Computer Support Forum

Windows 8 Crashed on wake from sleep or hibernate

Question: Windows 8 Crashed on wake from sleep or hibernate

Dears ,

please i need a help on this issue , my windows keep crashing on wake from sleep or getting back from hibernate

please find the files needed attached .

Thanks a lot .

Relevance 100%
Preferred Solution: Windows 8 Crashed on wake from sleep or hibernate

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Windows 8 Crashed on wake from sleep or hibernate

Please upgrade or remove hotspot shield. hssdrv is the culprit, seemingly.

6 more replies
Relevance 88.56%

System spec is below.

The problem.

I pressed the circle button with the vertical lline in Vista (from pressing Start) This sent the computer to sleep or hibanate I dont know which. I cannot get the computer to come back on. The monitor remains black (no picture) and says no signal.

I have deprived the computer of power. This was achieved by unplugging it from the wall, and removing the power cable also from the computer.

I have tried restarting the computer but to no avail. I have also removed the keyboard and mouse when I try starting up. I have also tried, holding in the power button and then restarting.

No matter what I try still no joy. No signal on the monitor. The lights in all cases come on, on the base unit and I can hear fans spinning etc.

I have read about this issue in round about ways but all of the fixes seem to rely on actually being in windows.

I'm at my wits end please help !
Thanks


System Spec.

ntel? Core?2 Duo E8600 (2 X 3.33GHz) 1333MHz FSB/6MB L2 Cache
Memory (RAM)
4GB CORSAIR XMS2 800MHz
Motherboard
ASUS? P5Q DELUXE: DUAL DDR2, S-ATA II,2 x VGA, 2 x PCI, 2 PCI-E x1
Operating System
Genuine Windows Vista? Home Premium 32 bit Edition + SP1, CD & Licence
USB Options
8 x USB 2.0 PORTS (6 REAR + 2 FRONT) AS STANDARD
Memory - 1st Hard Disk
160GB SERIAL ATA II HARD DRIVE WITH 8MB CACHE (7,200rpm)
2nd Hard Disk
1000GB SERIAL ATA II HARD DRIVE WITH 32MB CACHE (7,200rpm)
3rd Hard Disk
1000GB SERIAL ATA II HARD DRIVE WITH 32MB CACHE (7,200... Read more

Answer:Windows Hibernate sleep wake up problem

I would remove your video card and then replace it back it. Then I would watch it start up and see if anything wired goes on inside your case. If not and all looks good but there is still no monitor signal I would check to see if it is set to the right signal, the newer monitors have DVI VGA etc and you must properly select it.

If none of this helps I will look into it further.


In your specs you also say that you are using ati radeon 4870x2, a dvi card, but then you say under DVI cable "none"

7 more replies
Relevance 87.33%

I just did an all new install of win7 ultimate 64 on my gaming rig. It's a fresh install onto a brand new SSD. When it hibernates I can't press the spacebar to wake it up or even hit the power button on my rig. I have to turn the psu switch off and then back on and then hit the power button before it will turn on. I then ran a windows fix thing that was on the microsofts website, so now when it sleep's it turns on right away again without hitting the mouse or keyboard but when I turn sleep on and turn hibernate back on I get the same issue of it not wanting to turn back on. When I plug in my old HDD that has my other OS on it I don't get any of these issues, any help or info would be great!

Answer:Windows 7 Ultimate refuses to wake up after sleep/hibernate

Delete the hibernation file so the system will create a new one.

How to disable and re-enable hibernation on a computer that is running Windows

From what i've read about SSD's, Page Files / Hibernation Files / Defrag and the like can reduce the life of your SSD because it's causing 'unnecessary read/writes to the drive.'

7 more replies
Relevance 84.87%

Hello All, My new Y410 Laptop keyboard does not respond when it wakes from a sleep or hibernate when windows resumes. I would say 7 out of 10 times it does that. I saw another thread here:http://forums.lenovo.com/lnv/board/message?board.id=N_Series_Lenovo_3000&message.id=1666&query.id=19... But that option does not even exist in Devide Manager. I run the OEM Windows Vista that came along.In Control Panel -> Power Options -> Change Plan settings -> Change advanced power settings -> And there is NOTHING for pointing device or Keyboards. Is this a driver issue or power setting or a Hardware issue. Has anyone found a resolution to this? Could there be a registry setting? Anyone - Please Anyone who has a resolution, please advise and help. My Last resort will be to dump this garbage pile called VISTA and downgrade to Win XP. Anyone on Win XP has this issue too? Hopelessly awaiting a resolution.

Answer:Lenovo Y410 keyboard does not respond on Wake Up (Windows Resume) from Sleep or hibernate

I'm not sure you're looking the right place.FollowStart->Control Panel->System->Advanced settings->Device managerThere you find keyboard.





//help will save the world

6 more replies
Relevance 83.64%

Whether I choose any option other than to turn PC off, instead of tapping spacebar on my MS wireless keyboard I have to tap the button for power on the tower, then the monitor turns on as the fan runs, but always a black screen. So then I have to do a manual boot and select to start normally.
 
Started a week ago, around the same time as a graphics card failure. I installed a new PNY GeForce, updated ALL drivers on my Gateway DX4710-UB301A, (Win 7 Home Premium 64-bit, AVG antivirus free 2014) played with power management and startup config settings, trolled forums, performed malware scans, and still can't figure out the issue. 
 
Please help!

More replies
Relevance 80.36%

I recently replaced Linux on my laptop with Windows 7 and since then I have had a problem that when I put my machine to S3 sleep for a long period, i.e. overnight, I wake up and find that the machine is in hibernate. This is unacceptable to me because I make a habit of writing as soon as I wake up, and the ten minute delay while the machine is coming out of hibernate means that I lose my thoughts. how do I get the machine to stay in S3 sleep?

The machine is a Thinkpad R61i and the third-party battery is showing signs of age, but I always leave the machine plugged into the mains overnight. And as I said, I never had this problem when I was using Linux.

Answer:I go to bed and laptop is in sleep. I wake up and it is in hibernate.

Yes S4 seems to be a feature in Laptops to save drainage on the Battery ...

How long does it take the Laptop to boot ?

Surely it must be faster that way ?
Have you updated your Ram ?

9 more replies
Relevance 80.36%

I have an inspiron 1545 running windows 7 (x64) and I am having problems waking up my computer from sleep . Usually, when I put my computer to sleep, I have problems waking up my computer. The screen stays relatively dark when I move my mouse although I can see some light coming from the bottom part of the screen (so the screen seems to be on, just not showing anything sueful). When I try to press the space bar multiple times, my computer gives me a warning ding and it plays a sound when I insert or remove my usb mouse. I've had my computer for two years and the problem just started a week ago. I was wondering if anyone has any idea what the problem might be or what tests I should run to figure out the problem.

Answer:Computer won't wake up from sleep or hibernate

If you plug a monitor into the laptop, what does it show when you wake the computer up?

1 more replies
Relevance 80.36%

Have been dealing with this BSOD for a week now the only time it occurs is after the computer is awoken from sleep/hibernate. Originally thought it was due to bad drivers or drivers needing to be updated. Decided to do a complete reformat and clean install of windows and drivers. After the reformat system ran fine for two days and then got another BSOD today after awaking the CPU from sleep/hibernate. so far i haven't seen any performance losses or had any BSOD,s during normal operation or during game play. i have been only able to get the system to blue screen after it is awoken from sleep. every BSOD has given a different STOP Code. So i have decided to post the dumps for some help.

Attachment 273816

Attachment 273817

Attachment 273818

System Specs are:
CPU-Intel I7-3820 @3.60 GHz
MOBO- ASUS P9X79 PRO
Ram- CORSAIR Dominator Platinum 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1866
Hard drives-OCZ Vertex 4 VTX4-25SAT3-128G 2.5" 128GB SATA III MLC Internal Solid State Drive (SSD)(Primary Drive)
Western Digital 1TB Caviar Black SATA Internal Hard Drive(Secondary)
Graphics Card- GIGABYTE GV-N680OC-4GD GeForce GTX 680 4GB 256-bit GDDR5
PSU- CORSAIR HX Series HX1050 1050W ATX12V / EPS12V
Optical Drive- ASUS DRW-24B1ST/BLK/B/AS Black SATA 24X DVD Burner
Operating System is Windows 7 ultimate 64bit

Any help would be appreciated
Thanks Byrdman

Answer:BSOD After i wake CPU from Hibernate Sleep

Please "Grab All" and post a new zip: Blue Screen of Death (BSOD) Posting Instructions

We need all the files for best analysis.

5 more replies
Relevance 80.36%

Hi,

I've bought new laptop, installed fresh windows but get many bsod.

I run disk check (Check your hard disk for errors in Windows 7) and memory check (Diagnosing memory problems on your computer), every thing is OK.

All dump file are in this archive:
https://skydrive.live.com/redir?resi...75804A53F8!107
+ 2 first file (061213-7082-01, 061413-7862-01): I go away more than 15 minutes, my laptop goes to sleep, when I come back and turn it on, it shows bsod.
+ 3 next files: I checked my drivers with verifier.exe, After some test, I detect that bluetooth driver has error, it causes bsod each time my laptop restart (with verifier.exe). I removed this driver.
+ last file (061613-11481-01): happended 5 minutes ago, it alo crashes after waking up from sleep. The chrome is up to date (Version 27.0.1453.110 m).

More Info: I install windows on the second drive (SSD).

Update: I run SF_Diagnostic_Tool and upload result here.

Answer:BSOD after wake up from sleep/hibernate

When storage and network fail together, we must to see more information before conclude anything. Post it following the Blue Screen of Death (BSOD) Posting Instructions.

9 more replies
Relevance 80.36%

No doubt this is a "hardware problem" but here goes:

My hp 6735s laptop (vista) does not wake up from sleep/hibernate if put to sleep/hibernate and left alone for more than 25 minutes. Nothing seems to wake it up, until I restart the computer by pressing down (a good long time) on the power button.

Also, the "Sleep" button on keyboard has no effect whatsoever.

Small detail: I checked control panel -> keyboard, as suggested by one site and notice that my keyboard has no support for a wake fup unction.

Answer:laptop does not wake from sleep / hibernate

Try changing your sleep settings.

Go to "Control Panel"

Go to "Hardware & Sound"

"Power Options"

You will see such options as "Choose What The Power Buttons Do" & "Choose What Closing The Lid Does." Poke around in here and you should find how to change the sleep settings.

I played around in here the other day. I bet this will help you.

Good luck!

3 more replies
Relevance 80.36%

Hi, i got a new Thinkpad e335 and installed win8.1pro with all drivers from lenovo downloadarea. Still one problem exists and is annoying as hell: Notebook wont wake up when disonnected from AC! So if I try to wake it up, I always have to connect it to the AC. Is there a Solution for this problem? I already tried to update bios, but its newer (1.71) than the support distributed bios (1.70)Also installed all power-managers and stuff i could find.Sometimes it wakes up, when I press the start-butten 2-4 times very fast, but sometimes it does not do anything... I need a little help with that

Answer:No Wake up from sleep or Hibernate while on battery

push

1 more replies
Relevance 79.13%

Hi,
I have an XPS 15 9550 in which I replaced its SSD and memory, and installed a fresh Windows 10 Enterprise x64.
The specs are as follows:


Computer Model
XPS 15 9550


BIOS Vendor
Dell Inc.


BIOS Version
01.02.00


BIOS Date
4/7/2016


OS Version
Microsoft Windows 10 Enterprise


Processor
Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz


Memory DIMM A
16,384.0MB


Memory DIMM B
16,384.0MB


Disk Drives
Samsung SSD 850 EVO 1TB


 
NVMe Samsung SSD 950


Display Adapters
Intel(R) HD Graphics 530


 
NVIDIA GeForce GTX 960M


IDE ATA/ATAPI Controllers
Intel(R) 100 Series/C230 Chipset Family SATA AHCI Controller


Sound Devices
Bluetooth Hands-free Audio


 
Realtek High Definition Audio


 
NVIDIA Virtual Audio Device (Wave Extensible) (WDM)


 
Intel(R) Display Audio


USB Controllers
Intel(R) USB 3.0 eXtensible Host Controller - 1.0 (Microsoft)


When I close the lid of my laptop it used to go to sleep. Now I have configured it to go to hibernate. In both cases when I lift the lid again, 50% of the time the laptop does not wake up smoothly and instead it goes into a reboot; and any open windows and files I have are gone.
All my drivers are up to date.
Any recommendations of what to do to solve this problem?
Thanks!

More replies
Relevance 79.13%

Since few days, maybe more I have a strange issue. When I wake up my laptop from hibernate/sleep the CPU is slow and all power plans R set to minimum power consumption and maximum battery life. It happens automatically and I need to reset a power plan to default. ;/ Am I alone with this issue?





T400 2768-CT7C2D P9600, 2x 4GB Kingston 1066MHz, 256MB 3470HD (1440x900), FUJITSU MHZ2160BJ G1 + HITACHI HTS541616J9SA00 (ultrabay), 5100AGN, BTT61 7664-1KU (died cause nVidia GPU fail)

Answer:T400 Low CPU frequnecy after wake up from hibernate/sleep

Hi
 
Welcome to the community.
 
As per your concern low CPU frequency occurs after wake up from the hibernate or sleep mode  So to recover from this concerned issue,I would suggest you to please update the Power Manager software and Bios of your system from the below mentioned web link.
 
http://support.lenovo.com/en_US/downloads/default.page?
 
Also choose the battery in the balanced mode.
 
After this, please restart the notebook and check if the issue resolved.
 
Regarding
Sameer





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

3 more replies
Relevance 78.31%

Hi,

On a 8 month old machine if I let machine go into hibernate/ sleep mode with power settings it will not wake up .

I can get it going again by removing and replacing the battery .

I have done a restore to a few days ago when this problem did not exist ..same result

Any offers ? Thanks

Answer:After hibernate/ sleep mode Tecra M11 doesn't wake up

Hello

Can you please tell us at first which notebook model do you have and which operating system do you use?

5 more replies
Relevance 78.31%

My laptop (Windows Vista 32 bit) is unable to wake up from sleep or hibernate.
Laptop is set to the Balanced Power Scheme.

However, once the display has turned off (after 10 minutes), I am unable to wake it up.
Unable to open Task Manager, Shut Down, nothing works, all I see is a black screen, the disk access light blinking and the fan running.

I end up holding the power button to switch off.
This is a recent development, it might have started when I installed Office 2010 on the laptop.

Any suggestions?

Answer:Satellite P300-13J doesn't wake up from Sleep or Hibernate

Hi

Since when did you notice this issue?
Was this issue present after clean system installation?

How about the BIOS? Is it up to date?
I read in some threads that BIOS update could helps to sort out such similar problems.
So BIOS update is definitely worth a try.

Also the display driver update would be recommended. Of course just in case you are not using the latest version.

By the way: is Win 7 an option for you? The Win 7 is much better and lot of different issues which appeared in Vista system, have been foxed in Win 7

5 more replies
Relevance 77.49%

I have  an E531 and when I hibernate or sleep the computer, either option, using power button or closing the lid it goes to a solid red light and will not wake back up.  The only resolution is to hold down power key and reboot. I've tried an external monitor, external keyboard, external mouse, etc.  nothing will get around this.  This is a recent problem, not sure what is causing this but it is constant, not intermittent.Thanks in advance for any advice. 













Solved!

Go to Solution.

Answer:won't wake from sleep or hibernate, solid light, no pulsing E531

Ok, This problem is resolved.  I purchased an Asus wireless router with wireless printing capability and installed wireless printing.  That caused the issue.  As soon as I unistalled my computer sleeps fine.Can't print wireless...such is life.   

1 more replies
Relevance 77.49%

I'm running Windows Vista Ultimate 64bit.
AMD Athlon 64 X2 Dual Core 4200+
Asus M2V Mobo

2/3 of the time when I return to my computer and move the keyboard/mouse to wake up, Vista will resume to the login screen but both my mouse and keyboard will not work. Both devices will have no power and there is no way to wake them up besides restarting the computer! Has anybody else experienced this problem or know of a possible remedy? I would be grateful for any help. Thanks for reading!
 

Answer:Keyboard Mouse not responding when I wake/resume from sleep/hibernate

6 more replies
Relevance 76.67%

I have TECRA A9 and it work fine but I found that when the laptop go to sleep/hibernate mode and after return to work on the laptop the network not working.
It keep the light on but there is no network and to solve it I need to restart the laptop.

Any help please.

Regards.

Answer:Tecra A9 - Network doesn't work after wake up from sleep/hibernate mode

This is a known issue so have a look on this website:
http://aps2.toshiba-tro.de/kb0/TSB8902FC0000R01.htm

Update the BIOS and then it will work.

2 more replies
Relevance 76.67%

Hi AllI have a problem with T470s. Sometimes after waking up from sleep or hibernate the USB 3.0 main concentrator hangs up what disallow to use fingerprint reader to log into the system. I have found a few suggestions on Internet but all of them were connected with Win 7, not Win10. When trying to install old version of driver Windows said something about wrong OS or somethin like this. Generally I was unable to insall old drivers. OS:   Microsoft Windows 10 ProVersion: 10.0.15063 Compilation 15063BIOS version: BIOS LENOVO N1WET32W (1.11 ), 2017-05-23BIOS Mode: UEFI I will appreciate any help or suggestions. Best regardsTomPal

Answer:T470s - USB3.0 Main concentrator hangs up when wake-up from sleep and hibernate

I also  have a new T470s and experience the same problem with the USB ports and Touch Screen after Sleep mode.After a restart everything works.

3 more replies
Relevance 75.85%

I am posting to this forum looking for a solution to this ridiculous problem of computer not waking up (monitor-wise) when it goes to sleep.  To recreate the issue I merely walk away from computer for 10 minutes or so, come back, monitor is dark.  If I hit any key the other 2 attached montors awake but the monitor on the W540 does not.  I am sick and tired of having to reboot to get it to wake. What I've done over past two months to fix this: Tried many of the suggestions here including going back to previous "Intel" driversTried the newest Bios update  This is a nagging and (in my opion) absolutley unacceptable problem to have.  It's like stepping back 15 years to the infancy stages of laptops.  I don't get it doesn't Lenovo have a QA department?  Obvisouly not. I hate to lump in mulitple problems and won't but I also want to say the touch pad is absolutely a failure.  These two problems make the W540 more of a burden than a help.  As it is now I would never recommend a Lenovo to anyone.   Wake up Lenovo, how many posts like these do you have to see and not do anything?













Solved!

Go to Solution.

Answer:W540 Sleep, Hibernate, Won't wake up, new Bios driver doesn't work (3/13/2015)

I've just resolved this by going back to the 21st May 2014 driver:http://www.opendrivers.com/download/driver-167436.html

8 more replies
Relevance 75.85%

After using w700 less than a week, I found another problem on the laptop.I am not sure that's a software or hardware issue, if some one has the same experience like me,please give me some advices: is this a common problem or what else?  Any time when the OS running, close the screen or click on sleep or hibernate with touch pad( touch pad with two botttom keys are fully function now). Re-open the screen, laptop wake up, the touch pad including bottom left and right keys then completely stop working at this moment. I have to use the other three keys above the touch pad with red-point to restart the computer.After the completely restart, the touch pad with two bottom keys works again. Very strange, is there any way can help me to fix the problem?  Thanks for your reply.













Solved!

Go to Solution.

Answer:W700 wake up from sleep or Hibernate model, touch pad completely stop working

Do you have all the latest drivers installed?

5 more replies
Relevance 75.85%

HelloI have a ThinkPad T420 with this characteristics: CPU: Core i5 2520mRAM: 16 GB CrucialGraphics: Intel HD and NVIDIA NVS 4200Storages:1. SAMSUN SSD EVO 850 (as OS disk in a brocket inserted instead of DVD ROM)2. WD HDD 320GB 7200 rpmI have worked for several mounts with this system perfectly and there was no problem. Newly, a bad problem has been appeared: when I put the system to sleep for a prolonged, the system won't wake up (the power LED flashing, Bluetooth LED and CPU fan being on). After force shutdown, in the boot process BSD error occurs and after several restart, finally Windows will boot. The BSD occurs when I turn on the laptop after a prolonged shutdown or hibernate also. I emphasize that the problem occurs when sleep conditions (or being turned off or hibernated) is for a long time (more than an hour) and in short time periods, there is no error!!!! The computer restart command works properly (shutting down via the Windows and booting again). I tried several solutions from internet search as followed without permanent success!1. Check disk (with /f and /r flags)2. sfc /scannow3. Power management modifications (disabling hybrid sleep, disabling HDD turn off, disabling hibernation, disabling wake up timer)4. Installing fresh Windows (Windows 7 and 10) several times5. Updating bios to the latest version6. Updating windows to the latest released updates7. Updating drivers to the latest versions8. Disabling intel SpeedStep technology from within bi... Read more

More replies
Relevance 75.03%

Sleep function is not consistent... While it works most of the time; yet the other times are frustrating when the result is reboot, reboot with blue screen or hang!Rgds,ME 

More replies
Relevance 75.03%

What's the problem ?
Is there any solution ?

(ideapad z580 windows 7)
 
Link to image
 
Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

Answer:ideapad z580 freezing screen with horizontal white stripes after wake up from sleep or hibernate

Hi Charfisoft,
                           
Welcome to Lenovo Community!
                                                     
As per the query we understood that you are facing issue with display freezing after resuming from sleep or hibernate in your Lenovo Z580 laptop.
 
Please try to uninstall the graphic driver and check for the issue.
 
Also try to update the energy management and check for the issue.
 
Click here for the energy management for windows 7.
 
Hope this helps. Do post back if issue persists!
        
Best regards,
        
Ashwin.S





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

3 more replies
Relevance 75.03%

My e5570 has the following isse.
When I put it to sleep or when it go's to sleep and I turn it on again the screen stays black.If I have a screen it does not respond to the keyboard or touchpad. It does respons to my external mouse.
Do others have this issue?
This way I'm forced to shutdown the laptop every time...

Answer:E5570 - WIN10PRO - Wake up from sleep/hibernate = Black screen or no responding keyboard/touchpad

Same issue here....brand new, had it about a week.   I've tried several different power/hibernate settings without success.     Screen shuts off as expected, but it doesn't reawaken...laptop is on and running, screen stays dark.    Rebooting is only option.

4 more replies
Relevance 70.52%

Sometimes this laptop refuses to come out of Sleep or Hibernate (blinking cursor) and will force a Startup Repair.

Occasionally BSOD's will occur but the previous issue mentioned is more prevalent.

Has been happening over the span of the last two months.


Appreciate any help, thanks in advance.

JD

Answer:BSOD or Failed "Wake ups" from Sleep/Hibernate/Restart

Please post the following report before we proceed:Windows Genuine and Activation Issue Posting Instructions

5 more replies
Relevance 69.7%

When I put my computer in sleep mode, it won't 'wake up'. I have to manually turn off the computer and then start it up again. This has happened twice. I'm not putting it into sleep mode until I find out what's wrong and that's exasperating as I normally leave my computer on all day so I can periodically play my games.

Answer:Computer won't 'wake up' after sleep mode with Windows 10, how can I wake it?

I'm having the exact same issue. No idea what to do.

5 more replies
Relevance 68.88%

Please delete - post needs to be rewritten

More replies
Relevance 68.88%

My PC is fairly new and I'm having problems with slow shutdowns/restarts and slow sleep/wakes. Recently it seems to fail waking altogether and restarts after a while instead. Usually during waking I just have a black screen for a long time before the reset/restart but sometimes I see the Windows log-in screen but it's unresponsive.
The problem predates my CPU undervolting and doesn't seem to change when I switch RAM settings back to Auto instead of XMP (I my RAM necessitates some kind of overclock in order to function at its rated speed).

Can anyone advise how to proceed? Thanks.
System specification below. This forum has a fantastic design that eliminates the form of pasted lists of information. That's just great for preventing people from reading it. I was worried someone might have read this information.
OS: Win 10 Pro 64-bitMainboard: ASUS Z170 Pro GamingCPU: Intel i7 6700 (6th gen), Stock HSF, Undervolt Offset -0.15 V, LLC 4RAM: Corsair LPX Vengeance 2x8GB DDR4-3000 (CMK16GX4M2B3000C15)Graphics: Gigabyte NVIDIA GeForce GTX 950Sys Drive: Samsung Evo 750 SSD, 250 GBData Drives: OCZ Vertex 2 SSD, 60 GB; WDC WD1002FAEX-00Y9A0, ~1 TB; WDC WD2003FZEX-00Z4SA0, ~2 TB; WDC WD2002FAEX-00MJRA0, ~2 TB; RAID 0, ~300 GB [Maxtor 6B160MO x 2]PSU: XFX TS 750W (P1-750S-NLB9)Bluetooth: Parani UD100 Bluetooth USB AdapterMonitor: LG 21.5" W2246S-BF 16:9 Wide LCD Monitor 1920x1080 5msLogitech G500 mouse, K120 keyboard.UEFI BIOS divergence from optimised default settingsAI Overclock Tune... Read more

More replies
Relevance 68.06%

W7 PC wakes up from sleep every few minutes. It didn't use to. I am the builder / owner / sole user. Investigation done so far at the DOS prompt to establish the cause:

powercfg -devicequery wake_armed
(no results returned)

powercfg -waketimers
There are no active wake timers in the system

powercfg -lastwakeWake History Count - 1
Wake History [0]
Wake Source Count - 0Other ideas to try and establish the cause with please?

Many thanks.

More replies
Relevance 66.42%

Ideapad U400Cypress touchpad driver 2.3.6.14 When I wake the laptop from hibernate, two windows appear, one has the title "Cypress TouchMon" and the other has the title "CyHidWin".  They have no controls on them, and I can't close them.  They don't appear in the taskbar or ALT-tab / Win+tab lists.  I believe these are processes related to the touchpad that are opening windows on resume for some reason. These windows don't seem to appear after a reboot or a resume from sleep. Any idea how to stop them appearing?

Answer:Wake from hibernate - two unclosable windows appear

hi ogsyit's wierd :/ but here is a possible solution hope it helps , open the "Task scheduler" and check if those proccessor's name exist and remove it , OR open run command and type "msconfig" without quotations and in the start-up tab check un-check them , please reply back if it worked or not





Lenovo Y570: i7-2630QM | 8 GB DDR3 1333 MHz RAM | Nvidia GeForce GT 550M | 750 GB 5400 RPM WDC HDD | Windows 7 Professional 64-bit

7 more replies
Relevance 66.42%

In Windows 7 I use Hibernate when I shut down at night as it starts up a lot faster when I re-start. However I keep finding that the computer has awakened itslf during the night for no apparent reason. Can anyone suggest what might be the cause of this and how it can be prevented from happening. ?

Answer:Windows 7 Hibernate wake up problem

Do you have Internet Security Suite installed, e.g., NIS, N360, KIS, McAfee, etc...? They can wake to "phone home".

Reset power options -
START | type power | "Power Options" | "change plan settings" | "Restore default settings for this plan"

Check Event Viewer - see what events surround the wake-up -
START | type eventvwr.msc | Custom Views | Administrative Events

Regards. . .

jcgriff2

`

5 more replies
Relevance 66.42%

In windows 7 I use Hibernate to shut down at night as I find it starts up quicker when I come to re-start. Howver I am finding that the computer often wakes up itself during the night. Can anyone suggest what might be causing this and how it can be prevented.?

Answer:Windows 7 Hibernate wake up problem

Hibernate is intended for use on laptops... if your PC is not a laptop you should avoid using it. Shut down at night and turn the power off... restart in the morning, your PC will last longer this way.

3 more replies
Relevance 65.6%

Have setup server as per THIS TUTORIAL and it is perfect for my needs.
What I now want to do is set it up so that when the first client starts in the Morning it wakes from Hibernate and when the last client shuts down at night it Hibernates.
Have messed about with it and can get it to work some times but need to get it to work all the time.
Any and all assistance will be most appreciated.

More replies
Relevance 64.78%

I usually only have multiple windows open in Chrome (which isn't very often anyways) so I don't know if this happens with any other program (I've never shut my laptop lid while other programs had multiple windows open that I remember), but it means that I have to close the windows in the wrong order because trying to rearrange them moves all of them at the same time...

For instance, I open a program so it appears in the taskbar at the bottom (this is on Windows 10 but it's happened on Windows 7), then I'll open say another window (like a new webpage but not as a tab, or an Incognito window), which I use in work scenarios, then when I go to a meeting I close the laptop lid (so it hibernates, but the problem also happens on sleep) and open it back up, the last window is now first and the order is reversed.

How do I fix this? It seems like Windows is opening each window in reverse order, which makes no sense especially since I can't rearrange them.

More replies
Relevance 64.37%

computer gets stuck in a loop when waking from sleep mode. as always I have to hold the power button so I can get it out of the loop but this last time
something caught my attention when booting up. a error message bios had crashed and loaded backup bios files. I hope I can find the help I need to correct this issue.

info that may be useful.
motherboard: GIGABYTE GA-X79-UP4
bios date: 7/16/2012
processor: intel i7-3820 @4.0GHz
RAM- 16GB [NOTE: system info only shows 8GB]

will supply system summaries on request

More replies
Relevance 62.32%

Hi,

I am new here. Hoping someone can help me out with this issue. I work in IT so am not a complete computer bonehead and am at my wits end with this.

My laptop is about 4 years old, it's a toshiba. For whatever reason, it started taking 5+ minutes to wake up from sleeping. If it sleeps for an hour, it's OK.. but if you leave it sleep all night and try to wake it up in the morning, it's quite cranky. After the 5+ minute wake up, it performs as normal. It was running Windows 7 Home 32 bit.

Troubleshooting steps that I have taken are as follows.

Reinstalled windows. Issue was resolved! but after about 2-3 weeks, issue came back. I thought maybe it was some type of windows update, so I reinstalled windows again and paid closer attention to the updates. Issue presented itself again after 2-3 weeks, and there were no updates immediately done prior to it starting.

I started to think maybe it was something related to my hard drive, so i performed laptop surgery and swapped out my original hard drive with a solid slate drive, and installed windows 7 Ultimate 64 bit (this laptop can support 64 bit so I figured why not upgrade.).

issue again was resolved for a few weeks, and now it's back to taking 5+ minutes to wake up again.

If you're turning the laptop on from scratch, it takes 10-15 seconds tops. if you're restarting, it's 10-15 seconds tops (man, I love SSD...)... if you're waking itup within the hour, its 1-2 seconds. But anything longer then that, 5+ minutes.

It ba... Read more

Answer:Laptop extremely slow to wake up from sleep mode, 5+ minutes to wake

Hi there, have you ran any malware/anti virus scans?

9 more replies
Relevance 62.32%

I have a Dell Optiplex 755 with WinXPPro SP3, 2GB RAM and an Intel Core 2 Duo E4600, and it is unreliable for Wake on LAN and Wake on Ring. I also wonder whether my Standby - Sleep - Suspend (S1 or S3) is working correctly.

When the PC is in Standby - Sleep - Suspend mode (S1 or S3), Wake on LAN and Wake on Ring work some of the time but not all of the time, and I'd like them to be 100% reliable.

These may be two different problems, but your advice will be appreciated. (Also, if I should post in a different forum, please advise.)

My Network Card is an Intel 82566DM-2 Gigabit Network Connection, and I recently upgraded its drivers using "generic" PROXP.exe from the Intel website, although this has not helped the problem. The specific driver file e1e5132.sys is now from 2009 -- it used to be from 2007. But, as I say, Wake on LAN from Standby was not and is still not reliable, both before and after the driver update.

In Settings .. Network Connections ... Local Area Connections ... Properties ... Configure ... Power Management, all the Wake on LAN options are checked ON:

- Wake on Directed Packet
- Wake on Magic Packet
- Wake on Magic Packet from Power Off State
- Wake on Link

The NIC card's Diagnostic checks are all OK.

My fax modem card is a Conexant D850 PCI V.92 Modem, and I have the most recent drivers dated 7/27/07, version 7.67.0.50. In Settings ... Phone and Modem Options ... Modems ... Properties, "Allow this device to bring... Read more

Answer:Trouble with Wake on Ring, Wake on LAN and Standby - Sleep - Suspend

More to above: Dell has suggested I must re-install Windows. I've never done that, and I realize I'd probably lose all my applications and data - no good. Seems to me that's like using an atomic bomb to kill a mosquito. And why should I assume that will work?

But is there a way to re-install -- or maybe fix -- Windows that leaves everything else safe?

FYI - About a month or so ago, I ran SFC (System File Checker) in repair mode, and that didn't help with this problem.

Any ideas?

1 more replies
Relevance 61.91%

Hi there,

A while back I had an issue when upgrading from Windows 8 to Windows 8.1 where the hibernate function stopped working. I went through my list of programs and drivers to remove and reinstall them over several days. Eventually, I gave up and within a short period of time it started working again.

Now that I've done the Windows 10 update (from 8.1), the issue is back. It only started maybe a few days ago, but I haven't installed any new software or hardware to cause it. Maybe a recent windows update ...

The hibernate button is present and I believe the memory is getting dumped to hiberfil.sys. Whenever I try to turn the computer back on though, it halts at the windows logo and shuts down. If I reboot from there, my hibernated session is gone. Putting the computer to sleep works just fine. Only hibernate is the issue. When I try to set my computer to No Auto-Restart on BSOD and try to hibernate it, it hangs at the windows logo and stops functioning altogether until I hold down the power button to reset it.

I've been digging through forums over the past few days and trying whatever I could find to solve the issue. Thus for, no such luck. Are there any suggestions I can follow? Other than this one issue, Windows 10 has been pretty solid for me.

I have already tried enabling/disabling hibernate, turning off fast boot, disabling password on wake, BIOS is up to date, sfc /scannow comes back with no errors, chkdsk also reports no errors, DISM seems to have fi... Read more

More replies
Relevance 61.91%

Every time I close my lid or explicitly hit the hibernate or sleep button the computer starts as if it was from a cold boot.  It takes about 25 seconds for it to get past the Dell screen also it seems.  I have a XPS 9950 with an SSD and I have tried turning off hibernate and resetting the power plan back to default without any effect.  A Bois update came out not too long ago.  Used to work without a problem.  Any ideas?  Should I just send it back for warranty support?  

More replies
Relevance 61.09%

My box is windows 8.1 enterprize x64, and I got a problem that don't wake up from sleep.

I attached three screenshots of event viewer. And for other informations you need, please explain and specify easily so that I can make it, and please understood I am not an expert.

Thanks in advance.

More replies
Relevance 61.09%

computer does not wake up, tried bios settings such as "space bar" wake up to no avail. Any help would be greatly appreciated!

Answer:no wake up from Windows 7 sleep

Ok, here we go:1- Is this a desktop or a laptop?Just so you know, sleep is basically ONLY used on laptops to preserve power.Have you tried just holding in the power button and letting it shut off?Some HELP in posting on Computing.net plus free progs and instructions Cheers

2 more replies
Relevance 61.09%

it freezes and i have to power off

More replies
Relevance 61.09%

Hi Guys,
would like some help/advice please. I have installed Win7 clean install on my computer, my problems is that if I leave mu computer for say 30+ minutes windows goes to sleep/hibernates and I find it hard to wake up normally have to reboot.

I have been through all the power management settings, and selected Never to all the selections in the advanced section, also in my power plan. I have even formatted my Drive and reinstalled win7 but still have the same problem.

When it is asleep, I have a halfmoon key on my keyboard, I have tried pressing this to wake it up but to no avail, also pressed the main power button, but this normally shuts it down.

Is there anything I can do to stop this happening, run a small program to keep it awake, or alter something in commands to stop it.

Your help and advice is really appreciated
Thanks and Regards
Bob

Answer:Windows goes to sleep and won't wake up

Hello metro5053, welcome to Seven Forums!



Have a look at the tutorial at the link below to see if you can find something that may help you resolve your issue; though it says Vista the principal is the same with Windows 7; be sure to keep us informed as to how it sorts out.

Power Options and Sleep Mode Problems - Vista Forums

9 more replies
Relevance 61.09%

I can't get computer to wake up any way I know of.
I have been forced to pull power cord, and that sure can't be good.

Answer:Windows 10 sleep, how can I wake it?

Why don't you set your mouse/keyboard to wake the computer?(go to device manager>mouse>Power management>select "Allow this device to wake the computer")

2 more replies
Relevance 61.09%

7 has been running perfectly since I installed it Jan. 2. Around Feb. 10 I noticed that I could not wake it from sleep, I would have to cut power, wait a bit, and then boot. When it boots however, it will prompt that it is "resuming windows" like it had been sleeping. All windows updates are installed and I have Panda Antivirus running along with Spybot (both show no infections or errors). I looked in the action center for errors and got the following message:



I think this is the problem, there were about 12 other listings of the error.

I'm not sure if it's just that my bios needs to be updated or what, so I'm just looking for any suggestions on what to do. (My bios hasn't been updated yet since the install of 7)

Some Specs:

MOBO is an ASUS P5WDG2 WS Professional
Dual Core 2.6ghz
6 gigs of RAM
8800GTS (driver version is 8.17.11.9621) aka 196.21
Creative SB Audigy 2 ZS (yeah, it's old)
[also I have a USB keyboard and a Bluetooth mouse that uses a USB dongle to connect]

Any help is appreciated!

Answer:Cannot Wake From Sleep in Windows 7 x64

*bump*

3 more replies
Relevance 61.09%

Hi

I've been searching for a while now trying to resolve this problem. There are loads of threads and I've tried loads of solutions like uninstalling and reinstalling drivers etc.

The situation I have is that Windows will sleep and wake perfectly fine if I use the remote that came with my TV tuner card but nothing else. If I try to wake it using the wireless USB keyboard I have it appears to power up but nothing happens. The power light goes from flashing to soluid but there doesn't appear to be any other movement. Equally when Windows Media Centre tries to wake to record it does the same thing.

Are there any suggestions of what I can try and what should I look at (and / or post here) to try and help debug?

Thank you in advance
Dean

Answer:Windows 7 won't wake up from Sleep

Dean,
Sometimes the batteries in my wireless mouse and keyboard go dead. Check those first.
I never have put my computer in sleep. I either use it or shut it off. IMO
Do a search in upper right hand corner for Windows Media problems.
Someone will probably be along to add other input so stay tuned.

3 more replies
Relevance 61.09%

I am using hp AY008TX when it on sleep, the  windows does not wake up, blur lines appear and backlight is on but it does not wake up.please guide me to sort this issue as i have reinstalled operating system still the problem is same.

More replies
Relevance 61.09%

Dell XPS 8700 BIOS A11 7/9/2015
Windows 7 Professional 64 bit
This is a recent problem. Windows will not wake up from sleep mode and when I force a restart Windows appears to start (resuming Windows), but then there is a blank screen and the system is locked up. I have checked all of the power settings and the mouse and keyboard are enabled to restart the system.
Any ideas?
Thanks,
Charles

More replies
Relevance 61.09%

PC will not wake from sleep - hard reset is required. I have tried enabling hibernate and it was better for a couple of days and then un-wakeable again. Anyone else having this problem?

Answer:Windows 10 - PC will not wake from sleep

Still got the issue, has no one got any ideas....?!
Can't believe no one else has had the problem.
Could anyone even suggest where to look.
Graphics card also keeps recovering from failure - NVidia Geeforce - it is bang up to date though.
Any help gratefully received...any help at all!

4 more replies
Relevance 61.09%

My computer will awake from sleep if it's in it for a short period of time. If it's been in sleep mode for a few hours, it won't wake up. I tried moving/clicking the mouse, pressing buttons on the keyboard. It won't even reboot/reset from the power on switch or the reset button. The only way to get it out of sleep is if I go and flip the power supply switch off and then on.
 

Answer:Windows 7 won't wake from sleep

Greetings, jkman.

You might try Control Panel > Power Options > Change plan settings > Change advanced power settings - look at the settings there, such as Hard disk, Sleep, USB, etc., see if you can disable anything that appears to affect your symptoms.





My computer will awake from sleep if it's in it for a short period of time. If it's been in sleep mode for a few hours, it won't wake up.Click to expand...

That leads me to believe that there might be some extended power setting that's causing the freeze.
 

7 more replies
Relevance 61.09%

I have done a Google search on this problem and have checked and re-checked all of my computer's sleep settings. All are set so as to enable mouse or keyboard wake up from sleep. I have checked my bios for any settings that would inhibit wake up from sleep.

Not only will my computer not wake up from sleep, but when I restart it after sleep (I must do a power off restart) it will not start properly. It prompts to resume Windows and then locks up. I can get out of this loop only by turning power off again. Other than this problem the computer works properly.

OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name CHARLES-PC
System Manufacturer Dell Inc.
System Model XPS 8700
System Type x64-based PC
Processor Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz, 3601 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date Dell Inc. A11, 7/9/2015
SMBIOS Version 2.7
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume5
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name Charles-PC\Charles
Time Zone Eastern Standard Time
Installed Physical Memory (RAM) 24.0 GB
Total Physical Memory 24.0 GB
Available Physical Memory 19.8 GB
Total Virtual Memory 47.9 GB
Available Virtual Memory 43.4 GB
Page File Space 24.0 GB
Page File C:\pagefile.sys
... Read more

More replies
Relevance 61.09%

Last few day windows been waking up by itself randomly, here's the screen shot of the problem, nothing's been touch when woke up from sleep either(mouse, keyboard)

Answer:Windows 7 wake up from sleep alone

Looks like Media Center update requested the wake.

2 more replies
Relevance 61.09%

Hello, i have a problem with my Win10 system 1607 Ver
When the system goes sleep, my keyboard and mouse got disabled but the power lights still works, so i need to push the restart or shutdown button to restart the system to make the wake up.
How can i make that the keyboard and mouse get worked by clicking on them and wake up the system instead of pushing restart or power button?
Sorry for my English.

Answer:Windows 10 does not wake up after sleep

It is an overly discussed topic about the S3 sleep state. If your bios is not set for Legacy USB devices, the OS is allowed to shut down the USB hub, wireless mouse and keyboard. You are going to have problems waking the system out of S3 state.

1 more replies
Relevance 61.09%

I choose SLEEP and my PC goes to sleep, and there is a light on front of my PC Unit that flashes.

But I can't wake Windows 10 up. I tried pressing all buttons on mouse and keyboard, nothing happens

What can I do please?

Answer:How do I wake up Windows 10 from Sleep?

If all else fails, you should be able to wake it up by briefly pressing the power button on your computer's case.

18 more replies
Relevance 61.09%

this just happened. no real changed to system except that i added more ram, but now my computer has the sleep and hibernate option greyed out

Uploaded with ImageShack.us
 

Answer:windows 7 sleep/hibernate preyed out

Do you have enough free disk space? Windows has to create a duplicate of your physical memory on the hard drive to hibernate (hiberfil.sys). If the amount of ram you added is more than the amount of free space left on your HD I could see this happening.
 

5 more replies
Relevance 61.09%

My laptop doesn't Sleep or Hibernate correctly after I upgraded from Windows 8.1 to Windows 10. When I put my laptop into Sleep or Hibernate, its screen and hard dive seem to turn off correctly but not its power light and fan that remain working, and It cannot wake up from Sleep or Hibernate by pressing any key or tapping the mouse. I have to press the power button for a while to cut off all power so that I can turn on and resume working again, all opened documents and programs still remain open only for Hibernation but not for Sleep. However, when I put it into sleep or hibernate again after the first issue, sometimes it works correctly if I do not leave it open too long. My laptop is: "HP Pavilion 15-p005tx Notebook PC, Model:G8E11PA"I have already proceeded through this following link but it does not work:http://answers.microsoft.com/en-us/windows/forum/windows_10-power/problems-in-shutting-downhibernate...   

Answer:Sleep and Hibernate issues in windows 10

Hello Joejab39. This is a known issue in windows 10 for some hp laptops. HP and Microsoft are aware of it and Microsoft is working on a fix which maybe released soon so keep checking the windows update and also the hp updates.Temporary fix: When turning off the laptop select restart and when it restarts, simply select shutdown within a minute of the restart and it will shutdown as expected so you will not have to force shutdown it time and again. I know it's a bit time consuming but works. Hope it helps

9 more replies
Relevance 61.09%

I am using Windows 7 x64 and normally my wife leaves IE8 open with multiple tabs. When the computer sleeps and is then reopened it just displays IE at the home page. IS there anyway to correct this to have the same sites open?

Thanks
 

Answer:Windows 7 Sleep/ Hibernate Question

This isnt really a Win7 thing. Theres an option in IE to reopen all tabs when IE is started.
 

2 more replies
Relevance 61.09%

Hi, please

Help with BSOD on my laptop when I hibernate and Sleep only by cable network.
When I stay at home by wifi i don't have any problems.


Is Windows 7 . . .
- x64 ?
- Original System
- OEM or full retail version?
- Product Full

- What is the age of system (hardware)? 6 months
- What is the age of OS installation (have you re-installed the OS?) 1 month

Attached files here.

Answer:Windows 7 x64 - BSOD on Hibernate and Sleep

STOP 0x0000009F: DRIVER_POWER_STATE_FAILURE Usual causes: Device driver

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\richc46\AppData\Local\Temp\Temp2_Windows_NT6_BSOD_jcgriff2[1].zip\Windows_NT6_BSOD_jcgriff2\092210-24429-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`043174c0?
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02a09000 PsLoadedModuleList = 0xfffff800`02c46e50
Debug session time: Tue Sep 21 16:12:37.710 2010 (GMT-4)
System Uptime: 0 days 1:29:16.023
Loading Kernel Symbols
...............................................................
................................................................
..........................................................
Loading User Symbols
Loading unloaded module list
.........
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

1 more replies
Relevance 61.09%

My (64 bit) Windows 10 desktop PC will no longer sleep or hibernate.

Instead, it shuts down completely.

How can I enable sleep and hibernate?

More replies
Relevance 61.09%

Hello,got a brand new T530 and restored Windows 8 with the two support DVD's and the Windows 8 DVD.The laptop runs fine but I can't put it to sleep or hibernate.If I do it manually the laptop sleeps or hibernates for about 30 seconds then wakes up again.I did a report with powercfg /energy and found this: System Availability Requestsystem Required RequestThe service has made a request to prevent the system from automatically entering sleep.Requesting ServiceCryptSvcSystem Availability Requestsystem Required RequestThe device or driver has made a request to prevent the system from automatically entering sleep.Driver Name\FileSystem\srvnet This would be bad because it's Windows own system services and drivers?!Anyone has this problem and know how to fix?            

More replies
Relevance 61.09%

Hi, the problem I have is not BSOD related (at least that's what I think, because I haven't seen it come up).

Sometimes, when I try to hibernate or standby my computer, the screen fades to black (as it should), but then it stays like that for about 15 min, then the laptop suddenly just turns off. When I turn it on again, it reboots and says it had a system error etc.

Do you know why this is happening? Sometimes it does work, but other times it crashes.

I have a Toshiba M300 Satellite notebook, running Windows 7 Ultimate x32 (retail upgrade).

Thanks, BL

Answer:Windows 7 keeps freezing when trying to hibernate/sleep

Hi BL5965,

Please refer to this Thread on how to post BOSD threads.

http://www.sevenforums.com/crashes-d...tructions.html

Regards Sean.

1 more replies
Relevance 61.09%

I have seen a lot of these topics around, but I can't see to find any that answer the question.

Windows 7 will will shutdown if I hold down the power button, however it will not shutdown when manually hitting "Shutdown" or just pushing the power button once. Everything looks normal when it's shutting down, it says it's shutting down. The lights on the case and fans go off, the fans shut off, yet a few seconds after the fans shutdown completely, the computer magically starts back up again. So it does shutdown (technically, all the signs are there) but it starts back up.

Aside from the shutdown feature not working, sleep doesn't work (I don't use hibernate because I don't want to waste SSD write cycles). When I put the computer into sleep mode, it shuts down the fans and lights, however just like the shutdown issue, the computer powers itself back on (wake on LAN is off). Even though it is powered on, it isn't out of sleep mode. None of the peripheral devices work and I can't get the monitors to turn back on, therefore I have to hard boot the computer by holding down the power button. When I turn the computer back on, it is back where I left it before I put it into sleep mode.

None of this makes since to me so I came here for help.

Side note: System Restore is turned off.

More replies
Relevance 61.09%

Hi I have two motherboards Biostar ta79gxe 128M with windows 7 RC 64 bit installed and a asus m4a785tc-v evo board with windows 7 RC 32 bit installed.

Both have the same sleep issue. The go to sleep the first time just fine and come back out. But the second time they just sort of freeze fans keep spinning for a while then the machine shuts down. When windows comes back up its says it detected an error and do I want to send it to Microsoft and I do. But have never been sent a solution back. Does this in S1 or S3 suspend modes and hibernate does the same thing.

Both machines have ati video cards and good power supplies and memory passes memtest86

I opened a ticket with asus but they just said I had bad memory or bad power supply. But now that I have the same problem with another machine I wonder if it's bug in build 7100. Probably have to break down and buy a release version.

Thanks

Answer:Sleep and Hibernate problems Windows RC

Trying to contact ATI about this issue but can't seem to create account at
AMD Global Services
I think it's the password that is failing





Quote:
A valid password consists of 6 to 8 digits with a combination of letters and numbers plus at least one special character.


What in the world is a special character. Tried several !?&^

1 more replies
Relevance 61.09%

My computer consistently crashes just before sleeping/hibernating or just after waking you. I have experienced this with SP1 and without. Before removing SP1, the HD will start churning around 17 minutes from leaving it idle. Almost exact to the minute, it will crash after 25 minutes from leaving it idle.
After removing SP1, the system will NOT crash before sleeping. However, it will crash as soon as you wake it up. Below are summary dumps for two representative crashes.

032011-28688-01.dmp 3/20/2011 4:45:38 PM (After SP1 was removed)
PAGE_FAULT_IN_NONPAGED_AREA 0x00000050
fffff981`0c002690
00000000`00000000
fffff880`0143f4e0
00000000`00000005
Ntfs.sys Ntfs.sys+c9836

031911-26317-01.dmp 3/19/2011 9:20:34 PM (Before SP1 was removed)
PAGE_FAULT_IN_NONPAGED_AREA 0x00000050
fffff981`13a02690
00000000`00000000
fffff880`01239460
00000000`00000005
Ntfs.sys Ntfs.sys+c47b6

I am attaching dump files and the Windows performance management report. As a background, the system:
HP Pavilion Elite m9400t
Intel Core 2 Quad Q6700 @2.66 Ghz
6GB DDR2 2400 (Micron Tech and Hynix Semiconductors)
ATI Radeon HD 3650
750 GB HD Samsung HD753LJ
OEM: Vista Ultimate x64
Current (academic): Win7 Professional 64 bit
H/w purchased November 2008
OS: brand new installation

Programs:
Besides Windows, I just installed Office, Chrome, Firefox. I installed but removed Fujitu's ScanSnap scanning software, Windows Live, Windows Security Essentials

Peripherals:
No peripherals are attached

Tests already ... Read more

Answer:Windows 7 64 bit crashes upon sleep/hibernate

It looks like ever single BSOD is the same. It's pointing at ntfs.sys which is leading me to believe you have some sort of corruption in your file system or hard drive.

Do a Disk Check
Run a HDD Test (using SeaTools)

And also do a Repair Install

9 more replies
Relevance 61.09%

I have seen a lot of these topics around, but I can't see to find any that answer the question.

Windows 7 will will shutdown if I hold down the power button, however it will not shutdown when manually hitting "Shutdown" or just pushing the power button once. Everything looks normal when it's shutting down, it says it's shutting down. The lights on the case and fans go off, the fans shut off, yet a few seconds after the fans shutdown completely, the computer magically starts back up again. So it does shutdown (technically, all the signs are there) but it starts back up.

Aside from the shutdown feature not working, sleep doesn't work (I don't use hibernate because I don't want to waste SSD write cycles). When I put the computer into sleep mode, it shuts down the fans and lights, however just like the shutdown issue, the computer powers itself back on (wake on LAN is off). Even though it is powered on, it isn't out of sleep mode. None of the peripheral devices work and I can't get the monitors to turn back on, therefore I have to hard boot the computer by holding down the power button. When I turn the computer back on, it is back where I left it before I put it into sleep mode.

None of this makes since to me so I came here for help.

Side note: System Restore is turned off.

~King
 

Answer:Windows 7 won't Shutdown, Sleep, or Hibernate

8 more replies
Relevance 61.09%

Thank you for your help.

Answer:BSOD when going to sleep/hibernate (Windows 8.1)

Uninstall VMWare. The drivers are ancient:

vmci VMware vmci Kernel 8/14/2009 2:29:14 PM
vmkbd2 VMware kbd2 Kernel 8/14/2009 4:32:41 PM
VMnetAdapter VMware Virtual Etherne Kernel 5/22/2008 3:33:07 AM
VMnetBridge VMware Bridge Protocol Kernel 5/22/2008 3:33:38 AM
VMnetuserif VMware Network Applica Kernel 8/14/2009 3:12:07 PM
vmx86 VMware vmx86 Kernel 8/14/2009 4:59:39 PM

Uninstall (probably to Intel SmartConnect):

tap0901 TAP-Win32 Adapter V9 Kernel 8/19/2010 3:07:37 PM

Update or uninstall:

HTCAND32 HTC Device Driver Kernel 10/26/2009 1:54:24 AM

Update Management Engine from Intel.com:

MEI Intel(R) Management En Kernel 9/22/2011 9:38:35 AM

Update or uninstall:

PTUMLBUS PTUML USB Composite De Kernel 9/21/2012 1:08:45 AM
PTUMLCVsp PANTECH UML290 Connect Kernel 9/21/2012 1:09:19 AM
PTUMLMdm PANTECH UML290 Kernel 9/21/2012 1:09:03 AM
PTUMLNET61 PANTECH UML290 WWAN (N Kernel 9/21/2012 1:11:14 AM
PTUMLNVsp PANTECH UML290 NMEA Po Kernel 9/21/2012 1:09:32 AM
PTUMLRMNET PANTECH UML290 RMNET S Kernel 9/21/2012 1:12:11 AM
PTUMLVsp PANTECH UML290 Diagnos Kernel 9/21/2012 1:11:40 AM

Update if possible:

SNP2UVC USB2.0 PC Camera (SNP2 Kernel 11/19/2012 7:02:00 PM

2 more replies
Relevance 61.09%

hello i have tray everything.bot nothing worked.my pc says this when i did a powercfg -energy.

Suspension USB: The USB device will not go to sleep

The USB device not entered in the state of suspension. Power management processor can be prevented if a USB device does not enter the state of suspension when not in use.

Device Name
USB Root Hub (usbport)

ID Host Controller
PCI \ VEN_10DE & DEV_026D

Location of the Host Controller
PCI bus 0, device 11, function 0

Device ID
USB \ VID_10DE & PID_026D

Door Way



Suspension USB: The USB device will not go to sleep

The USB device not entered in the state of suspension. Power management processor can be prevented if a USB device does not enter the state of suspension when not in use.

Device Name
USB Device Text Entry

ID Host Controller
PCI \ VEN_10DE & DEV_026D

Location of the Host Controller
PCI bus 0, device 11, function 0

Device ID
USB \ VID_09DA & PID_022B

Door Way
6


CPU Usage: Processor utilization is high

Average use of the processor during the screening were high. The system will consume less energy when the average utilization of processor is very low. See the processor utilization to the level of individual cases, to identify the applications and services that contributed most to the total processor utilization.

Average Utilization (%)
13:10


i disconnect everything from usb port.no luck. my pc is an hp pavillion dv6312 eu.windows 7... Read more

Answer:windows 7 dont sleep or hibernate

is it the pc or your usb you want to sleep/hibernate

5 more replies
Relevance 61.09%

The system does crash randomly and is not repeatable with anything found so far. One strange thing is that when the PC goes into sleep, the mouse is shut down, but when it goes into hibernate, the mouse is restarted and again shut down - this looks like it is waking the PC and causing the crash.

Answer:Windows 8 crashing on hibernate or sleep

Just noticed that if I change the Hibernate time under Advanced settings, Windows crashes when it starts sleep. After reboot, everything works and it is repeatable.

11 more replies
Relevance 61.09%

Hi
i have a problem with my computer.
It is an HP Pavilion dv5 1211em
i think thats what to say, and her is the problem signature:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1030

Additional information about the problem:
BCCode: a
BCP1: 00015205
BCP2: 00000002
BCP3: 00000001
BCP4: 82A879C6
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

I hope you can help me else i'll be kinda stuck.

Answer:Windows crashes after Sleep/Hibernate

  
Quote: Originally Posted by Ebbe


Hi
i have a problem with my computer.
It is an HP Pavilion dv5 1211em
i think thats what to say, and her is the problem signature:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1030

Additional information about the problem:
BCCode: a
BCP1: 00015205
BCP2: 00000002
BCP3: 00000001
BCP4: 82A879C6
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

I hope you can help me else i'll be kinda stuck.


Hi and welcome

we need the aactual dmp file. use these to find and upkoad it to us http://www.sevenforums.com/crash-loc...d-problem.html

thanks

Ken

4 more replies
Relevance 61.09%

I think it because of Intel Management Engine Interface (MEI) Driver or powercfg settings/power Option failure, need help to troubleshoot please, because i cant play my games like before.

More replies
Relevance 61.09%

I had problem dual booting win7 and win10. After many attempts I was able to dual boot.

But in the process, I deleted "system reserved" partition. So windows want start. I performed start up repair and it solved the problem. After that I reinstalled win7 ultimate which create "system reserved" partition again.

But the problem is hardware wan't shut down, hibernate or sleep. Windows shut down properly, but hardware remains active. I have to hard shut down it by pressing button.

Laptop model: HCL ME ICON L 1015
System Event log:

critical: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

Answer:Windows will not shut down, hibernate or sleep

well the system even log error is same (code 41 iirc) whenever you press the power-button instead of shutting it via menus. so that doesnt really tell anything but you already said, that you need to use power button to shut the computer down

8 more replies
Relevance 61.09%

getting bluescreen error in windows 7 enterprise 32bit after putting system on sleep or hibernating.
Can find dump file created after blue screen error at Download Dump File.zip from Sendspace.com - send big files the easy way


Error Code:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.4
Locale ID: 1033

Additional information about the problem:
BCCode: c2
BCP1: 00000007
BCP2: 00001097
BCP3: 08280006
BCP4: 86B081A0
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\050910-52853-01.dmp
D:\Users\302007381\AppData\Local\Temp\WER-89731-0.sysdata.xml

Please help.

Answer:Windows 7 - BlueScreen after Sleep/Hibernate

Unfortunately we can't analyze those dmps due to the lack of symbols for Windows 7 Enterprise.

From what I can tell, your VPN client was running at the time of the crashes. Dates 2007, it is ripe for an update.


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Jonathan\_jcgriff2_\dbug\__Kernel__\060410-40560-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0x82c1c000 PsLoadedModuleList = 0x82d64810
Debug session time: Fri Jun 4 02:05:19.311 2010 (GMT-4)
System Uptime: 0 days 0:34:55.796
Loading Kernel Symbols
...............................................................
................................................................
.................................................
Loading User Symbols
Loading unloaded module list
..........
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

2 more replies
Relevance 61.09%

Just got a new desktop with Windows 8.1 installed. Was originally having some issues getting the computer to go into hibernate and read online to try disabling some of the homegroup settings since I'm not even connected to a homegroup.
Now, no matter what I do, the computer hibernates between 2-3 minutes after going to sleep. When I say sleep, I mean I can move the mouse to wake the computer up and at least one of the fans is still running. About two minutes later (if I leave the computer asleep), the fan will shut off, I can hear it power down, and I have to hit the power button to turn the computer back on, which takes me back to the screen I left it on (the same as sleep).
I have tried going into advanced power options and completely disabling hibernate, changed the hibernate time to much longer, turned off hybrid sleep, changed how long it takes the computer to sleep, restored to default power settings - nothing seems to work, it always hibernates 2-3 minutes later.
I do want the computer to hibernate eventually, but not 2 minutes after going to sleep. I would like it to do something like sleep after 20 minutes and hibernate 20 minutes after that. I have also noticed if I manually go up to power, right click and choose Sleep, it shuts all the fans off and requires the power button to be pressed to turn on like it's "hibernating." Does anyone have any ideas? This is extremely frustrating.

Answer:Hibernate/Sleep Issue Windows 8.1

Not sure if this will help or not, I opened a cmd.exe and typed "powercfg.exe -h off" This completely removed the hibernate option from the Power Options, however the computer is still doing the same things described above.

1 more replies
Relevance 60.27%

Hi everyone. I'm new to the forum. Just bought a Windows 7 PC today. After setting it up, it looks as if Windows 7 takes longer to sleep and wake up than Vista. Here's how I compared the two:

1) We have a recently purchased HP running Vista, 8GB DDR3 RAM, 1 TB hard drive, and an AMD Phenom II X4 910 processor. With just Windows and Firefox running, the computer takes 6 seconds to sleep. Wake-up takes just under 5 seconds.

2) Today, we purchased the latest version of the same HP computer -- so the same processor, RAM, etc., but running Windows 7 (by the way, it's a long story why we have two of the same in our house). With just Windows and Firefox running, the computer takes more than 3 times as long to sleep -- 20 seconds. Wake up takes just over 10 seconds.

Any ideas what might account for this? Certainly, the operating system is different, but I guess I was expecting basic Windows functions to be faster, or at least as fast. Would anyone with Windows 7 mind timing their sleep and wake-up modes? I'd be curious to know if your sleep/wake times are similar. Thanks.

Answer:Windows 7 Seems Slower to Sleep and Wake Up

This has had several threads. You might want to use the search at the top of the page and read through some of them. I don't kknow you'll find what your looking for but it's a start. Fabe

9 more replies
Relevance 60.27%

I'm using a Bluetooth keyboard and Bluetooth mouse when I put it to sleep I can't wake up unless I press my start botton I should be able to wake up either touching the keyboard or moving the mouse

Answer:I can't wake up windows 10 after sleep mode

Welcome to Windows Central.
There are mixed findings/opinions and suggestions on this matter since the issue could be a result of a mixture of different issues, such as hardware settings, drivers, software settings and configurations, etc. Some of the solutions worked for others while not working for others. Some of the ideas discussed are:
1. If you let your PC sleep using a hardware button, then that same hardware button should be able to wake the PC up.
2. If you've allowed your PC to wake up through USB in the BIOS, then put your PC to sleep and then unplugged any USB device attached to it while it was sleeping, then that PC won't wake up unless the hardware power button is pressed. This could also be applicable to Bluetooth devices, since Bluetooth may be temporarily disconnected when the device goes to sleep.
3. If your PC had a custom manufacturer-specific software (e.g. Samsung Control Center) that allows the laptop (what device are you using, by the way?) to wake up when the lid is opened, then this feature was completely removed in Windows 10 brought about by the uninstallation of that software. You would need to re-install that software, run it in compatibility mode for a previous version of Windows and then re-enable the said feature.
Should you wish to provide us with more details or ask further questions, please don't hesitate to create a Windows Central account and respond to this thread.

more replies
Relevance 60.27%

Drivers and windows are up to date. Please help as this is a bizarre issue.

Answer:WIndows 10 - Wake from Sleep Issues

Can no one help?

7 more replies
Relevance 60.27%

Hi folks. I'm having a little weird problem. This is a new system and you can see the specs in my sig. Everything is going well, and there are no problems whatsoever, except for a little weird one. Whenever the pc goes to sleep, it will not come back to life normally. I'll just have to restart it. This is what happens exactly:

Note: It doesn't happen if the PC just went to sleep, i.e. it will wake up if for example it went for sleep like a 5 seconds ago.

I come after a long day at work, and the PC will be sleeping. I'll move the mouse and the screen will come back up but only the mouse is responsive. I can only move the mouse cursor....That's all. If I press Ctrl Alt Del to enter task manager, it will bring me that page where I can choose task manager, log off, switch user...etc. And that will be it. I will not be able to do anything after that. The whole PC will freeze(after I click on task manager for example) and i will no longer be able to even move the mouse or hit Ctrl Alt Del combination to get into task manager.

I thought this might be because of my overclocking but it happened even at stock settings so it is not overclocking related. The only thing I can do is to fully disable sleep mode in both windows and BIOS(I think) to overcome this. This is just a workaround and not a solution.

Anybody have seen this before in windows 7 ? Suggestions? Comments?
Thanks.
 

Answer:Windows 7 fails to wake up from sleep

1: test your hdd with hd tune or hd sentinel to see it there are any communication or sector problems.
2: disable all background programs and see if the problem continues. if not start adding stuff back unit it happens again.
3: update your bios.
4: my preference, stop using sleep mode and turn it off. it can't take that long to boot?!

stand by/sleep mode has always been a PITA!!
 

4 more replies
Relevance 60.27%

The only way my pc wakes up from sleep is by pressing the power button. The keyboard/mouse will not wake the pc up from sleep.

I have tried all the troubleshooting/Youtube tips/device manager settings and nothing will wake my system from sleep, other than the power button.

I also tried a different keyboard/mouse which plugged into a USB port and that would not wake my pc up either.

I also tried different power options settings and nothing worked.

Here is my hardware list: ASUS Z87 Deluxe/Quad motherboard with 16 gigs of RAM; Samsung 950 PRO M.2 SSD plugged into a PCIe slot (used ASUS M.2 X4 adaptor); cpu is the intel i7-4770K; video card is the AMD Radeon HD7700.

So I was wondering if there are any other tips which would get my keyboard or mouse to wake my pc up from sleep?

I don't want to wake it up from my smart phone.

thank you.

More replies
Relevance 60.27%

When my Windows 10 system goes to sleep ESCape or POWER button does not get it woken up from sleep. I need to give it a hard reboot (8 seconds press of power button) and restart the system.
Hardware: HP Probook
Any solutions please?

More replies
Relevance 60.27%

Have an annoying problem after upgrading to windows 10. I can put the laptop to sleep, but when i start up again, the laptop springs to life, but the screen stays off. I have to do a hard reset (hold power button) and start again.
Thoughts??

Answer:Windows 10 - goes to sleep - doesnt wake up

Any thoughts on this?

2 more replies
Relevance 60.27%

Hello

I have windows 8.1 and noticed that my pc wont wake up from sleep after a long time. For example afte 10-20 minutes it wakes up. But after 1 hour it wont wake up. Even if i disaple sleep mode, the monitor wont wake up.

I have tried sever things that found online thought I have not yet been able to solve the problem..

Any ideas??

Thanks!

Answer:Windows 8.1 wont wake up from sleep

hello ,it maybe be that the harddrive is set to turn off and you are not doing the right function to trun it back on ,try settin to not turn off ,see pic

5 more replies
Relevance 60.27%

Can someone help please?  I literally just got my Flex 3, with Windows 10 and it won't wake from sleep.  I have to hard power it off then restart it.  I have read forums and changed all my settings so that it neer goes to sleep, or I hybernate it, or just turn it off when I am done, but that isn't really a solution, it's just a bandaid.  I also read about updating the intel graphics drive, which I did and it fixed it for about a week but now it is back to the same thing and won't wake from sleep.  Can anyone help please?  I love my Flex but not waking from sleep is quite annoying as I don't want to just leave my computer off or on at all times.  I use it frequently and don't want to have to shut it down or just leave it on every single time I don't use it.

More replies
Relevance 60.27%

Hi,

I've recently been having problems with my computer having BSOD after a few minutes whenever it is woken from sleep/hibernate.
I have run memtest 86 and everything came back fine.
I have updated to my latest mobo BIOS.
I have updated my video card driver.
But still the problem remains, I have attached my dump file and my system details are as follows:
-Windows 7 Home Premium 64-bit
- AMD Phenom 9650 Quad-Core 2.3Ghz
- 4GB RAM
- Motherboard ASRock K10N78FullHD-hSLI R3.0
- Integrated Nvidia GEForce8 series 512MB

I have googled the symptoms so many times but cannot seem to find anything that works, any help would be greatly appreciated.

Thanks,
Phil.
 

Answer:Windows 7 BSOD on wake from Sleep

7 more replies
Relevance 60.27%

Hello,

I'm uploading the report for this issue. I've had several BSOD's from sleep, during (after I had walked away from this system), and after installing Quickbooks.

This is a brand new system with Office 2007, Acrobat X, Virus Scan Enterprise 8.8, and Quickbooks

I did all the Microsoft updates prior to installing Quickbooks

Any help is appreciated,

Thanks,

Kimrell

Answer:BSOD windows seven wake from sleep

Welcome To SevenForums.

McAfee is a frequent cause of BSOD-s (specially in the situation you describe). Consider uninstalling it with the McAfee Removal Tool and replace with Microsoft Security Essentials (To test)How to uninstall or reinstall supported McAfee products using the Consumer Products Removal tool (MCPR)McAfee Removal Tool - McAfee Uninstaller

Microsoft Security Essentials. Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-
Microsoft Security Essentials - Free Antivirus for WindowsMalwarebytes : Malwarebytes Anti-Malware removes malware including viruses, spyware, worms and trojans, plus it protects your computerGood and Free system security combination.


   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Perform a System File Check:Click on the start
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker
Disk Check on your hard drive for file system errors and bad sectors on it:Disk Check
Reduce items at start-up. Nothing except anti-virus is required:Startup Programs - Change
Troubleshoot Application Conflicts by Performing a Clean Startup
e1c62x64.sys Intel(R) 82579V Gigabit Network Connection driver which you... Read more

4 more replies
Relevance 60.27%

Since computer is only slow after wake-from-sleep, and fast again after restart.
I thought it would have something to do with driver or sleep state. So I dumped
reports before and after sleep
powercfg -Energy -output c:\temp\energy_orig.html,
powercfg -Energy -output c:\temp\energy_slow.html

Here are the differences

CPU Utilization:Individual process with significant processor utilization.
This process is responsible for a significant portion of the total processor utilization recorded during the trace.
Process Name System
PID 4
Average Utilization (%) 21.38
Module Average Module Utilization (%)
\SystemRoot\system32\hal.dll 19.45
\SystemRoot\system32\DRIVERS\usbehci.sys 1.69
\SystemRoot\system32\DRIVERS\yk62x64.sys 0.10

I am new to this forum. Please let me know what else I need to provide. Thanks in advance!
 

Answer:Windows 7 slow after wake from sleep

Hello,

Please follow this topic and attach required reports

http://malwaretips.com/threads/preparation-guide-before-requesting-malware-removal-help.20334/
 

6 more replies
Relevance 60.27%

My computer running windows 8 and it cannot wake from sleep most of the time. When I built this computer last year, it can wake from sleep 9/10 times. However, now, almost every time I try to wake my computer from sleep, it crashes. This is what I notice when the computer is about to crash when waking from sleep: Power button is pressed, GPU fans and direct PSU connected fans spin up. Fans connected to Mobo do not spin up. Power button continues to blink even as if still asleep.

I strongly suspect it's the Mobo that is causing the sleep problems. The Mobo have been dropped and 6 out of the 10 sata ports do not work properly. I tried different bios versions and the latest version, and reset all values to default( no oc, xmp), and sleep problems still exist. The PSU and GPU have been tested with another setup with no problems. I tried another operating system and same sleep problems exist. Windows mem. diagnostics passed. Before I go out and buy a new mobo, I want to be 100% sure that my problems are caused by my current mobo.

More replies
Relevance 60.27%

A quick comparison I did today between nearly identical machines reveals that Windows 7 might take longer to sleep and wake (unless I've got a hardware issue).

A recently purchased refurbished HP computer running Vista with 8GB DDR3 RAM, an AMD Phenom II X4 910 processor, and a 1TB hard drive. Sleep mode activates fast -- about 6 seconds. The computer wakes in less than 5 seconds.

Today, we got essentially the same computer (same specs), but the newest version with Windows 7 preinstalled (long story about why we needed another one). Sleep mode on this unit takes more than three times as long -- 20 seconds, while waking takes just over 10 seconds. (Plus, both sleep and wake are "louder").

I'm very curious to know what might account for this. I expected basic Windows 7 functions to be faster, or at least equally quick. (By the way, I compared both with the same program running -- just Windows itself and Firefox.) A slower sleep time isn't necesssarily an issue, but just something I noticed and am curious about (as I tend to keep my PCs in sleep mode and don't shut them down).

Answer:Windows 7 Seems Slower to Sleep and Wake Up

32 or 64 bit?

9 more replies
Relevance 60.27%

Hi!

Recently i brought an HP dv6-3180sp Laptop and format the hard drive and install my version of Windows (Windows 7 Ultimate x64).

But i have a problem with the Sleep mode in my computer.

When i put it to Sleep when open the lid the Biometric device to login does not work and if i insert the password i receive a empty screen.

If I want to work again i need to force a shut down. And power on again.

I don't know how to resolve this trouble.

Someone can help me?

Regards,

cs.oyen

Answer:Problem When Windows Wake Up from Sleep

Someone?

7 more replies
Relevance 60.27%

Installed Windows 8 about a week ago - it worked fine for a few days but now crashes/restarts upon wake up from sleep. There is a 'Kernel Power 41' in the Event Viewer log. Have attached the Diagnostic Tool output file for reference. Really appreciate the help.

Answer:Windows 8 crashes on wake up from sleep

Download and update AMD Catalyst for your ati radeon hd 5570. The latest version is 1/23/2013, yours is dated 12/19/2012Temporary uninstall AVG anti virus completely

2 more replies
Relevance 60.27%

HelloI have windows 8.1 and noticed that my pc wont wake up from sleep after a long time. For example afte 10-20 minutes it wakes up. But after 1 hour it wont wake up. Even if i disaple sleep mode, the monitor wont wake up.I have tried sever things that found online thought I have not yet been able to solve the problem..Any ideas??Thanks!

Answer:Windows 8.1 wont wake up from sleep

Have you tried hitting the power button.
It varies from one machine to the other, but I have a few here that react that way.

4 more replies