Computer Support Forum

computer is not booting after installation of new ram

Question: computer is not booting after installation of new ram

I have windows 7 ultimate 32 bit,
MSI M-7309 Mother board,
i have installed new 2 gb ddr2 667 mhz Hynix RAM,
and old one is 1 gb ddr2 667 mhz Hynix Ram.
when i install 1 by 1 ram then its working but installing both are not working.
help me...

Relevance 100%
Preferred Solution: computer is not booting after installation of new ram

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: computer is not booting after installation of new ram

9 more replies
Relevance 44.28%

Hi every one,
I have a problem with windows xp installation:
I need help with installing xp. I'm trying to install xp from a cd but it just keep re-booting from the cd instead of going to the hdd after the installation. The system dosesn't bring up the option to choose where to boot from. I have tried all the bios configurations. The installation completes properly but when it restarts the computer, it re-boots automatically again from the cd without me pressing any key. Please help.

regards, Sybella
 

Answer:XP Installation/booting help

11 more replies
Relevance 44.28%

HiHave just installed a new Mother board in my Computer the old board board was damaged due to a power supply failure.Ny problem is the original installation disc windows 2000 has been lost I am not sure of what version it was,in an attempt to format the HD Iam trying to boot from a windows 2000 pro version and just get the blue error message I have checked the bios and all is ok.IS it because I am not using the original disc that I am having problems.regardsJohn

Answer:Booting from installation CD

Is the 2000 pro CD an original or just a copy?

2 more replies
Relevance 43.87%

I have one problem with installing a copy of Win7 on my laptop. At this moment I have a Vista OS on laptop and I wanted to install a fresh copy of Win7 on it. In BIOS I've placed a DVD rom for Boot Primary device, and I placed DVD with Win7 system into DVD ram and rebooted comp.
When Press any key to boot form CD... appears, and when I press any key nothing happens - just a sound when I press a key each time, and after few seconds Vista is normally booting.

Please help

Answer:Booting from installation WiN7 CD

Welcome!

Try manually booting from the disc. Press F11 and F12 during the BIOS scan (called the POST) and select your DVD drive.



   Note
This function may be disabled in your BIOS by default. If it is, you will need to enable it.

3 more replies
Relevance 43.87%

I have an old install of XP left on an additional harddrive after I got a bigger drive and reinstalled... but now all of a sudden that's the only one it'll boot to! I had some other issues (caused, believe it or not by AVG).. and in the process of that I ran a repair installation over my new and proper XP.. with all the other drives disconnected.. and it was working fine, but as soon as I hook up the other drives... BLAM it's booting into the old install again. Now in disk management it's listed as the Boot Drive and the one that SHOULD be System is listed as active... i read something about making it active to make it boot from that drive... but it's not working.. what is the easiest way to modify where it boots from? I have been trying through the recovery console with fixmbr but that didn't work... i feel like there should be something more straightforward though!

note: the drive with windows that i want to boot off of IS listed first in the hdisk boot priority in the bios...
 

Answer:wrong installation of XP is booting

This may help:
http://support.microsoft.com/kb/289022
Be sure your "Proper" boot drive is the one listed first in The BIOS boot order. The nomenclature can be confusing. For that matter, just switch the boot order and see what happens.
 

3 more replies
Relevance 43.87%

So I have a laptop that used to have a 2TB HDD inside. I recently have changed the HDD for an SSD. I have a flash drive with windows 10 on it and I am trying to get the computer to boot from the flash drive. However it is stuck on a screen that says " No bootable device " and I cannot open the bios, and pressing any key does nothing. What do I do? My laptop is an Acer aspire v17 Nitro. I am also 99.9% positive I connected the SSD correctly.
click here,dcEUueb (If the link doesn't work)
Thank you.

Answer:Laptop not booting after SSD installation

click here,dcEUueb
This is the link, it looks like the forum post messed it up.

1 more replies
Relevance 43.87%

I am trying to reformat my pc with a windows xp prof. ultimate edition, but when I inserted my installation cd and I pressed any key to booth from cd it takes very long. Then an error message appear which says "Could not find NTLDR". Please help me how to fix this error. Thank you.

Answer:[SOLVED] Installation CD not booting

NTLDR is a boot loader program for Windows XP.

Can you try running the install from a USB cd-rom?

8 more replies
Relevance 43.87%

When I boot my laptop, I get the message that windows cannot start because of "load needed kernel dlls.I decided to do a fresh install from my Win XP CD, and just when the Kernel Debugger files are been loaded, I get this message: Setup could not continue because of missing ntkrnlmp.exe ...Error code 7"

Answer:booting and installation errors

Check your bios settings/ram - see hereGood luck

1 more replies
Relevance 43.87%

Hi so i installed windows 10 about 2 weeks ago and i didnt like it so TIME FOR A DOWNGRADE. Try to boot to the cd and here is the screen i got

Answer:windows installation not booting...

Od you cant see the picture here Imgur: The most awesome images on the Internet

2 more replies
Relevance 43.87%

After sorting out my problem installing multiple Hard Drives and getting past that I am now faced with another problem, which is that no screen is displayed on start-up to allow selecting other drives to boot from.

I can select other drives to boot from if I boot up into the default drive and select "Change PC Settings" but that is very slow and allows mistakes if one is tired.

I think the reason for the problem is because I installed all the drives on their own separately (took out the other drives) and they are now all installed properly except for this problem.

I only need to boot from the default drive when I need to do something with that particular drive or to boot from "Windows 7 Ultimate" I tried to fix the problem with Drive Freshen (I think its called) but that didn't work.

Is there a way to fix this problem and have the screen that offers to allow booting from another drive added to the default drive, without doing a total re-install please ?

On a multi boot system it is the first screen to display before booting the OS, and shows all the installed Drives in boxes with their names (labels) on, so that you can choose which Drive to boot from..

Many thanks for any help

Roger912

Answer:After installation NO screen to allow booting from another

You could fix that with Download EasyBCD 2.2 you can ad any OS to the boot menu without resorting to BIOS changes.

6 more replies
Relevance 43.87%

Hello,
I have just installed Windows 8.1 and would like to know how I can boot with Windows 7. I have Windows 7 when I installed Windows 8. Is there a way to go back to Windows 7 with no re install?
Thanks

Answer:Booting with Windows 7 instead of 8 after installation.

How did you install 8.1? To a different partition?

4 more replies
Relevance 43.87%

So I have a laptop that used to have a 2TB HDD inside. I recently have changed the HDD for an SSD. I have a flash drive with windows 10 on it and I am trying to get the computer to boot from the flash drive. However it is stuck on a screen that says " No bootable device " and I cannot open the bios, and pressing any key does nothing. What do I do? My laptop is an Acer aspire v17 Nitro. I am also 99.9% positive I connected the SSD correctly.

Answer:Laptop not booting after SSD installation

I used the Windows USB/DVD tool from Microsoft when I helped a friend build a PC. I used it to install Windows 10 on his machine. The flash drive has been unaltered since then, I checked to make sure it still had the files on it.

2 more replies
Relevance 43.87%

I've just installed my new MB because the old one died, and everything works fine (from the hardware aspect), but windows will not boot because of that MB change. Is there anything I can do except formatting and installing everything from scratch?
 

Answer:Solved: Booting the HDD after installation of a new MB

13 more replies
Relevance 43.87%

i have A1524N Hp media center desktop ..i am trying to install window proff in it ..the setups process went good and it says after restart ur setup will continue ..but when it restarts it comes again on setup menu again ..and everything start from the beginning once again ..i checked boot sequence it was on cd then hard drive ..so i removed cd from cd Rom and changed boot sequence to hard drive first ...but its not booting ..could anybody help me in that ..when it restart it shows a msg to go in confirgaration menu ..so i had tried everything in that menu ..but did't help ..could anybdoy suggest me how can i boot my computer now ..thanks in advance ?? i have tried customer service and he said ur cd is busted..so i tried another cd and same thing happened ..plz help ???

Answer:problem in booting after installation ???

Quote:





Originally Posted by bindudhindsa


i have A1524N Hp media center desktop ..i am trying to install window proff in it ..the setups process went good and it says after restart ur setup will continue ..but when it restarts it comes again on setup menu again ..and everything start from the beginning once again ..i checked boot sequence it was on cd then hard drive ..so i removed cd from cd Rom and changed boot sequence to hard drive first ...but its not booting ..could anybody help me in that ..when it restart it shows a msg to go in confirgaration menu ..so i had tried everything in that menu ..but did't help ..could anybdoy suggest me how can i boot my computer now ..thanks in advance ?? i have tried customer service and he said ur cd is busted..so i tried another cd and same thing happened ..plz help ???




G'Day bindudhindsa,

When you are initially installing Windows?XP, there will be a "Set Up" Blue Screen where you will see all the Drivers being loaded across the bottom of the screen.
Once the Drivers are loaded, and the HDD formatted, the computer will reboot to continue with the installation.
When it reboots, it will give a Black screen saying Boot from CD....Press any key to Boot from CD....
(This screen is very similar to the original Black Boot/Set Up screen that you saw.)

This time...DO NOT TOUCH IT!...Just fold your arms and DO NOTHING!

This it quite normal, just leave the scree... Read more

2 more replies
Relevance 43.87%

Ok I'm totally new to this Linux deal, but I have to use it for my CIS courses at University. So I figured I would install it on a separate IDE hard drive. However, my windows hard drive happens to be SATA, which Red Hat does not support. So when I'm installing Red Hat it gives me the option to add an another operating system so it will be able to dual boot. But the problem is that my windows partition is on my SATA HD. So is there any way I will be able to Dual boot my system? Any help would be great!

Thanks
 

Answer:Red Hat 9 Installation and Dual Booting

Like this.
 

1 more replies
Relevance 43.87%

Yesterday , randomly , when I turned on the computer I saw nothing but a black screen. It wasn't the black screen of death , looked like a windows black screen but it just wasn't displaying anything. Its almost like windows is operating normally in the background , its just not showing me. When I put the disk in it comes up occasionally and works fine , but when I shut down and turn it back on its back to the same ole thing.

I have windows 7 home premium , 32-bit. I read somewhere that I may need to check the boot order , but I have no idea how to do any of this.

Any Ideas ?

Thank you in advance.

Answer:Why is 7 only booting when I have the installation disk in ?

Follow the tutorial Startup Repair minutely.

Run it at least three times, with restarts after every single run, and see if it boots normally or not. Post back with results.

5 more replies
Relevance 43.87%

Hello All,

I installed Win 7 x64 on my PC which was running Win XP SP3 x64 without any problems.

I formatted my drive and did a clean install. After install my sytem wont boot and it says
File: ntoskrnl.exe
Status: 0xc0000428
Info: Windoes cannot verify the digital signature for this file.
My BIOS is the latest for my Gigabyte G31M-ES2C and I formatted the complete hard drive before install using GParted. I have cleared my CMOS memory and I tried reinstalling and repairing the system too. I checked my TwinMos 2GB RAM for errors and it is fine too. I have two hard drives both SATA WDC caviar blue 250gb (master) and 160gb(slave).

I still cant figure of why this happens. Does someone has a method to solve it and get my system running again.

-Insoft

Answer:Fresh Installation not Booting

Hi Insoft and welcome to SF!
The error code indicates that the issue is related to file corruption. Just to add to what you have dont to fix this, most likely a Repair installation would take care of this problem.
You can also try to press F8 during the boot process and then select the option "Disable Driver Signature Enforcement"
Otherwise you should follow the repair steps to do a restore or to copy the file from a known good location.
If there are bad sectors on your hard disk, then running CHKDSK /R from the command prompt would also fix this as it did for you.
Let us know the results.
Hope that helps.

9 more replies
Relevance 43.46%

I formatted my hard drive and when i try to boot from my xp installation disk it comes to a screen that says bootmgr missing. What can be done?

And i'm very sure that i had already change the bios set up for the first boot is CD\DVD, but the problem is keep coming, can someone help me?

My computer is Compaq Presario CQ40, a very old computer O_Q

Thank you very much.

Answer:bootmgr missing when booting from xp installation cd

Hi and welcome to TSF go back into the bios and check the cd\dvd drive and if need be set it as first boot device again then save and exit using F10

7 more replies
Relevance 43.46%

Frozen black screen on startup

My computer was only running firefox and then completely froze out and I couldnt open task manager, switch users or anything. I let the computer sit there for a while not wanting to click anything thinking it would unfreeze by itself in a short while, and then suddenly a noise started coming out at regular intervals. Then the computer just switched off.

On restart I got a BSOD that i wrote down but ive lost the paper for the error message now. I ran the Recovery Console from the XP CD and chkdsk /r and it finished. When i restarted I got another BSOD:

"UNMOUNTABLE_BOOT_VOLUME"

I ran chkdsk /r using the Recovery Console again, with it completing and then this time on restart I got another BSOD message.

"Stop:C0000135 (unable to locate component) This application has failed to start because USP10.dll was found. Re-installing the application may fix this"

I ran chkdsk again a few times and nothing happened, still getting the same BSOD message on restart.

After more googling I found out to run a repair installation from the XP CD instead of the Recovery Console, the website I used just told me to "continue with on-screen instructions". So I ran the repair installation and the first time I ran it, the computer restarted and I thought it had been fixed. Windows XP appeared to be installing itself for the first time and I paniced because I thought I had accidentally pressed the wrong button and chosen to fresh i... Read more

More replies
Relevance 43.46%

My computer is currently set up to dual boot between Windows 7 and Windows XP. I mainly use the XP partition as storage, while I run the Windows 7 partition most of the time. The version of Windows 7 that is currently installed is an RC version (Build 7127).

I recently decided that it was time to upgrade to the full version of Windows 7 (32-bit, to keep things simple). The operating system installed with no apparent errors, until I tried selecting Windows 7 from the Windows Boot Manager at start-up. The Windows XP partition (listed as Earlier Version of Windows) still works, but the Windows 7 partition gives an error (Status: 0xc0000225). The info it gives is: "The boot selection failed because a required device is inaccessible". The given error has something to do with asking me to unplug anything I had recently plugged into the computer (USB device/MP3 player), but I haven't plugged anything in, so that led me to believe it was a driver problem. However, it seems odd that the RC version of Windows 7 works, while the final version does not. So, I re-installed the RC version so I could use the computer again (the XP partition has driver problems that cause Very strange errors on the internet, so I prefer to not use it, but don't look into those errors too much... I only use that partition for storage now)

I tried reinstalling multiple times, and I tried using the Startup Recovery tool that's on the installation disk, but it couldn't detect any problems. Also, ... Read more

Answer:Windows 7 Not Booting Properly After Installation

Bump for the day ~ All help is appreciated, so if anyone has Any ideas, post them :)

6 more replies
Relevance 43.46%

I formatted my hard drive and when i try to boot from my xp installation disk it comes to a screen that says bootmgr missing. What can be done?

Answer:bootmgr missing when booting from xp installation cd

It means your computer is still trying to boot from the hard drive, not from the CD.
You need to go into the BIOS Setup, set the CD-ROM drive as the first boot device, then press F10 to "Save and exit".

When booting from a Windows installation CD you should get a prompt to "Press any key to boot from CD". If that prompt doesn't appear it means your PC is not booting from the CD.

3 more replies
Relevance 43.46%

Hi everyone... i've been searching around the internet for solutions to my problem but i cant seem to find anyone with the same specific problem as mine..

so my problem is i have an HP pavilion dv6500 which came with windows vista 32bit... now i want to downgrade it to XP Professional 32bit.. my bootable cd already comes with SATA drivers since my laptop uses SATA.. boot priority set to CD/DVD ROM.. my CD-ROM works fine and is detected by bios.. my disc is 100% bootable coz i tried it on different laptops and it boots on all of them... EXCEPT for my laptop mentioned earlier..

so there's my problem... a bootable disk not booting even with proper settings... i have tried a different disk which is my windows xp home edition cd which does boot but does not have sata support so it doesnt detect my HDD.. so i dont know where the problem might be...

xp pro disk wont boot but xp home edition boot
both disks boot on other laptops...
both OS's are 32 bit..

Hope someone can help... thnx a lot!

Answer:XP PRO installation disk not booting on certain laptop

and welcome to the Forum

If you have the BIOS set to boot first from the CD/DVD drive, and you do not get the prompt to "Press any key to boot from CD" either the drive or the disc is faulty.

Since the pc will boot from an original installation disc, the drive has likely weakened with age and will not recognize a copy. . . That is not unusual.

Most newer BIOS allow an Alternate method for SATA . . Go into the bios and check the "Sata Operation" setting,

change it to "Raid Autodetect/ATA if it is not already. Now try to install XP ( could be IDE Mode, Compatibility Mode or Legacy Mode - different BIOS use different terms )

some will say IDE instead of ATA)

1 more replies
Relevance 43.46%

My computer is currently set up to dual boot between Windows 7 and Windows XP. I mainly use the XP partition as storage, while I run the Windows 7 partition most of the time. The version of Windows 7 that is currently installed is an RC version (Build 7127).

I recently decided that it was time to upgrade to the full version of Windows 7 (32-bit, to keep things simple). The operating system installed with no apparent errors, until I tried selecting Windows 7 from the Windows Boot Manager at start-up. The Windows XP partition (listed as Earlier Version of Windows) still works, but the Windows 7 partition gives an error (Status: 0xc0000225). The info it gives is: "The boot selection failed because a required device is inaccessible". The given error has something to do with asking me to unplug anything I had recently plugged into the computer (USB device/MP3 player), but I haven't plugged anything in, so that led me to believe it was a driver problem. However, it seems odd that the RC version of Windows 7 works, while the final version does not. So, I re-installed the RC version so I could use the computer again (the XP partition has driver problems that cause Very strange errors on the internet, so I prefer to not use it, but don't look into those errors too much... I only use that partition for storage now)

I tried reinstalling multiple times, and I tried using the Startup Recovery tool that's on the installation disk, but it couldn't detect any ... Read more

Answer:Windows 7 Not Booting Properly After Installation

6 more replies
Relevance 43.46%

I have a windows xp installation cd extracted to a partition on a computer which I want to netboot from. Then I've netbooted into WinPe which is apparently able to invoke a windows installation given a source directory. The problem is, I'm stuck in volume Q: - which is a ram-disk and I haven't the slightest clue how I'd swap over to the volume I've extracted the xp install disk into.

Thanks.
 

More replies
Relevance 43.46%

I built Steve Walton's 8/2014 "Budget Box" with the Kaveri A8-7600 and the recommended motherboard, memory, SSD, optical drive, case, and monitor. No overclocking. Beautiful to look at. The very first time I powered up I was able to install Windows 7 64-bit, but it crashed during the giant Windows Update process and would not reboot. Assuming that the installation was corrupted by this, I tried re-installing Windows 7, and was able to reformat the drive but it crashed during the "completing installation" step. Now I can no longer boot from the Windows 7 CD at all; at the "Starting Windows" screen it bluescreens 0x3b, 0x50, or 0x7e + ACPI.sys.

I am able to boot Hirens 15.2 from CD or USB on this build, so I can run tests. Below are my fault isolation attempts:
- memtest86+ each stick, each slot, each overnight. No errors.
- prime95 overnight. No errors.
- chkdsk /r on the SSD (attached as a data drive to a working PC). No errors found.
- Tried with SATA configured as IDE in the BIOS, no effect.
- Swapped out PSU and memory from a working PC. No effect. Attached working graphics card, no effect.
- Tried a spare Windows 7 installation CD, then a Windows 7 installation USB, no effect.
- Stripped motherboard of everything non-essential, no effect.
- Replaced motherboard, same model, no effect. Re-tested all of the above, no component errors, same bluescreens.
- Successfully installed Windows 7 on the SSD using another PC, then moved the SSD to t... Read more

Answer:BSOD booting from Win7 installation CD/USB

"Tried with SATA configured as IDE in the BIOS, no effect"... Is the SSD normally configured on a SATA 3 port and set as AHCI?
 

15 more replies
Relevance 43.46%

I just installed windows xp on an old compaq presario computer I have. The installation went fine, and everything was running perfectly. But the computer froze and I had to reboot it. Now it will not boot up at all. It doesn't even get to loading windows xp, it just stops with a flashing cursor on the screen over the Compaq logo. I cannot access the bios screen or anything. I tried to reboot from the installation disc, and that doesn't work either. Please help!!!
 

Answer:Problem booting new installation of windows xp

Please do not post duplicate threads.
 

1 more replies
Relevance 43.46%

I just installed windows xp on an older PC I have. The installation went fine and everything was working perfectly. The computer then froze and I had to reboot. Now it will not boot up at all. The computer is an Old Compaq presario, and it doesn't even start to load windows up when I boot it up. I cannot access the bios, or anything. I tried to boot from the installation disk, and nothing - it won't recognize anything. Please help!!
 

Answer:Problem booting new installation of windows xp

Try clearing CMOS
 

1 more replies
Relevance 43.46%

I am having problems booting with my PC. At first, I tried all windows recovery options but doesn't help. I always get a blue screen which says 'Your PC ran into a problem' and auto restarts. Later when I ran a quick hard drive test, I got the following feedback. Smart Check: Passed; Short DST: Failed. The failure id is GUW2TQ-6Q68KS-MFPX0K-60XJ03 (note: I may have mistaken the 0 for the O and vice-versa). Product id: D4B09PA#ACJ. I am using a HP Pavilion G6 Notebook PC and the warranty has expired. I have back up discs that I had ordered from HP. Also, I bought the laptop back in India and currently I am living in Germany. I am in urgent need of help. Thank you.

Answer:Issues with booting the PC and OS installation problems

Hi,Hard drive has failed.Have you backed up the data from it?There are 2 main methods you can try to salvage data from failed hard drive :1) Create LiveCD from another computer. Boot from this disc in your laptop, then copy the files from failed HDD to another external hard drive connected to notebook.https://help.ubuntu.com/community/LiveCD2) Take out the failed hard drive out. Connect it to another computer using SATA to USB adapter. Use Windows explorer to copy the files you need from HDD to another external hard drive.https://www.newegg.com/Product/Product.aspx?Item=N82E16812400542&FM=1After all these,Replace hard drive. Use HP Recovery media to factory reset after replacement.You've to replace hard drive with a new one of similar form factor2.5 inch SATA hard driveSpecs: https://support.hp.com/in-en/document/c03598619Manual: see hard drive replacement stepshttp://h10032.www1.hp.com/ctg/Manual/c03593041Use recovery media you've ordered from HP to factory reset after replacement of HDDOr you can go for clean install of Windows 8.1 Single Language 64 bit, by creating UEFI bootable Windows installation USB using Microsoft windows media creation toolhttps://www.eightforums.com/tutorials/18309-windows-8-windows-8-1-iso-download-create.htmlhttp://www.eightforums.com/tutorials/2299-clean-install-windows-8-a.htmlWindows will be automatically activated after installation while connected to internetAdditional drivers from here: https://support.hp.com/us-en/drivers/selfservice/h... Read more

1 more replies
Relevance 43.46%

Hello,
I own a macbook pro (Core Duo, 2 gig ram, 160gb hd). I am going off of the site.... http://wiki.onmac.net/index.php/Triple_Boot_via_BootCamp. I have installed the rEFIt loader and windows XP. Mac and Windows work fine. But i am not sure how to go about Linux. Apparently, the linux boot loading system and the mac os x boot loading system aren't the same and this can cause conflicts when trying to get a boot loader together?? Well, the site tells me to install linux/lilo and do some crazy configurating with them. The configurations of lilo i am sure i can figure out... I just am not sure where to begin... Am i supposed to install linux and lilo then in linux (through option/alt and loading that partition) am i supposed to change the lilo loader? Or how am i supposed to deal with Lilo. Is anybody able to decipher what they are saying or able to help me in another way going forward with what i already am working with.
I am trying to get Ubuntu on my system.
 

More replies
Relevance 43.46%

I bought a new cooler and a new atx case after moving my PC to my new case and installing my new cooler my PC wont start... well my PC still runs, fans, gpus, cpu fans, led lights etc. only my monitor and keyboard & mouse lights wont start, I also tried using a different monitor but to no avail... any ideas?

Answer:Problem in PC not booting-up after new cooler installation

Are you getting any beep codes? I'd try reseating the GPUs, memory and check all your power cables.

9 more replies
Relevance 43.46%

Hello, I had installed Samsung SSD Pro 840 on Lenovo G510 with the help of Samsung Data Migration and it was working perfectly but now i want to install new windows and its stucked on the boot progress. Some months ago i had installed new BIOS ver. 3.07 to 3.09. Furthermore, I have installed the Seagate harddrive now but having same booting issue. Maybe of BIOS ver. ?

Answer:Booting problem on Windows Installation

hi jklogic,
 
Welcome to the Forums.
 
A few questions:
1. Is the Seagate drive the orignal HDD that came with the machine (with Win8.1 preloaded)? If yes, is the system stucked on the lenovo screen (similar to this thread) or during/after the windows loading screen?
 
2. What other version of Windows are you trying to install on the Samsung SSD? If you're trying to install Windows 7 or older, have you tried to the set the following in the BIOS?
 
Security Tab:
Secure Boot = Disabled
Boot Tab:
UEFI = Disabled
Boot Mode = Legacy
Exit Tab:
OS Optimized Defaults = Other OS
 
 
Let me know how it goes.
 
Regards

3 more replies
Relevance 43.46%

Hi everybody,
I'm new to this forum and tried to find the answer for my problem.
I have a Windows 10 pro computer which booted from ssd and have 2 oldskool disc's in software raid for programfiles. I tried to run the KB4041676 update but for some reason it failed. After the failed update, the computer did not wanted to boot anymore because it couldn't find the boot devices. (Inaccessible boot device error)
After fiddeling around for a couple of days to get it going again I gave up and made a partition copy of the old install to another oldskool drive (hoping I could pull user profile and settings from it programs installed.)
Once I was done with the partition copy, I removed the disc with the copy and did a full clean install of the latest windows 10 (1709?) and updated it. The 2 disc's in raid a working perfectly once mounted.
I made a new user (to be sure it does not give any conflict) and the computer runs fine.
Now is my question, is it possible to extract/transfer the user folder and settings from the old install? (Partition copy) to the fresh install? I had a lot of programs installed like office, Adobe and much more and the biggest part of those installed programs are on the 2 disc raid as that is untouched.
Who can help me out so I do not have to reinstall all of them.
I would also like to "import" the old user folder/profile from the old install.
Kind regards,
Ralph

Answer:Get data from crashed/non booting installation

PCmover is the ONLY software that automatically transfers, restores, and upgrades all selected files, folders, settings, user profiles, and even applications. The professional version can rescue hard drive contents from non-working PC.

0 more replies
Relevance 43.46%

hey guys and girls. hopefully you will be able to help me. i've spent all day today googling and trying all suggestions to no avail.

i had windows xp pro sp3 installed on a 200GB SATA drive that started failing. so I added a 500GB SATA drive to the same channel, but as master. i also have a dvd burner and another hard drive, so when i installed windows on the new (500gb) drive this is how it was all setup

DVD-drive (channel 1 master)
IDE 80GB HDD (channel 1 slave) - media files only

500GB SATA hdd (channel 2 master) - empty, new drive
200GB sata hdd (channel 2 slave) - windows xp still installed

i went ahead and installed a new copy of windows xp to the new hard drive. everything went fine. after installation the boot screen showed two copies of windows, and the default (first) one was the NEW installation on the 500GB drive.

after going in i moved all the files from the 200GB drive to the new drive, and deleted all the folders from the old drive, including the Windows folder from it.

i kept restarting as i installed updates and there was no problem...everything working great.

then i realize that in my BIOS, the settings were to boot from the 200GB drive as it had been in the past. i changed that to boot from the 500GB drive (which has the windows files after all!) and i got "disk boot failure, please insert a boot disk and press enter".

if i change the boot order so the 200GB drive loads first, it goes into windows (from the 500gb drive!)... Read more

More replies
Relevance 43.46%

Hi all,

I'm in a bit of a situation of my own causing here. I had a lot of trouble opening up my new laptop to install an nvme drive (HP among others has begun using locktite like solutions to render maintenance and repair of devices difficult), so I installed the nvme (the original boot drive was a 7200 rpm hdd), and used samsungs data migration tool to clone the drive. And put the machine together again.

I can boot from the SSD after using bcdedit, but it gives me an OS choice that I would like to remove at bootup and remove the windows install from the hdd without removing or disconnecting the drive.

The crux of my issue is that I seek a solution that does not require the removal of the laptops backplate again to disconnect the drive. The cloned drive is working perfectly.

Answer:Booting from cloned SSD, removal of old installation

Post image of disk partitions from disk management. I fear the boot files are on hdd.

If so, we will need to move them to the ssd before wiping hdd or else pc will not boot.

There is no need to remove drives - problem is easily sorted, but we need to check your disk partitions first to do it in right order.

1 more replies
Relevance 43.46%

~Background~

There were some power failures last week which caused some errors on my hdd and I spent 3 days reading this forum, trying to fix my windows 7 boot.

I finally fixed it after running chkdisk through a Windows repair disk after trying various other solutions to no avail. Thankfully, no files were lost (Besides the most important stuff was backed up)

I have an anxiety disorder and I work solely on the PC.
This incident was very hard on my health so I want to make sure that whatever happens I can get to work.

So I had an idea.

~Idea~

A while back I was reading about dual booting and it seemed quite interesting.
So, I've had this idea.

I have a 1 TB HDD.

It has two partitions, "System Reserved" and "C".

I create a new partition called G of let's say 100GB.

I then transfer my music, videos, photos to an external drive.

I uninstall all unnecessary programms/games from C.

I make sure C has about 50-60 GB of used space.

Afterwards, I make a system image using either the Windows 7 built-in tool
or Macrium Reflect/Acronis and transfer all my media back to C.

Could I then restore that system image on the new partition?

The end result I want to achieve is to have a "backup windows 7 installation"
If something happens to my Main installation, I can get to work on the second one.
Of course I backup my work to an external drive everyday.
I don't want to lose any more working days...

A friend of mi... Read more

More replies
Relevance 43.46%

My friend and I were trying to install GTX 1050ti on the PC, we installed it just fine and installed the drivers, but when we restarted the PC after we put on the covers of the housing, the PC just didnt start again. Any help? I'll provide the specs as soon as i can.
 

More replies
Relevance 43.05%

Hi every one...I currently installed kali linux on my virtual box, but as times goes on i noticed that some features were not fully usable under the virtualisation environment such as the NAT and Bridged network protocols and some other network issues. I decided to dual boot kali with my Win10 wich is my primary OS, I followed the neccesary procedure like creating a bootable kali pendrive, disabling secure boot, enabling Legacy mode, disabling the fast boot, creating a free partition and so on.....The installation went smooth and perfect but I was unable to boot into kali's GRUB after the restart, instead, my machine boot into win10 and not even the so called black screen appeared, I wiped the partitioned space i used for the installation and started the installation all over with different pendrives, sd cards and DVDs and even downloading another ISO image with the intention that either the pendrive or the image had been corrupted but the sha1 sum is still the same with the one on the official website. I also tried other methods like using the Easy BCD toolkit and i got an error message "Due to limitations set by microsoft, many of EasyBCD features can not be used in EFI, and BCD edit to create a new entry but instead i got two win10 on my pc installing other linux distro like arch and backbox did the same... I tried using other iso burning tolls like linux live usb installer, win32 disk imager, windows iso burning tool, rufus.....the only thing i noticed was that i wasn't a... Read more

Answer:kali linux not booting to Grub after installation

@Remzified Sorry, but this is just a community self-help forum staffed by volunteers helping folks with MS Windows-related problems.HP only warranties their PCs for use with the original OS that comes preinstalled on the PCs. When you replace that or add a different OS, you then assume full responsibility for maintaining that PC.For support with Linux issues, your best approach is to post in the support forum of the Linx distro you are going to use.Good Luck 

1 more replies
Relevance 43.05%

Hello,

Any help with this would be greatly appreciated.

I've been trying to fix my laptop (Acer Aspire) for about 2 months, and it's been a bit of a saga. I've tried lots of things, and have persisted because it's seemed like I've been gradually honing in on a solution, rather than chasing a lost cause.

I was on Vista, which came with the laptop, but then the laptop got very ill, to the point where I wanted to do the Acer factory restore, but this didn't work, nor did any of the various recovery options in Windows. I was worried that the hard drive was physically damaged, so I wanted to try formatting it, which I decided to try and do in the course of installing Windows 7. This didn't work, so instead I formatted the hard drive using Ubuntu, and then tried Windows 7 again. That didn't work, because the hard drive needed to be NTFS, so I re-formatted it as NTFS using GParted.

However, Windows 7 install still isn't working: it goes most of the way but then just hangs indefinitely on a black screen with 'Setup is updating registry files' written on it. I've googled this and it seems that this is quite a common problem when installing W7. However, the problem that I have is that all of the solutions offered are to do with booting up as normal and changing things in Control Panel etc, which obviously I can't do.

I can go into more details about what has happened if needed, but basically the state of play now is:


I need to install Windows 7 from a cd-rom I hav... Read more

Answer:Need to fix a Windows 7 installation problem without booting to desktop

Hi i think I would be testing the hdd for issues try downloading and burning this to a disc or if you know the maker go to their support site and get their diagnostic tool
SeaTools | Seagate ask a friend to burn it for you use imgburn The Official ImgBurn Website
and read the tutorial on seatools for dos

12 more replies
Relevance 43.05%

I got a HP Notebook yesterday that had Windows 8.1 on it. Today I decided I wanted to reinstall Windows 10 (not upgrade, but clean install) on it and I do have experience in reinstalling operating systems. I reinstalled Windows 10 from a USB stick and when the computer restarted after the installation was done, it would keep booting from the USB stick. I exited the installation screen and then went to the BIOS to change boot priority to "OS Manager", but all I got was an error which I don't remember what it said, and then it just restarted again.

So my question is, how can I get Windows 10 to boot after is has installed and restarted? I really need help fast as I can't seem to solve this myself and it is really frustrating me.

This is my laptop: HP 15.6 Laptop - Black (Intel Celeron N3050 / 500GB HDD / 4GB RAM / Windows 8.1) : Laptops - Best Buy Canada

Answer:Windows 10 Installation keeps booting from USB after clean install

If there is no USB drive connected then the BIOS will automatically choose the next boot device in line...
(You did remove the USB drive, right?)
...for example the next on the list may be your CD drive and the one after that may be your HDD.

7 more replies
Relevance 43.05%

Hi,

I'm trying to install a Windows 7 Profession 64 bit version over a Windows 7 Home Edition 32 bit version.
I know this isn't possible without a clean install, but my problem is, the installation won't boot whatsoever.

Two days ago I installed a fresh copy of W7 32 bit over a vista 32 bit with a flash drive on a laptop with no problem, so I know how you make a bootable USB.

This time however, using the Windows 7 USB DVD Download Tool didn't cut it for me as, even though it was prioritzed in BIOS, nothing would happen and W7 32 bit would just boot like normal.

So I tried to manually set up the bootable flash drive, which also didn't work.

After a lot of searching on google, I learned the problem might have something to do with the bootsector not able to be run on a 32 bit OS.

So, I found another guide: http://www.mydigitallife.info/how-t...able-usb-flash-memory-key-or-hard-disk-drive/

I used the W7 32 bit version I used on the laptop 2 days ago, and put the bootsector of that version on the flash drive.

Again, this didn't work as the computer would just boot windows 7 32 bit like usual (and again, I adjusted the priority in BIOS)

Now I got enough of trying the flash drive to work, I tried burning the ISO file on a DVD using Imgburn.

Burning the DVD went smoothly and I quickly had a DVD with the W7 64 bit installation files.

This however, didn't solve anything as (again, prioritzing the DVD) W7 would boot up as usual.

I&#... Read more

Answer:Windows 7 installation not booting through Flash Drive or DVD

please do not duplicate posts here
Not sure if you have die to a server error - i have been experiencing here
however, closing this post
continue here
http://forums.techguy.org/windows-7/1068945-windows-7-installation-not-booting.html
 

1 more replies
Relevance 43.05%

Hi community,

I installed Vista yesterday, everything was fine.
But, when I boot the PC with XP it always says a network cable isn't connected.
The on Board LAN card doesn't work anymore.
When I switch to Vista it works. Really crazy.

I tried many things to solve the problem, like uninstalling the driver or siwthing the card off in the BIOS... nothings helps.

I know use WLAN to connect to my router, works ok, but I want to use the on board LAN again.

Anybody got ideas?

HELP ;)
Alex

Answer:Network not working when booting XP after Vista Installation

Hey Alex,

I have the exact same problem. Did you fix it? If so how? This is driving me nuts....

Thx
Kathlik.

5 more replies
Relevance 43.05%

Hi,
I've just bought new Asus R540LJ with SSD inside.
I'm trying to install Windows 10 but I get blue screen just after it boots I supose.
Nothing happens, just loading and blue screen.
Tried with pendrive usb 3/dvd. Win 8.1 and Win 10.
Is there anything I can do about it or should I send my laptop back where I bought it?

Answer:Windows 10 Blue Screen while booting installation

fryderykst,

Welcome to TenForums!

That is strange...

Doesn't the Asus R540LJ laptop come with Windows 10 already installed and working? Or, let us know if the machine did not come with an installed Operating System.

Is this a brand new SSD drive? Has it been initialized?

If not, and you first want to rule out issues with the SSD, CrystalDiskInfo can help you check the Solid State Drive's health:
CrystalDiskInfo - Software - Crystal Dew World

There is also SSD Life, or, check if the manufacturer of the drive has its own utility.

15 more replies
Relevance 43.05%

I built a new desktop and i'm trying to install windows 10 on it. I can get into the bios fine and all my components are showing up. I set my initial boot device as the USB and then reboot my PC to start the installation process. The windows logo shows up,but as soon as it gets to purple setup screen for installation my PC shutsdown and reboots. This same process keeps looping and I can't get the w10 installation process started. I only have my keyboard, monitor and USBconnected to the desktop IO panel. I tried a different USB installed with windows 7 but get the same problem.

Answer:Windows 10 Installation Crashing and rebooting while booting from USB

My mother-in-law's computer started doing that. Turned out it was the keyboard was physically bad, believe it or not. I would recommend try starting it up with no keyboard or mouse connected and see if it stays on. Also make sure all the internal components are firmly seated. Also try starting it up without the USB flash drive inserted and see if it will stay on the No Boot Device warning screen without rebooting on it's own.

1 more replies
Relevance 43.05%

It might be worth it to make a sticky referencing the Windows 7 tutorial for creating USB flash installation media, specifically the part 11 about moving the EFI files around. I have been bashing my head trying to figure out why my laptop refuses to acknowledge ANY USB Media (never tried CDs) and the conclusion I came to was that my laptop had booting from USB disabled, NOT that the ISO still doesn't have working boot files when flashed with Rufus.

It would've been nice to know before caving and upgrading (and subsequently downgrading) my Windows 8.1 install.

I am sorry that I'm ranting about this, but I honestly did try searching the problems and such, and not finding anything I assumed that it was a problem with my specific hardware.

I'm sure it is obvious where to find it, but it would be nice if in the installation and setup forum there is a sticky with links to relevant tutorials (such as setting up dual-boot, making a USB flash drive, installing the TP in a virtual machine)

Answer:Booting USB installation media on a UEFI system.

I am going to try tomorrow morning and see whether I could install Win10TP with the bootable USB drive, I always use the DVD but would like to try the USB disk.

22 more replies
Relevance 43.05%

How do I set my BIOS to have the DVD boot and install Windows 10 in UEFI mode? I do see a setting on my Asus motherboard UEFI "CSM Compatability" and in there are three options:
UEFI and Legacy OPROM
Legacy OPROM only
UEFI only

Do I select UEFI only option here?

What is the benefit of installing in UEFI vs Legacy? All I understand is that the system sets up more partitions.

Answer:Booting a Win 10 DVD in UEFi Mode for Windows installation

Anyone? :-)

10 more replies
Relevance 43.05%

I created a new partition as part of XP installation. after the formatting completed the PC the HD will not boot and hangs.With the XP installation disc after the message Setup is checking your computers hardware configuration I get a black screen and the system hangs. I cannot access the drive to continue the XO installaion.

Answer:XP installation problem, Hard drive not booting

Are you sure the partition is formatted (NTFS or FAT32)? Do you have more than one partition?

10 more replies
Relevance 43.05%

Hey guys!

I finally got tired of Vista so I have decided that this be the day that I get windows 7. The computer is backed up and ready. With the small problem of having something to boot it from. I have an iso of Windows 7 Ultimate that I want to install.

I have no dvds available. The largest usb drive I have is 2gb. I do have a 1.5TB external drive with ntfs but it's almost full at the moment so formatting it is not an option. Also I have a jailbroken iPhone 4 which I've read is possible to turn into an usb drive.

And here is my canundrum. I read something about shrinking a drive but I must admit I didn't quite understand it. I have about 200gb spare on my external harddrive, is there any way of making a partition of it to boot from without screwing up the rest of the harddrive?

Also there are a couple of different ways into turning the iPhone into an external harddrive, but I suppose it's a very bad idea to start changing the file systems of a partition in order to make it bootable?

Is there any way of making this happen today? I really just want to make this happen. Any and all help is much, much appreciated!

Edit: I tried using the external harddrive as it is and extract the ISO to the root, but I get the ntldr is missing error, which is really what brought about all this chasing around for a solution.

Edit 2: The computer I have is a Lenovo computer and it comes with this 20gig partition of whatever's on there. Going to try and boot the installation from there... Read more

Answer:Booting installation from external harddrive (iphone?)

Really go out and buy a DVD (or a pack of them) or a USB thumb big enough to hold the OS ISO.

2 more replies
Relevance 43.05%

I want to install Windows 7 on an HP Pavillion Desktop which happens to have a
Sata Harddisk with an IDE DVDRW.
I set the boot Priority to the DVDRW then the Harddisk and placed the Windows disk on the dvd drive to boot from it.
But it is not booting from the CD as booting still goes to the Harddisk.
My understanding is that SATA takes First Priority.
Well in such a scenario what does one do in order to install Windows?
Please note both drives are detected in the BIOS

Thank you all for your advise
 

Answer:Solved: New Windows Installation Booting Issues

SATA doesn't take priority, I've installed Windows 7 numerous times from PATA/IDE drives with a SATA drive.

Are you sure the DVD drive works? Can it read a DVD properly? Also you mention CD, but Windows 7 comes on a DVD.

Also since this is an HP you can press ESC, F10, or F12 and choose a one time boot device rather than changing BIOS boot order.
 

3 more replies
Relevance 43.05%

I'm using a Fuijtsu Siemens Scaleo P 2540 system.
Due to recent harddrive failure I got a new harddrive on which I installed Windows 7 Ultimate.
The installation was a big struggle, but after a few tries it looked like the OS was running.

But after installing the latest updates, AVG, iTunes and a restart or 4 it doesn't boot anymore.
Sometimes the BIOS doesn't even show the harddisk in the boot menu.
I got the DISK READ ERROR message a few times as well.
I did run chkdsk and it completed succesfully (removed a couple of corrupt indexes, no bad sectors).
Sometimes it does get to the point of showing the Windows logo and the STARTING WINDOWS. It doesn't freeze, but goes on for about 6 minutes and then reboots. Other times it doesn't load the logo and only displays STARTING WINDOWS. And if I try to open the REPAIR function, the operation quits with the message: Unexpected I/O error has occured.

Some of the errors above did occur during the installation progress (during the 1st or 2nd restart).

Mobo: MSI G31M MS-7379 v4.0
CPU: Q6600 2,4 gHz quad
RAM: 2x 2048 Mb 677 mHz ddr2

All the disc drives are SATA.

1) Would it help if I updated the BIOS software? How?
2) Could a new SATA-cable (no visual damage) solve this?
3) I've been struggling with this for a week now. Getting really sick too, but I really want to tackle this.
Is there something else I should look into?

THANK YOU !
 

Answer:Solved: Booting issues fresh installation

10 more replies
Relevance 43.05%

My machine won't boot up unless I disconnect all of the Hard Drives. I still have my two SSD's (RAID 1) that have Windows 7 Professional installed still running fine.

I had one hard drive ST4000NM0023 (4TB) fail (had four of them), and so I replaced two of them with ST10000NM0096 (10TB) drives.

I had software backing up the failed drive, which was my D: (Documents & Program Files) drive. The backup drive F: (D Backup) has now been renamed my D: Drive, and I transferred all of it's files to a new F: backup drive.

I had to copy & paste everything from one folder over to another one of the same name because Windows 7 had automatically installed new folders with the proper icons on them (as per attached image). I had two of "My Pictures", "My Documents", etc.., with one having an icon and one not.

It seems like I had to move my files to the new folders or else my other programs couldn't seem to find the files they needed even though the the folders had the same name, minus the icon.

Copying files from folder to folder was very time consuming, and used all of the systems memory. I would successfully reboot the system after each successful transfer so I could restore the RAM back to 64GB.

I left the largest folder "My Documents" till last. After I successfully transferred the files in this folder over to the new "My Documents" folder with the icon on it, I tried rebooting the system and it would not work. I ... Read more

More replies
Relevance 43.05%

Hello, - Edge E330- 6 weeks old- stucked for more then 20min- even it was not possible to enter the "disk management" in Win8- so I saved the Win8 OEM Key- start a complete new setup- but this was after 45% stopped and had an error- got the recovery DVD by post from lenovo (after 4 business days? no download possible) - recovery DVD will not accepted (the Lenovo is not booting from these) - download a Win8 RTM ISO - this runs directly and very well (is booting from this and installing it perfectly!) - so the Lenovo hotline tells me, they do not have a Win8 OEM ISO DVD, I must do it with the recovcery DVD- but these will be not accepted by the computer! - tried it with a external USB stick (FAT 32) and an SD card (FAT 32) - the data will be not accepted as a boot capable next plan: A) organize a Win8 ISO CD (not RTM),  but I guess the key will be not be accepted because of OEM,  I am right?B) return the notebook and buy a competitors notebook I appreciate any kind of help! Thanks in advancedrawonmycar   

More replies
Relevance 43.05%

I got a HP Notebook yesterday that had Windows 8.1 on it. Today I decided I wanted to reinstall Windows 10 (not upgrade, but clean install) on it and I do have experience in reinstalling operating systems. I reinstalled Windows 10 from a USB stick and when the computer restarted after the installation was done, it would keep booting from the USB stick. I exited the installation screen and then went to the BIOS to change boot priority to "OS Manager", but all I got was an error which I don't remember what it said, and then it just restarted again.

So my question is, how can I get Windows 10 to boot after is has installed and restarted? I really need help fast as I can't seem to solve this myself and it is really frustrating me.

This is my laptop: HP 15.6 Laptop - Black (Intel Celeron N3050 / 500GB HDD / 4GB RAM / Windows 8.1) : Laptops - Best Buy Canada

Answer:Windows 10 Installation keeps booting from USB after clean install

If there is no USB drive connected then the BIOS will automatically choose the next boot device in line...
(You did remove the USB drive, right?)
...for example the next on the list may be your CD drive and the one after that may be your HDD.

7 more replies
Relevance 43.05%

Trying fix a laptop, she tried to install a camera but it went wrong and now when desktop appears, "found new hardware" shows in task bar then after about 10 seconds it shuts down and re-boots.

I can get into safe mode and it runs fine. Tried a system restore but it always says "unable to restore....."

Im pretty sure its the failed installation, is there a way to stop xp trying to find the hardware? I cant find the software to remove it.

Ive tried recovery panel, chkdsk, bootcfg, fixboot and fixmbr

Thanx

Answer:[SOLVED] Failed installation now laptop keeps re-booting

If you go into device manager (Start > Run > devmgmt.msc) do you see the camera? If you see it can you right click on it and then disable it?

Also if that doesn't work you can try:

Go to Start > Run > type "services.msc" w/o quotes. Find the "Shell Hardware Detection" service and disable it and reboot into normal mode. Then see if the balloon pops up again or not. If it works, try re-enabling the service and then reboot and see if everything works.

BMR777

2 more replies
Relevance 43.05%

I've just created a Windows 10 installation USB using the Media Creation Tool.

I then booted it on my Windows 8.1 Pro desktop PC just to check the USB stick would boot. It booted to the first installation Windows 10 installation window as expected. I didn't want to do anything else so I just removed the USB drive and hit the PC restart button.

On restart, the PC did a chkdsk scan of drive C: and then started automatic repair for no apparent reason!

After a few minutes of watching the automatic repair rotating circle, I just powered off the PC and restarted the PC and it booted fine straight into Windows 8.1 as normal.

Why would removing the Windows 10 USB then pressing the reset button cause chkdsk to run and automatic repair to be invoked on restart?

Answer:Curious Problem Booting from Windows 10 Installation USB?

Steve C said:

I've just created a Windows 10 installation USB using the Media Creation Tool.

I then booted it on my Windows 8.1 Pro desktop PC just to check the USB stick would boot. It booted to the first installation Windows 10 installation window as expected. I didn't want to do anything else so I just removed the USB drive and hit the PC restart button.

On restart, the PC did a chkdsk scan of drive C: and then started automatic repair for no apparent reason!

After a few minutes of watching the automatic repair rotating circle, I just powered off the PC and restarted the PC and it booted fine straight into Windows 8.1 as normal.

Why would removing the Windows 10 USB then pressing the reset button cause chkdsk to run and automatic repair to be invoked on restart?



Perhaps it had already begun rebuild boot files.
You probably should have aborted the install, closing the windows then clicking 'Yes' when prompted 'Are you sure you want to quit the installation?'
Are you booting to the USB trough the BIOS or are you opening the USB and clicking on the 'Setup.exe'?

2 more replies
Relevance 43.05%

I've just created a Windows 10 installation USB using the Media Creation Tool.

I then booted it on my Windows 8.1 Pro desktop PC just to check the USB stick would boot. It booted to the first installation Windows 10 installation window as expected. I didn't want to do anything else so I just removed the USB drive and hit the PC restart button.

On restart, the PC did a chkdsk scan of drive C: and then started automatic repair for no apparent reason!

After a few minutes of watching the automatic repair rotating circle, I just powered off the PC and restarted the PC and it booted fine straight into Windows 8.1 as normal.

Why would removing the Windows 10 USB then pressing the reset button cause chkdsk to run and automatic repair to be invoked on restart?

Answer:Curious Problem Booting from Windows 10 Installation USB?

Originally Posted by Steve C


I've just created a Windows 10 installation USB using the Media Creation Tool.

I then booted it on my Windows 8.1 Pro desktop PC just to check the USB stick would boot. It booted to the first installation Windows 10 installation window as expected. I didn't want to do anything else so I just removed the USB drive and hit the PC restart button.

On restart, the PC did a chkdsk scan of drive C: and then started automatic repair for no apparent reason!

After a few minutes of watching the automatic repair rotating circle, I just powered off the PC and restarted the PC and it booted fine straight into Windows 8.1 as normal.

Why would removing the Windows 10 USB then pressing the reset button cause chkdsk to run and automatic repair to be invoked on restart?



Perhaps it had already begun rebuild boot files.
You probably should have aborted the install, closing the windows then clicking 'Yes' when prompted 'Are you sure you want to quit the installation?'
Are you booting to the USB trough the BIOS or are you opening the USB and clicking on the 'Setup.exe'?

2 more replies
Relevance 43.05%

Hi,

I've got a problem with my Windows 7 installation in that - it wont boot! Either in normal or safe mode!

I've tracked the problem down to a driver - CTMMount.sys which was installed by a recent installation of Comodo Time Machine - which has since been uninstalled but doesnt look like the uninstallation has worked correctly.

Therefore I could do with editing the registry/startup procedure so that this file doesnt attempt to load and then I can get back into Windows 7 - has anyone any idea how I can do this?

Thanks

Ewan

Answer:Need to edit registry on non-booting Windows 7 installation

Why don't you just try a startup repair? It's probably a bit safer.
Startup Repair[2]=Performance Maintenance

9 more replies
Relevance 43.05%

Hi,

I'm trying to install a Windows 7 Profession 64 bit version over a Windows 7 Home Edition 32 bit version.

I know this isn't possible without a clean install, but my problem is, the installation won't boot whatsoever.

Two days ago I installed a fresh copy of W7 32 bit over a vista 32 bit with a flash drive on a laptop with no problem, so I know how you make a bootable USB.

This time however, using the Windows 7 USB DVD Download Tool didn't cut it for me as, even though it was prioritzed in BIOS, nothing would happen and W7 32 bit would just boot like normal.

So I tried to manually set up the bootable flash drive, which also didn't work.

After a lot of searching on google, I learned the problem might have something to do with the bootsector not able to be run on a 32 bit OS.

So, I found another guide: How to Install Windows 7 or Vista from Bootable Portable USB Flash Memory Key or Hard Disk Drive ? My Digital Life

I used the W7 32 bit version I used on the laptop 2 days ago, and put the bootsector of that version on the flash drive with CMD.

Again, this didn't work as the computer would just boot windows 7 32 bit like usual (and again, I adjusted the priority in BIOS)

Now I got enough of trying the flash drive to work, I tried burning the ISO file on a DVD using Imgburn.

Burning the DVD went smoothly and I quickly had a DVD with the W7 64 bit installation files.

This however, didn't solve anything as (again, prioritzing the DVD) W7 ... Read more

More replies
Relevance 43.05%

Hi friends,
my vista home basic is not booting from this morning. i spent this whole day to correct it but nothing worked for me.

i put my recovery cd but the recovery option cannot detecting vista. morning there 5 options for recovering . but now i cannot even format the hard disk , so now i cannot do a new installation also. when i try to do a new installation it is asking for load the drivers. i have done that . my hard disk is 8o gb and it shows that 10 gb is using for recovey and the other 70 gb unallocated place when i try to create a new partion it fails. i dont know what to do. mine is a dell inspiron530s desktop

yesterday i shutdown the PC normal way. but this morning its not booting. today only i did some BIOS changes and again i changed it to default settings.

morning there was one option recover to factory image settings but now there is no option like that............

please help meeeeeeeeeeee

Answer:Help me i am in trouble vista booting problem now cannot do new installation also

Hi
I suggest you read the following thread, particularly the second post which is by OldGrayGary. That may help provide the solution to your predicament.

www.techsupportforum.com/microsoft-support/windows-vista-support/174502-window-vista-winxp-both-exist-1-comp.html

1 more replies
Relevance 43.05%

Hi there!

I am trying to do a clean install for Windows XP. I inserted the bootable CD and started the computer. It asked "press any key to boot from cd" as usual. I pressed a key and "inspecting hardware configuration" appeared.

Unfortunately just a second after that screen turned blank and stayed so. I tried many times and waited a while also. Didn't help.

If it is relevant, Windows Vista is currently installed to the computer. I'd like to format the C: drive and substitute Vista to XP again. Thought, that it doesn't matter when running XP installation from boot cd, but who knows.

Thanks for Your help!
 

Answer:Solved: Blank screen when booting from XP installation CD

16 more replies
Relevance 42.64%

Hello. I'm not sure if this is the correct forum for this topic but I think it is.

I have a Toshiba Satellite laptop running Windows 7. Recently I made the decision to restore my system to "out-of-the-factory" settings using the Toshiba program that came with the computer to do this. This went well.

when this was done, the computer restarted, and after the normal start-up screen, it began installing windows.

About halfway through this process, my brother decided it would be funny to turn off the computer in the middle of the installation.

when I turned the computer back on, it went to the windows installation again, but very soon an error message came up saying

"the computer restarted unexpectedly or encountered an unexpected error. windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation."

However, after pressing OK, the computer restarts, but the same error message comes up, leaving me in a loop.

So is there anything I can do to fix this? Or does my brother owe me a new computer?

Btw I don't care about losing data, I have everythign backed-up on an external hard drive.

Answer:"Computer restarted unexpectedly....windows installation cannot proceed" installation loop.

I think you need to reformat C: (delete the partition) and (redo partition) using ntfs drive and restart the installation. Do you have a OS Windows Disk?

7 more replies
Relevance 42.23%

Hi all,

I've been attempting to do a clean install (following the tutorial here) on an HP Probook 5310m, using a USB installation disk created from a genuine ISO (from msft.digitalrivercontent.net) with the official Windows 7 USB / DVD tool.

The initial phase of the installation ran without any errors but after the first reboot the installation went back to the start (i.e. the "select language" etc. screen) and did not continue automatically. As I was unable to re-start the installation, I decided to take a rest for the night and so shut down the computer, cancelling the installation completely. Prior to the installation I had prepared the HDD via the method shown here, ensuring there was only one partition before I started the installation.

Now, upon power up, I am greeted with the infamous BCD boot error 0xc000000f, even with the same USB disk used previously inserted and the BIOS set to boot from USB hard drive. I cannot boot from the USB disk regardless of its contents (I tried Partition Wizard and a "Repair Disk" I found online). As a result I can't access StartUp Repair, Advanced Boot or bootrec.exe.
However, if I physically remove the HDD from the SATA connector I am able to boot to the USB disk. Installation operates as normal but obviously there is no disk to install to.

My question is: how should I proceed from here? To my mind, there are 3 options :Buy a new HDD
Buy a SATA-USB cable and attempt to format existing HDD on my other lap... Read more

Answer:BCD Boot error 0xc000000f while booting from USB installation disk

Actually, now that I think about it, inserting the HDD after booting probably wouldn't work as all the hardware has been scanned and initialized by then. If anyone has any other ideas they would be much appreciated!

JC

9 more replies
Relevance 42.23%

Hi there. I've built a brand new HTPC and it has UEFI BIOS on it. I've tried to install Windows 7 with USB drive that I've made UEFI bootable with Rufus, but it gives me blue screen everytime after Windows goes from "Windows files are loading" screen to a Windows logo animation. The hard drive that I'm using is set to MBR, (I know that I should set it to GPT for UEFI installation). I don't want to have a UEFI version of Windows in my system anymore. How do I install legacy version of Windows 7 from USB stick on UEFI BIOS capable PC with HDD using MBR?

Answer:How to prevent Windows 7 installation from booting in UEFI mode?

Hi and welcome to SevenForums,
Enter your bios and go to Advanced and boot and disable secure boot,
If there is no option to disable secure boot look for OS Type and switch to Other os
After installing Microsoft Update KB3133977 for Windows 7, some users may encounter a "Secure Boot Violation" , which makes the system fail to boot into the operating system.

5 more replies
Relevance 42.23%

Ok, I have an external hard drive (150GB) which is partitioned into two parts. One partition , about 145gb, is data and files of my own. Then there is an extended partition at 5gb in size, which contains windows xp installation files. What I did was take my windows xp cd, make an ISO, and then extracted the iso and put the files into the extended partition of my external usb hard drive.

The computer I want to install to has a cd drive that is not working and thus i cannot install windows xp from a cd. The BIOS of the computer DOES support booting from a USB device.

I have partition magic software and have used it to create the 5gb extended partition on the usb external drive. However, I don't know how to configure anything so that it will acutally know to boot from this partition and what files to use to start the installation.

Any ideas!!?
 

Answer:booting a windows XP installation from an external hard drive

The partition on the external drive that contains the installation files needs to be an active partition in order to boot from it.

Personally, I would install a working CD drive. They are quite inexpensive these days.
 

3 more replies
Relevance 42.23%

Hi everyone,

I am using Windows 7. I tried installing ubuntu with the option " Include Ubuntu along with window partition".

While installing ubuntu, error occurred. Now unable to boot Windows also. It prompts for recovery cd.

I am not having recovery disk.

Tried using other machine's recovery cd - Diskpart. But got the following error while selecting a partition.

virtual disk service error:
this operation is not allowed on an invalid disk. The disk may be invalid beacuse it is corrupted or failing, or it may be invalid because it is offline.

Required your help to recover windows without affecting the existing data.

Thanks.

Answer:Error in booting Windows after Ubuntu installation failure

Try a Startup Repair:
Startup Repair
Note: You may need to do startup repair 3 to 4 times.
Startup Repair - Run 3 Separate Times




   Information
We always assume you have made your Recovery Disks using the OEM manufacturer's Recovery Media Creator app the first day you had your new PC.
& made the Startup Repair CD.
startup repair disc-create



Did you make the OEM manufacturer's Recovery Disks?

2 more replies
Relevance 42.23%

Hi,

I'm trying to install a Windows 7 Profession 64 bit version over a Windows 7 Home Edition 32 bit version.

I know this isn't possible without a clean install, but my problem is, the installation won't boot whatsoever.

Two days ago I installed a fresh copy of W7 32 bit over a vista 32 bit with a flash drive on a laptop with no problem, so I know how you make a bootable USB.

This time however, using the Windows 7 USB DVD Download Tool didn't cut it for me as, even though it was prioritzed in BIOS, nothing would happen and W7 32 bit would just boot like normal.

So I tried to manually set up the bootable flash drive, which also didn't work.

After a lot of searching on google, I learned the problem might have something to do with the bootsector not able to be run on a 32 bit OS.

So, I found another guide: http://www.mydigitallife.info/how-t...able-usb-flash-memory-key-or-hard-disk-drive/

I used the W7 32 bit version I used on the laptop 2 days ago, and put the bootsector of that version on the flash drive.

Again, this didn't work as the computer would just boot windows 7 32 bit like usual (and again, I adjusted the priority in BIOS)

Now I got enough of trying the flash drive to work, I tried burning the ISO file on a DVD using Imgburn.

Burning the DVD went smoothly and I quickly had a DVD with the W7 64 bit installation files.

This however, didn't solve anything as (again, prioritzing the DVD) W7 would boot up as usual.

I&... Read more

Answer:Solved: Windows 7 installation not booting through Flash Drive or DVD

14 more replies
Relevance 42.23%

I have set up my usb using rufus and UUI. When I boot my pc with the usb its freeze in windows 10 blue logo screen, i've tried to create bootable using 2 different software but still freeze.
Here a picture where its freeze

My current OS windows 10 32bit and i like to install 64bit.

Answer:W10 clean install. Booting from USB freezes before installation page

Sometimes an unrecognised USB device can cause problems, try removing all unnecessary USB devices before running the install. You can reconnect them after the install is complete.

5 more replies
Relevance 42.23%

I have been given the challenge to make a way to install Windows without any installation media and without having to even touch the computer while it's installing. So far I've made a .wim image with the help of this guide and I've made an Autounattend.xml file with the help of this guide. I put the install.wim image in the \sources directory on a flash drive and the Autounattend.xml file in the root of the flash drive, and it does exactly what I want it to - all except it's not on a partition. So I move it to a partition and add a boot entry using EasyBCD. It boots fine, but it acts like the Autounattend.xml file isn't even there. So right now I have the choice of hands free installation with media, or manual installation without media. My main question is why the Autounattend.xml file isn't working when I boot the same media from a partition. Any help is greatly appreciated.

Answer:Problems booting an unattended Windows installation from a partition

Is this some sort of school project? I can't vouch for anyone else, but I would feel terrible if I gave you information that basically did the project for you.

Usually people do this with Windows PE. Have you checked it out?

6 more replies
Relevance 42.23%

My pc won't load windows 10.. it gives Error code 0xc000000f.. it allows me to go to startup settings, to start in safe mode, in low resolution mode etc..., but anyway it wont log in, it gives an error UNMOUNTABLE_BOOT_VOLUME... So i decided to install a windows 7 with a bootable usb.. and when I boot from usb it loads the installation windows screen, then the windows logo, and then stucks in a black screen with a cursor and no options... I tried burning the windows in a dvd.. same problem.. anyone has some solutions ?

More replies
Relevance 42.23%

Okay, so let me first tell you that I am in a state of panic. I have very important data on my HDD and am unable to boot any OS on it now.

I initially had Vista and 7 on it, working, until I decided to uninstall 7 for XP. I deleted the partition 7 was on (C; my primary partition) and installed XP onto it. That went smoothly and all, but after booting it up I noticed it wouldn't let me specify which OS I wanted to start; it would just auto start XP. I went into the bootup settings in XP and changed the time operating systems are displayed from one second, to ten, yet it still just auto-booted XP. I was able to access the data on the other partition in the XP explorer, but seemingly wasn't able to boot from it. So I "backed up" all my data onto a third partition I had created as a failsafe in case something went wrong and I couldn't boot either of my OSes.

It then came to my attention that I had installed Windows XP Professional instead of home edition, so I made a bootable CD with the XP iso and restarted the computer for reinstallation. According to the program, the setup files copied over fine and all, but when it auto-restarted to continue the installation process it would just loop on and off at the BIOS screen. After trying 4 different versions of XP to no avail, I stuck my Vista Home Premium disk in and booted from it. Again, I got to the setup screen and all that jazz, but when prompted to select the location I wanted to install Windows in, I go... Read more

Answer:Vista installation does not find any drives during installation, computer won't boot

hello,

do you have a way to download and burn a linux live cd, that would get all your pictures back then concentrate on the other..

http://www.livecdlist.com/

someone else may have other ideas..

good luck

10 more replies
Relevance 41.82%

Anyone have any information on a particular problem with dell computors booting from the cd rom drive or dvd drive. My problem is I have tried to do a boot from my XP installation cd and the resource cd (both bootable discs) to bring windows up into recovery console. Both these disks were included in my purchase of the unit direct from Dell. After doing some checking on this issue i found many suggestions on how it might be done. So far it doesn't work the conventional way just pop it in and boot. doesn't work if you reset the boot sequence, and it doesn't work if you try to disable the SATA drive, and different variations of turning on and off either of the two optical drives. After selecting boot cdrom at the boot option window it always says cdrom is unavailable. Now Dell has not posted a solution to this issue on the support web site it only suggests the doing the same steps i have tried. Several users have this issue which have posted in various blogs but no one seems to have a fix. Any help would be appreciated.

Answer:Problem booting windows XP installation disk and Dell computors

What is the model of this Dell.

16 more replies
Relevance 41.82%

I just put a new hard drive in. Didn't work, messed around found out it was the CMOS. Booted up first time, got the "Found new hardware" thing. I then partitioned and formatted it and it worked great, until it got to 100% then the whole thing froze. No mouse not tab no nothing. Had to do a hard shutdown. Now when I boot up it gets to the screen with the blue bar scrolling across on the bottom.


After that it flashes the BSOD. Then it restarts itself. It then asks me if I want to start in safemode and all that kind of stuff. I click on any of them and goes back to the windows screen. Up pops the BSOD and start the whole process over again.



Also, it does not recognize my optical drive./

Can anyone help me?

Answer:Booting up after new hard drive installation problems. Also BSOD problem

Its probably a bad drive.

What is your EIDE Configuration?

How are the slave and master set and state what drives and Optical drives are on which channel.

3 more replies
Relevance 41.41%

Hiya,

Firstly I should say that I am primarily a mac user, and it is not my laptop I am posting about. Although I am reasonably knowledgable about Windows, I haven't used it since XP, about four years ago, and so am pretty rusty.

Basically, my girlfriends computer randomly turned off about a week ago, she assumed it was a dead battery, plugged it in, and then when it turned back on it wouldn't boot displaying error message: missing operating system.

As it is a Dell laptop it didn't come with any installation discs, and I totally forgot to even make a repair disc when we got the laptop. I managed to get hold of a Windows 7 Installation Disc and license key for Windows 7 Ultimate 64 bit through my university. I think the laptop was previously running Windows 7 Home Premium, but that's all I know, and I'm not entirely sure of that fact.

Anyway, burnt the .iso to disc and have tried to boot several times from DVD Drive. The laptop loads the files from the DVD fine, and gets as far as the "Starting Windows" screen, where it seems to get stuck for a few minutes, until it becomes a black screen with just a cursor (the cursor still moves). This also happens with an 64 bit repair DVD I also managed to get hold of.

Any ideas on what I should or can do next?

Thanks

Answer:Missing Operating System - Booting from installation disc doesn't work

Welcome To Windows Seven Forums.

Please have a look at this excellent tutorial.

Troubleshooting Windows 7 Failure to Boot

9 more replies
Relevance 41.41%

I thought I'd give Windows 10 a try in the virtual machine using VMWare player, but I'm just not having any luck with it. My host computer is a lenovo laptop with a Pentium T2390 dual core processor running Windows 7 x64, attempting to run Windows 10 x86 in VMWare player (apparently my cpu is incompatible with virtualization of 64 bit operating systems). When I boot from the ISO, I see the blue windows "pane" for a few moments, but right before the little round dots are supposed to appear underneath it, I get:

"Your PC needs to restart.
Please hold down the power button.
Error code: 0x0000005D
Parameters:
0x3060F0D
0x756E6547
0x6V65746E"

Just to see what would happen, I tried a 32 bit Windows 8 ISO as well and got the same exact thing (yes, I do have "Windows 8" selected as the guest operating system inside of VMWare player, and I have tried other options as well just to see what would happen, they all do the same thing). A Windows 7 (or earlier) 32 bit installer iso will boot up just fine. I have "Burned" this iso to a USB drive and successfully booted the Windows 10 x86 installer on two computers (including the one on which it refuses to work in a VM), so I know that the iso is good and that the computer should be compatible (I did give the bios setup a quick run down to make sure there weren't any virtualization settings that might conflict with what I'm trying to do as well and didn't see any).

Any ideas why it won't work?

Answer:[SOLVED] VMWare Player: Error 0x5D when booting from installation media

Ah Hah! I answered my own question. Apparently the problem was that even though my processor supports DEP (or "No Execute"/"Execute Disable"), it is disabled in BIOS by default. The catch is that because this was a "value line" computer, there is no option in the BIOS/setup screen to enable this.

The key to getting things to work was following the directions in this thread over on the lenovo forums and use SYMCMOS to change the settings. Here's a step-by-step for anyone else who might happen to be stuck in this boat with a Lenovo N200 or similar laptop:

1. Use Rufus to create a bootable USB drive of FreeDOS.
2. Download Symcmos and place it on the root of the newly created USB drive.
3. Download a DOS text editor. I used "edit" (simply open the ZIP file and extract EDIT.exe to the root of the USB drive).
4. Boot from the USB drive and use the command "Symcmos -?" to see all the commands and their usage.
5. Run "Symcmos -Lsettings.txt" to export all the current settings to a text file called "settings.txt".
6. Type "edit settings.txt" to open the exported file and see all the things that can be changed. The Number on the left in parentheses identifies the setting and the number on the right in brackets configures the settings. For example, The number accompanying "(0267)" will be "[0001]", which means, "disable D.E.P.". Remember that these will be differe... Read more

1 more replies
Relevance 41.41%

I have system with Dual boot (Windows 2000 and Red Hat Linux)
I have "Oracle Application installation dump for Linux" in Windows 2000 system
How to access(Install) this dump booting with Linux o/s
 

Answer:How to acess the installation dump in dual boot system by booting as Linux

You can recompile your kernel with NTFS support or install Captive NTFS to gain access to NTFS partitions.
 

4 more replies
Relevance 41%

I just bought a new hard drive and a brand new Windows 7 Home Premium 64bit disc and I am doing a clean install on the new hard drive. it seems that everything is going normal, but at a random time during the installation, the computer just shuts off. sometimes it doesn't even get to the installation when it shuts off. sometimes it shuts off in the middle of the "windows is loading files..." black screen. there are no beeps when it shuts off or when I turn it back on. there are also no error codes. whenever i turn it back on it simply acts as if it never tried to install windows and starts the boot all over from the disc. i have no idea what the problem is. Please help ASAP

Answer:Windows 7 Installation - Computer Shuts Off During Installation

Take a look at these posts:

Common Installation Problems and Their Solutions
Questions to use for help with Installation Issues
Tutorial quick reference list for Installing Windows 7
Questions to use for help with Installation Issues
Clean Install with a Upgrade Windows 7 Version
Clean Install Windows 7
USB Windows 7 Installation Key Drive - Create

Can you post your specs
Filling out System Specs

9 more replies
Relevance 39.36%

Hello,

Im very sorry I couldnt be as descriptive as possible in my tittle description, I will do so in full now.

Last night a storm caused the power to flicker and then go completely off and on for a few minutes. Now during the boot up process on my fathers computer, I get a prompt screen from windows telling that due to a incorrect shut down I should choose a method of booting; safe mode, safe mode with networking, start windows normally.. (you know the rest of the gib) If I tell windows to start normally, it gets to the final booting phase showing the small blue progress bar, but the computer resets itself.

It also will not go into safe mode, nor safe mode with command prompt, no kind of safe mode what so ever. Essentially, the computer gets right up the point of finally kicking 100% and then a reset which brings me back through the normal booting process and to the choose a method of boot screen.
 

Answer:Computer booting error, cant get a full boot, because computer keeps resetting itself

Did you try Last Known Good Configuration?
 

5 more replies
Relevance 39.36%

My Specs:CPU: Intel Core i5-3350P 3.1GHz Quad-Core Processor ($185.51 @ TigerDirect)Motherboard: MSI B75MA-P45 Micro ATX LGA1155 Motherboard ($169.99 @ Amazon)Memory: Corsair Vengeance 8GB (2 x 4GB) DDR3-1600 Memory ($87.55 @ Amazon)Storage: Samsung 840 Series 120GB 2.5" Solid State Drive ($131.45 @ SuperBiiz)Storage: Seagate Barracuda 1TB 3.5" 7200RPM Internal Hard Drive ($52.92 @ Amazon)Video Card: EVGA GeForce GTX 760 2GB Video CardCase: NZXT Source 210 Elite (White) ATX Mid Tower Case ($47.98 @ OutletPC)Power Supply: XFX 550W 80+ Bronze Certified ATX Power Supply ($49.99 @ NCIX US)Optical Drive: Lite-On iHAS124-04 DVD/CD Writer ($26.97 @ Newegg)Total: $752.36Also have a master cooler 212 evo. Had this computer for about 1 year (starting from July 2013) and had a problem where when I am playing games my computer would stutter (minor freezes like half a second), I also want to note that this problem occurred at the start of using this computer. Eventually, my computer would stutter so much, I had to restart my computer. After I bought an after market cooler (Master Cooler 212 Evo.) for my cpu, the problem minimizes to certain games (I can play games like League of Legends normally but not games like Counter Strike Global Offense or Battlefield 4, which are games that need a good computer which my computer can handle). So I was curious to see if it was the dust that was causing the problem, so I used compressed air to blow the dust away and now my computer starts t... Read more

Answer:Computer freezes (occurs after booting up computer & leaving it for 1-5 minutes)

Sound to me like your video card is overheating.  You mentioned the possibility of dust being a problem.  Does that mean you have significant dust buildup?  If you use compressed air in a dusty environment without using a vacuum at the same time to suck up the dust you just move it around a bit, which can cause more problems.-Mal

2 more replies
Relevance 38.54%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 10 Home, 64 bit
Processor: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz, Intel64 Family 6 Model 69 Stepping 1
Processor Count: 4
RAM: 16295 Mb
Graphics Card: Intel(R) HD Graphics Family, 1024 Mb
Hard Drives: C: Total - 703123 MB, Free - 570958 MB;
Motherboard: TOSHIBA, CA10SU
Antivirus: Windows Defender, Enabled

This has happened twice now. I'm not sure if this is related to the Digital Signature Error I get before booting up. That still hasn't been resolved. ?Windows cannot verify the digital signature for this file?, and it doesn't show a file. I can usually skip it and go on to the desktop.
Oh, I've been some WiFi disconnection issues. Not sure if this a Windows 10 problem or a my computer problem. I didn't have issues before (I can't remember what version the previous driver was).

The bugcheck has created a memory.dmp file and another minidump file. One is attached.

Any help is appreciated.

Thanks!
 

More replies
Relevance 38.13%

I want to remove Vista from my dual-boot because i dont like vista now.
 

Answer:Dont want Vista, Incomplete installation, Vista remains on dual-booting, WANT to remo

If you're dual-booting from XP then just put the CD in the drive and remove the Vista partition...
 

2 more replies
Relevance 36.9%

My Dad's laptop running Windows 7 crashed the other day, and after running Startup Repair, it found that compbatt.sys was corrupt. I tried copying over a good version from my pc & recovery partition but that only resulted in a blue screen.

Today, I attempted to do an upgrade installation of Windows 10 in order to preserve his files,etc.
We have a backup, but he's not 100% sure on it's content.

I was able to boot off of the Win 10 DVD and select Upgrade Installation, but then it stops, and a message pops up (paraphrasing here) that I need to boot into Windows 7 for it to proceed.

As I am unable to boot into Windows 7 due to the corrupt system file, I'm asking for a way to force Windows 10 to proceed with the Upgrade Installation WITHOUT having to boot into Windows 7.

I've prepared my Dad for the fact that we may need to do a clean install (7 or 10), and suggested we'd have to pull the HDD from his laptop and use my HDD cradle to scavenge for any files, but his laptop would take full disassembly (remove keyboard/etc) to get to the HDD.

Thanks for any help in allowing us to proceed with the Win 10 Upgrade Installation without having to boot into Win 7 which is corrupt. Googling hasn't given me any clue thus far.

Looking forward to people smarter than me helping me to a path forward without a loss of data and not having to take apart the laptop.

Answer:Windows 10 Upgrade Installation via DVD without booting into Windows 7

Did you try just Repair option ?

9 more replies
Relevance 36.9%

My Dad's laptop running Windows 7 crashed the other day, and after running Startup Repair, it found that compbatt.sys was corrupt. I tried copying over a good version from my pc & recovery partition but that only resulted in a blue screen.

Today, I attempted to do an upgrade installation of Windows 10 in order to preserve his files,etc.
We have a backup, but he's not 100% sure on it's content.

I was able to boot off of the Win 10 DVD and select Upgrade Installation, but then it stops, and a message pops up (paraphrasing here) that I need to boot into Windows 7 for it to proceed.

As I am unable to boot into Windows 7 due to the corrupt system file, I'm asking for a way to force Windows 10 to proceed with the Upgrade Installation WITHOUT having to boot into Windows 7.

I've prepared my Dad for the fact that we may need to do a clean install (7 or 10), and suggested we'd have to pull the HDD from his laptop and use my HDD cradle to scavenge for any files, but his laptop would take full disassembly (remove keyboard/etc) to get to the HDD.

Thanks for any help in allowing us to proceed with the Win 10 Upgrade Installation without having to boot into Win 7 which is corrupt. Googling hasn't given me any clue thus far.

Looking forward to people smarter than me helping me to a path forward without a loss of data and not having to take apart the laptop.

More replies
Relevance 36.9%

My Dad's laptop running Windows 7 crashed the other day, and after running Startup Repair, it found that compbatt.sys was corrupt. I tried copying over a good version from my pc & recovery partition but that only resulted in a blue screen.

Today, I attempted to do an upgrade installation of Windows 10 in order to preserve his files,etc.
We have a backup, but he's not 100% sure on it's content.

I was able to boot off of the Win 10 DVD and select Upgrade Installation, but then it stops, and a message pops up (paraphrasing here) that I need to boot into Windows 7 for it to proceed.

As I am unable to boot into Windows 7 due to the corrupt system file, I'm asking for a way to force Windows 10 to proceed with the Upgrade Installation WITHOUT having to boot into Windows 7.

I've prepared my Dad for the fact that we may need to do a clean install (7 or 10), and suggested we'd have to pull the HDD from his laptop and use my HDD cradle to scavenge for any files, but his laptop would take full disassembly (remove keyboard/etc) to get to the HDD.

Thanks for any help in allowing us to proceed with the Win 10 Upgrade Installation without having to boot into Win 7 which is corrupt. Googling hasn't given me any clue thus far.

Looking forward to people smarter than me helping me to a path forward without a loss of data and not having to take apart the laptop.

More replies
Relevance 36.49%

Hi there,
Last night i attempted to install PC Tools Firewall Plus Free Edition, however the installation froze and after 8 hours never came back. I then closed the installation...

It was only then that i noticed my internet connection had gone, so i ran the uninstaller for the firewall and it required a reboot... I was working on something on the net at the time and i needed to get my internet back to save what i was working on so i attempted to get my internet working myself. I am very good with computers (im sure you get that a lot, but i am actually a computer technician and have run out of ideas). in my attempts to get the internet back i did the following things:

Did a connection repair, didnt work.

attempted to remove the folder of pctools, didnt work there was still two files left - driver.exe which was not possible to terminate even using fileassasin and a logfile.

Stop, and set the pctools services to disable, didnt work...

I noticed that i couldnt stop the services, so i found where they were in the windows services folder and deleted the files, didnt work
I then went to bed, turning off the computer.
Today i come back to find that whenever i try to boot (safe mode or normal mode) it gets to the windows loading splash screen for about .5 seconds then reboots.
I have limited access to the computers files because i actually have a linux partition (Mint (i believe its helena/8)) so that may help.
The windows partition is XP Home SP2, and i have lost ... Read more

Answer:Computer not booting

Sorry to bump, however for some reason i am unable to click the edit button...

Just a quick update, i followed some tips on this site which said burn the recovery console iso to a disk then run the fixboot command... Now the pc doesnt even get to the operating select screen so i have 0 access to my computer... i get some errors that just ask me to press any key to reboot.
I believe that the system may be beyond repair so im trying to find my ubuntu disks to backup my important files then im going to see if the recovery option works (which will install vista, because that was what was originally on this machine before i bought and installed windows xp)
Ill be sure to carry ouit any advice given before i recover, and ic you can tell me how to reverse the fixboot command that would be grand.

Regards

5 more replies
Relevance 36.49%

Hi,I have an emachine pc, however it was slowing down with what I think was a virus, and eventually stopped running my computer etc.A friend tried restoring the comp using the 'emachines restore disk,' but as we didnt have disk 2 at the time, it was cancelled half way through.Now the comp shows the 'emachine startup screen' and a blank screen comes up with a flashing cursor.I am able to get into BIOS at the min, but that's all I can seem to get into.Has anyone got an idea of how to get the computer to get back onto some kind of menu etc. by using a downloading a boot disk or something?Many thanks,Tom

Answer:Computer not booting up

I would imagine that disk 1 has the windows install, disk 2 has all the drivers plus the free software.without the drivers windows will not start.Can you borrow a friends winxp cd and load windows using your licence no.

5 more replies
Relevance 36.49%

Hi and thanks in advance!

My computer is not booting. I use WindowsXP home. I can get to the Windows logo and the little blue bar going back and forth, but then the screen goes black, I hear the hard drive, running, and then it simply restarts all over again. I let it go for about 30 minutes doing that, and nothing ever happened. I can get into Safe Mode just fine, I can run AdAware and Hijackthis, but I dont know what to do to get it to boot correctly.

The problem started when I got a program called 'Bravesentry' , which I understand to be spyware. Unfortunately, while trying to remove it I restarted and thats when the problem started. I hadnt made any other changes or done anything important other than that, so Im pretty sure thats what it is.

I can make a Hijackthis log, but I dont know how to get it into the forums since my computer only boots in Safe Mode and I have no internet I have a second computer I can use for the forums, it was networked to the original computer. Any help would be most appreciated!

Thanks

Answer:Computer Not Booting, Help Please :(

Instead of Safe Mode, have you tried to login using "Last Known Good Configuration?" That often works if it's available.

3 more replies
Relevance 36.49%

I have to have a floppy in now to boot the computer. Suddenly after a restarted one day it said ntldr cannot be found so i was totally stuck. I found out that i could put this file on a floppy from another computer (i used my dads laptop). I did this and it loaded fine. Then i wanted to put the file and this other one it told me into where it should be. I plonked it in system 32 and that didnt work. Then i put it in i836 which is where i got it from on the laptop. I also created this boot.ini file but nothing seems to work. It is really annoying having to have the floppy in all the time. When it starts it says the BOOT.INI file is invalid then it says starting in windows c:/ how do i fix this.
 

Answer:Booting the computer

Hi,

Here is a possible solution. It may mess up some of your drivers or it may not. Anyway, if you want a solution, this is the standard one:

You can boot to the XP cd and when you see the "Welcome to setup" message, press the letter R.
You will then get a DOS prompt.
Then type: chkdsk /p [enter]
When that is done type: fixboot [enter]
Type: Y at the next prompt [enter]
Then type: exit [enter]
The system will now reboot into Windows.

If for some reason that didn't work, you can boot to the recovery console (example above).
Type: "chkdsk /r" [enter]
When done type: exit [enter].
This takes a bit longer, but the system should boot back into Windows.
 

1 more replies
Relevance 36.49%

Everytime I boot up my computer it comes up with this error "Error loading: w1dfb6c3.dll The specified module could not be found"When i used HijackThis it came up again. My full logfile is here: logfileO4 - HKLM\..\Run: [rpg34c02] RUNDLL32.EXE w1dfb6c3.dll,n 00334bff000000021dfb6c3Any help is greatly appreciated.

Answer:Booting Up The Computer

Hi Phoenix00,

I see that you have posted you log to the HJT forum. Please wait until someone responds to your HJT post before you do anything. Any changes you do here may cause confusions in the handling of your log. One last word... please be patient with that team. They are volunteers that handle a major workload of logs.

Good luck!

rigel

1 more replies
Relevance 36.49%

Just finished throwing together my new comp this morning, when I turned it on to check all the fans and such were connected but without attaching it to a monitor. I powered it off, and then hit the power button again shortly after and nothing happened. No beeps, no fans, nothing. The green light on the motherboard is on and the power supply seems to be function, as the wattage readout on the front is on. Any help would be greatly appreciated.

Here are the specs if it helps:
Intel prescott 550 (3.4 ghz)
Intel 915PBL mobo
2 80gb hitatchi deathstars
Chaintech 6600 GT
Lite-on double layer dvd-rw
Thermaltake TWV480 power supply
1GB (2x512) Geil DDR2 533
Thermaltake Tower 114 CPU cooler

-DocOwnage
 

Answer:New computer not booting

Sounds like you have the leads from the case in the wrong spots
(power led- Reset- Hdd- Spkr-) ect.

Look in your mobo manual to see where the leads should go- and look at the ends of the leads themselves- they should be clearly marked. Diff mobos will specify diff ways to insert leads to ensure proper ground and polarity among other variables.

Ugh this brings back nightmares for me - as im sure a lot of other ppl lol
 

6 more replies
Relevance 36.49%

Hi, i wanted to over clock my cpu and i had a pohoenix award bios, it had OC features locked so i used a software called CLockGen.
I have athlon 64 3500+ venice. it was at 2.2ghz
I over clocked to 2.6ghz and the computer froze..
I shut the computer down.
Then it wont boot back up.no display, no beeps..
i tried taking ram sticks out to see if it beeps after still no beeps.
i tried differnet ram sticks and still no beep.
I treid reset bios from battery and no luck either..

What can i do?
Please help, i cant tell my parents i killed my computer becuase of trying to make a game work, please help me if you can
Thanks
 

Answer:Computer not booting

12 more replies
Relevance 36.49%

I just changed the graphics card, (back to my Sapphire 2600xt ) because there has always been a problem with my other. My computer will not boot now. I press the power button and it lights up (PSU has a LED) for about 1 second (literally) and dies. I think its the power supply going out, because I've read reviews on it and they said its terrible, and lasts about one year(as long as I've had this build). Its a logisys PS550AC. Sorry if I left out any details. Try to get back to me asap if possible, thanks
 

Answer:Computer not booting

16 more replies
Relevance 36.49%

I'm am running NT 4.0 on an a Pentium III 500 mhz computer w/ 128 MB of RAM. The motherboard is by American Megatrends.

Last night, computer blue screened twice. (physical memory dump, exception not handled, etc) I rebooted, and after the 2nd rebooting, I noticed that the memory ha dropped from 128 MB to 76 (or 74) MB. It then froze after I logged in to NT, so I turned it off and left it off.

The next day, I went to turn on the computer. The LEDs go on, and I can hear the whirring of the hard drives. No Beeps from the motherboard, and nothing appears on my monitor.

1. The monitor works, I checked.
2. I tried switching around the RAM. no change
3. Tried booting w/ no RAM. no change
4. Tried only one or the other stick of RAM in the motherboard, swiching around which slot it was in. still nothing.

Any thoughts on what it is? Dead motherboard or bad RAM? Or none of the above?
 

Answer:Computer not booting

9 more replies