Computer Support Forum

where i can buy screen digitizer for my BLU win HD lte X150E ?

Question: where i can buy screen digitizer for my BLU win HD lte X150E ?

I want to repair the touch screen digitizer but there is no site who sell the same spare.suggest me plz

More replies
Relevance 100%
Preferred Solution: where i can buy screen digitizer for my BLU win HD lte X150E ?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 53.71%

recently I purchased BLU win hd Lte X150E. I'm facing battery draining problem, I'm using on win-10, i was stopped background running programs like apps, photos update but still battery was drain fast within 3hrs. I think to change my battery? Pls help me.

Answer:My Blu X150E battery draining fast

There is a reset button on the HD LTE that might very well help. BLU WIN HD LTE - Weird Charging Issue (charging but percent decreases), can I get some help?
A couple posts below that is a picture showing the location of the fabled reset button.
If you need additional help or have more questions or details to share, please join the site so you can reply in this thread... Please see this link for instructions on how to join Windows Central.

0 more replies
Relevance 52.89%

recently I purchased BLU win hd Lte X150E. I'm facing battery draining problem, I'm using on win-10, i was stopped background running programs like apps, photos update but still battery was drain fast within 3hrs. I think to change my battery? Pls help me.

Answer:BLU wind hd lte X150E battery draining fast?

There is a reset button on the HD LTE that might very well help. BLU WIN HD LTE - Weird Charging Issue (charging but percent decreases), can I get some help?
A couple posts below that is a picture showing the location of the fabled reset button.
If you need additional help or have more questions or details to share, please join the site so you can reply in this thread... Please see this link for instructions on how to join Windows Central.

1 more replies
Relevance 51.66%

I tried through windows recovery tools and becuse of some techinical problem usb disconnected and mobile software crashed. No logo or disply or light seen. shows totaly dead. if we connect computer massge seen that there are some unknown usb device connected.(my blu win hd lte (x150e) dead at the time of recovery due software crash). what is the solution to recover?

More replies
Relevance 51.66%

I have a cracked screen on Yoga 2 13  and i am thinking to replace it. Since warranty is not working I contacted the service centre and they offered the replacment for the price of new laptop. So I said thanks either I will use as it is or find cheaper.  So please help me find the cheaper one which the most importantly fits to my one. I bought it in China (but not there anymore) and as I see the whole screen no. is 73048979. Also it issaid on paper  "13,3 FHD LED TS". I find part no. like B133HAT02.0   or LP133WF2 SP A1. But not the previous one. Can you help with finding the right one. It is frustrating a bit since I am not tech man. I am thinking sending back from here: http://www.365laptoprepair.com/Product/Lenovo-Yoga-2-13-Screen-Only or from ebay where I can find cheaper Chinese one. Is the screen from the link fitting my model? anyone knows?

More replies
Relevance 51.66%

 Hi I have hp laptop with following properties: Natural Silver 13.3" pavillion x360 13 s194nr convertible laptop with 6th gen core i5 processor, 6 GB of ram, touchscreen 500 GB hard drive and windows 10. recently my touchscreen digitizer has been broken and I had such a hard time to work with my laptop. I want to replace my broken digitizer by the new one, but unfortunately I couldn't find any web site providing me a link to buy a digitizer, although I searched a lot. I lived in Pakistan and needed it within reasonable time. So, I just wanted to know if there is anyone here knows how to buy a digitizer for Natural Silver 13.3" pavillion x360 13 s194nr convertible laptop?  

Answer:Where can I buy a touch screen digitizer for hp?

Hi, Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community! I have gone through your issue of touchscreen digitizer has been broken. So there are Two option: 1.  If your product is under warranty then contact HP call center and asking for that hardware replacement in HP service center. So hp executive will help you as needed. Also you can call if it's out of warranty and want to fix it. 2. You can purchase online also , as few online sellers are selling that product and fix it on your own. I would recomend the option 1. Hope this will help. Thanks.  ****Click the White Kudos star to say thanks********Please mark Accept As Solution if it solves your problem****




I am an HP Employee.

1 more replies
Relevance 51.25%

Hi guys, So I took my laptop out of my bag about a week ago and found this:http://imgur.com/HIRHJ(I took the photo today, I've been too busy to deal with the issue for the past week but I've played around with it now.) As you can see on the screen, there is a large crack across the top right (which I have no clue where it came from, considering I had nothing in my bag but the laptop and my bag was never impacted in any way). Most importantly, however, no image is displayed, which renders my laptop unusable as a laptop (and I desperately need it for uni, fortunately this past week was a break but now I am without a laptop to take notes in...) Plugging in the laptop to an external monitor works fine as expected, however, so does the digitizer pen. i.e. if I wave my pen above the broken screen, it appears to work perfectly on the duplicated external monitor, clicking and all. So, my guess is that all I need to do is replace the screen, right? According to the manual, http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/0a60175_04.pdf (where mine is 4294-CTO), the LCD panel I want is 04W1545. I've found one for $175 which is great, but when I asked if the place could also replace the screen for me, they said it would no longer be a tablet. They said they "think I might need to get the full screen + digitizer for $650 + installation" which is utterly ridiculous, considering that's nearly the price I paid for the laptop. What I wa... Read more

Answer:Screen replacement - digitizer support

replacing the Tablet LCD is a very expensive exercise, since there is also a digitizer layer involved. Try calling Lenovo warranty service, and ask about aftermarket parts sale, and specifically request the parts . But it won't be cheap, around the price that you have been quoted for the full repair. If you are worried about cost, then you should probably sell your current laptop for parts or as it is. And then get another X220t.
 
Aftermarket parts for the X220t screen assembly isn't widely available, so this drives up the price of available parts. From the picture, you got the X220i Tablet, which is not sold in Australia.

9 more replies
Relevance 51.25%

I have an HP TC4400 Tablet PC with 1024x768 resolution and i want 1280x800.

1) Would it be possible for a 12.1" wxga (1280x800) screen to work correctly in it? Does HP use a generic monitor plug-in for all their laptops that would allow the screen to plug in?

2) If the resolution was higher would that require a new digitizer?

I know these are tough questions to answer unless someone on here as done this in the past but any input would be appreciated.
 

More replies
Relevance 51.25%

Hello,  My Yoga 2 Pro's screen and digitzer is broken ( I think ). The screen has cracks starting from the camera down to the bottom of the screen. I'm going to college soon and I love this computer and I need one for classes. The display still works but I want the tablet feature to work again. If anyone can help me find a way to fix it that wont make my wallet cry that would really be appreciated. Thnaks 

More replies
Relevance 51.25%

Screen cracked on Hp envy x360 serial number [personal information removed]. The screen is cracked and every so often the screen shakes from side to side or zooms in and out on its own.
 
I need a link to either the screen or screen and digitizer

More replies
Relevance 51.25%

Hello all.  I have this model of laptop : HP Spectre 13-3000ea Ultrabook (ENERGY STAR) . I have some questions . on the screen there is a small crack (digitizer) . is it possible to replace only the digitizer? or must be replaced completely screen ? I bought on ebay.com  digitizer for my leptop  but no one is taken to replace the digitizer all say that it is necessary to completely replace the screen this is true ? or may be replaced only digitizer?

More replies
Relevance 50.84%

Did the earlier models of the thinkpad yogas sold on lenovo.com all come with the wacom digitizers? I've read that all models of the thinkpad yoga sold on lenovo.com came with the wacom digitizer. I ordered a thinkpad yoga off lenovo.com with the 1366x768 screen on Feb 23 and I haven't received it yet. I could've swore that when I chose the screen resolution their was none that specified it came with the pen and wacom digitizer, but now I'm second guessing myself. Now I see that it only comes with the 1920x1080 FHD screen and it that option specifies it has the pen and wacom digitizer. So I'm just wondering if the earlier models from lenovo.com came with the wacom digitizer and they just recently switched it to only available on the 1920x1080. The part # for my computer is listed as 20CDCT01WW.

More replies
Relevance 50.84%

I opened my Y2Pro only to find my screen cracked on the left hand side. Other than no touch screen it works fine. From what I understand it's only the digitizer that is cracked. I found a replacement Lenovo digitizer but can't find instructions on how to fix it. Laptop repair 365 has a video on replacing the whole screen. I'm now seeing posts saying the digitizer can't be separated from the lcd...Any help would be appreciated.

More replies
Relevance 50.84%

Hello Summary:I bought a 20CD0001IV about two months ago (Demopool). I need it for work and drawing, but so far I have numerous issues. And right now I'm kinda lost: What should I do? Send a support question to lenovo/IBM EC? Contact my retailer? Are these common problems? I'm also not sure about my warranty. The Lenovo Solution Center says, I still have warranty. The different parts of the website say different things. I'll assume worst case: My warranty is likely expired. I tried:Fresh Installation Windows 8.1, newest drivers, newest Wacom drivers. Tried different settings. Calibration, Pressure Curves, all the stuff. Have 3 different Pens. Searched google, searches this forum... Problems:Massive Ghosting, I know, there is a solution on the forum. It says to replace the old screen with a newer model, but is this possible if the warranty is expired?Calibration is a mess! The digitizer point wobbles under the pen, this is most obvious near the screen border, where straight lines turn into curves. But it's also an issue in the middle of the screen. In some places the cursor is 2mm top left of the actual pen tip, in other places it's bottom right UNDER the pen. I tried all kinds of calibration already... I know about a "dead spot" issue, but this was fixed with a firmware update and my issue is all over the place, not just one spot.The screen is not very solid. Even medium pressure with the pen leads to dark and light display glitches near the tip. Pen press... Read more

Answer:TP Yoga numerous issues with screen and digitizer

I did some more testing with the maximum pressure issue. And it might be related to the pressure level of pens. As far as I know the Yoga supports 1024 levels. I have a new Wacom PL-900 and it has only 512, and the pressure problem is strongest. It is the same with the original Yoga pen, I'd say - even though this should have 1024 levels? But with an old Samsung Series 7 pen I need to press harder to reach 100% pressure - although it is still not really "hard". I'm not entirely sure how many pressure levels the Samsung Slate pen has, thought it was 510, but have seen some reviews mentioning 1024...Anyway, I posted this issue in the wacom forums.

2 more replies
Relevance 50.84%

I have a T410s (2912) with a muti-touch screen running Windows 7 Enterprise - it works very well for finger gestures and such. But I'd really like to use a pen instead of my thick, sausage-sized finger. Is that possible?  A standard pencil or BIC ball-point pen has no effect when it is pressed to the screen. I called into Lenovo Support and eventually was told - nope - only your finger. Can I purchase a special "Digitizer pen" such as those for the Tablet PCs?  Or is the human finger the only input method on this screen? Thanks,JeffR













Solved!

Go to Solution.

Answer:Is there any way to use a Digitizer Pen on a T410s multi-touch screen?

You need a special stylus for a capacitive touchscreen. Search for "iphone pen" or some-such.

3 more replies
Relevance 50.84%

I would like to eliminate my HP Envy-23 d044 Touchsmart capability, I know how to disable it in Device Manager, but i would prefer something more permanent. My first question: is it possible to disconnect one of the TouchScreens, Digitizer Board ribbion cables, and still have LCD video function? My second question is: if so, where is the Board located in the PC housing?   The HP part number is as follows: (P/N:687534-001) Thanks for everyone help! Phillip

More replies
Relevance 50.84%

Hi, I have just finished installing my Nokia Lumia 520 Digitizer but I have few problems with it. The digitizer works but if I switch my phone of and start it up again it stops working and I have to factory reset it by using the buttons to make it work again.
Could someone please explain me why my digitizer stop working if I switch of my phone. I've been with the charger in my pocket all time now to make sure that it doesn't run out of battery.

More replies
Relevance 50.84%

I need to replace my touch screen glass as it is broken. Mine is 2C version of it. There are people selling universal versions of touch digitizer online saying its compatible and original with Microsoft name on the top of it. I want to know how many versions of it are there in the market and which one is MS genuine product. or Are universal one's compatible and works fine with my device ? Also where can i buy a genuine MS Touch screen digitizer for Lumia 535 online india ?

Answer:Touch screen digitizer Microsoft Lumia 535

Be wary on line. You get what you pay for. A lot of them, even if they say Microsoft on them, aren't OEM, just Chinese knock offs. Also when replacing digitizer on the 535 you can't just change it and it works. It didn't for me and I had to 'dead' flash it. A Microsoft service centre can replace it, but, for the cost if replacement, why not plump for something like the 550? At least you will then have 4G LTE device and a more up to date chipset, or the great 640, or even a Blu Win HD LTE?

more replies
Relevance 50.84%

Hello, I bought my Yoga 260 to use on training courses where I write most of the day on-screen with the active digitizer pen. But, my hand leaves lots of marks on the document becuase the screen thinks when you are resting your hand on it that you want to draw there.  The older tabletPCs didn't have this problem.  I can't use the unit for the intended purpose because of this, i still have to use my old tabletPC. How can I turn off the touch feature, so the screen only recognizes the pen? Thank you

More replies
Relevance 50.84%

I dropped my lumia 830 and it cracked the screen pretty badly. I ordered an have the replacement screen with the digitizer, however I can find videos galore for every phone but the 830. Any help is welcomed.

Answer:Has anyone replaced a screen and digitizer for the nokia lumia 830?

Hello, this is mostly because the 830 is still relatively new.. After a quick search I found this vid (Does not show how to replace anything, but does show you how to disassemble the phone):

10 more replies
Relevance 50.02%

I need to replace my screen and digitzer.  My computer guy who has done screen repairs for me in the past says he can find the LCD for my U530, but he cannot located a glass digitzer for it.  Does anyone have any ideas where I can purchase one?  Will Lenova sell me one?   I can't find anywhere to order this part from their website.  Any help pointing me in the right direction would be greatly appreciated.  Mike

More replies
Relevance 50.02%

Please can someone help me?? I have a Microsoft lumia 535 and cracked the touch screen, being a little tight on money I decided to order a new screen along with phone tool kit and have a go myself... Following online video sourced from YouTube I carefully dismantled the phone and replaced screen have triple checked everything is seated properly and ribbon cable is connected correctly... Booted phone up and nothing! Screen is genuine... Looking on Google have found info on something called 'Nokia phone suite', with info stating a 'dead flash' is required after installing new screen for it to work although I'm not sure how accurate this info is nor have I yet attempted it as every time I try and download the programe my anti virus and firewall go nuts!!! Anyway please can someone tell me what to do really need my phone back!!! And just to confirm cracked screen still picked up some touch but not enough to use phone whereas new screen does absolutely nothing! :( :(
Thanks in advance for any help!!

More replies
Relevance 50.02%

Good day. I purchased a manufacturer refurbished ThinkPad X220t  with warranty for one year. The laptop came with a factory seal. When I turn on a notebook,  the operating system(win 7 Prof 64bit) automatically install. At the end of installation in device manager  all devices have been identified and worked fine.  But in computer details in the "system" was written ?No Pen or Touch Input is available for this display?. Then I installed all the drivers on a laptop from Lenovo website again and again. That did not help. Then I reinstalled windows (win 7 Prof 32bit). That did not help. Previously, I had two X200t and when I installed windows 7, the digitizer immediately was detected, for the good work of  the touchscreen it was necessary to install drivers. But the situation with the X220 for me incomprehensible. Explain what I did wrong. The type of ThinkPad printed on the back label is 4294-CTR(in BIOS the type is 4294-CTO).

Answer:X220 Tablet. Not working digitizer and touch screen. Help!

Try to install manually Multitouch Driver from Lenovo Drivers Download  You can find it here: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS001408 V.

5 more replies
Relevance 50.02%

I have a problem witmy x220 (model 4294) whereby the digitizer will start dragging icons on the desktop before it's even touched the screen. It's really annoying and makes the digitizer unusuable. The multitouch with fingers works fine. Any ideas? Thanks

Answer:Digitizer starts double clicking before touching the screen

hey marko_dreer,try uninstalling the pen driver and then install the following twohttp://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013724Also head over to >> http://support.lenovo.com and update your unit as well.





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

9 more replies
Relevance 50.02%

Hello all, apologies if this is a duplicate issue, but my searches did not turn anything up. I just received my new TPY a couple of days ago and have been happily installing software. Today was the first time I really tried using my digitizer pen, as I finally had time to open Photoshop and Illustrator. In doing so, however, I discovered pen calibration is completely messed up for the top edge of the screen. I tested it outside of the Adobe programs and the same problems occur there. I have already gone in and tried recalibrating my pen more than once using the calibration tools in the Control Panel. Is this a known issue that I just need a driver update for or is this a hardware issue? Any help is appreciated. Thanks,Erika

More replies
Relevance 50.02%

I've searched the Lenovo site and can not find the replacement part number for my laptop (Flex 3-1580, Model 0007US, Machine Type 80R4, SN R90HAFJB) digitizer screen.  Can anyone provide me with a link to the part needed and a video/pdf on how to do the replacement? Thanks 

Answer:Lenovo Flex 3-1580 digitizer screen replacement

Hi there, the part number for the digitizer assembly is 5D10K42174, here's one on eBay; http://www.ebay.com/itm/5D10K42174-Lenovo-Flex-15-6-FHD-LED-LCD-Touch-Screen-Glass-Digitizer-Assembl...
 
Refer to the HMM (pg 59) for instructions on replacing the screen: https://download.lenovo.com/consumer/mobiles_pub/lenovo_flex_3_1480_flex_3_1580_hmm_201509.pdf
 
Plus, here's service training videos: http://lenovolearning.bhivesoft.com/bhive/t/1004/course_launch_frame.jsp?id=8173
 
 

1 more replies
Relevance 50.02%

After the install, the Acer logo appears then after about 8 seconds there are a couple lines then it goes blank. Any suggestions??

Answer:Replaced my Aspire V5-573P touch screen digitizer

If you have or can get a remote display, connect it and see if you get good picture on it.You may have damaged the ribbon cable. They are pretty fragile. You might open it up where you can gently  wiggle the cable while it's on and see if it changes.

1 more replies
Relevance 50.02%

Hi

When I turn the display off, the touchscreen and digitizer are still enabled, so, if I touch the screen, the display comes back on. Any way to solve this?

Also, not sure if related, if I turn the screen off and leave it overnight, the battery drops by 25-30% in about 8 hours. Same thing happens when I leave the screen turned off for a short period of time, the battery just doesn't last. Not sure if its because the touchscreen and digitizer are still on.

P.S. Running on upgraded Windows 10 64bit.

More replies
Relevance 49.61%

I dropped my laptop the other day. In the process of trying to get the screen back togerther I think I broke the digitizer. Are there any tips on getting the screen to snap back together until I recaive a replacement digitizer? The right side of my screen does not seem to want to snap back together like previous laptops I have owned













Solved!

Go to Solution.

Answer:Dropped Laptop, Flex-2 15, screen won't go back together/broken digitizer

Welcome to the Lenovo Community !
 
I'm not an owner of your model, but it would appear to me if the screen is not snapping back into place there might be something misaligned or possibly a broken piece of plastic preventing it.  To correct the problem you might have to do a little disassembly to find the cause.  
 
For your reference I have listed below links to your model's Hardware Maintenance Manual and a Lenovo Training video series.  You might find that information useful in trying to correct the problem
 
 
https://download.lenovo.com/consumer/mobiles_pub/lenovo_flex_2_14_flex_2_14d_flex_2_15_flex_2_15d_hm...
 
 
https://www.lenovoservicetraining.com/showcase?sid=482&key=TGVuZw==

1 more replies
Relevance 49.61%

My duaghter cracked the digitizer glass on her laptop, but it still works fine after disabling the touchscreen. I know I can buy another digitizer glass and replace it, but if the lcd itself is still functional can you just remove the cracked glass and use it as a non-touchscreen laptop?

More replies
Relevance 49.61%

How's the quality of this kind of products?
My father broke the screen of his 930 which costs a lot of money to replace, since the outer screen is the only broken part, we thought of this....

More replies
Relevance 49.2%

I have a X201 Tablet had always worked well.Yesterday suddenly the screen became completely black.I connected to the external LCD monitor and the computer works perfectly.But the internal monitor not. At least as a monitor.I can not see anything in the screen not even in backlight.But I can use the digitizer on screen... Namely if I touch the screen with the pen it makes me mouse. It seems strange because I was convinced it was a matter of cables.What can it be?Should be the illuminator? I think not, because in this case should be seen vaguely. Is that correct?Then I thought, or the display itself or cables that connect to the main board?I opened but everything seems to be ok. What is more likely is.I would like to understand it before you buy spare parts useless.How can I test which of the components is?I hope someone can help me,Thanks in advance

More replies
Relevance 45.1%

After some frustration trying to figure out why my digitizer/pen suddenly stopped working in slate mode, I've determined that if the screen is turned 180 degrees counter clockwise (left) the digitizer/pen stops working, regardless of the tilt of the screen.  It works fine in any other position, including 180 degrees clockwise (right).  If you're having issues try out the other direction. Is this likely to be a problem with the hinge or a software issue? (windows 7 pro x64) I havn't had this problem before, and although its likely that I favour rotating the screen one way, I would have (probably) noticed it by now.  It seems like it has appeared in the last few days. I've used system restore to roll back to my virgin Windows 7 + office installation, and it hasn't solved the problem -- but system restore isn't perfect.  I'm loathesome to restore an image of the machine in that state or reinstall Windows 7 until later this month when school calms down since it does work one way. I've tried reinstalling all of the tablet associated lenovo downloads (buttons, shortcut menu...).  Any other thoughts? 

More replies
Relevance 38.13%
Question: digitizer pen

I have just recently bought an i7 Lenovo Yoga pro 2. As many of you may know, it does not come with a digitizer pen. I would like to purchase one but I am not sure what to get. Please help me with suggestions.

Answer:digitizer pen

Good afternoon and welcome to the community.
 
The Yoga 2 Pro doesn't have a digitizer. The panel is 10-finger capacitive touch. That said, there are a number of capacitive stylii available, but I don't have experience with them , so I can't offer a recommendation.
 
Hopefully other members will join the discussion with their experiences that will aid your decision.
 
Cheers.

1 more replies
Relevance 38.13%
Question: X60 Digitizer Pen

I have posted before about my recently acquired X60T having a gap all round between the screen and the bezel. This is making me very, very nervous about the use of the pen with Windows 8, because of the sharp glass edge that the pen needs to move across. The pen that came with the machine has no Lenovo part number, but it seems to work well. I ordered a cheap spare pen with spare nibs from ebay. It also has no part number, although the advert said"IBM LENOVO ThinkPad X60 X61 X200 X201 W700 Tablet Digitizer STYLUS PEN 39T7481" The pen shown in the advert has a grey piece at the rubber (as opposed to the nib) end, as does the pen that came with the tablet, but the ebay pen that came has a red rubber end. When I move this pen round on the screen, a spot moves under it, and it highlights things, but I cannot make it click anything. Similarly it won't draw in Paint like the older pen. Is it faulty, or is it a different type of pen? I am trying a possible fix found elsewhere on the net, of removing the nib and lying it on its side for 24 hours. What I really need to know id whether I need to replace the screen bezel or whether there is some magic gunge i can use to fill the gap. 

Answer:X60 Digitizer Pen

Billaboard wrote:I I am trying a possible fix found elsewhere on the net, of removing the nib and lying it on its side for 24 hours. What I really need to know id whether I need to replace the screen bezel or whether there is some magic gunge i can use to fill the gap. Followup: Well, the magic voodoo of lying the new pen on its side with the nib removed, as expected, achieved nothing. The pen supplier hasn't yet replied, although it's early days, and thescreen bezel is still a problem. An additional slightly odd problem is that the Windows 8 pen calibration utility seems to throw the pen calibration off rather than improve it. I am holding the pen vertical to do this. Do I have to accept that pen actions are flaky with an older machine like this and Win8. The machine is otherwise extremely good for doing what I want - controlling a graphics intensive audio program - and seems far more suitable than my son's newish touch screen Acer Win8 converible device.   

2 more replies
Relevance 38.13%
Question: Digitizer Pen

Can someone please tell me ALL of the uses of the digitizer pen...

Answer:Digitizer Pen

All the uses of a mouse combined with all the uses of a erasable writing pen.





Full disclosure: Not a Lenovo employee, just someone with a X61 running Win XP SP2

5 more replies
Relevance 38.13%

Hello, I just got my new X230T and I can't find how to use the digitizer pen.Is it possible to directly write on word or on a PDF?This video shows that we can configure the pen but i have no idea where!http://www.youtube.com/watch?v=Dy1bg7jRiAE I also heard about the Lenovo Think Vantage Tool Box. Where can I download it? If someone can help me, i would appreciate.  Lenovo X230T with Windows 8 64bits













Solved!

Go to Solution.

Answer:How to use digitizer pen

thinkvantage toolbox...it shouldve came preinstalled in your system. you can check support.lenovo.com and look at the driver downloads, however, im not sure if they phased out that program. the program that the guy was using on youtube is called windows journal. but other programs that you can directly write on are outlook office (however, only outlook to outlook office users can see each others drawings), microsoft office one note, microsoft word, and grahl pdf annotator. personally, i use grahl pdf annotator and one note the most for school

3 more replies
Relevance 38.13%
Question: Digitizer PEN ?

Hi, I have a ThinkPad model SL410 and wonder if it supports a digitaizer pen that would data input instead of a keyboard (input).   Have looked at the Lenovo's specs for SL410.  It did not come across as such.  But it seems that pen input technology should be picking up now....  idea / thoughts / info / pointer ? Thanks.  

Answer:Digitizer PEN ?

Hi,I've been using a Wacom Intuos3 tablet (digitizer tablet/pen/mouse) with my Thinkpad SL300 (Vista Business) for over six months, and I have yet to encounter any issues with the hardware, software, or drivers.    Even when alternating between the pen and Microsoft  wireless keyboard and mouse accessories, my computer has yet to slow down or shut down on me.  The Tablet PC Input Panel of  Windows XP/Vista/7 makes the pen work with pretty much any application for more info, go here: http://msdn.microsoft.com/en-us/library/ms818563.aspx .I recommend checking out Wacom's website to see what kinds of requirements exist for some of the products out on the market now ( http://www.wacom.com/index2.php ).  I hope that this helps!  Good luck! -Meg

3 more replies
Relevance 38.13%

Hi there, I have an X61 tablet, 7767 A4U, and want to buy a new digitizer pen. I come to ask if I can use a X41 or any other digitizer in my touch-laptop? By the way, can I make my screen finger-touchable, just through updating the software? My computer is only penable now, not for finger-touch. Thanks.Xiaodong





-----------------------------------------------------------------------------TPs own: X31 (2003), X61T, X200T, Tablet 2, P50 (2016); Win 7/8.1/10, Ubuntu8.04-16.04.

Answer:What digitizer can I use?

i believe an x41 pen will work but it probably won't fit in your holder and the eraser won't work. a gateway m275 pen will also work but again no eraser and it probably won't fit the holder.  i'm using an x41 pen in a gateway m275 tablet and it works fine. check in device manager under human interface devices and see if there is anything listed like, touch panel driver or HID-wacf008 or Gunze. not all x61's came with multi-touch screens.  from what i understand the viewing quality of the multi-touch is less than the pen version. probably because of the extra layer on the screen.  if you had multi-touch it would respond to your finger. 

9 more replies
Relevance 37.72%

Unfortunately my digitizer broke after falling 2 foot! I bought one from eBay making sure I got the right one (apparently there are 2 versions mine is the newest) and it's so unresponsive. Can anyone tell me a good uk online store to get a replacement? Many thanks

More replies
Relevance 37.72%
Question: digitizer pens

Can a Cross Pen/Stylus be used as the digitizer pen on the X61 Tablet?  Vista is the OS.

Answer:digitizer pens

Any Wacom Penabled stylus will work on the X61T.

1 more replies
Relevance 37.72%

I have a x220i tablet. I lost my digitizer pen and ordered a new one from ebay. However, it is not working like it is supposed to. I have another digitizer pen from my Samsung Note that works fine but the new one I ordered from ebay isn't. I would like to know if the digitizer pen the seller sent me is for an older lenovo tablet version? Is an older digitizer pen compatible with newer tablet versions like the x220? Any other help will be appreciated.thanks,













Solved!

Go to Solution.

Answer:Digitizer Pen Issue

toocerebral wrote: I would like to know if the digitizer pen the seller sent me is for an older lenovo tablet version? Is an older digitizer pen compatible with newer tablet versions like the x220?I think some are - those for the X60 definitely work on the X220T. Yours might be a copy? If it has the Lenovo P/N 0B42547 you should be good. I've seen these on eBay, so you would expect those to work. If this is the case with the one you bought, could be a faulty pen. Good luck.

2 more replies
Relevance 37.72%

I want to replace my Lumia 730's digitizer, since it's broken. I found one on aliexpress but I'm not sure it's gonna work. I don't see any connectors. Can someone help please?Online Shop One pcs High Quality Black Outer Front Glass Lens Repair Parts For Nokia Lumia 730 LCD Screen Digitizer Pannel Replacement+Tools|Aliexpress Mobile

Answer:Replacing my 730's digitizer

There is a connector on the top right hand side.(the picture in the link you provided)
are you replacing it by yourself ? (better get it done by a professional)
because its not that easy.
the display and the touch panel is a single unit, glued on by Liquid Optically Clear Adhesive.
In the OEM version display and touchpanel comes as a single unit.
However if you manage to seperate the display and touchpanel you can use what you showed in the link.
I know this because ive had the same experience with my Nexus 7 . I ended up replacing the whole display unit.
Make sure you get the OEM one, because it is uncertain that other touchpanels available online are guaranteed to work properly, with your device.
The best option is to get it to a mobile repair shop if you have one nearby, they will get it working for you.

4 more replies
Relevance 37.72%

Is it possible to put a screen with the digitizer built in and install it in a yoga that did not originally come with a digitizer? I've got a 20CD-0032US  and was hoping a screen swap would be able to add the capability. Thanks

More replies
Relevance 37.72%

I am having trouble with my XP X60 stylus.  When converting to tablet mode, the cursor freezes and the pen is nonfunctional.   Will work if not completely latched in.  Has anyone else had this same problem?  Lenovo experts do not know.

Answer:Digitizer pen problem X60

I would re-install the drivers for the screen/pen! It could also be the cable going to the "wacom". When you switch modes see if you get an "!" in yellow under your computer hardware. 





Currently own: X220T, X201, X200, T61 X2, X61T X3

2 more replies
Relevance 37.72%
Question: Digitizer assembly

I am looking for a replacement digitizer assembly for an HP Pavillion model 13-a 010dx.The assembly model is CT: SEEFA01EN7C4C0 Does anyone know if there are models that are interchangeable? or a good site to find that isn't more than a new laptop?  Thanks for your time. 

Answer:Digitizer assembly

Hi,Manual: http://h10032.www1.hp.com/ctg/Manual/c04580734Your laptop came with 13.3-in (1368×768), AntiGlare,high-definition (HD), light-emitting diode (LED), low-voltage differntial-signalling (LVDS), WUXGA, TouchScreen with flush glass and MultiTouch enabled; 16:9 ultra-wide aspect ratio; typical brightness: 200 nits; ultraslim (2.5-mm)�.It comes a Display panel 13.3-in, AG, HD, WLED, TouchScreen (includes display bezel) with HP part number 768042-001�.HP sells it at $275 :https://parts.hp.com/hpparts/Search_Results.aspx?mscssid=D3ABDB212B414240A7599CFE28B3FAFB&SearchIn=P...You could search in 3rd party online sellers with the part number, proceed if it's cheaper after confirming genuineness, details and part.RegardsVisruth

1 more replies
Relevance 37.72%
Question: Yoga 910 Digitizer

I bought a Yoga 910, as I found out, it doesn't support active pens.  I see on a few sites they sell the display assembly.  https://www.amazon.com/910-14IKB-910-14ISK-Digitizer-Display-Assembly/dp/B071JV7R17 I wanted to know are these screens legit?  It was marketed without active support, but do they sell the screens with the digitizers in them seperately now?

Answer:Yoga 910 Digitizer

That just looks like a replacement screen for the 910, no different to the one that comes with the laptop - it doesn't have a pen digitizer.

1 more replies
Relevance 37.72%

Hello, I have some problems with the configuration of the digitzerIn the the welcome Windows i can't get the right click with the pen to work to access all the applications.I press it, a round appears arround the edge of the pen on the screen but nothing. Could someone help me for that please? Cheers Vincent

More replies
Relevance 37.72%

Hello, my Lenovo yoga 13 display is broken (just digitizer, not the whole display, LCD and everything other inside is ok) and I'm looking for new. On ebay and other public stores, I found only whole display or lot of digitizers for yoga 11 but not for 13. Is there another way how to get new digitizer without buying the whole display? On repair service, they want 11 000 CZK (about 650$) for replacement but they want to replace the whole display, which is not necessary in my case. Thanks to all for reply

Answer:Digitizer for Yoga 13

Good luck on your search! I broke my screen a little while ago on my yoga 13, and it was $300 usd for a new screen, but now I'm getting weird errors with it. Best of luck, please follow up if you find a solution since it's helpful for others!

2 more replies
Relevance 37.72%

Is the new x2 10-p008nl equipped with an active digitizer, as its older versions were?I'm talking about this product: http://www8.hp.com/h20195/v2/GetPDF.aspx/c05266725.pdf

More replies
Relevance 37.72%
Question: HP X360 digitizer

Hello,I'd like to know if this version of the HP SPECTRE X360 included the digitizer. Ty for your help.The model is: HP Spectre x360 13-4158ng.

More replies
Relevance 37.72%
Question: Cracked Digitizer

Hi everyone,
 
It seems i've cracked the digitizer on my laptop and now the touch function doesn't work properly. While the display still works fine there's a giant crack across the screen and it's really annoying. I had to disable the touch via Hardware Manager because it was really going haywire.
 
I keep trying to call the support number, 1.866.724.8600, (removed content) but the machine keeps telling me that it " can't connect me to anybody."

I don't understand. How can I get ahold of someone at HP so I can get this fixed?

Answer:Cracked Digitizer

Hi @NewJerZ,Thanks for becoming a member of the HP Support Forums. I understand you are having an issue with the touch screen. I will be glad to help you. The number you mentioned is not a HP phone number. If you are in warrenty, please use the following http://www.hp.com/contacthp and create a case for your issue and contact HP. If you live outside the US/Canada, please click the link below to get the contact information for your region.http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html If you are not in warraty you can order both parts from HP Part Surfer.Per Page 15 per Maintenance and Service Guide,  Display Panel Kit part number 788608-001 and  Touch control board part number 788606-001 Please keep me informed of how things went. If you require further assistance, let me know and I will gladly do all I can to help you.Please let me know if this resolves the issue by marking this post as "Accept as Solution".To simply say thanks, click the Thumbs up below!  Thanks.

1 more replies
Relevance 37.72%

I had a the computer on my car seat and it slid forward and hit the floor. it broke a piece off the bezel on the front. I am trying to find either that bezel or if need be the entire digitizer since it appears to be one piece. I have not had any luck finding it. any suggestion for me to get this part? also I have not found any good instructions on how to DYI this project. again suggestions would be appreciated. Thanks 

More replies
Relevance 37.72%

I have a Thinkpad X1 Yoga (1st) and the included pen was wokring fine until about few days ago. May have been after a lenovo or widows update. Now on a webpage the pen works as a scroller (like finger touch), and the drag feature (highlight, select/click and drag) doesn't work anymore. On windows office, the pen would automatically be set to draw. I figured out how to undo this, but there is no way I can find to make this the default. Every time I open Word it will be back to draw. No luck with trying to change the settings for the touch/pen.  Any help is appreciated.   

More replies
Relevance 37.72%

Hi evreyone,i have a Lenovo X41 Tablet and i'm looking for to buy related digitizer pen, because the original is broken.After an internet search i found that the X41 pen is out of production, then is impossible to get it.My question is: exists some universal (NOT "Lenovo") pen that is compatible and that i can use with my X41? Thanks.Paolo.  

Answer:X41, alternative digitizer PEN

Hi andromeda35, and welcome to the Lenovo User Community!
 
Lenovo spare parts are available through IBM in Europe. There is no online store in Italy, but there is a phone sales line. I checked the French online store and the pens are available (part 39T7303).

2 more replies
Relevance 37.72%
Question: Cracked Digitizer

Hello, I have a Ideapad S415  with a cracked screen. The digitizer has lost all of its functionality but the LCD still works. There is still a little bit of discolouration when the screen is moved/tilted at certain angles. I would like to get this repaired but don't know where to start. Has anyone else experienced something like this? If so, was the entire screen replaced or just the one part, and how much was the repair? Thanks

Answer:Cracked Digitizer

Hi Rruiz,
 
Welcome to Lenovo Community!
 
I?m sorry to hear about the situation and understand your concern. ), I would strongly suggest you to contact our Technical Support for further Assistance to get the details of the nearest Authorized Service Center to get the issue analyzed and to get the information about the relevant part that needs to replaced to get this issue resolved also the cost of repair.
 
Click here to open a link where you can select the country and get the exact contact support number. I?m sure they will be a great help.
 
Do post us back for further queries.
 
Best Regards

Shiva Kumar






Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 37.72%

I know that this comes with a 10 point touch digitizer but I was woundering if there was anyway i could install say a walcom digitizer for my computer which is an Aspire S7. Do they make active digitizers for this or could i install an aftermarket one?

More replies
Relevance 37.72%

I have a Thinkpad X41 Tablet and my digitizer pen is stuck in the computer and won't release.  Does anyone know how to solve this problem.

Answer:Tablet Digitizer Pen

It depends on where it is stuck.  Sometimes you can separate the keyboard bezel from the lower case, just slightly, and the pen will come out.  You can also use tweezers to see if you can grap the pen clip and pull it out.

1 more replies
Relevance 37.72%

I just got a new W701 without the digitizer pad even though where I bought the product had displayed on a image in the website with the digi pad on it. See the link below:http://uk.insight.com/p/LENYA06TCV/lenovo-thinkpad-w701-2500-core-i7-720qm-16.html I really wanted the digi pad with it. I didn't even know W701 came without the digi pad. Did anyone else had this problem?

Answer:New W701 did not come with the digitizer Pad?!

Hello Nags, welcome as our 75.000th forum member!
 
Unfortunately, when you look at the specs on the website you´re referring to, this model hasn´t a digitizer pad.
 
The mentioned input devices are: Keyboard, TrackPoint, UltraNav
 
I would contact the reseller about this problem.

2 more replies
Relevance 37.72%

Hello all.Sorry if this has been covered elswhere, but I couldn't find info on it anywhere. Does anyone know, if I order a W700 with just the pantone calibrator and fingerprint scanner, and NOT the wacom digitizer, will it still have an 'empty/non-functioning' digitizer section as part of the case, and a hole in the side for the pen? I already own a full size tablet which I'll be using with the machine, and I'd find it aesthetically annoying to still have the non functioning parts built into the case. I'd appreciate any info, especially any links to pics of w700 models without digitiser sections in the case (if they exist)Thanks alot.jesse.

Answer:W700 Without Digitizer

I do not know Lenovos manufacturing practices, I am expecting delivey of my first lenovo, a w700ds very soon!! But according to the thinkpad w700/w700ds hardware maintenance manual (downloadable from the lenovo website), there is 3 specific part numbers for,... 44C9504 - Palm rest assembly with fingerprint reader44C9505 - Palm rest assembly with fingerprint reader and color sensor44C9506 - Palm rest assembly with fingerprint reader, colorsensor, and digitizerSo as a very good guess, I would expect Lenovo to configure your machine without a redundant digitizer. Especially since they are known for build quality. I hope this helps,argh

3 more replies
Relevance 37.72%

Can anybody give any information for any Digitizer pens that work on this laptop ? Cheers

Answer:Yoga 700 14" -Digitizer

Will a "ThinkPad Yoga Pen" work ??

8 more replies
Relevance 37.72%

Hallo, I own a x61tablet with 223 days of warranty left.A few weeks ago the "right-click" button on my digitizer pen broke and is probably still stuck inside the pen holder device.I couldn't verify this because I do not want to open it myself due to the warranty restrictions.However the drop-out mechanism of the penholder does still hold the pen but won't release is properly.Now there is a possibility, that the "right-click" button got lost a long time ago and that the created gap on the pen is responsible for the jam inside the holder.Is there a way to just get the pen fixed without sending in the whole tablet?I need it every day.

Answer:Broken digitizer pen!

you can ask for a replacement pen, but can that solve your problem?

1 more replies
Relevance 37.72%

Does somebody know a place/site(in India) where I can buy a good digitizer for my Lumia 520, which I broke last week. Any other tip is also welcome.

More replies
Relevance 37.72%

Just to be clear, this is the laptop that I have. I need a pen for it. Any pen at all. Does one exist? Every single pen I've found, people say it doesn't work with this specific laptop. I have friends with lenovo laptops and I've tried their pens on mine and it doesn't work. My finger works fine, but I can't take notes in class like that. I have a pen that works on my iPad, but I don't really like it. I tried it on the Yoga, and it did work, but it was downright terrible. It only picked up about half the time. Lenovo has a thinkpad yoga pen on their website, but I'm quite positive that won't work with this model. So is there anywhere I can a suitable pen? Thanks.

Answer:Yoga 3 14 Digitizer Pen

The yoga 3 14 does NOT have a digitizer layer under the LCD panel. Which means NO digitizer pen will ever work with it. Trust me, im typing from my yoga 3 14 now. The 14" Thinkpad yoga does however suppport pen input. Your only option for a pen is one of those capacative pens with a rubber tip.

1 more replies
Relevance 37.72%
Question: Helix Digitizer

How do I determine if my Helix came with a Digitizer? It came with the pen, but the pen does not work at all. The touch screen works fine and all drivers and software have been installed. The pen does nothing when put up to the touch screen. I am trying to determine if there is a hardware issue or simply the hardware does not exist.

Answer:Helix Digitizer

can you plug the pen into the pen silo? Also what is your full model number (or MTM) on the Helix?

4 more replies
Relevance 36.9%

I tried calibrating the digitizer on the X230t but for some reason there is always one side of the screen (on the edges) that the digitzer seems way off (more than half an inch). I never had this problem on my Fujitsu tablet PC before or after calibration so I wanted to know if that was normal. I noticed this only happens when the laptop is in tablet mode and not when it's in the standard laptop mode.

Answer:X230t digitizer performance?

Try the Kvirtanen (one of the forum users) method for the x220t (ignore step one) : I updated the FW of the digitizer. Download the utility here: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/fwdigi01.exe I installed the Wacom ISD Tablet driver, v. 701_8int, from here: ftp://ftp.wacom-europe.com/pub/WINDOWS/isd701-8_int.exeI restarted the computerI hit Start, wrote 'calibrate' and chose Calibrate the screen for pen and touch inputI hit Reset on the next window (for both pen AND touch, to be sure), and then clicked OKI started the Command Prompt as an Administrator and ran the following command:tabcal lincal novalidate XGridPts=5,16,60,165,258,640,922,1115,1220,1264,1350 YGridPts=5,12,39,105,225,400,575,695,761 Hope that it works.

9 more replies
Relevance 36.9%

Hi, After working out that my laptop (Thinkpad Yoga S1) most likely has a digitizer, I purchased a pen for it. However, since I wasn't 100% sure, I bought a cheaper, off-brand pen that people said was compatible, the listing for which can be found here. I received it today, but my computer seems unresponsive when I try to use it. When I went to Wacom Pen or Pen and Touch Input, the pen calibration screens were either blank (Wacom) or didn't load (Input). Is there something else I have to do to make my pen work? Did I purchase the wrong pen? If it helps, the pen slot on my computer is still plugged; I was going to unplug it, but to do so I'd have to remove the back paneling, and one of the screws keeping it in place has been stripped. The thread confirming that my laptop has a digitizer is here.Thanks!

Answer:Thinkpad Yoga digitizer pen

Hi
 
Please notice that this is my personal opinon and it does not mean I'm 100% right, this is based on my experience.
 
I think that the "Digitizer PEN for Lenovo ThinkPad X60 X61 X200 X201" is for older Thinkpad models. I have a Thinkpad Yoga 14 (Similar to S1) (20DM008UUS) and it has a digitizer screen, but it requires an "active pen" (with batteries inside) to be able to work with the digitizer.
 
I have the Thinkpad Pen Pro and it works fine with my model. I still think you have a digitizer on your laptop but I think it is the wrong pen.
 
Here it also some more info about the pen that Amy wrote.
 
Regards.

3 more replies
Relevance 36.9%

Is there a list available showing some the applications for which the Wacom digitizer pad on the W701 can serve as an input device?

More replies
Relevance 36.9%

I just got a Yoga S1 with the Digitizer Pen.  Is the pen supposed to behave similar to a standard touch?  In otherwords, can I use it instead of my finger when touching the screen?  So far it doesn't seem to have any affect on the windows start screen.  I know the pen works because I found an app that translates the writing to text (can't remember the app name, still learning what came on the computer).  I'm just trying to learn the capabilities and limitations of the pen. Thanks in advance













Solved!

Go to Solution.

Answer:Yoga S1 Digitizer Pen Question

The digitiser pen works like a simple finger touch. When you click on the button on the pen, does it open a dialogue box?

5 more replies
Relevance 36.9%

I mistakenly bought my Thinkpad Yoga thinking that it had a digitizer included because it was a 1920x1080 screen, and there is no option available for it on the website to have a FHD screen and no digitizer. I bought refurbished from a 3rd party unfortunately, so returning it more trouble than it is worth. Is it possible to send into Lenovo for service to get a screen with a digitizer installed or is the digitizer actually dependent on the motherboard it ships with? If lenovo wouldn't do it and it is possible, I would definitely wait to buy a part on ebay and do it myself. Very disaapointing why they would have any model without a digitizer, it is absolutely useless as a tablet without it. :-(













Solved!

Go to Solution.

Answer:Can you switch monitors to one with a digitizer?

Lenovo can't swap your parts and upgrade it to the digitiser enabled version. So you have to do it on your own, or find third parties to do it for you. The digitiser support is not dependent on the motherboard. It is dependent on the LCD you install (digitiser layer is directly bonded to the LCD). I haven't done the upgrade myself. From the look of things, you need the FHD with digitiser, a new backcover (19.4 mm), a new display cable with digitiser support, a new hinge kit, etc. There could be more parts.http://download.lenovo.com/parts/ThinkPad/yoga_fru_bom_20131107.pdfhttp://support.lenovo.com/en_AU/detail.page?DocID=UM019563

2 more replies
Relevance 36.9%

Hallo liebe Community Hoffe mir kann einer bei meinem Problem weiterhelfen.Ich habe mir erst kürzlich das Lenovo ThinkPad S1 Yoga gekauft.Hier ist standerdmäßig der Digitalstift dabei. Leider habe ich das Problem das etwas nicht funktioniert.Wenn ich den Stift entnehme, dann wird er sobald ich ihn Richtung Bildschirm bewege erkannt (kleines Kreuz erscheint), sobald ich dann am Bildschirm etwas antippe reagiert nichts. Also keine Auswahl möglich. Habe mit dem Touchscreen sonst keine Probleme, also  Finger funktioniert. Was kann ich noch machen? Habe bereits den Treiber von Wacom installiert und auch den Bildschirmtreiber neu geladen. Bitte um Rat mfg Günther

Answer:Digitizer funktioniert nicht

Abgeschlossen:: Habe den Fehler behoben!!

1 more replies
Relevance 36.9%

Hi, I recently lost my digitizer pen to my touchsmart tm2 notebook, I looked for an exact replacement to this pen but they seem to be out of stock. Are there other digitizer pens that work with my notebook you can recomend? I don't mind buying another brand or another type of pen from HP so as long as it works with my notebook. Plus I don't want to draw with my mouse ( Btw I am an illustrator)

Answer:Best Replacement digitizer pen for my TouchSmart Tm2

@jcarmona1978 
?Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).If you are unfamiliar with the Forum's private messaging please click here to learn more.Thank you,Omar

3 more replies
Relevance 36.9%

hello fellow thinkpad enthusiasts... is anyone else having issues with dust showing up behind your lcd's touchscreen? i am having major issues here... i am also on my fourth replacement screen and from what i have noticed they all have been having this problem, and i am very upset because this looks to be a quality control as well as a design flaw... my first two screens appeared to be brand new and the other two were field service units which im guessing are factory serviced refurbs... just to test i actually kept all 4 and compared them side by side [i should have taken pics, sorry] and they all have had some specs of dust located in the layer between the digitizer and lcd. i am pretty savy and have worked on many different thinkpad models so i am comfortable with servicing my own unit, i have the maxed out i7 / 8gb ram/ 256ssd and i even have the WWAN card with the touch model.. it fits you just need either the antennas and you can run them in the screen yourself which is a pain or you can just get the multi-touch lcd with the antennas already ran from the factory, there are two different fru part #'s for the multi-touch lcd one with WWAN and one with out. i paid for the 3yr on site + battery replacement warranty and lenovo is pretty fast and good about me placing fru's and i must say i am pleased with their customer service outside of my enterprise experience with them in the past 6 years or so. i am just really upset i absolutely love this device... Read more

Answer:X1CT gen 1 - dust behind lcd digitizer

Dust specs within the layers of the LCD are a fairly common problem. You'll have to get Lenovo to replace the panel.
 
Good luck.

9 more replies
Relevance 36.9%

I'm looking for the part number for the glass/digitizer portion of the display for a 17-G series notebook.  The complete display PN is 809300-001.  My LCD appears to be working just fine.   Partsurfer got me this far.

Answer:HP Pavilion Notebook digitizer PN

Hi,It is not spared separately. Touch screen display comes as whole assembly.Manual: http://h10032.www1.hp.com/ctg/Manual/c04655126You try your luck by searching part number online and see if any seller is sparing it separately. No gaurantee that it would work. Confirm with seller genuineness and part.RegardsVisruth

1 more replies
Relevance 36.9%

    I've been using an X60 tablet for several years now, and am used to holding the pen button and then tapping to right click. Is there a way to configure the W700 to work this way? I find it much easier to click accurately. I seem to remember there being a setting for it on my X60, but I can't remember where it is.

Answer:Digitizer right-click button

if you have the wacom driver installed, this setting can be found in the wacom control panel by clicking on the 'options' button.

1 more replies
Relevance 36.9%

Can some one please explain how one uses the Wacom digitizer (I think a drawing tablet althou, as I understand it, you don't draw on the LCD screen) and why or what's it's purpose?  Also, what is the purpose of the calibration and is it used in conjunction with the digitizer and, if so, how? As you can see, I don't really understand the above but I really like the 17" screen and I've had two Thinkpads in the past and love them.  Many thanks in advance. Al

Answer:W700 digitizer and calibration

I have to say, Lenovo really did well with the W700. The build quality is not as good as I expected - seems all thinkpads have gone down on this measurement - but the addition of a proper, quad core mobile workstation to the thinkpad line is very welcome. The calibrator is seperate from the tablet, it measures the screen colours and calibrates accordingly, just like full monitor calibrators. The graphics tablet is a Wacom tablet, a popular drawing tablet used by artists and designers, but built into the palmrest. It is not really for general handwriting like the screen is on a tablet pc. Really, if you have never used these features before, you're unlikely to need them now, so just configure them out when ordering - though the calibrator is cheap enough to keep.

1 more replies
Relevance 36.9%

I am trying to establish if the Lenovo Ideacentre AIO 300 (Desktop) has any digitizer pen (like a stylus pen) that I can use to do delicate graphics like free hand drawing directly on the display screen. Anyone know of anything please let me know.

More replies
Relevance 36.9%

Hello all, I just received a refurbished ThinkPad S1 Yoga from the Lenovo outlet store, and have a problem with the digitizer. When using the pen, there is a zone about 3/4 inch from the top edge of the screen (in laptop mode) where the cursor fails to track properly. When approaching this line from below, the cursor will hover just below the tip of the pen, and then as this line is passed the cursor rapidly accelerates 2-3 milllimeters upwards relative to the pen's tip. I used a ruler to draw some straight lines in fresh paint, highlighting the resulting problem: I've talked with tech support and updated all my drivers and firmware, tried every calibration trick I could find on the web (default, 25 point Wacom, as well as the 100+ point calibration trick), and also tried running the calibration in all orientations - the problem always shows up in the same edge of the screen. At this point I assume that I have a bad digitizer and will need to send the unit in for repair, but figured I should check here before doing so. EDIT: I am still using the included stylus. Is it worth trying to track down a replacement stylus to rule that out as the source of the problem? It would be easy enough, but I can't for the life of me figure out how a defective stylus would result in this behavior.  Thanks for any thoughts

Answer:New S1Yoga Digitizer Woes

This is fairly well documented behavior of Wacom tablets. The extra EM interference near the edges causes erratic behavior.The 100+ point calibration trick helps, but you'll need to adjust the parameters on lincal to add much denser points near the problematic edge.

1 more replies
Relevance 36.9%

I've found a nice combo to make the infamous digitizer on the X220T behave a bit better. This will also enable pressure sensitivity in Adobe programs. It will only apply to one screen orientation at a time. I've updated to the P0006 firmware using Lenovo's firmware update utility. Here's what I did -- I'm just reporting it, I'm not encouraging anyone to do the same (though why not?) I didn't have any Wacom drivers installed prior to this, btw. My system was clean of any Wacom residue   I updated the FW of the digitizer. Download the utility here: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/fwdigi01.exeI installed the Wacom ISD Tablet driver, v. 701_8int, from here: ftp://ftp.wacom-europe.com/pub/WINDOWS/isd701-8_int.exeI restarted the computerI hit Start, wrote 'calibrate' and chose Calibrate the screen for pen and touch inputI hit Reset on the next window (for both pen AND touch, to be sure), and then clicked OKI started the Command Prompt as an Administrator and ran the following command:tabcal lincal novalidate XGridPts=5,16,60,165,258,640,922,1115,1220,1264,1350 YGridPts=5,12,39,105,225,400,575,695,761 It needs to be a single line with no spaces between the values. This brought up a very detailed calibration screen I meticulously went through. It made the screen behave better, but it's only for one orientation at a time. Turning the screen to portrait will not provide optimal results. If you use your tablet exclusively in port... Read more

Answer:X220T digitizer -- my best results so far

That calibration tool did make it much more accurate! The left half of my screen in landscape works very well. I will have to tinker with it more! thanks!

9 more replies
Relevance 36.9%

I'm curious as to why the T410s has a driver for a digitizer.   (Windows 7 64-bit, released 4/26/2010)http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73771 I read some of the forums and people stated that the T410s does not support the digitizer pen (at least one thread from this forum).  Does this mean that the hardware supports it but there was no driver available at the time? Or is this feature going to be available only to future hardware specs?

Answer:Digitizer Driver for T410s?

I did a little more research and it looks like N-trig makes 2 other types of "pen" (n-trig duosense) for touchscreen.  One is a "electrostatic" pen that's not battery operated.  The other type is the "pencil" (battery operated, AAAA). Currently I've only seen the pen version and I dont see it sold by retailers at this time.  I'm not sure if the digitizer pen sold by lenovo is the electrostatic type.  The only place I've seen this pen is at Dell (the one that came with their XT tablet) and it looks like HP does as well.  Fairly recent technology...

1 more replies
Relevance 36.9%

Hello,I have one question, I'm planning to buy thinkpad yoga from online Netherlands... and I'm not sure whether the digitizer is included or not.... its not written anything on the list about digitizer while customizing the product.... does anybody know from where I can buy the correct wacom digitizer which can also fit in the holder of the thinkpad yoga...??? Thankss













Solved!

Go to Solution.

Answer:Digitizer to fit in thinkpad yoga

the wacom digitiser should be bonded to the LCD, and does not come as a separate part. http://support.lenovo.com/en_AU/product-and-parts/detail.page?&DocID=PD029829

1 more replies
Relevance 36.9%

I inserted the digitizer pen for the first time in my helix pad and I could not get it out afterwards. Is there a way to get it out? is anyone else facing the same problem? Thank you

More replies
Relevance 36.9%

I've had my computer nearly a year, and all of a sudden the computer stopped sensing the digitizer today. Any suggestions??? I have had beyond miserable experiences with lenovo's joke of technical support/customer support and would really like to avoid spending the next month trying to get the issue resolved in a series of angy phone calls with them.

Answer:Please help! Digitizer not being sensed by computer!

it randomly started working againa fter an hour

4 more replies
Relevance 36.9%

 HI there I bought Helix (3697 CTO) from a friend of mine who came from Australia I needed it for drawing, graphics designing. But to my surprise there was a cap in place of the stylus I was very confused and decided to open it as per instructions there should be 2 connecters white(digitizer) and black(display/touch) here is the link http://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/Can-I-add-a-pen-to-Helix-if-it-didn-t-c...  I also searched on youtube there are 3 connecters not 2 joining motherboard to lcdhttp://www.youtube.com/watch?v=uN2K3qd82AII am now totally confused if I got touch only or with digitizer  Here is the pic of my helix Link to image

Answer:Helix Digitizer Confustion

UpdateI disconnected the white connecter and turned on the helix the touch stopped working. Does that mean touch and digitizer are connected with same connecter or just the touch? And when i run touch screen update it gives and errorThis update is either not necessary or not applicable to your system

3 more replies
Relevance 36.9%

For some odd reason, I have always desired an active digitizer.  I am not an artist or someone who enjoys drawing or using paint programs.  I am not a doctor or shop foreman who would benefit from being able to write on a tablet as I walk around.  I am honestly never in a situation where I cannot type. And let's face it folks, typing is way way way better than writing.  I can type faster than I write, I can search on what I have typed more accurately, I can read what I have typed a month from now (my handwriting is pretty awful), I barely have to think to type (handwriting takes concentration) and I can copy what I have typed and paste it into other programs.  If I really really need to handwrite something I can use a simple stylus - not great but it works. So WHY do I crave an active digitizer so much so that I have seriously considered trading my Y2P in for a Viao Flip which other than the digitizer is an inferior machine in every way?  It is silly and yet it is there nagging at me.  I could get a Thinkpad Yoga but it is close to $500 more for a similar configuration and I get a worse screen and heavier machine. Does anyone else suffer over this as much as I do?  It is just so silly.  I have owned a Note 10.1, a Note 2 and a Surface Pro, all with the idea I would use the pen and guess what?  Never used it.  Why? Because my handwriting sucks and typing is better. Oh well, would have been nice if Lenov... Read more

Answer:Is having an active digitizer really worth it?

A digitizer display is sensitive to pressure as well I believe. Which makes it suitable for accurate work.Get the ThinkPad Yoga, no doubt. It's a very good machine. It is Full HD yes, maybe worse than QHD, but honestly you will not notice the difference. It will still be as sharp and as clear as on the Yoga 2 Pro.And you never know when you will use a pen. Using a pen can make you work more accurately with the touchscreen in certain occasions.All I can say is get the ThinkPad Yoga, see for yourself if you use the digitizer pen. You will never know if you haven't tried it. But the ThinkPad Yoga is a machine worth buying.

9 more replies
Relevance 36.9%

Hi all,I've the Lenovo Thinkpad W701 with Windows 8.1. I installed the current driver (from 2010!!) for Windows 7 and everything works fine for some years. But now I bought a new Wacom Intuos Pro. After installation of this drivers, the driver of the internal W701-digitizer crashes. Another problem of the internal W701-Digitizer:The work with current Adobe Cloud-products makes lot of problems: Photoshop CC uses the pen only with special tricks and Illustrator CC always crashes if the internal Wacom-driver is installed. At office it's no problem - here I use the external newer Wacom Intuos.But when travelling, the internal digitizer was a very nice function, which now doesn't work at my W701 since I installed the Intuos-Driver (I had to uninstall it, because it crashes evry time and it wasn't possible to start Adobe Illustrator, which has a problem with this old driver). So I think, the driver from 2010 is too old and didn't really work under Windows 8.1, has conflicts with newer Wacom-tablets and didn't support current functionality like WIndows Ink (which is necessary for Photoshop and Illustrator). Therefore my question:Did anybody know, if there are actual drivers othe then the official offered Lenovo-Driver for the W701-digitizer? Has anybody other also problems, running the internal W701-digitizer from Wacom together with newer Wacom-Tablets? Thanks al lot,Klaus













... Read more

Answer:Wacom Digitizer on W701 and Win 8.1

Thanks to the very good service of Wacom, I've a very good solution:  You can download a current driver underhttp://www.wacom.eu/index4.asp?pid=9278&lang=deThis driver works with the Thinkpad W701 digitizer and supports also all current requirements used by adobe. Using this driver, you can additionally work with another Wacom-tablet (tested: The Intuos Pro) and Adobe Illustrator starts and all Adobe CC-products (Photoshop, Illustrator) are working very good with both digitizers: The Intuos AND the internal W701 Wacom digitizer. My question: Why doesn't Lenovo also support this good solution on it's driver-site?

1 more replies
Relevance 36.9%

Is there a digitizer pen that works with the ThinkPad T440s?

More replies
Relevance 36.9%

The digitizer glass panel on my HP 17g-g145ds laptop got cracked. Does anyone know where I can obtain a replacement? the display is a Samsung LTN173KT03. 

Answer:Replacement digitizer for laptop

On eBay: This one is a bit pricey but is the correct part: http://www.ebay.com/itm/HP-17T-G000-G100-17Z-G000-Touchscreen-Digitizer-LCD-/252626115517?hash=item3...

1 more replies
Relevance 36.9%

I bought a Yoga 520 and the touchscreen does not work. anyone knows what can i do?

More replies
Relevance 36.9%

I only noticed this problem recently. My Helix was updated to Windows 10 in January and there were no issues with the digitizer until recently. It isn't recognised at all on the screen but the touch feature still works. I don't recal the pen being damaged at all and worked perfectly in the past. Anyone have any advice on how to go about checking if the digitzer is unrecognised on my laptop or is genuinley broken?

Answer:Helix Digitizer Pen Not Working

I had the same pen ad t dint wwork too(((

1 more replies
Relevance 36.9%

My ThinkPad W700 has some proprietary Lenovo software called the "Digitizer Activity Monitor."  I'm trying to figure out what this program does and whether it is necessary or desireable to keep it.  I'd like to remove it if it's not somtething I need because it  hogs such a large percentage of CPU resources.  It always uses at least 25% of my total CPU capacity and sometimes much more. 













Solved!

Go to Solution.

Answer:Digitizer Activity Monitor-Is it necessary?

Do you have the palmrest digitizer? If not, uninstall it. If so, make sure it's the latest version. If you don't plan on using it, you might consider uninstalling it as well.
 
I don't think it using 25% CPU is proper in any case.

2 more replies