Computer Support Forum

Where can I buy a touch screen digitizer for hp?

Question: Where can I buy a touch screen digitizer for hp?

Hi I have hp laptop with following properties: Natural Silver 13.3" pavillion x360 13 s194nr convertible laptop with 6th gen core i5 processor, 6 GB of ram, touchscreen 500 GB hard drive and windows 10. recently my touchscreen digitizer has been broken and I had such a hard time to work with my laptop. I want to replace my broken digitizer by the new one, but unfortunately I couldn't find any web site providing me a link to buy a digitizer, although I searched a lot. I lived in Pakistan and needed it within reasonable time. So, I just wanted to know if there is anyone here knows how to buy a digitizer for Natural Silver 13.3" pavillion x360 13 s194nr convertible laptop?

Relevance 100%
Preferred Solution: Where can I buy a touch screen digitizer for hp?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Where can I buy a touch screen digitizer for hp?

Hi, Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community! I have gone through your issue of touchscreen digitizer has been broken. So there are Two option: 1. If your product is under warranty then contact HP call center and asking for that hardware replacement in HP service center. So hp executive will help you as needed. Also you can call if it's out of warranty and want to fix it. 2. You can purchase online also , as few online sellers are selling that product and fix it on your own. I would recomend the option 1. Hope this will help. Thanks. ****Click the White Kudos star to say thanks********Please mark Accept As Solution if it solves your problem****




I am an HP Employee.

1 more replies
Relevance 75.03%

Hello, I bought my Yoga 260 to use on training courses where I write most of the day on-screen with the active digitizer pen. But, my hand leaves lots of marks on the document becuase the screen thinks when you are resting your hand on it that you want to draw there.  The older tabletPCs didn't have this problem.  I can't use the unit for the intended purpose because of this, i still have to use my old tabletPC. How can I turn off the touch feature, so the screen only recognizes the pen? Thank you

More replies
Relevance 75.03%

I need to replace my touch screen glass as it is broken. Mine is 2C version of it. There are people selling universal versions of touch digitizer online saying its compatible and original with Microsoft name on the top of it. I want to know how many versions of it are there in the market and which one is MS genuine product. or Are universal one's compatible and works fine with my device ? Also where can i buy a genuine MS Touch screen digitizer for Lumia 535 online india ?

Answer:Touch screen digitizer Microsoft Lumia 535

Be wary on line. You get what you pay for. A lot of them, even if they say Microsoft on them, aren't OEM, just Chinese knock offs. Also when replacing digitizer on the 535 you can't just change it and it works. It didn't for me and I had to 'dead' flash it. A Microsoft service centre can replace it, but, for the cost if replacement, why not plump for something like the 550? At least you will then have 4G LTE device and a more up to date chipset, or the great 640, or even a Blu Win HD LTE?

more replies
Relevance 75.03%

I have a T410s (2912) with a muti-touch screen running Windows 7 Enterprise - it works very well for finger gestures and such. But I'd really like to use a pen instead of my thick, sausage-sized finger. Is that possible?  A standard pencil or BIC ball-point pen has no effect when it is pressed to the screen. I called into Lenovo Support and eventually was told - nope - only your finger. Can I purchase a special "Digitizer pen" such as those for the Tablet PCs?  Or is the human finger the only input method on this screen? Thanks,JeffR













Solved!

Go to Solution.

Answer:Is there any way to use a Digitizer Pen on a T410s multi-touch screen?

You need a special stylus for a capacitive touchscreen. Search for "iphone pen" or some-such.

3 more replies
Relevance 74.21%

Please can someone help me?? I have a Microsoft lumia 535 and cracked the touch screen, being a little tight on money I decided to order a new screen along with phone tool kit and have a go myself... Following online video sourced from YouTube I carefully dismantled the phone and replaced screen have triple checked everything is seated properly and ribbon cable is connected correctly... Booted phone up and nothing! Screen is genuine... Looking on Google have found info on something called 'Nokia phone suite', with info stating a 'dead flash' is required after installing new screen for it to work although I'm not sure how accurate this info is nor have I yet attempted it as every time I try and download the programe my anti virus and firewall go nuts!!! Anyway please can someone tell me what to do really need my phone back!!! And just to confirm cracked screen still picked up some touch but not enough to use phone whereas new screen does absolutely nothing! :( :(
Thanks in advance for any help!!

More replies
Relevance 74.21%

After the install, the Acer logo appears then after about 8 seconds there are a couple lines then it goes blank. Any suggestions??

Answer:Replaced my Aspire V5-573P touch screen digitizer

If you have or can get a remote display, connect it and see if you get good picture on it.You may have damaged the ribbon cable. They are pretty fragile. You might open it up where you can gently  wiggle the cable while it's on and see if it changes.

1 more replies
Relevance 74.21%

Good day. I purchased a manufacturer refurbished ThinkPad X220t  with warranty for one year. The laptop came with a factory seal. When I turn on a notebook,  the operating system(win 7 Prof 64bit) automatically install. At the end of installation in device manager  all devices have been identified and worked fine.  But in computer details in the "system" was written ?No Pen or Touch Input is available for this display?. Then I installed all the drivers on a laptop from Lenovo website again and again. That did not help. Then I reinstalled windows (win 7 Prof 32bit). That did not help. Previously, I had two X200t and when I installed windows 7, the digitizer immediately was detected, for the good work of  the touchscreen it was necessary to install drivers. But the situation with the X220 for me incomprehensible. Explain what I did wrong. The type of ThinkPad printed on the back label is 4294-CTR(in BIOS the type is 4294-CTO).

Answer:X220 Tablet. Not working digitizer and touch screen. Help!

Try to install manually Multitouch Driver from Lenovo Drivers Download  You can find it here: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS001408 V.

5 more replies
Relevance 73.39%

How's the quality of this kind of products?
My father broke the screen of his 930 which costs a lot of money to replace, since the outer screen is the only broken part, we thought of this....

More replies
Relevance 61.5%

x201 3093-a15 touch not working but pen Digitizer is but it can see it touch in the hardware on device manager and then you go to control panel the pen tablet properties are there and click in to it and say touch in the tap also same on pen and touch too but touch is not working but pen is even spinning the screen round to see to see if that works but nothing happening. I'm using a windows 7 with i7 and with 1TB and 8GB ram. Thank for reading this hope i get help with this













Solved!

Go to Solution.

Answer:touch not working but pen Digitizer is for x201

Are you sure it is supposed to have finger touch? Lenovo shows 3093-a15 as being pen-only:http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-tablet-laptops/think...

3 more replies
Relevance 61.5%

I just upgraded my daughter's Aspire R7 (15") to windows 10. All is well except that touch and the active digitizer are not working. In the device manager everything looks good (no warnings) , under Human Interface Devices, I have an HID compliant touchscreen item that says the device is working properly and has the latest driver from Microsoft dated 2006.But I dont see anything related to Ntrig Duo sense. May be now that Microsoft bough Ntrig it is under a different name. I do have an HID compliant pen installed with latest 2006 microsoft driver. I have already done:All updatesUninstalled the HID compliant touch screen and rebooted so it reinstalls.Installed the Wintab 64 bit drivers from the new Microsoft location Questions:1- Has anyone had this issue when upgrading to W10?2- Can people have sucessfully upgraded to Windows 10 check what they have in the device manager under Human Interface Devices, and check if they have something referring to the digitizer. My next step would be to uninstall the W10 update to see if that gets me touch and digitizer back, but I would rather try everything I can under W10 first. Any suggestions welcomeThanks













Solved!

Go to Solution.

Answer:No touch or digitizer after W10 upgrade on Aspire ...

i had the same issue, there were repititve "ghost touch" on along top of the screen. i thought it was due to defective touch panel and wanted to order a new screen. but really, somehow the driver i uploaded, repaired it for me. perhaps, windows replaced the n-trig driver that you installed, and it brought the issue back?  i suspect that is what happened in your case, it was proven that the driver fixed the problem, just that, it returned. windows 10 is known to replace proper drivers with defective one from microsoft updates (especially sound driver).   THE ONLY WAY to ensure that it is NOT your touch panel acting up, is reinstall back fresh windows 8. because we did not have any of this issue back then in windows 8. only windows 10, touchscreen acting up due to improper driver.  anyway, i am still in windows 10 with latest drivers. everything works well since i installed the n-trig driver back then

10 more replies
Relevance 61.5%

Hello, I have a G500s Touch with a cracked and partially working digitizer. The actual screen works perfectly.  I have not used the touch functions of the screen much at all (especially since I went back to Win7). My question is, can I just delete the digitizer and purchase a new plastic bezel for a G500s non touch and install it.  I would assume the two use the same basic chassis and therefore this should work.  BTW, here is my actual model numbers. 20263

More replies
Relevance 61.5%

Hello So straight to the point. My Lenovo IdeaPad y70-70 touch (IPS 1080p screen) had a little accident and now touch screen is shattered into pieces. Well it's still functioning but it's kind of difficult to see through.   I was wondering if any 17 inch Lenovo laptops share the same touch screen part AKA digitizer? And another option would be.  To use plastic screen bezel from non touch version of Lenovo y70 (?or other compatible model?) after separating IPS panel from digitizer.  Also known part numbers or suggestions and where can I get them would be very welcome.

More replies
Relevance 60.68%

Hello all. My Laptop's screen is currently heavily cracked due to my own clumsiness though I've noticed that it is just the glass digitizer over the LCD. My issue is that I can't seem to find a straight up replacement part to swap over the old cracked glass. Any help finding one would brilliant. Failing that I've found the digitizer for a U350 which looks like it has identical dimensions; would it be possible to use this instead? Laptop is IdeaPad Z500 Touch as stated in the subject. Kind regards to all.













Solved!

Go to Solution.

Answer:Ideapad Z500 Touch Digitizer Replacement

Aidan02 wrote:Hello all. My Laptop's screen is currently heavily cracked due to my own clumsiness though I've noticed that it is just the glass digitizer over the LCD. My issue is that I can't seem to find a straight up replacement part to swap over the old cracked glass. Any help finding one would brilliant. Failing that I've found the digitizer for a U350 which looks like it has identical dimensions; would it be possible to use this instead? Laptop is IdeaPad Z500 Touch as stated in the subject. Kind regards to all.Take a look at this.

2 more replies
Relevance 60.27%

I have an x201 tablet and often use the pen with One Note. With Windows 10, it is impossible to lift the pen the slightest bit off the tablet without reactivating finger sensitivity. The result is that I get a bunch of scribbles from my hand touching the screen, and also inadvertantly hit other tabs etc while trying to write.Any suggestions?

More replies
Relevance 60.27%

I just broke digitizer on my Ideapad U430 20270 LCD works fine and digitizer works as well but it has a spider net on it. I found on ebay a digitizer recovered from some other U430. Can I just replace only digitizer or it will not work correctly (calibration issues)?


























digitizer.jpg ?80 KB

More replies
Relevance 59.45%

I have just received my new x200 tablet with multi touch and immediately upgraded it to WIndows 7. I can not get the digitizer pen nor finger gestures to work on the screen. This is my first tablet PC and I am bummed to have this issue on the first day. I am no computer wizard so it could be user error all the way. Please tell me i am missing something easy. Any help would be appreciated. Thanks.

Answer:x200 tablet w/ multitouch -- multi touch and digitizer pen not working

Just to cover our bases, have you downloaded and installed the latest drivers for Windows 7? Here's the multitouch drivers:http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73295 And here's all the others for Windows 7, just in case:http://www-307.ibm.com/pc/support/site.wss/product.do?subcategoryind=0&familyind=427841&brandind=10&... Forgive me if you've already done that. Other than drivers, I'm not sure what you can do to troubleshoot it. I know it works in Win 7, since I've read several reviews about the Windows 7 experience on the x200. Seth

1 more replies
Relevance 59.45%

Today my digitizer stopped working for the first time since I purchased my Thinkpad Yoga several years ago. Touch screen still works as normal. I don't think it's software related because I dual boot Windows and Ubuntu and it doesn't work in either operating system. Before it would work in both operating systems, and I haven't had any updates since it was last working. Is it possible for the digitizer itself to be broken somehow? I haven't dropped the device or spilled any liquid on it. I've read elsewhere on the forum that the digitizer is powered by a capacitor that is charged within the laptop. Is this still true for Thinkpad Yogas? Are there steps I can take to diagnose the issue?

More replies
Relevance 59.45%

Dear Sir

I have all in one pc model PX30t / Part No.6D140058Q

I need change front touch Digitizer Glass as it is broken

Will you how tell me how I can buy one and what s cost?

Many thank.

Abdulla Almahmied
Doha- Qatar

Answer:Qosmio All in One PX30t - I need change front touch digitizer glass

Dear Sir

I have all in one pc model PX30t / Part No.6D140058Q

I need change front touch Digitizer Glass as it is broken

Will you how tell me how I can buy one and what s cost?

Many thank.

Abdulla Almahmied
Doha- Qatar

[email protected]

2 more replies
Relevance 55.76%

I know that you can play games like XCOM and Master of Orion II on a touch screen laptop, though I was wondering: can I play something like XCOM, while still using touch to play the game?

Answer:Can a touch screen laptop play non-touch screen games...with touch?

I play World of Warcraft which was definitely not designed for touch screen and can interact with the interface just fine on my yoga.

1 more replies
Relevance 54.12%

I have an Ideapad P500 Touch  It came with windows 8 and I upgraded to 8.1 a couple months ago..( there were issues with that but I thought I fixed them at the time) Set up:At work, I attach a 22 inch screen and use that and the laptop screen at the same time. I also use an optical mouse connected to USB.Now, when I turn on my machine, I usually put the web on my 22 inch screen. While putting email and other Office programs on the laptop screen.Problems as follows: 1. Cursor wants to jump:When I try to type or scroll on the big screen my cursor jumps.The pointer is still on the big screen but the cursor action is suddenly on the laptop screen. When this happens there is a lot of flashing of the laptop screen and the bubbles pop up.. (I don't know what the bubbles are; I 'm assuming it the computer telling me it's thinking) This is very troublesome when trying to type. Sometimes it just instantly jumps on the first letter I type sometimes I can get a word typed in. ( Good Times..) Strangely I have not had one problem typing this out!!!? 2. Touch screen is very intermittent:Sometimes it works... Sometimes not..Sometimes it will all calm down and everything is fine with the touchscreen... Other times it gets very intermittent and just freaks out. Other info:Seems to be always glitchy in the first 10 minutes of startup(Touchscreen) Touch screen can work fine for a while at times.Then all of the sudden .... Arggg!!!I have disabled the touchpad (Elan) to se... Read more

Answer:P500 Touch -Cursor Jumping Screen flashing and touch screen intermittently responsive.

Our Lenovo Ideapad WIN 8 Screen Jumpy Too.  Bought in DEC, 2013. Suddenly, many times when I go into Microsoft Word the text jumps around like a Mexican jumping bean.  Again.  Not all the time.  But enough.  When it happens it jumps around even after I exit Word and get back in.  Impossible to enter text in files!!!!  This Lenovo cost $800 at Best Buy and is a piece of junk!!!  Worst PC ever owned.

2 more replies
Relevance 53.71%

i have lenovo z400 (non touch) core i5 3rd gen, 6gb, 1Tb. nvidia gt635m 2gb + intel hd4000 2gbcan i upgrade my sceen ? from non touch to touch ? we can change screen hardware ? i want touch my screen. have any solution ?and another one issue is = brightness problem win8.1 x64 . it can just very low level and very high level. i can't set it normally like medium brightness. have any solution ? 

More replies
Relevance 52.89%

So I have a small 10" touch screen as a secondary screen and it is recognized and installed when I plug it in the computer.My problem is that the actual touching is severly misplaced and I can notuse the calibration tool (Tablet PC Settings in control panel) to correct this problem.It is as if the vertical and horisontal inputs of the screen has been swapped. If I touch the right side on the screen and drag my finger to the left I can see the cursor go from the top to the bottom and if I touch the top and drag down the cursor goes from the left side of the screen to the right side of the screen.Installing the drivers from the manufacturer of the touch controller, http://www.eeti.com, did not help at all. It just says there are no touch controllers connected to my computer.Is there a way I can correct this problem?

More replies
Relevance 51.66%

I have a cracked screen on Yoga 2 13  and i am thinking to replace it. Since warranty is not working I contacted the service centre and they offered the replacment for the price of new laptop. So I said thanks either I will use as it is or find cheaper.  So please help me find the cheaper one which the most importantly fits to my one. I bought it in China (but not there anymore) and as I see the whole screen no. is 73048979. Also it issaid on paper  "13,3 FHD LED TS". I find part no. like B133HAT02.0   or LP133WF2 SP A1. But not the previous one. Can you help with finding the right one. It is frustrating a bit since I am not tech man. I am thinking sending back from here: http://www.365laptoprepair.com/Product/Lenovo-Yoga-2-13-Screen-Only or from ebay where I can find cheaper Chinese one. Is the screen from the link fitting my model? anyone knows?

More replies
Relevance 51.66%

I want to repair the touch screen digitizer but there is no site who sell the same spare.suggest me plz

More replies
Relevance 51.66%

I have a hp pavilion touchsmart 15-n029so. Unfortunately my touch screen is defect, so 5-6 points on the screen is constant active. Until recently I managed to disable the driver for only the touch driver (not the screen) through device manager, but then a lately update for windows 10 activated the driver again. So now the 5-6 points is constant active, and I cannot login because the screen will not focus on the login field.  This means I cannot login to windows 10. I have also tried to start safe mode (turning off computer repeatly, so it starts up in safe mode), but here the touch screen driver is also active.  How can I disable the touch screen driver without login into windows 10?  

More replies
Relevance 51.66%

Can we replace the capacitive touch controller or is it fixed?

Answer:Can one capacitive touch screen be replaced by a resistive touch screen?

Can you please provide more details?
What device do you mean?

2 more replies
Relevance 51.66%

Hi all, First of all, I know there were already 2 topics regarding this issue, but I have to create this topic because those 2 topics were marked 'Solved' and the solution there were not helping in my case at all. Symtoms:- In the beginning, it worked well even after upgraded to Windows 8.1, after some point, touch screen did not work anymore- There was a time that the touch did not work, I had to open the laptop 360 degrees, then put it back to normal so touch can work, but now it didn't fix the situation anymore- In 'Control Panel\System and Security\System', it shows that "No Pen or Touch Input is available for this Display"- In Device Manager, there is only 1 USB Input Device in Human Interface Devices (Hardware ID is USB\VID_2047&PID_0855)- There is no unidentified or conflicted devices What I have tried:- Install all Lenovo's drivers- Install old Intel Graphic driver- Reinstall windows 8.1- Reinstall windows 8- Disabled and enable all HID and USB devices- I lost the backup partition somehow so I cannot use OneKey Recovery Could anybody help me with this? I really appreciate all your help! I believe that there are many people had the same problem like me and have nowhere to turn to. Hope this can help them as well if it is solved!

Answer:Yoga 13 - Windows did not recognize touch screen/No touch screen

I'm having the same issue with my Yoga 13.  It occured after upgrading to Windows 10.  The touchscreen worked fine for a few weeks and then one day I realized that it no longer worked.  I have run through a factory reset back to Windows 8 and then back through all the steps you've listed above and still with no success.  If this was ever solved I would really appreciate any input

2 more replies
Relevance 51.66%

I have a C560 Ideacentre non-touch screen all-in-one desktop. The screen is busted on it, and I am curious if I can install a touch screen in it instead of the non-touch screen it currently has in it. I know they make the C560's with touch screens also, so I would think it is possible, but I'm not sure. Also, I can't find a part number for the touch screen to order it.Any advice on this would be great. My machine type is listed as 10150

Answer:Replacing non-touch screen on C560 ideacentre with a touch screen? Is it possible?

Not sure if this helps, but my serial number is: ***********
 
Mod's Edit: Serial Number removed for Owner's protection.

1 more replies
Relevance 51.66%

Hello! I'm wondering why my laptop does not have touchscreen when that's what I ordered? Thank you! Model: HP Pavillion 15t AU020wmWindows 10 HomeVersion 1607Build 14393.187Product ID 00325-80721-64798-AAOEMProcessor: Intel Core i5-6200 CPU @ 2.3GHz to 2.40GHzRam: 8GBSystem Type - 64-bit operating system, x64 based processorPen and touch: No pen or touch input is available for this display I'm really bummed about this when I orderd the one with a touch display. Is this an error on your end for shipping me the wrong model?

More replies
Relevance 51.25%

Hello all.  I have this model of laptop : HP Spectre 13-3000ea Ultrabook (ENERGY STAR) . I have some questions . on the screen there is a small crack (digitizer) . is it possible to replace only the digitizer? or must be replaced completely screen ? I bought on ebay.com  digitizer for my leptop  but no one is taken to replace the digitizer all say that it is necessary to completely replace the screen this is true ? or may be replaced only digitizer?

More replies
Relevance 51.25%

I have an HP TC4400 Tablet PC with 1024x768 resolution and i want 1280x800.

1) Would it be possible for a 12.1" wxga (1280x800) screen to work correctly in it? Does HP use a generic monitor plug-in for all their laptops that would allow the screen to plug in?

2) If the resolution was higher would that require a new digitizer?

I know these are tough questions to answer unless someone on here as done this in the past but any input would be appreciated.
 

More replies
Relevance 51.25%

Hi guys, So I took my laptop out of my bag about a week ago and found this:http://imgur.com/HIRHJ(I took the photo today, I've been too busy to deal with the issue for the past week but I've played around with it now.) As you can see on the screen, there is a large crack across the top right (which I have no clue where it came from, considering I had nothing in my bag but the laptop and my bag was never impacted in any way). Most importantly, however, no image is displayed, which renders my laptop unusable as a laptop (and I desperately need it for uni, fortunately this past week was a break but now I am without a laptop to take notes in...) Plugging in the laptop to an external monitor works fine as expected, however, so does the digitizer pen. i.e. if I wave my pen above the broken screen, it appears to work perfectly on the duplicated external monitor, clicking and all. So, my guess is that all I need to do is replace the screen, right? According to the manual, http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/0a60175_04.pdf (where mine is 4294-CTO), the LCD panel I want is 04W1545. I've found one for $175 which is great, but when I asked if the place could also replace the screen for me, they said it would no longer be a tablet. They said they "think I might need to get the full screen + digitizer for $650 + installation" which is utterly ridiculous, considering that's nearly the price I paid for the laptop. What I wa... Read more

Answer:Screen replacement - digitizer support

replacing the Tablet LCD is a very expensive exercise, since there is also a digitizer layer involved. Try calling Lenovo warranty service, and ask about aftermarket parts sale, and specifically request the parts . But it won't be cheap, around the price that you have been quoted for the full repair. If you are worried about cost, then you should probably sell your current laptop for parts or as it is. And then get another X220t.
 
Aftermarket parts for the X220t screen assembly isn't widely available, so this drives up the price of available parts. From the picture, you got the X220i Tablet, which is not sold in Australia.

9 more replies
Relevance 51.25%

Hello,  My Yoga 2 Pro's screen and digitzer is broken ( I think ). The screen has cracks starting from the camera down to the bottom of the screen. I'm going to college soon and I love this computer and I need one for classes. The display still works but I want the tablet feature to work again. If anyone can help me find a way to fix it that wont make my wallet cry that would really be appreciated. Thnaks 

More replies
Relevance 51.25%

Screen cracked on Hp envy x360 serial number [personal information removed]. The screen is cracked and every so often the screen shakes from side to side or zooms in and out on its own.
 
I need a link to either the screen or screen and digitizer

More replies
Relevance 50.84%

Did the earlier models of the thinkpad yogas sold on lenovo.com all come with the wacom digitizers? I've read that all models of the thinkpad yoga sold on lenovo.com came with the wacom digitizer. I ordered a thinkpad yoga off lenovo.com with the 1366x768 screen on Feb 23 and I haven't received it yet. I could've swore that when I chose the screen resolution their was none that specified it came with the pen and wacom digitizer, but now I'm second guessing myself. Now I see that it only comes with the 1920x1080 FHD screen and it that option specifies it has the pen and wacom digitizer. So I'm just wondering if the earlier models from lenovo.com came with the wacom digitizer and they just recently switched it to only available on the 1920x1080. The part # for my computer is listed as 20CDCT01WW.

More replies
Relevance 50.84%

Hi, I have just finished installing my Nokia Lumia 520 Digitizer but I have few problems with it. The digitizer works but if I switch my phone of and start it up again it stops working and I have to factory reset it by using the buttons to make it work again.
Could someone please explain me why my digitizer stop working if I switch of my phone. I've been with the charger in my pocket all time now to make sure that it doesn't run out of battery.

More replies
Relevance 50.84%

Hello Summary:I bought a 20CD0001IV about two months ago (Demopool). I need it for work and drawing, but so far I have numerous issues. And right now I'm kinda lost: What should I do? Send a support question to lenovo/IBM EC? Contact my retailer? Are these common problems? I'm also not sure about my warranty. The Lenovo Solution Center says, I still have warranty. The different parts of the website say different things. I'll assume worst case: My warranty is likely expired. I tried:Fresh Installation Windows 8.1, newest drivers, newest Wacom drivers. Tried different settings. Calibration, Pressure Curves, all the stuff. Have 3 different Pens. Searched google, searches this forum... Problems:Massive Ghosting, I know, there is a solution on the forum. It says to replace the old screen with a newer model, but is this possible if the warranty is expired?Calibration is a mess! The digitizer point wobbles under the pen, this is most obvious near the screen border, where straight lines turn into curves. But it's also an issue in the middle of the screen. In some places the cursor is 2mm top left of the actual pen tip, in other places it's bottom right UNDER the pen. I tried all kinds of calibration already... I know about a "dead spot" issue, but this was fixed with a firmware update and my issue is all over the place, not just one spot.The screen is not very solid. Even medium pressure with the pen leads to dark and light display glitches near the tip. Pen press... Read more

Answer:TP Yoga numerous issues with screen and digitizer

I did some more testing with the maximum pressure issue. And it might be related to the pressure level of pens. As far as I know the Yoga supports 1024 levels. I have a new Wacom PL-900 and it has only 512, and the pressure problem is strongest. It is the same with the original Yoga pen, I'd say - even though this should have 1024 levels? But with an old Samsung Series 7 pen I need to press harder to reach 100% pressure - although it is still not really "hard". I'm not entirely sure how many pressure levels the Samsung Slate pen has, thought it was 510, but have seen some reviews mentioning 1024...Anyway, I posted this issue in the wacom forums.

2 more replies
Relevance 50.84%

I dropped my lumia 830 and it cracked the screen pretty badly. I ordered an have the replacement screen with the digitizer, however I can find videos galore for every phone but the 830. Any help is welcomed.

Answer:Has anyone replaced a screen and digitizer for the nokia lumia 830?

Hello, this is mostly because the 830 is still relatively new.. After a quick search I found this vid (Does not show how to replace anything, but does show you how to disassemble the phone):

10 more replies
Relevance 50.84%

I would like to eliminate my HP Envy-23 d044 Touchsmart capability, I know how to disable it in Device Manager, but i would prefer something more permanent. My first question: is it possible to disconnect one of the TouchScreens, Digitizer Board ribbion cables, and still have LCD video function? My second question is: if so, where is the Board located in the PC housing?   The HP part number is as follows: (P/N:687534-001) Thanks for everyone help! Phillip

More replies
Relevance 50.84%

I opened my Y2Pro only to find my screen cracked on the left hand side. Other than no touch screen it works fine. From what I understand it's only the digitizer that is cracked. I found a replacement Lenovo digitizer but can't find instructions on how to fix it. Laptop repair 365 has a video on replacing the whole screen. I'm now seeing posts saying the digitizer can't be separated from the lcd...Any help would be appreciated.

More replies
Relevance 50.02%

I've searched the Lenovo site and can not find the replacement part number for my laptop (Flex 3-1580, Model 0007US, Machine Type 80R4, SN R90HAFJB) digitizer screen.  Can anyone provide me with a link to the part needed and a video/pdf on how to do the replacement? Thanks 

Answer:Lenovo Flex 3-1580 digitizer screen replacement

Hi there, the part number for the digitizer assembly is 5D10K42174, here's one on eBay; http://www.ebay.com/itm/5D10K42174-Lenovo-Flex-15-6-FHD-LED-LCD-Touch-Screen-Glass-Digitizer-Assembl...
 
Refer to the HMM (pg 59) for instructions on replacing the screen: https://download.lenovo.com/consumer/mobiles_pub/lenovo_flex_3_1480_flex_3_1580_hmm_201509.pdf
 
Plus, here's service training videos: http://lenovolearning.bhivesoft.com/bhive/t/1004/course_launch_frame.jsp?id=8173
 
 

1 more replies
Relevance 50.02%

Hi

When I turn the display off, the touchscreen and digitizer are still enabled, so, if I touch the screen, the display comes back on. Any way to solve this?

Also, not sure if related, if I turn the screen off and leave it overnight, the battery drops by 25-30% in about 8 hours. Same thing happens when I leave the screen turned off for a short period of time, the battery just doesn't last. Not sure if its because the touchscreen and digitizer are still on.

P.S. Running on upgraded Windows 10 64bit.

More replies
Relevance 50.02%

I have a problem witmy x220 (model 4294) whereby the digitizer will start dragging icons on the desktop before it's even touched the screen. It's really annoying and makes the digitizer unusuable. The multitouch with fingers works fine. Any ideas? Thanks

Answer:Digitizer starts double clicking before touching the screen

hey marko_dreer,try uninstalling the pen driver and then install the following twohttp://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013724Also head over to >> http://support.lenovo.com and update your unit as well.





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

9 more replies
Relevance 50.02%

Hello all, apologies if this is a duplicate issue, but my searches did not turn anything up. I just received my new TPY a couple of days ago and have been happily installing software. Today was the first time I really tried using my digitizer pen, as I finally had time to open Photoshop and Illustrator. In doing so, however, I discovered pen calibration is completely messed up for the top edge of the screen. I tested it outside of the Adobe programs and the same problems occur there. I have already gone in and tried recalibrating my pen more than once using the calibration tools in the Control Panel. Is this a known issue that I just need a driver update for or is this a hardware issue? Any help is appreciated. Thanks,Erika

More replies
Relevance 50.02%

I need to replace my screen and digitzer.  My computer guy who has done screen repairs for me in the past says he can find the LCD for my U530, but he cannot located a glass digitzer for it.  Does anyone have any ideas where I can purchase one?  Will Lenova sell me one?   I can't find anywhere to order this part from their website.  Any help pointing me in the right direction would be greatly appreciated.  Mike

More replies
Relevance 49.61%

I just encountered this problem, it seems like an issue with the touch screen driver. When a monitor is connected via VGA and that monitor is made the primary display, whenever I touch the laptop screen, the click indication appears on the wrong monitor. Is there a driver update that fixes this? Who should be notified? What company made/supports the touch screen?

Answer:W510 touch registers on wrong monitor when touch screen not primary display

hey MRX,regarding this, really hard to say what could be the cause.curious to know, the external monitor which you are using, did it by any chance some with its own drivers ? also have you tried reversing and placing the external monitor as the primary ? does it make any difference?





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

4 more replies
Relevance 49.61%

Hi I bought a Acer ICONIA 6120 Dual Touch Screen Laptop in 2011 when I was in US. I returned to India in 2011. In 2014 the bottom touch screen virtual key board started mal-functioning. The keys will automatically click making it unable to use. I gave it to a local technician he disabled the bottom touch screen. He also said the Hard Drive is corrupted needs replacement. He replaced with a new 500GB hard drive. While replacing it he changed the Windows 7 home premium to Windows 7 ultimate. From then on we were using it with a wireless key board. Now I am trying to repair the laptop. 1) Where can get 14" bottom touch screen so that I can buy and install 2) Where can get the recovery disks along with windows 7 home premium Thanks in advance for your help

Answer:Acer ICONIA 6120 Dual Touch Screen - Bottom Touch ...

I suggest that you first try to recover the laptop to factory-fresh Win7 home premium by purchasing the Iconia 6120 recovery media. This may help resolve the bottom screen issue. If you aren't in the US, please click on support at the top of this page. Choose the country. Then click "get support". And then choose contact acer for tablets. You should then get phone numbers or email addresses for Acer representatives who might help arrange for you to get this media.  Jack E/NJ

1 more replies
Relevance 49.61%

Received my ThinkPad Yoga today - i7 ? 8 Gb - 256 Gb SSD - Win 8.1 pro ? One major problem ? the touch screen stops responding to finger intermittently. It always responds to the stylus. Updated all the Lenovo drivers and did Windows updates. When it stops responding, the only way to get it to work is by doing a shut down ( restart does not work ). Read the forums and disabled and enabled HID-compliant vendor-defined device. That did not make any difference. Is this a common issue and is there a software fix for it or is it just a faulty screen?

Answer:Thinkpad Yoga 20CDCTR1WW - Touch Screen not responding to touch - intermittent

Hi Waferthin,
 
Welcome to Lenovo Community!
 
I?m sorry to hear that you are facing the issue with Touch screen on ThinkPad Yoga.
 
To resolve the issue please follow the below troubleshooting steps.
 

Remove the Wacom touch gesture driver in the device manager and make sure to check "uninstall driver" when you do so otherwise the touch will stop working again a minute later.
And after that restart the system and the touch screen driver will automatically install.
In services.msc restart human interface device service to run automatically.

Hope this helps! 
 
Best regards,
Hemanth Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

5 more replies
Relevance 49.61%

I have ThinkPad X230 Tablet. It used to have non-functioning touch screen. I did something, and now the screen responds to pen input, but it doesn't work properly for finger touch. When I touch with finger, only thing it does is minimize or maximize window. When I change position of taskbar (with start menu and icons), it doesn't maximize/minimize.  I think this means that when I touch with finger, cursor clicks at bottom right corner of display, where there is button for maximize/minimize window

More replies
Relevance 49.61%

My Ideapad P400 Touch with Windows 8 is no longer responding to right side swipe (charms bar gesture).  All other touch screen functions and gestures still work normally, including the left side swipe to switch apps.  The screen still displays the 'touch feedback' dots when I attempt the gesture but no charms bar appears! I've tried recalibrating as well as removing calibration of touch screen, and tried various other troubleshooting procedures I found on this site, like uninstalling recent updates, etc... Finally I tried running Windows 8 PC refresh, which worked as it's supposed to so I got to reinstall all my software but didn't fix the missing charms bar! Has anyone had a similar problem with the touch screen right-side swipe and been able to fix it?  Any help would be greatly appreciated!   Thanks!cait 

Answer:P400 Touch - swipe gestures (on touch screen) stopped working

ccd8 wrote:My Ideapad P400 Touch with Windows 8 is no longer responding to right side swipe (charms bar gesture).  All other touch screen functions and gestures still work normally, including the left side swipe to switch apps.  The screen still displays the 'touch feedback' dots when I attempt the gesture but no charms bar appears! I've tried recalibrating as well as removing calibration of touch screen, and tried various other troubleshooting procedures I found on this site, like uninstalling recent updates, etc... Finally I tried running Windows 8 PC refresh, which worked as it's supposed to so I got to reinstall all my software but didn't fix the missing charms bar! Has anyone had a similar problem with the touch screen right-side swipe and been able to fix it?  Any help would be greatly appreciated!   Thanks!cait If you use an external mouse and move the pointer to the right will the charms bar appear?

9 more replies
Relevance 49.61%

Hi, I have the Lenovo X1 Carbon Touch, new as of april 2014, and since last week, the touch screen has stopped responding to touch inputs. Before this it has been working and behaving perfectly. I have tried to turn the laptop entirely off and on, reboots... No effect. The screen simply acts like it never was touch. The HID driver is present and claims to be working. I tried to reinstall it and it does so with no errors or warnings. I also tried to reinstall the monitor and graphics card drivers. The Tablet control panel icon offers a calibrate option but Reset is disabled. The calibrate doesn't help because it doesn't respond to touch. System says it has touch with 10 finger inputs. Windows 8.1 Update 1, Enterprise SKU Any advice is welcome. UPDATE! Touch works when I lay the screen out flat. But if I return it to any angle, it stops working. Is this related to LayFlat mode or is there a connection fault in the display for touch input so only when I lay it flat it has contact? Software or hardware?

More replies
Relevance 49.61%

Drivers all show working properly. Not intermittent. Tried settings and no help. No response when touching screen at all. Can't calibrate. Bios has no update available. Nothing in manual under troubleshooting. Any quick fix suggestions have likely been tried, but open to all ideas. If all else fails, and assuming the digitizer is bad, what does repair entail and any rough estimate?Is there any recall? I see this issue on the forum a lot with not many folks getting it resolved.TIA!!

Answer:U310 IdeaPad Touch :The Touch Screen Stopped Working. No Previous Posts Have Helped.

hi c2nah777,
 
Welcome to Lenovo Community Forums!
 
Have you tried booting the system in Recovery Mode (One Key Recovery), You're not going to Recover the system since your only going to check the touchscreen in that mode "Outside Windows"
 
See if the touhcscreen works there,
If Yes, I would suggest doing a factory Reset First Before jumping into a hardware Repair.
If No, Then I think you're correct with the digitizer.
 
Regards
Solid Cruver





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

3 more replies
Relevance 49.61%

My duaghter cracked the digitizer glass on her laptop, but it still works fine after disabling the touchscreen. I know I can buy another digitizer glass and replace it, but if the lcd itself is still functional can you just remove the cracked glass and use it as a non-touchscreen laptop?

More replies
Relevance 49.61%

I dropped my laptop the other day. In the process of trying to get the screen back togerther I think I broke the digitizer. Are there any tips on getting the screen to snap back together until I recaive a replacement digitizer? The right side of my screen does not seem to want to snap back together like previous laptops I have owned













Solved!

Go to Solution.

Answer:Dropped Laptop, Flex-2 15, screen won't go back together/broken digitizer

Welcome to the Lenovo Community !
 
I'm not an owner of your model, but it would appear to me if the screen is not snapping back into place there might be something misaligned or possibly a broken piece of plastic preventing it.  To correct the problem you might have to do a little disassembly to find the cause.  
 
For your reference I have listed below links to your model's Hardware Maintenance Manual and a Lenovo Training video series.  You might find that information useful in trying to correct the problem
 
 
https://download.lenovo.com/consumer/mobiles_pub/lenovo_flex_2_14_flex_2_14d_flex_2_15_flex_2_15d_hm...
 
 
https://www.lenovoservicetraining.com/showcase?sid=482&key=TGVuZw==

1 more replies
Relevance 49.61%

My wife uses the Lenovo U430 laptop. When she's using the touch screen, and she touches on an area, it will occasionally zoom in on that area instead of "clicking" what she's touching. This is annoying her (and me) to no end. This does not happen when she uses the touchpad. How can we stop this from happening?

More replies
Relevance 49.61%

My Lenovo U410 Touch recently got damaged - the hinge broke causing the touch screen to **bleep**.I was told that a repair was not feasible as none of the repair shops near me were able to source the parts needed.I therefore bought a new laptop. However, there is a lot of data on the old laptop that I want to access, including sorting out the licensing of MS Office (by uninstalling from the old one).I cannot do anything about it as the old machine is completely unusable as due to the touch screen being cracked, it seems to think it is constantly being touched in multiple places on the screen. This means that I cannot access the laptop to copy the data or uninstall Office. Anyone know any way around this that doesn't involve taking it to a repair shop to "recover" my data. Cheers

More replies
Relevance 49.61%

I've lost the use of my keyboard, but not the touch pad. Restarting and converting to table mode and back doesn't correct the issue. Thoughts? I'm not sur where to go from here. Could the keyboard be physically dead?

Answer:Yoga 2 Keyboard not working, but touch pad and touch screen fine

You should test the keyboard in the BIOS menu and see whether it works. 1) Press on the recovery button (next to the power button, you may need a small screwdriver). https://www.flickr.com/photos/lead_org/11617761143/in/set-721576390073780542) Then there is an option menu for entering recovery, bios, etc. https://www.flickr.com/photos/lead_org/14512183979/in/set-72157639007378054Use your keyboard and see whether it works in that option menu. If it doesn't work then it is a faulty keyboard.

1 more replies
Relevance 49.61%

My Ideapad S415 touch screen has suddenly stopped working.  I've had a tech connect to my PC and try a BIOS reload of default settings, plus unistalling all "HID" devices in Device Manager with no resolution.  I've also tried a system restore with no luck. The system properties does see the touch capability. Suggestions? Thanks.










Solved!
Go to Solution.

Answer:Ideapad S415 Touch - touch screen stopped working

hi Hersh,
 
Welcome to Lenovo Community Forums!
 
First do a Power Drain 
     (If the battery is removable)
            Remove AC and Battery and hold the power button down for 15 sec.
               Turn the computer back on and see if the Touch capability is now detected under System Properties,
                  If not
         I suggest you contact Lenovo Technical Team about the Issue as this may be a device detection issue.
       Lenovo Technical Team
 
Regards
Solid Cruver



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Relevance 49.61%

I have the IdeaPad S510p touch, which seems to have a similar problem as other Lenovo models where the touch screen seems to stop working intermittently.  It seems to stop working after a while or after it has been sleeping.  It starts working again randomly.  I tried downloading a driver for a different model, but it didn't load or allow me to open it.  I just got this computer a few days ago.  I'm not sure if it is better just to take it back to the store, but I am concerned that this problem will exist even if I exchange it for a new one...

Answer:Touch Screen intermittently working (IdeaPad S510p touch)

Hello... I have an ideapad S510p, about 4 months old. Today, the touch screen stopped working. In the middle of using an app and using the touch screen. I searched all through settings and can't find anywhere to adjust its settings or anything. And in fact I saw that this computer "Has no touch/pen screen", which it does. Or it did until about an hour ago. I am relatively clueless but i'm learning. And would like some instruction/options. ThanksJohnpal716

2 more replies
Relevance 49.61%

Hi, My G400s series touch screen laptop touch not working. It stops working just one month back. It was purchased around 16 months back. I have done all the trick which suggested on the forum by many users but all in vain. I have always updated with latest updates by Microsoft including Window 8.1/latest driver by Lenovo but I think this is not the issue with Windows upgrade because this was done months back and touch was working perfectly. If this is hardware problem the Lenovo should accept the fault and change the failure part free of cost or come up with some solution because many Lenovo users suffering with this problem. Kindly some one can suggest me where I should approach to get this rectify?

Answer:Lenovo 400s touch screen laptop touch not working

Hi Surinder,
 
Welcome to Lenovo Community!
 
As per the query we understood that you are facing issue with touch screen not working in your G400s laptop.
 
Please confirm is the display appears on the screen; also check if the touch screen is damaged.
 
Also try to reinstall the display driver and touchpad driver to the latest version and check for the issue.
 
Click here for the display driver for windows 8.1
 
Click here for the touchpad driver for windows 8.1.
 
Hope this helps. Do post back if issue persists!
 
Best regards,       
 
Ashwin.S





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

3 more replies
Relevance 49.61%

Hey, The U330 touch arrived today.The touch screen only works for a couple minutes and stops reacting after that. It works again after restart, but only for minutes again. It did this behavior from the beginning, without installing anything.(I only found that others have that problem too, but no solutions) Does someone have any suggestions to solve this problem?  

Answer:U330 Touch : Touch screen only works for a couple minutes

Hi EchsE,
 
Welcome to Lenovo Community!
 
I?m sorry to hear that the Touch screen of your U330 Touch Laptop. Please let me know if you have re-installed the display driver and the issue persists in your computer.
 
Hope to hear back soon
 
Best Regards
Shiva Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

2 more replies
Relevance 49.61%

For the past several weeks I've experienced a very annoying problem with my ThinkPad.  Whenever the laptop goes to sleep and resumes the touch screen goes... crazy. It starts registering multiple inputs across the touchscreen and the only thing that seems to resolve the issue is a restart. Sometimes, upon restart, the touch screen works normally, other times it does not work at all.  Has anyone else experienced this issue? I've seen this issue described for other Lenovo models with fixes, but none for my model.  Under the hardware ID in device manager, this monitor is a LEN 40A4.  I'm running Windows 10.  This is my third Thinkpad X1 Carbon, not because I love to upgrade, but because these machines seem to only last one year before something major breaks. 

More replies
Relevance 49.61%

My laptop automatically updated in Sept./Oct. It took about an hour and had multiple restarts, so I am assuming it was a Windows 10 update. I am not 100% sure though. Afterwards, the touch screen doesn't work. My laptop automatically updated in Sept./Oct. It took about an hour and had multiple restarts, so I am assuming it was a Windows 10 update. I am not 100% sure though. Afterwards, the touch screen doesn't work. I can tap the screen and it will select stuff but I cannot scroll or anything else. Anyone able to help with this? It is drving me bonkers.

More replies
Relevance 49.61%

Hello, this is my situationI have bought my Lenovo Z400 Touch 59366600 in June last year, and it came with a non-functional webcam. In September last year, the touchscreen started exhibiting the spurious touch input fault on the left edge, rendering the computer unusable until the touchscreen is disabled in Windows. At some point after this, I have disassembled the computer.I have since moved to Austria, and I wish to solve my laptop's problems and am willing to pay a fee for the service. How can I do so? In addition, I have already bought a new SSD and more RAM to upgrade my computer, and am planning on installing Windows onto the SSD, however the Windows installer will detect the touchscreen and it will be impossible to click any buttons on screen.  

More replies
Relevance 49.2%

My touch screen stopped working about 2 months ago after an update and it came back then stopped again. I chechd for testing it in UFEI Bios and it is not listed. How can I get the correct bios and there are no drivers to update, the hid-touch screen driver says it fine.  Its been working fine for 2 years. Could the bios been changed?I downloaded the UFei bios that was on your site but it still didn't show up there. I tried a setup in windows but touch screen isn't working to calibrate.

More replies
Relevance 49.2%

Yesterday I was on my laptop and before I shut it down it went into what looked like a different mode. I booted it up this morning and it is still in this mode. It looks like touch screen mode but I do not have a touch screen.  The icons on the task bar are spaced out and there is a back button on the task bar too which is not normally there. When i right click against the task bar, one of the buttons says "Show touch keyboard button".  All of my files are spead out as if to have room for touching if I had a touch screen but I do not. I am finding this very annoying because I cannot get onto my desktop properly and is not in the right mode. Please help! 

More replies
Relevance 49.2%

I have a X201 Tablet had always worked well.Yesterday suddenly the screen became completely black.I connected to the external LCD monitor and the computer works perfectly.But the internal monitor not. At least as a monitor.I can not see anything in the screen not even in backlight.But I can use the digitizer on screen... Namely if I touch the screen with the pen it makes me mouse. It seems strange because I was convinced it was a matter of cables.What can it be?Should be the illuminator? I think not, because in this case should be seen vaguely. Is that correct?Then I thought, or the display itself or cables that connect to the main board?I opened but everything seems to be ok. What is more likely is.I would like to understand it before you buy spare parts useless.How can I test which of the components is?I hope someone can help me,Thanks in advance

More replies
Relevance 49.2%

As the title states, could I connect a laptop that has no touchscreen capabilities to a touchscreen monitor for the functions? The OS I am discussing by the way is Windows 8.1.
Thanks! :)

Answer:Non-Touch Laptop Hooked Up To a Touch Screen Monitor?

Originally Posted by Deferno54 As the title states, could I connect a laptop that has no touchscreen capabilities to a touchscreen monitor for the functions? The OS I am discussing by the way is Windows 8.1.
Thanks! :) Yes. It should be fine

4 more replies
Relevance 49.2%

Hello,for our company we have multiple versions of the Thinkpad T470.Some are touch, some are non-touch. Now for a repair of a non-touch T470, i want to replace this with a LCD WITH touch.Until now there is no working LCD with touch. On the Part-website of Lenovo i found the following: Non-touch LCD-cable : 00UR481  Touch LCD-cable : 00UR484 The cables look the same...but are they same?is every T470 motherboard capable for Touch LCD ? Or is also another motherboard needed?

More replies
Relevance 49.2%

Hello,I am desperate for help. My laptop will turn on. And I can type in my password. But then when the computer loads it takes a very long time and when it gets to the desktop the keyboard, the mouse, the touchpad, and the touch screen won't work. I can see everything on my desktop. But I cannot open anything or do anything at all. How can I fix this?Thank you!!!

More replies
Relevance 49.2%

Not only are "pen and touch" no longer in my control panel, HID-compliant touch screen is not in my device manager.  Needless to say, my touch screen is non-responsive.
I have a Compaq Elite 8300.
I had problems before but everything was working 24 hours ago and I didn't make any changes since then. 

More replies
Relevance 49.2%

I want to buy this mouse to better work with my laptop.
Can somebody give me some feedback on how this glas pane works instead of a scrollwheel? Handling, etc.

Answer:Logitech Touch Mouse 400 for a Laptop with no touch screen

Sorry I can't answer your question, but this post piqued my interest. I use the Logitech 620 touch mouse on a Windows 7 box at work. I find a little touchy and has to tweaked. But I haven't tried the 620 on Windows 8. Because I'm always looking for the perfect mouse, I think I might just pick up the 400 tonight and let you know.

1 more replies
Relevance 49.2%

Hi there, sorry to be a bother.Like the title says, my touch screen stopped working. I went on to my computer one afternoon and found my mouse stuck in the top left corner, fidgeting. This was what I was expiriencing. (My touch-screen still worked fine at the time, but I still couldn't do anything or control the mouse, but I could tell that it was still working and it still responded.) After a bit of time and a few restarts later, it went back to normal, but my touch-screen then stopped working. I'm used to the touch-screen working incorrectly occasionally, and much like the mouse thing, a restart or two helps.It has now been three days and my touchs-creen still does not work. I've tried many of the solutions found in these forums, but to no avail. I am running Windows 10 and have had this computer for 2+ years.  Thanks.

More replies
Relevance 49.2%

The laptop has vertical lines of dead pixels running across the screen and I want to get the LCD replaced. Now the non touch screen model of this laptop has a Full HD variant (1920x1080) as opposed to the standard 1366x768 WXGA HD display while the touch models only come with the WXGA HD LCDs. Can I replace the LCD of my touch screen model with the FHD one? I have been able to detach the digitiser from the LCD itself and have the hinges and screws so I would assume it would be a simple case of changing one LCD with the other. The replacement touch screen models all come with the digitizer and hinges attached which is not something I require so it would be easier (and cheaper!) if I only got the LCD replaced. Lastly, if this is possible, do I need to purchase any additional cables? If so, which one?Thanks in advance.

Answer:Replacing Dell 15R 5537 Touch screen LCD with FHD non touch LCD

You're going to need at least the FHD wiring harness:
www.parts-people.com/index.php
the screen
www.parts-people.com/index.php
and the bezel
www.ebay.com/.../302211389965
You may or may not be able to re-use the back cover/hinge assembly - usually these are different between non-touch and touch versions.

1 more replies
Relevance 49.2%

Hello, My Thinkpad Yoga is connected to a large display through ThenkPad docking station.  Its lid is closed.   During my work, from time to time I see random touch clicks on my screen, and random opening of menus.  It is clear that the touch screen is active although the lid is closed.  When I open the lid, and still connected just to the 2nd display (large screen) display the phenomena stops.  Worth noting is that although only the 2nd display shows an image, the laptop touch screen is still sensetive to touch.  This is I guess why the random touches show up on the screen -- it feels the keyboard not fingers. I expect the touch screen to be disabled while the lid is closed or when projecting only to the 2nd screen.  The solution of opening the lid while connected to the docking station is not acceptable.  Lenovo's local support suggestion to disable touch for the Yoga is also not acceptable -- people purchase Yoga to get Touch.   A solution please! Yaron

Answer:Yoga touch screen generates random touch while lid...

I am experiencing the very same thing.A driver/BIOS update would be very much appreciated, dear Lenovo.

9 more replies
Relevance 49.2%

hello,iam facing a severe problem  regarding th touch on HP envy notebook 13 .touch bubbles are being appeared without any touches made manually,i have facing this problem since a month.hope u guys help me out to solve this problem.

More replies
Relevance 49.2%

The touchscreen stopped working suddenly on my Envy TouchSmart Sleekbook 4-1115dx. At first i though it was like a normal failure and that will get fixed by turning the pc off or restarting so I did not pay attention to it until now that I had restart my pc multiple times. Currently running win10. I started to believe it was because of an update a few days ago since it was when the problem started but all drivers and everything is up to date. I have checked for the HID-compliant Touch Screen driver and had to  show hidden divices in order to find it. I cannot enable it and when i check in the properties the following message displays: "Currently, this hardware device is not connected to the computer. (Code 45)To fix this problem, reconnect this hardware device to the computer." I have no idea on how to connect or how it got disconnected. I come from a similar thread but did not solve my problem. I have been researching this for hours and have not found and answer. Help please! 

More replies
Relevance 49.2%

I bought new, but somehow do not want to workVideo is compared, apparently just enough to buy a new cable https://www.youtube.com/watch?v=cj5L-1l4qzI&feature=youtu.beI bought it herehttp://www.ebay.com/itm/Lenovo-Ideapad-S210-New-11-6-LED-LCD-laptop-screen-with-touch-glass-/1912932...
 
This is a new LCD
This is a broken LCD
 
Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

Answer:Lenovo S210 Touch broken LCD and Touch screen

Hi Magnutus, welcome to the forums.
 
Please check if you Lenovo S210 is on warranty under with this tool.
After that you can open a ticket with Lenovo for the screen to be fixed, if it is not under warranty it will have a cost.
 
If you are the guys that like to fix it yourself (and it is not under warranty) I can recommend you to check the support site for your model, read the Hardware Maintenance Manual (on the documents area) and check how the machine is organized on the inside. On the parts lookup page you can find the parts number so you can find a replacements for the component that is giving you issues.
 
I hope this links helps you.
Regards
 
 
 
 

1 more replies
Relevance 49.2%

Does anyone know the following about the 2015 X1 Carbon 2560 x 1440 screen? Does the touchscreen still have the same hazy film that prior generations had?  We have a couple of the older ones at the office and that hazy film makes it very fatiguing to read text.  Does the non-touch have the film?  Is the non-touch clearer and easier to read text on? Are the screens matte or gloss? I know lenovo doesn't recommend removing the film but it appears many people have removed it.  Is there any detriment to removing the film? Thanks in advance.

Answer:X1 Carbon 2015 (Gen 3) touch vs non-touch screen clarity

I have a 2015 X1 Carbon with the 2560x1440. I don't notice any hazy film over the screen (but I have heard that Lenovo coats it with something). It's a glossy screen but probably a bit less glossy than some others I've used.That said, the screen is fairly dim (I think max 270 nits) and I need to leave the brightness nearly all the way up which eats away at battery life. But at that setting, it's terrific for me.





____________________________________________________________2015 3rd Gen. X1 Carbon | i5-5300U+256GB SSD+QHD (2560x1440) | IPS Multi-touch2012 x220 (i7-2640M 2.8GHz) | 8GB RAM | IPS display | upgraded 256GB mSATA Samsung SSD + 160GB SSD

7 more replies
Relevance 49.2%

Hello everyone, my touch screen on my lenovo ideapad z400 touch is not working anymore.  The only weird thing I remember is some ghost touchpoint on my screen. I've been looking for the answer to this issue, but it seems that Lenovo does not address this problem.  If someone has found the solution to this problem and wants to share it with me, I will be forever grateful.  

Answer:IdeaPad z400 Touch - Touch screen not working

I facing the same situation right now. any solution please. left side of monitor is being "touched"?

1 more replies
Relevance 49.2%

Has anyone noticed that every once in a while, a Yoga screen becomes unresponsive to touch?  I use mine mostly in tablet mode, and sometimes out of the blue, I can no longer do anything with the screen.  I have to use the power button to put the laptop to sleep, and then press it again to wake--everything works again after that.  So I'm wondering why that happens.  Is it a touchscreen driver crashing?  Has anyone found whether there's some driver version that works better or else another solution?  P.S.: Im using all the latest drivers I could find, including the latest Intel display driver.  No other issues at all other than this one.

Answer:Yoga 2 Pro: touch screen stops responding to touch sometimes

I have not had this issue, but is it possible that it has something to do with transitioning in and out of tablet mode?   In my normal usage I have to fold the screen about halfway closed to set my T2P down which puts the device in tablet mode.  Occasionally, when I open it back up the keyboard and touchpad do not respond.  If I close it most of the way then reopen, it snaps back to laptop mode and all is OK.  Your issue may be completely unrelated, but I am offering it in case it jogs some other thoughts.

1 more replies
Relevance 49.2%

My Yoga 2 11.6 is registering a permanent touch in two locations:  http://imgur.com/pPqRUhEI've had to disable the touchscreen in device manager just to make the computer usable for normal use.  I just got this thing for Christmas, so it isn't old.   Is returning it to Lenovo for weeks my only option?  =(

Answer:Yoga 2 11.6 touch screen registering permanent touch

I am having a similar problem with mine. Touch spots will show up at random and display becomes unstable, bouncing around or resizing. Restarting will clear it up. It seems to have lessened but sometimes when I rotate the screen it will still happen. 

1 more replies
Relevance 49.2%

My toouch screen eventully goes haywire, forcing me to shut off my computer and turning it back on again....It does it again after about an hour of use....Haywire meaning things keep opening and closing poppoing up and disappearing....I think it is an issue with the touch screen and I would like to know how to fix it. 

More replies
Relevance 49.2%

The trackpad (from how it seems) causes Windows to switch to touch mode on the W541. What triggers touch mode?- Using the trackpad;- Unlocking the laptop. So why care if the W541 does not have any touch capabilities anyway?- Apps switch to touch mode which enlarges elements and makes work inefficient;- Websites switch to touch mode which makes certain web elements unusable;- The notifications button is moved off the screen for a while (see attachment);- The famous touch keyboard button shows up in the taskbar. What we have tried so far:- Updating all drivers provided by Lenovo;- Disabling tablet mode from Settings ? Tablet mode;- Disabling the Synaptics Pointing Device from Device Manager;- Disabling Human Interface Devices (even though nothing with ?touch? is listed here) from Device Manager;- Disabling all trackpad features from Synaptics. The way to work from the W541 is to use a mouse without ever touching the trackpad and to never lock the laptop which is ridiculous. Operating system: Windows 10 Enterprise (issue also confirmed on Windows 8)


























touch.png ?11 KB

More replies
Relevance 49.2%

Hey everybody, I just received my P40 last week as a replacement for another Lenovo device. So far, everything seems to work fine with one exception: When I turn the screen over to the "tablet position", the touch screen and the touch pen show erroneous behaviour.a) As soon as I make the first input with the touch pen, I cannot make any further input with my finger, so the touch input is simply turned off. The Windows setting to ignore touch input when the stylus is used is not active.b) When I try to tap buttons at certain areas of the screen, especially at the upper edge, the cursor of the stylus starts jumping around and shows up at the lower edge of the screen. That means that when I for example tap on the "X" symbol in the upper right corner to close a window, I actually click on some of the symbols in the system tray in the lower right corner. This problem stops occuring as soon as the angle between the two case parts (screen and keyboard) reaches/exceeds approx. 40. It does not matter if Windows is in "Tablet" or "Desktop" Mode. I already tried to manually install another Wacom driver mentioned at https://forums.lenovo.com/t5/ThinkPad-S-Series-ThinkPad-Yoga/Wacom-Tablet-Service-for-ISD-Driver-Win... and https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/P40-Yoga-issues/td-p/3293985. I had no luck trying driver versions 7.3.3.12, 7.3.4.8 and 7.3.4.13. I would really appreciate your help since this issue makes working in the tablet position... Read more

More replies
Relevance 49.2%

I have a Lenovo s400 and the Touch screen is not functioning.  The details highlighted in the blog also describe exactly what happened to my computer - I updated to Windows 8.1, it worked intermittantly for a week and would cease to work after the computer slept for a brief time, then there were ghost taps in the top corners that were inceasant, then it no longer functioned at all.  The online support staff attempted all of the software updates to no avail.  I am looking for any type of help to resolve this problem.
 
1/28/15 EDIT: This post was moved to the top of the discussion for escalation purposes. Amy_Lenovo













Solved!

Go to Solution.

Answer:Re: S400 Touch - Touch Screen stops working

Hello, I decided to post it as I cannot find a solution been trying to find a solution for 3days, but to no avail.. My laptop's touch screen function stopped working last saturday, i don't really know what the problem is,Here's what I tried to check/do based on the touch screen problems here in the forums HID Touch Screen -> Installed properlyHID Service -> Set to automatically start-upPhysically - Perfectly taken care of, no drops since bought.Tried to revert back to windows 8 -> did no goodUpgraded back to window 8.1 -> did no betterThere is no wacom touch gesture(w510 solution) to uninstallHardware problem? -> no idea. hopefully not the cause.Windows 8.1 issue? -> not sure but i have been able to use touch gestures for windows 8.1 since it was released until last saturday

9 more replies
Relevance 49.2%

Hi everyone,
I have a 1.5 year old Dell Latitude 3540 laptop, which I've recently upgraded to Windows 10 Pro (from 8.1 Pro). It has a non-touch screen.
For some reason, Windows 10 sometimes thinks it has a touch screen. It then shows the icon for the touch keyboard at the bottom right corner, and when going to Settings->System->About, under "Pen and Touch" it says "Touch support with 2 touch points".
This doesn't really bother me, as it doesn't seem to actually influence anything important. But still, seems pretty strange.
Did anyone else here experience something similar?
Thanks!

More replies
Relevance 47.97%

Hello, I just purchased this laptop and the touch screen is not working. Can you tell me if there is something i need to do in order to turn on the touch screen or maybe this means that this feature is not working. Thanks in advance 

Answer:Touch screen on Ideapad P500 Touch

HiSee this, should helphttp://answers.microsoft.com/en-us/windows/forum/windows_8-tms/how-to-enable-touch-screen-on-windows...Regards





Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

1 more replies
Relevance 47.97%

Hi everyone,  I am currently using a Lenovo T450s with the default screen option when checking out. I would like to upgrade to a touch screen. I would like to ask if:- the upgrade from non-touch to touch screen is possible?-where could I buy the touch screen for the laptop? would this one work? https://www.amazon.com/Lenovo-T450S-Touch-Screen-04X5911/dp/B01H0NKM5W/ref=sr_1_5?ie=UTF8&qid=147986... - where could i the basic guide to do it by myself? The most important question that I think is the first one: whether it is possible to upgrade from a non-touch to touch screen on T450s. I look forward to hearing all the suggestions.Thank you.

More replies
Relevance 47.97%

Im using the z400 touch notebook but I think I the driver for the touch capabilites were accidentally removed. where can I download the driver?

Answer:Z400 touch touch screen problem

hi alton1995,
 
Welcome to Lenovo Community Forums!
 
Touch driver is native to windows and there is no download for these models.
 
First can you check if the touch hardware is detected by winodws
 Open system properties and see if touch function is detected.

 
If Yes,
  Open Device Manager (Click on View and show hidden devices)  and oped Human interface devices.
     Uninstall Everything that starts with HID- hit restart Later if it ask for restart if you were done uninstalling everything yet.
     Once all that starts with HID- is uninstalled restart your computer and see if it will work.
 
Regards
Solid Cruver





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

5 more replies
Relevance 47.97%

Hi i am looking at getting a 3 monitor set up either adding 2 monitors to the all in one set up or using 3 monitors with a tower. I would like to get all the monitors to be touch screen monitors because the idea is to not use the mouse because its causing my arm problems. I'm going to use voice activation and an extended pen like a wand to touch the screen and drag documents between screens. Firstly, Just wondering if anyone has seen any limitations with this kind of set up? I'm aware i may need more than two Hdmi slots for example.   Secondly, will i be able to drag documents between monitors without using the mouse ie will my finger or pen allow me to do so?  Thanks for your help. MP 

More replies