Computer Support Forum

USB & Bluetooth driver signature's cannot be verified (Code 52)

Question: USB & Bluetooth driver signature's cannot be verified (Code 52)

I need some help with a Windows 7 (x64) system where bluetooth and usb devices have suddenly stopped working. When I go into device manager I see that my Intel USB 3.0 extensible host controller and my Intel Wireless Bluetooth show exclamations
on them. They both report that "Windows cannot verify the digital signature for the drivers required for this device".

This machine has been working fine for a while but suddenly stopped working correctly earlier this week. So far I have uninstalled recently installed MS patches. I installed the most current version of the drivers from Intel for these devices.
I've also ran sigcheck against both drivers and confirmed that they are signed.

As a work around, I use F8 and boot with driver signing verification turned off but that is certainly not ideal as I have to remember to do so every time the computer is restarted. Anyone have suggestions for a permanent fix?

More replies
Relevance 100%
Preferred Solution: USB & Bluetooth driver signature's cannot be verified (Code 52)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 92.25%

I want to dual boot windows 7 and windows 10.

I have windows 7 installed on my C drive. (disk manage image attached)

Win 10 (D drive) where I want to install windows 10.

IN installation process:
"Getting files ready for installation" completes about 25% and then it reboots and shows the error.

http://www.tenforums.com/attachments...windows_10.jpg
In boot option I have
1) Windows setup
2) Windows 7

When I click on option 1(setup), it shows the error and setup cannot from that point progress.

I have no problem booting and running windows 7(option 2).

Answer:winload.exe digital signature cannot be verified error code:0xc0000428

Hmm, maybe the logical partition causes a problem. (You can install on a logical as long as boot files are on primary as far as I know but who knows ).

Is the iso in good shape? Any memory issues?

4 more replies
Relevance 73.8%

i am trying to install windows 10 insider previews that was released in march 2016 , on my laptop from bootable DVD but unfortunately when the installation goes on 20 my laptop restarst and is says 'digital signature are not verified ' and avborts the installation how to fix it please help me

Answer:'digital signature are not verified '

i have a solution kindly follow this article :)
follow solution number 2, that will fix your problem ;)
the preview must have a few drivers that are unsigned , so disabling driver signature completely will solve this issue :)

2 more replies
Relevance 72.16%

When I go to Windows 8 from my Windows 7 boot loader it doesn't boot it just goes to winload.exe signature could not be verified.

As you can see from the video Windows 8 DOESN'T boot but Windows XP and 7 does boot fine (didn't show Windows 7 bcs I didn't want to make the video long)

Answer:Windows 8 winload.exe digital signature not verified

I got it working by somehow setting windows 8 as an Active Partition and re configuring the MBR or bcd or something like that.

2 more replies
Relevance 72.16%

Hi There,

I cloned my smaller SSD to my larger SSD I just purchased so I can relieve my space issue. The problem is that during the clone, I replaced my /boot/ and attempting to boot from the new drive gives me Winload.exe has a digital signature that cannot be verified

I have tried all typical startup repairs, fixing MBR, editing the BCD directly and adding a Windows 7 record on this drive, no luck.

The original drive has since been replaced with Win10 and I cannot re-clone.

I am thinking that the primary issue is that by copying the /boot/ section of my original drive, I replaced winload.exe and the fingerprint/'digital signature' does not match the new SSD, but the old.

Therefore, is there a way to generate a new winload.exe using the signature from this bigger drive?

Other than that, I'm thinking of installing Win7 again on the second half of my new SSD and taking the Winload.exe that is created there and copying that back to my cloned partition, would that work?

Really dying to get back into Win7, and doing a fresh install is not an option for me as I really need the Windows configuration and installed programs to work.

Any ideas are greatly appreciated!

More replies
Relevance 72.16%

Hi There,

I cloned my smaller SSD to my larger SSD I just purchased so I can relieve my space issue. The problem is that during the clone, I replaced my /boot/ and attempting to boot from the new drive gives me Winload.exe has a digital signature that cannot be verified

I have tried all typical startup repairs, fixing MBR, editing the BCD directly and adding a Windows 7 record on this drive, no luck.

The original drive has since been replaced with Win10 and I cannot re-clone.

I am thinking that the primary issue is that by copying the /boot/ section of my original drive, I replaced winload.exe and the fingerprint/'digital signature' does not match the new SSD, but the old.

Therefore, is there a way to generate a new winload.exe using the signature from this bigger drive?

Other than that, I'm thinking of installing Win7 again on the second half of my new SSD and taking the Winload.exe that is created there and copying that back to my cloned partition, would that work?

Really dying to get back into Win7, and doing a fresh install is not an option for me as I really need the Windows configuration and installed programs to work.

Any ideas are greatly appreciated!

Answer:Cloned OS --> Winload.exe digital signature cannot be verified

Hi and welcome to SevenForums,
Sounds like you upgraded the install to win-10 and are trying to use the same upgraded install
That is not exactly legal and is in violation of the free upgrade agreement

A more reliable method would of been to use a system image and restore the image to the new ssd.
Still not legal to use both though.

2 more replies
Relevance 70.93%

So, when I started my laptop this morning I got the error:

"A recent hardware or software change might have installed a file that is signed incorrectly or damaged....... error 0xc0000428."

I hit 'Enter' and it takes me to the screen to select an OS and the only one available is Windows 7 Home Premium. I can either hit F8 to supposedly select advanced options or enter to boot Windows 7. There are NO tools listed or boot options listed like there normally is. I'm just able to hit 'enter' or F8 and both of them take me back to that orignal error screen. Basically, I'm stuck in a loop between those two.

I tried my Windows 7 recovery CD but it still just takes me to these two screens and I can't get out of it.

I have searched other forums and threads and there is help for this issue, but everyone is able to use their recovery CD and I cannot.

Answer:winload.exe digital signature not verified & boot manager loop

Boot from Windows 7 recovery CD. Then select "command prompt". Where is bootmgr file?

attrib c:\bootmgr
attrib d:\bootmgr
attrib e:\bootmgr

Is it on C,D or E? Assume on E


Code:

attrib -s -h e:\bootmgr
del e:\bootmgr
Now perform a "startup repair"

9 more replies
Relevance 70.11%

After forcing a hard reset after my laptop hung up for a long time without any display it started trying to repair itself, unsuccessfully. It now permanently hangs up with the following message:
Recovery
Your PC/Device needs to be repaired
The Operating system couldn't be loaded because the digital signature of a file couldn't be verified.
File: \WINDOWS\System32\intelpep.sys
Error Code: 0xc0000428
You'll need to use recovery tools.  If you don't have any installation media (like a disc or USB device).  Contact your PC Administrator or PC/Device Manufacturer

More replies
Relevance 68.88%

Hi,

This is my first post on these forums, so please excuse me if anything is wrong.

Details of the problem: I have a Sony VAIO laptop that runs Windows 7 Home Premium x64. I recently downloaded the same version from digital river that has SP1 included and installed it on my laptop. I installed the drivers that I had downloaded from sony's esupport site which went fine. After I rebooted and tried to install the rest of the drivers, I started getting the Code 52 error: Windows cannot verify the signature of this driver. I've seen that every driver can be installed immediately after the system has been booted the first time (after a clean install). Once rebooted, it starts giving the code 52 error. I can't install my iPhone drivers (through iTunes) or PS3 utilities because of this. I'm wondering what changes during the first reboot. I must also say that these very same drivers were used on the previous build of Win 7 HP that I was using except that it did not have SP1 integrated.

Has anyone had a similar experience? I know that the digital signature check can be disabled using bcdedit.exe but I want Windows 7 to work the way it should: it should stop me from using unsigned drivers while installing signed drivers correctly. Does any one have any clue to what's going on with my Win7 on my laptop?

Answer:Driver Digital Signature error when using signed drivers (Code 52)

Hi ajayav, Welcome to Sevenforums.

Boot into Advanced Boot Options and disable driver signing checking.

The Advanced Boot Options screen lets you start Windows in advanced troubleshooting modes. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.

Disabling driver signature enforcement has helped a lot of users in fixing the issue.

You may also delete the USB "Upper Filter" & "Lower Filter" Entry and check if that helps.

Before we go any further, please first backup the Registry.

Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

1. Click “Start”, type “regedit” (without quotation marks) in the “Search” bar and press Enter.

Note: If UAC (User Account Control) pops up, please accept it.

2. Right click “Computer” (the root node) in the left pane, click “Export” under the “File” menu, choose “All” under “Export range”, and select “Desktop&... Read more

5 more replies
Relevance 68.47%

I am completely stumped by this problem. I will do my best to explain it and see what you fine folks can do.

I had an older bluetooth dongle, off-brand model, 2010-2011 year, that I installed on my new desktop computer. It worked, but sound quality on my Sony Dr-BT101 headset wasn't great. It worked well with my bluetooth-enabled phones and tablets, so I suspected the dongle. I bought a CSR8510 dongle, which came with a CSR Cambridge Radio Harmony software stack. I installed the software, and turned on the headset, paired it, but no sound came out of the headset. I went to Sound, saw no entries. Went to device managers and saw the parts in yellow. I tried to update the driver but all I got was Code 18 error and this weird message in the picture. I clicked on properties and saw this message.





Quote:
The drivers for this device are not installed. (Code 28)

There is no driver selected for the device information set or element.




I am stumped. I've tried uninstalling, re-installing, installing other Bluetooth drivers, waving a magic wand, none of it has worked. I'm thinking it's a problem with the Registry, but I am not sure how to proceed.

Any ideas?

Answer:Bizarre Bluetooth driver problem (Code 18 and Code 28 error)

Give this a try. It's free.
https://www.slimwareutilities.com/slimdrivers.php
You do need to resolve those Other devices category issues.

1 more replies
Relevance 66.01%

Hi All, I've been struggling for about a month.  Since I reinstalled Windows 10 Home (1067) (on a new SSD) the 100-15IBY Camera and High Definition Audio Driver has failed with Code 52 unable to verify digital signature. Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52) I've tried everything... permissions on files, bcedit command lines, downloading newer drivers from Realtek, reinstalling windows again with Legacy and then UEFI modes... disabling Secure Boot, reinstalling again with Secure Boot in "Setup - Disabled" mode... The only way to get the audio and camera to operate is to reboot in safe mode and disable the Driver Signature Enforcement - that only works for a single boot.  So I know the drivers are correct and the devices work... it's a trust issue with the drivers. The High Definition Audio one is specifically a Microsoft Driver... why wouldn't that be trusted!? Please anyone?  It must be a common problem - has anyone solved it? Tony 


























Detailed error.png ?13 KB

More replies
Relevance 62.73%

Good day ~~
I am working on a ASUS laptop (2 yrs. old), Windows 8.1
I a Bose wireless Soundlink speaker. I paired it to my cell phone and my other laptop, so I know it works. I paired it to my other laptop and shows it is paired. But, it does not connect.

I get:
Bluetooth Audio Device Properties under General a yellow triangle with an exclamation point. It states ~ The device cannot start (Code 10) Object Path Component was not a directory object.

I checked to see if the driver was up to date. It stated it is up to date.

Is there anything easy that I can do myself without paying a lot for the Geek Squad to fix this problem?

By any chance if I upgraded to Windows 10 would it fix this? I would prefer to stay with Windows 8.1.

Any help would be appreciated. Thanks!
 

More replies
Relevance 62.73%

S510p Touch  blue tooth does not work. In Device manager  Bluetooth Audio Device  properties: This device can not start Code 10. Have uninstalled, reinstalled, down loaded latest from Lenovo. Nothing works. I used to work part time at a compter store , built my last two laptops from parts. I'm not stupid. Buying a Lenovo was stupid.

More replies
Relevance 62.73%

Hi, 

So after upgrading my wi-fi card in my XPS 13 9350 to a Killer ac1535 card, the driver for the bluetooth is not working after re-boot Code 19 Error is displayed in device manager, i have tried uninstalling and roll back same Error Code 19 please help

More replies
Relevance 61.91%

Hello, I recently received a bluetooth headset for my computer but I can't seem to use it. I've added the bluetooth headset to my computer and it shows up on my bluetooth devices list but it doesn't work. Troubleshooting the problem leads to Windows saying that it requires a driver however when I update the driver through device manager, it says that if doesn't need a driver.

I've connected this driver to my smart phone and it works fine but I can't connect it to my computer.

The headset is a Shinco AM7 bluetooth headset. I can't go to their website because its in Chinese and I can't read Chinese.

3x Bluetooth Peripheral Devices show up with unknown drivers in my device manager.

Answer:Bluetooth Headset Driver problem, Code 28

Would be very helpful if you completed your System Specs. Did the headset come with with a dongle as many desktops don't have the Bluetooth hardware only the software which can then recognize the hardware when inserted and often will need the correct drivers to function properly

4 more replies
Relevance 61.5%

ICQ:658684180 SELL GOOD CC + DUMPS TRACK 1/2 CODE 101 - 201 Verified !


- I really need good buyer and honest business for a long time , I have good software for hack credit card and dumps track

SELL DUMPS TRACK 1/2 , CODE 101 - 201 , BIN BUSINESS , PLATINUM ...AND I HAVE SELL SOFTWARE 

 https://www.youtube.com/watch?v=PFvwfNw48fg

----( MY ICQ : 658684180 )--------( Gmail : [email protected] )------

*SELL DUMPS - BUY DUMPS 101 - 201 - DUMPS FOR SALE SELL TRACK 1 & TRACK 2 WORLDWIDE DUMPS EUROPE - DUMPS ASIA - DUMPS USA - DUMPS FRESH DUMPS..
*HACK DUMPS VENDOR OF DUMPS SUPPLIER DUMPS ONLINE DUMPS SERVICE DUMPS - SELLER DUMPS STORE DUMPS SHOP DUMPS FORUM TRACK1 & TRACK 2..
*DUMPS SHOP - DUMPS SELLER - USA DUMPS - WORLDWIDE DUMPS - DUMPS SERVICE - FRESH DUMPS - DUMPS STORE - DUMPS SUPPLIER - SELL DUMPS..

Fresh new Update done :

Daily Fresh Morning UPDATE DONE ASIA USA BRA CANADA EU update Done
100% Validity .
Base available 
Cali
Texas
NYC
MICHIGAN
Maryland 
FLORIDA
OHIO
ARIZONA
PA
GA
NC 
NJ
Kansas
MA
NH
Massachusetts 

USA DEMOS

4000220382713416=180810100708300322 
4000220384312316=180810100376308130?%B400022038431 2316^BRUMBAUGH/JAMES/E^180810100376000000 
4000220384969305=180810100220309737?%B400022038496 9305^MCCREE/MARK/T^180810100220000000 
4000220385207275=180810100019300556 
4000220388325769=180810100686300882 
4000220389559234=180810100253305599?%B... Read more

More replies
Relevance 59.45%

Hi,

On Windows 8. 1, I had no issues with this speaker. It's a JBL Charge. After upgrading to 10 it worked fine until a reboot when it failed to connect (it pairs, but won't connect, and the speaker doesn't appear as an audio-out option in Sound settings).

The Bluetooth wizard in PC Settings says "Driver error" next to the speaker icon.

Poking around in device manager, I see this error:

"This device cannot start. (Code 10)
{Conflicting Address Range}
The specified address range conflicts with the address space."

The only references I find to this error online are for different (and quite old) version of windows, and seem unrelated to Bluetooth.

I can't even look at the "resources" tab for help because it appears to have vanished in Windows 10!

Is anyone else experiencing this?

Answer:Bluetooth speaker driver install fails, device manager error code 10

Did you find a solution? I'm having same problem.

3 more replies
Relevance 59.45%

Hi,

On Windows 8. 1, I had no issues with this speaker. It's a JBL Charge. After upgrading to 10 it worked fine until a reboot when it failed to connect (it pairs, but won't connect, and the speaker doesn't appear as an audio-out option in Sound settings).

The Bluetooth wizard in PC Settings says "Driver error" next to the speaker icon.

Poking around in device manager, I see this error:

"This device cannot start. (Code 10)
{Conflicting Address Range}
The specified address range conflicts with the address space."

The only references I find to this error online are for different (and quite old) version of windows, and seem unrelated to Bluetooth.

I can't even look at the "resources" tab for help because it appears to have vanished in Windows 10!

Is anyone else experiencing this?

Answer:Bluetooth speaker driver install fails, device manager error code 10

Did you find a solution? I'm having same problem.

3 more replies
Relevance 58.63%

I create a signed driver named fangcloud.sys, and signtool.exe to verify the driver like follow:
PS C:\Program Files (x86)\Windows Kits\10\bin\10.0.15063.0\x86> .\signtool.exe verify /v /pa D:\code\SyncNewVision\build
\windows\component\driver\64\win7\fangcloud.sys

Verifying: D:\code\SyncNewVision\build\windows\component\driver\64\win7\fangcloud.sys

Signature Index: 0 (Primary Signature)
Hash of file (sha1): 11C8FF8DD2070FA8A6EE7727007358812E26AA5A

Signing Certificate Chain:
    Issued to: VeriSign Class 3 Public Primary Certification Authority - G5
    Issued by: VeriSign Class 3 Public Primary Certification Authority - G5
    Expires:   Thu Jul 17 07:59:59 2036
    SHA1 hash: 4EB6D578499B1CCF5F581EAD56BE3D9B6744A5E5

        Issued to: Symantec Class 3 SHA256 Code Signing CA
        Issued by: VeriSign Class 3 Public Primary Certification Authority - G5
        Expires:   Sun Dec 10 07:59:59 2023
        SHA1 hash: 007790F6561DAD89B0BCD85585762495E358F8A5

            Issued to: Hangzhou Yifangyun Network Technology Co., Ltd.
            Issued by: Symantec Class 3 SHA256 Code Signing CA
            Expires:   Tue Aug 20 07:59:59 2019
            SHA1 hash: 12BA8EBB01FCA162472D6A6... Read more

More replies
Relevance 54.94%

Whenever I go to type a new e-mail on my Outlook Express 6.0 there is a code or link (not computer savy) there!!!!! I have to delete it before I start typing. I have tried everything I know of to eliminate this code but nothing works!!!!! I don't know why it keeps popping up everytime and I don't recall ever adding a Signature to my outgoing OE e-mail. How it got there I do not know!!!!! Would someone please explain (in English) how I can get rid of this annoying code. Us "Beginners" really appreciate your help.

Answer:Can Not Get Rid Of Signature Code

Unless the signature is placed there by your Antivirus, you can look for it in OE. Find at the top TOOLS, then go down the popup box to OPTIONS; you will see another box with a bunch of tabs, find the signature tab and click on it:check to see that the box, "add signatures to outgoing messages" is UNCHECKED.You may remove any signatures appearing in the large signature box immediately underneath.Also check the following tabs, if this doesn't solve the problem:Compose: make sure you have the "mail" box unchecked under "stationery" as well as under "business cards."Security: make sure "digitally sign all outgoing messages" is unchecked.Hope this helps,Regards,John

3 more replies
Relevance 54.12%

d version of windows 10"?
socan u please help me....
My code is:
package First;

import org.openqa.selenium.WebDriver;
import org.openqa.selenium.edge.EdgeDriver;
import org.openqa.selenium.edge.EdgeOptions;

public class Demo {


// TODO Auto-generated method stub
public static void main(String[] args) throws InterruptedException {
// TODO Auto-generated method stub
System.setProperty("webdriver.edge.driver", "C:\\Users\\Ganesh\\Downloads\\MicrosoftWebDriver.exe");
        WebDriver driver = new EdgeDriver();
        Thread.sleep(5000);
        driver.manage ().window().maximize();
        Thread.sleep(5000);
        driver.get("https://www.goair.in/");
        Thread.sleep(5000);

}

}

More replies
Relevance 54.12%

I have problems with Java, namely, whenever I try to use it, it says "Code Not Verified" and doesn't give me any advice on what to do. I have reinstalled it countless times and used the little program on their site to see if it's registered or whatever and it always is.

Any advice?
 

Answer:Java: "Code Not Verified"

7 more replies
Relevance 54.12%

Can anyone help me figure out why XP keeps shutting down. Received the below error code:BCCCode: 100000d1BCP1: 0100014BCP2: 0000002BCP3: 0000000BCP4: EFBD3ED7OSVer:5_1_2600SP: 2_0Product: 768_1Thanks for any assistance.

Answer:Error Signature Code in Windows XP

Googled.click here

1 more replies
Relevance 52.07%

Hello forum!

I am somewhat lacking in computer skills, any help would be dearly appreciated!

Windows suggested I update my graphics driver, I let AMD autodetect and install but blue screen of death ensued. Now, I have a charming black frame (dead space) around my screen and the colors are f:d up. In Device Manager it reads that the digital signature can't be identified (code 52) for my graphics card.

What the h happened? And why is my computer looking the ugly way it does? How do I fix it? Sorry if I left something out, I am really tired right now.

Also, I can't open the Catalyst Control Center, the hourglass shows up for half a second then disappears and nothing else happens (wtf on top of everything?)

Answer:ATI Radeon 5770 Update, resulting BSD, code 52 can't verify signature

OS:Windows 7 Home Premium 64
Manuf. Dell Inc.
Mod: Studio XPS 8100
BIOS: Default System BIOS
Processor: Intel Core i7 CPU [email protected] (8 CPUs). ?2.8GHz)
Memory: 8192MB RAM

2 more replies
Relevance 52.07%

Help! Cannot use USB keyboard or mouse due to Code 52 error
'Windows cannot verify digital signature for USB drivers'
Have updated drivers
Have uninstalled and reinstalled drivers from Intel
Have reinstalled drivers from MSI motherboard driver DVD
Have tried manually disabling "digital driver enforcement" during boot
Have also tried to bypass unsigned driver with DSOE Driver Signature Enforcement Overrider 1.3b
All with no luck
A little help here?

Answer:Code 52 error- Windows cannot verify digital signature for USB drivers

A little help here??

9 more replies
Relevance 52.07%

Hi, new here.

Trying to put Windows 7 Realtek AC'97 5.37 (6.0.1.6305) drivers downloaded directly from Realteks site onto my Windows 7 Home Premium 32bit PC (w/ latest updates) but during installation, I continue to get the popup about the "Windows cannot verify the publisher of this driver software". When I tell it to install anyway, the popup goes away then re-appears again and just does this infinitely.

I have taken multiple steps to stop the driver signature enforcement of windows security starting with running in Test mode and then also admin cmd line bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit.exe -set TESTSIGNING ON

and the security warning continues to pop up. Additionally I have to click on the 'Do not install drivers' about 20 times before it goes away and the driver installation stops and self uninstalls that which has been installed halfway through.

I'm curious about this solution but I am unsure it will work without doing harm.

Does anyone know of a solution that I can do within windows so I can install my audio drivers?

Answer:Driver's blocked by Driver Signature Enforcement

Extract them and try to install them from device manager.

4 more replies
Relevance 51.66%

The DVD/CD reader has stopped working - does not seem to recognize DVDs or CDs when inserted. Tried uninstalling/updating drivers with no effect. Found error info while investigating and looking at device properties. Has anyone seen this issue? Thanks.

Answer:DVD reader not working - Windows cannot verify digital signature for the drivers req (code 52)

http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/dvdcd-drive-is-not-working-devic...

1 more replies
Relevance 51.25%

 I have 2 Thinkpads -X61 and a X61s - which show the same problem with the Ultrabay drive. After upgrading from XP Pro and Vista 64bit to WIN 7 32 and 64 bit versions, the DVD Burner is not recognized.The difficulty which I am running into with the original Lenovo DVD burner HL-DT-ST_DVDRAM_GSA-U10N________________1.05____ in the Ultrabay gets in the divice manager: "Code 52: Windows cannot verify the digital signature for the drivers required for this device"Googling the problem came with an solution where while rebooting W7 I have to press F8 and unable  loading only certified digital signatures. Then the drive works but only for one session until shutting down or until putting it in standby. On wake up or start without the solution it will not find the DVD drive.Unfortunatelly support hotline wants me to send maschines in after remoting into it and I do not see a sense to do so. Please release a patch/singed driver as it is all original Lenovo equipment and hardware is working normal when applying the reboot & F8 solution.I am updating all drivers regulary and nothing was released yet to take care of this problem.Thank you.PS I am still under warranty. Case #13PVLTH 

Answer:HELP- Error Code 52 Windows Digital Signature Lenovo DVD Burner HL-DT-ST_DVDRAM_GSA-U10N_1.05

Hi there just wondered whether you ever fixed your error code 52 problem and if so how?I am now sitting with the same problem and I have a Lenovo V570c laptop.  Please help me.

2 more replies
Relevance 51.25%

Hey I'm Looking For Someone Who Can Help Me With This Problem THAT Im Having With My Windows Xp Installation. After Having Some Problems With My Windows I Recently Decided To Reinstall Windows Xp. In Doing That I Created Some Type Of Problem. MY FIRST MISTAKE WAS NOT CREATING A BACKUP DISK AND NOW I'M LOST. I Now Have No Windows Due To The Fact While Im Installing Xp I Get A Fatal Error Message Indicating Error Code 800b0001, I Have No Idea On Wat I Should Do, The Problem Occurs Time After Time And Now Im Left With No Windows. Can Some One Help Me? What Should I Do?
It Also Says Something About The Nc5iis File, How Do I Repair This Problem?pleaseeeeee I Neeed Help..thanxxx
 

Answer:Problems Installing Windows Xp, Get Error Message 800b0001, Signature Code Invalid

8 more replies
Relevance 50.02%

New HP Desktop with Windows 7 x64 (and latest upates). All USB ports are down because of driver error. Tried to install drivers from manufactures site (HP) and from Intel. Everytime I see the Code 52 error in device manager. I have tried everything that
I can think of. Any ideas how I can get this to work?

More replies
Relevance 50.02%

Does anyone knows whether the Acer Aspire 5253-BZ661 laptop has a built-in bluetooth device in it? Reading from articles on the internet, I don't see any information regarding this laptop's particular model having a built-in bluetooth device in it but has a bluetooth driver and suite ready for the download at the acer main site.

Answer:Bluetooth driver for Acer Aspire 5253-BZ661 but no bluetooth hardware?

May be a option on some models.

6 more replies
Relevance 50.02%

I have a Thinkpad e330 with windows 7.I bought a bluetooth speaker and I'm desperatly trying to use it.I've come across different forum posts about the same problem, but i don't seem to be able to solve the it.So, the computers recognizes the speaker and tries to install the device, but then says that the driver is missing. So I downloaded the bluetooth driver with enhanced data etc etc.I ran the application and it saved a new folder, whose name is TPBTooth. I doubled click on Setup, start the installation, which stops automaticallt stating that there's no device to be found. Which is not true, because the device is on and the computer even recognizes it.That's all, can you help me?Thank you very much!

More replies
Relevance 49.61%

I disable driver signature pressing 7 button:



But when try to install unsigned driver I get this error:


The third-party INF does not contain digital signature information

+ info: I folow the next manual to instal this drivers.

Answer:Can't disable driver signature

That will only work for that one boot up by the way. There is no way to permanently disable driver signature enforcement. Not that I know of anyway. On the next boot up its enabled again.

3 more replies
Relevance 49.61%

I used option 7, on troubleshooting startup, to disable driver signature enforcement and allow me to install an Argyll CMS driver for an i1 spectrophotometer. Do I have to re-enable signature enforcement or will it come back on at the next restart?

Dave

More replies
Relevance 49.61%

Hi All,

Good Day.

I use <g class="gr_ gr_15 gr-alert gr_spell gr_run_anim ContextualSpelling ins-del multiReplace" data-gr-id="15" id="15">sigverif</g> and check and found out that that's 5 files have not been digitally signed. It surprised
me that 5 of them are system files. I don't know should I remove it, if anyone had this knowledge kindly advise me. 

Below are the 5 files.

peauth.sys
usbd.sys
usbehci.sys
usbhub.sys
usbport.sys

Thanks!

More replies
Relevance 49.2%

I need to know whether the hardware and latest updated driver supports Bluetooth 4.0 or 4.1 (Bluetooth 4.1 was official approx. the same time this machine was purchased)It seems that HP bluetooth driver descriptions do not display this information (versions of bluettoh supported, and bluettoh profiles might also be nice). This machineCommon Name                                           HP Touchsmart Envy 17Product ID                                                     E9G82UA#ABABroadcom Bluetooth Driver:                 12.0.1.695 Rev.A TIA.  

More replies
Relevance 49.2%

Hi,
I went from windows XP to 8.1 and abruptly back to XP until the free windows 10 upgrade, and I'm still learning where the mustard is, so to speak,so if this is a really dumb question please forgive me. I bougtht my husband a nifty piece of hardware that acts as a bridge between a guitar, microphone and computer, but windows 10 won't let me install it because it doesn't have a "signed driver." I assume this is Micro-speak for "didn't pay off Microsoft." I'm sure this is a safe piece of hardware--it there a way to disable the demand for a signed driver, install it, then put this "safety" back in place? And have everything work? Thanks very much. Please use small words...
 

Answer:Windows 10 Driver Signature Snag

Here you go ...

http://windowsreport.com/driver-signature-enforcement-windows-10/
 

2 more replies
Relevance 49.2%

How do i disable driver signature enforcement on Windows 7?.

Answer:Disable driver signature enforcement

  
Quote: Originally Posted by rmw020


How do i disable driver signature enforcement on Windows 7??????????


There are 2 ways:

1) Registry

HKLM\SOFTWARE\Policies\Microsoft\Windows NT\Driver Signing\BehaviorOnFailedVerify

Set as DWORD = 0

2) Command Prompt: Make sure you "Run as Administrator"

bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit.exe -set TESTSIGNINGON

Please note that this can be very DANGEROUS!

5 more replies
Relevance 49.2%

Is there a way to make sure this is turned on?? I turned it off to try to install a trackpad driver on a my laptop.. but is it just "back on" after I restart or something??

More replies
Relevance 49.2%

From the Metro Start Screen, open Settings (move your mouse to the bottom-right-corner of the screen and wait for the pop-out bar to appear, then click the Gear icon).
Click ?More PC Settings?.
Click ?General?.
Scroll down, and click ?Restart now? under ?Advanced startup?.
Wait a bit.
Click ?Troubleshoot?.
Click ?Advanced Options?
Click ?Windows Startup Settings?
Click Restart.

I can't follow or use these steps because whenever I click on a Metro setting it just stays there, nothing happens, I don't get take to General or an Metro setting I want.

Please help.

I really need to disable driver signature enforcement on W8 RP x86

Answer:Disable driver signature enforcement

First, you only have about 6 weeks before the RP expires. Why not get the final version? Or at least use the 90 day trial, which will last longer.

Second, did you disable UAC? Many things don't work in Metro if you disable UAC.

3 more replies
Relevance 49.2%

Hi everyone!

This is puzzling me a bit. I get the 0xc0000021a BSOD and can't get on to my computer unless I "Disable driver signature enforcement" in Advanced Startup Settings.

I looked through my computer using sigverif.exe to find out what signature hasn't been verified. I find that a rzwizardpkg.exe is not verified but also that it doesn't exist where it is meant to be. I've attached the log and screenshot of the location as well as the debug files.

I'm guessing this is what is causing the issue? If so, does anyone know how to remove this from the sigverif check? My computer runs fine without it and I've also attempted to permanently disable the driver signature enforcement permanently using Test mode and some bcedit commands with no luck. I think that since it is not finding the file in question it crashes out? My computer doesn't also seem to be producing a minidump for this error :/.

I also tried moving the rzwizardpkg file from a location it is stored in the driverstore to this location and the signature was fixed BUT on startup or shutdown the file is deleted to cause the error again.

Another thing I tried was reinstalling the Razer drivers to no avail.

Anybody have any ideas?

Many thanks for any help!

More replies
Relevance 49.2%

I have an android phone which the google adb driver doesn't include, so i modify the inf file and add my PID and VID.
Of course this corrupt the signature so i reboot to disable the signature and install it.

And i then reboot the machine again to make signature enforcement enabled again. but then i found my adb doesn't work properly

Why? doesn signature enforcement affect installed driver?

More replies
Relevance 49.2%

Hi everyone!

This is puzzling me a bit. I get the 0xc0000021a BSOD and can't get on to my computer unless I "Disable driver signature enforcement" in Advanced Startup Settings.

I looked through my computer using sigverif.exe to find out what signature hasn't been verified. I find that a rzwizardpkg.exe is not verified but also that it doesn't exist where it is meant to be. I've attached the log and screenshot of the location as well as the debug files.

I'm guessing this is what is causing the issue? If so, does anyone know how to remove this from the sigverif check? My computer runs fine without it and I've also attempted to permanently disable the driver signature enforcement permanently using Test mode and some bcedit commands with no luck. I think that since it is not finding the file in question it crashes out? My computer doesn't also seem to be producing a minidump for this error :/.

I also tried moving the rzwizardpkg file from a location it is stored in the driverstore to this location and the signature was fixed BUT on startup or shutdown the file is deleted to cause the error again.

Another thing I tried was reinstalling the Razer drivers to no avail.

Anybody have any ideas?

Many thanks for any help!

Answer:BSOD from Unverified Driver Signature

Okay, so I managed to get the file to stick in the razer wizard package folder and found that this isn't what is causing the issue. Any other ideas from people? What's the best way to update drivers?

2 more replies
Relevance 49.2%

i wanted to play my pc games with my ps3 controller and from a tut i press to disable signature driver and now noting works on my pc i cant move my mouse i cant type on my keyboard help meeeeee

Answer:Disable driver signature and i massed up

i rebooted 100000 times and asked my friend he said to take out the battery on my motherboard and put it back should i do that?

1 more replies
Relevance 49.2%

hello
i have windows 10 1607 Redstone 64Bit
i want to install flashtool drivers to flash my android phone.
at first i see it couldnt install so i googled a bit and found that i need to disable driver signature enforcment,
so i found 2 solutions:

1_going to advanced troubleshooting option by holding shift while clicking restart or just going to settings>update and security>recover>advanced option and press restart
2_by doing some Cmd command to edit the "bcdedit.exe' file

i tried both of them and the results i get are all negative
none of them works for me.
1_i dont have advanced options...i only have "turn off pc" in the blue screen that appears()
2_the cmd cannot find the file "bcdedit.exe" while i found it and it exists.()

i tried google again..but this was like no one had this before...so i found here.
what should i do?

---
i took some videos by my phone to make it easier to understand my problem (the quality may be a bit low):
Cmd not working
No Advanced Trouble Shooting Options

Answer:Cannot disable driver signature enforcment

Hi, could you please post a screenshot of Disk Management?

Windows key + X, click Disk Management

Thanks

25 more replies
Relevance 49.2%

so, now i have to pres f8 like a to load my realtek drivers. bcdedit /set TESTSIGNING OFF puts me in test mode but the realtek drivers still dont work. red x so how do i disable this * pc is offline i dont care.
maybe this _ NGOHQ.com

problem

no audio device installed. on 5gb RT 7 Lite os. help me diagnose

More replies
Relevance 49.2%

I was trying to get my PS3 controller working with my PC, and followed a tutorial and it told me to disable driver signature enforcement, which I did...and now none of my ports work. my wireless kb/m don't work either.

I know i did something stupid..I just need help. All I got to use is a plug-in keyboard.

Answer:I messed up - Driver signature enforcement

Which method did you use to disable enforcement?

9 more replies
Relevance 49.2%

What tool can i use to test a drivers digital signature, can i use sigverif.exe to do this ?

Answer:Driver digital signature test ?

Quote:





Originally Posted by Micheal01


What tool can i use to test a drivers digital signature, can i use sigverif.exe to do this ?




Yes, you can use this in vista/7, if your needing to test it with a certain amount of drivers you are installing this will help.
Windows 7 Simplified: Sigverif.exe
If your needing this for windows xp, not quite sure but you could check with a windows dedicated forum and they'll let you know immediately if it is or not.

1 more replies
Relevance 49.2%

Hi,
I have the specs below, i modified the TCP/IP driver file to allow for more connections. The problem is that it causes an error on Windows boot. I have to press F8, then choose 'Disable Driver Signature verification', or something similar, to get Windows to boot successfully.

Is there a way to permanently disable that verification, instead of having to press F8 everytime i boot to choose that option.

Thanks.

Specs:
CPU: Intel Pentium D 925
RAM: Spectek 2048MB, DDR2-533
MB: Gigabyte GA-8I945P-G, Intel 945P
GFX: Chaintech nVidia 8800GT 512MB
HDD: WD 160GB, SATA2
Sound: Realtek ALC882 7.1-Ch HD
Monitor: IBM 21" P202
OS & DSL: Windows Vista - Ultimate, ADSL 256/64Kb/s Connection
PSU: Task International 450 Watt (12v/26A)

Answer:Driver Signature on boot error!

Hello os008

my good friend jcgriff2 altered me to a certain peice of software that allows you to do exactly that

Downloaded Autoruns double clicked file, once opened then opened the Boot Execute and unchecked autocheck .....(Whatever the drive maybe that it checks) then rebooted ofcourse




Regards




Craig

8 more replies
Relevance 49.2%

I am trying to install a 3rd party driver which Windows 8 won't allow me, so I have been googling a lot on how to and found that I need to disable the Driver Signature Enforcement. I have tried this: "General -> Advanced Setup -> Restart Now -> Troubleshoot -> Advanced Options -> Windows Startup Settings -> Restart".
And when it reboots it just reboots like normal and I log in and nothing changes(Meaning I never came to this screen: http://www.mk3000.it/wp-content/uplo...nforcement.jpg). I do have dual boot with Windows 8 and Ubuntu.

does anyone have any idea on how I can install this driver on Windows 8?

ps. I have also tried this:
Step 1. Open the Windows command promt as ?Run as Administrator?.
Step 2. Run ?bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS? (without the ??).
Step 3. To finalize the process run ?bcdedit -set TESTSIGNING ON? (without the ??).
Step 4. Reboot and you?re done.
Taken from here: How To Disable And Bypass Driver Signature Enforcement In Windows 8 | Six Columns

More replies
Relevance 49.2%

hello
i have windows 10 1607 Redstone 64Bit
i want to install flashtool drivers to flash my android phone.
at first i see it couldnt install so i googled a bit and found that i need to disable driver signature enforcment,
so i found 2 solutions:

1_going to advanced troubleshooting option by holding shift while clicking restart or just going to settings>update and security>recover>advanced option and press restart
2_by doing some Cmd command to edit the "bcdedit.exe' file

i tried both of them and the results i get are all negative
none of them works for me.
1_i dont have advanced options...i only have "turn off pc" in the blue screen that appears()
2_the cmd cannot find the file "bcdedit.exe" while i found it and it exists.()

i tried google again..but this was like no one had this before...so i found here.
what should i do?

---
i took some videos by my phone to make it easier to understand my problem (the quality may be a bit low):
Cmd not working
No Advanced Trouble Shooting Options

More replies
Relevance 49.2%

As you know in Windows 8.1 you can use Shift + Restart combination to disable driver signature enforcement. But the problem is this is not a permanent way for disabling... Every time you must do that.
I have read that the following commands can do permanently:

Code:
bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON


Having tested the above commands. Although after restarting windows I see a watermark that I'm in Test Mode but I would not able to install my unsigned driver. I am able to install my unsigned driver by shift + restart way only.

First, do those commands still work on Windows 8.1 64bit?
Second, what would you recommend to disable driver signature enforcement permanently?

More replies
Relevance 49.2%

I have an android phone which the google adb driver doesn't include, so i modify the inf file and add my PID and VID.
Of course this corrupt the signature so i reboot to disable the signature and install it.

And i then reboot the machine again to make signature enforcement enabled again. but then i found my adb doesn't work properly

Why? doesn signature enforcement affect installed driver?

More replies
Relevance 49.2%

i need to disable driver signature enforcement

i was told that pressing f8 at boot where safe mode is etc would have this option, but i tried that and it definately doesnt.

I tried googling but seems to be all answers about VIsta and none for xp, even filtered out the word vista and still couldnt find an answer

any help?

Answer:disable driver signature enforcement

http://www.mydigitallife.info/2007/1...in-windows-xp/

1 more replies
Relevance 49.2%

hi.i'musing a netgear wifi adapter wn111v2,driver 3.5.0.7 which is the latest for w7.the driver installs but will not work because i get a message:this driver is not digitally signed by microsoft.one would think netgear would get their driver signed.the only way it will work is if i press f8 on reboot and stop driver signature enforcement.is there a way to stop driver signature enforcement permanantly as it gets tiresome to press f8 on every reboot. thanks.

Answer:[SOLVED] driver signature enforcement

If you want to turn off device driver signing in Windows 7 completely, do the following.
Hit the Win+R keys together to open the run dialog. Type gpedit.msc to open the local groups policy editor.

Expand ‘Administrative Templates’ (it’s under ‘User Configuration’). Expand ‘System’. Click ‘Driver Installation’.

In the right panel, double click on ‘Code Signing for Device Drivers’.

Choose ‘Enabled’ in the window that appears. In the underlying options, choose ‘Ignore’. This disables drivers signing in Windows 7, and now you can install unsigned drivers in Windows 7.

Click Apply, OK. Restart your computer to install unsigned drivers.

9 more replies
Relevance 49.2%

I personally don't have a need for such a program right now, but thought the more adventurous among you may have a use for it...

http://www.ngohq.com/home.php?page=dseo
 

Answer:Driver Signature Enforcement Overrider 1.0?

http://hardforum.com/showthread.php?t=1299697
 

2 more replies
Relevance 48.38%

Does anyone know how to PERMANENTLY disabled driver signature enforcement in Windows
8.1?
I have an old piece of hardware that will never have signed drivers for 8.1.  The driver installs and works just fine.  I tested by going to advanced startup options, and choosing "7) Disable driver signature enforcement".  The driver
installs and works fine for one session.  After reboot, the driver refuses to load because it isn't signed.

I have also tried:

bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKSbcdedit -set TESTSIGNING ONDisabled UEFI Secure Boot (in system BIOS)
The unsigned driver still fails to load after a reboot.
Please help, this is driving me bonkers!

-Jon

Answer:Permanently disable driver signature enforcement on Win 8.1 x64

Since a patch for Vista RTM, the option to PERMANENTLY disabled driver signature enforcement is removed. There are tools outside to workarond it:

http://www.ngohq.com/?page=dseo
http://uhlik.sk/?page=swreadydriver

But I have no idea if they still work in Win8.x"A programmer is just a tool which converts caffeine into code"

7 more replies
Relevance 48.38%

Hello guys,

I am using modified soundcard drivers, and a new version came out, so I uninstalled everything, rebooted into advanced setup, hit 7 to disable driver enforcement, but this didn't work magically. The drivers wouldn't install, not even older versions of the modified drivers (that I had just deleted previously). Only the original drivers from Creative would load. I then tried the DDISABLE_INTEGRITY_CHECKS and test mode, which did show up the test mode prompt and everything, but it still wouldn't install unsigned drivers. The only thing I have changed since being able to install them without problems is that I've downloaded a bunch of windows updates. What could be the problem?

Thanks for your time!

Answer:Cannot disable Driver Signature Enforcement anymore

System Restore prior to updates. Do not delete older drivers, just select the new ones. If all OK, run Windows Update again.

1 more replies
Relevance 48.38%

Hello,

Anyone using that program that allows one to use, supposedly, unsigned drivers ?
It's fron NGOHQ.com

Called: Driver Signature Enforcement Overrider.

If so, would appreciate it very much if you could contact me off line to discuss usage of; hate to bother everyone again with my tale of woe.



Thanks,
Bob

Answer:Anyone Using Driver Signature Enforcement overrider Program ?

We use the Forum to post back and forth so everybody read and learn. Doing this off line defeats the reading and learning.

4 more replies
Relevance 48.38%

Hi!
My friend uses in his Windows 7 Ultimate SP1 x64 device which driver has no digital signature and when he select not at begin of boot disable driver signature enforcement, his device works not and in Device Manager is exclamation mark that device cannot work for driver signature missing.
So, when Windows starts he must always hit F8 to view advanced boot options and select this:





I have same problem with other device but in Windows 10.1607 Pro x64. I used BootUI Tuner to show advanced boot options always and I must hit 7 (or F7) to do the same - disable driver signature enforcement.

So, Q is simple: Is possible to disable driver signature enforcement permanently in Windows 7 and Windows 10? If, how?
Thank you for each help.
Miro
 

Answer:How to permanently disable driver signature enforcement?

Not that I have ever seen or possibility of leaving you system open to infections since it is probably not only drives that is protects. Most coding like that protect drives and software.

Why not just download the driver from the manufactures site and remove the one giving the issue and replace.
 

6 more replies
Relevance 48.38%

Hello

I ordered Toshiba recovery media drive from Toshiba website to start up a new system. I did it but now Wireless LAN, Bluetooth and card reader don' t work properly because : Windows can not verify the digital signature for that drivers. This is for Windows 7 and my laptop is Quosmio series
Anybody has an idea how to fix it ?

This is for Windows 7 and my laptop is Quosmio series

Answer:Windows 7 installation - Driver Signature Enforcement

Try to remove these drivers from the system and download them manually from Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

I really don't understand what may be wrong there because all drivers included in original recovery image are tested.

Test it please and send some feedback.

2 more replies
Relevance 48.38%

Hello!I would like to install latest Catalyst drivers for Win7 but the problem is that I would have to disable driver signature enforcement on every reboot in order for the driver to work..Is there a way to permanently disable driver signature enforcement ?

Answer:Permanently disable driver signature enforcement on Win 7 x64

Ati Tray Tools doesn't have a signed driver since its a community application with no $$$ to spare for certification program

29 more replies
Relevance 48.38%

I tired booting up with F8 and its still giving me an error when I try to install an unsigned driver.

Are there any other methods to disable it?
 

Answer:How to disable driver signature checking in Vista x64?

Isn't this one of the main reasons why you would have gone with Vista 64 right now?
 

11 more replies
Relevance 48.38%

Ok my Audio Drivers all ways say Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious
software from an unknown source. (Code 52) Ive tried everything to help doing F8 I tap it realy fast sometimes it works but most of the time i dont get the page up. I try doing in Command prompt doesnt work and i try in bcedit and none of these work. 

More replies
Relevance 48.38%

I have an Xbox Controller S running on XBCD drivers for my Windows 8 computer. When I used these drivers on my Windows 7 laptop, I used DSEO to enable test mode, and it worked perfectly. Using the same method sends Windows 8 into a BSOD, so that's out of the question. The other solution is to reboot from the Settings menu and manually disable it at EVERY STARTUP. Not something I want to be doing, for it will probably wear out something in the computer before long. So, is there any other ways to disable DSE without rebooting every time I want to use the controller?

My computer is a 5-month old ASUS M11BB, 3.7GHz AMD A4, with Win8 64-bit installed, if that's any help.

Answer:Disabling Driver Signature Enforcement, permanently.

Win+X then press AType: shutdown /r /o /t 0 <==== system will reboot to Recovery ModeTrouble Shoot->Advanced->Startup Settings->Disable Driver Signature

Hope this helps !!!

14 more replies
Relevance 48.38%

Nearly 5 days I have tried to install Windows 10 but with no luck. I always had an error code 0xC1900208 0x4000C and nothing works! I nave tried everything but nothing works! I tried to uninstall every device driver: my sound card; my videocard; camera. I even uninstalled all program to almost clean Windows and unplugged the soundcard but nothing helped! But finally I found on the internet that I can turn off digital signature and voila instalation progres of has been finished! And I finaly lunched my Windows 10 but my problems are not gone! Every time I restart Windows it keeps restore back to Windows 7 again!!! And there is nothing I can do except to disable digital signature before booting???!!! Maybe someone can help me in this question or maybe there is some way to disable digital signature check before Windows starts???

More replies
Relevance 48.38%

Asus G1Sn Duo Core 1.83 Vista Home Premium. 4GB Ram

New HD install- recovery OS cd's ran fine, driver CD drivers will not load - not digitaly signed
reboot >f8 disable signature authoriztion. Ran recovery CD same error.
Device Mgr conflict on Sound & Video game
Wireless same.
Went to Asus website downloaded drivers - same denia
 

Answer:Driver Digital Signature not on recovery disk

User account control may be blocking you.
Might try turning it off.
http://windows.microsoft.com/en-US/windows-vista/Turn-User-Account-Control-on-or-off
Hopefilly then it will just prompt you that it is
not signed and allow you to continue.
 

1 more replies
Relevance 48.38%

Help!
I cannot disable driver signature enforcement
I have using CMD, by bcdedit.exe , still not working (bcdedit /set loadoptions DISABLE_INTEGRITY_CHECKS & bcdedit /set testsigning on ) even after running CMD as Administrator

Also, i have disable driver signature enforcement by setting ( general-advanced setting- etc)
Still no effect

Can anybody Help me?

Answer:Can't disable driver signature enforcement, Windows 8 x64

Still not solved yet..
PS : i'm using Windows 8 x64 OEM Version, so, i can't fix this problem by using new OS.

2 more replies
Relevance 47.97%

How to import built in Windows 10 Anniversary xinputhid.sys driver with signature .cat file for Xbox One Controller and use it in Creators Update ?

I can't find anywhere .cat file for xinputhid.sys and xinputhid.inf file.
Where Windows 10 store this built in singatures .cat files ?

Answer:How to import built in xinputhid.sys driver with signature .cat file ?

The inf file is in Windows\System32\DriverStore

10 more replies
Relevance 47.97%

I've just bought a laptop with Windows 10 and a couple of days in I have a problem. It won't startup unless I select the "Disable Driver Signature Enforcement" option.

I have used sigverif to see what drivers I have unsigned. I was surprised to see some jpg and gif files from the Synaptics touchpad driver coming up. I uninstalled Synaptics, but that didn't solve the problem. Now no files are listed as being unsigned, but it still won't startup unless I disable driver signature enforcement.

I'm not sure what could be causing it. The last thing i did before the problem happened was that I was having some difficulty ejecting an external hard drive. It wouldn't eject so I just tried to reboot and that's when the problems started. Could these two things be linked?

Thanks
Saamah

Answer:Computer won't startup unless I Disable Driver Signature Enforcement

Hello Saamah, and welcome to Ten Forums.

You might also see if performing a clean boot may be able to help ID the one.

Clean Boot - Perform in Windows 10 to Troubleshoot Software Conflicts

3 more replies
Relevance 47.97%

Is there a way to auto-select 'Disable driver signature enforcement' without user manually pressing '7' or ''F7' so that windows always boot with driver signature enforcement disabled after reboot? All the other methods such as testsigning, nointegritychecks, ddisable_integrity_checks no longer works.
Thank you!

Answer:auto-select 'Disable driver signature enforcement'

a. Press the Win + X and click on Settings.

b. Switch over to the “Update & security” section.

c. Then click on the Recovery on the left hand side.

d. Once selected, you will see an advanced startup section appear on the right hand side. You will need to click on the “Restart now” button.
e. Once your Computer has rebooted you will need to choose the Troubleshoot option.
f. Then head into Advanced options.
g. Then Startup Settings.
h. Since we are modifying boot time configuration settings, you will need to restart your computer one last time.
I. Here you will be given a list of startup settings that you can change. The one we are looking for is “Disable driver signature enforcement”. To choose the setting, you will need to press the F7 key.

2 more replies
Relevance 47.97%

Hello, i am new in Windows 8, i try to use "Disable driver signature enforcement" in Windows 8 Setting. But, it make my USB modem not work.
How i can rollback my setting?

Please help, thank you.

Answer:Rollback Disable driver signature enforcement setting

hello fanja & welcome to eight forums, if your USB Modem has any Previously released drivers install them ( if you have no idea where the previous drivers are, just ask the USB Modem re seller/Manufacturer.hope this helps.

4 more replies
Relevance 47.97%

how to disable driver signature on windows 10 creators update, i tried both Change the Startup settings and Use Command Prompt both( way used for W10 anniversary  update) are failed  if you know please help me

More replies
Relevance 47.97%

Hi. I was reading an article on a website when suddenly my computer restarted by itself. When it got to the part where it says Starting Windows, it restarted again. It would not go past that 'Starting Windows' part. I tried using Startup Repair from my Windows 7 installation disk but that didn't fix it. I tried to start up in Safe Mode. It only loaded some files before restarting again. The last file that it loaded before it restarted was CLFS.sys. I managed to get past the starting windows part by using Disable Driver Signature Enforcement. When I got to my desktop, a program called "Windows Recovery" started scanning my computer. It said I had to purchase their full module to repair my system. I knew it was virus so I went here to uninstall it. When I got back to my desktop again, I got a notification saying 'a program tried to change my default search engine' or something. When surfing, I would also get redirected to websites related to StopZilla. So I used system restore. When I did, I would no longer get redirected to websites related to StopZilla I'd still get redirected to other websites such as jamcamslive.com, all-allergies.com and some other websites I forgot. Another problem I have is when I use my Administrator account, I would get a BSOD. I had to use a regular account so I wouldn't get that. I would appreciate any help I get.

Answer:Windows won't load. Have to use 'Disable Driver Signature Enforcement'

Hi jeremiahh,Please follow the instructions in ==>This Guide<==. If you cannot complete a step, skip it and continue.Once the proper logs are created, then make a NEW TOPIC and post it ==>HERE<== Please include a description of your computer issues and what you have done to resolve them.If you can produce at least some of the logs, then please create the new topic and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the topic and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.

2 more replies
Relevance 47.97%

My computer has been lagging and slower that it used to be for some time.  I just found this today is there a fix and could this be cause the lagging on my system:   Description
Windows installed driver software that supports the basic features of your HID-compliant vendor-defined device. Its manufacturer may provide software that enables additional features.

Problem signature
Problem Event Name: PnPGenericDriverFound
Architecture: x64
Hardware Id: HID\VID_046D&PID_C52B&REV_1203&MI_02&Col03
OS Version: 6.3.9600.2.0.0.768.101
Locale ID: 1033
  

More replies
Relevance 47.97%

So this is my 14th or 15th time attempting to disable the driver signature enforcement so I can use motioninjoy to install my PS3 Controller driver to use for Rocket League. However, every time I run advanced startup, the process goes rather slowly before loading up my options. No worries at that point, but when I finally end up at the screen that has the options f1-f9, f7 being the disable driver enforcement, my computer immediately shuts off immediately after loading all of the options. I have no idea why it just shuts off... sometimes it shuts off just before it loads all of the options, but I have never been able to disable the driver signature enforcement thus far.

Any suggestions?

Answer:Can't disable Driver Signature Enforcement on advanced startup.

If is means anything, I looked through my system logs to find the Event ID 6006, or shutdown, and found 2 specific error events that appear just before the shutdown ID. They are both Event ID 10016 and Event ID 7031 or 7034. They are both labeled errors in the logs.

Event ID 7034 ? Service Stop Operations

https://www.microsoft.com/technet/su...16&Evtsrc=DCOM

1 more replies
Relevance 47.97%

Hi. I was reading an article on a website when suddenly my computer restarted by itself. When it got to the part where it says Starting Windows, it restarted again. It would not go past that 'Starting Windows' part. I tried using Startup Repair from my Windows 7 installation disk but that didn't fix it. I tried to start up in Safe Mode. It only loaded some files before restarting again. The last file that it loaded before it restarted was CLFS.sys. I managed to get past the starting windows part by using Disable Driver Signature Enforcement. When I got to my desktop, a program called "Windows Recovery" started scanning my computer. It said I had to purchase their full module to repair my system. I knew it was virus so I went here to uninstall it. When I got back to my desktop again, I got a notification saying 'a program tried to change my default search engine' or something. When surfing, I would also get redirected to websites related to StopZilla. So I used system restore. When I did, I would no longer get redirected to websites related to StopZilla but I'd still get redirected to other websites such as jamcamslive.com, all-allergies.com and some other websites I forgot. Another problem I have is when I use my Administrator account, I would get a BSOD. I had to use a regular account so I wouldn't get that. I would appreciate any help I get. Here is the DDS.txt. The ark.txt and Attach.txt are attached. For some reason, the first 8 check... Read more

Answer:Windows won't load. Have to use 'Disable Driver Signature Enforcement'

Hi jeremiahh, and welcome to Bleeping Computer.It has been a while since you posted your problem - so, please describe how your computer runs now and what problems remain...Then, firstly,Please launch Malwarebytes' Anti-Malware, click the Update tab, and then Check for Updates. Then choose the Scanner tab and select "Perform Quick Scan", then click Scan.The scan may take some time to finish,so please be patient.When the scan is complete, click OK, then Show Results to view the results.Make sure that everything is checked, and click Remove Selected.When disinfection is completed, a log will open in Notepad and you may be prompted to Restart.The log is automatically saved by MBAM and can be viewed by clicking the Logs tab in MBAM.Copy&Paste the entire report in your next reply.SecondlyDownload OTL.exe by OldTimer to your Desktop.Close all windows and double click OTL.exe.In the "Custom Scans/Fixes" window (under the light green bar) paste the following in bold:

netsvcs
drivers32
%SYSTEMDRIVE%\*.*
%systemroot%\*. /mp /s
CREATERESTOREPOINT
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\Results\Install|LastSuccessTime /rs

Click Run Scan and let the program run uninterrupted.When the scan completes, it will open two Notepad windows. OTL.Txt and Extras.Txt. These ... Read more

14 more replies
Relevance 47.97%

How to disable driver signature on windows 10 creators update, i tried both Change the Startup settings and Use Command Prompt both( way used for W10 anniversary update) (as per this site https://www.drivereasy.com/knowledge/disable-driver-signature-enforcement-windows-10-easily/ )are failed if you know please help me

Answer:How to disable driver signature on windows 10 creators update

Try the 'test mode':
run command prompt > bcdedit /set testsigning on
to turn it off > bcdedit /set testsigning off

more replies
Relevance 47.97%

So this is my 14th or 15th time attempting to disable the driver signature enforcement so I can use motioninjoy to install my PS3 Controller driver to use for Rocket League. However, every time I run advanced startup, the process goes rather slowly before loading up my options. No worries at that point, but when I finally end up at the screen that has the options f1-f9, f7 being the disable driver enforcement, my computer immediately shuts off immediately after loading all of the options. I have no idea why it just shuts off... sometimes it shuts off just before it loads all of the options, but I have never been able to disable the driver signature enforcement thus far.

Any suggestions?

Answer:Can't disable Driver Signature Enforcement on advanced startup.

If is means anything, I looked through my system logs to find the Event ID 6006, or shutdown, and found 2 specific error events that appear just before the shutdown ID. They are both Event ID 10016 and Event ID 7031 or 7034. They are both labeled errors in the logs.

Event ID 7034 ? Service Stop Operations

https://www.microsoft.com/technet/su...16&Evtsrc=DCOM

0 more replies
Relevance 47.97%

I've installed Win7 x32 on my sister's dell optiplex gx280 a few weeks back and has been running great until recently. The computer reboots after only a few minutes onto windows, and brings me to the boot manager saying that windows doesn't recognize the driver signature of this file, that a recent change if software of hardware or malicious program from an unknown source might have caused this, but doesn't say anything about which file was corrupted, Status: 0xc0000428.

I either have the option to press escape or enter, and when i press enter, it brings me to the same boot manager. I can't seem to be able to boot from any cd either, have tried that win 7 cd from my own computer and it boots just fine. Once again, it brings me to the same boot manager after attempting to boot from the cd.

Strangely, it did manage to give me the boot menu a few times, so I went into safe mode and did a system restore, but that didn't work either. And in the few rare chances that it give me the option to be able to go in last known good windows settings, it just reboots after a few minutes into windows and just takes me back to that boot manager error. and just sticks to that boot manager when pressing enter.

After a while of screwing around, I couldn't do anything anymore, as the comp didn't recognize the hard disk first, then after a while it didn't recognize the CD-ROM either. I did check in the bios, it say that the hard disk and the cd-rom were there, but "are not present". I... Read more

Answer:0xc0000428 Windows doesn't recognize driver signature.

Boot into Command Prompt at Startup
Then at the cmd console, type this:

Code:
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd

1 more replies
Relevance 47.97%

Some driver I have is messed up and my computer keeps trying to go through start up repair. Start up repair of course never works so i can't start windows normally.

I noticed though that if I disabled driver signature enforcement, then my computer can get to the login screen. I thought this had solved my problem but after logging in this way, I get a fake antivirus coming up, then shortly after a BSOD.

What I did on previous computers when something like this happened is go into safe mode, but like normal startup it cannot load and instead goes to startup repair.

The problem here is that when I get to advanced startup options, only one or the other (Disable Driver Signature Enforcement, or safe mode) can be picked.

How do I use both of these options simultaneously?
If you have another suggestion other than what I'm trying feel free to share that too.

Answer:I need to run safe mode while disabling driver signature enforcement

You could try this

Startup Repair Infinite Loop Recovery

If you are having trouble Starting Windows normally - Or try a system Restore to a Point Before this happened

See System Restore

Josh

1 more replies
Relevance 47.97%

how to driver signature on windows 10 creators update, i tried both Change the Startup settings and Use Command Prompt both( way used for W10 anniversary update) are failed if you know please help me

Answer:how to disable driver signature on windows 10 creators update

how to disable driver signature on windows 10 creators update, i tried both Change the Startup settings and Use Command Prompt both( way used for W10 anniversary update) are failed if you know please help me

more replies
Relevance 47.56%

Well, the subject speaks for itself...

Bcdedit.exe /set nointegritychecks ON no longer works in RTM... What are we going to do...

Here is an interesting thread




did this (see BLOG (http://www.microsoft.com/technet/Win...mspx?mfr=true)) but this is definately not for the faint of heart.



Can anybody explain to me what did respected sir planetf1 do and how can I do it for my favourite unsigned driver?

Answer:Any news on bypassing driver signature test on 64bit Vista?

I found this on the neowin forums. However, I had to run the driver before rebooting to make this stick.

Hope it helps.
Disable x64 driver verification:
In Vista x64 find the cmd.exe (<vista drive>:\Windows\System32\cmd.exe), right click on it and select "Run as Administrator"
In the box that opens type

bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS
Press enter and reboot

(before anyone asks yes its DDISABLE, that's with two D's!)
Enable x64 driver verification:
find the cmd.exe (<vista drive>:\Windows\System32\cmd.exe), right click on it and select "Run as Administrator"
In the box that opens type

bcdedit -deletevalue loadoptions
Press enter and reboot

And that all there is to it!

1 more replies
Relevance 47.56%

   Ok, so i've run into a large string of computer issues lately. My computer overheated, and I had to replace my power supply and video card. Since installing the video card, after my computer passes the
"starting windows" screen i get a blue screen with the error message stating that The initial session process or system process terminated
unexpectedly.     the only way that I can start my computer is if i disable driver signature enforcement. When I do that, the computer runs perfectly. The only problem is, I cannot leave my computer in that mode, because most of the games
that I like to play on this computer won't let me run them in that mode. Could REALLY use some help. Thanks.

More replies
Relevance 47.56%

Thank you for care
Absolutely I face problem with driver signature after formatting my laptop on the same edition of Windows 7 Home Premium x64, the problem is Windows fails to verify the signature
of MT65xx Preloader driver!
It was working fine before formatting and I only face this problem after format, but in the last time before formatting, I installed updates from Windows Update, so this time I can't
install any update because of Windows Update is keep searching and doesn't give any update list...
Some one here said: install singed driver or try sign driver yourself, I say: I work on Boxes and Service Tools for mobile phone, required to install unsigned drivers to work those
stuff properly!
Another thing, I can't switch to any other version of Windows 7 because I purchased this edition and I need Home Premium for my work
Any suggestion will be so much appreciated
Thank you

More replies
Relevance 47.56%

Thank you for care
Absolutely I face problem with driver signature after formatting my laptop on the same edition of Windows 7 Home Premium x64, the problem is Windows fails to verify the signature of MT65xx Preloader driver!
It was working fine before formatting and I only face this problem after format, but in the last time before formatting, I installed updates from Windows Update, so this time I can't install any update because of Windows Update is keep searching and doesn't
give any update list...
Some one here said: install singed driver or try sign driver yourself, I say: I work on Boxes and Service Tools for mobile phone, required to install unsigned drivers to work those stuff properly!
Another thing, I can't switch to any other version of Windows 7 because I purchased this edition and I need Home Premium for my work
I tried all the mentioned solution and recommendations and nothing solved my issue
Any suggestion will be so much appreciated
Thank you

More replies
Relevance 47.56%

Good day everyone!

I recently noticed that my graphics for Fallout 3 are quite choppy and particle effects are pixelated, so I went and checked for new drivers for my ATI radeon 5570. I downloaded the auto detect driver utility on AMD's website and downloaded the appropriate package for my Windows. I follow their installation guide to upgrade from older drivers and launch the "Express install" option.

My problems starts here, I get a 50/50 chance that, while installing the display driver, the screen goes black and flash a couple of times followed by a BSOD (I don't have the details it disappear too fast ). The other half is that the drivers will go past the screen going black and flashing, but the display is set to 800 x 600 (the basic resolution). I restart the computer only to find that I cannot ajust the display past 1024 x 768 on my 1920 x 1080 supporting monitor. Going inside the driver manager -> displays, reveal that my 5570 is not working (the exclamation mark icon is visible) and that "windows cannot verify digital signature[...] Error code 52"

I've searched all over the internet for people with a similar problem but found nothing to help me. If anything, I've found that other windows machine with seven are able to install this particular driver without a code 52. For now i've rolled back to the old settings that worked before.

Can anyone assist? I'm running out of ideas.

Cheers!

Answer:Problem installing AMD driver. Windows cannot verify digital signature

Download the catalyst software suite save it to your desktop then uninstall the current driver from control panel restart and install the new driver if a problem is still happening post back with the results.
AMD Catalyst

3 more replies
Relevance 47.56%

im unable to start my computer normally. i gotta use disable driver signature enforcement or after i hibernate my laptop. i have try system restore, and it doesn't help at all. the problem start after i shut it down and it went to updating. i close the laptop and went to work. when i came back from work i open my laptop and it was frozen on the updating screen. the laptop was heating up badly. i press and hold the power button and shut it down. after i waited for the laptop to cool down, i start it up. it went to that black screen. my option are to start normally and system restore. i have try both but it wont start normally. so i want to solve this problem.

More replies
Relevance 47.15%

Alrighty, so this happened after i followed these steps from steamcommunity ->
 

 
"Enable Kernel Integrity
Kernel Integrity checks must be enabled to play on VAC secured servers. To enable Kernel Integrity checks please follow the steps below:
Exit Steam.
Click the Start button, then 'All Programs', and 'Accessories'
Right-click on Command Prompt and click "Run as administrator..."
- Please note if you are running Windows 8 you will need to press Windows Key + X and select Command Prompt (Admin)
In the command prompt, type the following commands and press Enter after each command:
bcdedit /deletevalue nointegritychecks
bcdedit /deletevalue loadoptions
Restart your computer.
Launch Steam and test the issue again.
Turn off Kernel Debugging
Kernel Debugging must be turned off to play on VAC secured servers. To turn off Kernel Debugging please follow the steps below:
Exit Steam.
Click the Start button, then 'All Programs', and 'Accessories'
Right-click on Command Prompt and click "Run as administrator..."
- Please note if you are running Windows 8 you will need to press Windows Key + X and select Command Prompt (Admin)
In the command prompt, type the following command and press Enter:
bcdedit /debug off
Restart your computer.
Launch Steam and test the issue again.
Enable DEP
Data Execution Prevention (DEP) must be enabled to play on VAC secured servers. To restore DEP settings to default please follow the steps below:
Exit Steam.
Click the Start button, then 'All P... Read more

Answer:Cannot start windows without entering in "Disable Driver Signature Enforc" mode.

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis

1 more replies
Relevance 46.74%

Hello,

I did the Windows 10 update on Wednesday morning. I was happy to find out that my Bluetooth continued to work and I could still use my mouse. Today (Friday) my mouse stopped working. I went into device manager and had a look at the Bluetooth adapter. It said the adapter had reported problems and it had been stopped. I restarted my laptop in the hope that the Bluetooth would work when I started it up again; it did not. I no longer see Bluetooth settings in my Windows settings app and whenever I try to use built in Bluetooth Settings desktop app it takes me to a wizard that says 'Installing the Bluetooth Driver'. I have left this wizard for multiple hours twice and it seems to get stuck about 15% of the way in. I also do not see the driver or adapter listed in device manager.
I understand that this could be the Bluetooth driver not playing nicely with Windows 10 but I am confused, mainly because it has worked for the last 2 days. I have tried to install the latest Bluetooth Stack released by Toshiba and it doesn't work. It goes through the first wizard fine but when opening the second wizard where it says it is installing the driver, it gets stuck. As I said before, I have left that wizard for a long time and there is no progress.
Any help is greatly appreciated and I am happy to give any more information if needed.

Joseph.

Satellite L50-B-1HX
PSKT4E-06S023EN

More replies
Relevance 46.74%

.I reprogrammed my laptop Samsung with the model code NP-N102S-B02NG. so when I'm connecting my laptop to the wi-fi i cannot connect because it has no driver for Ethernet and Network Controller driver. so I waana ask how can I have those driver?
I need your help so that I can already use my laptop. thankyou

More replies