Computer Support Forum

Why do I keep getting error 0x80072EFD

Question: Why do I keep getting error 0x80072EFD

After Microsoft support from India fixed error 0xc1900107 Update, which took 5 hours they could not fix error 0x80072EFD. I cannot get anything from the store, apps or buy anything.

Relevance 100%
Preferred Solution: Why do I keep getting error 0x80072EFD

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Why do I keep getting error 0x80072EFD

PC 💻 or phone 📱?
Sent from mTalk

1 more replies
Relevance 63.96%

Try this link: http://support.microsoft.com/kb/836941
 

More replies
Relevance 61.09%

error code 0x80072efd will not let me download apps. Netflix was not working, saying that my connection was slow. I deleted it intending to re-install it. every time I click to install it says, "error code 0x80072efd. your connection is slow, try
another connection". I have tried three different working networks. I can do anything but install apps.

More replies
Relevance 61.09%

what should i do to resolve this error 0x80072EFD??????
the problem is that i can operate internet using any browser but i can not open the windows store....
solutions please
 

More replies
Relevance 61.09%

Hi. I have a windows 8 laptop and I am trying to upgrade to windows 10. Every time I try, it starts, but goes to the same error page, something about my network not working. My internet connection is fine, and I have tried the control panel settings for
my internet connection but all the <g class="gr_ gr_266 gr-alert gr_spell gr_run_anim ContextualSpelling ins-del" data-gr-id="266" id="266">trouble shooters</g> I have tried don't work. Any ideas? I only have
five days left so need help fast!
thank you in advance.

More replies
Relevance 60.27%

i have HP mini notebook with microsoft security essentials loaded in it. recently when i tried to update this message popped up" Security essentials could not check for virus and spy ware definition updates due to an internet or network connectivity issue" and the error code is 0x80072efd. please help

Answer:i m getting code error 0x80072efd plz help.windows 7

Causes:Applications that are open and may interfere with your Internet Communications.Internet Connection is damaged or corrupted.Problem with your PC settings and options.You have a high usage of your Internet.Database Errors.Your firewall is blocking your connection.To Fix This:Step 1. Make sure you are connected to the Internet.Click Start.Open your browser.Type speedtest.net on the URL box.Test your Internet speed.If the page will open then you are connected. Otherwise, contact your ISP.Step 2. Check your Firewall SettingsRight-click Firewall icon.Select Open. Browse the settings.Click Exceptions.Place the following websites on the exceptions list:http://windowsupdate.microsoft.comhttp://update.microsoft.comStep 3. Temporarily disable your anti virus software.Step 4.Can you try a manual reset of your router.

2 more replies
Relevance 59.45%

I am having this same issue. Did someone respond to Shahan? I am new to this forum.

Answer:Vista Windows Updates error 0x80072efd

Hi Grace. . .

Welcome to the Tech Support Forum - Vista Support.

I took the liberty of moving your post from the other similar thread so you can be sure that all replies herein pertain to your system and no one else's.

The Windows Updates error 0x80072efd means that your system is not properly connecting with the Microsoft Updates site or that it cannot complete downloads as it needs to.

One cause can be your Internet connection, but more than likely it is related to your anti-virus program and the existence of a 3rd party (non-Microsoft) Firewall. What a/v product(s) do you have installed and are you using the Windows Firewall &/or any other one?

Is your system updated with Vista SP1?

Regards. . .

jcgriff2

.

1 more replies
Relevance 59.45%

After last patching tuesday, my Livemail has not worked in Windows Live Mail. I get this error: 0x80072EFD

I have googled it, and it shows up with errortrapping on Windows update!! But Windows update is working just fine, only I can't use my Microsoft email account in Microsofts Windows Live Mail. My Gmail is working fine in Windows Live Mail, so why not my livemail account?
Anybody got a hint to a solution?

More replies
Relevance 59.45%

error code 0x80072efd will not let me download apps. Netflix was not working, saying that my connection was slow. I deleted it intending to re-install it. every time I click to install it says, "error code 0x80072efd. your connection is slow, try
another connection". I have tried three different working networks. I can do anything but install apps.

More replies
Relevance 59.04%

Whelp to start this off I've Upgraded to windows 10 from windows 7. I knew I was going to have issues with it considering it just came out but I think the issues I'm having are registry related errors due to Some issues i used to have with windows 7. So back about in I'd say March or April I'd had the Issue of malware getting into my registry and changing Chrome's, Firefox's and IE's Proxy setting to other values. Resulting in greyed out Boxes under internet settings and Under the connections tab Saying "Some settings are managed by your system adminsitrator" . I have gotten it resolved by deleting the values. But now its back again. Also you should know i did full scans with all of the following before posting here those include. Rougekiller, AdwCleaner, Hitman Pro, Avast, Emisoft Security Suite, and Malwarebytes. They Found the general PUP and Malware Which have been removed But there are Values that probably need deleted or changed and I need help finding them I've been browsing for an Answer on why the store was not working for a while until I realized what was going on. Note that Firefox works Fine but Internet explorer and anything Microsoft Related Cannot access the Internet that Includes the store windows update and logging into my Microsoft account.
Oh I've also Ran SFC /Scannow and CCleaner.

Any help would be appreciated

Answer:Error 0x80072EFD Whilst Trying to use windows update and store

Well I found a fix for me It seems the Local Adress I was using was already taken thus making me not able to connect All i did was change the DNS to google's public DNS then Change my local IP to 192.168.1.65 Hope this helps someone else

2 more replies
Relevance 59.04%

Whelp to start this off I've Upgraded to windows 10 from windows 7. I knew I was going to have issues with it considering it just came out but I think the issues I'm having are registry related errors due to Some issues i used to have with windows 7. So back about in I'd say March or April I'd had the Issue of malware getting into my registry and changing Chrome's, Firefox's and IE's Proxy setting to other values. Resulting in greyed out Boxes under internet settings and Under the connections tab Saying "Some settings are managed by your system adminsitrator" . I have gotten it resolved by deleting the values. But now its back again. Also you should know i did full scans with all of the following before posting here those include. Rougekiller, AdwCleaner, Hitman Pro, Avast, Emisoft Security Suite, and Malwarebytes. They Found the general PUP and Malware Which have been removed But there are Values that probably need deleted or changed and I need help finding them I've been browsing for an Answer on why the store was not working for a while until I realized what was going on. Note that Firefox works Fine but Internet explorer and anything Microsoft Related Cannot access the Internet that Includes the store windows update and logging into my Microsoft account.
Oh I've also Ran SFC /Scannow and CCleaner.

Any help would be appreciated

Answer:Error 0x80072EFD Whilst Trying to use windows update and store

Well I found a fix for me It seems the Local Adress I was using was already taken thus making me not able to connect All i did was change the DNS to google's public DNS then Change my local IP to 192.168.1.65 Hope this helps someone else

2 more replies
Relevance 58.22%

Windows Store does not/has never worked since upgrading to Windows 10. When opened it says "The server stumbled. We all have bad days. Refresh the page." Error code 0x80072efd at bottom of page. Refreshing page merely repeats the same message.

Scoured the web for fixes, can't find anything other than to purge Store cache (wsreset.exe), which does nothing for this problem.

IN addition, Microsoft Edge also does not work. Do not know if that is a related issue or separate.

Any help anyone could provide would be appreciated.

More replies
Relevance 58.22%

Store Quality team of Microsoft has posted a workaround for the “Server Stumbled” issue with the error code 0x80072EFD.
There were many reports of Windows 10 users facing this issue of “Server Stumbled” with error code 0x80072EFD . This error manifests in Network connectivity issues from the Client to the Store Services. A workaround is made available as listed below to tackle this:
Using an administrator account on the affected machine, open the registry editor and navigate to the following key
“HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\C urrentVersion\NetworkList\Profiles”
After navigating to the said key, do this: Right click on Profiles key and go to Permissions Click Advanced Check the ‘Replace all child object permission entries with inheritable permission entries from this object’ ApplyRestart the machineTry connecting the Store again and you will not see the Error 0x80072EFD (Source:Answers, meraTechPort)

Answer:Workaround for “Server Stumbled” issue with the error code 0x80072EFD

More troubleshooting options covered at The Server stumbled, We all have bad days.

1 more replies
Relevance 56.99%

Also says to check connection but everything else is working fine including internet; any suggestions as to fix?

More replies
Relevance 52.89%

Never had this problem before, my Notebook is on the latest TP build. First time trying to open it today. I already restarted the computer, and troubleshooter found nothing.

More replies
Relevance 48.79%

Tried the following:
1. Update works if I bypass the router, ie. connect the PC directly to modem.
2. It also works from different ISP, through router (at work).
3. Format disk & Reinstall windows 7

From windowsupdate.log:
2011-12-01 00:03:54:771
968 99c
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://download.windowsupdate.com/v9/windowsupdate/redir/muv4wuredir.cab>. error 0x80072efd
2011-12-01 00:03:54:771
968 99c
Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072efd
2011-12-01 00:03:54:771
968 99c
Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072efd
2011-12-01 00:03:54:771
968 99c
Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072efd
2011-12-01 00:03:54:771
968 99c
Misc WARNING: DownloadFileInternal failed for http://download.windowsupdate.com/v9/windowsupdate/redir/muv4wuredir.cab: error 0x80072efd
2011-12-01 00:03:54:771
968 99c
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
2011-12-01 00:03:54:771
968 99c
Misc Microsoft signed: Yes
2011-12-01 00:03:55:863
968 99c
Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <127.0.0.1:80> Bypass List used : <(null)> Auth Schemes used : <>
2011-12-01 00:03:55:863
968 99c
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://download.microsoft.com/v9/windowsupda... Read more

Answer:Can't update Windows 7 - Windows Update Client failed to detect with error 0x80072efd

Hi,
 
Try to remove the proxy server entry from the WinHTTP proxy configuration for Windows 7:
 
1.   
Click Start, and then type cmd in the Start programs and files box.
2.   
Right-click cmd.exe in the Programs list, and then click Run as administrator.
Note If you are prompted for an administrator password or confirmation, type the password or click Continue.
3.   
Type the following command and then press Enter:
netsh winhttp show proxy
Note The proxy setting is listed next to Proxy Server. If there is no proxy server, Direct Access <no proxy server> is shown in the Command Prompt window.
4.   
To remove the listed proxy setting, type the following command and then press Enter:

netsh winhttp reset proxy
5.   
Click Start, click All Programs, click Windows Update, and then try to download and install updates again.Alex Zhaozx
TechNet Community Support

2 more replies
Relevance 47.56%

I am getting a "something happened" box with 0x80072efd - 0x20000 when trying to run the media creation tool from Win 7 sp1. How do I resolve this issue?

Answer:How can I fix 0x80072efd - 0x20000?

i made that post, it should say while trying to upgrade to windows 10

5 more replies
Relevance 47.15%

Just upgraded my dad's PC and get this error

Windows update works fine, we've applied all the upgrades, which is what all the search results trace the problem to

Everything else seems to work - I've put the mail.btinternet.com address in the mail server settings, it's remembered his username from before the upgrade

Running AVast and Windows Firewall is on

Any ideas?

More replies
Relevance 47.15%

Just upgraded my dad's PC and get this error

Windows update works fine, we've applied all the upgrades, which is what all the search results trace the problem to

Everything else seems to work - I've put the mail.btinternet.com address in the mail server settings, it's remembered his username from before the upgrade

Running AVast and Windows Firewall is on

Any ideas?

More replies
Relevance 46.33%

After Installing 4-5 Updates , I am Stuck On Build 9926 . Whenever I try to Update The Windows through windows update it gives the error 0x80072efd. I have tried the windows update troubleshoot , it detects a registry problem sometimes and repairs it but i still cant update my windows . Please Help Me

Answer:Windows Update Fail 0x80072efd

I Just Ran A Registry Check And This Is What i Got With Troubleshooter, but the windows update still doesnt works
Service Registration Corrupt OR Missing - Action Done Reset Service Registration
Problem with BITS service : The requested service has already been started. More help is available by typing NET HELPMSG 2182.
Computer Name:
WIN-GOVQAF4ES3G

Windows Version:
10.0

Architecture:
x64

Time:
Monday, May 25, 2015 12:18:31 PM


+

I Can Browse The Windows Store Without Any Problem But When I Try To download something it shows the same error code

4 more replies
Relevance 45.51%

I cant crack this, my Windows 10 mail (outlook) worked fine yesterday, but today its not sending and reciving my mail.
I tried to check my mail account (Hotmail and Gmail) in my browser and its working as it should there.

After a while i had this error popup, (see screenshot below) and i tried to google some solutions, but none worked. I also ran sfc /scannow but it found nothing and it did not help.

Does anyone know a solution to this?

Thanks in advance

Jim

More replies
Relevance 45.51%

I cant crack this, my Windows 10 mail (outlook) worked fine yesterday, but today its not sending and reciving my mail.
I tried to check my mail account (Hotmail and Gmail) in my browser and its working as it should there.

After a while i had this error popup, (see screenshot below) and i tried to google some solutions, but none worked. I also ran sfc /scannow but it found nothing and it did not help.

Does anyone know a solution to this?

Thanks in advance

Jim

Answer:Outlook (Win 10 build in) stopped sending and reciving - 0x80072efd

Today it gives me a new error (0x80070003) I suspect that they are related.

3 more replies
Relevance 39.77%

I am getting a "something happened" box with 0x80072efd - 0x20000 when trying to run the media creation tool from Win 7 sp1. How do I resolve this issue?

More replies
Relevance 24.19%

I'm running Windows 7 Pro on my Dell laptop. This laptop has been in storage and hasn't been turned on in a year. Originally, all I wanted to do was use iTunes. The problem:
 
It made me update it in order to use it, but I got an error.
 
I un-installed it and tried downloading a fresh copy and I get the following error:
After some Googling, I read that not having the latest Windows .NET framework might be the problem. Sounded reasonable so I fired up Windows Update but that gave me an error and wouldn't start checking for updates.
 
I managed to get it to check for updates, but now when it starts the process, I get the following:
I Googled the error code "8007007E" and tried a few things to try and fix it.
 
I downloaded the windowsupdatediagnostic.diagcab, found on Microsoft's site, here:http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
I tried resetting the Windows Update reset tool, using "MicrosoftFixit50202", found here:http://go.microsoft.com/?linkid=9665683
I download the system readiness tool, found here:https://www.microsoft.com/en-us/download/details.aspx?id=3132
I tried a clean boot.
 
I tried renaming the Windows Update Softwaredistribution folder.
 
None of this worked.
 
I ran the System File Checker tool (SFC.exe) and the results said I had bad files, but I don't know how to fix them. It generated a CBS log, which is too large for me to post (10MB) , so I've uploaded to dropbox,... Read more

Answer:Windows update error.. System File Checker integrity error..iTunes install error

Open the Command Prompt, copy and paste the commands below one at a time followed by pressing Enter after each command.
 
net stop wuauserv
 
rmdir /s %windir%\softwaredistribution\wuredir
 
net start wuauserv

9 more replies
Relevance 24.19%

Symptom:
The URL of a shared folder on the LAN,  copied into Windows Explorer address bar produces the Network Error in the above title.
Network Error: WIndows cannot access
\\server.LAN.com\MySharedFolder   Error Code: 0x8004005 - Unspecified error.
But from a Dos terminal, Windows Explorer can open the same location just fine.  From DOS terminal:
start

More replies
Relevance 24.19%

I had a very bizarre problem today. I downloaded about 50 .mpg files and put them into a folder on my desktop. I opened one of them, and it worked fine, but after that every time I even opened the folder that the files were in, only half of the thumbnails would appear and then it would tell me that I had a Visual C++ Runtime Error, from explorer.exe aborting. At the same time as this, windows would pop up a little message saying that my virtual memory was low. Later, it popped up a message saying that my Media Player needed to be reinstalled and that my Norton Antivirus needed to be reinstalled. Then it disabled my Norton Firewall and my Norton Antivirus. Lastly, I started getting error messages telling me that my soundcard needed to be configured to handle voice files, by enabling hardware acceleration. The only problem with that was that Windows would not let me access the advanced sound settings!

I am running Windows XP (all patches up to date), 256 MB Ram, 75 Gig HD - so I figured the "low" virtual memory had to be an error. I tried tripling the virual memory to 1GB and also tried letting Windows automatically set the virtual memory size, but neither of these fixed the problem. My immediate thought was that it was a virus or trojan, but Norton VirusScan, Swat-It Trojan Scanner, and System Suite VirusScan all failed to detect anything, and all of them have their definitions up to date.

I ran a Google search to see what other things I should try and none of the... Read more

More replies
Relevance 24.19%

i have not been able to solve this one for a particular user.

skydrive pro stopped syncing. it produces the error in the title. i did some googling and followed a few fixes with no luck. due to some other office issues, i wiped his machine and reinstalled windows. with a fresh install of windows and office 365 he is still getting the error when syncing skydrive.

does anyone have any idea how to fix this?
 

Answer:Error code=0x80004005; Error source=Groove __ Microsoft SkyDrive Pro Error

1. Clear all browsing history on IE
2. Stop syncing all Skydrive Pro folders (have the remaining folders moved away from the original location to avoid duplicate renamed folders)
3. Run IE as administrator and resync the libraries normally

Those are the only instructions I found that made sense.
 

3 more replies
Relevance 23.78%

The error onpage of Dell Start Page Trying to edit weather and the error message shows up. the error message is as follow: Line 2 Chasr 316 Error "HTML" is null osr not an object Code O URL HTTP:www google.com/IG/dell?HL=en&client=Del Would you send me an e-mail with the answer, please.

More replies
Relevance 23.78%

I am getting a blue screen after I attempt to login to a pc.

Verification error in wmiacpi.sys (WMD driver error) 20e

wmiacpsi.sys = 152f at B9BAB852F

I have run the Dell diagnostic and everything passed.
This is a Dell laptop latitude D531. Dell just replaced the hard drive about 10 days ago. It worked fine until Monday.

Any any what this may be?

Answer:Blue Screen Io Error. Verification Error In Wmiacpi.sys (wmd Driver Error) 20e

Are you sure of the spelling of the 2nd file name? If so, Google doesn't give any results for it - which is suspicious.The first file name ( wmiacpi.sys ) is a Windows file that's used to help manage the ACPI settings in your system. http://www.bleepingcomputer.com/filedb/wmiacpi.sys-7763.htmlA BSOD error will usually point to the file that the error occured in, but this may not be the source of the error. Here's a link on how to find more info about the BSOD message: http://www.bleepingcomputer.com/forums/top...tml#entry409491Once you locate the .dmp files for the event, you can use this link to generate an analysis of the dump for us to have a look at ( http://forums.majorgeeks.com/showthread.php?t=35246 )

6 more replies
Relevance 23.78%

Hi Everyone:
Can you help me with this issue please?
I am building a database in Access 2007, windows7, it works perfectly well on my computer where i am building it; but one feature doesn't work on another computer that also has the OP system and Access version.
when you're working in one form with one record, you click on a button that will open another form and filter the records to show only the profile of the same person. the error message it gives is: Run-time error '3000 ': Reserved Error (-3201); there is no message for this error.
i will show below the code where it debugs. I'd appreciate any help with that.
(Again: it works well on my computer, but gives that message on another computer)

Private Sub Find_in_Bio_Click()
Application.DoCmd.OpenForm "Staff_BioEntry", , , "((([Staff_BioEntry].[Full Name]=""" & [Form_Staff_Activities].[Full Name] & """) AND ([Staff_BioEntry].[DOB]= #" & [Form_Staff_Activities].[DOB] & "#))) AND ([Staff_BioEntry].[Registrant_Type] =""" & [Form_Staff_Activities].[Registrant_Type] & """)"
End Sub
 

More replies
Relevance 23.78%

Ive just bought some new memory (TWIN2X4096-8500C5C G), the new memory doesnt seem to work unless I only add one stick, and even with that I get blue screen errors.

So from reading a few pages on teh internet I put my old memory back in, and ran windows driver verifier. Upon restarting I got and keep getting teh following BSOD.

IO SYSTEM VERIFICATION ERROR in wmiacpi.sys (WDM driver error 20e)

[wmiacpi.sys+152f at B7C5C52F]

Answer:Blue Screen IO Error. Verification Error In Wmiacpi.sys (WMD Driver Error 20e)

If the system ran fine...before you added RAM...then you need to see if the new RAM (by itself)...works.The new RAM may not be compatible with your old RAM, in which case the system will run fine with one or the other...but not both.The Driver Verifier tool is tricky to use, I would disregard that effort...for the moment.Remove your old RAM...put the new RAM in...see if the system works properly.FWIW: http://www.bleepingcomputer.com/forums/t/153175/blue-screen-io-error-verification-error-in-wmiacpisys-wmd-driver-error-20e/Louis

14 more replies
Relevance 23.37%

Hello there. I have been redirected here by jamanji, whom has been most helpful by the way.
My PC crashed a little over a week ago.
Rather than retype everything, I would like to give you the link to my post.
I am not 'Tech' per se, but I would like to try and resolve my problem myself,
To make a long story short... I had error 0xc000000f. I have 2 threads on the subject, but the first thread was useless.( I think)
I read gregrocker's tutorial.
I made a Kaspersky Disc. I have a Pop Up from Kaspersky.
saying if I continue...........

Here are the links.

confused by what type of disc to use

Error 0xc000000f

If you read this...Thank you for your time.

Answer:Burnt out from error error error! Time to go back to Paper.

Ok mate one thing straight up the Kaspersky only requires a CD you can use a DVD but seriously a waste of useable space. Have been using Kaspersky security and tis rescue disk for years now so just the CD mate.

Just follow the prompts when you run the disk. It will boot (of course) but will not need Windows to do anything.

There are other options -

Bootable AntiVirus Rescue CD for Windows: Free Download any are good and again do not require Wndows to run.

If you can get it going then I would try this
http://support.kaspersky.com/viruses/utility < the top scanner TDSS Killer

9 more replies
Relevance 23.37%

I have got error 0x8007371 when I tried to install .netframework 3.5 which was required to install windows essentials.
I ran DISM command to fix 0x80073712 error, and received another error message in the command prompt: Error 14098 Component store has been corrupted.
THen I ran sfc/scannow which gave another error "An error occured during installation of assembly component".
This is such a bul grab, can someone help
Thankz

More replies
Relevance 23.37%

Hey guys, having trouble getting XP to Update, well it did Update MSRT and failed on Flash as usual because I removed Flash.  The only thing I can think of that I changed was my Router settings to more aggressive, but it has not affected Windows 7?
 
This is the ms document on it: https://support.microsoft.com/en-us/kb/883820
 
I tried all the stuff they say there but none works.  I have SP3.
 
I am also being sent to this site, which don't look like it should.
http://windowsupdate.microsoft.com/
 
Thanks pcpunk

Answer:HTTP Error 500 - Internal Server Error, Error 0x8ddd0010

All good now!

1 more replies
Relevance 22.55%

My pc reboots for no reason when I try and access my network folders. I get the following errors in Event Viewer.


************************************************** ******

Event Type: Error
Event Source: ipnathlp
Event Category: None
Event ID: 31008
Date: 2004/11/10
Time: 07:33:55 PM
User: N/A
Computer: GIGS
Description:
The DNS proxy agent was unable to read the local list of name-resolution servers from the registry. The data is the error code.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 6f 00 00 00 o...

************************************************** *******

Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 2004/11/10
Time: 02:40:01 PM
User: N/A
Computer: GIGS
Description:
Error code 00000051, parameter1 00000004, parameter2 00000001, parameter3 e12cfe18, parameter4 00008080.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 30 30 30 30 30 30 35 0000005
0020: 31 20 20 50 61 72 61 6d 1 Param
0028: 65 74 65 72 73 20 30 30 eters 00
0030: 30 30 30 30 30 34 2c 20 000004,
0038: 30 30 30 30 30 30 30 31 00000001
0040: 2c 20 65 31 32 63 66 65 , e12cfe
0048: 31 38 2c 20 30 30 30 30 18, 0000
0050: 38 30 38 30 8080


**********************************... Read more

More replies
Relevance 22.55%

so i recently had this virus and someone on these boards helped me remove it. ty for that! but after 2 reboots it has come back..and with more errors this time like the explorer and drwatson. and also can you tell me why i have to do "open as" instead of just clicking on text documents? it says access is denied. i didnt do anything to get it again nor did i dl anything. anyway here are my logs any help is appreciated.
Gmer.txt
Hijackthis.txt
DDS.txt

Answer:Csrsc.exe error, Drwtsn32.exe error, explorer error

I have reasons to believe that you have a file infector onboard.
Please visit this website - http://virusscan.jotti.org
Submit the file for a comprehensive scan & then post the results back here.

C:\Windows\system32\cmd.exe

If it's virut, you need to wipe the machine immediately. Do not connect this machine to another one for you will infect that one too

7 more replies
Relevance 22.55%

hii have a t61 and i am experiencing problems with the internal fingerprint reader, when i open the fingerprint software an try to enroll my finger it gives the following error: An Internal error occured (object:clsid-not-found(CID_Bio:iviceCache_Creator))and when i press on details button :error code E7210001 cannot enroll user can any one help me with this i am using windows vista Business SP2 with 2G of ram Cpu 2.0 Core2Duo Thanks

More replies
Relevance 22.55%

Ok so my first problem was what I thought the sasser worm. I researched it online and I can't find any traces of it anywhere now. I ran a few spyware checkers and stuff and I think I may have messed with some registries.

Now I cannot access the internet and heaps of things are stuffing up. I disconnected my internet and upon startup get this.

A "Data Execution Prevention" window that closes "Generic Host Process for Win32 Services".

I press OK and that goes away. I found some suggestions online but none of them seem to work. That's my first problem.

My computer runs fine until I connect my internet. It runs alright for a minute or two before I get this error.

The instruction at "0x00401000" referenced memory at "0x00401000". The memory could not be "written". Which has recently been appearing at the same time as AVG saying a threat has been detected at "C:\WINDOWS\drivers\atimixx8.sys"

After this has come up I can press OK to terminate the stop error, or cancel to debug. Either one does nothing but stops my internet from working, and the internet on other computers in my house (we are all on a network). When I try to heal/move to vault/delete the AVG threat, it says I don't have permission.

I've thought about just formatting, but I have seen people who say that even with a format, the problem still persists.

Please help!
 

More replies
Relevance 22.55%

Greetings!

I am having a problem with the above error message (error:syntax.error) when I'm running Firefox.

I have uninstalled Java and reinstalled it, but still the same problem.

OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 8
RAM: 8099 Mb
Graphics Card: Intel(R) HD Graphics Family, -238 Mb
Hard Drives: C: Total - 698475 MB, Free - 580394 MB;
Motherboard: TOSHIBA, PEQAA
Antivirus: avast! Antivirus, Updated and Enabled

Thanks,
Barbara
 

Answer:Error Message error:sytax.error - Firefox

See if you can find help here.

http://www.java.com/en/
 

1 more replies
Relevance 22.55%

Just got a new computer and am trying to install my Philips Mini HiFi sytem. Contacted their support centre and they don't know what to do! The stereo system simply plugs into a usb port and plays your audio through their system. The only difference between the system it worked on a few days ago and now is that I am running Windows Professional x64.

The problem:

three things to install:

1. the Philips drivers. Philips support got me to download their drivers for Win XP.

When I install this the error rec'd is: "Install 2.15 setup. While installing drivers Plug and Play error detected. Please reboot and try again". I reboot and try again, same thing.

2. The program "Sound Agent" to run the show. When I install the Sound Agent program, the error rec'd is: "VDI32.exe has encountered a problem and needs to close".

3. MusicMatch to channel the audio through to it. (Seems ok but tells me it's out of date - no biggie I can deal with that).

In Device Manager there is "Unknown Device" listed under System Devices shown to be not installed (the yellow exlamation mark through it). When I try to Update Driver it says, "Cannot Install this hardware. The hardware was not installed because the Wizard cannot find the necessary software".

Finally, whenever I reboot I get the error message: "The QVE bus driver is not detected. Reinstall the Qsound Virtual Audio Devices Bus Enumerator driver".

I have reform... Read more

Answer:A Real Tough One. PnP error, VDI32.exe error and a QVE error. Help Please

Your link is not working, but many things don't have 64 bit drivers. Did the drivers say for XP or specifically for 64 bit?
 

2 more replies
Relevance 22.55%

I am using a WD Proxkey DSC and while signing I am getting the following error"
"The Windows Cryptographic Service provider reported an error: The parameter is incorrect. Error Code: 2148073511"

More replies
Relevance 21.73%

Hello all,

I have a problem with Windows Update agent on Windows 7 SP1 enterprise.
We are using Configuration Manager 1606 and Windows 7 SP1 and about 140 computers works without any problem.
On the other 10 computers I got the following error message in the windowsupdate.log:
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING:     faultstring:Fault occurred
WARNING:     ErrorCode:InvalidParameters(7)

I've tried several actions although none does any help. Here is the list of actions:
- upgrade windows update agent to the latest version
- windows update agent reset by this instructions https://support.microsoft.com/en-us/help/971058/how-do-i-reset-windows-update-components
- empty Temporary Internet files
- check the rules and blocked traffic on windows firewall and physical firewall between server and workstation vlan
- sfc /scannow

It looks like significant Windows 7 error, although reinstalling is not my option.

Thanks for any help!
GregaR

More replies
Relevance 21.73%

hi....
i have promblme , i do not know how to fix it..
i have kodak scnners i1220 plus
i have RD Web Access
the promblme is..
I have a system based on Oracle has been connted with one scanners( i connected with scanners) When i do a scan shows me this a message
(Scan Error Error while Scan::0::LEAD Error: Twain source manager no)
and
(Scan Error
Error while Scan::0::LEAD Error: Twain DS is connected to max possible apps)

Knowing that the scanner system has worked to windows xp but when we tray on Windows 7 does not work
why..............
i have pormission administrator and i setup the scnners drivers agine still same problme..
.......
i have windows 7 professional
service pack1
hp compaq 6200 pro MT PC
intel(R) core(TM)i5-2500 CPU @ 3.30GHz 3.29 GHz
4.00 GB
32-bit operating systme

Answer:Scan Error Error while Scan::0::LEAD Error: Twain source manager no

It's possible that TWAIN DSM is missing on your Win 7 machine. You can get it here and try again.

Catherine Sea
Dynamsoft: Provider of version control solutions & TWAIN SDKs

1 more replies
Relevance 21.32%

Hey to all.
I am new to this forum and I want an answer with an ERROR.
My ERROR is "Fatal Error,NET_SendPacket ERROR : NO ERROR"(the same as title of the thread)
it occurs whenever i try to play counterstrike 1.6,counterstrike condition zero or half life 1 over LAN with another computer on the same network.But as soon as i start the game in this computer OR try to find any LAN server the Other PC which is the LAN server has this error and it exits the game on that computer only and as a result I get no LAN server.
I first thought of googling this error out but nothing worked out like the QoS uninstallation and tweeking the administrative tools>Local Security Policy.(honestly i just tried these two because i cold not understand or read any further)
Ohh and I have just re-installed the windows xp sp2 on this system.
If Any Additional Information is required please let me know.
So can anybody help me?
and please be simple i am not a geek or nerd ya know,so HOW?
 

More replies
Relevance 21.32%

Hello,Ok so I have many issues with my laptop.First of all one day it failed and it was giving me the Hard drive not found (3F0) error.I decided to buy a new hard drive and still the same.Then I inserted a bootable usb (windows 7 pro 64bit) and tried to install windows.Then on the screen that I had to select the drive, the hard drive was shown.When I pressed to install windows a new error appeared. (ERROR CODE 0X8007045D).I devided to start over. Then again a new error appeared (Error 0x8004240f)I am really frustrated.What's wrong?Any advice?Thank you

Answer:3F0 Error, Error 0X8007045D , Error 0x8004240f

@ptheodoulou4abc? You need to partition the drive into one whole drive. You can use any free partition tool on-line. http://download.cnet.com/MiniTool-Partition-Wizard-Free-Edition/3000-2094_4-10962200.html REO  

9 more replies
Relevance 21.32%

Hello there. Recently my computer have just randomly shutdown meanwhile i'm playing games like CS;GO, League of Legends. The screen will just turn black and it will start to make one hell of annoying noise untill it reboots.

I've updated all my drivers. Tested my memory. Tested my RAM. Run a virus scan. Checked the heat on my Graphic card and CPU. and all seems to work just fine.
This is the errors i get:


Code:
Log Name: System
Source: EventLog
Date: 25-12-2013 19:10:41
Event ID: 6008
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Snaski-PC
Description:
The previous system shutdown at 19:08:21 on ‎25/‎12/‎2013 was unexpected.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="EventLog" />
<EventID Qualifiers="32768">6008</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-25T18:10:41.000000000Z" />
<EventRecordID>2045</EventRecordID>
<Channel>System</Channel>
<Computer>Snaski-PC</Computer>
<Security />
</System>
<EventData>
<Data>19:08:21</Data>
<Data>‎25/‎12/‎2013</Data>
<Data>
</Data&... Read more

Answer:Error 41, Error 1001 and error 6008.

Hi Snaski.

It is some display/graphics related issue.

Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of the PSU.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark
Let us see a screenshot of the furmark window, just before you close it.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Install the NVIDIA DRIVERS 314.22WHQL only.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Let us know the results.
_____________________________________________________________________________________

Code:
*******************************************************************************
* ... Read more

7 more replies
Relevance 21.32%

I've just install windows 7 home premium 64bit and got 4 times of BSOD.

for the first time error code is 0x0000001a
for the 2nd time error code is 0x0000003b
for the 3rd time error code is 0x0000003b
for the 4th time error code is 0x000000d1

I also attach minidump files and text files that I got from sf dianostic tool.



And another problem is I try to follow the instruction in this thread
How to fix BSOD caused by ntoskrnl.exe and ntkrnlmp.exe
and now I cannot start the normal window, I have to run in safe mode with network.



in the reply #4 that zigzag3413 post

Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here... Read more

Answer:BSOD by ntoskrnl.exe, error d1, error 3b, error 1a

For now, I do a restore point and be able to run the normal window7.

1 more replies
Relevance 20.5%

Hey guys, i want to thank you ahead of time for helping me.

This BSOD is a pain in the butt.

Intel Pentium 2.8GHZ
RAM 3.5
32 bit OS
Intel GG965 Express Chipset Family

I have already reinstalled the operating system multiple times, i think its a faulty graphics card, but i want to be 100% sure before i go and shell out the $$ for a new one

Please help The blue screen error points to igdkmd32.sys & it also says GRAPHICS_DRIVER_TDR_FAULT

Answer:BSOD error.. Restarts, but power button stays on, graphics card error?

STOP 0x00000116: VIDEO_TDR_ERROR (go to top of page)

Usual causes: Video driver, overheating, bad video card, ?BIOS, ?Power to card (see Significant Posts section below)

http://www.carrona.org/bsodindx.html#0x00000116

Incase you have overclocked your GPU reset it to the default.
Update your graphics driver to the latest stable version

1 more replies
Relevance 20.5%

Agent.exe - Entry Point Not FoundThe Procedure entry point qsovt could not be located in the dynamic link library C:\Windows\SYSTEM32\apphelp.dll.I get this error whenever i try installing something new. I have a 128GB SSD that has my operating system, and a 3TB HDD that i use to store everything else in like movies, games, programs, etc.Whenever i try installing something, this error pops up multiple times, when i press "OK" it disappears and pops up again. It doesn't stop the program from successfully installing, but it's annoying. How do i fix this?

Answer:Agent.exe - Entry Point Not Found Error / Dynamic Link Library Error

It's for Forte's email client...and InstallSheild in some cases...

3 more replies
Relevance 20.5%

This morning I installed new Hard Disk (WD Black2 Dual Drive) on my notebook Lenovo T410, then installed Win 8.1 on it too, It worked  for about 4 hours and my notebook stopped working. I tried to restart the system, but appeared the error: "ERROR 2100: HDD0 (HARD DISK DRIVE) INITIALIZATION ERROR (1). How can I fix it?

Answer:T410 - ERROR 2100: HDD0 (HARD DISK DRIVE) INITIALIZATION ERROR (1)

Hi Wjroque,
 
Welcome to Lenovo Community!
 
As per the query we understood that you are facing issues after up-grading the WD Black2 Dual Drive on your ThinkPad T410.
 

Have you checked with updating the WD Black2 Dual Drive firmware for your system?
Please click here to visit the link to download the firmware for that and follow the WD Black2 Firmware Update Instructions.pdf located in the downloaded zip file.

Hope this helps.
 
Best regards,
Hemanth Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

4 more replies
Relevance 20.5%

Hello.
I wonder if you can help me.
I keep getting error 0x800f0906 when running DISM /Online /Cleanup-Image /RestoreHealth.


DISM /Online /Cleanup-Image /RestoreHealth
Deployment Image Servicing and Management tool
Version: 6.2.9200.16384
Image Version: 6.2.9200.16384
[==========================100.0%==========================]
Error: 0x800f0906
The source files could not be downloaded.
Use the "source" option to specify the location of the files that are required to restore the feature.
For more information, review the log file.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
*********************
relevant bits from it seem to be:
Checking System Update Readiness.

(p)    CSI Payload Corrupt            amd64_microsoft-windows-windowsupdateclient-ui_31bf3856ad364e35_7.8.9200.16927_none_28265fa316d944b7\wuaext.dll
Repair failed: Missing replacement payload.
(p)    CSI Payload Corrupt            amd64_microsoft-windows-windowsupdateclient-ui_31bf3856ad364e35_7.8.9200.16927_none_28265fa316d944b7\wushareduxresources.dll
Repair failed: Missing replacement payload.

Summary:
Operation: Detect and Repair
Operation result: 0x800f0906
Last Successful Step: Entire operation completes.
Total Detected Corruption:    2
    CBS Manifest Corruption:    0
   &nb... Read more

Answer:Error when running DISM /Online /Cleanup-Image /RestoreHealth - error 0x800f0906

Hi,
Please upload the DISM.log files into OneDrive and post us the link here. The DISM log file can be found at
C:\Windows\Logs\DISM\dism.log.
Besides, for the CSI payload corrupt issue, please take a try to reset the Windows update components. Then try to run the command and check the results:
Follow this guide: How do I reset Windows Update components?
In addition, update the system to Windows 8.1 will make a better usage of the features and functions offered.
Windows 8.1 and Windows RT 8.1 build on
Windows 8 and Windows RT, to bring you enhancements in personalization, search, apps, the Windows Store, and cloud connectivity, and has the security and reliability features you expect from Windows. It's fast and made to work
on a variety of devices?especially on the new generation of touch devices.
For more information regarding update to Windows 8.1 from Windows 8. please see:
Update to Windows 8.1 from WIndows 8
Best regardsMichael Shao
TechNet Community Support

5 more replies
Relevance 20.5%

This message now appears on an otherwise excellent computer.

Cannot connect to wireless broadband (I'm doing this on my Equium P200D)

Any ideas. I've tried the Toshiba help to no avail.

Answer:Qosmio E10 CFSServ Listen Error & Recv InitConnect Error appears on startup

Hi

Someone wrote in this forum that the CFSServ is part of ConfigFree utility.
Remove ConfigFree application from the system and try to use and configure your WLan again or try to use the LAN connectivity!

Check it out

1 more replies
Relevance 20.5%

My friend has a Toshiba Satellite P75-A7200 and when he tries to boot up his computer he get a "Checking for media error" then "no bootable device found error". Multiple reboots same thing. His antivirus expired and he thinks he got a virus. Is there any way to flash a clean bios to his computer? He has Windows 8.1 and cannot get it into troubleshooting mode. Any suggestions? I'm old school and am used to boot disks.

Answer:Satellite P75-A7200 Checking Media error then No Bootable Device found error.

In order to boot from external device (like CD/DVD drive, USB flash memory stick, etc…) you have to disable the secure boot option within the BIOS settings.

If you want to boot from the internal HDD and the error still appears, then HDD could malfunctions…
In such case you should check whether the HDD is listed in the BIOS.
If not, you should replace it.

1 more replies
Relevance 20.5%

Hello,
 
Every time the computer reboots the message "GetEseDbInfo.exe has stopped working" appears. Checking for solutions yields no results.
 
Since this message has started:
 
- Windows search has quit working and states that "windows cannot access the specified device, path, or file. You may not have appropriate permissions to access them." 
 
- IE will only show a white screen and will not allow the tools option to be accessed. It keeps trying to recover and  cannot find any solution. Attempted downgrade to IE 9, re-install of IE10, use windows fix, and microsoft safety scanner.
 
-  Sticky Notes is unable to launch as it cannot access the file. 
 
I have run AVG, Advanced SystemCare, and Malware Anti-Malware but they all show up with nothing found. I don't know if these are all tied into together or are separate issues. 
 
The computer is a Windows 7 64bit operating system. 
 
Any help would be wonderful. Thank you!

Answer:GetEseDbInfo.exe error, IE White Screen, Search Access, & Sticky Notes Error

Open Task ManagerProcess (tab)Find GetEseDbInfo.exe, right-click and select "Disable"Reboot into Safe Mode with Networking. ADW CleanerPlease download AdwCleaner by Xplode onto your desktop.Close all open programs and internet browsers.Double click on adwcleaner.exe to run the tool.Click on Delete.Confirm each time with Ok.You will be prompted to restart your computer. A text file will open after the restart.Please post the contents of that logfile with your next reply.You can find the logfile at C:\AdwCleaner[S1].txt as well.   Last run ESET.Hold down Control and click on this link to open ESET OnlineScan in a new window.Click the button.For alternate browsers only: (Microsoft Internet Explorer users can skip these steps)Click on esetsmartinstaller_enu.exe to download the ESET Smart Installer. Save it to your desktop.Double click on the icon on your desktop.Check "YES, I accept the Terms of Use."Click the Start button.Accept any security warnings from your browser.Under scan settings, check "Scan Archives" and "Remove found threats" Click Advanced settings and select the following:Scan potentially unwanted applicationsScan for potentially unsafe applicationsEnable Anti-Stealth technologyESET will then download updates for itself, install itself, and begin scanning your computer. Please be patient as this can take some time.When the scan completes, click List ThreatsClick Export, and save the file to your desktop using a unique name, such as ESETScan. In... Read more

6 more replies
Relevance 20.5%

Agent.exe - Entry Point Not FoundThe Procedure entry point qsovt could not be located in the dynamic link library C:\Windows\SYSTEM32\apphelp.dll.I get this error whenever i try installing something new. I have a 128GB SSD that has my operating system, and a 3TB HDD that i use to store everything else in like movies, games, programs, etc.Whenever i try installing something, this error pops up multiple times, when i press "OK" it disappears and pops up again. It doesn't stop the program from successfully installing, but it's annoying. How do i fix this?

Answer:Agent.exe - Entry Point Not Found Error / Dynamic Link Library Error

It's for Forte's email client...and InstallSheild in some cases...

3 more replies
Relevance 20.5%

When I try to boot my W520, I get a BIOS boot up error : "2100: Detection Error on HDD0 (Main HDD)". I am using PNY XLR8 240GB SSD. It worked fine for a month. I also have PGP installed and whole disc encrypted. I installed an update of Intel Management Engine Firmware and Intel Chipset, both are the latest from lenovo site because I was experiencing expreme slowness from my harddrive. Programs would freeze. Webpages would take forever to load..The next time I rebooted, I got the error. If I leave the SSD out for a bit, and put the SSD back in, the disk will work for some time... but on next reboot, it is again detection error.. TRIM is enabled on my system. I am not sure how the SSD died so quickly. I am back to using my HDD but I am not happy. I want a solution... is this a intel chipset issue? Intel IMEI issue? Is  the PNY SSD just a bad model? I've googled plenty and dont really see a solution. Sometimes there is a firmware update.. PNY has no firmware updates for my drive.. I don't see anybody else using PNY on their W520, but plenty of people are experiencing Error 2100 with SSD on their W520.. somethings fishy.. help please! thanks in advance !

Answer:W520: PNY XLR8 240GB SSD with error "2100: Detection Error on HDD0 (Main HDD)"

Hello,
I don't have a ThinkPad W520 or a PNY SSD, but could it be simply that the SSD is coming loose inside the ThinkPad's chassis?  I suppose this could occur if a 7mm high SSD was inserted into a 9.5mm high 2.5" drive bay with a ~2mm spacer to "pad" the unused vertical space.
 
Regards,
 
Aryeh Goretsky
 

3 more replies
Relevance 20.5%

Hi, I got this error message this morning right after trying to get the laptop off standy off and it froze, so re-booted and voila this error came up... have read up a bit about it, and it seems I'd need to get a BOIS uprgade done, but dont know how to go about it now that I can't log-on... The bigger problem is that Lenovo does not support the T61P in India, andif I cant fix it by myself I am left saddled with a a very heavy paper weight! Thanks,Conred

Answer:ERROR 2100: HDDO (Hard Disk Drrive) initialization error (1) with T61P

Hi Conred, http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67989 here is the link to the bootable bios update for you T61P. should work if there's no prob. with your HD. Jay





T61P(6459-CTO) T9300 @ 2.5 GHz, 4g ram, Quadro FX 570M, Vista Bus. 64Bit, 160gig 7200 rpm HD, WSXGA disp.

2 more replies
Relevance 20.5%

I have an Acer 6920, Vista, and I have taken the following actions after the computer would not boot:
a. ordered reinstall disk from Acer
b. reinstalled the system using the four disk
c. worked with computer normally for three weeks
d. encountered the original problem again of not booting
e. tried to go back to factory settings using the reinstall disk from Acer
f. after 65%, encountered the 0XD00000A error
g. tried again, and encountered the same error

Is this a Vista problem, an Acer problem, or something that happens often?

Any help would be greatly appreciated.

More replies
Relevance 20.5%

I get all those messages at start up, plus superfetch has stopped working, and sometimes windows explorer has stopped working. I know it's some type of virus from something. So far safe mode has been working (slowly). Yesterday I had a friend reinstall(?) vista on it so I'm not sure if it would qualify as a legal copy or not anymore but it was actually much worse before that. It couldn't even start up right normal or safe mode.

it is a hp G60t-200, and the OS is vista, I'm not sure what other info would be needed for this. Please help if you can.

More replies
Relevance 20.5%

I dont know how this started but i need major help please.... When I turn on my computer I receive an AutoIt Error, Line -1, Something went wrong with " Object" and when i dismiss the warning later on I receive Data Executive Win32 Prevention Errors and memory reference errors. I have read alot of forums for help. I have ran malware programs, virus scans, etc.... No luck its just getting worse and slowing down my computer and now I get a blue screen when I try to boot up in safe mode and the drivers loading screen comes up. What do I do?

I read the instructions for posting this type of post, and I have attached the logs requested.



.
DDS (Ver_2011-08-26.01) - NTFSx86
Internet Explorer: 8.0.6001.18702
Run by patesag at 16:03:47 on 2012-06-08
.
============== Running Processes ===============
.
.
============== Pseudo HJT Report ===============
.
uStart Page = hxxp://bakerhughesdirect.com/
mStart Page = hxxp://search.searchonme.com/
uInternet Settings,ProxyOverride = *.local
BHO: AcroIEHlprObj Class: {06849e9f-c8d7-4d59-b87d-784b7d6be0b3} - c:\program files\adobe\acrobat 7.0\activex\AcroIEHelper.dll
BHO: DivX Plus Web Player HTML5 <video>: {326e768d-4182-46fd-9c16-1449a49795f4} - c:\program files\divx\divx plus web player\ie\divxhtml5\DivXHTML5.dll
BHO: PlusIEEventHelper Class: {551a852f-39a6-44a7-9c13-afbec9185a9d} - c:\program files\nuance\pdf professional 7\bin\PlusIEContextMenu.dll
BHO: Groove GFS Browser Helper: {72853161-30c5-4d2... Read more

Answer:AutoIt Error, Data Prevention Win32 Error, and Memory Reference Errors.... Help!!!!!!

When the drivers loading screen comes up during safe mode boot the computer goes to a blue screen. I never faced this problem before. Please help....

19 more replies
Relevance 20.5%

Edit: Think my hard drive may be failing and was the cause of my file synchronizing crash. I use it mostly to stream music and video and access the hard drive a lot. Any advice thanks

HDDStatus - Tool to check hard disk status, health and reliability

Hey,

I've been using GoodSync for the past couple of months to chain synchronize 3 hard disk drives and ran into my first issue today. GoodSync stopped responding whilst synchronizing changes to files so I used task manager to manually end the process.

I'm not entirely sure how much damage has been caused but when I re-analyzed the file changes a lot of the changes prior to the crash was no longer listed.. So I'm unsure of the file integrity but have so far noticed some music video files are corrupt with cyclic redundancy check errors but is not easily visible to check corrupt files because they still play but parts of data are missing.

I think I've experienced cyclic redundancy check errors before when my external hard drive fell flat on it's side whilst it was playing music (3 years ago). It took me a long time to filter out the bad files because all the mp3 files worked but some songs would randomly play in others etc.. is their some type of automated CRC scanner or method to check all my files ?

Thanks

Answer:Error copying file: Data error (cyclic redundancy check). CRC Scan ?

If you are able, try this programme, it is VERY good. HDD Regenerator - Dmitriy Primochenko Online

1 more replies
Relevance 20.5%

Hello, i am having a problem i get
Stop: c0000221 unknown Hard Error /system/system32\ntdll.dll

What im trying to do is formating my computer i restart my pc then i boot up xp cd, then it loads, and gets to say Starting Up Windows, cd stops, then goes black then blue and ntdll.dll error. I tryed reisntlaling windows, overwiritng file, please help!


(i have readed all the posts about this error to but that didn't help in my case.)

Answer:Stop: c0000221 unknown Hard Error /system/system32\ntdll.dll ERROR

Quote:





Originally Posted by oshwyn5


Xceltron: It really would be helpful if you kept it all in one thread and told us all your symptoms.
I see you have more than one thread as well as asking for help in someone elses thread. THis makes it very hard to follow.

http://www.techsupportforum.com//mic...ard-error.html


http://www.techsupportforum.com//mic...ard-error.html

http://www.techsupportforum.com//mic...any-files.html



Let me start with analysis of this error.
http://aumha.org/win5/kbestop.php




If you are getting this error when trying to reinstall from your XP cd, then it sounds like you have a loose damaged or incorrect cable to either your cdrom or hard drive. I suggest replacing them both with quality 80 wire 40 pin IDE cables. It can also be caused by incorrect configuration if you have RAID or SATA drives.
Finally you may want to try with just one stick of RAM installed. If you have more than one now; you should try each in the slot nearest the processor all by itself until you rule out one of them being bad (If it works with one stick and not the other, you know the other is bad).

There is more information on possible causes of this error at ahuma ; but my first suspicion on seeing the image checksum mismatch is that the file in question has been replaced with something else, a trojan or virus.

Please download
Mcafee stinger multivirus removal tool
Install and run

Spybot search and ... Read more

9 more replies
Relevance 20.5%

I am trying to download OOTP 11. I keep getting error messages....first it will come up...error reading from file(and than the file name)..than an .exe. is not a valid message error....than a not a valid win32 application error. I am downloading on windows xp, and from a disk. I would appreciate any help given. Thank you!

Answer:not a valid win32 application error/ error reading from file errors downloading

This is the program you want. There are both Windows and Mac versions. Make sure you have the right one. Also, try an alternate download site.QuoteOut of the Park BaseballFrom Wikipedia, the free encyclopediaJump to: navigation, searchOut of the Park Baseball 11Developer(s)    OOTP Developments Publisher(s)    OOTP DevelopmentsPlatform(s)    Mac OS X, Windows, LinuxRelease date(s)    April 2010Genre(s)    Sports ( Baseball), SimulationMode(s)    Single playerMultiplayer (Hotseat, TCP/IP)Media/distribution    Digital DownloadSystem requirementsWindows: Windows Vista or XP, AMD or Intel Dual Core 2 GHz, 1 GB RAM, 1024x768 32-bit display, 1 GB HD spaceMac OS X: Mac OS X 10.4.8, PowerPC G5 or Intel Core Duo 2 GHz, 1 GB RAM, requires OpenGL support for face generationOut of the Park Baseball, abbreviated as OOTP, is a text-based baseball simulator for career, historical, and fictional play. OOTP was originally written in 1998, when lead developer Markus Heinsohn sought to combine realistic replay baseball simulation with career play to satisfy hardcore fans and casual gamers alike. OOTP does not hold a license from nor currently have any affiliation with Major League Baseball.http://en.wikipedia.org/wiki/Out_of_the_Park_Baseball

4 more replies
Relevance 20.5%

Hello and good evening to you all, I urgently need some help please and i'm HOPING that there is a solution here here please. My neighbour brought her laptop round to me this evening, that she was listening to music on it yesterday, and it just went off. I though it was a virus, as ive sorted out her laptop for her before, when it had a vius,...but this time it seems different.
Its a Windows vista laptop, and she's had it for about 3 years now. Its a compaq laptop. All her music, word docs, family photos are on her laptop, and NOTHING is backed up anywhere.
I've switched it on and I get the exact following message: LOADKEY FAILED WITH ERROR 1009 (STHIVE#0)
SO ive tried it in safe mode with f8, and sstill same message,....
Ive switched it back on, and then it askes whether to launch startup repair(recommended)..
I clicked on yes, and it said loading files........
Them it takes me to the system recovery options screen,...where it says Uk, and tells me to select next....
I've stopped here as ive no idea wheterh it'll will work ir actually WIPE the whole laptop, and hence my neighbour loses ALL her stuff on the laptop..which I dont waht at all.
Any suggestions please???

Answer:Urgent Help needed...Error Message: LOADKEY FAILED WITH ERROR 1009 (STHIVE#0)

Hi - you should be fine -I had a start up problem once (not same one) and used the start up repair and it sorted it without affecting my data - may be worth awaiting a second opinion from someone who knows what the problem is though!

10 more replies
Relevance 20.5%

Hi.

I'm really not good in computers and things, but I'll try my best to describe the error in my laptop:

I have a Satellite A200 (with Vista) I bought about 4 months ago here in Australia. It has a virus last week, so I made the recovery disk on 2 brand new blank DVDs using the Recovery Disk Creator and the creating process ran smoothly with no glitches.

Straight afterwards, I ran the recovery disk in what I think is called the boot menu? Anyway, after a couple of minutes I kept getting an error message that has something to do with "Preinst.swm file". After a few times of clicking "continue" and seeing this same error message, clicking "skip", and running the 2nd DVD, an error message shows "Error: F3-F000-0008".

Now I'm assuming that the preinst.swm error message is due to probably a scratch in the recovery disk, or some fault in the DVDs that I used and not with the actual laptop itself. I just need confirmation from you guys about this.

I'm guessing the best way to go about is just to get another Vista recovery disk (from the shop I bought the laptop from) then? Or is there another way to solve this problem that I can do before heading off to the experts? I use this laptop for work so really - no laptop, no work done!

Thanks in advance.

Answer:Satellite A200: Recovery error - Preinst.swm file Error: F3-F000-0008

Really not easy to say why the recovery procedure does not work.
But for me one thing is clear.
If you have 2 recovery DVDs, you have to boot always from the first one!!!
If you will boot from wrong DVD, you will get always an error message.

In my knowledge the Toshiba notebooks for European market are delivered together with all necessary CDs/DVDs and the Recovery medium is always in the package.
I don?t know why Toshiba Australian didn?t send the Recovery DVD together with the notebook. Maybe the Recovery DVDs are simply to available and they provide only option for a recovery creating?. Who knows...

However, it?s worth to try contacting the authorized service provider in your country and to ask if you can order a new Recovery CD for you notebook.

Good luck and best regards

1 more replies
Relevance 20.5%

I am on my 4th SSD in my Windows 10 laptop that has been getting SMART error 2000-0151. We have replaced the motherboard, the SSD, and the connector cable between the SSD and motherboard.

One thing is that I've been using Macrium Reflect to clone the drives. The new drives work for a few days with no errors, then I start getting the SMART warnings. I'm wondering if the cloning process I'm using could be causing this (and if so, any advice for avoiding/fixing the issue), or whether it's possible that I'm just having a string of bad luck with these drives.

These are WD SSD drives in an Alienware laptop. It's still in warranty and they said they will probably replace the entire laptop at this point.

More replies
Relevance 20.5%

Hi All
system info : HP LAPTOP DV6 -1256tx , windows vista sp1 32 bit
When I am trying to install windows vista sp1 from recovery disks/partition I am getting the error from recovery manager prompting me to choose either to retry or see the details for failure : CTOERROR.flg in form of notepad on my desktop. I have done retry 100 times but to no avail. I cannot restart after this recovery failure message as it shows dialog box on restart: windows security update is not installed successfully or is not trusted.So, i have to go through recovery process again to see the desktop (everything functioning - internet,video, music all) but only once.
Last time i got this message too . When i did installing windows from recovery disks few months back, that time i figured out to install all imp. updates through automatic windows update.All the updates were installed successfully and then it restarted and gone through process of language settings,time settings and all....
But this time when i am trying to update windows, i am getting windows update error 0x643 which is for security update for .net framewrok 3.5 sp1 and family update.I do know the answer how to get away with this error from "windows help" and also from this forum too, which asks for installing .net framework updates from windows update site directly. But the problem is:
Windows update ask me to restart after automatic or manual windows update installation takes place and restart causes problem as it shows d... Read more

Answer:Windows vista recovery error CTOERROR.f​lg and following that error 0x643 while insta

Do you have the original (no SP1 or SP2) Vista installed? You won't be able to install SP1 otherwise.

7 more replies
Relevance 20.5%

no matter how many times i clean the drive it will still come up with this error. i can't figure out what is going on. i am able to convert the movie just fine but when it comes times to write to blank dvd, it won't do it. this is the problem i am having on my laptop which i will include the log. for some reason on my pc the program convertxtodvd doesn't even acknowledge that i have a dvd drive , i believe it is the pcouffin, which i have uninstalled and reinstalled but i cannot get it to work. it says it is working fine but device no longer available. well here is the log from my laptop which will convert but will not finish the copy.

2/20/2008 1:29:47 AM info ********** Report session closed ***********
2/20/2008 1:29:30 AM error BURN: Write error at 0 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burner is dirty)]
2/20/2008 1:28:14 AM info BURN: Write started 894784 sectors to write
2/20/2008 1:28:14 AM info BURN: Writing speed requested x4.0, effective x4.0
2/20/2008 1:28:13 AM info BURN: Available write speed: 8x, 6x, 4x, 2.4x
2/20/2008 1:28:13 AM info BURN: Media ID: SONY-D21-00
2/20/2008 1:28:13 AM info BURN: Media type: DVD+R
2/20/2008 1:28:13 AM info BURN: Multiword DMA Mode 2
2/20/2008 1:28:11 AM info BURN: Scanned files #8, folder #2 - total size 1831393280 b. (1.71 Gb.)
2/20/2008 1:28:11 AM info BURN: Inserted media type : DVD+R
2/20/2008 1:28:11 AM info BURN: Write started
2/20/2008 1:28:10 AM info --------... Read more

Answer:Write error at 0 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burne

Replace the laptops burner... Laptop/notebook CD/DVD R/W's are very delicate and are more subject to failure than desktop writers
 

3 more replies
Relevance 20.5%

I have windows live mail 2008 Build 12.0.1606 installed on windows xp and everytime a few seconds after i close wlm i get a windows live mail encountered a ploblem and has to close error that tells me to send a report..this happens 80 percent of the time after i close the windows live mail application...By the way i have disable error reporting checked on advanced properties and disabled on services also ...i noticed on the task manager that the wlmail exe process is still running after i close the application and that seems to be the problem..Is there any way, fix or some program that i can get the wlmail.exe process to close at the same time i close the windows live mail application so i dont get this send error report message anymore ?

error i get ^

wlmail.exe still running after closing application ^

Answer:windows live mail 2008 (Build 12.0.1606) error report error

Hi gbp007,

Try to End Process the extra wlmail.exe file in the Task Manager Processes to see if it will stop the error for you next time.

Task Manager - Open and Close Applications and Processes

Shawn

13 more replies
Relevance 20.5%

Stop: c0000221 unknown Hard Error /system/system32\ntdll.dll

I get the above error while i try formating my computer. i restart my pc then i boot up xp cd, then it loads, and gets to say Starting Up Windows, cd stops, then goes black then blue and ntdll.dll error. Another error

Missing Operating System

I get this error when i try to start my computer.

I am using a compaq laptop......Please help me out.

Answer:Stop: c0000221 unknown Hard Error /system/system32\ntdll.dll ERROR

Hello ,

what you need to do is erase the harddrive then do the reinstall , you can get a free program that you can create a bootable cd to do this with from here

(http://www.majorgeeks.com/Dariks_Boo...uke_d4596.html)

or you can download the tools to do this from the manufacturer of the harddrive

either way you will have to make the bootable cd

make sur you read the instruction on the way to use the program

then start your system then put in the cd / reboot to load the cd and then erase your drive

depending on the size of your dive this can take from 1 to 5 hrs

this will write the drive to zero's and make it as if it never had software install on it ( like new from the factory)

Mike R.

2 more replies
Relevance 20.5%

I posted this earlier but reposted this and erased the old thread because I have more information now and have narrowed down the problem (I hope).This problem just happened yesterday after I had to manually shut down (used power button) my computer after it froze. Now when I try to load up IE, it "halfway" opens up (you can see parts of the interface) and just freezes. I thought maybe it was an IE problem, but if I try to load up Firefox (even without loading up IE first), nothing happens -- it won't load. I load up the Task Manager and firefox.exe is there as a process even though it hasn't loaded. The only way I did figure out to surf the net is to load up "My Computer" and enter a web address from there manually. But even when I do that, if I click on any link that opens up a new window, IE will try loading that new window up which freezes. Right after this happened, I get a "Generic Host Process for Win32 Services Error" (still do every now and then. I also d/l'd the "patch" for this from Microsoft's website to no avail) which says something about svchost.exe and some other exe's. I think it has something to do with networking because I loaded up "Event Viewer" from the Control Panel and I managed to track down the error I get *each* time my computer starts up These errors I get are *all* dated right after I had to manually shutdown the computer and when the problems began. Here it is:Source: DCOMEvent ID: 10005DCOM got e... Read more

Answer:Generic Host Process For Win32 Services Error / Dcom Networking Error -- Help!

Hi and welcome to Bleeping Computer! My name is Sam and I will be helping you. Please download ComboFix and save it to your desktop.Double click combofix.exe and follow the prompts.When it's done running it will produce a log for you. Please post that log in your next reply.Important Note - Do not mouseclick combofix's window whilst it's running. That may cause it to stall.

12 more replies
Relevance 20.5%

Help, can't print anything and can't find out how to fix that error code

Answer:Printer Spooler has a error message <Failed to Read Description. Error Code: 193 >

Hi, go to start search and type:- cmd, right click on the returned cmd.exe and select "run as administrator" at the prompt (copy paste)


Code:
sc queryex spooler > 0 & notepad 0
(press enter) I am guessing we will see error 1058.

Next still at cmd type:-


Code:
net start > 1 & notepad 1
(press enter)

Please post both notepad entry's here.

4 more replies
Relevance 20.5%

During Windows backup, which wants to backup the 'C' drive and my games drive 'E' (for some reason), I get the following error message after the 'C' backup has completed but not the 'E':

'The backup operation that started at '‎2015‎-‎12‎-‎20T06:00:25.459859400Z' has failed with following error code '0x8078012D' (The operation failed due to a device error encountered with either the source or the destination. If the source or destination volume is on a disk, run CHKDSK /R on the source or destination volume, and then retry the operation.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.'

I ran CHKDSK \R and received several errors of the type: 'A disk read error occurred 0000185. The disk does not have enough space to replace bad clusters detected in file xxxxxx of name xxxxxx.'

My 'E' drive is 2TB with 205GB free. I really don't believe that the cluster(s) in error are bigger than 205G, but what do I know?

Anyone have experience with this problem?

Thanks.

More replies
Relevance 20.5%

I am trying to install cakewalk SONAR 7 and I get this error when running the installation and start the small window on "c++ 2005":

"Error 1935. An error ocurred during the installation of assembly
'Microsoft.VC80.ALT.type="win 32", version="8.0.50727.762", publickey Token="1fc8b3b9a1e18e3b", processor Architecture="AMD64". Please refer to help and support for more information."
-------------------------------------

When I checked the event viewer, I have a Vista application event ID 33, with the description below,

"Microsoft.VC80.MFC,processorArchitecture="amd64",
publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762"
Could not be found. Please use sxstrace.exe for detailed diagnosis."
--------------------------------------

When I try to run the sxstrace.exe, I have then this message (the error message is in blank.):

"C:\Users\Xxxxx Comp>sxstrace parse -logfile:sxstrace.elt -outfile:sxstrace.txt
Parsing log file sxstrace.elt...
ProcessTrace failed. Error message is:"


I been google this problem and try different approaches for the last 3 days and nothing fix this problem. I try to install microsoft visual c++ 2008 and c++ 2005 and have similar errors.
Any help in this matter will be highly appreciated, right now is a "dead end"...

Thanks, guys in advance for the help in this matter...

Answer:"Error 1935. An error ocurred during the installation of assembly 'Microsoft.VC80.AL

Hi,

Just to confirm for us, install the Visual C++ redist 2005, then VC++ redist 2005 SP1, then VC++ redist 2008, then VC++ redist 2008 SP1. Only restart PC after last one has finished and do them in order, one at a time. This will take quite a long time, let them finish. Then run windows update and select everything, in particular the updates for the VC++ redists (mainly security updates) and restart PC again. Tell us if anything here fails and any error messages you get. Are any of your applications getting side by side configuration errors? Then try your program install again. Hopefully it will now work. Tell us what happens. Will try and post links later as this post sent off iPhone.

Hope this helps, though you may have already done this.

Richard

P.S. You could try sfc /scannow though I really doubt it will help.

EDIT:

Here are the web addresses in the correct order:

http://www.microsoft.com/downloads/d...displaylang=en

http://www.microsoft.com/downloads/d...displaylang=en

http://www.microsoft.com/downloads/d...displaylang=en

http://www.microsoft.com/downloads/details.aspx?familyid=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

2 more replies
Relevance 20.5%

I have installed a Vertex 2 (2VTXE180G) some time ago in my Thinkpad T410 (2522-3FG). The installation was successfull, but after less than a week I got the 2100-Error.I thought, that the SSD could be damaged, so I sent it to warranty.Last week I got the replacement drive and today I wanted to install the drive. But it did not work. 2100-Error since the first boot. Is this a problem with T410 and the Vertex2 SSD?Should I send the drive to RMA or should I choose another drive? Does somebody run this combination without problems? Thanks,André 

More replies
Relevance 20.5%

I posted this earlier but reposted this and erased the old thread because I have more information now and have narrowed down the problem (I hope).

This problem just happened yesterday after I had to manually shut down (used power button) my computer after it froze. Now when I try to load up IE, it "halfway" opens up (you can see parts of the interface) and just freezes. I thought maybe it was an IE problem, but if I try to load up Firefox (even without loading up IE first), nothing happens -- it won't load. I load up the Task Manager and firefox.exe is there as a process even though it hasn't loaded. The only way I did figure out to surf the net is to load up "My Computer" and enter a web address from there manually. But even when I do that, if I click on any link that opens up a new window, IE will try loading that new window up which freezes. Right after this happened, I get a "Generic Host Process for Win32 Services Error" (still do every now and then. I also d/l'd the "patch" for this from Microsoft's website to no avail) which says something about svchost.exe and some other exe's. I think it has something to do with networking because I loaded up "Event Viewer" from the Control Panel and I managed to track down the error I get *each* time my computer starts up These errors I get are *all* dated right after I had to manually shutdown the computer and when the problems began. Here it is:

Source: D... Read more

More replies
Relevance 20.5%

Hi,

I've been having Kernal data inpage error which I assume is from a faulty harddrive (or maybe the RAM?!). I occasionally get a disk check during bootup, which didn't seem to help. I was saving up to buy a hybrid SSD/HDD drive before replacing it, but now it seems a bit too late.

Yesterday after a windows update, I rebooted my computer and the desktop was running very slow, nothing would open, explorer.exe would crash, I would be stuck in desktop until I force shutdown by holding the power switch (Shutdown didnt work), after doing this once or twice, I now get a BSOD again with a registry error right after the desktop loads for 1-2 seconds. X051 error code I think.

What step should I take now to diagnose the problem?
Thanks!
 

More replies
Relevance 20.5%

Hi,I have fundamentally the same problem as Laura H from this thread http://www.bleepingcomputer.com/forums/topic342716.html.I've had problems with these fake antivirus programs before and they really did a number on my laptop. I treated the problem using various tools mostly malware bytes and deleting some suspect files.Been working fine for the most part however today out out of nowhere I was attacked by malware doctor. I deleted the suspect file from the temporary internet files folder and ran malware bytes that detected trojan and deleted. Shortly after drwatson ??? was shut down and some time later I think explorer shut down because my desktop went back to basics....no theme,desktop wallpaper etc. the windows 95 look if you grasp what I'm trying to get at. I thought it was no big issue and in my own time restarted laptop when I realized audio wasn't working after trying to play a film.Upon restart I get the blue screen with the same message as Lauras. So for the most part I'm in the same situation as Laura with some minor differences such as I didn't use Spy doctor etc.I have Kaspersky AV installed which has been inefficient in protecting my laptop lately, especially from these fake AV attacks. I am using Windows Firewall which I know is a bad idea.Myrti was helping Laura resolve the issue and I have followed her instructions upto the following actions:'locate this file and right click it > choose rename > rename it to userinit.txtnow we wi... Read more

Answer:Malware doctor infection removal and then error c000021a (fatal system error)

Hello,Please follow the instructions in ==>This Guide<==. If you cannot complete a step, skip it and continue.Once the proper logs are created, then make a NEW TOPIC and post it ==>HERE<== Please include a description of your computer issues and what you have done to resolve them.If you can produce at least some of the logs, then please create the new topic and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the topic and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.Orange Blossom

6 more replies
Relevance 20.5%

Hello, I upgraded my X120e to windows 10 but continually get a windows update error for the Conexant audio.  Has anyone run into this and found a solution?Thanks.

More replies
Relevance 20.5%

My System :
Windows XP Professional
Intel core 2 duo CPU T8100 @ 2.10GHz
1,99 gig of ram
Mobile Intel GMA X3100

My system sometimes restarts both in and out of games and so far have left these 2 events both 1003 and mini dumps as follows:

Event ID: 1003, Category: 102, Source: system error.

Error code 000000f4, parameter1 00000003, parameter2 87f91020, parameter3 87f91194, parameter4 805d297e.

Please help me, don't know what to do!
 

Answer:Random restarts -event id 1003 -system error- error code 000000f4

Your error is 0x000000F4: CRITICAL_OBJECT_TERMINATION
One of the many processes or threads crucial to system operation has unexpectedly exited or been terminated. As a result, the system can no longer function. Specific causes are many, and often best resolved by a careful history of the problem and the circumstances of the error message. One user, who experienced this on return from Standby mode on Win XP SP2, found the cause was that Windows was installed on a slave drive


The driver citted is crsss.exe and is an important part of your Windows OS.


See this link and read #2 to get some idea f what this driver does: http://www.liutilities.com/products/wintaskspro/processlibrary/csrss/


* It might pay you to do a security scan with your antivirus, etc.
 

1 more replies
Relevance 20.5%

I did tried to update an old modem about a week ago and ever since I cannot connect to the internet. I have two laptops and works fine. I have a wireless set up.

I just tried plugging in the Ethernet connection to the laptop to no avail. Still no connection.

Info:

HP Compaq nc6230
Wireless setup

I tried connecting to other unsecured wireless networks in the area and still was not able to access the internet.

Please help.

Thank you.
 

Answer:Laptop cannot connect to Internet - DNS Failure, Gateway Error 0x2afc, Error 12007

8 more replies
Relevance 20.5%

I'm getting this error as well on my Dell Inspiron 1520 error code 2000-0142
Validation code 120630

Answer:I'm getting this error as well on my Dell Inspiron 1520 error code 2000-0142

The hard drive has failed - replace it with a new 2.5" 9.5 or 7 mm SATA hard drive  and reload the OS.

1 more replies
Relevance 20.5%

Hi there,
I did a search on google and through these forums search function but all I can seem to find are topics about vista and backing up problems. I did find a link to a microsoft hotfix for my problem, but it was only for specifically 4GB+ of Ram and an nVidia USB EHCI. Sadly I do not meet these specs.

The problem started with copying a bunch of files over from one external HDD to another (friend's to mine). It froze about half way through and locked up my whole computer. This had happened once (I think, maybe twice?) befor when copying files from my C drive over to my external, and turning my PC off/on again sorted it out.
Since then my external is experiancing a host of problems. It doesn't shut off if you unplug it from the computer or turn the computer off, it's always whirring. It's greyed out if you go to safely remove hardware. Opening a media file in anything gives an error (eg. VLC gives this error):
File reading failed: VLC could not open the file "E:\Insert File Here".
Your input can't be opened:
VLC is unable to open the MRL 'E:\Insert File Here'. Check the log for details.Click to expand...

Upon trying to copy anything to or from the HDD and trying to move/delete any files, it gives me the old error in the topic title: 0x8007045D I/O device error.

I expect one solution is to completely re-format my external HDD, but I can't stress how much I REALLY don't want to do that without being able to get mos... Read more

More replies
Relevance 20.5%

Well I built this computer in september of 2011 everything was running great no problems at all until today. I left it on and went to the store came back and BSOD. My computer restarted before I could write down any information "Error code" system restore said it was a "unknown error" which terminated my system. My Computer is running fine but I would like to make sure nothing is wrong. I'm thinking it may be my mother board because one of the SATA slots is broken and I had to switch to another one.

System specs
Cpu: Core i7 2600k
OS: windows vista home premuim 64 bit
Motherboard: Asrock p67 extreme4
Memory: 4 gb Corsair vengence "will increase to 8+ as well"
Harddrive: 1TB
Graphics card: 8600GT "will upgrade when BSOD is solved"

If you need anymore information I have the app on my phone and should be able to response quickly. The resource and Performance monitor file says I have no Anti-virus program but I do.... Also says the only thing that failed was system service checks - abnormally terminated service check

Answer:BSOD. error Custom built computer. error unknown between 0 or 1077...

Here is the Full resourse and performance file

9 more replies
Relevance 20.5%

Ok, firstly I will give my computer stats.
Asus motherboard M2N4-SLI
EVGA Geforce 8800 GTS 320 MB
Athlon X2 5600+ dual core
2GB corsair ram
Creative X-Fi extreme gamer card

My computer is about 3 weeks old and has been running just fine, playing all games properly. The only small problem i had was my motherboard cpu fan not working in its cpu fan pin, so instead i have it hooked up to a case fan pin. I am not sure if this means i have a faulty mobo or not.

Just yesterday I installed my brand new Creative sound card, I installed its software and drivers all fine and the PC restarted fine. Next creative wanted to update the drivers and I let it. After it was done installling the new drivers it needed a restart. On restart I could not even get to the post screen and was displayed with an error saying USB over current, PC shutdown in 20 seconds. At first i could not get past this error at all, so i tried taking out the sound card and putting inserting it again. I did not get the USB error now and was happy. I played Battlefield 2142 for a few hours then shut it down. Now today when i get home from work and turn it on i saw that USB over current error again and got quite frusterated. After taking the sound card out and putting it back in I had some new problems. I only saw my Asus Splash screen saying "press delete to enter setup" although pressing delete did nothing, it just hung on that screen.

After that i manually powered off and now i was receiving no screen a... Read more

Answer:Video Card post error, USB overcurrent error, possible failed mobo

Welcome to TSG....

First thing I would do is get the cpu fan working. usually they have several screws the hold them to the heatsink, I hope you did not take the heatsink off the processor because there is usually one of two things between the heatsink and processor, either a white goo called thermal compound or a little white square material that is thermally conductive if either of these have been disturbed or damaged it can cause the processor to overheat very quickly.
I would get a new fan assembly and remove the 4 screws and mount the new one on top of the heatsink and get it running.

Then worry about the rest of the things afterwards.
 

1 more replies
Relevance 20.5%

Hi Guys,
In our org. recently the intranet portal is being launched having webpages built using Html5 & CSS3, everything seemed to be working fine until we had this issue of printing via all Internet Explorer browser version.
Issue Description:
Couple of symptoms of the issues when trying to print.

The printer name is invalid (res://ieframe.dll/preview.js)The remote server machine does not exist or is unavailable (res://ieframe.dll/preview.js)Whenever print is fired the printer goes in hung state, we have to power off and power on the same
Observation:

The same webpage when we try to print using Mozilla firefox / Google chrome there is no issueThe print model is HP LaserJet M4345 MFP seriesThe printer is installed using TCP configuration on member server and the printer is shared for client PCs(Windows7/8.1)As soon as the print is fired on the server where printer is configured observe event ID 10 which states print was successful

Document 161, URL - website owned by UserA was printed on HP LaserJet 4345 mfp - IT PCL 6 via port IP_10.14.1.132. 
Size in bytes: 499992; pages printed: 1
We also tested the print on several other printer model like Lexmark and the issue is same.If the printer is configured locally using USB and tried to print ? print is successfulIf we print to XPS doc, it prints properly using IE for that pageTried to trace what?s happening using netmon when print is fired using IE and below is the screenshot



Came across this re... Read more

Answer:Unable to print using Internet Explorer, Printer error 49. 4C02 - Error

Thanks guys for your help, the issue seemed to be fixed as it was identified by application team there was some issue(might not be compatible with IE & specific printers) with the font.

The font used in the application was 'Open Sans Light','Open Sans Regular', 'Open Sans Semi Bold' belonging to the 'Open Sans' family of fonts.We downloaded the Webfont from Google FontsWe tried printing the font in the HP printers which caused the 49.4C02 error.

9 more replies
Relevance 20.5%

Okay I am at wits end.

When I hit send and receive all 3 accounts the User has setup fails to receive anything.

I get the following error -

Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'XXXXX', Server: 'XXXXXX', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 10053, Error Number: 0x800CCC0F

Now I read a TON of web pages prior to posting so please make sure to read what I have tried before posting a thought on the fix -

I tried everything on this KB - http://support.microsoft.com/default.aspx?scid=kb;en-us;813514 except OE reinstall because this is a PC that has OE integrated and to be honest I can't get the account info if I have to wipe it and reload it for another week (but it has to be fixed now)

Basically I have tried the following -
1)Uninstalled AV - No change (even the same socket error number and standard error number).
2) Made a new identity - No change
3) Changed time delay for getting emails up to 5 mins - No change
4) Uninstalled Firewall - No change (even windows firewall is disabled)
5) Checked MTU (it was right also wasn't really thought of as the culprit because all other PC's on the same network get their emails just fine.
6) Tried a system restore but that seems to be fubar as well and none of my old restore points work.

I did do a Hijack This, Ad-Aware, Spybot, Ewido and more scan no prob... Read more

Answer:XP OE 6.00.2900.2180 - Socket Error: 10053, Error Number: 0x900CCC0F

10 more replies
Relevance 20.5%

Occasionally, the computer will freeze up and make the "dieing" clicking noise, with the hard drive working furiously. Usually, I preform a hard reset, but on two occasions, I let the computer run, and I recieved similar blue screens of death, with the hard drive access light solid.

The first:
KERNEL_DATA_INPAGE_ERROR
...(usual info on what may have caused error, how to start safe mode, etc)
*** STOP: 0x0000007A(0xC03E11F0,0xC000000E,0xF847CC22,0x009A2860)
*** atapi.sys-Address F847CC22 base at F846D00, DateStamp 3db88971
Beginning dump of physical memory.

The second:
KERNEL_DATA_INPAGE_ERROR
...
*** STOP: 0x0000007A(0xC03E17C4,0xC000000E,0xF85F1642,0x0B486860)
*** ftdisk.sys-Address F85F1642 base at F85E7000, DateStamp 3b7d8419
Beginning dump of physical memory.

On the next occasion, I was trying to replicate the error after a day of no trouble, and did so by entering standby mode, then starting the computer back up. Surprisingly, I got this after saving a file(which, btw, didn't save)

KERNEL_STACK_INPAGE_ERROR
...
*** STOP: 0x00000077(0xC000000E,0xC000000E,0x00000000,0x009520000)
Beginning dump of physical memory.

After the error messsage, the computer auto-restarts, and runs really slowly, requiring a shut-down, wait a minute, start-up

According to microsoft, the second parameter in each of these is the status (http://www.microsoft.com/resources/d...d_stp_fvlq.asp), and 0xC000000E is STATUS_NO_SUCH_DEVICE. I have run mulitiple test... Read more

More replies
Relevance 20.5%

First my machine specs:

http://www.evga.com/community/ModsRi...asp?sysid=5160

Im using Windows 7 Ultimate x64.

Im having some issues with my computer freezing, this occurs while using a "patcher" to download content to a mmo game and sometimes while playing 3d games.

My event viewer has this all the time:

--------------------------------------------------------
A corrected hardware error has occurred.

Reported by component: Processor Core
Error Source: Corrected Machine Check
Error Type: Generic Cache Hierarchy Error
Processor ID: 0

The details view of this entry contains further information.
--------------------------------------------------------

[ Name] Microsoft-Windows-WHEA-Logger
[ Guid] {C26C4F3C-3F66-4E99-8F8A-39405CFED220}

EventID 19

Version 0

Level 3

Task 0

Opcode 0

Keywords 0x8000000000000000

- TimeCreated

[ SystemTime] 2010-04-20T19:25:49.490400000Z

EventRecordID 5406

- Correlation

[ ActivityID] {954A60D4-EFE5-4F8B-B054-8D11A7E15C9D}

- Execution

[ ProcessID] 1488
[ ThreadID] 2096

Channel System

Computer blabla-PC

- Security

[ UserID] S-1-5-19


- EventData

ErrorSource 1
ApicId 0
MCABank 3
MciStat 0x9020010c0320100e
MciAddr 0x0
MciMisc 0x0
ErrorType 7
TransactionType 256
Participation 256
RequestType 256
MemorIO 256
MemHierarchyLv... Read more

Answer:A corrected hardware error has occurred, Generic Cache Hierarchy Error

Please provide this information: http://www.techsupportforum.com/f217...ns-452654.html

Although you haven't mentioned any BSOD's, the info will provide us with some details so we can try to figure this out.

In general, a machine check is related to an error that's recognized by your CPU and reported to Windows. There's not usually much information in the error reports so we have to fiddle around trying to figure it out.

Most often these are either hardware problems (something's busted) or compatibility issues (either software or hardware).

1 more replies
Relevance 20.5%

Here's what I believe is the culprit:

http://www.arikfr.com/blog/facebook-virus.html

and the error message i got after i downloaded it was Runtime Error 21 at 00DC49D2 (ncsjapi43.exe)

Now I can't install iTunes because of this:

Or Oblivion because of this

Now, I believe those two problems are linked and have something to do with the facebook virus which i have not gotten rid of.

My PC works fine, i was able to do system restore in Safe Mode at the time of the Runtime error but I don't recall running any Command Prompts.

My guess is that it's a really bad registry problem.

Can someone help me figure this out and walk me through it? Perhaps via MSNmessenger, skype, or AOL or on here? Many thanks.

Please help
 

More replies