Computer Support Forum

Lenovo Ideapad 100 USB (Device Descriptor Request ...

Question: Lenovo Ideapad 100 USB (Device Descriptor Request ...

After installing window on my laptop (Lenovo Ideapad 100) found out that the USB port are not working although if i plug in a phone it indictaed charging and i plug in my hard drive it shows the led light but the USB cant read any device not even a USB mouse works on the system . Please kindly help me with this error.

























Screenshot (6).png ?101 KB

More replies
Relevance 100%
Preferred Solution: Lenovo Ideapad 100 USB (Device Descriptor Request ...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 94.71%

I upgraded to Windows 10 a while back. Every time I open the computer I get a pop-up notification telling me the USB device is unrecognized. I have no USB devices in any of my 3 USB ports.
I sent my computer in twice. No help. They just uninstalled everything and reinstalled everything and told me it should be fixed. It is not. I then went about updating every driver in my Device Manager. I uninstalled the Unknown USB Device and then updated
other drivers. Certain drivers (such as PCI Express Root Port #3 - 9C14) when updating would also reinstall the Unknown USB Device, which I would then uninstall and keep working down the list. At the end of updating EVERYTHING I scanned for hardware changes
and "found" the Unknown USB Device. 
From what I can tell, and I know very little about this stuff, my computer can't name one of my USB ports. Since it can't figure out what it's called it can't download the proper driver for it. Since it can't download the proper driver it can't work properly.
The practical result from this is that one of my three USB ports does nothing when I put in any USB item (connect my android phone, thumb drive, presentation clicker, etc).
I've looked on tons of forums. My current thought is that if I can tell my computer what the deice is or download the right driver and tell my computer to use that driver for this device it should solve my issue. But I don't know how to know what the name
of the USB port should be (I imagine it woul... Read more

More replies
Relevance 93.07%

hello guys in my device manager there is a yellow triangle on a usb device driver saying : a request for device descriptor request failed first i thought maybe 1 of my us ports not working but when i tested all ports are working even card reader but the error is still there i updated drivers (chipset - etc) but it didnt help so i want to know how to get rid of that error and what is the problem with my laptop?
note: sometimes when i trun on my laptop that error is gone mysteriously and most of the times its showing up
note: i recently changed my wireless adapter tho the orginial adapter was a bt/wifi combo but the new one is just a wifi adapter and i have an ssd installed instead of dvd optical drive and both are working well
note: things i already tried: disabling fast boot-updating generic usb drivers-taking out battery for 5 minutes-updating drivers

Answer:a request for device descriptor request failed

i recently changed my wireless adapter



Is this a USB adapter? Does the error go away if the adapter is removed? With the yellow flag in Device Manager, right click it and Uninstall it. Remove the USB Device from the computer end and Restart your computer. When the computer comes back up, plug the USB device into different USB port of the computer.

11 more replies
Relevance 93.07%

hello guys in my device manager there is a yellow triangle on a usb device driver saying : a request for device descriptor request failed first i thought maybe 1 of my us ports not working but when i tested all ports are working even card reader but the error is still there i updated drivers (chipset - etc) but it didnt help so i want to know how to get rid of that error and what is the problem with my laptop?
note: sometimes when i trun on my laptop that error is gone mysteriously and most of the times its showing up
note: i recently changed my wireless adapter tho the orginial adapter was a bt/wifi combo but the new one is just a wifi adapter and i have an ssd installed instead of dvd optical drive and both are working well
note: things i already tried: disabling fast boot-updating generic usb drivers-taking out battery for 5 minutes-updating drivers

More replies
Relevance 91.84%

Only bought Yoga 2 Pro for few days and start to have bluetooth issue where intermitten disconnection with my logitech M557 bluetooth mouse and now is totally failed with Unknown USB Device. Tried download and re-install new bluetooth driver from Lenovo Support Site but still shown as Unknown USB Device. Pls help!

Answer:Yoga 2 Pro Bluetooth - Unknown USB Device (Device Descriptor Request Failed)

Same issue,  been a problem since I purchased last Christmas.  Sometimes I want to throw this piece of crap out and buy a mac.  Lenovo, get your head out of your ass.

1 more replies
Relevance 91.84%

I was just working happily when my Microsoft Bluetooth Mouse just suddenly stopped working.
The Bluetooth settings page says "Bluetooth is turned off" and there are no options on the settings page or the system tray to turn Bluetooth on.
The Device Manager now has "Unknown USB device - device descriptor request failed" where it did not before.
Other devices all seem to be working fine - USB devices plugged in are being recognized and work properly. Only BT seems to be broken.
I've tried:
uninstalling the device and rebooting
installing the latest updated chipset drivers from the dell website
windows updates
pretty much all of the advice here: http ://troubleshooter.xyz/wiki/fix-usb-device-not-recognized-device-descriptor-request-failed

Any other ideas?
Thanks

Answer:XPS 15 9550 Bluetooth stopped working (Unknown USB device - device descriptor request failed)

So in desperation I just went into BIOS settings to see if there are any BT settings that may have become disabled. I didn't see any, and I didn't change any other settings.
After rebooting, BT and my mouse is now working again.
Something seems to be really flaky here, but hopefully this will help others with the same issue.

1 more replies
Relevance 91.84%

hey, im having problems with plugging in my mouse to any USB port, this just started around an hour ago. ive checked on the brand's website which carried no complaints on problems like this with the same mouse. tried pretty much everything, even looking
it up on youtube and forums... Nothing has worked, worser still, i got it for christmas and its stopped working, ive looked though the device manager too. Please try and help me, if u can. I use Razer Naga Waith Red if that helps

thanks,
onyx

Answer:Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor failed.

Hi onyx,
This error means a device driver notified the operating system that the device failed. This circumstance can occur if the device hardware fails or if the device driver fails.
Have you tried to update the device driver for test?
Please follow this guide trying t resolve this issue:
Code 43: Windows has stopped this device because it has reported problems
http://technet.microsoft.com/en-us/library/cc725873(v=ws.10).aspxKaren Hu
TechNet Community Support

2 more replies
Relevance 91.43%

Since a day or two I get this error in my Lenovo Solution center.I've tried to update the driver, but that failed.The G710 is running W8.1 Any solution available?best regards Piet.

Answer:G710 Unknown USB-device (Device Descriptor Request Failed)

Hi Piet_Bos,
 
Welcome to the Forums    
    
As per the query we understood that you are facing issue  with error in USB device in your Lenovo G710 laptop.
 

Unplug all USB peripherals connected on the machine
Run Windows Update to get the latest patch and bug fixes (reboot if necessary) and try the USB devices.

If still the issue persists then please follow the below steps:-

Go to start button right click on my computer.
Select properties in left upper corner you have 4 options select ?advance system settings? option.

3.System properties pop up comes under that select hardware option and select device installation settings and disable the auto driver download option and select save changes and restart the system.
 

Now try to update the driver and check for the issue.

Hope this helps. Do post back if the issue persists!                                                   
 
Best regards,                                              ... Read more

2 more replies
Relevance 91.43%

Hello, ok so after recently doing a clean install of windows 10(please don't get me started on that mess). my system has been plagued by random usb drops. it's where everything connected via USB suddenly disconnects then reconnects out of the blue. well I was using a Rosewill Transenclosure RX200R-APU-25B USB 3.0 dual 2.5 hard drive enclosure and transferring files from one drive to another (connected via USB) when one of these drops occurred. Now whenever I plug in my hard drive enclosure in a windows warning pops up and says "the USB drive that was just connected Malfunctioned and could not be installed" and in system manager it says "Unknown USB device (device descriptor request failed)". I know it's not the hard drives because I can remove them and use another connection and they work fine, all files intact. It's just now my hard drive enclosure won't recognize. This also happened to a "Loot crate exclusive Game of Thrones stark sigil 4GB USB stick I plugged in and turned into a windows 10 install drive. When I plugged it into use it after the windows media creator said it was done the USB stick was raw and unformatable. Please help. Microsoft keeps telling me it's a hardware issue even though it happened on two different systems. both operating windows 10 never any issue with windows 7 or 8.1

Dell N7110
i5-2450M about to upgraded to an i7-2820 if I can get this USB issue under contol
16GB Samsung DDR3 Ram
3-750GB HDD, 250GB HDD
EVGA GTX 1... Read more

Answer:Unkown USB device (device descriptor request failed) after disconnect

The driver could have been corrupted please re install the drivers for dell. Hope this helps

1 more replies
Relevance 91.43%

Hello, ok so after recently doing a clean install of windows 10(please don't get me started on that mess). my system has been plagued by random usb drops. it's where everything connected via USB suddenly disconnects then reconnects out of the blue. well I was using a Rosewill Transenclosure RX200R-APU-25B USB 3.0 dual 2.5 hard drive enclosure and transferring files from one drive to another (connected via USB) when one of these drops occurred. Now whenever I plug in my hard drive enclosure in a windows warning pops up and says "the USB drive that was just connected Malfunctioned and could not be installed" and in system manager it says "Unknown USB device (device descriptor request failed)". I know it's not the hard drives because I can remove them and use another connection and they work fine, all files intact. It's just now my hard drive enclosure won't recognize. This also happened to a "Loot crate exclusive Game of Thrones stark sigil 4GB USB stick I plugged in and turned into a windows 10 install drive. When I plugged it into use it after the windows media creator said it was done the USB stick was raw and unformatable. Please help. Microsoft keeps telling me it's a hardware issue even though it happened on two different systems. both operating windows 10 never any issue with windows 7 or 8.1

Dell N7110
i5-2450M about to upgraded to an i7-2820 if I can get this USB issue under contol
16GB Samsung DDR3 Ram
3-750GB HDD, 250GB HDD
EVGA GTX 1... Read more

Answer:Unkown USB device (device descriptor request failed) after disconnect

The driver could have been corrupted please re install the drivers for dell. Hope this helps

2 more replies
Relevance 90.61%

Hey
1.)So my mouse(Corsair Harpoon RGB) was recently just working fine until one night i unplugged it and put it into computer and on that computer it didnt work so i went back to my laptop to plug it in there, but it showed the same problem it didnt respond the logo didn't light up so i went to the device manager and it said *title. So how do i fix this is there something with my mouse is there something with my software?
Oh yea and on top of that i have 2 more issues that i jut can't solve by myself.

2.) Unknown USB-device(port reset failed)
3.)DVD Drive(optical drive) doesnt show up on the device manager but it sounds like it's working and it opens and closes.
4.)Front ports of my PC doesnt work if i plug an USB in it doesnt do anything (it does work perfectly in the back)

I don't know though if i should make more threads but they somewhat relate to each other,
that's why they are just in 1 thread. If you need to ask any question, need pictures , my specifications or anything else just ask me.
Thanks in advance!
Best regards Hao.
 

More replies
Relevance 90.61%

When my girlfriend connects external USB device to any of the USB ports on Windows 10 Home she gets message:
USB Device Not Recognized.
She can not charge USB device via USB port.
I went to device manager and under USB Controllers I see following:
Unknown USB Device ( Device Descriptor Request Failed).
I tried some tricks I googled for this message but none of them returned result.
She didn't get any of the drivers with this device which needs to charge.
What should I do to be able to charge this device via USB?

Answer:USB Device Not Recognized Device Descriptor Request Failed

Try the device on a different USB port. This will figure out if problem is caused by a broken port.
Connect the device to another PC. This will figure out if the external device has problem.

Open Device Manager and expand category Universal Serial Bus Controllers and locate the USB device which is not being recognized by Windows.

Right-click on the device and select Uninstall from the context menu.

After finishing the uninstallation, restart your PC then Windows will reinstall the device automatically.

The problem can be caused by faulty USB driver. In this case, updating driver would fix the problem.

Obtaining Hardware ID's to help Identify Hardware
- Go to Start and type in "devmgmt.msc" (without the quotes) and press Enter
- Expand the "Unknown USB Device" category by clicking on the + sign to the left of it
- Right click on the "Unknown device" (if there's more than one, do this for all of them) and select Properties.
- Then select the Details tab.
- In the dropdown box, select "Hardware IDs" - and match the info to one of the following descriptions:
- - If the Hardware IDs description contains VEN_ and DEV_, then let us know the 4 characters immediately after the VEN_ and the 4 characters immediately after the DEV_
this is a PCI device and we'll look up the information at http://www.pcidatabase.com
- - If the Hardware IDs description contains VID_ and PID_, then let us know the 4 characters immediately after the VID_ an... Read more

2 more replies
Relevance 90.61%

I know that a similar question has been asked before but, not with the last part of the message, (Device Descriptor Request Failed). I get this, in Device Manager, and I have searched for an answer on the net. Also it is a Code 43. I went through my laptop, with an HP Technician this morning, I might add at a cost of 5p/minute, for 30 odd minutes. He has said that because I had gone over to Windows 8.1 and the recovery discs I made will not load, to put back in Windows 8. I have to send the laptop back for re-installing the OS, because Windows 8.1 do not have the update for my problem. Also the R.H. USB socket has a failure ID:0GAPTK-6T7716-MFPWWK-8D1Q03. I personally think that this is all what the problem is. a duff USB. Is this a cop-out???
My question is; has anyone heard of Windows 8.1 having driver WHQL problems?? Very.

Any/all ideas, appreciated.

ps, I only found out the problem with the usb when I tried to download a Mobi file to a Kindle for my wife. The other usb's work OK.

Answer:Unknown USB Device (Device Descriptor Request Failed)

Is there only one USB port on the right hand side? Sometimes manufacturers connect internal devices via an unused USB port internally. USB ports are usually in groups of two, seeing only one port is usually a sign that the wiring has been redirected internally to something else like a Bluetooth adapter or wifi adapter. It may even be a card reader or touchpad. Is anything like that not working? If it is start looking for a driver for it.

19 more replies
Relevance 90.61%

I HAVE TRIED THE WAY THAT HAS BIN SUGGESTION WITH NO LUCK
\_SB.PCI0.OHC1.RHUB.PRT2- BIOS DEVICE NAME
PROVIDER-MICROSOFT
IF YOU NEED MORE INF JUST ASK
PLEASE HELP

More replies
Relevance 90.61%

I have had the Microsoft Wireless 2000 Keyboard and mouse for 10 months and it has been working fine. But recently when I plugged it in I got an error message which said :The last USB Device you connected to this computer malfunctioned. and Windows does
not recognize it.
I opened Devices and Printers and it said Unknown USB Device (Device Descriptor Request Failed).

Also it is on Windows 10 Home

More replies
Relevance 90.61%

Fresh install of Windows 10 and the last driver I need to sort out is the above.

I believe it is my powered USB 3 hub to which I plug in my keyboard and mouse. Technically it is working but I don't like seeing yellow triangles on devices.

So are there any fixes?

Answer:Unknown USB Device (device descriptor request failed)

If it's a generic USB 2.0 Powered Hub then technically there's should be no drivers needed by Windows, if it's a USB 3.0 Hub then I'm unsure (since I don't own any USB 3.0 Hubs).

Might be a Windows bug, basically Windows can't find the description information to display the Hub's name in the Device Manager example: Generic USB Hub, Root Hub Device, etc....

I'm pretty sure everything is working as should, you're good minus the minor annoyance if all device connected through the USB Hub is recognized by Windows; if you right click Properties on the yellow triangle it probably says "The Device is working properly".

9 more replies
Relevance 90.61%

Im running windows 10 on an HP laptop, 64 bit, and i just got a micro usb to usb device so i can transfer stuff onto my phone. It worked when i first got it but now it comes up with a Device Descriptor Request Failed and a Code 43 error. Ive tried updating
the drivers, restarting my laptop, and plugging it into different usb ports but it still comes up with the error. Any suggestions? 

More replies
Relevance 90.61%

After installing Windows 10 anniversary update, I get the following error in the device manger: Unknown USB Device (Device Descriptor Request Failed)

Tried uninstalling and restarting PC. Reinstalled Windows made from media tool. Nothing fixed it. Did a google search and nothing has worked. No USB drivers on the PC maker's website.

Any ideas?

Answer:Unknown USB Device (Device Descriptor Request Failed)

You can try going into device manager > select show hidden devices and delete all "inactive" usb device appearances. In my example below, there would be four. Once done, reboot and try your device again:

8 more replies
Relevance 90.61%

Fresh install of Windows 10 and the last driver I need to sort out is the above.

I believe it is my powered USB 3 hub to which I plug in my keyboard and mouse. Technically it is working but I don't like seeing yellow triangles on devices.

So are there any fixes?

Answer:Unknown USB Device (device descriptor request failed)

If it's a generic USB 2.0 Powered Hub then technically there's should be no drivers needed by Windows, if it's a USB 3.0 Hub then I'm unsure (since I don't own any USB 3.0 Hubs).

Might be a Windows bug, basically Windows can't find the description information to display the Hub's name in the Device Manager example: Generic USB Hub, Root Hub Device, etc....

I'm pretty sure everything is working as should, you're good minus the minor annoyance if all device connected through the USB Hub is recognized by Windows; if you right click Properties on the yellow triangle it probably says "The Device is working properly".

6 more replies
Relevance 90.61%

After i updated my Lenovo G580 20150 to Win 8.1 all 3 USB ports stopped working. Now i can't use any USB device (Mouse, Flash drive, portable HDD etc, all working on my other Win8 computers). Below are some screen shots for further information.Please help to resolve this issue.

Answer:Unknown USB device (Device Descriptor Request Failed)

hi kmugal,
 
Welcome to the Lenovo Forums
 
The issue that your having is most likely the one discussed in this article.
 
If you have tried the USB 3.0 (x2) and USB 2.0 (x1) ports with the same issue, consider the following:
1. Unplug all USB peripherals connected on the machine
2. Run Windows Update to get the latest patch and bug fixes (reboot if necessary) and try the USB devices.
 
If the problem remains, consider going back to Windows 8 by doing a Refresh or Reset to isolate any issues on the OS level.
 
 
Regards

1 more replies
Relevance 90.61%

Turned on phone and said to plug into computer with USB and open Hisuite.  Is it an app that i can download and also how do i get the computer to recognize the phone?

More replies
Relevance 90.61%

Can any help with this problem? Have a Pavilion G6 with no USB 3.0 as I am aware. USB (3 ports) not working.However, when the plugged the mobile, the mobile does get charged. Device Manager shows "Unknown USB Device (Device Descriptor Request Failed)".   Running Windows 10 64 bit. Tried everything like uninstalling, updating etc as the information on the internet. Also, updated the drivers using Driver Easy but still getting the error. Any suggests, please? Thanks in advance. Sanil Sukumaran.

More replies
Relevance 90.61%

I am running the Lenovo Ideapad y510p (the GT755m SLI version). I had my USB mouse and my flash drive connected to the 2x 3.0 USB ports (the ones on the left), everything was fine until suddenly both of them stopped working. When I try connecting the flash drive nothing happens, however, when I try connecting the USB mouse it says Unknown USB device (Device Descriptor Request Failed) in the device manager, windows error message "USB Device not recognized" also pops up in the bottom right corner. When I try connecting either of them (the mouse of the flash drive) to the 3rd USB port (the usb 2.0 port) they both work perfectly fine without any errors at all. I would like to know what may have caused that error and if there is any solution at all. Thanks in advance, Mersif.

Answer:Unknown USB device (Device Descriptor Request Failed)

Still looking for a solution.

3 more replies
Relevance 90.61%

Hello everyone,
i hope you can help me sorting out this issue that is causing me a hard headache at the moment.

I've bought this new Lenovo Z50-70 laptop with windows 8.1 preinstalled on it. Fresh new.

I'm trying to connect via usb a guitar audio interface (Line6 POD HD500) so i installed the drivers via the .exe setup file i downloaded from Line6's site.
The device worked fine on my previous HP pavilion with windows 7.

Now when i completed the installation, i connected it and i had this error:Windows has stopped this device because it has reported problems. (Code 43)A request for the USB device descriptor failed.
I used slimdrivers to update all the other drivers, in case it was a conflict causing the error.
I checked via command prompt with command "pnputil -e" and i saw a driver from the vendor of the device listed, so it is installed correctly i think.
I tried all USB ports i have, 3.0 and 2.0 on one side of laptop and 2.0 on other side.

When on device manager, if i click update drivers and choose the "let me pick from a list of device drivers.." i don't see the company name of the device.

i saw that another guy posted a really similar problem on SevenForum and he figured out how to force windows to use the drivers but he didn't post the solution.. Here is the post: Can't get Windows 7 x64 to use the drivers I've installed repeatedly Solved - Windows 7 Help Forums

Edit: the software tool from which i can update drivers and other things for my g... Read more

Answer:USB device not recognized. Device descriptor request faile

I am having the same exact problem as you, Cattanius. I couldn't get it to connect to my computer over 2 years ago and then just decided to try it the other day. I didn't expect anything to show up in device manager because I thought the usb port was fubar, but then I see the same message you got and all of the sudden there's hope! I hope.

1 more replies
Relevance 90.61%

My computer keeps telling me Unknown USB Device (Device Descriptor Request Failed), so I looked up how to fix it and they told me to uninstall it then scan for hardware changes and it will reappear working properly. Only it did not come back working properly, it came back the same. I am also 98% sure that this "unknown USB device" is my built-in webcam that has never once worked. So if someone wants to help me out and allow me to use my webcam that would be great!

Answer:Unknown USB Device (Device Descriptor Request Failed)

Hi there, can you first tell us what is the Name and Model number of your system?

What OS are you running

im sorry if you already listed this, as I cannot see your specs from the Windows Forum App..

I take it this is a laptop?

13 more replies
Relevance 90.61%

I have bought a new windows 8.1 Toshiba laptop when I connect my external hard drive witch was working ok before it's telling me - unknown usb device (device descriptor request failed) code 43

Answer:unknown usb device (device descriptor request failed)

did you try to go to power manager, shut off usb power saving

17 more replies
Relevance 90.61%

After installing Windows 10 anniversary update, I get the following error in the device manger: Unknown USB Device (Device Descriptor Request Failed)

Tried uninstalling and restarting PC. Reinstalled Windows made from media tool. Nothing fixed it. Did a google search and nothing has worked. No USB drivers on the PC maker's website.

Any ideas?

Answer:Unknown USB Device (Device Descriptor Request Failed)

You can try going into device manager > select show hidden devices and delete all "inactive" usb device appearances. In my example below, there would be four. Once done, reboot and try your device again:

1 more replies
Relevance 90.61%

Hi, i am having weird problem on windows 10. i fresh installed today and was installing drivers and other softwares. i couldnt set fingerprint because it says biometric device is not enabled. then i realized this error code : 43 . i dont know if it s related with fingerprint or not. also i installed old driver of integrated webcam in compatible mode win 7. i dont know if it caused this problem either. any help please?





ThinkPad X201 3680-AD6 / Intel Core i5 M560 2.67Ghz / DDR3 8GB / Intel SSD 730 Series 240GB / 12.1 WXGA 1280x800p / Dual boot Win10 Pro x64 - Ubuntu 16.04 LTS 64bit + X200 Ultrabase + ThinkVision LT2252p









Solved!

Go to Solution.

Answer:Unknown USB Device (Device Descriptor Request Failed)

Done!it was Fingerprint. fingerprint socket was unplugged. after i re-plugged the socket windows recognized biometric device. then i installed thinkpad fingerprint driver 6.0, all worked fine. there is no unknown usb device anymore. regards, 





ThinkPad X201 3680-AD6 / Intel Core i5 M560 2.67Ghz / DDR3 8GB / Intel SSD 730 Series 240GB / 12.1 WXGA 1280x800p / Dual boot Win10 Pro x64 - Ubuntu 16.04 LTS 64bit + X200 Ultrabase + ThinkVision LT2252p

1 more replies
Relevance 89.79%

Hey, I have some errors in device manager like port reset failed and device descriptor request failed.Long striy short: I have already tried all the standard answers several times. I dont know wich device is/was the one who caused the error. It coud be mine (already contected everything I have) or of some other person. My probem is not the "problem"... What really annoys me is windows keeping refreshing the device manager and with that causing my pc to freeze for a second randomly. I have unsinstalled the device, plugged the pc off power for minutes, tried to remove with usbdview and usboblivion and all the stuff with energy options! The thing is that an error loke that seems to not be a big thing, but I cant use my PC anymore. I need windows to stop trying to reset the usb port or whatever it does, just forget about the error/device. Has anyone an idea how to get rid o this? Thank you and hope the answers will help other too!

Answer:Device Descriptor Request failed

Hi timniko. Welcome to the TenForums @timniko

Can I ask when did this problem start? Had you added a device?

Have you tried resetting your BIOS? (Before you do please ensure you document or know current customizations?)

Have you check manufacture's site for a newer BIOS? Not recommending you update BIOS but it would be nice to know if they have a newer version. Updating BIOS has its own risks which can result in a "Bricked" machine.

I assume this problem happens with all external USB devices removed, correct?

Is it possible to get Hardware id's from device manager for problematic devices?
Ken

3 more replies
Relevance 89.79%

Hello
I have a USB device (X.Vision PCDVB-3100)
It work properly in Windows 8 and Windows 8.1
But now in Windows 10 when I connect it to USB port, The Windows give me this error:

?Windows has stopped this device because it has reported problems. (Code 43)
A request for the USB device descriptor failed.?



How I can solve this problem?

Answer:A request for the USB device descriptor failed

Probably the USB port cannot provide enough power to the device, so Windows cannot properly identify it. Try connecting it to a different USB port. If problem persist, the only solution is to use a powered USB hub that will provide the power necessary. Also some devices have problem working on a USB 3.0 port (blue), try using a USB 2.0 port (black).

4 more replies
Relevance 89.79%

Let me start out by saying that I've googled the shit out of this problem, tried several things, and nothing worked.

I have a D-Link USB 2.0 Hub that I got about a week ago. It's been working awesome up until recently. It's a plug and play device, however windows is failing to recognize it, and thus making everything I have plugged into it unusable.

In the 'Device Status' box it says:

Code:
Windows has stopped this device because it has reported problems.
(Code 43)A request for the USB device descriptor failed.

And in the 'Events' tab, there's a few listed, I'm not sure if they are much help:


Code:
Device not migrated

Device USB\VID_0000&PID_0002\6&1330e4d7&0&3 could not be migrated.
Last Device Instance Id: USB\VID_0000&PID_0001\6&3AE11B61&0&1
Class Guid: {36FC9E60-C465-11CF-8056-444553540000}
Location Path:
Migration Rank: 0xF000FFFFFFFFF100
Present: falseStatus: 0xC0000719


Code:
Device configured (usb.inf)

Device USB\VID_0000&PID_0002\6&1330e4d7&0&3 was configured.
Driver Name: usb.inf
Class Guid: {36FC9E60-C465-11CF-8056-444553540000}Driver Date: 06/21/2006
Driver Version: 10.0.14393.0
Driver Provider: MicrosoftDriver
Section: BADDEVICE.Dev.NTDriver Rank: 0xFF0000Matching
Device Id: USB\DEVICE_DESCRIPTOR_FAILUREOutranked
Drivers: usb.inf:USB\DEVICE_DESCRIPTOR_FAILURE:00FF2000
Device Updated: falseParent
Device: USB\ROOT_HUB30\5&35f8b9e6&0&0


Code:
Device not started

Devic... Read more

More replies
Relevance 89.79%

Let me start out by saying that I've googled the shit out of this problem, tried several things, and nothing worked.

I have a D-Link USB 2.0 Hub that I got about a week ago. It's been working awesome up until recently. It's a plug and play device, however windows is failing to recognize it, and thus making everything I have plugged into it unusable.

In the 'Device Status' box it says:

Code:
Windows has stopped this device because it has reported problems.
(Code 43)A request for the USB device descriptor failed.

And in the 'Events' tab, there's a few listed, I'm not sure if they are much help:


Code:
Device not migrated

Device USB\VID_0000&PID_0002\6&1330e4d7&0&3 could not be migrated.
Last Device Instance Id: USB\VID_0000&PID_0001\6&3AE11B61&0&1
Class Guid: {36FC9E60-C465-11CF-8056-444553540000}
Location Path:
Migration Rank: 0xF000FFFFFFFFF100
Present: falseStatus: 0xC0000719


Code:
Device configured (usb.inf)

Device USB\VID_0000&PID_0002\6&1330e4d7&0&3 was configured.
Driver Name: usb.inf
Class Guid: {36FC9E60-C465-11CF-8056-444553540000}Driver Date: 06/21/2006
Driver Version: 10.0.14393.0
Driver Provider: MicrosoftDriver
Section: BADDEVICE.Dev.NTDriver Rank: 0xFF0000Matching
Device Id: USB\DEVICE_DESCRIPTOR_FAILUREOutranked
Drivers: usb.inf:USB\DEVICE_DESCRIPTOR_FAILURE:00FF2000
Device Updated: falseParent
Device: USB\ROOT_HUB30\5&35f8b9e6&0&0


Code:
Device not started

Devic... Read more

More replies
Relevance 88.97%

Hi all,

(Unknown USB Device - A request for the USB device descriptor failed)

Massive problem I have encountered since buying a new laptop pre-installed with Windows 8.1

I have 3 external USB storage devices - 1x Corsair "Slider" 64GB, 1x HiTachi Touro 750GB, & 1x HiTachi 4TB external drive. ALL drives are coming up with the same error message and are not being recognized by Windows 8.1

The strange thing is, I also have another 2 PCs - one with Win7 and one with WinXP and the drives work without issue.

I've spent the last 4 days scouring the net looking for answers, and thus I am here hoping someone can shed some light as to why ALL of these drives do not work on this new laptop pre-installed with Windows 8.1?

Even stranger still is I have other thumb drives, a cheap Transcend 32GB (which is USB3.0) and a few cheapo (USB2.0) drives of various sizes by Strontium, Lexar and so on which work perfectly.

But the one that has me o.O is an expensive 64GB thumb drive called the Mach Extreme which also works perfectly with this laptop???

So all up 2x HiTachi drives & 1x Corsair thumb drive are not working and its driving me bonkers!

If no drives worked at all, then I would be seeking the manufacturer for maybe a faulty component. Dodgy USB ports, or maybe a motherboard problem. But having a handfull of drives, of various makes, sizes and both USB3.0 - 2.0 fully working leaves me scratching the old chrome dome as to what could be the issue

Would really real... Read more

Answer:A request for the USB device descriptor failed. (error43)

You can mark this thread as SOLVED!

Okay here's the fix that worked for me, maybe it will work for you.

I've always updated drivers, WinXP, Win7 and so on, the same way - download the driver, go into device manager and select browse, then point windows to the downloaded driver to update the necessary files. Its always worked that way for me for as long as I can remember.

Not so it appears with windows 8 - for some strang reason.

For me I had to update to the latest Intel Chipset Drivers, but instead of the tried and trusted methos above, you simply hit the setup.exe and let windows 8 do its thing. Believe it or not, but this fixed the issue.

Yes I had already updatd to the latest Intel Chipset Drivers using the device manager method, and yes windows "did" update ...someting??? But the USB devices were still showing the Unknown USB Device error. But using the setup.exe fixed the everything and all my USB devices are now working perfectly with Windows 8.

How, why, who knows, but I hope this works for others with the same problem.

2 more replies
Relevance 88.97%

Was trying to plug my Toshiba 1tb External hard drive in to retrieve music off it and it wont recognize the drive. Device manager revealed the yellow triangle and error message. It works on my wifes hp streambook and also my kids stream book both are running wondows 10 like mine. I have tried nearly 10 different suggestions from google searches and have gotten nowhere. The only thing I couldnt try was turning off the usb in the power options, for some reason mine doesnt display that option. My notebook only has 1 usb port so I cant try a different port. Any suggestions or fixes?

More replies
Relevance 88.97%

I have a flash drive that I previously used in public computer lab (where many viruses linger) the other day to do my work. As I got home, the flash drive isn't working anymore, saying "USB Device not Recognized". I also noticed that it really took me a while to finally, safely remove it from the computer lab's PC. So I actually wonder if it actually removed my flash drive properly.

On Device Manager, it says "Unknown USB Device (Device Descriptor Request Failed)".
On the Properties, the device status says "Windows has stopped this device because it has reported problems. (Code 43) -- A request for the USB device descriptor failed."

My flash drive is a Kingston Flash Drive DataTraveler (DT100) 16GB, and my PC is running on Windows 8.1.

Things I have tried:
- Shut down my PC, unplugged power and removed battery, waited for a while, booted my PC and try plugging in again.
- On Device Manager, uninstalled it and scanned for hardware changes, it still returns as "Unknown USB Device".
- On Device Manager, I clicked "Update Driver Software..." and it returns me a message saying "The best driver software for your device is already installed".
- Unfortunately, when I visited Kingston's website to check if there is driver for this specific flash drive, there isn't any... "There are no downloads or drivers available for this product".
- Used Windows 8's Troubleshooting tool. It only detected my problem, but was un... Read more

Answer:USB not recognized (Device Descriptor Request Failed)

if you have tried on other systems using different OS then the error is normally because of issues with the item not the PC , it might be 'confused' or have corrupted data or be faulty.

If you have the data still stored elsewhere...then you may be able to reset the flash drive and see if it recognises it then.

I'm not sure if there is a reset switch anywhere on that stick.

5 more replies
Relevance 88.97%

Hello, this morning my keyboard stopped working and the device tab says the line in the title with a yellow triangle on it as well. Everytime i try uninstalling them and reinstalling the same thing pops up. All usb ports are up to date. I have desktop and the problem is only with my keyboard (corsair k95). all usb ports work and all other devices work in every port. The solutions in the youtube videos and forums don't work for me. I really want to fix this as my keyboard is only 2 months old. I am desperate to solve this please help me¨find what the problem is so I know if I can fix it or not.
Kind regards, Kino

More replies
Relevance 88.97%

having trouble installing an Epson WF-2530 printer onto win 8.1 machines.
i have 3 win 8.1/64 bit machines. it will install and is working on only one.
used the same installation disc, and install process, and cables with all 3 machines.
googling the problem shows plenty of stuff mainly updating drivers. done that, still no good.
Not sure why it works on only one, a generic clevo laptop w550eu.
thoughts???
the installation process stumbles when it asks you to connect the printer cable to the computer.

More replies
Relevance 87.74%

Hi All,

Thought i would make this thread as i see others with the same issue. I have just built a new PC and i get the following error randomly.

"The last usb device you connected to this computer malfunctioned, and Windows does not recognize it."

The issue with this is i don't actually connect anything to the PC. the message just appears randomly then fixes it self on reboot only to happen again later.

I have reinstalled USB Drivers and the issue persists.
I only have two devices connected to the PC:
Razer Death Adder Mouse
Logitech K350 Wireless Keyboard.
Event Log Error -
Fault bucket LKD_0x144_USBHUB3_DEVICE_ENUMERATION_FAILURE_UsbHub3!TelemetryData_CreateReport_VEN_0000_DEV_0000_RE V_0000, type 0
Event Name: LiveKernelEvent
Response: Not available
Cab Id: 6813caa6-1a28-469f-8b39-08f1d092c8a4

DMP File:
DMP File - USBHUB3-20161220-1525.dmp
Bug Check Code: 0x00000144
Parameter 1: 00000000`00003003
Parameter 2: ffff8281`7cdbd7b8
Parameter 3: 00000000`40010000
Parameter4: 00000000`00000000
Caused By Driver: UsbHub3.sys
Caused By Address: UsbHub3.sys+365a0
File Description: USB3 HUB Driver
Crash Address: UsbHub3.sys+3173a
Check System Specs for PC Components

Answer:Random USB Issues - Device Descriptor Request Failed

I wonder if it is related to a bug in the last OS update as I just saw this error also and all of my USB devices are functioning correctly.

11 more replies
Relevance 87.74%

Hello Ladies & Gents.

I would like to ask for your assistance on this slightly annoying problem.

I have 1 pair of Razer Megalodon USB headphones, on the start up of Windows 8.1 these headphones are not detected correctly. The only proof I have of this is in the device manager displays:

Universal Serial Bus Controllers -
Unknown USB Device (Device Descriptor Request Failed).

(Please see attached screenshots)

Once the device is disconnected and reconnected device manager then displays:

Universal Serial Bus Controllers -
USB Composite Device

The device then shows in "Audio inputs and outputs"

Cheers,

Mr Collective

Attachment 38815

Answer:Razer Megalodon - (Device Descriptor Request Failed)

Razer is well known for BSOD drivers and problems, otherwise. (And taking very old drivers, changing nothing at all, giving it a new date and then claiming "Compatible!" with new OS.)

Perhaps give a shot with uninstalling their software, rebooting, the re-installing.

Make sure using the latest.

When all is said and done, you might just have to live with it.

Can't hurt to make sure chipset drivers are up to date. If Intel chipset, search their driver site for "Inf"

2 more replies
Relevance 87.74%

Hi all,

I have a problem with my Lenovo B50-70 Laptop. It has 2x USB 3.0 and 1x USB 2.0 ports.

It started when I removed a USB mouse from the USB 2.0 port. I had a message flash up saying
Windows has stopped this device because it has reported problems. (Code 43)

A request for the USB device descriptor failed.
If I go to Device Manager and 'Uninstall' the device, then plug the mouse back in and 'Scan for Hardware changes' it works. However whenever I unplug it I get the same error. I've tried doing them same thing and plugin in other devices, (my phone, a memory stick) and The error comes back. If nothing is in the port and I scan for hardware changes I get that message again.

Any ideas how to fix? It is almost as if the machine doesn't detect the mouse is unplugged and thinks it's gone wrong. The USB 3 ports are fine.

I've tried...
Checking for Driver/bios updates.
Cleaning the port.
Uninstalling all USB Drivers and reinstalling
 

More replies
Relevance 87.74%

Hello, The left USB socket on my X250 has started to return the message Device Descriptor Request Failed, but the right hand USB works as normal. I rarely used the left hand one so I am unsure for how long this has been the case, but now I am very keen to start using a USB keyboard so I am very keen to get it working again.I have tried uninstalling the device and reinstalling, and searching for new drivers.Thanks in advance for any help,Dave

More replies
Relevance 86.92%

Hi, I have been going crazy, Windows 10 does not recognize my DS3 controller as a Playstation 3 controller, it shows "Unknown USB Device (Device Descriptor Request Failed)" every time I plugg it in, so I can't install any of the softwares that make PS3 controllers work like x360 like MotionInJoy or SCPToolkit because these software can't see my controller in order to apply the custom drivers on, has anyone run into this?

More replies
Relevance 86.92%

Hi, I have been going crazy, Windows 10 does not recognize my DS3 controller as a Playstation 3 controller, it shows "Unknown USB Device (Device Descriptor Request Failed)" every time I plugg it in, so I can't install any of the softwares that make PS3 controllers work like x360 like MotionInJoy or SCPToolkit because these software can't see my controller in order to apply the custom drivers on, has anyone run into this?

More replies
Relevance 86.92%

I'm attempting to help my daughter fix her USB issue, so the information I have about the computer is minimal at this point. The computer is and HP Pavilion a6710t Desktop PC. It has a Foxconn motherboard. Here's the story, She's been using this computer for a couple of years, was running Window Vista. One day her wireless mouse and keyboard quit working. I gave her a usb mouse to try to no avail. The message when we plug any USB device that previously worked on her computer is 'Unknown sub device, device descriptor request failed'. After doing much research online and attempting a multitude of fixes from online sources I had the bright idea (being the computer genius that I am (NOT!)) to update her Operating system to either Windows 7 or Windows 8. She chose Windows 8. Here I'm thinking if I wipe the hard drive, do a clean install of Windows 8, the problem would be fixed. Boy was I wrong, still no USB ports are working. Makes no sense to me unless it's the hardware itself. Any suggestions? Ideas?
 

Answer:USB ports inoperable, error says, device descriptor request failed.

Based on what you have tried, it does seem to be a hardware error. One more thing to try is check the CMOS battery's voltage. It's usually a CR2032 rated at 3 Volt. Carefully remove it after unplugging the PC from the socket outlet, and check the voltage with a digital multimeter.
 

10 more replies
Relevance 85.69%

I'm experiencing slim keyboard not being recognized in the Windows 8.1
The keyboard was working fine until just one day it just stopped working.
I tried factory reset literally 8 times along with most recent BIOS update and dell's recommended update software. + power setting --> disabling power saving on USB
It still come up as unrecognized each time even with fresh reinstall.
I was wondering if this is a hardware issue or just software bug from factory reset.
I don't think there is a available driver for this kind of problem is there?

Log Name:      Microsoft-Windows-Kernel-PnP/ConfigurationSource:        Microsoft-Windows-Kernel-PnPDate:          8/6/2016 1:09:35 PMEvent ID:      411Task Category: NoneLevel:         ErrorKeywords:      User:          SYSTEMComputer:      DellDescription:Device USB\VID_0000&PID_0002\5&1347b1a9&0&4 had a problem starting.
Driver Name: usb.infClass Guid: {36fc9e60-c465-11cf-8056-444553540000}Service: Lower Filters: Upper Filters: Problem: 0x2BStatus: 0x0
 

More replies
Relevance 84.46%

i have acer e1-571 notebook.running windows 10.from last few days my pc giving this error-Currently, this hardware device is not connected to the computer. (Code 45)

To fix this problem, reconnect this hardware device to the computer.

A request for the USB device descriptor failed.                                                            
                                                                i have tried all kind of suggestions
given by microsoft related this problem .but   cant solved.card reader ,pen drive ,external keyboard ,or external mouse no one working.2.some  random  keys  is not working .please fix my issue .

More replies
Relevance 82.82%

Hi,
I sporadically gets the "USB Device Not Recognized Device Descriptor Request Failed"; however, while I have 6 USB devices connected, none of them seem to be the cause of the error. When I use devmgmt.msc to get the Hardware Ids, the value is simply "USB\DEVICE_DESCRIPTOR_FAILURE". I use TARGET software to control two joysticks and a rudder. (Besides these three USB devices I have a keyboard, a mouse and a TrackIR 5). In some instances everything works even though I got the error but in others instances none of the joysticks are working as expected. Sometimes restarting the computer helps or uninstalling the "mystic" USB device, however the problem always reappear and I would really like to get rid of it permanently.
Anyone got some idea what could be causing this?
I have updated all drivers but it did not help.
Thanks,
Klaus

More replies
Relevance 67.65%

I had my Samsung Core Prime plugged in via usb, I'm guessing I pulled it out without ejecting, as now whenever i plug it in, gives Drive descriptor request failed. It's not the port or the cord as the phone's charging perfectly fine. I've restarted both devices multiple times, uninstalled the usb drivers, and a bunch more. Any suggestions?

More replies
Relevance 67.65%

I had my Samsung Core Prime plugged in via usb, I'm guessing I pulled it out without ejecting, as now whenever i plug it in, gives Drive descriptor request failed. It's not the port or the cord as the phone's charging perfectly fine. I've restarted both devices multiple times, uninstalled the usb drivers, and a bunch more. Any suggestions?

More replies
Relevance 62.32%

Hi, Recently I installed windows 7 home premium on S10-3, try to install bluetooth driver (Broadcom Bluetooth Driver?,6.2.0.9407?) then a message pop up: No Bluetooth device was detected. Please make sure that your Bluetooth device is plugged in propery in order to continue install.) So what i can do to enble Bluetooth device and use it? Please HELP!!!! Many thanks

Answer:Lenovo IdeaPad S10-3 - No bluetooth device was det...

I got same issue too. Can anyone help please? thanks thanks ?thanks ?  

9 more replies
Relevance 62.32%

Most of the threads on this error are old, (2015) so I am starting a new one. I only notice it when I happen to be in the device manager. I have no problems with any of my connected USB devices (that I have observed).

I have tried uninstalling it, and rescanning and it pops up again, so apparently it is something that is connected. Without disconnecting All of my USB devices one at a time (which I am wont to do, as it is not bothering me, other than that it is there!) It has been there for quite a while, so apparently is not anything new being connected.

Is there no way to identify WHAT is connected to this port, or even what port it is?

BTW, it only shows up in the USB Controller section, no matching errors in any of the devices themselves!

Curiouser and curiouser...

Answer:USB device descriptor failed

Hi.
In Device Manager, right-click the problem device and select Properties. In the General Tab, it gives the error code. In the Details tab, use the arrow down to select Hardware Ids. Then google the ID to identify. Could be an internal USB connection to something like wifi, BT, or card reader. Those cables do go bad sometimes.
Example: USB\VID_046D&PID_0A04&REV_0007

6 more replies
Relevance 62.32%

So this kept happening before and then it stopped being problematic for a while..unfortunately the issue has once again returned. In Event Viewer it says usbhci or something. When this issue occurs a few things happen:
All USB devices cease to function until system is rebootedNetwork controller ceases to function
Event Viewer also shows an error (in System pane) for Kernel=PnP:

Code:
Log Name: System
Source: Microsoft-Windows-Kernel-PnP
Date: 12-Sep-17 1:02:45 PM
Event ID: 219
Task Category: (212)
Level: Warning
Keywords:
User: SYSTEM
Computer: Kyle-PC
Description:
The driver \Driver\WudfRd failed to load for the device USB\VID_04E8&PID_6860&MS_COMP_MTP&SAMSUNG_Android\6&18f52f5f&1&0000.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />
<EventID>219</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>212</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2017-09-12T12:02:45.418437100Z" />
<EventRecordID>14537</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="304" />
<Channel... Read more

Answer:USB Device Descriptor Failed??

Hi there. Run the troubleshooter within the Settings app > Update & security > Troubleshoot.

You may also want to look in Security Center > Device performance and health.

1 more replies
Relevance 62.32%

Most of the threads on this error are old, (2015) so I am starting a new one. I only notice it when I happen to be in the device manager. I have no problems with any of my connected USB devices (that I have observed).

I have tried uninstalling it, and rescanning and it pops up again, so apparently it is something that is connected. Without disconnecting All of my USB devices one at a time (which I am wont to do, as it is not bothering me, other than that it is there!) It has been there for quite a while, so apparently is not anything new being connected.

Is there no way to identify WHAT is connected to this port, or even what port it is?

BTW, it only shows up in the USB Controller section, no matching errors in any of the devices themselves!

Curiouser and curiouser...

More replies
Relevance 61.91%

So my laptop Lenovo Ideapad 110 is 1 year old. It's not that good. So it started like 5 months ago where it would randomly shut down when not connected to the charger. I think it's a problem with the battery because just recently I decided to factory reset it and when I connected my phone guess what happened, it freaking shut down. When it does that it makes a silent beep and I cant turn it on everytime it shuts unless I plug in the charger. Anything I could do to stop it without replacing the battery?

More replies
Relevance 61.91%

less than 2 months after buying my Lenovo Z560 i turned it on 1 day to get the 'no bootable device' message.  This meant the computer was totally non-functional. I rang support immediately on the Monday afterwards (they are not available on weekends).  I was told by the lady on the phone that all i had to do was to get a boot disk and that would fix the problem.  This sounded a bit doubtful but i was willing to give it a shot.  The lady said that i would have to wait 1-2 weeks for the boot disk to arrive.  i thought this was quite a long time to go without my laptop.  (The lady seemed to really struggle on the phone and i had to confirm my details about 5 times until she got them right). After 2 weeks i rang Lenovo.  The lady on the phone said sometimes they have shipping issues.  She said tried to deflect responsibility and then said she would call DHL to see what was happening with my disk.  She then said she would call me back in a couple of days to let me know what was happening.  I waited 2 weeks again (now a month total) and rang them back.  This time the lady noted that i had called earlier, said that i would be prioritised and she would get back to me ASAP.  That was 2 weeks ago.  I rang them all day today and all their numbers were engaged. So now it has been 6 weeks.  My laptop is only 3 months old and it has only been working half that time.  What am i supposed to do?&nbs... Read more

Answer:Lenovo Ideapad Z560 - no bootable device

hey FBDonkey,apologies on what had happened. could you pm to me the following : Name:Country:Mobile:Email:MTM [machine type model]:( To locate MTM - http://support.lenovo.com/en_US/FindProductNumber.page#find )Serial Number (S/N):Date of Purchase:Case/Order Number : (if any)Screenshot of Error(if applicable) : (upload it to a hosting site and paste the link here)Location of unit : Home / Repair Center (delete where appropriate)Description of issue :Troubleshooting Taken : (if any)





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

2 more replies
Relevance 61.91%

I AM FACING PROBLEM WHEN EVER I PLG IN HEADSET CONTINIOUSLY I RECEIVED MESSAGE 'YOU HAVE JUST PLUG IN AUDIO DEVICE IN PORT', EVEN WHEN I REMOVED HEADSET FROM PORT SAME MESSAGE APPEARS IN AUDIO MANGER

Answer:LENOVO IDEAPAD Z500 AUDIO DEVICE

Hi maq9882114,What's the OS that's ur using on your machine? Is it Win7,Win8 or Win8.1?Judging from your post it kinda look as if the components inside is not responding to the exit of the headphones. But that's just my guess. Have you actually tried reinstalling and installing audio drivers?

3 more replies
Relevance 61.91%

Hi all I have a Ideacentre K430 running on win 8.1. Used to run on win 8 After i upgraded to win 8.1, my WD My Book 4TB external Harddisk shows the problem as shown above. Used to be running fine and it can work on other win 7 or 8 terminals. Any way i can solve this. I have contacted WD but they say its not a device problem so they cannot help. I contacted Mricrosoft after some remote troubleshooting they told me i need to download the latest motherboard drivers which i did. But all solutions do not work. I tried googling for solutons and have tried microsoft message analyzer also to no avail. I am running out of options. Anyone able to help? Thanks in advance. RegardsAndrew

Answer:Device Descriptor fali code 43

Hi Andrew,
 
Welcome to Lenovo Community!
 
I?m sorry to hear that the External 4TB HDD (Hard Disk Drive) is not getting detected in your computer and ?Error code 43? is displayed when connected. Please let me know if the issue persists when the HDD is plugged into other USB ports and also does the same HDD is getting detected and working as expected when connected to other System.
 
Hope to hear back soon
 
Best Regards

Shiva Kumar






Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 61.09%

I have a problem with my JBL sound device on my Lenovo Ideapad Z510 laptop.I have spended hours with reinstalling , installing and updating drivers but nothing is helping me . It happened when i have disconneced my headphones from my Jack port ( The headphones are still working).Can someone help me ?BTW i know that my English is bad so sorry for my gramatic issues

More replies
Relevance 61.09%

Hello!I could use a little help with my new laptop - I installed Windows 7 (64) and all the drivers I could find on the drivers page, and still, it can't use my wired network. In device manager, its an unknown device (ethernet controller). Any tips where could I find a driver for that would me much appreciated! Thank you!













Solved!

Go to Solution.

Answer:Lenovo Ideapad B590 Ethernet unknown device

hi Solmenir,

Welcome to the Lenovo Community.

Please try installing Realtek LAN Adapter Driver v7.50.1123.2011, get it here:
http://download.lenovo.com/consumer/mobiles/h1r104ww.exe

If that doesn't work, I've sent you a private message regarding more details on your computer.
Cheers.

2 more replies
Relevance 61.09%

I have a Lenovo Z560.Eveything was going fine, in fact great when one day I was switching on the laptop and I found this on a black screen with white text: Intel UNDI, PXE-2.1 (build 083)Copyright(C) 1997-2000 Intel Corporation This product is covered by one or more of the following patents:US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776 and US6,327,625 Realtek PCIe FE Family Controller Series v1.19 (08/10/09)PXE-E61: Media test failure, check cablePXE-MOF: Exiting PXE ROMNo bootable device -- insert boot disk and press any key I am having this problem from more than 2 months now and I need a quick and urgent response to it.I have tried Lenovo one key recovery to start-up but the same message appears. PLEASE HELP! My laptop specification are: BIOS Version: 29CN29WW(V2.06)EC Version : 29EC29WW(V2.06)Lenovo SN: CBQ3670546 CPU Type: Intel(R) Core(TM) i5 CPU M460CPU Speed: 2.53 GHzSystem Memory: 3072MBVGA Memory: 512 MB 

Answer:No boot device found in lenovo ideapad Z560

Dear arjungarg
 
Welcome to Lenovo forums
 
can you find the HDD detected in the BIOS and if yestry to press F9 and then select yes and then
f10 and select yes also
 
Please inform me if you still face the same issue
 
Thanks

9 more replies
Relevance 61.09%

Windows 10 Home

Hi, I just bought a new HDD today and freshly installed windows 10 and have ran into this problem: when I plug in my wireless XEOX Pro Analog Gamepad from Speedlink I get the "Unknown USB Device (Invalid Configuration Descriptor)" error. I'm adding the screenshots.

This device worked perfectly on windows 7 yesterday, so the controller definitely isn't damaged physically and it does work on a different PC(windows 7).

More replies
Relevance 61.09%

Hi,
I have an USB device (an embedded system that I am developing) and associated driver.
It has one interface with two endpoints (BULK IN and BULK OUT) and control endpoint.
When I connect that USB device to PC, then device driver is getting associated with device and I am able to use the device.

Now I have updated USB device descriptor to have one more interface (all other information like VID, PID are same and also existing interface is not altered). Now it has: one control endpoint, one interface with BULK IN and BULK OUT and another interface
with BULK IN endpoint.

When I connect this USB device with modified device descriptor, USB driver is not getting associated and giving me error code: 10 (0xA).

Device driver software is from 3rd party.

Now I am not sure if error is thrown by windows kernel or device software.
Please help me in debugging this.

Any log files/events that can be enabled when device is connected and how driver is loaded, what checks are performed by kernel to load the driver etc (I believe it only looks at VID and PID).

FYI: Same setup works on Linux environment (looks liek linux just ignores this additional interface added)

Rgds,
Venkat.

More replies
Relevance 61.09%

I have two WD "My Book" 3.0 USB drives.  Previously, they both worked fine.  Now one of the two drives is getting a device descriptor request failed message.  The other drive is fine.  I have tried different 3.0 inputs on the system both in back and on top in the front.  Any ideas on why the same drive isn't working?  I have tried both on other systems and they work fine.  The other systems I have tried them on are WIN7 and WIN 8.1.











Solved!
View Solution.

Answer:usb 3.0 drives getting device descriptor failed error

Hi there slovey  Have you, by any chance tried with another USB cable? I wouldn't make sense to change things as the device works on other systems but it wouldn't hurt to use the other My Book's cable with the problematic one just to rule this out as a potential cause. I would also check this thread and see if the offered solutions there help.  Keeping your OS, BIOS and drivers up to date is also an important part of the troubleshooting process. I'd also check if there's a new update specifically for the driver responsible for the communication between the drive and the system. Post back if you need more info! Captain_WD.

4 more replies
Relevance 61.09%

Windows 10 Home

Hi, I just bought a new HDD today and freshly installed windows 10 and have ran into this problem: when I plug in my wireless XEOX Pro Analog Gamepad from Speedlink I get the "Unknown USB Device (Invalid Configuration Descriptor)" error. I'm adding the screenshots.

This device worked perfectly on windows 7 yesterday, so the controller definitely isn't damaged physically and it does work on a different PC(windows 7).

More replies
Relevance 60.27%

I just placed a ssd from another laptop in the new laptop today and both the touchpad and usb logitech m310 mouse were working fine.After using windows update to update suggested drivers I lost my mouse and notice an error in the device manager.The error was on Intel USB 3.0 extensible host controller. I've removed and reinstalled the driver several times. The existing sdd has synaptic drivers for the touchpad and after doing the updates I noticed that Elan is now driving the touchpad. Any help would be greatly appreciated. Thanks 

More replies
Relevance 60.27%

Hi everyone I've just bought a lenovo ideapad flex14. Excellent little laptop, but im wondering about a thing.Under device manager --> display adapters, theres is two graphicscard. But there should only be one in the machine?The two graphicscard in question is:- AMD Radeon HD 8330- AMD Radeon HD 8570M My model is:AMD A4-5000 quadcore 1,5 ghz.AMD Radeon HD 8570M8 GB DDR3 ram it should only be the AMD radeon 8570M with 1 gb dedicated memory. Furthermore severeal hardware info programs shows the same two graphics card, but only 8330 has temperature info, along with other informations. Have any of you an idea of why this is?  Thanks in Advance Mikkel Seremet Kofoed













Solved!

Go to Solution.

Answer:Lenovo Ideapad Flex 14D - Device manager says it has two graphic cards?

thats because your cpu has built in GPU as well, this is called APU when amd has gpu built inside their cpu chip so then it detects 2 gpu 1 from cpu and 2nd one thats installed on motherboard it's same for intel laptops they usually have Intel HD graphics card built inside cpu chip while 2nd gpu is installed onto motherboard. every AMD Ax series of cpu has a GPU in them if i now understood it right.

2 more replies
Relevance 60.27%

I have Lenovo ideapad z 560. Warrany is gone.Yesterday i was using window vista for movie, suddenly it crashed, restart and shows this message"no bootable device found, press any key" I saw some where on internet that may be hard disk gone. But i tried ubuntu live cd and check all hard disk partition. All are working fine. Please guide me. What to do??

Answer:no bootable device found, Press any key in lenovo ideapad Z560

it usually points hdd issue as you said but could be just windows issue. please, try to perform clean windows installation by pressing one key recover button first. or if you have windows installation dvd, you can try to repair the windows if it helps.

1 more replies
Relevance 59.86%

I'm designing a USB device with Microchip's MLA v2015-08-10 on a PIC24FJ128GB202(http://www.kynix.com/Parts/158263/PIC24FJ128GB202-I%2FSP.html). The device works as expected on my Fedora 23 Linux system. It enumerates and is recognized as a HID device.
On Windows it does not enumerate. I tried a Windows 10 laptop and Windows 7 in a virtual machine on my Linux system. Both say: "A request for the USB device descriptor failed." (Code 43)
When I analyze the traffic with Microsoft Message Analyzer I find this error: Get Device Descriptor - USBD_STATUS_STALL_PID
I find no solutions online and have no idea where to look next. I assume my code on the PIC is working fine since it runs on Linux. It's clearly not a driver issue since I can't even get the device descriptor. And it isn't a problem with the system since it fails on different devices with different Windows versions.
Does anybody have an idea where to continue my search? An explanation of the differences in USB device enumeration between Windows and Linux might already help a lot.

More replies
Relevance 59.45%

My HDD crashed and I didn't back up my drivers, I got all of them from the lenovo support site for my Lenovo Y570 and still remains "Base System Device" drivers. I've tried the Lenovo Update scan thing and searching google for people with similar problems, I came up with nothing.

So I ask here, what are these drivers? Where can I find them?

Pic below is device manager; in properties it states location as PCI Bus 10 (I have no idea what this means or if its relevant)

I can't notice anything wrong with my Laptop as it is now, everything works (I haven't tried gaming, except I can no longer scroll with my touchpad, the sides used to allow me to but now the whole area of the pad is touch to click)

Thanks for your help in advance would be a huge help if you could help me work this out.

ht
tp:/
/i41.tin
ypic.com/2n
a1apt.jpg
 

Answer:[Request] Lenovo y570 "base system device" drivers

Have you looked here?: http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_list.aspx?CategoryID=867235

Try the chipset drivers.
 

3 more replies
Relevance 57.81%

I've had my laptop (Lenovo Ideapad z710) for almost a year and I've often had problems with the integrated GPU battling the dedicated gpu. I had developed work arounds for these BSOD crashes and everything was fine.  But yesterday I realized my Nvidia Geforce GT 745m gpu no longer shows up in Device Manager. It is also not identified by the programs Speccy and GPUz.  My pc runs fine but It won't allow me to use my dedicated gpu, this becomes a problem when i want to run graphics intensive games or programs. I cannot update the driver because it does not see that I have the graphics card installed.  This has to be something that happened in the past few weeks because I used my Nvidia gpu last month.  I recently updated my bios from the Lenovo website, it updated sucsessfully and I can't be sure that it caused this problem but it is a possibility I suppose.  I have read about this issue on several forums but have not found a solution.Any help or advice or people with similar issues would be greatly appriciated! Thank you! SPECS:Lenovo Ideapad Z710intel Core I7-4700MQ (2.40GHZ)8gb Memory1TB HDDNVIDIA GeForce GT 745M1920x1080 17.3"Windows 8.1 

Answer:Device manager stopped recognizing dedicated GPU (Nvidia GT 745m) - Lenovo Ideapad Z710 windows 8.1

If you cannot see it anywhere, most probably its dead.
 
If you are in warranty, you should get it repaired from Lenovo.
They might have to replace your motherboard.
 
The steps you can try -
1) Clean install of graphics drivers. (Wiont work since your GPU is not recognized)
2) Reset your laptop to factory settings.

4 more replies
Relevance 54.94%

Greetings folks

I have a problem that bugs me for years, I never intentionally solved it, sometimes those errors disappears and all USB ports work fine, sometimes they do not. So anyone can help me please, it would be great.

Some of my ports do not work all the time, I cannot identify a specific moment. Inside the Device Manager, Universal Serial Bus controllers, I get 1, 2 or more "Unknown USB Device ( Device Descriptior Request Failed )", sometimes more sometimes less.

CPU: Intel Core i7 3770
Motherboard: AsROCK H77 Pro4/MVP
Windows 10 all available updates downloaded and installed as of today, and everyday. The problem appeared on Win 8 or 7, not sure when. So it's not necessarily Windows 10 specific. I ported it to 10.
Here is what they look like:
http://prntscr.com/d6rm6k

Bios is up to date. Chipset drivers updated, various solution tried from googling, I even managed to make all USB ports stop working testing some of these solutions, I had to restore windows from a ghost image I had.

It's like these USB ports remain suspended sometimes.

Any advice on what to try? The most annoying part is that from the frontal USB ports some stop working randomly too.

Thank you

More replies
Relevance 54.94%

hello    i'm an embedded developer. i have an usb type ic programmer to burn microcontroller. now i'm getting this error "Unknown USB Device(Device Descripter Request Failed)" while plug my usb programmer into my pc socket. but this same hardware support in my friend same hp430 pc.

More replies
Relevance 54.94%

Greetings folks

I have a problem that bugs me for years, I never intentionally solved it, sometimes those errors disappears and all USB ports work fine, sometimes they do not. So anyone can help me please, it would be great.

Some of my ports do not work all the time, I cannot identify a specific moment. Inside the Device Manager, Universal Serial Bus controllers, I get 1, 2 or more "Unknown USB Device ( Device Descriptior Request Failed )", sometimes more sometimes less.

CPU: Intel Core i7 3770
Motherboard: AsROCK H77 Pro4/MVP
Windows 10 all available updates downloaded and installed as of today, and everyday. The problem appeared on Win 8 or 7, not sure when. So it's not necessarily Windows 10 specific. I ported it to 10.
Here is what they look like:
http://prntscr.com/d6rm6k

Bios is up to date. Chipset drivers updated, various solution tried from googling, I even managed to make all USB ports stop working testing some of these solutions, I had to restore windows from a ghost image I had.

It's like these USB ports remain suspended sometimes.

Any advice on what to try? The most annoying part is that from the frontal USB ports some stop working randomly too.

Thank you

EDIT: The problem is the motherboard. The computer was checked at a computer service, and it seems the time has come for it to be buried.

Answer:Unknown USB Device ( Device Descriptior Request Failed )

Hi Rostos and welcome to Ten Forums!

I would recommend two utilities. Maybe they can reveal what's going on.

USB Device tree viewer from Uwe Sieber and Nirsoft's USBDeview. They will give you info about connected devices..

32 more replies
Relevance 53.71%

I have an external Bluray/DVD drive (ODP1201=S3-B) that works perfectly on Windows 7 but is not recognised by my new laptop which has Windows 8.1 64 bit. Can anybody explain why this is and what I do to get pass it, or is this a problem with Windows 8.1?

The device is listed in Win 7 as "hp bd rom bc 5501h", and the driver is 6.1.7601.17514

I have now tried various USB devices; I have connected a USB 2.0 External Hard Drive and a USB 2.0 Canon Camera both of which work OK, I have also connected a Seagate 1T external drive which is USB 3.0 an that was OK as well (the ports are all USB 3.0 on the laptop hence the reference to the which USB type)

The error message is as follows: "USB Device Not Recognised", When I go in to Device Manager I find two USB error listings, Unknown USB Devise (Device Descriptor Request failed) & Unknown USB Devise (Port Reset Failed)

I have been advised that this error can arise when a drive doesn't receive enough power from the system. The device does have two USB connectors, I have tried using both of them. The power cable going to the powered USB on the laptop and the data going to the adjacent USB (there are a pair of USB sockets on either side of the laptop, the right hand side having the only powered socket).

Answer:Unknown USB Device - A request for the USB device descript

I'm too of opinion that it's a power issue. Laptops are not known to have much power thru USB ports, not even some desktops for that matter. Possible solutions: If that laptop has USB3 port you can try it in there, it gives more power and is compatible with USB2. Another one is to ad external power to the drive. One of the USB connectors on the twin cable has only two connection tabs and is for extra power to device. That one can be connected to universal USB charger for phones etc. That's how I solved a problem with a HDD in external enclosure.

8 more replies
Relevance 52.48%

,Comment proceder a l'ouverture du cache cd?
 
French to English translation.....
 
How to open the cd cache?
 
Mod's Edit: Google translated for benefit of English readers. Since this is an English forum, please post in English as it will ensure a better response. Thanks!
 

More replies
Relevance 51.25%

Hi, I wanted to ask those of you that has the Lenovo Ideapad Y Series, if you may show me a video of any sort of gaming on it, because I would really want to see if this laptops screen is not as bright and clear as other manufactured glossy screens. It will highly be appreciated. Thank you.  P.s. Just wanted to know if this laptop when turned on is loud or not? Thanks!Message Edited by steven518 on 02-12-2009 09:49 PM

More replies
Relevance 51.25%

Hi Everyone Can someone please send me a phone number or contact person to purchase an extra battery for the Y510?  What is the 1-800 number for Lenovo parts for the Y510? Thank you 

More replies
Relevance 51.25%

USB ports don't recognize my device.Strange thing is, it sees my memory stick and it see my wireless mouse. But not my phone or my stand alone hard drive.
I have tried updating the drivers in Device Manager. uninstalled the drivers and then reinstalled them again. To no avail.
Anyone have any ideas on a solution?
Laptop is an... ideapad S510p
Didn't matter which Operating System. Problem was already there using Windows 8.1 and was carried on into
Windows 10.
 
 
 
Mod's Edit: System model added to Subject line to improve visibility / clarity

Answer:ideapad S510p - USB device connected to port but I can't see device in My Computer

Hi Bigyin,
 
Welcome to the Forums  
 
As per the query we understood that you are facing issue with USB in your Lenovo S510p laptop.
 
Connect an external (USB) mouse and check for the issue, also check with different USB ports. Check if the ports are damaged.
 
Best regards,          
 
Ashwin.S





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 50.84%

Hi ,
 
 
       We purchased 3 lenovo ideapad 110-15ISK Laptops (ideapad). in that i installed windows 7 professional os. i am trying to incre,decrease screen brightness(fn+f11,fn+f12). but brightness control buttons not working. how to control brighness part.Now brightness is very high. Because of this brightness i am getting eye pain. So Please provide me solution for brightness control. my mail id : ******@Gmail.com.
 
Mod's Edit: Email address removed from public view to protect owner from email harvesters.
 
 
 
Thanks. 
 

Answer:i am using lenovo ideapad 110-15ISK Laptop (ideapad) .. brightness buttons not working.

jagadeeshn wrote:i am trying to incre,decrease screen brightness(fn+f11,fn+f12). but brightness control buttons not working.I installed Windows 7 on my 700-15ISK, and the following version of the Lenovo "Energy Manager" application allowed the F12/F12 keys to control screen brightness: http://pcsupport.lenovo.com/gb/en/downloads/DS100173 If that does not work for you, you can control the screen brightness in Windows "Control Panel": (1) Click "Start" > "Control Panel" > "Display" > "Adjust brightness" (left side menu). (2) At the bottom of the screen there is a "Screen brightness" slider control. Drag that left or right to decrease or increase the brightness of the screen. -- from CyberSimian in the UK  

1 more replies
Relevance 50.84%

I need the pll for this model please!!!!

More replies
Relevance 50.84%

Hello All, This is my first post here. I bought an Ideapad z575 a couple months ago and I think it's a great machine. In the BIOS one can set up a HDD password for security but the maximum password length is seven characters. A seven character password is useless because it's very easy to brute force crack the password. A fourteen character password/passphrase would be much better. A twenty character or longer password/passphrase would be better still. The BIOS password should be longer than seven characters too. I request that Lenovo increase the maximum BIOS and HDD password/passphrase length from seven to fourteen or more characters. Thank you.





--Steve in California--

Answer:Ideapad BIOS feature request. Longer HDD PW Please.

hey z575-owner,thank you for the suggestion. I'll let the engineers know about this.





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

1 more replies
Relevance 50.84%

Hi all,Is there any chance to influence Lenovo about BIOS update wchich would turn on VT support (and some other BIOS settings)? Is there anyone who could pull some strings, whisper few words here and there and get it done I think all IdeaPads owners would greatly appreciate such an update (Anyone agree with me? ).





Ideapad Y530; P9500 @ 2.53 GHz; 250 GB 7200 rpm HDD; 4 GB OCZ RAM, nVIDIA GeForce 9300M GS

Answer:[IdeaPad Y530]Lenovo please TURN ON VT Support in IdeaPad line.

Call tech support and let them know that it is not acceptable that VT is not supported in the BIOS.

1 more replies
Relevance 50.43%

I have tried a few different windows images, windows troubleshooting feature, and the latest versions of the drivers.
I've tried uninstalling and reinstalling drivers, disabling and re-enabling, re-imaging, updating windows. None have had the effect of actually making it work. I'm running win 10.0.10240, on dell latitude 5285 and 5289. This is affecting the entire Intel Integrated Sensor Solution Driver and all the included sensors, compass, accelerometer, gyroscope GPS and ambient light.

hardware id: HID\Vid_8087&Pid_0AC2
I would like to resolve this so that we can order tablets and have them work right in our org.

More replies
Relevance 50.43%

Am using a Y700-15ISK Core i7 with a 960MThe problem is... the CPU core temp reaches 100 Degrees in any game, but the FAN speed remains normal.Now... i know a lot of people complained about the loud FAN noise, but i dont seem to have it at all.So a BIOS FAN control Would be nice to have, or a windows based will also do.With 3 Modes. Quite - Normal - Agressive. Who Do i contact to request the feature?Thank you.

More replies
Relevance 50.43%

All,
 
OK - officially, your request is noted and is being communicated back to development.   I actually think creating a petition could help, and feel free to try to get others to vote on it as well.   Customers used http://www.petitionspot.com to help create awareness to restore ThinkVantage System Update when it was sunset (and later restored) in 2009. 
 
I agree ithe FN - CTRL was something we heard about a lot on ThinkPads, and so I think it makes sense on IdeaPads, so let's see how many people really want this...
 
I cannot promise that this will be changed on this generation of product, but obviously it could be changed in BIOS.   This is not a defect, but constitutes a feature / change, which has a different priority level than something being wrong with the product.  I understand that some of you do not agree with how the product was designed, but in fairness this isn't hidden and could be seen prior to purchase, so let's not try to lump this in with display driver issues, ok? 
 
There was a very good reason why FN was in lower left corner on ThinkPad - it was done to improve usability and those that have always had ThinkPad are used to it, and if we changed it, we would alienate those customers.   Of course, some of our competitors have CTRL and FN the other way with CTRL on the outside corner and as customers get used to those and then move to ThinkPad, we ar... Read more

Answer:FN - CTRL Swap in BIOS - Change Request for IdeaPad

Yes, please change the title, I will start coralling the masses.
 
I have started a petition here:
http://www.ipetitions.com/petition/lenovoideapadfnctrl/
 
Please disseminate this to all Lenovo/Ideapad forums you also participate in.
 
Note from Moderator:  A comment which violated the forum rules was removed.





*****************************************************************************| Lenovo Y560 06465BU | i7-740QM 1.73GHz | ATI HD 5730 1GB | 15.4" HD LED 1366x768 LGD229 | Intel Wi-Fi 1000 | Win 7 HP x64 | Bluetooth 2.1 + EDR | 3dMark06 8189 | BIOS v62

9 more replies
Relevance 49.61%

so I upgraded from  lenovo y570 and bought another y400 ..looks like it was a horrible decision as Lenovo is at it again locking us paying customers out of functionality of OUR MACHINE ..I DID NOT LEASE IT I BOUGHT IT WITH CASH..having said that , I am requesting a link for a modified bios for my y400 so it can see my hardware.. no whitelist please..otherwise I am more than happy to return both of these machines and buy a different OEM.thank you

Answer:Ideapad Y400 Bios Unlock request or give me my money

I also bought a y400 and now realize that the locked bois is extremely annoying.  The severe power management provides decent battery, but unfortunately cripples the gpu.  I wish I could downclock the cpu and allocate some more power to the gpu.  The current power management provides too much power to the cpu so the gpu downclocks to 135 MHz. Unfortunately this tweak is controlled by the bois.

2 more replies
Relevance 49.2%

Ok, today when I turn on my computer in the morning all of a sudden it took ages to boot, when it booted my D: drive was not showing in MY COMPUTER.

Computer wasvery unresponsive, so I checked the Administrative events and I saw like a hundred of this message:

A request to this device has been cancelled.
Device: \Device\RaidPort0
Model: WDC WD1002FAEX-007BA0
Firmware Version:05.0
Serial Number: WD-WMAUR0614125
Port: 1

I had 3 Sata drives in my system, this one (Wester Digital Caviar Black 1000gb) had my sample libraries and it had just like 19gb of free space.

When I disconnected the drive computer booted normaly.
I dismounted the drive and put it on a usb docking station and it was not recognized and computer was slow again..

I see the BIOS and the HDD shows there.. (strange)

I can't believe my HDD died on me cause I just have like 4 months with him..

What are your advices over this issue??

Thanks a lot people

Answer:a request to this de device has been cancelled

Try burning this iso to a cd/dvd: WD Support / Downloads / SATA & SAS / WD VelociRaptor

Boot from the optical drive and see what WD's diagnostics program has to say about the drive. (WD's diagnostics program is the same for most of their products, so don't worry if the product on the d/l page doesn't match yours.)

If the drive seems to be only marginally healthy you may want to make sure you backup all data from it before running the tests.

9 more replies
Relevance 49.2%

Can I use the Lenovo IdeaPad 65W AC adapter with my new Y560?  The IdeaPad 65W AC adapter is smaller, better for travel.CliffordS













Solved!

Go to Solution.

Answer:IdeaPad Y560 and the Lenovo IdeaPad 65W AC adapter

 

 
check its compatibility first.

6 more replies
Relevance 48.79%

can I put a Lenovo Ideapad s10-3t touchscreen on a lenovo ideapad s10-3? Would I have to have anything extra to put on it?

More replies
Relevance 48.79%

Lenovo Ideapad 700 i5-6300 /  8GB RAM  / 500GB HDD / GTX950M ORLenovo Ideapad Y700 FX-8800P / 8GB RAM / 1TB HDD / Radeon R9 M380 4GBWhich one of those will perform better in GAMING? Does any of these two got GPU throttling problems?Which is best suited for a gamer?Thanks in advance. 

More replies
Relevance 48.79%

I've been currently using a 600gb SATA HDD for my OS etc and everything else. I decided to put in my other SATA 320gb HDD as I am going to need more space (Recording with my hd capture card takes up alot of space!). I put it into the HDD bay, plugged both the SATA cable and power cable into it. I turned on my PC and it read it and said it was set to go. I went into Computer Management to set it up and a window popped up saying I needed to initialize Disk 1 being the drive, so I clicked ok. It freezes for a second and then a small box pops up saying "The request could not be performed because of an I/O device error." Please help, I am very smart with computers for the main concept however HDDs are actually one of the only things I'm not very experienced with. Thanks guys! I appreciate any support. I am using Windows 7 64 bit OS in case that matters.
 

Answer:NEW HDD - The request could not be performed because of an I/O device error.

OK, first of all, we have no idea what you are working on. Post your exact system specs ie make and model of mb, cpu, amount of ram, etc. If this is a big box system, then post the make and model.

Have you rechecked/reseated both pw and data connections for the drive?

Have you tried a different sata cable and or a different sata port on the mb?
 

1 more replies