Computer Support Forum

Windows 10 update fail with error code with 0x8007001F

Question: Windows 10 update fail with error code with 0x8007001F

This is what happened when I tried Windows 10 update:There were problems during installation of some updates, but we try again later. If problems persist and you want to search the Internet, or contact support to get more information, the following may be helpful: ? IDT - Audio Device - IDT High Definition Audio CODEC - wronge 0x8007001f,My problem:I can not download it! And when i try from the Net to search and find downloads no one HAS the same issue. Please help me!

Relevance 100%
Preferred Solution: Windows 10 update fail with error code with 0x8007001F

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Windows 10 update fail with error code with 0x8007001F

"I can not download it!"Download it from a good computer using > Media creation toolhttp://windows.microsoft.com/en-us/...https://www.microsoft.com/en-au/sof...

3 more replies
Relevance 75.98%

Hi all,
I cannot update to Windows 10 anniversary update. I get the 0x8007001f error code.
Here is the log from C:\$WINDOWS.~BT\Sources\Panther\setuperr.log


Code:
2016-09-08 17:28:05, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Suspend(1066): Result = 0xC1800104
2016-09-08 17:28:05, Error MOUPG CSetupManager::ExecuteInstallMode(735): Result = 0x800705BB
2016-09-08 17:28:05, Error MOUPG CSetupManager::ExecuteDownlevelMode(391): Result = 0x800705BB
2016-09-08 17:28:06, Error MOUPG CSetupManager::Execute(236): Result = 0x800705BB
2016-09-08 17:28:06, Error MOUPG CSetupHost::Execute(372): Result = 0x800705BB
2016-09-08 17:38:30, Error CONX Failed hashing for \??\c:\program files (x86)\norton internet security\nortondata\22.7.0.76\definitions\sdsdefs\20160630.020\eng64.sys, 0x80070003

2016-09-08 17:38:30, Error CONX Failed hashing for [\??\c:\program files (x86)\norton internet security\nortondata\22.7.0.76\definitions\sdsdefs\20160630.020\eng64.sys] 0x80070003

2016-09-08 17:38:30, Error CONX Failed hashing for \??\c:\program files (x86)\norton internet security\nortondata\22.7.0.76\definitions\sdsdefs\20160630.020\ex64.sys, 0x80070003

2016-09-08 17:38:30, Error CONX Failed hashing for [\??\c:\program files (x8... Read more

More replies
Relevance 75.98%

Hi all,
I cannot update to Windows 10 anniversary update. I get the 0x8007001f error code.
Here is the log from C:\$WINDOWS.~BT\Sources\Panther\setuperr.log


Code:
2016-09-08 17:28:05, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Suspend(1066): Result = 0xC1800104
2016-09-08 17:28:05, Error MOUPG CSetupManager::ExecuteInstallMode(735): Result = 0x800705BB
2016-09-08 17:28:05, Error MOUPG CSetupManager::ExecuteDownlevelMode(391): Result = 0x800705BB
2016-09-08 17:28:06, Error MOUPG CSetupManager::Execute(236): Result = 0x800705BB
2016-09-08 17:28:06, Error MOUPG CSetupHost::Execute(372): Result = 0x800705BB
2016-09-08 17:38:30, Error CONX Failed hashing for \??\c:\program files (x86)\norton internet security\nortondata\22.7.0.76\definitions\sdsdefs\20160630.020\eng64.sys, 0x80070003

2016-09-08 17:38:30, Error CONX Failed hashing for [\??\c:\program files (x86)\norton internet security\nortondata\22.7.0.76\definitions\sdsdefs\20160630.020\eng64.sys] 0x80070003

2016-09-08 17:38:30, Error CONX Failed hashing for \??\c:\program files (x86)\norton internet security\nortondata\22.7.0.76\definitions\sdsdefs\20160630.020\ex64.sys, 0x80070003

2016-09-08 17:38:30, Error CONX Failed hashing for [\??\c:\program files (x8... Read more

Answer:Windows 10 anniversary update - error code 0x8007001f

Download iso, double click on it and run setup.exe.

Windows 10

5 more replies
Relevance 103.32%

There is an 'x' on the little sound icon on the task bar and when I click it and run troubleshooter I get no joy. when I hover over the X it says 'No Audio Output Device is installed. In Device Manager there is a yellow triangle with an exclamation mark.  I've tried uninstall/reinstall of the driver but it doesn't work and it says 'hardware changes may not have been detected' 'fixed', but still no sound. I have been to HP site and tried the windows 8 and 8.1 versions but message says not compatible.Most of the solutions are for windows 10 preview and don't work either. I teach and really need this fixed asap if possible please it's my job on the line. No sound is a disaster. Oh, when I instal a webcam the sound indicator things go up and down so maybe there is sound input but no sound output? I use headphones but nothing shows up in 'Playback Devices' Thank you to anyone who can help someone with no clue.     

Answer:Win 10 update error: 0x8007001f install fail of IDT High Def...

I have a similar situation,  Nearly all the sound options work except the Scanner (police and that) kind I had plugged into the mic jack (in the back) which worked prefectly fine with Win8.1 (and previous releases)  I have tried other jacks/ports, ie Line in and the front mic jack (changing the options on the IDT control panel)   I get the same error about an audio device not being installed....   I went to the support site to look for updated (Win10) drivers, and none were found...pizzagirl4 wrote:There is an 'x' on the little sound icon on the task bar and when I click it and run troubleshooter I get no joy. when I hover over the X it says 'No Audio Output Device is installed. In Device Manager there is a yellow triangle with an exclamation mark.I no longer have the red "X" on the system tray iconMy exclaimation mark is next to an Unknown USB Device (Device Descriptor Request Failed)

7 more replies
Relevance 86.51%

Hey Guys,

I tried updating Windows 7 and got this Error: Code 9C47.
I then downloaded and tried to run SURT and it says -
'The following updates were not installed: Hotfix for Windows (KB947821)'
My cbs log is attached to this post.

Thanks for any help, appreciated.

Answer:Windows 7 Update Fail - Error Code 9C47

Odd - your SFC scan doesn't appear to have complete properly, either, although it does seem to have fixed one minor file error.

I have a suspicion I know what may be the problem - this may help isolate the cause....


http://www.sevenforums.com/windows-updates-activation/234159-windows-genuine-activation-issue-posting-instructions.html

Ignore errors produced when clicking on the Copy button - they simply mean that the tool could not create the backup files for some reason. The data is still copied to the clipboard for pasting to your response.

9 more replies
Relevance 85.69%

Well, I click update and it fails instantly. Has only been happening since the past 2 weeks. Plenty of reboots and shut downs since then, still the same. I google the code but doesn't seem like much help, and the results are a couple years old.

Help?

I also think this is the reason when I installed Kies it doesnt launch...

Answer:Windows instant fail update error code 800401E4

and I ran the updater tool

8 more replies
Relevance 85.28%

I have been getting error 0x8007001f whenever I attempted to install the windows 10 anniversary update. I went through most post suggestions for fixing this error. What I found I have not seen posted before.
I have one of those Dells (XPS 8900) similar to Alienware which has the system on a SSD and a second conventional HHD for data.
This configuration, if unchanged, still places user data (such as Documents) on the smaller SSD. In order to have all user data put on the larger HHD I defined a soft symbolic link from the SSD to the HHD for the Users directory. This worked great until my computer attempted to install the anniversary update of windows 10. I kept getting the 0x800701f error no matter what I tried. That is, until I restored the original Users directory on the SSD. After that the update went through just fine.
After the update I relinked the Users directory and everything came up as before but with the windows update installed.
If you have linked the users directory as I did just unlink (see below) and the update should go through.
Notes:
The mklink command is used to define the symbolic link. It should be run from an administrator command prompt.
(mklink /d Users D:\Users)
Rename the original Users directory on C: before defining the link. If you did not then you will have to copy the Users directory from D: to C: after deleting the link, then delete and relink after the windows update.
To delete the link just do an "rmdir Users" from administrat... Read more

More replies
Relevance 84.87%

Hi,

I'm using Win 7 x64 and I've got a problem with KB2937610 and KB2972211 for a long time now.
Neither of them installs. Errorcode returned is 800B0100.
I tried a bit everything I normally do like installing the update directly from the knowledgebase but nothing seems to bite.
It looks like you have been succesful solving this for others so I hope you can help me.

Attached the CBS log folder. I had to remove some .cab files or it would have been to large but all log files are there.
Attachment 340490

I also run SFC /SCANNOW but that came up clean (no integrity violations).

Thank you in advance for your help

Answer:Windows Update KB2937610 and KB2972211 fail; error code 800B0100

Quote:
Summary:
Seconds executed: 2162
Found 312 errors
CSI Manifest All Zeros Total count: 292
CBS MUM Corrupt Total count: 10
CBS Catalog Corrupt Total count: 10


At first glance, this looked as if it was a candidate for a repair install - but it may not be that bad.
I think most of the file problems are related to a single update, so I'll try and post a fix some time tomorrow.

9 more replies
Relevance 77.9%

Hi Experts - any advice on how to fix an IE10 update fail on Win 7 Pro x64?
Error code reported in Windows Update is 9C59. See also attached.

Thanks in advance.

Answer:IE10 Update Fail on Win 7 Pro x64 - error code 9C59

You have a number of problems - we'll start by fixing the easy ones....

Code:
Unavailable repair files:
winsxs\manifests\x86_microsoft.vc80.openmp_1fc8b3b9a1e18e3b_8.0.50727.4053_none_3b0e32bdc9afe437.manifest
winsxs\manifests\msil_windowsbase_31bf3856ad364e35_6.1.7600.20658_none_97a251cfa9f9bf71.manifest
winsxs\manifests\x86_microsoft-windows-ie-adminkitbranding_31bf3856ad364e35_8.0.7600.16535_none_8f171d3c2faa2f34.manifest
winsxs\manifests\x86_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.42_none_dc990e4797f81af1.manifest
winsxs\manifests\amd64_policy.9.0.microsoft.vc90.mfc_1fc8b3b9a1e18e3b_9.0.30729.1_none_3624aa14c1dce505.manifest
winsxs\manifests\x86_microsoft-windows-ie-adminkitbranding_31bf3856ad364e35_8.0.7600.20615_none_8fb659df48b7971c.manifest
winsxs\manifests\amd64_microsoft-windows-ie-feedsbs_31bf3856ad364e35_8.0.7600.20651_none_73a3371b847de3d2.manifest
winsxs\manifests\x86_microsoft-windows-ie-adminkitbranding_31bf3856ad364e35_8.0.7600.20651_none_8f87190748dba184.manifest
winsxs\manifests\x86_microsoft-windows-ie-adminkitbranding_31bf3856ad364e35_8.0.7600.16501_none_8f338bd82f957605.manifest
winsxs\manifests\amd64_6a99f26bbf673a01a84e338e4d400466_31bf3856ad364e35_9.4.8112.20537_none_aa63f9a268e150bf.manifest
winsxs\manifests\amd64_microsoft-windows-ie-extcompat_31bf3856ad364e35_9.4.8112.20544_none_b1c4e815c268ec76.manifest
winsxs\manifests\amd64_c7bb700a4fbacb263b1da5d95ff767b1_31bf3856ad364e35_9.4.8112.16437_none_f74af579b0024d36.manifest
ser... Read more

9 more replies
Relevance 77.9%

Hi all,

Instructed to create a new thread for this error.

I am running w7 x64 ultimate.

As per the instructions Windows Update Posting Instructions here are my results

1) SURT
still running

2) sfc /scannow
No problems, nothing in log (no CSI entries)

3) Error code is 8000FFFF, additionally two errors are logged in event viewer when trying to run the update file manually (Windows6.1-KB2758857-x64.msu)

-a- Error: Windows update client
Installation Failure: Windows failed to install the following update with error 0x8000ffff: Security Update for Windows (KB2758857).

-b- Error: WUSA
Windows update "Security Update for Windows (KB2758857)" could not be installed because of error 2147549183 "Catastrophic failure" (Command line: ""C:\Windows\system32\wusa.exe" "D:\Users\xxxxxxx\Downloads\Windows6.1-KB2758857-x64.msu" ")

4) CBS.rar attached

5) Other things tried

Apart from running various microsoft fixit utilities suggested elsewhere, I also tried to run the update with msconfig, selective startup, only windows services active, and of course failed.

Answer:Update fail w7 x64: KB2758857. Error code 8000FFFF

Your CBS logfiles are generating at a very high speed - and it's therefore likely that you have a huge amount of corruption.
There is no CheckSUR data in your upload - either you uploaded before it ran, or it failed before being able to generate a log.

please try again......

Please run a full CHKDSK and SFC scan....

Click on Start > All Programs > Accessories
Right-click on the Command Prompt entry
Select Run as Administrator and accept the UAC prompt - the Elevated Command Prompt window should pop up.

At the Command prompt, type

CHKDSK C: /R

and hit the Enter key.
You will be told that the drive is locked,
and the CHKDSK will run at he next boot - hit the Y key, and then reboot.

The CHKDSK will take a few hours depending on the size of the drive, so be patient!

After the CHKDSK has run, Windows should boot normally (possibly after a second auto-reboot) -
then run the SFC.

SFC -System File Checker - Instructions
Click on Start > All Programs > Accessories
Right-click on the Command Prompt entry
Select Run as Administrator and accept the UAC prompt - the Elevated Command Prompt window should pop up.

At the Command prompt, type

SFC /SCANNOW

and hit the Enter key

Wait for the scan to finish - make a note of any error messages - and then reboot.
Copy the CBS.log file created (C:\Windows\Logs\CBS\CBS.log) to your desktop (you can't manipulate it directly) and then compress the copy and attach it to your reply.

9 more replies
Relevance 77.49%

My Windows 10 system is up to date version 1607.

When I try to install Creators Update through the Windows Upgrade tool it fails with error message 0x8007001f. It also fails if I try to upgrade through the Media Creation Tool.

I have run the update trouble shooter and sound trouble shooter as suggested by a few people which found and corrected a couple of issues but no difference. I have uninstalled my Avast anti-virus and no change.

My system is a desktop PC with i5, 24GB RAM. The OS is on a SSD with other programs and files on a normal hard disk.

I am guessing there is a log of the install which will tell me what is stopping the upgrade. How can I find and identify the problem? I really do NOT want to do a clean install.

Any help appreciated.

Answer:Creators update 0x8007001f install error

Hi anparkinson.

This article may answer your question.

https://technet.microsoft.com/en-us/...(v=ws.10).aspx

Does sfc /scannow provide any errors.
Ken

1 more replies
Relevance 74.21%

I am trying to run through several steps to hopefully solve or troubleshoot BSOD error Kernel Power Event ID 41. One of the steps is of course to update everything..

I have run MSE and MWB with no problems. I have run DSKCHK and Memory diagnostics tool... I have run the SURT several times, There was a corrupted something in the sfc scan that was not able to be fixed. My CBS folder is available on my Google drive at https://drive.google.com/folderview?...EU&usp=sharing

Thank you for your help.

More replies
Relevance 74.21%

Windows 7 Fail to Update: Code 800736B3 - Getting error on update CBS

Answer:Windows 7 Fail to Update: Code 800736B3

The SFC log seems incomplete, please run SFC /SCANNOW again
Windows Update Posting Instructions

Step 4 asks you to copy the CBS folder to your desktop and put it in a zip folder.
Upload the zip folder when you post again.

If the zip folder is too big for the forum, upload just the CBS.log from the CBS folder copy on your Desktop.
Please add your SF Systems Specs by following this tutorial: System Info - See Your System SpecsIn the System Manufacturer/Model Number field, manually type Desktop or Laptop adding it to the information already in the field.
Specify Custom Build as the manufacturer if it is not an OEM machine.
The tool does not fill in this information but it is very important if someone has to research drivers or hardware for your machine.
Log on to Sevenforums (SF) and let the tool fill in you System specs on your SF profile.

Full instructions are in the tutorial. It's a simple process and it makes that information readily available on your posts. You don't have to retype the information in any thread.

Click here to view your system specs on SevenForums.

Click on My System Specs in the lower left of any post by any member to see what is presented about their machine.

Thanks

2 more replies
Relevance 74.21%

After factory resetting my laptop I had to start again with the windows updates. After installing many of them the past 2-3 days, I now get a fail message with these specific five.

Updates that fail with Code 80073712:


I ran the sfc /scannow command and it says that it found corrupt files but was unable to fix them.
Τhe log is pretty big (that can't be good) and it cannot be attached here unfortunately. So I'm giving a dropbox link (I hope this is OK) for it:
https://www.dropbox.com/s/stuug5snusw0m0g/CBS.zip?dl=0

I also ran the SUR tool, but I couldn't get it to install or work. I read that you have to wait for it, but it was on for about 3-4 hours installing a Hotfix and the bar did not even begin to get full.

Any help would be appreciated as I lost much of my time these past few days with formatting and trying to make my laptop as it was before.

Answer:Windows Update Fail - code 80073712

Try disabling you anti-virus and run the SUR tool again

9 more replies
Relevance 73.39%

Hi.

I'm using Windows 7 Ultimate (64-Bit).

I've been having this issue for some time now. Don't know the cause of this issue. I hope someone can help me out. I've tried downloading the update manually and installing it with no success -it does not give an error code though, just a text saying that it could not install the update.

I've downloaded SURT and ran it first, then I've run "sfc /verifyonly" in run/cmd. Attached are the results of that procedure (CBS 1.zip for SURT, CBS 2.zip for "sfc /verifyonly" method). & C:\Windows\windowsudpate.log file. I've also added the only CbsPersist*.cab file I could add due to it's size to CBS 2.zip.

Thanks in advance!

Attachment 361560

Attachment 361561

WindowsUpdate.zip

Answer:Windows Update KB3020370 fail - Code 800B0100

Here's the CheckSUR log summary...

Code:
Summary:
Seconds executed: 569
Found 8 errors
CSI Manifest All Zeros Total count: 2
CBS MUM Corrupt Total count: 3
CBS Catalog Corrupt Total count: 3
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-cmitrustinfoinstallers_1122334455667788_6.1.7601.18766_none_eff6dbbccdcdcee0.manifest
winsxs\manifests\amd64_microsoft-windows-cmitrustinfoinstallers_1122334455667788_6.1.7601.22972_none_f071a959e6f72266.manifest
servicing\packages\Package_2_for_KB3020370~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_2_for_KB3020370~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_for_KB3020370_SP1~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_for_KB3020370_SP1~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_for_KB3020370~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_for_KB3020370~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_2_for_KB3020370~31bf3856ad364e35~amd64~~6.1.1.2.cat
servicing\packages\Package_2_for_KB3020370~31bf3856ad364e35~amd64~~6.1.1.2.cat
servicing\packages\Package_for_KB3020370_SP1~31bf3856ad364e35~amd64~~6.1.1.2.cat
servicing\packages\Package_for_KB3020370_SP1~31bf3856ad364e35~amd64~~6.1.1.2.cat
servicing\packages\Package_for_KB3020370~31bf3856ad364e35~amd64~~6.1.1.2.cat
servicing\packages\Package_for_KB3020370~31bf3856ad364e35~amd64~~6.1.1.2.cat
I'll post a fix protocol later.

9 more replies
Relevance 72.57%

Greetings to everyone from Puerto Rico. Let me start off by explaining that I have had this problem for a week or 2 and I have searched everywhere on the internet and have followed all the advice I have read and still nothing, it has come to the point I registered here to see if someone could help me because I'm just frustrated and mad at this point.

I think this problem is common enough and I know a lot of users have gone through the same.

I have added the CheckSur.log and CheckSur.persist.log

Any and all help will be appreciated, thank you for your time.

Answer:Windows Service Pack 1 Update fail Code 800B0100

Hi and welcome to seven forums,

I don't know for sure as it was a long time ago for me but I think I had an issue installing service pack one and it was all down to windows defender.

I think I either disabled it while installing or uninstalled it and then reinstalled it after.

Might not work for you but worth a shot.
Paul.

9 more replies
Relevance 72.16%

I have an acer aspire netbook that used to run Windows 7. I bought a Windows 8.1 Pro disk and installed that. After that, when Windows 10 was released I upgraded but encountered a boot loop so I formatted the device and did a clean install from a bootable USB containing Windows 10. Now I receive the error code "Error code: 0xC004C003" It says the activation code has been blocked. What can I do?

More replies
Relevance 71.75%

I have Windows 7 Home edition; Microsoft updates are problematic, have had to download individually to get important security updates installed, not all have installed, computer takes ages to create a Restore point and then does not always succeed in reconfiguring at reboot after install. Got error code 643, Have Norton 360, tried downloading the Norton Power Eraser but this failed, and got error code 0x80070005, n44, n66.
 
Can anyone help? Spent last two days trying to install MS security updates one by one and the last two simply will not install.

Answer:Windows 7 updates fail, error code 643

 Download and install Malwarebytes, get it up to date, and do a scan.  When the scan finishes, click Quarantine all.  After that boot to Safe Mode and do a full system scan with your antivirus.
 
 If you still have problems after that, do this.
Please download and run Speccy.  After running it click File -> Publish snapshot... Copy and paste the link it gives you into your next post.  Then download minitoolbox and run it with the following boxes checked:
List last 10 Event Viewer Errors
List Installed Programs
List Users, Partitions, and Memory size
List Minidump files
Copy the resulting log and paste into a reply here.
 
Good luck.

2 more replies
Relevance 71.34%

I have been trouble shooting this error and with no success so far, and need guidance for the next step. The update fails briefly after stating "getting the update ready".
My Sony Vaio S series laptop, (about a year old, and came installed with windows 8), has repetitively failed installing the Windows 8.1 update from the windows store.
Here are the trouble shooting steps I have tried so far, but still with no success:
(1)Unplug all external devices
(2)A clean boot startup
(3)Turning off virus protection
(4)Installing the KB2864247 UPDATE
I do not believe my computer is one of those that falls under the category of not being able to have the free 8.1 upgrade.
What else can I try to upgrade my laptop?
Thanks in advance to any who gives advice. 

More replies
Relevance 70.93%

The following three updates fail with the same error code (80070490):
KB3031432
KB3004375
KB3004394

I already used SURT and SFC Scan, but didn't any errors and didn't fix the issue. Sorry I had to split the CBS logs due to the 8 Mbyte limit.

Thanks in advance for your help.

Answer:3 Windows Updates Fail with error code 80070490

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file
- you didn't post the CheckSUR log?

3 more replies
Relevance 70.93%

My partner has a Windows 7 64 Bit installation and the computer is VERY slow.... in running just about anything...
The windows updates fail to install... with error code 8024200D
We have tried the fixit on Microsoft website (incouding system readiness tool) without success... any suggestions?

Answer:Windows updates fail... 8024200D error code

Hello,
Please let us know what Windows Update Automated Troubleshooter reported you back? So that we can further help you on this issue.
Regards.

2 more replies
Relevance 70.93%

When I try to install windows updates, I always get this error message...Error Code: 0x80070645. I went to Microsoft and viewed history and it is the following that can't be installed...
Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update for .NET versions 2.0 through 3.5 (KB951847) x86
Add & Remove shows I have Microsoft Net Framework 3.5 SP1, Framework 4 Client Profile & Framework 4 Extended.
I would very much appreciate any help. I have spent all morning at the Microsoft Support site and am very confused.

Answer:Windows updates fail with Error Code: 0x80070645

Using Add/Remove Programs...uninstall 3.5, SP1...after uninstalling Framework 4. I suspect that one or both are damaged.

Then...reinstall 3.5, SP1 from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=ab99342f-5d1a-413d-8319-81da479ab0d7

Louis

7 more replies
Relevance 70.11%

Hi All,
 
I have a Lenovo G580 on Windows 8.
Windows updates keep on failing with the error code above. 
Anyone know why they keep failing. screenshot below:
 
 

 
Moderator Note; subject edited; system type added

Answer:G580 windows 8 updates fail with error code 8007371B

hi parvaz,
 
Welcome to Lenovo Community Forums!
 
Can you try pulling up a run box (Windows key + R)
then type services.msc 
 
You will have a list of Services, look for Nalpeiron Licensing Service or any entry that has Nalperion
  Right click on it and choose properties.
 
You should have an option to stop it and choose the Startup type to Disabled 
 
Now run Msconfig and  look for the Nalperion service and disabled it aswell Under Services and Startup tab.
 
After Restart Try the updates again,
If still failed
Perform a Clean Boot and try the updates again
 
Regards
Solid Cruver
 





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

2 more replies
Relevance 70.11%

I'm running a Windows 7 Professional machine from which I remotely administer several networks that I constructed and manage.  I've been connecting computers together professionally since 1980.  (Hopefully, that will alleviate the necessity
for anyone to ask me if I've checked my internet connection.)
This machine performs flawlessly except for the built-in Windows 7 internet games.
It is unpredictable whether or not I will be able to successfully play a game of Internet Spades or Backgammon (I haven't tried the other games).  One moment, it will connect to the game server, find players, and connect to the game, but fail to start
the game.  If I try again, it will start the game within a couple seconds.  Then again, it may hang while connecting to the server or to the game.  But on many days, I can only play a game about half the time that I attempt to. 
The rest of the time, I get this error:
"A network error occurred while communicating with the game server.

"Error Code: 0x80041009"
On some occasions, the error code is 0x80041006 or 0x80041004.  This happens whether I am doing anything else with my connection or not.  I might be listening to Pandora or watching a live news stream, but I can't play Spades. 
I might be able to play Internet  Backgammon just fine, but not Spades or, seemingly less often, vice versa.
These errors occu... Read more

More replies
Relevance 70.11%

I am unable to install updates on a Windows 7 Shuttle PC. There has not been a successful update since I first installed Windows 7 on the machine. The machine originally had Windows Vista on it. I Gparted, wiped the machine, and installed a clean Windows 7 onto the machine. Five months later, still unable to get a single update installed. I have had a wide variety of error messages in the five months including Windows was unable to check for updates automatically error 8007000e to the most recent 80240016. It says "Windows updates were installed: Never" and the last check for updates was 11/11/16. I left the computer run for an entire week as of today with the VGA Cable unplugged in hopes that it would be restarted for updates, which means that it took Windows an entire 6 days to even check for updates. The computer was not restarted and when I tell Windows to install the 976 MB of updates, immediately when I click "install updates" it failed as soon as I clicked "install updates" Trusted Installer says it is occupying more than 2GB of ram but the number does not change at all and is using 0% CPU. It seems that Trusted Installer is hung. If I end process on Trusted Installer, I get a "Operation could not be completed. Access is denied"
 
Does anybody know what the problem could be?

More replies
Relevance 70.11%

I am unable to install updates on a Windows 7 Shuttle PC. There has not been a successful update since I first installed Windows 7 on the machine. The machine originally had Windows Vista on it. I Gparted, wiped the machine, and installed a clean Windows 7 onto the machine. Five months later, still unable to get a single update installed. I have had a wide variety of error messages in the five months including Windows was unable to check for updates automatically error 8007000e to the most recent 80240016. It says "Windows updates were installed: Never" and the last check for updates was 11/11/16. I left the computer run for an entire week as of today with the VGA Cable unplugged in hopes that it would be restarted for updates, which means that it took Windows an entire 6 days to even check for updates. The computer was not restarted and when I tell Windows to install the 976 MB of updates, immediately when I click "install updates" it failed as soon as I clicked "install updates" Trusted Installer says it is occupying more than 2GB of ram but the number does not change at all and is using 0% CPU. It seems that Trusted Installer is hung. If I end process on Trusted Installer, I get a "Operation could not be completed. Access is denied"

More replies
Relevance 70.11%

What is going on with Win7 internet game server?  
MS Internet Games on my win7 64 either won't load (error 0x80041004) or are dropped during the game play  (0x80041006). 
'Clean boot', reinstalling the programs have no effect.
 This is big problem, reported by MANY people.

More replies
Relevance 70.11%

Having seen thousands with same complaint, I have discovered that from 3 to 6am gmt, there is little or no problem.  After that it is almost impossible to load an MS internet game, or if loads, then crashes with the same error message...

More replies
Relevance 69.29%

hello friends.
i am ready to break my pc cause there are 15 updates that always fail to update with error code
80070003

Steps i already did.

I RESET windows update by stopping windows update service delete the folders that i should started again the
windows update service restarted the pc and fails continued

i have started the pc changing the msconfig settings as i read but still fails

i used the sfc /scannow command and the only error is the msoe.dll that i have changed to run outlook express at win 7

i also bought regcure that finds no errors

i run chkdsk command no errors again

PLEASE HELP !!!

Answer:Windows 7 Ultimate 64bit 15 updates fail error code 80070003

From the looks of it, you have the hack in place to enable WinMail/OE in WIndows 7??

Code:
Line 4086: 2014-02-19 20:12:18, Info CSI 000003c5 [SR] Repairing 1 components
Line 4087: 2014-02-19 20:12:18, Info CSI 000003c6 [SR] Beginning Verify and Repair transaction
Line 4090: 2014-02-19 20:12:18, Info CSI 000003c8 [SR] Cannot repair member file [l:16{8}]"msoe.dll" of Microsoft-Windows-Mail-Core-DLL, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 4093: 2014-02-19 20:12:19, Info CSI 000003ca [SR] Cannot repair member file [l:16{8}]"msoe.dll" of Microsoft-Windows-Mail-Core-DLL, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 4094: 2014-02-19 20:12:19, Info CSI 000003cb [SR] This component was referenced by [l:242{121}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-Client-Features-Update"
Line 4099: 2014-02-19 20:12:19, Info CSI 000003ce [SR] Could not reproject corrupted file [ml:520{260},l:66{33}]"\??... Read more

9 more replies
Relevance 68.47%

Computer model: Panasonic Toughbook CF-31
OS: Windows 7 SP1
Processor: Intel Core i5-2540M CPU @ 2.60GHz 2.60GHz
RAM: 4 GB (3.89 GB usable)
System type: 64-bit

CBS Log
CBS.zip - Google Drive

I ran the SURT tool Windows6.1-KB947821-v34-x64.msu.
Ran fine, no problem.

Ran sfc /scannow
"Verification 100%"
"Windows Resource Protection could not perform the requested operation."

Also ran
Malwarebytes
JRT.exe
Adwcleaner
Hitmanpro_x64

I still get the "Windows Update Error, Error Code 80070643, Code 9C57"

Answer:Windows Update Error, Error Code 80070643, Code 9C57

Hi Qpuser,
lookin at your logs
couple of questions
Are you dual booting or have the OS on your D drive/partition.
can you also run, in following order

http://www.sysnative.com/niemiro/apps/SFCFix.exe
http://go.microsoft.com/fwlink/?LinkID=52012
and sfc /scannow

copy/paste the results please.

Roy

1 more replies
Relevance 67.65%

I have an Acer Aspire Ethos laptop running Windows 7 Ultimate x64. SP1 is installed according to system properties (came installed).

Windows update was working fine until maybe June or May of this year.

I have tried a number of hotfixes, several microsoft fixit (automatic normal and aggressive runs), the sfc /scannow in admin CMD mode, and also uninstalled the last ten or so updates. I have also deleted the contents of the /Downloaded Installation Files/ within C:/Windows but that also did not fix the error.

Have also tried disabling my antivirus but that did not change anything, windows update will not self-update at all.

Nothing seems to work. Please help.

Below see a typical update attempt from the log (repeats almost every other day more or less the same.






Quote:
2012-08-27 13:31:58:097 1088 162c AU ## START ## AU: Search for updates
2012-08-27 13:31:58:097 1088 162c AU #########
2012-08-27 13:31:58:103 1088 162c AU <<## SUBMITTED ## AU: Search for updates [CallId = {DC5A4D0A-1B62-43F8-ABF1-BED8250E87B9}]
2012-08-27 13:31:58:580 1088 13d0 Agent *************
2012-08-27 13:31:58:580 1088 13d0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2012-08-27 13:31:58:580 1088 13d0 Agent *********
2012-08-27 13:31:58:580 1088 13d0 Agent * Online = Yes; Ignore download priority = No
2012-08-27 13:31:58:580 1088 13d0 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=... Read more

Answer:Windows Update Self-update Fail Error 80073712

agreed. I am facing a similar problem as you. Help

2 more replies
Relevance 67.24%

Attachment 290231
i having problem with this windows update

here is zip for CBSAttachment 290230


thanks!!!

Answer:windows update error (code 9c48 and code 9c57)

You haven't run the CheckSUR tool.

Pleasefollow the WindowsUpdate Posting Instructions and post the requested data

6 more replies
Relevance 66.42%

I can't update at all for the past 2 weeks, I have tried the little cmd tricks, nothing works.

Please help me!

Answer:Windows Update error code # Code 80070424

Same thing happened to me last week. I ended up backing up my important files and doing a fresh install of Windows. It was quicker and easier than all the work I put into trying to repair it.

3 more replies
Relevance 65.6%

Hi guys,

I am a new comer here. I am Indonesian so I hope you guys could understand my english.

So I am trying to update my windows but it keeps failing and reporting me with error code 80073712

I try to run the sfc /scannow but it doesn't work. It says:

"Windows Resource Protection could not perform the requested operation."

I try to run the Windows Update Readiness Tool Windows6.1 KB976932, it does not work.

The txt files at %windir%\logs\cbs\checkSUR.log reporting this:


=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2015-05-27 18:33

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store
(f) CSI Missing Root Key 0x00000002 HKLM\Components\CanonicalData\Deployments

Summary:
Seconds executed: 44
Found 1 errors
CSI Missing Root Key Total count: 1

What does that mean? How to fix this thing?

Finally, I keep on searching for the fixes but some sites telling me to just do a repair install of my windows 7.

I try to do it, but somehow it doesn't want to continuing the process

"Setup can't continue. Restart computer and restart setup. When prompt try selecting getting latest installation updates"

FYI, i got my Windows 7 free copy from my campus, it called Dreamsparks or something likethat.

I hope any ... Read more

Answer:Windows Update Fail Error 80073712

The CheckSUR error is a fairly major one! Unless we get lucky, the chances are that you'll have to do a repair install to fix this.


I need to have a look at your COMPONENTS registry hive

Please copy the C:\Windows\System32\config\COMPONENTS file (no extension) to your desktop and then compress it - upload the compressed file to your favoured fileshare site (preferably Dropbox or OneDrive) and post a link.

4 more replies
Relevance 65.6%

I was trying to upgrade to windows 8 Pro on my Lenovo G580, as I got my student license from my University. There started the problem, when trying to upgrade from the DVD (burnt ISO) the upgrade immediately sends "Setup failed to initialize the startup folder" error.

So after few searches, I found on lenovo website that I need to install all important updates first. That's where I found another problem, which is my thread about. I tried so many methods until I found this forum.

Few other problems I ran through while trying to fix it alone:
Updating seems like stuck at 0KB total, 0%, and returns the same error after a while.
Can't enter safe mode from F8, it gets stuck at some CPNP file while loading. However, I can enter the safe mode by choosing Safe Boot from Msconfig and restarting the system.
Running CHKDSK from CMD [Admin] gave "F Parameter not specified, running in read-only mode", and then runs normally.
Tried to download and install updates alone, they all fail when trying to install.
One of the times where the update readiness tool was running, my pc encountered BSoD. And once when I was scanning with malwarebytes.
SFC Scannow command scan returns that no violations in integrations where found.
Note: I just ran the SURT, it said installation successful after a while of running it!

Thanks in advance,

Rahmani

Answer:Windows 7 Update Fail, Error 80073712

Try to running chkdsk /r and sfc /scannow.
SFC /SCANNOW Command - System File Checker

9 more replies
Relevance 65.6%

I am trying to install windows updates but am unable to install 12 of them. The error message is 0x80242FFF. How can I fix this?Regards John

Answer:Windows update fail error 0x80242FFF

I am trying to install windows updates but am unable to install 12 of them. The error message is 0x80242FFF. How can I fix this? Regards John

4 more replies
Relevance 65.6%

Hi there,
I try to update from IE9 to IE10, but every time I get the error message with Code 9C59.
Could you please guide me through in how to get this update problem solved?

Answer:UPDATE FAIL: Code 9C59

Run sfc/scannow,
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html?ltr=S
http://support.microsoft.com/kb/929833?wa=wsignin1.0#method1

6 more replies
Relevance 65.19%

I am unable to install Windows updates as I get an error " Code 64C : windows update encountered an unknown error..
Same with Code 66A
Please help.
I am unable to also install Windows Live essentials
I am using Windows 7
Greg

More replies
Relevance 65.19%

Did the best I could reading the posting rules for the forum and the Update forums, but please let me know if there's anything else I need to do.

I attached a screenshot of the Update that has failed to load for months now and the error code it gave me (both are also in the post title).

I was unable to download the SURT as I didn't see the correct one for my system and I wouldn't want to download the wrong one. For this reason I attached a screenshot of my system spec.s so if I need this for you to help me, you can let me know which to download. Also following the links on the Update posting rules took me to this link: I'm fairly certain my system is x32 based (could be wrong) which I don't see as an option.
System Update Readiness Tool fixes Windows Update errors in Windows 7, Windows Vista, Windows Server 2008 R2, and Windows Server 2008

Also, I'm not sure it helps but I saw that someone had, had the same Update fail but with different error code. I doubt it helps but just in case here's a link to his thread:
KB2742599 won't install

I did not follow those directions, I just thought I'd mention that it had been on here before.

This has been a problem for a long time now that I've been ignoring and when I got annoyed with it I found this site. I followed all steps in the Update posting guide (except the aforementioned 1st) but let me know if there's any other information needed. Hopefully someone can help me out, thanks so much in advance!

Answer:Windows Update Fail - KB2472599 - Error: 800B0100

Hello Xenos 8, welcome to SevenForums!

Your CBS log shows the problem:

Code:
2013-06-14 09:47:17, Info CBS Session: 30304517_2934368048 initialized by client WindowsUpdateAgent.
2013-06-14 09:47:17, Info CBS WinVerifyTrust failed [HRESULT = 0x800b0100 - TRUST_E_NOSIGNATURE]
2013-06-14 09:47:17, Error CBS Failed to verify if catalog file \\?\C:\Windows\SoftwareDistribution\Download\6c1eb21eedb478f6f2b4474d905ec498\update.cat is valid. [HRESULT = 0x800b0100 - TRUST_E_NOSIGNATURE]
2013-06-14 09:47:17, Info CBS Failed to initialize internal package [HRESULT = 0x800b0100 - TRUST_E_NOSIGNATURE]
2013-06-14 09:47:17, Error CBS Failed to create internal package [HRESULT = 0x800b0100 - TRUST_E_NOSIGNATURE]

Can you run this FixIt in aggressive mode please?
You receive a "0x80070002" or "0x80070003" error code after you download an update from Windows Update, from Microsoft Update, or from Windows Server Update Services
Then try updating and post the logs if it fails - which is shouldn't
Tom

3 more replies
Relevance 65.19%

So I've been suffering a plethora of problems recently: to my computer randomly rebooting when I open Photoshop/open chrome/run MS security essentials all the way to the update failure when I hit install, any help would be appreciated. I like to solve problems 1 at a time however: so lets start with the update

Answer:Windows 7 update KB3019215 fail error 80073712

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

9 more replies
Relevance 65.19%

Hi Majorgeeks,
Post malware infection and successful cleaning, I'm in the process of protecting my computer using you 'How to Protect you computer from Malware' recommendations and I find that I am falling at the first hurdle. I can't install any Windows updates and I keep on getting the above error message. I trouble shot for the solution and it looks as if I need to go into the system 32 to check it out. I don't really feel experienced enough, so I'm wondering if you can help me out in any way possible.
Thanks,
Superdan
 

Answer:Windows Update Fail [Error number: 0x80070424]

This is really something you should work in the Software Forum if your PC has already had all malware removed.

However try the below:

Please click Start, Run, and enter cmd and click OK. This will open a command prompt window. Enter the below command at the command prompt and then hit the enter key.

%SYSTEMROOT%\SYSTEM32\REGSVR32.EXE %SYSTEMROOT%\SYSTEM32\WUAUENG.DLL

Now look for the C:\MGlogs.zip file and attach it no matter what happened while doing the above.

If that does not help, try disabling protection software while updating. And if that still does not work, I suggest that you continue in the Software Forum.
 

1 more replies
Relevance 64.78%

When I try to install KB3182373, a "Security Update for Microsoft Silverlight", Windows Update reports failure with the message "Code 643 Windows Update encountered an unknown error".
I ran WindowsUpdateDiagnostic.diagcab. It reported that "Troubleshooting couldn't identify the problem".
What can I do to fix this? I'm running Windows 7 Professional.

More replies
Relevance 64.37%

Ran Windows Update on wife's computer today (Biostar A75-MH mobo, AMD A8-3850, 8Gb DDR3-1600, 64Gb Samsung 830 SSD boot drive, Win7 x64) and upon restart it froze at 35% installing the updates. After it did nothing for 30 min I rebooted. It boots to the desktop but with an error box saying failed to load sortbls.nlp. Explorer isn't working, can run any programs, Start menu won't come up, just sits with the blue circle spinning. Tried to run system restore but the 11-15 one disappeared from the list when I tried to run it and now just shows the only restore point as Windows Update Critical Update from today which fails. Startup Repair says no problems.


Any suggestions?

Sam
 

Answer:fail to load sortbls.nlp error after Windows Update froze

Use System Restore to revert back to a date before any updates may have been applied.
 

2 more replies
Relevance 64.37%

I had already installed, successfully I might add, a Definitions update for Microsoft Office 2010 (KB3115321). The Update already installed and now it keeps coming up with the same error unable to install update:
Definition Update for Microsoft Office 2010 (KB3115321) 32-Bit Edition - Error 0x80070643
I tried uninstalling the installed update and Windows won't do it returning an "Unspecified error" response. I have Windows 10 Home (32bit) installed and I cannot find a way to get Update, as you used to be able do, to HIDE the offending update. (THANKS Microsoft for removing functionality from Windows YET AGAIN).
I'm at my wits end with this. . I have asked about this problem before directly reporting the issue to Microsoft (Surprise surprise... NO RESPONSE. I'd get a better response from a brick wall). Seriously not happy; considering cutting my losses and reverting (AS I STILL HAVE MY INSTALL DISCS) to Windows 7 or moving to Linux. Way to go to p**s off users!

Answer:Windows Updates fail to install an already installed update error???

Problem solved. Used the Microsoft Show/Hide Updates Troubleshooter tool. Why did I have to go looking for this? This is a useful part of Windows functionality... What were they thinking of removing it. then hiding the tool? (Rhetorical questions; I know why. Thank you Nanny Microsoft, but I'm a better programmer than most of your shiftless lot)

1 more replies
Relevance 64.37%

I keep getting Update Failed error with the following codes:

Code 800F0900 (unknown error)
Code 80073712 (unknown error)

The updates are for:
Cumulative Security Update for Internet Explorer 10 for Windows 7 Service Pack 1 for x64-based Systems (KB2879017)
and
Update for Windows 7 for x64-based Systems (KB2882822)

I had the same issue with .Net Framework updates, but uninstalling with a .Net full removal tool then re-installing did the trick there.

So far I've tried manually installing the updates, running WindowsUpdateDiagnostic, running Tweaking.com Windows Repair (All in One), Microsoft FixIt. None of these have helped and am a loss.

I've included the CBS files as well as the SFCFix.txt to this post. Any suggestions on what to do next? Let me know if you need more info...

Thanks!

Answer:Windows Update Fail - Error Codes 800F0900 and 80073712

You have a LOT of errors there!
Here's the SFCFix summary...
AutoAnalysis::

Code:
SUMMARY: Some corruptions could not be fixed automatically and others were
unimportant. Seek advice from helper or sysnative.com.
CBS & SFC total detected corruption count: 8

CBS & SFC total unimportant corruption count: 0
CBS & SFC total fixed corruption count: 0
SURT total detected corruption count: 98
SURT total unimportant corruption count: 2
SURT total fixed corruption count: 0
AutoAnalysis:: directive completed successfully.

I'll post a first-fix protocol later, and we'll see how it goes.

9 more replies
Relevance 64.37%

Wanted to report to the world that I was getting this failure during automatic updates for Windows XP Home edition.

After a day of trying to follow the Microsoft suggestions, I finally tried to execute the individual updates manually. When doing so, I had an error copying the file c:\.....\branches.inf.

I found a post on this site by MOXYLL (http://www.techsupportforum.com/show...t=branches.inf) in which she suggested changing the following file to read/write from read only:
c:\windows\inf\branches.inf.

Guess what?!?! It worked!! All my Windows Update failures went away.

Now if I could somehow reclaim my day! ... ARGH!

Hope this helps some frantic frustrated person out there!

Best,
Dan

More replies
Relevance 64.37%

I had already installed, successfully I might add, a Definitions update for Microsoft Office 2010 (KB3115321). The Update already installed and now it keeps coming up with the same error unable to install update:
Definition Update for Microsoft Office 2010 (KB3115321) 32-Bit Edition - Error 0x80070643
I tried uninstalling the installed update and Windows won't do it returning an "Unspecified error" response. I have Windows 10 Home (32bit) installed and I cannot find a way to get Update, as you used to be able do, to HIDE the offending update. (THANKS Microsoft for removing functionality from Windows YET AGAIN).
I'm at my wits end with this. . I have asked about this problem before directly reporting the issue to Microsoft (Surprise surprise... NO RESPONSE. I'd get a better response from a brick wall). Seriously not happy; considering cutting my losses and reverting (AS I STILL HAVE MY INSTALL DISCS) to Windows 7 or moving to Linux. Way to go to p**s off users!

More replies
Relevance 64.37%

Discovered and issue with a Dell machine that turned out to be some bad sectors on th HDD that were found and repaired by seatools.
Install of windows 7 was fresh prior to discovering the HDD errors, now it run fine, but widows update keep failing with the code: Code 8024200D
on these two updates:
KB2868725
KB2852386

Any ideas what is happening and how to resolve?
Thanks

Answer:Update Fail: Code 8024200D KB2868725/KB2852386

Please follow the Windows Update Posting Instructions and post the requested data

6 more replies
Relevance 63.96%

windows 7 professional had no trouble until 12/13/12 i think was the date
I have looked into many threads on this subject to no avail. nothing in the registry HKEY_local_machine/ components to remove. not the clock, tried microsoft fixit.



here is a copy of my MGA diagnostics file

Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0x8004FE21
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-TKY6X-QRT82-7K6CH
Windows Product Key Hash: x82eg3fzrYc3BYQyKndw0qOX+7E=
Windows Product ID: 00371-221-1920097-86002
Windows Product ID Type: 5
Windows License Type: Retail
Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {021534FC-B8F6-4CE2-9A59-D828EFDF6578}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.120830-0333
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr ... Read more

Answer:windows update fail error 8000FFFF also showing windows not genuine

This may simply be caused by a bad set of Intel Rapid Storage Technology drivers -

Installing the Intel Rapid Storage Drivers
try downloading and installing them from here - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=21730

(you want the iata_enu.exe download)

Once complete, please reboot twice, then post another MGADiag report.
If that one fails, try the earlier driver set -
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=17412

9 more replies
Relevance 63.96%

no matter how many times i clean the drive it will still come up with this error. i can't figure out what is going on. i am able to convert the movie just fine but when it comes times to write to blank dvd, it won't do it. this is the problem i am having on my laptop which i will include the log. for some reason on my pc the program convertxtodvd doesn't even acknowledge that i have a dvd drive , i believe it is the pcouffin, which i have uninstalled and reinstalled but i cannot get it to work. it says it is working fine but device no longer available. well here is the log from my laptop which will convert but will not finish the copy.

2/20/2008 1:29:47 AM info ********** Report session closed ***********
2/20/2008 1:29:30 AM error BURN: Write error at 0 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burner is dirty)]
2/20/2008 1:28:14 AM info BURN: Write started 894784 sectors to write
2/20/2008 1:28:14 AM info BURN: Writing speed requested x4.0, effective x4.0
2/20/2008 1:28:13 AM info BURN: Available write speed: 8x, 6x, 4x, 2.4x
2/20/2008 1:28:13 AM info BURN: Media ID: SONY-D21-00
2/20/2008 1:28:13 AM info BURN: Media type: DVD+R
2/20/2008 1:28:13 AM info BURN: Multiword DMA Mode 2
2/20/2008 1:28:11 AM info BURN: Scanned files #8, folder #2 - total size 1831393280 b. (1.71 Gb.)
2/20/2008 1:28:11 AM info BURN: Inserted media type : DVD+R
2/20/2008 1:28:11 AM info BURN: Write started
2/20/2008 1:28:10 AM info --------... Read more

Answer:Write error at 0 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burne

Replace the laptops burner... Laptop/notebook CD/DVD R/W's are very delicate and are more subject to failure than desktop writers
 

3 more replies
Relevance 63.96%

Operating System:       Windows Vista Home Premium
Computer:                     Compaq Presario SR5079UK                                          2 gb RAM
Problem:  "Windows Update; Error Code 8000FFFF"   "Unable to uninstall update KB929777"
Solutions Tried:
Disable all Antivirus softwareTry running windows updates, and receive the error message "Error Code 8000FFFF"I have been advised to uninstall update KB929777, when trying to do this I receive a further error"An error occurred, not all of the updates were successfully uninstalled"
I have also tried the above whilst running Windows in safe mode and the same errors are received.
Also tried the following:
Disable all Antivirus softwareAt command prompt; Net Stop WuAuServRename "C:\Windows\SoftwareDistribution"     to     "C:\Windows\sdold"Try installing download update "KB929777" - Unable to installAt command prompt; Net Start WuAuServTry running windows updates and, still receive the "Error Code 8000FFFF"
I have also tried the above in safe mode, however the service "WuAuServ" does not run in safe mode,tried installing the update "KB929777" and receive the error "Installer encountered an error: Ox8007043c. This service cannot be stared in Safe Mode"
I have also tried the following:Removing 1gb of RAM, Re-installing a previous ... Read more

More replies
Relevance 63.96%

Hello,

I recieve error C80003FA whenever I do a Windows Update run. It doesn't get past the stage of checking for updates.

I've tried several fixes including:
- Waiting 15 minutes and running Windows Update again.
- Letting Windows Update run on its own schedule.
- SFC /Scannow
- Renaming the Catroot2 Folder.
- Running 3 different Fixit tools.
- Clean windows install.

After each and every one of those fixes I've tried windows update and I still get error C80003FA.

SFC Scannow has previously said no errors, but the last run through it said there were unfixable errors. I've got the log, though for brevity's sake I will keep it until someone asks for it.

Any ideas?

Thanks.

Answer:Windows Update fails in Update Check. Error code C80003FA.

Clean windows install doesn't fix it? You must be blocked, maybe your firewall???

9 more replies
Relevance 63.96%

Hi everybody

I get windows update error code 2 on installing Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 7, Vista, Server 2008, Server 2008 R2 x64 (KB2978128)
I have also some other errors installing Internet Explorer 11.

I have used "sfc /scannow" command but it didn't find any integrity violations. the CBS log is attached.

I have also used SUR and the log file can be found attached to this post.

Any help is appreciated.

Answer:Windows update error code 2 on installing security update .NETF 4.52

Not as bad as I thought from the file size of the CheckSUR log...


Code:
Summary:
Seconds executed: 626
Found 40 errors
CSI Manifest All Zeros Total count: 40
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-ie-ieshims_31bf3856ad364e35_10.2.9200.20916_none_ae6c710c2475d6dd.manifest
winsxs\manifests\amd64_microsoft-windows-ie-ieshims_31bf3856ad364e35_10.2.9200.16798_none_c5578c400ab73d40.manifest
winsxs\manifests\amd64_microsoft-windows-scripting-jscript9_31bf3856ad364e35_10.2.9200.20916_none_ab08cdc647ee4ac0.manifest
winsxs\manifests\amd64_microsoft-windows-ie-extcompat_31bf3856ad364e35_10.2.9200.20916_none_a38eed1960d6da24.manifest
winsxs\manifests\amd64_microsoft-windows-i..ersandsecurityzones_31bf3856ad364e35_10.2.9200.16798_none_32ad7426474825c0.manifest
winsxs\manifests\amd64_microsoft-windows-ie-ratings_31bf3856ad364e35_10.2.9200.16798_none_455c9a9ecd397534.manifest
winsxs\manifests\amd64_microsoft-windows-ieinstal_31bf3856ad364e35_10.2.9200.16798_none_66663569022097ee.manifest
winsxs\manifests\amd64_microsoft-windows-ie-extcompat_31bf3856ad364e35_10.2.9200.16798_none_ba7a084d47184087.manifest
winsxs\manifests\amd64_microsoft-windows-js-debuggeride_31bf3856ad364e35_10.2.9200.16798_none_b8c293a66f3311dc.manifest
winsxs\manifests\amd64_microsoft-windows-ie-runtimeutilities_31bf3856ad364e35_10.2.9200.20916_none_ae82eb7016c1044d.manifest
winsxs\manifests\amd64_microsoft-windows-ie-lowreg_31bf3856ad364e35_10.2.9200.20916_none_0f2b73186e1... Read more

9 more replies
Relevance 63.96%

Hey all,

So I am currently reinstalling Windows on my dad's old laptop after the hard drive decided up die on us, and I stumbled on a problem that's a bit too hard for me to fix.

Namely, I am completely unable to install any Windows Update. Not even MSE will install.

I tried running SURT, but got error code 0x8000247
I also tried running SFC /SCANNOW, it ran the verification fase until 98% and then stated that there where unfixable problems.

The displayed error codes are:
In WU: "8024A000"
In SURT: "0x8000247"
Whilst installing MSE: "0x80070643".

Attached you will find CBS.log and MSINFO with my system specs.
Cheers and many thanks in advance,
Nommy

CBS.log MSINFO32.nfo

Answer:Windows Update error code 8024A000; unable to install any update.

That's very reminiscent of similar errors in Win7 - and I wouldn't be surprised to see it being non-genuine.
Please post an MGADiag report BEFORE doing the below potential fixes.

This may simply be caused by a bad set of Intel Storage Matrix Technology drivers -

Installing the Intel Drivers
try downloading and installing them from here -
https://downloadcenter.intel.com/Det...&DwnldID=17882

(IATA89ENU.exe)

Once complete, please reboot twice, then post another MGADiag report.


If nothing has changed, try this...

Please run the following commands in an Elevated Command Prompt

NET STOP CRYPTSVC
REN C:\WINDOWS\SYSTEM32\CATROOT2 CATROOT2OLD
NET START CRYPTSVC

once complete, leave the system alone for at least an hour to rebuild the database, then reboot, and run another MGADiag report and post the results.

If neither of them work, we'll re-evaluate.

9 more replies
Relevance 63.55%

Hello,
First, excuse my english, I'm trying my best.

I get error C80003FA whenever I do a Windows Update run.

I did the Windows Update Posting instructions. When I did the SURT installation, it didn't finish and I had to reboot the PC. Then it work.

I've tried sfc /scannow several times before with different results: sometimes finished with no errors, sometimes finish with unfixable errors and sometimes didn't finish at all.

I uploaded the CBS.zip

Hope you can help me, thanks.

Answer:Windows Update doesn't update. Error code C80003FA

There are no errors in any of the posted logs
Please post the C:\WIndows\windowsupdate.log file.

Please also post the event logs...

Open Event Viewer
click on the Windows logs entry in the left pane to expand it.
Now click on the Application entry - wait while it loads.
Click on 'File' in the menu bar and select Save...

Save the file as Appevt.evtx

Repeat for the System log

then zip both, and upload them.

9 more replies
Relevance 63.55%

My Windows Update has been failing to update for a while now and I can't seem to find the solution. Here's the run-down of what happens step by step:Launch an update scan for Windows Update
It scans for a few seconds then says:





Quote:
Install new Windows Update software

To check for updates, you must first install an update for Windows Update.



Once I click Install it begins to "Install and Update," but then immediately returns to "Checking for Updates."
The next box I see says:





Quote:
Windows could not search for new updates

An error occurred while checking
for new updates for your
computer.

Error(s) found:
Code 800F081F


This happens every time I've attempted to update. After looking up the error code, I found the main Windows site that gave me the following explaination:
If you receive Windows Update error 800F081F, it means that Windows Update or Microsoft Update cannot determine the cryptographic service provider, or a file Windows Update requires (named catalog store) is corrupted.

I've looked through multiple Windows forums and How-To's and have tried all the fixes I found. SURT, sfc/ scannow, the standalone download for WU, Windows Update Diagnostic, multiple malware scans, and Microsoft Fixit. Ultimately, I always get the same error code, (800F081F).

I should also say this problem has been here for a few months now, and it's becoming more worrisome as more time passes. The longer I... Read more

Answer:Windows Update fails to update, error code 800F081F

Hi Mookeylee & welcome to Sevenforums.

Please follow Windows Update Posting Instructions

We need to see the logs to determine the cause of the error.

Worst case scenario, and last resort, repair install windows 7. No big deal I just did 2 yesterday win7x64 Home Premium. Brink posted a great tutorial Repair Install.

3 more replies
Relevance 63.55%
Question: error 0x8007001F

I recently installed PartitionMagic 8.0 on my computer. After checking through the 'compatibility issues' dialog boxes, I proceeded to run it.
As it ran, I received various 'error' reports about one of my hard drives. I clicked yes, thinking that nothing bad would happen, and PMagic still wouldn't start, Error 117.
So, I wanted to uninstall it in "Add or Remove Programs" and as I clicked uninstall, the system started to restart by itself and it is giving the message that "Launch System Repair".
When I choose that it failed to fix it, and I selected System Restore from the advanced options menu. It wouldn't start, and at the time I didn't really read the error, but I think it was different.
Went back to it later, hoping by some black magic that it would start, and it obviously didn't. I inserted the Recovery Disc's and Windows 7 home basic Disc to see if I could repair it. I again selected advanced to find System Restore again.
Upon selecting it, I was greeted with this:

Code:
There was an unexpected error:
A device attached to the system is not functioning. (0x8007001F)
Please close System Restore and try again.
After closing and re-opening it, I got the same message.

I have just bought the laptop and wanted to partition the hard drive and this happened.

OS:Windows 7 Home Basic

Please, help me fix this problem...

Thanks, in advance.........
 

Answer:error 0x8007001F

Hmmm I wonder if Partion Magic 8.0 is even compatible with Win7.
Maybe you could look at a previous post on this subject:

http://forums.techguy.org/windows-7/944171-system-restore-error-0x8007001f-device.html

Good luck
Ray
 

3 more replies
Relevance 63.14%

I didn't see any posts about this, so I hope I am not double posting.

After removing a drive load of viruses, I am still not able to update Windows Vista to Service Pack 1. I have even tried to create a new admin user account in hopes that this would work, but no go. I tried running sfc.exe / scannow from the CMD and it did report that it was unable to repair wextract.exe. Also, the file reportingevents.txt located in %system root%\windows\softwaredistribution\reportingevents.txt lists "Windows Update Client failed to detect with error 0x80070490".
Although, I think Windows Defender can update. I need to take a break.

Acer Extensa 4620-4605
Windows Vista 32-bit Home Premium

More replies
Relevance 63.14%

After buying a new hard drive and reimaging thumb drive from Dell, I installed Windows 7 Ultimate on a Dell M6400 Precision Laptop. I have everything working except Windows Update will not Update. It has not updated once since the install. Windows Tech
support has not been able to resolve the issue, even with remote assistance. I get the Error Code 0x80070003 after running the Windows Update Diagnostic Tool. Does anyone know how to fix this?

More replies
Relevance 63.14%

Been using Google and such for a couple months messing with it but cant get update to work. My girlfriend updated from Vista a while ago and I cant crack this! I have done all the differect things I could find from Microsoft to no avail. The fixit program finds something and says its fixed but still doesnt work.

Any ideas you all could give would be great! Thanks.

Answer:Update for Windows Update Error Code 800700B7

Hello bobo and welcome am no expert mate but take a look at this Windows update KB2532531 gets error code 800700B7 - Microsoft Community

9 more replies
Relevance 62.73%

When I try and go under Pogo.com to play games this is what comes up in Event Viewer (I have alot of errors under my event logger)

Log Name: Application
Source: Microsoft-Windows-Search
Date: 8/15/2009 9:03:13 PM
Event ID: 3013
Task Category: Gatherer
Level: Error
Keywords: Classic
User: N/A
Computer: Admin-PC
Description:
The entry <C:\USERS\ADMIN\APPDATA\ROAMING\MICROSOFT\WINDOWS\COOKIES\LOW\DESKTOP.INI> in the hash map cannot be updated.

Context: Application, SystemIndex Catalog

Details:
A device attached to the system is not functioning. (0x8007001f)

Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Search" Guid="{CA4E628D-8567-4896-AB6B-835B221F373F}" EventSourceName="Windows Search Service" />
<EventID Qualifiers="49152">3013</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-08-16T01:03:13.000Z" />
<EventRecordID>17888</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<C... Read more

Answer:Vista Error 0x8007001f

Are you running a soundblaster or some other Creative Labs sound card?

8 more replies
Relevance 62.73%

 Attempting to place orders for the x220 fail with an "(An error has happened in processing your order. Please try again later (Error Code 024))" at the second ( 2 of 2 ) stage of check out.   Browsers: Firefox 4, IE 9, IE 8, Chrome, OperaPay by paypal, pay by amazon and pay by Lenovo all fail. Guest checkout fails,  logged in user checkout fails, purging cart then re configuring fails, etc.This error state has persisted for the past ~5 hours. Is anyone else experiencing this?  On an asside, orders for the x220 tablet ( not due out till late next month ) seccede!  SLR- 













Solved!

Go to Solution.

Answer:x220 orders fail with (Error Code 024)

I am also experiencing the same issue. It's quite irritating. I would just like to be able to order a new machine.

9 more replies
Relevance 62.73%

I am using Vista Home Premium. My windows update program is failing to install 11 updates since 20/8/2007. They all fail with error code 80070426. I can't find any solution looking at the Microsoft site.I suspect that an action I took to fix another problem may have caused this one. I was away on holiday for the first 3 weeks of August and when I returned and started using my PC I found my CD/DVD RW drive and my external hard drive could not be accessed. I tried a system restore to the previous day but this did not work. Then I did a system restore to the start of August and this fixed the problem. It is possible these updates had been installed but in doing the system restore the record of the install was destroyed causing this problem.Any idea what I should do?

More replies
Relevance 62.73%

Windows Updates fail with error code 80073712. Have deleted Software Distribution, stopped and restarted the Windows Update service, SUR tool installed and ran, SFC /scannow reports no integrity violations. CBS log file attached for DISM.exe /Online /Cleanup-image /Scanhealth

DISM.exe /Online /Cleanup-image /Restorehealth
Error: 87
The restorehealth option is not recognized in this context.
For mor information, refer to the help.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

Answer:WUpdates fail, error code 80073712

CheckSUR found the followingproblems...

Code:
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-w..lient-ui.deployment_31bf3856ad364e35_7.6.7600.320_none_2bc45c3e65319d38.manifest
winsxs\manifests\amd64_microsoft-windows-w..oyment-languagepack_31bf3856ad364e35_7.6.7600.320_en-us_9480e83e143a2b9d.manifest
winsxs\manifests\amd64_microsoft-windows-w..ent-core.deployment_31bf3856ad364e35_7.6.7600.320_none_af4247f6d9404079.manifest
winsxs\manifests\amd64_microsoft-windows-w..-activex.deployment_31bf3856ad364e35_7.6.7600.320_none_3bdffcf0c6c9baea.manifest
winsxs\manifests\amd64_microsoft-windows-w..oyment-languagepack_31bf3856ad364e35_7.6.7600.320_en-us_f472bced9fa3f21b.manifest
winsxs\manifests\amd64_microsoft-windows-w..oyment-languagepack_31bf3856ad364e35_7.6.7600.320_en-us_743e1b456f9dad72.manifest
winsxs\manifests\amd64_microsoft-windows-w..oyment-languagepack_31bf3856ad364e35_7.6.7600.320_en-us_7f238fa6bfd1b97a.manifest
winsxs\manifests\amd64_microsoft-windows-w..date-adm.deployment_31bf3856ad364e35_7.6.7600.320_none_2c005c4c3b15478b.manifest
winsxs\manifests\amd64_microsoft-windows-w..ient-aux.deployment_31bf3856ad364e35_7.6.7600.320_none_0999a9f081cc9852.manifest
winsxs\manifests\wow64_microsoft-windows-w..owsupdateclient-aux_31bf3856ad364e35_7.6.7600.320_none_c65c31ce99b0eafe.manifest
winsxs\manifests\amd64_microsoft-windows-windowsupdateclient-ui_31bf3856ad364e35_7.6.7600.320_none_53a370daf19412b1.manifest
winsxs\manifests\amd64_microsoft... Read more

7 more replies
Relevance 62.32%

I was given an HP Compaq Presario C500 that was headed for the garbage because it would not connect to the internet. After running several scans ESET online scanner came up clean. Installed Microsoft Security Essentials and installed SP1, and can't get it to install SP2. I keep getting error code 80070017 / Windows Update encountered an unknown error.

I would prefer to reformat but Recovery Manager restarts back into Windows and I have no disks.

Can provide a long list of what has been done if needed including WU Modules (Normal Mode) and WU Components fixes. Permissions point in every which way but the correct way!

Any help would be much appreciated!

Free space is presently @ 42.3 GB of 68.9 GB on C: Drive (started out with 7.3 GB's free space! )
and 4.91 GB free of 5.53 GB on Presario_RP (D)

Specs as follows:
Vista Home Basic
Intel (R) Celeron (R) MCPU
[email protected] 1.60GHz 1.60 GHz
512 MB RAM
32-bit OS
Denied access to the CBS folder itself though can access CheckSUR.log which I am including along with sfcdetails.

=================================
Checking System Update Readiness.
Binary Version 6.0.6001.22375
Package Version 5.0
2010-10-04 19:57

Checking Deployment Packages

Checking Package Manifests and catalogs.

Checking package watchlist.

Checking component watchlist.

Checking packages.

Checking component store
Summary:
Seconds executed: 2478
No errors detected
=================================
Checking System Update Readiness.
Binary Version 6.0.6002.224... Read more

Answer:Error code 80070017 / Windows Update encountered an unknown error

Checking Component Store
(f) CSI ReadFile Failed 0x00000017 winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990\wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990
(f) CSI Payload File Corrupt 0x00000000 wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990



You have corrupted C:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f699
folder thus this issue with updates ,I'm not fully sure it's only issue with wcp.dll or with full folder.For precaution I recommend replace all files in this folder.

How to fix:

1.First prepare special recovery disk Create a Recovery Disc
and make sure boot order in your BIOS is CD-ROM,C,A
(if you don't know how to to do that then check your computer manual)

2.Download attached to post FixPacks.zip file -in zip file is packed Packs folder -you have to unpack it and place directly on C: exactly as I show below:

Click this bar to view the full image.
3.Boot burned special recovery disk (if you don't have Vista DVD instead use special recovery disk )
Choose language>>Repair Computer>>WinRE>>command prompt

and type:

robocopy C:\Packs C:\ /E /IS

press ENTER

del C:\Windows\Logs\CBS\*.*

press ENTER

4.Back to your system and run Readiness Tool again.
5.Try install SP2 from Microsoft Dow... Read more

49 more replies
Relevance 62.32%

I have been having problems installing 8 updates since early May 2012. I am getting the error code in the title line.

The updates are:

[LIST][*]Security Update for Microsoft Office 2007 suites (KB2596672)[*]Security Update for Microsoft Office 2007 suites (KB2596792)[*]Security Update for Microsoft Office 2007 suites (KB2596880)[*]Security Update for Microsoft Office 2007 suites (KB2597162)[*]Security Update for Microsoft Office 2007 suites (KB2597969)[*]Security Update for Microsoft Office Excel 2007 (KB2597161)[*]Security Update for Microsoft Office Word 2007 (KB2596917)[*]Update for Microsoft Office Outlook 2007 Junk Email Filter (KB2687267)

I have run FixIt, but to no avail. I have also turned off services and rebooted and ran Windows Update and still got this error.

Do I need to just skip these updates, or somehow troubleshoot this and fix it. If I need to fix it, I need help.

Regards, and thanks.

More replies
Relevance 62.32%

Hi,
I have been having some recurring problems with the attempts to install some automatic windows updates.

Security Update for Microsoft Office Acess 2007
Security Update for Microsoft Office Outlook Junk Email Filter

I am not able to install these updates, maybe any other updates in general. After attempting the install the following install window says, "Windows Update encountered an unknown error." Next to it an error code 80070643. Microsoft provides a solution to the problem, by re-installing Microsoft NET. Framework. They also provide a link to the program NET. Framework cleanup tool that enables you to uninstall NET. Framework, and it's components.

I followed Microsoft's instructions to solve the issue, though I've been put at a standstill. I have used the NET. Framework Cleanup tool to uninstall NET. Framework and it's components (states that it uninstalls all versions, 1.1 SP1 1.1, 2.0, 3.0, 3.5.) Then afterwards instructed to reinstall NET. Framework, specifically in an order, 3.5 then, 1.1, then 1.1 SP1. I start with 3.5, then as the installation starts it says that to contiunue installation I must turn off or on windows features in the Control Panel. I do so and turn off all Windows features. Then continue and it again states to turn off features in the Control Panel.

I wasn't able to continue the process, and I am also concerned that this is the same error that made me unable to install Microsoft Security Essentials, (as t... Read more

Answer:Error Code 80070643, Windows 7 Update error, can't install updates.

Hello?
Waiting for a day no one seems to be replying.
 

1 more replies
Relevance 62.32%

I get an error every time when I try to install important updates. I get an error code 80070BC9.  Also ever since I have had my new computer I can never install programs such as itunes,sony vegas, and i cant even install microsoft redistributable packages and it tells me i need it and i cant install dotnet stuff either. And I get error 1935 when installing those kind of programs. PLEASE HELP!!! Here is the update history for one of the updates that failed there are 4 more.Microsoft .NET Framework 3.5 SP1 Update for Windows 7 and Windows Server 2008 R2 for x64-based Systems (KB982526)Installation date: ‎12/‎4/‎2010 9:09 PMInstallation status: FailedError details: Code 80070BC9Update type: ImportantThis update addresses a set of known issues of the Microsoft .NET Framework 3.5 Service Pack 1. After you install this item, you may have to restart your computer.More information: http://go.microsoft.com/fwlink/?LinkId=190967Help and Support: http://support.microsoft.com

Answer:Windows Update Error Windows 7 Error Code 80070BC9 and Installation Errors

Check or see this thread --> http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/2a2e6aae-e29d-45ee-b000-bf51ded07661

10 more replies
Relevance 62.32%

Good evening all,

Just to flag that this has also been posted in W7 Support sub-forum here:

Other thread

Re. the instruction thread - the link to DSS doesn't seem to work, and GMER is for 32-bit only. If there's anything I can do to kick things off, please let me know and I'll do it!

I've googled extensively around the issues I am facing, and tried all proposed solutions, but none have worked thus far.

Symptoms:I have 1-2 minutes of freedom after booting, then I can no longer run new programmes. I also cannot close some programmes e.g. Skype. Tabs in Chrome spazz, flash player dies, and any new navigation ends up with an eternal hanging/loading problem.
Unable to restart/shutdown conventionally (I have to do it physically)
I get the error "Failure to display security and shut down options ..." when I try ALT+CTRL+DEL

Safe mode is absolutely fine, so I assume it's not anything hardware related (though please correct me if I'm being naive). My second drive which runs off XP, which I only use for storage now, boots fine and has no problems.

I have not installed any new drivers, programmes, or otherwise made any meaningful changes recently.

Solutions I've tried:Reset winsock.
Shut off all start-up programmes using MSCONFIG.
Run virus scan at boot-up, deleted 2 items (win32 installmate ... prob trojans? Was an .exe that I had downloaded but never ran).
Run Malwarebytes scan, deleted 1 fairly innocuous item.
Run full scan-disk check.
Run a SFC scan... Read more

Answer:windows update fail or statup programs fail cant do much of anything please help

Hello chivalrousgent and our apologies for the oversight of your thread.

Do you still require assistance?

3 more replies
Relevance 61.91%

Hello all,
I have an issue with my WIndows Updates, I am getting error code 0x80040154 and all the sites I checked did not help.

Here is my Windows Update log:
Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: 117cab2d-82b1-4b5a-a08c-4d62dbee7782""
CoCreateInstance Failed: hr = 0x80040154
Failed to retrieve SLS response data for service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, error = 0x80040154
Caller Service Recovery failed to opt in to service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0X80040154

Checked in the Registry and here is what is listed
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Services\Pending\117cab2d-82b1-4b5a-a08c-4d62dbee7782

I have tried everything to get it to the correct location without any luck.

SFC / DISM / ResetWUEeng / WinFixit / and the list goes on.

I also deleted it and broke my computer and could not restore it. Had to start all over again and still received the same error message.

Does anybody have any suggestions. Thanks.

Answer:Registry Error - Windows Update - Error Code 0x80040154

Welcome to the forum kaltland.
Link below is for Windows 10 Update Troubleshooter...

After the troubleshooter finishes, try running Windows Update again and install any available updates.

https://aka.ms/wudiag

58 more replies
Relevance 61.91%

When i try to install my windows update, i always get both error code 800F0900 and 800B0100. i tried installing the updates manually, used MS Fix it and the system update readiness tool. I use sfc /scannow and it says "No integrity violations found". Still error. Can anyone help? I have uploaded my CBS zipfile to googledrive CBS.rar - Google Drive. (Since datahost is not working.) and attached the sfc text file overhere.

I have tried Windows Update Troubleshooter then tried windows update again and a new error Code 80246007 appear.
Hope you guys can help me solve it.

This is my Farbar scan.

Farbar Service Scanner Version: 26-07-2015
Ran by Finance Server (administrator) on 19-09-2015 at 17:00:41
Running from "C:\Users\Finance Server\Downloads"
Microsoft Windows 7 Ultimate Service Pack 1 (X64)
Boot Mode: Normal
****************************************************************

Internet Services:
============

Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo.com is accessible.


Windows Firewall:
=============

Firewall Disabled Policy:
==================


System Restore:
============

System Restore Policy:
========================


Action Center:
============


Windows Update:
============

Windows Autoupdate Disabled Policy:
============================


Windows Defender:
==============
WinDefe... Read more

More replies
Relevance 61.91%

When i try to install my windows update, i always get both error code  800F0900 and 800B0100. i tried installing the updates manually, used MS Fix it and the system update readiness tool. I use sfc /scannow and it says  "No integrity violations found". Still error. Can anyone help? I have uploaded my CBS zipfile to googledrive http://tinyurl.com/ogyfd3y.(Since datahost is not working.)  and attached the sfc text file overhere.
Hope you guys can help me solve it
 
This is my Farbar scan.
 
Farbar Service Scanner Version: 26-07-2015
Ran by Finance Server (administrator) on 19-09-2015 at 17:00:41
Running from "C:\Users\Finance Server\Downloads"
Microsoft Windows 7 Ultimate  Service Pack 1 (X64)
Boot Mode: Normal
****************************************************************
 
Internet Services:
============
 
Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo.com is accessible.
 
 
Windows Firewall:
=============
 
Firewall Disabled Policy: 
==================
 
 
System Restore:
============
 
System Restore Policy: 
========================
 
 
Action Center:
============
 
 
Windows Update:
============
 
Windows Autoupdate Disabled Policy: 
============================
 
 
Windows Defender:
==============
WinDefend Service is not running. Checking... Read more

Answer:Error code 800F0900 and 800B0100 windows update error

Please download and run the Windows Update Troubleshooter.
 
Clicking on the link above will start the download automatically.
 
Please post the results in your topic.  Do not use a host website to post this.  If the information needs to be downloaded I will not do this.  I will not download anything to my computer unless I know exactly what it contains.

5 more replies
Relevance 61.91%

I have a lenovo yoga 500 with windows 10 64 bit . The system was getting very slow and the update was not hapening and always comes with the error code 0880073712.
Tried to restore , rest and even tried to install OS again . still its like that. Pls let me know how to come out of this issue .

More replies
Relevance 61.91%

Hello! I was checking my Laptop's health this month and I was so surprised to see the Window's defender is not started. I clicked the "Start Now" button but a window says: "Windows Defender cannot be started". I checked the firewall. The Private and Public network firewall is off. I turned them on. I opened the windows defender again and clicked the "start now" button. A window appeared. Now it says: "The specific Service does not exist as an installed service. (Error Code: 0x80070424). I also tried using the "Windows Update". It's almost several months since I last got an update. And as far as I know, I set the option to "Notify me when new updates are available". I opened control center and windows update. But the windows update panel says: "Always install updates to enhance your computer's security and performance". I clicked the "Check For Updates" button. But another window says: "Windows update cannot currently check for updates, because service is not running. You may need to restart your computer." I checked the services. The Security Center has been started. But "Windows Defender" & "Windows Update" was not on the list! I scanned for malicious programs with my own Antivirus. I found some threats. But definitely that's a low threat and it wouldn't make changes on my system (because I always check each file before opening). Please help!

~~~~Bryan James

Answer:Security Center Fail, Error code: 0x80070424

BryanJames16,

Please go to: Downloading Farbar Service Scanner


Make sure the following options are checked:Internet Services
Windows Firewall
System Restore
Security Center/Action Center
Windows Update
Windows Defender
Press: Scan


When done, the tool creates a report (FSS.txt) on the Desktop.

Please provide the FSS.txt in your reply.

3 more replies
Relevance 61.91%

Machine type: Gateway DX4300-03 (desktop)
Operating System: Vista 64bit
Processor: AMD Phenom 9750 quad core

I recently used the built in restore provided by gateway, I picked the option to restore to factory defaults and save my data.

Upon attempting to apply the updates I am getting error code 80072F8F which states that there is an issue with time the machine not being correct. However, that is not the situation and the time is correct.

Next I tried to use the Microsoft repair update tool however it failed to run giving me the same error.

Any advice would be greatly appreciated.

Answer:Updates fail after system restore with error code

Hi,

You say the time is correct but is the region for your time zone correct too? i.e +1 hr setting too.

Check closely for time date & month plus year...... etc

2 more replies
Relevance 61.91%

When I try to create a system image on a network location Windows asks for Network credentials for the target location. The credentials I enter are correct but I always get an error message that the location can't be used because the password is not correct (Error code 0x80070056).
Is this a bug in Windows 7? Any way to fix or work around this?

Answer:Network credentials fail (Error code 0x80070056)

Btw. it's a netdrive - D-Link DNS-323. And the drive I want access for the backup is already mapped to my computer.

3 more replies
Relevance 61.91%

I get a 2000-0511 Processor Fan Fail error and cannot correct it. I tried updating the driver and cleaning the air vent slots at the bottom but I still get the error. The machine is still under warranty until 12/2/2017.
How can I fix this or can I send it back t Dell for repair?
agchan1

Answer:Inspiron 13 5368 Processor Fan Fail Error Code

Hi AGCHAN1,
Does the system overheat? Do you hear the fan spin?
Update the BIOS and restart and check.
If the issue stands unresolved, Restart the system and press f12 key on startup - choose diagnostics. Let it run the diags and if you encounter any errors - make a note of the complete error and report the same to us. These are onboard diagnostics and they might possible pick some error if the hardware is not functional.
Also, please click my DELL-username and write me a private message with the service tag and your Name for case records. Based on the warranty and region, we can setup the service call.
Let us know if you have any other queries.

1 more replies
Relevance 61.91%

Thread started here (and the BSOD's should now be resolved: Unknown BSOD on Mother-in-laws system

I had 2 problems in that thread, the second led me through a Google search back to this forum in another thread here: Windows Check for updates keeps running-all installation/updates fail

After completing the steps in post 83, the issue is now worse. Instead of getting to 18% of a elevated scannow, it goes straight to "Windows Resource Protection could not perform the requested operation."

I have tried "Microsoft's System Update Readiness Tool" as advised here: Fix Windows Update and other problems with Microsoft's System Update Readiness Tool | Wilders Security Forums

I have the CBS log attached.

I have tried the solution here, however the key exists: Windows Modules Installer Error:126 - Microsoft Community

I have run Tweaking.com - Windows Repair to reset permissions, this hasn't helped.

Suggestions please.

Cheers

Answer:Updates Fail: Error Code 80070570 and 80073712

I rather seems as if you've been trying fixes at random - which is never a good idea.
You appear to have major problems with your registry:

Code:
2015-04-21 04:00:28, Info CBS Starting TrustedInstaller initialization.
2015-04-21 04:00:28, Info CBS Failed to get full path for string: [HRESULT = 0x8007007b - ERROR_INVALID_NAME]
2015-04-21 04:00:28, Info CBS Failed to expand path from onine store: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\ [HRESULT = 0x8007007b - ERROR_INVALID_NAME]
2015-04-21 04:00:28, Info CBS Failed to find servicing stack directory in online store. [HRESULT = 0x8007007b - ERROR_INVALID_NAME]

I need to have a look at your COMPONENTS registry hive

Please copy the C:\Windows\System32\config\COMPONENTS file (no extension) to your desktop and then compress it - upload the compressed file to your favoured fileshare site (preferably Dropbox or OneDrive) and post a link.

9 more replies
Relevance 61.91%

Pre-emptive update:

Ok, just plugged the same peripheral into the back ports again, to check something, and it's now working again,
for no apparent reason. I know it might make this post a little redundant, but I'd like to know if anyone has any
idea what caused this in case it becomes repetitive.


The USB ports at the back of my new computer stopped working recently. I Googled the error code (10) and got this:

A. Click on Start
B. Right Click on My Computer, click on Properties
C.Click on the Hardware tab
D. Click the Device Manager button.
E. Expand Universal Serial Bus controllers section.
F. Right-click every device under the Universal Serial Bus controllers node, and then click Uninstall to remove them one at a time.
G. Restart the computer, and allow the computer to reinstall the USB controllers.
H. Plug in the removable USB storage device, and then test to make sure that the issue is resolved.

I’d like to clear some things up before I start.
1) My mouse and keyboard are USB. I therefore suppose that as soon as I uninstall the port they’re attached to they’re going to stop working. I should probably use a PS2 mouse for the operation right?
2) When it says let the computer reinstall the drivers, it should do this automatically right? I don’t need to insert or reinstall from the driver disk?
3) Would anyone have a clue why all my USB ports stopped working at once? They originally threw up a 10 code, but afterwards moved on to a 43. The reason my Mo... Read more

Answer:Solved: USB ports fail to work - Error code 10

Most likely dust in a port somewhere...a good spraying with a "can of air" into all the usb ports inside and out and a general dusting out of inside usually clears this up.
 

3 more replies
Relevance 61.5%

When i try to search for new updates on windows update i get this error code : 800F0900.
I have used MS Fix it and the system update readiness tool. Still error. Can anyone help?
 
I saw in a old post somebody used the CheckSUR.persist.log to fix it. I can upload mine if needed

Answer:Error Code 800F0900 Windows Update Error

Hi to BleepingComputer,
 
 
Let's see what we can find...
 
  Check Windows System files integrity
open the Command Prompt as Administrator (Tutorial)
type the following command and press Enter:
sfc /scannow
Note: This may take some time to finish.if it doesn't say "No integrity violations found" them do this:
In the command prompt window, type or Copy & Paste the following:
findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >"%userprofile%\Desktop\sfcdetails.txt"

Close the command prompt.
Attach to your post the sfcdetails.txt file that was just placed on your Desktop
You can safely delete the sfcdetails.txt file afterwards if you like
 
Check some windows critical services...
Farbar Service Scanner (FSS)
Download Farbar Service Scanner and save the file to the Desktop.
Run FSS
Check all the options
click Scan
Post the generated log in your reply.

9 more replies
Relevance 61.5%

Hi -
I'm not getting Windows Update to run. HP p6240f, Windows 7, 64-bit OS
When I go to shutdown, the shutdown button has an orange shield that indicates it wants to update.
If I go to Windows Update and and say "Check for Updates", it tells me to Install new Windows Update software. I press Install Now and get "windows could not search for new updates. Error found Code 8024DFFE Windows Update encountered an unknown error". When I press "Get Help with this error", I select Windows Update Troubleshooter, which opens a Diagnostics Troubleshooting Wizard, which opens "Window Update, find and fix problems with Windows Update", which runs a repeating cycle of Detecting problems, collecting files, checking registry, Resolving problems .... over and over until it finishes eventually saying that it was not able to fix all the problems. In particular is a new "Windows Update error 0x80070490(2014-08-29-T-09_02_42P)". I attach the picture. I've done this a bunch of times, including rebooting to see if that matters.

This happened a week ago and the same thing happened as in the preceding paragraph, except that afterward - even though it gave all the same error codes - the Windows Update successfully ran.

I found a suggestion on a MS Windows site to run (in an administrator's Dos window) sfc /SCANNOW, which takes a long time to run and I did so and it found nothing and still the problem exists.

I found a note from a Go... Read more

Answer:Windows 7 Update Error, Error Code 8024DFFE

Hi. Firstly, thanks for the info. I had encountered the same problem with windows update error 8024DFFE on my Acer 4830, Win7 64bit 2 days ago and was trying to find a solution online without any success. But then I came across ur post and realized that I have a similar configuration as you. I also uses comodo firewall and avast antivirus. This led me to think that either one of them is the problem. I disable the firewall and can now check for updates. How that helps.
 

6 more replies
Relevance 61.09%

Since mid October I've been having problems installing windows updates. I always get an error message with a code 646. The failed update is security for microsoft works 8. I've tried some solutions listed in older posts such as the notepad and command prompt, that didn't work. I went to microsoft's website to dowload the update directly from there and that didn't work... what else could I try???
 

More replies
Relevance 61.09%

Hi I was wondering if anyone knows how to fix this windows update problem. The windows update window says Error code 490, I am also receiving error 800736B3 as noted below

Any help someone can lend is greatly appreciated

Thanks

Answer:Windows update error code 490

after successfully getting that update to install which I didn't think was the entire service pack, I rebooted and another update pops up for Win 7 SP1 and that one throws another error. 800736B3

8 more replies
Relevance 61.09%

How can I install Windows Update. I keep getting Error Code 646 - Help!

Answer:Windows Update Error Code 646

http://lmgtfy.com/?q=Error+Code+646+

3 more replies
Relevance 61.09%

hi i keep getting a windows update error code its Code 80070002 and every time i restart or start my computer it pops up windows update 3/3 0% complete and then just goes to my desktop while its still on 0%

More replies
Relevance 61.09%

Hi all
first post, hoping you can help where my searches on Google have failed!!!

Basically running Vista, and unable to run any of the Windows Updates, each time it brings up the same error, Code 6D9E.

The only mention I have found is to uncompress the MySQL fiel in programs which I have done, but still no joy. Have tried to run update in safemode, but it wont allow me do this this either

HELP!

(Did that sound desperate...!)

Thanks

Mike
 

Answer:Windows Update Error Code

hi here are a couple of things to look at http://support.microsoft.com/kb/906602also here http://support.microsoft.com/ph/6527and here http://support.microsoft.com/kb/822798 maybe one will be of help
 

2 more replies
Relevance 61.09%

Windows 7 Professional Service Pack 1

I have been trying unsuccessfully to do all of the helps to get Windows Update to check for updates and install. I tried all of the Fixit and Windows Update Troubleshooter batch files, etc. I thought I was making headway this morning when it said updates would install on the next shutdown. So I shutdown. Looks like 57 updates had a failed status. When I ran the check for updates again, I get the following error code:
C80003FA

I googled and really only found the same help items I have already tried, the fixit's etc.

Thanks for any help you can give me.
 

Answer:Windows Update error code

We know nothing about your computer, other than it's running Windows 7 Professional SP1, so do the following in it.
Download and save the TSG System Information Utility (SysInfo.exe) to the desktop.
After it's been downloaded and saved, double-click it to run it.
Information about your computer will appear.
Return here to your thread, then copy-and-paste the ENTIRE text here.

--------------------------------------------------------------
 

2 more replies
Relevance 61.09%

any way to fix this without reinstalling windows 7

Answer:Windows update error CODE 52F

Hi,

Code 52F is related to Microsoft Office updates - please see if the links here help.

Windows Update error 52F

Regards,
Golden

2 more replies
Relevance 61.09%

did update on Windows
 I have windows 7
got an error code of
_80070570
What does it mean?
how do I fix the error to continue updates.

More replies
Relevance 61.09%

For more than one year, my automatic Windows Update process has unsuccessfully tried to install (around once a day !) KB3001652 (Visual studio 2010 Tools for Office Runtime). I haven't seen any problem with other automated Updates of Windows, MS Office, NET.Framework, etc....

I have tried first "Fix-It" which doesn't produce any error message. Secondly I launched "SURT", which tells me "This update doesn't apply to your computer". "SFC /scannow" doen't report any violation issue.I don't know how to do for resolving this problem.

I'm using Windows 7 Professional 64 bits SP1. Norton (NIS, the most recent version), "ShellfolderFix" and also Tune-Up utilities are installed on my PC. I have also tried to install KB3001652 manually after having deactivated the firewall and the "Auto-Protect" functions of Norton : no success.

Thanks for your help (and sorry if the English translation of the French messages is aproximate)
XRay78 - Crespi?res - France

More replies
Relevance 61.09%

hi every time i go to the windows update site an error code appears
the code is 0x80240001D, what is this?
i also had a update that would not install
 

More replies