new motherboard but the problem has persisted. Thank you very much for your time.

Just an update a new bsod happened while running the repair option on league of legends.

Answer:BSOD PLaying League of Legends error code 0x0000001e a common code

Hi,

Your Nividia drivers and Nforce networking drivers are causing issues, also some USB issues.


Code:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff80002e80b05, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )
Followup: MachineOwner
---------
2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
KMODE_EXCEPTION_NOT_HANDLED (1e)
Driver Issues:


Code:

Driver: nvlddmkm.sys
Dated: Fri Jun 21 10:06:16 2013
Refers to: Nvidia video drivers.
As you have the latest driver installed, I would suggest Rolling back to the previous version.
If that does not fix the issue, then you may try this newer BETA version


C... Read more

9 more replies
Relevance 75.85%

WTF IS THAT?! My computer just turns off without warning out of no were. I turned off that "automaticaly reboot after errors" or sumtin like that, but it still does it, i hear it has sumtin to do with either my hard drive or ram, i took them out and pluged in the one i normally use, and my ram hasnt changed at all. can anyone help?
 

Answer:0x0000001E, KMODE_EXCEPTION_NOT_HANDLED

I can run a debugging utility on the dump files if you do this:

1 > create a new folder on the desktop and call it "dumpcheck" or whatever you like
2 > navigate to %systemroot%\minidump and copy the last few minidump files to that folder.%systemroot% is normally c:\windows. They are numbered by date. You can paste that address in address bar to get there.
3 > close the folder and right click on it and select Send to Compressed (zipped) Folder.
4 > use the "manage attachments" in the "advanced" reply window to upload that zip file here as an attachment.

This might point us to a 3rd party driver causing the error, if one exists for it.

Since almost all bugchecks can be caused by faulty ram, I would recommend you perform memory tests.

Beginners Guides: Diagnosing Bad Memory
 

1 more replies
Relevance 75.03%

Hello Everyone,

I recently purchased an Asus G53SX Notebook, and I keep getting BSOD's at least daily. Some of them refer to ndis.sys, nvlddmkm.sys, ntoskrnl.exe, tcpip.sys and Ntfs.sys. I suspect it might be some RAM modules that the store owners added to the laptop before I purchased it. So far, I upgraded the BIOS to the latest version, upgraded the graphics card drivers, checked memory for errors with the Windows utility (No errors). Most of them are KMODE_EXCEPTION_NOT_HANDLED. Please help me and let me know if you need more info.

System Specs:

ASUSTeK Computer Inc. G53SX
Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz
BIOS Date: 12/20/11 09:47:09 Ver: 04.06.03
Total Memory: 16,00 GB PC3-10700
NVIDIA GeForce GTX 560M

Answer:Random 0x0000001e KMODE_EXCEPTION_NOT_HANDLED

  
Quote: Originally Posted by pabvr81


Hello Everyone,

I recently purchased an Asus G53SX Notebook, and I keep getting BSOD's at least daily. Some of them refer to ndis.sys, nvlddmkm.sys, ntoskrnl.exe, tcpip.sys and Ntfs.sys. I suspect it might be some RAM modules that the store owners added to the laptop before I purchased it. So far, I upgraded the BIOS to the latest version, upgraded the graphics card drivers, checked memory for errors with the Windows utility (No errors). Most of them are KMODE_EXCEPTION_NOT_HANDLED. Please help me and let me know if you need more info.

System Specs:

ASUSTeK Computer Inc. G53SX
Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz
BIOS Date: 12/20/11 09:47:09 Ver: 04.06.03
Total Memory: 16,00 GB PC3-10700
NVIDIA GeForce GTX 560M


These crashes were caused by memory corruption (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.
If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, tes... Read more

4 more replies
Relevance 75.03%

Hello, i have this Bsod (KMODE_EXCEPTION_NOT_HANDLED ntoskrnl.exe 0x0000001e) since i bought Radeon 6950 flashed it to 6970 and overlocked PC
So, i teted my CPU in OCCT for hours and everything was perfect, i tested my videocard in 3Dmarks and other tests and again everything is perfect!
when i play League of Legends i have game crash several times and then this bsod!
it freaking me out.. everytime when i play LoL i have such problems...
Catalyst is the latest one -11.4 Beta (i tried to install 11.2 the same problem)
I have win 7 x64
please help!
minidump attached

Answer:KMODE_EXCEPTION_NOT_HANDLED ntoskrnl.exe 0x0000001e

  
Quote: Originally Posted by VaultDweller


Hello, i have this Bsod (KMODE_EXCEPTION_NOT_HANDLED ntoskrnl.exe 0x0000001e) since i bought Radeon 6950 flashed it to 6970 and overlocked PC
So, i teted my CPU in OCCT for hours and everything was perfect, i tested my videocard in 3Dmarks and other tests and again everything is perfect!
when i play League of Legends i have game crash several times and then this bsod!
it freaking me out.. everytime when i play LoL i have such problems...
Catalyst is the latest one -11.4 Beta (i tried to install 11.2 the same problem)
I have win 7 x64
please help!
minidump attached



This single crash was caused by the directx portion of your video driver. I would re-install the newest (non beta) version as indicated.

I would also suggest you back off the overclocking to test for often it is the cause.

When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper

When it is removed then download and install the fresh copy. I would just install the driver not the whole ccc as the extra's are often the cause of video problems.

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\031211-16255-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*... Read more

9 more replies
Relevance 75.03%

My sister has been getting a bunch of BSOD all the time I have attached the mini dump.

Answer:BSOD KMODE_EXCEPTION_NOT_HANDLED 0x0000001e

Hello There!

Remove:

Code:
Start Menu\Programs\AVG Family Safety Public:Start Menu\Programs\AVG Family Safety Public
Start Menu\Programs\Trend Micro Titanium Internet Security SMH-PC\SMH:Start Menu\Programs\Trend Micro Titanium Internet Security SMH-PC\SMH
Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately:Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase
Help protect your PC with Microsoft Security Essentials
Malwarebytes Free


   Note
Do not start the trial version of MalwareBytes


You may also take a look at: Good & Free System Security Combination

Virus Check:

Make scans with these tools below:TDSSKiller Rootkit Removal Utility Free Download | Kaspersky Lab US
Online Virus Scanner Eset
Application conflict:

Reduce the start-up items. This will help avoid software conflicts:Remove Startup Programs in Windows 7
Clean Startup in Windows 7
Please run these tests and report back the results.

1. SFC /scannow to check windows for corruption - SFC /SCANNOW - System File Checker
2. Disk check for errors on the hard drive - Run Disk Check in Windows 7
3. Troubleshoot apps by a clean boot - Performing a Clean Startup
4. Memtest86+ paying attention to part 3 - RAM - Test with Memtest86+
5. Hard drive test from HDD mfg website - Hard Drive Diagnostic Procedure

3 more replies
Relevance 74.21%

Hi,

I'm running on a clean install of windows 10 64 bit. I installed each day several programs without any problems. Everything seems ok, but tonight I had a BSOD. Can someone analyse the attached dump please

grz

Jacky Deschepper

Answer:intelppm.sys causes BSOD KMODE_EXCEPTION_NOT_HANDLED 0x0000001e

Hi Jacky De,

Welcome to the 10forums.

The intelppm.sys is a driver for your intel processor.
Please check here for driver update compatible with windows 10.

15 more replies
Relevance 74.21%

Sirs,

This has just started to occur these past few weeks, there seems to be no real pattern of events, the crash occurs when I've been using any number of my applications... I have tried searching around on-line for various help/tips, but nothing I've tried so far has resolved the issue. If you are able to analise the attached data & offer any suggestions, it would be most appreciated...

Many thanks in advance...

Answer:BSOD KMODE_EXCEPTION_NOT_HANDLED NETIO.sys 0x0000001e

All 3 dumps indicate a problem with avgfwd6a.sys.

Code:
ffffb581`9bc439a8 fffff809`b4bf235f*** WARNING: Unable to verify timestamp for avgfwd6a.sys
*** ERROR: Module load completed but symbols could not be loaded for avgfwd6a.sys
avgfwd6a+0x235f

This belongs to AVG Antivirus. Uninstall it and run with the built-in Windows Defender and Firewall for awhile, see if that resolves the problem.

4 more replies
Relevance 74.21%

Sirs,

This has just started to occur these past few weeks, there seems to be no real pattern of events, the crash occurs when I've been using any number of my applications... I have tried searching around on-line for various help/tips, but nothing I've tried so far has resolved the issue. If you are able to analise the attached data & offer any suggestions, it would be most appreciated...

Many thanks in advance...

More replies
Relevance 73.39%

Hello everyone,
 
I have a similar problem to this one but I can not understand how to solve it.
 
My computer crash only when I play with random times, I can play for several hours without problem, or conversely, have a bsod every 20 minutes.
 
Could you help me please ?

==================================================
Dump File : 033014-19063-01.dmp
Crash Time : 30/03/2014 23:04:42
Bug Check String : KMODE_EXCEPTION_NOT_HANDLED
Bug Check Code : 0x0000001e
Parameter 1 : 00000000`00000000
Parameter 2 : 00000000`00000000
Parameter 3 : 00000000`00000000
Parameter 4 : 00000000`00000000
Caused By Driver : tcpip.sys
Caused By Address : tcpip.sys+3d5aa
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+75b90
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\033014-19063-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 7601
Dump File Size : 293 504
Dump File Time : 30/03/2014 23:06:17
==================================================

==================================================
Dump File : 033014-4617-01.dmp
Crash Time : 30/03/2014 22:29:53
Bug Check String : KMODE_EXCEPTION_NOT_HANDLED
Bug Check Code : 0x0000001e
Parameter 1 : 00000000`00000000
Parameter 2 : 00000000`00000000
Parameter 3 ... Read more

Answer:Bsod problem (KMODE_EXCEPTION_NOT_HANDLED 0x0000001e tcpip.sys)

Hi,
 
Please navigate to the folder C:\Windows\Minidump.  Select all the files in the folder, then right-click, go down to Send to and in the list that opens select Compressed (zipped) folder.
Attach the file that is created to your reply - More Reply Options > Choose files ....
 

8 more replies
Relevance 73.39%

I've been getting the same BSOD for the past couple of days.

Things I've already done (to no avail):
Ran memtest 4.20 overnight - NO ERRORS
Replaced avast antivirus with Microsoft security essentials
Ran a quick scan with MSE - NO PROBLEMS
Updated ATI drivers to latest Catalyst 12.3
My specs are the following:
Custom built PC, less than 2 months old
Motherboard: Gigabyte 880GM-UD2H
Windows 7 Ultimate x64 SP1 OEM
Any help would be greatly appreciated. This is driving me crazy.
BSOD dumps attached.

Answer:BSOD | KMODE_EXCEPTION_NOT_HANDLED | ntoskrnl.exe+7cd40 | 0x0000001E

Since your ram appears to be ok I would start with driver verifier.
These crashes were caused by memory corruption/exception (Cx05) probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can ... Read more

1 more replies
Relevance 72.57%

Hello, after i upgraded from windows 7 to windows 10, i am getting those random BSOD screens. First i thought it was my usb wifi adapter, cause it was supported only for win 7 , but after upgrade i am still getting those BSOD errors. Can anyone help me where is the problem ? There are dump files, just bother with the last one from 7.8.2015 - that is the new after USB wifi adapter changed.

Answer:BSOD random crash KMODE_EXCEPTION_NOT_HANDLED 0x0000001e intelppm.sys

Chaoz64, I have looked at your last few dump files and they all are pretty consistent.

[CODE][
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff800ad072140, 0, ffffffffffffffff}
Probably caused by : intelppm.sys ( intelppm!AcpiCStateIdleCancel+0 )
Followup: MachineOwner/CODE]

They further name 2 drivers


Code:
ffffd001`69069990 fffff800`ae6ef7e4Unable to load image \SystemRoot\System32\drivers\netr28ux.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for netr28ux.sys
*** ERROR: Module load completed but symbols could not be loaded for netr28ux.sys
netr28ux+0x3f7e4

Which is your Ralink RT2870 series USB802.11n Wireless Adapter Driver (you may have a different manufacturer) , snd


Code:
ffffd001`0c469958 fffff800`46654ebbUnable to load image \SystemRoot\system32\DRIVERS\netr7364.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for netr7364.sys
*** ERROR: Module load completed but symbols could not be loaded for netr7364.sys
netr7364+0x64ebb

Which is your Ralink RT2870 series USB802.11n Wireless Ada... Read more

1 more replies
Relevance 71.75%

I just bought this laptop two days ago and installed Windows 7(x64) on it but yesterday when I was downloading the drivers, I did download and installed BIOS Update for Windows 7 (64-bit), Windows 10 (64-bit) - ideapad 700-15ISK, 700-17ISK, and after system being restarted I couldn't turn it on again.I ran into the seller and asked to fix the problem. He told me that I have ruined the BIOS and the machine does not let him to enter the setup. After 15 minutes or so, he told me that the problem is fixed and advised me to install windows 10 instead of 7 and I did but today the windows has crashed and restarted with the error code KMODE_EXCEPTION_NOT_HANDLED two times.Unfortunately I couldn't scan the QR code and enter the webpage but I have googled alittle about it.Some people say that the problem is because of the BIOS but I really don't have the guts to use that BIOS Updater again.Others mention another causes for this error.Can anyone suggest what's the problem and what should I do?Is there any problem with the BIOS?What should I do to fix it? For more information:I have tried to install windows updates since yesterday but one of them has encountered the following error every time:Some update files are missing or have problems. We'll try to download the update again later.
Error code: (0x80073712) 

More replies
Relevance 70.52%

Hey guys, i randomly get blue screens with the error code 0x0000001e i have a program called bluecscreenviewer which allows me to see the blue screens and what caused it etc. I have had 11 blue screens so far all with the same error. If someone could help me with this problem it would really be appreciated. I have the .dmp files but i dont think you can attach .dmp files.



Thanks,
Mark

Answer:Random BSODs, error code 0x0000001e

  
Quote: Originally Posted by tu3185


Hey guys, i randomly get blue screens with the error code 0x0000001e i have a program called bluecscreenviewer which allows me to see the blue screens and what caused it etc. I have had 11 blue screens so far all with the same error. If someone could help me with this problem it would really be appreciated. I have the .dmp files but i dont think you can attach .dmp files.



Thanks,
Mark


We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

It is almost impossible to spot trends from a single DMP file so if you have more than one please upload them. If you only have one please wait until the computer crashes again then upload both.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps a... Read more

9 more replies
Relevance 70.52%

I cant seem to figure out what is causing the error I updated all the drives rebooted my laptop to its original state and I still having the same issue also if I manage to start up my computer random sounds play in the background with no windows open it starts automatically even if I touch nothing and let it boot up fully

Answer:error code 0x0000001E when i start up my computer

Please follow the tutorial fully:Blue Screen of Death Posting Instructions

7 more replies
Relevance 70.52%

Hello all,

I'd appreciate for anyone can help me into this Blue Screen of Death error Code 0x0000001E and here is the attached from bluescreenview-x64.

Notes : I made a memtest 86 and there are no errors and also I UN-installed all DOT NET framework Versions and installed them again according by Google Search and also I tried all Nvidia Graphic Drivers Versions, 314.22, 320.18, others in beta. and no Success and keep crashing in same error code 0x0000001E

Thanks in advance, Waiting for your reply

Answer:BSOD error code 0x0000001E keep crashing

Hi -

From your attachment -

Code:
=================================================
Dump File : 110913-14695-01.dmp
Crash Time : 11/9/2013 9:36:21 AM
Bug Check String : KMODE_EXCEPTION_NOT_HANDLED
Bug Check Code : 0x0000001e
Parameter 1 : ffffffff`c0000005
Parameter 2 : 00000000`00000000
Parameter 3 : 00000000`00000008
Parameter 4 : 00000000`00000000
Caused By Driver : tcpip.sys
Caused By Address : tcpip.sys+8489d
File Description : TCP/IP Driver
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16385 (win7_rtm.090713-1255)
Processor : x64
Crash Address : ntoskrnl.exe+75b80
[/FONT]
Bugcheck is 0x1e (0xc0000005,,,) = kernel threw an exception

Exception = 0xc0000005 = memory access violation

Probable cause listed as tcpip.sys - a Microsoft Windows Networking driver

http://www.sysnative.com/drivers/driver.php?id=tcpip.sys

Check for an update for your wifi and Ethernet drivers.

First -- install all outstanding Windows Updates, including Windows 7 SP1 (if not already installed) -

www.update.microsoft.com

http://windows.microsoft.com/en-us/w...service-pack-1

tcpip.sys version number from your file = 6.1.7600 -- which is Windows 7 SP0

The file version should be 6.1.7601 at this time.

Regards. . .

jcgriff2

`

19 more replies
Relevance 70.52%

I have been plagued with this BSOD for a while now. I have ran my driver utility and as far as I can find I have the most current version of the BIOS. I ran a system scan that said it found no integrity problems. I will attach the minidump file and pray that the issue is simple and just evades me. This computer is very imprtant to my wife due to the fact that she uses it for school.

Thank You,
Michael
OS: Windows 7 Home
Prossessor: AMD Athlon II

Answer:Random BSOD with error code 0x0000001E

crud: just had another BSOD. This is getting old. I used to get one for BUGCODE_USB_DRIVER but I think I finally got that one done. This one seems more generic and I am gettingmore frustrated by the day. Please help if at all possible....Thanks again

3 more replies
Relevance 69.7%

Hey guys! I dont know why but i get BSOD with the massage 0x0000001E. Sometimes i dont get it like for 3 days, but sometimes i get it like 3 times in less than 12 hours. Here is a log from dm log collector. Hope u can help me with this one.

Answer:BSOD in random times with error code 0x0000001E

Code:
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\YUSRA\Downloads\Compressed\MARKO-PC-26_05_2015_151631,15\052615-28532-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18839.amd64fre.win7sp1_gdr.150427-0707
Machine Name:
Kernel base = 0xfffff800`02c11000 PsLoadedModuleList = 0xfffff800`02e58730
Debug session time: Tue May 26 19:04:52.096 2015 (UTC + 6:00)
System Uptime: 0 days 0:00:19.751
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

.................................................
Loading User Symbols
Mini Kernel Dump does not contain unloaded driver list
*******************************************************************************
* *
* ... Read more

1 more replies
Relevance 68.06%

Hello,
I'm randomly getting BSOD when my computer is not in safe mode. The last one I got I was able to get the error code and a mini dump file. Since I am not proficient in reading the logs, can someone give me a hand?

thanks in advance

Answer:BSODs, error code 0x0000001e - random crashes but ok in safe mode

Fill out your system specs. Click the link in my signature to do it. Also, follow the BSOD posing instructions so we have access to everything we need to help you.

5 more replies
Relevance 68.06%

Hey everyone!

For the past few weeks that I've been playing Star Wars: The Old Republic, I've been getting BSOD's every time I play. I've noticed that it only happens when I'm playing SWToR. I tried to fix the error by reformatting my computer, which didn't help. I've run memtests, switching the RAM cards around, etc., again to no avail. Any information you guys could give me would be great, I'm really getting to my wits end here.

Thank you!

Answer:BSOD while playing Star Wars ToR, stop error code 0x0000001E

There seems to be a problem with your Windows activation. Please post this report: Activation Issue Posting Instructions

7 more replies
Relevance 60.27%

Windows 7 Home 64-bit has been installed for over a year. Added MSI graphics card about 6 months ago.

Just started to get the BSOD upon boot a couple of days ago. Suspect that the machine might have an infection however I proceeded to check out hardware possibilities also.

So far I have run chkdsk on hard drive (no errors) and memtest86 on all memory sticks (no errors). Unable to boot in Safe Mode. Performed system restore back to earliest entry. Unable to run AV programs because system does not stay up long enough.

Need help figuring out what is causing the BSOD and how to disable it.

Answer:BSOD - Stop Code 1e on Boot - KMODE_EXCEPTION_NOT_HANDLED

Run an sfc/scannow command in command prompt at boot. If errors are found, run it twice more with each scan followed by a reboot.
SFC /SCANNOW : Run in Command Prompt at Boot

You have a few outdated drivers. Would you be able to boot into Windows long enough for you to update them?

Can you also post the other dump files?

7 more replies
Relevance 58.22%

Hi there, Over the last several days, I've experienced a number of BSoD's. They have only occured while playing The Sims 3, and began only after I installed the latest expansion (Island Paradise). Prior to that, there have been no problems.
 
Below is the data from several minidump files to help assess the problem.
 
Thanks in advance for any assistance.
 
==================================================
Dump File         : 073013-12183-01.dmp
Crash Time        : 30/07/2013 11:30:25 PM
Bug Check String  : KMODE_EXCEPTION_NOT_HANDLED
Bug Check Code    : 0x0000001e
Parameter 1       : 00000000`00000000
Parameter 2       : 00000000`00000000
Parameter 3       : 00000000`00000000
Parameter 4       : 00000000`00000000
Caused By Driver  : tcpip.sys
Caused By Address : tcpip.sys+16e9a0
File Description  : TCP/IP Driver
Product Name      : Microsoft® Windows® Operating System
Company           : Microsoft Corporation
File Version      : 6.1.7600.16385 (win7_rtm.090713-1255)
Processor         : x64
Crash Address     : ntoskrnl.exe+75bd0
Stack Address 1   :
Stack Address 2... Read more

Answer:Help with BSoD with 0x0000001e Bug Code

Please download MiniToolBox  , save it to your desktop and run it.
 
Checkmark the following checkboxes:
  List last 10 Event Viewer log
  List Installed Programs
  List Users, Partitions and Memory size.
 
Click Go and paste the content into your next post.
 
Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link.
 
Louis

13 more replies
Relevance 56.99%

My computer will randomly BSOD. Sometimes it will happens after I have been using it all day, and sometimes it will be shortly after I boot up. A lot of times I will have either a game running or a video stream running. I have attached the minidump.

Answer:BSOD randomly with bug check code 0x0000001e

Welcome to SevenForums.

If you are overclocking your system, please return all overclocked components to their stock speeds. If the BSOD's are found not to be caused by the overclock, you can re-overclock the components once we have finished the diagnostics.

Code:
Start Menu\Programs\MSI Afterburner Joe-PC\Joe:Start Menu\Programs\MSI Afterburner Joe-PC\Joe
Start Menu\Programs\MSI Afterburner\SDK Joe-PC\Joe:Start Menu\Programs\MSI Afterburner\SDK Joe-PC\Joe
This is overclocking software and can lead to system instability and BSOD's. Please reset all components to their stock speeds and then remove the software.

Problematic software:

Code:
Start Menu\Programs\AVG Public:Start Menu\Programs\AVG Public
Please remove AVG with its removal tool and replace with MSE instead.AVG | Download tools and utilities
Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-Microsoft Security Essentials, Free antivirus for windows.
Malwarebytes Anti-Malware Free
Good and Free system security combination




   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Please uninstall the following software with Revo Uninstaller using Advanced Mode. (Delete leftover registry):Download Revo U... Read more

8 more replies
Relevance 56.99%

Hello, I was working on a computer I am refurbishing and most of its problems were worked out (all software; reinstalling Windows and drivers), but when test-running it today, after running for a few hours, I went to check on it and (I think it woke from sleep) then it blue-screened. It had no label, just the stop code 0x0000001E (and then in parenthesis a few, I think 4, 0x00000000). I don't really know what it means, but I have not yet updated the BIOS (updates are avaliable) so I don't know if that would help. Thanks for any help. (Required ZIP attached).
EDIT: The BSOD doesn't list a specific reason. It displays: 0x0000001e (0x0000000, 0x0000000, 0x0000000, 0x0000000).

Answer:Random BSOD, stop code 0x0000001E

Monitor hardware temperature with system monitoring software like Speccy or HWMonitor:
Piriform - Speccy

CPUID - HWMonitor For how to upload a screenshot or file, read here

Test and Diagnose RAM Issues with Memtest86+:RAM - Test with Memtest86+ Pay close attention to part 3 of the tutorial "If you have errors"


   Tip
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

9 more replies
Relevance 56.17%

Hi I hope someone can help with my BSOD problem... Here are the details...

Is Windows 7 Home Premium . . .
- x86 (64-bit)
- I've restored the original installed OS on the system using 'Restore Factory Settings'
- an OEM version?
- The age of system (hardware) is 11 months old
- I've reinstalled the OS because of this BSOD problem but I'm still getting the same problem.

This problem started a couple of weeks ago, I always have a BSOD on a cold boot, usually in the morning when I switch it on. It also occurs if I shut down the comp for a significant length of time. I never have this problem if I warm boot (restart) the comp, no matter how many times I restart it doesnt happen!

I thought maybe I had a virus so reinstalled the OS on the C drive twice, once from a disc backup I know is clean, and once from the partition. The BSOD came back after both instances. I've followed your BSOD posting guidelines and have included the zipped Windows_NT6_BSOD_jcgriff2 folder and system health report.

Any help with this would be very much appreciated, and I thank you in advance.

P.S. If any more info is needed let me know, I'll be monitoring this thread regularly!

Cheers

Answer:BSOD on cold boot - stop code 0x0000001E

Code:
Loading Dump File [C:\Users\Mike\Downloads\BSODDmpFiles\alcatraz\Windows_NT6_BSOD_jcgriff2\011212-27003-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\users\mike\documents\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`03064000 PsLoadedModuleList = 0xfffff800`032a9670
Debug session time: Thu Jan 12 05:48:45.501 2012 (UTC - 7:00)
System Uptime: 0 days 0:08:39.000
Loading Kernel Symbols
...............................................................
................................................................
..................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

Probably caused by : hardware ( volmgr!VmReadWrite+bf )
... Read more

9 more replies
Relevance 55.76%

2 occasions so far, once while playing FONV and once during Left 4 Dead 2. Any help would be appreciated. I should mention that i had a small OC on my gfx card during the first one, but turned it back to stock settings after.

Thanks in Advance
Callum

Answer:BSOD playing left 4 dead 2, and before Fallout NV. Code: 0x0000001E

Hello Calbini.

Uninstall McAfee Using McAfee Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Roll back the fraphics driver to an older one.
Download and install Driver Fusion.
Reboot the computer in Advanced Boot Options, safe mode. Search Driver Fusion in your start menu, and remove all components of your nVidia display driver.
Boot normally now. Go to Drivers - Download NVIDIA Drivers, Drivers > Beta and Legacy; search there with your cards particulars for GeForce 306.23 Driver, dated 13.9.2012 and install it.
Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
Let us know the results.

5 more replies
Relevance 54.94%

Hello everyone,
This will be my first post on the Win7 forums, so please excuse me for sounding like a bit of a newbie.
Starting about 3 weeks ago, I began receiving BSOD's with the stop code: 0x0000001E. After having my computer checked by the Geek Squad in Best Buy, they couldn't really tell me what the issue was but were pretty certain it was a driver issue. They also did a full system diagnostic and my hardware was determined not to be the issue. This lead to them uninstalling and reinstalling the video card (Nvidia Geforce GTX 560) and they had me on my way. But to no avail for last night, when I was gaming, (Borderlands co-op) I received a BSOD with the pre-mentioned code. I copied down the code, and restarted my computer. Like every time before, (this was 3 BSOD's in total) I noticed that my Wireless USB Adapter (Linksys AE2500 Dual-Band) was not recognized upon start-up and was quite hot to the touch. I disconnected and reconnected the device, which worked. To make a long story short, I have basically pinned the issue down to my wireless adapter. But what does everyone think? Would this diagnosis make sense? I uninstalled and re-installed the adapter driver, but does is this enough? Thank you in advance for any help, it would be greatly appreciated.

System Specs:
(pre-built Cyberpower PC)
AMD FX-8 Core Processor
Nvidia Geforce GTX 560
8 GB RAM
1 TB HD
Gigabyte M68MT-S2 Motherboard

Answer:BSOD Stop Code 0x0000001E While Gaming, Wireless USB Adapter Issue?

Please follow the http://www.sevenforums.com/crashes-d...tructions.html so we can assis t you better.

-Justin

2 more replies
Relevance 53.71%

HELP!!!
 
I tried to download skype on my laptop and it didn't download. Atfer that inncodent i keep getting the blue screen with the text "kmode_exception_not_handled error (ks.sys)" I wanted to reset my computer because i didnt know what to do but....
1. The computer acts slow
2. The setting acts even slower
3. Even if I try to reset the blue screen keeps comming up
4. Repeat
 
Its getting annoying so can some help me get thought this error

More replies
Relevance 53.71%

I just received two of these BSOD today. Not sure if it's a driver issue or ram issue. Another thing I've noticed is when my pc restarted windows said something to the effect of "unable to reconnect to driver" I'm not user what driver it was talking about. Also coretemp, my cpu and gpu meters did not start up right away too ( i have a SDD, so normally they pop up really quick).

Answer:Help... Error... KMODE_EXCEPTION_NOT_HANDLED

AMD Phenom II x4 955 3.2 ( overclocked to 3.6)
Asus Sabertooth 990fx
Nvidia geforce gt 430
Kingston Hyper x genesis ddr3 1600 KHX1600C9D3X2K2/8GX
Kingston Hyper x limited edition ddr3 1600 KHX1600C9D3X1K2/8GX

16 more replies
Relevance 53.71%

I just wanted to share a bit of a problem I've had with MS's generous free upgrade to Win 10 on my Medion laptop. A few weeks ago I received notification that my upgrade was ready for download and the procedure was started but in order to ensure I had important stuff backed up, I clicked its 'postpone' button to a day later and clicked proceed. Instead, the download seemed to start immediately but I assumed it was part of the postpone procedure. No, Win 10 was installing immediately. No problem, I thought. YES, big problem! The install stopped with the above error and went into a loop of starting, error, re-starting. Not being a proper techie, the only thing I could think of doing was switching off and performing a recovery, which I did but Win 7 re-installed after having presumably formatting the drive, as I found I had lost everything when the laptop eventually re-started. Even using recovery software (Recuva/Piriform) was unsuccessful. Everything has gone.

I wonder if anyone has had similar problems? Is it worth attempting another 'upgrade'? And yes, a backup has been made, not that there's anything of note that needs saving now

Thanks for 'listening',

Simon....
 

More replies
Relevance 53.71%

Hi, PC was working great and all of a sudden during the last 2 weeks gives me BSOD about 2 times a day.

It has happened in the middle of BF1, Battlefront, using Firefox or just checking my mail.

I'm sure it must be a driver conflict somewhere as there's been lots of updates, but don't know which one.

Thanks for your help

More replies
Relevance 53.71%

Hi Ten Forums,

From past couple of days i faced an issue KMODE_EXCEPTION_NOT_HANDLED (ETD.sys) error and it restarts, after restart most of my installed software will be missing, almost will be like new user profile it look likes.

Need Any info i will provide.
Windows 10pro 64bit
Please help me in resolving this issue.

More replies
Relevance 52.07%

I've been experiencing random crashes on my computer over the last couple of weeks, I believe it has something to do with my graphics card drivers (igdkmd64.sys) but the update/rollback attempts didn't help nor did completely uninstalling and reinstalling the newest drivers. I've also updated my BIOS to the latest version and that too hasn't solved the issue.

Any advice you guys could give me would be fantastic!

Apologies in advance if I've done something incorrectly in posting my log information.

P.S I've also run a check disk command in command prompt and I've run a Windows Memory Diagnostic and both have shown no problems.

Also, I have a Intel(R) HD Graphics 530 and a NVIDIA GeForce GTX 960M both running in my device manager, is that something that is known to cause problems when running together?

Answer:BSOD KMODE_EXCEPTION_NOT_HANDLED igdkmd64.sys ERROR MESSAGE

The latest dump indicates problems with

Code:
ffff9c00`7963b588 fffff80b`16ca0000*** WARNING: Unable to verify timestamp for Netwtw04.sys
*** ERROR: Module load completed but symbols could not be loaded for Netwtw04.sys
Netwtw04+0x70000

This belongs to Intel(R) Dual Band Wireless-AC 7265. Your is dated 2/26/2016. I know Dell has a newer one but I don't see one for ASUS. Might check and see if you can find a newer one.


Code:
ffff9c00`7963ba28 fffff80b`1735a870*** ERROR: Symbol file could not be found. Defaulted to export symbols for wdiwifi.sys
wdiwifi!Wdi_NdisMIndicateStatusEx+0x13ee0

This is a Microsoft driver and not likely to be the cause. It's WiFi related so again sort of points to the Intel WiFi.

Dump also indicates a problem with igdkmd64.sys.

Code:
BugCheck 1E, {ffffffffc0000094, fffff80b154c3fc1, 0, 0}

*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
Probably caused by : igdkmd64.sys ( igdkmd64+2c3fc1 )

This belongs to your Intel(R) HD Graphics 530. The one you have is dated Thu Oct 1 14:35:51 2015. I don't see a newer one on the ASUS web site for this either. You could try the Intel; site and see if a newer one is available.

1 more replies
Relevance 52.07%

Well, I have to admit I've been away from PC's for about the last decade and I decided to get back into PC Gaming. It's been pretty daunting, and I'm still getting back into the swing of things (I've been using a Mac for about the last ten years.) The build I've done has seen its share of troubles, the newest being a constant, seemingly random BSOD. Sometimes I can be up and running for about a half hour playing a game or just listening to music, other times it BSOD's right after boot up. I can't seem to make it past an hour or so and there never seems to be a logic behind the crash as I'm not doing anything very intensive. All drivers should be up to date, I had to bring it in for repair because of a dead power supply and the tech there updated all drivers, but the problem could still be in that area based on the crash report. If anyone could lend a hand that'd be great and if I've left anything out just let me know and I'll provide as much info as possible. Thanks!

Here's the report from WhoCrased:

On Fri 4/5/2013 12:09:37 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\040413-19999-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75C40)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF800032A44FE, 0x0, 0xFFFFFFFFFFFFFFFF)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & Sys... Read more

Answer:BSOD Seemingly At Random, error KMODE_EXCEPTION_NOT_HANDLED

Your BSOD is caused by Norton Internet Security.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 4E, {99, 215a8a, 6, 100000000000001}

*** WARNING: Unable to verify timestamp for IDSvia64.sys
*** ERROR: Module load completed but symbols could not be loaded for IDSvia64.sys
Probably caused by : IDSvia64.sys ( IDSvia64+3d250 )

Followup: MachineOwner
---------
Description here ..... Driver Reference Table - IDSvia64.sys

Uninstall Norton and all Symentec products using Norton Removal tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Moreover, AVG exists there, and making the system crash on itself.

Code:
fffff880`0374e418 fffff880`049dbe34Unable to load image \SystemRoot\system32\DRIVERS\avgidsdrivera.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avgidsdrivera.sys
*** ERROR: Module load completed but symbols could not be loaded for avgidsdrivera.sys
a... Read more

9 more replies
Relevance 52.07%

I just recently upgraded my self-built pc from Windows 7 to Windows 8.1, and it's been running fine except for an occasional BSOD that seems to be related to the file mv91xx.sys. I went to my Marvell controller in the device manager and tried to update the driver, but Windows comes back saying that the drivers are up to date. Any help would be much appreciated, as I am rather new to this BSOD error debugging.

Attachment 52711

Answer:BSOD error Win8.1 kmode_exception_not_handled (mv91xx.sys)

Hi JTerek88 & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
7: kd> k
Child-SP RetAddr Call Site
ffffd000`c67e2408 fffff802`47418cdd nt!KeBugCheckEx
ffffd000`c67e2410 fffff802`473d88c2 nt! ?? ::FNODOBFM::`string'+0x3bb2d
ffffd000`c67e2b00 fffff802`473d6334 nt!KiExceptionDispatch+0xc2
ffffd000`c67e2ce0 fffff800`59712cc2 nt!KiBreakpointTrap+0xf4
ffffd000`c67e2e70 00000000`00000001 mv91xx+0x30cc2
ffffd000`c67e2e78 ffffd000`c6dbd180 0x1
ffffd000`c67e2e80 00000000`00000001 0xffffd000`c6dbd180
ffffd000`c67e2e88 ffffe000`9e400008 0x1
ffffd000`c67e2e90 00000000`00000098 0xffffe000`9e400008
ffffd000`c67e2e98 ffffe000`9e59e8d0 0x98
ffffd000`c67e2ea0 ffffe000`9e33c401 0xffffe000`9e59e8d0
ffffd000`c67e2ea8 fffff800`59718582 0xffffe000`9e33c401
ffffd000`c67e2eb0 00000000`00000100 mv91xx+0x36582
ffffd000`c67e2eb8 fffff800`59708619 0x100
ffffd000`c67e2ec0 ffffe000`9e5b04c8 mv91xx+0x26619
ffffd000`c67e2ec8 00000000`00000001 0xffffe000`9e5b04c8
ffffd000`c67e2ed0 ffffe000`9e59e8d0 0x1
ffffd000`c67e2ed8 ffffe000`9e59f0a0 0xffffe000`9e59e8d0
ffffd000`c67e2ee0 00001d40`ebfa76ea 0xffffe000`9e59f0a0
ffffd000`c67e2ee8 fffff800`596e3dd7 0x00001d40`ebfa76ea
ffffd000`c67e2ef0 ffffe000`9e33c401 mv91xx+0x1dd7
ffffd000`c67e2ef8 ffffe000`9e59e8d0 0xffffe000`9e33c401
ffffd000`c67e2f00 ffffe000`9e400008 0xffffe000`9e59e8d0
ffffd000`c67e2f08 00000000`ffffffff 0xffffe000`9e400008
ff... Read more

5 more replies
Relevance 52.07%

111413-25786-01.dmp    
11/14/2013 5:39:33 PM    
KMODE_EXCEPTION_NOT_HANDLED    
0x0000001e    
00000000`00000000  
 00000000`00000000    
00000000`00000000    
00000000`00000000    
ACPI.sys    
ACPI.sys+31b50    
ACPI Driver for NT  
 Microsoft® Windows® Operating System  
 Microsoft Corporation    6.1.7600.16385 (win7_rtm.090713-1255)    x64  
 ntoskrnl.exe+75b90                  
 C:\Windows\Minidump\111413-25786-01.dmp    4    15    7601    282,096    11/14/2013 5:40:53 PM    
 
Hello there, looking for some help on this computer. I repaired windows a couple weeks ago and updated drivers. I just went through and updated more drivers just in case. I have a feeling something else is making it crash but not sure what program or service. Has crashed in the past during printing but not always the case.
 
I am grateful for any suggestions. Thanks!

Answer:KMODE_EXCEPTION_NOT_HANDLED/ unexpected shut down error/ BlueScreen

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis

3 more replies
Relevance 52.07%

I've been experiencing random crashes on my computer over the last couple of weeks, I believe it has something to do with my graphics card drivers (igdkmd64.sys) but the update/rollback attempts didn't help nor did completely uninstalling and reinstalling the newest drivers. I've also updated my BIOS to the latest version and that too hasn't solved the issue.

Any advice you guys could give me would be fantastic!

Apologies in advance if I've done something incorrectly in posting my log information.

P.S I've also run a check disk command in command prompt and I've run a Windows Memory Diagnostic and both have shown no problems.

Also, I have a Intel(R) HD Graphics 530 and a NVIDIA GeForce GTX 960M both running in my device manager, is that something that is known to cause problems when running together?

More replies
Relevance 52.07%

I've been having very frequent BSOD's for the past 4-5 months now, I have tried as much as possible to pin-point the problem, but they still persist. I am going to take a wild guess, and say it might be memory related, although I wanted to come here just try to see if anyone else could see what's up. It usually just happens whenever it wants, it never happens 1-2 hours after a fresh start, I haven't noticed anything to trigger it specifically. The two errors that keep popping up are: KMODE_EXCEPTION_NOT_HANDLED, and IRQL_NOT_LESS_OR_EQUAL. I talked to a microsoft tech support agent a few days ago, and all he did was delete the all the dump files saved up, and said it'd be solved. Any and all help is appreciated in advanced, and I thank you for your time in assisting me in this issue.

Answer:BSOD issues while in general use, Error: KMODE_EXCEPTION_NOT_HANDLED

It appears your installation is counterfeit, as such I cannot provide support until it has been cleared up.

Troubleshooting a counterfeit installation is useless as it is not known what has been modified to your system.
A counterfeit installation contains heavily modified code which causes the system to behave in unexpected ways.
For this reason, analyzing counterfeit systems is unreliable and analysts won't try it.
I recommend to install a genuine copy of Windows.
If, after you have installed a genuine copy of Windows, you still get BSOD's we'll be happy to assist you.
Forum Rules





4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).

1 more replies
Relevance 51.25%

Hello,

A few days ago I got a random BSOD with the 0x0..1E stop error. Now my computer will rarely boot and when it does it still randomly gets the same BSOD. I once got a 1D stop error but its mostly 1E that keeps happening. I run Windows 7 Professional 64-bit and this time I used a Windows DVD to start up my computer. One time and only one I got the error message (while booting the computer) "BOOTIMGR corrupt, system couldnt boot" or something like that. I restarted my computer after I saw that and it was gone. I've attached two ZIP files of two different .dmp files that were created today with about 15-20 minutes in between them. Is there something wrong with my bios? If not, what could it be?

Thank you for any support, greatly appreciated

Answer:Random BSOD stop error 0x0000001E, hardware error?

Also maybe worth noting that I had not updated drivers in a while, right after posting this I updated my monitor's drivers. The rest were up to date.

3 more replies
Relevance 50.02%

Hello all,

I have a problem with Windows Update agent on Windows 7 SP1 enterprise.
We are using Configuration Manager 1606 and Windows 7 SP1 and about 140 computers works without any problem.
On the other 10 computers I got the following error message in the windowsupdate.log:
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING:     faultstring:Fault occurred
WARNING:     ErrorCode:InvalidParameters(7)

I've tried several actions although none does any help. Here is the list of actions:
- upgrade windows update agent to the latest version
- windows update agent reset by this instructions https://support.microsoft.com/en-us/help/971058/how-do-i-reset-windows-update-components
- empty Temporary Internet files
- check the rules and blocked traffic on windows firewall and physical firewall between server and workstation vlan
- sfc /scannow

It looks like significant Windows 7 error, although reinstalling is not my option.

Thanks for any help!
GregaR

More replies
Relevance 50.02%
Question: 0x0000001E error

Hi. I have a new computer, all the drivers are from manufacturer. I have constantly without any particular reason BSOD. I have attached .dmp file. Can you please help me to figure out the problem.

Answer:0x0000001E error

Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%. They use a driver, found in your dmp, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller when you're done: DuplexSecure - Downloads
You can use MagicDisc as an alternative.

Code:
sptd.sys fffff880`0102c000 fffff880`01152000 0x00126000 0x4ad24632 12/10/2009 00:55:14
Enable Driver Verifier if BSODs continue to occur
Driver Verifier - Enable and Disable
Then upload the new dumps

4 more replies
Relevance 50.02%
Question: 0x0000001E error

Hello!
0x0000001E error. Happens very randomly
Attached minidump file.
Please help!

Answer:0x0000001E error

BSOD caused by the Acronis True Image Product Line, remove such product or update it to the latest version


Code:
BugCheck 1E, {0, 0, 0, 0}

Unable to load image \SystemRoot\system32\DRIVERS\snapman.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for snapman.sys
*** ERROR: Module load completed but symbols could not be loaded for snapman.sys
Probably caused by : snapman.sys ( snapman+19089 )


   Information

Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%. They use a driver, found in your dmp, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller when you're done: DuplexSecure - Downloads
You can use MagicDisc as an alternative.



Code:
sptd.sys fffff880`01000000 fffff880`01127000 0x00127000 0x4bbd315c 08/04/2010 05:29:00

9 more replies
Relevance 50.02%

Hello There,

I'm hoping someone here can help me out. Ive been having 0x0000001e errors with a brand new system. It has occured several times when installing a game, browsing the internet and playing mp3s.

I have more than enough disk space and I updated the BIOS shortly after I started having the problem, but to no avail.

I suspect it may be a problem with the ati video drivers. I went through several different display driver installs before getting the latest version of the Catalyst Control Center, which now does not appear to be working properly all of a sudden.

Can someone take a look at my dump file and let me know if the problem is stemming from the video card drivers or if I'm way off.

Any input would be greatly appreciate! Thanks!

Windows 7 Home Premium 64bit
Original Install on the system
OEM

AMD Phenom II X6 1055T
4GB
ATI Radeon 5770 Graphics

Answer:Help With 0x0000001e error

Dump blames your Linksys Wireless-G USB Adapter - I suggest that you uninstall it COMPLETELY and then install the latest version here - Support and Services
The driver is also old.

Regards...

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

Unable to load image \SystemRoot\system32\DRIVERS\WUSB54Gv4x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for WUSB54Gv4x64.sys
*** ERROR: Module load completed but symbols could not be loaded for WUSB54Gv4x64.sys
Probably caused by : WUSB54Gv4x64.sys ( WUSB54Gv4x64+2d7cf )

Followup: MachineOwner
---------

1 more replies
Relevance 50.02%
Question: 0x0000001E error

hi i have a big problem with 0x0000001E error. i will get bsod every 30 sec after i start playing games.

i check with the sf tools and no problem was found.

i have attached the minidump file.

pls help...

Answer:0x0000001E error

Uninstall the software for your Death Adder mouse - the danew.sys file from that is causing your problems.
If that stops the BSOD's, then download a fresh copy of the installation software for your 64 bit copy of Windows 7. DO NOT use Vista drivers!!!

Summary of the BSOD:

Code:
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Tue Apr 27 01:19:01.497 2010 (GMT-4)
System Uptime: 0 days 5:26:59.652
BugCheck 1E, {0, 0, 0, 0}
*** WARNING: Unable to verify timestamp for danew.sys
*** ERROR: Module load completed but symbols could not be loaded for danew.sys
Probably caused by : danew.sys ( danew+6da )
BUGCHECK_STR: 0x1E
PROCESS_NAME: Neuz.exe

2 more replies
Relevance 50.02%
Question: 0x0000001E error

Hello There,

maybe my english no good. i have the 0x0000001e error, i have it for 2 months
and my pc is a 3 months old.

- x86 (32-bit) or x64 ? x64
- the original installed OS on the system? win7 ultimate x64
- an OEM or full retail version? Full Retail
- What is the age of system (hardware)? 3 months
- What is the age of OS installation (have you re-installed the OS?) 3 months - no re-installed

Answer:0x0000001E error

You said you've been having these BSODs for 2 months? I only see three minidumps and they were from today and yesterday. Do you run any system cleaners? If you do, stop. It erases the minidump files.


Code:
AppleCharger.sys Mon Jan 10 04:57:29 2011 (4D2AD809)
Remove your Gigabyte on/off charge driver. It is known to cause problems


Code:
GVTDrv64.sys Tue Sep 05 03:10:02 2006 (44FD22CA)
Please remove Gigabyte EasyTune6 driver (known issues w/Win7).


Code:
gdrv.sys Thu Mar 12 23:22:29 2009 (49B9D175)
Remove Gigabyte Easy Saver


Code:
TuneUpUtilitiesDriver64.sys Thu Sep 17 07:54:52 2009 (4AB2238C)
Remove Tune Up Utilities


Code:
Rt64win7.sys Fri Dec 24 02:30:25 2010 (4D144C11)
Update your Realtek driver - Realtek
Please run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+
2. Prime95 - Run all three tests for 3-4 hours each or until fail - http://www.sevenforums.com/tutorials...t-prime95.html
3. Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests

BSOD BUGCHECK SUMMARY

Code:

Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Fri May 13 13:23:11.350 2011 (UTC - 4:00)
System Uptime: 0 days 4:21:43.272
*** WARNING: Unable to verify timestamp for intelppm.sys
*** ERROR: Module load completed but symbols could not be loaded for intelppm.sys
Probably caused by : intelppm.sys ( intelppm+39c2 )
BUGCHECK_STR: 0x1E_0
PROCES... Read more

3 more replies
Relevance 50.02%
Question: 0x0000001e error

Hi all,

I've gotten a few BSOD's lately and can't seem to figure it out.

I have attached 2 of the minidumps.

Any help you can give is much appreciated. I am to the point of formatting soon.

Thanks
Scott

Answer:0x0000001e error

  
Quote: Originally Posted by smanuel


Hi all,

I've gotten a few BSOD's lately and can't seem to figure it out.

I have attached 2 of the minidumps.

Any help you can give is much appreciated. I am to the point of formatting soon.

Thanks
Scott



Scott Hi and welcome

These are Related to usbohci.sys related to OHCI USB Miniport Driver from Microsoft.

I would run a system file check toverify and repair it and read here USB Driver - General Fix for Problems

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\052511-26660-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Machine Name:
Kernel base = 0xfffff800`03054000 PsLoadedModuleList = 0xfffff800`03299650
Debug session time: Wed May 25 00:28:11.368 2011 (GMT-4)
System Uptime: 0 days 11:15:21.508
Loading Kernel Symbols
...............................................................
................................................................
.................................................
Loading User... Read more

3 more replies
Relevance 49.61%

After I put on a new graphic card that I brought it gave me this error message and for some reason it wont let me re install windows nor run debug mode or safe mode. Can someone please help me? Also it's a Window 7 home premium 64 bit!!

Answer:Hey I need with a BOSD error 0x0000001E

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:






Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

5 more replies
Relevance 49.61%

Hello,

I had recently been getting the following blue screen error 0x0000001E when running my Athlon 3GHz PC with Windows 2000 Professional SP4. It kept on happening and after reinstalling theOS a number of times i sent it back to the manufacturer to be fixed. They just rang and said that all the hardware is perfectly fine, but there is loads of dust within the PC. Do you think they dust was causing this error? Also my PC is kept near a radiator. Is this safe and could that be a cuase for the crashes and/or dust? Any thoughts on this would be great. Thankyou.
 

Answer:Dust and 0x0000001E error

6 more replies
Relevance 49.61%

I have regular blue screen crashes and cannot fix them really need help

I keep getting KMODE_EXCEPTION_NOT_HANDLED or DRIVER_IRQL_NOT_LESS_OR_EQUAL or SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

Answer:Playing any error 0x0000001e

Hiya and welcome to SevenForums!

Please follow the Blue Screen of Death (BSOD) Posting Instructions

9 more replies
Relevance 49.61%

I keep getting the BSOD on my PC. It was confined to Skyrim only at the start but is now random and not always when i am playing games. The last error was when my wife was on Skype. I have updated the graphic card drivers and even tried replacing the monitor as I had an error message about recalibrating the screen. As the monitor was pre Windows 7 I blamed that and replaced it. It didnt work.

Any help will be greatly appreciated!

Answer:BSOD, error 0X0000001E

  
Quote: Originally Posted by Weegus


I keep getting the BSOD on my PC. It was confined to Skyrim only at the start but is now random and not always when i am playing games. The last error was when my wife was on Skype. I have updated the graphic card drivers and even tried replacing the monitor as I had an error message about recalibrating the screen. As the monitor was pre Windows 7 I blamed that and replaced it. It didnt work.

Any help will be greatly appreciated!


Hello there!

Seems like the dump file doesn't have much information. Based on you system logs here are few recommendations.

Uninstall all the Asus Utilities just keep the drviers alone


Code:
ASACPI.sys Thu Jul 16 09:01:29 2009 (4A5E9F11)
AsIO.sys Mon Aug 03 12:33:16 2009 (4A768BB4)
Run SFC Scan SFC /SCANNOW Command - System File Checker

Update the following drivers:

Code:
PxHlpa64.sys Thu Mar 13 07:28:17 2008 (47D88A39) http://sysnative.com/drivers
/driver.php?id=PxHlpa64.sys

BSOD BUGCHECK SUMMARY


Code:

Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\082212-255810-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Thu Aug 23 01:20:50.993 2012 (GMT+6)
System Uptime: 0 days 9:53:27.804
BugCheck 1E, {0, 0, 0, 0}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : ntkr... Read more

1 more replies
Relevance 49.61%

I'm having a BSOD problem and I just did a clean install of Windows 7 as well, so my drivers are up to date from the actual manufacturers themselves. I did the SF Diagnostic tool thing and attached are the files.

Any feedback would be greatly appreciated. Thanks!

Answer:BSOD, error 0x0000001e.

Add to your System Specs:
1. The manufacturer, the model of your computer and if it is desktop or self-built.
2. If you have installed SP1, then add that to your specs.

I'll await that info before proceeding.
thanks,
karl

9 more replies
Relevance 49.61%

- x86 (32-bit) or x64 64bit
- the original installed OS on the system?Windows 7
- an OEM or full retail version?OEM disk but installed myself
- What is the age of system (hardware)? few days
- What is the age of OS installation few days yes i reinstalled

Answer:BSOD error 0x0000001e and others

showing a 1e and 3b error in debugger both suggest a memory problem ?

I suggest burn to CD (using an ISO burner) & run from boot memtest86+ for at least 5 passes, please move the sticks singly and together between slots to verify motherboard ram slots work as well as the ram sticks.

this test is not definitive but may pick up serious ram problems ?

let us know how it goes ?

1 more replies
Relevance 49.61%

For the last 2 days i get bsods frequently, please help asap. Tell me if you need aditional informations etc

Answer:BSOD error 0x0000001e

Run this

RAM - Test with Memtest86+

Do this overnight. errors might be detected after 8 passes.

Post back the results

After that perform this

Driver Verifier - Enable and Disable

Post back the dumps if any.

1 more replies
Relevance 49.61%

hi there, im having a BSOD problem with my laptop. i hope i have provided enough information

im running;

-windows 7 64-bit
-OEM version
-i just bought my asus n53sv in July 2011

i was unable to run the system health report. this was the error that i got,

Error:

An error occured while attempting to generate the report.


The wait for the report generation tool to finish has timed out.


anybody able to help? thanks

Answer:BSOD error 0x0000001e

Uninstall asus software such as it's updating service and just the general bloatware it not necessary and is causing errors in your event viewer..

90% of the minidumps point to ntkrnlmp.exe which is hardware errors and they are pointed towards memory so please follow this guide and tell us the results:

RAM - Test with Memtest86+


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Administrator\Downloads\Windows_NT6_BSOD_jcgriff2(1)\Windows_NT6_BSOD_jcgriff2\083011-20514-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*F:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`0304a000 PsLoadedModuleList = 0xfffff800`0328f670
Debug session time: Mon Aug 29 13:06:06.964 2011 (UTC - 6:00)
System Uptime: 0 days 0:00:23.900
Loading Kernel Symbols
...............................................................
................................................................
................................
Loading User Symbols
Loading unloaded module list
...
*******************************************************************************
* ... Read more

1 more replies
Relevance 49.61%

Hello,

I purchased a few new parts for my computer a while back as upgrades, I basically replaced everything but my HDD. I put everything together and did a clean install for windows 7 pro 64 bit. I am getting fairly random blue screens, sometimes they happen when surfing the internet, but they are guaranteed to happen shortly after starting a video game (I have tried WoW and LoL). I believe blue screen view says it is ntoskrnl.exe causing the crash. I have tried repairing Windows and updating all my drivers but I can't seem to fix it. I also removed my anti-virus software temporarily because it seemed to be causing an issue but no change. Any help you guys could give would be great, I have attached my DMP files, I hope they can help.

AMD phenom II black edition X4 975
Gigabyte 880GM-2DH
8GB DDR3 Patriot Memory (2x4GB)
80 GB Seagate HDD
NVidea GeForce GTS 250

Answer:BSOD error 0x0000001e

What antivirus did you have and how did you remove it? Did you use the tool provided by the developer? If not, find any tools from the developer for removal to make sure all remnants are removed.

Once your old antivirus is completely removed, we suggest for the time being that you replace your antivirus with Microsoft Security Essentials - Free Antivirus for Windows to run alongside Windows firewall.

I will now take a look at your .dmp files and post back in 10-20 minutes.

8 more replies
Relevance 49.61%

Really need your help as I have this problem since the beginning of this new machine. It constantly reboots usually around 24 hours period. I've tried installing new drivers for everything and even bios update.
I've tried replace the network card recently to try if its the network as I read there is problem with my network chip..

I've done the system file scan and it return 100% no problem.

Answer:BSOD error 0x0000001e

Please follow:Blue Screen of Death Posting Instructions

7 more replies
Relevance 49.61%

I have been getting a new BSOD error message, it was happened every 15 minutes or so while trying to play BF3 last night. Can anyone help me solve this?

I also ran a Memtest overnight, 8 passes and 0 errors.

-x64
-OEM
-Asus mobo, i5, PSU, 8GB Ram, are all 3 months old when I did a fresh Windows 7 install.

Answer:BSOD error 0x0000001e

Port Class (Class Driver for Port/Miniport Devices) and USBHUB.sys

Please run a system file check

SFC /SCANNOW Command - System File Checker

How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7
AND

USB Driver - General Fix for Problems

2 more replies
Relevance 49.61%

Hey I keep getting the "STOP Error 0x0000001E" screen, it does a dump and then restarts as normal. It seems more likely to come up when I am watching videos or playing a game. Any help would be greatly appreciated.
Thanks

Answer:STOP Error 0x0000001E

Welcome to SF.

The .nfo file uploaded is corrupt.

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.

Please upload your msinfo32.txt file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Export -> Save as msinfo32.txt and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .txt file, click send to compressed (zipped) folder -> Upload the .zip file here.

9 more replies
Relevance 49.61%

Hi everyone.

As of late I have been getting BSODs very frequently. Usually it is when I am trying to start a game of League of Legends but sometimes it will occur right after I log in to my profile. I am going to attach BSOD logs for the last 3 occurrences. I thought I was in the clear when the BSODs stopped for two days but then started back up. Any help would be greatly appreciated, and thank you in advanced for your time.

Answer:BSOD error 0x0000001E

Another BSOD, so here are the files. Thank you for your time.

2 more replies
Relevance 49.61%

Hello,
I'm not really good at software, I hope you guys can help me. I got a blue screen when playing World of Warcraft 2 weeks ago, number of bsods increased and soon I was unable to open my computer. I mean computer opened with the sound, light and stuff but there was no visual on the monitor. It sometimes run properly, sometimes didn't open and sometimes crushed with bsod. Crushes occurred during start, in-game or browsing internet.
Error code was 0x0000001e on the event monitor.

I reinstalled windows, deleted all the junk and drivers on the process, completely reinstalled everything from scratch and let the windows update itself. Didn't work, crushes started almost immediately.

I sent my computer to warranty service, where I bought it from, it came 2 days ago and the service providers said that "Your pc was too dusty, all your fans were unable to work with that dust so we cleaned it and updated your bios, it works properly now". It really worked nice with no bsod for 2 days, I updated my nvidia drivers to latest 296.10, windows updated itself nice, I downloaded World of Warcraft again and started playing today during afternoon.

I faced the same bsod an hour ago, with the same error code 0x0000001e. I'm really desperate right now, if I keep using my computer it will start blue screening again just like the last time, I don't know what to do, please help.

My specs are,
Windows 7 Ultimate X64,
ASUS M4A78LT-M LE AM3 AMD 760G Motherboard,
Leadtek Win... Read more

Answer:Getting 0x0000001e error for weeks

These crashes were caused by memory corruption/exception (Cx05) probably your asacpi.sys (yours is from 2005)

Asacpi.sys

The pre 2009 version of this driver is a known BSOD cause.





Quote:
Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (not before).


Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails... Read more

9 more replies
Relevance 49.61%

System Manufacturer/Model Number HP/P6620F
OS Windows 7 Home Premium 64bit
CPU AMD Phenom II X4 830 Deneb 45nm Technology
Motherboard FOXCONN 2AB1 (CPU 1)
Memory 6GB RAM
Graphics Card ATI Radeon HD 4200

Is Windows 7 . . .
- x86 (32-bit) or x64 ? x64 - the original installed OS on the system? Yes.
- an OEM or full retail version? OEM - I bought it refurbished, so I'm not sure.
- What is the age of OS installation - It came preinstalled when I bought it.

Well, I was watching browsing the internet and all of the sudden I get this blue screen error. I just had my computer repaired 5 days ago due to constant BSoD errors and had my Memory and Motherboard repaired, so I'm hoping the problem is not reoccurring. BSoDs used to occur about 10 times per day before the repair.

Today I just had this one blue screen. I just want to know if this just a random BSoD or if my computer broken again.

Attached is my minidump, thanks for the help.

Answer:0x0000001E BSoD Error

  
Quote: Originally Posted by Kyuubi


System Manufacturer/Model Number HP/P6620F
OS Windows 7 Home Premium 64bit
CPU AMD Phenom II X4 830 Deneb 45nm Technology
Motherboard FOXCONN 2AB1 (CPU 1)
Memory 6GB RAM
Graphics Card ATI Radeon HD 4200

Well, I was watching browsing the internet and all of the sudden I get this blue screen error. I just had my computer repaired 5 days ago due to constant BSoD errors and had my Memory and Motherboard repaired, so I'm hoping the problem is not reoccurring. BSoDs used to occur about 10 times per day before the repair.

Today I just had this one blue screen. I just want to know if this just a random BSoD or if my computer broken again.

Attached is my minidump, thanks for the help.


memory exception probably caused by a driver. Please run these two tests.
Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Driver verifier






Quote:
I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startu... Read more

9 more replies
Relevance 49.61%

Hi, my dad's Dell Vostro 620 has been suffering BSOD for a month.
I've re-seated the ram and disconnected and reconnected various sata and power connections, ran memtests, Avast Malware remove. Still no luck. Attached is my Blue Screen View file and zipped SF Diag tool report. Any help will be greatly appreciated.

Answer:BSOD on IE 10, error 0x0000001e

Hello and welcome willie mate some more system specs would be helpful for us to start I am no good at reading the dump stuff but for starters see if you can run these and any rubbish that gets picked up - delete it. Also is the machine in permanent BSOD? if so try safe mode for the first two links for file scanning.

System Info - See Your System Specs

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html<= DO NOT run on a SSD

http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/

http://www.bleepingcomputer.com/download/adwcleaner/

* download from bleeping computer

9 more replies
Relevance 49.2%

I have started to get randomly this BSOD error: 0x0000001e

I ran the program as admin but still got errors with MSINFO32 and WINDOWS, all others I got ok.

Answer:BSOD randomly error 0x0000001E

Welcome
Looks like a driver, take verifier test
Driver Verifier
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for... Read more

5 more replies
Relevance 49.2%

Processor: AMD Fx-8120 Eight-Core Processor 3.10GHz
RAM: 16.0 GB
System type: Windows 7 Ultimate x64bit
GPU: Nvidia GeForce GTX 670

The PC is about two weeks old. I have attached the .dmp files attached.
The error I am receiving is titled 0x0000001E.

Please help. Thank you in advance.

Answer:BSOD once every two days, error 0x0000001E

Also, here is some more information along with a attached .xml file.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80004478C0D
BCP3: 0000000000000000
BCP4: FFFFFFFFFFFFFFFF
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

8 more replies
Relevance 49.2%

Surfing the net on Firefox at least once a day I get blue screen, and if I'm lucky it may close and recover my graphics drivers, I've been on contact with Nvidia about the issue but nothing was done significantly apart from clean install in safe mode of my drivers, I've tried 266.58(current drivers), 270.61, 275.33, 280.26 and 285.27 Beta

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\092311-21200-01.dmp
C:\Users\Dave\AppData\Local\Temp\WER-38173-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows


Is Windows 7 . . .
- x86 (32-bit) or x64 ? = 64bit
- the original installed OS on the system? = Self Built system, had windows XP home 32x first, then windows Vista HP 64x, now windows 7 Ultimate 64x

- an OEM or full retail version? = Full Retail
- What is the age of system = coming upto 3 years now
- What is the age of OS installation = Installed 7 about 2-3 months ago

the rest of my system info is in "my system specs" below

Attachment 176577

Here's the DMP files created over the last ... Read more

Answer:BSOD while using Firefox (again) error: 0x0000001E

anybody? come on peeps, surely someone has something they can offer?

3 more replies
Relevance 49.2%

Rebooted from BugCheck, and created a report zipped as attached. Anybody able to read the file and diagnosis fault?

Answer:Rebooted from BugCheck error 0x0000001e

Please run the DM Log Collector again and upload a new zip file, the current attached zip is empty.

12 more replies
Relevance 49.2%

Hello everyone hope you all had an awesome Christmas

I reinstalled my Windows 7 x64 about a week or 2 ago becasue it was feeling slow (no problems with it)

The new install has worked fine untill today when i started getting BSODs while using firefox, i think its related to firefox becasue when i have firefox open the computer have blue screend in about 5mins, but now when im wrighting this with IE it hasnt blue screend for 40mins.

I didnt see all the error codes but the last one which was 0x0000001e

Im going to reinstall Firefox and try it with a new profile to see if that helps.

Hope someone has time to help little me in these busy christmas times

Answer:BSOD while using Firefox, error 0x0000001e

Just got another BSOD after reinstalling firefox and tried using it with a new empty profile.

This time i didnt get the code but it said something about RAMDISK.sys
so i have uninstalled the radeon Ramdisk software

i also updated the attached file in my first post to include the latest minidump

4 more replies
Relevance 49.2%

Hey guys i need help, im having random BSOD mozzilla crash also after the BSOD computer reboot my MSE becomes out of date......

using MSE and MBAM

heres my log file from sfc /scannow

Answer:Random BSOD error 0x0000001e

somehow i cant attach the file wait

7 more replies
Relevance 49.2%

Hello all, I recently tried fixing a family friends computer, I reformatted and everything went fine for about 3 hour and then I started getting the 0x0000001e error at random intervals, I'd have it running on minecraft and nothing then I'd open spotify and it died, I then reset the computer and it did it near immediately and now it's running just fine. ( for about 10 min )
Any solutions?

Answer:Random BSOD, error 0x0000001e

My Current solution is to follow the instructions: Blue Screen of Death (BSOD) Posting Instructions

1 more replies
Relevance 49.2%

Hello everyone. While playing earlier I got a BSOD when playing Leauge of Legends and was also in a skype call. BSOD I had months before was caused by a video card driver, didn't know if it was causing an issue again.

Thanks in advance.

Answer:BSOD playing LoL, error 0x0000001e

Hello nikotuck. The crash is a combination of a lot of failing factors. Let us describe.

Realtek PCIe GBE Family Controller, Realtek 10/100/1000 NIC Family all in one NDIS Driver

Code:
fffff880`02f8c9b8 fffff880`02c795d7Unable to load image \SystemRoot\system32\DRIVERS\Rtenic64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rtenic64.sys
*** ERROR: Module load completed but symbols could not be loaded for Rtenic64.sys
Rtenic64+0xf5d7
And that is kinda old.

Code:
fffff880`02c6a000 fffff880`02cb1000 Rtenic64 T (no symbols)
Loaded symbol image file: Rtenic64.sys
Image path: \SystemRoot\system32\DRIVERS\Rtenic64.sys
Image name: Rtenic64.sys
Timestamp: Fri Jul 02 15:31:00 2010 (4C2DB8DC)
CheckSum: 00045D83
ImageSize: 00047000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Realtek

Asus ATK0110 ACPI Utility (a known BSOD maker in Win7 and Win8). Also a part of many Asus utilities

Code:
fffff880`02f8bda8 fffff880`02cf0010Unable to load image \SystemRoot\system32\DRIVERS\ASACPI.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ASACPI.sys
*** ERROR: Module load completed but symbols could not be loaded for ASACPI.sys
ASACPI+0x6010
And that is very old.

Code:
fffff880`02cea000 fffff880`02cf2000 ASACPI T (no symbols)
Loaded symbol image file: ASACPI.sys
Image path: \SystemRoot\system32\DRIVERS\ASACPI.sys
... Read more

1 more replies
Relevance 49.2%

I have a machine that blue screens. No pattern has been identified except that it only does it when plugged into the port replicator. When the user has it at home, there is never a problem.

You'll notice by the minidumps this problem was happening a couple months ago then started again today. The user has been out of the office that whole time. We did not get a chance to fix it back then.

I spent the day upgrading drivers. There is a video card driver update left to do and it's highly possible that is the one. However, out internet comes to a screeching slow in the afternoon.

I've tried using Microsoft's debugging tools but was not getting very far when I ran across your site.

I've attached the zip as indicated in your instruction set for submitting to the BSOD board. The affected machine is a Windows 7 Professional x64 Sony Viao model number VPCZ212GX.

Thanks for all you guys do! Any help is greatly appreciated.
--
Quintin

Answer:Random BSOD, error 0x0000001e

Code:
BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 0000000000000003, the pool freelist is corrupt.
Arg2: fffff800034621f0, the pool entry being checked.
Arg3: 0000000000000000, the read back flink freelist value (should be the same as 2).
Arg4: fffff800034621f0, the read back blink freelist value (should be the same as 2).

Debugging Details:
------------------
BUGCHECK_STR: 0x19_3

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: System
Having a check for any solutions now, bear in mind, I am new to BSOD analysis.

4 more replies
Relevance 49.2%

Not getting BScreens too often, perhaps once every few days. But this is the stop error I get:stop error 0x0000001e (0xffffffffc0000005, 0xfffff80002e86445, 0x0000000000000000, 0xffffffffffffffff)I can't upload the dump files on here.Thank you.

Answer:BSOD stop error: 0x0000001e

Download BlueScreenView:http://www.nirsoft.net/utils/blue_screen_view.htmlunzip downloaded file and double click on BlueScreenView.exe to run the program.when scanning is done, go to EDIT - Select AllGo to FILE - SAVE Selected Items, and save the report as BSOD.txtOpen BSOD.txt in Notepad, copy all of the content, and paste it into your next reply

14 more replies
Relevance 49.2%

Hi, about every few hours or so, I get a blue screen with a stop error of 0x0000001e (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000). I was hoping that you could help me find out what the problem is.

Answer:BSOD every few hours, error 0x0000001e

Hello, SergeantPepper. I will see if I can help you. I looked at the last 4 of your dump files. The one thing that was consistent was it being blamed by IaStor, which is Intel Rapid Storage (IRSR), not to be confused with Intel Rapid Staart.


Code:
iaStorA
start end module name
fffff880`0120c000 fffff880`01892000 iaStorA T (no symbols)
Loaded symbol image file: iaStorA.sys
Image path: \SystemRoot\system32\DRIVERS\iaStorA.sys
Image name: iaStorA.sys
Timestamp: Thu Oct 18 08:00:54 2012 (507FFD86)
CheckSum: 0008D6BD
ImageSize: 00686000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Also blamed was


Code:

atikmdag
start end module name
fffff880`0f8f5000 fffff880`10b79000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Thu Nov 20 20:30:27 2014 (546EA3C3)
CheckSum: 0121F198
ImageSize: 01284000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Which is your graphics driver.

I would like you to update the IRST, Avast and the Graphics driver.

To update the graphics driver I am going to give you some links that will help you get a good clean install and not have any drivers you don't need that will conflict with other drivers. Download a WHQL driver from Latest AMD Catalyst Video Driver for Windows 7 . Once you have them downloaded, uninstall you current d... Read more

3 more replies
Relevance 49.2%

Refurbished Asus Essentio CG1330-7
Windows 7 Home Premium 64bit

Seems like I'm having a BSOD every hour since yesterday.
New to trying to fix a BSOD so I may not know how to do things.

Answer:BSOD many times in a day, error 0x0000001E

I know that was a barebones post. It seems like I get hit with a BSOD from no where.
Tried closing iTunes, BSOD. Opening Chrome, BSOD. Computer is booting up, BSOD.

2 more replies
Relevance 49.2%

Hello! So, I recently had this very bad problem with the BSOD. I don't know why, but eveytime I play a game, after half an hour, the BSOD occurs. This also happens when I just leave the PC on the desktop, opera, everything. Same error, 0x000001e. Please help me!

Answer:BSOD playing CS:GO or GTA 5 or anything else, error 0x0000001e

Hi scorpion,

There are no files in your upload.

Please follow the directions in the link below:
Blue Screen of Death (BSOD) Posting Instructions

1 more replies
Relevance 49.2%

Hi!

I'm getting this BSOD 4-5 seconds after logging in.
This is not the first time it happens but the last time I figured out how to fix it by myself.
I simply used the boot tool via F8 at booting. I selected boot with the last functioning configuration and it ran well for about a week without problems.
This time the trick is not working and I'm getting the BSOD again.

Can anyone help?

Thank you

Answer:BSOD after login, error 0x0000001E

I've installed just now BlueScreenView and that's what comes up:


Code:
022113-15756-01.dmp
21/02/2013 10:39:38
KMODE_EXCEPTION_NOT_HANDLED
0x0000001e ffffffff`c0000005
fffff880`03bbad80
00000000`00000000
00000000`00000000
ntoskrnl.exe
ntoskrnl.exe+75c40 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7601.18044 (win7sp1_gdr.130104-1431) x64 ntoskrnl.exe+75c40 C:\Windows\Minidump\022113-15756-01.dmp 4 15 7601 282.888
I'm wondering what happened to ntoskrnl.exe

8 more replies
Relevance 49.2%

Hello,

Have had the errors for some time now, but haven't had time to troubleshoot.
Errors mostly occur while system is starting up. Has even occurred before Windows has started loading (not sure what the error was, some time ago now).

Have had the computer for ~2 years with the same OS running - Windows7 x64 retail.

Will start with memtest later today and will report back.

Thanks in advance!

Answer:BSOD error 0x0000001e while booting

Interesting set of crash dumps you have there.
There's several things we need to look at.
First one I'm going to suggest is a memory test overnight (or 5 to 7 passes) using this method.
RAM - Test with Memtest86+
It's time consuming but it's more reliable than the windows memory check in my experience.
I'm only suggesting this time consuming step because several of the crash dumps are pointing directly to a memory management based issue.

I also want you to run this (it's quick and easy)
SFC /SCANNOW Command - System File Checker

Code:
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+42a65 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041287, The subtype of the bugcheck.
Arg2: 0000000000000078
Arg3: 0000000000000000
Arg4: 0000000000000000

Debugging Details:
------------------
BUGCHECK_STR: 0x1a_41287

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: LogonUI.exe

CURRENT_IRQL: 0

TRAP_FRAME... Read more

4 more replies
Relevance 49.2%

Hi guys since I desperate I need the expert's advice if possible...it's been a couple of months that i get BSOD with these reports but i can;t find out the cause. I followed all instructions to get a minidump file even without restarting on error , with no luck, meaning \i get no minidump file.I get the feeling that something is going on with the Volume shadow copy but I 'm not really that advanced to understand.
I attach two of the last reports generated hoping that some of you big guys might find something out, i'd appreciate every effort.
Thank you in advance.

More replies
Relevance 49.2%

Afternoon all,

I apologise that this is my first post, however I am truly at a loss.

My build is:

Intel 4670k i5
Gigabyte Z87X-D3H
(4x4) 16GB Avexir Core Series (1600MHz)
7970 ASUS Matrix

This is a brand new build, of which I have experienced a number of BSODs during it's conception. I am now on my 5th install of Windows and still haven't isolated the issue.

So far I have:

- Memtest'd all memory modules, individually and in different slots (all 1 pass with 0 errors - I will run overnight for a greater number of passes as time has been a constraint).
- Removed my SSD to eliminate this from the possibilities.
- installed old/current/beta GPU drivers.
- Currently no AV installed to eliminate this as a contributing factor

The occurrences seem to have reduced, but not gone completely. I wish I had my previous logs to share, but this is my most recent install of Windows and my only log is now attached.

I am at a loss of where to go next other than perhaps update my motherboard's BIOS?

Any help would be greatly appreciated - apologies if I've left off any information (just ask).

Thanks, Adam

Answer:BSOD new build, error 0x0000001e

Hi CptSwagSauce.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.17273.amd64fre.win7_gdr.130318-1532
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Scan the system for possible virus infection with the following programs.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Do some Disc checks.
Re-seat the sata and power cables.

Amke it sure that the HDDis properly screwed there. Also, if possible, change the SATA cable and apply it in another port on the motherboard.
Run chkdsk /f/r, following the option two of the tutorial Disk Check
Seatool for dos: SeaTools | Seagate download
Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.
Let us know the results.

4 more replies
Relevance 49.2%

This BSOD happens to me semi-regularly, mostly when recording using Cubase 5, and the three times it happened last night was the final straw for me to look further into this issue... Read submission rules and ran two error dump/debug dump procedures and attached results. Please let me know if you guys can help at all. Thanks!!

Additional Problem details provided by Windows after restart:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

System Specs are filled out in my Profile...

Answer:BSOD Using Cubase 5, error 0x0000001E

If no one has any ideas on this problem could someone post a link on how to interpret these error dump files that I could read over on my own?

5 more replies
Relevance 49.2%

Greetings,

I've been plagued with BSOD's generally while playing video games (STOP 0x0000001E). I can reproduce this error 100% of the time when playing Civilization 5. I've also been experiencing random computer restarts when doing tasks such as playing video games, watching videos or word processing.

When I started getting this error, I thought it may have been my PSU not supplying enough power to the graphics card, so I upgraded from a 400W to a 650W (running a Radeon HD 4870). I also upgraded my motherboard to an ASUS M5A97 (same CPU but upgraded RAM). Unfortunately, this did not fix my errors.

Recently, after updating some files (I don't recall which exactly), I've started receiving the following error upon system startup: "kdbsync.exe has stopped working". I have not resolved this issue.

I appreciate any help that can be provided.

Answer:BSOD playing Civ 5, error 0x0000001e

rddesautels, all the dumps you uploaded are quite old, and debugging on those may not be very effective.
Is there any latest dumps?

Run Disc Cleanup (Start> All Programs> Accessories> System Tools). Then follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. Post it following the Blue Screen of Death (BSOD) Posting Instructions.

9 more replies
Relevance 49.2%

Hi, all

For a while now i have been getting a 0x0000001E BSOD and I have no idea what is causing it. I've run memory tests, updated drivers for my GPU and ran a bunch of other tests, but the problem persists.
My pc is only 3 months old and it has been having this problem for over 2 months, so i figured the drivers would probably be up to date. At first the BSOD's only happened while using one program (second life), but recently it's shown up on other occasions as well, although I can't reliably recreate the error (which is what makes it so frustrating, since i have no idea what's causing it)
I hope someone here can help me.

Thanks in advance!

OS specs:
windows 7 64 bit home edition
original install
OEM version
system is 3 months old, so is the OS installation

Answer:I am getting a BSOD with a 0x0000001E error and can't find the cause

  
Quote: Originally Posted by Tallgeese


Hi, all

For a while now i have been getting a 0x0000001E BSOD and I have no idea what is causing it. I've run memory tests, updated drivers for my GPU and ran a bunch of other tests, but the problem persists.
My pc is only 3 months old and it has been having this problem for over 2 months, so i figured the drivers would probably be up to date. At first the BSOD's only happened while using one program (second life), but recently it's shown up on other occasions as well, although I can't reliably recreate the error (which is what makes it so frustrating, since i have no idea what's causing it)
I hope someone here can help me.

Thanks in advance!


It appears you are overclocking and if so stop. You have several different causes but if you are overclocking we have to fix that problem before we can work on the underlying causes.

8 more replies
Relevance 49.2%

Recently i've been getting stop 0x0000001E each time i logon on my administrative account, im not really tech savvy so dont know why this happens if you guys can help i would be greatful...

Answer:BSOD upon logon, error 0x0000001E

Welcome
Your reports point toward hardware, lets make sure by taking the driver verifier. If you pass we will administer several hardware tests to determine the cause.
Driver Verifier
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get th... Read more

7 more replies
Relevance 49.2%

This problem has come up just recently.

Full error message:

*** STOP: 0x0000001E (0xFFFFFFFFC0000005, 0xFFFFF800030FCDF1, 0x0000000000000000,0x0000000000000007)

I've been attempting but struggling to access the info dump, if anyone can help me with that I would love to post that on here as well.

Specs (as far as my limited knowledge can go):

Toshiba Satellite P505-S8980
Windows 7 Home Premium 64bit
Intel Core 2 Duo T6600
6GB DDR2 Ram, 500GB HDD
Intel Integrated Graphics Chipset

More replies
Relevance 49.2%

Don't really know to much information but what i provided.

Answer:0x0000001e error while playing Minecraft

Code:
fffff880`0ad70498 fffff800`03450e80 nt!KiInitialPCR+0x180
fffff880`0ad704a0 fffff880`0133d880Unable to load image \SystemRoot\system32\drivers\mfehidk.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for mfehidk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
mfehidk+0xa9880
fffff880`0ad704a8 fffff880`012ccffc mfehidk+0x38ffc
fffff880`0ad704b0 fffffa80`0538d800
The problem is caused by McAfee. Uninstall it completely using the tool below, and replace it with MSE.

McAfee Removal Tool - McAfee Uninstaller

1 more replies
Relevance 49.2%

Been having random blue screens for the past few months. Haven't noticed a pattern to it yet. Used the sticky thread to post detailed information and dump files about the problem as best I can.

Answer:Sproadic BSODs, error 0x0000001e

Welcome to the forum.

Please remove Avast! and use MSE for testing purpose.

Microsoft Security Essentials is recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes - Free
Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Fix these drivers:

AsInsHelp64.sys Fri Jan 4 11:36:10 2008 (477DC5CA)
Asus Ai Booster software
Driver Reference Table - AsInsHelp64.sys

AtiPcie.sys Tue May 5 21:00:22 2009 (4A005486)
ATI PCIE Driver for ATI PCIE chipset or [br] ATI PCI Express (3GIO) Filter[br]Found in my ATI video drivers (I have an Intel chipset)
Driver Reference Table - AtiPcie.sys

AsUpIO.sys Mon Jul 6 08:21:38 2009 (4A515FB2)
ASUS hardware monitoring software related
Driver Reference Table - AsUpIO.sys

ASACPI.sys Thu Jul 16 09:31:29 2009 (4A5E9F11)
Asus ATK0110 ACPI Utility (a known BSOD maker in Win7 and Win8). Also a part of many Asus utilities (Win8 versions available from Windows Update as an Optional Update - but check Asus first!)
Driver Reference Table - ASACPI.sys

To perform a clean install of a driver, follow this tutorial: How to Clean Left Over Driver Files with Driver Sweeper
Reduce items at start-up. Nothing except anti-virus is required:Startup Programs - Change
Troubl... Read more

1 more replies
Relevance 49.2%

Hello,

I had just finished playing some Civ5 and a few minutes after, a random BSOD happened.

Just trying to get to the root of the issue, if there is one.

Thanks for any help.

(Used the DM Log Collector. File is attached with this post)

Answer:Random BSOD, error 0x0000001e

Your nVidia driver has been flagged.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa80069674e0, fffff880100060dc, ffffffffc000009a, 4}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+9a30dc )
Download the latest version (337.88) and follow NVIDIA Drivers - Avoid Problems for the cleanest possible install.

Test and report back.


Code:
3: kd> lmvm nvlddmkm
start end module name
fffff880`0f663000 fffff880`102ac000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Thu Dec 19 17:02:52 2013 (52B326BC)
CheckSum: 00C19112
ImageSize: 00C49000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

1 more replies