Computer Support Forum

Lenovo G510 2. HDD disappeares from time to time o...

Question: Lenovo G510 2. HDD disappeares from time to time o...

Hi,I replaced the optical drive with a 2. hdd (with hdd caddy), but it disappeares frome time to time, randomly. I can see both drives in bios, but windows 10 cant connect it.i7 4702MQ, 8 GB ram, R7 M265 Kingston SV300S37A120G 120GB SSD in the main SATA drive1TB WD Scorpio Blue in SATA caddy

More replies
Relevance 100%
Preferred Solution: Lenovo G510 2. HDD disappeares from time to time o...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 85.69%

I have a G510, and everytime I reboot, I get a large bang output from no matter what source of sound is connected:
 
Either the built-in speakers, or the 3.5mm jack (earphones, speakers, etc..)
This sound is even painful when I have my earphones on, or even when the speakers are on, the bang sound is much higher than the current Volume level.
So if my volume is even at 5, whenever I reboot, there is a really loud bang coming out.
 
Has anyone else encountered this problem?
Is there a fix?
(running Windows 10)
 
Thanks
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.

Answer:G510 - Loud bang outputs every time I reboot my laptop (G510)

Welcome to the Lenovo Community !
 
From what you have described it would appear that when the audio hardware initializes during boot up the speakers or headphones output a loud bang or pop.  Have you tried uninstalling the audio driver, rebooting the computer and then install a fresh copy of the driver ?

3 more replies
Relevance 82%

Every time I power on my laptop it shows black screen.but fan is running and power lights are on. After detaching and reattaching battery several times onece screen turns on and laptop then works smoothly.but after shutting it down again on next day same problem persists. I have already tried power drain out method.but on the next go same problems arises.what to do.

Answer:My lenovo g510 shows black screen every time I power it on but the power lights are on .

Hi Anish1,
 
Welcome to the Forums  
 
As per the query we understood that you are facing issue with black screen in your Lenovo G510 laptop.
 
As you have mentioned that black screen when turned on, can you hear the windows login sound?
Remove the battery and connect only adapter and check for the issue also connect only battery and check for the issue.
 
Connect an external monitor and check if the display appears in the external monitor then its a issue with the LCD, if there is no display in the external monitor then it might be issue with the motherboard, hence suggest you to visit the nearest authorised service centre.
 
Click here for the service centre and select your region.
 
Best regards,                                                                                                                              
... Read more

1 more replies
Relevance 77.49%

I have problems with the boot time and shut down time of my Thinpad Edge. It takes about 30 seconds (the loading screen) after I log in using password until the desktop appears. And then everytime I shut down the computer, it keeps showing the "waiting for background program to close" screen but there aren't any program listed in the screen. Does anyone know how to improve this?

Answer:Lenovo Thinkpad Edge 14 experiencing slow boot time and shut down time

hey nitefury,did you install any new software or run and anti-virus programs ? There are some software that takes system resources but wont show at the "waiting for the background program to close" section.also check if you have any application that "runs when windows starts"





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

1 more replies
Relevance 75.03%

When I first bought my Lenovo G510, fan was really silent. But about 2 months has passed, and now fan is working all the time. Even if there isn't a single program open, the fan is still working. This is driving me insane, why is this like that? There is a sticker on the laptop saying "Silent Fan", but it isn't silent at all.

More replies
Relevance 75.03%

Hello,

I have here two Lenovo Yoga 2 13 which initialy run with Windows 8.1. After the Windows 10 Upgrade this two laptops starts to throw the BSOD 133. There is no way to replicate the BSOD. The two laptops can work for a week without the BSOD and the next week the BSOD 133 happens every second day and after this it works again for a few days. It happens when the laptop is in use or when it just stand there - I didn't see any thing which is always the same so I could say this triggers the BSOD.
I made a clean install (removed everything - partitions and so on) of Windows 10 Home on one of this two Yogas. But the bluescreen wasn't fixed. Same like before. Bluescreenview tells me always the same drivers: igdkmd64.sys or hal.dll or hdaudbus.sys and always ntoskrnl.exe. I updated the sound and gfx driver and tweaked the energy settings but nothing what I try helps. Did I miss something in the minidump files and another driver is the problem?

Thank you
Thomas

More replies
Relevance 75.03%

Hello,

I have here two Lenovo Yoga 2 13 which initialy run with Windows 8.1. After the Windows 10 Upgrade this two laptops starts to throw the BSOD 133. There is no way to replicate the BSOD. The two laptops can work for a week without the BSOD and the next week the BSOD 133 happens every second day and after this it works again for a few days. It happens when the laptop is in use or when it just stand there - I didn't see any thing which is always the same so I could say this triggers the BSOD.
I made a clean install (removed everything - partitions and so on) of Windows 10 Home on one of this two Yogas. But the bluescreen wasn't fixed. Same like before. Bluescreenview tells me always the same drivers: igdkmd64.sys or hal.dll or hdaudbus.sys and always ntoskrnl.exe. I updated the sound and gfx driver and tweaked the energy settings but nothing what I try helps. Did I miss something in the minidump files and another driver is the problem?

Thank you
Thomas

Answer:BSOD 133 from time to time on two Lenovo Yoga 2 13

Hi hitzi,

Welcome to the 10forums

Please check Lenovo for driver updates for the touchpad drivers for the Windows 10 Home system, per the dumps and WER logs the Synaptics drivers look to be causing the crashes.

Please upload logs from the DM Log Collector for the Windows 10 Pro system, analysis for each system is required as 2 systems having the same BSODs does not mean the causes are the same.

Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
The PSU, cooling and other stuff are NOT mentioned in the tool.How to fill in your system specs:

1 more replies
Relevance 73.39%

I got my y50-70 laptop four days ago for gaming and when i played portal for the first time i noticed I had a really hard time playing it. It wasn't until I was at Glados that I realized that it was because my laptop wouldn't recognize my finger movements while i was using the keys. Ive been researching this for the past day and can't find the solution, and I believe its because my settings seem to be different? Ive looked at multiple solutions and everything says to turn palm checking off, but I dont have that option? I can turn it down, just not off (it does nothing btw). I was wondering if anyone else has found the solution to this problem yet and came here.It would really help if you had pictures so I can figure out where to go in settings (a lot of the things Ive read has told me to go to a certain settings tab that I cant find??. Thank you so much btw!

Answer:G510 Can´t use keyboard and mouse at the same time

Update: I clicked around and somehow disabled elan. My problem is solved but I no longer have two finger scrolling (my favorite feature). If you're looking for a solution to this problem and dont care about zooming, scroling, ect, what I think I did to disable it was rolled my driver for my mouse back. To get there just search for device manager, click on the one that says something about mouse, and go to the driver tab.If you have another suggestion please suggest it!!! I can live without two finger scroll, but would like to have it :/

1 more replies
Relevance 73.39%

I have a Lenovo G510 and Windows 8.1. I cant use keyboard and mouse at the same time. When i typing the mousepad locks. I guess this is a feature but I want it turned off but I dont know how to do that.
 
I have tested with the drivers for Windows 8.1 and Windows 8, listed here: http://mobilesupport.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g...
 
I then even tried with installing the driver for Windows 8 from: http://www.synaptics.com/en/drivers.php
But when I got through the installation process the "installation program" says the driver couldnt be installed.
 
I tried with the advice in this thread: http://superuser.com/questions/504571/use-touchpad-while-typing
but I have synaptics 7.5 and not 7.4. I also tried fixing with the register but didnt find the entry PalmKms. I did do find other entries with Palm.
 
I see this as a major problem since it makes me completely unable to use any program that require simultaniously use of the keyboard and mouse. Therefore I guess that must be a solution for this?
 
If a solution requires fixing the register thats not a problem for me, I only need to know what to change! But I guess that must be something simple I missed?
 
Moderator Note; subject edited













Solved!

Go to Solution.

Answer:G510 Can´t use keyboard and mouse at the same time

I managed to install the Synaptics driver from the Synaptics website(with that driver you had an option for disable palmcheck which dont existed in the drivers from the Lenovo site) . Since windows 8.1 wont sign it correctly it fails to install. In order to be able to install it you need to "disable driver signature enforcement" which you can do after a restart. Heres instructions: http://www.howtogeek.com/167723/how-to-disable-driver-signature-verification-on-64-bit-windows-8.1-s... Finaly I can turn off palmcheck I hope this helps someone with the same problem.

1 more replies
Relevance 72.98%

Hello everyone, I'm really upset with sound driver (conexant) being glitchy and buggy all the time, I literally can't go a day without facing a problem because of it and specially on multi stream, I tried to give up on multi stream and use classic mode but the sound quality on headphones was so bad, I tried all the drivers on the official download center with all compatibility modes, I installed audio driver of Windows 7 with W7 compatibility, it worked well solved many problems but it ends up crashing on other softwares, I even tried the driver that Microsoft provides and it's even worse, I hope you guys have a solution to all that, by the way I never change stuff like bitrate or anything like that I live all settings intact, I'm really angry and frustrated because of all that.Update: I use Windows 10

More replies
Relevance 71.34%

I am using Lenevo g510 from past 1 year and I m totally fed up by installing windows again and again.. It crashes for no reaaon. Few time I found that it was due to pen drive. Read in internet that Lenevo has some issue related to pen drive flash something.. I cant even start my laptop in safe mode. I tried pressing f8 keys in all the way. It just doesn't work. I can see nothing but Lenevo logo and it keep restarting..Again read online that Lenevo has bug with safe mode as well..

Answer:Lenevo g510 - safe mode doesn't work and it crashes all the time

Hi KishorBaindoor,
 
Welcome to the Forums  
 
As per the query we understood that you are facing issue with system unable to boot into safe mode in your Lenovo G510 laptop.
 
As you have mentioned that the system restarts try to boot the system into BIOS and check if the system restarts,
 
Please mention which operating system you have installed.
 
Let us know the result..
 
Best regards,         
 
Ashwin.S





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 70.52%

Hi, I have problem with my laptop. the problem is that quite long time to start to windows 8.1.When I push power button, black screen stays for 1-15 minutes and then starts normally (appear lenovo logo then windows start). For this moment i tried:-reinstall windows- nothing happend-power on/off with/without battery-the same as above-detach this little battery to reset bios- nothing-change ram stickThe last thing I tried was update BIOS. Downloaded the latest version (3.09) of BIOS. In windows restarted and failture (invalid firmware image) . I know that i should disable Secure Boot- done (BIOS says that is disabled) and the same message. I tried download 6 times and all failture. Tried disable UEFI but still the same message.I have BIOS ver. 3.05From time to time I think that could be graphic card but in this case laptop screen should be still black

More replies
Relevance 70.52%

Hi, I have problem with my laptop. the problem is that quite long time to start to windows 8.1.When I push power button, black screen stays for 1-15 minutes and then starts normally (appear lenovo logo then windows start). For this moment i tried:-reinstall windows- nothing happend-power on/off with/without battery-the same as above-detach this little battery to reset bios- nothing-change ram stickThe last thing I tried was update BIOS. Downloaded the latest version (3.09) of BIOS. In windows restarted and failture (invalid firmware image) . I know that i should disable Secure Boot- done (BIOS says that is disabled) and the same message. I tried download 6 times and all failture. Tried disable UEFI but still the same message.I have BIOS ver. 3.05From time to time I think that could be graphic card but in this case laptop screen should be still black

More replies
Relevance 70.11%

Hello, folks.

I'd just like to say that I have been coming here for quite some time and never even needed to make a single post because you had all the answers waiting for me, and I should thank you all a great deal for that. One of the finest communities on the web, and I'm proud to say I've linked at least a couple of dozen people to these boards, if not more. They all have recieved great help as well.

This time, however, I don't think I am capable of helping myself, and I think I require the assistance of a pro. I myself, while having been able to help myself before, really have very little knowledge of this stuff. Now, I did almost everything in the READ ME AND RUN ME FIRST thread, a few things I was not able to do. I think I know which malware problems I have, I am just unsure of how to rid myself of them, and I'd rather not take a chance and delete something important.

Anyway, I have attached my HiJack This log file, hopefully someone can find the time to help me as this site has many many times before.

Thanks, all the best...

-Eric
 

Answer:Long time reader, first time poster...Big time problem...

I need the logs from the two online scans listed in the READ ME.





6: Online Virus And Trojan Scanning

Please run the below two online scanning tools and make sure you save and attach the logs later to any request for help that you post. From step 5 you should already be in safe mode but you will need to reconnect your cable now and possibly reboot and choose Safe Mode with Networking Support. If you cannot connect in safe mode for any reason (like dial-up users), run the online scanners in normal boot mode. You will need to use Internet Explorer to run these online scans.

*** MAKE SURE YOU RUN BITDEFENDER BEFORE PANDA ACTIVE SCAN ***

Bitdefender agree to the license and then select Scan. Once Bitdefender completes the scan:

Click-on Click here to view the report

When the window comes up with the report. Click File, Save As.... and then change the Save as type to Text File (*.txt)

Change the file name to something short like bdscan1.txt

Then save it to your Desktop or anywhere else you can find it to upload here as an attachment.

Post the bdscan1.txt file as an ATTACHMENT.

Panda ActiveScan It will only fix certain viruses and trojans. Most items found will not be fixed. When it finishes the scan click on See Report . Then in the next window click Save Report. The default report name is Activescan.txt. Just save it where you can find it so you can attach to your message when you begin a thread with a request for help.

Cl... Read more

12 more replies
Relevance 67.65%

It's critical that my PC keeps the exact time as I record TV shows on it so just a few seconds off one way or the other will make me miss the start or end of my shows.

I found it was drifting off too much between syncs so I found a program that lets me set it to sync daily, however it seems like most of the time it gets the time completely wrong, often as much as 30-90 seconds off. I did notice that when syncing manually in the time settings it normally gets the right time each time, so I don't know why the scheduled syncs get the wrong time.

I did try several of the time servers with the same results.

Is there just no way to get the Windows time sync to work properly and if not are there free third party programs that can do it reliably?

Thanks

More replies
Relevance 64.78%

H,
can somebody give me the name of the bios chip on the Lenovo G510, my bios chip is fried and i need to replace it.
It is defintely dead I have done the whole hold FN + R and adding power outlet, pressing the power button then releasing the buttons. The fan starts up and the middle light flashs like crazy and then it shuts off. No sign of the lenovo splash screen either. Just a blank screen.
 
Can someone give me the name of a suitable bios chip replacement?
 
Thanks
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity

Answer:G510 - Hi can somebody give me the name of the bios chip on the Lenovo G510

Have you tried leaving the battery out and powering up via AC adapter?  The fast blinking middle light is for an issue with battery or battery connector and not the BIOS. 
 
Make sure the battery connector pins are straight and undamaged (not shorted) and try removing battery and ac adapter then press and hold the power button for more than 30 seconds.  Power up via AC and let me know what happens.
 
I suggest this becuase most notebooks do not have a replaceable (EEPROM) bios chip socket - they are usually hard soldered in.
 
Good luck.
 
CB

3 more replies
Relevance 63.96%

Recently i bought a Lenovo y500 laptop with 12 ram and 16gigs of SSD. It came with Windows 8 by deffault and what i wanted was to install Linux Ubuntu 12.04 alognside with the Windows 8. It didn't work out, because i could only log into linux. When i tried to log in in Widonws it said: "unknown command drivemap      invalid EFI file path, so i used the one key recovery.It loaded Windows but i noticed 2 things:1st. After loading the Lenovo logo the screen turns black without the cursor on it and stays that way for about 17-25 sec. That means that from 20 sec boot time now it is 40+.How could i fix that one?2nd. After creating the backup i divided the 1tb disk into smaller discs and after the rocovery they were the way i left them with all the games and media on them. I thought that the one key recovery would undo the partiton i have made.The 2nd one isnt bugging me out so much but the 20 secs extra boot time do. The changes i have made in bios are disabling secure boot and switching boot mode from UEFI to legacy. After that i switched secure boot to enabled and the boot mode to UEFI as it was in the beginning. 

Answer:Lenovo y500 black screen after the lenovo logo slows down boot time

hi psskobraa,
 
Welcome to the Lenovo Forums.
 
Regarding your questions:
1. The additional 17-25sec boot time is probably caused by the UEFI Firmware / UEFI boot loader (see this flowchart) - this probably got modified when you installed Ubuntu. Can you try to boot back into the BIOS, press F9 to load default settings then press F10 to save It settings. If this doesn't work, is the boot time the same when Disabling Secure Boot and UEFI set to Disabled/Legacy first?
 
2. OneKey Recovery usually reimage the OS partition only (i.e. C:\) and will not affect any other partitions (i.e. D:\)
 
 
Best regards,
neokenchi

2 more replies
Relevance 63.96%

when i turn on my laptop it takes almost 6-7 sec to show lenovo logo...why is that delay???i have never seen that in any desktop or laptop...after pressing power button the screen remains black for 6-7 sec  and then i get lenovo logo... actually that is when the laptop starts...so whats the solution for this problem or its just lenovo special.... 

Answer:lenovo 3000 G530 Takes Too much time to show lenovo logo

nobody has this problem???

6 more replies
Relevance 61.5%

If I am in the wrong forum, please let me know.

About a month after I started using it, the Say the Time clock program I bought stopped launching the management menu when I right click the date/time field in the task tray (notification area).

Therefore, I can't use or edit the program.

Neither the touchpad nor the cordless mouse works.

Other than this problem, my computer works great. Every single item that's meant to be right clicked works for me.

Is there a way I can generate a log to show the software manufacturer (Provenio) that it's their problem and not mine?

I am a novice user but I can follow instructions.

However, I don't want to put my computer at risk if I make an entry error.

Or is it obvious that it's a software problem?

I've been using computers for 18 years and I've never had this problem until I bought this software and used it for about a month.

I just wanted a conclusive way of putting the ball back in the manufacturer's court.

Thanks for any suggestions.

Regards.

Answer:Say the Time Date/Time Field in Task Tray Doesn't Launch Menu

You can use VEW by Vino Rosso http://images.malwareremoval.com/vino/VEW.exe
and save it to your desktop

Double click it to start it Note: If running Windows Vista or Windows 7 you will need to right click the file and select Run as administrator and click Continue or Allow at the User Account Control Prompt.

Click the check boxes next to Application and System located under Select log to query on the upper left

Under Select type to list on the right click the boxes next to Error and Warning Note: If running Windows Vista or Windows 7 also click the box next to Critical (not XP).

Under Number or date of events select Number of events and type 20 in the box next to 1 to 20 and click Run
Once it finishes it will display a log file in notepad

Please copy and paste its entire contents into your next reply

5 more replies
Relevance 61.5%

I have written the TOC code and some other functions in while loop. When i execute the forms each time , the output will get generate and it will be in pdf format. And each time one TOC page also gets generate. How can i have only one TOC page and it should get update when forms are executed(TOC contains form names and page number). TOC is table of content in tcpdf.

More replies
Relevance 61.5%

Hi,
I am using Nokia Lumia 720. The results are the best so far.
However today I started facing following issue.
It is giving me the message 'Slide down to power off' automatically in regular intervals without clicking any button.
When I slide down it should shut down and stay shut down till I start again, however it is restarting automatically and again flashing the same message.
The middle button is not working for me.
Can anyone please advice me what can be the solution for this ?
Regards
Aaswad Waghmare

Answer:Nokia Lumia 720 Automatically giving message time to time 'Slide down to power off'

Seems like the power button is stuck. If your phone is still under warranty, send it for repair. If not, try removing the battery cover. then turn on the phone without the cover installed.

13 more replies
Relevance 61.5%

I am the owner of the company and the closest thing we have to an adminstrator. My desktop is running slow, internet is very slow and keystrokes are delayed quite often. The keyboard is wired so I know it is not a battery situation. I have run virus scans until I am blue in the face, it has not fixed the problem. I had an IT tech install SYmantec ENdpoint about two years agao and it seems that has been causing problems as well. I have tried to remove Endpoint protection from the desktops and network server but it will not fully uninstall. I do not know if that is part of the problem. Attached is the DDS log and Gmer log.

Please help.

Answer:Computer is slow, keystrokes are delayed, internet is sl0w and redirects from time to time.

Hello and Welcome to the forums! My name is Gringo and I'll be glad to help you with your computer problems. Somethings to remember while we are working together.Do not run any other tool untill instructed to do so!Please Do not Attach logs or put in code boxes.Tell me about any problems that have occurred during the fix.Tell me of any other symptoms you may be having as these can help also.Do not run anything while running a fix.We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.Click on the Watch Topic Button and select Immediate Notification and click on proceed, this will help you to get notified faster when I have replied and make the cleaning process faster.In order for me to see the status of the infection I will need a new set of logs to start with.Please print out or make a copy in notpad of any instructions given, as sometimes it is necessary to go offline and you will lose access to them.DeFogger: Please download DeFogger to your desktop.

Double click DeFogger to run the tool.
The application window will appear Click the Disable button to disable your CD Emulation drivers Click Yes to continue A 'Finished!' message will ap... Read more

15 more replies
Relevance 61.5%

Automatic date and time was incorrectly displayed so we changed it manually to correct date and time and power cycled the device off and on and the date and time again is incorrect.

More replies
Relevance 61.5%

it happens time to time and is usually when i open adobe photoshop,aftereffects. Also i cannot seem to open any kind of games on my new computer like fifa 13 ,nfs etc. I have an i7 3770 and 8 gb ddr3 corsair RAM with 1 tb hdd and motherboard is msi B75MA-P45 and geforce gtx560 for graphics card. my FSB: DRAM reads 1:6 on cpuz, does this have anything to do with the blue screen ? should i do anything in the BIOS settings ?

Answer:New built computer bsod's time to time.stop error 0x000000a

Hello Sonam.

Nice configuration. But it is the display driver that caused here.

Code:
fffff880`0a48fb88 fffff880`0ffb47c9Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0xbd7c9
What I have seen, the October edition is somehow problematic on a lot of machines. So I would suggest you to do what I did myself.....
Uninstall nVidia display driver using Driver Fusion , and then install an older version which was stable there.

And, you should install Service Pack 1.

Let us know the results.

4 more replies
Relevance 61.5%

From time to time the LCD went black and recover after seconds. Vista message: "Display driver stopped responding and has recovered."Display driver igfx stopped responding and has successfully recovered.  Anyone has similar thing? I'm worrying maybe one day it will not come back. Message Edited by legendbb on 07-04-2009 06:42 AM





X1, T520, T61p, T60, X61t, T40

Answer:X61 Tablet "Display Driver Stopped Responding and Has Recovered" from time to time.

Just had this the other day. So far it has always recovered. I haven't found any systematics in when this happens. -Joe

3 more replies
Relevance 61.5%

Has anybody else experienced this problem?

I open Event Viewer - "Admin View" to see what Errors/Warnings are there and in the column - Date and Time only the date is showing. Same goes for all the other views.
The "Time" element seems to have completely disappeared.

Any idea where its gone........... and more importantly, how to get it back?

Thanks

Answer:Time stamp missing from Date and Time column - Event Viewer

Problem solved - but - I don't know why.

Solution:- I changed the Date/Time format from UK to US, opened Event Viewer and it was as it should be. Date & Time showing.
I then changed format back to UK, opened Event Viewer and , as above, the Time was back up.

If anybody knows what had happened I would be most interested.

My thanks to Bill............. from another site for helping me out with this one.

1 more replies
Relevance 61.5%

Dear All,

I hope you can help. Recently bought a new LaCie Wireless Space.
I am connected to it as a wi-fi router to get onto the internet.
However, my Time Machine software will not recognise it as a time capsule.
If I search for it in Airport Utility I a message that says "Airport Utility was unable to find any Airport wireless device" etc etc. Yet I am currently connected to it on wi-fi.

Also, if I open Time Machine and "select backup disk" the following appears:
MyShare on "WirelessSpace (Time Machine)"
&
OpenShare on "WirelessSpace (Time Machine)"

But on selecting either of them the following message appears:
Time Machine can't access the backup disk "MyShare". (or "OpenShare")
The operation couldnt be completed. (OSStatus error 5.)

Finally, if I go into my Disk Utilities , there is no LaCie Wireless Space icon in the left column
&
However, there is a Wireless Sace (Time Machine) icon under the "Shared" column when I click on the computers hard drive icon on the desktop, BUT is states "Connection Failed"

I really have no idea where else to look and what else to do - other than contact LaCie - but they have not got back to me now for 3 days.

Any ideas????
 

More replies
Relevance 61.5%

I noticed the time on my phone was about 3 hours later. So in my settings I did the time manually to correct this. Since then when I receive text messages it shows as being hours in front now when we have not got there. E.g. Received a txt today showing time as 19.20 when actually I just sent a reply @the correct time of 16.37.
How do I get the texts received to show as the current time?

Answer:When I receive texts on my Nokia lumina 635 the time is showing as 3hours later than the time. Why?

Check your time zone settings.

2 more replies
Relevance 61.5%

Hello,

Satellite A100-192 PSAA9 with ATI X1600 video card.

Despite the fact that I have installed the most recent driver from the Toshiba support site, display darkens (turns off) from time to time with no apparent reason.

I turn off the computer by pushing the on button for several seconds.

When I turn the computer on, the display is still dark although computer boots.

Only after I take the computer battery off and on again and then turn the computer on, the display is OK.

I haven't been able to find out whether it's a hardware or software issue.

Computer is one and a half years old.

I wanted to find out whether anybody has had such an experience before I take the computer to the service center.

Answer:Satellite A100-192 PSAA9: display stills black from time to time

Do you use the Toshiba original preinstalled factory image??

3 more replies
Relevance 61.5%

I've been using Webroot Anti-virus with Spy Sweeper but am looking to change as viruses have recently crippled my computer.

I am interested in using Avast and malwarebytes. Can they both be used for real time protection or would they conflict with each other (and/or take up too much resources)? I am looking at getting the paid version of malwearebytes for real time protection.

Would running only one of these programs as real time protection sufficiently protect my computer from virusues, malware and spyware or would using only one leave me vulnerable?

Thanks for any insight here.

Answer:Is it a good idea to run Avast and malwarebytes (real time protection) at the same time?

I see you have an open log topic here: http://www.bleepingcomputer.com/forums/t/309829/google-redirect-fake-virus-warnings-antivirus-plus-popup-xp-security-center-and-other-assorted-issues/Please finish up there with m0le before making any changes to your system not called for by m0le.But to answer your question, I highly recommend Avast. As for MBAM, I use the free version for on demand scans. Read this:The full version of Malwarebytes Anti-Malware includes the ability to schedule updates and provides a real-time malware protection module that stops malicious processes before they can infect your computer. The Protection Module is not intrusive as it utilizes few system resources and should not conflict with other scanners or anti-virus programs. Keep in mind that Malwarebytes does not act as a real-time protection scanner for every file like an anti-virus program so it is intended to be a supplement, not a substitute. Those who purchase the full version receive a license key via email which includes a lifetime of free upgrades and support. For corporate and business customers, annual licenses are required.Also:Choosing a security toolkit with anti-virus, firewall and anti-malware programs is a matter of personal preference, your technical ability and experience, features offered, the amount of resources utilized, how it may affect system performance and what will work best for your system. A particular combination that works well for one person may not work as well for anot... Read more

3 more replies
Relevance 61.5%

I just replaced my laptop motheboard. With the new motherboard, time always reset after shutdown, and sometimes the little internet icon in the bottom right corner would be invisible. So i upgraded my bios, and still have same problem. I have a LENOVO G470 with InsydeH2O BIOS. I have an image of the bios attached. Also, the bios can read the HDD.

Answer:BIOS showing invalid info, time resets every time shut down.

Did you install a CMOS battery? Is it new or used?
Check the Time zone, make sure it's correct.

9 more replies
Relevance 61.5%

Moving between UK and Europe there is a 1 hour time difference. Previous phones get the local time from the network - not the 640!!!
Stuck on UK time is quite embarrassing turning up for a meeting 1 hour late.
Have checked the phone settings - automatically detect is selected in Time / Date area.
Anyone able to help?

More replies
Relevance 61.5%

Hi there! I'm running windows xp home on an hp pavilion a400n, although I'm not sure that matters. I also use Firefox as my default browser.

I've downloaded a Google gadget, the calendar, to my desktop. I use the google calendar as my primary appointment book.

The problem is that the time in my calendar gadget and the time in my actual calendar aren't matching. I enter an appointment into my calendar, and then refresh my calendar gadget to see the updates, and the times on the gadget are on hour earlier than the actual calendar.

In trying to figure out what's happening, I also noticed that the timestamps on my messages, incoming and outgoing, are the same time frame off. When a message comes in or goes out, it immediately shows that it's an hour old.

I went in and made sure the operating system clock and the google gadget clock are on the same time and showing the same DST settings. But I'm still having the same problem.

Is there another clock setting I'm missing?

Help, please!

cwazylady
 

More replies
Relevance 61.5%

Hello. Here is my issue short and sweet.

When I use ANY of the web based emails (Yahoo, Gmail, Comcast) on computer A, all of my emails are stamped an hour earlier than real time. By real time, I mean the clock on the computer AND the analog tick-tock clock on my kitchen wall. Both display the correct time accurately.

When I use ANY of the web based emails (Yahoo, Gmail, Comcast) on computer B (or C or D), all of my emails are stamped with real/correct time that matches my kitchen and computer. These computers ALSO reflect correct time.

With either computer, any file created or saved has a date and time stamp that is correct and reflects real time. Whether saved with a web app, a windows app or a cmd line app.

On all computers my time zone is set correctly. The "adjust for DST" box is checked. I also ran TZEDIT to confirm that my DST dates are correct.

One revelation (and I believe herein lies the key). If I look on computer A at the bottom of the "Date and Time Properties box: the current time zone says : Eastern *STANDARD* time. If I look at computers B, C or D. The "Date and Time Properties box says: current time zone: Eastern *DAYLIGHT* time. I can not find any way to change the "STANDARD" to "DAYLIGHT".

Now for the big question. How is this resolved?

Thank you.

PS. As mentioned in other posts, Adjusting the clock on computer A an hour ahead resolves the email issue, but now any file created or modified has the incorrec... Read more

Answer:Web based email Time zone issue wrong time stamp

Double click your clock, click on "Timezone" tab and tick the box for 'Daylight savings'. If need be adjust your timezone from there.
 

2 more replies
Relevance 61.5%

One thing that was badly missing in Windows 8 Start Screen was a clock. But now, this shortfall too has been overcomed. Dave Smits has developed a clock application for Windows 8 Start Screen ? Clock Tile. The application makes your start screen complete with a tile that displays time in a live tile and supports x86 and x64 ARM processors. It however, does not include any options for customization. Another feature that is seen as a shortfall is that the date and time appear on a small pprtion of the large tile.
Apart from this, the app is good and ready for download from the Windows Store. Remember, when launched for the first time, Clock Tile asks for your permission to run in the background.

More replies
Relevance 61.5%

Outlook Calendar shows start time in the monthly view but not the end time. I have right clicked on the calendar gone to Other Settings and checkmarked "Show End Time" but the end time still does not show. How do I make the start and end time show in the monthly view?

Answer:Outlook Calendar shows start time in the monthly view but not the end time.

You did not say what version of Outlook.

I am using Outlook 2007 and note the same as you - only the start time is displayed. I note on mine, if the end time was displayed, there would be little to no room for the Subject title so for me, I would rather have the appointment title instead of the end time. I think in a crowded field (as the monthly view can be) that is best for most people.

I don't see a fix for you. However, for a workaround, with Outlook being in "focus", if you hover over the appointment with your mouse, then the stop time is also displayed in a bubble.

3 more replies
Relevance 61.5%

Hi! I have put a "Total Time" field in a form to calculate the difference in minutes from the "Start Time" to the "End Time". I was worried about getting the incorrect time span when the time crossed over midnight. Well, I got that part right, but when I enter times in the same day (1:15pm-1:30pm) it gives me the time difference PLUS 1440 minutes. Please tell me what I need to do to fix this! Thank you!

Total Time:
=DateDiff("n",[Date]-IIf(1-[Start Time]>[End Time],0,1)+[Start Time],[Date]+IIf(1-[Start Time]>[End Time],1,0)+[End Time])
 

Answer:Solved: Start Time End Time Difference in Microsoft Access 2000

9 more replies
Relevance 61.5%

Avast Anti-Virus prevents to send emails time to time, it occurred on a computer in my home network, and then on the other one. This Avast does not issue any messages, just emails remain in the Outbox and do not
appear in Sent items.
I know three ways to send emails in this situation. All this three ways are bad.
  1) Exclusion of scanning outgoing emails in the avast settings. This is bad, since sending emails goes unchecked.

  2) Exclusion of checking port 80 in the avast settings. I found it here -
https://forum.avast.com/?topic=143284.0  There is explanation there, why it is bad.

  3) Restart of the computer, just after restarting outgoing emails go normally.
My post app is Live Mail 2012 (Build 16.4.3528.0331). 
Can somebody explain this? 

More replies
Relevance 61.5%

in Win 8.1, I made the background change to every 10 seconds. (I get board easy).
The time limit of the Slideshow for Backgrounds on the lowest setting in Win 10 is 1 minute.
I want to reduce this. can I change it in System 32 ? or device manager or system.ini ?
and do I have to go in as the Administrator to do so ?

Answer:How can I reduce the background time to 10 seconds from the 1 minute time limit Win 10 offers?

How to set Slideshow to every 10 seconds and enable shuffle in Windows 10 | Windows Central

2 more replies
Relevance 61.5%

Not sure if any one has already posted this and got replies...my T400 has a strange issue. it takes a lot time in pre-boot... a cursor blinks on the top left corner for 5+ minutes and then loads the 'Windows loading...' screen for about another 5 mins and finally shows the windows logon screen. Additionaly, when i hit shutdown, i am fine. if i hit restart - i am sitting there for ever.  my laptop has 8GB RAM + 256 GB SSD + Windows 7 Ultimate x64. 

Answer:T400 boot time takes long time & has issue with restart

Srini shared the following observation via twitter... perhaps the community can help?
 
@lenovoforums my T400 takes 10mins to boot; and doesnt restart properly. looks like a famous issue every one has out there #lenovo #thinkpad

9 more replies
Relevance 61.5%

Playing Skyrim runs fine for at least 30 minutes before the bsod. This has happened several times, this is the most recent crash. Zip file attached.

Answer:BSOD playing Skyrim, 1000007E this time. New crash code each time

The latest BSOD was caused by the Linksys AE2500 driver, check if there's a newer version available.

fffff880`06040000 fffff880`06177000 AE2500w764 Tue Mar 29 02:22:08 2011 (4D912630)

2 more replies
Relevance 61.5%

hey guys,

i just bought a new M-Audio Audiophile 2496 soundcard to enjoy great sound in a foobar2000 + flac combination.

i've successfully installed the Vista 32bit drivers in compatibility mode and everything worked fine until then.

after starting to listen to music, i've experienced that from time to time (doesn't matter if i do something with the PC or just leave it there only playing music) the sound starts hanging (and it sounds like stuttering) for 1-3 seconds. then it comes back to normal...and a few minutes later it happens again. it's VERY annoying...

tried playing with WMP (wasn't happy about it) but the same happens.
tried vista 64bit drivers but couldn't install them. tried old Windows XP SP2 drivers, installed fine but no sound.

any1 got any ideas?
am i the only one who has this issue? did i buy a broken soundcard?

please help.

thanx alot in advance

Answer:M-Audio Audiophile 2496 sound hanging/stuttering from time to time

m-audio are not very 'windows' friendly. they really haven't released a decent driver for xp x64 yet, let alone vista. great cards for linux and apple though, and xp 32bit. i wonder if any of the E-MU options in this price range would fair better...you could always go usb/firewire gear for recording...

3 more replies
Relevance 61.5%

Hi,
My Satellite P750 always shuts down on the first start up each day, but the 2nd start up works fine and no other problems..

I press the start up button and it runs for maybe 10-20 seconds then shuts down.. it does this both on battery or on mains power..

If I try to start again after this, it starts up fine.. sometimes it gives the option to boot in safe mode, or to run startup repair, but it always start up fine and runs normally..

I have tried start up repair when the option was given, and it makes no difference as the next day it does the same thing again..

Any advice much appreciated, and Im a little concerned that one day it wont start up second time..

The laptop is only about 6 months old, and otherwise runs great..

Thanks

Answer:Satellite P750 shuts down on start up 1st time but then works fine 2nd time

Hi

Recovery the notebook back to factory settings,.
Are you using the Win 8 or Win 7 system?

Usually the Win 7 notebooks supports an HDD recovery by pressing F8 -> Repair my Computer -> HDD recovery.

If the same problem will appear straight after the system has been recovered, I presume there is an hardware problem and an service technician should check the hardware parts.

3 more replies
Relevance 61.5%

Hi All,

I imported a text file into the Access but I got Type Conversion Failure Error. All the errors are in the Time Stamp fields. I tried changing the format of but provided options lets me select only date/time
format there is no way I can change the format to long time while converting my imported file. I am getting an additional error file which consists of Type Conversion Failure Error the column name & the row number. How do I change it  to only get
recognized s a time stamp field.

Please help me out in this.

Thanks,

Vinod

More replies
Relevance 61.09%

Hello everybody, Can help anyone to resolve my problem.I have an Thinkpad W520 (42823FG), BIOS 8BET60WW 1.4        When I disconect AC power and remove battery and connect again, I see this message on screen:"Real Time Clock Error - Check Date and Time settings, System CMOS Checksum badPress Esc to continue or F1 to enter Setup" Is this a system board problem or CMOS battery problem ? Thank you 

Answer:Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad

Hello and welcome,
 
It's probably (hopefully) just the CMOS battery.  The easiest way to find out is to just replace that battery.
 
Page 85 of the Hardware Maintenance Manual:
 
Hardware Maintenance Manual
 
Here's an example of the battery.  I'm not recommending (or not) this vendor:
 
http://www.ebay.com/itm/New-Lenovo-ThinkPad-W500-W510-W520-W530-W700-W701-W701ds-CMOS-RTC-Backup-BAT...
 
Z.

1 more replies
Relevance 61.09%

When I start the computer up, the Windows Boot Manager screen comes on. I press enter, but every time the desktop comes up, the icons have rearranged themselves to be as close to the left hand side of the screen as possible. Also, the computer is chucking me out of games sometimes, when before they didnt. Could I be infected?

This is the first post I have done on this forum, so if I have done something wrong, please let me know. Thanks

Answer:Windows Boot Manager comes up every time I turn on the computer, Icons re-arrange themselves on desktop every time i start up t...

Hello. Have I done something wrong in my posting? Please let me know if I have. It has now been over 48 hours since I asked my question. Has anyone ever had this problem before or am I over-reacting.

Thankyou

2 more replies
Relevance 61.09%

I need help writing a formula to subtract the end time of an event from the start time of the event. I have tried searching functions by asking for a formula to "subtract end time from start time" and variations on this, but keep coming up with TIME(hour,minute,second) or HOUR as the option under "select a function".  I am working in Excel 2007, and I have my times listed as "8:30:00 AM" and "1:00:00 PM" which is the time format as provided by Excel.  Here is an example of my formula:(cell A1 reads) 8:30:00 AM(cell A2 reads) 1:00:00 PMFormula:  =(A1-A2)   Answer when requested as time: ########################################Answer when requested as number:  -0.19It seems so simple, but I am so frustrated!  I need it to build an excel spreadsheet for my boss.Thank you!

Answer:Create Excel Formula to subtract end time from start time

Quote from: LadyGlenProd on June 08, 2010, 02:57:36 PMI need help writing a formula to subtract the end time of an event from the start time of the event. I have tried searching functions by asking for a formula to "subtract end time from start time" and variations on this, but keep coming up with TIME(hour,minute,second) or HOUR as the option under "select a function".  I am working in Excel 2007, and I have my times listed as "8:30:00 AM" and "1:00:00 PM" which is the time format as provided by Excel.  Here is an example of my formula:(cell A1 reads) 8:30:00 AM(cell A2 reads) 1:00:00 PMFormula:  =(A1-A2)   Answer when requested as time: ########################################Answer when requested as number:  -0.19Formula:  =ABS(A1-A2)  Format:  Formula as Time, in type 13:30, i.e. no AM or PM(Formula cell):  4:30

3 more replies
Relevance 61.09%

Hi,

I am running XP Home SP3 on an Asus 1005HA netbook

Every time I boot up I get a message to say that either I can press F1 to enter setup to set date/time or press F2 to load default values

If I choose F1 and enter the correct date/time and press F10 to save and exit - XP then starts up normally but the next time I boot up, the same problem occurs.

[If I select F2, then XP loads normally]

What can I do to fix this?

Thanks for any help in advance
 

Answer:Solved: CMOS Set date/time message every time I boot up

Your motherboard battery is dead. You can get a new one at any drug store for about $5.
 

3 more replies
Relevance 61.09%

Hi folks,

In power options you can switch off the monitor only by time idle. I would like to be able to set a time of day. I can't see an inbuilt way of doing this, so does anyone know of a good application which will allow me to do this?

Thanks in advance,
Ox.
 

Answer:Solved: VISTA - need an app to set power options by time, not idle-time

13 more replies
Relevance 61.09%

Hello.

I have been experiencing bluee screens of death in the last 9 months.
Sometime , at 3-4 days it just happens , randomly.
I hope you guys can help me.
System specs :

Intel Quad Core 2.5 GHZ
8 GB RAM
ATi RADEON 5850 HD
OS : Windows 7 x64 Ultimate full

The age of the system is about 2 years except for 4 gb ram and the video card which have been added last year.
the OS was installed when I added the parts above , so it's 1 year old.
The BSOD happens even if I am in a game , or on desktop , or in messenger.

I am attaching the file with the dumps and the health report to this thread.

Thank you

Answer:Random BSOD , from time to time , during normal daily activity!

the desktop window manager is crashing.
Are you using any custom themes or shells?

I do notice one problem you have though. You have the old Asus utility driver.
This needs to be replaced as it's a known trouble maker in windows 7.
I happen to have an asus board myself.
the new copy of the file will be attached here.
Manually overwriting the old one will work (I did it on my own system)
however, you will need to boot Safe Mode and locate ASACPI.sys
by navigating to c:\windows\system32\drivers
and overwrite the copy of the file there with the one I'm providing.
Then reboot normally.
This will solve that issue at least.
If the problem generally happens when the computer is entering a low power state, this would definitely be the cause of your problems.


Code:
Probably caused by : win32k.sys ( win32k!HmgLockEx+a3 )

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff96000144613, Address o... Read more

3 more replies
Relevance 61.09%

Okay, so everytime I run Chkdsk it always finds errors on the disk. I am unsure why, but if I run chkdsk back to back, it will keep constantly find new errors every time. Also, the Chkdsk takes about 2 and a half hours to complete, and always gets stuck at 10% for most of that time. [I run Chkdsk /f /r, it reboots the computer and runs]

This is what I have tried so far:
1) Running SFC /SCANNOW. It has fixed errors in the past used alongwith DISM. I just ran SFC again to be sure, no errors found.
2) Checking computer for malware. I have Malwarebytes Pro and Bitdefender Pro. I seriously doubt malware caused this since I have at most found 5 minor threats on my computer in the past year. Just to be sure, I ran a few scans in safe mode with Malwarebytes, and Hitman Pro, etc. All clean.

More Info on my problem:
The reason why I found out about the Chkdsk problem is because my computer has started booting up slow. About 2 weeks ago my computer would take 10 seconds to go from POST to login screen. Now it takes over 75 seconds [With Windows 8 Fast Start up Enabled]. I began investigating why, with no apparent reason. No big start up items, nothing running at start up that shouldn't be there.

Lately, I have been reading Errors and Warnings in Event Viewer as an idea to figure if anything was wrong. I have dealt with a few errors individually, but no improvement.

Here is some Info on programs I use on my computer.
1) Malwarebytes PRO [In Startup]
2) Bitdefender Total Security 2015... Read more

Answer:Chkdsk finds errors every time I run it [Slow Boot Time]

What make of hard drive? Best to run their drive checking tool if they have one. Does SMART show anything bad especially high reallocated sector count?

7 more replies
Relevance 61.09%

Hello, i just registered to this forum. I upgraded my hardware from AMD AM2+ platform to AMD AM3+, so basicly i changed my motherboard and memory( Asus M5A9, kingston 1333 4x4Gb), everything else is the same - CPU- AMD Phenom X6 1055, GPU- Gigabyte HD5830, OLD HDD (more than 3 years im sure, mb 5years) Seagate Sata 500GB. My previous system which was Gigabyte AM2+ MA790GX+Apacer 800mhz 8Gb DDR2 was fine and no BSODs ever.
Oh and becouse i have an IDE dvd and cdrom devices i bought PCI/ide adapter. Havent put the driver for it yet .

The thing is that i use the old OS, ussualy i do backup of my data and put it on an external HDD and than i format the HDD and put the fresh OS with all the drivers. So i feal that it might be of a drivers conflict of somesort, ive researched forums and ppl say that mb increase the voltage for the memory becouse all slots are filled but i never touched the voltage settings so i dont know how the memory voltage even called .
Ive done tests i did use OCCT linpack for 30 mins and it was stable and fine, use my 3d graphics app's to fill all the ram and under huge lag it still worked fine and no BSOD after.
BSOD happened id say more in idle times: surfing the web in google chrome i had few unusual messages about something cannot allocate memory 3 times in 2 mins and than finaly BSOD'd. Second time i had a strange issue - no sound again after 8-10 hours of fine work, i clicked on realtek driver and it said failed to :something: the device and in... Read more

Answer:BSOD BugCheck 1000007E occurs time to time (not under load), need help

  
Quote: Originally Posted by MasterChief89


Hello, i just registered to this forum. I upgraded my hardware from AMD AM2+ platform to AMD AM3+, so basicly i changed my motherboard and memory( Asus M5A9, kingston 1333 4x4Gb), everything else is the same - CPU- AMD Phenom X6 1055, GPU- Gigabyte HD5830, OLD HDD (more than 3 years im sure, mb 5years) Seagate Sata 500GB. My previous system which was Gigabyte AM2+ MA790GX+Apacer 800mhz 8Gb DDR2 was fine and no BSODs ever.
Oh and becouse i have an IDE dvd and cdrom devices i bought PCI/ide adapter. Havent put the driver for it yet .

The thing is that i use the old OS, ussualy i do backup of my data and put it on an external HDD and than i format the HDD and put the fresh OS with all the drivers. So i feal that it might be of a drivers conflict of somesort, ive researched forums and ppl say that mb increase the voltage for the memory becouse all slots are filled but i never touched the voltage settings so i dont know how the memory voltage even called .
Ive done tests i did use OCCT linpack for 30 mins and it was stable and fine, use my 3d graphics app's to fill all the ram and under huge lag it still worked fine and no BSOD after.
BSOD happened id say more in idle times: surfing the web in google chrome i had few unusual messages about something cannot allocate memory 3 times in 2 mins and than finaly BSOD'd. Second time i had a strange issue - no sound again after 8-10 hours of fine work, i cli... Read more

3 more replies
Relevance 61.09%

Hi everyone,

I know that thread title may not be clear enough though it is exactly related to the issue I have.

Context
The issue I'm facing lasts since years and I tried everything I could from what I gathered online to tackle it.
I used :
2 different computers (one Dell, one PackarBell)
3 different TV Tuner (2 dual, 1 single, all HD, 1 PCi and another PCI-e, 1 USB external)
Win7 x64 or x86
Clean installation or long run installation
With or without third party related software (Kodi, Win7MCServer, etc)
And I could go on like this for a long time to show how much this issue is lasting and I can't fix it. Of course, as it has been years, you could tell I have moved from houses to flats in the meantime and thus local installation doesn't seem to be part of the issue.

I checked the parameters linked to process startup, sleep mode, hardware setup and energy consumption modes, etc.
The issue
From time to time, the TV Tuner(s) in Win7MC will be advised as unavailable or signal said lost.
The fix
Most of the time I only need to run a channel scan, even interrupt it after 1% done, and go back to live TV to have it working again.
At worst reboot is necessary and even worst a brand new channel cleanup+scan.

My question
One could say that, as I already have "fixes" I could get along with it.Thing is when recordings are scheduled and do not kick in (while at night and sleeping or away from home) it is quite annoying to see when back on the HTPC that nothing happened si... Read more

More replies
Relevance 61.09%

Hello:

Each time I turn on my computer and as it is boots up it will delay for a time with a line that reads something like ...Automatic IDE Configuration.... and then a message that my date and time are incorrect. The date goes back to Nov. 2003. Once I correct the date, time and year things seem to perform ok. Any suggestions on how to correct this problem would be appreciated. Thanks in advance.
 

Answer:Computer date, time and year change each time I boot up

6 more replies
Relevance 61.09%

I have a 4 year old computer that runs perfectly, except when I turn it off at night and then back on the next day, I loose a few hours on the time date at bottom of screen. I ajust each time I use it but the same thing happens each time I turn it off. Could it be the clock battery or ? My operating system is Windows XP Home
Thanks Lc
 

Answer:Windows XP time/date clock looses time after shut down.

Welcome to TSG...A bad CMOS battery will cause your machine to lose time. If the system is four years old, you're eligible for that issue...also, if the system has spent any lengthy amount of time (weeks or more) unplugged from AC power, it's more likely to happen.

Next reboot (after leaving it overnight), enter BIOS (setup) and see if the time there is slipping as well.

The battery itself (if that's what's bad) is cheap to replace...less than five bucks.

Please give us some specs on the hardware-make, model, etc.-and we can help you with battery replacement instructions.
 

3 more replies
Relevance 61.09%

So I recently have had the problem of my computers cpu spiking, I looked at some things and monitored the task manager/process explorer and saw that services.exe, Mcshield.exe, svchost.exe and sometimes even chrome, but this only started yesterday and I have had this computer for around 3 years now. Anything that would help me solve this problem would be greatly appreciated, because I am stumped.

Answer:CPU Spiking, causing freezing and choppy audio from time to time.

Welcome aboard   Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2. SecurityCheck may produce some false warning(s), so leave the results reading to me.NOTE 3. If you receive UNSUPPORTED OPERATING SYSTEM! ABORTED! message restart computer and Security Check should run Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeList Restore PointsClick Go and post the result. Please download Malwarebytes Anti-Malware (MBAM) to your desktop.NOTE. If you already have MBAM 2.0 installed scr... Read more

7 more replies
Relevance 61.09%

Hi,

I just noticed the clock on my Windows 10 tablet is running noticeably slow.
Over the last few days I've seen wrong times and done a manual sync to the time server, which sets it right again.

Now, if I bring up the calendar display, it's clear that the seconds are counting up in something like 1.25 second intervals.

Has anyone seen anything like this before?

Answer:Windows time clock running slow, losing time.

Please see this thread for possible solutions: Clock "slows down", yet is able to manually sync correctly.

Note that the OP has still not been able to fix it but it would be worth checking with him.

5 more replies
Relevance 61.09%

Looking for a utility that will allow me to locate files created/modified/accessed using TIME from/to also...as i want to locate those related to a specific occurance. When using just date, I get hundreds of files so would like to isolate further.

Is anyone aware of any such program? Shareware might be ok depending on cost but free is preferred. THANKS!
 

Answer:Solved: Freeware to find files by date and TIME? Time is the key!

10 more replies
Relevance 61.09%

Hi everyone, recently I switched from my mini-itx board P8Z77-I to my old Z77A-GD65, since then I'm having stability issues.
My 2500k was stable at 1,32v, cooled by an H100i, my GPU is at @1200/1500, also tested and stable (7870xt), but now randomly the system hangs, with no bsod, mostly while gaming but also one time while I was using Chrome with a bunch of tabs opened, including YT; only one time I got a bsod, full report attached
Thanks in advance, Gabriel.

Answer:System Hang (mostly gaming, also 1 time using Chrome), 1 time BSOD

^up

1 more replies
Relevance 61.09%

i bought a y410 on thanksgiving. it has been giving problems since then. i gifted it to someone so till now i was not able to take it back. i got it back now so was wondering if still i can take it back to the lenovo workshop or is there a way to fix this problem.i have vista on my laptop (it came with vista home, i upgraded it to vista premium)problem(s); When I unlock the computer or start it the screen comes then blinks twice and then finally comes back. During this process sometimes the volume goes away and some times the mouse pointer is hung and it does not move. Very infrequently the wireless is gone too. i have tried to get all the latest drivers from the lenovo site. Whenever something goes down and i see it in the device manager it shows the device is working properly. if you run the speaker test it says everything is working correctly and i can see the volume bar going up and down. even if i connect a external speaker this thing does not work. For mouse hanging if i re-start the computer it comes back up almost everytime but there is no such guarantee for the volume. Same for screen it always blinks no matter what. What should i do to solve this. i am very frustrated with this product to the verge that i am going to suggest this to social aliases in my company to stay away from lenovo if i do not get this fixed in the next one or two weeks. any one else seen this and know how to fix this?? thanks for help Abhi

Answer:screen blinks, speaker is off from time to time and sometimes mouse hangs

Hi, Even I am facing the similar issue since I brought Y410. Whenever I unlock system from sleep mode, Its always hangs and neither keyboard nor mouse works. So I need to restart my laptop everytime. It happened in 90% of cases. I am occasionally lucky to see my laptop recovered from sleep mode. Please help me. My configuration is Intel Core2 Duo CPU [email protected] Ghz , 2 GB RAM and 120 GB HDD and Windows Vista home Premium edition OS. Thanks in advance, Regards, Jagjit 

1 more replies
Relevance 61.09%

When I boot my computer, it freezes with a blank, black screen. This happens after the black Windows XP loading screen appears. At this point I have to turn off the computer manually by pressing the on/off button and then try again. It comes up with the screen asking for Safe Mode/With Networking/Last Known Good Configuration etc. The computer usually always works and loads perfectly after this (I have tried both Last Known Good Configuration and Start Windows Normally several times, but I still get the same problem. I don't know why my computer never works the first time but usually works the second or third time, after I turn it off. By the way, this problem also occurs when I restart the computer.Hope this is enough information and that you can help me. Thanks.BTW my computer:Dell Dimension 5150 Pentium 4 HT1GB Ram hope this is enoughI'm new to this forum thing... but I know a fair deal about computers (I think!)

Answer:Computer Freezes During Startup 1st time. Works 2nd/3rd time after turning off.

ok when did this start??have you made any changes to the computer?? hardware software?what protections do you have? antivirus anti-spyware etc.unlovedwarrior

7 more replies
Relevance 61.09%

While running that Combo Fix tool (I think that's what it's called), my time was switched to military time, and my date was switched to day/month/year. How do I switch it back?

Answer:[SOLVED] Military time (05 00, for example) and switching back to normal time...

Go to control panel then regional and language options and you will find all you need in there.

2 more replies
Relevance 61.09%

I have quite a conundrum. My Outlook calendar is set to a start time of 7am to and end time of 3pm Monday through Friday. I have turned on auto accept meetings and turned on auto decline conflicting meetings. This all works great. It has declined and added new meetings and all is working wonderfully.... EXCEPT one MAJOR issue.

The auto accept accepts during times that are not my standard work hours. If I set a start time of 7am and an end time of 3pm why is my Outlook accepting meetings at 12pm and 8pm and on weekends?
 

Answer:Outlook 2007 autoaccept meeting only during start time to end time.

*bump* still can't find a solution.
 

2 more replies
Relevance 61.09%

hello!

most of the time i am using my toshiba satellite pro m30 without the battery with energy from power supply system. the battery is stored somewhere outside the computer since one month the real time clock shows a wrong time, if the computer is started after a while.

i think my cmos-battery will die soon.

has someone an idea, how this cmos-battery can be changed by myself?

thanks
reinhard

Answer:Satellite Pro M30 - real time clock shows a wrong time

Hi Reinhard

I agree with you. It is time to replace CMOS battery. It is not easy and the unit must be disassembled. If you are not familiar with disassembling procedure it can be dangerous. A small mistake can result with hardware damaging.

If you want to do it alone you will do it on your own risk. Be sure that you use the right battery. Maybe you will not believe me but if you use wrong battery it could cause the battery explosion or other damage.

I am not 100% sure but the RTC battery must be placed on the left side near the touch pad. If you want to make it alone please be very gently. The notebook parts are very sensible.

1 more replies
Relevance 61.09%

The malicious program also corrupts most of the files I download, things like CCcleaner and ComboFix can't be run as a result of that corruption. At the first stages of the infection, i noticed from various kaspersky activity logs of the malicious .dlls (\system32\poveyawi.dll, ~lazogiya.dl, ~sidenohe.dll, ~feyimupa.dll, ~lisepeyo.dll, ~samotaso.dll) that the infection began from my internet browser's temp folder, then spread. When I remove these dlls from my registry and they are re-entered within a few seconds. Initially i was directed to one of those fake anti-virus sites and asked to download an antivirus program, here are the entries before I deleted them successfully;

O1 - Hosts: 82.98.235.133 browser-security.microsoft.com
O1 - Hosts: 82.98.235.133 url.adtrgt.com
O1 - Hosts: 82.98.235.133 best-click-scanner.info
O1 - Hosts: 82.98.235.133 antivirus-xp-pro-2009.com
O1 - Hosts: 82.98.235.133 microsoft.infosecuritycenter.com
O1 - Hosts: 82.98.235.133 microsoft.softwaresecurityhelp.com
O1 - Hosts: 82.98.235.133 onlinenotifyq.net
O1 - Hosts: 82.98.235.133 antivirusxp-pro-2009.com
O1 - Hosts: 82.98.235.133 microsoft.browser-security-center.com

Some websites have recently become unreachable (the window just stays blank), and java is not working properly so that may be the cause of that. Obviously my windows startup is taking longer as well.

the SCxxx.exe's running are secure connect programs (or whatever they are called) required for access to my network.

Any he... Read more

Answer:Trojan attempts to inject into all processes (every time, all the time they load)

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.comDDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Follow the instructio... Read more

2 more replies
Relevance 61.09%

Hello!

I have a small problem with my Portege M400 Tablet PC. The laptop is working great most of the time. Unfortunately, from time to time, the screen just turns black - or to be more specific, the screen doesn't come up again. In most cases, the screen was switched off by my power saving profile and when I try to get the screen back on (e.g. by moving the cursor or pressing a key, just as usual), the screen remains black. I can see that the computer is running and I can e.g. hibernate the computer, but even after waking up, the screen is still black. It also doesn't help to change the power profile or the output or anything - the screen just remains like this until I reboot the computer.

I have the new bios 1.80 (because of the better fan control) and I updated the Intel chipset drivers already (I had the problem before, so it is not the update of the drivers). Any idea what it could be, maybe the bios (this was the first thing I've installed after buying the laptop as I knew before the fan will be very loud otherwise).

Regards

Alex

Answer:Portege M400: Screen turns black from time to time

Hello Alex

I have found interesting Microsoft article about this issue. Please check it under http://support.microsoft.com/kb/917332/en-us

Obviously you must install Windows XP KB917332 on your unit. This should help.

Good luck!

1 more replies
Relevance 61.09%

Hello everyone,

For the second time within the past two weeks I've had quite an annoying problem regarding my left mouse button on my synaptics pointing device, all of a sudden the left mouse button will stop working. The right mouse button and the rest of the touchpad will work apart from being able to click the LMB function. I've had this happen once before quite a few months ago but thought nothing of it at the time. This occurs for around half a minute to sometimes a minute before returning to normal and being able to use the LMB. I am using a Lenovo Z580 if that is any help to anyone.

I have tried searching around the internet for any information regarding this problem but I have not been able to find any solution or information connected to my issue.

Thank you in advance!

Answer:Left Mouse Button - Stops working from time to time.

Hello LO mate when you click the button do you hear an audible click from inside the mouse it could be something as simple as a stuck micro switch.

Also if it is a wired one check the USB contacts too - in the plug and socket. You can clean them gently with a strip (about 5 mm with the corners rounded off) of old credit card with some lint free cloth around the end of it moistened very lightly with some alcohol

By the way just how old is the mouse?

3 more replies
Relevance 61.09%

Hi, this is my first post here and I could really use some help.

at some point in time while trying to de-spyware my laptop, it stopped running and reboot itself. When it got to the logon window it gave me no option to login, just a blue screen with the windows xp logo:


any ideas how to get around this? thanks!
-Jason

Answer:long time viewer, first time poster. XP startup problem...

Hello Jason and Welcome to TSF

Sorry to hear about your situation. What program were you using to clean out the spyware?

Can you boot into Safe Mode ? (By repeatedly tapping the F8 key until the menu appears)

4 more replies
Relevance 61.09%

Hello,

I have a Satellite U200 and under Vista flashcards crashes from time to time. Anybody else with this problem? It is starting to get on my nerves now...

Answer:Flashcard crashes from time to time under Vista with a Satellite U200

what kind of flash card? sd/memory stick? and what do you mean by crashes? does windows crash with a blue screen, or does it error in explorer?

4 more replies
Relevance 61.09%

Hello all,

I have a rather strange problem, from the past 5-6 days, I noticed that whenever I click any icon on the desktop /start menu, my machine just sits there, uses all the resources and after about 90s-120s launches the application. The application works fine without any problem though as it used to. When I launch the same application from the Program Files folder, the application launches very quickly without any problem and without hanging the machine.

Also, it takes very long only when the bare application is clicked, to elaborate, if i click on file.txt on the desktop, it opens in notepad without any problem, if i click on Notepad icon to launch Notepad, thats when the system freezes as mentioned above. This is similar for all applications, I can launch a .fla file from the desktop and it will launch pretty quickly in flash, but if I launch the flash program by double clicking on the icon on the desktop, then I can go have breakfast before i get control of my machine :D

The strange part is that almost all of the applications have this problem of freezing the machine when the icon on the desktop is used to launch the pogram, but only IE launches quickly without any problem.

I use kaspersky anti virus and scanned the machine, did a root kit scan on my machine and nothing came up. I scanned the machine with Malaware's Anti-Malware too and nothing came up. I am not an expert but I ran a HJT scan, and glanced through it, there were no entries that were spurios.
... Read more

Answer:Applications When Launched From Desktop Take A Very Long Time And Use All Resources In That Time

Hello jacksnake,

Have you performed a disk cleanup and a defrag of the system?

12 more replies
Relevance 61.09%

I travel to Colorado from Texas frequently. The last three times I have made the trip, at some point when I change times zones, my 640XL displays a time that is 15 minutes faster than actual time. When this happens, it also will not automatically check emails so that I have to do it manually. The only solution I have found so far is to completely reset the phone and start over as if it is a new phone, uploading everything manually. This takes me a day. Anyone else experience this problem? Other solutions would be appreciated!

More replies
Relevance 61.09%

Hello, While I work with battery, my T410 screen is suddenly dimmed for several seconds and then it lights as before. This happened every ~10 minutes. What is the problem? Regards,Uriel

Answer:T410 - The screen is dimmed from time to time, while working on batteries

See if http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/W530-display-brigtness-changes/m-p/888681#M337... solves the problem.

3 more replies
Relevance 61.09%

Dear all,

I spilt some water on my laptop a few days ago but fortunately it's completely dried out and working perfectly.... apart from this minor (but important) issue. I would appreciate your help.

Problem: the system time does not stay correct. Even after manually updating the BIOS time and also even after manually syncing it with the various servers available under the time options.

Fix: set the internet time sync interval to every minute rather than its default setting? How do I do this?

Much appreciated.

P.S. This couldn't be a CMOS battery issue surely because even when the system is on and plugged in the system time still deviates from correct. (I assume the CMOS battery is only used when the system is powered off.) If I need it replaced, how does that sit with my Dell hardware warranty?

Answer:System Time not kept correctly after having manually changed BIOS time

  
Quote: Originally Posted by dell1545


Dear all,

I spilt some water on my laptop a few days ago but fortunately it's completely dried out and working perfectly.... apart from this minor (but important) issue. I would appreciate your help.

Problem: the system time does not stay correct. Even after manually updating the BIOS time and also even after manually syncing it with the various servers available under the time options.

Fix: set the internet time sync interval to every minute rather than its default setting? How do I do this?

Much appreciated.

P.S. This couldn't be a CMOS battery issue surely because even when the system is on and plugged in the system time still deviates from correct. (I assume the CMOS battery is only used when the system is powered off.) If I need it replaced, how does that sit with my Dell hardware warranty?


For right now, lets just try to update your time. To do this, click on the clock in the bottom right. Then, click on change date and time settings. In the window that comes up, go to the top and click on the tab titled Internet Time. Then, click on change settings. Click on update now in the windows that pops up.

9 more replies
Relevance 61.09%

Hello,

I have problem with my laptop.
From time to time the display dimmed for a few seconds and restore again.
It does not matter laptop runs on batterie or is plugged.

Can somebody give me an advise?

Answer:Satellite R630-144: From time to time display dimmed for a few seconds

Hi

Theoretically it could be only a software issue; for example display driver starts to do some strange things? in such case I would recommend updating or reinstalling the display driver to check if this could helps?

But it could be also an hardware problem; FL-inverter
FL inverter is a small part which controls the backlight so theoretically it could be also an FL inverter malfunction? but this is just my guess
This should be checked by an technician to get more info.

1 more replies
Relevance 61.09%

Hi,I need to calculate the difference in working days / hours between 2 date / time stamps.Some simple example data which spans a weekend.01/07/2016 18:0004/07/2016 09:30(Working hours are 08:30-17:00 Monday - Friday)In this example the first date / time stamp is when an email was recieved (out of hours) and the second is when the email was replied to (1 hour into workiing hours) So the formula should return 00:01:00:00 (dd:hh:mm:ss)Thank you for your help!!

Answer:Calculating working time between 2 date/time stamps in Excel

It's a rather lengthy formula and needs explanation, so see here:http://www.cpearson.com/excel/DateT...If you have further questions, please ask.MIKEhttp://www.skeptic.com/

14 more replies
Relevance 61.09%

On the web there has been some fair amount of reporting that the P100 time clock fails to keep correct time.
Mine has been doing this for some months now.

I have tried all of the online recommendations like bios update, etc with no luck and then also to change the RTC battery.
I disassembled the laptop, (very easy when using the instructions from 'www.irisvista.com') , however I found it impossible to purchase a new battery ( battery 'green with plug in leads and marked 0706).

I unplugged the battery for a couple of minutes and then plugged it back in, then re-assembled the laptop so I could use it until I could perhaps find a new battery.

HOWEVER, the time clock now works perfectly.

I remember reading on another post somewhere that temporariliy uplugging the battery fixes the problem, AND IT DOES.
If this happens again I will extend the RTC battery wires out to an easy access area under a cover where I can unplug and replug the battery in a minute or so.

Answer:Satellite Pro P100 time clock fails to keep correct time

Hi

Thanks for this info buddy.
I have also read the thread about the P100 and time clock issue.
Someone said that the ASP technician removed the CMOS battery and plugged it again.
This helped!

PS: I would not recommend disassembling the notebook even if you have found some guidelines in the internet? in my opinion the risk of damage is too high. However, it?s just my personal opinion?.

Greetings mate

2 more replies
Relevance 60.68%

I have a problem appears from time to time. it's started after I used torrent to download. I get the blue screen , windows dumps some memory into a file and I get the following error report after it restarts:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 7a
BCP1: C0415718
BCP2: C000000E
BCP3: 148EF860
BCP4: 82AE31AF
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\100711-18018-01.dmp
C:\Users\User\AppData\Local\Temp\WER-35958-0.sysdata.xml
and sometimes appears error with this code
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: f4
BCP1: 00000003
BCP2: 87BCB598
BCP3: 87BCB704
BCP4: 82A25D60
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\100411-28392-01.dmp
C:\Users\User\AppData\Local\Temp\WER-49218-0.sysdata.xml

Laptop Sony Vaio
Model VGN-CR11GH_B
Windows 7 Starter 32bit (6.1,Build 7601)
CPU Intel core2 Duo T7100 @ 1.80GHz(2CPUs)
2GB RAM
DirectX 11

I tried to restore my system but it didn't work
Attachment 178362
Attachment 178363

Answer:BSOD appears from time to time after I download using torrent

  
Quote: Originally Posted by doody


I have a problem appears from time to time. it's started after I used torrent to download. I get the blue screen , windows dumps some memory into a file and I get the following error report after it restarts:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 7a
BCP1: C0415718
BCP2: C000000E
BCP3: 148EF860
BCP4: 82AE31AF
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\100711-18018-01.dmp
C:\Users\User\AppData\Local\Temp\WER-35958-0.sysdata.xml
and sometimes appears error with this code
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: f4
BCP1: 00000003
BCP2: 87BCB598
BCP3: 87BCB704
BCP4: 82A25D60
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\100411-28392-01.dmp
C:\Users\User\AppData\Local\Temp\WER-49218-0.sysdata.xml

Laptop Sony Vaio
Model VGN-CR11GH_B
Windows 7 Starter 32bit (6.1,Build 7601)
CPU Intel core2 Duo T7100 @ 1.80GHz(2CPUs)
2GB RAM
DirectX 11

I tried to restore my system but it didn't work
Attachment 178362
Attachment 178363



No DMP's included in upload. Please try this method.

W... Read more

1 more replies
Relevance 60.68%

what causes my laptop to hang and slows in opening 

More replies
Relevance 60.68%

I have an Excel cell (general format) with the number 7.40 in it. It's supposed to mean 7 hours, 40 minutes. I need to multiply what 7.40 really means (7.67 hours) by a rate for another cell total. How do I convert the 7.40 to 7.67? (I realize I could just change the 7.40 to 7.67, but I'm being simplistic - there are thousands of cells with the data entered this awful hh.mm way.)

Answer:Convert number to time to decimal time in Excel

The trailing zeros are the main problem, as Excel will drop them, so 7.40 becomes 7.4Here is a work around.With your numbers in column Ain column B enter the formula: =TEXT(A1,"00.00")which will convert your number to text and retain any trailing zerosYour column B should look like: 07.40Next, in column C enter the formula: =TIME(LEFT(B1,2),RIGHT(B1,LEN(B1)-FIND(".",B1)),)*24Which will now convert your text string back into a time and by multiplying by 24 get your decimal number.See how that works.MIKEhttp://www.skeptic.com/

4 more replies
Relevance 60.68%

Hi folks I have done as much research as I possibly could before resorting to using a forum but at this point I've hit a wall. I was experiencing BSOD after about a half hour of use of my PC guaranteed the BSOD is a driver power state failure. I updated all my drivers thinking that would fix my problem unfortunately it did not it continued for a few days. I use my laptop for work so I decided to restore to system defaults. It seemed to be working fine after that until I was downloading windows updates and I blue screened same message appears Driver Power State Failure. After I reboot updating windows through the updater fails everytime. So I just restored my PC to factory once more. (BSOD once during the downloading of factory software) Anyways here is the debug file. Thanks ahead of time for looking.

Answer:BSOD all the time. Time to take to blue sceen anywhere from 30 mins+

Welcome.


Code:
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\YUSRA\Downloads\Compressed\debug-BenaiahPC.zip\031215-24882-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c3c0?

************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Machine Name:
Kernel base = 0xfffff800`02c10000 PsLoadedModuleList = 0xfffff800`02e54650
Debug session time: Fri Mar 13 03:05:33.547 2015 (UTC + 6:00)
System Uptime: 0 days 0:11:51.796
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

..............................................................
................................................................
.........................
Loading User Symbols
Loading unloaded mod... Read more

1 more replies
Relevance 60.68%

I got a Lumia 550 the other day and I noticed that the screensaver time and date is always on. When I lock the screen , it appears and stays there , always on , using battery and ******* me off.
Does anyone knows how to make it go away?
I've tried to find settings for that but failed so far.
Gods of Windows , you are my only hope !

Answer:Why my Lumia 550 showes the time , all the time? Even when screen locked.

Originally Posted by Windows Central Question I got a Lumia 550 the other day and I noticed that the screensaver time and date is always on. When I lock the screen , it appears and stays there , always on , using battery and ******* me off.
Does anyone knows how to make it go away?
I've tried to find settings for that but failed so far.
Gods of Windows , you are my only hope ! Do you mean glance screen?

more replies
Relevance 60.68%

ASUS CM6870 with Realtek ALC892 8-channel sound
i5-3570
Nvidia Geforce GT 620
8GB Memory

Windows 7 x64 with all updated drivers.

After reinstalling Windows 7 from scratch start getting distorted sound (like a crack sound) from time to time.
This happens with different regularity (sometimes very seldom, sometimes often, sometimes constantly).
This happens in video players(Windows Media Player, MPC-HCx64, VLC) as well as in the browser when watching flash or html5 videos. This happens with different video containers, video codecs and audio codecs. Never happened with system sounds. Installed the newest K-Lite codec pack. Did not help.

Any ideas?
Thank you

Answer:Distorted sound from time to time system wide.

Run the free DPC Latency Checker and for more in depth analysis run the free Resplendence Latency Mon.

Sounds like a Latency problem.
DPC Latency Checker

Resplendence Software - Advanced System Tools and Developer Components

2 more replies
Relevance 60.68%

Hi all,the time on my newly purchased yoga p40 runs faster than the actual time. I did change the settings to "update time automatically through internet", but this does not work. Every day the clock on the laptop runs around 10-15 minutes faster than the real time. please help,thanks 

More replies
Relevance 60.68%

Hi all,the time on my newly purchased yoga p40 runs faster than the actual time. I did change the settings to "update time automatically through internet", but this does not work. Every day the clock on the laptop runs around 10-15 minutes faster than the real time. please help,thanks 

Answer:Yoga p40 - Time runs faster than actual time

Hi there, Fabriceknecht -  
 
Thank you for writing in to the Lenovo Forum - happy to have you here today.
 
I would suggest looking at your notebook BIOS page, check to make sure the clock date and time is accurate.  Also - check for updated BIOS files, then flash to newer BIOS if present. Most of the time this can work to resolve this issue, if nothing helps, it may need to be sent to a service center for hardware replacement.
 
Update us how it goes.
 
 
 
 
Regards,
 
Tap that kudos button if I helped  If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

1 more replies
Relevance 60.68%

From time to time my Bluetooth mouse (Microsoft Bluetooth Notebook Mouse 5000) stops working.I have to either move the mouse around a lot or power cycle it to get it working again.The problem is not in the mouse, which works fine with other computers.





Hope that helps,JohnThinkPad T420s [ i7-2640M | 16GB | 1TB SSD | 1600x900 | 802.11n | BT | Cam | FR | Win8.1Pro64 ]









Solved!

Go to Solution.

Answer:Bluetooth mouse stops working from time to time (X...

JNavas wrote:From time to time my Bluetooth mouse (Microsoft Bluetooth Notebook Mouse 5000) stops working.I have to either move the mouse around a lot or power cycle it to get it working again.The problem is not in the mouse, which works fine with other computers.Problem solved by unchecking "Allow the computer to turn off this device to save power" in Device Manager > Bluetooth Radios > ThinkPad Bluetooth 3.0 > Properties > Power Management.





Hope that helps,JohnThinkPad T420s [ i7-2640M | 16GB | 1TB SSD | 1600x900 | 802.11n | BT | Cam | FR | Win8.1Pro64 ]

9 more replies
Relevance 60.68%

Steps taken:

-Fresh install (From factory recovery partition) of windows 7, fully updated and drivers installed.

-CMOS Battery Replaced (&Tested with voltmeter)

-Bios Flashed & updated

-windows time service is disabled via services.msc

-"synchronize with timer server" unchecked in advanced time settings.

Further information

BIOS time resets to 01/01/2009 00:00:00 when windows time is updated/changed manually. If windows time is not changed manually, bios time remains accurate.

Upon restart after windows time change, and directly entering bios, the date and time aboved is what the bios time is set to.

Recurring problem

Answer:BIOS Time Resets if and only if windows time is changed

Hope someone has a better idea, but the first thing I thought of is damage occurred when flashing the bios. I recommend not doing that merely as an update unless a problem is present.

3 more replies
Relevance 60.68%

Hello there,
Im having a few difficulties understanding why I can be perfectly online, using MSN, email-client, and other internet-based activities (meaning the connection is allright), but when it comes to using Win Internet Explorer, very often it just says something like Internet Exlorer cannot show the selected page.

This happens when trying to open anything from Google.com to Yahoo

I havent got a clue what it could be - maybe malware I dont know, but have run several tests and it seems to be ok..

Any surgestions to further presedure???


THX
 

Answer:Being online, I can not acces Internet Explore (From time to time)

I've moved your thread to software as that is more than likely the venue for this...

Have you tried a different browser (like FireFox) to see if that gives some clue as to the problem?
 

6 more replies
Relevance 60.68%

Hello. Lately I've purchased Acer Aspire E5-571G and everything is fine, but I heard something bad from my speakers.When I use youtube or application with music or sound effects I heard that sound freezes. The sound is still emitting, but it stutters. It happens not that often, but I'm getting quite irritating. There's no speakers' thing I guess, because the problem appears on headphones too. My laptop isn't overheated, it happens when I use light game or browser.I've installed new drivers for chipset and Realtek. That changed nothing I guess.Any idea how to fix that? Thanks for your help.

Answer:Sound crashes/buzzes/stutters from time to time

Installed OS? any antivirus installed? usually sound stutters happens when CPU or chipset are under heavy load, so can be HDD scanning or other applications that's working in the background.

7 more replies
Relevance 60.68%

Hi to all.
I m here again with a problem which I facing since long. when I start computer and launch FF. it takes too much time. no more then at least 50 sec to 1 minute. after start first time, if I close FF and start it again its its launch quickly. and the most funny thing is which is wonder me alot that FF itself know that and often after start FF, its says in status bar of FF that "FF taking too much time to start, to solve this problem follow the steps" (or something like that)
and FF suggest Reset firefox from FF button->Help->troubleshoot problem->reset firefox.
but this method did not solve the problem. FF updated regularly when new update available and the current version is,,,,,, 27.01.
my pc specs is in this forum.

Answer:FireFox taking too much time to launch first time after start pc.

Hi,

Have a look here:

https://support.mozilla.org/en-US/kb...refox-problems

Try disabling all plugins on a temporary basis and see if Firefox starts faster.

Before trying to reinstall Firefox - backup your Firefox profile using:

MozBackup - Backup tool for Firefox and Thunderbird

Run the program and backup your current profile and save it as a .pcv file somewhere handy.

Then fully remove Firefox and either reboot or run a system cleaning product.

Reinstall Firefox and see if it boots faster. If it doesn't - it's not a problem with Firefox.

If it's okay - run MozBackup again and use it to restore the profile that you saved earlier.

Start Firefox.

8 more replies