Computer Support Forum

Bitlocker turned itself off, Samsung Magician Says Encryption enabled

Question: Bitlocker turned itself off, Samsung Magician Says Encryption enabled

Getting h/w encryption on my laptop has been a bit of a nightmare, but I thought I had it working.... Here is what I did:

Installed M.2 Samsung 850 evo driveInstalled samsung magician, and set Encryption to Ready to Enable.Removed existing HDDRan samsung secure erase from DVD.Installed Win10Installed Samsung Magician (It said Encryption enabled, finally!)Turned on Bitlocker. It did not prompt me for how much of the drive to encrypt, which (I was told) means that it is using hardware encryption of the drive.Added the HDD back.Updated all my drivers to latest versions for my laptop (Asus GL552VW), including Intel RST drivers (14.x)

After doing all that I just noticed that BitLocker is turned off on my C: drive (the m.2 drive)! I looked in Magician and it still says Encryption is enabled. So I went into Bitlocker to turn it on again for the drive. But now it is prompting me to encrypt used space, or whole disk, which means it isn't using h/w encryption.

What am I doing wrong here? Do I need to enable Secure Boot in BIOS? I have read that the Intel RST drivers can cause problems, but I thought that was only with older versions? Is IRST still an problem?

Edit: When I look in the Disk Management took, I see the C: partition of Disk 1 says: NTFS(Bitlocker Encrypted)., But in Bitlocker Drive Encryption tool it says it is off. Manage-BDE -status c: says that there is no encryption. Really confused now.

Relevance 100%
Preferred Solution: Bitlocker turned itself off, Samsung Magician Says Encryption enabled

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Bitlocker turned itself off, Samsung Magician Says Encryption enabled

There are a list of requirements for hardware based encryption here - doesn't look like secure boot is required: How to Enable BitLocker Hardware Encryption with SSDs Helge Klein




For data drives:
The drive must be in an uninitialized state.
The drive must be in a security inactive state.

If the drive is used as a startup drive the following apply additionally:
The computer must always boot natively from UEFI.
The computer must have the Compatibility Support Module (CSM) disabled in UEFI.
The computer must be UEFI 2.3.1 based and have the EFI_STORAGE_SECURITY_COMMAND_PROTOCOL defined.



I only use bitlocker with software based encryption though so can't add to what they say I'm afraid but some of the comments look interesting.

5 more replies
Relevance 130.21%

Getting h/w encryption on my laptop has been a bit of a nightmare, but I thought I had it working.... Here is what I did:

Installed M.2 Samsung 850 evo driveInstalled samsung magician, and set Encryption to Ready to Enable.Removed existing HDDRan samsung secure erase from DVD.Installed Win10Installed Samsung Magician (It said Encryption enabled, finally!)Turned on Bitlocker. It did not prompt me for how much of the drive to encrypt, which (I was told) means that it is using hardware encryption of the drive.Added the HDD back.Updated all my drivers to latest versions for my laptop (Asus GL552VW), including Intel RST drivers (14.x)

After doing all that I just noticed that BitLocker is turned off on my C: drive (the m.2 drive)! I looked in Magician and it still says Encryption is enabled. So I went into Bitlocker to turn it on again for the drive. But now it is prompting me to encrypt used space, or whole disk, which means it isn't using h/w encryption.

What am I doing wrong here? Do I need to enable Secure Boot in BIOS? I have read that the Intel RST drivers can cause problems, but I thought that was only with older versions? Is IRST still an problem?

Edit: When I look in the Disk Management took, I see the C: partition of Disk 1 says: NTFS(Bitlocker Encrypted)., But in Bitlocker Drive Encryption tool it says it is off. Manage-BDE -status c: says that there is no encryption. Really confused now.

Answer:Bitlocker turned itself off, Samsung Magician Says Encryption enabled

There are a list of requirements for hardware based encryption here - doesn't look like secure boot is required: How to Enable BitLocker Hardware Encryption with SSDs Helge Klein




For data drives:
The drive must be in an uninitialized state.
The drive must be in a security inactive state.

If the drive is used as a startup drive the following apply additionally:
The computer must always boot natively from UEFI.
The computer must have the Compatibility Support Module (CSM) disabled in UEFI.
The computer must be UEFI 2.3.1 based and have the EFI_STORAGE_SECURITY_COMMAND_PROTOCOL defined.



I only use bitlocker with software based encryption though so can't add to what they say I'm afraid but some of the comments look interesting.

6 more replies
Relevance 91.02%

I am trying to create a Windows 10 image for my organization, and cannot figure out one particular issue with Bitlocker. It seems that after I sysprep, and throw the image on a new computer, it then has BitLocker partially enabled. What I mean is that when going to the About page in System in the settings it shows in red "You need a Microsoft account to finish encrypting this device". The C: drive also shows an opened lock with a warning icon (exclamation point in a triangle).

When going to the Manage Bitlocker page is shows an option to turn on bitlocker. Searching various sites on google has led me to the idea of turning on bitlocker, then turning it off again before sysprep. This does in fact disable BitLocker, however it appears to turn on again after imaging on a new computer.

While it's not a huge pain to disable BitLocker afterwards it does take several minutes to decrypt and multiplied that by many computers does eat up a bit of time in the end. Is there something I'm missing here to make sure BitLocker remains disabled after imaging? These are generally on Microsoft Surface Pro 4 computers that this happens on, it did not do the same thing on an HP laptop I tested.

Answer:Bitlocker Device Encryption enabled after imaging

Bump

1 more replies
Relevance 91.02%

New to this forum, and this is my first thread. Please provide me with some help if possible.

So my problem is the following: Kept getting BSODs from some driver inflicting with ntkernel according to whocrashed and bluescreenview. Anyways, disabled my network card as I thought that was faulty, updated all my drivers and checked my ram with memtest just to be sure. Was still getting the BSODs.

Decided to use driver verifier to see which driver that caused this. Bad idea. Turns out that one of the drivers indeed was faulty, but now I'm getting blue screen before I can even log in to windows. Tried to boot into safe mood a thousand times by repeatedly pressing F8 and shift+F8 to no avail. Thought that I then could turn of driver verifier from the command prompt, but No! (Since if I could turn this of the BSOD before system start would then stop since the purpose of windows driver verifier is to force the faulty drivers to create BSOD).

Then downloaded EaseUS Recovery Essentials to see if that could help. Turns out that my ENCRYPTED (bitlocker) which my operating system is on, can't be found because I'm assuming that the change in boot order previously when running memtest disabled it.

Now had to find my win8 installation CD to force it into safe mode alternatively to re-install it, but to no avail. It says that the hard-drive is still locked even though I've got the key in a USB stick attached to the computer and even though I manually put in the recovery key. Was now to... Read more

Answer:Re-installing win8 with bitlocker encryption enabled on old OS.

Just realized I posted in the win 7 forum instead of the win8 forum. My apologies.

1 more replies
Relevance 86.92%

Hello,  how can I make working HW encryption with Bitlocker on the Samsung SSD 850 EVO? Is it supported on my laptop?

Answer:Bitlocker HW encryption with Samsung 850 EVO on Probook 6560...

Hi, Setting this up could be a little bit hard. Please try the following instructions    https://helgeklein.com/blog/2015/01/how-to-enable-bitlocker-hardware-encryption-with-ssd/   https://arstechnica.com/civis/viewtopic.php?t=1312261 Regards.

1 more replies
Relevance 75.85%

Hi, I bough a 250 GB Samsung SSD EVO 850.I got a Lenovo X201 computer.My SSD is not recognized by the MAGICIAN Samsung programso i cannot clone my HDD to my Samsung SSD. Please HELP me !!!

Answer:Samsung SSD 850 250GB not recognized by Lenovo X201 Samsung Magician Program

Hi, nocoin, and welcomeIs the SSD installed into the main bay of laptop or external USB box?Samsung Magician application is a tool not for cloning operation. Use Samsung Data Migration Software intead. It's a simple, free of charge, reduction of the Acronis True Image Home application.Then, after installing SSD into the laptop, use Magician app for disk management.Also, you might use another software for the cloning:Clonezilla, Macrium. As well Acronis ATIH full version (I'm not sure whether trial version supports entire drive cloning).

2 more replies
Relevance 74.62%

I have a Samsung SSD that I recently formatted and installed Windows 7 64 bit on. I tried to use Samsung Magician software but it tells me that "Magician cannot communicate with the below Samsung SSD. Please check with other compatible storage drivers and try again. 1. Samsung SSD 840 EVO (etc)"

Upon some investigation, it appears this is because the SSD is listed as SCSI in device manager. I was wondering if there were any way to fix this so that the Samsung Magician software can communicate with the SSD
 

Answer:Samsung SSD listed as SCSI; Samsung Magician not working

HI

What Motherboard make and model are you using and what controller do you have the SSD plugged into as if its the Marvell (JMicron ones can also cause this) controller then that maybe your issue as at times the Marvell controller will list in Windows a SATA drive as SCSI, pita!!

So if you can swap the SSD into a Intel controller then that should fix the issue, just make sure that the drive is listed in the BIOS and as 1st boot device.

Are you running in the BIOS RAID Mode and if so that could also be a source of the issue. Really need to be if not running RAID to be in ACHI mode in the BIOS.
 

2 more replies
Relevance 73.39%

Hi guys, i'm using win 10 pro x64 on a samsung evo 850 120gb ssd. My samsung magician just can't recognize the OS, anyone knows how to fix? Thank you and sorry for my bad grammar!

Answer:SSD Samsung Evo 850 & Samsung Magician RAPID mode

Nope - Unless you really need a deep queue service, it's snake oil anyways. You can following an ongoing conversation here: Samsung Magician

15 more replies
Relevance 72.16%

I have an older Laptop that operates on  Windows 7 Ultimate,I have the Bitlocker Drive Encryption on and encrypted for Drive C:   I now started the process of encrypting my external usb hdd Drive E: which has a long way to go for it's large
size. During the encryption I needed to disconnect it so I paused the encryption like it says to do before removing or changing any files on it. I then plugged my drive into a newer laptop I have that operates on Windows 10,. I was prompted for the Bitlocker
Drive Encryption Password screen like normal just like on my Windows 7 laptop so I enter the password and it was correct and it began the encryption process again. When I finished with what I needed to do on the Windows 10 laptop I paused the encryption again
and disconnected the drive. I am now back on my Windows 7 Ultimate OS and plugged the drive in, Bitlocker Encryption Password Screen comes up again and I entered my password but now for some reason it's saying the password is incorrect?  "But It's
not incorrect",is there a reason why this has happen and a way to fix it? My second issue is that I have the recovery key written down on paper but on the fifth line of the eight lines that makes the recovery key I left out a number,did not write it correctly,
there for I cannot just reset my password using the key and get back to normal again. Any way to find the lost number to the key? As I do have the rest of it written correctly please help tha... Read more

More replies
Relevance 72.16%

Installing MBAM with SCCM 2007. Normally works fine. On one workstation however...
On SCCM it fails. Without details.
When trying to run C:\Program Files\Microsoft\MDOP MBAM\MBAMClientUI.exe manually the error comes up. "BitLocker drive encryption has a problem and must close. BitLocker will close now. Contact the help desk of your company if you need additional help.
Details: Error fetching the encryption percentage complete."

Any ideas?

Answer:BitLocker drive encryption has a problem and must close. Details: Error fetching the encryption percentage complete.

ERROR: An error occurred (code 0x8004100e):
Invalid namespace

Figured it out...
http://support.microsoft.com/kb/2756402

4 more replies
Relevance 72.16%

Good morning/afternoon/evening gentleman, wherever you are around the globe.

Today, after startup, Windows suggested to me, that I should export my encryption case to some external storage, just in case some bad things happen.

I was surprised, as I haven't enabled any encryption on my laptop.
Or maybe I was wrong, thinking that encryption = BitLocker.

Quick search in Control Panel reveals there is also a setting in User Accounts section named "Manage file encryption certificates".

I haven't enabled encryption in any folder/file using it's Properties window.

So why this "export your keys" option? I don't remember that from Windows 7.

I would be great if someone explained that to me, as I've never used encryption before (since I don't need it).
Also, is cloud storage like SkyDrive/DropBox an appropriate place to store that files?

More replies
Relevance 72.16%

Hi
After rebooting one of our test machines, bitlocker wanted the recovery key.
There were no hardware modifications on that machine.
Error message in event log:
Bootmgr failed to obtain the bitlocker volume master key from the TPM because the PCRs did not match
Event id 24635, source bitlocker-driver
 Each time the machine starts, the recovery key is needed.
Any idea how to solve that issue and why it happens?
update:
Second partition was created manually on that machine. So that's clear that bitlocker reacts...
But now: how can I confirm those changes so that the recovery key is not needed each time we boot?

Answer:Bitlocker enabled drive, recovery key needed during boot, PCS did not match, event id 24635, source bitlocker-driver

Hi,
 
I would like to confirm if BitLocker accepts the recovery key?
 
Please update the BIOS to improve the stability for TPM first.
 
I also would like to suggest you disable and enable BitLocker again to reset the settings.
 
For more information, please refer to the following link:
 
http://technet.microsoft.com/en-us/library/dd835565(WS.10).aspx
 
Regards,
 
Arthur Li
TechNet Subscriber Support
in forum
If you have any feedback on our support, please contact
[email protected]
 Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

8 more replies
Relevance 70.52%

I get above error; I've updated the intel rapid storage driver and asmedia sata controller driver.
My motherboard is an asus z97 deluxe. Help is appreciated; thx !

Answer:Samsung Magician / Samsung SSD 840 series

Verify whether you have the latest release of the Magician software installed. It should be 4.9.7 If it isn't, download the latest version from the Samsung web site.

1 more replies
Relevance 70.52%

I get above error; I've updated the intel rapid storage driver and asmedia sata controller driver.
My motherboard is an asus z97 deluxe. Help is appreciated; thx !

More replies
Relevance 69.29%

Samsung has released a new version of Magician.
All features work in Windows 10.
TRIM is turned off so that Windows can perform that task.

Answer:Samsung Magician 4.95

been out about a week or so

0 more replies
Relevance 69.29%

Blazing fast using Samsung 840 pro.

Answer:Samsung Magician 4.9 is available

Old old news. See:

Samsung Magician 4.9 Released AND

Solved Samsung Magician - Page 31 - Windows 10 Forums (starting around post # 306)

3 more replies
Relevance 69.29%

Samsung has released a new version of Magician.
All features work in Windows 10.
TRIM is turned off so that Windows can perform that task.

Answer:Samsung Magician 4.95

been out about a week or so

1 more replies
Relevance 69.29%

i just tried ver 5.1 and noticed trim is enabled ,but still says drive is not supported i have the factory m.2 drives anyone know if some changes have come about re trim?

Answer:p70 and samsung magician

I am running two M.2 960 pro drives in a RAID config on my P51 - the Samsung magician did not recognize my array. I am currently using HWinfo64 and all info is available.

5 more replies
Relevance 69.29%
Question: Samsung Magician

Samsung Magician Version 5.0.0

? Magician Software Installation Guide
***Important information, please read the pdf***
   Information

Samsung has updated their SSD Support Site.
The old link( Samsung V-NAND SSD ) doesn't bring you directly to the downloads any more, but to the new SSD Support Homepage.

To go directly to the downloads for your particular consumer Samsung SSD, go to this link: Consumer SSD | Download | Samsung V-NAND SSD

Also for all SSD tools: Tool & Software | Download | Samsung V-NAND SSD


Original Rant During the Technical Preview




Note: After going without RAPID for months now, I haven't noticed any difference in my day to day computing that RAPID is not there. Since RTM I have done a clean install and let Windows configure Windows for the SSD, and seen absolutely no difference. Of course I only buy Samsung Pro's Ya'lls truly Cliff



One thing I hope is, Samsung gets their head out of there butts and start to make Magician Windows 10 compatible. I get a huge boost using RAPID mode, can even make a PCIe SSD weep.

From my Windows 8.1 desktop just done this morning:
For users:

For Geeks:

One can see my 840Pro 256GB is blazing with RAPID turned on.

Plus I prefer to use their own Performance Optimization tool instead of Windows Defragment and Optimize Drives.

Every build I've tried to install it on causes a either a BSOD or it refuses to boot at all. When upgraded from Windows 7 it won't ... Read more

Answer:Samsung Magician

I wouldn't use some of the system performance tweaks on magician until it says it supports Windows 10.

more replies
Relevance 69.29%

Blazing fast using Samsung 840 pro.

Answer:Samsung Magician 4.9 is available

Old old news. See:

Samsung Magician 4.9 Released AND

Solved Samsung Magician - Page 31 - Windows 10 Forums (starting around post # 306)

1 more replies
Relevance 69.29%
Question: Samsung Magician

Note: After going without RAPID for months now, I haven't noticed any difference in my day to day computing that RAPID is not there. Since RTM I have done a clean install and let Windows configure Windows for the SSD, and seen absolutely no difference. Of course I only buy Samsung Pro's Ya'lls truly Cliff



One thing I hope is, Samsung gets their head out of there butts and start to make Magician Windows 10 compatible. I get a huge boost using RAPID mode, can even make a PCIe SSD weep.

From my Windows 8.1 desktop just done this morning:
For users:

For Geeks:

One can see my 840Pro 256GB is blazing with RAPID turned on.

Plus I prefer to use their own Performance Optimization tool instead of Windows Defragment and Optimize Drives.

Every build I've tried to install it on causes a either a BSOD or it refuses to boot at all. When upgraded from Windows 7 it won't BSOD but is unstable and Magician crashes taking RAPID with it.

Plus I need Magician to update the disk's firmware(the last firmware update is what put it over the top, and this disk is a couple of years old has had many images and different OS installations:

Answer:Samsung Magician

I wouldn't use some of the system performance tweaks on magician until it says it supports Windows 10.

more replies
Relevance 69.29%

Now that Samsung's Magician software is finally available for Windows 10, I have my SSD running with Rapid Mode again.

I notice that the application has created a start up entry "Samsung Rapid Mode Notification Utility". This places an icon in the right corner of the Taskbar. Is this a necessary start up utility for Rapid Mode to work?

Answer:Samsung Magician 4.8

GregH said:

Now that Samsung's Magician software is finally available for Windows 10, I have my SSD running with Rapid Mode again.

I notice that the application has created a start up entry "Samsung Rapid Mode Notification Utility". This places an icon in the right corner of the Taskbar. Is this a necessary start up utility for Rapid Mode to work?



Don't have that entry you write of. Nothing on the right corner of the taskbar either. Rapid Mode is enabled and there's quite a substantial increase in performance!

7 more replies
Relevance 68.47%

Alright so I just recently started using the Intel SSD Toolbox software for my 120g x25-m, and found it pretty simple and if the weekly trims help, that's great. I was wondering if there is an identical program I should consider using for the samsung 830, I know it came with a program titled Magician Software, which more or less from what I can dig up, does similar things. Does anyone have any experience with it? Is it good and worth using? Or is there something else floating around that would be better? The samsung 830 (256gb) is my main drive and OS.

Thanks~
 

Answer:Samsung 830 (Magician Software?)

I've used both and SSD Magician is roughly equivalent in features if not a little less polished than the Intel software. AFAIK there are no alternatives, this is written by Samsung themselves.
 

3 more replies
Relevance 68.47%

Samsung Magician 4.9 Released






New in Version 4.9

- Magician version 4.9 features a number of improvementsover version 4.8:

- New model support: Samsung 750 EVO SSD





Samsung download links:

Samsung 4.9 software

Installation Guide

Alternate MajorGeeks link:

Samsung SSD Magician 4.9

Answer:Samsung Magician 4.9 Released

IownAmoneyPit said:

Samsung Magician 4.9 Released



Samsung download links:

Samsung 4.9 software

Installation Guide

Alternate MajorGeeks link:

Samsung SSD Magician 4.9



This is OLD news, version 4.9 was released about 2 weeks ago....or more.

5 more replies
Relevance 68.47%

I left 50GB of my 500GB Samsung EVO 840 SSD at the end of the memory just for over provisioning. But it seems that they are not seen because they are allocated after my Fedora install.

Any idea on how to work with this?

More replies
Relevance 68.47%

Samsung Magician 4.9 Released






New in Version 4.9

- Magician version 4.9 features a number of improvementsover version 4.8:

- New model support: Samsung 750 EVO SSD



Samsung download links:

Samsung 4.9 software

Installation Guide

Alternate MajorGeeks link:

Samsung SSD Magician 4.9

Answer:Samsung Magician 4.9 Released

why whenver a new version of samsung magician comes out does it never notify me even when I check inside the program?

I had magician 4.8 and 4.7 and they both never updated .. I had to manually go to the website and download them and update them..

others have this issue too?

2 more replies
Relevance 68.47%

I installed Samsung Magician to see if my SSD firmware was up to date. It is.
It's telling me that my OS is currently optimized for use with a HDD.

Answer:Let Samsung Magician optimize SSD?

I have Samsung 850 EVO but I don't use their optimization as my PC is used for my recording studio and I have it manually optimized for recording. I tried it and one thing it did was change my "Power Plan" to something I didn't want. I had to manually reset it.

If not doing anything specifically that the Magician would interfere with, I say use it.

1 more replies
Relevance 68.47%

Hey, I got my Y2P this week,(i7,8GB and 512 SSD).   When i start samsung magician, i unable to find Samsung SSD:,    The Y2P does have newest bios installed, and i have updated other drivers. any suggestions ? 

Answer:Yoga 2 Pro, Samsung Magician

Anyone?

2 more replies
Relevance 68.47%

Their servers have a metered connection.
Tool & Software | Download | Samsung V-NAND SSD

New Features
New Samsung Magician features a number of improvements over version 4.9.7
? Completely redesigned and more intuitive user interface
? New Models support : Samsung SSD 960 PRO, 960 EVO
? System Compatibility guide
? SSD model specific feature installation system : only required feature components are
installed and updated

Systems: Windows 7/8/10

The following Samsung SSDs are supported:*
Samsung SSD 960 PRO(M.2)
Samsung SSD 960 EVO(M.2)
Samsung SSD 950 PRO(M.2)
Samsung SSD 850 PRO
Samsung SSD 850 EVO
(2.5?, mSATA, M.2)
Samsung SSD 840 PRO
Samsung SSD 840 EVO(2.5?, mSATA)
Samsung SSD 840 Series
Samsung SSD 830 Series
Samsung SSD 750 EVO
Samsung SSD 470 Series
(*Some features may not be supported for all models.)

Rapid Mode is disabled to install. Last time they did this RM wouldn't enable.
Update at your own risk.

Answer:Samsung Magician 5.0.0.790 released

they probably disabled rapid mode due to massive complaints. sorry but if the drive has to steal ram to increase it's speeds something is majorly wrong.

34 more replies
Relevance 68.47%

1) Does Samsung Magician always need to be running to benefit from its OS optimizations/tweaks?

2) Also, what about RAPID Mode? does it also rely on Samsung Magician to work properly?

3) Is there a way to keep Samsung Magician running on startup, but not get a UAC prompt? All my other programs start with no UAC prompt so why does it need to prompt me everytime it starts?

Answer:Does Samsung Magician always need to be running?

I've only looked at the OS optimization feature. It seems to be just a front end for setting Registry values. Once the Registry values are set, Magician running or not has no effect. Depending on the Registry setting, you may have to log off or restart for it to kick in.

The UAC is probably because programs that require running as Administrator can't be run immediately at startup withput triggering UAC. There are ways around it such as creating a scheduled task. But since it doesn't need to be running for the tweaks it may be moot.

5 more replies
Relevance 68.47%

When I did the new clean install of Windows 10 on my XPS 9530, after applying the Samsung Magician software 4.6, i noticed that I could not enable RAPID mode because the software was unable to determine my OS Version.  I did some poking around and found this Microsoft forum posting about having the similar problem with Windows 10 Preview version.
Even though Windows 10 is out and legit, it doesn't look like Samsung is ready to release an update to its software that will fix this problem.  The posting has instructions but if you rather save time reading
[Back out Samsung Magician 4.6 if you already installed it before proceeding]
1.  Install Samsung Magician 4.4 from this link (the link is from Samsung) and reboot.  IGNORE any upgrade notification you get until you have completed the next step!
2.  Enable RAPID Mode on the drive you want and reboot.  Make sure that RAPID mode is working with a speed test, you will know when its working
3.  Now perform an inplace upgrade to the software.  For me, it only updated the software to 4.5 however I have the EVO 1tb drive installed so I wanted to get the lastest, 4.6.  So I did a series of 2 upgrades.   
I now have 4.6 running with RAPID Mode enabled.  The kicker is, IF I should require backing out of RAPID mode, I will be unable to reenable with the current version of 4.6.  I would have to downgrade and start these steps all over again.  However in the enti... Read more

Answer:Samsung Magician vs Windows 10

Hi, here is a solution. I did it and it works with magician 4.6

9 more replies
Relevance 68.47%

I saw this on Microsoft web site, using a hack tool to enable to Raid Mode button, click it on, reboot and voila you have Rapid Mode turned on! My C: drive had this change before/after:

Sequential Read: 562 -> 4975
Random Read 95687 -> 151673
Sequential Write 532 -> 4078
Random Write 85422 -> 68517

I am running Windows 10 Pro, Samsung 850 Pro 1 TB, Samsung Magician 4.7

Here is the hack: all it does is in the running process enable the Rapid Mode that is disabled. It makes no change to executable or any other files.

1) Download and install the latest version of ProcessHacker2 - Overview - Process Hacker
2) Open Samsung Magician and navigate to the Rapid Mode tab
3) Run ProcessHacker2 as Administrator then find and select the Samsung Magician.exe process in ProcessHacker2, right click and select Miscellaneous -> Windows
4) Search for the item listed with Samsung Magician as the text
5) Drill down and expand MDIClient
6) Find the first item SCort_ChildFrame that is not grayed out and expand it as well as it's SCort_SAT_View item
7) Right click on the Button with the text Enable and select Enabled
8) Click the Enable button in Samsung Magician!

link to the original post and thanks to the poster Steve Framstad, on page 4 in my browser (shows some screen shots there):
Samsung Magician software doesnt recognize Windows 10, wont - Microsoft Community

Answer:Another Fix that works with Samsung Magician 4.7

Already covered here - Samsung Magician see post # 49.

3 more replies
Relevance 68.47%

Samsung Magician 4.9 Released






New in Version 4.9

- Magician version 4.9 features a number of improvementsover version 4.8:

- New model support: Samsung 750 EVO SSD





Samsung download links:

Samsung 4.9 software

Installation Guide

Alternate MajorGeeks link:

Samsung SSD Magician 4.9

Answer:Samsung Magician 4.9 Released

Originally Posted by IownAmoneyPit


Samsung Magician 4.9 Released



Samsung download links:

Samsung 4.9 software

Installation Guide

Alternate MajorGeeks link:

Samsung SSD Magician 4.9



This is OLD news, version 4.9 was released about 2 weeks ago....or more.

5 more replies
Relevance 68.47%

Is tere any utility like Samsung Magician for T440s built in Samsung SSD? I've read somewhere that Lenovo builds T440s with Samsung 840 however I am not 100% sure. Tried installing Magician but unfortunatelly many features are not available. Thanks.

More replies
Relevance 68.47%

Samsung has updated their SSD tweaking software.
Samsung SSD software page
Download
User Manual
New in Version 4.7

Magician version 4.7 features a number of improvements over version 4.6:New model support: 850 PRO 2TB, 850 EVO 2TBAdvanced Performance Optimization support for 840 EVO mSATANew firmware is required to use Advanced Performance OptimizationMinor bug fixes

Source

Answer:Samsung Magician 4.7 Released

Download limit exceeded. What a joke.

37 more replies
Relevance 68.47%

I did not like Samsung Magician 5.0 so I uninstalled it completely and installed Magician 4.9.7
I like this older version, more "options", easy to work with.
On one page they asked if I want OVER PROVISIONING, I chose "Set OP", it created a 47.69 GB "unallocated" partition.
It is not formatted. Should I format it or just leave it alone ??

Answer:Samsung Magician 4.9.7 Over Provisioning

Leave it alone.

9 more replies
Relevance 68.47%

I have ordered a Samsung 840 EVO SSD and will be installing it in a few days. While looking at the manuals on Samsung's support page, I was reading the procedures for using the Magician software. After the system requirements, which my system is well over the minimums, there is a section on Driver Support. In this section, the table says that AMD chipsets are not supported.

What does this mean? I have an ASUS mobo with an AMD FX990 chipset running an FX-4300 CPU. What will not work - the Magician software, the 840 EVO SSD, or what??? I've seen plenty of reviews of this SSD and never seen any reference to not being compatible with an AMD system.

Thanks for any clarification on this.

Answer:Samsung Magician driver

I've not heard this before but you should be fine. I have a 840 running in my 990fxa/8350 no problems. I installed the magician software without issue. I have used the software and I had trouble with the auto firmware update, that's the only AMD compatibility issue I know of. Very minor technicality.

9 more replies
Relevance 68.47%

Samsung Magician 4.9 Released






Quote:
New in Version 4.9

- Magician version 4.9 features a number of improvementsover version 4.8:

- New model support: Samsung 750 EVO SSD




Samsung download links:

Samsung 4.9 software

Installation Guide

Alternate MajorGeeks link:

Samsung SSD Magician 4.9

More replies
Relevance 68.47%

if you did a clean install of the latest windows 10 version Samsung magician will shot ahci disabled
but if you just updated it will be ok

I just want to khnow for people for did a clean install does magician still show ahci disabled
or they fixed it ?

More replies
Relevance 68.47%

if you did a clean install of the latest windows 10 version Samsung magician will shot ahci disabled
but if you just updated it will be ok

I just want to khnow for people for did a clean install does magician still show ahci disabled
or they fixed it ?

Answer:does samsung magician still not working ?

I did a clean install of Windows 10 Pro x64 and Samsung Magician (4.9.7) works normally with AHCI showing enabled.

4 more replies
Relevance 68.47%

Their servers have a metered connection.
Tool & Software | Download | Samsung V-NAND SSD

New Features
New Samsung Magician features a number of improvements over version 4.9.7
? Completely redesigned and more intuitive user interface
? New Models support : Samsung SSD 960 PRO, 960 EVO
? System Compatibility guide
? SSD model specific feature installation system : only required feature components are
installed and updated

Systems: Windows 7/8/10

The following Samsung SSDs are supported:*
Samsung SSD 960 PRO(M.2)
Samsung SSD 960 EVO(M.2)
Samsung SSD 950 PRO(M.2)
Samsung SSD 850 PRO
Samsung SSD 850 EVO
(2.5?, mSATA, M.2)
Samsung SSD 840 PRO
Samsung SSD 840 EVO(2.5?, mSATA)
Samsung SSD 840 Series
Samsung SSD 830 Series
Samsung SSD 750 EVO
Samsung SSD 470 Series
(*Some features may not be supported for all models.)

Rapid Mode is disabled to install. Last time they did this RM wouldn't enable.
Update at your own risk.

More replies
Relevance 68.06%

bit locker drive encryption failed to recover from an abruptly terminated conversion
i have 2tb segate hd i have stoped  encryption on 94% and shut-down pc now im getting this message 'bitlocker drive encryption failed to recover from an abruptly terminated conversion' while unlocking hd what to do? i will get my data?........please
help me

More replies
Relevance 67.65%

Initially I found that BitLocker on the Go supported removable media like flash drives and external drives. Why isn't a CD/DVD supported since it is considered removable media? Will this support be available in future releases?

Answer:Will BitLocker or BitLocker on the Go ever support CD/DVD encryption?

Hi,
 
Bitlocker to Go is not supported on CD/DVD. Your suggestion is valuable, I will forward this information to the appropriate department through our internal channel.
Both the Microsoft Product Team and Development Team will take into consideration all suggestions and feedback for future releases.
 
Currently, you may need third party software to encrypt CD/DVD.
 
Best Regards,
Niki
 
 Niki Han
TechNet Community Support

3 more replies
Relevance 67.65%

Hi all, Just had a quick question - I have two Samsung SSD 840 EVOs. One for my OS and one for my Flight Simulator X install. The SSD comes with the Samsung Magician software that offers a range of features. I was just wondering if anyone took advantage of these features to optimize their SSDs? I'm looking at the Perfomance Optimization, OS Optimization, Over Provisioning, and RAPID mode features. I wouldn't be totally honest if I said I knew what all those features did. Just wanted to see what others have done. Also, on a related-note: every time I boot my PC and log in, I get a message basically saying Samsung Magician needs Admin rights in order to run and I should relaunch the application with admin rights. For security, I run as a standard user and have a separate Administrator profile when needed. Is there any way to keep Samsung Magician from running on startup? I've read from numerous places that it is not required to startup with Windows, however, it is not listed in the msconfig.exe Startup tab? Thank you for your help. As always, it is greatly appreciated!

Answer:Samsung Magician software for SSDs?

Quote:





Originally Posted by GLaDOS


Hi all, Just had a quick question - I have two Samsung SSD 840 EVOs. One for my OS and one for my Flight Simulator X install. The SSD comes with the Samsung Magician software that offers a range of features. I was just wondering if anyone took advantage of these features to optimize their SSDs? I'm looking at the Perfomance Optimization, OS Optimization, Over Provisioning, and RAPID mode features. I wouldn't be totally honest if I said I knew what all those features did. Just wanted to see what others have done.




I have it installed on my laptop - bout all I really have it installed for is if there's any firmware updates, it'll notify me of them. Otherwise I've only used it to run a few benchmarks through it.


Quote:




Also, on a related-note: every time I boot my PC and log in, I get a message basically saying Samsung Magician needs Admin rights in order to run and I should relaunch the application with admin rights. For security, I run as a standard user and have a separate Administrator profile when needed. Is there any way to keep Samsung Magician from running on startup? I've read from numerous places that it is not required to startup with Windows, however, it is not listed in the msconfig.exe Startup tab? Thank you for your help. As always, it is greatly appreciated!




Check your Startup folder if there's a shortcut there:
C... Read more

3 more replies
Relevance 67.65%

Hello,

Running W10 pro on a desktop PC with two Samsung SSD EVO850 drives. Samsung Magician is installed and Over Provisioning is set on both SSD's. I have also set the OS Optimisation options and Rapid mode on the boot drive in Magician.

If I use CCleaner to disable Magician in the start up programs list, will I lose these apparent benefits, or can I safely disable Magician in Start Up programs?

Theory - I will seldom if ever use Magician after making these settings so it is merely wasting resources if it is just loading every time I start the PC for the heck of it.

Thanks in advance.

Answer:Samsung Magician - Start up option

You'll be ok. It will just disable the system try icon from loading at startup. You will then just need to go to all apps menu if you need to open it, to do anything.

3 more replies
Relevance 67.65%

I'm trying to get everything right this time. I have been doing a clean install of windows 8.1. So far so good thanks to your help. Now I've got all the motherboard, Sound card, Video Card, Asrock, drivers installed from disk and updated. I've gone through the windows update. All cool. Made a restore point, and Now just installed Eset Smart Security 7. Now I see that I haven't installed Samsung Digital Magician that came with the SSD 840 EVO. Should I install this now before I go any further? I know that I installed it on my first complete install in April, but of course I screwed up with a refresh a few days ago, then finally I just did a clean install last night of Windows 8.1. My next step was to Install Acronis and slowly adding all my software to get me going again.

Answer:Samsung Digital Magician for 840 EVO when to install?

It's not required but sort of nice to have. Install it at any time.

I installed it when I first added my Samsung SDD 840 EVO 250GB then uninstalled it once everything was running good. I reinstalled it again a few weeks back to check something and decided to leave it installed. Just ran it now and it updated to ver 4.4.No need to allow it to auto-start though. Just delete the link in your Startup folder once it's installed.

4 more replies
Relevance 67.65%

SAMSUNG MAGICIAN just released version 5.0

Answer:SAMSUNG MAGICIAN version 5.0 just released

Samsung released that version (5.0) back in late November 2016.
Why you think it was just released?

8 more replies
Relevance 67.65%

I have a Samsung 840 SSD installed in my W520.  When I try to install the Samsung Magician 4.0 firmware manager, I get the following error box: "INSTLALATION CANNOT CONTINUE: Windows Management Instrumentation service is disabled.  Please enable and try again" But when I go to Windows services, the service is running.  I get the same error running as Administrator.  Any ideas?

Answer:Cannot install Samsung Magician 4.0 for SSD on W520

The Performance counters have become corrupted. Try the following to fix the issue:
 

Run Command Prompt as Administrator
Type lodctr /r  to rebuild the performance counters

9 more replies
Relevance 67.65%

I recently installed a Samsung 840 EVO 500GB SSD. I checked first off and TRIM is on. However, when I run the Magician it tells me that my OS(7 x64) doesn't support TRIM. Is it telling me that it doesn't now because Samsung is in charge? Any ideas? Thank you.

Answer:Samsung Magician and TRIM message

See this page for instructions on checking if TRIM is enabled in Windows 7 (use the fsutil method):

Verify That TRIM Is Enabled In Windows 7 | gHacks Technology News

About Samsung "Magician", it purposely interferes with sleep and should NEVER be left running. It's easy to miss, hidden in the notification area as it will be when you close the program. (That's why the default should be "always show" for new icons.) I wrote about the BSOD it caused me here, which was the first BSOD I've seen in several years:

It was a strange day - BSOD, Samsung Magician, Intel RST, hybrid sleep... - [H]ard|Forum

After you finish with it, visit the system tray and close it through its icon. It does not install drivers or leave any services running, so it's safe to use as long as you remember to close it for real. Here are a couple of supporting messages about Magician and sleep, both occurring in threads where people discuss BSODs and attribute it to "Magician":

[SOLVED] ntoskrnl.exe - Tech Support Forum
Samsung SSD Magician - Overclockers UK Forums

Now if you take the Samsung claims about sleep seriously, I'd recommend secure-erasing the drive and exchanging it for something else.

The only reason I have to run Magician is to use its optimizer function, which does a manual TRIM, which I find necessary to do immediately after encrypting a system drive with TrueCrypt. While TrueCrypt doesn't block TRIM on partitions within the scope of system encryption... Read more

3 more replies
Relevance 67.65%

There is a new version of Samsung Magician software, version 4.3, which I discovered when I ran the program today.

The new version has provision to enable "Rapid Mode" on Samsung 840 Pro series SSD's which I think was only previously available on the EVO series.

This may be of interest to those that are running 840 pro series SSD's.

Answer:New version of Samsung Magician software.

Actually I am running EVO's Ranger so I will try that when I get up tomorrow

2 more replies
Relevance 67.65%

Hello,

Running W10 pro on a desktop PC with two Samsung SSD EVO850 drives. Samsung Magician is installed and Over Provisioning is set on both SSD's. I have also set the OS Optimisation options and Rapid mode on the boot drive in Magician.

If I use CCleaner to disable Magician in the start up programs list, will I lose these apparent benefits, or can I safely disable Magician in Start Up programs?

Theory - I will seldom if ever use Magician after making these settings so it is merely wasting resources if it is just loading every time I start the PC for the heck of it.

Thanks in advance.

Answer:Samsung Magician - Start up option

You'll be ok. It will just disable the system try icon from loading at startup. You will then just need to go to all apps menu if you need to open it, to do anything.

1 more replies
Relevance 67.65%

Can anyone please tell me how do I turn the defrag and optimize back on?

I need some help.
I am running Win 8 Pro.
My set up has 2 x 650 GB WD Black hard drives and a Samsung 840 (non pro) for the boot drive.

I have run the latest Samsung Magician, however the BIG problem is that it has stopped the windows 8 Defrag program.

I reinstalled Win 8 and all was OK, (now for the bit about me being thick -- ) I thought I would try the old version of Samsung Magician, and Bu**er me if has not only done the same thing again, turned off defrag and optimize, I am just unable to open defrag in order to defrag my WD drives.

I do not really want to reinstall Windows 8 again unless I have to, so I am keeping my fingers crossed that someone knows how to switch defrag bag on again.

Thanks in advance
Syd

Answer:HELP - Samsung Magician has stopped defrag

Hi there
Don't DEFRAG an SSD --just THINK for a minute --what does defrag attempt to do. It basically tries to re-arrange the files so the bits of it are all next to each other rather than spread all over the disk.

This is 100% irrelevant in SSD's since there are NO moving parts so access time in spinning the disk to read all the bits of the file into storage is NOT an issue with an SSD.

In fact these days it's rarely if ever necessary to defrag a spinner either --just back it up (image it) with something like Acronis and restore it again. Unless you are deliberately doing a sector by sector dump and restore the disk will be "re-arranged" automatically by the restore program.

Cheers
jimbo

3 more replies
Relevance 67.65%

I just upgraded Magician to v4.3.
It's the first time I've looked at the program in many months. I made some choices when I first installed the SSD, but I'm wondering about some of these now.

Program: Do you allow Magician to run at startup? Reasons?

Over Provisioning: Do you enable this? Why?

Rapid Mode: Do you enable this? Why?

Firmware Update: Do you bother doing a full backup before updating the firmware?

Thanks for any instruction or opinions.

Answer:Questions for Samsung Magician users

I'm glad you asked those question.
I can't give you answers but I do have a Samsung ssd coming and that information should be handy to all Samsung ssd users.

9 more replies
Relevance 67.24%

Hi Mr/Ms
I
flash
drive encrypted
with BitLocker 
I used
this
driver for three months my computer is broken I bought a new computer    when i was try my flash disk new computer its give me this  problem 
BitLocker Drive Encryption failed to recover from an abruptly terminated conversion. This could be due to either all conversion logs being corrupted or the media being write-protected
? know my passworrd but I do not know
the BitLocker
recovery key what can i do know pls some one help me 

More replies
Relevance 66.83%

downloaded samsung magician and installed it. it started up and apparently i need some sort of digitally signed driver now?

"program compatibility assistant"

"samsung magician application resource
samsung india software operations

windows blocked installation of a digitally unsigned driver. uninstall the program that uses the driver, and control releasers website to get a signed version of the driver"

Answer:samsung magician need digitally signed driver

You don't need Magician for the drive to work just fine. You may not get all the advanced features, but the drive will be plenty fast.

1 more replies
Relevance 66.83%

So I installed my new SSD, set up all my programs and files, and was having some trouble with discovering an ACHI drivers (which apparently cannot be achieved on my dell latitude model IDE ATA/ATAPI driver missing?)

Anyway after installing the Samsung Magician software to help optimize the SSD, it said that a firmware update was available, so upon updating I was rewarded with a BSOD after restarting. I became angry and did a system restore with my image disk and started over. This time in the samsung magician it said the firmware was already up to date so I didn;t think anything of it until today another BSOD. If I have to do another reinstall I will take my own life, so I hope someone can help me here.


Attachment 311734

Answer:BSOD After Samsung magician (840 pro SSD) Firmware update

Do you use the DW1520 Wireless-N WLAN Half-mini card?
If so then it looks like the driver for it is the problem.

Do you have a spare HDD that you can use because I think the driver for it is incompatible with SSDs. I will need to double check.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {10, 2, 0, fffff80002ea4ec9}

Probably caused by : tcpip.sys ( tcpip!IppValidatePaths+71 )

Code:
fffff880`04a8f000 fffff880`04f12000 bcmwl664 (deferred)
Image path: \SystemRoot\system32\DRIVERS\bcmwl664.sys
Image name: bcmwl664.sys
Timestamp: Fri Jan 07 08:05:56 2011 (4D26C964)
CheckSum: 0048C1C3
ImageSize: 00483000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
It doesn't mention compatibility with SSDs. I will keep looking. Here's the website anyway.

Driver Details | Dell US

2 more replies
Relevance 66.83%

friends I'm installing a fresh samsung 840 120gb. i thought i could put the ssd on sata 1 [not zero] and get firmware via magician on my windows 8 lab mule. no dice. apparently magician ONLY wants to see the ssd on sata zero. it can pull up the drive, but none of the controls work.
soooo... I'm thinking I'm going to have to go with the drive 'as is' to install 7 on a notebook, then as first order of business go pickup the firmware update and execute it.

will this result in sub-par arrangement? best I can tell the fw update is non-destructive.
is there another way?

Answer:samsung ssd: will firmware update harm anything? magician no use.

friends i have a new samsung 840 to replace a failing drive in a hp notebook.
i wanted to update the samsung firmware first, then do the install of windows 7 x64 but using the samsung so-called Magician, trying the drive on sata 1 [instead of 0] it still cannot properly register the drive. all I get is the SMART info - everything else is neutered. illogical... how does samsung want to update firmware? AFTER the os is installed?
a little guidance would sure be appreciated.

8 more replies
Relevance 66.83%

I installed the Magician. I did NOT get the Advanced tab on the Performance Optimization. Not sure what's up with that. Can't be bothered during the week, will look into it this weekend.

Samsung Magician 4.6 and 840 EVO EXT0DB6Q Firmware Review - Finally Fixed

Samsung Magician 4.6 and 840 EVO EXT0DB6Q Firmware Review - Finally Fixed | Firmware Update and Samsung SSD Magician 4.6 Added Features

New Samsung SSD 840 EVO Read Performance Fix Coming Later This Month

New Samsung SSD 840 EVO Read Performance Fix Coming Later This Month

A Guy

Answer:Samsung Magician 4.6, 840 EVO Read Performance Fix Coming Later...

I don't have the Advanced tab on my Magician either.

My version is Product Version 4.5.1.0 & the File Version is 4.5.1.65. So far I have not received an update but it may come through soon.
I found the product Version by Right Clicking on the Magician short cut on my Desk Top & select Open File Location which should show the Samsung Magician Application, Right Click on that & select Properties then select the Details Tab & it will show the Version.

2 more replies
Relevance 66.83%

I had 91gb. free on 840 120gb. model but, after messing with the magician software and updating the firmware, I now have 79gb. free and I have no backups on the drive I keep an image backup on an external usb drive. Any help with this problem would sure be appreciated.

Answer:lost disc space while using samsung magician?

Entered trim cmd. and got it back!

6 more replies
Relevance 66.83%

For several months, I have had Samsung Magician 4.97 installed on my P70's Windows 7 and Windows 10  boot drives -- both are original Lenovo-suppled and installed 512 GB Samsung NVMe drives.  This utility offered limited functionality, simply recognizing the drives and allowing them to be benchmarked, tested and described but nothing else.  No ability to update firmware, adjust caching or over-provision the drives.  Moreover, Lenovo has previously not responded to my posted queries regarding how to update the firmware on these units, as they are out of sync -- one of the devices has a much older rev. level than the other and I dare not try to set-up a RAID array under these conditions. I was hoping the newly released Ver. 5.00 of Magician would remedy this.  However, circumstances have become worse, as the utility does not even "see" the two NVMe drives. Does anyone else have experience with 5.00 or a potential fix to the firmware update issue?  Any insights or opinions would be appreciated.  





______________________________________________P70, Xeon 1505 CPU, 64 GB ECC RAM 2 x PCIe NVMe 512 GB Drives, 1 TB HDD, DVD-RW, 4 K Display, NVIDIA Quadro M4000W700 model 2757-CTO (8 GB RAM, Crucial MX-100 SSD + Hitachi TravelStar 1 TB 7200 RPM Drives, Bluray R/W, NVIDIA Quadro FX3700M, WUXGA); Windows 7 Ultimate SP-1, W700 Mini-Dock

More replies
Relevance 66.83%

I am getting "This program cannot be installed on Windows NT version 6.1 Service pack 5 or later." When I try to run the update for my Samsung 830 SSD. Is anyone else having this issue at all?

Answer:Samsung SSD Magician Software Version 3.2 error

same here.. i guess its not working for win8 yet..

2 more replies
Relevance 66.83%

downloaded samsung magician and installed it. it started up and apparently i need some sort of digitally signed driver now?

"program compatibility assistant"

"samsung magician application resource
samsung india software operations

windows blocked installation of a digitally unsigned driver. uninstall the program that uses the driver, and control releasers website to get a signed version of the driver"

Answer:samsung magician need digitally signed driver

You don't need Magician for the drive to work just fine. You may not get all the advanced features, but the drive will be plenty fast.

9 more replies
Relevance 66.83%

Samsung Magician can't recognize the SATA 3 and AHCI mode. When I checked the Event Viewer I got an error saying that "Magician SATA Reader fail". How to fix this? Is it because of drivers or hardware problem? Specs below.

Intel Core i7 6800K
Corsair H110i GT
Asus ROG Strix X99 Gaming
Corsair Vengeance LPX 16GB (4x4GB) 3200MHz CMK16GX4M4C3200C16
Samsung 850 EVO 500GB
Seagate Barracuda 3TB
Sapphire Radeon R9 270X
NZXT H440
EVGA SuperNOVA P2 850W

More replies
Relevance 66.83%

Just wanted to post a PSA warning for Firmware Updates through Magician, some are breaking SSD Drives, its been going on for at least a month with no resolution from Samsung yet except to RMA broken Drives which now stutter and Pause during use , apparently the Firmware can't be downgraded from my reading but I have not tried it personally ....

so DO NOT install the latest Firmware offered by Magician, especially on the latest 960 Evo or Pro Drives , without Checking the Samsung Forums 1st ..... they are having to RMA Drives currently broken by the latest 3B7Qxxxx Firmwares....
these firmware's are only available though Magician not from the Download site currently.

I don't personally have anymore Information for you , those "in the know" please add anything you can on the Matter, thx.

Memory & Storage - Samsung Community

More replies
Relevance 66.01%

I installed Samsung Magician along with my new 850 EVO, and it was going great until I decided to DeFrag my secondary HDD. It says this:



This is even after uninstalling Magician.

Please help! I really want to get this working.

More replies
Relevance 66.01%

I have an SSD with the Samsung Magician 4.9.5 software. I am a Windows Insider on the Fast Ring so you all know how often we get updates. Recently I opened this software to check that it was set up correctly, in the past there were things that would change on an update.
When I opened it up under the new build 14267 I saw this:

If you notice the Health Status is blank. Furthermore the state of "Smart" showed this:

This shows there are problems with the drive. I ran CrystalDisk and a few other programs and found out the drive was OK.

I then decided to rebuild the computer and go back to the last ".iso" build 10586 1511 (111215). I reinstalled Samsung Magician 4.9.5. and these were the results:
After the rebuild I haven't changed this to "Get Insider Builds" through windows update. I wanted to post this and see if others ran into this before I start the update process. I am going to try and narrow it down to the upgrade that broke this software.

Answer:Samsung Magician 4.9.5 - Not Working Win10 build 12467

This is why I don't use Insider on my main desktop but test it in vmware instead.

You could try uninstalling Magician, run ccleaner, then install 4.9 and then 4.9.5 over it. Magician is working fine for me in Stable Windows 10.

1 more replies
Relevance 66.01%

I have an SSD with the Samsung Magician 4.9.5 software. I am a Windows Insider on the Fast Ring so you all know how often we get updates. Recently I opened this software to check that it was set up correctly, in the past there were things that would change on an update.
When I opened it up under the new build 14267 I saw this:

If you notice the Health Status is blank. Furthermore the state of "Smart" showed this:

This shows there are problems with the drive. I ran CrystalDisk and a few other programs and found out the drive was OK.

I then decided to rebuild the computer and go back to the last ".iso" build 10586 1511 (111215). I reinstalled Samsung Magician 4.9.5. and these were the results:
After the rebuild I haven't changed this to "Get Insider Builds" through windows update. I wanted to post this and see if others ran into this before I start the update process. I am going to try and narrow it down to the upgrade that broke this software.

Answer:Samsung Magician 4.9.5 - Not Working Win10 build 12467

This is why I don't use Insider on my main desktop but test it in vmware instead.

You could try uninstalling Magician, run ccleaner, then install 4.9 and then 4.9.5 over it. Magician is working fine for me in Stable Windows 10.

20 more replies
Relevance 65.6%

Not sure why this happened, but got a BSOD when running the benchmark I've run several times before as I've tweaked my new build. Any insight that can be provided would be appreciated.

More replies
Relevance 65.6%

Hi all,
I have a lovely Dell Precision T7600 that is still quite the beast. It's got a Samsung EVO 850 as the main OS drive. It boots up fine as I currently have cleared my RAID configuration and I will perhaps redo that at some point (it's not critical). Anyway, I want to run Samsung's Magician software but it can't see the drive...
Anyone else have this experience or these difficulties?

Answer:Dell Precision T7600 upgraded with Samsung EVO 850 SSD - Magician can't see drive

I have a PC with a Samsung EVO 850 (1 TB) and a Samsung EVO 840 (500 GB) and the Magician finds them without problems.  Actually, the Magician finds all the drives, SSD and conventional hard drive.
However, other than to check the "health" of the drives and firmware version, I don't find anything else useful.  There was a discussion about the Magician on the tenforums.com and that was the general consensus there.
However, the drive should be detected.  Are you using the latest Magician Version?  5.0.0
Two suggestions, run as "Administrator" (even if you are the Administrator) and if that doesn't work, uninstall the Magician program, RESTART THE PC, then reinstall it.

1 more replies
Relevance 64.78%

Widespread bug FYI - https://forums.whirlpool.net.au/foru....cfm?t=2556634 - see UPDATE paragraph at bottom!
Just after I updated my Asus laptop from Windows 10 1511 to Windows 10 1607 (1 year anniversary update) a virus was detected by Windows Defender, so I immediately shut down and performed a reformat via Windows-10-install USB stick, as I was going to reformat anyway. I wish I noted down now what it detected because i've had an issue since.
Samsung Magician v4.9.7 now reports 'AHCI mode disabled/deactivated' and 'unable to detect SATA' (I use a Samsung 850 PRO SSD). After much testing, I found what makes it report this is when in my Asus laptop UEFI BIOS I have 'secure boot' enabled. When secure boot in BIOS is disabled, AHCI mode and SATA detect reports working normally again.
Screenshots:
Error - AHCI disabled/deactivated and SATA not detected/EUFI BIOS secure boot enabled - Imgur: The most awesome images on the Internet
No error - AHCI enabled and SATA detected/UEFI BIOS secure boot disabled - Imgur: The most awesome images on the Internet
I've tried many MBR fixes via command line via repair your computer when booting from Windows install USB but it seems after much reading that my UEFI laptop uses something different and I can't modify it?
I have secure boot enabled whenever the laptop might be online so it would have been enabled when the virus alert popped up, so in theory the boot sector should have been protected?
So i'm not sure if I might have an i... Read more

More replies
Relevance 64.78%

windows 10 version 1607
after clean install ?
Samsung magician 4.9.7

Answer:does samsung magician show ahci disabled with signed driver error on

Does on mine, even though speccy etc all show it being on, must be a magician error.

14 more replies
Relevance 64.78%

Widespread bug FYI - https://forums.whirlpool.net.au/foru....cfm?t=2556634 - see UPDATE paragraph at bottom!
Just after I updated my Asus laptop from Windows 10 1511 to Windows 10 1607 (1 year anniversary update) a virus was detected by Windows Defender, so I immediately shut down and performed a reformat via Windows-10-install USB stick, as I was going to reformat anyway. I wish I noted down now what it detected because i've had an issue since.
Samsung Magician v4.9.7 now reports 'AHCI mode disabled/deactivated' and 'unable to detect SATA' (I use a Samsung 850 PRO SSD). After much testing, I found what makes it report this is when in my Asus laptop UEFI BIOS I have 'secure boot' enabled. When secure boot in BIOS is disabled, AHCI mode and SATA detect reports working normally again.
Screenshots:
Error - AHCI disabled/deactivated and SATA not detected/EUFI BIOS secure boot enabled - Imgur: The most awesome images on the Internet
No error - AHCI enabled and SATA detected/UEFI BIOS secure boot disabled - Imgur: The most awesome images on the Internet
Samsung driver not digitally signed error that began at same time - Imgur: The most awesome images on the Internet
I've tried many MBR fixes via command line via repair your computer when booting from Windows install USB but it seems after much reading that my UEFI laptop uses something different and I can't modify it?
I have secure boot enabled whenever the laptop might be online so it would have been enabled when the vir... Read more

Answer:Widespread AHCI issues in Samsung Magician since Win10 1-year update

I'm running the anniversary update with a Samsung 850 Pro and Magician 4.9.7, and I haven't had any issues whatsoever.

22 more replies
Relevance 64.78%

Widespread bug FYI - https://forums.whirlpool.net.au/foru....cfm?t=2556634 - see UPDATE paragraph at bottom!
Just after I updated my Asus laptop from Windows 10 1511 to Windows 10 1607 (1 year anniversary update) a virus was detected by Windows Defender, so I immediately shut down and performed a reformat via Windows-10-install USB stick, as I was going to reformat anyway. I wish I noted down now what it detected because i've had an issue since.
Samsung Magician v4.9.7 now reports 'AHCI mode disabled/deactivated' and 'unable to detect SATA' (I use a Samsung 850 PRO SSD). After much testing, I found what makes it report this is when in my Asus laptop UEFI BIOS I have 'secure boot' enabled. When secure boot in BIOS is disabled, AHCI mode and SATA detect reports working normally again.
Screenshots:
Error - AHCI disabled/deactivated and SATA not detected/EUFI BIOS secure boot enabled - Imgur: The most awesome images on the Internet
No error - AHCI enabled and SATA detected/UEFI BIOS secure boot disabled - Imgur: The most awesome images on the Internet
Samsung driver not digitally signed error that began at same time - Imgur: The most awesome images on the Internet
I've tried many MBR fixes via command line via repair your computer when booting from Windows install USB but it seems after much reading that my UEFI laptop uses something different and I can't modify it?
I have secure boot enabled whenever the laptop might be online so it would have been enabled when the vir... Read more

Answer:Widespread AHCI issues in Samsung Magician since Win10 1-year update

I'm running the anniversary update with a Samsung 850 Pro and Magician 4.9.7, and I haven't had any issues whatsoever.

13 more replies
Relevance 64.78%

windows 10 version 1607
after clean install ?
Samsung magician 4.9.7

More replies
Relevance 64.78%

I recently installed a Samsung 840 Pro MZ-7PD512 SSD into my W500 (product Id = 4058CTO, win 7 64bit).The 840 Pro is working perfectly with generic firmware, I think, but every time I run Samsung Magician it crashes with 'c0000005' during its initialisation. The Samsung firmware is normally installed via Magician.I raised a case with Samsung who pointed me to a Site where I could download the firmware which has to be installed as a bootable ISO. I used both Nero Express and Magic ISO to create DVDs but, in each case, when booting my W500 with these DVDs the process ended with the message 'panic: mcb chain corrupted'.Originally I installed the SSD and restored a Win7 image backup to it. So, thinking that the Samsung supplied copy utility may do the trick, I re-installed my old HDD and purchased a USB-SATA cable and attempted to use the Samsung copy utility to populate the 840 Pro. I tried this a number of times and all ended with 'Program not responding' sometimes annoyingly after getting to 100%. So I put the 840 Pro back in  and restored it from my Win 7 backup image. For both the Copy Utility and Magician I tried the version on the supplied CD and the latest version from Samsung's Web site.As I said, the 840 Pro is working perfectly but all my efforts to use the Samsung software have failed.I have done quite a bit of tolling the Net re this and have not found any answers - Magician appears to work fine for most people. Perhaps I should lea... Read more

Answer:W500: Samsung SSD Magician software crashing with exception code 'c0000005'

Have you tried using Acronis True Image (I use the free Western Digital version which works perfectly) to clone the old HDD onto the Samsung SSD?I have had no experience with the Magician software, but every cloning job I've done with Acronis has worked flawlessly.

4 more replies
Relevance 64.78%

Since I have the Raid Setting in Bios I can't Load Samsung's Drive Magician  software due to the Intel RST driver is loaded once I go to ACHI Mode the Samsung drivers can be installed because the default windows drivers will be where intel chipset sata/pcie RST driver was
I searched and they said easy fix follow these instructions. So I Did
Right-click the Windows Start Menu. Choose Command Prompt (Admin).
If you don’t see Command Prompt listed, it’s because you have already been updated to a later version of Windows.  If so, use this method instead to get to the Command Prompt:
Click the Start Button and type cmd
Right-click the result and select Run as administrator
Type this command and press ENTER: bcdedit /set {current} safeboot minimal
If this command does not work for you, try bcdedit /set safeboot minimal

Restart the computer and enter BIOS Setup (the key to press varies between systems).
Change the SATA Operation mode to AHCI from either IDE or RAID (again, the language varies).
Save changes and exit Setup and Windows will automatically boot to Safe Mode.
Right-click the Windows Start Menu once more. Choose Command Prompt (Admin).
Type this command and press ENTER: bcdedit /deletevalue {current} safeboot
If you had to try the alternate command above, you will likely need to do so here also: bcdedit /deletevalue safeboot

Reboot once more and Windows will automatically start with AHCI drivers... Read more

Answer:xps 8920 install samsung 960 Pro M.2 ssd can't load magician software due to RAID setting

See this thread; en.community.dell.com/.../20011828. Apparently there is an updated BIOS that fixes the problem.

1 more replies
Relevance 63.96%

 The windows 10 Pro computer has died, and I would like to put the in my new computer with windows 10 home.   I would like to remove the bit locker password,  so I can reinstall windows 10 pro while keeping my files and apps,  
I'm unable to do this while the drive is encrypted.  How do I remove drive encryption from the drive while I have the drive slaved to a windows 10 home computer? 

More replies
Relevance 62.73%

I am trying to enable BitLocker on a Windows 7 Ultimate x32 system with TPM. I follow the Wizard and when asked to encrypt the drive I select 'Run BitLocker system check' and 'Continue' (see attached sreenshot).
The USB is inserted and contains the recovery key (.txt and .tpm). During reboot I get:

Windows BitLocker Drive Encryption Information
The system boot information has changed since BitLocker was enabled.
You must supply a BitLocker recovery password to start this system.
Confirm that the boot changes to this system are authorized.
If the changes to the boot system are trusted, then disable and re-enable
BitLocker. This will reset BitLocker to use the new boot information.

Otherwise, restore the system boot information.

ENTER=Continue

Windows then continues to start normally. After login I get an error message: BitLocker could not be enabled (see attached screenshot).
When I check TMP it shows as active, initialized and owned.

I've started out from scratch several times - same results. I can't figure out what the problem is.
This is driving me nuts.

Any help appreciated

Thanks

Answer:Bitlocker: BitLocker could not be enabled

BIOS: A06
DELL: d420
Hard drive: System reserved 100MB NTFS, 27.84GB NTFS

TPM
Manufacturer name: BRCM
Manufacturer version: 2.10
Specification version: 1.2
Status: The TPM is on and ownership has been taken

I've since modified the group policy settings for Bitlocker to use a PIN.
I am still getting the same results.
I follow the wizard, select check the system, reboot, enter PIN, get the same "error" messages as shown in my previous post.

This makes no sense.

Any help?

6 more replies
Relevance 62.73%

I am having trouble getting BitLocker enabled. 

The OS is Windows 7 Enterprise and the computer is a Lenovo L512 ThinkPad. I've updated the BIOS to the latest version.  TPM is on.  There are two partitions - System Reserved - 102 MB - NTFS and C - 232.78 GB that show up in Disk Management.
There are two files on the USB, a .tpm and a BitLocker Recovery Key.
When I click on Run BitLocker system check I'm told to insert the USB memory device containing the recovery key.  I do that and see the message that the computer must be restarted. 
After restarting I receive this message:
BitLocker could not be enabled.  The BitLocker startup key or recovery password cannot be found on the USB device.  Verify that you have the correct USB device, that the USB device is plugged into the computer on an active USB port, restart the
computer, and then try again.  If the problem persists, contact the computer manufacturer for BIOS upgrade instructions.  C: was not encrypted.
I've tried the USB drive in every port on the computer with no luck.
Perhaps there's something minor that I'm missing.  I'd appreciate any assistance.
Thanks!

Answer:BitLocker could not be enabled.

I figured out my mistake. 
I had set the BIOS boot order to only HD, as I usually do.  I did not realize that USB drive (now the second option in the boot order) needed to be enabled for the encryption process to continue. 
I've tried the encryption process on two computers, and it worked fine after this.
Thanks for the suggestions.

5 more replies
Relevance 62.73%

Trying to start Bitlocker and to encrypt a partition, windows gives me the advices to restart an then comes up with the attached error. Who knows how to fix it?

Answer:Bitlocker could not be enabled

  
Quote: Originally Posted by Henning


Trying to start Bitlocker and to encrypt a partition, windows gives me the advices to restart an then comes up with the attached error. Who knows how to fix it?


Henning hi and welcome

It tells you in the error to use the Bitlocker recovery to verify the drive. Was the drive changed by you? di you have a AV current and running?

Ken

3 more replies
Relevance 62.73%

Hi there,



I'm evaluating the 90 day RTM of Windows 8 Enterprise and want to to enable full disk encryption (partitions are stock, c:\ only, didn't create any manually). Unfortunately, Windows won't let me. I own a Dell D630 with built-in v1.2 TPM chip. When starting
the system check (just before the start of the encrypting process) I get the following error message:

Bitlocker could not be enabled 

The Bitlocker encryption key cannot be obtained. Verify that the Trusted Platform Module (TPM) is enabled and ownership has been taken. If this computer does not have a TPM, verify that the USB drive is inserted and available.

C: was not encrypted.



I had a look in tpm.msc and the status displays "The TPM is ready for use". While looking for a solution in the web, I came across several screenshots of tpm.msc where the status was displaying "The TPM is ready
for use and ownership over TPM has been taken". Well this relates pretty well to the error message in the first place. 


Technet (technet.microsoft.com/en-us/library/cc754215.aspx) even has detailled instructions online on taking ownership of your TPM module. Apparently, I need to initialise TPM as per the instructions. The problem is, I don't even
have an initialise option available in the right-hand side action menu of tpm.msc.



Well - I thought - if TPM behaves badly then just disable it and follow these Technet instructions ... Read more

Answer:Bitlocker could not be enabled (with/without TPM)

Hi.
This didnt work either, unfortunately... 
However, after deactivating the TPM altogether in BIOS, so that tpm.msc is not even "aware" of an installed TPM chip, I was able to initiate the encrypting process.
Cheers

3 more replies
Relevance 62.73%

Hi 
I am trying to turn on the bitlocker using manage bde by command prompt but it is showing an error 0x80070057 so how can i proceed or fix this problem?

More replies
Relevance 62.73%

How do I encrypt my Extrenal HDD with BitLocker as I don't get any direct options for encrypting the drive?
Also, is there any option to encrypt the drive without formatting because I don't want to lose my data

More replies
Relevance 61.91%

Hi,

I have been having some issues when trying to turn Bitlocker on in C:

I have followed the instructions as per this forum to enable a Startup key in gpedit.msc as I dont have TPM which worked.

After following the instructions, Windows Bitlocker asked me to insert a USB to save the startup key to. This appeared to save and then moved onto the next step where I took down the recovery key etc... and finally restarted to make sure my system was compatible before encryption started.

Upon restart, Windows said that it couldnt find a key on the USB drive. After further investigation I found that windows did not save the key to the USB after all even checked as a hidden file. It will save the text file (recovery key) to usb but not the bek file for the startup key.

I have tried this several times but each time it wont save although the system dosent say there has been a problem and moves on to the next stage.

The USB is a 2gb cruzer with the smart drive software removed and re-formatted to NTFS. I have also tried this on other USB drives with no luck and the USB drives work as Iam able to write other things to it?

Any help would be greatly appriciated as I have searched this forum and MS forums with no luck.

Thanks
Marc

Answer:Bitlocker Drive Encryption using USB

Same problem here. Different USB drives or different usb ports didn't change anything.

Any ideas?

9 more replies
Relevance 61.91%

Hi all

bare with me on this, it may sound stupid and have a very simple answer.

I've got a laptop which I currently have Symantec Desktop Encryption installed with C:/ encrypted.
Personally not quite sure if the files it self on C:/ are encrypted or not (I'm able to access my laptop which has the drive encrypted, over the network from my desktop without any issues/error messages to say its encrypted etc)

This is where the possible stupidity comes in. Symantec current has the drive encrypted (Enter password before booting to Windows), but I was wondering if the data it self is encrypted and if not, would it be possible to do this within Symantec (Cant seem to find a way) if not, would Bitlocker be a solution to encrypting the data or will this cause confliction?

On the side as well, I know that Windows has an option to show folders/directories in a different color if they are encrypted, this option is enabled, but none of the directories are coloured, any idea how to get this to work?
Thanks in advance
Josh

Answer:Using Bitlocker and Symantec Encryption

If it said encrypted, it really is. For example, someone detached the hard drive from your system and then inserted that to another computer to read the contents. Symantec will notify a password entry and if there's no recovery key, you won't be able to access it. It works like BitLocker To Go. BitLocker Drive Encryption doesn't need a password prompt if the drive is connected to the original motherboard and there's no changes to BIOS settings or updates AFAIK.

3 more replies
Relevance 61.91%

Hey there. I'm having trouble unlocking my external flash drive which was encrypted by me a few months back. It was encrypted using my desktop PC which is not working anymore. I'm trying to unlock it using my laptop.
The problem is, I am entering the correct password but it's marking it as incorrect. I am sure about the password because I had stored it in my phone.

I have a .pfx certificate as well but I really don't know how will it be helpful in unlocking the device. I had saved this .pfx file because while the process of encryption, windows had advised me to save it. Any help will be appreciated. I really need to unlock
this device as the data it contains is irreplaceable.

Regards,
Hannan.

More replies
Relevance 61.91%

Novice Question, folks...
 
If I have already encrypted my data with BitLocker or some other encryption software, will that render ransomware ineffective?  Or, does it mean my already-encrypted data just gets another layer of encryption (i.e., double-encrypted)?  

Answer:Ransomware vs BitLocker (or any other encryption s/w)

Hi there,If your data is already encrypted then a crypto ransomware would just add its own encryption over the data, making it double encrypted as you said.

6 more replies
Relevance 61.91%

I am having a hard time trying to figure out what encryption method and cypher strength is used on my Bitlocker to go encrypted portable hard drive.

I understand the settings for Bitlocker are configured in the Group Policy Editor but besides that is there any way to see what level of encryption your portable drive has.

When I encrypted this drive, I left the Group Policy settings default when encrpyting the drive which means the drive was supposedly encrypted using 128-bit with diffuser.

This would come in handy when trying to prove to someone that the device is infact encrypted with either 128-bit or 256-bit.

Answer:Bitlocker To Go Encryption Level

Hello Doc, and welcome to Seven Forums.

If the computer does not have Group Policy included to look at, then you can edit (right click on REG file and click on Edit) the REG file downloads in OPTION TWO of the tutorial below, then check the registry and compare it to the REG file downloads to see how it set. By default, it is set to 128-bit with diffuser in Windows 7.

BitLocker Drive Encryption - Change Encryption Method and Cipher Strength

Hope this helps,
Shawn

5 more replies
Relevance 61.91%

Hello

Thought I'd ask before I do something stupid
I'd like to encrypt my fileservers with Bitlocker but I wonder how fast it is these days? The servers run Windows 8.1 and when trying on another system I get about 100MB reads and writes during encryption - is this somewhere in the ballpark for performance? Oh and the cpu supports hardware encryption as well

Thanks in advance
Edit:

Just finished encrypting a Raid6 array with 8x2TB drives. Time approximately 24 hours and an average speed of about 125-130MB/sec. Cpu is an AMD A4 5300 dual core cpu. Not so bad imho.
 

More replies
Relevance 61.91%

hi hw r u i want to know abt the drive encryption option in windw 7 i used Bitlocker drive encryption to lock or save my drive data(confidential data) frm others. ques is that this encryptn method is right i mean it will damage my hard disk or not . kindly tell me and if u tell me more methods for protection i really appreciate u.thanks

Answer:Bitlocker drive encryption

It will not damage the HDD just make sure you save the "Key" in a save place not on the computer (A hard copy on paper and a digital copy on a thumb drive two backups of the key is best) also the Windows OS partition or HDD can not be encrypted using Bitlocker.

Set up your hard disk for BitLocker Drive Encryption - Microsoft Windows Help

2 more replies
Relevance 61.91%

I m having problems with bitlocker .... my hard drives are not showing in control panel-->system&security-->Bitlocker Encryption drive .... any help related to this please ?????????????????????????????????????????????????????????

Answer:Bitlocker Encryption drives

Make sure you have ALL of the requirements
Hardware requirements for BitLocker Drive Encryption

7 more replies