Computer Support Forum

Typo error

Question: Typo error

Sorry.... 22%

More replies
Relevance 100%
Preferred Solution: Typo error

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 59.04%

Just got a news system built and am getting a CTL.dll error whenever I turn on my HDMI display ...not sure what is doing it.... I have attached the dump file as a is greatly appreciated.

Windows 7 64 bit Ultimate retail
All new hardware
OS build Service Pack 1 less than a month

I have attached my dump file and the system file checker results and any help is appreciatted... one thing to note is the system file checker results I get a
Could not reproject corrupted file [ml:60{30},l:58{29}]"\??\C:\Windows\SysWOW64\en-US"\[l:28{14}]"iassdo.dll.mui"; source file in store is also corrupted

Thank you for your help


Quote: Originally Posted by etanas

Just got a news system built and am getting a CTL.dll error whenever I turn on my HDMI display ...not sure what is doing it.... I have attached the dump file as a is greatly appreciated.

Windows 7 64 bit Ultimate retail
All new hardware
OS build Service Pack 1 less than a month

I have attached my dump file and the system file checker results and any help is appreciatted... one thing to note is the system file checker results I get a
Could not reproject corrupted file [ml:60{30},l:58{29}]"\??\C:\Windows\SysWOW64\en-US"\[l:28{14}]"iassdo.dll.mui"; source file in store is also corrupted

Thank you for your help

Memory corruption caused by an unknown driver. Please run memtest and driver verifier.

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup ... Read more

8 more replies
Relevance 59.04%

I installed Adobe 8 and now all of my Desktop icons have the Adobe logo and will only open up Adobe, not my usual shortcuts, like word, excel, games etc...I tried uninstalling Adobe, which fixed the problem, but when I re-installed it came back again. I don't knw how to fix this...I'm new to all this! I'm running windows vista Help!

Answer:Adobe error {fixed typo}

I'm not sure why that is happening but you can try and fix the icons by right clicking on the programs that are displaying the incorrect icons, select properties>change Icon and find the correct one

3 more replies
Relevance 46.74%
Question: Is this a typo?

the help infomation about bitlocker on windows 7 ultimate, i found this while reading through it, correct me if im wrong but its meant to be you right?

Answer:Is this a typo?

Quote: Originally Posted by F1FAN

the help infomation about bitlocker on windows 7 ultimate, i found this while reading through it, correct me if im wrong but its meant to be you right?

You have found one

1 more replies
Relevance 46.74%
Question: typo

For my typo read "explanatory". What am I up to?



3 more replies
Relevance 46.33%

Okay helping a friend via long distance phone calls and the random email. This is the only info I have, if someone could shed some light on this and help, we both would appreciate it. Here is the email she was able to send:

"Still messing with that damn trojan. AVG sees it and asks the usual, delete, heal, or move to vault. No matter how many times I choose delete, or heal or even move, it comes back again and again. This is what was causing my IE to try and dial out (at least, that's what I get from looking online for info on this damned thing) and share my info with the hacker. Avast does not seem to see...this file. It is saving itself (and apparently restoring itself) in my Windows folder as a dll file. prntsvr.dll to be exact.

The name AVG gives is PSW.Dumarin.C. The last thing I tried was to turn my
system restore off, delete the file and re-start... but guess what? lol, Yep, it is still there. *sigh* Why do people have to make these things???"

------------end of message--------------
Looking around for info I found only ONE place (so far) that had any info about it, and that is assuming she misspelled the name of the thing...

Name: [email protected]
Aliases: W32.Dumaru.B/C | [email protected] | W32/Dumaru-B

I think she mis-spelled the name, because Google found nothing about her original file name..

I found info here:

And a free removal tool here, which I've... Read more

Answer:PSW.Dumarin.C (possible typo)

16 more replies
Relevance 46.33%
Question: Password Typo

I only have 1 password for all my docs but I have 4 of them which I can't open. Propably a typo when I saved these docs.

They are in OpenOffice writer format

Anyway for a back door?


Answer:Password Typo

Please refer to the forum rules. We cannot assisst with password issues so I have to close this thread.

Passwords - Please do not ask for assistance with forgotten passwords and/or bypassing them. As there is no way to verify the actual situation and/or intentions, no assistance will be provided and any such threads will be closed.

1 more replies
Relevance 46.33%

A few people have commented on the typing / grammar used in the forum, just for a bit of fun I thought you might like to read this:Aoccdrnig to a rscheearch at an Elingsh uinervtisy, it deosn't mttaer in > > waht oredr the ltteers in a wrod are, the olny iprmoetnt tihng is taht > > frist and lsat ltteer is at the rghit pclae. The rset can be a toatl mses > > and you can sitll raed it wouthit porbelm. Tihs is bcuseae we do not raed > > ervey lteter by it slef but the wrod as a wlohe

Answer:On the subject of typo's

looks normal to me:-)

10 more replies
Relevance 46.33%

I mistyped a url earlier (I believe i typed 'radiosahck' instead of radioshack) and was redirected to a strange website (something about internet surveys I believe) I closed it right away and did a quick scan with malwarebytes to make sure nothing was wrong, and it came up empty. I'm probably being a bit paranoid here, but is this anything to really worry about?

Answer:Odd URL typo redirect...

Redirects can be something to worry about, as you have no idea what content is being hosted on the re-direct. Most popular anti virus programs, have real-time scanning, where it's constantly scanning your computer, and as soon as you're redirected to a bad website, it will block any content that's harmful to your computer. I use Eset and it does this.

1 more replies
Relevance 46.33%
Question: Microsoft Typo

Microsoft made a typo in their WinSAT application, How can we let them know about it?

Answer:Microsoft Typo

Hi Steven,

You can try contacting them by following the link below. Whether or not you will get a response I cannot say. I have managed to locate the error in the 'WinSAT.exe' file (notice the space between the letters), and you can edit it to replace the erroneous 'o' with an 'i', however by doing so you will probably cause it to fail an SFC scan. In my opinion, it is such a minor error that it is probably best left ignored.

6 more replies
Relevance 45.92%

I was trying out a freeware security suite and i encountered this typo that might make you laugh or not

Answer:security suite typo

Looks like an application I would have been involved with judging by the typo! dependant on where the app was developed it depends on the native language and who translated it possibily as I noticed many strange word in manuals translated to engwish over the years.

BTW what is the app you trying "swift"???

5 more replies
Relevance 45.92%

Is there any way I can report this?

This is just my first post and I'm tryna help out a bit

Answer:I just found a typo in Windows 10 TP

skippr said:

Is there any way I can report this?

This is just my first post and I'm tryna help out a bit

Hey skippr, welcome to TenForums!
Try the Feedback App.
What'd ya find?

11 more replies
Relevance 45.92%
Question: typo on home page

The current Maxthon is
You have 3.1.3.xxxx
just ab fyi. the download is right 314. just not the home page listing.:wave

More replies
Relevance 45.92%

So I was browsing around in Windows Defender (Windows Settings > Update & Security > Windows Defender > Open Windows Defender Security Center > Virus & threat protection > Virus & threat protection settings, then scroll down to Controlled folder access.)

The sentence "Protect your files and folders from unauthorized changed by unfriendly applications" has a typo in it.
(Refer to the attached picture)

? The word "changed" has a typo in it and should be the word "changes" (with an 's' instead of a 'd'), or
? There is at least one missing word in between the words "unauthorized" & "changed"
Somebody should inform Microsoft about this typo.

But Also: I noticed that this is a new option, since the last time I was browsing around in there. What does this option exactly do? It was originally off, but I turned it On. Yet I must say that I have seen a few messages pop up in the right corner of the screen, stating that Windows Defender blocked some programs from making changes. One of them showed explorer.exe from modifying the Favorites folder without me doing anything with Favorites. Exactly what does this option do? Is it kind of like some sort of strict "Firewall"? Because if so, then I like that.

Answer:HAH, I Found A Typo In Windows!

Originally Posted by pepanee

The sentence "Protect your files and folders from unauthorized changed by unfriendly applications" has a typo in it. ...

Mine says 'unauthorised' (but then it should in the UK) - still has the typo though

But Also: I noticed that this is a new option, since the last time I was browsing around in there. What does this option exactly do?

Blocks access to your files and documents by unknown apps (malware/ransomware). It's off by default because not all 'good' apps are in it's 'trusted' list. It takes a bit of fiddling to get all your apps to work after you turn it on.

Change Windows Defender Controlled Folder Access Settings - Windows 10

4 more replies
Relevance 45.92%

Hello everyone,

I am experiencing the red typo lines when there are no typos. This happens on occasion when I'm typing emails and posting or responding to forums. It seems to occur when there is an actually typo and I correct the error. After that the entire post/email from that point on will have the red typo lines.

For example it is happening now... I'll try to post a pic for a better understanding.

Has anyone experience this as well and most importantly does anyone know of a solutions to this?

My unit is new and I have yet to DL Office 365 so I don't have Word. Not sure if that will matter.

Any input is greatly appreciated. Thanks

Answer:Red typo lines when no typos

Language settings?

8 more replies
Relevance 45.92%
Question: Typo in Event 8003

Apparently, this bug (typo) was not fixed for several years!!! Still it read "bowser" instead of "browser". I see this in 64-bit Windows 7/Computer Management/Event Viewer/Windows Logs/SystemLevel "Error", Source "bowser", General "Log Name:      SystemSource:        bowserDate:          3/11/2010 2:07:25 PMEvent ID:      8003Task Category: NoneLevel:         ErrorKeywords:      ClassicUser:          N/AComputer:      NORMAN-CPDescription:The master browser has received a server announcement from the computer MEDIACENTER that believes that it is the master browser for the domain on transport NetBT_Tcpip_{7D3A7E95-23A7-42BA-B071-81703C4348F5}. The master browser is stopping or an election is being forced.Event Xml:<Event xmlns="">  <System>    <Provider Name="bowser" />    <EventID Qualifiers="49152">8003</EventID>    <Level>2</Level>    <Task>0</Task>    <Keywords>0x80000000000000</Keywords>    <TimeCreated SystemTime="2010-... Read more

Answer:Typo in Event 8003

Hi,I think the following website explains the story:

3 more replies
Relevance 45.92%

Hi can someone please help clear up my concerns because I accidentally interned the wrong DNS address on my new router.
After entering this typo I almost immediately that my connection was unstable especially on Linux and yesterday evening when I logged back into my router the DNS settings were set to there defaults. But I was able to surf the web kinda in Windows though it timed out often and certain webpages wouldn't even open, and now when ever I enter the correct DNS settings it disconnects from the internet.  
Here's what I entered
Instead of
I'm really feeling uneasy and stressed about this, any advice?
Why does stuff like this happen whenever your in poor health or any other of life's trials and complications?

Answer:Open DNS typo on router

Two things you might check:
1. In Windows, do your Network Properties have a DNS Server entry(s) that point(s) to your router (probably or close) or do they point to the published OpenDNS IP addresses? Easy check: From an Elevated Command Prompt: ipconfig /all
2. After you corrected the DNS router entries, did you have the router do a cold reboot?
I believe you shouldn't overly stress yourself over this if you didn't make any financial transactions. But new passwords could be needed.

6 more replies
Relevance 45.92%

OneDrive has over 7x that amount buy giving everyone that uses it 15GB.

More replies
Relevance 45.1%

I think this is a virus behavior. Recently whenever I type in microsoft waord or notepad or fill up webforms in IE, the cursor jumps anywhere in the previous sentences, or highlights the last some letters somewhere and the entire type goes haywaire. Now Also this is getting typed anywhere and I have to delete, retype. very painful. I have Norton antivirus 2005, zerospyware (after reading the latest article in your mag only), adware, spybot and zone alarm, all fully updated. and none have been able to pick up a virus/spyware after a thorough system scan. I am going crazy typing, especially when i am prescribing medicines to my patients. I don't want to reload windows and all my applications again.Pl HelpDr Alok Modi MD

Answer:Typo errors due to cursor jumping

Go into Device Manager and uninstall your Mouse then restart computer

10 more replies
Relevance 45.1%

My correct email address is logged with my Microsoft account, but typo is showing on my windows phone Microsoft account under email+accounts, message says attention required.  Click on message tried to correct using 'fix it here' then get message
There's a temporary problem, getting this message for 2 days now.  Help

More replies
Relevance 45.1%

Hi... I wasn't exactly sure where to post this, I'm posting it both here and in the linux forum

I accidentally made an ext2 filesystem (mke2fs) on top of my pre-existing Windows XP partition (accidentally typed /dev/sdb1 instead of /dev/sda1)... so now it won't boot, and I can't seem to mount it on any OS. Anyone have any ideas on how data on it could be recovered, or if there's any way to get it working again as-is?

Answer:ext2 + typo = dead WinXP

Pull the drive and put it into an External USB Enclosure/Adpater. Mount it on a working computer and copy the files you want.

2 more replies
Relevance 45.1%

I have a Dell XS 15z Laptop
I am getting a windows 10 Recovery Message ( your PC couldn't start correctly )
I am attemting to create and use a recovery USB using the link below.
Everything seems to work except I don't have the "Secure Boot" option in my Bios.
Anytime I try to boot the USB I get the message:
Operation System not found

Please advise.

Answer:Operation System Not Found ( not a typo )

Are you creating the recovery USB on a different PC?
I hope so.

1 more replies
Relevance 45.1%

I'm just setting up a new computer, and not used to the keyboard. When I was installing the operating system I was asked for a User name. Before I had a chance to do anything it had accepted the name GREU and moved on to the next step. No back button! Bloody i7's, so fast!

I've tried doing a search in regedit for GREU, changed it in one place, but its still showing up all over. Is there a complete fix to this or should I resign myself to being known as Greu for the next few years?

Answer:Typo when entering user name - I'm now Greu!

6 more replies
Relevance 45.1%

for your information:

Spyware authors and phishing fraudsters yanked an old scam out of the playbook Wednesday by directing malicious code at Internet users who may be prone to typing or spelling deficiencies, according to security researchers.

Finnish security firm F-Secure said they discovered an attack aimed at Web surfers attempting to land on Google's (Quote, Chart) homepage, but who may have mistyped the Web address.

Internet users who punch in "" are treated to a host malicious code, as the computer gets slammed with a heap of the unwanted software that is automatically downloaded and installed. The malware includes: Trojan droppers, Trojan downloaders, backdoors, a proxy Trojan and a spying Trojan. A few adware-related files are also installed, the firm said.

Google Typo Crashes Systems

More replies
Relevance 45.1%

NAME: Googkle


F-Secure staff has found a malicious website that utilizes a spelling error when typing the name of the popular search engine - ''. If a user opens a malicious website, his/her computer gets hijacked - a lot of different malware gets automatically downloaded and installed: trojan droppers, trojan downloaders, backdoors, a proxy trojan and a spying trojan. Also a few adware-related files are installed.

The name of the malicious website is ''. PLEASE DO NOT GO TO THIS WEBSITE! Otherwise your computer will get infected! We have reported the case to the authorities.

Detailed Description

Our investigation revealed that the whole infection starts from the '' website. This website, as well as a few related websites are owned by people with Russian names. Also several malicious files that are downloaded from these websites have Russian texts.

When the '' is opened in a browser, it shows 2 popup windows that are linked to the following websites:


The '' website downloads and runs the 'pop.chm' file and the '' website downloads and runs the 'ddfs.chm' file. Both files are downloaded using exploits and they contain exploits themselves to run embedded executable files. One of the webpages of the ' Read more

More replies
Relevance 45.1%


I am having a problem when i misspell URLs.

When i type things like google.con instead of .com, i am redirected to a host of different search sites, including, and I am pretty sure i must be infected with something, but i have ran several online and offline spyware and malware scanners and nothing seems to find a problem.

I am running Firefox version, but the problem also occurs in IE as well.

Advise please!



Edit: I seem to have found what i think is the culprit for this...but this leads to another problem.

There is a HJT entry stating
O17 - HKLM\System\CCS\Services\Tcpip\..\{A2EA3617-0DD4-4C7B-89EC-1F1FB24D96E1}: NameServer =

I have removed this on a couple of occasions and it only returns a few minutes later.

Help please!!!

Answer:Solved: Typo browser hijacks

16 more replies
Relevance 45.1%

Purchased a new laptop and skipped making the MS email but created a password for my account.When I booted up my pc later on I was greeted with an incorrect password message. I must have made a typo in the pw set up because it does not work.I also didnt create a recovery disk because I had literally only used it for 30 mins before turning it off and this problem was the last thing I ever expected to happen.There is only one account and it's the one that is locked. A to rendered a $600 purchase obsolete until I can fix it.All help is appreciated.

More replies
Relevance 44.69%

Heads up about a string of blogs using familiar names like FileHippo and Softpedia in their URL, when searching for software downloads. I cannot guarantee their legitimacy, or safety to visit or download from these rip-off blogs.

Searching "avast 2017" in Google Search Engine crops up with many blogs using SEO techniques to distract users from the real FileHippo and Softpedia sites.





Happy Safe Browsing!

Answer:Typo Squatting - Fake FileHippo, Softpedia and more!

Download links seem legit.. I love the tactic by the way.
I will take lol

0 more replies
Relevance 44.28%

Is there a way to tell Microsoft Word to "guess" what I mean every time I make a typo? For example, I type "tsanding," and instead of changing it to "standing," it underlines it red. I know I can then right-click it, and select AutoCorrect > standing, so that, from now on, if the same exact typo arises in the future, in which I accidentally type "tsanding," it'll change it to "standing." I've thus far collected *hundreds* of specific typo corrections in this way. But that's very time-consuming, and is only a weak attempt at preventing typos I may be likely to make in the future (based on the fact that I made the exact typo at least once before). Is there any way to establish that I want Microsoft Word to go ahead and correct every single "underlined red" occurrence from now on, based on its best guess as to what I meant? (except in cases where the typo was so bad that it has no guess at all) That way, when it corrects something I *didn't* want corrected, I can then go back and add what I wanted to its dictionary, to tell it not to consider that word an accident from then on.

Answer:Is there a way to tell Microsoft Word to "guess" what I mean every time I make a typo?

Found this in the Word Help files. On the Tools menu, click AutoCorrect Options. In the Replace box, type a word or phrase that you often mistype or misspell ? for example, type usualy. In the With box, type the correct spelling of the word ? for example, type usually. Click Add. Is this what you're talking about?

2 more replies
Relevance 44.28%

Hello, is some one know where finding free Helvetica and Time family typo ?
thank Kidkodak 57

Answer:Finding free Helvetica and Time family typo

Helvetica Fonts - DownloadFontsFree.Net
Regarding "Time family", you need to be more specific.

2 more replies
Relevance 43.87%

So I decided to buy Windows 7 from eBay. I didn't trust the people selling product keys only, so I purchased a brand new retail package. When I shop on eBay, I always look for sellers that are really close to me so shipping is fast. So I found a seller, said to be located in Maryland (which is two states away from me), with a great price and great feedback for his W7 sells. I was pissed because when the guy sent me the tracking number, I found out that the item was coming from Beijing, China, not Maryland! But I figured, well at least he shipped it.

THEN, I get an email from eBay saying the listing for the item I just purchased because the copyright holder reported that the item may be a counterfeit. At first I was pissed at eBay because now I had to record of the transaction in my eBay account and could not contact the seller directly from within the item invoice, since eBay deleted. Plus, he had several other sells of this same item, all with positive feedback of the W7 package, and eBay did not remove the listings for them. So I was like, why me? Luckily, I had his email from paypal and contacted him. He assured me that he is the legal owner of the item and that he sent proof to eBay saying so. Still never got my records back.

Anyway, this prompted me to search counterfeit Windows 7 retail packages. I found some interesting info, but my package doesn't fit any of the counterfeit profiles Microsoft says to look out for. The top hologram is built onto the ... Read more

Answer:My Windows 7 copy looks fake. Typo on back cover. Came from China.

Have you tried contacting ebay?:

eBay Buyer Protection


9 more replies
Relevance 43.46%

When I first open Google, in the Search Box is a typo which I cannot delete.Any ideas? Many thanks. pianojoe

Answer:Solved: how to delete typo which remains in Google search box when I first open Googl

6 more replies
Relevance 43.05%

So I decided to buy Windows 7 from eBay. I didn't trust the people selling product keys only, so I purchased a brand new retail package. When I shop on eBay, I always look for sellers that are really close to me so shipping is fast. So I found a seller, said to be located in Maryland (which is two states away from me), with a great price and great feedback for his W7 sells. I was pissed because when the guy sent me the tracking number, I found out that the item was coming from Beijing, China, not Maryland! But I figured, well at least he shipped it.

THEN, I get an email from eBay saying the listing for the item I just purchased because the copyright holder reported that the item may be a counterfeit. At first I was pissed at eBay because now I had to record of the transaction in my eBay account and could not contact the seller directly from within the item invoice, since eBay deleted. Plus, he had several other sells of this same item, all with positive feedback of the W7 package, and eBay did not remove the listings for them. So I was like, why me? Luckily, I had his email from paypal and contacted him. He assured me that he is the legal owner of the item and that he sent proof to eBay saying so. Still never got my records back.

Anyway, this prompted me to search counterfeit Windows 7 retail packages. I found some interesting info, but my package doesn't fit any of the counterfeit profiles Microsoft says to look out for. The top hologram is built onto the cds, no... Read more

Answer:My Windows 7 copy looks counterfeit. Typo on back cover. Came from China (eBay). Pics

It's fake, that's pretty obvious. The hologram thing is most likely a sticker on top of the actual disc surface - you can use a fingernail or razor blade at the very edge and lift it up a bit, that's 100% proof. The part numbers don't seem to match up with the actual Windows 7 Ultimate part number, and it just has a fake quality all the way around.

If you contact Microsoft, show them the pics, explain where you bought it from and your situation, there is a small - small but it exists - chance they'll provide you with a key just for making the report and identifying the seller you got it from.

No guarantees, but at the moment you're better off reporting it to them and going from there. Sure can't hurt to let them know, either way.

I'd report it, personally, without even really thinking about it. It just SCREAMS fake.

38 more replies
Relevance 26.65%

Try this link:

More replies
Relevance 24.19%

The URL of a shared folder on the LAN,  copied into Windows Explorer address bar produces the Network Error in the above title.
Network Error: WIndows cannot access
\\\MySharedFolder   Error Code: 0x8004005 - Unspecified error.
But from a Dos terminal, Windows Explorer can open the same location just fine.  From DOS terminal:

More replies
Relevance 24.19%

I'm running Windows 7 Pro on my Dell laptop. This laptop has been in storage and hasn't been turned on in a year. Originally, all I wanted to do was use iTunes. The problem:
It made me update it in order to use it, but I got an error.
I un-installed it and tried downloading a fresh copy and I get the following error:
After some Googling, I read that not having the latest Windows .NET framework might be the problem. Sounded reasonable so I fired up Windows Update but that gave me an error and wouldn't start checking for updates.
I managed to get it to check for updates, but now when it starts the process, I get the following:
I Googled the error code "8007007E" and tried a few things to try and fix it.
I downloaded the windowsupdatediagnostic.diagcab, found on Microsoft's site, here:
I tried resetting the Windows Update reset tool, using "MicrosoftFixit50202", found here:
I download the system readiness tool, found here:
I tried a clean boot.
I tried renaming the Windows Update Softwaredistribution folder.
None of this worked.
I ran the System File Checker tool (SFC.exe) and the results said I had bad files, but I don't know how to fix them. It generated a CBS log, which is too large for me to post (10MB) , so I've uploaded to dropbox,... Read more

Answer:Windows update error.. System File Checker integrity error..iTunes install error

Open the Command Prompt, copy and paste the commands below one at a time followed by pressing Enter after each command.
net stop wuauserv
rmdir /s %windir%\softwaredistribution\wuredir
net start wuauserv

9 more replies
Relevance 24.19%

I had a very bizarre problem today. I downloaded about 50 .mpg files and put them into a folder on my desktop. I opened one of them, and it worked fine, but after that every time I even opened the folder that the files were in, only half of the thumbnails would appear and then it would tell me that I had a Visual C++ Runtime Error, from explorer.exe aborting. At the same time as this, windows would pop up a little message saying that my virtual memory was low. Later, it popped up a message saying that my Media Player needed to be reinstalled and that my Norton Antivirus needed to be reinstalled. Then it disabled my Norton Firewall and my Norton Antivirus. Lastly, I started getting error messages telling me that my soundcard needed to be configured to handle voice files, by enabling hardware acceleration. The only problem with that was that Windows would not let me access the advanced sound settings!

I am running Windows XP (all patches up to date), 256 MB Ram, 75 Gig HD - so I figured the "low" virtual memory had to be an error. I tried tripling the virual memory to 1GB and also tried letting Windows automatically set the virtual memory size, but neither of these fixed the problem. My immediate thought was that it was a virus or trojan, but Norton VirusScan, Swat-It Trojan Scanner, and System Suite VirusScan all failed to detect anything, and all of them have their definitions up to date.

I ran a Google search to see what other things I should try and none of the... Read more

More replies
Relevance 24.19%

i have not been able to solve this one for a particular user.

skydrive pro stopped syncing. it produces the error in the title. i did some googling and followed a few fixes with no luck. due to some other office issues, i wiped his machine and reinstalled windows. with a fresh install of windows and office 365 he is still getting the error when syncing skydrive.

does anyone have any idea how to fix this?

Answer:Error code=0x80004005; Error source=Groove __ Microsoft SkyDrive Pro Error

1. Clear all browsing history on IE
2. Stop syncing all Skydrive Pro folders (have the remaining folders moved away from the original location to avoid duplicate renamed folders)
3. Run IE as administrator and resync the libraries normally

Those are the only instructions I found that made sense.

3 more replies
Relevance 23.78%

Ive just bought some new memory (TWIN2X4096-8500C5C G), the new memory doesnt seem to work unless I only add one stick, and even with that I get blue screen errors.

So from reading a few pages on teh internet I put my old memory back in, and ran windows driver verifier. Upon restarting I got and keep getting teh following BSOD.

IO SYSTEM VERIFICATION ERROR in wmiacpi.sys (WDM driver error 20e)

[wmiacpi.sys+152f at B7C5C52F]

Answer:Blue Screen IO Error. Verification Error In Wmiacpi.sys (WMD Driver Error 20e)

If the system ran fine...before you added RAM...then you need to see if the new RAM (by itself) new RAM may not be compatible with your old RAM, in which case the system will run fine with one or the other...but not both.The Driver Verifier tool is tricky to use, I would disregard that effort...for the moment.Remove your old RAM...put the new RAM in...see if the system works properly.FWIW:

14 more replies
Relevance 23.78%

The error onpage of Dell Start Page Trying to edit weather and the error message shows up. the error message is as follow: Line 2 Chasr 316 Error "HTML" is null osr not an object Code O URL HTTP:www Would you send me an e-mail with the answer, please.

More replies
Relevance 23.78%

Hi Everyone:
Can you help me with this issue please?
I am building a database in Access 2007, windows7, it works perfectly well on my computer where i am building it; but one feature doesn't work on another computer that also has the OP system and Access version.
when you're working in one form with one record, you click on a button that will open another form and filter the records to show only the profile of the same person. the error message it gives is: Run-time error '3000 ': Reserved Error (-3201); there is no message for this error.
i will show below the code where it debugs. I'd appreciate any help with that.
(Again: it works well on my computer, but gives that message on another computer)

Private Sub Find_in_Bio_Click()
Application.DoCmd.OpenForm "Staff_BioEntry", , , "((([Staff_BioEntry].[Full Name]=""" & [Form_Staff_Activities].[Full Name] & """) AND ([Staff_BioEntry].[DOB]= #" & [Form_Staff_Activities].[DOB] & "#))) AND ([Staff_BioEntry].[Registrant_Type] =""" & [Form_Staff_Activities].[Registrant_Type] & """)"
End Sub

More replies
Relevance 23.78%

I am getting a blue screen after I attempt to login to a pc.

Verification error in wmiacpi.sys (WMD driver error) 20e

wmiacpsi.sys = 152f at B9BAB852F

I have run the Dell diagnostic and everything passed.
This is a Dell laptop latitude D531. Dell just replaced the hard drive about 10 days ago. It worked fine until Monday.

Any any what this may be?

Answer:Blue Screen Io Error. Verification Error In Wmiacpi.sys (wmd Driver Error) 20e

Are you sure of the spelling of the 2nd file name? If so, Google doesn't give any results for it - which is suspicious.The first file name ( wmiacpi.sys ) is a Windows file that's used to help manage the ACPI settings in your system. BSOD error will usually point to the file that the error occured in, but this may not be the source of the error. Here's a link on how to find more info about the BSOD message: you locate the .dmp files for the event, you can use this link to generate an analysis of the dump for us to have a look at ( )

6 more replies
Relevance 23.37%

I have got error 0x8007371 when I tried to install .netframework 3.5 which was required to install windows essentials.
I ran DISM command to fix 0x80073712 error, and received another error message in the command prompt: Error 14098 Component store has been corrupted.
THen I ran sfc/scannow which gave another error "An error occured during installation of assembly component".
This is such a bul grab, can someone help

More replies
Relevance 23.37%

Hey guys, having trouble getting XP to Update, well it did Update MSRT and failed on Flash as usual because I removed Flash.  The only thing I can think of that I changed was my Router settings to more aggressive, but it has not affected Windows 7?
This is the ms document on it:
I tried all the stuff they say there but none works.  I have SP3.
I am also being sent to this site, which don't look like it should.
Thanks pcpunk

Answer:HTTP Error 500 - Internal Server Error, Error 0x8ddd0010

All good now!

1 more replies
Relevance 23.37%

Hello there. I have been redirected here by jamanji, whom has been most helpful by the way.
My PC crashed a little over a week ago.
Rather than retype everything, I would like to give you the link to my post.
I am not 'Tech' per se, but I would like to try and resolve my problem myself,
To make a long story short... I had error 0xc000000f. I have 2 threads on the subject, but the first thread was useless.( I think)
I read gregrocker's tutorial.
I made a Kaspersky Disc. I have a Pop Up from Kaspersky.
saying if I continue...........

Here are the links.

confused by what type of disc to use

Error 0xc000000f

If you read this...Thank you for your time.

Answer:Burnt out from error error error! Time to go back to Paper.

Ok mate one thing straight up the Kaspersky only requires a CD you can use a DVD but seriously a waste of useable space. Have been using Kaspersky security and tis rescue disk for years now so just the CD mate.

Just follow the prompts when you run the disk. It will boot (of course) but will not need Windows to do anything.

There are other options -

Bootable AntiVirus Rescue CD for Windows: Free Download any are good and again do not require Wndows to run.

If you can get it going then I would try this < the top scanner TDSS Killer

9 more replies
Relevance 22.55%

Ok so my first problem was what I thought the sasser worm. I researched it online and I can't find any traces of it anywhere now. I ran a few spyware checkers and stuff and I think I may have messed with some registries.

Now I cannot access the internet and heaps of things are stuffing up. I disconnected my internet and upon startup get this.

A "Data Execution Prevention" window that closes "Generic Host Process for Win32 Services".

I press OK and that goes away. I found some suggestions online but none of them seem to work. That's my first problem.

My computer runs fine until I connect my internet. It runs alright for a minute or two before I get this error.

The instruction at "0x00401000" referenced memory at "0x00401000". The memory could not be "written". Which has recently been appearing at the same time as AVG saying a threat has been detected at "C:\WINDOWS\drivers\atimixx8.sys"

After this has come up I can press OK to terminate the stop error, or cancel to debug. Either one does nothing but stops my internet from working, and the internet on other computers in my house (we are all on a network). When I try to heal/move to vault/delete the AVG threat, it says I don't have permission.

I've thought about just formatting, but I have seen people who say that even with a format, the problem still persists.

Please help!

More replies
Relevance 22.55%

Just got a new computer and am trying to install my Philips Mini HiFi sytem. Contacted their support centre and they don't know what to do! The stereo system simply plugs into a usb port and plays your audio through their system. The only difference between the system it worked on a few days ago and now is that I am running Windows Professional x64.

The problem:

three things to install:

1. the Philips drivers. Philips support got me to download their drivers for Win XP.

When I install this the error rec'd is: "Install 2.15 setup. While installing drivers Plug and Play error detected. Please reboot and try again". I reboot and try again, same thing.

2. The program "Sound Agent" to run the show. When I install the Sound Agent program, the error rec'd is: "VDI32.exe has encountered a problem and needs to close".

3. MusicMatch to channel the audio through to it. (Seems ok but tells me it's out of date - no biggie I can deal with that).

In Device Manager there is "Unknown Device" listed under System Devices shown to be not installed (the yellow exlamation mark through it). When I try to Update Driver it says, "Cannot Install this hardware. The hardware was not installed because the Wizard cannot find the necessary software".

Finally, whenever I reboot I get the error message: "The QVE bus driver is not detected. Reinstall the Qsound Virtual Audio Devices Bus Enumerator driver".

I have reform... Read more

Answer:A Real Tough One. PnP error, VDI32.exe error and a QVE error. Help Please

Your link is not working, but many things don't have 64 bit drivers. Did the drivers say for XP or specifically for 64 bit?

2 more replies
Relevance 22.55%

hii have a t61 and i am experiencing problems with the internal fingerprint reader, when i open the fingerprint software an try to enroll my finger it gives the following error: An Internal error occured (object:clsid-not-found(CID_Bio:iviceCache_Creator))and when i press on details button :error code E7210001 cannot enroll user can any one help me with this i am using windows vista Business SP2 with 2G of ram Cpu 2.0 Core2Duo Thanks

More replies
Relevance 22.55%


I am having a problem with the above error message (error:syntax.error) when I'm running Firefox.

I have uninstalled Java and reinstalled it, but still the same problem.

OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 8
RAM: 8099 Mb
Graphics Card: Intel(R) HD Graphics Family, -238 Mb
Hard Drives: C: Total - 698475 MB, Free - 580394 MB;
Motherboard: TOSHIBA, PEQAA
Antivirus: avast! Antivirus, Updated and Enabled


Answer:Error Message error:sytax.error - Firefox

See if you can find help here.

1 more replies
Relevance 22.55%

so i recently had this virus and someone on these boards helped me remove it. ty for that! but after 2 reboots it has come back..and with more errors this time like the explorer and drwatson. and also can you tell me why i have to do "open as" instead of just clicking on text documents? it says access is denied. i didnt do anything to get it again nor did i dl anything. anyway here are my logs any help is appreciated.

Answer:Csrsc.exe error, Drwtsn32.exe error, explorer error

I have reasons to believe that you have a file infector onboard.
Please visit this website -
Submit the file for a comprehensive scan & then post the results back here.


If it's virut, you need to wipe the machine immediately. Do not connect this machine to another one for you will infect that one too

7 more replies
Relevance 22.55%

My pc reboots for no reason when I try and access my network folders. I get the following errors in Event Viewer.

************************************************** ******

Event Type: Error
Event Source: ipnathlp
Event Category: None
Event ID: 31008
Date: 2004/11/10
Time: 07:33:55 PM
User: N/A
Computer: GIGS
The DNS proxy agent was unable to read the local list of name-resolution servers from the registry. The data is the error code.

For more information, see Help and Support Center at
0000: 6f 00 00 00 o...

************************************************** *******

Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 2004/11/10
Time: 02:40:01 PM
User: N/A
Computer: GIGS
Error code 00000051, parameter1 00000004, parameter2 00000001, parameter3 e12cfe18, parameter4 00008080.

For more information, see Help and Support Center at
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 30 30 30 30 30 30 35 0000005
0020: 31 20 20 50 61 72 61 6d 1 Param
0028: 65 74 65 72 73 20 30 30 eters 00
0030: 30 30 30 30 30 34 2c 20 000004,
0038: 30 30 30 30 30 30 30 31 00000001
0040: 2c 20 65 31 32 63 66 65 , e12cfe
0048: 31 38 2c 20 30 30 30 30 18, 0000
0050: 38 30 38 30 8080

**********************************... Read more

More replies
Relevance 22.55%

I am using a WD Proxkey DSC and while signing I am getting the following error"
"The Windows Cryptographic Service provider reported an error: The parameter is incorrect. Error Code: 2148073511"

More replies
Relevance 21.73%

Hello all,

I have a problem with Windows Update agent on Windows 7 SP1 enterprise.
We are using Configuration Manager 1606 and Windows 7 SP1 and about 140 computers works without any problem.
On the other 10 computers I got the following error message in the windowsupdate.log:
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING:     faultstring:Fault occurred
WARNING:     ErrorCode:InvalidParameters(7)

I've tried several actions although none does any help. Here is the list of actions:
- upgrade windows update agent to the latest version
- windows update agent reset by this instructions
- empty Temporary Internet files
- check the rules and blocked traffic on windows firewall and physical firewall between server and workstation vlan
- sfc /scannow

It looks like significant Windows 7 error, although reinstalling is not my option.

Thanks for any help!

More replies
Relevance 21.73%

i have promblme , i do not know how to fix it..
i have kodak scnners i1220 plus
i have RD Web Access
the promblme is..
I have a system based on Oracle has been connted with one scanners( i connected with scanners) When i do a scan shows me this a message
(Scan Error Error while Scan::0::LEAD Error: Twain source manager no)
(Scan Error
Error while Scan::0::LEAD Error: Twain DS is connected to max possible apps)

Knowing that the scanner system has worked to windows xp but when we tray on Windows 7 does not work
i have pormission administrator and i setup the scnners drivers agine still same problme..
i have windows 7 professional
service pack1
hp compaq 6200 pro MT PC
intel(R) core(TM)i5-2500 CPU @ 3.30GHz 3.29 GHz
4.00 GB
32-bit operating systme

Answer:Scan Error Error while Scan::0::LEAD Error: Twain source manager no

It's possible that TWAIN DSM is missing on your Win 7 machine. You can get it here and try again.

Catherine Sea
Dynamsoft: Provider of version control solutions & TWAIN SDKs

1 more replies
Relevance 21.32%

Hello there. Recently my computer have just randomly shutdown meanwhile i'm playing games like CS;GO, League of Legends. The screen will just turn black and it will start to make one hell of annoying noise untill it reboots.

I've updated all my drivers. Tested my memory. Tested my RAM. Run a virus scan. Checked the heat on my Graphic card and CPU. and all seems to work just fine.
This is the errors i get:

Log Name: System
Source: EventLog
Date: 25-12-2013 19:10:41
Event ID: 6008
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Snaski-PC
The previous system shutdown at 19:08:21 on ‎25/‎12/‎2013 was unexpected.
Event Xml:
<Event xmlns="">
<Provider Name="EventLog" />
<EventID Qualifiers="32768">6008</EventID>
<TimeCreated SystemTime="2013-12-25T18:10:41.000000000Z" />
<Security />
</Data&... Read more

Answer:Error 41, Error 1001 and error 6008.

Hi Snaski.

It is some display/graphics related issue.

Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of the PSU.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark
Let us see a screenshot of the furmark window, just before you close it.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Install the NVIDIA DRIVERS 314.22WHQL only.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Let us know the results.

* ... Read more

7 more replies
Relevance 21.32%

Hello,Ok so I have many issues with my laptop.First of all one day it failed and it was giving me the Hard drive not found (3F0) error.I decided to buy a new hard drive and still the same.Then I inserted a bootable usb (windows 7 pro 64bit) and tried to install windows.Then on the screen that I had to select the drive, the hard drive was shown.When I pressed to install windows a new error appeared. (ERROR CODE 0X8007045D).I devided to start over. Then again a new error appeared (Error 0x8004240f)I am really frustrated.What's wrong?Any advice?Thank you

Answer:3F0 Error, Error 0X8007045D , Error 0x8004240f

@ptheodoulou4abc? You need to partition the drive into one whole drive. You can use any free partition tool on-line. REO  

9 more replies
Relevance 21.32%

I've just install windows 7 home premium 64bit and got 4 times of BSOD.

for the first time error code is 0x0000001a
for the 2nd time error code is 0x0000003b
for the 3rd time error code is 0x0000003b
for the 4th time error code is 0x000000d1

I also attach minidump files and text files that I got from sf dianostic tool.

And another problem is I try to follow the instruction in this thread
How to fix BSOD caused by ntoskrnl.exe and ntkrnlmp.exe
and now I cannot start the normal window, I have to run in safe mode with network.

in the reply #4 that zigzag3413 post

Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here... Read more

Answer:BSOD by ntoskrnl.exe, error d1, error 3b, error 1a

For now, I do a restore point and be able to run the normal window7.

1 more replies
Relevance 21.32%

Hey to all.
I am new to this forum and I want an answer with an ERROR.
My ERROR is "Fatal Error,NET_SendPacket ERROR : NO ERROR"(the same as title of the thread)
it occurs whenever i try to play counterstrike 1.6,counterstrike condition zero or half life 1 over LAN with another computer on the same network.But as soon as i start the game in this computer OR try to find any LAN server the Other PC which is the LAN server has this error and it exits the game on that computer only and as a result I get no LAN server.
I first thought of googling this error out but nothing worked out like the QoS uninstallation and tweeking the administrative tools>Local Security Policy.(honestly i just tried these two because i cold not understand or read any further)
Ohh and I have just re-installed the windows xp sp2 on this system.
If Any Additional Information is required please let me know.
So can anybody help me?
and please be simple i am not a geek or nerd ya know,so HOW?

More replies
Relevance 20.5%

My System :
Windows XP Professional
Intel core 2 duo CPU T8100 @ 2.10GHz
1,99 gig of ram
Mobile Intel GMA X3100

My system sometimes restarts both in and out of games and so far have left these 2 events both 1003 and mini dumps as follows:

Event ID: 1003, Category: 102, Source: system error.

Error code 000000f4, parameter1 00000003, parameter2 87f91020, parameter3 87f91194, parameter4 805d297e.

Please help me, don't know what to do!

Answer:Random restarts -event id 1003 -system error- error code 000000f4

One of the many processes or threads crucial to system operation has unexpectedly exited or been terminated. As a result, the system can no longer function. Specific causes are many, and often best resolved by a careful history of the problem and the circumstances of the error message. One user, who experienced this on return from Standby mode on Win XP SP2, found the cause was that Windows was installed on a slave drive

The driver citted is crsss.exe and is an important part of your Windows OS.

See this link and read #2 to get some idea f what this driver does:

* It might pay you to do a security scan with your antivirus, etc.

1 more replies
Relevance 20.5%

During Windows backup, which wants to backup the 'C' drive and my games drive 'E' (for some reason), I get the following error message after the 'C' backup has completed but not the 'E':

'The backup operation that started at '‎2015‎-‎12‎-‎20T06:00:25.459859400Z' has failed with following error code '0x8078012D' (The operation failed due to a device error encountered with either the source or the destination. If the source or destination volume is on a disk, run CHKDSK /R on the source or destination volume, and then retry the operation.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.'

I ran CHKDSK \R and received several errors of the type: 'A disk read error occurred 0000185. The disk does not have enough space to replace bad clusters detected in file xxxxxx of name xxxxxx.'

My 'E' drive is 2TB with 205GB free. I really don't believe that the cluster(s) in error are bigger than 205G, but what do I know?

Anyone have experience with this problem?


More replies
Relevance 20.5%

I am on my 4th SSD in my Windows 10 laptop that has been getting SMART error 2000-0151. We have replaced the motherboard, the SSD, and the connector cable between the SSD and motherboard.

One thing is that I've been using Macrium Reflect to clone the drives. The new drives work for a few days with no errors, then I start getting the SMART warnings. I'm wondering if the cloning process I'm using could be causing this (and if so, any advice for avoiding/fixing the issue), or whether it's possible that I'm just having a string of bad luck with these drives.

These are WD SSD drives in an Alienware laptop. It's still in warranty and they said they will probably replace the entire laptop at this point.

More replies
Relevance 20.5%

I dont know how this started but i need major help please.... When I turn on my computer I receive an AutoIt Error, Line -1, Something went wrong with " Object" and when i dismiss the warning later on I receive Data Executive Win32 Prevention Errors and memory reference errors. I have read alot of forums for help. I have ran malware programs, virus scans, etc.... No luck its just getting worse and slowing down my computer and now I get a blue screen when I try to boot up in safe mode and the drivers loading screen comes up. What do I do?

I read the instructions for posting this type of post, and I have attached the logs requested.

DDS (Ver_2011-08-26.01) - NTFSx86
Internet Explorer: 8.0.6001.18702
Run by patesag at 16:03:47 on 2012-06-08
============== Running Processes ===============
============== Pseudo HJT Report ===============
uStart Page = hxxp://
mStart Page = hxxp://
uInternet Settings,ProxyOverride = *.local
BHO: AcroIEHlprObj Class: {06849e9f-c8d7-4d59-b87d-784b7d6be0b3} - c:\program files\adobe\acrobat 7.0\activex\AcroIEHelper.dll
BHO: DivX Plus Web Player HTML5 <video>: {326e768d-4182-46fd-9c16-1449a49795f4} - c:\program files\divx\divx plus web player\ie\divxhtml5\DivXHTML5.dll
BHO: PlusIEEventHelper Class: {551a852f-39a6-44a7-9c13-afbec9185a9d} - c:\program files\nuance\pdf professional 7\bin\PlusIEContextMenu.dll
BHO: Groove GFS Browser Helper: {72853161-30c5-4d2... Read more

Answer:AutoIt Error, Data Prevention Win32 Error, and Memory Reference Errors.... Help!!!!!!

When the drivers loading screen comes up during safe mode boot the computer goes to a blue screen. I never faced this problem before. Please help....

19 more replies
Relevance 20.5%

When I try to boot my W520, I get a BIOS boot up error : "2100: Detection Error on HDD0 (Main HDD)". I am using PNY XLR8 240GB SSD. It worked fine for a month. I also have PGP installed and whole disc encrypted. I installed an update of Intel Management Engine Firmware and Intel Chipset, both are the latest from lenovo site because I was experiencing expreme slowness from my harddrive. Programs would freeze. Webpages would take forever to load..The next time I rebooted, I got the error. If I leave the SSD out for a bit, and put the SSD back in, the disk will work for some time... but on next reboot, it is again detection error.. TRIM is enabled on my system. I am not sure how the SSD died so quickly. I am back to using my HDD but I am not happy. I want a solution... is this a intel chipset issue? Intel IMEI issue? Is  the PNY SSD just a bad model? I've googled plenty and dont really see a solution. Sometimes there is a firmware update.. PNY has no firmware updates for my drive.. I don't see anybody else using PNY on their W520, but plenty of people are experiencing Error 2100 with SSD on their W520.. somethings fishy.. help please! thanks in advance !

Answer:W520: PNY XLR8 240GB SSD with error "2100: Detection Error on HDD0 (Main HDD)"

I don't have a ThinkPad W520 or a PNY SSD, but could it be simply that the SSD is coming loose inside the ThinkPad's chassis?  I suppose this could occur if a 7mm high SSD was inserted into a 9.5mm high 2.5" drive bay with a ~2mm spacer to "pad" the unused vertical space.
Aryeh Goretsky

3 more replies
Relevance 20.5%

I am trying to install cakewalk SONAR 7 and I get this error when running the installation and start the small window on "c++ 2005":

"Error 1935. An error ocurred during the installation of assembly
'Microsoft.VC80.ALT.type="win 32", version="8.0.50727.762", publickey Token="1fc8b3b9a1e18e3b", processor Architecture="AMD64". Please refer to help and support for more information."

When I checked the event viewer, I have a Vista application event ID 33, with the description below,

Could not be found. Please use sxstrace.exe for detailed diagnosis."

When I try to run the sxstrace.exe, I have then this message (the error message is in blank.):

"C:\Users\Xxxxx Comp>sxstrace parse -logfile:sxstrace.elt -outfile:sxstrace.txt
Parsing log file sxstrace.elt...
ProcessTrace failed. Error message is:"

I been google this problem and try different approaches for the last 3 days and nothing fix this problem. I try to install microsoft visual c++ 2008 and c++ 2005 and have similar errors.
Any help in this matter will be highly appreciated, right now is a "dead end"...

Thanks, guys in advance for the help in this matter...

Answer:"Error 1935. An error ocurred during the installation of assembly 'Microsoft.VC80.AL


Just to confirm for us, install the Visual C++ redist 2005, then VC++ redist 2005 SP1, then VC++ redist 2008, then VC++ redist 2008 SP1. Only restart PC after last one has finished and do them in order, one at a time. This will take quite a long time, let them finish. Then run windows update and select everything, in particular the updates for the VC++ redists (mainly security updates) and restart PC again. Tell us if anything here fails and any error messages you get. Are any of your applications getting side by side configuration errors? Then try your program install again. Hopefully it will now work. Tell us what happens. Will try and post links later as this post sent off iPhone.

Hope this helps, though you may have already done this.


P.S. You could try sfc /scannow though I really doubt it will help.


Here are the web addresses in the correct order:

2 more replies
Relevance 20.5%

Hello, i am having a problem i get
Stop: c0000221 unknown Hard Error /system/system32\ntdll.dll

What im trying to do is formating my computer i restart my pc then i boot up xp cd, then it loads, and gets to say Starting Up Windows, cd stops, then goes black then blue and ntdll.dll error. I tryed reisntlaling windows, overwiritng file, please help!

(i have readed all the posts about this error to but that didn't help in my case.)

Answer:Stop: c0000221 unknown Hard Error /system/system32\ntdll.dll ERROR


Originally Posted by oshwyn5

Xceltron: It really would be helpful if you kept it all in one thread and told us all your symptoms.
I see you have more than one thread as well as asking for help in someone elses thread. THis makes it very hard to follow.

Let me start with analysis of this error.

If you are getting this error when trying to reinstall from your XP cd, then it sounds like you have a loose damaged or incorrect cable to either your cdrom or hard drive. I suggest replacing them both with quality 80 wire 40 pin IDE cables. It can also be caused by incorrect configuration if you have RAID or SATA drives.
Finally you may want to try with just one stick of RAM installed. If you have more than one now; you should try each in the slot nearest the processor all by itself until you rule out one of them being bad (If it works with one stick and not the other, you know the other is bad).

There is more information on possible causes of this error at ahuma ; but my first suspicion on seeing the image checksum mismatch is that the file in question has been replaced with something else, a trojan or virus.

Please download
Mcafee stinger multivirus removal tool
Install and run

Spybot search and ... Read more

9 more replies
Relevance 20.5%

Edit: Think my hard drive may be failing and was the cause of my file synchronizing crash. I use it mostly to stream music and video and access the hard drive a lot. Any advice thanks

HDDStatus - Tool to check hard disk status, health and reliability


I've been using GoodSync for the past couple of months to chain synchronize 3 hard disk drives and ran into my first issue today. GoodSync stopped responding whilst synchronizing changes to files so I used task manager to manually end the process.

I'm not entirely sure how much damage has been caused but when I re-analyzed the file changes a lot of the changes prior to the crash was no longer listed.. So I'm unsure of the file integrity but have so far noticed some music video files are corrupt with cyclic redundancy check errors but is not easily visible to check corrupt files because they still play but parts of data are missing.

I think I've experienced cyclic redundancy check errors before when my external hard drive fell flat on it's side whilst it was playing music (3 years ago). It took me a long time to filter out the bad files because all the mp3 files worked but some songs would randomly play in others etc.. is their some type of automated CRC scanner or method to check all my files ?


Answer:Error copying file: Data error (cyclic redundancy check). CRC Scan ?

If you are able, try this programme, it is VERY good. HDD Regenerator - Dmitriy Primochenko Online

1 more replies
Relevance 20.5%

I wonder if you can help me.
I keep getting error 0x800f0906 when running DISM /Online /Cleanup-Image /RestoreHealth.

DISM /Online /Cleanup-Image /RestoreHealth
Deployment Image Servicing and Management tool
Version: 6.2.9200.16384
Image Version: 6.2.9200.16384
Error: 0x800f0906
The source files could not be downloaded.
Use the "source" option to specify the location of the files that are required to restore the feature.
For more information, review the log file.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
relevant bits from it seem to be:
Checking System Update Readiness.

(p)    CSI Payload Corrupt            amd64_microsoft-windows-windowsupdateclient-ui_31bf3856ad364e35_7.8.9200.16927_none_28265fa316d944b7\wuaext.dll
Repair failed: Missing replacement payload.
(p)    CSI Payload Corrupt            amd64_microsoft-windows-windowsupdateclient-ui_31bf3856ad364e35_7.8.9200.16927_none_28265fa316d944b7\wushareduxresources.dll
Repair failed: Missing replacement payload.

Operation: Detect and Repair
Operation result: 0x800f0906
Last Successful Step: Entire operation completes.
Total Detected Corruption:    2
    CBS Manifest Corruption:    0
   &nb... Read more

Answer:Error when running DISM /Online /Cleanup-Image /RestoreHealth - error 0x800f0906

Please upload the DISM.log files into OneDrive and post us the link here. The DISM log file can be found at
Besides, for the CSI payload corrupt issue, please take a try to reset the Windows update components. Then try to run the command and check the results:
Follow this guide: How do I reset Windows Update components?
In addition, update the system to Windows 8.1 will make a better usage of the features and functions offered.
Windows 8.1 and Windows RT 8.1 build on
Windows 8 and Windows RT, to bring you enhancements in personalization, search, apps, the Windows Store, and cloud connectivity, and has the security and reliability features you expect from Windows. It's fast and made to work
on a variety of devices?especially on the new generation of touch devices.
For more information regarding update to Windows 8.1 from Windows 8. please see:
Update to Windows 8.1 from WIndows 8
Best regardsMichael Shao
TechNet Community Support

5 more replies
Relevance 20.5%

Hi, I got this error message this morning right after trying to get the laptop off standy off and it froze, so re-booted and voila this error came up... have read up a bit about it, and it seems I'd need to get a BOIS uprgade done, but dont know how to go about it now that I can't log-on... The bigger problem is that Lenovo does not support the T61P in India, andif I cant fix it by myself I am left saddled with a a very heavy paper weight! Thanks,Conred

Answer:ERROR 2100: HDDO (Hard Disk Drrive) initialization error (1) with T61P

Hi Conred, here is the link to the bootable bios update for you T61P. should work if there's no prob. with your HD. Jay

T61P(6459-CTO) T9300 @ 2.5 GHz, 4g ram, Quadro FX 570M, Vista Bus. 64Bit, 160gig 7200 rpm HD, WSXGA disp.

2 more replies
Relevance 20.5%

This message now appears on an otherwise excellent computer.

Cannot connect to wireless broadband (I'm doing this on my Equium P200D)

Any ideas. I've tried the Toshiba help to no avail.

Answer:Qosmio E10 CFSServ Listen Error & Recv InitConnect Error appears on startup


Someone wrote in this forum that the CFSServ is part of ConfigFree utility.
Remove ConfigFree application from the system and try to use and configure your WLan again or try to use the LAN connectivity!

Check it out

1 more replies
Relevance 20.5%

I get all those messages at start up, plus superfetch has stopped working, and sometimes windows explorer has stopped working. I know it's some type of virus from something. So far safe mode has been working (slowly). Yesterday I had a friend reinstall(?) vista on it so I'm not sure if it would qualify as a legal copy or not anymore but it was actually much worse before that. It couldn't even start up right normal or safe mode.

it is a hp G60t-200, and the OS is vista, I'm not sure what other info would be needed for this. Please help if you can.

More replies
Relevance 20.5%


I've been having Kernal data inpage error which I assume is from a faulty harddrive (or maybe the RAM?!). I occasionally get a disk check during bootup, which didn't seem to help. I was saving up to buy a hybrid SSD/HDD drive before replacing it, but now it seems a bit too late.

Yesterday after a windows update, I rebooted my computer and the desktop was running very slow, nothing would open, explorer.exe would crash, I would be stuck in desktop until I force shutdown by holding the power switch (Shutdown didnt work), after doing this once or twice, I now get a BSOD again with a registry error right after the desktop loads for 1-2 seconds. X051 error code I think.

What step should I take now to diagnose the problem?

More replies
Relevance 20.5%

Hi,I have fundamentally the same problem as Laura H from this thread've had problems with these fake antivirus programs before and they really did a number on my laptop. I treated the problem using various tools mostly malware bytes and deleting some suspect files.Been working fine for the most part however today out out of nowhere I was attacked by malware doctor. I deleted the suspect file from the temporary internet files folder and ran malware bytes that detected trojan and deleted. Shortly after drwatson ??? was shut down and some time later I think explorer shut down because my desktop went back to theme,desktop wallpaper etc. the windows 95 look if you grasp what I'm trying to get at. I thought it was no big issue and in my own time restarted laptop when I realized audio wasn't working after trying to play a film.Upon restart I get the blue screen with the same message as Lauras. So for the most part I'm in the same situation as Laura with some minor differences such as I didn't use Spy doctor etc.I have Kaspersky AV installed which has been inefficient in protecting my laptop lately, especially from these fake AV attacks. I am using Windows Firewall which I know is a bad idea.Myrti was helping Laura resolve the issue and I have followed her instructions upto the following actions:'locate this file and right click it > choose rename > rename it to userinit.txtnow we wi... Read more

Answer:Malware doctor infection removal and then error c000021a (fatal system error)

Hello,Please follow the instructions in ==>This Guide<==. If you cannot complete a step, skip it and continue.Once the proper logs are created, then make a NEW TOPIC and post it ==>HERE<== Please include a description of your computer issues and what you have done to resolve them.If you can produce at least some of the logs, then please create the new topic and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the topic and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.Orange Blossom

6 more replies
Relevance 20.5%

Stop: c0000221 unknown Hard Error /system/system32\ntdll.dll

I get the above error while i try formating my computer. i restart my pc then i boot up xp cd, then it loads, and gets to say Starting Up Windows, cd stops, then goes black then blue and ntdll.dll error. Another error

Missing Operating System

I get this error when i try to start my computer.

I am using a compaq laptop......Please help me out.

Answer:Stop: c0000221 unknown Hard Error /system/system32\ntdll.dll ERROR

Hello ,

what you need to do is erase the harddrive then do the reinstall , you can get a free program that you can create a bootable cd to do this with from here


or you can download the tools to do this from the manufacturer of the harddrive

either way you will have to make the bootable cd

make sur you read the instruction on the way to use the program

then start your system then put in the cd / reboot to load the cd and then erase your drive

depending on the size of your dive this can take from 1 to 5 hrs

this will write the drive to zero's and make it as if it never had software install on it ( like new from the factory)

Mike R.

2 more replies
Relevance 20.5%

Agent.exe - Entry Point Not FoundThe Procedure entry point qsovt could not be located in the dynamic link library C:\Windows\SYSTEM32\apphelp.dll.I get this error whenever i try installing something new. I have a 128GB SSD that has my operating system, and a 3TB HDD that i use to store everything else in like movies, games, programs, etc.Whenever i try installing something, this error pops up multiple times, when i press "OK" it disappears and pops up again. It doesn't stop the program from successfully installing, but it's annoying. How do i fix this?

Answer:Agent.exe - Entry Point Not Found Error / Dynamic Link Library Error

It's for Forte's email client...and InstallSheild in some cases...

3 more replies
Relevance 20.5%

This morning I installed new Hard Disk (WD Black2 Dual Drive) on my notebook Lenovo T410, then installed Win 8.1 on it too, It worked  for about 4 hours and my notebook stopped working. I tried to restart the system, but appeared the error: "ERROR 2100: HDD0 (HARD DISK DRIVE) INITIALIZATION ERROR (1). How can I fix it?


Hi Wjroque,
Welcome to Lenovo Community!
As per the query we understood that you are facing issues after up-grading the WD Black2 Dual Drive on your ThinkPad T410.

Have you checked with updating the WD Black2 Dual Drive firmware for your system?
Please click here to visit the link to download the firmware for that and follow the WD Black2 Firmware Update Instructions.pdf located in the downloaded zip file.

Hope this helps.
Best regards,
Hemanth Kumar

Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

4 more replies
Relevance 20.5%


I'm really not good in computers and things, but I'll try my best to describe the error in my laptop:

I have a Satellite A200 (with Vista) I bought about 4 months ago here in Australia. It has a virus last week, so I made the recovery disk on 2 brand new blank DVDs using the Recovery Disk Creator and the creating process ran smoothly with no glitches.

Straight afterwards, I ran the recovery disk in what I think is called the boot menu? Anyway, after a couple of minutes I kept getting an error message that has something to do with "Preinst.swm file". After a few times of clicking "continue" and seeing this same error message, clicking "skip", and running the 2nd DVD, an error message shows "Error: F3-F000-0008".

Now I'm assuming that the preinst.swm error message is due to probably a scratch in the recovery disk, or some fault in the DVDs that I used and not with the actual laptop itself. I just need confirmation from you guys about this.

I'm guessing the best way to go about is just to get another Vista recovery disk (from the shop I bought the laptop from) then? Or is there another way to solve this problem that I can do before heading off to the experts? I use this laptop for work so really - no laptop, no work done!

Thanks in advance.

Answer:Satellite A200: Recovery error - Preinst.swm file Error: F3-F000-0008

Really not easy to say why the recovery procedure does not work.
But for me one thing is clear.
If you have 2 recovery DVDs, you have to boot always from the first one!!!
If you will boot from wrong DVD, you will get always an error message.

In my knowledge the Toshiba notebooks for European market are delivered together with all necessary CDs/DVDs and the Recovery medium is always in the package.
I don?t know why Toshiba Australian didn?t send the Recovery DVD together with the notebook. Maybe the Recovery DVDs are simply to available and they provide only option for a recovery creating?. Who knows...

However, it?s worth to try contacting the authorized service provider in your country and to ask if you can order a new Recovery CD for you notebook.

Good luck and best regards

1 more replies
Relevance 20.5%

I posted this earlier but reposted this and erased the old thread because I have more information now and have narrowed down the problem (I hope).This problem just happened yesterday after I had to manually shut down (used power button) my computer after it froze. Now when I try to load up IE, it "halfway" opens up (you can see parts of the interface) and just freezes. I thought maybe it was an IE problem, but if I try to load up Firefox (even without loading up IE first), nothing happens -- it won't load. I load up the Task Manager and firefox.exe is there as a process even though it hasn't loaded. The only way I did figure out to surf the net is to load up "My Computer" and enter a web address from there manually. But even when I do that, if I click on any link that opens up a new window, IE will try loading that new window up which freezes. Right after this happened, I get a "Generic Host Process for Win32 Services Error" (still do every now and then. I also d/l'd the "patch" for this from Microsoft's website to no avail) which says something about svchost.exe and some other exe's. I think it has something to do with networking because I loaded up "Event Viewer" from the Control Panel and I managed to track down the error I get *each* time my computer starts up These errors I get are *all* dated right after I had to manually shutdown the computer and when the problems began. Here it is:Source: DCOMEvent ID: 10005DCOM got e... Read more

Answer:Generic Host Process For Win32 Services Error / Dcom Networking Error -- Help!

Hi and welcome to Bleeping Computer! My name is Sam and I will be helping you. Please download ComboFix and save it to your desktop.Double click combofix.exe and follow the prompts.When it's done running it will produce a log for you. Please post that log in your next reply.Important Note - Do not mouseclick combofix's window whilst it's running. That may cause it to stall.

12 more replies
Relevance 20.5%

I have an Acer 6920, Vista, and I have taken the following actions after the computer would not boot:
a. ordered reinstall disk from Acer
b. reinstalled the system using the four disk
c. worked with computer normally for three weeks
d. encountered the original problem again of not booting
e. tried to go back to factory settings using the reinstall disk from Acer
f. after 65%, encountered the 0XD00000A error
g. tried again, and encountered the same error

Is this a Vista problem, an Acer problem, or something that happens often?

Any help would be greatly appreciated.

More replies
Relevance 20.5%

Help, can't print anything and can't find out how to fix that error code

Answer:Printer Spooler has a error message <Failed to Read Description. Error Code: 193 >

Hi, go to start search and type:- cmd, right click on the returned cmd.exe and select "run as administrator" at the prompt (copy paste)

sc queryex spooler > 0 & notepad 0
(press enter) I am guessing we will see error 1058.

Next still at cmd type:-

net start > 1 & notepad 1
(press enter)

Please post both notepad entry's here.

4 more replies
Relevance 20.5%

no matter how many times i clean the drive it will still come up with this error. i can't figure out what is going on. i am able to convert the movie just fine but when it comes times to write to blank dvd, it won't do it. this is the problem i am having on my laptop which i will include the log. for some reason on my pc the program convertxtodvd doesn't even acknowledge that i have a dvd drive , i believe it is the pcouffin, which i have uninstalled and reinstalled but i cannot get it to work. it says it is working fine but device no longer available. well here is the log from my laptop which will convert but will not finish the copy.

2/20/2008 1:29:47 AM info ********** Report session closed ***********
2/20/2008 1:29:30 AM error BURN: Write error at 0 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burner is dirty)]
2/20/2008 1:28:14 AM info BURN: Write started 894784 sectors to write
2/20/2008 1:28:14 AM info BURN: Writing speed requested x4.0, effective x4.0
2/20/2008 1:28:13 AM info BURN: Available write speed: 8x, 6x, 4x, 2.4x
2/20/2008 1:28:13 AM info BURN: Media ID: SONY-D21-00
2/20/2008 1:28:13 AM info BURN: Media type: DVD+R
2/20/2008 1:28:13 AM info BURN: Multiword DMA Mode 2
2/20/2008 1:28:11 AM info BURN: Scanned files #8, folder #2 - total size 1831393280 b. (1.71 Gb.)
2/20/2008 1:28:11 AM info BURN: Inserted media type : DVD+R
2/20/2008 1:28:11 AM info BURN: Write started
2/20/2008 1:28:10 AM info --------... Read more

Answer:Write error at 0 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burne

Replace the laptops burner... Laptop/notebook CD/DVD R/W's are very delicate and are more subject to failure than desktop writers

3 more replies
Relevance 20.5%

I am trying to download OOTP 11. I keep getting error messages....first it will come up...error reading from file(and than the file name)..than an .exe. is not a valid message error....than a not a valid win32 application error. I am downloading on windows xp, and from a disk. I would appreciate any help given. Thank you!

Answer:not a valid win32 application error/ error reading from file errors downloading

This is the program you want. There are both Windows and Mac versions. Make sure you have the right one. Also, try an alternate download site.QuoteOut of the Park BaseballFrom Wikipedia, the free encyclopediaJump to: navigation, searchOut of the Park Baseball 11Developer(s)    OOTP Developments Publisher(s)    OOTP DevelopmentsPlatform(s)    Mac OS X, Windows, LinuxRelease date(s)    April 2010Genre(s)    Sports ( Baseball), SimulationMode(s)    Single playerMultiplayer (Hotseat, TCP/IP)Media/distribution    Digital DownloadSystem requirementsWindows: Windows Vista or XP, AMD or Intel Dual Core 2 GHz, 1 GB RAM, 1024x768 32-bit display, 1 GB HD spaceMac OS X: Mac OS X 10.4.8, PowerPC G5 or Intel Core Duo 2 GHz, 1 GB RAM, requires OpenGL support for face generationOut of the Park Baseball, abbreviated as OOTP, is a text-based baseball simulator for career, historical, and fictional play. OOTP was originally written in 1998, when lead developer Markus Heinsohn sought to combine realistic replay baseball simulation with career play to satisfy hardcore fans and casual gamers alike. OOTP does not hold a license from nor currently have any affiliation with Major League Baseball.

4 more replies
Relevance 20.5%

Hi All
system info : HP LAPTOP DV6 -1256tx , windows vista sp1 32 bit
When I am trying to install windows vista sp1 from recovery disks/partition I am getting the error from recovery manager prompting me to choose either to retry or see the details for failure : CTOERROR.flg in form of notepad on my desktop. I have done retry 100 times but to no avail. I cannot restart after this recovery failure message as it shows dialog box on restart: windows security update is not installed successfully or is not trusted.So, i have to go through recovery process again to see the desktop (everything functioning - internet,video, music all) but only once.
Last time i got this message too . When i did installing windows from recovery disks few months back, that time i figured out to install all imp. updates through automatic windows update.All the updates were installed successfully and then it restarted and gone through process of language settings,time settings and all....
But this time when i am trying to update windows, i am getting windows update error 0x643 which is for security update for .net framewrok 3.5 sp1 and family update.I do know the answer how to get away with this error from "windows help" and also from this forum too, which asks for installing .net framework updates from windows update site directly. But the problem is:
Windows update ask me to restart after automatic or manual windows update installation takes place and restart causes problem as it shows d... Read more

Answer:Windows vista recovery error CTOERROR.f​lg and following that error 0x643 while insta

Do you have the original (no SP1 or SP2) Vista installed? You won't be able to install SP1 otherwise.

7 more replies
Relevance 20.5%

Hello, I upgraded my X120e to windows 10 but continually get a windows update error for the Conexant audio.  Has anyone run into this and found a solution?Thanks.

More replies
Relevance 20.5%

My friend has a Toshiba Satellite P75-A7200 and when he tries to boot up his computer he get a "Checking for media error" then "no bootable device found error". Multiple reboots same thing. His antivirus expired and he thinks he got a virus. Is there any way to flash a clean bios to his computer? He has Windows 8.1 and cannot get it into troubleshooting mode. Any suggestions? I'm old school and am used to boot disks.

Answer:Satellite P75-A7200 Checking Media error then No Bootable Device found error.

In order to boot from external device (like CD/DVD drive, USB flash memory stick, etc…) you have to disable the secure boot option within the BIOS settings.

If you want to boot from the internal HDD and the error still appears, then HDD could malfunctions…
In such case you should check whether the HDD is listed in the BIOS.
If not, you should replace it.

1 more replies
Relevance 20.5%

Hello and good evening to you all, I urgently need some help please and i'm HOPING that there is a solution here here please. My neighbour brought her laptop round to me this evening, that she was listening to music on it yesterday, and it just went off. I though it was a virus, as ive sorted out her laptop for her before, when it had a vius,...but this time it seems different.
Its a Windows vista laptop, and she's had it for about 3 years now. Its a compaq laptop. All her music, word docs, family photos are on her laptop, and NOTHING is backed up anywhere.
I've switched it on and I get the exact following message: LOADKEY FAILED WITH ERROR 1009 (STHIVE#0)
SO ive tried it in safe mode with f8, and sstill same message,....
Ive switched it back on, and then it askes whether to launch startup repair(recommended)..
I clicked on yes, and it said loading files........
Them it takes me to the system recovery options screen,...where it says Uk, and tells me to select next....
I've stopped here as ive no idea wheterh it'll will work ir actually WIPE the whole laptop, and hence my neighbour loses ALL her stuff on the laptop..which I dont waht at all.
Any suggestions please???

Answer:Urgent Help needed...Error Message: LOADKEY FAILED WITH ERROR 1009 (STHIVE#0)

Hi - you should be fine -I had a start up problem once (not same one) and used the start up repair and it sorted it without affecting my data - may be worth awaiting a second opinion from someone who knows what the problem is though!

10 more replies
Relevance 20.5%

Every time the computer reboots the message "GetEseDbInfo.exe has stopped working" appears. Checking for solutions yields no results.
Since this message has started:
- Windows search has quit working and states that "windows cannot access the specified device, path, or file. You may not have appropriate permissions to access them." 
- IE will only show a white screen and will not allow the tools option to be accessed. It keeps trying to recover and  cannot find any solution. Attempted downgrade to IE 9, re-install of IE10, use windows fix, and microsoft safety scanner.
-  Sticky Notes is unable to launch as it cannot access the file. 
I have run AVG, Advanced SystemCare, and Malware Anti-Malware but they all show up with nothing found. I don't know if these are all tied into together or are separate issues. 
The computer is a Windows 7 64bit operating system. 
Any help would be wonderful. Thank you!

Answer:GetEseDbInfo.exe error, IE White Screen, Search Access, & Sticky Notes Error

Open Task ManagerProcess (tab)Find GetEseDbInfo.exe, right-click and select "Disable"Reboot into Safe Mode with Networking. ADW CleanerPlease download AdwCleaner by Xplode onto your desktop.Close all open programs and internet browsers.Double click on adwcleaner.exe to run the tool.Click on Delete.Confirm each time with Ok.You will be prompted to restart your computer. A text file will open after the restart.Please post the contents of that logfile with your next reply.You can find the logfile at C:\AdwCleaner[S1].txt as well.   Last run ESET.Hold down Control and click on this link to open ESET OnlineScan in a new window.Click the button.For alternate browsers only: (Microsoft Internet Explorer users can skip these steps)Click on esetsmartinstaller_enu.exe to download the ESET Smart Installer. Save it to your desktop.Double click on the icon on your desktop.Check "YES, I accept the Terms of Use."Click the Start button.Accept any security warnings from your browser.Under scan settings, check "Scan Archives" and "Remove found threats" Click Advanced settings and select the following:Scan potentially unwanted applicationsScan for potentially unsafe applicationsEnable Anti-Stealth technologyESET will then download updates for itself, install itself, and begin scanning your computer. Please be patient as this can take some time.When the scan completes, click List ThreatsClick Export, and save the file to your desktop using a unique name, such as ESETScan. In... Read more

6 more replies
Relevance 20.5%

I have windows live mail 2008 Build 12.0.1606 installed on windows xp and everytime a few seconds after i close wlm i get a windows live mail encountered a ploblem and has to close error that tells me to send a report..this happens 80 percent of the time after i close the windows live mail application...By the way i have disable error reporting checked on advanced properties and disabled on services also ...i noticed on the task manager that the wlmail exe process is still running after i close the application and that seems to be the problem..Is there any way, fix or some program that i can get the wlmail.exe process to close at the same time i close the windows live mail application so i dont get this send error report message anymore ?

error i get ^

wlmail.exe still running after closing application ^

Answer:windows live mail 2008 (Build 12.0.1606) error report error

Hi gbp007,

Try to End Process the extra wlmail.exe file in the Task Manager Processes to see if it will stop the error for you next time.

Task Manager - Open and Close Applications and Processes


13 more replies
Relevance 20.5%

Hey guys, i want to thank you ahead of time for helping me.

This BSOD is a pain in the butt.

Intel Pentium 2.8GHZ
RAM 3.5
32 bit OS
Intel GG965 Express Chipset Family

I have already reinstalled the operating system multiple times, i think its a faulty graphics card, but i want to be 100% sure before i go and shell out the $$ for a new one

Please help The blue screen error points to igdkmd32.sys & it also says GRAPHICS_DRIVER_TDR_FAULT

Answer:BSOD error.. Restarts, but power button stays on, graphics card error?

STOP 0x00000116: VIDEO_TDR_ERROR (go to top of page)

Usual causes: Video driver, overheating, bad video card, ?BIOS, ?Power to card (see Significant Posts section below)

Incase you have overclocked your GPU reset it to the default.
Update your graphics driver to the latest stable version

1 more replies
Relevance 20.5%

I have installed a Vertex 2 (2VTXE180G) some time ago in my Thinkpad T410 (2522-3FG). The installation was successfull, but after less than a week I got the 2100-Error.I thought, that the SSD could be damaged, so I sent it to warranty.Last week I got the replacement drive and today I wanted to install the drive. But it did not work. 2100-Error since the first boot. Is this a problem with T410 and the Vertex2 SSD?Should I send the drive to RMA or should I choose another drive? Does somebody run this combination without problems? Thanks,André 

More replies
Relevance 20.5%

I did tried to update an old modem about a week ago and ever since I cannot connect to the internet. I have two laptops and works fine. I have a wireless set up.

I just tried plugging in the Ethernet connection to the laptop to no avail. Still no connection.


HP Compaq nc6230
Wireless setup

I tried connecting to other unsecured wireless networks in the area and still was not able to access the internet.

Please help.

Thank you.

Answer:Laptop cannot connect to Internet - DNS Failure, Gateway Error 0x2afc, Error 12007

8 more replies
Relevance 20.5%

Agent.exe - Entry Point Not FoundThe Procedure entry point qsovt could not be located in the dynamic link library C:\Windows\SYSTEM32\apphelp.dll.I get this error whenever i try installing something new. I have a 128GB SSD that has my operating system, and a 3TB HDD that i use to store everything else in like movies, games, programs, etc.Whenever i try installing something, this error pops up multiple times, when i press "OK" it disappears and pops up again. It doesn't stop the program from successfully installing, but it's annoying. How do i fix this?

Answer:Agent.exe - Entry Point Not Found Error / Dynamic Link Library Error

It's for Forte's email client...and InstallSheild in some cases...

3 more replies