I have laptop while using it was showing horizontal lines and hang when again turned off and turned it was showing hp then immediately the laptop turned off but now when I press the power button power button shows light but display. shows nothing it is blank
More repliesI recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)
My laptop is HP 650 and the problem is capslock light blinking,wireless light is orange and the charging light is automatically ON without putting charger
More repliesI was on my Y560 Model 0646 checking my email and the computer shut off on me. I went to turn it back on and it does not turn on. The caps lock and number lock light up. Blue tooth, Battery, and Video status all light up above keyboard in status area. None of the fans are going, and it does not sound like anything is running. I tried removing the power and battery and pressing power button a few times. Also tried to remove power and battery and holding down power and nothing. It's almost like it freezes. I can push the mute button and it lights up, but then cannot turn it off. Please help. Laptop just went out of warranty last month.
I'm guessing it is because of the motherboard. Since it is out of warranty can a Y560 motherboard be purchased anywhere? Any ideas? Please help.
7 more repliesMy Toshiba satellite c650d seems to have power...the on button is green. The screen is black, the numbers and caps lock lights are on and wont go off. The disk drive makes the usual booting up noise but that is all she does. Ive unplugged and removed the battery and that did nothing. I cant even turn it off with the on/off button to remove that battery and then turn it on again. I removed and reinserted the memory (both) and I can't take the hard drive out, its held in by a screw. Is my "friend" dead?
If, as it sounds, it is booting up but not ever displaying anything on the screen, check the cable between the motherboard and the screen. It might just be one of the connectors (at either end) has worked loose. With the computer well booted up, move the screen gently down to nearly closed. If you ever see anything on the screen then it could be the cable is faulty where it hinges.Always pop back and let us know the outcome - thanks
2 more repliesI have G500 laptop running windows 8.1 64 bit. I have noticed that there is no indicator light for when num lock is on. The light on the front of the computer under the touchpad comes on when caps lock is active, but not for num lock. Is there any indicator for num lock on this computer?
Hi Kimikat730,
Welcome to Lenovo Community!
I?m sorry to inform you that there is no other indicator in G500 Laptop for Num-Lock key.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!
I want to use the "accessibility" option which causes a "beep" whenever I hit the Caps Lock key. I can sometimes get it to work for a few seconds, and then it stops working. Any ideas?
I have tried without success to turn on the 'beep'you should get when using Caps Lock (and Num and Scr Lock) using the correct procedure over and over again. (Accesibility menue, checking NumLock shortcut hotkey is on, etc etc.) The menue pops up when I press the Fn / NumLock Hotkey, but I cannot get any sound from the CapsLock key although sound is OK for everything else?Any ideas? O/S: WXP2
I haven't been here for awhile, I got a new computer and everything is OK there but I know there is away to make the caps lock beep when you hit it by accident, I just can't remember how to do it,
Can you help me? Also need to change just what kind of computer I have now.
Quote:
Originally Posted by Florence
I haven't been here for awhile, I got a new computer and everything is OK there but I know there is away to make the caps lock beep when you hit it by accident, I just can't remember how to do it,
Can you help me? Also need to change just what kind of computer I have now.
I put my computer I have now in here so that is fixed,
I recently read a post (can't remember by whom or what the title was) which explained how to get the PC to beep everytime the caps lock , scroll lock , or numbers lock keys were pressed , I configured my PC to do this and the sound is doing my head in so I wish to revert back to normal , problem is I can't remember how , can anyone help please ?
Control panel/accessibility options/keyboard tab and remove the tick from "Use Toggle keys"
5 more repliesI have forgotten how to make Caps Lock beep in Windows 7. It requires more than the Control Panel ease of access area. Actually I discovered it three years ago and this evening it just stopped working. I'm too bad a keyboarder not to require this beep. Any help will be appreciated.
Thank you,
GerryR
Sure, here's a tutorial to show you how,
Toggle Keys Tone - Turn On or Off
Even when I am typing this message it becomes difficult if my G 570 has the num lock on or off, same thing happens with caps lock. Have to guess all the time and correct the typos.. NONE OF THE LIGHTS - CAPS LOCK OR NUM LOCK IS WORKING. DURING BOOT UP AND JUST AFTER BOOT UP, THE LIGHTS SEEM TO WORK PERFECTLY, BUT AFTER STARTUP THE LIGHTS BECOME COMPLETELY DEAD! difficult working with guessing business and toggling these always basing on trial and error.. PLEASE HELP!
hi SD_musician,
Can you try to:
1. Check this registry fix to disable or enable the Num Lock key at startup
2. Referring to this article, try to press Fn+F8 to enable numlock at the Windows login screen then press the power button to shutdown / restart the PC.
3. Check for an updated BIOS from the lenovo website to fix both capslock and numlock issue (press Windows Key+Rt > type msinfo32 then press Enter to know your BIOS version).
Note:
Backup your important files and follow this readme instructions before updating the BIOS.
Let me know your findings.
Cheers.
I often hit caps lock by mistake, and then end up with loads of caps.I have tried going into Control panel >accessibility option >keyboard tab >select use toggle keysbut it still doesnt beep when I hit caps lock.Any ideas why not?
Has it ever beeped? It may be that you don't have an internal speaker in your PC.I've disabled the Caps Lock key using Microsoft Intellitype (even though I don't have a MS keyboard)click hereIt worked for me by selecting the MultiMedia Keyboard and then choosing the option to disable. It may not work for every one
10 more repliesIm not too sure if i'm on right forum? My caps lock symbol keeps appearing, even though on the keyboard its clearly not being used! have tried a different keyboard too ?
Have recently scanned and cleaned malware successfully, so im quite sure its not that
Are you using a wireless keyboard? If so then your batteries are prob weak and going dead. If not, then there maybe some issues with yuo drivers. You should try to update your drivers, and what version of windows are you using? and what brand keyboard?
Hi. I've just had 16 automatic updates installed mostly for Vista security and now the Caps Lock light will not come on when Caps Lock key is pressed. Hopeless!
Any ideas please?
Thanks,
Phil.
Do you know when this problem began? Try a System Restore to a point in time BEFORE the problem began. Here's the procedure: http://www.vistax64.com/tutorials/76905-system-restore-how.html. Be sure to check the box to show more than 5 days of restore points. If the first attempt fails, then try an earlier point or two. NOTE: You will have to re-install any software and updates you installed between now and the restore point (yes, I know, all 16 and perhaps others now as well), but you can use Windows Update for the updates. It will notice they are missing and re-install them.
The problem is that one of them may have caused the light problem. It may be best to write down the updates it wants to install (with the KB numbers) and do each individually and then reboot and make sure the light still works before moving on to the next until you find the one causing the problem. Then uninstall that one and just install all the rest but that one. Post back with KB number and name of that update and we'll look into the problem.
Or you can live without a CAPS LOCK light. As a partial workaround, Go to Start / Control Panel / Ease of Access Center / Make the keyboard easier to use and check the box for Toggle Keys. Now whenever you hit Caps Lock, Num Lock, or Scroll Lock, they system will make a sound. As you probably almost never use Scroll Lock or Num Lock, it will basically apply for Caps Lock. Thus though you may not see the light come on, you will at least hear a sound indicating ... Read more
Hi,
On my laptop I don't get the quick image on my screen when I turn my caps lock on/off like I do when I turn my mute on/off, brightness up/down or sound up/down. It's quite annoying as there is no light on my keyboard or anything to tell me so if I have to find out whether I've got caps lock on I have to type something into a text box where the text is visible (unlike a secret password box). It's quite annoying and I'd like to know if anyone can help me with putting something like this on the computer. I've never had it so I don't think anything has been deleted.
Thanks in advance.
Hi Nicko -
Can you please list the make and model of the laptop.
I have seen a light or wire related failure on some models
Thank You -
Hello, I am trying to turn off the Caps Lock OSD (Indicator) on my Lenovo Z50-75. I have already looked in display options but I am not seeing the 'On-Screen Display' tab. I have managed to stop it from coming up by ending the task 'LenovoUtility' on Task Manager but I would like to know if there are any better solutions since LenovoUtility may be used for other things that my PC may need. Thank you,- Troy
More replieshi everyone, I have a hp Pavilion dm4-3011Tx with beats which is about 7 months old. Yesterday I woke it up from sleep and the keyboard lit up and the caps lock light would blink twice every few seconds. I held the power button down and rebooted it and when it started up the fans were running and the light was still blinking. I tried a hard reset and everything and several hours later it started again randomly...A short while later it happened again and this time I was unable to fix the problem. I have already read that it a Bios corruption but I don't know what that means. Can anyone help? Thanks. I have already tried doing a hard reset, taking the battery and the plug out, pressing the windows key and b while turning it on. Any help would be appreciated. Thanks.
Your keyboard seems to be damaged. Get it replaced, you're still in warranty I guess.
____________________________| Please hit Kudos, if I help you! || || VA ||___________________________|
Hello.
The caps lock light on my HP Pavilion G6-2356sa is flashing. The button still puts the letters in capitals, so it still works, just continually flashing. It's just stopped flashing actually.
Anyway, I've had a Google and all the results I've found say it has a black screen at the same time. Mine doesn't have a black screen, though it did a few months ago, made a thread here.
I'm not sure this is a good sign.
Thanks in advance for help.
Usually a bad sign depending on the number of flashes you receive:
Computer Does Not Start and the LEDs Blink or the Computer Beeps HP Pavilion dv5000 Notebook PC series | HP? Support
The principle would be the same
Strangely enough, since updating to 9879, the caps lock light on my keyboard does not work.
I know it may seem small but it is really annoying not knowing when caps is on or not. My keyboard is backlit and the keys light up fine but the light on the capslock key does not.
I'm dualing booting with Windows 8.1 and if I switch back to 8.1, the caps lock button light works fine, so I know the light it self is not the problem.
Any suggestions?
Thanks in advance.
It's a known problem that there is supposed to be a fix released for soon.
No Caps Lock Lights? Microsoft Says a Fix Is on Its Way.
I've got a Yoga 11e running Windows 10 and like a lot of people I find the caps/num lock indicator popping up while typing sometimes quite annoying. However, because the keyboard doesn't have an inidicator that lights up when a user turns caps lock on or off I don't want to get rid of it entirely because it's useful. I just hate that it pops up right in the middle of the screen. Is there a way to move the indicator from the center of the screen to the far right or left? All of the threads I've seen only focus on turning it on or off.
More repliesHi, I have a Pavilion 15-ac628TX notebook that is 14 months old, since I bought it new.The light for the Caps Lock key has recently stopped lighting up.Which makes it a pain when typing in a letter in capital letters or lower case.
More repliesFollowing toshiba repairs to my brand new M70 pro laptop (system board was replaced) I have noticed that the caps light does not work when the caps is on. The bulb does work as it illuminates when the caps button is pressed but it does not stay on.
Although the caps facility does work I just don't know when the caps lock button is on or off. vERY COnfusING.
Any assistance greatly appreciated. I'm running MS windows XP pro.
Cheers Brendan
Hi
You have suggested that this light doesn?t works since motherboard replacement.
Am I right? In my opinion it's a mechanically issue. Cannot solve it yourself.
In this case I would recommend contacting the ASP again and explain him the situation. Usually the warranty should cover the reparation procedure.
Hi,
I'm having problems with my keyboard again. The Caps Lock key (dim) light remains on and the following keys are not working: 2 @ w s x and the one on the right next to Alt. In the meantime I'm using the on-screen keyboard. I had this problem a couple of years ago, I found a solution online but I forgot what the solution is, so i'm sure is not a keyboard itself.
Thanks
I think you should try re-seating the keyboard's cable to the motherboard.
You would have to remove the keyboard to do it
Can you recall if that's what you did last time ?
At boot I get a blank screen, no beeps and a caps lock light bling twice, pause, twice, pause... and so on.What hardware component is involved ?Thanks
Hello @Morelli-L, Can you match the sequence of 'blinks' to those shown in the table below. Hope this helps, for any further queries reply to the post and feel free to join us again !! **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee
1 more repliesThe caps lock light on my Compaq Preario V6000 stopped lighting up.Is this likely a hardware problem? How do I tell? If it's a hardware problem, how do I fix?Is this likely a software problem? How do I tell? If it's a software problem, how do I fix? THANKS FOR ANY [email protected]
"Is this likely a hardware problem? How do I tell? If it's a hardware problem, how do I fix?""Is this likely a software problem? How do I tell? If it's a software problem, how do I fix?"It's more than likely hardware related. Do you get CAPS when it's toggled (try it a couple times to be sure). If so, then likely the LED has simply expired. If not, then the key itself (or possibly cable) is probably defective. May or may not be an easy fix depending on your experience with the inside of a laptop."Channeling the spirit of jboy..."
4 more repliesi recently encountered a small problem with the onscreen display when trying to turning some functions on and off. i've noticed that when i tried to turn caps on, it does not display the "Caps On" on the lower right bottom of the screen. i just want to know if anyone have encountered this problem or could solve it. as an obseravation, i noticed that the display disappeared ever since i install word 2003. thank you.
Thinkpad X61: 7675-CTO, T7500 NV, 1GB RAM, 120 HDD, 1GB Turbo Memory, VIsta Business
Hi ! Same for me, but LED is ok for me.
Thinkpad X41: P M 778(1.6GHz), 1GB RAM, 60GB HD, Intel 900, Intel 802.11abg wireless, Bluetooth/Modem, 1Gb Ethernet, Secure chip, Fingerprint reader,X4 UltraBase + CDRW/DVD, WinXP Pro
Lenovo Y720 So, when I hit caps ock or num lock an on screen display tells me whether capslock or num ock has been pushed. While I appreciate it is helpful for some, in my case it become a hinderance. You need to remove "num lock" for single key print screen request, and if I have a short time frame, I am stuck without being able to screenshot until the num lock indicator goes away. How do I turn off the on screen display. Now, before you send me to the previously asked questions of similar nature, I have tried. There is no "display settings" in Control Panel. There is no "advanced display settings" on the settings panel. And there is no way to control it through NVIDIA or Intel graphics settings (that I can see). Thanks kindly.
More repliesANyone have aclue how to get these working again i did a clean install of windows and for the life of me can't get these to work I've installed all drivers from the drivers page with no luck
More repliesHallo, I own a HP pavilion dv6. Normale I use to set to hibernation when I finish working. However, today as I came back home and tried to switch on from hibernation, I remarked the caps lock blinking and hard disk orange light. Is there anything I can do by myself? If not, where could I take my notebook near Cadiz, Spain? Any chance I can keep data from the HD?Thank you,Roberto
More repliesMy daughters laptop will not start up. Not sure if it's a screen issue or something else. When you power it on you can hear it running and the power button lights up but nothing happens. There is a green light flashing on the caps lock but that is all we get.
More repliesMy caps lock light suddenly quit working. I have no display of caps lock. I am running Windows 7 on an X250 I7 with 8 gybtes of memory. I wonde if this is a hard ware problem or a software glitch. I have 136 days of warranty left. Thanks very muchMK Stenstrom
More repliesTried the ctrl alt arrow up, etc. - doesn't work. Could I have locked the keyboard somehow. Lenovo T-430 - Windows 8Help!
" Could I have locked the keyboard somehow"Do you have an F-Lock key on the keyboard?
2 more repliesI have just bought an ideapad Z500 and the led light on the caps lick button on the keyboard is always on.The key is workin and switches between capitals and lower case but light remains in at all times.Does anyone know how to fix this or is it a problem with the laptop?I know it is not effecting the use if the laptop but its really annoying!
hi Hmarshmellow
I'm really not sure what's causing that but can you try
- Draining Power by Removing AC and Battery then hold down the power for 10 sec.
the try reconnecting everything.
-Now when you power it on the right away start pressing FN+F2
It will load the BIOS set up utility
-Press f9 for loading defaults the f10 to save and exit.
Please let us know what happened
Hope this helps
cheer!!
Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!
This happened after I dropped the laptop on the sofa. It wont turn on. The caps lock is flashing all the time and f12 light is on. No sound or beeps at all when I switch it on. thank you
More repliesHi, I have HP Pro X2 410 G1 and when pushing the ON/OFF Button,it vibrates as it would be,and instead of turning on the display and displaying the HP logo and so on,it keeps the display black with no led (like it is when the tablet is turned off) and starts blinking white light on CAPS LOCK button,it blinks 1 time,after 3-4 second once more time,after 3-4 second once more time and continues doing so until I turn the tablet off. I turn it off by holding the ON/OFF button for several seconds,and it turns off as usually does when everything is ok (a light is blinking 1 time on the lower middle of the screen ribs and the power goes off) .So I think it actually turns on,but the screen is not showing anything and the system realizes that something is wrong and gives me alert with that blinking on CAPS LOCK button ... I have removed the touchscreen and using the tablet with its HP Pavillion x2 dock station as a notebook.The screen is moving, because the touchscreen must have been fastened to it, but I have removed the touchscreen and only the screen is left.there are times that it turns on normally,but for about 70-80% situations it gives the problem above PLEASE HELP ME TO SOLVE THE PROBLEM
More repliesLaptop Won't Boot. Caps Lock Button Light Blinking
JetGada1 Hello;Allow me to welcome you to the HP forums!I read your post about your notebook not starting but with the Caps Lock LED blinking and wanted to help.Here are some troubleshooting steps you can try: HP Notebook PCs - Computer Does Not Start and Emits an LED or Beep Code | HP® Customer SupportGood LuckI am a volunteer and I do not work for, nor do I represent, HP.========================================================================If you feel my suggestions helped you, please click the Thumbs-Up symbol on my post to say thanks!If they helped resolve your issue, please click "Accept As Solution" to help others find similar information.
1 more repliesBlack screen, caps lock light is blinking once blink every five seconds. Was just using it not ten minutes ago. Please help. I've tried removing the batterie with no success
More repliesMy fiancée's HP G62 laptop suddenly stopped booting. More specifically, when you press the power button, the power light comes on, but the screen stays totally black. I tried doing a hard reset on it (unplug, remove the battery, and hold power button down for 60 seconds), but that didn't work. I tried this multiple times with no success. I shined a flashlight on the screen to see if there was a faint image (indicating a backlight problem), but there is no image at all. I tried connecting the computer to an external monitor, and that didn't work either. Recently I had to replace the fan and the power button assembly on this machine, but it was working fine after that until now.
More repliesI just bought a HP Pavilion DM4-2015dx laptop a few days ago. Turning it on this morning, it won't boot and the Caps Lock light is blinking. I have searched the HP site and Google for a solution to the problem and have found nothing to tell me what the blinking light means or why it won't boot up. Does anyone have an idea of what the blinking light on the Caps Button means?
I have the Pavilion dv7 124Ous and this is the second time this has happened to me. The first time I replaced the battery and that seemed to work fine. But now it's not working on line I found this out about the blinking lights, There is a list of 7 things it could be.... Cpu Failure, Bios Failure, General Board System Failure..
9 more repliesHp pavilion dv7-6c64nr entertainment PCCore i7Windows7After i switch on its has black screen, caps lock blinking 3 times, function key f12 wifi signal on. But the machine always running (I can hear the sound).Appreciated if anyone could help. Thanks in Advance
Solved!
View Solution.
Hi, First, with reference to the Service Manual on the link below - remove and re-seat your memory module(s). If the above makes no difference try the following. Again, with reference to the Manual on the link below, remove one of your memory modules and then see if the notebook will boot. If it doesn't, try the same module, but in the other slot. If is still doesn't boot, try the other memory module in both slots, to see if any combination will allow the notebook to start normally. The procedure for removing these modules is detailed starting on Page 63 of your Maintenance & Service Guide. Regards, DP-K
7 more repliesHP Elitebook power button and caps lock continue to flash white light. I've tried all the solutions listed in the forum and none of them worked.
More replies* Sorry for my Englishhi everyonei bought a laptop since 2 weeks and it came without Windows "no dos"so i installed windows 10 and i let it do the update and after finish the updates it restarted and when it restarted i had a black screen and i tried to power it off and turn it on again and the same "black screen with caps and num lock light (led light not blinking or flashing) "so i tried many solution and i didn't get any resultesthe solution was :- i earse the hdd from another pc and put it again- i tried to press the power button for 1 min- i pulled the cmos for 30 minutes and put it again- i found the ram embedded in motherboard so i can't remove it- i took the hair dryer and i tried to run the fan cpu and turn on the pc- i removed the keyboared and turn on the pc- i removed the battery and turn it on with AC adapter- i tried another display with hdmi cable- i tried with Novo button- i drained the battery until the led of the battery can't blinck anymore- i removed the DVD- i try to boot with bootable DVD " windows 10 ; 8.1 ; 7 ; xp "- i try to boot with USB flash but it didn't even blinck- i removed the cpu fan- i tried (Fn/Win) + R and (Fn/Win) + B and Fn with all the F and also (Fn/**bleep**) + ESC- i removed the Wireless Card*the PC model is: Lenovo V310-80SY*this is video for what happen when i turn it onPlease i need help because i just bought it recently ... https://www.youtube.com/watch?v=Qu1ipEHfDrU
More repliesThinkpad T61 caps lock not glowing, but its functioning well. Only light doesnt glow. Any suggestions. Is it a drivers issue or any settings in BIOS. Please suggest. Thanks,
Most likely the CapsLock LED is defective. If so this won't be an easy or inexpensive repair.
Probably the most expedient solution would be to install an on-screen CapsLock indicator utility, e.g. Hotkey Features Integration for ThinkPad or CapsLock v4.2.0 ("A utility program that gives an on-screen display and optional audible indication of the keyboard CapsLock key state.")
Hello, I'm currently shopping for a notebook. I stopped by a local retailer to check out the IdeaPad Z580, but there is no indication if the CAPS LOCK is on or off. There is no keyboard LED light (which I would prefer), and there was no onscreen display. I then stopped by another retail outlet, and checked out the Lenovo there also, again no indication if the CAPS LOCK is on or off. I noticed in the download/driver section there is a driver for CAPS LOCK / NUM LOCK on-screen-displayhttp://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028421 Not sure why the in-store Z580 displays didn't work; maybe because they where running Windows 8? My Samsung laptop (stolen) had an on-screen caps lock display, but the icon was very cartoonish and should I say... stupid looking. What does Lenovo's CAPS LOCK and NUM LOCK indicator look like?
Lenovo Solution Center for Windows 8 How nice that the Essiantials Lenovo G580 gets this suit, but the IdeaPad Z580 doesn't. I guess Lenovo just slapped installed Windows 8 into the IdeaPad, and shipped them off to consumers/retailers? Man, I really wanted to purchase this notebook Guess I will just keep looking
2 more repliesThe Caps Lock Display is not working on my Think Pad E 531. Any ideas to fix this problem would be appreciated.
More repliesThe Caps Lock Display is not working on my Think Pad E 531. Any ideas to fix this problem would be appreciated.
More repliesHello, I am quite bugged by the Caps Lock onscreen display, since I cannot find a way to only turn off the capslock display without turning off all displays.This display drops my FPS from about 70 to 40 when I'm playing video games which is bugging me a lot.But I would like to keep my other displays like soundlevel and screen brightness.And yes, I know that it is possible to keep the capslock display for only 3 seconds when turning it on too, but I want it to be not displayed at all. I have a green light on my keyboard which is good for me.So is it possible to completely turn off the capslock display without turning off the other displays? Henkert.
Solved!
Go to Solution.
Right click on desktop --> Screen Resolution --> Advanced Settings --> uncheck "Enable on-screen display".
8 more repliesI have an x61t that when it locks for screen saver password and you have to CTRL ALT Delete the relog back on. the CAPS lock on the onscreen keyboard indicates on but it's not. 1. Log into the tablet.2. The screensaver would lock the tablet.3. Press Ctrl Alt Delete to get to the logon screen.4. The on screen keyboard would show the Caps Lock key as on but it wasn't. If they pressed the Caps Lock key it would then be on.5. The users don't press the Caps Lock key now, even though it is being displayed as on, and they can logon OK. I cannot recreate this problem on another X61tablet and this behaviour happens even when the notebook is in a docking station with an external keyboard. anybody seen this error before?
More repliesIn one of my pc's whenever i hit the cap or num locks keys it displays it doing so on my monitor.
Now normally i wouldn't care much for this but not all my keyboards for my computers have those green lights that light up when i enable the caps or num lock keys.
I am guessing its something that came installed with my computer when i bought it from newegg, any idea of a similar software that i can install in my other computers.
I like it displaying on my monitor when i turn on my caps or num locks keys
It would help folks here to know more about the computer in question. Brand and model if it is a commercial PC (Dell, HP, etc.) and operating system, or if a home built computer the motherboard make and model, and the operating system used.
If running Windows 7, type Keyboard into the Run box, and select Keyboard from the list that appears. See if there is a Key settings option. If so, select it, and find the Key Settings List. I can't recall where exactly, but somewhere in the list you will find "Display Caps Lock status on screen" . . . make sure it is unchecked. Not sure if this will fix your issue/s or not.
What kind of keyboard are you using? The display issue might be a function of your keyboard, and you might have to adjust the behavior in any software that came with it.
Is there a way to display the caps lock status on screen?
More repliesMy Hp pavilion dv4- 2049us and my laptop screens stays black and not booting up. I have removed the keyboard connector due to defective found.It was working with USB keyboard two or three times just after recovery. Before recovery the laptop inbuild keyboard was connected. At recovery time after 1 time restart it was not going to the next step of installation. Giving beep sound. That time I have removed the inbuild keyboard. and useing usb keyboard. Completed the recovery installation with usb keyboard. After recovery onetime the problem found but after trying 2 to 5 times on and off it was working. Now after 2 or 3 time restart laptop is not boot up atall. but the caps lock blinking continiusly and volume, and the wifi light they all turn on and so do the fans. Capslock light blink every second. I need to know is it the signal of the removied inbuild keyboard? please help.
Hi @rajesh7887,I hope you enjoy your visit to the HP Support Forums. I understand you are having an issue with the computer not booting and the cap lock light blinking. I will be glad to help you. Please follow the step from these documents.Computer Does not Start (Windows 7, Vista, XP)Computer Does Not Start and Emits an LED or Beep Code Please keep me informed of how things went. If you require further assistance, let me know and I will gladly do all I can to help you.Please let me know if this resolves the issue by marking this post as "Accept as Solution".To simply say thanks, click the Thumbs up below! Thanks.
1 more repliesHi, I have a lenovo G560 laptop and a thinkpad t400 laptop. In thinkpad laptop, whenever i press caps lock there is a notification display that caps lock is on and similar notification at the right bottom corner of the screen appears that caps is off. Similarly for num lock. How do i get the same notification things in lenovo G560 laptop in windows 7. with regards,ashwin_cse
Please reinstall or install the lenovo energy management software. Also see if utility.exe is running under processes tab on the task manager.
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.
The on screen display CAPS LOCK icon (C:\Program Files\CapsLK OSD\capsosd. version 1.0.1.0)How do I stop the icon display permanently whilst caps lock is on? I have solved the problem on my Thinkpad (desktop right click/resolution/advanced/on screen display), but not on the S205 ideapad
Solved!
Go to Solution.
Hello imp1971 and welcome to community,
Kindly uninstall CapsLock App software from program and features.
If you want it back then you can download from here
Best Regards,
Tanuj
I am not able to provide any solutions or assistance at this time. Please allow for the forum community to assist with your matters.
Thank you
ANyone have aclue how to get these working again
i did a clean install of windows and for the life of me can't get these to work
I've installed all drivers from the drivers page with no luck
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.
I LIKE THE LITTLE CAPS LOCK ON NOTIFIER BUT IT QUIT POPPING UP. I HAD IT WHEN I FIRST GOT MY DELL INSPIRON 7020. HOW DO I TURN IT BACK ON??JK
CAPS in a forum means you are shouting. I would suggest you turn off the caps lock and I'm sure you will get some replies:http://www.computing.net/howtos/sho...The above link should help you...good luckSome HELP in posting on Computing.net plus free progs and instructions Cheers
4 more repliesHello, I just got a lenovo carbon x1 and when the computer comes out of hibernation or sleep a symbol that says the caps lock is off appears on the screen for a few seconds. How do I stop it from telling me the caps lock is off after waking it up from sleep or hibernation? thanks
Hi Michaelalex17,
Welcome to Lenovo Community!
It is a default setting which shows the ?Caps OFF? for a few seconds, because there is an option to show always or show for a few seconds, we cannot disable the individual on-screen popup display.
If you are looking for the setting. You can go to graphic properties to change, right click on the desktop and go to screen resolution ? Advance settings ? click on On-screen display tab and make the changes for your convenient.
Hope this helps!!!
Do post us back if the issue still persists.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!
I got a bunch of new computer parts to create my own computer....Here are the specs.
Motherboard: Gigabyte P55-UD3L
CPU:Intel Core i5
VGA: GeForce GTS 250 1GB GDDR3
Hard drive: 500Gb Barracuda
RAM:2x4GB Xms3 (Corsair)
Power Supply: Coolmax 700W CU Modular Power Supply
As the question states when I have everything plugged in i`ll power on and all the fans will turn on the hard drive will turn on and the 4 phase LED`s on the Mobo will also turn on(What do these mean?),but the computer screen will still remain blank and there are no beeps when starting the computer....I`ve tried resetting the CMOS, and also bench installing everything but still no luck everything is brand new and i`m wondering if this is either a PSU problem and i have to buy a new one or if I messed up the Motherboard and need to purchase a new one.....Please someone tell me if there is anything else I did not try yet or tell me what I should do to go about fixing this problem.
I have tried putting only one RAM stick in and still nothing happens.... The thing is that the motherboard won`t beep even if there is NO RAM in there I don`t know what else to do.
How do I find out whether it is the Power Supply messing up or if its the motherboard? Or is it possible that the power supply is not enough to support this equipment?
Please Help Me!!
I have a couple of problems at the moment...
Firstly, some time ago, the volume level display (a green indicator which came onto the screen) disappeared. I have been told that his was due to an update which needed to be done, but which for some reason got rid of the display. Short of taking off all the updates, is there any way of getting this back?
Secondly, the display lights for the caps lock and number lock have stopped coming on. The display light to show the hard disk is being written to is still working, but the other two beside it (caps lock and number lock) just stopped working. Is there some cause for this such as an update, or is it just that the bulbs have gone?????
All answers welcome!
Hi
Regarding the volume control notification on the display;
This volume level notification is controlled by software. Possibly the Microsoft updates influence this notification and therefore it doesn?t appear on the display. I presume some registry keys were changed? but I don?t know exactly what entries could be affected.
Regarding the second issue; keyboard lights;
Well, usually this has nothing to do with the installed software.
I think it could be a keyboard fault? but this is only my personal suggestion?
I don?t know how long the OS is running on your notebook but maybe it would be advisable to refresh the OS to ensure that new installation could helps to get rid of these issues.
I just updated all of my system programs with the lenovo update utility, including the BIOS. Since the update I don't have the ability to see my caps lock, volume control, or the led light indictor on the screen. I need the driver for the HotKeys, the only one I found was for a versioin 6, and it's telling me that version 7 is installed, but it's not working? Any help?
Solved!
Go to Solution.
Fixed, I installed the previous version and Lenovo Update Utility found the correct version and installed.SOLVED Sorry for the meaningless post.
1 more repliesHi, I was wondering if anyone knows if it's possible to view the On Screen Display notifications such as whether CAPS LOCK is on or off on an external monitor? The external monitor is not a clone, it's an extended screen. I'd like the Caps Lock on or off notification on the external screen. I spend my time looking at the large external screen and continually having to guess if the Caps Lock is on or off!? Any help is greatly appreciated, thanks.
More repliesB & N key turns on caps lock. caps lock does not work when pressed. touchscreen keyboard works properly.
More repliesUnable to release "Caps Lock" in Windows, Only With "Shift" key, HELP please.?
I recently had a power serge that frying 1 of my 6 internal 2TB sata hard-drives... After removing it and running some test to see if everything was ok other then that drive... I noticed my Caps Lock key was freezing on... I tried swapping it with another USB keyboard still the same problems then I tried swapping it with a PS/2 keyboard still the same issues... I can release the caps by pressing ether SHIFT key...
I'm Currently running,
Windows Vista Ultimate 64bit (Valid)
8gb Ram,
12TB of Disk space,
(Post a comment if more info is needed, But I think this is more then enough info to help answer the question)
I would really like to not have to press SHIFT every time to release the Caps Lock key.
Thank you if anyone can help this issue.
p.s. I've tried reinstalling the drivers & uninstalling from Device manager....
With no changes to my h8-1534 desktop runing Win 8 it suddenly won't boot. I press the power button, all case fans start, power button lights up, front case light is on. I can open the cd tray but it immediately closes. Nothing appears on the monitor (tested good and cable). No beeps from case speaker.
More repliesHi please help!!!! My work laptop doesn't have the option to turn on or off the on screen indicator for caps lock, num lock etc. I googled it, I looked it up on help and contacted my IT department. The options are - Control Panel, Display, Advanced settings, then click on "on screen display" THERE IS NO ON SCREEN DISPLAY FEATURE on my laptop!!! IS it just mine?!?!?!?!
More repliesI just got a t3500 from work last week and got some ram sticks and a hdd for it, and its all fully put together now, but when i power it up i get these beep codes and status light
1 long beep
3 normal beepswaits 1 sec2 normal beepsdiagnostic light1 = solid green2 = off3 = off4 = off
It leads to no display at all, i am using a displayport to hdmi cable, and tried both ports.specs:dell precision t3500cpu: xeon 5600 seriesram: KINGSTON 8GB 2x4GB DDR3 PC3 10600R 1333MHz 240pin ECCgpu: ATI FireMV V2260hdd: wd 1tb psu: as it comesany ideas why no display???the beep code is:1-3-2 =1st 64 K RAM test in progress or failure
diagnostic light:
1- Solid 2- Off 3- Off 4- Off
MEM
Memory
Memory subsystem configuration activity is in progress. No memory modules were detected.
possible ram incompatibility or dimm slots playing up??
IThe ram i am using is ECC Registered
is this the problem?? As there is:
ECC unbuffered
ECC registered
non-ECC unbuffered
and apparently other people had same issues when they used 'registered' ECC ram
Hello! Since the most recent build of W-10 (9879), my caps lock, num lock, and scroll lock lights do not function on either computer on which I have W-10 installed (a desktop with a USB keyboard and a laptop with an integrated keyboard). The keys still work to correctly toggle the functionality, but the keyboard lights don't work. In case it matters, my keyboard's actual backlights and my mouse's internal light (not the laser, the internal LED) are working correctly, it's just the CL, NL, and SL indicators that don't function.
Anyone have any ideas for fixing this?
Welcome to Windows TenForums, Vaindil.
It doesn’t seem to work on anyone’s system and there doesn’t seem to be a fix yet. You can read here into the beginning of the next page if you like.
https://www.tenforums.com/general-dis...tml#post167249
Yes, I still have an Inspiron 530 after all these years. Was working fine in daily use, no recent hardware (or software) changes. Upon shutdown a few days ago the display briefly showed a checkerboard before turning off, and since then it won't boot.
I turn it on, button goes amber then to solid blue immediately, fans are all spinning, yellow LED shines on motherboard and green LED on PSU lit, HDD makes a few disk-like clicks, but there is no single beep that it always used to make when turning on, and screen stays black then shows "No signal". I've tried switching from ATI Radeon HD 3650 via DVI to built-in VGA port and still nothing,
Screen is good (tried with different computer), power sockets and leads good (switched), I've changed the motherboard CR2032 battery for a fresh one, removed unused cards (modem card, TV tuner card), removed and replaced graphics card, waggled memory cards. No change in any case.
Spec is slightly upgraded from 2009 original, but hasn't changed in months.
Original spec
Core 2 Quad Q8200 (2.33 GHz, 4MB, 1333 MHz FSB)
3 GB (2 x 1024, 2 x 512), 500GB SATA 7200 RPM, media card reader, Vista, DVD+/-RW + DVD drives, IEEE 1394 card, Analogue/Digital TV tuner PCIex1
Upgrades (over a year ago)
Now 6GB RAM, 120GB SSD with Windows 7, and previous 500GB HDD moved to be D: drive.
Upgrades a month ago
Windows 10
Any advice on what to test/check would be greatly appreciated - thanks!
RB126
Those are excellent troubleshooting procedures you performed.
As there are no 'beeps', there could be a motherboard issue/failure.
Did you remove and replace the memory modules, to see if this made a difference?
No difference, try the following, if you are comfortable working around computers:
Note: The only 100% method of testing a PSU, is to install a known working power supply.Unplug the cord from the power supply, hold the power button in for about 15/20 seconds, open the case, unplug the 24-pin power connector from the motherboard and jump the Green wire to one of the Black wires, reconnect the power cord and power the system, if power supply, case fans and the hard drive run, then the PSU should be good.Note: Do not remove any wires from the plug, use a small piece of wire or a paper clip as a jumper.
Power supply checks out, again disconnect the power cord, hold the power button in again for 15/20 seconds to discharge the residue power, reconnect the 24-pin connector to the motherboard.Remove all PCI cards from the system, take out the video card [if applicable], disconnect all peripherals, except the monitor, mouse and keyboard and disconnect the power & data cables from all drives. Reconnect the power cord and power system on, see if you get a different LED indication on the power button, or 'Beeps'.No difference, remove the memory from the system and try again. Still shows no signs of life then you are looking at a motherboard replacement &... Read more
Hi,
how to disable Caps lock, num lock, scroll lock screen messages?
I have desktop pc with two keyboards usb and bluetooth. Also TOSHIBA Bluetooth Stack software, but in device manager: keyboard > hid keyboard device both using microsoft drivers. And I dont have any software installed for keyboards. Also bluetooth has separate system tray indications (it is also disabled) so its not that. I made some googling and found other fix it with Hkey_Local_Machine\Software\Widcomm\BTConfig\General KeyIndication set to 0, but I dont have it in registry. Acualy I dont have anywhere in registry KeyIndication. So any ideas how to disable it? Thanks
Hi,
You'll find that the messages are controlled by a piece of software that came pre-installed on your machine when you bought it. Try looking for a Hotkey managing app to see if the notifications can be disabled.
OS
I'm using an HP Pavilion dv6000 Notebook series. I noticed that my Caps Lock LED is not working but its FUNCTION is working fine.. same goes with Scroll Lock. Here's the weird part.. when I press Num Lock ( function key + scroll lock ) the LED turns on! I already tried a system recovery, it didn't solve the issue. Is there something wrong with my BIOS? Any help from you guys will be highly appreciated.. thanks!
Sometimes electrical components needs to have all power sources removed and reintroduced to work properly. Try performing a hard reset first, if it doesn't work then try updating your BIOS. If neither works...It's pretty much dead and not worth fixing. To Perform A Hard Reset Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for 5 seconds)Disconnect the AC Adapter from the notebook.Remove the battery from the bottom of the notebook. There will be a switch/button to eject the battery.Wait at least 1 minute with all power sources disconnected.Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.
9 more repliesFor some time now, i have been experiencing that my Num Lock, Caps Lock and Scroll Lock all lights up (not blinking) all at the same time, I tried to google it but i can not find any solutions or explanations for it.
Does anyone know if it is bad? and what is causing this?
I am having a wired keyboard with nothing fancy just a standard issue Logitech keyboard.
Can you toggle those functions off, one at a time? Sometimes restarting the computer will use the last state it was in, I'd fully shut down and pull the power cord from the computer and the keyboard cable then put them back and try again.
2 more repliesI'm a sloppy typist. I don't know if I hit some key combo or what but I was typing a letter in word pad and suddenly my typing is in all caps. I have used a reg file to disable my caps lock key on this laptop because it gets in my way - a long time ago. I know it cannot be the caps lock key. I do not have a shift key sticking.
I saved the letter, then copied it to Polyedit another word processor, and it still types in all caps. Firefox does not seem to be effected. I even tried rebooting and nothing helped.
Clues?
Perhaps this solution?
Can't get rid of caps - Microsoft Answers
Hello all- I updated the BIOS to 2.26 a while ago and ever since then there's no on-screen indication of caps lock on/off, screen brightness or volume when I change it. Since it seemed to be affected by BIOS, I updated again to 2.27 just now, but the problem persists. Any ideas? Thanks in advance for the help. EDIT: Just fixed my own problem. I needed to update the Hotkeys Feature Integration by downloading the utility thingy from this page. Probably wasn't a BIOS thing after all.
Solved!
Go to Solution.
Hi Brightnsalty,
Welcome to Lenovo Community!
As per your query we understood that you were facing issue with On Screen Display earlier on ThinkPad T440s.
And we glad to hear that the issue has been resolved after installing Hot key feature application.
I also suggest you to update Lenovo power management application, if the OS is Windows 7, please update Lenovo Power Manager application.
Cheers!
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!
I'm using Ideapad Y570 and I've found that My Caps lock,Num lock & Hard disk drive indicator didn't work, while other indicators work properly. Does anyone have some solution for this problem?
P.S. My O.S. is Windows 7 64 bit
Thankyou
posts merged
Solved!
Go to Solution.
Anybody knows? Please Help
9 more repliesI went into Ease of access center, Make the keyboard easier to use, and turned on toggle keys to make sounds when I hit these keys - Caps lock, Num Lock and Scroll Lock - but I get no sound when I hit any of these keys. What is the problem?
is the system volume up
Check Toggle Keys and hit apply
I have a Ideapad Y560P that shut down suddenly and when we tried to turn it back on, the Caps Lock and Num Lock (on F8 key) lights go on but the computer does not start. I saw a similar thread from 2010 but there was no resolution. I assume that the two lights on at the same time at attempted start indicate some kind of "fault" condition in the computer. I have not been able to get the bios to start so that I could run diagnostics. I pulled the battery and held down power for 30 seconds, pressed start twice, put the battery back in but still won't start. I pulled memory out, trying to get a POST "beep" error but that didn't occur. I put memory back in one dimm at a time. I pulled the Hard Drive out and put it in an external enclosure and was able to extract the information to another laptop so I'm pretty sure I didn't have a hardware Hard Drive failure. Other than the one reference in this forum I haven't seen any information about this kind of, what I assume is a, hardware failure. I assume that Lenovo has some kind of guide that tells them what the lights mean. The computer was about six months out of warrenty when it failed. I called Lenovo to attempt to extend the warranty but they won't once it is out of warranty. Looking for some idea of what failed, whether it is worth getting one of Lenovo's listed companies that repair laptops to look at it and fix the problem.
Solved!
Go to Solution.
MiKershaw wrote:I have a Ideapad Y560P that shut down suddenly and when we tried to turn it back on, the Caps Lock and Num Lock (on F8 key) lights go on but the computer does not start. I saw a similar thread from 2010 but there was no resolution. I assume that the two lights on at the same time at attempted start indicate some kind of "fault" condition in the computer. I have not been able to get the bios to start so that I could run diagnostics. I pulled the battery and held down power for 30 seconds, pressed start twice, put the battery back in but still won't start. I pulled memory out, trying to get a POST "beep" error but that didn't occur. I put memory back in one dimm at a time. I pulled the Hard Drive out and put it in an external enclosure and was able to extract the information to another laptop so I'm pretty sure I didn't have a hardware Hard Drive failure. Other than the one reference in this forum I haven't seen any information about this kind of, what I assume is a, hardware failure. I assume that Lenovo has some kind of guide that tells them what the lights mean. The computer was about six months out of warrenty when it failed. I called Lenovo to attempt to extend the warranty but they won't once it is out of warranty. Looking for some idea of what failed, whether it is worth getting one of Lenovo's listed companies that repair laptops to look at it and fix the problem.HiIn my experirience, these two lights don't mean anything specifically.The only good and co... Read more
3 more repliesLooking for a Free Num Lock and Caps Lock indicator software? Download 7Caps.
7Caps is a very small application that aims to notify you in real time whether the status of the Num Lock or Caps Lock keys changes
Download it from its home page. TrayStatus also lets you enable status indicator for Keyboard keys.
Not a techie. Can't get straight answer ANYWHERE. New laptops tend to NOT have indicators on the keys. Hoping Windows 10 has indicators that can be turned on and PROBABLY would show up in the tray at the bottom right of the screen.
I have heard of sites where such things can be downloaded but again NOT a techie, so I hesitate to go outside of Windows/Microsoft for downloads. I do not know what download sites are safe or spoofs.
Please plain English ... i.e. go to settings etc. Or just give me a Microsoft approved site for download.
Dez/MJD
My recent purchase of the above All-in-One PC (running on Windows 10) included the Lenovo SK-8861 keyboard which has no lights for the CAPS LOCK and NUM LOCK keys. How do I get them to be displayed on the screen when pressed? When I went into Display Settings in Control Panel, I could not find the option to set them on or off. so, based on the instructions on https://support.lenovo.com/gb/en/solutions/ht002122, I installed the Hotkey driver from http://support.lenovo.com/gb/en/downloads/ds031814. When I now go into Advanced Settings under Display Settings and click on Screen Configurations, I can see the Enable on-screen display checkbox and the Appearance settiings but the expected Indicator Settings for NUM LOCK and CAPS LOCK aren't being displayed as expected. Can anybody advise what I need to do to enable these settings? Lenovo On-Screen-Display is listed under the Installed Programs in Control Panel. Many thanks.
I do not have an answer for how to enable them via the control plane, but I can point you to a free tool called Keyboard LEDs that I have used in the past that when installed will put an indicator in the system tray, and will sound a tone and display on screen if so configured in its settings.. Cheers,
1 more repliesMy friends dv7-1135nr is not posting. The num lock and caps lock led light will flash once every 2 seconds at the same time. According to HP this issue is a " not functional" cpu. I am ordering another cpu for 16.00 off ebay because this is cheaper opposed to ordering another board. Anyone else have this issue? And if so did you fix it ?
I have a Satellite C660 which was working fine this morning. When I returned from work and powered it on, the entire keyboard is not working and therefore cannot enter my login details.
The Num lock and Caps lock are lit.
Any ideas on how to resolve this?
Hi
Are you able to disable the CapsLock and NumLock?
Can you access the BIOS pressing F2 while powering up the unit?
If this does not work, I would recommend checking an external USB keyboard.
If the USB keyboard would functions, then this means that the internal keyboard is faulty and needs to be replaced.
Well, I have no idea what caused this but the tablet buttons (even the on/off button) the lights for caps lock and scroll lock as well as the automatic screen orientation change when I flip it to be a tablet have stopped working.Also the screen does not turn off anymore when the lid is closed. Reinstalled pretty much all of the drivers, no effect.Any ideas? Is this thing already broken?
well, SOMETHING is broken.. though it would seen unlikely it is hardware.. a question: did you load anything new just before this happened..?anything at all..scanner drivers or printer drivers or a new application..? OH!, welcome to the lenovo community..!
Bill Morrow, kept by parrotsSysop - forum.thinkpads.comX300, T60p, X60s,X60T (sxga+), Transnote, MacBook Pro, iPhone, iPod----She was not what you would call refined.She was not what you would call unrefined.She was the type of person who kept a parrot.Mark Twain
Caps lock and scroll lock blinking, will not boot up
Hi, Can you match the sequence of 'blinks' to those shown in the table below. Can you post back with the full Model No. and Product No. of your notebook - see Here for a guide on locating this information. Regards, DP-K
7 more repliesHello My notebook is not booting, the only sign I get is the Scrool Lock and Caps Lock lights blinking repeatedly three times. Important to mention that this laptop has a history of overheating and problems with its battery (battery was not charging anymore). Thank you very much.
Hello @FerrariLuis, Match the sequence of 'blinks' to those shown in the table below. Try to reseat the Memory Hope this helps, for any further queries reply to the post and feel free to join us again !! **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee
7 more repliesHi. I recently bought a new R5-417T laptop, and in the process of personalisation found no intuitive way to disable the caps-lock or num-lock notifications. (Windows 10 btw) ^Notification in question^ How would I go about disabling this? I've tried looking in the BIOS, in regedit and some mythical "Launch Manager" program bundled with older acer laptops that I can't find a working version for.
Caps lock is thr Caps lock key.For Num lock try Fn and F11.
6 more repliesMy hp touchsmart tx2 when I power on the display stays black but num lock and caps lock lights flash ?
More repliesHow do I remove the Caps and Num Lock indictor for a Lenovo G50, that is running Windows 10?
Hi Thisismyname01 ,
Welcome to the Community Forums.
On a similar G50 , this was resolved by uninstalling Energy Management .
Another steps that was advised :
1. Opening Control Panel >Program and Features>Uninstall a Program and look for Caps OSD or Lenovo OSD
2. On the display properties of the graphic card , you may also configure to "Show indicator for a few seconds" .
3. Disable hotkeys from the BIOS ( but this may change all other usable hotkeys ) . Lets's reserve it a last option.
Update us what works for you.
Regards,
