Computer Support Forum

HP 10 Tablet 2101 won't shut off

Question: HP 10 Tablet 2101 won't shut off

Error message "unfortunately process android.process.acore has stopped" & "launcher has stopped". Tried to shut off tablet to reset but tablet will not shut off. hp logo just stays on













Solved!

View Solution.

Relevance 100%
Preferred Solution: HP 10 Tablet 2101 won't shut off

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: HP 10 Tablet 2101 won't shut off

If you hold down the ON/OFF button for about 30 seconds, will it power-off?

3 more replies
Relevance 58.22%

need help, can't shut down unless I manually hold down the power button, won't automatically restart on commant either.

Answer:x41 tablet window won't shut down windows xp sp2 (on command) have to manually shut down.

I would suspect a chipset driver at first. I'm not quite sure what chipset is on X41 tablet, you may take a look an choose from the list on the bottom of this page. Hope this help!

3 more replies
Relevance 51.25%

I recently updated my tablet, but now for some reason everytime I choose shut down my computer just restarts itself.  It won't turn off and I'm not sure what to do.  I've searched through google for help, and have done three things 1) Deactivated wake on wifi2) Changed the PCI card settings to automatic3) Turned off auto restart under system failure. Has anyone else had this problem or know the solution?

Answer:Tablet won't shut off

Number (3) would have been my first thought since Windows may be interpreting every shutdown as a system failure. Next, try holding CTRL-S when you click the shutdown button which will force closure. Be patient because it takes a while... If your PC still restarts automatically, research the manual shutdown.exe command and its various parameters. Maybe something there will provide a key... Another thought -- are you virus free? If you are under control of an invader, that could also explain this behavior.Ken

2 more replies
Relevance 50.43%

Ok so I gotmy X61 a couple of days ago and love it... mind you I have never been a fan ofall the preloaded software so I did a clean install, installed all of thedrivers that I wanted/needed and it worked flawlessly but ever since updatingwith SP1 (so it seems) that when ever I go to shut down the lap top it juststays on the shutdown screen. The ring of light still moves the whole time butit will never shut down. I have even left it on all night to see if it wouldbut it didn't. And from reviewing the other forms that have a similar problem,non of there techniques for solving it seem to either apply to the problem orsimply don't help at all.... Is there something I might be missing or hasanybody else had this problem?? One other thing I forgot to mention is that itdoes shut down some times but 75% of the time it gets stuck on the same screen.And it doesn't matter if I had it in sleep mode for any length of time as theproblem still occurs in both instances.













Solved!

Go to Solution.

Answer:X61 Tablet Will not shut down ... Tips?

Sounds like an issue with the O/S, I've seen this happen when some process that requires networking does not allow the O/S to properly shut down however there are many other possibilities.   I'd start with the MS Vista forum and look for similar issues on SP1.   Does other computers access yours through a network?   Are you accessing network resources when you shut down?





Full disclosure: Not a Lenovo employee, just someone with a X61 running Win XP SP2

3 more replies
Relevance 50.43%

Just got an X200 tablet and can't get it to shut down by using menu. I have to hold down the power source. Anyone have this problem?

More replies
Relevance 50.43%

Hi guys out there in Lenovo-landJust got an S10 3T and trying to get used to it.I mainly want to use it as an in-car GPS/communications system, and the best option is to make a framework to fit in the car in Tablet form. The only problem I have so far is not knowing how I can shut the computer down when in Tablet.I have put the tool bar on the right and made it disappear when not in use so I can maximise map area on the screen. But with the touch function on the screen, I can't activate the tool bar with my finger (only the mouse) so I can't access the shutdown option.Can anyone advise how I can do this, and is it possible to create a desktop shortcut Icon to shut down.Thanks for any helpMalcolm













Solved!

Go to Solution.

Answer:How to shut down when in Tablet mode

right click on the desktop and create a new shortcut, and enter the following text:  shutdown.exe -s -t 00 -f  

3 more replies
Relevance 50.43%

Tablet has froze and won't do anything at all we want to shut it down but cant really can't use anymore don't know about tablets computers etc.need help turning system off. Bought it today used for daughter to play games

Answer:tablet froze and won't shut down help

Please help with shouting down a windows 8 tablet as it may overload system or maybe even burn something up inside. We just want to turn the game off. And where do I find your answers or responses

4 more replies
Relevance 50.43%

I was using an Android Novo
10 tablet when it messaged "power off" and then shut down.Now
it won't restart, shows an
empty battery icon then the Green android logo
then blank as soon as I release the start button.
Tried the re-set to no avail. Charger tests OK and power onto the board so not the socket. I would have
expected it to run direct from the charger even if battery failure.

Answer:Tablet shut down and won't restart

Scroll all the way to the bottom of this link, perhaps the answer is there?. click here

7 more replies
Relevance 50.02%

Every time I action my surface to shut down, it shuts down then a few seconds later my tablet comes back on. It takes about 30 times of me closing it down before it actually stays shut down. Also, when I switch on my surface I have o bold down the on button for 30seconds, or my tablet wont come on. I'm confused, can anyone help?

Answer:Surface tablet wont shut down?

Hit it with a hammer.
But in all seriousness, which surface is this ? SP3, or S2? It might be in the process of downloading an update, or it might need to be updated.

3 more replies
Relevance 49.2%

I upgraded my Lenovo Thinkpad Tablet 2 to Win 10 a few weeks ago. Since then, it won't fully power down 9 times out of 10. I close all apps, and select shut down from the power menu, and it appears to go through the shut down process, but it stays powered - the haptic feedback Windows button buzzes when pressed. If I don't plug in the charger it will kill the battery.
The only way to power it back on is to hold down the power button for 15 seconds.
Any ideas?

Answer:Tablet won't shut down completely after Windows 10 upgrade

Have you checked for BIOS updates? power off is low level.

2 more replies
Relevance 48.79%

I had a Galaxy Tab 2 7.0 until yesterday and it was stolen. How do I disable anyone from buying things on Google Play?
 

Answer:Tablet Stolen - How to shut down Google Play account?

8 more replies
Relevance 48.79%

Dear,     I purchased new x220 tablet Win7 Pro, when I'm shup down window completely and close lip the battery LED light and half moon light sleep light are til on and linking about 5 second. Eventhough I set onp power option shut off when close lid. Is that normal for x220 talbet. Please advise, anyone have same problem. Thank in advance

Answer:x220 tablet battery & sleep light on when shut down

hey IBMx220tab,that should not occur. could you uninstall the power manager software and then set the same settings via the windows power manager.close the lid and see if the same problem happens.if it doesnt, i recommend heading to http://support.lenovo.com and install the latest power manager.





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

1 more replies
Relevance 48.38%

Hello, when I connect the tablet with the keyboard-dock, the system immediately shut-off. If the tablet is connected to the keyboard-dock I can not start it. Otherwise I can start the tablet without the keyboard-dock. I tried to install all up to date driver, but nothing changed. I also pushed the reset button (minimum 10sec with and without connected Power).  It seems as if is a hardware problem not a software problem. Have anybody had the same problem? Greeting Michael

More replies
Relevance 47.97%

2 weeks ago I left my Lenovo Yoga 2 in tent mode with music playing and fell asleep, like I do every night. Since then it won't leave tablet mode on the screen. I have tried every update, driver reinstall, etc. that I have found on the internet and this forum - I even did a factory re-boot (which caused more headaches). I can force the screen back into laptop mode by going into Screen Resolution and turning off auto rotate. However, my keyboard doesn't work because it thinks it's still in tablet mode. If I turn on the laptop, log in, and then hit restart, the keyboard works. From what I gather there was an update for power management that may have caused this. I can't find a link to the 1.66 version that they say works fine. I would like to try that. And anything else that might work.

Answer:Lenovo Yoga 2 11 inch defaults to tablet mode after sleep or shut down

 
Dear muthermcree:
 
Thanks for Contacting Lenovo.
Would you please check (Rotation Button) that located in the right side of the machine?
And till us if it show you any notification on the screen when you Use that (Rotation Button)





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

2 more replies
Relevance 46.33%

Hello,I just purchased new SSD ADATA Pro SP900 256GB SSD and when I want to boot my computer I got error2101  Detection error on HDD1 (mini sata).At the first start, there was no error and everything seems working but when I try to open SSD in windows, the disk was uninitialised. I tried to initialise it but without success, so I reboot the notebook and got this error. I installed lastest bios, try to remove SSD wait some time and reinsert it but the error still appear. Does anybody have solution? I figure that this error is quite common. Thanks













Solved!

Go to Solution.

Answer:E531 SSD error 2101

Hello, the problem was in faulty SSD drive. Seller told me that he probably got some bad series of this SSD because almost 60% of sold was not working, so I returned it and picked up Transcend MTS400 256GB which works like a charm.

1 more replies
Relevance 46.33%

I get the following message when I turn on the laptop: 2101: Detection error on SSD (M.2) The laptop (T560) is new and was only received on the 13 May 2016.  When it occurs I run thediagnostics and can usually get the machine to boot up. However, the error then reoccurs at a later stage, usually if the machine has been idle for a while.  I have lodged a service call with Lenovo but thought I would share my experience here and see if anyone else has the same issue? 

More replies
Relevance 46.33%

Hello,I just purchased new SSD ADATA Pro SP900 256GB SSD and when I want to boot my computer I got error2101  Detection error on HDD1 (mini sata).At the first start, there was no error and everything seems working but when I try to open SSD in windows, the disk was uninitialised. I tried to initialise it but without success, so I reboot the notebook and got this error. I installed lastest bios, try to remove SSD wait some time and reinsert it but the error still appear. Does anybody have solution? I figure that this error is quite common. Thanks

More replies
Relevance 46.33%
Question: x260 Error 2101

I have a X260 with a Samsung 850 EVO SSD installed connected to the normal SATA cable. Recently, the system ran down in hibernate or sleep mode until the battery was completely drained. The next time I started it up, Iwas presented with an immediate error after the logo of "2101 Detection error on SSD(M.2)". Booting into BIOSor UEFI diagnostics doesn't show any options for diagnosing the SSD. What is odd is there is no M.2 SSD. ?Right nowI am traveling and don't have a SATA-USB cable or another drive to try, but is there any possibility this is something other than my SSD failing completely? System does not boot. Things I have tried already: Reseating the SATA cable, Resetting BIO S to default settings, "Power Cycling" the SSD. All checks in UEFI diagnostics pass.

More replies
Relevance 45.51%

Hi, So I just got my T430 in November and recently it had been blue screening. I decided to factory restore and ever since the factory restore I have been receiveing a 2101 Error every time I restart, and only when I restart. I have no idea what to do, anyone have a solution?













Solved!

Go to Solution.

Answer:T-430 2101 Detection Every Time I Restart

Hi, mboon
 
I tried to do some research on your error, but Microsoft has little listed for a code 2101 error. Could you possibly reboot your machine at some point and copy down the error message in its entirety? With more information, we might be able to figure out a fix.
 
Best, 
Adam





______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

5 more replies
Relevance 45.51%

Hi all. I have a 1 month old t450s bought directly from lenovo. Standard HDD and ram, decided to go with the HD+ IPS monitor (very good) and opted out on the 16gb ssd. I've bought a crucial balistic 8gb stick and a Transcend MTS400 128gb ssd m.2. I've installed everything and it was all working well with the eventual 2101 error on boot after resuming from sleep. Since my OS is installed on the SSD I've disabled the sleep mode, because boot time is less than 5 seconds. Anyway, a week ago I've started experiencing random freezes doing regular tasks (browsing, documents...). Yesterday the computer was frozen, I've power cycled it and I was greeted with a 0xc0000225 blue screen (something on the lines of file system not found).I've tried everything, system repair, changing the UEFI settings, reseating the ssd, running the Lenovo bios diagnostics (all green). Nothing works. Any ideas? Thanks!

More replies
Relevance 45.51%

Hi AllHave installed Windows 10 on ADATA SP600 120Go SSD M.22 on my T440. All was ok for month (10 month exactly).Recently i updated the bios to the latest one : 2.44 (I don't know which version I had before :-( ).And know the laptop reboot regulary with the error message : 2101 detection error on SSD M.2 Any suggestion are welcome.My first Idea is to downgrade the bios but offically it is not possible. I did not find the way to do.Thanks for your helpChristophe 

More replies
Relevance 45.1%

Hi guys im loving my W350 but on start up I get an error message saying 2101 error miniSata drive not detected. It has also done this once whle in use which is more worrying. I have taken the keyboard off, removed the 16gb mSata and replaced it, but it still is not being detected. If anyone has any thoughts Id be really grateful. Cheers, Al.

Answer:W350 2101 mSATA not detected, anyone else getting this error?

Oh actually, after i put the drive back it it booted up and was visible in the  device manager, but dissappeared when clicked on.. thanks for your thoughts.al

5 more replies
Relevance 45.1%

Hi, I just updated BIOS ver. from 1.30 to 1.37. Had no problem with it. The system restarted and got the message that " 2101: Detection error on HDD2 (mini SATA)" This is a Crucial M4 256Gb SSD, which I'm using since 5 month. Changed it back to my old KINGSTON 64GB SSD , and it works. I've downloaded BIOS ver 1.3 , downgraded the system, but the problem still exists.It boots without any problem with the Kingston , but not with the Crucial. Currently I don't have another computer to test the Crucial SSD if it's broken, but I think it's rather BIOS related. Plese advise what to do now, because I had all my work on that SSD.  Regards,Gabor













Solved!

Go to Solution.

Answer:T420SI 2101 ERROR after BIOS update

Contact Crucial. If another drive works then it may be dying and the error is a result of the status.





T520 Model 4239 Intel(R) Core(TM) i7-2860QMbr>; Nvidia NVS 4200M Win 10 64bitZ70-80 I7 - 5500U 16GB GB - 1TB HD Win 10 64bit FHD 17.3", G840 w/2GB

2 more replies
Relevance 45.1%

Hi Team.So my thinkpad t450s just crashed in the midst of playing some music.Then it rebooted and said 2101: Detection error on SSD1 (M.2)I cant come back to my OS because it is installed on the said SSD.Already read the manual and opened the thing up and cleaned and reseated the SSD. But does not help.Guess the SSD is broken? OR does anyone have any other ideas??Thanks a lot!

More replies
Relevance 45.1%

Hi, I just received my T430 about 4 days ago and it's working perfectly until I was trying to install important windows updates. As I was rebooting my laptop after the installation (which fails everytime I don't know why), my computer gave me a loud beep and a error code of 2101 detection error. So I searched this forum and found this solution http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT074404 from another post that had the same problem as mine.As i was following the steps,( i did cmd, uninstalled express cache, and did disk managment) but as i went on my disk management i could not find my mSATA. I have a 16 gb mSATA and it was working perfectly fine before. I've noticed on my reboot that it took longer to load and the error message would then come up.So my problem is that I cannot view my mSATA disk on my disk managementThankyou!

Answer:2101 Detection Error: Cannot view my mSATA

The Error 2101: Detection error on HDDx miniSata is a BIOS error. This has nothing to do with the operating system you have installed or any drivers. During the POST, the system does not see the miniSata drive. I (like some others) received my new T530 recently, setup it all up and then a few hours later received this error. The solution is simple. You must open up your ThinkPad. Remove the two keyboard screws and remove the keyboard and RE-SEAT the miniSata drive. There is 1 screw holding the board down. Remove it, re-insert it in. Screw everything back up and voila, no more issue. Go to the Lenovo / ThinkPad Guides and Manuals page for your device (http://support.lenovo.com/en_US/guides-and-manuals/default.page?) and download the Hardware Maintenance Manual for your ThinkPad. There are clear instructions (for those less inclined) on how to remove the keyboard. You do NOT need to disconnect the ribbon cable. Simple / carefully slide the keyboard forward and the miniSata drive will be visible and accessible. You can also use the ExpressCache program to get stats on the miniSata drive and see how it is working. Open a Command Prompt (in Administrator Mode) and issue the command: eccmd -info   -   Display ExpressCache activity informatio eccmd -?   -  Will show you all options eccmd -format   - Will reformat and clear the cache drive. Hopefully, this will help out those out there with this issue. Ju... Read more

2 more replies
Relevance 45.1%

I tried very hard to find an official answer. I had my x220 bios updated to 1.40 version and installed the mSata 500GB EVO SSD drive to the laptop. It has never been detected successfully.  It was a big hard to insert the mSata drive to the slot and finally it was in the write position I'm pretty sure and the screw is aligned... Any idea?

Answer:mSata Samsung 850 EVO SSD in X220... 2101 Detectio...

Hello,
 
I have only tried a couple mSATA SSDs in my ThinkPad X220, but each one was detected immediately without any error.
 
Do you know if the 500GB Samsung 850 EVO mSATA SSD worked before you used it?  Perhaps you could try it in another machine, or with an mSATA to 2.5" adapter, just to verify that it works correctly?  Although it is pretty rare to occur, you could have gotten one that is just not working.
 
Regards,
 
Aryeh Goretsky
 

2 more replies
Relevance 44.69%

Hello! I just recieved a new T530 I7 and also a Crucial M4 mSata SSD (CT256M4SSD3). The issue I have is sometimes the system will give a 2101 detection error at Post and the only way around it is to power off again, remove the battery/AC and try again. Ive seen other posts regarding this error but no clear resoution. 













Solved!

Go to Solution.

Answer:Intermitent 2101 detection Issues with new T530 and mSATA

Called Crucial support.   They had me change the Intel 7 AHCI controller driver from Intel to the Standard Microsoft driver.  They suspect that the Intel driver is causing the drive to not shutdown properly.  I'll see how it performs with the generic driver for awhile.

9 more replies
Relevance 44.69%

So I've read through the history of the msata and the x220 (4286-CTO) and how the BIOS revisions were required during the middle of last year in order to get the Intel 310 and some others to work. Thinking that my little x220 with Bios revision 1.26 (i7, 8gb, 4286-CTO) would be fine, I purchased a Kingston SSDNow mS100 64GB mSATA Internal Solid State Drive SMS100S2/64G and installed it yesterday. The instal went without a hitch, but when I restarted the machine, I received a 2101: Drive detection error on hdd2 (mini sata) error.   I've seen that the 2101 error has been mentioned in relation to a couple of Sandisk msata drives on the forum, but those discussions didn't seem to go anywhere. I just got off my second call with Lenovo support (30 minutes today and 25 minutes last night), only to have them tell me that msata is not supported by my 4286-CTO.  That sounds incorrect, as others with the 4286-CTO seem to have luck with Intel and Renice. What am I doing wrong?  Is this something that another BIOS revision could cure?  At least on one of the sandisk discussions, the OP said that he/she had tested the drive in another computer without a problem, so I don't think it's a problem with the actual drives.   Somebody else mentioned that some drives are not compliant with the JEDEC standard, but that doesn't sound like an explanation to me either.  Thoughts?  Help! Best, sad x220

Answer:2101 Error: X220 with Kingston 64GB msata

I have the same issue with x220.  The mSATA I have is the Sandisk SDSA4DH-064G.  I can also add that the function of the mSATA is the same regardless of whether the mSATA is used in the mSATA slot or on an adapter card in the SATA hard drive bay (Error is 2100 rather than 2101, but the text is the same).  For this reason, I believe the Lenovo BIOS is unable to configure the mSATA drive appropriately.  I imagine that Lenovo could quickly resolve this with a new BIOS. I have tested this drive on a desktop consisting of a Asus P9X79 Deluxe + Intel 3960x running Windows 7, 64-bit.  Device is recognized by BIOS and WIndows Disk Manager. 

9 more replies
Relevance 44.69%

(i have updated the title. sounds more like it. ^_^) Greetings ! I am a proud (well, yes ...) owner of the E530 A3G-Model sporting a 16GB SSD.Yes, the one with the pulsy, noisy fan. ^_^  The Story: Last week i thought i'd need a change and try something new. As i'm not really a noob oncomputers, i thought i'd set up Win7 x64 SP1 on the SSD. That's ... not that easy,considering the size, so i've spent the weekend removing irrelevant components ...... like Natural Language, Speech Support, Language Packs ...... from the Win7 x64 SP1 Installation Disks. It took me two days to get it to work, with several testing sessions using VirtualBox,but then i got it right. I haven't removed any drivers, services or anything actually essentialwhich could break the system. (I promise!) So ... after a long session in VirtualBox and installing this system on a small partition on my HDDto verify it REALLY works, i went going on to install it on the SSD. Please note that RapidBoot is turned off in the BIOS and i have removed ExpressCache,which i had previously installed manually, but wasn't actually caching anything anymore,for reasons i don't understand. Maybe i have turned it off weeks ago, i don't know. So, i have set up a 3GB FAT32 partition at the beginning of the SSD for the pagefile. It's a habit.It's a good idea to do this on HDDs, so i kept doing it. Longevity of the SSD was no issue for me,as if it breaks ... well, then it breaks ... but the... Read more

Answer:ThinkPad E530 and the case of the vanished SSD (msata 2101)

Oh ... i forgot to mention that the 2101 error doesn't even show up anymore.

1 more replies
Relevance 44.69%

Hi there, After about month of use I suddenly got an error: "2101: Drive detection error on hdd2 (mini sata)". Simply while browsing the internet system hung up and after reboot the error appeared.I've read that people here had same error just after mounting their SSD's - mine worked fine for few weeks.The problem appeared short time after auto-updating BIOS but not just after flash. 2 or 3 restarts gone smoothly.Strange is that now my BIOS version is still 1.16 when on the web since last Wednesday hangs ver. 1.17 - the update went on Saturday.Any ideas how to avoid sending anything (Laptop and SSD) to RMA? I have already RMA ticket from OCZ but want to save some time and don't want to lose the data.Besides I'm not sure if it isn't issue of the new BIOS from Lenovo. Thanks in advance for any help.Gootchio 





--------------------ThinkPad T430 (2344-52G)i5-3210M, NVS5400M, 16GB Corsair Vengeance, 120GB OCZ Nocti SSD + 500GB HDD, Win7 Pro









Solved!

Go to Solution.

Answer:2101 Error: ThinkPad T430 and OCZ Nocti 120GB

Hello gootchio,
Welcome to the Lenovo Forums.
 
You should try and reseat the drive the computer is not detecting.  This should reset the code and hopefully correct the problem.





Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve the problem you encountered? Click Solution Provided to let us know!What we Do in Life will Echo through Eternity. -Maximus Aurelius

7 more replies
Relevance 44.28%

I got this error out of the blue the other day on startup, and now I get it every time I restart.  I have tried a number of solutions that I found in these forums (which I'll outline below) but it seems like my system just can't find the drive anymore.  Here's what I've done: 1. ran the ExpressCache program via Command Prompt (eccmd.exe -info) and got this error:  "**ERROR** ECCmd Request device is not available"2. unistalled the ExpressCache software, shut down, pulled the battery opened up the memory module slot cover, removed the mSATA drive and then re mounted it.3.  reinstalled ExpressCache4.  I'm trying to reformat the drive, but I am receiving similar errors     a.  When I try to format the drive (eccmd.exe -format) I get the following error:  HFS Volume is not mounted  **ERROR**  ECCmd Requested device is not available     b.  When I try to create a partition (eccmd.exe -partition) I get the following error:  0x10df (4319).  I looked this up and maybe there are system files missing? I have also tried this but it then says "There is NO mSATA detected, please check mSATA attached" http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?DocID=HT073737 If anyone has any advice, please let me know.

Answer:2101 detection on HDD2 (mini sata) error on my T430

Hello and welcome,
 
None of the symptoms you describe sound to me like software issues. There is something wrong with the mSATA SSD, or the controller that accesses it - or it needs to be re-inserted in its socket.
 
Is this machine under warranty?  I'd suggest calling support and running this by them.  They may suggest re-seating the device in its socket, or may offer replacement or some other option.  I don't speak for Lenovo, just offering my personal suggestion.
 
Z.

3 more replies
Relevance 44.28%

I started getting this error everytime I reboot my machine. If I press ESC boot continues fine. Whats strange is I dont eve have a HDD2 Mini Sata, and if I do I have never known about it and I cant set it in device manager, etc. How do I get the machine from stopping to try and detect this? Very annoying. 













Solved!

Go to Solution.

Answer:T530, 2101: Detection error on HDD2 (Mini Sata)

Disconnect AC power, remove battery pack, wait for a while, then put everything back and try if 2101 disappears.

5 more replies
Relevance 44.28%

I ordered the mSata mini 128GB card to go into the half size slot under thge keyboard.  However when I boot I get:  "2101: Detection error on HDD2 (Mini SATA)".  I thought that a half size drive would work, as it does it my Lenovo W520.  However it appears the BIOS does not recognize it.  It does however recognize it in my W520. Has anyone else successfully added a second drive internally to the X1 Carbon Touch? http://www.mfactors.com/msata-mini-half-size-sataiii-ssd-128gb-64gb/  













Solved!

Go to Solution.

Answer:X1 Carbon - "2101: Detection error on HDD2 (Mini SATA)"

Hello and welcome,
 
No personal experience here, but I do see this note on the page you linked:
 
Note: Only works with systems with mSATA standard connector. NOT compatible with Mini PCIe slot for WWAN/wireless cards
 
The way I read the Hardware Maintenance Manual  that slot is WWAN only, not a WWAN/mSATA combo slot.  Could be wrong.
 
Z.

2 more replies
Relevance 44.28%

I've read a lot about the 2101 Detection Error of mSATA issue on x220 with mSATA other than intel 310 installed. Last year I purchased a W520 and an Intel 310 mSATA. They worked fine together untill yesterday. I have windows 7 enterprice 64bit installed on the mSATA and linux installed on an SSD. I have a 500GB HDD installed in the ultrabay, as a shared data volume shared by Windows and Linux. Everytime I try to boot windows, it fails. And during the next reboot, the "2101 Detection Error" shows up. To try to solve this problem I have the mSATA reseated and the 2101 error disappears, until I try to boot windows again. Everything works fine IF I ONLY BOOT LINUX. 2101 Detection Error shows up everytime I TRY TO BOOT WINDOWS UP. I've updated the UEFI BIOS to the latest version which is 1.36 but the problem is still there. I've used the lenovo diagnosis tool (bootable usb) to run a set of quick tests and no error detected (except for drive self test either not supported or not passed). Please find the configuration of my laptop below:======================================W520-4270CTOCPU:                                 I7 2720 QMMEMORY:                        16GB (4GB SAMSUNG X 4)VIDEO:                   ... Read more

Answer:2101 Detection Error with mSATA on W520 with Intel 310 installed

Is the mSata card first in the boot order?

9 more replies
Relevance 44.28%

I recently bought an OCZ Nocti mSATA SSD for my w520 and after I installed win7 on it, the system started showing 2101etection Error on HDD2(mini SATA)...... does anyone know how to fix it?? thank you!

Answer:How to deal with 2101: detection error on HDD2(mini SATA)

I had this problem with w510 and corsair force SSD. but after update a laptop BIOS and SSD firmware I have this problem very very rare (may be one time per have a year)Stas

2 more replies
Relevance 43.87%

Hello Lenovo Community, My laptop is as follows:Lenovo T430sMachine Type: 2352-CTOWindows 7 Home Premium 64-Bit Please let me know if there is any other necessary information. Problem:During startup, I receive the above "2101 Detection error on HDD2 (Mini SATA)" error. It is important to note that this problem is intermittent. I have a 16gb mSATA installed on my computer. I've attempted to do the following to fix this error: 1. Run several virus scans - no viruses apparent2. Earlier I ran "eccmd -info" and the command prompt indicated that everything was working correctly.3. I reseated the mSATA card last night.4. Today, when I run the same command as an administrator: "eccmd -info" ------------------------------------------------------------------------------------------------------------------------------------------------------------C:\Windows\system32>eccmd -ifnoExpressCache Command Version 1.0.86.0Copyright? 2010-2011 Diskeeper Corporation.Date Time: 7/8/2014 17:33:18:579 (STEVEN-THINK #0)HFS Volume is not mounted.USAGE:ECCmd [-NOLOGO][-INFO | -PARTITION | -EXCLUDE | -CLEAREXCLUSIONS | -FORMAT | -PRELOAD]-NOLOGO - No copyright message will be displayed.-INFO - Display ExpressCache activity information.-PARTITION - Create an ExpressCache partition.[DriveId] - Optional drive ID[PartSize] - Optional partition size in MB-EXCLUDE - Exclude a drive from being cached.DriveLetter - Drive letter-CLEAREXCLUSIONS - Clear all cache exclusions.-FORMAT - ... Read more

More replies
Relevance 40.18%

running 1.40 biosthink I have WWAN model as there is a SIM slot and there are a red and blue wires ready for the 3G wireless card.all lenovo drivers etc checked to latest versionsInstalled 128GB Kingspan which failed to do anything and caused the whole system to be unbootable. Turns out the ssd was dead as it did not work in working usb enclosure.swapped in 64GB msata minipci from my old eee901 it is the correct size for the lenovo slot - it wasn't for the 901 and I am now getting 2101 Detection Error on hdd2 on boot up.I have tried reseating the card, cleaning the pins, reseating, booting to Hirens, Slacko, Gparted, Fedora and not been able to see it as the error code is pre OS... Anything I can do? - roll back drivers, roll back bios, buy specific brand msata any suggestions welcome :-)

Answer:Error 2101 Detection error on HDD2 (mini sata) X220

HiIt seems newer drive is needed or its firmware. Chek out SSD manufacturer site for fw update.Since x220 BIOS 1.16 or something like this one, msata SSD error detection has disappeared. Except of rare cases with some Crucial (or Corsair, didn't remember) and Samsung drives. Also do not use OCZ drives.

7 more replies
Relevance 40.18%

Whenever I try shutting down my computer normally, it is extremely slow and displays the message: Error 2101  Detection error on HDD2 (mini sata). This causes some problems on my computer. My laptop is a Thinkpad T530 with Intel Core i7, 500 GB HDD, and 8 GB RAM. Any suggestions?

Answer:Error 2101 Detection error on HDD2 (mini sata) in T530

do you have mSATA installed on the system???

6 more replies
Relevance 40.18%

I got my 430s, and it's with a 16Gb mSATA SSD cache inside.Now everytime when I open my PC, it shows Error 2101 Detection error on HDD2 (mini sata) and I need to press ESC to continue.Is there any software or driver's problem, or it just phsically got wrong?Any techician could help to solve, or I have to do it my own?










Solved!
Go to Solution.

Answer:Error 2101 Detection error on HDD2 (mini sata) in...

Have you ensured you are running the latest BIOS?  What version BIOS do you currently have? After pressing escape does the computer boot normally?

9 more replies
Relevance 40.18%

Model: T450sEquiped as:Intel i54+4GB RAM256GB SSD (M.2) Configured as boot disk running Win 7 x64500GB HDD as additional storage Issue:Seemingly at random, approx once every one to two weeks while PC is on and at the desktop but not actively being used (meaning no user is sitting in front of it performing tasks) it will error and crash.  The error is a black screen with the following error: 2101: Detection error on SSD1 (M.2) Press Esc to continue. According to the user Esc does nothing and the only escape is to long press the physical power button until a power down occurs.  On reboot the system comes up without issue.  No user has actually seen the crash take place.   MY QUESTION(S):1st.  Is this most likely an issue with the T450s not being able to reliably boot from the m.2 slot or is this more likely an issue with the SSD installed in the m.2 slot?2nd.  Is this something altogether different?  Any (knowledgeable) advice or info appreciated.

Answer:T450s Thinkpad - ERROR 2101: Detection error on SSD1 (M.2)

It is hard to diagnose without seeing it, but my experience has been that the Gen4 and later CPUs (like yours) support a very low power state that is incompatible with some devices. (that would make it a problem with the card) Make sure you have the latest BIOS and power manager software installed. Look in the device manager and find the M.2 SSD. There should be a power management tab. Turn off the option to allow the system shut the device off to save energy.

4 more replies
Relevance 40.18%

Hi guys, I fitted a 64GB Sandisk P4 mSATA SSD today in my week old X220 4287CTO & get this error, I thought it maybe the bios causing the problem as reported in the forum but the threads I have read seem to be the SSD not being recognized at all. Any help would be appreciated. Product SKU: 4287CTOProduct Name: ThinkPad X220 - 3 Yr Depot Topseller Warranty Intel Core i5-2410M Processor (2.3GHz, 3MB L3, 1333MHz FSB)7 Home Premium 64 English12.5" Premium HD (1366x768) LED Backlit Display, Mobile Broadband Ready, 2x2 Antenna2 GB DDR31333MHz (1 DIMM)Keyboard UKFingerprint Reader720p HD Camera20 GB Hard Disk Drive, 7200rpmNo Micro Solid State DriveThinkPad Battery 29+ (6 cell)Country Pack United Kingdom with Line cord & 65W AC adapterBluetooth 3.0Intel Centrino Advanced-N 6205 (2x2 AGN)Integrated Mobile Broadband - Upgradable

Answer:Error 2101 Detection error on HDD2 (mini sata)

Yeah I am getting the exact same error 2101. Also X220 but 4286-CTO which I brought from US. The BIOS version is 1.17(highest I can find now).Wonder if it is a compatibillity problem or simply the bios is not programmed rightly.

7 more replies
Relevance 38.54%

Just got this, and did a clean install of Windows 10 Pro. Installed all drivers, nothing funky in Device Manager, but the touchscreen and the pen are not working. Click on Pen Tablet Properties in Control panel and it tells me Supported Tablet Not Found on the System. This is my first time dealing with one of these, and am lost.  Lenovo Thinkpad X220 TabletIntel i7-2640M(2.8GHz)8GB RAM, 250GB Solid State Drive12.5in 1366x768 Multitouch LCDIntel HD GraphicsIntel 802.11agnBluetooth1Gb EthernetUltraNav, Secure Chip,Fingerprint reader, Camera

More replies
Relevance 38.54%

Hi all, I have recently upgraded to windows 7 (64bit) and now when I  put my tablet into tablet mode, the screen doesn't autorotate and none of the tablet buttons work. In order to rotate the screen I have to right click on the desktop and choose graphic properties/rotation.Interestingly if I press the tablet buttons while in tablet mode and then rotate the screen up to notepad mode within a few seconds the button will perform its function (rotate screen, activate tablet shortcut menu, etc). Does anyone know how to fix this problem? I've tried running system update (4.0) to no avail. Cheers

More replies
Relevance 38.54%

Hello. We've got an unusual problem when applying driverpackage for lenovo x201.OSD with SCCM 2007.. The Audio driver installs successfully during OSD (with silent install switch) and in devicemanager we can see that the conexant 20585 Smart Audio HD driver has been installed. Same with "Intel screen audio". But in the Audio options in controlpanel all the fields is grayed out.There is with other words no associated soundcard / standard device. If we install the driver again, logged in as an user the recently grayed out fields in Audio options automagically now shows the correct input / output devices (Conexant audio) and the sound starts working. Is there some issue when installing drivers in SYSTEM context?Notice: There is no "?" in device manager. BR!

More replies
Relevance 38.54%

Greetings, My system is i7 Multitouch X230t. It was working fine from last 2 months till today when while turning my screen from laptop to Tablet configuration the touch and pen function suddenly disappeared. When trying to access the Pen and Tablet setting it gives an error " A supported tablet not found on the system".Also at the same time i noted that in my device manager a USB device is now labeled as Unknown device. I searched the net and tried everything.  Restarting. - No effectUninstalling the unknown USB device and restarting - No effectUpdating all lenovo drivers from the lenovo Site - No effect System Recovery to an earlier Date (15 days) - No effect When i Tried to update Lenovo Multitouch/pen driver from lenovo site it give error " A supported tablet not found on the system" and aborts installing the driver. I uninstalled the wacom driver ISDdrivers.exe from windows Uninstall utility and again tried to install Multitouch and pen drivers but again it says " A supported tablet not found on the system". Someone please help. I am afraid it might be a hardware issue as the problem started when i turned the screen from laptop to tablet mode. Currently My X230t is just a Laptop and NOT a TABLET as there is NO touch and NO pen input, as if windows doesn't even recognize any tablet hardware on board. PLEASE HELP. Thankyou 

Answer:Help: X230t " A supported tablet not found on the system" Problem. Its not a tablet anymore

Perhaps the cable got severed when you were turning it around? I've had a Wifi antenna cable break this way on an HP tablet... If it's still under warranty have them check it and replace it if necessary. It could also be a loose connector but there's no way to be sure without opening the screen assembly.

1 more replies
Relevance 38.54%

I have a Tablet drawing monitor, and today the pen stopped working, I fiddled with it for a while, I tried uninstalling the drivers for the Hardware and reinstalling, but then I noticed that the Tablet Settings and Calibration Options you normally see in Control Panel are mysteriously gone. After maybe 2 hrs of googling I've given up,. there's very little on google, and now im considering doing a "Rest This PC." Any help would be appreciated.

More replies
Relevance 38.54%

I have a projector that I use to project things from my computer, but I have no way to show a drawing process.

More replies
Relevance 38.54%

I have a Tablet drawing monitor, and today the pen stopped working, I fiddled with it for a while, I tried uninstalling the drivers for the Hardware and reinstalling, but then I noticed that the Tablet Settings and Calibration Options you normally see in Control Panel are mysteriously gone. After maybe 2 hrs of googling I've given up,. there's very little on google, and now im considering doing a "Rest This PC." Any help would be appreciated.

More replies
Relevance 38.54%

(I've just tried "preview post" several times and each time it's stripped the whitespace and turned my ten paragraphs into a megaparagraph. I'm going to try pressing "submit new thread" and hope it doesn't do it this time.)

Hello
My Wacom tablet's pen has died and I hope to have a new one arriving in a few days but in the meantime I dug out an old Hanvon Rollick tablet which isn't supported under Windows 10 (which I use) but I nevertheless found some Windows 7 drivers for it which people reported working under Windows 10.

The problem is my PC is trying to behave like a tablet e.g. putting that blue teardrop thing on text boxes on Chrome (I'm not sure of its correct name) and when I try to ctrl-click a link, it shows a little "ctrl" label under the cursor and won't open the link in a new tab like it's supposed to and just does it in the same tab.

It takes multiple tries to right-click and open a link and when I hover over the link the cursor keeps rapidly flashing between the arrow and finger icons.

It is very difficult to click minimise, restore or close on Chrome because hovering over them doesn't make them go red and clicking on them doesn't tend to make them do anything unless you try many, many times.It's being profoundly irritating in programs other than Chrome too but those are some examples.

I was used to old my Wacom (Volito 2) trying to do tablet-like things but stopped it doing bubbles with gpedit's "turn off pen feedbac... Read more

More replies
Relevance 38.54%

Tablet PC Settings not showing in Control Panel Although Tablet PC Components enabled in Programs & Features.
I have tried System Restore, re-enabling Tablet Components...

More replies
Relevance 38.54%

When I use the X220 as a laptop I can duplicate the display through my SmartBoard projector but when I use it as a tablet and it is docked I have to turn the tablet and dock 180 degrees so I am not writing upside down on the smartboard;  that means the dock has the cables coming out the front.  I can undock and plug everything into the X220 but the beauty of the dock is that I don't have to!

More replies
Relevance 38.54%

After a fatal error in my windows, I had to reinitialize my windows 10. After I did so by the windows original tools, the windows became completely stable, but all tablet features are lost. Even thinkvantage cannot recognize many features and hardwares do not work. What should I do?

More replies
Relevance 38.54%

Hi. Recently, I have noticed that wifi connection in Tablet mode in my Thinkpad X230 Tablet is significantly slower than in laptop mode. Sometimes, it completely disconnected to the network. I tried to test with Speedtest. net and download a file via Internet Download manager. Both show that laptop mode has significantly higher and better speed connection than does laptop mode.  Does anyone have the same experience as me? Is the antena has any problem??? Thank you. I 

Answer:wifi connection on tablet mode - Thinkpad X230 Tablet

which model wifi card do you have? intel 6205, 6300 or ThinkPad 1x1 or 2x2.

3 more replies
Relevance 38.54%

I have a Cherry Mobile Alpha Morph that works without problems aside from the fact that, when I undock it from the keyboard, it doesn't detect that it should now be in Tablet Mode. I have to manually go to the Action Center and toggle it there. Same with docking it back. I have already checked my settings and I didn't disable Tablet Mode either.

Anyone have an idea how I can resolve this? I just want to seamlessly dock and undock the tablet and it should switch to tablet or desktop mode respectively.

I don't know if it's relevant but the OS is Windows 10 Home Single Language.

Answer:Tablet mode doesn't get engaged when I undock my Windows tablet?

I would like to know how to enable this as well - In fact, I was hoping to be prompted to change modes when dock/undocking....instead of having to find the setting and toggle tablet mode on/off every time.

2 more replies
Relevance 38.54%

I am currently on a Dell Venue 11 5130 with a Bay Trail Atom Z3770 and 2GB ram. While it serves the purpose of my usage of office suites and web browsing, I could use a little faster tablet. It would stutter if I have more than 5 tabs open on Edge. But there is nothing wrong with this tablet with a plenty of battery life and nothing broken after using if for close to 4 years now.
I am looking at a Dell Latitude 11 5175 tablet with a Core M3 and 4GB of ram. Is this upgrade worth it? Or should I save some more money to get the Core M5 version for around $150 more? My usage is office word, and youtube.

More replies
Relevance 38.54%

I think iBall Slide i701 is the cheapest tablet in world (windows) even cheaper than Lumia 430.
http://www.amazon.in/gp/product/B00XVGQ0WM/ref=s9_simh_gw_p147_d1_i1?pf_rd_m=A1VBAL9TL5WCBF&pf_rd_s=desktop-1&pf_rd_r=1QHP7BJT33XWDP2N4NQG&pf_rd_t=36701&pf_rd_p=577130167&pf_rd_i=desktop
Only USD 77$
But i have some questions before i proceed to buy it for my child
1. As it is 16gb tablet but in actual we get only 4gb free space & i have read in reviews that once we update windows & other apps we are left with only 400mb space & we cant install other apps. So is it possible to install software's (.exe) on 64GB memory card which this tablet support ?
I am not talking about APPS, I am talking about .exe files like photoshop, ERP, educational softwares etc.
2. As it is having only 1 USB port so it is possible to attach a USB hub so that we can attach pen drives, KB, Mouse, HDD, 3g Dongel & power adapter at once ?
If anyone of you have used any windows 8/8.1 tablet then please reply.

More replies
Relevance 38.54%

hi guys i really want to try a windows 8 tablet and i plan to buy it either by the end of this month or by next January. I am confused on what to pick though
First of all, the reason why I want a windows 8 tablet IS because i like the interface. but more importantly, i need metatrader and cTrader in legacy app as im a full time forex trader. I have metatrader in my iphone but you cant seriously compare that with the windows version (no tabbing, no lines drawing, no fibonacci, etc.). cTrader doesnt even exist there.
im looking to replace my macbook pro (which btw i also installed windows 8 on it through parallels virtual desktop) with a windows 8 tablet to support my trading while im outside
So basically I dont need a super i7 tablet or something. However, im curious to know how windows 8 atom tablets perform. I have seen enough reviews and some people says atom tablets perform badly in legacy apps. Question is, how bad is that bad? Does it lag so bad even though i dont need to run heavy apps like adobe? I only need to run these trading apps which btw are very light. You can compare them with MS paint i believe, just with constant connection.
would it do well in atom tablets? I dont want lags when i switch from win8 native apps to metatrader and cTrader.
next question - how does windows 8 tablet on-screen keyboard work with legacy apps? Would i have special gesture to show up the on-screen keyboard or it automatically appears when i touch the screen? I personally dont believe ... Read more

Answer:Help Me Choose My Tablet - Thinkpad Tablet 2, Vivotab, Acer W700, Etc.

I forgot to add one more question. how responsive legacy apps (desktop mode) is to your finger? Do i really need a pen or it doesnt help either? Because acer w700 doesnt come with a pen so it's also a crucial question for me

20 more replies
Relevance 38.54%

I have a desktop that runs Windows 8.1. My x220 tablet runs Windows 7. I was thinking about getting a wacom bamboo tablet for my art in photoshop (which I make on my desktop... x220 isn't powerful enough for what I do in photoshop). Then I realized that my x220 tablet is kind of the same thing. Is there anyway I can connect my tablet to my desktop so that when I'm using photoshop, I can use the stylus on the tablet to control what I do? Many thanks in advance.

Answer:Connecting x220 tablet to a desktop to use it like a wacom tablet with stylus

AFAIK, not easily:http://www.ersatzhaderach.com/blog/2013/02/02/turn-an-old-penabled-tablet-pc-into-a-networkable-art-...

2 more replies
Relevance 38.54%

The latest bios update of X1 Tablet (Model:20GG) breaks the sleep (or hibernation) function. I found the tablet sometimes cannot be waken up by pressing the power button after entering connected standby. The version of the flawed BIOS is1.68-1.21 (N1LUJ30W) After rolling the embedded controller version back to 1.20 (N1LUJ29W), the problem no longer exists.

More replies
Relevance 38.13%

So the DV port on my asus eee pc 1005peb is failing, and got the idea from android central to look into tablet and tablet hybrids. I kind of like the idea of having a hybrid for both the netbook kind of experience combined with a tablet experience. I'm having trouble discovering what my brands and model options are for that type of device. I'm concerned from what little I have seen so far I'm going to be against a cost prohibitive wall compared to spending $100 to have the port replaced. I'm one to figure if I'm going to toss that kind of cash into a repair I might as well consider replacing it with something else instead of doing the repair.
For my desktop PC I hesitant on going to windows 8 because of a lot of negative stuff I've heard but at the same time I hear good stuff about it too. But when it comes to a portable device like my netbook and a tablet. I think hm windows 8 (not RT) sounds like it would be a good fit since it is designed for both traditional mouse and keyboard input and touchscreen input. Plus I would like to retain the software I use on my netbook to use on whatever replaces it. Something I can't do with my current HP touchpad with webOS and android (CM9) on it. I tried using both as a replacement for my netbook but in the end there were just too many things I didn't like about that. I let my dad take my netbook out of town with him for about 2 month and was trying to use the touchpad as a replacement. I was glad to have my netbook back to use it again.
... Read more

Answer:shopping for netbook replacement with tablet or tablet hybrid

Sounds like you have a pretty good idea of what you are looking for. What would be the price range you are looking at?

6 more replies
Relevance 38.13%

The bay trail tablets come with office 2013 preinstalled, I cracked my asus t100 and wanted to move office to my new dell venue 11 pro core i3 version. I downloaded office and it got to the point where it needed to check if any other computers are using the license. So of course with it being activated on the asus it didn't let me. So is there anyway of deactivating it from the asus and transferring it to the dell or is the office version "special" that came with the bay trail tablets?

Answer:Possible to transfer microsoft office from bay trail tablet to new tablet?

Uninstall it on the T100?
Sent from my Z10 using Tapatalk

11 more replies
Relevance 38.13%

I have a wierd problem - I have six X61 Tablets, all with XP SP3.  One of them gets the BSOD on every boot during the XP Logo scroll.  This occurs on both its original drive and if I put in an HDD which works fine in another chassis.  Note that it will copy (clone) that disk fine if I follow normal protocol using Acronis True Image Home 2010 CD (on the ultrabase with either CD or DVD) - it clones USB drive to HDD fine, then that HDD works fine in another chassis, but gives the same BSOD when I try to run it in this chassis.  I am pulling my hair out trying to figure what is different, as I am unaware of any setup or BIOS changes.  Any ideas?  Could a bad CMOS battery cause this?  I have yet to try a new HDD setup from Lenovo disk set, but that is my next try.  I hoped to get insight here first, though.  Thanks in advance. Joe Holzer

Answer:X61 Tablet BSOD with XP SP3 using same drive that works fine in another X61 Tablet

hey ideaman911,let me get this straight ...X61 Tablet (Shoddy) + original HDD = BSODX61 Tablet (Good) + original HDD = PerfectX61 Tablet (Shoddy) + HDD (from X61 Tablet(Good)) = BSODX61 Tablet (Good) + HDD (from X61 Tablet (Shoddy) ) = ??is all the unit at bios version 1.25 ?





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

2 more replies
Relevance 38.13%

I have a new X220 Tablet, and the Pen and Tablet functions work perfectly out of the box as long as the unit is on the Ultrabase. As soon as I remove from the Ultrabase (or boot while not connected), the Pen & Tablet functions stop working. Conversely, if I dock the X220, the Pen & Tablet functions begin working again. The behavior is the same regardless of whether I have an external monitor attached or not. Any thoughts?

More replies
Relevance 38.13%

I'm new to the Tablet community but excited to venture into it.  My workplace provided me with an X201 Tablet type 2985 model C5U.  The pen works great but I can emulate any of the finger/touch demos.  Is this not supported with my type or model?  Or do I need a special driver.  When I open the tablet PC settings, I'm given the option to identify my screen as PEN or TOUCH.  While I select TOUCH, no finger combination (one or two) that presses my screen will invoke anything.  I was hoping this would be a touch solutoin albeit more powerful than the iPad.  Appreciate your responses everyone. Thank you. L

Answer:X201 Tablet Tablet MultiTouch Support (Newbie)

welcome to the forum!
 
the 2985-C5U model has a pen-only outdoor-viewable display.   it does not support touch input.

3 more replies
Relevance 38.13%

Hi people!, Im pretty sure this topic has been discussed before but im still having trouble making it work. When in tablet mode jabbing any of the buttons doesnt do anything, however when i switch back to normal laptop mode the buttons that i pressed start taking effect (screen rotate, tablet toolbox) . ive tried reinstalling windows and all the drivers i would be great to get this working again! Ive got a X61t with the following installed:-Windows 7-ISD tablet 7.1.0-9-Tablet button driver 4.04-tablet shortcut 6.33 any help is appreciated thanks!

Answer:tablet buttons dont work in tablet mode

download thinkvantage system update, it should load all the missing drivers for you.

2 more replies
Relevance 38.13%

Hi I have installed 64bit windows 7 on my machine quite recently in order to utilise the extra ram. When i rotate the screen clockwise to tablet mode, the screen will auto rotate to primary potrait by default and the buttons will work as usual. However, when i swivel my screen anti clockwise to tablet mode, the screen will NEVER auto orientate to primary potrait mode and all the tablet buttons will not work if i rotate the screen ANTI CLOCKWISE. Can anyone help me on this? Thanks alot in advance for the replies

Answer:X200 Tablet rotation and tablet buttons problem

I found another thread in another forum whereby another x200t user has the same problem. http://forum.tabletpcreview.com/showthread.php?t=22541 Hope someone can give advice regarding this. Thank you

2 more replies
Relevance 38.13%

Hey all, I have a weird problem.  My tablet buttons have stopped working-- but only in tablet mode.  That is, I can't rotate, or bring up the tablet shortcuts, or move around the screen in tablet mode.  Also autorotate doesn't work.  But if I switch out of tablet mode, I can do all of these things just fine (except for autorotate). Also, when I switch into tablet mode the screen doesnt rotate or anything, but when I switch out of tablet mode the screen rotates to the direction I defined in the settings (sometimes.. to be honest it seems pretty random to me).  I am running 32 bit vista w/ 4 gb ram on an x61 tablet with the latest drivers.  I have uninstalled the tablet button drivers and the lenovo system interface and reinstalled them already.. I have the latest APS. Help me out here.. I have no idea why this isn't working!  Don't make me have to reinstall vista to get the buttons working.. Tha'ts ridiculous!!  Arrrgh.

Answer:Tablet buttons stop working in tablet mode only

sano88 wrote:Also autorotate doesn't work.  But if I switch out of tablet mode, I can do all of these things just fine (except for autorotate).You haven't calibrated it yet and enabled it yet. You have to get into Tablet shortcut menu setting and do it all first. For the rest, uninstalled all ThinkPad Tablet Button Driver, ThinkPad Tablet shortcut menu then restar and reinstall vis System Update. Just let it find for you; that's the only thing I could recommend for this case.

8 more replies
Relevance 38.13%

hello all, i would like to set the three Tablet Buttons (the ones on the 'display' half of the notebook) to Shift, Ctrl and Alt, so i can use photoshop  also in 'tablet' mode of the notebook. the ctrl and alt keys were OK to set up, but it doesn't recognize the Shift key in the setup dialog. is there any known workaround?thanks for any reply.

Answer:x200 tablet & setting Shift to one of the Tablet Buttons

Try checking if the SHIFT key is actually one of the items on the drop down menu in the tablet pc button settings.





http://vanhavirta.fi/

2 more replies
Relevance 38.13%

Has anyone run into the problem where there is no audio on an X61 tablet even though SoundMax drivers are shown to be installed properly?  Any help would be appreciated. Thx

Answer:No audio on X61 tablet running Window XP Tablet Edition

I have the same issue right now on an X60 tablet that I just upgraded to Vista Ultimate.  All of my drivers are up to date, except it shows on windows update that I have an audio driver still to update.  I go through the process, and then it will not install the update.  I wish I could help with this more, but wanted to let you know that others have similar problems. I hope someone can help us.B 

1 more replies
Relevance 38.13%

I have upgraded my X201 Tablet to Windows 10 32bit. As far as I can tell, everything is working, including the WACOM drivers and touchscreen.  Wireless has worked perfectly so far, not sure about Bluetooth as I don't use it. My only issue is that the buttons on the display do not work. The power button located on the display does work. I tried installing the Tablet Button Driver II and it will go through the install but the buttons do not work.  This is the download link:http://support.lenovo.com/us/en/downloads/ds027627 The document claims Windows 10 compatability and was Last Updated :08 Jun 2015. On inspection, all the files extracted are dated from 2012 and when trying to manually run the software Windows throws up an error that the software is not supported on this PC.   I removed and reinstalled and noted that the driver information page when running the installer does NOT have Windows 10 listed as a supported system. My assumption is that the driver that they have linked on the download page is NOT the most current driver and is infact the driver for Windows 7 from 2012. Does anyone know how to contact Lenovo to get the correct driver posted to the page, or know of an alternate source to try and find it?

Answer:X201 Tablet Windows 10 Tablet buttons not working

hi, I can't help you with your question, sorry! Gooed to hear everything else is working fine on your system. Can you tell me what to do to get the x201 tablet's touchscreen to work!? I will have a clean windows 10 install. Where do i get the (right) drivers (windows, Wacom?) Thanx!Carlo

1 more replies
Relevance 38.13%

I have upgraded to Windows 8 64 bit on my X61 Tablet, however I cannot get the tablet buttons, hotkeys, or auto-rotation to work. My understanding is that Lenovo has stopped supporting these products. I think it is a shame to stop using a perfectly working tablet PC with a superior LCD. I don't want to go back to Win 7 leaving all kinds of nice features on Windows 8. Any suggestions? Is there a hope? Koray

Answer:X61 Tablet Windows 8 - Tablet Button and Features Request

Hi koray,
 
I've been playing around with Windows 8 since the developers preview.  I've ran it on a lot of older systems.  Getting things to work will require some experimentation on your part.  
 
You can start with your Driver Matrix.  There you can find the Hotkeys Utility for Windows 8.  You will also need the Power Manager Driver for Windows 8.  Not Power Manager,  just the Power Manager Driver.  
 
Run Windows Update, it will probably find some stuff.  Some Windows 7 drivers will work, others won't.  
 
I'm running Windows 8 Pro on an x60 tablet and everything works fine.  I also have it on an x61 non-tablet and it runs fine. I had to do a lot of messing around with stuff to get them to work right though. 
 
Just make sure that you set system restore points before changing anything so you can get back what you had before, just in case something doesn't work right.  And, only install one thing at a time and reboot and test it out thoroughly before you install something else.  
 
Good luck with this,
 
Dave 

1 more replies
Relevance 38.13%

I just bought my Yoga 2 13, when I flip it to Tablet mode, the screen turns off. Apparently it goes to sleep. When I open it it turns on again. Do I need to do any adjustments? or is this a defect?

Answer:Yoga 2 13 Tablet Screen turns off when in Tablet Mode

Try updating your drivers first: http://mobilesupport.lenovo.com/us/en/products/laptops-and-netbooks/yoga-series/yoga-2-13-notebook-l...If that does not help, try a factory reset:1. Turn off your Yoga 2 132. Press the tiny button next to the power button on the right3. Follow instructions to perform a factory resetIf none of the above attempts have helped you, it is probably a hardware issue.

1 more replies
Relevance 38.13%

Does anyone know if there is a program available (free if possible) similar to Quicken (Deluxe) that I could use on my Android Tablet(HP 10 Tablet G2 -2301)? That would keep track of bank accounts and interest earned, and keep track of one stock IRA and interest earned and yearly RMD? And produce reports for that interest earned, etc.? Mainly for using when preparing yearly tax forms.
 

Answer:Quicken alternative for Android Tablet(HP 10 Tablet G2 -2301

Have you looked at Mint.com?
 

2 more replies
Relevance 38.13%

Hi,
I'm going to be doing some presentations and teaching online. I'm using Team Viewer 9 running on Windows 7 as my software. I would like to be able to have the equivalent to a whiteboard visible to the participants.
For a demonstration of the sort of thing I want to do see
click here
where the presenter draws circles etc. He doesn't do any handwriting in the YouTube video (but he does in the actual presentation at CBT nuggets)
I'm total newbie when it comes to tablets, but a tablet that allows drawing direct on the tablet and simultaneous display on a Windows monitor. I know that the presentation on You Tube was done with various Wacom devices. Intuos4, Cintiq monitor, or more recently, Cintiq Companion tablet. (I tweeted the presenter Shawn Powers). These devices are a bit beyond my budget. Is there a cheaper alternative? Sadly the Microsoft Surface Pro 2 is not yest available in Australia (where I am) - I'm not sure if it's a possible answer, but I'm assuming it would be. Is there anything else that's not going to mean I have to take out a mortgage on my house?
Thanks in advance for your help.
cheers,
Bernard

Answer:Drawing on a tablet with simultaneous display on the tablet and a Windows PC

I assume you mean you want to use an app on a standard tablet such as a Nexus 7 or IPad and stream the tablet screen content to a monitor or TV?
Maybe something like this is needed

3 more replies
Relevance 38.13%

Hi I've looked at every category in the drivers matrix and absolutely cannot find the drivers that control the Tablet buttons on my tablet screen,  Can anyone point me to a link???  I found another thread on this forum that talks about a similar issue and someone posted a link to beta drivers, but the link doesn't go beyond the main Support home page at Lenovo.  Thanks, -G

Answer:X200 Thinkpad Tablet - Tablet buttons drivers NA???

Hey there Cr0sschex77,
 
To get some clarification to better direct you, what operating system are you currently using? Additionally are you referring to physical buttons or "buttons" on the touchscreen once at the desktop? Thanks Cr0sschex77!





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

1 more replies
Relevance 38.13%

plz help
i have lenovo thinkpad 2 tablet it was not running well so i decided to reset it ...
but after 1 hr,it says "WINDOWS INSTALLATION FAILED PLEASE RESTART THE INSTALLATION"
and it keeps on repeating the same thing...
please help me ....

Answer:PERFORMED TABLET RESET now UNABLE to START TABLET

If it is still under warranty, call Lenovo. IF you tried to reset to factory defaults, and it is still failing, then you have something else that is going bad. My suspicion would be memory as that is what happened to me although it was on a desktop. Something to check...good luck.

1 more replies
Relevance 38.13%
Relevance 38.13%

Hi all,    I have a really annoying problem...my x220 tablet disconnects from the internet whenever I enter tablet mode. The internet can be working perfectly fine while in non tablet mode but as soon as I switch to tablet mode, my internet disconnects. And if I switch back to non tablet mode from tablet mode, my internet returns almost instantaneously. I can load a page in non tablet mode with no problems, switch to tablet mode and the page stops loading. If I return back to non tablet mode the page resumes loading without so much as a pause or a hiccup. Also, when I switch the computer to tablet mode, wifi networks disappear off of the "available networks" list that were there before the switch.     I've tried everything, from updating network device drivers, reinstalling network device drivers, running diagnostics, reformatting my computer, uninstalling Norton Antivirus, system restoring to days before the last known working date in normal mode and safe mode, and contacting customer support (chat and call, managed to get a hold of a rep) but none of them have worked.    I also used to have a networking log before I reformatted/system reset to factory settings and there were a ton of errors with words like avsc manager failed to "something" ... I'll reinstall the thinkpad network managing program to create another log. Can someone please help me? My last resort is calling lenovo support again to have tech support come to hel... Read more

Answer:X220 Tablet Internet Tablet Mode Problem

hey kiul676,that's weird, could you check your bios is at 1.24. if it isnt go here and update : http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS018805





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

9 more replies
Relevance 38.13%

Well, I've finally had it. I've had my 6365 CTO X60 tablet pc for over a year now and last Monday I lost pen functionality in tablet pc mode in the afternoon after working fine in the morning. It works fine, even now after rotating the screen back to laptop mode. As soon as the screen is rotated back to tablet pc mode, no pen functionality but the mouse still works fine so I know it's functional in laptop mode but rotate back, all ok!  I did uninstall the Wacom drivers, restart, and then downloaded the tablet pc, windows xp version drivers from the wacom.com site as instructed in a previous post. Unfortunately, the digitizer pen is still disabled in tablet pc mode and works fine when rotated back to laptop mode. I've called Lenovo tech support in Atlanta four times now and they've been totally useless. I wiped out my X60 tablet last Friday and used Rescue and Recovery to reinstall the operating system back to it's factory settings. I went back and unistalled and reinstalled the Wacom driver. Nothing. Since that didn't work either I've requested the box to ship this back to the Memphis Depot. Hopefully, I'll just get a new replacement machine that works but I'm so angry and frustrated w/ Lenovo's support because it's obvious that the people on the phone are not tech specialists and they couldn't even point me in a direction to get this fixed. It's cost me over a week now wo... Read more

Answer:X60 tablet pc digitizer pen functionality disabled in tablet pc mode

Problem solved! While the support folks weren't able to fix the problem over the phone, they did overnite me a prepaid return box which I sent back that day. Two days later they overnited my X60 tablet back fixed with a note saying 'LCD enabled'. I'm impressed how quickly they got my tablet pc back up and running. I'm glad I got that 3-yr. support warranty because I usually opt out of those things. This totally paid for itself. I just wish I hadn't been so reluctant to send back my laptop because I do need it for work and I figured I wouldn't get it back for at least a week or longer. I was so frustrated and pessimistic that I forgot sometimes these problems do get fixed in a very satisfactory manner. It's too bad the initial steps that led to sending it back were so painful. Bottom line: Lenovo fixed my pc quickly, no questions asked. Thanks!

1 more replies
Relevance 38.13%

Hi, I have here a X220 Tablet that seem to have a FAN problem.Often in the last days my CPU temperature is often over 90 CAnd the fan has problem to reduce the temperature.I have also situation that the CPU is going too hot and the tablet switch off! With the CPU tool TPFC.62 I can see that the fan speed is 2300-2500 RPMs.But this seams not enough to be. And now the strange thing:When I disable the graphic adapter ?Intel(R) HD Graphics Family? (Driver 8.15.10.2321) and reboot and do the same thing that I done to get the temperature over 90 C with the intel graphic adapter the temperature is not going over 83 C!!! The fan speed is 3500-3800 RPMs. Can someone helps me with this issue?  

Answer:X220 Tablet FAN Problem - temperature over 90 °C - tablet switch off :(

Hi giciorek,
 
I understand that your fan/temperature problems can be frustrating.  I would try updating your BIOS and also updating Power Manager.  (Some on the forum have tried downloading ThinkPad Fan Control, but that is not an official Lenovo solution.)
 
Download Power Manager here:
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014924
 
Download BIOS Update here:
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS018805
 
In Power Manager, click Advanced at top right, you can Set Optimize Fan Control to Balance All Parameters under Battery Settings.  Set it to Reduce Noise Dynamically under AC.
 
Let me know if this helps.
 
 





Did you find a post awesome? A great response? Kudo them!Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a 'thank you' for helping you out!

2 more replies
Relevance 37.31%

Has anyone come across a problem with PEN input not being available at boot but becoming available when you disable and re-enable the HID component.  As soon as you shut the machine down and restart PEN input once again unavailable.  Windows event logs contains no error message in relation to hardware or drivers and none of the devices show and issues in device manager.Any help would be appreciated.

More replies
Relevance 37.31%

X61 Tablet what OS better&faster XP tablet  or Vista Business. RAM 4Gb.

Answer:X61 Tablet what OS better&faster XP tablet or Vista Business???

I can say that XP is simply faster, but Vista is just much better as far as Tablet functionality is concerned.

1 more replies
Relevance 37.31%

I downloaded the 'driver' on the gateway website:
http://support.gateway.com/support/d...&uid=263185599

after downloading & Extracting the file. a 'read-me' file pops up.

it reads:

=============================
Overview

This document describes the steps necessary to install the Tablet PC button drivers for the notebook computer models listed in the Applicable Part Numbers section below.
Installation

1. From the Start menu, right-click Computer, and then click Manage.

2. In the User Account Control dialog box, click Continue.

3. In the left pane, click Device Manager.

4. In Device Manager, click the plus sign (+) next to Human Interface Devices.

5. Click Tablet PC Buttons, and then from the Action menu, click Update Driver Software.

6. The Hardware Update Wizard displays. Click Browse my computer for driver software.

7. In the Update Driver Software dialog box, type or browse to the C:\Cabs\D20113-002-001 folder. Click Next.

8. Open the D20113-002-001 folder and confirm the selection of the qttabbtn.inf file. Click Open.

9. Follow all onscreen instructions to complete the installation.
=======================

I get stuck at step number 5.. I do not have a 'Tablet PC buttons'!! (this is the reason why I need to download it..).. it seems to me this 'driver download' is actually an update for the driver. and not the driver its self.?

I downloaded other drivers from them, for my computer and they all worked great.. they all had easy 'install... Read more

Answer:Gateway Tablet PC, I need the 'Tablet Buttons driver'

Brittni-

After opening the qttabbtn.inf file (installation script), I found these alternative names for "Tablet PC Buttons." Try finding one of these names in the Device Manager:
"Quanta Computer Inc."

"Quanta Computer Tablet PC Buttons HID Driver"

10 more replies
Relevance 37.31%

Hi, Happy New Year. I replaced my old harddrive with a new one and I just installed windows xp tablet 2005 (not supplied from lenovo or ibm) on the new HD. Now it seems that a lot of drivers are missing. Like bluetooth, keyboard, wireless... The drivers are available to download from ibm's website, But I have to install 20+ drivers one by one. That is too much. After installing xp, my windows desktop showed no icons except for recycle bin (I believe this is due to drivers missing also). Anybody know is there a x60 tablet driver bundle/package cd image somewhere? How did you guys change your os to xp on a new HD? Thanks!

Answer:Installing XP tablet 2005 to X60 Tablet new harddrive

Why not let System Update do the work for you? You will need to have installed the MS .NET Framework 2.0 beforehand, instructions can be found on the site, and then let it loose.

3 more replies
Relevance 37.31%

So I purchased my Tablet with XP Tablet OS downgrade (it was suppose to come with Vista, but I choose to have XP tablet instead). So my Laptop gets shipped in a speedy manner, I open the laptop up and there is a Vista sticker on it.  Luckily XP tablet  was installed on the laptop. However, on the bottom of my laptop is a Vista Business Product Key  . . .  Where is my XP Tablet 2003 product key? What if I wanted to do an OS refresh of XP Tablet without using the ThinkVantage software/bootup? What if my HD fails and I need to replace it? Does ThinkVantage offer to burn a cd/create an image or install of the Fresh XP OS install like Dell does? I know it offers to burn a recovery disk, but is that recovery disk just a restore point of the PC, or an actual OS installation. I really would like to be able to avoid the dependancy of ThinkVantage software on the hidden partition for restore and recovery. Also I guess whenever I'm ready to use Vista, how would I go about installing Vista? Is there another selection for creating a "Vista recovery disc"?Message Edited by tonefour on 08-26-2008 09:55 AM

Answer:X61 Tablet XP Tablet OS Product Key? OS refresh concerns!

I feel the same way as you. Last laptop crashed, and the recovery partition/MBR went too. The company wanted me to pay for recovery discs. I couldn't believe it. Anyway, I only have a partial answer for you unfortunately. I have Vista Business installed so you'll have to ask Lenovo about the XP part. I just spoke with Tech Support for though and they showed me where the option to Create Recovery Media was:Start-->All Programs-->ThinkVantage-->Create Recovery Media Follow the wizard and good luck, it worked for me.  We shall see if it actually works when the moment of truth comes. Best 

3 more replies
Relevance 37.31%

I just went about searching the web to find out if an X60/X61 Tablet pen fits in an X41 Tablet (as in, stores properly in the pen slot - it will definitely work on the X41 Tablet screen) and couldn't find the answer on any of the popular forums. So, I pinged some Lenovians to find the answer.





-----------------------------------Tim SupplesLenovo Social MediaGot a question? Don't PM me, post it on the forum!Lenovo BlogsX60 Tablet SXGA+ primary, Z61p fully loaded workhorse









Solved!

Go to Solution.

Answer:Does X60/X61 Tablet pen fit in X41 Tablet and vice versa? *SOLVED*

The answer is that the X41 Tablet pen fits in the X60/X61 Tablet slot, but the X60/X61 Tablet pen does not fit in the X41 Tablet slot. Now you know, and knowing is half the battle.





-----------------------------------Tim SupplesLenovo Social MediaGot a question? Don't PM me, post it on the forum!Lenovo BlogsX60 Tablet SXGA+ primary, Z61p fully loaded workhorse

1 more replies
Relevance 37.31%

Hi, I've just downgraded my X61 Tablet to Windows XP Tablet from Vista Busines. When i try to install Lenovo System Update i get the following error message"There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your personnel or package vendor. Action StartSuService.EXE, location: C:\Program Files\Lenovo\ ... \startsuservic.exe" Does anyone know what to do about this error? I have tried to:Add the "StartSuService.exe" file from another lenovo tablet, to the System Update directory, aswell as the installers cab files.Aswell as the obvious (rebooting, redownloading, and rerunning the installer). Thank you in advance,Mikkel

More replies
Relevance 37.31%

My X41 (1867-CTO) Tablet will not go into Tablet Mode.  Also ThinkVantage System Update has 2 updates that keep downloading and installing but just keep appearing.The stylus does not do anything either.













Solved!

Go to Solution.

Answer:Lenovo X41 Tablet - Tablet Mode Not working

You mean it doesn't change screen orientation when turn to tablet mode, right? If so, I have that problem too!! and no one helps us so far. http://forums.lenovo.com/lnv/board/message?board.id=X_Series_Tablet_ThinkPads&thread.id=4013

6 more replies
Relevance 37.31%

The learning curve on this machine is steep if you want to take advantage of all the input options but I've put the time in and I'm starting to love it. There is one thing I wish Lenovo would address though. I see plenty of ThinkPad users with this problem going back to at least 2008, and no solutions forthcoming. The manual states: "On the display bezel near the screen is a row of buttons with which you can control your computer in the tablet mode, without the use of the keyboard."By default the buttons are set to turn your computer off, press CTRL+ALT+DEL, or rotate the screen 90 degrees. The manual goes on to describe how you can customize these buttons via the Tablet Shorcut Menu, which is accessed via Start > Programs > Lenovo ThinkVantage Tools > Tablet Utility.If you open this program you get a dialog box titled "Auto Screen Rotation Settings." This dialog controls what orientation the screen should switch to when you convert into tablet. So it really doesn't have anything to do with the buttons.The only dialog that allows any assignment of the tablet buttons is Windows Control Panel > Tablet PC Settings. Here the Buttons tab is supposed to list the actual buttons on the front panel and let you assign them, but the only one shown is the Screen Rotation button. This works fine, you can set the button's function for a single press and a long press. (Too bad it's not possible to use Shift by itself, but that is as-designed by MS.)It should go without sayi... Read more

More replies
Relevance 36.08%

Hi allI need some help, the pen is working when i uses the X61 whwn the scereen is in the "normal position". But when i try to use it i tablett position don't work ??OS is WinThx for help 

More replies
Relevance 36.08%

Got a tablet PC, but we lost the original system disc that came with it. Can I simply put WinXP Pro on it or do I have to put Tablet Edition on it?
 

Answer:Tablet Edition required for Tablet

6 more replies