Computer Support Forum

Webcam and intergrated webcam not working after latest upda...

Question: Webcam and intergrated webcam not working after latest upda...

After the latest Windows update, MY webcam stop working also my intergrated webcam stopped working too. Even all the webcam apps the cam doesnt work at all. I went and relaoded the drivers and they still dont work..PLEASE HELP!!!!!! Thanks

More replies
Relevance 100%
Preferred Solution: Webcam and intergrated webcam not working after latest upda...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 85.26%

Recently my webcam has just stopped functioning. This laptop is brand new however and I just got it on the 14th.
I have no clue why it wont' work anymore. I checked under device manager and under Imaging devices its called "facap, FastAccess Video Capture".
I enabled it, for some reason it had become disabled, and it wouldn't work. And it seems no Driver updates are available. Also have tried reinstalling the driver but it didn't work. I then uninstalled the old driver and tried to install the driver and it failed. So I used Windows Restore Point feature thing. Now its just disabled.
Any ideas on how to fix it?

Answer:Webcam Not Working. Alienware M17X, Intergrated Webcam.

I found my solution!    Though... it kinda is a "Doh!" kinda thing.
Apparently FN+F9 will enable or disable the webcam!
It seems that I had done this inadvertently at some point and turned it off, and while messing around for a solution the other day, II tried the combo it turned back on the webcam!
Quite a powerful key combination I have to say if manually enabling the web cam and reinstalling the web cam driver don't do anything.

36 more replies
Relevance 104.55%

I keep getting error code 45 whenever I go to it in device manager and its not working for any apps. I have uninstalled it many times and updated my drivers so I have no idea what to do now. Any help is appreciated

More replies
Relevance 104.55%

Hi, sorry if i'm posting a question that may have already been answer but i couldn't find anything specific to my problem.  I have having an issue with the intergrated web cam on my x200.  It was accidentially deleted from my computer and now i can't get the driver to install.  I've tried to download the driver from the Lenovo site but it doesn't seem to be working.  I don't know if i'm doing something wrong.  If someone has any idea as to how i can get it to work again please let me know.  Any help is much appreicated. Thank you

Answer:Intergrated webcam for X200 not working

Same problem for me

10 more replies
Relevance 90.61%
Question: intergrated webcam

since I have upgraded to windows 10 (from windows 7) i can not find a driver to get my camera working any sudjestions ? The notebook i am using is a Lenovo T430 i5 32 bit machine

Answer:intergrated webcam

Hi Jim,
 
Welcome to Lenovo Community! And happy to have you here.
 
As I understand that you have query regarding Integrated Camera in T430 
Please use this driver, may be this will help you.
 
Please feel free to post in Lenovo Community Forums if you have any further queries!
 Regards,Prabhansh_______________________________________________Tap that Kudos button if I helped.If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

1 more replies
Relevance 90.61%

I used to be on Vista but now on Windows7 and webcam doesn't work without going onto skype or other. No icon like there used to be.
I still have the cd for the software that came with laptop but it's for Vista.
Would this still work or would i have to download software for Windows7?
Or would it be better just to buy a plug and play

Answer:what to do about intergrated webcam

Make and model of laptop may help.
The webcam obviously works but you need to know how to launch it separately.

3 more replies
Relevance 89.38%

i have a inspiron 1525 with vista that has a integrated webcam. it worked fine for a while. but then one day i tried to use it and it says that the cam is not connected. how can that be if it is built in to the computer. any help would be welcomed.
 

More replies
Relevance 88.56%

Hey, I have a Dell Inspiron 1546 with 64-bit Windows 7.

The problem with the Dell Intergrated problem seems to be a common one, I have tried many fixes and I have managed to get the software required to use it I am just missing the Webcam driver.

I do not understand as my computer appears to have the driver, and it could not find any updates for it.

I have used the Dell Driver and Utilities CD, but nothing seems to work.

Any help is appriciated.

Thanks.
 

Answer:Dell Intergrated Webcam problem

You're positive that is the make and model of the problem PC?

I was unable to find ANY drivers for that computer on the Dell site.
 

3 more replies
Relevance 88.56%

hiya

been looking everywhere for download webcam and no luck for it ..do anyone know where i can get downaod for webcam integrated. I i have xp

bec i have been formatted twice and there no found webcam eh!!! i dont understand why. now webcam is not working...this laptop dont come with cd for it bec everything already inside harddrive so i been set up twice and no found..strange.

do anyone know how?

help will be great

thanks
 

Answer:advent4213 intergrated webcam driver

10 more replies
Relevance 88.15%

Hi

my laptop specifcation here : ( [A300 - 1G5|http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new=Yes&PRODUCT_ID=1055589] ) for any needed details ..

The problem simply is, the webcam stopped working for some reason, an error messeage says "Webcam driver open fail. Please restart camera or computer".

I noticed that whenever I put the computer in sleep mode I was getting on the icon tray a notification says "USB device unrecognized"... I wasnt aware what it was - thought it becasue of the USB mouse being plugged... but I think its related to the camera...

software is installed but camera is not working and cant enable it .. I did download the latest driver from toshiba site , but still not working ...


Currently my laptop runs Vista HP SP2 32-bit, Windows defender enabled, Windows Firewall Enabled, Windows UAC enabled, Kaspersky Ani-Virus 2009 Enabled. I only use Windows Live Messenger (which up to date I think , version : 14.0.8089.726) which i used camera with, I quite using face recognition long time ago and rarely use the webcam ... I didnt install or update any drivers and used to have the laptop running perfectly..

So what happened now ?!

Answer:Satellite A300-1G5: webcam stopped working - Webcam driver open fail

Hi

I have had a similar error message and could solve this by disabling the webcam software from startup.
In msconfig -> Start Up tab I have unchecked the Chicony webcam software.
This prevents it from automatic loading.
I don?t use MSN but Skype and the Chicony webcam software is always disabled (not executed) if Skype is running.

Maybe you should try this too.

Furthermore you could try this:
Go to device manager, mark the webcam (imaging devices ? USB video device) and deleted it from the device list.
Then reboot the notebook and wait until the webcam has been recognized again.

Then test it.

6 more replies
Relevance 88.15%

it says "webcam driver open fail, please restart camera or computer"

i have done that but i dont know what else to do to fix it

please help i need it for an assignment in grade 12


all help is much appreciated

thnx

Answer:Satellite A300 - webcam not working, message says "webcam driver open fail"

Remove preinstalled version from the system and install latest version you can find on Toshiba download page.

By the way: which operating system do you use?

15 more replies
Relevance 88.15%

After looking through this forum, I have tried several 'solutions' but to no avail.

After trying to load the webcam i get the message: "Webcam driver open fail. Please restart camera or computer"

I have tried updating the Driver software for the camera, and updated the BIOS.

This message still keeps coming up. Is it worth uninstalling the camera completely then attemtping to reinstall it?


Sorry if some of this doesnt make much sense, im not entirely "computer savvy"


I hope somebody can help,

Thanks,
Ben

Answer:Satellite A300-1MC: webcam not working - webcam driver open fail

> Is it worth uninstalling the camera completely then attemtping to reinstall it?
Of course!

You should firstly go to device manager and should uninstall the driver.
You should also remove the software from control panel -> Software

After that you should clean the OS and registry using CCleaner. It?s free tool? google?
Then reboot the notebook several times and install the webcam software again.

Cheers

8 more replies
Relevance 87.74%

Hi,

Just bought an Equium P300 with built in webcam.
Have Vista service pack 1 and keep getting message open "Webcam driver fail. Please restart camera or computer."

I have uninstalled and then re installed driver. can anyone help please. Ian

Answer:Equium P300 Webcam not working - webcam driver fail

Hi

Someone had the similar issue with the webcam and posted a solution here:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=29901

The problem seems to be in the registry? but please check simply the link above.

Anyway? I?m interesting is this issue and your feedback would be appreciated?

Regards

3 more replies
Relevance 86.92%

this wass also a reply to another thread posted by romeshomey, link bellow:
en.community.dell.com/.../19989564
---------My laptop model is Inspiron 17R 5720 and Im having the exact same problem after the Microsoft Cumulative Update for Windows 10 Version 1607: August 31, 2016 - KB3176938, done Sep 4th. I was also already running Win10 and it didnt mess with Webcam Central - till yesterday when I gave the reboot necessary to install the update files.Pan/Zoom/Position Arrows show as available to be used but if you try to use then, nothing happens and back to full zoom. Only thing it allows me to do is to change to Face Tracking.I called Dell Suport Center and for about 2 hours I ran diagnostics and tried possible solutions with the tech assistant but he wasnt very helpfull at all. All diagnostics came back with positive/OK/passed results and they offered me a paid support to fix the problem. Not exactly a good solution, is it?It was clear though MS updates messed up with the webcam driver - I checked myself at Devices/Imaging there was an update for the driver done exactly when MS updates were done. Unfortunatelly, the rollback option wasnt available. For that matter, I decided to uninstall the whole Windows KB3176938 and CAPICOM (what ever that is) updates done using Control Panel/Updates but no-go. Next step was to google for that problem which leaded me to other Dell Forum threads pointing to reinstall Webcam Central which also didnt work at all then I bumped into your threa... Read more

More replies
Relevance 86.92%

I've owned this laptop for quite a while and had been using Webcam Central to control the Integrated Webcam on my Alienware M17x R4.   I never had any issues using Windows 7, 8, 8.1, or even Windows 10 until my system updated on 8/20/2016 with a scheduled Windows 10 update.
After the windows 10 update my system restarted and the next time I went to use my webcam I noticed that I couldn't control the pan / zoom / or tilt or alter any of the settings in webcam central.  If I attempt to change anything it automatically changes back instantly.  For example of I move the slider to zoom, or attempt to change the pan, it auto goes back to where it was and will not allow me to change the settings.
I also notice that my mouse pointer flickers over the webcam central GUI, meaning, there seems to be some issue with the GUI after the windows 10 update, I assume is also whats causing the settings not to be changed.
I have tried uninstalling both the drivers and software and reinstalling to no avail, same problem is present after reinstallation of both drivers and the webcam central software.
Wondering if anyone else has run into this and whether there was some type of resolution.
I was able to get the pan / zoom / tilt working with 3rd party webcam software, however I would prefer to go back to using webcam central.

More replies
Relevance 86.51%

Hi all,
Everytime I plug in my webcam for my monitor (dell SP2208WFP) I am getting
a BSOD with the error above. I am not sure which part is causing the BSOD
because this monitor has a builtin webcam + mic and 4x usb ports.
I've downloaded the latest driver for this device and installed it =, but
the problem isn't fixed when this is done. As soon as I plugin the webcam
the computer crashes and has to restart:
Dell SP2208WFP Monitor Driver | Dell US
I've read some posts on disabling some drivers in order to work around the
problem, I don't know exactly what I need to disable. I'm also not finding
the webcam in "Imaging devices", not sure where it is in the device
manager.
Any help appreciated.

More replies
Relevance 86.51%

I got a new laptop(Windows 7) a couple of months ago. Everything's been running smoothly. I use the XPS for everything. School, gaming(which is a major portion of the harddrive).

A couple of days before Christmas my webcam started messing up. My webcam went black on the MSN screen, but the light was still on.

I've tried common solutions, disabling the webcam, uninstalling and installing the driver and nothing works!

Any help would be so appreciated! Thank you!
 

Answer:Solved: Intergrated webcam problems; Dell XPS L520X

I found a strange and simple solution. The webcam didn't have enough light to start up and so it just showed up as black. I put my Iphone up the webcam and the brightness jumpstarted the cam. Just in case anyone else was have the same problem. Have a nice day! ^^
 

1 more replies
Relevance 86.51%

Hi all,
Everytime I plug in my webcam for my monitor (dell SP2208WFP) I am getting
a BSOD with the error above. I am not sure which part is causing the BSOD
because this monitor has a builtin webcam + mic and 4x usb ports.
I've downloaded the latest driver for this device and installed it =, but
the problem isn't fixed when this is done. As soon as I plugin the webcam
the computer crashes and has to restart:
Dell SP2208WFP Monitor Driver | Dell US
I've read some posts on disabling some drivers in order to work around the
problem, I don't know exactly what I need to disable. I'm also not finding
the webcam in "Imaging devices", not sure where it is in the device
manager.
Any help appreciated.

Answer:ks.sys BSOD when connecting intergrated webcam for Dell SP2208WFP

Please read and follow the instructions here: Blue Screen of Death (BSOD) Posting Instructions

3 more replies
Relevance 85.28%

My computer is fairly new...that's why this issue is driving me crazy! I use skype and messenger a lot because I'm currently stationed in Europe. When I first arrived everything worked great. Then, the voice went out on Skype so we started using Yahoo messenger..then the camera went out on messager...I went and bought both an external webcam and microphone and neither would work at the same time but every once in awhile one would work. Currently I can get voice on skype and that's it. Skype doesn't even give me the option of a webcam anymore and when i try with messenger it says no connection found. I'm not a computer smart person and I've tried and tried to get the camera working. I have no idea what to do about it now..I'm almost to the point of just buying another computer. I would love to be able webcam and talk at the same time!! Please help!!
 

Answer:HP webcam not working, messenger says no webcam found.

i have moved to hardware forum

take off the external microphione and webcam - lets see if we can get the intergrated devices working first

exact make and model of the PC
what windows version XP, vista ?

goto device manager
----------------------------------------------------------------------------
{Device Manager}
Post back the results in device manager
Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} > network adaptors, click on the + > post back the devices listed there
are there any ! ? or X

for windows 7
start > control panel>
System and Security>
Device Manager

the camera should be under imaging devices
post back a screen shot

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here.
----------------------------------------------------------------------------
Microphone
I need to know the windows version for microphone to see if muted
vista
on the speaker icon in the bottom right hand corner of the PC screen
speaker icon bottom right hand side
right click
playback devices
click on speaker
properties button
levels tab

should see microphone - is it muted
----------------------... Read more

3 more replies
Relevance 84.87%

I have been having issues getting the intergrated webcam on my ThinkPad T520 to work with any Flash Player based sites when I am using IE. It works fine from Firefox and Chrome but for some reason IE will not work. I am using IE11 so cannot roll back Flash Player to older version to test this. The webcam drivers are up to date. I tried uninstalling them and reinstalling with same issues. Webcam works with non Flash Player websites with no problem when using IE. When I plug in a USB webcam I can use that Webcam with no issues in IE on these Flash Player sites. I have ensured that I have the Shockwave player Plugin enabled and when I get the pop up from Flash Player  setting to allow it. Nothing I have tried has seemed to work. I have tried this on my Acer computer and it's intergrated webcam works fine with IE11 on these Flash player sites.I tried this from multiple ThinkPad T520's here at work with same results. I thought it might be our network but my personal computer worked without a problem on the same network. Please help.

More replies
Relevance 75.44%

To save agony for fellow IBMers, be aware that if you use System Update to update to the latest driver for the webcam, you may find yourself unablke to use Sametime 9, both standalone and integrated in Notes.  Smartcloud also crashes (disabling sound).  You can roll back to the previous webcam driver to fix this.  I use SUT and I don't know if this issue only affects SUT users.  Anyway I hope this helps, and also if anyone in Lenovo that can help is watching this, please be aware of the issue.




I am a former employee not a support professional so any help I offer here is as a fellow user.

More replies
Relevance 74.62%

Hi,

I have updated to latest BIOS 6.70, all in order except web cam is not available any more. Before you ask I have updated the drivers for the web cam however win7 64 I have can not detect the device. It worked fine before BIOS update tho. I have also checked the BIOS setting and web cam is enabled there.

Any suggestions how can I fix it. Is there any way to revert to previous BIOS?

Please help.

Answer:Satellite C850-175 - after updating to latest BIOS webcam does not work

Hi

Is the webcam listed in the device manager?
Can you see any webcam entries (Image Device - Toshiba webcam) in the device list?

Please check this since the webcam device should appear even if the webcam driver would not be installed.
In such case you should see an unknown device

3 more replies
Relevance 73.8%

I have a Satellite M305d-s4830.
My PC's operating system is Vista 64bit.

Cam and mic were working fine until one day the camera assistant software started showing a messagebox saying that: "Webcam driver open fail. Please restart the camera or computer."

Since then I tried everything that comes to my mind, but I think neither the cam nor the mic appear in the device manager. I also have the recovery disk for Toshiba.

What am I supposed to do?

Thanks in advance

Answer:Satellite M305D-S4830 - Webcam driver open fail - Now webcam & mic does not work

Hi

> Since then I tried everything that comes to my mind, but I think neither the cam nor the mic appear in the device manager
Hmm? you mean the cam is not listed in device manager?
Neither an unknown device nor near a yellow exclamation mark?

Sounds like hardware issue? but try to recover the notebook using recovery disk.
If this will not help then it means that there must be something wrong with the cam?

I read in the net that some people had a similar issue.
The webcam worked when opened the laptop lid only halfway.
But webcam disappeared when the lid has been moved up.
Possibly there was an loose contact between the cable and cam?
In such case the ASP technician should check the notebook?.

1 more replies
Relevance 73.8%

Hey guys

just got my mate to upgrade me to win 7 64bit.
Now my camera wont work. I had to re-install the drivers (they only had the vista drivers) - Can anyone help?

"webcam driver open fail. Please restart camera or computer"

Cheers

Answer:Portege M800: webcam does not work Win 7 64bit - webcam driver open fail

Hi

Seems you have used wrong or not compatible webcam driver/software?
You should use an Win 7 64bit Chicony webcam software.

> Now my camera wont work. I had to re-install the drivers (they only had the vista drivers) - Can anyone help?
The Portege M800 Win 7 drivers are available on the Toshiba European driver page.
You will find also the Win 7 64bit Webcam driver 1.7.260.0526

Please remove firstly the old driver, then reboot the unit? clean the OS using CCLeaner? reboot the unit again and then install the Chicony webcam software.

Greets

2 more replies
Relevance 73.8%

Hi,My webcam used to function well - the screean play was always on the right direction and it rotated with the screen appropriatly while i was rotating the tablet.Suddently it stopped:1. it is showing me on an upside down landscape mode ("secondary landscape")2. doesn't rotate when rotating the tabletI've tried many solutions, including re-loading the driver and uninstalling applications such as skype, but nothing works. Would appreciate any assistance.Thank you,Daphna

Answer:x201 tablet webcam problem - integrated webcam upside down + won't rotate

trying again

4 more replies
Relevance 73.8%

Dear All, During reinstalled the Window 7 for the new harddisk, I am fail to installed the webcam driver at the last step (all other drivers all installed and ok), the fail message said "Camera device cannot found!" and set up fail.  Does anyone has the same problem? Thanks a lots for your help.













Solved!

Go to Solution.

Answer:S10 3t webcam driver installation problem (can't use webcam in MSN or face detect login)

Try holding the Fn key and pressing escape, this should turn the camera on.

3 more replies
Relevance 73.8%

Installed Webcam driver ( webcam-20080519191643.zip )
When load PC error: " WebCam driver open fail. Please restart camera or computer "

http://photofile.ru/users/romikok/135126109/137170363/
http://photofile.ru/users/romikok/135126109/137170362/

What can i do ???

HELP, plz )

Answer:Satellite L300 - WebCam issue: WebCam driver open fail

Have you installed service pack 1 for Vista and latest windows updates?

If not, please update. One thing you could try is to completely remove the drivers, using some registry cleaning tools like ccleaner and reinstall camera drivers.

3 more replies
Relevance 73.39%

My new Lenovo X300 came with integrated webcam drivers but no application software to run it.  What software application do I use and where do I get it? Thanks.

Answer:X300 integrated webcam does not inclide webcam software application

Use yawcam from Yawcam.com

2 more replies
Relevance 73.39%

There's a problem with my G580 involving the webcam indicator and the webcam in general. I had installed a bigger harddrive and reinstalled Windows 8. Whenever the computer goes into sleep and wakes up (from being idle) the webcam indicator light will stay on forever until I reboot. Letting it sleep and waking it up will recreate this issue. I tried it out on a store model and it did the same thing.  Is there not a fix for this?Also, when uninstalling Lenovo EasyCamera, it reinstalls on boot up. Is there anyway to disable the webcam completely and kill the drivers? Thank you. Fresh windows 8 install. Lenovo drivers that are installed consist of the Audio, Graphic and battery drivers.

Answer:G580 problems with webcam indicator / webcam drivers in general

Hi z888,
 
Thanks for posting and welcome to the Lenovo Community,
 
I?d like to confirm to you that having the indicator on is normal and not a problem,
 
But if you?d like to disable the Camera kindly be sure that you?ve installed Lenovo Power management for windows 8 and check the below link for the software if you don?t have it:
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS032506
 
And then please press on Fn and ESC buttons together at the same time to disable the Camera,
 
Another way to disable the camera drivers as you can open Device manager windows and underneath Imaging Device and you disable it or uninstall it.
 
Hope the information helps. Let us know.
 
Regards
 

Soha






Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Relevance 73.39%

Hiya,

firstly I am not sure if this is a warranty issue, but I always seem to be geting in post the closure of the offices at the moment.

The new laptop seems to occasionally play up and suggest the USB device not recognised.
On top of this the webcamera is not listed in the hardware settings.

I have tried re-installing the webcam drivers, but although they install ok the computer cannot actually find the webcam, i.e. its not listed in system devices, and forcing Vista to look for the camera does not result in any luck. (the microphone adjacent to the webcam works fine).
Every time I start the computer it now tells me I need to restart the webcam or the computer.

I am running Vista 32 bit, the 250D being a 1.9Athlon core duo with 2GB ram and definetly comes packaged with a webcam (I do seem to recall the little blue light coming on early during setup but never again since).

Is it worth doing a hard re-install, although Windows is normally pretty good at picking up new hardware surely??
I have had a look at the other webcam issues but the drivers are no good as I cannot actually make the webcam do anything.
I have been onto the Warranty page but trying to enter the Serial no. it says it doesn't exist.

Any ideas?

Thanks, Jason

Answer:Satellite L350D - Webcam doesn't work - webcam must be restarted

* Download the updated Chicony Webcam driver from the Toshiba website drivers section. If you cannot find an updated driver, try a newer driver from another Toshiba Model.
* Install Vista Service Pack 1, or Vista Hotfix KB934374: http://support.microsoft.com/kb/934374 (KB934374 is included in SP1)
* Update your Messenger software (MSN/Yahoo Messenger, etc..)
* If you have another program that can use the webcam (Skype for example), make sure they are completely closed, and not sitting in the System Tray.
* Try closing the Camera Assistant Bar on the left of the Desktop.
* To stop the Camera Assistant software from running on startup, run Regedit and delete "Camera Assistant Software" from HKLM\Software\Microsoft\Windows\CurrentVersion\Run \

1 more replies
Relevance 73.39%

I installed hardware,when I plug in webcam computer says hardware installed,but when I get to the "Control Center screen it says "No Webcam Detected.I have Windows 7The webcam is a Kodak Dual Webcam{D101?} [ D101?}

Answer:kodak dual webcam webcam not detected message at Contrl Cn

You might have installed the hardware through Windows 7, but did you install the drivers? Go onto Kodak's website and download the appropriate package for your camera and OS and re-install the camera that way. Hope this helps!

2 more replies
Relevance 73.39%

Hi,

I need some help regarding the integrated webcam of my Satellite A200.

Everytime I start the laptop I keep receiving a message saying that the webcam drives has failed and I have to restart the computer, but the problem persists.

I have downloaded an updated webcam driver, but nothing.

Can anyone give me an idea of what is going on?

Thanks!

Answer:Satellite A200 - WebCam issue - webcam drives has failed

Hi

Are you using the Toshiba preinstalled OS? Is it Vista or Win XP?
As far as I know Vista needs Sp1 and other MS updates in order to handle the 3rd party software and drivers correctly.

I?ve got internal webcam and I?m using in with Vista and Win XP.
I have removed the webcam software from startup in msconfig.
This prevents the webcam from automatic startup while windows booting?
You should do this too?

4 more replies
Relevance 72.98%

Hey guys, just wondering if anyone knows the best software to live steam my webcam over the internet so I can check on my house when I'm at school/work

anyone help?
 

Answer:Webcam software? How to live steam my webcam on the internet

TimeSnapper Take screenshots of your day = http://mail.computeractive.co.uk/cgi-bin1/flo/y/erBv0Dkwyr0Rr70DFqa0EH
http://www.webcamnow.com = "Incorporates most of the Videochat features into one web page including Viewing, Broadcasting and Previews."

Yawcam = http://www.snapfiles.com/get/yawcam.html
ConquerCam = complete webcam software package for your web cam: http://www.theill.com/conquercam
vcsetup.exe = http://downloads.suntimes.com/product.php[id]79026[cid]188[SiteID]suntimes
http://www.cambrosia.com

http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx = "This PowerToy lets you take pictures at specified time intervals from a Webcam connected to your computer and save them to a location that you designate."
 

2 more replies
Relevance 72.98%

hi, please help, Hp 620 Media Player cant play, webcam cant open saying " no webcam detected.", and currently been stuck on updates page for nearly 3 hours.

More replies
Relevance 72.98%

I have a sony vaio with built in webcam however the webcam hasnt worked for ages!
The little yellow light next to the camera lights up when i start the webcam but the screen is black. I have tried device manager-control panel but it says all the software is up to date and that the camera is working
 

More replies
Relevance 72.98%

Hi

When chatting in skype my webcam turn on and off all the time (the indicator light turns off and on in unison with the video). Also the quality is poor. There is a lot of lag when watching myself (and also on the computer receiving the video). Seems like it's a 1 fps or something. I've checked and the driver is up to date, and I've reinstalled the virtual webcam thingy.

Help please!
 

Answer:Asus usb2.0 uvc 2m webcam / virtual webcam issues

Go to speedtest.net and confirm your connection speed is what it should be.

Are you having trouble streaming movies or audio online?
 

2 more replies
Relevance 72.98%

I was mortified when I recieved this message on a laptop that was barely used but was now over one year old. Troubleshooting steps on Lenovo's site ended up referring to repair shop.   I watched a few video's on how to service the LED LCD display and looked over the service manual to find a solution.  Disclaimer Note: I take zero responsibility if you do this and fail or damage something. My unit was out of warranty and I have a lot of experience inside these things. So what works for me, may not work for you. 1. Completely shutdown the computer.  The machine must be totally shutdown and not in a sleep mode.2. Unplug AC/DC power adapter3. Removing the bezel around the LCD display was easy.    -be very gentle prying this off with your finger tips from the inside lip and don't put any pressure on the LCD screen. Any pressure on the LCD screen especially the bottom edge can cause damage.    -start at the top center of the bezel and work down each side and do the corners and bottom last.4. Re-seating the tiny cable connected to the webcam was not so easy; but, I did it with a plastic prybar, bright light, and magnifying glass.    -if not carefull here you could easily do some damage.5. Loosen up the slack on the cable by re-routing it a bit.6. Carefully snap the bezel back on. (It turned out that the cable does not stay connected because of to much tension on the cable. Basically the cable is a bit to... Read more

More replies
Relevance 71.34%

Hi, I bought Lenovo X220 Type 4290-B21 but it has no webcam. I have possiblity to buy geniune webcam for X220. It is possible to install webcam by myself. Could someone to help me solve my problem.Thank you in advance,Chris













Solved!

Go to Solution.

Answer:Lenovo x220 webcam. How to install new webcam?

Hello and welcome,
 
Have a look at page 92 of the Hardware Maintenance Manual
 
Z.

3 more replies
Relevance 71.34%

Hi all,So, as the username hopefully indicates - a newbie to the x200s, which I bought recently, though I've been using thinkpad products for a few years now (a devoted fan!)My x200s did not come with a webcam and, since I am thousands of miles from home, I reckoned I would try and install one manually. Note that I have swaped its HDD for an SD & changed keyboard in the past with no problem, so I was assuming (foolishly, perhaps!) that vaguely knew what I was doing.I followed the instructions and user experiences on this thread, I purchased this camera - and got off to work.Even though everything seemed fine when adding the camera to the system, a strange thing happened after I rebooted (I run Linux Mint 16): neither the webcam, nor the thinklight were now working. After lots of testing, I assumed I must have just destroyed part of the cable during installation, and so I purchased this cable (Lenovo ThinkPad X200 LCD Video Cable 44C9909) and tried again. Same result! The only difference is that the first time round, an "lsusb" command on linux would return a Ricoh product (and I assume that's the webcam), but it would still not be recognised by Mint, while now, there's nothing. In both cases, the Thinklight didn't work.Since both the thinklight and the webcam come out at the same end (see the right end of the cable on this picture) I am assuming, of course, that the two are related.Would anyone know which of the clips on the left end of the cable on the same picture, abov... Read more

Answer:X200s tried to add webcam - now neither webcam, nor thinklight will work

Hi,
 
perhaps HMM and Service Video might help.
Be sure integrated camera is enabled in the BIOS Setup menu.

6 more replies
Relevance 71.34%

I have a amcap webcam 3.85mm 10x webcam with no software!! Can someone please help???? Thank you!

Shawn Stopper
 

Answer:amcap webcam 3.85mm 10x webcam with no software!!

Try this: http://noeld.com/amfaq.htm or http://noeld.com/programs.asp?cat=video.
 

1 more replies
Relevance 71.34%

I hope this is the correct place to ask this question. I haven't wanted to ask because I was worried about where. Please move this if it's wrong.
I also need to repair drivers on my computer. the MMDRIVER.INF file is missing or damaged. It says use the windows disc 1 to system32 directory.
The problem I'm having is that suddenly my webcam doesn't work. My daughter gave me the computer, but never bothered to give me the CDs for it. Is there anything I can do to repair this without them?
Thank you,
Sudsy
 

Answer:Webcam driver needed & how to reinstall webcam

have you tried your computers own website for your drivers and downloads put in computer name and model number and operating system usaully found in computer properties regards lisa
 

1 more replies
Relevance 68.88%

I am using a video surveillance program (webcamXP), and I would like to use both my integrated webcam (laptop) AND my logitech webcam (C310) as sources; however, it looks like my integrated webcam is not accessible when I plug in the UBS webcam. From the program's perspective, there is only one source which corresponds to whatever webcam is available (integrated webcam when USB is unplugged, and vise versa).

I would expect both sources to be available. I'm thinking somehow the computer is seeing the USB webcam and just overriding the integrated webcam. Is there anything I can do to verify this and/or change it to make both available?

It's totally possible that it could be the program, but I was unable to find any settings to get it working.

I'm running Windows 7.
 

More replies
Relevance 68.88%

I never had internal webcam. I have seen other computers where the webcam is on and it is shown on desktop. Is there aprogram for Lenovo S10 that does this? Also allows to take pictures when on desktop? Appreciated, thanks.













Solved!

Go to Solution.

Answer:S10 Internal WebCam-How To See Webcam On Desktop?

Hi,i gave you the answer in your last post... ""Cam itself can be used with program like any messenger ...or with Lenovo Easy Capturehttp://consumersupport.lenovo.com/en/DriversDownloads/drivers_show_931.htmlworks under XP too...or with veriface face recognition...http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-71709 ""in most messengers.. icq,yahoo messenger, skype....and so on.. you have a menue to configurate the webcamyou can use simply basic cam functions without any installation... Open the Scanners and Cameras wizard by clicking theStart button , clicking Control Panel, clicking Hardware and Sound, and then clicking Scanners and Cameras and see yourself... can take pics... thats alll... more you can do with  Software  Lenovo Easy Capture... take pics & vids, change size ....try it.... sincerely KalvinKlein        

9 more replies
Relevance 68.88%

I have an HP 100B All-In-One PC and it looks like it has a built in webcam at the top of my monitor, but I keep getting an error code, "We can't find your camera". What's a gal to do?

Answer:Webcam not found. Do I have a built-in webcam?

No. Your PC does not come with a webcam, according to the specifications. See the link below for the specs.http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c02728709

1 more replies
Relevance 68.88%

Hello,

Lately i found a webcam wich i haven't used for quite some time. I plugged it in, but the Windows XP Pro SP3 detected the webcam as an unknown USB device. I cannot find a driver manually, becouse i lost the package in which the webcam was in when i bought it, and there are no manufacturer nor model name written on the webcam itself. I disassembled the webcam and below are all the writings i found on the chipset:

PAL-A 94V-0
E197709 0744
TCI 12,0000
C1071119N
PN:001-261202-801 (or PN:001-26120L-801, couldn't excaly see which one is it.)
Rev. B1


I hope you guys know what thoose numbers means and you could help me out with finding a proper driver. I tried to google them all, but with no result.

Thanks in advance,
mussler

Answer:Webcam driver for unknown webcam.

Could you possibly take a picture of the webcam? Quite a few people don't take apart their cams, but know what they look like.

3 more replies
Relevance 67.24%
Question: Webcam not working

Upgraded from 7 to 10 Plugged in my webcam :"Microsoft LifeCam Cinema". Checked device manager,which says it's working correctly. Can only get a picture in Skype-on other sites the light comes on the webcam,indicating it's switched on, but there is no picture. Have already downloaded the latest drivers.

More replies
Relevance 67.24%

my webcam is not working.when i start this its giving an error that webcam intialization failed.plz help??
 

More replies
Relevance 67.24%
Question: webcam not working

hey guys am using hp pavilion dv6700 notebook pc and i have upgraded the os to windows 7 ultimate 32-bit(6.1,build 7600) from vista and the problem is my WEBCAM is not working properly (it was working well in vista) . It is sometime working as soon as the restart and sometime not working dono what is the exact problem . am confused . skype saying "cant start video renderer.check youve got a valid directX installation " but i installed the latest directx for from the nvidia ma graphics card is nvidia "Getforce 7150M/nforce 630M " and i hav tried the cyberlink you cam (it worked for a day after that it didnt work ) and also i ried many cam both didnt work please someone gimme a solution . thanks

Answer:webcam not working

  
Quote: Originally Posted by harryblues


hey guys am using hp pavilion dv6700 notebook pc and i have upgraded the os to windows 7 ultimate 32-bit(6.1,build 7600) from vista and the problem is my WEBCAM is not working properly (it was working well in vista) . It is sometime working as soon as the restart and sometime not working dono what is the exact problem . am confused . skype saying "cant start video renderer.check youve got a valid directX installation " but i installed the latest directx for from the nvidia ma graphics card is nvidia "Getforce 7150M/nforce 630M " and i hav tried the cyberlink you cam (it worked for a day after that it didnt work ) and also i ried many cam both didnt work please someone gimme a solution . thanks



You may be able to install a vista driver by installing it in "compatibility mode"

You do that by right clicking the installer>properties>compatibility>choose vista

Let us know if you need additional assistance.

Ken J

2 more replies
Relevance 67.24%
Question: Webcam not working

Hi all,

I've just bought a new Advent 9515 laptop which has an integrated webcam. But the webcam doesn't seem to be working? do i need to do something ?

Thanks
 

More replies
Relevance 67.24%

I upgraded from Win7 Home Premium 32bit to Win7 Ultimate and now my webcam is just shows black screen...
BTW im using ASUS laptop, so usually the green light on my laptop turns on, but now its not on..
I'm not sure, but i think its the problem with drivers

Answer:My Webcam Is not working

LukeIsBack, Welcome to SF. I would go the the ASUS website and check for all updated mobo and other drivers and install.

9 more replies
Relevance 67.24%
Question: webcam not working

hey guys am using hp pavilion dv6700 notebook pc and i have upgraded the os to windows 7 ultimate 32-bit(6.1,build 7600) from vista and the problem is my WEBCAM is not working properly (it was working well in vista) . It is sometime working as soon as the restart and sometime not working dono what is the exact problem . am confused . skype saying "cant start video renderer.check youve got a valid directX installation " but i installed the latest directx for from the nvidia ma graphics card is nvidia "Getforce 7150M/nforce 630M " and i hav tried the cyberlink you cam (it worked for a day after that it didnt work ) and also i ried many cam both didnt work please someone gimme a solution . thanks

Answer:webcam not working

Please delete the other thread.

Reinstall driver. Update graphic card driver also.

3 more replies
Relevance 67.24%
Relevance 67.24%
Question: Webcam Not Working

webcam not working...not in the list in device manager...i have cyberlink youcam ver 7....

More replies
Relevance 67.24%

The webcam in my Laptop is giving blurry image and the no color options are coming up. How to fix the problem.

Answer:Webcam in G50-30 not working

Dear vaanivilaas,
 
Welcome in lenovo community,
 
Could you please tell us, what is you laptop operating system?
and if any software changes has been made or not?
and kindly send a screenshot from the device manager showing the Imaging devices and another one for the camera view.
 
Regards,
Joseph

9 more replies
Relevance 67.24%

Alright, so, I have no idea where to ask this question.. so I just asked it here. But, anyways, my laptop has a webcam built in it, and I've never had a problem with it up until now. I've had it for over a year. Now, when I open the webcam, it displays a lime green screen. I have tried re starting my computer, opening and closing the webcam, and even hitting it. Nothing is working. Please help me. I'm illiterate when it comes to technology.
 

Answer:Webcam not working. fml.

The application for your cam has a lime green screen or the whole notebook screen goes lime green when you start the cam up?

Not a good idea hitting the web cam in the lid there, have you uninstalled the drivers and re-installed them?

What make is the notebook? what have you done in the way of updates/adding programs, since this problem started?

Beanie
 

3 more replies
Relevance 67.24%
Question: Webcam not working

HI i reformat my pc and install win 7 after that i install a cheap plug and play webcam. And use yahoo messenger and skype. but it cant detect my cam what should i do?
 

Answer:Webcam not working

Does the camera have any model number on it? If not, when connected, is there a yellow exclamation mark in Device Manager? If there is, right click the device and provide the Vendor and Device ID as shown in the attached image. Also, is your Windows 7 32bit or 64bit?
 

1 more replies
Relevance 67.24%
Question: Webcam not working

I just got my computer the other day and going thru the features well when trying to access the webcam it says the 3D webcam cannot be found with an error code 0xa00f4244(xc00d36d5) I looked under drivers and downloads but find where to download the software.  any help would be appreciated

More replies
Relevance 67.24%

So, I bought a brand new windows 8 Lenovo Z70 laptop, and the webcam is not working. In fact, it doesn't even show up in the device manager, even as an unknown device. It is possible that I accidentally deleted the software for it when I was getting rid of all the useless junk that comes preloaded and didn't notice it at the time (does anyone know what the name of that software is?), but even then it should still show up as unknown device. So far, I've tried installing several different webcam drivers/software from the support website, as well as a full system restore to when I first booted it up, to no avail. Any help?

Answer:Z70 webcam not working

Even after a full OneKey Recovery, it still does not work nor appear in device manager. Any help please?

2 more replies
Relevance 67.24%

I have used my webcamera with SKYPE for video chat, but it is no longer working.
I believe that it may have been compromised. A few months ago while surfing the net I log onto a site when my sceen changed; it stated that it was the FBI and I logged onto a forbidden site and that I should send them $100 or face criminal charges (I believed this for about a nano-second).
I rebooted into safe mode, for it now was the only way to use my computer, and I removed the malware trogan virus. But now my webcam does not work. Under the control panel the camera states that it is working properly and it has the latest driver updates. And the same goes for SKYPE it is updated as well but seem to not be able to activate my video camera.
Suggestions, hep, please .
 

More replies
Relevance 67.24%

Hey guys,  I hope you can help me.   My webcam isn't working and I am positive it is not the actual camera that is broken.   The webcam software is Cyberlink YouCam 5and my operating system is Windows 8.1. I get this warning when I open YouCam:"Warning: No webcam detected. Try plugging in a webcam to your computer now. If you are using an integrated camera, make sure its turned on". Things I've already done: Uninstalled & Reinstalled the software.  Upgraded to newer versions of YouCam & updated drivers.Checked Imaging Devices, updated whatever was there.   Deleted the webcam from imaging devices.I did some research and found the manual to my laptop: http://media.flixcar.com/f360cdn/HP-524343201-c04526702.pdf  and saw that my laptop has a HP TrueVision HD webcam.    I'm trying to find a download link to the Truevision HD but I haven't been able to.    I would be eternally grateful if someone could tell me what to do or send me a link to the Truevision HD driver to see if installing that would work.       ANY SUGGESTIONS WOULD BE HIGHLY APPRECIATED. 

More replies
Relevance 67.24%
Question: Webcam Not Working

Product Name:  hp 15-r014txOperating System: Microsoft Windows 10 (64-bit)can't access the camera; error code 0xA00F4244(0xC00D36D5). i checked the device manager and there were neither imaging devices nor camera driver. need hel

More replies
Relevance 67.24%

My webcam worked on Skype now it stopped working on Skype and Facebook.Can you help me to get it up and running again.what can I do. Candlesnuffer
 

Answer:Webcam not working.

https://support.skype.com/en/faq/FA1267/webcam-video-troubleshooter
 

2 more replies
Relevance 67.24%

Hello, i have a HP pavilion dv2000 laptop With a built in webcam. Whenever i go on MSN to talk to my friends, i use webcam. I go downstairs to go do somthing leaving my webcam on, and my comp is turned off from updates, when i get back, i log back on and it says
"We couldn't start your camera device. Please check that your camera is not currently in use by another program, and then try again."
What do i do? How can i fix this? I hae no idea how to actually acces the webcam even though there is still the picture of the webcam beside my name in MSN what do i do? HELP PLEASE I JOINED JUST FOR THIS QUESTION!

 

Answer:Hp webcam not working

If you reboot the computer, does everything work again?
 

3 more replies
Relevance 67.24%
Question: Webcam not working

Computer is Acer M3802. 6Gb RAM, QuadQ8300 CPU,ATI HD4350 512 MB.
My webcam suddenly stopped .When I could not restart it, I reinstalled the software,but no joy. It has worked perfectly for 15 months using Skype.
The software says it could be used by another program. I got rid of MS Silverlight. No good. I tried it on my wife's computer,It worked.
I put it back in mine. No joy. Ive uninstalled Skype .Still no good.
HELP

Answer:Webcam not working

Assuming it is a USB webcam, have you tried re-setting the USB ports on the PC?

1 more replies
Relevance 67.24%

I try doing cam to cam and mine is just black
 

Answer:hp webcam not working

1) find the model number of your PC
2) go to this website and look up your model number
3) download a webcam driver for your PC
4) install the driver
 

2 more replies
Relevance 67.24%

Hi , i have a Asus Zenbook UX303L and for awhile now i am not able to use the webcam to skype or just normal camera in the laptop itself. I am using Windows 10. I have tried various method but it all does not work. I tried going to the device manager to update the legacy drive but there isn't an option to even when i click show hidden devices. It gives me the error of 0xA00F4244(0xC00D36D5) whenever i on my camera. Please help ^^

More replies
Relevance 67.24%
Question: webcam not working

yesterday I reinstalled win 7 on my PC because he was veryyyyyyyyyyyyyyy slooooooooooooooow but normally you had to put ur pc back to buying mode for everything to work but I had not read the instructions first my wireless internet stopped working but i fixed that and then I wanted to chat on skype with my friends and my webcam did not work so I tried fn + f9 normally that should do the trick but i cant get it to work so please help then i would be very happy me my pc is a medion akoia e6124

Answer:webcam not working

Hi and welcome to TSF please try here http://www.medion.co.uk/service/?dri...rs_updates.htm

7 more replies
Relevance 67.24%
Question: WEBCam not working

Hi! I am new to this forum. I am in dire need to let my built-in webcam and card reader working again.
I got this HAIER W10 Notebook: AMI Bios, Intel 3580 rev 2 chipset. running on Windows Xp Pro.
The notebook has been reformatted due to virus problem. Unfortunately, I don't have the original rescue disc and I can no longer activate the built-in webcam and card reader.
Can you please help on how to let these features work again.
Thanks
 

Answer:WEBCam not working

Welcome

You need to locate the website of the manufacturer, they should have downloadable drivers.

Looking on Google, the websites with any relevant links appear to be in Chinese only, so beyond that I cannot help as I cannot read it.
 

2 more replies
Relevance 67.24%

need to get help from some1 who could help me get my webcam working plz i have an inspiron 1521 its built in but wont be recognized when i try to video chat

Answer:cant get my webcam working

Hi, to better help, I would ask for more information. Things like where can't you get the webcam to work, has it ever worked, if it is only certain programs that can;t use it, which are they, etc.

As for the problem. Can you go to Dell Inspiron 1521 driver down load page and download the driver for the webcam. (It will be under Inpute Device Drivers).

Then go to your Device Manager (if you don't know where it is I can help you with that) and check for any yellow marks there. If there are any, please post them here. Also in the Device Manager, please uninstall the webcam driver.

Then install the webcam driver from the file you just download. See if that helps.

If you aren't sure how to do something, please post and I will give you the needed info.

Also please let us know how the problem is after this.

1 more replies
Relevance 67.24%
Question: Webcam not working

Hi,

My presario cq61-340ev webcam is not working, i tried to download the device from HP website and i install it (Youcam & MediaSmart) but it didn't work, when i try to open You cam an error message "The proram can't start because CtrlFactory.dll is missing from your computer. Try reinstalling the profram to fix this problem". What shall i do with this?? pls help.
 

More replies
Relevance 67.24%
Question: webcam not working

i recently formatted my hp pavilion 15 (touch) after which my webcam stopped working. i have installed cyberlink youcam but still its not working and it doesnt work with skype. it doesnt even show up on device manager. please help me fix this as i need to skype for business purposes.

More replies
Relevance 67.24%
Question: Webcam not working

:cryGot all drivers for my acer crystal eye webcam, but it does not show the actual camera for use, and system restore was no help! Can you help please?
 

Answer:Webcam not working

A few things to try...

1) Go into CONTROL PANEL > DEVICE MANAGER and be sure there is not a red "X" or yellow "?" by any of the drivers. If there is, click on the device and attempt to let Windows reinstall it by searching for and downloading it.

2) If this fails, go to www.acer.com, go to the drivers & downloads section, enter the exact PC model # and manually look for the most current driver for your PC and version of Windows (be sure to check if your version of Windows is 32 or 64 bit; this may make a difference on which driver to download. If unsure, go to CONTROL PANEL > SYSTEM and it will tell you if it's 32 or 64 bit).

Hope this helps.
 

3 more replies
Relevance 67.24%

My Dell 502x -XPS 15 had a network issue, which my IT guy 'sorted out' two days ago. I have been running Windows 10 on the system for aprox. 1 year now, and despite all the ''negative'' news being spread about Windows 10, I have had no real issues....up till now. I find now that my webcam and dvd/cd drive does not work. Can someone help/

Answer:Webcam and DVD not working

I'd suggest you first check webcam is turn on. Please type Settings onto the [Cortana] search box, click on 'Privacy', and then Camera.

2 more replies
Relevance 67.24%

I am using Inspiron 7348.
The integrated webcam is not working from time to time.
Error Code: 0xA00F4271(0x80070018)

More replies
Relevance 67.24%
Question: Webcam not working

I have my HP laptop with windows 8 OS. .My webcam, suddenly, started to show whatever it is on the desktop.. And not what is infront of the camera lens. It is like screen sharing in skype .
But it also works properly 2 out of 10 times.. Please help me out!!

More replies
Relevance 67.24%

My Lenovo ideapad S10-3t build in webcam camera cannot work , it always JAM ( means it work for only 1 to 2 Mins then it stop but the camera still running ) . And i had try to reinstall but still cannot . To press Shift+Esc still cannot . Is anyone know how to fix it ? Thank you .
 
 
 
 
Edit: Mod shortened & cleared  the postname

More replies
Relevance 67.24%
Question: Webcam not working

Hi im wanting to know why my webcam isnt working;I have searched all over and found nothing, i tried reinstalling the drivers, uninstalling, disabling and came up with nothing, i have a hp elitebook 840 g2 

Answer:Webcam not working

Also im using windows 10 32bit

1 more replies
Relevance 67.24%

Hi , i have a Asus Zenbook UX303L and for awhile now i am not able to use the webcam to skype or just normal camera in the laptop itself. I am using Windows 10. I have tried various method but it all does not work. I tried going to the device manager to update the legacy drive but there isn't an option to even when i click show hidden devices. It gives me the error of 0xA00F4244(0xC00D36D5) whenever i on my camera. Please help ^^

More replies
Relevance 67.24%

my webcam has a really blurry picture right now and i dont know why its a Gear Head WC535I Web Cam, what should i do??
 

Answer:My Webcam's not working!!

Bluriness, would typically indicate a hardware issue (ie: camera problem). You can try uninstalling the cam, rebooting, and reinstalling.
 

1 more replies
Relevance 67.24%

Hi, I recently purchased an S10-2 and downloaded Skype. When i tried video calling a friend, it threw up a video error at first. Said Video not available, it may be being used by another application. I disconnected and tried again, said video loading and the image was blank. I checked the drivers, found that under device manager>sound,video,game controllers, I only have Realtek high definition Audio installed. Visited the Lenovo supports and download site and I do not findand webcam drivers. All I need is for the webcam to work. And yes, the verifcase software works fine. Look forward to a speedy solution to my very basic problem. Thanks

Answer:Webcam not working on my S10-2

Hi and welcome,
Small WebCam Guide or this Lenovo Easy Capture  if that works, as you say  Veriface  works...your  cam works well... 
in normal case cam works with nearly all messenger... skype,icq,and so on...
think there is not a problem with cam .. its a problem with skype...
try to configure your cam in skype ...
Skype
sincerely KalvinKlein
 
------------------------------------------------------------------------------------------------------
Want more ? For further information to get the most of your S-Class machine
 
Lenovo Energymanagement 
 
Backup
 
Windows 7 Driver 
 
Windows 7  Install
 
Clean XP Install
 
XP Startup
 
Small WebCam Guide
 
Lenovo Easy Capture
 
Resolution > 1024 x 576 / 600  Works with XP Only For Windows 7 Alternate driver section

1 more replies
Relevance 67.24%
Question: Webcam not working

I can't get my webcam to work. It did work before but I don't know why it's not there now. It's not recognised by Skype or any test sites and I can't find a link to it anywhere on the computer. I tried downloading a driver from the Lenovo website but it does not give an option for the Thinkpad Edge 11. Can anyone help please?

Answer:Webcam not working

It looks like this is the camera driver for an Edge 11:
 
0.3M Integrated Camera Driver for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP - ThinkPad ...
 
But first, what happens when you press Fn-F6?
 
Z.

2 more replies
Relevance 67.24%

Hi , i have a Asus Zenbook UX303L and for awhile now i am not able to use the webcam to skype or just normal camera in the laptop itself. I am using Windows 10. I have tried various method but it all does not work. I tried going to the device manager to update the legacy drive but there isn't an option to even when i click show hidden devices. It gives me the error of 0xA00F4244(0xC00D36D5) whenever i on my camera. Please help ^^

Answer:Webcam not working help :(

You may try an alternative: CyberLink YouCam - Download Free Essential Version

2 more replies
Relevance 67.24%
Question: Webcam not working

Hi all,

I've just bought a new Advent 9515 laptop which has an integrated webcam. But the webcam doesn't seem to be working? do i need to do something ?

Thanks
 

Answer:Webcam not working

9 more replies
Relevance 67.24%
Question: Webcam not working

Hi, I bought a brand new Lenovo 400 recently. It came with a built in webcam. However, I could not find any utility to turn the camera on and hence still not being able to use it. Do I need to download any software for it? Can anyone please advise?

Answer:Webcam not working

try yawcam (a free download from the web)

1 more replies
Relevance 67.24%
Question: webcam not working

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows7® DeepBlue™ , Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 2038 Mb
Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 384 Mb
Hard Drives: C: Total - 39997 MB, Free - 7414 MB; D: Total - 39997 MB, Free - 14118 MB; E: Total - 36452 MB, Free - 13425 MB; F: Total - 36169 MB, Free - 16000 MB;
Motherboard: LENOVO, IGT30, REFERENCE, 2110823303521
Antivirus: Microsoft Security Essentials, Updated and Enabled

every time i run the easy capture application on my laptop it display a message saying " Webcam is Busy"
 

Answer:webcam not working

From what i found windows 7 deepblue is not a legal version of windows 7.and im going to assume that you downloaded this.everything i saw for this points to torrents, cracked, hacked, and kgen.i would suggest you get a legal copy of windows 7 and read the forum rules because they say expressly that no help can be given with torrents or the like etc.
 

2 more replies
Relevance 67.24%

lenovo g505s.i installed the lenovo easy camera yet this driver never runs,and web cam is unusable.

Answer:webcam not working?

hi gokuvegita,
 
When you get the "Webcam is unusable" error, can you try to:
-  Open Device Manager > imaging devices and see if. have built-in camera detected. If it's there uninstall it and reboot to refresh the driver. 
 
Alternatively, try to:
1. Run Windows update to get the latest patch and bug fixes to your OS
2. Uninstall the Camera Driver from the Control Panel and re-install the driver below:
 
Camera Driver (AVC, Liteon, Bison, Chicony) for 64-bit WindowsWindows 8 64Bit
cam115w8.exe26.6MB
 
Camera Driver (AVC, Bison, Chicony, Liteon)Windows 7 32/64Bit
cam118w7.exe26.6MB
 
3. If the webcam is still not detected, apply this USB binary fix and reboot:
http://support.microsoft.com/kb/2529073
 
If problem persist, the camera is probably not getting detected properly or is already defective. Try to perform a factory reset using the OneKey Recovery button to isolate if the issue is OS level.
 
 
Regards

1 more replies
Relevance 67.24%
Question: Webcam not working

Bought my laptop about 6 months ago. Skype almost every night with my kids. Now the camera shows me as if I'm in the dark.  Drivers up to day.  Any suggestions?

More replies
Relevance 67.24%
Question: Webcam not working

Built-in webcam not working... My webcam is not working properly. So I checked the ArcSoft Webcam Companion 4 to see if my camera was connected. It said "A webcam was not found or is not working properly. Please click Connect button and try again." So I click on the Connect button and it tells me "Camera not found. The camera is either being used by another application or is not connected. Make sure the cam is connected and working properly.I have tried installing Intel USB 3.0 from the official network of Sony Vaio but that also didnt work out.I have checked for windows update too." I have no idea what to do!

My laptop is Sony Vaio E series SVE15115EN. I use Windows 7 Home Basic (64 bit).
 

Answer:Webcam not working

11 more replies
Relevance 67.24%
Question: webcam not working

I am trying to use my built in webcam and it will not work i cannot find it in devices and i downloaded youcam and it says no camera is detected so what do i do next? please help Thanks !!!!

More replies
Relevance 67.24%
Question: Webcam not working

Hi, for some days my webcam does not seem to be working for any application. The webcam light however stays on. I've tried installing the webcam driver again but it's still not working. Now it says that 2 base system device not found. Please help.  

More replies
Relevance 67.24%
Question: Webcam not working

Hi all,

I've just bought a new Advent 9515 laptop which has an integrated webcam. But the webcam doesn't seem to be working? do i need to do something ?

Thanks
 

Answer:Webcam not working

ive never heard of a computer coming with a webcam. maybe the drivers need installed? does it say what brand of webcam u have? advent isnt a brand im familiar with. what version of windows do u have? maybe its not compatible with your version of windows. im only guessing as to what the problem might be.
 

2 more replies