Computer Support Forum

Intel HD, 5300, 5500, 6000, 515, 520, 530, P530, Iris 540 Graphics Driver, 20.19.15.4531, A09 not digitally signed

Question: Intel HD, 5300, 5500, 6000, 515, 520, 530, P530, Iris 540 Graphics Driver, 20.19.15.4531, A09 not digitally signed

This driver (or part of it) is not digitally signed, hence during silent install in SCCM TS Windows 7 x64 it will "hang" waiting to accept the unsigned driver (NOT during Apply drivers, but Sequence that runs setup.exe - I install ALL graphics drivers this way!)

http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=D4HM1
Had top revert to previous version
Intel HD, 5300, 5500, 6000, 515, 520, 530, P530, Iris 540 Graphics Driver, 20.19.15.4390, A05
to be able to do silent install!
Somebody else might have noticed?
Seb

More replies
Relevance 100%
Preferred Solution: Intel HD, 5300, 5500, 6000, 515, 520, 530, P530, Iris 540 Graphics Driver, 20.19.15.4531, A09 not digitally signed

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 81.78%

Hi all, Following device:ThinkPad E531Graphics: Intel HD 4000System: Win7 Pro Following problem:1) Approx. 2 month ago a windows update caused a problem with the hdmi at my laptop. There was no connection to the TV possible anymore (I tried the TV, the cable and the hdmi device already).2) I installed a new driver (origin: Lenovo support page). Result: Windows messages that the driver is not digitally signed...Hence, the device "vga save" was set. What I've already tried, everything as admin:1) look for older drivers: Got only one and it didn't work2) Tried to install a driver directly from Intel: Didn't work3) Tried to disable the signing (GPEdit.msc -  code signature ...). Here I had the problem that I even have no line with the code signature to set the ignore property4) Tried to install the drivers (Intel and Lenovo) in the testmode. The waring message about unsigned drivers came5) Tried to create a certificate. Here the cmd said the command is not known.6) Tried to install the drivers (Intel and Lenovo) after setting the "TESTSIGNING" off (BCDEdit). The waring message about unsigned drivers came My question:Any ideas or similar experiences?I can not believe that the Lenovo or Intel drivers are not signed. But why Windows does not accept them?Is the available update to Win10 an option? Generally: Failure F40 (the failure is 40 cm in front of the monitor) is not excluded  Thank you very much in advance.Regards,Stefan 

More replies
Relevance 78.01%

Dell has released an update to the Intel 530/P530 driver. This is the first update since last October. Hopefully this will fix the all too often driver crashing with "Video driver has stopped responding...." messages.
JohnD (XPS 15 9550)

More replies
Relevance 96.35%

Hey guys can somebody please help me im trying to install a vodafone 3G modem on my HP Pavilion DV7 laptop but i cant it says driver not digitally signed. Im using windows 7 home premium 64 bit

Answer:driver not digitally signed

Hello Tokelo and welcome to the forums.

Your best bet is try this - Disable Driver Signing in Windows 7

I have not tried it myself but it may help.

Report back with your findings.

Lucky

1 more replies
Relevance 96.35%

Am trying to install HP Deskjet 630c printer and it keeps telling me this driver is not digitally signed. I just put Windows xp on the computer. What does this mean and can I get help? I am not very computer literate and any help would greatly appreciated. Many thanks Paula.

Answer:driver is not digitally signed

"Not digitally signed" means Microsoft have not tested this driver and verified it to be compatible with Win XP.  This does not mean it will not work, you should click on the "continue anyway" to install your print driver.  If this is a concern you should check the HP web site for newer driver tested by MS.Kim

1 more replies
Relevance 95.53%

Good Morning From South Africa, I have a ACER Aspire E 15 Laptop and i am finding it quite difficult to find the new drivers for the gpu and when i do find it i have to uninstall the driver i have to install it. (I have not done that) I would like a guide to install the driver if someone knows how to do that without harming my pc. System specs:OS: Windows 8.1 x 64 bitRam: 4GBIntel HD Graphics 5500 (Integrated)1 TB HDDIntel i5-5200U  I need help because i would like to enhance my gaming performance a bit. Also a link to the new Graphics control panel if its out would help me too

More replies
Relevance 95.12%

G'day. I'm trying to install my old VisionPLus DVB-T card into a Windows 7 O/S box and it won't recognise any of the old drivers. When I try to install the TwinHan Digital tv software, Windows can't/ won't install them.

I've downloaded and tried the latest (DigitalTV 3.4 Build 19-02_20090212) and windows comes up with "Driver not found". I've tried to install in compatability mode but still no good.

When installing the above, it identifies my card as “PCI CX-87A with MCU DVB-S/-C/-T/ATSC card”.

Out of all the available drivers on Twinhan's site, which would be the best for my card?

Thanks
 

Answer:Driver not digitally signed so won't install

64bit Windows 7?

http://suffolk757.com/blog/2009/03/05/installing-unsigned-drivers-in-windows-7/

Out of all the available drivers on Twinhan's site, which would be the best for my card?
Click to expand...

The one written for Vista would be my choice, probably not one for W7 yet, may never be.

Looks like MS ha removed a way to disable unsigned drivers protection in Vista64, so probably is the same for 7
http://www.mydigitallife.info/2008/...-cause-drivers-not-found-in-64-bit-vista-x64/
The issue is known to affect PeerGuardian, TV tuner cards, Gigabit Ethernet adapters, CD/DVD-ROM/RW drives, and many other devices.Click to expand...

Looks like unsigned drivers are a no go for x64 Vista and Windows 7, well there are some workarounds in the article above, sounds like a hassle.
Not sure if this software will work with W7
http://www.tipandtrick.net/2008/per...iver-signature-signing-with-readydriver-plus/
 

3 more replies
Relevance 95.12%

I have NVIDIA GeForce 8800 GT with which I have had some driver issues. While checking the Driver details in Device Manager I noticed that some Driver files are not digitally signed. These are: C:\Windows\System32\nvcpl.cplC:\Windows\System32\nvcplui.exeC:\Windows\System32\nvcpluir.dllC:\Windows\System32\nvexpbar.dllCould this be causing problems with my drivers?

Answer:Driver files not digitally signed

It is my view that you should always download drivers form the Manufacturers website. To update your current drivers go hereclick here

3 more replies
Relevance 95.12%

Good evening,

I just reinstalled XP on a friends machine that was pooched. It is a Dell DIM4400. Everything is working except for the sound card. It is a built in sound card. When the computer boots up the new hardware wizard comes up asking for a driver for a realtek AC97 Audio device. I have tried everything I can to install the driver but each time I try I get an error that the driver is not digitally signed and it won't install. If I try in safe mode it installs but I get a blue screen upon startup and have to reboot. I do not have the orignial Dell cd but I have tried every driver from the Dell site that should work on this model of computer. I have updated the chip set drivers on the motherboard etc. I just can't get this sound card to work. Any advice??
 

More replies
Relevance 95.12%

Hey,

So I just upgrade to Vista x64 and 4GB of memory (courtesy of OCZ).

However, when installing the x64 version of MagicDisc/MagicISO I get the following error:

Can I get around this?
 

Answer:Required Digitally Signed Driver?

Uhmmm... yes, you can by pressing F8 at boot time and choosing to ignore the warnings about unsigned drivers, but you have to do it each and every time you boot. There is a way to permanently disable that driver signing requirement but I'm leery to give out the info anymore since it hosed a few people's machines recently.

It wasn't my fault that they chose to continue using shitty old drivers, but they blamed me for the mistake they made anyway.

Vista x64 is a more secure and stable OS than the 32 bit version, and that's one of the primary reasons why: the driver signing requirement. Disabling it or 'getting around it' will more than likely end up causing you issues at some point.

Google can find the specific method to disable the signing requirement permanently, or a search here might find it since it's been posted about 3 times over the past 4 months or so.

Good luck, either way...
 

5 more replies
Relevance 94.71%

Currently my laptop is working fine with Microsoft Basic Display Adapter, but I can't sleep my laptop or adjust brightness without installing display driver. My laptop comes with Intel HD Graphics 5500, so I tried to install this driver. But whenever I install it, either using setup.exe or from device manager, it runs well for sometimes, after what the screen starts flickering. The PC hangs with screen displaying black and white lines like an old B&W TV. After shutting it down holding the power button, whenever I start the PC, it shuts down unexpectedly. What should I do?





Shafquat

More replies
Relevance 94.3%

Hi all,

please can someone help me.....

I am trying to install my Adaptec 1430SA controller card, for use with Win7 64bit, i have been trying for hours !

I have now got as far as windows seeing the right driver for the card, but windows refusing the driver because it is not digitally signed... i have downloaded the correct driver from adpatec.com ensuring it was the driver for use with win7 64 bit...

i dont know what i should do now, ive tried booting from an ms dos diskette and loading the drivers that way, but nothing seems to work....

PLEASE HELP ME !!!

Answer:HELP! Driver is NOT digitally signed for Adaptec 1430SA

Hi press F8 when windows is starting and you can deactivate it for the time you are on, alas you have to do
it each time you reboot. Have to go will try help later.

4 more replies
Relevance 94.3%

is it necessary to sign driver in win xp 32 sp2.

when i google i got that it is necessary for win vista , win7 and other upper version.

Answer:windows require a digitally signed driver xp 32 sp2

A signed driver is not necessary in Windows. It is an extra security layer, as drivers can become corrupt by malware. If you obtained the driver from a trusted source (like the device manufacturer's website), you can go ahead and tell Windows to install it.

3 more replies
Relevance 94.3%

I'm trying to install a program, but I says I can't install an unsigned driver.






Quote:
Driver: CPU Core Temperature Monitor
Service: Logitech CPU Core Tempurature (not a typo)


I've tried Disable Driver Signature Enforcement in my bios, and DDISABLE_INTEGRITY_CHECKS in cmd.

Neither works.

Answer:Need to bypass digitally signed driver requirement.

Go to Start Menu > Run and type the following command: bcdedit /set nointegritychecks ON
Restart the PC and install the unsigned driver
After installation go to Start Menu > Run and type the following command: bcdedit /set nointegritychecks OFF
Restart your PC

4 more replies
Relevance 94.3%

downloaded samsung magician and installed it. it started up and apparently i need some sort of digitally signed driver now?

"program compatibility assistant"

"samsung magician application resource
samsung india software operations

windows blocked installation of a digitally unsigned driver. uninstall the program that uses the driver, and control releasers website to get a signed version of the driver"

Answer:samsung magician need digitally signed driver

You don't need Magician for the drive to work just fine. You may not get all the advanced features, but the drive will be plenty fast.

1 more replies
Relevance 94.3%

downloaded samsung magician and installed it. it started up and apparently i need some sort of digitally signed driver now?

"program compatibility assistant"

"samsung magician application resource
samsung india software operations

windows blocked installation of a digitally unsigned driver. uninstall the program that uses the driver, and control releasers website to get a signed version of the driver"

Answer:samsung magician need digitally signed driver

You don't need Magician for the drive to work just fine. You may not get all the advanced features, but the drive will be plenty fast.

9 more replies
Relevance 94.3%

I recently purchased a new pc that came with win vista 64 bit premium home installed. I am now reloading all my old programs and I keep getting ?windows requires a digitally signed driver" error message. I also can't seem to play my old movie files, all of which played fine when I had Win XP. Apparently Vista does not want me to make my own decisions, so I am wondering how I might go about disabling all this extra secure vista crap. Can I go into Control panel and disable the BitLocker Drive Encryption? Or do I need uninstall 64bit and install the Vista 32 bit? Would that be a smooth transition? Would all my stuff work again if I had the less securitized 32bit Vista? Thanks for any help you may provide.
Regards,
William

Answer:windows requires digitally signed driver

Welcome to the Vista forums

1) You don't want to disable UAC (User Account Control) as it does a lot to protect your computer from various malware. If you really feel the urge to turn it off, then you can in control panel in the User Account section. Once turned off, you'll get the red shield in the bottom right saying it's disabled. Disable security warnings by opening security centre and going to "change how security centre warns me" or something and choose the "no warnings" option.

2) Just download the Vista codec pack (just Google it and you should find it) and DivX and you should have no problems watching videos.

3) You can install unsigned drivers on Vista 64 bit, do this by running an elevated command prompt (right click on command prompt in Start menu and click "run as administrator".

Type this and press enter bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS

When you reboot, you should be able to install unsigned drivers.
Also, I looked on the HP website for your computer, and it has 6GB RAM, so going to Vista 32bit would only allow you to use about 3.5GB RAM. I also saw it only has an Nvidia 6150e onboard graphic card. Are you using this? As if you upgraded this to a graphic card, you'd notice better performance on Vista as well.

2 more replies
Relevance 94.3%

help !!!! i was uninstalling what i thought were unimportant stuff & accidentaly uninstalled my sound manager can anyone tell me where i can find a Windows XP digitally signed Realtek AC?97 driver

Answer:help i need a Windows XP digitally signed Realtek AC’97 driver

Hi mate,
check what make/model is your Motherboard, visit manufacturers web site and download sound driver for that type of Motherboard...

2 more replies
Relevance 94.3%

Hi

The last few times I started my computer, the system comes with the warning:

"Windows requires a digitally signed driver
Driver: Broadcom NetDetect Driver
Service: BASFND
Publisher: Broadcom Corporation
Location: C:\Program Files\Bra...\BASFND.sys"

Windows suggests to uninstall the program or device that uses this driver and check the publishers support site to get a digitally signed driver.

The problem is that I have no idea of which program or hardware is using this driver. All the drivers I have installed in my computer are from the computer manufacturer.
I have also been at Broadcoms homepage and there is plenty of things to download there. But I dont want to ruin anything.

Suggestions on what to do?

System: Windows Vista 64
 

Answer:Windows requires a digitally signed driver

Broadcom is your onboard ethernet, I don't see why it would suddenly complain unless there was an update.:confused You can disable driver signing but it only cures the symptom and not the cause.
 

2 more replies
Relevance 93.48%

Hi,
I have problem with my Intel HD graphics 5500 driver.
Some days ago my display started to show distorted objects when I scrolled down, so I updated my driver to the latest Intel's one. The updated drive caused problem with starting my Windows 7 64 bit. The Windows did not start at all.
So I uninstalled the Intel's driver and install this one from your site, which is recommended for my device. My Intel HD graphics 5500 driver does not recognize your driver at all.
How can I resolve this issues? 

More replies
Relevance 93.07%

Hi, I have changed P50's VRAM in BIOS setting to 512MB, however, it is still showing as 128MB under Windows 10. I have a Xeon and 16GB EEC RAM.  I am wondering if anyone knows how to correct this? Or it is simply a display issue.  The system has the latest BIOS 1.24.  Thanks

More replies
Relevance 93.07%

I have x220 with Windows 7 Pro 64 bit. Device manager shows under Storage Controllers "Ricoh PCIe SDXC/MMC host controller," but there is a yellow triangle with "!" and a Device Status Code 52 message "Windows cannot verify the digital signature for the drivers required for this device." I checked in C:\Drivers\WIN\Multicard and found two *.cat files--which, I understand, are required to confirm digital signature. Each of them (ridisk.cat and risdxc.cat) has a signed and valid certificate! So what is going on? Will the card reader work? Is there something wrong with how Windows 7 is treating the Ricoh driver, which I downloaded from the Lenovo site? Why should I be getting this grief?













Solved!

Go to Solution.

Answer:Ricoh card reader driver-not digitally signed?

Hello,
 
Perhaps the driver is damaged?
 
Try deleting the Ricoh PCIe SDXC/MMC host controller from the Device Manager and then restarting the computer in order to let the Device Manager re-detect it and re-install the device drivers.  Does that solve the problem?
 
Regards,
 
Aryeh Goretsky
 

5 more replies
Relevance 93.07%

Hello,
I'm at my wits end. Anyone who can help would be my hero.

Acer 5253 laptop, Win7 Home Premium 64bit SP1, AMD C-50.

Trying to use a USB mouse. I have 3 logitech mice. None work because hidclass.sys and hidusb.sys are not digitally signed. If I f8 and disable driver signing enforcement, all 3 mice work, so I'm pretty certain that's the issue.

Tried "Update Driver" via device manager. Windows determined that I already had the best driver and wouldn't do anything.

Logitech does not furnish drivers for Win7. They rely on the native drivers.

Acer does not furnish mouse drivers. They refer you to the manufacturer of the mouse.

Tried copying the files in question from a 64bit machine that showed them to be digitally signed. Renamed the ones on my machine and pasted the ones from the "good" machine. Resolved nothing.

chkdsk /r found problems and repaired them. Didn't help.

sfc /scannow found problems that it could not resolve. Looked in CBS.log and found no references to either of the sys files in question. No resolution.

System Restore only had one restore point, and it was from 2 days ago. Problem was already noticed by then. I suspect that it's been this way since I purchased the laptop a couple of months ago anyway, but if there had been a restore point back at the very beginning, I'd have tried that.

I don't know much about digital signing of drivers. I've seen in a couple of threads that I might be able to sign the drivers myself, ... Read more

Answer:Windows mouse driver files not digitally signed

Mike

Obviously many more problems than just the mouse driver.

You can use earlier drivers (ie from vista, or even XP) if you install them in compatibility mode
[right click the installer>properties>compatibility>chose OS]

The other system problems need a repair install.

4 more replies
Relevance 93.07%

Windows Vista x64 decided to implement a 'security measure' by which all drivers must be 'digitally signed' to be allowed to install and run. I have a program which is compatible with Vista and x64 bit operating systems, however as its drivers are not digitally signed I cannot run it correctly - I recieve the message 'Windows requires a digitally signed driver' and access to the driver is blocked.

Is there a method of bypassing this?

Answer:'Windows requires a digitally signed driver' - How can I bypass this?

When you boot your system hit F8 and you can bypass it there. You will have to do this every boot. There are a couple applications out there that will do this for you but the names escape me right now.

4 more replies
Relevance 92.66%

Just purchased a Thinkpad E550 and having instaled all the Windows 7 updates, I upgraded to Windows 10. Everything 'seemed' to be working well and I really like the look of Windows 10.However, several users here have multiple (2) monitors connected to their laptops when at the office and one when at remote sites. So this is a must have.When I tried to connect either a monitor or projector to the VGA or HDMI port I get 'No Signal'. It works perfectly well with Windows 7.Checking in Device Manager I find an exclamation mark on the driver, so I tried to update it. It is the most up to date (31/08/2016 Ver: 10.18.15.4281) but in properties I get the message: 'Windows will not install driverIntel HD Graphics 5500Windows has stopped this device because it has reported problems (code 43)'  Ran every update on the laptop Chipset, BIOS etc.Uninstalled the driver, downloaded the latest from the Lenovo support site, but still it installs the Microsoft Graphics driver.Tried to install the driver from the Intel site, but get the message directing me to use the manufacturers driver.At a complete loss and with the laptop under warranty I called Lenovo Support, who then proceeded to reinstall the driver. Same problem - No VGA output No HDMI output!They then told me to roll back to Windows 7. THAT IS NOT A SOLUTION.I did and low and behold the external ports work as normal. Has anybody manged to get their Lenovo E550 (or ANY laptop) with Intel... Read more

Answer:No working Intel HD Graphics 5500 driver for Thinkpad E550 on Windows 10!!!

Hello KCL,
 
please install the newest driver from intel.
Befor installing, delete the old driver and uninstall the driver from lenovo. Then the Intel driver should be used.
 
 

8 more replies
Relevance 92.25%

This is more of a bug report rather than a question.


When installing the latest version of Message Analyzer 1.4 (Build 4.0.8110.0) on a clean installation of Windows 10 Pro (Build 14393.222), it shows an error saying 'A Digitally Signed Driver Is Required' Message Analyzer -- WFP Callout Driver.
I'm guessing maybe due to the new driver signing requirements in Windows 10 1607 Anniversary Update...
https://blogs.msdn.microsoft.com/windows_hardware_certification/2016/07/26/driver-signing-changes-in-windows-10-version-1607/

More replies
Relevance 92.25%

Hi.I am having a Z580 (Windows 7 65 bit home premium) laptop.Recently I am experincing many problems with my wireless adapter.After a few seconds of switching on, wireless symbol will show "Limited Access". I will try troubleshooting, but the system will hang and i have to force it to shutdown.So I have un-installed the wireless driver and re-installed it. But now the same "Limited Access" happens and when i troubelshoot, (Reseting wireless adapter) the adapter goes off and it is shown that "Adapter is experiencing driver or hardware related problems". When i looked into device manager it is shown that ""This device cannot start .Code10"". Also when i checked the details, it is showing that "'the driver is not digitally signed"".Please help me solve this issue asap.

Answer:Wireless Adapter is not working (Code 10) "Driver is not digitally signed"

Update : If i put laptop in sleep after wireless becomes "Limited access"  after 10-15 mins if i reopen it, wifi is connected normally and it works! but for a period less than 10 mins.. After that again "Limited access" is coming and nothing will load!!! it is becoming a serious issue plz help

1 more replies
Relevance 91.43%

When I downloaded/installed Everest Home Edition I got and error message shown in the attached image although Everest seems to work fine. How do I make Vista accept non-digitally signed drivers that I trust?This is on my HP 6715b in specs, Vista Business x64[regaining space - attachment deleted by admin]

Answer:Everest Home Edition download. Message = driver not digitally signed

To be on the safe side, reckon the download was ruined by some kind of malicious software. Perhaps on your system.Ask a friend to download it and see if he gets the same thing.EDIT:Just did download from the majorgeeks. Works on both XP and Vista. Scanned with Avast and no threat found.You have malware. Or a bad download.

8 more replies
Relevance 90.2%

Hi all,
I am wondering how do I digitally sign my driver so that it can be installed on a Win7 Ultimate SP1 in a VMWare virtual machine. I have used Visual Studio 2013 to sign my driver and cat files using a certificate I obtained from GlobalSign. Both of these
files passed the signtool check, but when trying to install in this virtual machine it generates an error code 52.
Thanks in advance for any help

More replies
Relevance 88.56%

Hi,
I have Dell E7470 and I'm considering a motherboard replacement. The board has i7 CPU with Dell Part # VNKRJ . I wanted to ask If the new board with i7 CPU 6050 and Intel Iris graphics 540 (Dell part # YDW8F) will fit on my laptop ?

In addition, If I purchased an i5 board (Dell part # 3GMP2) , will I be able to replace the CPU with the one that I currently have on the old motherboard and get an i7 board ? I'm asking because the i5 board is cheaper than the i7 board.

Thank you

Answer:Dell E7470 - is it possible to get the new Intel 6050 CPU with Intel Iris graphics ?

While the boards should interchange, bear in mind:
Whatever board you buy has a CPU soldered to it - the CPUs cannot be replaced separately from the mainboard;  they are not removeable.
If the system is in warranty, replacing the mainboard voids the warranty.

1 more replies
Relevance 87.33%

hello everybody, my name is Brian, I own a dell xps 13 (9350) purchased in 2017, but its the 2016 model with intel iris 540 graphics, its also the model with the QHD+ touch-screen, 3200x1800 resolution.
not sure if it matters what else the system has spec-wise, but ill include that also.

My question is in regards to the colors, and what this screen is producing picture/video quality-wise when I'm viewing colorful photos, or watching videos with colors on youtube;

I've watched quite a handful of videos on youtube about the dell xps 13, and a lot of them suggest that this laptop comes "a touch off" in terms of color gamma and/or color accuracy - whatever that means, but they say the xps 13 out of the box, with no settings adjusted other than what dell and intel have done, that the color and screen needs to be calibrated. 

how do I know what to do and how to check if I need it? I mean, everything seems to be good looking, but if its off and I just don't know it, I would like to know how to modify these "said" settings, as I want the most out of my xps 13!

I'm also experimenting with different power-plan settings, trying to configure this machine for the best possible battery-life, and also longevity in overall-life span. meaning I want to preserve this machine in ways possible, without reducing any of the added benefits of having such a high-performing laptop.

I bought this xps 13 from a friend, we actually traded. I gave him my ipad... Read more

More replies
Relevance 86.92%

Hi all,
I'm really having a few issues with my Precision 5510's graphics running Windows 10. Essentially, I have two problems: the screen often goes black momentarily (for about two seconds) and then comes back again, which is really annoying. In addition, the screen's brightness sometimes goes dark, despite the backlight being on its maximum setting. I believe that this is a bug with the GPU drivers, but I am running the latest version, and there have been no updates since then. Has anyone else experienced this, and what would be the best way to fix it.
Many thanks for your help!

More replies
Relevance 84.05%

Edit: I fixed it! (I was causing the problem myself but uninstalling the chip in the first place when i should have been disabling it instead)


Ok... I looked for about an hour and decided i would have to make a new thread for my specific problem... so sorry if im making my first post in an odd place

I recently installed a NVIDIA GeForce 5500 FX PCI 256MB DDR video card
followed directions as best i could, and disabled the Intel integrated graphics... but my PC insists on REinstalling the intel integrated graphics controller upon restart... It left me alone for awhile and i could run Counter Strike : Condition Zero moderately well (low frames after playing for over an hour) but after allowing my computer to update itself (while using IE to dowload firefox for a reinstall, IE randomly decided my home page was going to be the microsoft site for the day) and since then no matter what i do the computer insists on trying to reinstall the intel integrated graphics thing...

so my question is, how do I make this stop? how do i keep the computer from giving me the dreaded "found new hardware" bubble when im using a FAR superior (REAL) video card already?

is there something i do in the BIOS (i hope not, i dont like messing around in there) or on the motherboard itself?

i have some basic info about my comp in my signature but im going to use "PolSystemInfo" to find all my PC specs and just copy paste them below, I just hope its enough info to help so... Read more

Answer:NVIDIA GeForce 5500 FX-vs-Intel Integrated Graphics... please make intel go away!

Hmm that didn't happen to me when I put mines in. Did you install the NVIDIA drivers? Try disabling the onboard in the device manager. That?s what I did. There doesn?t seem to be an option to turn it off in the bios (my bios) maybe there is for you however. It isn?t too complicated. Just simply look for onboard graphics or integrated graphics controller or w/e and select disable, but first try disabling it in the device manager. It should be listed under display adapters -> properties -> disable this device.

You should upgrade to DX9.0c...
 

4 more replies
Relevance 83.64%

Hello everyone.

Recently I kept getting this popup saying *A digitally signed driver is required*

How do I find out what program is using this unsigned driver to remove this popup?

Answer:How to solve "digitally signed driver is required"

Any warnings in Device Manager ?

0 more replies
Relevance 83.64%

Hello everyone.

Recently I kept getting this popup saying *A digitally signed driver is required*

How do I find out what program is using this unsigned driver to remove this popup?

Answer:How to solve "digitally signed driver is required"

Any warnings in Device Manager ?

more replies
Relevance 83.64%

I am experiencing a problem with the most recent updates for my XPS 13. The Intel graphics driver “Intel-HD-620-and-Iris-Graphics-640_4MRV7_WIN_22.20.16.4771_A08.EXE” prevents the auto installation of the available updates. Downloading the file and installing it manually led to a blue screen and “Windows didn’t start properly…” message. Trying to install it in Safe mode was an even worse idea – major blue screen, had to restore windows from the previous restore point to get it running again. Dell update keeps prompting me to install an update including this driver, but there is clearly a major incompatibility somewhere. The files for “Chipset |Intel Management Engine Components Installer” and “Chipset |Intel Chipset Device Software Driver” won’t install either, but at least they don’t cause blue screens. The recent BIOS update and other driver updates have installed (manually) fine. Any advice appreciated.

More replies
Relevance 82.82%

Issues again with laptop monitor.  Passes all hardware tests.  Did a complete reinstall of Windows 10 using MS Media creator.  Laptop monitor worked with 2006 MS Generic Graphics driver but when updated, laptop monitor went blank but external monitor started working.  Believe this is a driver problem but each one I try has the same result.  
Had same issue in January.  Was under warranty at the time and ultimate result was to reinstall Windows from Microsoft, motherboard was also replaced although the tech didn't believe it had anything to do with the problem.  Laptop monitor worked fine until a couple of weeks ago when new Windows updates were installed.  I have seen several other posts that are describing the exact same issue.  
Currently, I have latest drivers for the graphics - 20.19.15.4531, Windows 10.0.15063.  At this time, my nice expensive laptop is just a desktop.  Any suggestions on what to try next?
Randy

More replies
Relevance 82.82%

Hello everybody,
I have a Dell XPS 13 9350 with an Intel HD Iros 540 graphics card.
Every worked nicely until an automatic update turned my screen black. After reinstalling Windows 10 from scratch, I discovered that with the generic graphics driver provided by Windows the screen works, but any specific driver for my card turns the screen black. I tried, with no success, in this order:

All the versions of the graphics driver found on the Dell website

20.19.15.4531, A07, 29 Dec 2016
20.19.15.4483, A06 07, Sep 2016
20.19.15.4454, A05 29, Jun 2016
20.19.15.4390, A04 14, Apr 2016
The latest driver found in the Intel website (15.45.16.4627)

None of these works. As soon as any of these drivers are installed, the screen turns black. Upon reboot, the screen stays black in the login screen.
The only fix I found so far is to remove the driver completely, and use the default graphics driver of Windows. I also had to disable automatic driver updates, otherwise the screen would turn black again upon reinstallation of the driver.
What are my options? Is there any diagnostic information I can provide that can help me troubleshoot the problem? I am a Linux user and I know very little about Windows.
Thank you in advance for any help you can provide.

Answer:Black Screen on XPS 13 9350 with Intel HD Iris 540 Graphics Card

Hi ilpincy,
Thank you for writing to Dell Community Forum.
Please install the BIOS, Chipset and then the graphics card drivers (in this sequence) from the Dell Support site.
Please click my DELL-username and send me a Private Message with the Dell Service Tag number and your email address.
Note: please don't mention the service tag or email id on the public forum as it contains your personal information

1 more replies
Relevance 80.36%

Have problem with intel 5500 HD graphics driver on dell 7548. Getting  error code 43 since updating to windows 10. After longing onto windows it return to sign in screen looking to missing driver. No one seems to have an answer.  I tried installing every driver possible from intel and Dell

Answer:intel HD 5500 graphics

Uninstall all the video drivers (if it's Intel only, there will just be one set;  if it's a hybrid video setup, there will also be an nVidia or AMD driver).
If this is Windows 10, reboot the system and make sure you're online.  Windows should pick up and install the video drivers for your system, at least the Intel one.  If not, the correct driver for Windows 10-64 bit is this one:
www.dell.com/.../DriversDetails

1 more replies
Relevance 79.95%

"Intel Iris Graphics 640 Driver for Windows 10 (64-bit) - ThinkPad X1 Yoga (Type 20JD, 20JE, 20JF, 20JG)"  http://pcsupport.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x... Is this some kind of sick joke to remind us that at last moment Lenovo decided to skip Iris?!??     





If I helped you, please give me some kudos! ^^

More replies
Relevance 79.95%

I'm looking at my DirectX Diagnostic tool and it says for a few things
"The file ati2dvag.dll is not digitally signed" under Video, and "The file RtkHDAud.sys is not digitally signed" under sound 1 and 2. is this a serious problem? it might help solve why I've had a few crashes when playing games maybe? If anyone can help I will be very grateful, especially by telling me how to get these "signed"

My stats are
XP Home Edition (5.1 Build 2600)
1390 RAM 3.33 GHz
Radeon Xpress 200 series
 

Answer:Not Digitally signed?

I know very little about this kind of stuff but I think it just means it's a driver that hasn't been registered with Microsoft, or something along those lines. I don't believe it affects the operation of the thing.
 

1 more replies
Relevance 79.95%
Relevance 79.54%

Intel HD graphics card 5500 equivalent to?

More replies
Relevance 78.72%

I tried to run sigverif.exe on XP professional edition and found there are over 2000+ system files not digitally signed. How do I get those systems files (i.e. *.dll, *.sys) digitally signed by Microsoft as signer?Angus

Answer:how to get Microsoft digitally signed?

WOW !!! My computer works, but now I should worry about unsigned files.Now is the time to throw computer out the windowhttp://www.computerhope.com/cgi-bin...What is sigverif.exe?

3 more replies
Relevance 78.72%

Hi,

I'm trying to install XP Pro SP1 from a combined update file. After the update the log file says "not digitally signed and will not be replaced" on lots of the files. Is there a way to fix this problem?

Thanks,

Docfxit
 

More replies
Relevance 78.72%

Most of you know by now I hope that Vista requires it's drivers to be digitally signed by Microsoft. Is there a way to bypass this when the final product is released or do you think MS will back down due to public rage?

More replies
Relevance 78.72%

The file aticfx64,aticfx64,aticfx64,amdxc64,aticfx32,aticfx32,aticfx32,amdxc32,atiumd64,atidxx64,atidxx64,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a,atitmm64 is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware
Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer I am using windows 10 with directX12 and I had to update my dedicated gpu cause I couldn't see the switchable graphics button ON ... and most of my usual games
witch I had played before now they were moving in slow motion very badly after I solved this problem with the official amdcatalyst software and drivers updated I get this annoying message on directx12 that says I need to get a WHQL logo driver ... any sollutions???
THANK YOU

More replies
Relevance 78.72%

Dear All,
A vendor website sporadically release's MSI's which are digitally signed (plugins to run the content). These are required for the website to function.
Users are more in number so we can't manually install the MSI and time is a constraint.
Packaging / Repackaging is not a quick solution
App-locker doesn't bypass UAC, AUTO IT didn't help, Manifest and shim are only for Exe's.
We are looking for a solution where in since these are digitally signed MSI's Users should be able to install them automatically without being asked for the credentials.
Regards,
C

More replies
Relevance 78.72%

Hi Guys, I did a search of my OS, and found some Drivers not digitally signed.Is that a problem,as my PC is functioning OK.Thanks for any advice.

Answer:Digitally Signed Drivers.

Hi D,
Your ok for the most part. A driver that lacks a valid digital signature, or that was altered after it was signed, can't be installed on x64-based versions of Windows. As a result, you will see this message ( Windows cannot install this driver ) if you are running an x64-based version of Windows.

The only other time (I think) may be if you updat a driver. again you may get that can't install it error. You can visit the device manufacturer's support website to obtain a digitally signed driver for your device.

5 more replies
Relevance 78.72%

How would I go about turning off the Warning message that comes up when you are installing device drivers that are not signed by Microsoft.

I have already found the reg value:

HKEY_CURRENT_USER\Software\Policies\Microsoft\Wind ows NT\Driver Signing

BehaviorOnFailedVerify = 0

Is there any other ways. I also have been told that the above method doesn't stop all of the pop-ups...does anyone know why?

-Aaron

Answer:Digitally Signed Drivers

right click on "my computer", click properties, select the hardware page, there is a button with "driver signing"

9 more replies
Relevance 78.72%

I have had to reinstall Windows 7 64-bit edition, and when I go to install PCWizard or Everest Home Edition, I keep getting an error about drivers not being digitally signed, and Windows will not install them. Before I reinstalled Windows 7, I had both of these programs running just fine. Is there anyway I can change the fact that Windows 7 will let me install those drivers?

Answer:Digitally Signed Drivers?

The only way for 64 bit versions of Vista or Win7 to work without digitally signed drivers is to start them up using F8 to get teh Advanced Startup and disable the Digitally Signed Driver service.

If you had them working before did you make sure all your drivers now are current?

3 more replies
Relevance 78.72%

Hi,

After having issues with my W7-64 bit HP Envy 15 laptop, I decided to reinstall the OS. Everything went as planned until I installed the win64_153619 graphics driver from the Intel website.

Although the driver installed OK, the control panel interface is now different (now called Intel HD Graphics Control Panel)




There's no longer brightness control. The power options in W7 only has 10 steps for brightness of which are either too bright or too dark. My question is, how can I have more control over brightness? Third party software?

Answer:Brightness Issues - Intel HD Graphics 5500

I don't have this setup, but will on a new Toshiba Laptop with the Intel 5500 graphics that I just ordered. I'm posting to track this thread to see what transpires.

Sorry for hijacking it.

6 more replies
Relevance 78.72%

Hi all, Bought a new Aspire F5-571 two months ago with Windows 10 preinstalled. Recently, I've started getting the error message in the subject line of this post. Doing some research reveals that it could be a problem with the display drivers. I've checked Acer's website for my model and the only graphics drivers available are Intel's VGA drivers. Intel's web site reveals that the drivers for Intel HD Graphics 5500 are OEM drivers and are shipped by the manufacturer - obviously in this case Acer. Anyone any idea if there are updated drivers anywhere on Acer's website ? Regards, gneil15













Solved!

Go to Solution.

Answer:Aspire F5-571 - Intel 5500 HD Graphics display dri...

http://www.howtogeek.com/223864/how-to-uninstall-and-block-updates-and-drivers-on-windows-10/ remember also to check C:\Intel folder and delete VGA drivers inside if listed.

6 more replies
Relevance 78.72%

Hello,

I have been searching on the internet about this issue I'm currently battling. I have have found similar issues but not exactly what I am going through.

I am hoping you experts can help me. Here it goes...

I have a Lenovo G50-80 laptop, which is less than a month old. It came with Windows 8.1 and had a free upgrade to Windows 10. It ran fantastically except I still preferred Windows 7 - I did a clean install.

The problem is my graphics card. When I had Windows 10, in the dxdiag page I had the following tabs:System
Display
Render
Sound
Input

Basically on the Display tab, the Intel HD Graphics 5500 is displayed and on the Render tab, I had the AMD Radeon HD 8500M.

Now that I downgraded to Windows 7 (installed all updates including SP1), the Render tab is no longer there.

I have checked the device manager and saw both cards listed and active with no errors.

I did the following:Updated Drivers for both Intel and AMD graphics
Uninstalled all graphic drivers and reinstalled Intel first then AMD
Changed the settings on the AMD graphics controller to Maximum Performance on the game I am playing

I do not know what I am missing here.

I am really looking forward to a solution.

Thank you in advance, gentlemen!

More replies
Relevance 78.72%

Hi all, Bought a new Aspire F5-571 two months ago with Windows 10 preinstalled. Recently, I've started getting the error message in the subject line of this post. Doing some research reveals that it could be a problem with the display drivers. I've checked Acer's website for my model and the only graphics drivers available are Intel's VGA drivers. Intel's web site reveals that the drivers for Intel HD Graphics 5500 are OEM drivers and are shipped by the manufacturer - obviously in this case Acer. Anyone any idea if there are updated drivers anywhere on Acer's website ? Regards, gneil15










Solved!
Go to Solution.

Answer:Aspire F5-571 - Intel 5500 HD Graphics display dri...

http://www.howtogeek.com/223864/how-to-uninstall-and-block-updates-and-drivers-on-windows-10/ remember also to check C:\Intel folder and delete VGA drivers inside if listed.

6 more replies
Relevance 78.72%

Can anyone verify that the newer X1 carbons w/ the Intel HD graphics 5500 are displayport 1.2 MST? I had planned on getting another x1 (current has intel HD 4000) for the 16gb memory and 512 SSD PCI.  I need to be able to drive two external monitors in extended mode.  I do a lot of CAD and construction takeoff work. My current x1 will only drive dual, external monitors in duplicate mode. I have searched over the net, the intel site, and here concerning the DP 1.2 MST with the Intel HD 5500.  I was able to find out that the intel HD 4000 is only displayport 1.1 which is why I can't get extended desktop with two external monitors via the mini DP port. Thanx in advance.

Answer:x1 carbon w/ intel HD graphics 5500...displayport 1.2 MST

anybody from Lenovo able to answer? Looking to order an x1 with the Intel HD Graphics 5500 Displayport 1.2 MST ??

9 more replies
Relevance 78.72%

hello to everyone i using now notebook g5 250 i3 2.0g/hz with intel hd 5500 graphics(128mb dedicatet) so how i can incrase shared memory(for now is using 1600Mb from 8gb ram i will upgrade ram but how shared memory?) or how can upgrade graphics for my laptop? 

Answer:how to increase or upgrade graphics intel hd 5500

Hi, Firstly you can't upgrade intel hd 5500 without spending an arm and a leg (ie buy new machine). aand secondary: system will assign available system RAM to video up to max GRAM supported. You can't do anything about this and adding more RAM  to 8GB will help. Regards.

1 more replies
Relevance 78.72%

Hi Guys, i bought myself an Eizo EV3237-BK 4K Monitor for my T450s. Since i got it i was not able to run it at 4k 60hz. it is stuck at 16 bit and 30 HZ. According to the Technical Specs of the System it promised 4K 60 HZ. Im on the latest bios and Drivers with no energy saving plan activated. Anyone has the same issues? i would like to hear from an Lenovo Official about this issue! Best, Marc

Answer:T450s Intel 5500 Graphics no 4k 60HZ

Are you on BIOS 1.16? Have you activated IGD Core Display Clock as 675MHz in BIOS?

4 more replies
Relevance 78.72%

Hey everyone, its my first time posting so please be gentle lol.hope you can help.  I have a Lenovo Z51-70 with intel graphics 5500.  I would like to upgrade or add another graphics card to it so that I can start playing better games on my laptop and to also increase the fps.  Can someone please tell me if this is possible and suggest a suitable graphics card? I will look to upgrade the ram at a later date to the max 16gb.. Processor - I7-5500U @ 2.4ghzRAM - 8GBOS - Windows 10 Many thanks for your help and suggestions

More replies
Relevance 77.9%

I cant connect to the net with a hardwired conection. I have the correct drivers for my wireless adaptor however it blocks the install because its not signed. I could have sworn that users could turn that off. Any ideas? Bet im missing something stupid.

Answer:lynksys ae1000 not digitally signed?

I switched to my laptop. Problem solved lol

1 more replies
Relevance 77.9%

Hello,
first to apologize if there is such thread and it's in wrong section, I was unable to find it. My problem is: I have V560  model name: 20069, MO Number: WB xxxxxxxx, and I installed w7 x64 ultimate. When I'm installing drivers from dvd that I received in box, I got message: driver is not digitally signed.... It's happening when installing bluetooth, wireless, camera. (I'm installing proper drivers).
I also tried to dowload from web site, but also got this message.
Did any one had this kind of problem and how did you solved??
 
Thanks for help.
 
Mironso.
 
Moderator Note; s/n edited for member's own protection

Answer:V560 drivers for w7 x64 not digitally signed

Hi mironso,
 
Thanks for posting and welcome to the Lenovo Community,
 
I?d like to help you with your issue and I need to ask you the DVD which came with the machine does it have any stickers indicating for which windows version is it windows 7 32bit or 64bit ?
 
And please check the below links for the drivers from the website and let us know when you install them what happen and if you can see the same error message:
 
For the Bluetooth:
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS012335
 
For the Wireless:
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS011532
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS007871
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS012239
 
 
For the Camera:
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS008927
 
Hope the information helps. Let us know.
 
Regards
 

Soha






Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

2 more replies
Relevance 77.9%

Just as the title says, i got this game Tomb Raider - Underworld that wont work properly. I installed the game and the game starts but once it starts it crashes and i get a error. I reported the problem to the games manufacture and they said this =

We apologize for having difficulty with our game. Your system does meet the minimum requirements to play this game.
Unfortunately the problem is that your drivers are not digitally signed. In order for us to forward your information
we will need you to update your drivers. After you have updated the drivers please send up an updated DXDiag report
and we will forward your information to our product development team.

My PC is costumed built so i really can't contact a PC manufacture.
Can you help me?
 

Answer:How to make your drivers digitally signed?

13 more replies
Relevance 77.9%

I'am having problems with viatech usb 2.0 drivers on win xp home edition. They're not digitally signed for one and these are the drivers they sent me with my asus a7v333 motherboard which is designed for amd xp processors and windows xp!! I cant find anything on asus's site or viatechs site about drivers for xp and my computer is hanging up alot and everytime I try to shut down I get the debuglog.dll end program message. also Ive been having problems playing games online which Im not sure if its the usb drivers causing it but I thought it might be since I have dsl and the modem plugs into the usb port. Any help would be greatly appreciated.
 

Answer:Viatech Usb 2.0 Drivers Not Digitally Signed???

Hi there!

If XP says they're not signed...just install them anyway! XP just implemented USB 2.0 in SP-1.

When you get that message...just click "Continue Anyway" and load them up!

They should work fine!
 

1 more replies
Relevance 77.9%

I am trying to use my recovery disks after installing a new hard drive. I keep getting these messages saying my drivers aren't digitally signed. Not sure how to fix this! Maybe corrupted recovery disks?

Answer:Digitally Signed Drivers with Recovery

hi again not sure if this will help you http://www.jablotron.com/upload/down...dows7Vista.pdf

9 more replies
Relevance 77.9%

OK GUYS HERE WE GO

I HAVE AN IBM R31 LAPTOP THINKPAD, EVERYTHING WAS WORKING
FINE YESTERDAY UNTIL I UPDATEDTHE DRIVERS FROM IBM.I DID NOT BACK
UP MY SYSTEM TO RETRIEVE MY OLD DRIVERS IN CASE A MISTAKE HAPPENED
TO ME, WHICH I REALLY REGRET DOING NOW. MY COMPUTER HAS A MATSHITA UJDA720 DVD/CDRW.WHEN CHECKING THE PROPERITES IN MY COMPUTER ON THE DRIVER IT COMES UP THAT THE FOLLOWING DRIVERS OR PARTS THEREOF ARE NOT WINDOWS DIGITALLY SIGNED #1- C:\WINDOWS\system32\drivers\cdrbsvsd.sys #2- C:WINDOWS\System32\DRIVERS\PxHelp20.sys. I WAS WONDERING IF THERE IS A WAY I CAN GO BACK TO MY OLD DRIVERS I HAD BEFORE WHICH WERE WORKING FINE OR IF THERE IS SOMEWHERE I CAN FINE THESE TWO FILES WHICH ARE DIGITALLY SIGNED BY WINDOWS AND HOW TO INSTALL SUCH.

NOT SURE IF I'M IN RIGHT FORUM OR NOT ANY HELP WOULD BE GREATLLY
APPRECIATED.I AM RUNNING WINDOWS XP HOME

THANKS ALOT
 

Answer:Windows Drivers Digitally Signed

The fact that the drivers are not certified by Microsoft merely means that the vendor did not submit them for testing and pay the bill to do so.

Many perfectly good drivers are not certified -- so do not worry about that unless you actually have problems with the hardware.

Having said that there are two ways you can restore the old drivers in XP. One is to go to the Device in question in the Device Manager, open its properties dialog (double click it) and select "rollback driver" on the driver tab. Windows XP backs these up automatically when you make a change.

The second is to use System Restore to return to a prior date.
 

1 more replies
Relevance 77.9%

Hello All,

We have an Excel spread sheet that contains macros, that is shared through out our company. We have issued our own certificate to go with this spread sheet.

We have a Windows 2000 Active Directory running in Native mode. We are trying to push this certificate to become a "trusted source" w/in MS office. Does anyone have any experience with this?

Thanks,

Adam
 

Answer:Digitally Signed Certficate Troubles.

Nobody has any experience w/ Digital Signatures?

(i spoke to MS and aparently they don't either. they said no one has tried this before.)
 

2 more replies
Relevance 77.9%

Hi all: I have a problem with my laptop (model VN7-571G). After a recent Windows 10 update, now I am not able to connect the laptop to my flat  LG TV via HDMI. I think it has to be related to Intel Graphics 5500 (current driver 10.18.15.4248). When I connect the laptop to my flat TV, laptop screen goes black (as it happened before), but TV message says "Without Conection". If I try to use Intel Driver Update Utility 2.6.1.4, it says I have to go to Acer website to get the drivers. I have already uninstalled all Intel drivers (VGA, chipset, etc.), and installed the ones in Acer website but the problem still exists. Any idea how to solve it?. Thanks and regards from Spain.Ignacio

More replies
Relevance 77.9%

Hello, am the proud new owner of a T550 type 20CK and ProDock. The ThinkPad itself has the 3K (2880 by 1620) LCD panel. I want to use this machine at my desk with an external 4K (3840x2160) monitor so that windows can move from screen to screen without scaling. But the Screen Resolution section of Windows 8.1 control panel only shows a max resolution for the external screen of 2560x1440. The hardware is supposed to be able to do this. I think I need a better driver. Explanation: Graphics are from the Intel HD Graphics 5500 onboard chip. The spec sheet for my machine, here, http://psref.lenovo.com/Product/164?MT=20CK  says  "Intel HD Graphics 5500 in processor only, or Intel HD Graphics 5500 in processor and NVIDIA GeForce 940M, 1GB memory (discrete models are only available in Western Europe); supports external analog monitor via VGA and digital monitor via Mini DisplayPort; supports three independent displays; Max resolution: [email protected] (DP via mDP cable); [email protected] (VGA)" Yet this resolution is not selectable. The Intel HD graphics 5500 driver updated by Lenovo System Update is dated 11/18/2014, pretty old. Intel's site has a driver dated 3/6/2015. But the system will not let me install this driver saying my system needs a custom driver I must obtain from Lenovo. Please help! Bryan











Solved!
Go to Solution.

Answer:T550 with Intel 5500 graphics, 4K external monitor

How are you connecting the monitor? DisplayPort? Have you tried plugging it into the laptop directly? I have the same question - I just received my T550 today, got the Pro dock, and I am waiting on a 3440x1440 monitor. Hoping that everything works...

9 more replies
Relevance 77.9%

So I had this problem that would make my games look very crap and heavy lagging in some medium-size titles, then some people told me it`s the graphics card fault and so i checked it. turns out it`s ~1 year outdated, tried to install an update from the Intel page, that also said it was very outdated. The Notebook doesn`t let me update it because, i quote, "your manufacturer personalizez the drivers and this specific driver is now allowed. you can install a generic driver but you risk devoiding your warranty and lose some critical system functions". Further, i went to the Lenovo Support page, made a complete scan and guess what? Nothing wrong. So i tried to manually download a driver update and only found Nvidia VGA Driver and Intel VGA Driver, but none of them were accepted, for the same reason as above.What do I do now? Do I install that 'generic driver' or contact a professional?

More replies
Relevance 77.9%

Hello,

Microsoft has installed an icon for get Windows 10.
In validating the application I tested the equipment and it appears that the graphics card is not compatible with windows 10.
The graphics card is a intel hd graphics 5500. This problem is it unacceptable for the transition to window 10 ?

I buy this Satellite S50-B PSPQEE-00500LFR one month ago.

Answer:Satellite S50-B - get Windows 10 - Intel HD graphics 5500 uncompatible

Hi

As far as I know Windows 10 is still in testing phase so Toshiba didn’t start official Windows 10 support. Windows 10 drivers are not offered for download.
The same situation was noticeable few years ago before Win8 was offered on the market.

4 more replies
Relevance 77.08%
Answer:Digitally signed printer drivers with windows XP

I have a home network. All my machines were running Windows ME. I have an HP Deskjet895Cxi printer attached to one of the machines. I could print to the printer from any machine. Now I have a new machine running Windows XP and the printer is attached to this machine. I can print OK from the XP machine but none of the other ME machines can. I see in the printer properties that I can add a printer driver for ME but every time I try this (using the latest ME driver from HP)I get the message that the driver is not digitally signed and the driver is not loaded. How do I get a digitally signed driver for my printer?Alan

4 more replies
Relevance 77.08%

I have a macro in a .doc file developed in word 2002.
It runs OK with security settings "Run All" or "Ask before run", but if I sign the file with a certificate that I made myself (with SELFCERT.EXE), change the setting to "only run signed macros" the doc file will open without warnings, but the macro wont run.
What is missing?
With regards
/David
 

More replies
Relevance 77.08%

I've been having problems with BSODs (0x09F - happens before sleep mode, or during and 0x0E6 - which happens while I use the computer; it seems to happen when I'm downloading and/or installing anything) so I ran File Signature Verification, and rtnicprop64.dll came up as the only file not digitally signed, and 2 more files weren't scanned. Is there anything I can do?

Answer:Diver Verification: rtnicprop64.dll not digitally signed

hi follow this : BSOD posting instrucs: http://www.sevenforums.com/crashes-d...tructions.html
so someone can hopefully help you, even perhaps me.

4 more replies
Relevance 77.08%

Why is everyone saying Vista 64-bit won't install unsigned drivers? I installed the latest beta driver from nvidia and Vista warned that it was unsigned but gave me an option to install anyway.

Am I missing something/misinterpretting this or was this only the case in the Beta/RC verisons of Vista and everyone keeps bringing it up (kind of like requiring UAC for changing backgrounds; people still say Vista does it)?
 

Answer:Digitally signed drivers required under Vista 64-bit?

Short answer: The effects of FUD.

Long answer: The truth is, it was never stated on any official documents that Vista wouldn't accept unsigned drivers. The real mechanism is how Vista handles such drivers, in that the permission level changes, but that's such a 'behind the scenes' object that some ppl though it cooler to just say, "NOEZ, the sky is falling!".
 

6 more replies
Relevance 77.08%

Hi all, hoping this is the right subforum

I built a HTPC a few years ago and it had suited my needs fine. Relevant parts used are:
i3-3225 CPU,Scythe Big Shuriken 2 RevB,Asus P8-H77 Pro,2 x 4GB G.Skill Ares DDR3 1600 RAM,Samsung 830 Series 64Gb SSD (OS HDD),WD Cavier Green 2TB (Media HDD),

I tried to upgrade to Windows 10 but kept receiving errors, such as the partition was not GPT (0xc000021a). The one error that happens every time I tried to upgrade or install Windows 10 was winload.exe was not digitally signed. I wiped the drive, reformatted it as NTFS, converted to GPT and installed W10 from blank and still had the same winload.exe error. Right now I have put W7 Ultimate 64bit back on and am installing all the windows updates.

My question is, does anyone know why I keep get a winload.exe not digitally signed error? I have downloaded the W10 upgrade files numerous times, redownloaded the media creation tool, set clean boot, even tried downloading the upgrade and creating a usb drive with it from a different PC but same error.

Is there perhaps some upgrades that I should make my HTPC?

Answer:W7 Upgrade error - winload.exe is not digitally signed

Try turning secure boot off in bios.

5 more replies
Relevance 77.08%

Trying to create a silent install package for the latest 32 bit video drivers (83d527ww.exe) and cannot because the drivers aren't digitally signed so you have to manually install them.  Is there a way to get the older driver Version 8.15.10.2321 which does not have this issue?













Solved!

Go to Solution.

Answer:X220 Video Drivers not digitally signed

I had to uninstall and delete the older ones. Then I could install it

6 more replies
Relevance 77.08%

Um... So how do I remove/disable this stupid "feature" that only allows digitally signed drivers to be installed?
Most the drivers for my hardware is third party with no "proper" signed drivers.
 

Answer:Vista x64 forces digitally signed drivers?

Whenever i run across a non-digital signed driver i just get prompted. Its done that since XP SP2 i believe
 

22 more replies
Relevance 77.08%

They say too much knowledge can be a dangerous thing. I'm probably living proof of that.. someone told me how to run a Microsoft diagnostic that shows which system files do not contain digital signatures. According to the scan, 35 of my files are suspect. Should I be concerned about this? I religiously scan for viruses, spyware and rootkits using three different apps for each. Everything is supposed to be okay. Here is the list of unsigned system files:

Microsoft Signature Verification

Log file generated on 8/18/2007 at 4:27 PM
OS Platform: Windows XP Service Pack 2
Scan Results: Unsigned: 35

File Modified Version
--------------- --------- -----------
dxmasf.dll 8/22/2006 6.4.9.1133
mfc40u.dll 11/1/2006 4.1.0.6141
mxdwdrv.dll 3/22/2007 0.3.6000.0
mxdwdui.dll 3/22/2007 0.3.6000.16438
mxdwdui.gpd 8/31/2006 None
mxdwdui.ini 4/21/2006 None
nv4_disp.dll 4/19/2007 6.14.10.9424
nv4_mini.sys 4/19/2007 6.14.10.9424
nvapi.dll 4/19/2007 6.14.10.9424
nvcpl.hlp 4/19/2007 None
nvcod.dll 4/19/2007 1.0.0.35
nvcodins.dll 4/19/2007 1.0.0.35
nvcpl.dll 4/19/2007 6.14.10.9... Read more

Answer:[SOLVED] System Files Not Digitally Signed

Hi TomGab and welcome to TSf !

You don't have to worry about system files that are not digitally signed, it only means microsoft hasn't run extensive tests on them. The file owner (nvidia for most of your nvxxx.dll files for instance) will have tested them to make sure they would work fine with XP so you shouldn't have any problem.

4 more replies
Relevance 77.08%

Hello everyone,

I am trying to install windows and I have a MSI 890FXA-GD70 [product page] that is setup with a functioning RAID 0 configuration. My issue is when I get to the step where you select your hard drive, it doesn't show up.

So I click "Load Drivers" and select the x64 raid driver I got from MSI. It shows up, then I click next and then the error message comes up: "To continue installation, use the Load Driver option to install 32-bit and signed 64-bit drivers....etc"

I restarted and spammed f8 to get into advance startup options. I selected "Disable digital driver signing"

However that did not fix the problem.

Does anyone have any tips or a solution?

Answer:Digitally Signed Raid Drivers bypass [MSI, x64]

I have rt seven lite, I was going to load a custom registry file but my laptop has 7 home so no gpedit.msc

1 more replies
Relevance 77.08%

Bought a Clicksmart 310 Logitech cam for my new xp Toshiba, Satellite model. When I try to install, pop-up says the cam is not digitally signed and it may harm my hardware either now or in the future. This is the 2nd cam I bought and got the same message on the first one. Please help me. [email protected]
 

Answer:Webcam not digitally signed. The Box says it is xp compatible, but a warning pop-up.

This means that Microsoft has not certified the drivers themselves. If logitech is telling you it works in XP that means they have tested it. Make sure you are installing the latest drivers for the camera.
 

1 more replies
Relevance 77.08%

From what I know if these progams are running and they aren't digitally signed then they are most likely a form of a virus. I can manually find the official conhost.exe from windows/system32 and run it, that creates a separate instance of it running, making two, the official and the supposed virus. Neither of the supposed virus executables do not open any properties when I right click and select properties from the task manager, which is another red flag. I ran a fully updated malwarebytes scan and an avast scan outside of windows and had no returns of an infection. I could not find the location of the virus executables and I am looking for some help. Thanks.
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64 
Internet Explorer: 11.0.9600.16428  BrowserJavaVersion: 10.45.2
Run by OJoe at 14:19:41 on 2014-01-10
Microsoft Windows 7 Professional   6.1.7601.1.1252.1.1033.18.16333.12327 [GMT -5:00]
.
AV: avast! Antivirus *Enabled/Updated* {2B2D1395-420B-D5C9-657E-930FE358FC3C}
SP: avast! Antivirus *Enabled/Updated* {904CF271-6431-DA47-5FCE-A87D98DFB681}
SP: Windows Defender *Enabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.
============== Running Processes ===============
.
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\nvvsvc.exe
C:\Program Files (x86)\NVIDIA Corporation\3D Vision\nvSCPAPISvr.exe
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System... Read more

Answer:conhost.exe and csrss.exe not digitally signed virus

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/520358 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

9 more replies
Relevance 77.08%

I cannot use the CD drive on my Laptop, the device manager shows the a yellow triangle with an exclamation mark in it. I have updated the driver but it still wont load and I get the following message from the device manager: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39).

Any suggestions as to how to fix the problem?

Answer:CD drive of Satellite Pro A200 is not digitally signed?

Did you tried to remove the drive in the device manager?? That helps sometimes, because windows reinstalls in the most cases the previously removed (deleted) hardware.

Since when does the problem occur that your drive cannot be recognized?

Greeets

3 more replies
Relevance 77.08%

Hi All,I'm hoping this forum can be more helpful than the support line... The pre-installed wifi driver on my x200s was giving me problems from the time it arrived.  After a day of wifi usage, Windows would slow to a crawl.  After some digging, I verified that the wifi driver was causing DPC latency issues. I upgraded the wifi driver to the Lenovo v13 module and all ability to use the wifi card stopped.  I tried using the ThinkVantage tools to upgrade, I tried complete uninstall, re-installs using the downloaded driver from the Lenovo site.  Nothing worked.  I can see the device in device manager without error, however, fn+f5 doesn't show any wireless cards but the network center CAN see the wireless device and shows full green bars. I could not downgrade my driver since I couldn't find it on the Lenovo site. I did install the Intel generic driver for the 5300 and that was able to have me connected, but once again, I was left with one day of usage then a reboot.  Failing to reboot eventually leads to a BSOD. I've called Lenovo support and the fellow there says, "The only reason their driver wouldn't work is if the hardware was broken."  Which I find a little hard to stomach since it does 'work' using a different driver.  He's asked me to reinstall my whole OS which seems unreasonable.  He then asked me to ship my laptop to them to replace the card... again, seems like a "last effort" scenario.  We comp... Read more

More replies
Relevance 77.08%

I purchased my T500 within the first week Lenovo had it available for US consumers to order.  I was assured the machine was going to come with a WiMax card.  I gave it to my daughter to use.  We never tested WiMax since we did not have WiMax in our city until October of last year.  Came to find out, our machine did not come with a WiMax card as was promissed.  It has in it the Intel WiFi Link 5300 AGN card instead.  Needless to say, I no longer feel comfortable ordering from Lenovo anymore.  We got seven laptops in the house.  Five of which are ThinkPads.  However, we've moved over to Samsung after this unpleasant experience. Today I wanted to see if there's an updated version of the driver I'm running for my WiFi card, to my unpleasant surprise, the driver for the Intel WiFi Link 5300 AGN card in my T500 does not exist anywhere at www.lenovo.com.  I only see drivers for the Intel 5150 and the Intel 5350 cards. Does anybody out there have any idea where I can find the latest driver for the Intel WiFi Link 5300 AGN in my duped T500 laptop?  Thank you in advance for your help.

Answer:T500 - Intel WiFi Link 5300 AGN Driver

In the T500 driver matrix you will find the following entry;
 
Intel Centrino Wireless-N 1000, Intel Centrino Advanced-N 6200/ 6205, Intel Centrino Advanced-N + WiMAX 6250,Intel Centrino Ultimate-N 6300,Intel PRO/Wireless 3945BG, 3945ABG Network Connection, Intel WiFi Link 1000/ 5350, Intel Wireless WiFi Link 4965AG/ 4965AGN
 
Windows 7 (32-bit, 64-bit), Windows Vista (32-bit, 64-bit), Windows XP 08 Sep 2011 14.02.0000
 
The link leads you to the following download page:
http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-77063
 
This package installs the software (Wireless LAN driver and utility) to enable the following devices:

Intel Centrino Wireless-N 1000 (Intel(R) WiFi Link 1000)
Intel Centrino Advanced-N 6200
Intel Centrino Advanced-N 6205
Intel Centrino Advanced-N + WiMAX 6250
Intel Centrino Ultimate-N 6300
Intel PRO/Wireless 3945BG Network Connection
Intel PRO/Wireless 3945ABG Network Connection
Intel WiFi Link 5100 AGN
Intel WiFi Link 5300 AGN
Intel WiFi Link 5350
Intel Wireless WiFi Link 4965AG
Intel Wireless WiFi Link 4965AGN

1 more replies
Relevance 77.08%

I downloaded and installed the latest driver from Dell website. After install worked O K for couple of re boots but the problem now persists. Device Manager indicates that the driver is not working and the default windows driver loads. Occasional colored patches appear on the screen at random spots when this happens.. Running WIndows 10.  Please help!

More replies
Relevance 77.08%

Ever since I downloaded the Windows 10 anniversary update, my display has gone absolutely haywire. Weird dots all over the place, major screen tearing--it renders the pc basically unusable. I've isolated the problem in the graphics card--Intel HD 5500, driver version 20.19.15.4360. Disabling the graphics card makes all of the problems go away instantly. However, disabling it also means I can't dim the screen, use HDMI, or my Flex anti-blue-light software; being unable to dim the screen at all also drains the battery. I have tried uninstalling and reinstalling the driver, checking for driver updates, rolling back the driver to the previous version, all to no avail. I have contact Intel directly; they sent me a different, generic driver which I couldn't actually install because it said "The driver being installed is not validated for this computer." I've been all over the forums and Google and I haven't come across anybody else with this exact problem. I have been dealing with this for weeks now and it's driving me crazy--every time my pc updates I hope this will be the one that fixes it, and then, nothing. I have been nothing but happy with my HP Envy up until now, so this is really frustrating. Any help would be appreciated.

More replies
Relevance 76.26%

Does anyone have a concise explanation for this? Thanks for any info!

(just the digital signing (signature), not encrypting the file.)
 

Answer:Solved: How is data rendered unforgeable after its digitally signed?

If I remember correctly, it's has like a code, so it will know who is legit and whos not.
 

3 more replies
Relevance 76.26%

hi

i have problem with some of the messages received from out of my organisation.When i try to open

these messages in outlook 2003, it is showing a error message"Can't open this item. Your Digital ID

name can not be found by the underlying security system.". But this is not the case if i open the

message using Outlook Web Access.

Can any body help me in this regard.
Thanks
 

More replies
Relevance 76.26%

Someone else had this issue but their thread was closed with no answer posted on the forum. I have recently upgraded to Outlook 2010 from Outlook 2000. I am running Windows XP SP3. I am familiar with the proper way to exchange digitally signed and encrypted emails and have done it for a long time and it always worked fine on Outlook 2000. Since upgrading to Outlook 2010, I get no error message and neither do the recipients of my emails, however, the emails that I receive have no text in the body of the emails. I If the email is only signed and not encrypted, I can read the body of the email on my blackberry though, therefore, I know the text is there. If on my computer (and therefore on my outlook 2010) the body is blank. An encrypted email is unreadable on my blackberry.

I am NOT running Outlook Exchange and that is the only information I can find on the web. It is too bad that the other gentleman asking the same question in January 2011 did not post the solution to his problem on this forum, or maybe he never got a solution? Hope someone can help me. Thanks-
 

More replies
Relevance 76.26%

I'm really getting tired of having to f8 every time I boot up to game to turn off digitally signed drivers so I can use rivatuner. This is BS and I would really like to disable this permanently.

Help is VERY much appreciated!

Thanks in advance
 

Answer:How can I permanently force digitally signed drivers OFF in vista 64?

Remove updates KB938979 and KB938194
Command line / run as administrator
type: bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS
restart PC
 

11 more replies