Computer Support Forum

Failed Update 0x800706be driver...but device mgr shows updated driver?

Question: Failed Update 0x800706be driver...but device mgr shows updated driver?

I tried to update my older Radeon ATI 5450 GPU via windows update...

I received the message from windows update, and showed it failed update with the 0x800706be

However when I go to device manager and check the details of the installed driver it clearly shows the new updated version? So I wonder which is correct the device manager showing the new version of the driver or windows update?

Relevance 100%
Preferred Solution: Failed Update 0x800706be driver...but device mgr shows updated driver?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Failed Update 0x800706be driver...but device mgr shows updated driver?

You can identify the problem using Device Manager, which you can access by:
Opening the Control Panel Window
Selecting and double-clicking System
Clicking Device Manager
In Device Manager check if there is an exclamation point, a yellow triangle, or a question mark against your Dell device. If there is, there is a problem with your Dell device.

2 more replies
Relevance 91.02%

Hi everyone. I just bought myself a new barebones computer and it doesn't have the driver for the ETHERNET CONNECTION or the USB WIFI ADAPTER I purchased for it.
 
The problem here is that I ran the installer for the WIFI adapter (right off of the CD that it came with) and restart the computer as instructed, but after restarting the WIFI adapter still shows that it has no driver in the device manager.
 
I took like 4-5 screenshots of what I am seeing on my computer to try and make this easier to solve. (Please view attached files)
 
I don't understand why the installer for the driver wouldn't naturally connect the driver with the device that it was meant for?
 
I am on my laptop right now, but can't connect to the internet with my new desktop because there is no Ethernet driver and my WIFI driver apparently isn't correlating with the device it was meant for.
 
Please help someone .....

Answer:New Computer. Ran driver installer - device still shows no driver?

Hello, and Welcome to BC
Right click each device in Device Manager. Select Properties. Under the Details tab select Hardware Ids. Copy and post the first line from each device.
 
Is Windows 7 32bit or 64bit?

9 more replies
Relevance 89.79%

I saw this while debugging my Y50-70 (windows 8.1 x64) which had shut down issues Need expert advise on which lenovo driver is this "lenovo HID"

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000

Got the same problem...Lenovo Z50-70Win 8.1 x64 The device sometimes doesnt correctly shut down.Display = black and LEDs are on. Need to turn it off "hardcore" via pushing the power button ca. 10 seconds. What the hel is going on? Windows says: The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000I installed all Lenovo drivers.

3 more replies
Relevance 89.79%

I have a problem with my ThinkCentre E72 (Windows 8). Suddenly, it shuts down with "shut-down" screen. Later, in my Event Viewer, I found the following System Warning:"The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001" where the source of problem is Kernel-PnP. Only thing that is plugged in my computer is mouse, keyboard and monitor. Many thanks,Matija 

Answer:E72 - The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001

In case anyone else is affected by this, please have a look at my post in Kernel-pnp (PLEASE HELP). Best regards // ThinkErEr





ThinkCentre M900 Tiny, i7, 16GB, Samsung 950 PRO M.2 NVMe 512GB

1 more replies
Relevance 89.79%

trying to fix audio problems, volume control states that no audio output device is installed, i downloaded the appropriate driver from lenovo site, also downloaded two seperate versions of conexant, the installation process begins but is cut short and the following message displayed..."driver instalation failed could not find the MEDIA device for this driver" can anyone offer some advice?

Answer:R61e "driver instalation failed could not find the MEDIA device for this driver"

nath, welcome to the forum, have you installed the UAA HD audio driver? You can find it by scrolling down a bit on the R61e Audio Driver Site, please ensure you follow the instructions.  Hope this helps

2 more replies
Relevance 89.79%

Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)




Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.


Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

2 more replies
Relevance 89.79%

Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)




Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.


Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

0 more replies
Relevance 89.79%

I am seeing several of these Warnings in the Event Viewer, Windows System logs. These are Event ID 219, Source Kernel-PnP.

That said, I am not experiencing any crashes, freezes, BSODs, and everything on my PC seems to be functional. So perhaps I can safely ignore these warnings, but I prefer to get to the bottom of something in case it will lead to problems in the future.

I have done some online research on this event, and none of the suggested fixes seem applicable to me. I have been vigilant in keeping all drivers on my machine up to date. I've checked, and there don't seem to be any newer drivers available for any of my hardware. I also have the Windows Driver Foundation - User-mode Driver Framework service set to "automatic" startup.

The details of this event are below.

Any suggested action to remedy my problem? Thanks!

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

- <System>

<Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />
<EventID>219</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>212</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2017-01-01T19:23:45.837466800Z" />
<EventRecordID>51641</EventRecordID>
<Cor... Read more

Answer:The driver \Driver\WudfRd failed to load for the device ROOT\WPD\0000?

Go to Start/Search and type devmgmt.msc, right click the devmgmt results and Run As Administrator. In the Elevated Device Manager, are there any devices with yellow flags? If so, these devices need drivers installed. Usually your video card driver.
https://social.technet.microsoft.com...ernel-pnp.aspx

3 more replies
Relevance 89.38%

My PC started BSOD-ing a few days ago and now does it every few hours.

It starts with this error:

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_Multi&Prod_Flash_Reader&Rev_1.00#058F63666471&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}.

Then moves on to:

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_Multi&Prod_Flash_Reader&Rev_1.00#058F63666471&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}.

Then:
Installing printer driver Microsoft XPS Document Writer failed, error code 0x0, HRESULT 0x80070705. See the event user data for context information.

Then:

The print spooler failed to regenerate the printer driver information for driver Microsoft XPS Document Writer for environment Windows x64. Win32 system error code 1797 (0x705). This can occur after an operating system upgrade or because of data loss on the hard drive.

Finally:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xffffffffc0000005, 0xfffff80c5d0d15b0, 0x0000000000000000, 0xffffffffffffffff). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: d35c98fc-b1e6-4003-bed9-f7cdbca575e2.

This started happening a few days ago, right after a new update from windows:

Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3201845)

Answer:BSOD - The driver \Driver\WudfRd failed to load for the device SWD\WPD

Please check MSI for BIOS updates and update every driver that is possible from MSI.

3 more replies
Relevance 89.38%

Hi,

Since the 11/18/2012 event viewer (Event ID 219, Task Category 212) has been posting a warning:

The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN (followed by name of USB device)

It only occurs on start up if I have a USB memory device plugged into a USB port. The USB memory device functions perfectly and the error never occurs when I plug in and out a memory device after boot up.

The error only occurs for memory devices like memory sticks, external USB hard drive does not cause this error.

Checking back to around the 11/18/2012 I see nothing that I have changed/installed that might indicate something that has caused this. No other Windows 7 failures or issues.

Booting a second hard drive with windows 7 on the same system (I have this second installation for testing faults etc), the issue does NOT occur.

From checking forums and searching I have found a few others with this issue and a few articles on its cause

WUDFRd failed to load for the device

Event ID 219 is logged after you install Windows 7 or Windows Server 2008 R2

I was just curious as to why it would suddenly start occurring after a particular date when as far as I can tell I have not made any changes to anything around this date.

Also I wondered if there was a fix to stop this, other than removing a memory stick before boot up!

Any thoughts?

Answer:The driver \Driver\WUDFRd failed to load for the device... error

I just started getting this exact same error message logged in Event Viewer when I plug a USB stick into a USB port. It happens with two different sticks from two different manufactures, but it does not happen every time I plug them in. It seems that it may mostly happen the first time I plug a stick in after I have booted up my PC.

Have you been able to find a solution to get these error codes to stop logging?

9 more replies
Relevance 89.38%

This has been a problem for over a year now. 140+ identical PCs running identical images, with identical keyboards. Some have the problem, some do not, and it's incredibly unpredictable.

PCs are HP Compaq Elite 8300 SFF running Windows 7 x64 Professional.

People will be working at their PC, hear the USB disconnect sound, and their keyboard will become unusable for 30+ seconds.

An Event with ID 219 is created in the Event Log:

Log Name: System
Source: Microsoft-Windows-Kernel-PnP
Date: 2014-03-31T16:15:30.226
Event ID: 219
Task: N/A
Level: Warning
Opcode: Info
Keyword: N/A
User: xxxxx
User Name: NT AUTHORITY\SYSTEM
Computer: xxxxx
Description:
The driver \Driver\kbdhid failed to load for the device HID\VID_03F0&PID_0324\7&3c64d09&0&0000.

For those affected, the frequency of the error runs anywhere from 10 times a day to once every few weeks.

Re-imaging the PC has no effect but that same image running on another PC with the same hardware can run without ever experiencing the problem. The system I use has not experienced the problem once in over a year.

I have rebuilt the image from scratch and pushed it out to a group of people experiencing the error. It seemed to resolve it for a few months and then the errors inexplicably came back. I've tried replacing the keyboards with completely different models. Again, it seemed to resolve it for a while and then it came back.

Moving the keyboard to different physical ports has no ef... Read more

Answer:Out of ideas - The driver \Driver\kbdhid failed to load for the device

I know this may sound simple; but have you tried completely uninstalling the keyboard from device manager; then let windows reinstall it? That may fix the issue. If not then post back.

4 more replies
Relevance 89.38%

Hi , I just reinstalled my SL500 but i got a problem.I download the lastest audio driver from lenovo site and i've got this message Driver Installation Failed : Could not find MEDIA device for this driver....I've searched everything i could find in google and the forums but i've got nothing... I'm usin Win XP 

More replies
Relevance 89.38%

Hi
i have a couple of weeks ago installed windows and i just got bsod crash and this was the only error in the event viewer
The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_GENERIC&PROD_USB_CF_READER&REV_1. 01#18E3312D81B&1#.

after looking at the minidump i thought it was due to a usb vidio/audio capture device so i tried updating the drivers and windows update couldnt find any and i cant find any online.

could some one help me and check my dump file to see if im right.
thanks

Answer:The driver \Driver\WUDFRd failed to load for the device error

Hi bftdsh.

A stray crash dump is not enough. Click on the button below ....



It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums

9 more replies
Relevance 88.56%

Awesome.I have a 1 week old X220 that had its C drive wiped tonight by the current driver package that is still listed on Lenovo.comhttp://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7zwb01ww.exe  

Answer:Bluetooth driver update failed on Windows Update - driver from lenovo.com wiped C drive

@jeffmik,There was a post on tweeter from you saying that the BT package from Windows Update wiped your C:\ too? Is it the one from MS or from Lenovo which wiped the C:\? Also there is a new driver from engineering which have fix this issue. We are currently pending the team to update the website. You can download the BT driver directly from the link below.http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7zwb05ww.txthttp://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7zwb05ww.exe//JameZ

5 more replies
Relevance 88.56%

I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.

Answer:The driver \Driver\WudfRd failed to load for the device .......

Disabling hard disk hibernation solved the problem for me.

Just go to Power options -> Advanced Settings -> Hard Disk -> Turn off hard disk after -> Never

Hope it helps

Gal

9 more replies
Relevance 88.56%

Hi,

I'm been having issues a looong time with different sorts of BSOD's but I've been able to cook it down to this last one after replacing both graphics card and Logitech headset.

Latest error which occuring at least once per day:
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{01539fd4-4f12-11e4-824c-806e6f6e6963}#00000000007E0000.

This happens very random and I'm really lost here.

Thanks! / Micke

Answer:The driver \Driver\WudfRd failed to load for the device

Hi Frostflake,

Welcome to the 10forums.

Please uninstall Avast and use Windows Defender as alternative.
Avast - Uninstall Completely - Windows 7 Help Forums


Code:
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys

ffffd000`22a74e98 fffff801`8ed3493cUnable to load image aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0x5493c

8 more replies
Relevance 88.56%

I have this computer what for some reasons wont install USB Smartcard readers.
Its Win7 64.
I have tried different smartcards but they wont help, also i tried to install drives manually but still wont work. I uninstalled and installed drivers many times.

Also i tried, but didnt work:
Change the 'Windows Driver Foundation - User-Mode Driver Framework' from 'Manual' to 'Automatic'.

Also the error from events.
http://i.imgur.com/hP7Mu3L.jpg

I found something like this.
https://svn.eesti.ee/projektid/idkaa...r/atrfiltr.inx

Should i try it or would it be easier to just format the computer. Its a work pc and it wont take long time, there isnt that much stuff on it.

Answer:The driver \Driver\atrfiltr failed to load for the device...

Update Chipset and USB controller Driver.
It would be helpful if you can send us a screenshot of Device Manage while Card reader is connected.

3 more replies
Relevance 88.56%

Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`

Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)

This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:

I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.

My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):

Anyone else run across this condition or have a known solution using the latest driver?

Thanks,

aardvark

More replies
Relevance 88.56%

I'm getting this error once a day, where my computer crashes, and the only way to turn it off is to reset it and turn off my charger so I can turn it on again. What can I do?

Answer:The driver \Driver\WUDFRd failed to load for the device

anyone?

1 more replies
Relevance 88.56%

*** Problem has reappeared, so this is NOT a solution ****
It worked for 5 reboots, so strange it reappeared

Been searching for days to find a solution for this problem (including fresh installs of Windows 10 etc), and today accidentally found it ... for my Asus Maximus V111 Formula at least, but it may also work on other motherboards

In BIOS, ensure that the XHCI Hand-Off is set to ENABLED (default is disabled)

I changed this, and now I can boot the system with USB devices inserted, and not get any Kernal-PnP warnings

Hope this helps somebody else

mfG
Dave

More replies
Relevance 88.56%

*** Problem has reappeared, so this is NOT a solution ****
It worked for 5 reboots, so strange it reappeared

Been searching for days to find a solution for this problem (including fresh installs of Windows 10 etc), and today accidentally found it ... for my Asus Maximus V111 Formula at least, but it may also work on other motherboards

In BIOS, ensure that the XHCI Hand-Off is set to ENABLED (default is disabled)

I changed this, and now I can boot the system with USB devices inserted, and not get any Kernal-PnP warnings

Hope this helps somebody else

mfG
Dave

Answer:The driver \Driver\WudfRd failed to load for the device (NB. FOR USB)

See if this helps
> Type Services into the search box. Run the Services desktop app
> (You may need to click the column header to sort services by their name )
> Right click on Windows Driver Foundation.
> Select Properties and set Startup Type to Automatic
> Reboot

11 more replies
Relevance 88.56%

At Windows 10 startup this Warning appears in my Event Log as Event ID: 219.

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{a1c931b2-3b00-11e5-9c14-806e6f6e6963}#0000000008100000.

I know why this happens. The device in the message is an internal SATA AHCI hard drive. All AHCI drives, even internal ones, are considered removal or hot swapable. It even causes the safely remove icon to appear sort of like it was a USB drive. It happened on Windows 8.x. Don't remember if it happened on Windows 7. I can't make any changes in my BIOS to make it not hot swapable as there is no option for this drive.

The fix to get rid of the message in W8 was to modify the Service 'Windows Driver Foundation - User-mode Driver Framework' Changing the Startup type from Manual to Automatic fixed the problem. However, on Windows 10 this method does not work.

I can't disable the Service as it's needed for other devices. Just wondering if anyone found a nice clean way to get rid of the warning message like in W8?

Answer:The driver \Driver\WudfRd failed to load for the device .......

I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.

4 more replies
Relevance 88.56%

Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`

Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)

This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:

I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.

My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):

Anyone else run across this condition or have a known solution using the latest driver?

Thanks,

aardvark

More replies
Relevance 84.87%

i have an aspire one. AO725 is the model. my wireless internet driver went wacky when i updated to widows 8.1 and i re-installed the driver. a day later it is not connecting to the internet again. please help.

Answer:my wireless internet driver failed when I updated ...

go to device manager, right click on your wireless adapter and choose uninstall, then reboot on next boot install the latest drivers from the acer website:http://us.acer.com/ac/en/US/content/drivers/4729;-;Aspire%20V5-122P select windows 8.1 as operating system

1 more replies
Relevance 84.87%

I tried to install the HP Consumer Desktop Bios Update (Rom Family 821D) thee times without success.Also tried tointall the Intel HD graphics driver for Windows 10v1607 wihtout success.  Why do these updates fail to install. The computer is brand new. The outsourced support could not figure out the problem and wanted to charge me to fix it.  Nonesense. What to do?

More replies
Relevance 83.64%

Windows 8.1 Pro x64 - please find the complete system log warning details below and a (related or not?) disk controller error below.  Motherboard is an ASRock B75 Pro 3 with an Intel B75 Chipset.
I keep getting these warnings.  I get them for all my Windows Portable Devices (disk drives) on boot up.  Here are my disks:
Disk 0 on internal SATA 3 connector off an
ASMedia ASM1061 chip on motherboard (internal drive, but enumerated as removable) - Seagate ST100DM003-1CH162 D: data drive
Disk 1 on internal SATA 3 connector off the B75 chipset on motherboard (internal drive, not enumerated as removable - gives no warnings or errors - Seagate ST100DM003-1CH162 C: system drive (has Windows 8.1 OS on it)
Disk (2 or 3 depends on order of USB connection) on external USB 2.0 connector off back I/O panel of motherboard - Kingston DT 101 II USB device F: backup thumb drive
Disk (2 or 3 - depends on order of USB connection) on external USB 3.0 connector off back I/O panel of motherboard - Seagate BlackArmor DAS35 USB device G: backup external hard drive
There are no symptoms other than another (probably unrelated) disk controller error (shown below).  The controller error is on either drive 2 or 3, but never 0 or 1, so it is one of the external back up drives (the thumb drive or the BlackArmor drive).
 Note that on boot up I get the warning for disk 0 above whether or not the external drives are connected so the disk controller error may be unrel... Read more

More replies
Relevance 83.64%

Hello,
My integrated speakers and audio port do not seem to be working. It happened after I was playing around with bluetooth trying to get that to work. Now only bluetooth is able to connect. 
So far I have tried:
System restore
Deleting and redownloading audio drivers
Adding legacy hardware for Realtek
ePSA test was able to hear the tones
The audio logo has a red X through it and only the bluetooth headphones drivers appear in device manager. Any ideas what might be the issue and how to solve them? 

More replies
Relevance 82.82%

I have this problem:
Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)

The driver could not be loaded because a previous version of the driver is still in memory.

and now I am not able to connect any usb device to my laptop making it virtually impossible to use windows 10.
How do I downgrade to windows 7,have enough of the beta testing.
I even have a purchased version of windows 10 pro which I really regret buying, worst investment ever.

More replies
Relevance 81.59%

 Spoiler (Highlight to read)Spoiler (Highlight to read)       

More replies
Relevance 81.18%

Hello everyone. Hope you are all doing good today and able to beat the heat on this very hot day. I have this really old laptop HP Pavillion dv6000. Originally it came with Windows Vista installed back when Windows Vista was first released but eventually I upgraded the laptop to Windows 7. Everything was fine and working until recently where the laptop has no sound. I try to install the sound driver from the HP website and it says "driver installation failed: could not find the device for this driver." No matter what I do I cannot get sound on this laptop. If I go to YouTube and watch a video the video plays just fine but with no sound. When I click on the sound icon next to the time on the desktop bar a window pops up that says "troubleshooting has completed" Problems found: "Hardware changes might not have been detected." I am not sure what is up with this or how to fix it but any help is appreciated thanks.

Answer:It says "driver installation failed could not find the device for this driver"

A Vista laptop likely doesn't have Win7 drivers written...try re-installing the originals from the Driver CD and reboot...Plus it's likely you are trying nVidia or AMD drivers gettin it to work which is a no-no on a laptop....

6 more replies
Relevance 78.72%

I just bought the Nikon Coolpix L22 digital camera. I installed their software and when I connect the camera via USB port I receive error "MTP USB Device failed Nikon DSC Coolpix l22-PTP.
I am running Windows 7, 64 bit, 8GB RAM, AMD Athlon Dual-Core processor 7550, 2.50 GHz

Answer:Device Driver failed

Hi,Try the Troubleshoot compatibility, and see does it works with XP Because some programs(drivers) doesn't work with windows 7 and worked with windows xp...You have the user manual for that model hereHope this help Max

4 more replies
Relevance 78.72%

I was tried to update Bios to 1.12 but not successed..It always came out this message " Driver Loading Failed. The Utility cannot proceed."..I tried to update under safe mode, still not work..I tried to use Winflash, it came out "Cannot open new BIOS file"..There's only one method that I didn't try is that burn a ISO CD and connect to External CDROM.. but I don't have External CDROM..The reason that I update Bios is that I want to install Toolbox; otherwise, I won't take this risk..For futhermore information click following link..http://forums.lenovo.com/t5/ThinkVantage-Technologies/This-version-of-Lenovo-ThinkVantage-Toolboox-i...

Answer:X120e update BIOS failed "Driver Loading Failed. The Utility cannot proceed"

Sounds like something wonky with your Windows install. I'd avoid doing a BIOS update through such an install.

4 more replies
Relevance 78.31%

I just placed a ssd from another laptop in the new laptop today and both the touchpad and usb logitech m310 mouse were working fine.After using windows update to update suggested drivers I lost my mouse and notice an error in the device manager.The error was on Intel USB 3.0 extensible host controller. I've removed and reinstalled the driver several times. The existing sdd has synaptic drivers for the touchpad and after doing the updates I noticed that Elan is now driving the touchpad. Any help would be greatly appreciated. Thanks 

More replies
Relevance 78.31%

I've spent 3 hours trying to find the drivers for this. Looked online, any gurus help me please? Ran ThinkVantage updates, Irks me it doesn't find it automatically.  I have a t520. if it's an update for the AMT, i cna't find it on the drivers pages, and lenovo removed direct links from URL's, so I don't know where to go from here.

Answer:Can't find driver. PCI Simple Communicatoins Driver and PCI Serial Port Driver in device manager.

http://support.lenovo.com/en_US/downloads/default.page?

3 more replies
Relevance 77.9%

Operating System
MS Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i5 750 @ 2.67GHz 37 °C
Lynnfield 45nm Technology
RAM
4.00 GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
Motherboard
MICRO-STAR INTERNATIONAL CO.,LTD P55-GD65 (MS-7583) (CPU 1) 35 °C
Graphics
SyncMaster ([email protected])
ATI Radeon HD 4770 (XFX Pine Group) 51 °C
Hard Drives
932GB Western Digital WDC WD1001FALS-00J7B1 ATA Device (SATA) 37 °C
Optical Drives
HL-DT-ST DVDRAM GH22NS50 ATA Device
Audio
Realtek High Definition Audio
Operating System
MS Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i5 750 @ 2.67GHz 37 °C
Lynnfield 45nm Technology
RAM
4.00 GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
Motherboard
MICRO-STAR INTERNATIONAL CO.,LTD P55-GD65 (MS-7583) (CPU 1) 35 °C
Graphics
SyncMaster ([email protected])
ATI Radeon HD 4770 (XFX Pine Group) 51 °C
Hard Drives
932GB Western Digital WDC WD1001FALS-00J7B1 ATA Device (SATA) 37 °C
Optical Drives
HL-DT-ST DVDRAM GH22NS50 ATA Device
Audio
Realtek High Definition Audio

Have tried to resolve issue with Canon powershot S50 connected by USB no longer functioning with W7.
On occasions the only response is the pop up message driver device failed to install.
The camer is recognised under " Device and Printers" When I trouble shoot response is to visit manufacturers site and download driver - not required under Windows compatibility listing.
Have gone to Device Manager and removed all reference to Canon Camera under Portable devices but get same re... Read more

Answer:W7 + device driver failed to install

16 more replies
Relevance 77.9%

I have tried to fix this issue. I have Mobile Intel 965 Express Chip Set Family showing the Yield sign. I keep getting the Device Driver Failed to start and the picture is distorted and make the computer very slow. Is there a fix?

Thanks

More replies
Relevance 77.49%

Since updating from Win 8 Pro to Win 8.1 Pro the umts-modem-driver isn't working properly.
In the device manager he is marked with the yellow exclamation mark.

Where can I get a driver? In the download area I still only find x86 drivers for win8.1

Answer:Windows 8.1: 3G UMTS-Modem driver shows problems in device manager

You did not post any info about your notebook model but i presume that such drivers are not released if you did not find any on the Toshiba driver page.
But I think you should try the Win 8 driver since the 8.1 version isn?t very different as the Win 8

10 more replies
Relevance 77.49%

hi, i downloaded thru the vaio update the latest realtek driver version 6.0.1.6526. Now i have no sound whatsoever and neither sony or realtek have replied to my emails. the speaker icon in the bottom rh corner has am=n x in it like its muted but when i hover over it it says no audio output device is installed. i have been to the sony support site and tried re-updating version 6.0.1.6526 but it still has no sound... help! running win 7 home prem 64bit on a sony vaio c series vpccb15fg.
I have uninsalled and reinstalled driver to no avail

Answer:updated realtek driver thru vaio update and now i have no sound

Did you try a "rollback" to the previous version (that apparently worked)? Go to the Device Manager, display the sound and in the Driver section you can "rollback" the driver to the previously installed version. Or if that does not work, use the System Restore and restore the PC back to a date when the old driver was installed and it worked.

9 more replies
Relevance 77.08%

OS: Windows Vista Buisness Edition
Device: Zen Vision M

Hi guys, I've had this Zen for almost a year now, it docks jst fine with my win 2000 rig, however it fails to work with my vista laptop.

I plug in the Zen, the "installing device driver" icon comes up in the sys tray, after a few moments it says "driver install failed."

It recognizes it as a MTP device when it is loading.

The zen screen shows it as "docked."

Help!!
Gimpster
 

More replies
Relevance 77.08%

Windows says device driver installation failed for hp laserjet 1012. This despite printer working correctly. Every time on reboot I get this message. How do I stop windows from trying to install driver for a working device???

Answer:Windows says device driver installation failed

You have to reinstall your printer drivers or you're probably going to continue to get the error. If you are unsure how to go about updating your device drivers for the printer, I would suggest you start here:

What are device drivers? A quick device driver installation guide.

good luck.

2 more replies
Relevance 77.08%

Periodically, I get a message which states:C:\Progra~1\Symantec\S32EVNT1.DLLAn installable Virtual Device Driver failed Dll initialisation. Choose close to terminate the application.I think this happens when my screen saver starts.i have recently uninstalled Norton antivirus as I was getting problems with my PC looping on shut down, I believe this was due to "common client" updates not installing.Any ideas please?

More replies
Relevance 77.08%

Hi,

On a fresh clean Windows 8 image, my software driver (signed) installs fine and shows up properly in the Device Manager. However once i uninstall it , subsequent reinstalls show up as 'Unknown Device' in the Device Manager.

From the device details, I find that it refers to /looks for the .inf file in c:\windows\inf folder but the file itself is missing from the location. The FileRepository has all the required files. But trying to update from there also fails.

Could anyone help me with troubleshooting this problem. What could be going wrong.

Thx,
Gita

Answer:Device manager shows "Unknown Device" on reinstallation of driver

Please fill your system specs to get help efficiently.
What is your computer make/model?

1 more replies
Relevance 76.67%

Photoshop crashes the video driver many times when opening and everytime when I have second monitor attatched.I see that there is a new driver from intel version numver: 15.33.14.3412Has anyone successfully installed this and does it work well?I'm asking because it's not available through Lenovo yet. Here is the link for the driver: https://downloadcenter.intel.com/Detail_Desc.aspx?ProductID=3719&DwnldID=23639&lang=eng&iid=dc_rss

Answer:Yoga 2 Pro Video Driver crashing with photoshop. Has anyone updated driver to Version: 15.33.14.3412

I doubt lenovo will ever update the video driver. Lenovo really suck with keeping drivers up-to-date.

4 more replies
Relevance 76.26%

"The installation failed because a function driver was not specified for this device instance"
I received this message while installing a USB driver. I have an 80GB External USB 2.0 hard drive attached that was working great a few days ago. I logged on one day to find this device "unrecognized". When I checked the device manager, it said that the driver was missing (?!). I searched for the driver on the MS website, and the device manager seemed to find a suitable one, but upon install I got the message above.

I found the old driver on my system – which seemed odd to me, deleted it, tried to reinstall and received the same message.

I understand that USB 2.0 is backwards compatible, plus it was working previously, so it seems strange that it suddenly died.

Any help is greatly appreciated.

BOB
 

More replies
Relevance 76.26%

For the past couple of days i have been having a problem where my computer just shuts down on its own and then turns back on again. It mostly happens when im launching or playing a game but a couple of times i was just on the desktop and it restarted. I have checked the event logs and it keeps saying this:

The driver \Driver\WudfRd failed to load for the device SWD\SensorsAndLocationEnum\LPSensorSWDevice.

I have searched all over the internet for the past couple of days and have found multiple answers (all of which didn't work). Some say its the psu and others say its the gpu. I personally think it was the windows update that i did three days ago because that was the day it started but i have yet to see anything online about a windows update causing this. I have already updated the graphics drivers and chipset drivers but it didn't change anything. Can someone just tell me whats going on because is just built this pc about 6 months ago and nothing like this has ever happened.
Specs:
MSI Z87 GD65 Gaming Motherboard
Intel Core i7 4770K
Nvidia Geforce GTX 780TI
16GB DDR3 RAM 1333MHZ
680W PSU (Not sure what the brand is. I think it might be kentek or something)

More replies
Relevance 76.26%

Hi,
I have recently bought Samsung galaxy S5 device. When I tried to connect it to my computer I nothing happend (what should have happen is that it will pop up the "What do you want to do? Go to folder/..." menu).
So I tried another usb socket. still the same problem. I have Ubunto install as a sperate OS on my computer, and there everything is working fine - so the problem is not in the cable/USB on my computer.

I went to Device manager and under "Portable devices" I see the "SAMSUNG Mobile MTP Device" icon with a yellow mark. I open it and I see "this device is not working properly because windows cannot load the drivers required for this device. (code 31)". I also have "SAMSUNG Mobile USB Modem" under modem in device manager (but it says that this device is working properly).
I tried to remove the "SAMSUNG Mobile MTP Device" and double click it and choose "update driver"->"search online". It found the driver but was unable to install it (got a "access deined" screen).

**This is not a problem of registry "UpperFilter"/"LowerFilter" problem. I saw it online while I was google a soultion and this is not my case***

I also tried to install the driver by installing "samsung KIES". It didn't help.

When I connect the decive and go to Windows Update -> a new update for samsung mobile is showing but when I choose it and click update it fails e... Read more

Answer:samsung mobile mtp device failed to load driver

I don't know the answer to this, but I see you've had many views and no replies.
I'm sure that you've googled this and it isn't to patronize you, but here are a couple things I've found that MAY help.

Possible Solution 1:
"Access Denied" Message During USB Device Installation - National Instruments

Possible Solution 2:
When installing the driver(s),





Quote:
Even though you allowed admin in your user profle and allowed it to run in admin, this does not give you full control for all users. Do the following below. Then, Logoff, login with the new admin owner. Only the owner of this pc has full user rights.
Its worth a shot

How to enable the hiding admin account for login
1- In the run type: secpol.msc
2- Find and click on, Local Policies,security options,
3- Over to the Right in the policy setting, (accounts: Administrators account status) Enable
Close tht and got to
1- Run, lusrmgr.msc
2- Create a new user, or use Administrater, Built-in account for administering.
3- Right click, Properties
4- Uncheck, Account is disabled
If you chose you can change the name and add a password, now when you log off you can have the options to log in as admin, owner of this pc and have controll over all users. its better to have th admin login the the below

Or this but sometimes this method has failed and sometimes not

net user administrator /active:yes ,you have admin until reboot, or you go no.

9 more replies
Relevance 75.44%

Hi, guys.

When I want to install certain programs, there is a set of error messages that makes the installation fail. They're as follows:

"c:\PROGRA~1\Symantec\S32EVNT1.DLL. An installable Virtual Device Driver failed Dll initialization. Choose 'Close' to terminate the application."

If I push "ignore" then this message appears:

"c:\Windows\system32\autoexec.nt. The system file is not suitable for running ms-dos and microsoft windows applications. Choose 'close' to terminate the application."

I have a feeling that this is caused by a Norton antivirus program I installed couple years ago that I had a heck of a time removing. Could there be a chance that some parts of the program is still lingering to cause this?

I've been having this problem for the longest times and threw away a bunch of software because I simply couldn't install them. It's soooo frustrating. Please help!
 

Answer:Error Message: virtual device driver failed Dll initialization

It's a fairly common problem with an easy fix.

Download and run the file in this post from Elvandil:

http://forums.techguy.org/2178768-post2.html

It will fix the second error -- I'm not sure about the first.
 

3 more replies
Relevance 74.62%

I get the following Warning, Event ID 219 in the System Log on each boot:


The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter\8&16310cd5&1&01.
The Event Log Online Help doesn't appear to be working anymore.
I was able to resolve these types of errors with the assistance of the Event Log Online Help in the past. Does anyone know the procedure to troubleshoot this error so it can be resolved?
Thank you for your assistance.
Regards

More replies
Relevance 74.62%

I had Norton Internet Security 2006 on my PC, uninstalled it and also ran the Norton Removal Utility (Ver.2008.0.1.19)

When I try to install a program, (Presto PageManager 7.15), at the end of the install I got 2 error messages:
The 1st is "AddPrinter Error: 1796".

The 2nd is related to Symantec: (16 bit Windows Subsystem)

?C:\progra~1\Symantec\S32EVNT1.DLL. An installable Virtual Device Driver Failed DLL initialization. Choose 'Close' to terminate the application.?

I?ve researched the problem extensively. It relates to registry key Virtual Device Driver VDD. I tried to delete the key, delete the data value, etc. Nothing helps. When I remove Page Manager & try to reinstall I still get Error messages telling me the Virtual Device Driver is not setup properly or it?s data is wrong.

Below is my HJT log file.
Please let me know what I need to do.
 

Answer:C:\progra~1\Symantec\S32EVNT1.DLL. An installable Virtual Device Driver Failed DLL in

Re: C:\progra~1\Symantec\S32EVNT1.DLL. An installable Virtual Device Driver Failed DL

Try running SymNRT, the Norton Removal Tool from Symantec. It works better than any of the 3rd party Norton removers. It may be too late, but it might still be able to clean up any remnants. Get it here: http://www.majorgeeks.com/Norton_Removal_Tool_SymNRT_d4749.html You should probably also run a registry cleaner. CCleaner has proven itself both safe and effective; run both the disk cleaner and the registry cleaner using default settings and be sure to save the reg when prompted by CCleaner (just in case ). You'll be required to reboot after SymNRT (if it runs), and you should probably reboot after CCleaner. Then retry your installation. Download CCleaner from here: http://www.majorgeeks.com/CCleaner_Slim_No_Toolbar_d4191.html

....and Welcome to Major Geeks! :major
 

2 more replies
Relevance 74.62%

I am using a Satellite L300 series laptop with a TSSTcorp CDDCDW TS-L633A CD/DVD drive, however the drive has presently stopped working, saying that:

"Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)"

I have tried uninstalling the drive and restarting the computer however when the laptop attempts to reinstall the driver I get an error message saying:

"Device driver software was not successfully installed"

Any ideas for how to get the disk drive up and running again?

Answer:Satellite L300: TSSTcorp CDDCDW TS-L633A Device Driver Failed

Hi

I think this can be solved very easily.
There are some threads which provide an solution;

Usually you need to delete this device in device manager.
Then you have to go to registry and have to remove the upper and lower filters from registry key.
Here you can get more details:
http://support.microsoft.com/kb/270008/en-us

After that reboot the unit.

4 more replies
Relevance 74.21%

I have been doing a periodic update of the system drivers on the laptop.  Last time I can recall doing this was nearly 2 years ago.  And this time I encountered problems. This topic is a follow-up to my query on this thread, regarding safe mode start/restoring after a failed driver update:http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/booting-safe-mode-on-hp-g6-2002au/m-p/5690028/... And as i reported there I begam doing a one by one update to locate what caused the original problem with the bulk update.  After 7 one-by-one driver updates, I found the (or, at least) one causing the problem.  In the following image, the 2 PCI-to-USB host drivers caused a windows failure message after the update.  There are 6 USB-related drivers in this extremely old/aged list and clearly they relate to the number of installed hardware items on the laptop.  See this screen shot of the Device Manager list:  Of the 6 USB drivers to be updated, I picked these 2 items to update first because 1) they looked to be the oldest (the replacements were dated in 2010), and 2) as I understand the technology, these bits connect the processor bus to the actual host and hub chips. I chose only these 2 PCI- drivers for update (unticked the selection boxes for all the others in the booster list), and proceeded.  When the install was completed a windows message box reported a windows failure for one of the devices (which one, not stated or ev... Read more

Answer:Failed USB driver update

@Davidk10 There is no HP updates, the prograns you are using is not support by HP. 

5 more replies
Relevance 74.21%

Receive error of no audio driver is installed, yet conextant driver is working properly. Have installed RealTec driver, but does not show in Device Manager. Using Windows 10 Preview build.

More replies
Relevance 74.21%

I am tying to sync my Samsung Galaxy J7Sky Pro phone with my computer using Samsung Smart Switch Program.
When I start the Smart Switch Program and plug in the USB cable from the phone to the computer USB port, the device driver for the phone does not install properly or recognize the phone, as depicted by a yellow exclaimation point for the Galaxy J7 Sky Pro
device driver and AMDA00 interface under system devices.
I tried reinstalling the Samsung phone device driver but still get the above exclaimation for these drivers.
I then shut down and restarted the Samsung phone and the drivers reinstalled properly and the Smart Switch Program worked. 

My issue is that the next time I restarted my computer, I get the same device driver errors.
Is there some way to prevent having to restart and reinstall the device drivers each time I want to sync my phone using the Smart Switch program? 
Same issue used to happen with my Samsung Galaxy SIII phone, before I upgraded to the Samsung Galaxy J7 Sky Pro.
It is a real pain in the neck and time waster.

More replies
Relevance 74.21%

My equipment:    ThinkPad T400, Model 7417CTO, 3GB Ram    OS: Win 7, Ultimate    Docking Station: Model 2504 (manufacture Date 06/07)    My problem:        I have had several instances in the past week, (since 8/20/2010) where my Mouse Wheel and Left Mouse Key quit working.    Other symptoms include Left Mouse Key either stops working or acts erractic, such as spawning another instance of FireFox when clicked in a FireFox window.    The Power/Sleep-Key button on the Docking station no longer works to go into the Sleep mode.    I can now only put it in the Sleep mode, when the T400 is in the Dock, by using the Win 7 Menu selection for Sleep.    The button on the Docking station still works to Start up and to bring the T400 out of Sleep.    All these problems occur while the T400 is in the Dock Station.    I can only get these symptoms to stop by Restarting the T400.    Recent Changes:    On 8/20/2010 I updated several drivers, including the new BIOS dated 9 Aug 2010, Ver 3.19/3.17.    I updated the Hotkey driver V 3.10.000, as demanded by the update for the UltraNav driver.    I updated the UltraNav driver, V 15.0.24.0, dated 15 Jul 2010.    Can I go back to the previous UltraNav driver?    Any suggestions of Ho... Read more

Answer:Updated T400 UltraNav driver (w/ Hotkey update) and Power/Sleep-Key on Dock problem

Also look here. I didn't try it yet, but it is suggested to switch to the stock synaptics driver from their website... However Lenovo should issue a bug release of their UltraNav software as well.... --jan





--- Lenovo Thinkpad t440p (20AN-CT01WW) + SAMSUNG MZ7TD512HAGM-000L1 SSD + 16G SDRAM + 14.0FHD 1920x1080 ---

1 more replies
Relevance 73.8%

Hello, currently I have an up to date driver installed for my display. My laptop is a Toshiba and I've been having issues with youtube videos making crackling noises. I'm not sure if that is related to my display driver, but after checking Toshiba's website, there is an older display version : 9.17.10.2843 from 2012-09-20. I have version : 10.18.10.4358 from 12/21/2015. Should I downgrade my driver to the one listed on the website?
 

Answer:Should I use the driver provided by manufacture or most updated driver?

TheBlue262 said:


Hello, currently I have an up to date driver installed for my display. My laptop is a Toshiba and I've been having issues with youtube videos making crackling noises. I'm not sure if that is related to my display driver, but after checking Toshiba's website, there is an older display version : 9.17.10.2843 from 2012-09-20. I have version : 10.18.10.4358 from 12/21/2015. Should I downgrade my driver to the one listed on the website?Click to expand...

I think there must be a newer driver on toshiba website. Give it another check. It just doesn't make sense that there are such old drivers there, especially since you yourself have a newer one
 

12 more replies
Relevance 73.8%

Hello i keep getting the same symptoms as everything(black screen followed by the igfx message) and frequent bsod. I have already ran everything in the virus, malware department, cleaned my system and even tried a system restore. I have updated all drivers(I have the intel chipset family graphics driver)

Heres some specs, if you need something else, let me know.

OS Name Microsoft? Windows Vista™ Home Premium
Version 6.0.6002 Service Pack 2 Build 6002
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name TAMMY-PC
System Manufacturer Hewlett-Packard
System Model HP Pavilion dv4 Notebook PC
System Type x64-based PC
Processor Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz, 2100 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Hewlett-Packard F.42, 5/14/2009
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.0.6002.18005"
User Name Tammy-PC\Tammy
Time Zone Central Daylight Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.90 GB
Available Physical Memory 2.13 GB
Total Virtual Memory 7.98 GB
Available Virtual Memory 5.96 GB
Page File Space 4.20 GB
Page File C:\pagefile.sys

The last time i got the blue screen of death and rebooted, it showed me this error message from windows.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 103... Read more

Answer:Device driver igfx has failed or recovered.(And i dont play online games)

Hello and welcome to the forum and I am sorry you are having system problems, start with this and someone who is an expert in BSOD will get back to you.


BSOD - Debugging a BSOD in Vista

BSOD with netio.sys or ndis.sys - Fix

1 more replies
Relevance 73.8%

According to my service tag, I should have a Toshiba 512 NVMe SSD drive.  However, it is a Samsung PM961.  Where can I get the drivers as these are non-existent on Samsung's website?

Answer:Laptop shipped with Samsung PM961 512 GB drive, where is the driver? Service tag shows I should have a Toshiba and it isn't on the driver download page.

All of Samsungs SSDs that end with a "1" are OEM units - drivers from the system vendor.  Models that end on "0" are Samsung supported retail drives.
They're listed here as well.
www.touslesdrivers.com/index.php

1 more replies
Relevance 73.8%

Hiya, just a while I ago I tried to install the NVidia driver update in my windows update but it says it failed after trying to install. Was wondering could this corrupt my video card driver or registery or can anything be done to make this error like it never happened before? Currently I'm using a GTX 460 with NVidia driver version 311.06 , many thanks.

Answer:nvidia driver update failed in windows update

go to windows update, click on the "View update history" link, find the driver that failed to install, double click on it and post the error code in this thread.

9 more replies
Relevance 73.39%

System: T430u I was having a problem detecting a new bluetooth speaker so, Using Lenovo Solution Center, I chose to update my bluetooth driver.  Beforef the update, I had run some bluetooth software by double-clicking on the bluetooth icon in my system tray and didn't shut it down, so it was running during the update.  I assumed that's why the update failed (couldn't shut down some service whose name I don't remember).  After the installation failure there was an option to manually install the driver by clicking on some link (still within Lenovo Solution Center).  So I clicked and it seemed to install. After reboot, there's no bluetooth icon in the system tray and when I check the driver, version it's an old version.  The Installation history in LSC says:    "Broadcom Bluetooth Device Software BCM20702 -8[32,64]/8.1 [64]  version 12.0.0.5400 Did not install"But now doesn't give me the option of installing it and I can't find it at the Lenovo support pages for my laptop. Can someone give me some advice on what to try next? 

Answer:Bluetooth driver update failed

Restore point in Windows.  Note for future:  Lenovo Update does NOT create restore points.  You'll need one of your own to roll back in case you don't like what LU does for you.

1 more replies
Relevance 73.39%

So I've been trying to update my graphics card. Before I ever got the notification for the update and tried to install it, I could play minecraft, and star craft, and watch Netflix video. When I did install, and was given the failed due to I/O error box, I couldn't play any games or watch any Netflix. Don't know what to do to fix this. Since, I've gone to my manufacturers website and re-installed my driver, but I think the real problem is seeing how I cant connect it. It always says it failed due to the I/O error, so I cant connect it to the video card or something.
My computer is a Toshiba. other info:
Model: Satellite L875DProcessor: AMD A6-4400M APU with Radeon(TM) HD Graphics 2.70 GHzPlenty of RAM (only 5 month old computer)
In Device Manager under Display Adapters It says Microsoft Basic Display Adapter. I just need to know how to change it. I've gone in through device manager, pressed update driver, chose to do it manually and choose a signed driver. When I choose My AMD Radeon Drive and it attempts to install, it always says it failed due to an I/O error. This has been going on for a week or so, and I thought I could fix it, but nothing works.

If you need anymore info, just ask, I just really need help im going to go nuts!

Answer:Graphics Driver Update Failed, Help!

uninstall the video drivers from device manager

do your windows updates for at least your chipsets and graphics driver

download the drivers here Official Toshiba Support | Toshiba

your full model number is required there are 5 more digits after the L875D >> L875D-XXXXX

Scroll down the huge list of drivers, and find your chipset if possible, but at least your graphics adapter..

6 more replies
Relevance 73.39%

Hi,

About last week I update my graphic card driver (nvidia geforce go 7150m/630m) from ver 7.15.11.5665 to 7.15.11.7991 using updating function in Device Management. The update when smoothly and I thought at first that it's successfull since I did not receive any error messag and in Device management list the new ver. as 7.15.11.7991. However, after that I got some conflicts in driver and it somehow affects my cdrom drive as it's now no longer start when turn on the laptop unless restart immediately.

I went to the regedit and see in the installer folder of nvidia, the install regitry listed as "failure" and the version is still listed as the old one (7.15.11.5665). Is there any way to correct this?

BTW, my OS is window vista home premium 32-bit.

Answer:nvidia driver update failed

Welcome
If you have the new driver and are having problems, go back to device manager and roll back to the old driver. What you are experiencing is a common problem. Many here feel it is best not to upadate unless you are having problems.

Edit: Better to roll back with a system restore.
System Restore - How to

14 more replies
Relevance 73.39%

I have regualrly run a System Update for my computer via Lenovo Companion and I've managed to have all updates successfully completed - all except for one. Lately, I have runs of Updates where I encounter an update for Synaptic UltraNav Driver, run it, but comes up as being unable to download and install - in spite of a successful initial download. Since its encounter a couple of weeks ago, I have been unsuccessful in fully downloading and installing this specific Driver for my computer. Is there any indication of issues for this Drive? And what should I do to resolve it? Also, if the Driver can't be properly updated, what is its purpose for my system? Any form of help concerning this Driver update issue would be appreciated.

More replies
Relevance 73.39%

I just downloaded the Vista driver for my Nvidia 8500GT , and during install, Nvidia shows it as a "Windows 7 32-bit Driver"...

Did this happen now or was I sleeping all this time?

Answer:Downloading Vista's Nvidia Driver shows up as W7 Driver!

the beta 181.22 for x64 does the same.

3 more replies
Relevance 72.57%

I hope this is the right place to post.

I have been having trouble with Mass Effect Andromeda and minor freezing during gameplay. Nothing really major, just annoying pauses in the flow of the graphics and all even in low despite using 2 AMD 390X cards, a Ryzen 7 1700X, and a MSI gaming pro carbon motherboard.

I thought I could fix it with a driver update, but not only did the update fail to go through, now anything that loads causes my computer to freeze. It froze for 10 minutes until all of my software finished booting during the startup, and another 10 minutes while trying to login to Origin.

I have no idea what is going on, and I don't know where to begin to fix it. Please don't ask for a DXdiag because it's impossible to operate this thing right now. Just know I'm running on the 17.4.4 ReLive driver, and for some reason, my computer failed to sucessfully install the 17.7.2 update.

This problem happened before when I tried to install the 17.6.6 version as well, but I was able to fix it by rolling back the driver. I can't now, so now I don't know what to do. Any help ASAP would be great.
 

Answer:Serious freezing after failed graphics driver update.

Status Update: I hit the reset button after my computer froze while I was uninstalling my drivers completely and, somehow, this not only fixed the problem so far, but it also finished the installation of the latest update as well. The only problem so far is when I click on the gaming icon in the AMD Radeon Settings and the program completely stops working. I can live with that since I don't tinker with them that much, but I would still really like to know what the F*#%tapuss is going on with my computer.
 

1 more replies
Relevance 72.57%

Today I ran the Windows 10 upgrade for the BluRay Player software and it proceeded to uninstall but failed during the installation phase with the message below. This make no sense to me as all the hardware in the Notebook PC is factory original. Does anyone know how this can be fixed?
Patch Project - InstallShield Wizard
product type of source build is not target build

More replies
Relevance 72.57%

Product Name: HP ENVY DESKTOP 750 124
Operating System: Microsoft Windows 10 (64-bit)

HP Support Assistiant Action Log reported an update was needed for th Intel HD Graphics Driver.* Upon exectucting the update a message box indicates "A seperate installer has lauched. You may need to perform necessary actions to complete the installation."* At about the same time an Install Shield Wizard box appears. When I comply with all insturctions an Overwrite Protection box appears.* It states the files is already installed.* Upon further research I find the Intel HD Graphics Driver is dated 2017 where as the HP Intel driver is dated 2016.* To install the latested Intel HD Graphics Driver I am cautioned that I would be installing a genertic Intel HD Graphics Drives which may cause my HP to lose driver functionality.
*
Being stuck inbetween a rock and a hard place what should I do?

More replies
Relevance 72.57%

Hi all.

I have an ASUS M-11 tower and I recently had it's Intel HD Graphics (4400) konk out on me. The HDMI output stopped working rendering my tower useless for watching HD movies on.

I tried using an Intel driver updating app but apparently it didn't work. After a reboot I get a solid red screen, with no text on it, and no way to interact with it. I can't login or do anything. The only thing that happens is the screen changes from red to blue if I tap ESC, that is it.

So I accessed the recovery options by pressing F9 at bootup. I chose the Reset PC option. It went thru the process, but after completing and its auto reboot, I just get a blank black screen now with no way to interact. No logos, no updating icons nothing to indicate more stuff is going on like setting up files. If I reboot from this screen, it just reboots the PC and loops back to the same blank black screen.

I tried leaving it for over 20 minutes on the black screen thinking maybe it's just doing stuff in the background, but nothing comes of it.

I am not sure what to do from here. I don't have a recovery USB or disc.

Anyone have another suggestion ?

More replies
Relevance 72.57%

Nvidia graphic card driver updated and now can't see screen. How do I revert back to prior vesion; safe mode or restore point but screen  is blank. 

Answer:Windows 8 update for video driver failed

Where did you get that driver from?
 
Safe mode shouldn't be affected by nVidia driver.
It doesn't load in safe mode. Windows loads its own generic driver instead.

1 more replies
Relevance 72.57%

Tonight I decided to try out Win 7 Ultimate RTM (32bit) on my Lenovo T43. I have had pretty much a flawless install save for one glitch that came while installing drivers from Windows Update.

I got a failure to install message on the Intel Corporation - Display - Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family that the Updater was trying to install.

Here are the details:






Quote:
Intel Corporation - Display - Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family
Installation date: ‎9/‎10/‎2009 10:13 PM
Installation status: Failed
Error details: Code 800F022B
Update type: Recommended
Intel Corporation Display software update released in January, 2007
More information:
Winqual Help
Help and Support:
Select a Product Solution Center


Is there any way I can go back and redownload and try to reinstall this again. Right now when I click on the Update button it says there are no more drivers even though this one failed to install.

Any help would be greatly appreciated.

Answer:Trouble with failed driver on Windows Update

Hi GhostRaider, welcome to the forums.

You might want to try going Here and try running Intel's 'Driver Update Utility' and see if that gets a better result than Windows Update.


   Note
I had the same issue when first install Windows 7 with my Intel 945 Express Chipset, the update would fail every single time

Unfortunately, Intel have not yet released a Windows 7 (32/64) driver for the 910GML or 915GM so Vista drivers in compatability mode may be your best bet of the 'Utility' does not work.

Hope this helps


OS

2 more replies
Relevance 71.75%

I hope you can help me fix my dad's computer!! This site has helped me fix my laptop. I really appreciate you guys!!

On my dad's computer : I tried to update BIOS graphics driver per instructions for new larger monitor (which has not even been hooked up yet).

I went to the Dell website and entered the service code HPLW3G1 to find the graphics driver to update. I recall nvidia but now looking at the list that they have on that website, I am not sure what I downloaded. I saved it to desktop and then clicked to install it. I then got a small popup that said I must close all other applications. When I clicked ok on that little window - (so I could close the other applications that were open), it started installing anyway! I exited the install window (wrong thing to do? It said do not turn off power in red letters), closed applications. Then I restarted, because it didn't want to open google chrome.
NOW when I turn it on, the blue light on the on button lights up, sounds like the fan is running, but the monitor does not even respond, it goes into powersave mode. I tried another monitor, no change. The computer won't turn off, unless I hold the off button down for awhile. The wierd thing is that when the computer is unplugged, it comes back on when plugged in again. But there is never any flashing lights below the on button that indicates that the hard drive is working. I think this may be bad? I tried hitting F8 after turning it on, and nothing happens. It do... Read more

More replies
Relevance 71.75%

I have an Aspire E1-472P.  Some time after updating to Windows 10 I started having problems.  The recent one seems to be with the display driver since when using a second monitor the screen went black and said "Invalid Input" or something like that.  I read a few communities and see that Intel has updated the display driver, but the page suggested installing from Acer in case it is customized.  I checked Acer for any updated drivers for my machine's SNID and it listed the NVidia 10.18.13.5350.  My current display driver is Intel HD Graphics Family version 10.18.15.4248.  From the Acer site I downloaded the NVidia driver suggested (10.18.13.5350), but the install failed and gave a message that it could not find compatible hardware.  I read some similar posts but about different Acer models which suggested trying to downloading the Intel version.  But one user had trouble doing that, and the suggestion was to use the Acer version.  So what approach should I take since the Acer driver didn't work?  Your help would be appreciated. 

Answer:Aspire E1-472P Display Driver Update Failed

If you have Intel graphics, you can't use a Nvidia driverGo to Device Manager and roll back the driver.Start, search Device Manager,Clickthe arrow on Display addapters and double click your adapter. Click driver and roll back.Or install this driverVGAIntelVGA Driver10.18.10.3304154.4 MB2013/10/11Download

1 more replies
Relevance 71.75%

If your Surface Book, Surface Pro or Windows device fails to install a Firmware or Device Driver update, and which may be accompanied with a Blue Screen, then you may try this:
Open the C:\Windows\inf\setupapi.dev.log file.
Search for error Failed to install device instance among the recent entries.
Above this error you will see a remark saying which .inf file caused the failure. Let us say it is abc99.inf
Now open an elevated CMD, type the following and hit Enter: pnputil -d abc99.inf
Replace abc99.inf is the name of YOUR inf file.
PnPUtil (PnPUtil.exe) is a command line tool that lets an administrator perform the actions on driver packages. Here we are deleting the .inf file.
Now restart your computer and try to run Windows Update again.
Such corrupted Driver installs are being addressed in Windows 10 Redstone.
Source: Reddit.

More replies
Relevance 71.75%

So anyone got any ideas for this issue? It seems as if though its not hardware related and more driver/software related. I've put my cpu at stock settings underclocked my graphics card changed ram timings and this is a new set of sticks since i replaced them following someones post saying that that was their issue so gave it a try but apparently it isn't go in safe mode uninstall drivers run driver sweep reboot reinstall nothing problem persists and yes i do have the latest mobo/vid drivers.

[CPU] Intel? Core? i7 CPU 920 @ 2.67GHz (8 CPUs), Overclocked~4.2GHz
[RAM] 6GB Corsair Dominator DDR3 1600 Triple channel
[MOBO] Asus Rampage II Extreme X58
[GPU] GTX 285 SSC X2 SLI 740/1660/2800
[HDD] WD Velociraptor 300GB x2 raid 0 stripe
[PSU] Corsair 1000HX
[SC] X-FI Titanium
[Case] Lian Li PC-P80
[OS] Windows Vista? Ultimate SP1

Everything looks in order?

More replies
Relevance 71.34%

Hello all, first say that my English is very bad.My sister bought a Lenovo G560 laptop that had Windows 7 operating system. She asked me to change the operating system because she likes most Windows XP.I installed Windows XP normally. all good, but the audio driver is given on this page does not work. I've searched around the internet and I could not find the driver. According toEverest, the driver is "Conexant Cx20585".Please, I need your help, I'm going crazy and I did not concentrate on my studies for this.pleaseeee!!for more information, the error when installing the driver on this page is this:Failure to install the driver: Could not find the device for this driver(In Spanish: fallo en la instalación del controlador: No fue posible encontrar el dispositivo para este controlador)













Solved!

Go to Solution.

Answer:Failed installation of audio driver for Windows XP. Lenovo G560. Driver --> (Conexant Cx20585)

Hi Jose_Galdos,
 
 
That's listed as the Conexant Pebble High Definition Smart Audio.
Seeing as how it's HD sound, I think you'll need to load the Microsoft UAA driver first to get it running under XP.
 
Is  this the driver that you tried to install?
 
Dave

7 more replies
Relevance 71.34%

Hi, I've problems with update installation for my M55e. There's a yellow "PCI device" question mark shown in thedevices menu. Something seems not to be installed, but I don't have any additional PCI devices (graphics card,extra audio cards...etc.) installed in my PC. Therefore I assumed that it is the PCI chipset in general, buteven after chipset driver download and installation from Lenovo website, it's still shown in the devices menu. Also I've juddering screen windows when moving them...... What could it be? Thanks,Elton

More replies
Relevance 71.34%

Hi- Can anyone tell me how to do it? I´m trying to pair a Microsoft Bluetooth Notebook Mouse 5000 with a Lenovo T400 running Windows XP Pro with SP3 on it, and with all the latest Windows Update components installed on it  too, with no luck. The mouse is working, took it to the shop to return it, but worked on a laptop running Windows 7, and the bluetooth on my laptop is also working, since it pairs nicely with my cell phone. Tried pairing a Logitech mouse and that´s when I realized the problem might be the driver. I´ve tried updating the HID driver with the device manager, but doesn´t work, nor can I find it on the Microsoft site to download and re-install it. Please help!Thanks,Enrique

Answer:How can I update the Bluetooth HID Device Driver?

Download the Bluetooth driver from the T400 driver matrix:http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-72858I have the same mouse with my T400 and it works fine. Also, make sure the mouse is discoverable (light flashes alternating red/green on top) first.

7 more replies
Relevance 71.34%

I've been trying to get my computer back so that I can at least get some stuff on it I don't want lost for the past three days. I was updating an nvidia graphics driver and it froze. So I restarted my computer and things went down-hill from there.

Nothing I know to do (which is more than the average person) works. So most of (and perhaps all of) the quick fixes you all may suggest most likely have already been attempted at least once.

What I am experiencing now is a black screen with a gray bar on the top and bottom. The top is titled: Windows Boot Manager. This is written in the gray bar. The rest of the screen reads:

Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:

1. Insert your windows installation disc and restart you computer.
2. Choose your language setting and then click "Next."
3. Click "Repair your computer."

If you do not have this disc, contact your system administrator or computer manufacture for assistance.

Status: 0xc000000f

Info: The boot selection failed because a required device is inaccessible.

I am hoping someone can help me get make it so I can at least get some files off. System restore or anything like that is out of the picture because I was planning on getting an external hard drive for backing up, and haven't been able to yet. Ironically, payday is this Friday.

Anyway, I've even tried using ubuntu and also putting the HDD in another computer. Both ways it says that ... Read more

Answer:Corrupted OS files preventing boot after failed driver update

Did you try the suggested startup repair options with the windows 7 dvd/repair disc?

It may take several runs and will at least attempt to repair the partition table.

If you tried that already , then use the commands instead of auto startup repair - usually does the job.

If you have the disc and want further advice, post back.

If you don't have a 7dvd/repair disc , get one from here - the same bit version as your installed o/s ( torrent, but it's usually quick ):

Download Windows 7 System Recovery Discs ? The NeoSmart Files

9 more replies
Relevance 71.34%

Hi, i ave an E320 (1298-5QG, i.e. w/out preloaded OS) with a manually installed Win 7/64bit. BIOS version oi 1.11, every time i try to update the BIOS with BIOS setup utility from System Update i get the error message Driver Loading failed.What can i do to update the BIOS other than by getting en external optical drive to boot from and setup the BIOS from there?

Answer:E320 BIOS Update not working "Driver Loading failed"

hey elmarjason,if i'm not mistaken the bootable bios CD is in an .ISO format . what you could do is this and do note that this is a suggestion and not an official method from Lenovo.download the ISO file .get this software >> http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/use the above software to make a USB memory stick to become bootable.set your unit's bios to boot from USB and in theory; you should be able to load the bios for installation.





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

2 more replies
Relevance 71.34%

Hi all,

First time poster, advanced thanks for any help

Well here is the story: My PC suffered a crash playing world of warships. Initially it failed to re-boot and just blue screened, thankfully second time round it got far enough that I could load my last restore point. However once it then booted correctly my graphics were all basic (large icons, low resolution etc). None of my games - total war, world of warships would run correctly.

So I tired installing the Nvidia GE force generic driver. This got about half way through installation before crashing and blue screening my PC (again <Sigh>). I then tried running DDU and installing the GTX 560 driver manually but with the same result.

I read around a few forums, made sure I had uninstalled all Nvidia software and manually deleted the registry entries for Nvidia before trying a clean manual install again. Sadly the same result. I waited each time for the Windows 10 updater to try to install the driver before I tried my manual install to avoid a clash.

Now in parrallel with my failed efforts the Windows 10 updater has gamefully been trying to download the three updates below and failing each time:

'There were problems installing some updates, but we'll try again later. If you keep seeing this and want to search the web or contact support for information, this may help:

nVidia - Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics Adapter WDDM1.3, Graphics Adapter WDDM2.0 - NVIDIA GeForce GTX 560 - Error... Read more

Answer:Failed driver update for NVIDIA GeForce GTX 560 - Error 0x80246002

That's a sign of a dead GPU.

4 more replies
Relevance 70.52%

windows reports that the bhdrvx64 device is not working properly. I have Norton 360 on my computer which doesn't open now? Also I have TuneUp Utilities 2012 running; it tells me to find the driver, double click it, open the update driver tab, - there is no update driver tab; in fact there are no options to do anything with this file. Also noticed that Google Chrome didn't work at all - continued to receive this message - "Could not find local data files" Also my computer will not print and I receive the same message as above - I reinstalled Chrome, it's apparently fine - I have also reset my computer to about 8/13 date, using Windows system restore. Computer will not print, there is a yellow triangle over the BHDrvx64 device, I run Windows 7 on an HP laptop. So now what?

Answer:BHDrvx64 device not working - cannot update driver?

http://www.computing.net/answers/wi...Have a look at this.

2 more replies
Relevance 70.52%

the unknown device shows an yellow errorim not able to update the drivermy laptop is hp pavilion 15 notebook serieswindows 8

More replies
Relevance 70.52%

the unknown device shows an yellow errorim not able to update the drivermy laptop is hp pavilion 15 notebook serieswindows 8

More replies
Relevance 70.52%

I am currently using a Lenovo Z40-70 laptop running Windows 10 (upgraded from Windows 8.1 earlier).  In the "Device Manager", you can update the drivers of the different hardware components.  However, I could not update the drivers of three items, which are "UMDF HID minidriver Device", "IVD Bus Enumerator" and "Lenovo Primary iM Controller".  All of them are "Functioning Normally" but have an "Unidentifiable" location.  In addition, the first and third item are manufactured by "Lenovo Corporation" while the second item is manufactured by "(Standard system devices)".  Although none of these items should affect my normal usage of the laptop, is this problem a big issue or should I just ignore it?  Also, is there anything which I should do or should be done to fix this problem?  Thank you for everyone's attention.
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.

Answer:Z40-70 - Device Manager Update Driver Error

Dear suenkachun,
 
Welcome in lenovo community,
 
Please try to,
 
Right click unidentified driver from the device manager >> Properties >> Choose Details from the upper tabs >> from Property list choose Hardwares Ids >> take a screenshot.
 
Repeat that with every unidentified driver and send me screenshots for everyone.
 
Regards,
Joseph

3 more replies
Relevance 70.52%
Answer:Update Device Driver Wizard Not Working

I am trying to update Via audio drivers using the update wizard. The wizard finds the new driver and steps through its process to the point where it says ready to install. At this point the Wizard 'freezes' and stops responding. My OS is ME. Anyone got any ideas?

1 more replies
Relevance 70.52%

The number of drivers available from the official Acer driver download page for my computer the 6930G, is quite limited so, for instance, to get the latest Intel WiFi Link 5100 AGN driver I downloaded and installed the latest generic Proset Wireless version for Windows 7, 18.40.0 from Intel's site. However, the 5100 AGN driver version in device manager has not changed, and is still 12.4.1.4, but according to Intel, Proset wireless version 18.4.0 should update this to 14.3.2.1

When I update drivers from Acer's official page the device manager shows the newer versions.

Anyway, I'd really appreciate some help on this. Thanks in advance.

More replies
Relevance 70.52%

I have a new build using Windows 7 HP SP1 64-bit which has been up and running for about a month. MS updates for 11/14/12 included the Kernel-Mode Driver Framework version 1.11 for Win 7. This update failed to install (several times), even when done alone. First time since building system where it has failed an update. Only thing I have added since original build is a EVGA GTX 650 video card (last week). Anyone else experience this problem or know what the error code below indicates?
 

Answer:Windows update - Kernel-Mode Driver Framework version 1.11 failed

not with that particular update, but there have been times where I've manually downloaded the exe and installed it without issue, when it continually failed via Windows Update.
 

8 more replies
Relevance 69.7%

I have a friends laptop where after the last update to Windows 10 failed. I had to reinstall off a USB. I created the USB installer off of a Dell laptop. It loadded but there are unknown devices or missing PCI drivers in the device manager. Looking for help on the right driver for the specific device of if HP has a restore file.Product is HP Stream Notebook 11-R020NR. I tried downloading  sp72415.exe for chipsets and sp73310.exe for wireless adapter neither fixed the problem. Here is the PNP Device ID for problem devicesACP\INT3400\2&DABA3FF&0ACP\HPQ6001\3&11583659&0ACP\INT3403\1PCI\VEN_8086&DEV_22DC&SUBSYS_815E103C&REV_21\3&11583659&0&58PCI\VEN_10EC&DEV_5229&SUBSYS_815E103C&REV_01\4&C433F5E&0&00E0PCI\VEN_8086&DEV_2298&SUBSYS_815E103C&REV_21\3&11583659&0&D0    

Answer:Latest Windows 10 update getting PCI device driver issues an...

Hi, Please try: PCI\VEN_8086&DEV_22DC&SUBSYS_815E103C&REV_21Intel Dynamic Platform and Thermal Framework Client Driverhttp://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_161367_1PCI\VEN_10EC&DEV_5229&SUBSYS_815E103C&REV_01Card reader driver for XP,Vista,Win7,Win8,Win8.1,Win10http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...PCI\VEN_8086&DEV_2298&SUBSYS_815E103C&REV_21Intel® Trusted Execution Engine Drivehttps://downloadcenter.intel.com/download/24892/Intel-Trusted-Execution-Engine-Driver-for-Intel-NUC-...ACP\INT3400\2&DABA3FF&0Could be something to do with DellACP\HPQ6001\3&11583659&0HP Wireless Button Driverhttp://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_123643_1ACP\INT3403\1The first driver also fixes this Regards.

1 more replies
Relevance 69.7%

Hi guys ,I currently have an Alienware 15R3 with a recurrent  (BSOD) "Thread Stuck in Device Driver ".It recently went worse as I cannot boot into windows without this BSOD coming up.So I have decided to update my bios (currently in A06) through safe mode.However Murphy's law strike again as i get the "Unable to Load driver" error message when I execute the Bios update file.So i have decided to set up a Freedos on my USB stick and I copy the Bios Update file downloaded from Dell website in order to execute the Bios Flash Update directly from the Bios (F12 on launch --> Bios Flash Update) . However , another problem strike,  once in the GSET Bios Flash Update I cannot use the left / right arrow from the keyboard (only the ups and downs work) in order to select the bootable disk and run the program. I tried to plug another Keyboard through USB same problem .My Bios is open and I have no restriction in paramter of anykind.This is a story when everything goes wrong , so if anyone can help me I would really really appreciate .Thank you guys and Best RegardsGuillaume

More replies
Relevance 69.7%

How can I solve Playback & Record device not found in windows' sound?
Sound driver status in device manager still has no conflict and Realtek Audio manager can detect only plugged in jack. I have tried to reinstalled audio driver without any conflict but still nothing in windows' sound.

If I try to restore by windows restore point, would the problem solved?

Thank you

Answer:Playback & Record Device not found after update Driver

What "driver update" did you do?

There is nothing showing, either for the RealTek PC audio or the NVIDIA HDMI audio.

RIGHT click in a blank area in the Playback panel and check to Show Disabled and Disconnected devices. If nothing still shows up RIGHT click on the RealTek entry to highlight it in the Device Manager and then LEFT click "Uninstall". DO NOT uninstall the driver. Then restart the PC and when Windows starts it will detect and reinstall it.

1 more replies
Relevance 69.7%

I have an Aspire 5336 and I just updated to Windows 10. I know the computer is ancient...  When I start Photoshop it says I need to update the driver to the graphics card.  I looked up the driver on both the Intel and the Acer sites but since this computer is so old there doesn't seem to be an update.  Can anyone help?  Any insight would be most appreciated.Thanks!

Answer:Aspire 5336 Windows 10 and device driver update

Try thishttp://www.windows10forums.com/articles/compatibility-mode.7/

1 more replies
Relevance 69.7%

After installing Windows 10 Fall Creator Update 1709 on a ThinkPad T430 the current Version of Lenovos Driver for the Nvidia Optimus NVS 5400M will failed to install with error message: "The system can not find the file."  Also a direct driver of NVIDIA can not be installed. Can anybody help to get it working?Thanks!

More replies