Computer Support Forum

BIOS latest update, windows 10 HELP

Question: BIOS latest update, windows 10 HELP

Hello I would like to ask:I updated my BIOS last night to the latest version. I am on Windows 10, HP Envy x360. I updated it sucessfully and I am not facing any issues as of now. I wasn't facing one before I updated. Everything was going smoothly but I saw in the HP Support Assistant that I have numerous things to update so I clicked it all & updated. When the BIOS finished installing the computer restarted and I continued updating the others (which included the BIOS internal) but in the middle of the update, I stopped it. And it said it's not applicable anymore. I clicked to update again & the other 3 (there was 4 of them including the BIOS internal) updated succesfully. I even contacted support at that same night to let them do the manual update to give me a peace of mind. The technician said I updated it correctly. But what I read on everyp site on the internet that not to update the BIOS. So I am worrying & scared right now because my laptop might encounter problems that weren't there before the update. I am regretting my decision, I am not a techy person and I don't understand the computer world very well yet I decided to update without knowing first what it was. I am very scared of what might happen because of my carelessness.My questions are:1. Will updating the latest version of the BIOS without any problems in the hardware or anything (it was running smoothly, I just recently purchased it) harm the laptop or give problems to the laptop?2. What can I do to avoid issues after the BIOS update?3. Any tips?4. Is keeping everything up to date bad for the laptop? OR: was updating bad for my laptop?5. What are the few indications that my laptop is experiencing issues due to the update?Thank you for your time & effort to read & reply to my questions.

More replies
Relevance 100%
Preferred Solution: BIOS latest update, windows 10 HELP

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 71.34%

Greetings!

I have Acer Aspire 5750G. My current BIOS version is 1.07. The latest version is 1.12.

There are a few versions in between. Should I do incremental updates and reach 1.12 or should I just go direct to 1.12?

Many Thanks!

Answer:BIOS - Incremental updates to latest vrsn or direct update to latest?

Bios updates are cumulative, so you only need the latest.

You also don't need to update the bios unless there is a fix in it/them that fixes an issue you may be having. For the most part updating the bios is as easy as updating a driver, only if a bios update goes wrong you can't roll back to the old and you basically end up with a nice paperweight.

2 more replies
Relevance 70.52%

I am trying to upgrade the current bios (v1.60) to the latest (v2.10) I downloaded P0054v210.exe but when I try to run it I get the error 'BIOS update is not supported OS....' I have tried XP compatible mode but still no luck. I don't want to have to reinstall XP if possible.

I read elsewhere that installing the Value Added Pack would work but it was already installed. I have now unistalled the VAP and installed it again with no errors reported. Still can't run P0054V210.exe.

However, when I try to run HW Setup from the Toshiba Utilities folder on the Start menu I get "HCI Load Error!!" followed by "SCI Load Error!!" but it then puts up a Setup dialoge box with "General" tab with details of the current Bios version. I have uninstalled and re-installed twice and still get the same problem.

Is this a hardware problem?

Answer:Re: Tecra A9 cannot update to latest BIOS on Windows 7

Hi buddy,

Why you try updating the BIOS?

Is something not ok with your notebook?

3 more replies
Relevance 68.47%

I bought a Dell XPS 8900 about a year ago and have had 0 issues with the setup. Tonight, the SupportAssist Dell App popped up saying my system needed critical system updates. Listed was a BIOS update (don't recall the version number). I let it install and update the BIOS but now my computer goes from the black and white DELL logo screen to a support assist white screen that appears because I have removed a fan in order to install a Radeon Fury X. I usually have to hit escape from that screen to load windows but instead the boot process starts all over again and I go back to the black and white DELL logo screen and the process stays in this endless loop. I have loaded the BIOS options and it says 2.1.10 as the BIOS version. I have tried to both use BIOS restore and Downgrade BIOS but nothing works and my system refuses to boot Windows. Is there an older BIOS version I can manually flash to correct this issue? I have had no issues with anything prior to updating the BIOS so can only assume that is the culprit. Perhaps an incorrect or corrupt BIOS upgrade? I let the computer do its thing and had no power outage, <profanity> thing just refuses to boot Windows. I cannot even get safe mode to come up (if I am using the proper keyboard command that is).

More replies
Relevance 63.55%

I have Thinkcentre A52-8113-Y7G and i have installed new 945 PentiumD but it is giving me messege after POST "processor BIOS update not found" although i have updated my bios with latest update available but still i am getting the same message i upgraded using winphlash provided on site but i have created the bootable CD using ISO image but that CD is not working at all!!! (i think there must be a problem in my creating processor) is there any way to solve this problem? any one help

More replies
Relevance 63.14%

Hi folks,
When windows 10 was first released I downloaded it and burned to DVD using the media creation tool from Microsoft.
As windows 10 has now had a major update, and I want to create a DVD with that update on it, without having to reinstall it later, as I have other partitions on my computer to update to 10 as well.
So my query is, does anyone know if I was to download windows 10 32 bit from Microsoft again (using the media creation tool from Microsoft) will it include the latest major update to 10?
Thanks for any help

Answer:Is windows 10 latest big update included in latest media creation tool

Microsoft has made available a download able iso for win 10 1511. If you don't see download link on win pc then try on some other device.. like an android phone or tablet. That's how I got it downloaded and had clean installed. Hope this helps.

EDIT link: Windows 10 ISO

31 more replies
Relevance 63.14%

Hi folks,
When windows 10 was first released I downloaded it and burned to DVD using the media creation tool from Microsoft.
As windows 10 has now had a major update, and I want to create a DVD with that update on it, without having to reinstall it later, as I have other partitions on my computer to update to 10 as well.
So my query is, does anyone know if I was to download windows 10 32 bit from Microsoft again (using the media creation tool from Microsoft) will it include the latest major update to 10?
Thanks for any help

Answer:Is windows 10 latest big update included in latest media creation tool

Microsoft has made available a download able iso for win 10 1511. If you don't see download link on win pc then try on some other device.. like an android phone or tablet. That's how I got it downloaded and had clean installed. Hope this helps.

EDIT link: Windows 10 ISO

31 more replies
Relevance 62.73%

My bios version is J01 V02.24 When I check on the HP bios downloads I see there is a v02.29 available. But when I try to download and install the install assistant says it may not have installed, try again. When I try again, I dont get a message at all. But if I check system bios is still shows v02.24 I dont understand how to flash the bios and am apprehensive about messing the bios up. Is there a utility that checks and updates or any other way for the novice to upgrade bios without blowing the computer up? Appeciate any help or advice on this. Below is my system bios settings, if that helps any. 

More replies
Relevance 62.32%

Hello
 
i have the same notebook DV6700 entertainment....FF751EA#ABU
 
have windows 10 32 bit running ok....does the same caveat apply to windows 10 as 7 re bios update ?
 
andBIOS TypehoenixBIOS Date:March 22nd, 2011BIOS ID:F.34BIOS OEM:F.34Chipset:Athlon 1100 rev 0SuperIO:UnknownMake/Model:Quanta HP Pavilion dv6700 Notebook PC
 
Have F34 also, are there any newer updates, also can't find driver downloads for this notebook under vista..
 
thanks
 
if if I can and do decide to reflash the bios, is there an emergency USB boot I can make to reflash the orig bios in case it fails
 
 

Answer:Latest bios update help (dv6700)

Hi, @Reddwarf4ever : Yes, I would imagine if the BIOS update bricks the notebook on W7, the same would apply to W10 as well. You already have the latest BIOS installed which is F.34, so you don't have to be concerned. http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-dv6800-Entertainment-Notebook-PC-series/...  

5 more replies
Relevance 62.32%

intel Houston motherboard GA 6WMM7 bios update so my machine will run win 2000. I see from one of the posts the latest is 3 OY but the link goes to Acer computers

Answer:want the latest bios update mine is 3 OC

Why do you need a BIOS update to run Windows 2000?"intel Houston motherboard GA 6WMM7"The GA should be a dead giveaway. It's a Gigabyte board. Did it come out of a Packard Bell? If it did, do NOT use the Gigabyte BIOS.http://www.gigabyte.com/search/sear...http://www.uktsupport.co.uk/pb/mb/p...

8 more replies
Relevance 62.32%

Right... So here I am trying to perform miracles with a XFX/NVidia board again. I'm running out of hair to pull out, but I can't afford to get another one right now.

I'm sure the whole world knows that XFX and NVidia aren't buddies anymore, and I know that XFX skimped on the processor TDP ratings to 'save money', but I'm not sure if this problem is a faulty BIOS from XFX or if my chip is failing.. Anybody else still running this board? Perhaps someone can give a second opinion here...

Currently I'm running the v1.6 BIOS, the latest is v1.7. My PC doesn't have any problems with 1.6, I was just trying to see if I could get a Phenom II 740 BE to work on this board. The BIOS flashes without any problems, no errors or warnings or suspicious beeps.. But then the two-digit diagnostic LED on the board goes haywire with 1.7, with 1.6 it shows normal alpha-numeric codes, but on 1.7 the lines are completely mixed up and don't make any legible numbers or letters.

I must admit, other than that, I haven't found any problems.. My 740 BE still didn't work, but I'm not sure if that was also because of the BIOS or not. Has anybody else perhaps tried this BIOS yet...? If not, and you're comfortable with it, could you try it and see? I had no issues flashing back to 1.6 after trying 1.7, so you don't have to worry about being stuck on it if you don't like it...

Answer:XFX 750a SLI - Latest BIOS Update

I just flashed my motherboard (xfx 750a sli) to latest version 1.7 and I am having the same problems with the LED. I also think that my SATA devices have been disabled. Only my IDE drives are recognized. I created a support ticket on MOBO site but no response yet. I was wondering if you could send me the 1.6 ISO so I can reflash my system. Thanks.

9 more replies
Relevance 62.32%

Hello, I have recently upgraded my OS to Windows 7 on my Pavillion Notebook, which is a dv6700, with product number KW097EA#UUW, and with an AMD processor. Its bios version is F.34, and I would like to know if it's the latest bios. Unfortunately I cannot find my computer model on the website, so I'm needing your help. Also, will the latest bios allow me to install more ram? I currently have 2GB.













Solved!

View Solution.

Answer:Latest bios update help (dv6700)

Hi: Yes, F.34 is the latest BIOS version and if you have that installed, good. I am going to save you from having to strip your notebook for parts and tossing it in the trash if you try to flash the BIOS after you installed Windows 7. DON'T FLASH THE BIOS IF YOU HAVE INSTALLED WINDOWS 7. There will be a 100% chance of totally bricking your notebook if you do. Below is the link to the support and driver page for your specific notebook model. http://h10025.www1.hp.com/ewfrf/wc/product?product=3717145&cc=us&dlc=en&lc=en&os=228&query=KW097EA&sw_lang=&tool= As long as the BIOS in your PC is at F.27 or newer, there is no reason that you can't install 4 GB of memory in your notebook right now. I have a dv6810us with the same hardware as yours and I am running W7 64 bit with 4 GB of memory (2 x 2GB of PC2-6400), and it works just fine. If you ever need to flash the BIOS (which you shouldn't ever need to), you will need to reinstall Vista, flash it, and reinstall W7.

8 more replies
Relevance 62.32%

I'm reinstalling my operating system and would like update the whole laptop, but I cannot update my BIOS. I downloaded the latest release (B2.90-WIN-EC1.90) but it keeps telling me that this computer is not supported. What can I do?

I used the notebook detection tool on the website and 'm currently using Windows 7 Pro x86 with BIOS v2.30.
Toshiba Tecra A11-11J (PTSE1E-00E00EDU)

Answer:Re: Tecra A11 - Cannot update latest BIOS

Thread can be closed, I solved the problem by installing the Value Added Package. Which enabled the BIOS setup to execute.

2 more replies
Relevance 62.32%

Which the last version of bios with ati?

My laptop
M40-231 ( PSM40E) ati x600.

Regards,
Michel Marinho

Answer:Need latest BIOS update for my Satellite M40

Hi

The Satellite M40-231 = PSM40E.
This number you should find at the bottom of the unit. Check the label.

For BIOS you should check this site:
http://www.toshiba-tro.de/subpage/bios.html

I have checked it and it?s a BIOS v1.7

1 more replies
Relevance 62.32%

I keep getting the following error message when it is installing the Bios Update:  C2-Error:  Region is write protectedAnyone know how to fix this problem?

More replies
Relevance 62.32%

hi all i have an asus crosshair mother board and was told my bios is 2 years old i used the tool asus update but come up no bios updates.
bios at the moment is version asus crosshair acpi bios revision o5o2
just hope u can put my mind at rest
 

Answer:not a problem as such (latest bios update)

Check the Asus site for updated BIOS's. Or click here and click on BIOS. Note there are two newer BIOS's than your original one.
 

3 more replies
Relevance 62.32%

I have a V5-122P with BIOS 2.02.  I would like to update the BIOS but must first update to version 2.06 but cannot find a file to download.  Any Suggestions as to where I can get version 2.06?

More replies
Relevance 62.32%

i have bios version f.22 Rev.A already installed on my notebook. However i was wondering if i can install the latest verison provided by hp which is f. 63 Rev.A on my notebook. The supported version in drivers and download for my product is f.22 but i wanted to know if i can install the new bios on my notebook.  here is the link for the bios that i am talking about: http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_169818_1#tab-history  

More replies
Relevance 62.32%

hi, i'm new here.. n i'm planning to buy this netbook. i just wanna make sure one thing. is the latest bios update for s10-2(ver. 1ACN21WW) has SLIC 2.1 in it ? coz i want to reinstall it with win 7. i read in internet, win 7 needs SLIC 2.1 in it's bios. pls gimme feedbacks about it.. n pls, anyone who had managed reinstalling it with win 7 share ur experience here.. hopefully, like a tutorial.. thx.. EDIT:i'm asking about this, coz i think i have to update the bios, if i want to install win 7.

Answer:[ASK] S10-2 : SLIC ver. in latest bios update

Hi and welcome to lenovo forum,the latest BIOS for S10-2 machine is 21 thats correct ...i prefer to Backup before you install other OS if you want to go back to factory install,after this you can easy install all OS you want ... all works wellWindows 7, or  Vista (iam not really prefer)  ... Linux in many variations ... and naturally XP ... sincerely KalvinKlein-------------------------------------------------------------------------------------------------------Want more ? For further information to get the most of your S-Class machine Lenovo Energymanagement  Backup Windows 7   Install help Windows 7 Official Driver Clean XP Install XP Startup Small WebCam Guide Lenovo Easy Capture 

3 more replies
Relevance 61.5%

I have an A660 (PSAW3A-07P00R) and am having trouble with later NVIDIA drivers under linux.

There has been some suggestion that the problem that I am having might be addressed by a BIOS update.
I currently have BIOS firmware version 1.9 Is there a later update for the A660 PSAW3A-07P00R?

If so, where might I obtain it?

Answer:Re: Need latest BIOS update for my Satellite A660

Latest BIOS updated are always offered on official Toshiba support page so if you cannot find it there probably it doesn?t exist.

As far as I know Toshiba doesn?t offer any kind of Linux support so all offered stuff is for Windows. All offered BIOS updates are WIN versions so it can be started under running Windows OS and I don?t know how you can do it using Linux.

4 more replies
Relevance 61.5%

Hello,

My computer is a Satellite L10-PSL10E.
The Bios is Phoenix V1.60 dated 21/12/04.
There is a new Bios (v2.80-WIN dated 8/7/07) available on the Toshiba web site .
What is new in that version?
Does it allow to boot on an usb external hard disk or an usb key?

Is it recommanded to install updates if everything is working fine on the computer?

Answer:Need some info about latest Bios update for Satellite L10

If everything works well you don't need new BIOS. Be happy with well running operating system.

If you want to bootup from external HDD to use other operating system it will not work.

1 more replies
Relevance 61.5%

Hello all, The latest BIOS update looks like it is targeted for units with an i3 6006U cpu: Summary of changes==================General Information:1KCN28WW:1. PCR: new CPU(i3-6006U) support:(1) Fix S4 stress issue2. Checksum: 1KCN28WW.IMC -0x5465E40A- (by sum.exe) Now, since my unit has an i3-6100U, does anyone see any need for me to install this BIOS update? Thanks, newlaptop

More replies
Relevance 61.5%

Talk about confusing. I looked at the latest BIOS update documentation and this is what it says:
 Title: Dell XPS 15 9550 1.2.15 A16 System BIOS
 Subtitle: XPS 15 9550 1.2.18 BIOS
 Version: 01.02.17, 01.02.17
 File Name: XPS_9550_1.2.18.exe
I assume everything should say 18?
JohnD
 

More replies
Relevance 61.5%

After upgrading to the latest BIOS version FWKT86A provided here; https://support.lenovo.com/us/en/downloads/DS105487 I now recive the following error at every boot; (A7) Me FW Downgrade - Request MeSpiLock Failed  The boot process continues and Windows starts normally, but how do I fix this error message, I can not deploy this BIOS upgrade to all my systems with this error message present. Please provide me with a fix or an updated BIOS that fix this as we are rolling out updates to mitigate the "Spectre" and "Meltdown" issue. What I've tried so far;I've tried to downgrade to the previous BIOS version (FWKT7FA) that I was running before the upgrade, but the issue did not disapear.Upgraded to the latest version again, issue still there.Tried to re-apply latest Intel Management Engine Firmware (11.8.50.3425), issue still there.

More replies
Relevance 61.5%

i wanted to reinstall  windows from an usb stick made on my computer but can not boot from usb i have tried setting up the bios first boot on efi USB  but even later of use the boot menu on novo  shortcut do not appear the booteable usb  on boot menu i have tried with 3  usb sticks and do not get the usb  boot and the most strange thing the set ups that  made on the boot  part on the bios do not get saved and     i link this glitch with the fact that recently i  reinstalled windows and also used the lenovo driver  update service which also contained an update for the bios . best regards Francisco

More replies
Relevance 61.5%

First of all why are there so many BIOS updates in a short time? I get my brand new L40-17S (20/05/08) with the BIOS 1.70, the Tempro software from Toshiba give me the warning to update it to 1.80 that works fine, after a few day's a new warning update it to 1.90 and now 2.00 in June! The problem is that I can't update anymore above 1.80, when I click on the winflash.exe only a short screen and then nothing.

Operating system Windows Vista 32 without SP1

I really want to have the latest BIOS before I install SP1.

Answer:It is impossible to update the latest BIOS for Satellite L40-17S

> First of all why are there so many BIOS updates in a short time?
Who knows? seems Toshiba releases the drivers and BIOS like the Microsoft own Windows patches? do you known a ?Microsoft patch day?? ;)
I think it?s something similar?

Another question;
Is there something wrong with your notebook?
If not, so why a BIOS update?

I?ve got a notebook which is about 3 years old and there are newest BIOS updates for my notebook but I have never done a BIOS update.
It?s not necessary because the machine runs troublefree

3 more replies
Relevance 61.5%

Hi, can anybody tell me which is the latest possible BIOS version for Satellite L300 11M? The drivers page only gives me v.1.50 as an option, but I see that other L300 models have ver. 2.20. Can I use 2.20 for L300 11m or download some other version from somewhere?
The reason I ask is that I want to try to update my CPU. Yes, I know it's not recommended, but as long as it is possible, I want to try. However, I've been told that my laptop model BIOS will only recognize CPUs with up to 3MB cache. That's why I need more up to date BIOS.
Any ideas?

More replies
Relevance 61.5%

I bought windows 8 .1 machine from factory. Then I had local shop install 8.1 on larger ssd. I just performed latest bios update and now machine will not boot. I am sure this is uefi related but I am not knowledgable in that area. The boot parameter returned to me by the shop was "legacy only" and secure boot was disabled.













Solved!

Go to Solution.

Answer:X240 will not boot after latest bios update

When you say "will not boot", can you let me know exactly what happens?
Does green LED on power button come on?
Do you see the ThinkPad logo screen?
Can you press F1 to enter BIOS setup?
 

8 more replies
Relevance 61.5%

I want to update my BIOS to the latest version but its soo complicated.

The Asus Update tool is the most disfunctional piece of crap i've ever come across and i've been to the Asus site and downloaded the updates ut dont know how to work them.

I havent got a clue how to do it.

Anyway, i've also had trouble determining my currrent BIOS version.

In my BIOS, it says...

Version: 08.00.09
Build Date: 08/03/04
ID: A0058002

It also says at the bottom...

V02.54 (C) Copyright 1985 - 2003, American Megatrends, Inc.

And in dxdiag window, it says...

BIOS: Rev2.00

Now for f*ck sake, what the bloody hell is that all about???

Anyway, could someone link me to the files I need to update my BIOS to the latest version and how?

Thanks in advance :slurp:



K8V SE Deluxe
Windows XP Pro
 

Answer:How do I update my K8V SE Deluxe BIOS to latest version???

not an answer but after this you'll feel better

I followed the complicated steps.

I'm pretty sure I had the right .rom file, And I'm pretty sure I did everything correctly.

Too bad that the system doesn't start at all...Oh the fans turn on. but screen stays blank.

Now I'm wondering is there anything more I can do...or should I just toss that mobo to trash...

Do-It-Yourself. Yay! :unch:
 

3 more replies
Relevance 60.68%

HI every one

i have laptop
Model A660-17M
Version PSAW3E-06P00WAR
Bios version 2.30

And every time i run bios agent plus program he show me that there is a newer bios update
and when i check Toshiba drivers he show me the same bios update that i run it now

Look to this photo i took it from bios agent web page
[http://store1.up-00.com/2014-08/1407327946181.png]

i hope you can give me the latest bios update

Answer:I need the latest BIOS update for Satellite A660 PSAW3E

>And every time i run bios agent plus program he show me that there is a newer bios update

The ?bios agent plus program? is an 3rd part software and not Toshiba certified application.

Furthermore the all latest BIOS updates for Toshiba EU notebook models can be downloaded from the Toshiba EU driver page.

I checked this page and the BIOS 2.30 is the latest BIOS released for this model and this means that your BIOS is already up to date.

Lat but not least Toshiba provide own sofware called Toshiba Service Station and this tool notifies you about the real latest updates

1 more replies
Relevance 60.68%

I started BIOS update from TEMPRO.
After 39% updateing it just froze for hours.
I rebooted and now i have black screen, no activity at all!
Keybord lights work and also powwer button, but nothing more!!
Anyone with same or similar problems?
I suspect my BIOS is crashed and i needv to reflash or re install somehow.
Can't find anything about recovery BIOS disk or some kind of help from INSYDE or TOSHIBA!
Anyone with same problem or similar that have some ideas what to do?
Thanks

More replies
Relevance 60.68%

Few months back I got a Lenovo ThinkPad P40, it has been working just fine untill the latest BIOS update from Lenovo Companion (R05ET72W 1.50).  Since I use it for work, it is connected to power all the time. I have disabled Sleep & hibernation when plugged-in. When I leave the workstation, I usually just lock the machine (Win + L), so that I can access the laptop from home.  After the latest BIOS update, when I get back to work in the morning, ThinkPad does not wake up no mater what button I press. Opening the lid, shows a black screen, does not respond to anything. The red light on the "ThinkPad" logo is lit.  All I can do is hold the power button for 5 sec and re-power. This is horrible, as it will sonner or later corrupt my Windows installation.  I've had to do this now 3 days in a row, after the BIOS update.  I've updated all drivers and ran Windows 10 update. The EventViewer shows only this:"The previous system shutdown at 5:56:01 AM on ?11/?5/?2017 was unexpected." But I ran the force shut-down at 8:30 AM...

More replies
Relevance 60.68%

Has anyone with this board tried this bios update? I believe the version # is 2205. Is it mainly important just for upgrading to the new 5th. Gen. processors or, is there benefits for the 4th. Gen. i7 4790k also? Thanks!

Answer:latest bios update for asus z97-a motherboard Questions

I own the Asus Z97-A motherboard and my instruction manual says not to upgrade the BIOS if my system is running smoothly. The manual clearly states to upgrade BIOS only when you have to, thus I have never upgraded my BIOS.

5 more replies
Relevance 60.68%

I have a Dell XPS 9550 laptop, and I've recently made two BIOS updates. The one 1.3.something, and now I have 1.4.0
They both had the same terrible issue.
It seems like the processor cooling policy is completely broken.
My laptop's fans never go to silent mode now. They always run, with pretty high speed and noise. Even when CPU is totally idle, or loaded on about 1-5%
Before these updates my Dell never ever turned on the fans with this kind of CPU load, staying completely silent.

If this is BIOS's issue, I'd like to ask Dell engineers to fix it and push new update.
If there is anything I can do myself to fix it, I would highly appreciate any help.
Thank you!

Answer:XPS 15, latest BIOS update ruined the cooling system.

Below are what those two BIOS addressed. I do not see anything specifically dealing with cooling.
XPS_9550_1.4.0.exe9/15/171. Fixes system defense with wireless parameter will cause ME failure2. System stability enhancements3. To prevent user update ME Firmware to blacklist 11.6 ME firmware 4. Correct error message in Excalibur5. Fix Bitlocker issue on Win7 ultimate/enterprise
XPS_9550_1.3.0.exe8/28/171. Enhance dock's audio performance
You can try to down flash to 1.2.29. But, the system may not let you. It might say you have a newer BIOS and not allow it. Give it a shot.
XPS_9550_1.2.29.exe8/1/171. Fixed a potential security issue with Bootguard code integrity chaining enforcement".2. Fixed a potential security issue with the Support Assist PreBoot feature3. Updated processor microcode4. Update Computrace 9575. Support Win10 RS2 Enterprise6. Enhance NVME support and reduce noise

1 more replies
Relevance 60.68%

Hello. I'm trying to update the vulnerable TPM firmware as described here:https://support.lenovo.com/us/en/product_security/LEN-15552using this package:https://pcsupport.lenovo.com/us/en/downloads/ds501051 I've already updated BIOS to the latest 1.87 version for now, but the TPM Firmware Update Utility still shows the following message: "Current BIOS does not support the TPM firmware update. You have to update BIOS to the latest version."The following message is also available in log file: [2017/10/18 19:22:55] TpmUpdt64.exe version 1.0.0.0OS = Windows 10 64bitChecking TPM status.TpmFwChk TpmStatus: 1TPM Manufacturer: InfineonCurrent TPM Firmware Version: 7.61Error : Current BIOS does not support TPM firwmare update. Error code = -4 Currenlty I'm using Windows 10 x64 Build 15063.674

More replies
Relevance 60.68%

I recently updated the BIOS on my z30c pt263e as per advice from the toshiba update application installed on my PC.

Since that update, my LAN (wireless) and bluetooth have been behaving abnormally, including:
Connecting to various wireless networks, but not being able to access the internet. In order to do so, I have to do a wireless troubleshoot in windows, which resets the wifi adapter, then it works againIf I switch between networks (say a wireless, to a hotspot wireless on my phone) it does the same thing. Will connect to the network, but not access the internet, necessitating the same resetBluetooth has started to work abnormally at the same time, including saying my bluetooth keyboard is paired, but it won't recognise any input from my keyboard.

I've since downloaded and reinstalled both the LAN and Bluetooth drivers from the Toshiba website. This has NOT fixed the problem.

If toshiba is not aware or not going to do anything about this, can someone please post a link to the previous BIOS version (which isn't available when I search on the EU support site) so I can at least verify if it was the BIOS update causing the problem

Answer:Portege Z30-C Latest BIOS update causing LAN and BT problem

Could anyone post the immediate prior BIOS for z30c PT263E. The one recently released (24 January) seems to have resulted in me having new Wireless networking, and bluetooth problems.

1 more replies
Relevance 60.68%

hi, i have a lenovo b590 laptop (20208 type) with i3 3110m and nvidia gt720m and whenever i try to update the BIOS using the latest BIOS version available on the lenovo drivers download page , i get the following error: https://i.imgur.com/lKMLQV9.pnghttps://i.imgur.com/OkY9aQy.png this is the actual BIOS version on the laptop: https://i.imgur.com/1Tvib3d.jpg  how can i update the BIOS on it? i guess the problem is that the allready running BIOS is H1ETXXXX version and on the lenovo drivers download page is only the H9ETXXXX version which i guess isn't compatible with the 20208 version of the laptop and shows the "machine does not match with this bios" error. forgot to mention that my OS is windows 7 x64 on which i tried to run the bios update.  also will this laptop model gonna receive any new bios updates especially regarding the newly discovered intel security flaws or it's completely abandoned allready in terms of support?

More replies
Relevance 60.68%

Hi everyone,I have a severe problem (I guess) after the latest BIOS Update. Windows 7 freezes during startup.I own a 64-bit Lenovo FLex 2 15D with AMD A6-6310 and R4, 4GB RAM and a SSHD (8GBSSH). I purchased it without OS and installed Windows 7 - which worked fine so far.I yesterday updated the BIOS with version 9FCN23WW (for Win7 and Win8), the latest BIOS update. A mistake, it seems.After Reboot, I first had to disable Secure Boot in the BIOS, because it would not let me boot at all. I figured out how to get into the BIOS-Setup to disable this (press Enter 2x, press Tab when in the Boot Menu to access the "Apps Menu", then "SETUP" - just in case this helps someone).Now Win7 begins to start up, but freezes during the startup process (the splash screen with the win flag freezes and looks a bit strange. I used the "protected mode" Windows Startup and saw that the process always hangs when loading "amdkmpfd.sys".That is basically it.I guess I have to find a way to re-install the previous version of the BIOS, but I have no idea how!Any idea?!.......Now about what I did to fix this (poor, but I tried):If I try to start from a Win7 installation CD-ROM (actually it is one for Dell PCs, but I guess that is not the problem) and press a key to boot from CD, Windows loads files, shows "Starting Windows"  and at a certain point again just freezes. When I -do not- press a key, WIndows Boot Manager shows up and mentions that "Windows failed to start (etc.)" "File: \EFI\Microsoft\Boo... Read more

Answer:Boot Fail after latest BIOS Update on Flex 2-15D

I found our the solution to my problem with the help of SebastianLenovo ... In the BIOS / Boot Mode, I switched back from "UEFI" to "Legacy". That's it. That simple. The BIOS Upgrade routine just did not transfer that setting from the old BIOS to the new. Given the fact that 1. I did not change that setting, so it is default and 2. it would have been easy to avoid, if the BIOS update routine would be well programmed to transfer the current BIOS settings to the new, upgraded BIOS ... Anyway a strange situation that a 64-bit system has a 32-bit BIOS. Actually no Linux distribution (except FatDog and rescue systems) are able to deal with it - Linux only running as a Virtual Machine under Windows. I think this is inappropriate and really taking away a part of the fun if you can not run this laptop as a dual boot system. Thanks to Sebastian and I hope this solution helps someone in the future... Regards, Tristam.

2 more replies
Relevance 60.68%

After successfully updating my BIOS with the latest from HP I completely borked the BIOS by fiddling around with the settings. Push 'power on' 6 long beeps no video. Then a thought came back from the dim recesses of my mind from the dawn of time...that is about 5 years ago. I carefully(!) pulled the side cover of the machine and extra carefully removed the CMOS Battery (CR2032) and let it sit for 5 minutes. Reassemble, power on, successful boot. Remember this trick so you can tell your great-grandchildren...no wait they'll be quantum computing by telepathy...hmm.

More replies
Relevance 60.68%

Hi,The same situation on three computers WITHOUT rear fan.After bios update to latest version (02.46 Rev.A) I reciving on every boot error 512-rear chassis fan not detected.So, the problem is definitely with bios, anybody have similar problem?

More replies
Relevance 60.68%

I am wondering how to process clean instalation of Windows Vista after my bios is updated to 1.20-1.01.In the latest official graphic driver update manual it is wrtten to install graphic driver before updating the bios.During clean install in my case I will have to install this graphic driver over bios 1.20-1.01 what is against the previous manual.Any suggestions are welcome. 





W500, 4058 CTO, W7 x64 Clean Install, ATI CC 10.8, discrete graphics only, latest bios and drivers.

Answer:OS clean installation process after latest Bios update

Hi Northmilo,  Read this guide line by line until you understand it first.Then read the Clean Install Guide (Works for 32-bit or 64-bit) yet again then begin. By reading first you will learn how to walk before you can run, by implementing these processes.        I hope this helps youMessage Edited by Manuel_A on 01-29-2009 02:55 PMMessage Edited by Manuel_A on 01-29-2009 03:22 PMMessage Edited by Manuel_A on 01-29-2009 03:23 PM





Lenovo W701 | WUXGA RGB-LED-BL | Intel i7-920XM | Nvidia FX 3800M | 16GB RAM @ 1333MHz | Intel X25-M 160GB MLC G2 | 500GB @ 7200RPM | Compact Flash (PCIe) + Express Card(34mm) | BlueTooth W/ Antenna |Intel Ultimate-N 6300 (3x3) |

3 more replies
Relevance 60.68%

This post is primarily focused on Fruitbat because he posted the link which has taken me to this point in my saga but anyone is welcome to join in especially if they have a knowledge of Dos.
Fruitbat,
I followed the instructions in the link you posted and successfully booted from CD and while in Dos told the computer to open the BIOSUPDATE. EXE file. I then got a long list of type which appeared to be lots of instructions for example "update microcode". It finished with a list of four options the last one being: answer YES to any prompt. I presume these instructions were not meant for my immediate use but were part of the update. Then everything stopped. I did not know what to do next. How could I get those instructions up and running? After a while I tried typing 'yes' but it just moved to the next line: nothing happened. So what I need to know is what response do I need to give to make the programme execute all the instructions it listed?
When copying the files onto the boot disc I only copied BIOSUPDATE.EXE. I noticed there was an Autoexec batch file which I ignored. Should I have copied it to the boot disc as well. I just feel I am close to resolving the issue, it is just that I lack the final expertese.
Can you help, Fruitbat?

Answer:trying to Update Bios without Floppy drive: the latest story

Anyone?

10 more replies
Relevance 60.68%

There's a BIOS update for my Yoga 720-15IKB, dated 01.08.2017, version 4MCN23WW: http://pcsupport.lenovo.com/de/de/products/laptops-and-netbooks/yoga-series/yoga-720-15ikb/downloads... The changelog says: 1. Update MCU to M2A906E9_0000005D_0000005E.
2. Modify SAMSUNG MZVLB512HAJQ-000L2 CTLE value.Can anybody tell me what that means? Would be much appreciated! 

More replies
Relevance 60.27%

I was unable to find any official BIOS update for Lenovo 3000 G410.Only eSupport offers BIOS update for my laptop but for USD 30, and I am not sure they dont request money for nothing.Is there any OFFICIAL BIOS update?  

Answer:Latest BIOS update for Lenovo 3000 G410 needed

A search on the lenovo site seems reveal that BIOS update is not available, see link below.   http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-68891 If you have Phoenix BIOS, you can try the Phoenix official website if there is any BIOS update 

2 more replies
Relevance 60.27%

Hi all, after installing the most recent BIOS update via ThinkVantage System Update, the DVI port in my T410s does not work anymore. Nvidia and Intel display drivers are in place, and I also checked the BIOS settings, but to no avail. It appears that the DVI port is no longer recognised by the system at all. Thanks and cheers!

Answer:DVI port not working anymore after latest BIOS update on T410s

Do you mean the DVI port on the docking station?

2 more replies
Relevance 60.27%

Hello. I have ThinkCentre A70-7099-S3A. Flashed the BIOS to the latest from here : http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_bios/9cjy11usa.exe Extract it and flashed it with AFUDOSthe command is : afudos IMAGE9C.ROM /p /b /n /c /x flashing donereboot and my pc beeping twice every boot up into first screen (black bios screen)and can't identify machine IDalso show "FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF" on UID?? but its fine on entering windows 7 please help me bout thisdid i do something wrong on my flashing? regards.raditz.

Answer:ThinkCentre A70-7099 bios update latest, can't detect machine ID

I think your problem is twofold. You used a third-party non-supported flash utility, and you used the windows flash file. Download the CD rom image BIOs update from the Lenovo webstie, burn it to a disk and reflash your system. It will ask you if you want to update the machine type and serial number, answer yes and enter the information as it appears on the case of the A70.

2 more replies
Relevance 60.27%

Hello all,

Since the latest BIOS update fro few days ago my laptop stopped entering to sleep mode, before the latest BIOS update everything was excellent.
I will appreciate any help with this issue.

Thanks all...

More replies
Relevance 60.27%

Hi

Due several problems encounter with update Satellite P100-221 (PSPA6E) Toshiba launch on internet second BIOS update. I download it and I solve problems with my video card and missing keyboard stroke. After a short period they put on drivers page 3 rd BIOS update.

I try to find what ever they change with this new update, but I didn???t found anything. So I decide to update my BIOS again. Now like result my system crash very often when I shut down & restart my computer (blue screen).

Microsoft advised me to reduce video acceleration from video setting.
Maybe someone can explain me why I have this issue?
I use same drivers and software same like in second update
Can I find previous BIOS to rewrite it again, because that one works great with my laptop?

Thanks!

Answer:After latest BIOS update Satellite P100 crashes with BSOD

Which one you uesd before, 1.7 or 2.1 version? I think you can down them in search engine. The lastest version is 2.4.

3 more replies
Relevance 60.27%

My original question was: "Is is absolutely necessary?"; however, see my predicated response below.  Sorry for the confusion.













Solved!

Go to Solution.

Answer:Latest BIOS Update for Lenovo 110-15ISK Type 80UD

Hello all, I actually was looking at an incorrect BIOS update whick was for a V110-15ISK (shown above); however, I actaully have the 110-15ISK Type 80UD laptop which has a different BIOS update available (dated 01/19/2017): Summary of changes
==================
General Information:

1TCN22WW
Added:
1. Update SATA EQ value of Seagate 2T and Hynix 128 SSD for HW request.

Modified:
1. Workaround disable ODT training Fix Hynix DDR4 4G can not power on issue form HW&Hynix solution. Now, from the description, it looks like this one may be necessary depending on the hard drive model and/or memory brand that is installed; however, I won't know for sure until my laptop is delivered. Sorry for the confusion. Cheers, newlaptop  

1 more replies
Relevance 60.27%

Hi im trying to flash my bios, I need either the wps file or the iso file please help.

More replies
Relevance 59.45%

I have been trying to update the bios on my m93 running Windows 10.  I tried manually doing the install, and the using the system update utility.  every time It crashes, saying "afuwin.exe has stopped working" The event log says the following:Faulting application name: afuwin.exe, version: 0.0.0.0, time stamp: 0x593922fbFaulting module name: afuwin.exe, version: 0.0.0.0, time stamp: 0x593922fbException code: 0xc0000005Fault offset: 0x000016daFaulting process id: 0x1e08Faulting application start time: 0x01d374e8ff406dd1Faulting application path: C:\PROGRA~3\Lenovo\SYSTEM~1\SESSIO~1\REPOSI~1\FBJYCL~1\afuwin.exeFaulting module path: C:\PROGRA~3\Lenovo\SYSTEM~1\SESSIO~1\REPOSI~1\FBJYCL~1\afuwin.exeReport Id: bd417305-c60a-49c9-9842-356df40e9ef8Faulting package full name:Faulting package-relative application ID: I've tried multiple times, restarting, etc, and it keeps crashing.  Any suggestions?

More replies
Relevance 59.45%

I updated the BIOS yesterday and after using it today, i realised that the laptop was heating up, even though i wasn't playing any games. Just watching some videos on youtube using Microsoft Edge. The bottom side of the laptop, the one below the keyboard, felt hotter than usual. Same for the part right above the fan, one where the power button is. Never had an issue before the update as it never used to get hot enough for me to feel it unless I was playing a heavy game. It only gets better if I use the extreme cooling feature, but that shouldn't be the case for regular browsing. Could this BIOS update be the reason for my laptop heating up? Please help. 

More replies
Relevance 59.45%

When I push the mute button nothing happens (the little light doesn't turn on) and when I go into "Control Panel"/"Hardware and Sound" and click on "Lenovo - Microphone Mute" I get a message that says "Error - The service did not respond to the start or control request in a timely fashion." Any suggestions? Thanks.

More replies
Relevance 59.45%

Hi.About half a year ago, I bought the Lenovo ideapad 720S-14IKB. Since day 1, I noticed this problem where the mouse becomes invincible for a few seconds after I open a new tab in the webbrowser or start a new program. Here is a video of it: https://i.imgur.com/FSR05gs.mp4 Futhermore, after installing the latest BIOS update (4VCN41WW), the laptop has started to freeze for a couple of seconds on me every once in a while.  Are these, things that can be fixed by myself? Or should i talk to the store where i bought it about sending it to repair? I live in Denmark, so I have 2 years warrenty. 

More replies
Relevance 59.04%

Hi, After updating the Bios to the latest version (30CN71WW), Im facing issues with the Laptop. Most of the time, it will stuckup with the Bios Flash Screen. I need to press and hold the power button for few seconds and turn it off. Then It will stuck up with Windows Loading screen. Again I need to press and hold power button for few seconds. It will load windows correctly on the 3rd attempt. It is happening for few days after updating the bios. Request your help to resolve the issue.  Note: Laptop is still under warranty.Model Number: 59-051028 Thanks

Answer:Boot issue after installing Latest Bios Update(30CN71WW - Version 71) - Y560

latest bios is 71. re-flash the bios update.http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_list.aspx?CategoryID=661448

9 more replies
Relevance 59.04%

Hello, dear Lenovo users. Today, a few hours ago, I decided to update my bios via the following:http://mobilesupport.lenovo.com/in/hi/products/laptops-and-netbooks/ideapad-z-series-laptops/ideapad... After updating, the computer restarted and then suddenly something very unusual displayed on the screen: "Loading files.." with a progressbar, then afterwards the Lenovo logo showed up trying to boot into OneKey Recovery. I assure you that I had all the programs closed, and encountered no issues when I first ran this update. It automatically caused me to restart and began updating. How do I fix this issue? I have really important files in this laptop and I do not want to restore my data to its initial state. I do not mind restoring everything to the very beginning but I need my data for work.

Answer:Z510 - Latest Bios update caused automatic booting to OneKey Recovery

Oh dear. I managed to access the bios by spamming my F2 key, changing the boot mode from UEFI to Legacy, exiting saving changes and then it stopped looping into OneKey Recovery. Afterwards I restarted my computer and entered the bios, changed the boot mode back to UEFI and it still worked. Unusual, but at least it worked. Just incase if anyone encounters this issue as I did, this might help solve it.

1 more replies
Relevance 57.81%

Ever since updating my BIOS I have had issues with all my USB connected Diskdrives, these include thumb drives IOMEGA devices as well as a SSD in a drive toasted. ALl worked before the updates BTW, all of these device work in other machines also. I have tried different ports I have connected them to the ports on the docking station as well as the PC. THe USB ports work they just do not like disk drives at this time. I have tried all of the following: WIthin Device manager delete all of the USB devices , reboot and let them get re built. Witihin device manager do as above then delelte infcache.1 file from windows/system32/driverstore and then reboot, this requils the infcache driver still no good. Now I am considering usinag a older USB driver from the Lenovo webbiste. Mabe someone on this board can offer some additional suggestions, one that is not a option is re-install windows.  

Answer:W530 latest BIOS and other driver update issues specifically Error COde 10 on all USB disk drives

Try checking in a bootable Linux environment to see if it happens there. If it does, it's probably the BIOS, which you can revert to an earlier version. If it doesn't happen, try installing the latest Intel chipset package as found from Intel's Download Center.

3 more replies
Relevance 57.4%

I spent almost an hour updating my phone, it resets and the only thing it shows me is my internet symbols, battery, back arrow, home button, and search button. The rest of the screen is black, no apps no wallpaper. my lock screen wont even work. tried to factory reset and that didnt even work, and whats worse is windows mobile support is for some reason closed on weekends, any ideas, at, all?

Answer:The latest Windows Nokia Lumia update (I assume the windows 10 update) broke my phone, how can I fix it?

Which model? What instance of OS you were running before update? Do U have installed insider app? Are U on slow or fast ring?
However you should Install WPRT and rollback to 8.1?

2 more replies
Relevance 56.99%

I am trying to get this Yoga 14 up to date.  First, I was surprised that runs Windows 10 home vs. pro but that is what it is. However here is my question. The bios on the unit as shipped is 1.2 and is from the JFET43WW family. The latest bios listed is 1.3 from the R05ETxxW family (per the readme) and the filename is r05uj03ww.  Perhaps this is Lenovo's way, but all the prior bios history for that family is under JFETxxWW. Is this the right bios? The latest NIVIDA/Intel driver listed states that " *This driver can be only used on ThinkPad S3 Yoga 14 Broadwell(BIOS ID:JFETxxWW)". So.....can the latest video driver be used with the latest bios which per the readme (and filename) is NOT from the JFETxxWW family? Hopefully I am posting in the right place.  I have been underwhelmed with phone support where "hardware" support will only answer hardware questions and "software support" is "premium" and they want you to pay when this system is only a week old.  Not sure where else to go for answers.  Also have issues with expresscache as....well..they shipped it with windows 10 and with an SSD and no expresscache.  But that is another post.... Thanks, BJB  

Answer:Yoga 14 latest NVIDIA driver not compatible with latest 1.3 bios?

Exactly which ThinkPad Yoga 14 do you own please; 20DM, 20DN or 20FY? There are some different BIOS versions depending on which model you have and this may also have a bearing on other components.https://forums.lenovo.com/t5/ThinkPad-S-Series-ThinkPad-Yoga/Can-t-Update-BIOS-to-Version-1-3-Lenovo...

4 more replies
Relevance 56.17%

Hi, i wanted to know if there is any other way to update windows 7 to latest-present updates via offline / download standalone update installer ?

currently i'm using "monthly roll-up updates " which i understand that i've to install it one after another?
but some, day i've to taken care of many computer (clean install) it's taken too much time by doing so.
is there any install package to update windows 7 to the latest updates to make it 'present' as possible without using windows update (online check for update).

thanks

More replies
Relevance 55.35%

I downloaded an optional update for my laptop wireless connection this morning (there seems to be one every month for the Realtek Wirless LAN). My wireless connection now no longer works despite everything. I assume the best thing to do is use the pre installation system restore point?

Answer:Latest Realtek Wireless Update via Windows update

Yes, Realtek are not great @ writing drivers. Good hardware requires good code. They have the same issues with the high def. sound drivers.

10 more replies
Relevance 55.35%

Hello everyone I have a problem updating my windows to version 1703 (Currently on 1607). What happened was on my PC there was an update available and decided to update after it restarted I got the screen "working on updates" So I decided to leave it there for a while and did something else when I came back all I saw was a black screen the PC wasn't like restarting or anything. I waited 30 minutes and nothing has changed just black screen so I decided to force turn off my PC and turn it on again my PC was checking for repairs then went back to updating when it got to 87% the update just froze like nothing was moving at all not even the loading thing it's just literally froze I waited an hour and nothing so unfortunately I forced turned off my PC and it restored back to the previous version I look through the update history it says I have updated the windows 10 creators update privacy settings? which was the one I failed and I looked at the version I was and it's still 1607 (screenshots below) and when I try to update it says it's up to date. I am kinda panicking a little and was wondering why is this happening to my gaming computer.

Oh by the way I went to troubleshooting and this is what I got a lot of errors

Update:I ran troubleshooter again and got the same thing "Repair Windows Update Database Corruption" Dang this makes me more panicking. Honestly, I hope this really gets fixed

Answer:Windows Update Failed To Install Latest Update

Hi, just a note on that most recent update:
Upgrading to Creators Update requires installing KB4013214

It seems like the download failed.

Given your repairs, an excellent start, I'd suggest you do this by way of basic checks:
From an admin command prompt
[Windows key + X, click command prompt (admin)]
chkdsk C: /F
Your PC will need to restart.
Post back the result, which you can get after a restart as follows:
How do I see the results of a CHKDSK that ran on boot? - Ask Leo!
Make sure the result is clear or fixed- else do not proceed.

Then from an admin prompt run
sfc /scannow

and post the result (not the whole log).

I would recommend you MANUALLY download the Creator's Upgrade.

Why?
- it lets you create a useful bootable medium with some repair features
- you can use it to do a future clean install or in-place upgrade
- if the upgrade fails, you can repeat it without downloading again.
Download Windows 10 ISO File - Windows 10 Installation Upgrade Tutorials

Now, once you are happy with your disk and integrity of your Windows, please take this precautionary step:
Download and use Macrium Reflect (free) + its boot disk - and you will need a large external disk or similar
and create a disk image (in particular, option Windows Backup).

Then do the upgrade using the iso you have downloaded.
When you upgrade, disconnect any unnecessary peripherals, esp. wireless mouse.

If you end up with an unbootable PC you can then restore it exactly as it was.
Everyone who contribut... Read more

12 more replies
Relevance 54.53%

The latest bios update of X1 Tablet (Model:20GG) breaks the sleep (or hibernation) function. I found the tablet sometimes cannot be waken up by pressing the power button after entering connected standby. The version of the flawed BIOS is1.68-1.21 (N1LUJ30W) After rolling the embedded controller version back to 1.20 (N1LUJ29W), the problem no longer exists.

More replies
Relevance 54.53%

Microsoft has released a package of several updates ,some of them 15 M.B.'s in size ! They where not released as criticial updates however as important updates . Iam still on a dial up internet service and there is no way I can sucessfully download anything over 4-5 MB's without the download not completeing or being corrupt ! For now I have hidden all of the latest updates released . Also Iam having trouble with update KB979909 a 1 M.B. update that downloaded to my system howefever it will not install . How do I remove this update from trying to install everytime I shut down my PC ? Thanks in Advance to All,
NicRic

Answer:Windows Update latest update package ?

Also Iam having trouble with update KB979909KB979909 or KB979906 (.NET Framework update)?

5 more replies
Relevance 54.53%

Anyone doing a fresh install of Windows 7 should manually install SP1 (if needed).

The Windows Update Agent was renamed to Windows Update Client.

Manually requesting a search for Windows Updates on a Windows 7 computer with SP1 install should prompt the user to install a pre-SP1 Windows Update (WU) Agent (7.6.7600.320). Seems odd.

That old WU Agent worked just fine until Microsoft changed the update servers. The info coming back from the servers seems to now cause high RAM/CPU usage for some computers... but that old WU Agent should eventually get the job done. The computer might be useless for any other task for 24+ hours.

You can skip installing that old WU Agent and manually install the latest WU Client instead. Or, you can manually install the latest WU Client over top of that old WU Agent.

However, below is what I encountered when I went to install the latest Windows Update Client on a W7 pro 64bit SP1 computer.

I started by using these search terms in Google:
"Windows Update Client" "March 2016" "Windows 7"
As this post ages, replace "March 2016" with the current month/year.
If that does not find the desired KB, try the previous month.

That lead me to this link for March 2016: KB3138612.

The W7 pro 64bit SP1 computer has IE8 installed by default.

Visiting KB3138612 via IE8 got me this:


Clicking on the link to update the browser got me this:


Clicking on the link to "Continue to this website" got me... Read more

More replies
Relevance 54.12%

Lenovo Y580 Bios NOT updating. Stuck on version 2. Latest update on Y580 driver support page - 4.0.
 
Link to image 1
 
Link to image 2
 
Moderator note: images totalling more than 50k converted to links per forum rules:  Lenovo Community Participation Rules













Solved!

Go to Solution.

Answer:Lenovo Y580 Bios NOT updating. Stuck on version 2. Latest update on Y580 driver support page - 4.0.

What can I do to resolve this issue?

5 more replies
Relevance 54.12%

I download bios my elitebook 2570p which running windows 10 64bit on this link http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5284308&swItemId=ob_166366_1&swEnvOid=419...I run the installer, follow the wizzard guide, until the reboot button appeared. after i press the button, the notebook reboot but screen not lit up, just the keyboard leds were lit up.I pressed win + b button but with no luck, caps lock blinking, sometimes numlock also blinking.then i hard reset by removing battery and press the power button for 15 seconds, it become worse because when i plugin the charger, no sign of light charging.  Any help would be appreciated? Thank you very much

More replies
Relevance 53.3%

My setup is a 8100 elite sff mobo with a i3-560 and 2gb of ram (2x1gb). I connected a 80 gb hdd and it posts with all 2gb reported. However when i try and install windows 7 off a usb stick (i copied iso image on there for ease), it will load the files, open the windows logo....Then disaster! Stray lines everywhere and computer turns off with psu fans idling. Do I have to install graphics driver updates or firmware updates on the processor or??? Is it an issue with the ram??? (patterns of lines different with each open. Is the bios setup wrong??

Answer:Motherboard will post and has latest bios installed but can't install windows 7

Btw it also registers a pxe 2.1 boot 086 error as it posts. I can get into bios and setup easily.

14 more replies
Relevance 53.3%

Hi
Just tried to install the latest W10 as a boot with W7 on SSD , installation failed and now will not complete installation. Will not reboot and reinstall, and prevents access to the BIOS to change boot to CD?
Any thoughts, suggestions or experience?
Looking at disassembly to remove SSD data cable ( Lian Li Briefcase build complicates everything)
Thanks
Dave

Answer:Latest Build Windows 10 fail, wont allow BIOS access

Typically you can press a key combination to select boot source.. F12 on many systems.

Windows cannot disable access to your BIOS.

21 more replies
Relevance 53.3%

After i upgraded to BIOS 2XCN30WW(V2.05) dated 2017/06/21 i started to experience lags and temporary freezes (for 20/30 seconds and it would recover) while using windows 10 creators edition.The lag/freeze can be described as a period of time every 10 minutes or so in which the computer stops responding to keyboard input and eventually to mouse movements, if you had a youtube video or audio playing in the background it starts coming out distorted, everything makes you think there is something hogging the CPU or RAM, it recovers itself after 20 or 30 seconds, sometimes less than that.I first blamed Slack Client but quickly found that it didn't have anything to do. It didn't seem related to load as the CPU/RAM usage in Task Manager remained low during these periods.I then blamed a recent Windows Update patch , which i rolled back prompty without noticing any changes.My last option and what ultimately resolved the issue is the rolling back the BIOS upgrade that i applied at about the same time of the windows patch.I enabled the Allow Back-Flash option in BIOS setup and rolled back to version 2XCN29WW, and the problem dissapeared for good, and just to confirm that the BIOS was to blame after a few days of happy computing i decided to give the new BIOS another try and TADAH! soon after the update the freeze/lags started again.I just wanted to share this with you guys in hopes that if you are having similar issues you can resolve them using this message.And since Lenovo doesn't seem... Read more

More replies
Relevance 53.3%

can anyone tell me the latest windows security update (number and date) please and how I can check if I have it.

When I went to Update history online, I saw one for today but if I look in my add/remove window, it is not there.

I am set to receive Auto Updates and I did have the yellow shield in my ST but if I go to start/windows updates, nothing happens.

Am I right in thinking that I can have 2 browsers going, IE and FF but only receive windows updates when IE is open??
 

Answer:latest windows update.

if you use IE to get the updates it should just go and see what you need and then get them...you CAN use firefox to get the updates..go to this link and find the update you need and download it and just dbl click on it to install it

http://www.microsoft.com/downloads/Results.aspx?displaylang=en&categoryid=7
 

1 more replies
Relevance 53.3%

I've been lurking here for a while and learned a LOT from this forum. I have not had any problems worthy of posting til now. I have tried repeatedly to download the new windows updates posted today with no success. I get all the way to the "download and install" window then nothing. Cancelling the download locks up the computer and requires a reboot. Any ideas would be most welcome. I've turned off microsoft anti spyware and Spybot resident-no change. Thank you
 

Answer:latest windows update

Found the bits service wouldn't start. Search found that problem was related to a recent uninstall of Symantec. Found a fix that solved the problem.

Start- Run and type each entry below and hit enter:
regsvr32 oleaut32.dll
regsvr32 jscript.dll
regsvr32 vbscript.dll
regsvr32 msxml.dll
And in an attempt to fix possible problems with security providers I
also did the following:
regsvr32 softpub.dll
regsvr32 wintrust.dll
regsvr32 initpki.dll
regsvr32 cryptdlg.dll
 

2 more replies
Relevance 53.3%

I have just had an update, as per screenshot below. I have an ASUS X54C series laptop, running Win 10 Pro 64-bit.

Is this the latest update? It took a long time to download and install (I only have a 4Mbps ADSL connection), and I was worried that something had gone wrong.

Answer:Latest Windows update

Yes you have the latest update It was released yesterday.

1 more replies
Relevance 53.3%

I have just had an update, as per screenshot below. I have an ASUS X54C series laptop, running Win 10 Pro 64-bit.

Is this the latest update? It took a long time to download and install (I only have a 4Mbps ADSL connection), and I was worried that something had gone wrong.

Answer:Latest Windows update

Yes you have the latest update It was released yesterday.

3 more replies
Relevance 53.3%

After the latest update, my PC has been running like a dog (was rub in great before) and now when I open task manager, it shows disk use at 100% even though when you add up all the processes % it barely comes to 6%. Anyone else having this trouble or have any suggestions?

Answer:Latest Windows 10 Update

Click on Start | All Apps | Windows Administrative Tools | Resource Monitor. There you should be able to tell which process or application is tying up the disk resources.

3 more replies
Relevance 53.3%

Hi all!I have just a small problem, but I find it very annoying so, I thought I'd ask those that know!!My pc has just downloaded the latest windows XP update.My problem is that I now have a Task Bar and " my favourites side bar" are in a much bigger resolution of 800x600, but the actual screen remains at 1024x768. How can I change them back to there original resolution?ThanksBlack Strider

Answer:my latest windows update!!

Have you tried going into ControlPanel and adjusting the screen resolution? You may find that simply changing the display setting to 800 x 600 and then changing back to 1024 x 768 will do the trick.

8 more replies
Relevance 53.3%

I updated Windows 10 to the latest version on July 6, and then nothing worked. Nothing I click on happens--nothing! I can get into the files, so I see that the windows.old is there (until tomorrow!), but I have no idea where to start. Clicking start doesn't even work. HELP! I need to go back to the way my computer was before the update. May I please have step by step instructions?
 

Answer:Latest Update for Windows 10

14 more replies
Relevance 53.3%

Hello,

I have a 64x vista labtop (os) and today there was a 64x update. So I updated and bout 4mins or less blue screen, tested again, got blue screen. Did this multiple times. I decided to test if something just went wrong so I went into safe mode and uninstalled those 3 updates. No issues again. If anyone else is having this issue please feel free to say so .

-Runner

Answer:Latest Windows update 64x

there was 2 for me today. both installed fine

16 more replies
Relevance 53.3%

Anyone know what the latest Windows 7 (Home Premium) update was?

I have had no updates since 20 April for both Home Premium and Professional.

Says there are no updates available.

Seems unlikely ?

--

Regards,

Cheemag

Answer:Latest Windows 7 Update

For Windows 7, updates come out every second Tuesday of the month.

Please follow this guide here to perform a System File Check of Windows:

How to run SFC /scannow from Command Prompt - Tech Support Forum

3 more replies
Relevance 53.3%

Yesterday i turned on my pc and windows update started downloading an update which was very large, around 50 mb. It said it was Service Pack 3. I've just come round to my girlfrieds house, who has the EXACT same pc and software and she hasn't had an update. I went on the windows update website and it said there is no update available, and when i checked her update history, the last update she had was on the 11th August and it was a small update. Anyone know why she might not be getting it?

Answer:Latest Windows Update

There is no such thing as Service Pack 3.Scan for viruses click here

10 more replies
Relevance 52.48%

I recently reloaded xp on my computer to fix an error created by another piece of software. Since than I cannot get my system to accept security updates from Microsoft. The down load works, but I get an error that indicates none of the updates can be installed. I am currently missing 70 updates. I have tried to load one at a time in the event I did not reserve enough disk space, but I still get the same results. Do you have any ideas how this can be fixed.
 

Answer:Cannot load latest windows update

Try this website:

http://www.getautopatcher.com/

It allows you to download all the patches (about 300 MB) and install what you need. I have a security camera pc(vendor configured) that does not allow access to the windows update website and I used this tool to patch the system. Hope it helps solve your issue.
 

1 more replies
Relevance 52.48%

Hello dear windows 7 community.

I have some hardware related problems, I believe. But today I after I acquired new mob, cpu and psu. I started to doubt myself.
Here is a small overview:
OS: Win 7 x64bit freshly installed today for... 3 time(?).
CPU: Q9400
MOB: Asus P5Q Pro Turbo
RAM: 8gb of Kingston DDR2 HyperX PC8500 4GB KITx2
Graphics: XFX 5970 BE

All the latest available drivers and windows updates.
If I have an areo theme activated, launching Bad Company 2 may fail.
If I switch to windows basic and try starting Bad Company 2 it works just fine.
Alas for no reason what so ever when I tried entering uPlay (from ubisoft), I got a bsod regarding atikmpag.sys

So after a lot of google searches and thinking I came up with a theory, what if my problems are related to a windows update?
Since they started not so long ago, it must be one of the recent updates(?), but I have absolutely no clue which one it might be.

Answer:What is latest released windows update?

What do you mean with that Windows updates "started not so long ago"? Windows Update has been working since the day 1 of the early test versions, updates rolling out and being installed constantly since that.

Your problem is most probably non-working video drivers, at least that atikmpag.sys is a video driver file, and as such it seems your BSOD issues have nothing to do with Windows Update.

Kari

8 more replies
Relevance 52.48%

I no Ethernet, but I do have wireless. Everything was functional on the 9th November, and messed up after the 10 November update. I checked everything, and the pcs running Windows 10 don't have Ethernet but my Windows Server 2012r2 has Ethernet just fine. I had XFINITY check everything on their end. I tried Winsock reset several times but no change.
Any suggestions or ideas? This happened on one of the builds before, and it seemed after a lot of hem- hawing they fixed whatever they did.

Answer:No ethernet after latest Windows 10 update

Hi, one of many possible ideas.. (hope you've solved this by now).. try the driver you were using before the Nov upgrade. (Maybe you can roll back). The Nov. TH2 upgrade is a MS novelty item, as you know, being akin to a new Windows installation.

A number of similar instances are reported as you've most probably found.

If you need to use a different driver to the one prescribed by MS, you will need to protect it from update (see the tutorial section - link above).

0 more replies
Relevance 52.48%

Greetings All,Recently did a Clean Install of Windows 7 X64 on an HP DV7 and now My Windows Update will NOT work. It just goes searching forever / endlessly. I have tried and downloaded and installed a few KB Numbers (KB3083710, KB3102810 etc. ) to try and fix the issue with NO avail.  Yes, I am losing my Hair fast   Could  some one please help me with the Latest KB Numbers or Solutions I can try as of August 2016?  Any Help would be greatly Appreciated.Thank You in advance for your time.Best Regards, Rob 

More replies
Relevance 52.48%

Just posting to ask if anyone has had any system problems after the latest set of WU installs (10 June) ?

I had a couple o lockups today and ended up using a system restore to recover - I have re-applied the update and it seems OK so far.

The strange thing was that the system repair from the install disk identified my win 7 7100 as vista ultimate before actually running the repair

One thing I did notice was that this update reset my start screen to the default one

Answer:Problems with Latest Windows Update?

I am using 7201 x64 and everything seems to be fine for me. Then again those updates are not showing up for me in WU.

8 more replies
Relevance 52.48%

The last time I installed the latest Microsoft update ( a few days ago) I have since noticed that some of the pictures on web sites I visit and e-mails I get have been replaced with blank frames and little X's up in the corner. The most recent e-mail I received from an on-line dating service with my current matches had NO pictures of any kind on it, not even the name of the dating service. The only way I knew who it was from was the name in the FROM column in my mailbox. Does anyone have a clue what did this and how to fix it? Thanks for any and all help.
 

Answer:latest Windows update screwup?

Installing "service pack 2" has altered some of your email security settings.

Do This:
Open Outlook Express 6.0.
Click Tools, Options, Security tab.
Uncheck:
"Do not allow attachments to be saved or opened that could potentially be a virus".
Uncheck:
"Block images and other external content in HTML email"
Click Apply
Click OK.
 

1 more replies
Relevance 52.48%

Hello all,

I have had no internet on my laptop for about well...Maybe a month now (because of network problems which I have posted in the networking support section...no help yet though). And I haven't been able to update my computer with the latest update. I have heard that the update before this last one has caused people to have networking problems such as mine (Saying the wireless is working fine but won't load anything internet related).

So, my question is...Is there a way I can download the update package and use my memory stick to transfer it to my laptop to update my computer to see if it will fix the network problem that I am experiencing?

Thank you kindly!

Answer:Latest Update for Windows XP/Miscrosoft

I'm not sure if you can add all the updates to a memory stick, but it is possible to create a slipstreamed CD containing all the updates using your original installation disc. The instructions on how to do it can be found here.

13 more replies
Relevance 52.48%

Double posted sorry

Answer:How Do I Update To Latest Windows 10 Build?

Please don't double post.

3 more replies
Relevance 52.48%

Hey guys! Basically what I mean is that I've created the ISO file using Media Creation Tool right after upgrading Windows 8.1. Since then W10 was updated to the 10586 build and I was thinking of updating the ISO (just for emergencies). What are my options? Should I use MCT again and just create another ISO file?

Another option would be to download a Windows 10 torrent. Since my key is associated with my MS account I figured it would activate with no problems. What do you recommend??

Thank you!

Answer:How to update Windows 10 ISO to the latest build??

Why not download the ISO direct from Microsoft. Just choose the correct edition

Windows 10 ISO Download

Tech Bench

2 more replies
Relevance 52.48%

Last night I downloaded the latest windows updateversion and now all I`m getting are tips on installing SP2. I liked the old system where I could choose for myself what I installed, but Icant find a way to do it. I do not want automatic downloads so I thought I`d remove the update I`ddone. There`s no reference to it in My Add/Removeso can anyone help please?

Answer:Latest download from MS re windows update

Sorry everyone. Please ignore this thread. My 8 year old nephew has solved my problem.

2 more replies