Computer Support Forum

MMC fails to load event viewer in RTM

Question: MMC fails to load event viewer in RTM

when I try to invoke the event viewer I get the following error:MMC could not create the snap-in.Name: Event ViewerCLSID: FX:{b05566ad-fe9c-7a4cbb7cb510}This is a new installation of Windows Vista Ultimate from MSDN (RTM).Any ideas how to fix this? how to re-register the snap-in?thanks
 
david

Relevance 100%
Preferred Solution: MMC fails to load event viewer in RTM

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: MMC fails to load event viewer in RTM

After typing this I found a mmc.exe.config file that was forcing the version of .net. Renaming the file fixed my problem.
You rock! I spent a long time trying to figure this one out. An application (Peachtree accounting) installed the .net 1.1 framework and hosed many of my MMC snap in's including event viewer, task scheduler and IIS 7 admin.
I looked in my system32 folder and sure enough there was an mmc.exe.config file that had the supported runtime section set to "v1.1.4322". I couldn't seem to edit the file to comment out that section, vista wouldn't let me save it, but it did let me rename it to mmc.exe.config.BAK and sure enough everything started working again. I'm guessing these problems with mmc and snap in's in Vista are all related to apps that install the .net 1.1 framework and windows vista's inability to protect that mmc.exe.config file.

Cheers to you!

54 more replies
Relevance 79.13%

Slow booting.  Really slow booting.  Seems that using an SD card for ReadyBoot/ReadyBoost is causing the issue.  But why?
On investigation, this only started happening back in November, which coincides with the install of KB2685813 UMDF 1.11 (http://support.microsoft.com/kb/2685813).
Could be a bit buggy....


I'll uninstall the update and see if this solves the issue.
So, first event:

Log Name:      System
Source:        Microsoft-Windows-DriverFrameworks-UserMode
Date:          04/01/2013 10:47:30
Event ID:      10114
Task Category: Startup of the UMDF reflector
Level:         Information
Keywords:      (2)
User:          SYSTEM
Computer:      LAPTOPW7A
Description:
The UMDF reflector was unable to complete startup because the WUDFPf service was not found.  This service may be started later during boot, at which point Windows will attempt to start the device again.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-DriverFrameworks-UserMode" Guid="{2E35AAEB-857F-4BEB-A418-2E6C0E54D988}" />
    <EventID>10114</EventID>
    <Version>1</Version>
    <Level>4</Level>
   ... Read more

Answer:UMDF Reflector fails to start (event 10114, Driverframeworks-Usermode) resulting in WUDFRd failed to load... (event 219, Kernel-PnP)

Hmm.  Now that is interesting.
In my System event log I was getting an NTFS error (57: Failed to flush tlog).  I didn't think it was from my HDD, so using diskpart, I ran a 'CLEAN ALL' on my SD card, then recreated the FS as exFAT (previously it was NTFS).
Seems to be working now, although I'm getting VDS Basic Provider errors (Unexpected failure.  Error code:
[email protected]) "which can be safely ignored" (re: KB979391).
This begs the question: if it can be safely ignored, why is it raised in the first place?
Boot time is also restored to an acceptable timescale.

11 more replies
Relevance 78.72%

My Event Viewer hasn't worked since I installed Vista several months ago. Today I got determined to "fix" it, and long story short I messed about in the registry permissions to the point where neither Eventvwr.exe nor MMC.exe will even launch. (They used to at least give me error messages.)

There is a Registry repair utility from Microsoft for XP; is there a similar one for Vista ?

If not, what is the best way to run a Repair Install on Vista that particularly "aims" at the Registry ?

Is there a Vista equivalent of "sfc" ?

Answer:[SOLVED] Event Viewer fails to Launch

Was this an upgrade to Vista or a full installation?


Quote:




Use Vista System File Checker tool (SFC.exe) to determine which file is causing the issue, and then replace the file. To do this, follow these steps:
1. Open an elevated command prompt. To do this, click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.

2. Type the following command, and then press ENTER:
sfc /scannow
The sfc /scannow command scans all protected system files and replaces incorrect versions with correct Microsoft versions.


To determine which files could not be repaired by the System File Checker tool, follow these steps:
1. Open an elevated command prompt.

2. Type the following command, and then press ENTER:
findstr /C:"[SR] Cannot repair member file" %windir%\logs\cbs\cbs.log >sfcdetails.txt

Note The Sfcdetails.txt file contains details from every time that the System File Checker tool has been run on the computer. The file includes information about files that were not repaired by the System File Checker tool. Verify the date and time entries to determine the problem files that were found the last time that you ran the System File Checker tool.

3. Type the following command, and then press ENTER:
edit sfcdetails.txt
The Sfcdetails.txt file uses the following format:
Date... Read more

1 more replies
Relevance 75.85%

Lately, when I click Event Viewer in Administrative Tools, there is a spinning circle delay of 15 seconds, then an "Adding snap-in to console" box appears before the Event Viewer finally opens. Any ideas as to what's causing this annoyance?

Answer:Event Viewer slow to load

Hi there .. I would think that is about normal just takes time depending on how many Windows Logs have to be loaded

6 more replies
Relevance 75.03%

I don't really know what they are about, they seem to be related to msn/windows messenger, but im not sure that they occur every time i go on msn. They are coming up as errors, but does anyone know what they are about?
Examples:

Event Type: Information
Event Source: ESENT
Event Category: General
Event ID: 101
Date: 23/10/2006
Time: 20:03:52
User: N/A
Computer: USER-2F62D3344E
Description:
msnmsgr (2896) The database engine stopped.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Event Type: Information
Event Source: ESENT
Event Category: General
Event ID: 102
Date: 23/10/2006
Time: 19:32:23
User: N/A
Computer: USER-2F62D3344E
Description:
msnmsgr (2896) \\.\C:\Documents and Settings\user\Local Settings\Application Data\Microsoft\Messenger\[email protected]\SharingMetadata\Working\database_22E8_B00E_E8AF_DDF3\dfsr.db: The database engine started a new instance (0).

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

More replies
Relevance 74.21%

Hello all,

So I'm still chasing down why explorer keeps crashing, it's quite annoying. But I guess in doing so I messed with some setting (or maybe I didn't and this happened) and now my event viewer wont run, I even tried running it through cmd with the following commands: eventvwr.msc /s and just eventvwr.msc

I just tried to run event viewer to chase down my explorer crash, then that wont even run, I have no idea what the heck is going on... There's no "cause" except explorer usually crashes when I right click, or when I'm in my desktop folder. Those are the two main things. As far as the eventviewer, I'm clueless. If need be, I can do system restore, but more than likely that's an extreme measure for such a small issue. Its more an annoyance than anything else, it doesnt really bother me lol.

Could it be AVG's context menu?

All I know is that this is really getting annoying, but anyway, if you guys have any suggestions that would be great. Do I need to post any screenshots of anything??? I can post them if needed.

BTW I'm running Vista x64 SP2 on a HP dv4 lappy, the only taskbar items running are AVG, my pointer, and sound...

Thanks for the help guys

Answer:Event Viewer wont load / Explorer crash

Are either of these two running as a process?
Does event viewer give you an error or just nothing?
Any major changes recently?
What if you restored to yesterday?

11 more replies
Relevance 72.98%

1. Every time I boot up the computer, the following error is generated in Event Viewer:
Source: DistributedCom, Event ID: 10010 

The server {F9717507-6651-4EDB-BFF7-AE615179BCCF} did not register with DCOM within the required timeout.

This key pertains to appID WinInetBrokerServer (CLSID WinInetBroker). I tried adding permissions to the key(s) but that didn't solve the problem. In the permissions for the key, the first user name listed is named Account Unknown (S-1-15-2-1).
I think maybe that may have something to do with it. I deleted the 6 registry keys associated with this key and everything worked but I was locked out of Windows XP Mode (Windows Virtual PC). I was wondering if anyone had any suggestions to fix this error?


2. ALSO, exactly once a day I receive the following warning in Event Viewer:
Source: DNS Client Events, Event ID: 1014 

Name resolution for the name imrk.net timed out after none of the configured DNS servers responded.


It would seem that there is an application on my computer that is trying to connect to this site for whatever reason. I have read about ties between this domain and hacking. Someone suggested to enable boot logging in Process Monitor to try to pinpoint the
app but there's so much going on in Process Monitor I'm not really sure where to look. All of the apps that run on a daily basis (including the ones that are set to run at startup) seem relatively safe to me. I've run the gamut of a... Read more

More replies
Relevance 65.19%

Thanks for any help.

Event Type: Warning
Event Source: WinMgmt
Event Category: None
Event ID: 5603
Date: 28/11/2006
Time: 17:57:33
User: USER-2F62D3344E\user
Computer: USER-2F62D3344E
Description:
A provider, OffProv11, has been registered in the WMI namespace, Root\MSAPPS11, but did not specify the HostingModel property. This provider will be run using the LocalSystem account. This account is privileged and the provider may cause a security violation if it does not correctly impersonate user requests. Ensure that provider has been reviewed for security behavior and update the HostingModel property of the provider registration to an account with the least privileges possible for the required functionality.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Answer:What's this event in event viewer? (event source WinMgmt)

http://support.microsoft.com/default...b;en-us;891642
this might help

1 more replies
Relevance 63.96%

Hi,
keep getting the errors above every startup regarding;
11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.
Context: Application, SystemIndex Catalog
Details:
(HRESULT : 0x80004005) (0x80004005)"
I have 3 admin user profiles.
Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch event viewer or mouse customisation softwares, they freeze temporarily and ... Read more

Answer:Windows 7: Event errors (11, 7000, 7026), intellipoint and event viewer freeze.

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

7 more replies
Relevance 63.96%

Hi all,

i tried loading the eventvwr.msc file from system32 folder directly as well as from the administrator tools, but i get:

"event log service is unavailable. verify that the service is running."

so i try to start the event log service, from the services.msc program;
whenever i try to start windows event log from services i get the message:

"Windows could not start the windows event log service on local computer.
Error 3: The system cannot find the path specified."

how can i specify the path?
or
how can i resolve the problem?

any help would be appreciated please---thanks

Answer:HELP need to solve this problem asap - Unable to start event viewer/event log service

Fire up regedit and find this key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog

With "Eventlog" highlighted on the left pane, you should be able to see a value called "ImagePath" on the right. ImagePath should be equal to this:

%SystemRoot%\System32\svchost.exe -k LocalServiceNetworkRestricted

If you can't see "ImagePath" in that location, or if it's not set to the text above, that's almost certainly your problem. If you're in the habit of using "registry cleaners", that might be the cause.

3 more replies
Relevance 63.96%

I was running 3DMark06 and got a BSOD code 124. After that every time I boot Event Viewer logs Error Codes ID 3012 and 3011. Attached are screenshots of both.

I googled this and found two different threads where someone suggested to rebuild the performance counters. Both responses were basically the same, below is one. Neither of the OP's came back and said if this worked for them.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Re: LoadPerf 3011, 3012
Hi-
I had the same problem with LoadPerf and here is what I found out:
All performance counter names and explain text are maintained in string tables managed by the performance counter subsystem (Perflib).

The current contents of the performance counter string tables are corrupted and cannot be displayed. To correct the problem, rebuild the string tables.

User Action
To rebuild the string tables, on the computer that displayed the message, at the command prompt, type Lodctr /r
The contents of the string tables are automatically rebuilt.

I hope this helps
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Since this was from 2008 (XP?) and the other response was for Vista I wanted to see if the guru's at SevenForums thought that this was okay before I did this.

Here are the screenshoots of my two errors.

Answer:After BSOD Event Viewer Logs Event ID 3012 and 3011 every time I boot

Rebuilding the string tables as outlined in my first post fixed the problem.

1 more replies
Relevance 63.96%

Hi,

keep getting the errors above every startup regarding;

11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.

Context: Application, SystemIndex Catalog

Details:
(HRESULT : 0x80004005) (0x80004005)"

I have 3 admin user profiles.

Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch ... Read more

Answer:Event errors (11, 7000, 7026), intellipoint and event viewer freeze.

Hiya and welcome to SevenForums!
Please contact an admin to move this thread, because this isn't the appropriate section for these kinds of problems.

4 more replies
Relevance 63.96%

Hi,

keep getting the errors above every startup regarding;

11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.

Context: Application, SystemIndex Catalog

Details:
(HRESULT : 0x80004005) (0x80004005)"

I have 3 admin user profiles.

Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch ... Read more

More replies
Relevance 63.96%

Hi,

I was hoping somebody could offer an insight on the below, as searching around I've not found much to go on other than "overheating"

Basically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words) For example, see how hot the machine gets just by resuming from a sleep (this is all within a minute or so):



I have been seeing the following error in event viewer each time I start Windows (4 entries) for some time:



So today I bit the bullet and had the back cover off the laptop and noticed what a bad state the thermal compound was in, for both the CPU and the chipset chip, so wiped it off using TIM Cleaner, and then applied new thermal compound and put the laptop back together. I was actually shocked because for the first time since I can remember, I could feel cold air blowing from the vents of my laptop! I logged into Windows and noticed that my temperatures had fallen and were staying at around the below:



Not as low as I'd like but a massive improvement. Trouble is, I am still getting the WHEA-Logger event errors in Windows Event Viewer ('processor core') and wondered if this was not in regards to overheating after all?

The plus side is my laptop is now almost totally silent - the way it must have been when I bought it new 3 years ago! But I was wondering how to investigate these WHEA-Logger errors, if anyone has any advice that'd be great.

... Read more

Answer:WHEA-Logger event 18/19 errors in Event Viewer (W7 Home Premium)

First, well done on applying the thermal paste to the cpu/gpu. I assume you cleaned the vents as well. Did you use arctic silver 5 (just curious)?

I wonder if the processor could have been damaged from the heat. Are you experiencing any BSODs or other problems? You can run Prime95 to test your system. And Furmark for gpu.

2 more replies
Relevance 63.96%

when I run reboot stress test at Intel platform with win10 Desktop RS1 version, after some cylces test, XHCI controller show yellow bang. Event viewer showed that event id is 14.  I want to know the indication of
StartDeviceFailReason equals 3. I cannot find more info about this failure from website.Thanks a lot!









-

Provider











[
Name]
Microsoft-Windows-USB-USBXHCI










[
Guid]
{30E1D284-5D88-459C-83FD-6345B39B19EC}




















EventID
14



















Version
0



















Level
2



















Task
0



















Opcode
0



















Keywords
0x8000400000000000

















-

TimeCreated











[
SystemTime]
2016-11-25T19:48:29.908393500Z




















EventRecordID
7099


















Correlation

















-

Execution











[
ProcessID]
4










[
ThreadID]
232




















Channel
System



















Computer
LAPTOP-QQEHB4HS

















-

Security











[
UserID]
S-1-5-18












-

EventData










fid_UcxController
0x187f9ddd64a8







... Read more

More replies
Relevance 63.55%

The master browser has received a server announcement from the computer MATTSLAPTOP that believes that it is the master browser for the domain on transport NetBT_Tcpip_{18E5B85E-1249-4040-9EF0-5B1F93A7295B}. The master browser is stopping or an election is being forced.



...wtf.
 

Answer:odd event viewer event. my brothers laptop causes errors on my machine?

http://support.microsoft.com/default.aspx?scid=kb;en-us;135464
 

1 more replies
Relevance 63.55%

Hi all,

i tried loading the eventvwr.msc file from system32 folder directly as well as from the administrator tools, but i get:

"event log service is unavailable. verify that the service is running."

so i try to start the event log service, from the services.msc program;
whenever i try to start windows event log from services i get the message:

"Windows could not start the windows event log service on local computer.
Error 3: The system cannot find the path specified."

how can i specify the path?
or
how can i resolve the problem?

any help would be appreciated please---thanks

Answer:Unable to start event viewer/event log service on vista

By the way the OS is a Vista Home Prem without SP1. and i have searched this problem extensively, finding no solutions.

If anyone has any advice it would be greatly appreciated.

19 more replies
Relevance 63.55%

System event not recording anything. It is empty, says "date is invalid(13)".

I have some flaky things going on like unexplained CPU spikes causing slowdowns and mouse drag. Also have video problems screen going blank then recovery.

I have reloaded video drivers to no avail. No system lockups or BSODs. I need to see system event log to debug. Other event logs OK. I am proficient on PC and have searched for event log problem. The Event Log service is running. Thanks.

hp pavilion dv9000
OS Name Microsoft® Windows Vista™ Home Premium
Version 6.0.6001 Service Pack 1 Build 6001
Processor Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz, 1801 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Hewlett-Packard F.23, 10/3/2007
SMBIOS Version 2.4
Installed Physical Memory (RAM) 2.00 GB
Adapter Type GeForce 8400M GS, NVIDIA compatible
Adapter Description NVIDIA GeForce 8400M GS
Adapter RAM 128.00 MB (134,217,728 bytes)
 

Answer:Solved: Vista, Event Viewer - system event log not recording

Did you check the - %SystemRoot%\System32\Winevt\Logs\System.evtx file? It may be corrupted and you may want to rename it to .old and let it recreate itself.
 

2 more replies
Relevance 63.55%

MY COMPUTER:
=============
OS: Win XP Corp SP2
MOBO: A7N8X-E Deluxe
CPU: AMD AthlonXP-M 2000 @ 2300GHz
HDD: Seagate ST3320620AS
Maxtor 6 Y160M0 (both SATA drives)
RAM: 2x 256 512MB pc3200 Crucial Value Select
GFX: ATI Radeon 9800pro
PSU: Antec 350? (the one that comes with Antec Sonata case) (broke)
Now I use a 400W no brand i bought for £15
BACKGROUND: (MAY OR MAY NOT BE RELEVANT)
============
My computer was running great until a few months ago when it crashed while I was playing HALO online. The computer turned off but the green light on front of case was still on. When i tried to reset it, nothing would come up on the monitor and the monitors light remained orange (standby). I knew the computer wasn’t booting up because it would have spoke to me as the a7n8x-e does. The fans and LED on the motherboard would turn on though and i could hear the HDD spin up.
Anyway I tried another socket A processor but it didn’t fix it. Then eventually I tried another PSU and that fixed it. My computer was working properly again.
THE PROBLEM:
============
When I tried to play HALO again on my computer I noticed that the originally smooth performance was now terrible. The game seemed to (and continues to ) freeze for a second every few seconds. When this occurs I can hear a click from the HDD and the screen and game freezes for a second. I tried to continue to play under these conditions the computer grinded to a halt and crashed.
When I checked the event log their are multiple event ... Read more

More replies
Relevance 63.55%

Hi.
I have noticed that during the long duration my PC is on (18 hours), several apps keep getting crash. Even after I restart these apps, they will eventually crash. PC is still functioning.
The apps that are crashing are:

Asus AI Suite 2 (I use it for fan control)Corsair Utility Engine - for my mechanical gaming keyboardBitdefender - The Antivirus software doesn't really crash, but it's a module inside BitDefender that has issues.
Bellow are all three event viewer reports for all mentioned apps.
1. Asus AI
Faulting application name: AI Suite II.exe, version: 2.0.0.0, time stamp: 0x00000000
Faulting module name: KERNELBASE.dll, version: 10.0.15063.296, time stamp: 0x28e9cf15
Exception code: 0x0eedfade
Fault offset: 0x000eb802
Faulting process id: 0x3600
Faulting application start time: 0x01d2ee6667bfdd12
Faulting application path: C:\Program Files (x86)\ASUS\AI Suite III\AI Suite II.exe
Faulting module path: C:\WINDOWS\System32\KERNELBASE.dll
Report Id: 64c7a38e-b13e-42ba-bf9f-4b4e72c0cc4b
Faulting package full name:
Faulting package-relative application ID:
2. Corsair Utility Engine
Faulting application name: CorsairHID.exe, version: 1.16.42.0, time stamp: 0x56f25dd3
Faulting module name: ntdll.dll, version: 10.0.15063.0, time stamp: 0xa82cc161
Exception code: 0xc0000005
Fault offset: 0x0005d9f4
Faulting process id: 0x3190
Faulting application start time: 0x01d2eccfcf3748b1
Faulting application path: C:\Program Files (x86)\Corsair\Corsair Utility Engine\CorsairHID.exe
... Read more

Answer:Multiple Application Errors (Event 1000) in Event Viewer

Please use this link to create a zip file so that we can troubleshoot the bsod minidump files and the logs:
BSOD - Posting Instructions - Windows 10 Forums

Please change the default language to English so that we will be able to read and troubleshoot the logs.

2 more replies
Relevance 63.55%

It's been a while since I've experienced a BSOD as I'm viewing a video on youtube. It would freeze as if the audio was caught in mid-stream then BSOD, then would restart automatically. I go to Event Viewer after windows as loaded and I see Event 41 Kernel-Power in there.

I had this issue before and we found out that the motherboard was causing the issue. I have also replaced my video card and added additional memory and expanded to 16gb. Before, I only have 8gb.

Ran sfc/scannow with no errors found. Going to do chkdsk as well.

It's strange because this does not happen at all when I'm playing online games or even just standard browsing. It's when I play videos on youtube that there would be instances where this would happen. There are other times where I can view them without any issue at all.

Any ideas would be great.

Also, how can I attach the windows DMP file to scale it down as it is just really large?

Thanks again guys.

Answer:BSOD when watching videos on youtube, Event 41 in Event Viewer

Hello Santos, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

9 more replies
Relevance 63.55%

EDIT: ARGH, sorry, meant to post this in General Discussion forum, I have no idea if it is a network issue.

Hello everyone,

I keep seeing this error appear several times a day, even during idle, in my Event Viewer. I did a clean install of build 10586 less than a month ago. I'm not having any overt issues yet, but the error is disturbing.

SettingSyncHost (9144) {979B90BD-0F81-4D83-B038-62032DD17C47}: Database C:\Users\xxxxx\AppData\Local\Microsoft\Windows\SettingSync\metastore\meta.edb: Index deleteDetection of table items is corrupted (0).
I have spent a few hours researching this and I can't find any reports of similar issues or even what the file metastore\meta.edb is for. Is this hopefully one I can just rename and it'll automatically create a new one?

More replies
Relevance 63.55%

Hello everyone,

I keep seeing this error appear several times a day, even during idle, in my Event Viewer. I did a clean install of build 10586 less than a month ago. I'm not having any overt issues yet, but the error is disturbing.

SettingSyncHost (9144) {979B90BD-0F81-4D83-B038-62032DD17C47}: Database C:\Users\xxxxx\AppData\Local\Microsoft\Windows\SettingSync\metastore\meta.edb: Index deleteDetection of table items is corrupted (0).
I have spent a few hours researching this and I can't find any reports of similar issues or even what the file metastore\meta.edb is for. Is this hopefully one I can just rename and it'll automatically create a new one?

Answer:Event Viewer Errors: SettingSyncHost, Source ESENT, Event 467

Bump... anyone have any idea? I keep getting it averaging about once an hour.

EDIT: Sorry, forgot to add, already tried /sfc scannow, it doesn't find the error.

2 more replies
Relevance 63.55%

Well, I tryed to manage page-file but unfortunataly it resulted in problems. Then I lost VAIO-CARE and 7 ZIP files too. When I open Event Viewer every single day I see this: event Id 2002, Souce: Eap Host, Log name: Application and number of Eventes: 84. As I am desparate about that, What sould I do? Reinstall VAIO-care or WHAT else? Please help me!!!!! Well, I can say that before of all, I tryed to install vopt, latest version but it was not freeware and I soon had to uninstall it but it was not getting to uninstall from programs and features and then I used register editor to delete the leftovers which desapered from program and features....but I can see several error in event viewr such as Event 11706, MsInstaller >>>> Product Vaio Media Plus -- Error 1706 - An instalation for the product Vaio Media Plus cannot be found. Try the installation again using a valid copy of the instalation package 'VMP VEPMMx64.msi'. So should I reinstall all vaio care or not................!!! By the way I tryed to install vopt in order to align files in hard drive but when I tryed to manage page file it did not work as should have so I lost vaio care..........................................What to do? can you figure out what going on.................!!!

Answer:Event Viewer Event Id 2002, Source: EapHost, Log Application

Welcome to the forums Marioo!

Have you tried a system restore to a point before these errors started? (Easiest things first) You could also try a sfc/scannow, to find and possibly repair any corrupted system files. We have many fine tutorials here at the forums, written by some very knowledgeable people, heres a link to one if you haven't did this before :

SFC /SCANNOW Command - System File Checker

5 more replies
Relevance 63.55%

After too many unexplained problems, I decided to reinstall Windows 8.1 Pro x64, and migrate off of SBS 2011 Standard. In addition to the primary workstation that can't read any event logs, I built five Server 2012 R2 servers (Hyper-V host, Active Directory
VM, Exchange 2013 VM, SQL Server 2014 VM, and WSUS VM).

I was diagnosing why my workstation's Outlook cannot reach the local Exchange Server.   I tried to look at the event logs, and found the
Event Viewer cannot open the event log or custom view.  Verify that Event Log service is running (it is) or the query is too long (whatever that indicates).  The request is not supported (50)
Looking at the directory of the event logs folder.  It appears that most logs are empty, which is understandable since it's a rebuilt installation.  I found a small number of Applications and Services Logs and it appears nothing was logged since
six days ago on 4/4/2016.   On support forums, I found many have this exact problem on Win 7, Win 8, and Win 10.  Of the solutions posted none of them would even execute on my Win 8.1 Pro x64 machine.  I tried clearing the event logs (WEVTUTIL
CL logfilename) and am told Failed to clear log .... The request is not supported. 
It's very difficult to diagnose why Outlook 2013 cannot reach Exchange 2013, even if Outlook is installed on the Exchange server machine (just as a test).  The web-based Outlook owa, ecp, ... all work fine. ... Read more

More replies
Relevance 63.55%

EDIT: ARGH, sorry, meant to post this in General Discussion forum, I have no idea if it is a network issue.

Hello everyone,

I keep seeing this error appear several times a day, even during idle, in my Event Viewer. I did a clean install of build 10586 less than a month ago. I'm not having any overt issues yet, but the error is disturbing.

SettingSyncHost (9144) {979B90BD-0F81-4D83-B038-62032DD17C47}: Database C:\Users\xxxxx\AppData\Local\Microsoft\Windows\SettingSync\metastore\meta.edb: Index deleteDetection of table items is corrupted (0).
I have spent a few hours researching this and I can't find any reports of similar issues or even what the file metastore\meta.edb is for. Is this hopefully one I can just rename and it'll automatically create a new one?

More replies
Relevance 63.55%

My Thinkpad W520 has been having an issue where it restarted prompytly and unexpectedly. I thought the issue might be related to the OS or Video driver, and ended up doing clean OS install with no luck. I ran the basic HW tests using Lenovo's utility and the memory, motherboard, and hard disk showed up as healthy.  To me, this seems to be a HW issues, but I am not able to isolate the cause of the problem. Any advice would be appreciated.    

Answer:W520 Restarts Unexpectedly With No Related Event in the Event Viewer

Look in the event log. See if there is an error at the time of the restart. I would do 3 things:1) Run a memory test (probably already done)2) Run a HDD test (Do long test)3) Install TPFANCONTROL to monitor temperatures

6 more replies
Relevance 63.14%

I have noticed these in my event viewer appearing a lot and roughly around times when my computer decides to freeze up on me.

Event ID 7001, Service Control Manager
The Peer Networking Grouping service depends on the Peer Name Resolution Protocol service which failed to start because of the following error:
%%-2140993535

&

Event ID 7023, Service Control Manager
The Peer Name Resolution Protocol service terminated with the following error:
%%-2140993535

Answer:Event ID 7001 and 7023 Shows in Event Viewer a lot.

Just FYI - I usually ignore these errors when they show up.
BUT, if they're associated with freezes we'll need to have a deeper look.

Please post this info even though you're not reporting BSOD's: http://www.sevenforums.com/crashes-d...tructions.html

7 more replies
Relevance 63.14%

From what I understand about the event log in Windows 7, when someone tries and is unsuccessful when logging into the computer the event log should record an event id 4625. However this is not happening at either of my Windows 7 Ultimate machines. I found an identical thread about this problem where the user found a solution but did not specify what is was.

http://forums.techguy.org/general-security/995501-solved-event-id-4625-not.html

Any ideas?

Thanks
 

Answer:Solved: Event ID 4625 not being logged in event viewer

Are you creating a Custom View ? Be sure that you have selected 'By Log - Event Logs: Windows Log, Security. Then except for the Event ID field, everything should not be checked.
 

3 more replies
Relevance 63.14%

Welcome,
I have a problem. Every day I have this error in event viewer, system log:
{Registry Hive Recovered} Registry hive (file):\??\C:\ProgramData\Malwarebytes\Malwarebytes Anti-Malware\S-1-5-21-4089430802-3287748835-2730757419-1001-0-ntuser.dat was corrupted and it has been recovered. Some data might have been lost.
This error repeats every day at about 3:00AM.
Maybe someone could help me? Thanks in advance.

Answer:Event ID 5 Kernel-General error in Event Viewer

Hi:

Just curious:
Are you running MBAM Premium (paid version), or Free?If it's Premium, what time does your scheduled daily Threat scan run? (Assuming you are running a daily Threat scan, which is the default scan schedule.) (Dashboard > Settings > Automated Scheduling > Threat Scan > Edit)

Thanks,

MM

7 more replies
Relevance 63.14%

A week ago I started getting this warning errors logged three to six times or more per day in Event Viewer.

Event Viewer Warning - Source is e1yexpress - Event ID is 27
Intel(R) 82567V-2 Gigabit Network Connection Link has been disconnected.

Every time Event Viewer logs the e1yexpress warning it follows up with this logged warning
Event Viewer Warning - Source is DNS Client Events - Event ID is 1014
Name resolution for the name isatap.home timed out after none of the configured DNS servers responded.

Not every time, but a lot of times Event Viewer also logs this warning right after it logs the isatap.home warning.
Event Viewer Warning - Source is DNS Client Events - Event ID is 1014
Name resolution for the name teredo.ipv6.mocrosoft.com timed out after none of the configured DNS servers responded.

Today I installed updated drivers for my Intel(R) 82567V-2 Gigabit Network Connection, but after 11 hours of no logged error warnings they started up again and I got three sets of the above logged in a 90 minute time frame.

My system is two years old and as far as I know I have never had these errors logged before.

My motherboard is a Asus Rampage III Extreme.

Any ideas on how to get event viewer to stop logging these? A google search really did not offer any real clues on what to try other than updating my Intel(R) 82567V-2 Gigabit Network Connection drivers, which did not solve the problem.

Answer:Event Viewer Warning - Source e1yexpress - Event ID 27

Well after trying everything google came up with to try, including updating drivers to the latest version, rolling drivers back to the default Win7 version, disabling SIPS and a few others things I decided to call Verizon and see what they had to say. As soon as I told Verizon Tech Support that my error code was "e1yexpress - Event ID is 27
Intel(R) 82567V-2 Gigabit Network Connection Link has been disconnected", they told me not our problem take your PC to a shop. I called back a couple of hours later and talked to a different person and this time I only said that I was getting the Event 1014 time out errors. They had me do a few things in a cmd prompt and then said we do not know, but we can send you a router, I said fine, I will try the router.

Well it has been over a week since installing the new router and no error codes at all so it was the router!

2 more replies
Relevance 63.14%

Not sure if this is the right section, if not please move to the correct one.

Under the details tab in Event Viewer when a logged event has a GUID that shows up in the registry under HKEYLM > System > CurrentControlSet>Control>WM>Autologger>EventLog-XX I know how to disable the event from logging, but Event ID 15 - ACPI does not have a GUID.

Does any one know how I can get this to stop logging? From what I have seen on the web only a fix to the motherboard BIOS would fix it and I doubt that this is high on Asus' list of BIOS fixes for the R6E. Everything I have read on the web says that this is meaningless and in the General tab it basically says to ignore it so I would like to get this to stop logging in Event Viewer.

More replies
Relevance 63.14%

I keep getting this error message in the application log of the event viewer.



I haven't been able to figure out which application I run which produces this error. It might be Windows Defend when it scans. I'm really not sure though. Can anyone give me any insight to this error.

I have Googled this, but nothing I see makes any sense to me. Maybe someone can simplify it for me. Thanks.
 

Answer:Userenv, Event 1000 Error in Event Viewer

HI!
This helped me when I had the same problem...check it out.
User Profile Hive Cleanup Service
http://www.microsoft.com/downloads/...6D-8912-4E18-B570-42470E2F3582&displaylang=en





Overview
The User Profile Hive Cleanup service helps to ensure user sessions are completely terminated when a user logs off. System processes and applications occasionally maintain connections to registry keys in the user profile after a user logs off. In those cases the user session is prevented from completely ending. This can result in problems when using Roaming User Profiles in a server environment or when using locked profiles as implemented through the Shared Computer Toolkit for Windows XP.

On Windows 2000 you can benefit from this service if the application event log shows event id 1000 where the message text indicates that the profile is not unloading and that the error is "Access is denied". On Windows XP and Windows Server 2003 either event ids 1517 and 1524 indicate the same profile unload problem.

To accomplish this the service monitors for logged off users that still have registry hives loaded. When that happens the service determines which application have handles opened to the hives and releases them. It logs the application name and what registry keys were left open. After this the system finishes unloading the profile.Click to expand...

Hope it works as well for you!

 

3 more replies
Relevance 63.14%

I wanted to see who was viewing my computer and went to event viewer, under System > filter current log > power troubleshooter -- I found that the wake source for the system resuming from sleep was a device usb root hub, what does this mean?

More replies
Relevance 63.14%

If a make a password mistake when logging in, event viewer should log event with ID 4625*. But it doesn't. How do I get it too? If you want to know about my computer model Etc. Click on the computer icon next to my name.

(*Event 4625 means Bad password)

Thanks
 

Answer:Solved: Event ID 4625 not being logged in event viewer

I assume you are using Vista or Win 7

The following eventIDs are all related to Login Failures:
4625,4626,4627,4628,4630,4635,4649,4740,4771,4772,4777
 

2 more replies
Relevance 63.14%

I tried a lot, but couldn't find the event log for the cleanmgr.exe (Disk Cleanup) in the Event Viewer.
Actually, I need the source & event id of cleanmgr.exe to schedule a task in the Task Scheduler.

Answer:In Event Viewer, Where is event log for cleanmgr.exe (Disk Cleanup)?

This Article would be of services to you .

3 more replies
Relevance 63.14%

My computer seemed to be running more slowly after the Creators update, so I went into the error viewer and found a ton of errors with the source EapHost, Event ID 2002. From Googling around, I found that this error can be caused by leftover keys from Cisco software, so I went ahead and deleted two of the keys referred to in the error logs, and the errors associated with those keys stopped popping up. However, there's a third error that keeps popping up:

Skipping: Eap method DLL path validation failed. Error: typeId=21, authorId=311, vendorId=0, vendorType=0

The trouble is that this doesn't give me enough information to figure out which key I need to delete. It refers me to a node in the registry called WLANProfileCreationUXAuth. There are six subfolders under that one, and some of them contain keys that I can't delete. (Stupidly, I tried, but the system wouldn't let me.)

What I'm wondering is this: how can I figure out which of the specific keys I need to delete? None of them refer to Cisco, as far as I can see.

More replies
Relevance 63.14%

Every time I boot my laptop I get error message Event ID 10 in Event Viewer. The details are:

Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor"AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.

I do believe that the error message is nothing to be concerned about from what I have read when I googled it, but nothing I read tells you how to get rid of it. Does anone know how I can get rid of this so it does not show up in event viewer everytime I boot?

Answer:Event Viewer Error Message Event ID10 - How to get rid of it?

idahosurge,
Read through the link below...
Hope it helps with your problem.

Event ID 10 is logged in the Application log after you install Service Pack 1 for Windows 7 or Windows Server 2008 R2

5 more replies
Relevance 63.14%

While playing war thunder on steam my screen went black and i couldn't do anything. I restart my computer and play again it crashes. After one more time i look at my event viewer and find critical error event ID:41. I don't whether its the game or my pc.

Answer:BSOD playing war thunder, Event viewer event 41

Critical error - Event ID 41 is (most likely) when you forced the system to restart (usually by holding the power button down).

You have a NETGEAR WG111v3 Wireless-G USB Adapter:





I do not recommend using wireless USB network devices. Especially in Win8/8.1 systems.
These wireless USB devices have many issues with Win7 and later - using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win8/8.1 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.



I noticed that you don't have Secure Boot and/or UEFI enabled. If you were having problems with it and changed it, please let us know.





It's not necessary to enable it now. But, should you reinstall Windows at some point in the future, please enable it first.

I mention this because it may happen that (one day) the system won't boot. This can be caused by a program changing your UEFI settings, or an update of the UEFI resetting it to default values.

To test and see if this is the cause, boot into the UEFI and see if the settings have been changed. If uncertain, try with Secure Boot both on and off (and the UEFI on UEFI or Legacy (CSM))

If it still doesn't boot after trying this, then move on to other troubleshooting tools as it's not likely to be due to this.



Black screen errors are not... Read more

1 more replies
Relevance 63.14%

Every time I boot my laptop I get error message Event ID 11 in Event Viewer. The details are:

Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications.

This is listed under AppInit_DLLs in the registry and the dll being loaded is nvinitx.dll, from what I can find out this has to do with the optimus function on my laptop and having it loaded is okay. I just want to get rid of the error message being logged everytime I boot.

Answer:Event Viewer Error Message Event ID11 - How do I get rid of this to?

Does anyone have any ideas on how to get rid of this error message in Event Viewer?

2 more replies
Relevance 63.14%

I have updated Windows 10 Pro to the Creators update. I have had a few event viewer errors which I managed to fix. But I don't know what this one is, I guess everyone is seeing it, does anyone knoe how is it resolved? Thanks.

"Windows Hello for Business provisioning will not be launched.
Device is AAD joined ( AADJ or DJ++ ): Not Tested
User has logged on with AAD credentials: No
Windows Hello for Business policy is enabled: Not Tested
Local computer meets Windows hello for business hardware requirements: Not Tested
User is not connected to the machine via Remote Desktop: Yes
User certificate for on premise auth policy is enabled: Not Tested
Machine is governed by none policy."

Answer:W10 Creators update Event viewer error Event ID 360

Only workaround if you are fine with it.
Managing Windows 10 Creators Update rollout for a seamless experience - Page 7 - - Windows 10 Forums

1 more replies
Relevance 63.14%

My Win 7 Pro x64 system just started acting up. When I select an event in the Event Viewer, the More Information: Event Log Online Help link doesn't open IE10. When I click on the link, the Event Viewer pop-up confirmation box open to confirm sending information across the internet, but when I click "Yes" the box goes away and I get a momentary indication from the cursor that the action is processing then nothing. It will not change the active IE10 page or open IE10.

Is there a solution with out a system restore?

Thanks in advance for your assistance.

Regards

Answer:Event Viewer Event Log Online Help Links don't function

I don't know much about this kind of stuff - but here is what I dug up using Microsoft's Process Monitor and Process Explorer.

The mmc app (event viewer) sends info to one of the svchost instances (netsvcs).

Svchost writes some info to the registry about a scheduled task and then runs that task.

This starts taskeng - which starts wscript.

Wscript runs a temporary VBS file that is supposed to send a URL to the operating system (shell).

The OS is supposed to open your default browser.

Here is the contents of the VBS file from my testing:

Code:
Set shell = createobject("wscript.shell")
Shell.run """C:\Users\username\AppData\Local\Temp\tmp78C0.url"""


You might try SFC /SCANNOW Command - System File Checker

And let's hope that some other forum member can suggest things that you should check.

4 more replies
Relevance 61.91%

Hi Guys/Girls

I keep getting this error every 30 minutes anybody managed to solve this ?

Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 30/10/2016 11:54:11
Event ID: 10010
Task Category: None
Level: Error
Keywords: Classic
User: DALE-PC1\Dale
Computer: Dale-PC1
Description:
The server {4AA0A5C4-1B9B-4F2E-99D7-99C6AEC83474} did not register with DCOM within the required timeout.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="0">10010</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2016-10-30T11:54:11.788175700Z" />
<EventRecordID>18568</EventRecordID>
<Correlation />
<Execution ProcessID="8" ThreadID="9028" />
<Channel>System</Channel>
<Computer>Dale-PC1</Computer>
<Security UserID="S-1-5-21-4124590474-3230443324-182549641-1022" />
</System>
<EventData>
<Data Name="param1">{4AA0A5C4-1B9B-4F2E-99D7... Read more

Answer:Event Viewer keeps showing Event ID 10010

Hi,

It's a synchronization error. The server trying to sync to a device that is no longer present or was just never there.

Try to disable the following service: Portable Device Enumerator Service (WIN+R > Services.msc) and see if that helps.

Cheers,

11 more replies
Relevance 61.91%

Hi there,

It's my first time posting on this forum however this forum has helped me solve dozens of past issues so thanks

Ok so I've got an MSI GS40 notebook running Windows Home 64-bit. It's a great notebook and runs like a dream. I recently checked my Event Viewer and saw thousands of warnings. Basically the same warning every second. They're all Execution Service - Event ID: 1

I'm really not keen on a system restore or reformat. The hardware is pretty high-end and so it doesn't seem like anything has slowed down but I would like to resolve these crazy warnings.

Any help would be great...

More replies
Relevance 61.91%

Windows 10 Home 64 bit
ASUS X540LA Notebook

What is going on here and what is the best for dealing with this? The AppID seems to be designating RuntimeBroker, but I have done everything so far to correct this error. What am I missing?

Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 7/4/2016 7:05:24 PM
Event ID: 10016
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: DESKTOP-EOB6C9K
Description:
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160}
and APPID
{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="0">10016</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<T... Read more

Answer:Event Error ID 10016 in Event Viewer...

There are fixes on the forum if you search for this error. The solution involves changing permissions and editing the registry and should only be attempted if you are sure of what you are doing.

See:
Windows 10 Event ID 10010 and 10016 Errors With DistributedCOM
http://www.eightforums.com/performan...ro-64-bit.html

4 more replies
Relevance 61.91%

Hello,


First time ever I am posting a thread like this, never thought I would have to.

Anyway, the issue is described below.

Randomly my computer decides to shutdown and restart unexpectedly.

There is no blue screen, it just shut downs and restarts immediately.

I can't really relate the issue to a certain task or running program, it's all so random.

It can occur while browsing the web, watching a film or playing a game.

I have been fixing around with computers for quite some time now and this is my second build.
The components are listed below:

PSU: Corsair Professional Series HX850

CPU: Intel Core i7 2700K @ 3500 MHz

MB: Gigabyte GA-P67A-UD5-B3

RAM: Corsair Dominator 4x4GB 1600 MHz DDR3

GPU: EVGA GTX580 SuperClocked 1536 MB SLi

HDD: Corsair Force Series 3 60GB

HDD: Corsair Force Series 3 120GB

OS: Windows 7 Ultimate 64 Bit Retail

I finished this system about five months ago and it started to act like this since 3 weeks back.

The system is working solid otherwise.

Due to the limited amount of space on the system drive at 60GB I have disabled System Restore.

I have AVG Internet Security 2012 installed along with Malwarebyte's Anti-Malware.

I have tried to update system drivers in order to restore the system stability, which are:
USB 3.0 Host Controllers

SATA 3 Controllers

Realtek SFX Drivers

Realtek LAN Drivers
None of the above mentioned dr... Read more

Answer:Event Viewer - Event ID 6008 [Troubleshooting]

Event ID 6008 entries indicate that there was an unexpected shutdown.
Critical thermal event indicates that the problem is related to one of your hardware components not functioning properly that is triggering the computer to shut down.

Check if your CPU is overheating. Also check if the heat sink or fan is functioning properly. If the laptop is under warranty, get in touch with the manufacturer.

If it isn?t, get a good cleaning done for the fan and heat sink with compressed air only if you?re comfortable. Otherwise seek the help of a technician.

In addition, since power supply plays a major role in cooling the computer?s innards check if PSU (Power Supply Unit) is functioning properly.

Other thermal events (depending on your board) can be from the graphics card, bridge chipsets or hard drives.

You may opt to check for third party Thermal Event Monitor software so that you have a brief idea as in what?s triggering the critical thermal event.

Note: Microsoft cannot guarantee that any problems resulting from the use of Third Party Software can be solved. Using Third Party Software is at your own risk.

4 more replies
Relevance 61.91%

Dell Dimension 8200 (3 years old); Intel Pentium 4, 2000 Mhz; Phoenix BIOS (never updated); WinXP SP2 (all updates); AVG Pro; Brother MFC 420cn; Dell 1702 FP LCD; Spybot; MS AntiSpyware Beta.

Trying to save time for everyone, I'll just say that I looked at Event Viewer today. I've looked at it infrequently, and never could understand what I saw, but today there was something relatively new and scary:

Type: Warning
Date: 9/2/2005
Time: 7:24:03 AM
Source: disk
Category: None
Event: 51
User: N/A
Computer: JohnandCheryl

Further info under help and support said an error was detected during a paging file operation.

The word "disk" scared me, so I checked the entire Event Viewer, and found 25 of these errors, from Aug 1 2005 through Sep 3 2005. If this event was cataloged earlier, I don't know, because the Event Viewer only goes back to Aug 1.

I checked System Restore for Aug 1, 2005 and found a couple of things; 1) an accidental MS "update" to NVIDIA GeForce4 MX driver 5.12 -- but we've had the 6.1.7.7 driver for a long time now. The 5.12 screws up the display resolution, big time. I reinstalled the 6.17; resolution is fine; but I'm wondering if this could have something to do with the Event 51 warning.

Also, on that same date, something called Software Distribution Service 2.0 is listed three times, and I don't know why. I don't even know what it is.

I've researched the web, and can't find anything that seems ... Read more

More replies
Relevance 61.91%

I keep an eye on the event viewer and a new event I haven't seen before has showed up. The event is under the application heading as information and the source is (ESENT). It reads as follows:

Event Type: Information
Event Source: ESENT
Event Category: General
Event ID: 100
Date: 8/16/2004
Time: 5:20:33 AM
User: N/A
Computer: ALPHA
Description:
wuauclt (1272) The database engine 5.01.2600.0000 started.

Everything is the same on the next three events except the discriptions which are as follows:

wuaueng.dll (1272) SUS20ClientDataStore: The database engine started a new instance (0).

wuaueng.dll (1272) SUS20ClientDataStore: The database engine stopped the instance (0).

wuauclt (1272) The database engine stopped.

This happens several times a day. Everything seams to be working properly but I very interested in what this data is trying to tell me.

Thanks
John
 

Answer:Strange new event showing up in event viewer.

9 more replies
Relevance 61.91%

Greetings,

I have a large number of the following errors in my event viewer:
Level|Source|Event ID|Task Category
Error|spdt---|------4|--- none

General--
Driver detected an internal error in its data structures for .

Details--
__________
XML View--
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="sptd" />
<EventID Qualifiers="49156">4</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-06-25T05:25:52.106802800Z" />
<EventRecordID>83268</EventRecordID>
<Channel>System</Channel>
<Computer>adm-PC</Computer>
<Security />
</System>
- <EventData>
<Data />
<Binary>000000000100000000000000040004C0530000000000000000000000000000000000000000000000</Binary>
</EventData>
</Event>
__________
Here is the Friendly View--
-System
-Provider[ Name] sptd
-EventID4[ Qualifiers] 49156
Level2Task0Keywords0x80000000000000-TimeCreated[ SystemTime] 2011-06-25T05:25:52.106802800Z
EventRecordID83268ChannelSystemComputeradm-PCSecurity
-EventData
000000000100000000000000040004C0530000000000000000000000000000000000000000000000
Binary data:

In Words
0000: 00000000 00000001 00000000 C0040004
0008: 00000053 00000000 00000000 00000000
0010: 00000000 00000000

In Bytes
0000: 00 00 00 00 01 00 0... Read more

More replies
Relevance 61.91%

Windows 10 Home 64 bit
ASUS X540LA Notebook

What is going on here and what is the best for dealing with this? The AppID seems to be designating RuntimeBroker, but I have done everything so far to correct this error. What am I missing?

Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 7/4/2016 7:05:24 PM
Event ID: 10016
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: DESKTOP-EOB6C9K
Description:
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160}
and APPID
{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="0">10016</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<T... Read more

More replies
Relevance 61.91%

Hi Guys/Girls

I keep getting this error every 30 minutes anybody managed to solve this ?

Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 30/10/2016 11:54:11
Event ID: 10010
Task Category: None
Level: Error
Keywords: Classic
User: DALE-PC1\Dale
Computer: Dale-PC1
Description:
The server {4AA0A5C4-1B9B-4F2E-99D7-99C6AEC83474} did not register with DCOM within the required timeout.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="0">10010</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2016-10-30T11:54:11.788175700Z" />
<EventRecordID>18568</EventRecordID>
<Correlation />
<Execution ProcessID="8" ThreadID="9028" />
<Channel>System</Channel>
<Computer>Dale-PC1</Computer>
<Security UserID="S-1-5-21-4124590474-3230443324-182549641-1022" />
</System>
<EventData>
<Data Name="param1">{4AA0A5C4-1B9B-4F2E-99D7... Read more

Answer:Event Viewer keeps showing Event ID 10010

Hi,

It's a synchronization error. The server trying to sync to a device that is no longer present or was just never there.

Try to disable the following service: Portable Device Enumerator Service (WIN+R > Services.msc) and see if that helps.

Cheers,

1 more replies
Relevance 61.91%

Hi there,

It's my first time posting on this forum however this forum has helped me solve dozens of past issues so thanks

Ok so I've got an MSI GS40 notebook running Windows Home 64-bit. It's a great notebook and runs like a dream. I recently checked my Event Viewer and saw thousands of warnings. Basically the same warning every second. They're all Execution Service - Event ID: 1

I'm really not keen on a system restore or reformat. The hardware is pretty high-end and so it doesn't seem like anything has slowed down but I would like to resolve these crazy warnings.

Any help would be great...

More replies
Relevance 61.91%

I have a pavilion desktop h8-1075, and have found the following comes up in error of event viewer every so often

iaStor did not respond within the timeout period event 9

any assistance would be great to see if someone can cure this issue

Pavilion Desktop hpe h8-1075uk
Win 7/Pro
16 Meg ram

Tony Miller

Answer:Event Viewer error iaStor Event 9

Iastor is your storage driver (for HD or Raid) and often a driver will not respond within the normal range. No big deal but you can update the driver to newest version to see if that eliminates the messages

2 more replies
Relevance 61.91%

Hi, I have a strange thing going on with Event 1 in the Even Viewer.
Event 1 signifies that the computer awoke from sleep (standby/hibernation), see attachment below for illustrations. It shows the time (circled in blue) which is also the time it shows in the list with all the other events, and that is the actual time the event occurred. But if you look on top of the box (circled in red) you see weird times listed over there, in fact at the time that the event take place (9:08 in this case) the times listed above didn't arrive yet. Why are those future times there, and how does the computer write something form the past into the future? I find that very strange. Do you perhaps know how that could happen?

Thank you, I appreciate it!
 

Answer:Event Viewer - Event 1 has weird times in it

16 more replies
Relevance 61.91%

Howdy Gents....And Merry Christmas!!

Have a question...

I was poking around in event viewer and came across a new entry. It's called ESENT and is being logged anywere between 4-20 times a day. I've researched this...and it seams to be tied to Windows XP SP2 and the Windows Update Client Database because it's using the wuaueng.dll and wuauclt.exe files.


I do not have service pack 2 installed....but I'm updated on ALL fixs...so I'm thinking this is a problem with the just the Update Client. After backtracking my Install history...it began appearing in my logs after I installed the "Cumlative Security Update For Internet Explorer 6 Service Pack 1 (KB86781)....MS04-025.

I'm thinking Windows Update Installed the new Client software at that time...as that update didn't have anything to do with this. My questions are...

Has anyone seen this on an XP PRo system just using SP1?
Why is it being logged? (I Have autoupdate disabled)

More replies
Relevance 61.91%

Having installed IE 8 I`ve been using the Help section quite a bit.It works perfectly well but each time I press one of the Help subjects I`m getting an HHCTRL event 1904 in Event Viewer.Does anybody know what this is all about and how to fix it?

Answer:IE 8 Event Viewer HHCTRL Event 1904

The description for Event ID ( 1904 ) in Source ( HHCTRL ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: about:blank, click here.Registry error? Missing .dll file?

1 more replies
Relevance 59.45%

On a daily basis I recieve this listing in the event viewer in administrative tools ? If anyone can point me to a fix or walk me thru one it would be great to eliminate this from being listed day after day . Here is a copy of the details of the event and what it reports >
Event Type: Information
Event Source: NSCService
Event Category: None
Event ID: 35
Date: 2009/08/09
Time: 05:56:29 AM
User: NT AUTHORITY\SYSTEM
Computer:
Description:
The description for Event ID ( 35 ) in Source ( NSCService ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Norton Protection Center Service. <<<<<<<<<<

Mt Norton Security Suite ,still updates my virus definintions and any other updates pertaining to the security suite ,so Iam a bit confused by the whole thing ? Thanks in Advance to All that Reply !!!
Take Care Nick

Answer:reoccuring event in event viewer !

Information items in Event Viewer are totally disregarded by me.

I can't tell you to do the same, it's your system...but those items are provided only for informational purposes.

None of them merit any action by the owner/user...there is nothing to fix.

Louis

1 more replies
Relevance 59.45%

keep getting it logged as an error. I have gone into Adjust Date and Time\Internet Time\and it is set to automatically synchronize with time.windows.com and on a scheduled basis. When I try to update or change the setting I get an error message that an error occurred while windows was synchronizing. I have tried to do a system file check but get the error message that Windows Resource Protection could not perform the requested service or start the Repair Service. I have checked that Windows Modules Installer is set to manual and so I don't know how else I can repair this error 131. Can anyone help please.

Answer:How do I rectify Event ID 131 in Event Viewer so I don't

You can try to sync with other time instead of time.windows.com. Once succeeded, switch back to time.windows.com. In addition, make sure the 'Windows Time' service is running.

6 more replies
Relevance 59.45%

I've noticed an intriguing event in Event viewer...


Code:
Log Name: Application
Source: Microsoft-Windows-Security-SPP
Date: 25. 1. 2013. 8:13:00 PM
Event ID: 8208
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: *************
Description:
Acquisition of genuine ticket failed (hr=0xC004C4AA) for template Id {88c92734-d682-4d71-983e-d6ec3f16059f}
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Security-SPP" Guid="{E23B33B0-C8C9-472C-A5F9-F2BDFEA0F156}" EventSourceName="Software Protection Platform Service" />
<EventID Qualifiers="49152">8208</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-25T19:13:00.000000000Z" />
<EventRecordID>3131</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>MaminaKanta</Computer>
<Security />
</System>
<EventData>
<Data>hr=0xC004C4AA</Data>
<Data>{88c92734-d682-4d71-983e-d6ec3f16059f}</Data>
</E... Read more

Answer:Curious event in Event Viewer concerning 'with WMC'

Well, i should probably update this thread. I contacted Microsoft support, which told me that they've never seen this kind of situation before, one by all accounts activated Windows 8 throwing this kind of errors. They surmised that Windows 8 Pro wasn't really activated on their side when I fired up the upgrade to WMC. (?!) It sure looked activated on my side. Whatever...

Nothing short of a reinstall could be done to help it, I've been told. So I've done it, it is just a 'demo' installation for me, I don't have anything other than browser installed on it. This time it didn't need phone activation, it did everything on its own. I guess the situation really really cleared up in the meantime.

Casualty? My Google mail account in Windows Mail. I had it syncing using EAS just great, and I've lost that.
Thank you Google for not being evil, yeah.

2 more replies
Relevance 59.45%

Hi,

I am new to the forum and have searched to see if I can find a fix for my issue.

My issue is whenever I use the Event Log Online Help link in any Event Notification all I get is transferred to this page Page Not Found

I am new to Windows 8 but I used this service regularly with XP. I don't know if it is a set up issue or if the help is not available for Windows 8 ... I hope the latter is not the case as I am trying to resolve a completely different issue.

Any assistance would be great!

Answer:Event Viewer - Event Log Online Help

Well, I am still trying to get the Event Log Online Help link in Event Viewer working!

Could someone tell me what their data values are in the following registry entries:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\EventViewer\MicrosoftRedirectionProgram
HKLM\Software\Microsoft\Windows NT\CurrentVersion\EventViewer\MicrosoftRedirectionProgramCommandLineParameters

My data entries are blank and I am sure there should be something .

Thanks

7 more replies
Relevance 59.45%

Hello, I am having another strange event in my event viewer this time its this: A parity error was detected on \Device\Ide\iaStor0. Source: iaStor Event ID: 5 I have researched but nothing specifically addresses this issue, only similar event IDs with different error messages. Any help would be greatly appreciated.

Answer:iaStor event in event viewer

This error occur with this error usually :
Windows Event ID 9 from iaStor

3 more replies
Relevance 58.63%

Hi, I recently made some upgrades to a (previously fine) PC - they were

- Installing 4GB extra RAM, of the same variety
- Reinstalling windows on a new SSD (a Samsung SSD 850 EVO 500GB)

I previously also upgraded to Windows 10, but a bunch of blue screens and other issues later I reinstalled 7. I'm still having problems though - the current symptoms are that every so often (1-3 times a day) the computer will hang for ~1-2 minutes on the 'starting windows' screen. When it finally loads, it will often hang for further extended periods before settling down. I checked in these event log and during these periods there will be many 'atapi' errors, with Event ID 11 "The driver detected a controller error on \Device\Ide\IdePort0." (I have attached a screenshot).

There will sometimes be other errors, usually relating to the timeout of certain things, but the previously mentioned error is by far the most prolific. On rare occasions there have been more serious errors - never blue screens since going back to windows 7, but once I booted to a black screen with just a mouse (was able to shut down via task manager then following a restart seemed ok).

Through some investigation, it does seem to be that the root cause of the problem is the SSD; I identified this a while ago and have tried various fixes, including:

Ensuring my Motherboard (a M4A78LT-M) SATA ports are configured in AHCI mode (they were previously IDE). This also led me to completely re-installing windows in an e... Read more

More replies
Relevance 56.58%

Here is the list of the problems in order of which I noticed things going awry:

1. My Firefox browser will re-direct my google searches to a new Firefox window pop-up with "google-analytics" in its address bar, but would never finish loading the new popped-up window. Firefox would also re-direct and never finish loading my google searches by opening a new tab with a "directdlr.com/....." in its address bar.

2. Microsoft Office 2010 applications don't open, instead a "DW20.exe" and a "DWWin.exe" replicates itself an infinite number of times in my processes, maxing out my CPU.

3. My anti-virus applications (Spyware Doctor, Microsoft Security Essentials, avast!, malwarebytes) won't update, and therefore won't run or scan. Firefox also won't load various anti-virus sites, such as this message board.

4. Other applications crash directly upon opening them (VLC Media Player)

Solutions that I've tried:

1. Resetting my router. I'd read somewhere online that doing this would solve the problem. It did not.

2. Trying to restore from a restore point. I opened System Restore, but the restore points were all very recent and within the timeframe of infection.

3. Un-installing Microsoft Office 2010 and re-installing. System won't let me un-install.

Here are my scan reports:

DDS (Ver_10-03-17.01) - NTFSx86
Run by dildon at 14:31:20.50 on Fri 06/04/2010
Internet Explorer: 8.0.7600.16385 BrowserJavaVersion: 1.6.0_20
Microso... Read more

Answer:Browser Re-directs; Microsoft Office Fails to Load; Anti-Virus Fails to Update:upset:

Hi

Please do the following:

Download Combofix from either of the links below, and save it to your desktop.

Link 1
Link 2



**Note: It is important that it is saved directly to your desktop**

--------------------------------------------------------------------
IMPORTANT - Disable your AntiVirus and AntiSpyware applications, usually via a right click on the System Tray icon. They may otherwise interfere with our tools. If you have difficulty properly disabling your protective programs, refer to this link here
--------------------------------------------------------------------

Double click on ComboFix.exe & follow the prompts.When finished, it will produce a report for you.
Please post the C:\ComboFix.txt for further review.

14 more replies
Relevance 56.58%

Not long ago (a week and a half or so) I was playing Payday 2 and my computer froze, I turned off my computer to restart it and could not load my computer past a pre-loading windows black screen where the mouse was not showing. I then tried booting my computer in various ways (safe, with and without networking etc) and they worked, however I believe one of my drivers failing to load was the reason for my "Windows Normal" startup to fail. I eventually decided through, I then looked at using the system restore point function in order to hope for some success. The system restore function when I restored to; a week ago, two weeks ago, did not seem too alleviate my issue much, it did however allow me to load windows but almost immediately after using the machine for 2-5 minutes I would have a frozen screen again. I then eventually decided to just factory reset the machine out of desperation, the factory reset eventually happened successfully and I was able to load windows and login into my new user successfully, as I learnt that I had to reinstall my graphical drivers I then attempted to put in various CD's in in order to install these drivers, eventually when I figured out the order of CD's that I needed to install for my games to load properly, I then resumed my activities on my pc (such as gaming, browsing etc). 
 
Flash forward to the second factory reset, this one happened due to a very similar freezing problem yet again, and again I decided to turn off my computer ... Read more

Answer:PC fails to load 9/10 times and fails to update, random crashes

Have you tried Safe Mode?
EDIT: Reading failure. Try the below suggestion.

3 more replies
Relevance 56.17%

Faulting application name: taskeng.exe, version: 6.1.7601.17514, time stamp: 0x4ce79d2c
Faulting module name: svrltmgr.dll, version: 0.0.0.0, time stamp: 0x584f2bca
Exception code: 0xc0000005
Fault offset: 0x000000000021f7d3
Faulting process id: 0x1860
Faulting application start time: 0x01d29e6dedebd9b9
Faulting application path: C:\Windows\system32\taskeng.exe
Faulting module path: C:\Windows\winipbin\svrltmgr.dll
Report Id: e0417759-0a61-11e7-9c07-0050569f7630

Task Scheduler crashes and the program closes. Need help

More replies
Relevance 55.35%
Question: event viewer

If I have workgroup turned off in windows 7, can I still get a logon type 3 in event viewer? 
Security ID : Null SID
Security D:Anonymous Logon
Account Domain: NT authority 

More replies
Relevance 55.35%
Question: Event Viewer

Hi Guys - looking for advice from the experts ...

Running Windows XP SP3 and using the Event Viewer, I've got two areas of possible concern:

In Security, I regularly record Failure Audit for Event 615, and am advised to run IPSec monitor snap-in. I've no idea what this means and I don't have any programme of that name to run.

In System, I also regularly record Service Control Manager for Event 7000, and am advised that the StarOpen service can't find the necessary file. I don't appear to have such a service.

Do I need to concern myself with either of these regularly occurring features?
 

Answer:Event Viewer

Event viewer will list information and sometimes errors under System, Applications and Security.
And while that information is helpful, if you are not having problems in running your Pc - there is no reason to be concerned about them.
 

3 more replies
Relevance 55.35%
Question: event viewer

i'm using win xp pro . could i customize my mouse right click option and add event viewer to the menu using this site ....> http://www.jfitz.com/tips/rclick_custom.html as a step by step or does xp have its own easier options hidden away
 

Answer:event viewer

under what HKEY in regedit would i find the shell for IE6
 

1 more replies
Relevance 55.35%
Question: Event Log Viewer

Does anyone know of a good program (preferably free) that will allow someone to monitor event logs on 20+ Win2k machines efficiently?
 

More replies
Relevance 55.35%
Question: Event Viewer

Hello,

This morning, I started my computer and it was stuck at Starting Windows. I rebooted and got into Windows normal. I checked my Event Viewer and it says:

Any driver I need?

Answer:Event Viewer

Open the Event Viewer again click Detail tab and post a Snip.
You may have to full screen Event Viewer and Snip just the detail window to see everything, it may be a longer listing.
It may save you making multiple Snips.
That may give us more info.

I don't recognize it from the info shown.
Also check to see if you have any yellow flags next to any listings in Device Manager.
You may have to open each tab/curtain to see all the individual devices.
If there are any yellow flags post a Snip of the yellow flagged devices.

Mike

9 more replies
Relevance 55.35%
Question: event viewer

my wife's computer has problems and I don't know how to fix, hopefully someone can explain answer to me.

event viewer, then administrative, the list shows many warnings. I click help and it explains all is well.

1) should I be concerned?
2) why is warning showing?
3) can I fix it or should I fix it?

thank-you,
john

Answer:event viewer

John,

Is the computer behaving in any way abnormally?

3 more replies
Relevance 55.35%
Question: event viewer help?

Hello Team,

Im wondering if anyone could help me diagnose my issues with this pc. I seem to be slowly breaking down, pc is slow, im getting 128 bit encryption errors on sites all of a sudden, cpu usage in task manager also jumps up and down when on the internet, and everytime i click on it. It says 100cpu usage for a split second but then goes down to 0-5. Then starts jumpin again. I think my frameworks are bugged, i have framework assistant plug in 0.0.0 in firefox and cant seem to fix it. Also my flash plug in wont show up in firefox? 2nd time now i got shut down to a blue screen for you tube videos. I have tons of warnings/errors in my even log, but wondering if someone can break it down for me?

I have recently cleared it from any virus.

Answer:event viewer help?

Hi start with these How to view and manage event logs in Event Viewer in Windows XP
Microsoft Corporation

19 more replies
Relevance 55.35%

I noticed the following warning lately.

"Unable to create symbolic link for \Device\Serial1"
>The filename is "Serial.SYS"

If I look in registry, it looks like a Serial port issue.....If I then go to device manager, I see
2x COM1 ports instead of 1x COM1 & 1xCOM2 ports. I know it was COM1/COM2.

Anny suggestion on how to fix this?
 

More replies
Relevance 55.35%
Question: Event Viewer,

Hi Techguys,

I have been trying to learn more about whats happening within my system in terms of the Event Viewer.....

I have checked this application out and have discovered that it is declaring errors, warnings ect...... See below, the password thing bothers me, could anyone explain...

Applications

Event Type: Error
Event Source: True Vector Service
Event Category: None
Event ID: 1
Date: 02/06/2002
Time: 21:57:31
User: N/A
Computer: BANZIA
Description:
The description for Event ID ( 1 ) in Source ( True Vector Service ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: .
Data:
0000: 4f 70 65 6e 50 72 6f 63 OpenProc
0008: 65 73 73 45 72 72 6f 72 essError
0010: 20 35 3a 20 6f 6e 20 70 5: on p
0018: 72 6f 63 65 73 73 20 49 rocess I
0020: 44 20 38 38 38 2c 20 6e D 888, n
0028: 61 6d 65 64 20 00 amed .
Event Type: Warning
Event Source: Userenv
Event Category: None
Event ID: 1517
Date: 02/06/2002
Time: 09:29:56
User: NT AUTHORITY\SYSTEM
Computer: BANZIA
Description:
Windows saved user BANZIA\banzia registry while an application or service was still using the registry during log off. The memory used by the user's registry has not been freed. The registry will be unloaded when it is no longer in use.

This is often cau... Read more

Answer:Event Viewer,

9 more replies
Relevance 55.35%
Question: event viewer

can somebod explain the event viewer for win xp?
 

Answer:event viewer

If you're worried about the failure, double-click it for more info about each specific one. Most likely you just entered a wrong password once.
 

6 more replies
Relevance 55.35%
Question: Event Viewer

Is there any way to clear the items listed in 'administrative events' in event viewer? TIA, Richard

Answer:Event Viewer

You can execute attached batch script to delete all event logs. Make sure to execute the batch script as a administrator.

more replies
Relevance 55.35%

Dear sir I oftenly facing the problem with event viewr logful so you please give the way how to avoid the event viewr log fill oftenlyThanksMathan T

Answer:XP Event viewer comes up too often

First it depends on what is filling up the EventViewer? Are there a lot of errors or are there all Information entries?To limit the Event Log, simply rightclick e.g. Applications or System, choose properties and change the settings as.The original poster should always write the last response !!!Let us know, if the problem is solved !!!

4 more replies
Relevance 55.35%
Question: Event viewer

Hi guys new to this forum, just had a question I have been looking at my event viewer recently & warnings have popped up like the one below:

Notice it shows a link to a website that my network supposedly tries to load but this is what confuses me because I havent visited such a website, ever. Does anyone have any insight as to what may be happening here?

Thanks, Chris.

Answer:Event viewer

The original web pages tells about windows tips and tricks. but when googled, gave me options like it is a web hosting company too. May be, some site you tried to access is hosted by them and your DNS server was not able to resolve its name.

4 more replies
Relevance 55.35%
Question: event viewer

See attachment. What is ASCTRM and how do I fix it?
 

Answer:event viewer

Hello,

Google is your friend on that one. Here are a couple of links to fixes:
http://support.microsoft.com/kb/817194

http://www.windowsbbs.com/windows-xp/275-asctrm-service-failed-start.html
 

1 more replies
Relevance 55.35%
Question: event viewer

inspiron 15-5578 windows 10, in event viewer I am getting this warning.
WHEA event logger id 17.
is there a fix for this.
in dell support it says important drivers are current and windows 10 is up to date.

More replies
Relevance 55.35%
Question: Event Viewer -

Event Viewer is empty in all subcategories - When I try to open up a category ie. Application - a message appears - Unable to complete the operation, "system", the interface is unknown.

Answer:Event Viewer -

Hi, who are you logging in as, and what group memberships do you have. You can expect this behaviour I believe if you are a "guest"

1 more replies
Relevance 55.35%

Hello,

My computer crashes at random times (e.g., while watching Netflix, etc.) at infrequent intervals. However, I am able to get my computer to consistently crash while playing Max Payne 3 every few minutes. The non-Max Payne 3 crashes happen infrequently at random intervals of time. When the crash occurs, approximately 98% of the time the screen freezes and after 5 seconds or so the audio stops, then my monitor goes black and says ?No Signal Received?. The computer isn?t 100% dead when it crashes; the case fans still run and I can still open the BluRay drive. I must manually reset my computer (turning off the power) to reset my computer. On rare occasion, when something crashes, a notification pops up and says the AMD driver stopped working but successfully recovered.

What is consistent is that there is never an error for the crash in Event Viewer when the notification does not pop-up. Also, every so often, horizontal static will shoot across my screen. This only lasts for under a second though. Whether or not this is related to the crashing I?m unsure.

I've tried a variety of things, RMA'ing my GPU, Prime95, MemTest86, etc. but to no avail. I've just got it back from Microcenter, but apparently their diagnosing programs couldn't find anything wrong.

Please help... going crazy over here.

Answer:Nothing in Event Viewer

What crash are you talking about?
Freeze crashShutdown/restart crashBluescreen crash

0 more replies
Relevance 55.35%
Question: event viewer

is there a way to see all events that have been taken on my pc. Sometimes i leave my pc on and i forget to log off. and i think there is someone getting in and spying. i want to see what did they open and stuff like that.

thanks in advance.
 

Answer:event viewer

8 more replies
Relevance 55.35%
Question: Event Viewer

Hi

Does anyone have any information about Event viewer (right my computer, then click manage) and how to use it. and if you find an error in your system how do you go on about it and fix it.

cos I have got few errors but dont know how to fix it.

Please help

Answer:Event Viewer

http://support.microsoft.com/kb/308427/en-us

Errors are common and those logs are likely there since your computer was initially installed. If I were you I would clear the logs and then see if a specific error is reoccuring.

Most of these errors affect your PC very little unless your computer is blue screening, in which case it would document all the information from the blue screen.

3 more replies
Relevance 55.35%
Question: Event Viewer?

Hi folks,

I noticed lately a lot of "Sorry what ever program I had open at the time has to close because it has encountered problems" something like that.

Also a balloon has been popping up lately saying "Virtual Memory is Low" that windows is going to increase it. I checked and Virtual Memory is set at 1534MB. I have 1gig of ram running XP Pro w/SP2 current. MOBO A8V Deluxe.

In the event viewer I see a lot of warnings for (source) ftdisk (category) Disk (event) 57.

Can anyone possibly tell me what any of this means? Thanks for any and all help.

Rilla927
 

Answer:Event Viewer?

Could your computer be infected with spyware? If it's possible read this and follow the instructions: http://www.techspot.com/vb/topic50981.html
 

10 more replies
Relevance 55.35%

is there a way to find a password in my computer using the event viewer utillity. i'm using xp
 

Answer:trying to use event viewer

no. What password are you trying to find?
 

1 more replies
Relevance 55.35%
Question: Event viewer

when i open event viewer I get the message


How do I solve this?

Answer:Event viewer

Follow this thread by other user:
Event log service is unavailable?

Happy New Year!

DeanP

7 more replies
Relevance 55.35%
Question: Event Viewer

Special logon:
Special privileges assigned to new logon.
Security ID: SYSTEM
Account name: SYSTEM
Account Domain: NT AUTHORITY
Logon ID: 0×3E7
There is also been many Special logon's, User Account Management, Audit Policy Changes, Security State Changes, System Integrity and Other System Events also. 22,244 events over the last year. All logs have happened over 3 or 4 days in march 2015 and in 3 or 4 days feb - mar 2016. Any advice will be greatly appreciated. Regards... Mizred.

Answer:Event Viewer

1.  Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 
2.  Please download and install Speccy to provide us with information about your computer.  Clicking on this link will automatically initiate the download.  

 
When Speccy opens you will see a screen similar to the one below.
 

 
Click on File which is outlined in red in the screen above, and then click on Publish Snapshot.
 
The following screen will appear, click on Yes.
 

 
The following screen will appear, click on Copy to Clipboard.
 

 
In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.
 
Louis

6 more replies
Relevance 55.35%
Question: event viewer

help i get this message in event viewer i get mcafee to check download express (The McShield scanning service cannot get the TCB privilege)thanks chippy

More replies
Relevance 55.35%
Question: Event Viewer

I am getting the following error message on my Application Event Viewer log.

Event Type: Error
Event Source: AutoEnrollment
Event Category: None
Event ID: 15
Date: 10/20/2009
Time: 8:29:20 AM
User: N/A
Computer: MyPC

Please HELP!

Answer:Event Viewer

Hello and welcome to TSF marcelij !

To disable Event Viewer notifications about "Automatic certificate enrollment for local system failed to contact the active directory" every eight hours, locate the Computer Configuration -> Windows Settings -> Security Settings -> Public Key Policies branch and select "Do not enroll certificates automatically" under Autoenrollment Settings. Note that this policy will not be available until after the XP machine has joined the domain.

I hope this helps. RD

2 more replies
Relevance 55.35%
Question: event viewer

when I try to run the evenlog I get the following Event Log service is unavailable. Varify that the service is running. In the services pannel it is listed as running. However it is not. I have tried system restor but same issue. I don't know if it could be turned off in the registry or just what would cause this. I think the registry was modified and for some reason I have noticed certain registry entrys don't always get restored if you use system restore . Can someone help me maybe the great Brink I hear about. I see many other people are having this issue but no one has a fix so far. Thanks

Answer:event viewer

  
Quote: Originally Posted by bear54


when I try to run the evenlog I get the following Event Log service is unavailable. Varify that the service is running. In the services pannel it is listed as running. However it is not. I have tried system restor but same issue. I don't know if it could be turned off in the registry or just what would cause this. I think the registry was modified and for some reason I have noticed certain registry entrys don't always get restored if you use system restore . Can someone help me maybe the great Brink I hear about. I see many other people are having this issue but no one has a fix so far. Thanks


Repair install from the win 7 dvd.

7 more replies