Computer Support Forum

Transform Ethernet LAN in to a wireless LAN

Question: Transform Ethernet LAN in to a wireless LAN

Hi guys,

In my office we have a windows server, 10 pc's and 3 printers. All devices are interconnected through a wired network. We have some business applications installed on the server and set up them to launch from client computers. As we are going to move to a new office space we have an intention to say goodbye to the wired network and make everything wireless. My question is will we be able to launch the programs which have being installed on server from client computers via wifi?

Thank you.

Relevance 100%
Preferred Solution: Transform Ethernet LAN in to a wireless LAN

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Transform Ethernet LAN in to a wireless LAN

8 more replies
Relevance 51.25%

if its even possible. I have a laptop with wifi and it also has a ethernet port on it, could I be connected to the internet via wifi and then send that internet out of the laptop's ethernet port to another device to give that device internet?
 

Answer:convert ethernet port on laptop to wireless ethernet bridge

yeah, it's called Internet Connection Sharing if you're running windows.
Posted via [H] Mobile Device
 

19 more replies
Relevance 47.97%

Are you guys aware of a single pci card that offers the typical ethernet connection as well as a wireless one? I'd like to have the option to connect to either and I don't want to get two seperate cards. Any info is appreciated, Thanks
 

Answer:10/100 Ethernet/Wireless Ethernet PCI combo

I don't think you can do that but I would go wireless. :bounce:
 

1 more replies
Relevance 46.74%

Hi, I currently connect to the internet through a wired ethernet port in the wall which connects to my university's network.

I want to make this wireless since I bought a new macbook and was wondering if this product would do it? http://www.amazon.co.uk/dp/B006PYGWG6

I don't know much about it but I was concerned because the Router Mode says 'cable connection only' and I'm not sure the connection is cable (is it ADSL?). Will I need anything else like a modem?

Any advice?
 

Answer:Making an ethernet university connection wireless with TP-LINK Wireless Travel Router

6 more replies
Relevance 45.92%

Hi,


I am trying to get the empty values using Iff statement with Transform statement in VBA. But I can't. Here is my code.

TRANSFORM Sum(qryuserskillsfull.blnLineEndorsed) AS SumOfblnLineEndorsed
SELECT qryuserskillsfull.strFirstName, qryuserskillsfull.strLastName, qryuserskillsfull.strSPNumber
FROM qryuserskillsfull
WHERE (((qryuserskillsfull.blnLineEndorsed) In (NULL,'0','-1')))
GROUP BY qryuserskillsfull.strFirstName, qryuserskillsfull.strLastName, qryuserskillsfull.strSPNumber
PIVOT IIf([blnLineEndorsed]='0',"SA",(IIf([blnlineEndorsed] = ' ',"nu","LE"))) In ("SA","LE","nu");

I cant retrieve the null/blank/empty values. Can anyone help me in this.
 

Answer:VBA Transform-IIF statement help

Post this in the news groups, you have a much better change of getting a reply of a seasoned pro .
 

3 more replies
Relevance 45.92%
Question: Transform (path)

Can anyone tell me what is a "transform" as in "transform path"?
 

More replies
Relevance 45.92%

how i can transform a vts to see over a xvid dvd?i have a vts folder,when i burn them with nero or clone dvd i cant see on one of my two dvds.i believe one dvd is for divx movies the other is for xvid movies.i have on my pc all the codecs including xvid and divx.thanks for the attention.
 

More replies
Relevance 45.92%

The wireless router's signal in my home is unable to reach the third floor of the house, which is incredibly frustrating. There is no option to move it to a more centralized location nor have the service provider technicians been able to provide any assistance in resolving the issue. I have recently become aware that there may be a way to turn my PC into a wireless router, which, when located on the second floor, would then boost the signal so that wireless devices could operate on the top floor without interruption.

Any comments, advice, and/or suggestions would be most appreciated in resolving this matter. Thank you.
 

Answer:Transform PC into Router?

6 more replies
Relevance 45.1%

i have windows xp home edition.using the net i only surf the web
and email. when i go to start-all programs-accessories-system
tools-file transfer and settings and choose settings. is that the same
as the registry for what i do on the net. thank you.

malcolm carr
 

Answer:file transform and setting

Hi,

No, that feature allows you to copy the Windows XP settings over to another computer, like if you purchased a new machine, and want to transfer files and settings to that new one from your old one. The settings are little customizations you may make, things you turn off or on or add as time goes by.
Windows XP is very into customizing....

Are you needing to use the Files and Settings Transfer Wizard, to move things to a new computer?

I am not quite clear about what you want to do, is it something to do with clearing temporary Internet files?

Or clearing the History of where you went on the Internet?

Or, do you mean settings for Internet Explorer, like Security, Cookies, etc?
 

1 more replies
Relevance 45.1%

A few days ago I bought th game No one lives forever 2.
It installed correctly,but when I ran the game this error appeard on the screen:

Error initializing rederer,Your graphic card must support TnL.(or sth. like this)

I don't care about the gme anymore(I sent it back)
But now I'm interested in knowing what is Hardware TnL really is?

Note:My VGA is a RADEON 7000/RADEON VE with 64mb ram
 

Answer:What is hdware TnL(Transform & Lighting)

A graphics card that supports Transform & Lighting, allows games supporting T&L to be displayed at there upmost quality. It renders the game with detail rich graphics, allowing for the creation of beautiful scenes, objects, textures etc.
As far as I know, (correct me if i'm wrong), nVidia introduced T&L it with it's Geforce line of cards, right back with the Geforce 256 'bout 2 years ago.
As for whether your card supports it, well this link doesn't show it anyway. http://www.ati.com/products/pc/radeon7000/
Hope this helped.
 

2 more replies
Relevance 45.1%

hi, I was installing nero 8 in win 10 and my Lenovo yoga 900 shut down and restarted. after that I tried to reinstall nero but it said that : error applying transforms . verify that the transform paths are valid. what does it mean and can it be fixed? i
then installed nero 10 because i was told that it was compatible with win 10 but then it said : pending reboot validator.
how can it be fixed? please help....

More replies
Relevance 45.1%

There is a pc game which I would like to play on my desktop, but when starting the game, i'm told that I need Hardware Transform and Lighting to play the game. What kind of graphics card would be best to pick up to play this game (best bang for the buck). Thanks!
 

Answer:Hardware Transform and Lighting (T&L)

wusaga said:

There is a pc game which I would like to play on my desktop, but when starting the game, i'm told that I need Hardware Transform and Lighting to play the game. What kind of graphics card would be best to pick up to play this game (best bang for the buck). Thanks!Click to expand...

Hi wusaga
For the hardware boys to recomend a video card for your system,they will need to know your pc speck as the video card will need to be assest with what your system will run.
Good luck,
Rex
 

3 more replies
Relevance 45.1%

TRYING TO LOAD NERO PUT CD IN DRIVE THEN CLICKING SETUP OPENS WINDOWS INSTALLER OK THEN A WINDOWS INSTALLER COMES UP VERIFY TRANFORM PATHS BUT HOW DO VERIFY THE PATHS FROM MSI INSTALLER MY FLOPPY DRIVE MAKES NOISE AFTER INSTALLER OPENS MAKING ME THINK THE PATH SHOULD BE TO CD ROM NOT FLOPPY OR I COULD BE WRONG GOT IT WRONG AGAIN DAD .ANY HELP WOULD BE MOST HELPFUL IV LOADED THE CD BEFORE NO PROPLEMS I AM LOST WITHOUT NERO PLEASE HELP
 

Answer:Transform Path Verify

When it asked for the installer, does it give a filename for it? If so, you can run regedit, do a search for the filename, then delete the reference to the filename, and reinstall it..

Back up your registry first..
 

3 more replies
Relevance 45.1%

Hello,
Why is that in IE 10 when I open a XML file that has a reference to an XSL file (to perform a self-transformation on the XML file), the transformed XML output doesn't render as XML output with the "tags", but instead, it displays the node's data
content as raw text?
I've used older versions of IE to see the resulting (transformed) XML output (that was years ago... maybe it was 8?) and this was working. Am I missing anything? Is it an IE10 issue? What version works?

Thanks in advance,

Rick

More replies
Relevance 45.1%

http://www.freewarefiles.com/program_2_219_17682.html

Thats what i downloaded and its sweet. The boot screen has more color than completely black. The appearance is just great.

Answer:transform xp to vista for free

This is junk. Try to remove the program. It messes with your system so bad that if you dont like it and try to remove it you have to format and re-install.

9 more replies
Relevance 45.1%

hi everyone today i would like to share a little windows 8 transformation pack for you guys who do not want to reinstall windows 8 until final release. i love it

Download Windows 8 Transformation Pack 2.0 Free - Bring to your desktop the look of Microsoft's Windows 8 operating system - Softpedia

Answer:Windows 7 transform pack

here is just my destop and i did not install the metro ui so its for you guys to try


personally i dont like the folders but the rest is great

1 more replies
Relevance 45.1%

Im in the market to buy a new laptop. I want to make sure my graphics card has the Hardware Transform and Lighting on it. How do I find out? Im looking at a laptop with an AMD M880G with ATI Mobility Radeon HD 420 and I cannot find any information on weather this card has HW T&L. Can anyone help?
 

Answer:Hardware transform and lighting

Hardware transform and lighting is something that has been around for ages. This is just a guess, but I don't think you could find a current graphics solution that doesn't have it.

I'm guessing that you want to know this in conjunction with the ability to game with the machine...? Or perhaps Photoshop? In either case you will likely be disappointed with the onboard video, hardware T & L or not.
 

1 more replies
Relevance 44.69%

I recently bought a new computer with Windows Vista (Only to discover Windows 7 is about to come out!!) and installed my favorite game from my old computer - Star Wars Battlefront 1.

I had no problems running it for the first month. No lag, highest dettings.
Then I think it was when I installed Direct X SDK that things went pair-shaped.
First it said it didn't detect TnL support, and every time a play the framerate is about 4 fps. It never buggs me about my TnL support anymore thoug.

I have a Intel(R) GMA 3100 Integrated Graphics chip.

I did some research and fount that this chip DOES have TnL, but many old games don't recognise it.
I uninstalled Direct X SDK, but it's still as bad.

Why did it work before, and not now?

Thanks
 

Answer:Starwars Battlefront 1 Transform and Lighting

Things to try:
1. Restart the computer and then try the game
2. Do a System Restore to a point at which the system was fine
3. Don't download any more DirectX SDK's, or any DirectX, unless you actually are told that you need it; If a game says you need a higher version, then the game will probably provide it on the game's disks. If not, you can download it also from Microsoft's site, but make sure you get the right version. But if a game says you need 9 or a lower number, don't install it if you already have 10 or higher--that game doesn't know about version 10+. To check your DirectX version, just search for "dxdiag" from the Start Menu, and somewhere in there it should tell you which version it is.
 

2 more replies
Relevance 44.69%

I ran a check on Canurunit.com for Americas Army cause I really wanna play that game, but I passed on everything cept

ideo HW Transform & Lighting: Required Yes-You have-No
Way to turn on my Video HW Transform & Lighting?

Or do I have to upgrade, which is impossible..since i have a laptop...
 

Answer:Video HW Transform & Lighting: Required

I'm afraid if your Video Card does not have it then you most likely won't be-able to play it.

Some programmers will allow it to play sometimes......but if it won't play then your out of luck.

Installing different drivers won't help.
 

3 more replies
Relevance 44.69%

Anyone know? I tried Windows Character Map but couldn't find it there.
 

Answer:Laplace Transform Symbol in MS Word?

The styleized ell, you mean? Like in this MathWorld article?

I think you're going to have to find your own font for that. There's no Unicode character designation for it, so you'll need a custom dingbats or symbols font that happens to have it.

Curiously, the fonts Mathematica installs don't include it.
 

4 more replies
Relevance 44.69%

I have been contending with this issue for as long as I have had Windows 10. It has become a real annoyance in 2 years. Windows has always had ridiculously long paths to user accounts. I am the ONLY one who uses this computer, to the point where I do not even use a password at Startup. I do NOT need any of this!They remedied that in Windows 10, but when I set up Windows 10 I did not realize this. Consequently, when Explorer comes up, the left sidebar always features "This PC". So to get to my User Acct, I always have to go through the same old ritual: C>Windows>Users>Etc. The older I get, the more of a pain this is. I have fixed it so that a shortcut to the folder of all my own Docs resides on the Taskbar, making it somewhat easier. But there are more and more times when I have to navigate the LONG way when I am uploading to a browser, etc.There MUST be a way to transfer all of my files to THIS PC, or to access MY PC and point THIS PC in my direction. I just do not know it. I am sole user and Administrator of this computer, so this should be somehow possible??Any info greatly appreciated.

TIA

More replies
Relevance 44.69%

Whenever I try to reinstall or uninstall, it says "error applying transforms. Verify that the specified transform paths are valid."

Whats going on?
 

More replies
Relevance 44.69%

I would like to transform my picture files (JPEG) in the HTML form, so I can encrypt them so people won't be able to right-click on my pictures to copy them.

Can you tell me if it can be done and how?

Thank you
 

Answer:How to transform a JPEG file into HTML?

JPEG is an image, you can't just convert it to a text format like HTML. And any image you put online can be copied, no matter what format you put it in.
 

2 more replies
Relevance 44.69%

https://www.maketecheasier.com/transform-windows-7-to-10/?utm_source=newsletter&utm_medium=email&utm_campaign=25072015

Answer:Want windows 10?..without the 'hassle'?..transform from win7 or 8

     

2 more replies
Relevance 44.28%

I installed a palm tungsten on my IBM T30 with XP. I had a bluetooth problem and decided to remove the palm s/w and do a re-install. Windows installer complained of error with transform and paths. I contacted palm who suggested, I remove all palm s/w and folders from program files and palm folders from the registery. I did this. In the program remove folder my palm software is still indicated but with no 'remove' button. When i try to remove/install from the cd, MSI installer complains of transform path error. I switched on the MSI logging option and get a 2203 error. I can do a msiexec force install or deinstall but keep on getting the transform path error. There is no MST file on the CD, I am at my wits end, short of a new XP install i dont know what to do. any ideas from the experts?

Answer:Install /uninstall MSI transform path error

click here and get Power Tools and see if there are any Palm registry entries left.Do you have a full xp cd or a Recovery Disk?

4 more replies
Relevance 44.28%

Hello Lenovo Community! I've decided to give a big FU to consumerism and upgrade my VERY OLD Lenovo IdeaPad U160 bought wayyyy back in 2010. Since I've been consuming the internet and not contributing to it for a long time, I'll start by documenting my upgrade trials here. Please chime in (and answer a few questions) along the way! Here's what I'd like to upgrade and the replacement components:1. Storage: 500 GB HD to 500 GB SSD -- $150 -- Samsung EVO 2.5" 500GB SSD (via The Wirecutter recommendation)2. Memory: 4 GB RAM to 8 GB RAM -- $38 -- Crucial 8GB Kit (2 x 4GB) DDR3L-1600 SODIMM : CT5305724 (via this other thread)3. Battery -- ~$40 -- TBD4. WiFi Card -- ~$35 -- TBD Couple questions for the community:1. Any recommendations on how/what software to use for backing-up and transferring data on the HD to a new SSD?2. Anyone have experience upgrading a IdeaPad U160?3. Is the WiFi Card on the IdeaPad U160 replaceable/ugradeable?4. Any recommendations on battery replacement brands? RAM replacement is in en route! I'll update soon with how the installation went! Thanks!!

More replies
Relevance 44.28%

Using Access 2003....

Hello, I am aware that one can export a query to xml with xsl transform by navigating the menu selections but would it be possible to reduce this to one step for the end user by automating the exporting of a query to xml with xsl transform via vba code? If so, what would this code look like? Thanks!
 

Answer:Solved: Access VBA export query to xml with xsl transform

Nevermind, I found a solution here: http://www.oreillynet.com/xml/blog/2005/04/transforming_xml_in_microsoft.html
 

1 more replies
Relevance 44.28%

Is there any tool available that can read a Favorites folder contents (Win98) containing only shortcuts to Web pages and produce a single Web page with only the URLs in text form?

Thanks,

-- Tom
 

Answer:(Solved) Tool to transform shortcut to hyperlink?

If we're talking about internet Explorer...

If you export your favorites (File > Import and Export...) i believe it makes a giant html file of the URLs. That's just how it stores 'em. You might have to edit it a little to make it... pretty.
 

3 more replies
Relevance 44.28%

How to transform your laptop into a gaming powerhouse with an external graphics card






That?s when it hit me: ?Hey, you can have an external hard drive, why not an external graphics card? Surely somebody?s done that.?








The good news is that many people who go the DIY route end up with a plug-and-play experience requiring little to no modification?but to get to the plug-and-play part, you?ve got to do your research.

When that?s done, however, you?ll be left with a killer console-toppling PC gaming setup?all for a cheaper price than a new Xbox One, depending on which graphics card you choose.



How to use an external graphics card with a laptop

More replies
Relevance 43.87%

Hi All,

My Access DB is around 1.9GB now, and there is only 1 big table which makes up most of the 1.9GB. We do have SQL Server at work, only issue is that the queries that run on this table are Transform ... Pivot queries and these do not work in SQL Server.

I thought perhaps I could split this table into multiple Access DBs but not sure how to link it all back together? Has anyone done this, or is there another method. The result of the queries are cut and paste into Excel, and these have already been set up to work with the data in the pivot format.

Thanks!
 

More replies
Relevance 43.87%

If you are using Windows XP but want to enjoy the “Mac Os Leopard” then this tutorial will sure help you.
Please Note: Using any type of Transformation Packs available on net can Slow Down your PC, So its Better for you to Use the below Tutorial if you want “Mac Os Leopard” Look-a-Like in XP without slowing your PC. Below is a list of things which are going to change after in this tutorial: Leopard Visual Style / Windows Blinds IconsBoot ScreenCursors About Leopard Dialog Box Shutdown Dialog BoxLeopard Firefox Skin Leopard Styler Leopard System Properties WallpapersLeopard Logon Screen Few other Changes… 1. Leopard Visual Style / Windows BlindsYou can get the same look in Windows XP by using following theme: Firefox Preview without any Theme: Credits: NobodyUse & Me.. Download “Mac Os Leopard Theme” for Windows XP (Repacked by Me) Download Tiger 2 Windows Blinds Theme for Windows XP Download Leopard Windows Blinds Theme for Windows XP 2. Leopard IconsYou can use following icon pack to install them in XP: Icon Package for TuneUp Utilities: Icon package for “IconPackager”: Credits: Anoos for Icon Pack of TuneUp utilities MrEyePatch for Icon Pack of Iconpackager Download Icon Pack for TuneUp utilities | Mirror Download Download Icon Pack for Iconpackager | Mirror Download 3. Boot ScreenYou can get a similar boot screen in Windows XP: Boot Screen 1: Boot Screen 2: Boot Screen 3: Dow... Read more

Answer:[Tutorial] -Transform Windows XP into Mac Os Leopard without using Customization Pack

10. Leopard Wallpapers You can get a similar Leopard Wallpapers in Windows XP: Click here to Download the Above Wallpapers 11. Logon Screen You can get a similar ?Leopard Logon Screen? in Windows XP: Download Leopard logon Screen for Windows XP 12. Few other Changes?(1). OS X Leopard for Rocketdock=> Credits: WhiteRaven92 Download RocketDock Software from Here Download RocketDock theme (leopard) for XP | Mirror (2). Finderbar for XP=>
Add Mac OS X Style drop-down menus to your Windows Taskbar Download Finderbar Drop-Down menus software from here (3). leopard Sounds=> Download leopard Sounds from here
That?s all for now. After following all the above steps, you will get Mac Os Leopard Look & Feel in Windows XP. NOTE: About Leopard Dialog Box, Shutdown Dialog Box, Leopard System Properties & All 3 Boot Screen were personally created by me!!
Waiting for your Responses!!! Source: http://www.rajeshpatel.net/transform...mization-pack/

2 more replies
Relevance 43.87%

How to create a windows transform installer package .mst file

Answer:How to create a windows transform installer package .mst file

As I understand this, the .mst is applicable to a Office XP installation. Are you using XP?

Does this help- How To Create a Universally Applicable Transform

4 more replies
Relevance 43.46%

NOTE=> This Tutorial is created for Windows XP users, who wants to transform their Windows XP into Linux ubuntu! So please Do not comment below that Ubuntu is Available for free, Why Not install ubuntu Like that.... Source: Transform Windows XP into Linux Ubuntu without using Customization Pack
If you are using Windows XP but want to enjoy the Linux Ubuntu look, then this tutorial will help you.
After following this tutorial, you will get the same Linux Ubuntu look in your Windows XP. Below is a list of things which are going to change after in this tutorial: Linux Visual StyleIconsBoot Screen CursorsAbout Ubuntu Dialog BoxShutdown Dialog BoxUbuntu Firefox SkinUbuntu StylerUbuntu System PropertiesWallpapersUbuntu Logon Screen Few other Changes? 1. Linux Visual StyleYou can get the same look in Windows XP by using following theme: Credits: FioreSSj Download Linux Ubuntu Theme for Windows XP(Repacked by Me) 2. Linux IconsYou can use following icon pack to install them in XP: How to Install Ubuntu icons? Run ?IconTweaker and install. Then simply run IconTweaker from the start menu and drag ?Ubuntu Icontweaker Theme? into the window. * IconTweaker Software Already provided in the Folder! Credits: Dobee Download Linux Ubuntu icon pack for XP 3. Boot ScreenYou can get a similar boot screen in Windows XP: How to Install Boot Skin?
There are two alternative methods to Install Ubuntu Boot Screen on Windows XP i.e. TuneUp Utilities & Boot Skin Installe... Read more

Answer:[Tutorial] - Transform Your Windows XP into Linux Ubuntu without Customization Pack!

11. Ubuntu Logon ScreenYou can get a similar Ubuntu Logon Screen in Windows XP: Credit: Lustmusket3000 Download Ubuntu Logon Screen For XP 12. Few other Changes?(A). Window Previews How to Install Windows Preview? Just Install Visual Task Tips.exe & restart your PC for Taking Effect. Download Windows Previews Software From here (B). 3D Effect How to Install?
Place this folder i.e ?Yod?m 3D? anywhere and run ?Yodm3D?. Configure to your liking. Download 3D Effect Software for XP (C). Clear Looks for XP Credits: Schmoove Download Clear Looks Software for XP End, After following all the above steps, you will get Linux Ubuntu Look & Feel in Windows XP. Source: Transform Windows XP into Linux Ubuntu without using Customization Pack NOTE=> This Tutorial is created for Windows XP users, who wants to transform their Windows XP into Linux ubuntu! So please Do not comment below that Ubuntu is Available for free, Why Not install ubuntu Like that....

2 more replies
Relevance 43.46%

please help me when i am trying to installing a game getting the following error
please tell me wt to do !

Answer:[SOLVED] Error applying transforms. Verify that the specified transform paths are val

Hi,

what game are you trying to install and what are you computer specifications i.e make and model, memory, etc

Steve

11 more replies
Relevance 42.64%

I've been searching all day and I can't seem to figure out how to install these features. I'm 99% sure that this card has those features on it, but I can't figure out how to access them.

Just lookin' for some help, please.
 

Answer:Intel 82915G/GV/82910GL, Vertex Shader? Video HW Transform & Lighting?

Sorry but the onboard gfx controller from Intel doesnt have HW T&L
http://support.intel.com/support/graphics/sb/CS-011910.htm

dependent on game and if that game specifically checks for actual Graphics Card supported T&L the game will not run or run correctly.
 

1 more replies
Relevance 42.23%

So I just bought myself a new laptop (hp dv6910us) and I'm enjoying it thoroughly but I have a very basic question about what to use in terms of internet. In my apartment, I can easily connect to the internet through my ethernet connection or through the wireless. Both are smooth, fast connections. In terms of increasing the lifespan and battery-life of the computer, should I stick primarily to connecting through the ethernet or through my wireless connection? I have an Atheros AR5007 802.11 b/g WiFi adaptor and my processor is an AMD Turion X-2 TL-60 2Ghz with 3.00GB RAM. Running windows vista 32 Bit. It's a general question, not a pressing issue so answer at your leisure. Thanks.
 

Answer:Wireless vs. Ethernet

Not sure if anyone has ever bench marked something like that. But my gut feeling is that the wireless would draw a little bit more power but I have no evidence to back that up.
 

3 more replies
Relevance 42.23%

I just installed a wireless card. but i want the Ethernet to have priority over Wirless how can i do that?

Answer:Ethernet and Wireless

It should do it automatically when an ethernet cable is plugged in.

9 more replies
Relevance 42.23%

Is there such a thing as a 5 Ghz Ethernet card, or is just 5 Ghz wireless?

Answer:Ethernet vs. wireless

No - 2.4/5 GHZ refer to the wireless frequency.

Ethernet comes in two speeds mostly - older 100 Mb/s (100 megabits) or more modern 1000 Mb/s (1 Gigabit). Of course, these are usually much faster than internet speeds even for slower 100 Mb/s unless you have amazingly fast broadband.

1 more replies
Relevance 42.23%

i have got a [email protected] G-Gateway which plugs into the back of desktop pc through the ethernet socket. i also have a laptop that has a wireless card built in it.i have set it up so i can run BB on my laptop through the gateway and also my desktop can access BB because of the ethernet cable. My desktop doesnt have wireless card.I wanted to know if i can get the two pc's to see each other on a network, this is so if my laptop is being used inanother room they can see what i am doing on my pc and vice versa and i could also swap files between the two of them. I have tried to set up a network using the XP wizzard but it says that a network cable is disconnected from my laptop so it wont connect to my pc. i know that it is disconnected cos i want to use the gateway to talk to my pc through the wireless.can anyone help please?

Answer:ethernet and wireless together

You might get a better response by posting this thread in the Networking forum!If I understand you correctly your set up should allow you to Network in the way you want. You'll need to make sure the Desktop and Laptop are connected to the same Network - i.e they are on the same named network. Run the Network wizard on your desktop and note the exact names you enter, then select 'make disk' option at the end and place the disk (could be a USB Stick) in the Laptop and run the file created by the Desktop. You will have needed to select File/Printer Sharing when you first ran the Wizard.If you go 'Show all connections' and right click on the LAN card you can select 'Properties' - this tells you the protocols you have active (Client for MS Networking, File/Printer Sharing, TCP/IP).Finally check which files you have set for 'sharing'. Never share a whole drive on a WiFi network!Good luck!

2 more replies
Relevance 42.23%

Simple question,

I have a Wireless network in my house, in my garage i have a workroom, with a 5port hub and no wireless cards. If I buy a wireless bridge, can i plug it into the hub and bind it to my network, to allow computers to be plugged into the hub and get an IP?

So in essense want to take a wireless source and convert it back to ethernet in a specific location
 

Answer:Wireless to Ethernet

I believe so. I have looked into doing this in my living room for my ReplayTV and future media server.


PS: You bastard
"The Car: 2002 Porche 911 Conv. ; PES Tuning ECU ; Brembro Grand Turismo Brake Kit "
 

7 more replies
Relevance 42.23%

Hello,

I have a PC with wireless connection to the Internet (PCI wireless card). Is it somehow possible to use the Ethernet port (NIC) to PROVIDE network access to a device? (such as a D-Link internet camera with ethernet connection).

Thanks for your help!

Johnathon
 

Answer:One wireless, one Ethernet, can I use both?

11 more replies
Relevance 42.23%

Hi there,
I'm having troubles with our new router. I can connect via ethernet but not through wireless. I'm certain it's an issue with my laptop, as I've managed to connect several other devices without any problems. Any help would be appreciated as I've tried everything I can think of.

Below is the result of "ipconfig /all" with the ethernet cable connected.

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\WYN>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : WYN-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : dlink.com

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : dlink.com
Description . . . . . . . . . . . : Atheros AR5007EG Wireless Network Adapter

Physical Address. . . . . . . . . : 00-21-63-CD-F0-BD
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::d91f:81b7:31ff:4ac1%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.3(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 01 August 2012 10:36:26
Lease Expires . . . . . . . . . . : 02 August 2012 10:42:13
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . :... Read more

Answer:Ethernet Yes, Wireless No?

------------------------------------------------------------------------
Atheros Wireless Adapter - AR5007EG & AR5007
Over the last couple of years we have been seeing a lot of problems with the above adapters, mainly concerning WPA and WPA2 encryption and mainly on windows Vista.
We have seen just a couple of issues on other windows operating system, windows XP and windows 7.

Windows XP:- A driver update has resolved the issue
Windows 7 :- No conclusive results for a fix

The wireless adapter gets an IP configuration, and shows as connected, but communication is non-existent or sporadic.

Log into the Router and disable the wireless security and see if you are now able to connect to the internet and surf OK.
Please post back a reply here, and let us know if that works or does not work.
If you post back the make and exact model of the router - we can advise how to disable the wireless security

Here are a number of possible solutions

--- 1) In Device Manager right click on the wireless adapter and "update driver."

--- 2) Download and install the latest wireless driver from your laptop manufacturer's web site support section,

If you post a reply here with the Make and EXACT model of your PC, along with the windows version you are running. we will see if we can find a link to the driver and will post a reply with the link here.

--- 3) On one occasion re-setting the router back to factory default and re-configuring the router settings has resolved t... Read more

3 more replies
Relevance 42.23%

Hi, I have a Pavillion dv7-1129 wm laptop. With Windows Vista Home Premium ... Amd Turion (tm) X2 dual-core moble Rm-72 2.10 GHZ...Ram-2814... 32-bit Operating sytem
Can anyone provide me with the drivers for the Wireless and Ethernet connections

Drives for a Realtek RTL8101 Family-PCI -E Fast Ethernet NIC (NDIS 6.0)

Thankyou
 

Answer:Ethernet and wireless

12 more replies
Relevance 42.23%

I am with o2 and use their wireless router. I have used it wirelessly for the last three years because it was too far away from my computer. I use Windows 7 Home Premium 64bit and the internet connection strength at the bottom of the screen shows up to three bars (normally only two).
This morning I managed to connect to the router using a 5 metre ethernet cable and the strength has gone up to four bars.
I can't see the difference. A speed test shows the same speeds 2.6 down 0.7 up.
Would I be just as well off being wireless? What difference does the strength from two bars to four bars make?
I would appreciate your comments please.

Answer:Wireless or Ethernet

Interesting reading here enter link description here

6 more replies
Relevance 42.23%

This is, perhaps, an extremely silly question, easy to answer as the Techguy says! I have been using a desktop with Ethernet LAN (Landline) for years. Now, I have a Dell Studio 15 Laptop with Wireless output signal. My question is, How do I connect the two, so that I can use the Laptop too through my land-line broadband connection? Do I use just a wireless router in between? Any type of Wireless Router, or, any specific type? Do I need to change anything in my desktop LAN setup?
 

Answer:Wireless to Ethernet LAN

6 more replies
Relevance 42.23%

The office setup is wireless. When the printer throws a wobbly we're stuck until the support chap arrives. (They're good but busy.) There is an old Xerox machine which is not connected to the PC and is used for copying only. I checked the manual for this printer, online, and the connection to the PC is given as enthernet. I don't suppose it's as easy as plugging in an ethernet cable. Is it possible to connect this printer and use it in a wireless setup?

Answer:Wireless and ethernet

Depends on the model of the Xerox, the operating system and availability of drivers. I suspect that you may be able to connect it to the router by ethernet (not to the pc) and then use it. Are you sure that it is ethernet to pc?

6 more replies
Relevance 42.23%

Hello,

I have a PC with wireless connection to the Internet (PCI wireless card). Is it somehow possible to use the Ethernet port (NIC) to PROVIDE network access to a device? (such as a D-Link internet camera with ethernet connection).

Thanks for your help!

Johnathon
 

Answer:One wireless, one Ethernet, can I use both?

Using Client OS (I.e. Not a real server like Windows 2008) you cannot use two Network Cards (does not matter wire or wireless) that are connected to the same Network (I.e. same Wireless Router/switch etc.).

You can use both only if they are configured to two subnets (Two independent Networks).
 

2 more replies
Relevance 42.23%

Hey all im new here, and this is my first post.
First of all I have a DSL connection through my provider. I then have a NetGear FM114P wireless firewall/print server (router ) attached to the modem.

My computer is currently hardwired through the ethernet port in the FM114P router with two other computers connecting by WiFi.

What i was thinking, was loosing the ethernet cord and turning this computer in to a wireless connection like the other two, but if i do will i loose speed? This computer currently gets between 700-950 kbps., depending on traffic.

thanks
mausie
AKA foufymaus
 

Answer:Ethernet -vs- Wireless

9 more replies
Relevance 42.23%

Hi everyone

I dont really know whether this is really relevent, but I was just wondering. If I have both ethernet cable and wireless on one computer as 2 networks. Can I join up both of them to increase my internet speed or somthing. I tested both of them seperately and the ethernet cable was much faster than the wireless. My router is next to my computer. Can I have some tips. I will be putting some screenshots later.

Thanks in advance

Answer:What can you do with both ethernet and wireless??

  
Quote: Originally Posted by mw2


I tested both of them seperately and the ethernet cable was much faster than the wireless.


Surprise, surprise...

9 more replies
Relevance 42.23%

I've just moved into my Halls at uni in London. We have to use a CAT 5E ethernet cable to connect to a socket in the wall. When we open a web browser we have to enter a username and password to be able to go online. I was wondering if there is any bit of Hardware which i could plug into the ethernet wall socket which would then broadcast that ethernet connection as wireless and if so if it is possible to protect the connection so others cant use the WIFI.

thanks
 

Answer:Ethernet to Wireless, is this possible?

When we open a web browser we have to enter a username and password to be able to go online.Click to expand...

That probably means that they want to restrict usage to one computer per connection and do not want wireless networks set up. So, please check with the IT department before doing anything, as it's not very hard for them to detect violations.

On the assumption that you will not attempt this unless it falls within the rules, you can use a Wireless Access Point (WAP). Use encryption, preferably WPA2-PSK, AES, but at least WPA-PSK, TKIP. Use a passphrase that cannot be guessed and does not include dictionary words.
 

1 more replies
Relevance 42.23%

My BT HomeHub is in the same room as my PC and I have a wireless card.
I can also connect my PC to he hub using an ethernet cable. Which is preferable, also would one allow faster downloads over theother.

Answer:Ethernet Vs Wireless

A wired ethernet connection will always be more reliable than a wireless connection. In terms of speed, this is likely to be most significant in a Local Area Network where files are transferred between computers.
As far as the internet is concerned, unless you have a broadband connection of about 50Mbps, your connection from the computer to the router will always be much faster than your download internet connection, so wired or wireless makes little difference. Having said that, if you are running more than one computer "wirelessly", the available bandwidth is shared by them, unlike wired connections where each will have the full speed of the router's network switch, usually 100Mbps.

1 more replies
Relevance 42.23%

Is there such a thing as a 5 Ghz Ethernet card, or is just 5 Ghz wireless?

Answer:Ethernet vs. wireless

No - 2.4/5 GHZ refer to the wireless frequency.

Ethernet comes in two speeds mostly - older 100 Mb/s (100 megabits) or more modern 1000 Mb/s (1 Gigabit). Of course, these are usually much faster than internet speeds even for slower 100 Mb/s unless you have amazingly fast broadband.

1 more replies
Relevance 42.23%

My local vet's PC uses the ethernet port to connect to Vetcomm through a router. Until now, normal internet access has been through dial-up. He now has broadband. I fitted a wireless USB adaptor which installed OK, but won't connect to his new BT router - it shows as 'disabled' and won't let me change to enabled.
I'm sure it's a settings issue, but never had to deal with a similar situation to this.
Grateful for any thoughts.

Answer:Ethernet OK, but no wireless

I believe that you have to enter the configuration pages of the Home Hub to enable the wireless.
This article should guide you through it.
This article explains how to log onto the Home Hub.

10 more replies
Relevance 42.23%

I need to know if this can be done. The situation:
Desktop has a integrated 10/100/1000 ethernet port.
-Apartment the owner lives in has Free Wifi for all residents.
-Desktop has no room for wireless card, is under warranty, and owner doesn't want to crack the case.


Is there a device that can be used to plug into the Ethernet - to a "hub" of sorts, to transmit wirelessly to get the free Wifi signal? (so internet browsing is possible upon this particular PC without voiding warrenty or paying for seperate net...)


if so... link examples or provide exact names. I am getting mixed results with Google.

I know some USB wireless devices are available for this - but those can get pricey, and the owners don't really have any open USB (so a hub would be needed on top of it... which is more money and probably more expensive in the long run.)

Answer:Ethernet to Wireless...

USB wi-fi would be the easiest and cheapest solution. Otherwise you would have to run an ethernet cable from your computer to the source router or a router picking up the signal - which doesn't sound like an option either.

Do you really not have ANY free USB ports?

3 more replies
Relevance 42.23%

I have a Linksys BEFW11S4 4 port wireless broadband router with 2 x wireless laptops that can see each other and share files fine. I also have a PC which is hardwired to the router. All 3 machines have an IP address from the range I configured and all 3 machines can access the internet. The problem I'm having is that my hardwired PC cannot see the workgroup I have set up so therefore it can't see the 2 wireless laptops. The 2 wireless laptops can see the hardwired PC but cannot connect to it to view the shared folders.

I have switched all firewalls off, changed lots of config in the router, reset it to default, rebuilt my hardwired PC, pulled out some hair, changed network settings all over the place but just cannot get the hardwired PC to see the workgroup.

Any suggestions anyone ! !
 

Answer:! ! ! ! ! Ethernet Can't See Wireless ! ! ! ! !

Well, as long as all three are getting DHCP addresses from the same network, then the router isn't to blame, so, get it configured and leave it alone.

You say you've setup a workgroup for the laptops. That desktop machine also needs to be a part of that same workgroup. Then, you need to have the same username and password combination on the three machines, and then the desktop should be able to share files with the laptops.

And you definitely want the firewalls disabled until you get things working.

-Scott
 

1 more replies
Relevance 42.23%

Hi

My W8 PC is connected to the Wireless Router by Ethernet Cable, the PC also
has Wireless connectivity; is it possible to connect to the Router with both at t
he same time and if I do will that improve internet speed?

Thanks

Daniel

Answer:Ethernet and Wireless

Your internet speed is determined by your provider and the package you have, it is irrelevant how fast your connection to router is as long as it is at least a little faster than speed to the provider. So you can not change the internet speed above what provider gives you.

2 more replies
Relevance 42.23%

hi, i am using a wireless connection but to play bf2142 well i need a wired connection. i have got an ethernet wire going from the wireless router to computer, and it works [i disable the wireless connection and i connect to the web through the wire]. but i want to use my ethernet wire as my PRIMARY way to connect to the internet, but still want the wireless connection active for my computers upstairs to connect to the web.

does this make sense?

is this possible?

thank you

denny
 

Answer:using ethernet instead of wireless???

15 more replies
Relevance 42.23%

A little confusion here - When I log onto my Verizon router page (that 198.xxx thing), I show many menus but the following 2 have me a little confused. One says "network connection" type is: Ethernet - I do have a yellow cable coming out of my Actiontec router to the pc so I get that. Another menu says "wireless settings" and this says "wireless" which I have set to WPA and the mode is 802.11g "only". Is this system wireless or ethernet or both? I would like to do the pc to tv connection for netflix movies at some point.. Am I all set with this configuration? (knowing I have to buy a box of some sort, Roku or Apple or something) and if I do have a wireless connection, can I connect the two without cables running from one to another? Hope that is all clear. Thanks in advance.
 

Answer:Ethernet or wireless?

Is this system wireless or ethernet or bothClick to expand...

both

you have a wireless router - and so you can connect to the router with a cable as you currenty are doing and other devices PCs etc or your PC can also connect with wireless
I would like to do the pc to tv connection for netflix movies at some point..Click to expand...

someone else will need to answer the netflix service

from what I can see on the website
http://www.netflix.com/HowItWorks#faq1
you can watch via a PC


http://www.netflix.com/HowItWorks#faq1
Can I also watch instantly on my PC or Mac?

Yes. Simply press Play on any TV episode or movie to instantly watch it online on your Internet-connected PC or Mac.Click to expand...

so you can watch directly on your PC without any other device - and then if you have your PC video output connected to the TV you should be able to watch on TV via PC

whats the make and model of TV
- what outputs do you have on the PC video card ?
- what inputs do you have on the TV

if you have HDMI on both - then you should be able to use that - although for some copyright materials you will only be able to display on the TV and not two monitors
 

3 more replies
Relevance 42.23%

Hi,I would like to know wether I could change my present USB Wireless connection to the ethernet connection.At present I am on BT Home Hub Box connected with a "2WIRE" USB wireless.All is OK but I find using my webcam my picture freeze's upnow and again and my last word spoken repeats about ten times.I think it might be better to use the ethernet wire as I now have the Home Hub box closer to my P.C. I would like to just change over rather than have to re-engineer the system in case I want to change back,any help would be great.Sam Gee

Answer:Wireless to ethernet

You could just try sticking the ethernet cable in and removing the usb. If it does not work you will have to run the setup cd again. If this cause problems you can always run system restore to put you back where you were.

4 more replies
Relevance 42.23%

In my house i have a desktop computer connected to internet broadband via ethernet cable to a virgin set top box. I have bought a laptop and want to set up a wireless connection for it. If i want to do so, can i continue having my desktop connected via ethernet aswell as a wireless cable router?thanks belta

Answer:set top box wireless and ethernet?

Try getting a 4 port Wireless Cable Router, the sort that gets its input using an ethernet cable (not the more common ADSL Modem Router type)By plugging your existing ethernet cable from the Virgin box into the routers input WAN port then connecting to your desktop from one of the routers output LAN ports using another ethernet patch cable (routers usually come with at least one in the box) after that all you may need do is access the router setup page and turn on the wireless part but the manual will explain how to Cheers HC

1 more replies
Relevance 42.23%

Here's something that is causing massive loss of hair.....

My PC is connected to my router with a wireless card. I also connect my PS2 to my PC using an ethernet connection (the ps2 is "modified" and I use this connection to play music and video thru the ps2 to the TV).

Everything works fine with one exception. It seems like the wireless is not getting a DNS. To obtain one, I have to disable the ethernet card, connect to my AP, then enable the card. If I lose my connect with the AP (which happens sometimes, it's on the other side of the house and the signal is a little weak), then when it reconnects I have to do the whole disable/enable thing.

It's not a huge deal, but I do like my stuff to work properly and usually things like this are not problem for me, but this one really has me wondering. Anyone have any ideas?

Here's my ipconfig /all if that helps. What's odd is the ipconfig is *exactly* the same when I can connect and when I can't. So maybe it's not a DNS issue, but something else. But I am unable to connect to any web sites until I disable and re-enable the ethernet card.

Windows IP Configuration

Host Name . . . . . . . . . . . . : HAL
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : domain.actdsltmp

Ethernet adapter Wireless Network Connection 3:

Connection-specific DNS Su... Read more

Answer:Ethernet and wireless on same PC

6 more replies
Relevance 42.23%

should I enable the wireless when I want to use the ethernet, my wireless works fine, but when I try to connect with ethernet, either no connection or connection drops after a short time, It is a dell desktop with windows xp,with netgear switch, and comcast modem,with mac airport, I need to get my ethernet high speed working that I pay for. PLEASE someone help
 

Answer:ethernet and wireless together

If I am going to use ethernet for an extended time I remove an external wireless adapter or switch an integrated wireless off. But that's to extend the life of the unused component and to save the battery if on battery. If you are using a PCI wireless card with the desktop then disabling it is probably the best you can do. But that is not going to impact your ethernet usage, so it is really your choice.

Please show the following for when you have an ethernet connection and for when it has dropped ...

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

3 more replies
Relevance 42.23%

So my wireless works well and fine, but the only problem is is that it disconnects time from time and i'm trying to download a 15 gb file that has no resuming capabilities. I want to use my ethernet connection rather than my wireless, but the ethernet (local area connection) isn't showing when I go to Control Panel/Network and Sharing Center/Manage Network Connections. I only see Wireless Network Connection. I have a router and a modem. the router is a linksys cisco. And my cable modem is linksys wrt45 or something. How can I fix this? My other two computers are using the ethernet cables fine.

Answer:Wireless but no ethernet

Download and run VistaForums SysInfo Tool (Select All and export to a file) on the laptop you're having trouble with, and upload it.

Ed

4 more replies
Relevance 42.23%

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 8103 Mb
Graphics Card: Intel(R) HD Graphics, -1988 Mb
Hard Drives: C: 465 GB (273 GB Free); E: 5 GB (0 GB Free); F: 143 GB (0 GB Free);
Motherboard: MSI, H67MA-E35 (MS-7680)
Antivirus: Avira Antivirus

I used to access my home wireless with a Netgear N150 Wireless USB adapter. The device still works, because I use it for Roku, but my computer can't access the wireless network with it. As a replacement I installed a TP-Link 300Mbps Wireless N PCI adapter (TL-WN851ND). That hasn't worked from the start. During the course of trying to fix the problem, I changed at least 10 different settings, and none of them worked. Now, I've lost track of all the changes I made. What I want is to erase all of the previous settings and connections and act like my computer is fresh out of the box and has never been connected to the internet before. The TP-Link is what I want to use. Not knowing as much as everyone else on here about computers, I am assuming that the Netgear and TP-Link aren't the problems, and it is instead something with my computer. Is there some type of checklist I can go though step by step to see exactly what the problem is? I don't know if there is physically something wrong with my computer that I can fix by buying a... Read more

More replies
Relevance 42.23%

I'm having problems connecting my PC via ethernet cord to the internet. We just got cable today and one of our PCs has a wireless card, when the other one doesn't. My computer is the basic one with the specs in my profile. It only has a dialup modem. I don't know if I have to configure something to the router or modem, but when my computer is hooked up to the router(the internet still doesn't work then) all other computers on the network won't connect to the internet.

Any help will be appreciated!
 

Answer:Pc not getting wireless through ethernet

16 more replies
Relevance 41.82%

I am currently baffled by the following issue;

OS - Win XP Pro 32bit SP3

Background;

When attempting to install certain packaged software it will fail or in some cases bring up the Windows Installer information window.

We have noticed that it appears to happen when an installer, EXE or MSI relies upon transforming a further extracted MSI with an MST file.

This only occurs if the files are attempted to be extracted to the root of the temp folder. The files are not created hence cannot be run. The Windows Installer information window will appear if you attempt to run msiexec pointing to a file that does not exist.

For example;

When it works, an example>
We run an EXE that is located on the desktop. This then extracts further EXE's (and subfolders) to a folder called, for example, "SFX18C.tmp". Another folder called, for example, "{8907BCE9-6673-4A9A-A24A-892C26294539}", is also created within the TEMP folder which contains various INI files, an MSI and MST file. The installer then runs/transforms this MSI which appears to be named via a selection of random numbers and letters such as "aaetc234.msi & aaetc234.mst" in the root of the TEMP folder. The file size of this msi is exactly the same as the msi located in the {8907BCE9-6673-4A9A-A24A-892C26294539} folder. The installation continues and these files are removed, along with the {8907BCE9-6673-4A9A-A24A-892C26294539} and "SFX18C.tmp" folder.

When it doesn't wor... Read more

Answer:Solved: Local Settings Temp folder and transform issue with build and package install

8 more replies
Relevance 41.82%

Hi. I got a wireless router but it needs to be connected to a modem via an eternet cable. My modem is usb. I have 2 questions:1. Because I am looking for a new broadband provider there is one who provides modems with an ethernet connection or 2. There is any small device or cable that allows a connection between an usb port and an ethernet port?....Thanks

Answer:Wireless router with ethernet but not usb

You will need a new modem - however most ISPs bundle a "free" ADSL modem with their broadband package so if you are going this route look at what's offered in the package

4 more replies
Relevance 41.82%

13 Minutes Ago
Dear all,

I have read all (i think) homegroup topics here but none solved my problem.
Homegroup is working perfectly when both computer are connected to router by ethernet cable.

As soon as i unplug the cable from computer 1. None of the computer is recognizing the homegroup of the other.

I tried rebooting both computers. Leaving homegroup, rebooting create new homegroup >> nothing helps.

Both computer get internet, can connect to the router, both computer can see and share folders with each other via the the network sharing way.

Both ethernet & wireless connection show up as HOME NETWORK

I have executed the Homegroup troubleshooter on both computers No changes.

Any clues on this?

Many thanks!

Fish

Answer:HomeGroup OK via ethernet but NOT via wireless

I believe homegroup is tied to the network connection. Did you create a homegroup for the wireless network connection?

7 more replies
Relevance 41.82%

A friend brought over a computer for me to remove a virus, after checking out the computer found that the OS was hosed. So backed up data, and put a fresh istall of XP pro on the PC, legal copy not bootlegged. Couldn't get ethernet working, figured since he did have a several nasty viruses, I'd flash the BIOS, and right 0's to the drive just to make sure no nasties were still on the machine. All said and done, reinstalled XP Pro, on an Emachine T2862. Installed drivers. Installed a pci 3Com ethernet card, with the right drivers. No ethernet, cant get an IP, tried using a good static IP didn't conect to the internet, couldn't ping the router. Plugged in a Linksys wireless usb adapter, grabbed an IP right away. Tryied plugging the ethernet in, ethernets get IP's now, unplug usb and ethernet stops working. Plugged usb back in did all of the windows updates, including hardware. Tried Ethernet with the new drivers, still doesn't work. Tried Winsock fix, tried XP bat fix. Any other suggestions, I'm stuck.
 

Answer:New install no ethernet, but can get wireless

What patch level of XP are you using? If this is SP2, the classic WINSOCK patch is not correct.

TCP/IP stack repair options for use with Windows XP with SP2.

Start, Run, CMD to open a command prompt:

Reset TCP/IP stack to installation defaults. netsh int ip reset reset.log

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reboot the machine.

Let's also see this:

Start, Run, CMD to open a command prompt:

Type the following command:

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 

2 more replies
Relevance 41.82%

A friend brought over a computer for me to remove a virus, after checking out the computer found that the OS was hosed. So backed up data, and put a fresh istall of XP pro on the PC, legal copy not bootlegged. Couldn't get ethernet working, figured since he did have a several nasty viruses, I'd flash the BIOS, and right 0's to the drive just to make sure no nasties were still on the machine. All said and done, reinstalled XP Pro, on an Emachine T2862. Installed drivers. Installed a pci 3Com ethernet card, with the right drivers. No ethernet, cant get an IP, tried using a good static IP didn't conect to the internet, couldn't ping the router. Plugged in a Linksys wireless usb adapter, grabbed an IP right away. Tryied plugging the ethernet in, ethernets get IP's now, unplug usb and ethernet stops working. Plugged usb back in did all of the windows updates, including hardware. Tried Ethnet with the new drivers, still doesn't work. Tried Winsock fix, tried XP bat fix. Any other suggestions, I'm stuck.
 

Answer:New install no ethernet, but can get wireless

11 more replies
Relevance 41.82%

(Before i start, i have checked multiple threads on this site about my problem but none atm have seemed to work, im sorry if this topic arrises constantly but i have done a search but my problem still presists.)

Hi,

My problem has been going on roughly since i aquired the laptop but im sure that it isn't a hardware fault as it is both the ethernet and wireless adapter having problems.

My ethernet will disconnect usually once or twice a day usually an hour after the laptop has been turned on. After that it won't disconnect again.
The wireless internet will disconnect more often and it is random as to when it will happen.

The disconnection happens like this,
Unable to browse the web using any internet browser like firefox or internet explorer
Any online game i play kicks me from the server to a login screen (if the game has one)
However, the laptop still shows a stable connection to the ethernet/wireless. It will show the yellow triangle with an exclamation mark for a second then show a stabe connection.

Laptop Specs;

Windows 7 64-bit
AMD Athlon II Dual-core M320 2.1 GHz
4GB RAM
Wireless Adapter - Atheros AR9285
Ethernet Adapter - Realtek PCIe FE Family Controller

So far i have tried;

Updating all devices,
Uninstalled the devices and re-installed,
Unistalled Anti-virus software,
Disabled Firewalls,
Changing Channels on the router,
Update Router firmware,
Reseting the router.

Thanks for taking your time to read the above and thanks for any help that you can ... Read more

Answer:Ethernet/Wireless Disconnecting.

This is the listing of errors in your event log (from DDS that I asked you to run)

04/08/2010 13:03:31, Error: Service Control Manager [7031] - The Apple Mobile Device service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
04/08/2010 12:52:38, Error: Service Control Manager [7026] - The following boot-start or system-start driver(s) failed to load: StarOpen
04/08/2010 12:52:25, Error: atikmdag [52236] - CPLIB :: General - Invalid Parameter
04/08/2010 12:52:17, Error: Application Popup [1060] - \SystemRoot\SysWow64\Drivers\StarOpen.SYS has been blocked from loading due to incompatibility with this system. Please contact your software vendor for a compatible version of the driver.
04/08/2010 11:58:33, Error: Service Control Manager [7001] - The Computer Browser service depends on the Server service which failed to start because of the following error: The dependency service or group failed to start.
04/08/2010 11:58:32, Error: Service Control Manager [7001] - The HomeGroup Provider service depends on the Function Discovery Provider Host service which failed to start because of the following error: The dependency service or group failed to start.
04/08/2010 11:58:32, Error: Microsoft-Windows-DistributedCOM [10005] - DCOM got error "1084" attempting to start the service WSearch with arguments "" in order to run the server: {9E175B6D-F52A-11D8-B9A5-5050... Read more

9 more replies
Relevance 41.82%

Hi! My father has a wired ip camera in his shop for security (which incidentally is in wireless range of my flat). I have suggested that he ditch his broadband connection because the camera is the only thing that uses it and that I could connect his camera to my wlan. Am I right in thinking that a wireless ethernet bridge would be the solution? I have a Netgear dg834gt as my modem/router.If a bridge is the answer would this product suffice?click hereI would like to stick to netgear for compatibility issues.

More replies
Relevance 41.82%

I'm running a Gateway DX4720-03 (manual: https://www.manualowl.com/m/Gateway%.../Manual/148002) with Windows 7 HP 64-bit and have a Nvidia GeForce 7100/nForce 630i card and a Linksys WRT 320N router. My problem is that I always thought that this desktop computer was wirelessly connected to the internet, but I just found out that it was connected via an ethernet cable. At the moment everything is working just fine (portable computer wirelessly synched with desktop, guests can easily access my wifi, no problems with the internet, etc), except when I try to set up my wifi camera as an access point and have the computer recognize it. It was at this point, after much, much research and fiddling, I discovered that my network was set up as a Local Area Connection using an ethernet cable. In fact, the router was never listed in Network (under Network Infrastructure) until I just now selected "Add a wireless device." But, when going to Device Manager, Network adapters has MS Teredo Tunneling Adapter and NVIDIA nForce 10/100/1000 Mbps Ethernet and under Network Infrastructure Devices there is MS Wireless Router Module...the Linksys router doesn't show up here even though I just added it. From all this manipulation, it should be obvious that although I can very handily tweak my browser (Firefox), maintain a clean computer, solve various computer related problems - with help from the various forums, I am truly at a loss when it comes to networking and wireless set up.

So,... Read more

Answer:Trouble going from ethernet to wireless...

Hi flycaster, have you tried prioritizing your wireless connections? Wireless Setting.pdf

9 more replies
Relevance 41.82%

Hey,

I have been thinking about setting up a wireless webcam to show live streaming video of my hummingbird feeder or aquarium. The way I would like to set this up and to have it connected (preferrably wirelessly) to my router, and then be able access it through the internet either through FTP or perhaps some other way.

I read that FTP may not be able to support live streaming video because of the bandwidth involved. If that's true, I guess I could set up a desktop unit to act as a server, but would like to avoid that.

Has anyone out there tried this before? What camera did you use and what problems did you have?

I'm using a Linksys WRT54G router connected to a cable internet connected at 100 Mbps.

Any thoughts?
 

More replies
Relevance 41.82%

I have a cable modem hooked up to my router, and the ethernet cable from my router to my computer. internet and wireless were working just fine for about a month up until yesterday. it just stopped. now, either my ethernet will connect or my modem, but never both, which will not allow me to have wireless. i've tried resetting both the router and modem, but no luck. any help is appreciated. thanks
 

Answer:wireless and ethernet problem

7 more replies
Relevance 41.82%

I have a problem that my IP says is my Ethernet adapter... I have updated drivers, and tried just about everything, with no success.. My wireless speed is 117mbps/23mbps consistently.. However my direct to my modem Ethernet cable gets no better than 70mbps/22mbps consistently.. Any help would be greatly appreciated. I am running Windows 10 64bit...

Thanks

Answer:Ethernet is slower than wireless....

It might depend upon the computers and the Router, whether the Wired/Ethernet is 10/100 or 10/100/1000 [Gigabit]. Also the Wi-Fi may be 802.11b/g/n or 802.11ac [the latest]. I have a computer running the Insider Preview that needs a Gigabit NIC but the 10/100 is fine as it's not a production machine.

1 more replies
Relevance 41.82%

Hi friends,
i use my laptop mainly with wireless network,
i wonder if there is a setting to disable wireless network auto. when Ethernet cable plugged in (and vice versa)?

*without 3rd party app's

Thanx

Answer:wireless & Ethernet conflict

What conflict are you having?

I run my laptop wirelessly most of the time as well but occasionally connect a Ethernet cable and everything works fine.

9 more replies
Relevance 41.82%

When I bring my laptop home, I plug in a Cat5 cable and boot it up. Windows 7 then hooks up to my router with both the cable and via wireless. When I then transfer files from it, they transfer at the lower wireless speeds. If I disable the wireless on the laptop, the transfer speed increases to Cat5 levels.

Is there some way to get it to use the wired connection instead of the wireless connection without having to disable the wireless adapter in Device Manager (which means I have to re-enable it when I take the laptop on the road again)?

Answer:Wireless vs Cat5 ethernet

When the eithernet cable is plugged in it takes over the wireless connection and only the wired connection is used. In other words it should be happening automatically as soon as you plug in the cable.

Quite a few have tested this including myself so unless your system is somehow different than everyone else's I can't imagine why you would be having this problem.

7 more replies
Relevance 41.82%

Hello, are we can make ICS with Ethernet and wireless at same time? If can, how to apply it?

Answer:ICS with LAN/Ethernet Card and Wireless

Hi crossnet,

Can you please explain what you mean by "at the same time"? A description of the desired setup would be helpful.

Cheers,

Walker
Windows Outreach Team

3 more replies
Relevance 41.82%

I'm currently using 2 different isp's one wireless and the other ethernet trying to use them both at the same time to download or browse making them work together is this even possible?

thanks
 

Answer:Wireless/ethernet question

Yes, it is. . . You would at the very least need a "Dual WAN" router to handle the distributing the bandwidth. Then once you have a router that can handle it you can look into the pro's and con's of the different methods of spreading the bandwidth around.
 

2 more replies
Relevance 41.82%

I just bought a Canon MG 6450 All in one. Basic set up was OK. I used a Ethernet cable to connect it to my Netgear router - my principal use is with a desktop. I also have a wireless connected Laptop and an I pad. The manual is a bit sketchy but I would like to be able to continue to use the printer with wired connection to desktop but enable it to print from the Laptop or the iPad without the desktop switched on. I assume I have to install the printer CD onto the laptop and get the iPad app? If I set the printer to wi fi, does that disable the Ethernet connection? I do not have a formal network where files can bee seen from each device. It appears to have all the up to date functions except fax. The router gave me an option to set "Air print" , which I enabled, but what is that?

Answer:Wireless plus Ethernet printer set up

I assume I have to install the printer CD onto the laptop
and get the iPad app?

If I set the printer to wi fi, does that disable the Ethernet

yes
click here air print will allow your ipad to print wirelessly
No

10 more replies
Relevance 41.82%

My wireless was working fine... didn't touch anything and then it stopped.

My roommate can connect fine and I can connect with the ethernet cable.

I ran the Xirrus and it's not detecting any networks and i'm right next to the modem.

I did a system restore, ran a virus scan and no dice.

Any suggestions?
 

Answer:ethernet connection but not wireless

7 more replies
Relevance 41.82%

Hi all
Im not compleatly computer illeterate but basically if something goes wrong im buggered!

latest problem is that I was connect to orange broadband (live box) with numerous problems, the main one being that i could only connect using ethernet(?) after numerous phone calls they sent me to 192.168.1.1 or something to that effect and had me change a few things around and hey presto it worked.

problem is I then moved and am now trying to connect to my very unhelpful flatmates O2 wireless box ii. and am back to only being able to use a cable to connect. I tried the previous address that orange gave me but im guessing it only works for them as it wont even display the page now.

i'm pretty sure the problem isnt the O2 box as my flatmate and friends have no problems connecting and i cannot connect to any wireless networks (macdonalds WiFi included lol)

so where do i go from here?
 

Answer:Solved: can use ethernet but not wireless!

11 more replies
Relevance 41.82%

I have just upgraded my Internet Connection to a 20Mb/s one. BT told me that my line should support between 7Mb/s and 11Mb/s but I am only managing 3.45Mb/s.
Currently, my PC has no Wireless Card, so it is connected to the "Home Hub" by a CAT5 Cable. The Home Hub is connected to an Extension Telephone Socket, about 20' from the Main Socket.
My Question: Would I be better off to stick a Wireless Card, or Dongle, into the PC and connect the Home Hub to the main Telephone Socket?
My Lappy has a neat little Wireless Dongle which works well through two walls. If I were to add a Powered USB Hub, to the PC, and plug the Dongle into that. Would it be OK.

Answer:Wireless or Ethernet Connection

The first thing I would suggest is that you connect the Home Hub directly to your main telephone socket with a filter. Extension Telephone Sockets are notorious for slowing down the connection.
You could get a wireless card or dongle for your desktop PC but it would perform better via an ethernet connection directly to your router. If you want to position your desktop quite a way away from the router you can buy a longer ethernet cable.

10 more replies
Relevance 41.82%

hey,

I am trying to use my wireless router to convert my wired connection to wifi. i have two laptops in which i would like to use the wireless connection. Only router and one laptop have ISP mac registration. I would like to use my router as a bridge to conect to internet and then to trasmit wirelessly, so that i can use internet in both the laptop remotely. Is it possible?

currently one laptop is connected to internet and that too wired connection. it is having a static ip and gate way. How can i use this static ip and gateway so that the router makes the connection and later assigns a new ip to my laptops.

if you are still not clear about the question I can give you more details

can anyone please help me in this......

Answer:converting ethernet to wireless

I think I can help... but your not being very clear.

As I understand it, you have a Wired Router which is connected to the Internet. You want to connect a Wireless Router and use it as a switch, to transmit the data from the wired router to 2 wireless laptops?

So it would look something like this:

Internet>Wired Router>Wireless Router>Laptops

Is that right?

5 more replies
Relevance 41.82%

This seems to be a common problem but after trying all that is out there (repairing and reseting TCP/IP Winsock, random You-Tube videos) I'm stumped. Here is my info from my cmd's IP config when I'm online and when I'm offline listed after that.

*ONLINE*

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Windows\system32>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Lisa
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8071 PCI-E Gigabit Ether
net Controller
Physical Address. . . . . . . . . : 00-1D-72-3D-89-61
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::48a5:e32d:4169:1d0c%12(Preferred)
IPv4 Address. . . . . . . . . . . : 10.0.0.84(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Sunday, July 24, 2011 10:55:52 PM
Lease Expires . . . . . . . . . . : Monday, July 25, 2011 10:55:52 PM
Default Gateway . . . . . . . . . : 10.0.0.1
DHCP Server . . . . . . . . . . . : 10.0.0.1
DHCPv6 IAID . . . . . . . . . . . : 268442994
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-0F-F2-AF-24-00-1D-72-3D-89-61

DNS Servers . . ... Read more

Answer:connect to ethernet not wireless

7 more replies
Relevance 41.82%

whenever i try to connect my laptop (windows 7) wirelessly , it does not connects to it where as the ehernet cable works fine with it. i am using beetle 450tc2 router. please help
 

Answer:my wireless not working but ethernet does

do any other devices work with your wireless ?
 

1 more replies
Relevance 41.82%

Hey is there anyway i could use my computer to get on a wireless network and then hook my computer up to a wired router and share the connection? id like to get on xbox live using my wireless.( its fast enough) thanks
 

Answer:Wireless to ethernet question

What is the nature of your Internet source?


 

3 more replies
Relevance 41.82%

In my office upstairs I have my broad band modem and two PC's and two printers. I would prefer to have these hard wired (ethernet) connected.

Down stairs I want to set up a PC for my wife via a wireless connection and I would also like to be able to use a lap to from the basement from time to time.

Can any one suggest a suitable configuration.

I have a friend with a similar set up who uses Net Gear DG632 and Net Gear WPN 824, but don't know if this is the best option.

Any help would be appreciated.
 

Answer:Ethernet and Wireless Combined

There's nothing wrong with your friend's configuration. One thing that I'd be thinking about, is the fast that you're going down two floors with the wireless signal. You might want to orient the antennas in a horizontal attitude to get more signal up and down, since the normal radiated pattern is like a bow-tie out the sides of a vertical antenna.
 

1 more replies
Relevance 41.82%

Hey guys! I have a problem I can't seem to solve. My wireless connection stopped yesterday afternoon when I was downloading a TV show (maybe the dl changed some settings?). I can connect with the cable though! Any help would be appreciated!!

Thanks,
Bill
 

Answer:Ethernet works. Wireless does not...

16 more replies
Relevance 41.82%

Hi, At work we have 5 computers all networked together via ethernet cables. We also have 4 stand alone computers that we would like to network via a wireless network so that they can share a broadband connection. So far so good. Can we also connect one of the ethernet connected PC's wirelessly as well. Would this work or can't you connect via Ethernet and wireless at the same time? Ta, Dennis.

Answer:Wireless and ethernet question.

You have also posted this in the Helproom. Please don't keep two threads open.

4 more replies