Computer Support Forum

my finger touch not working

Question: my finger touch not working

Hi guysi did buy a HP Elitebook 2740p and when i changed windows The finger touch system is not working, but The Pen does work. It did install the drivers, i did update the firmwareWhat can i do?plz help me

More replies
Relevance 100%
Preferred Solution: my finger touch not working

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 74.21%

Please help me my laptop hp 2740p touch not working pen touch is working good but no finger touch please help mei also goto device manager and there is no hid compilant touch screen drivers please any solution please post down thanks

More replies
Relevance 72.98%

Hi,

I have a Portege M780 and Windows 7 x64.

My laptop recognizes the pen and one point touch devices.

I can use the pen fine, no problem with this. But finger touch screen doesn?t work. I go to control panel and finger touch is activated.

I download Wacom dual touch drivers for W7x64 from Toshiba?s support web, but I can?t install it because when I try it says ? not supported platform ?.

Someone could help please?

Answer:Portege M780 finger touch not working

I download Wacom dual touch drivers for W7x64 from Toshiba?s support web



Where did you find this 64bit driver?
The Toshiba European driver page does not provide Dual touch driver for Win 7 64bit but only for Win 7 32bit

7 more replies
Relevance 72.16%

I have tried updated the drivers on lenovo's website to no avail. Im currently using win7 prof. I have also tried using the thinkpads system update software and it still does not work. When i go try and calibrate the screen both finger and pen have no response on the screen. I have checked the system device manager and there are no conflicts. Please help!

Answer:X201T 2985-F4U -- Both finger touch and pen not working on screen

Hi and welcome to the forum!

The tabook says your model has multitouch (i.e. both pen and finger touch). Is this a new system you bought? If so, did you buy directly from lenovo? Did the touch ever work?

Try to install the following driver:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-74908

If the driver installation doesn't help, subsequently try Windows Update, look particularly for Touch Input driver, if even that doesn't take you anywhere, then give factory restore a go (after backing up your data), to do so, press ThinkVantage button on boot to access Rescue and Recovery, and choose restore to factory contents in the following wizard. Note that factory restore is only available on lenovo preloaded OS.

Keep us posted.





------------------------------------------------------------Maliha (I don't work for lenovo)ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]IdeaPad: U350Apple:- Macbook Air [Snow Leopard]Did someone help you today? Compliment them with a Kudos!Was your question answered today? Mark it as an Accepted Solution!   Lenovo Deutsche Community     Lenovo Comunidad en Español Visit my YouTube Channel

2 more replies
Relevance 65.6%

Hello All - I just noticed that my multi-touch (not enhanced multi-touch) screen no longer responds to finger touch; just pen. It used to respond to both before i upgraded to Windows 7.I tried the Lenovo diagnostic check for the touch screen, and during the test, it only responded to the pen.What should I do? Is there a certain driver i'm missing or need to uninstall and then re-install?Thanks in advance.

Answer:Post Windows 7 Upgrade - Touch Panel Not Responding to Finger Touch (x200t)

Ok...I think i really screwed something up. As per a Lenovo support tech's advice, i installed the Windows 7 "Enhanced" Multi-touch Driver, even though i do not have the enhanced multi-touch screen, and this is what it says on Lenovo's site about this new driver: "*1: ThinkPad X200 Tablet models with the Multitouch are NOT supported." "*1: ThinkPad X200 Tablet models with the ENHANCED Multitouch ARE supported." So, i go ahead and install it. I notice that finger touch now works, but the pen setting are now all screwed up! The eraser no longer responds when i turn the pen around to erase. It actually INKS with the eraser as well! OneNote no longer automatically starts inking (or erasing) when i bring the pen (or eraser) into range. I have to manually click on the pen icon (or the eraser icon) on the tool bar to use these functionalities! *groan* In the Tablet PC Input Panel: no eraser functionality (it inks instead!!) and even the button on the pen (which previously had the right-click ability) only inks when pressed down! I think i made my situation worse...Please Help! Adam

2 more replies
Relevance 65.6%

I have ThinkPad X230 Tablet. It used to have non-functioning touch screen. I did something, and now the screen responds to pen input, but it doesn't work properly for finger touch. When I touch with finger, only thing it does is minimize or maximize window. When I change position of taskbar (with start menu and icons), it doesn't maximize/minimize.  I think this means that when I touch with finger, cursor clicks at bottom right corner of display, where there is button for maximize/minimize window

More replies
Relevance 62.73%

I bought my Flex 2 14 a couple of weeks back.I want to enable Two-finger tap (not click) for right click.. Unfortunately it does not work.Weirdly, Two-finger DOUBLE tap works for right click.. How do I get a two-finger tap? I tried the regitry hacks from here (https://forums.lenovo.com/t5/Yoga-Flex-Laptops-and/Yoga-2-Pro-Two-finger-tap-does-not-work/td-p/1406... but no luck yet. Any help please. 

More replies
Relevance 58.63%
Question: Touch w/finger

Can I used finger instead of pen on model # 744943u?

Answer:Touch w/finger

Probably. I have a 7448CTO that does. I don't think it's a multitouch, either. Should be the same hardware.

2 more replies
Relevance 58.63%

I've seen several posts on this but no working solution.  Can anyone point me towards a fix for the two finger tap on the Y50-70 Touch?

More replies
Relevance 58.63%

I was informed by an X41 tablet seller on e-bay that  he was unable to use the X41 tablet by touching the screen  with the finger. Is this true? Is there some magic  to get finger touch working ?thanks

Answer:finger touch on an X41

Hi netbeans, welcome to the forum, afaik, X4* tablets didn't have this capability. Depending on model X6* tablets do.So if you want to give your tablet "the finger" it had better be an X6* tablet.

3 more replies
Relevance 58.22%

Hello, I have a Thinkpad X61 (7762WFX) at work.  Then pen works fine, but I was under the impression that I should be able to interact with just my finger on the screen.  If this is indeed the case, how do I go about doing that.  I have updated the multitouch drivers to the newest. I am on Windows 7 Professional. Thanks! 

Answer:Finger Touch - x61 7762WFX

Hi rigwad and welcome to the community,
 
Some screens are pen only and some are pen and touch.
 
Go into control panel, system. About the middle of the page it will say pen and touch.  What does it say after that?  Does it say that you have pen and touch?
 
Dave 

9 more replies
Relevance 58.22%

Hello every bodyi just bought an X201 tablet pcX201 3113-CF8after a clean install of win 8 64bits the touch screen didn't worki got no pen with it and i counted on using one/mutlitouch finger.i almost installed all the available drivers and tested all available solutions but it still don't workcould someone please help methank you













Solved!

Go to Solution.

Answer:X201 no finger touch and no pen

Did finger touch ever work? It looks to me like this is a pen-only model

3 more replies
Relevance 58.22%

Hi, I'd like to disable the two finger touch on my elan touchpad because it's very annoying. How can i do? With the factory installed driver the ELAN setting program was not working, so I installed many different versions of the driver, but every time I change the settings in the ELAN setting program nothing changes.I own a Inspiron 15 7000 series 7559 with windows 10.Thanks for your help.

More replies
Relevance 58.22%

I just purchased a x41 tablet pc but it didn't come with the pen.  I bought a cheap pen made for a iphone off ebay will that work. I have tried using my fingers to select things as well. No luck! Is there a special pen that "has" to be used???Or is fingers or cheap pen acceptable. If you are able to use your fingers or cheap pen how do i set it up to work? I'm using windows 7. Thank you!

More replies
Relevance 57.4%
Answer:Stylus still works but finger touch does not after...

What model is the machine?

1 more replies
Relevance 57.4%

I am using windows journal a having problems that I can not turn off finger input when writing with a pen. The screen becomes insensitive to a finger when I am about an inch away from the screen with the pen, but this is not enough to avoid accidental dots and lines with your finger. Can one either configure the pen distance from the screen from which on finger touch is disabled? Or can one disable finger touch altogether? I have been following some discussions on forums providing some workarounds, but maybe there is a simpler solution around?138

More replies
Relevance 56.99%

Hello everybody, Just bought new x220 tablet (4294CTO), and tried to configure it to fit my needs. During the process I realized I'm not able to configure the touchscreen nor use it. The digi-pen works fine though, but finger touch does not function. I have check model description on Lenovo site it's said clearly Multi-touch 5 finger display, not outdoor, download all updates from Lenovo - no changes. What steps do I need to take in order to get this touch functionality up and running? Thank you in advance.

Answer:x220t - 4294CTO- no finger touch input

Same model and same problem with you after upgrade from win7 pro to ultimate. Wait for solutions

3 more replies
Relevance 56.99%

Hi, I'm new to the tablet and experiencing that even when I turn off the "Touch pointer" in control panel, the cursor is always above my finger about 1 inch.  This makes it is very hard to navigate and I cannot even open the Start menu at the bottom.How do I change this behavior? Thanks for your help!

More replies
Relevance 56.99%

I hope I'm not making a mistake, I have a 6364-BV2, I assume it's multitouch (as long as the pen works, should finger touch work as well?) and I'm not able to use my fingers to touch anything on the screen. It's the low-rez version... I tried installing the multitouch driver but for nothing... I have xp tablet edition... Is it possible that my tablet doesn't actually have multitouch (finger touch capability) and only the pen is supposed to work? Thanks

Answer:x60 multitouch issue: finger touch won't work

Not all screen are multitouch capable, the pen have a special proximty device that the sensors on a layer on top of the screen picks up, unless the screen also has an additional sensor sheet for your finger, it would not work with your finger... There are two types of screen option one is Multitouch and Non-multitouch in the XGA format, and SXGA format is definitely non multi-touch.  

8 more replies
Relevance 56.99%

Hello, It seems like I need to press very firmly on some items for the finger touch to work. How do I adjust to have less of a firm press?

More replies
Relevance 56.99%

I am in an IT department at a small clinic in Idaho.  We have several X220's and X230's here.   There are several machines that have issues with the touch screen just stopping.  Nothing with the pen/finger will work.  The mouse still works, but nothing with the pen. We created a script that restarts the TabletInputService, the docs would run this script when the pen stops working.  That script works a majority of the time, but not always.  One of our docs just received a brand new X230 Type 3435-2TU 2 weeks ago.  She pen has stopped working several times in that two weeks.  She said that script only works a few times.  She has to reboot for it to work again....so rebooting works.  We can't have docs rebooting 3-4 times a day. Does anyone know of a permanent fix for this? Please help!!Desperate IT Guy!!   

Answer:X230 Touch screen with Pen or Finger fails often

We just got 9 new x230's and some of them are doing the same thing. Did you ever get a resolution?

9 more replies
Relevance 56.99%

Hello!Unforutanley gestures like "forward" or "backward"(swiping with the finger to the left or right) to navigate one step back i.e. in the windows explorer or Firefox doesnt work.I can't get the gestures to work  If i try to learn the gestures (http://imgur.com/bPzQqGp ... Control Panel --> Pen and Fingerinput --> second Tab --> Hotlink, i will get the message:With the mouse button or with the finger it is not possible to perform gestures. Please use the tablet pen (translated from german to englisch).If I performs these gestures with the pen, it's possible. But it is so annoying....gestures with the pen arent very user friendly. Any tips?Thanks! 

Answer:No finger/touch gestures with x230t @ Windows 8

Hi, schlomm
 
What is the model number of your X230T? You should be able to find this information on the back of the system near the serial number. It should be in the format of XXXX-XXX, such as 3247-A2E.
 
Thanks in advance,
Adam 





______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

5 more replies
Relevance 56.99%

Hi, I have been baffled by this issue for quite a while now. I have a lenovo X220 tablet that supports both finger and pen inputs for touch. Originally this laptop came with windows 7 and everything was fine and dandy. I then bought windows 8/8.1 Pro 64-bit and did a clean installation of it. Now I only have pen support for the touchscreen, i.e. my finger is recognized as a pen/mouse not a finger which is really frustrating specially when scrolling. Now before I actually purchased the win8 license I had tried out the windows 8 release preview and everything worked perfectly then. So now when I got the actual release of the OS its not. Furthermore I currently have a dual-boot set up with windows 10 technical preview as my other OS and in there it also works perfectly fine as it should. This is important because when I contacted lenovo about the issue they suggested that my screen was broken, but clearly it is not.  Can anyone shed some light on this issue? It is a real shame not to be able to take advantage of this fine screen and windows 8 touch friendlyness.  Kind regards.

Answer:X220 Tablet pen support only no touch with finger

There is a firmware update for X220 tablet under win8 that improves didigitizer recognition.http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-tablet-laptops/think...

2 more replies
Relevance 56.99%

We received a new X201 Tablet, but it seems that the screen will only respond to the pen input.  It will not read any input fingers.  I haven't found a way to turn this on...would someone please point me in the correct direction?  Thanks













Solved!

Go to Solution.

Answer:New X201 3093-CTO will not respond to finger touch, only pen

Nevermind, I see wee have a superbright display instead of the multitouch.

1 more replies
Relevance 56.99%

Hi all ! I got a X220 Tablet from a friend and i am very happy with my tablet.The only question i have which makes me crazy and i cannot understand is that i have no touch capabliity only through wacom pen works.The same issue was with windows7 pro preinstalled and with windows8 upgrade i did after getting the laptop.Is it possible that my X220 Tablet has a panel that only works with wacom pen or i is it a software issue so i can resolve it by installing it and have the finger touch capability. Thanks in advance !!!













Solved!

Go to Solution.

Answer:X220 Tablet - No finger touch capability only pen :(

there are two types of X220t and X230t screens used one is both touch sensitive and uses pen digitiser, there is another one that is outdoor screen version that is only pen digitiser (so there is no finger touch capability).

2 more replies
Relevance 56.99%

hello, i have the x201 tablet 311396u and i cannot get the finger touch to work,  it says in system properties that i have pen and touch and in the control panel tablet settings it says it as well.  but when i go to calibrate the finger touch nothing happens...  i have even updated the driver through the lenovo site,, any thoughts??

Answer:lenovo x201 pen works but not finger touch

hey them0dster,could you uninstall the following :TrackPoint DriverUltraNav (Trackpoint + Touchpad) UltraNav UtilityOnce done, reinstall the above starting with the TrackPoint Driver first.http://www-307.ibm.com/pc/support/site.wss/MIGR-70656.html





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

4 more replies
Relevance 56.99%

Hello everybody, this is my first post on this forum, from my first lenovo PC, so I'm truly a newbie. Just picked up my brand new x220t from a local reseller, and tried to configure it to fit my needs. During the process I realized I'm not able to configure the touchscreen nor use it. The digi-pen works fine though. 1. I've checked under Control Panel | Pen & Touch Devices. This window should have 4 tabs (the last on the right should read Touch), but it ain't there as if some functionality was missing. 2. I also tried to turn the touch screen on/off via Simple Tap. It does inform me that I'm about to switch the touch screen off (and as a matter of fact I'm not able to use it wth my fingers) but when I turn it on again the touchscreen still doesn't react to my fingers. 3. I've downloaded all the win7 as well as lenovo updates via the update managers, installed them and did a complete restart of the system - still no touchscreen. 4. Under device Manager I tried to find Wacom  devices, but couldn't find any. (the touch screen is a Wacom, am I correct?) 5. In despair I even started reading the pdf manual where one can read:  "Some models have the touch panel feature". This left me a little bit uneasy. Do ALL x220 convertible tablets have finger sensitive touchscreens? I have read the sticky thread about conventional vs. multitouch lenovo tablets, and I gather that the answer should be yes - all have finger input besides digi-pen. ... Read more

Answer:x220t - NYK27PB - no finger touch input

The models with the outdoor screen (the one that has a reinforced gorilla glass surface) don't have multi-touch, only pen support. If your model doesn't have the outdoor screen then it should have multi-touch support, if that is the case perhaps you should contact tech support? It's possible that it's just a hardware problem and needs replacing.  Also, the pen digitiser uses Wacom technology, as far as I'm aware the multi-touch system doesn't.

6 more replies
Relevance 56.99%

I am a corporate user and just upgraded from an X61 tablet to an x200 tablet and are slowly exploring the new features. The specs as given to me are that this is a x200 7450 RZ1, but I can not find anywhere on the web what the exact specs are. So question is does this machine have finger touch and or WWAN on board. Finger touch did work for 2 minutes but will not return.  I have browsed the web but can only find a driver for Vista. Please help  

Answer:finger touch does not function on x200 under windows XP

Try this:Lenovo Fingerprint Software for Windows Vista 32 bit and XP 





ThinkPad X200s + LED | SL9400 | 4GB DDR3 1066 | 500GB Momentus XT | Intel 5350 WiMax | BT & FPR | 9-cell | Win7-x64 & Linux x64 | Ultrabase ThinkPad E10/Edge 11 | K325 | 2GB DDR3 1066 | 320GB 5400

3 more replies
Relevance 56.99%

The multi-touch screen is suppose to register 5 fingers right? Mine reports only 2 under the computer properties page in win 7. Is this normal, or do I have something wrong?   





-If this post was helpful maybe consider giving me a kudos for it.Thinkpad x230 -i5, 16gb RAM, 240gb SSD, 500gb 7.2k hdd, win 8.1 proThinkpad x220t - multi-touch, i7, 16gb RAM, 80gb SSD, 320gb 7.2k hdd, win 7 pro 64

Answer:Multi-touch screen finger count

multi-touch does not mean 5 fingers.  It depends on the hardware.  In the case of X220, multi-touch means 2 fingers.

4 more replies
Relevance 56.17%

I have an x201 tablet and often use the pen with One Note. With Windows 10, it is impossible to lift the pen the slightest bit off the tablet without reactivating finger sensitivity. The result is that I get a bunch of scribbles from my hand touching the screen, and also inadvertantly hit other tabs etc while trying to write.Any suggestions?

More replies
Relevance 56.17%

Hello,Recently my brother bought a refurbished x230t type 3437-XE1.Spec: windows 7, processor i7, 8gb ram. Since I tried it today, I was never able to get the finger touch to work (no tablet touch screen function at all), but  the stylus pen seems to work perfectly.Also, the simple tap gesture (double clicking with two fingers on the pad) doesnt seem to work.I dont know whether some settings are not correct or the refurbished product has its faults. Please assist me in how to solve the problems.thank you. 

Answer:x230 tablet finger touch doesnt work since I got it.

leevshan wrote:Hello,Recently my brother bought a refurbished x230t type 3437-XE1.Spec: windows 7, processor i7, 8gb ram. Since I tried it today, I was never able to get the finger touch to work (no tablet touch screen function at all), but  the stylus pen seems to work perfectly.Also, the simple tap gesture (double clicking with two fingers on the pad) doesnt seem to work.I dont know whether some settings are not correct or the refurbished product has its faults. Please assist me in how to solve the problems.thank you. The Gorilla Glass model of the X230t does not offer touch.

2 more replies
Relevance 56.17%

Hi I finally decided to upgrade my 4 year old Ideapad Y550 and I am quite happy with my U310 so far. One thing I would like to change though, I've gotten used to one-finger scrolling using my Y550 and I would like to have that back. Is there any way in the U310 to chage to one-finger scrolling from two-finger scrolling? Thanks!













Solved!

Go to Solution.

Answer:Ideapad U310 Touch single finger scrolling

This is based on the Elan touchpad. Do you think the one finger scrolling is similar to the edge swipe? Maybe its not enable. Two or more finger scrolling is under multifinger configuration menu. But there is no scrolling option in One finger menu but only the edge swipe option.

9 more replies
Relevance 56.17%

Hi all,
I'm currently operating with a Dell Latitude (E6410) running Windows 7 32-bit. I have the default Alps touchpad built-in, and was recently ecstatic to find the driver for multi-touch on the Dell Support page, something I figured I'd never get privileged to since this doesn't have a Synaptics touchpad.
Everything works as it;s supposed to, as far as the options go under the Dell Pointing Devices menu. However, I noticed that two-finger options are missing, specifically a two-finger right click. This is odd, seeing as there are plenty of other two-finger options, and since two-finger right click has become a standard with multi-touch touchpads.
So my question is, is there anything I can do to get two-finger right click? I don't see any options officially provided by Dell, so I'm totally okay with installing software or drivers from somewhere else, as long as they work. I haven't been able to find anything myself, as it seems every driver and software in the world is developed with Synaptics in mind.

Answer:Two-Finger Right Click with Dell Multi-touch Touchpad?

I have the exact same question. I see that this was posted 3 years ago without a solution / reply :(

2 more replies
Relevance 56.17%

How can I do, Eventhough I try to in stall ISD Driver or anything else. Anyone can give me the recommendation?

Answer:Please help I just unpacked X220t but the Finger Touch Function is not work

did you get a X220t with Multitouch?

5 more replies
Relevance 56.17%

Upgraded simple pass soft ware and since then says that the finger print reader not connected though on start up the finger print reader does flash but if I swipe my finger over it just stops. it doesn't flash at any other time than start up. Gone into device manager and up dated reader driver for it but made no difference also in device manger is says it's operating ok.  Help please?

More replies
Relevance 56.17%

My finger print reader failed and a Lenovo support tech installed a new replacement. Now my PC won't start from the finger print reader although it works fine after I hit the start button.  I have had a few calls with the telephone service people and no one is able to address this problem.













Solved!

Go to Solution.

Answer:Can't start X1 Carbon touch from finger print reader

Hi Lebouitz,
 
Welcome to Lenovo Community Forums!
 
I?m really sorry to hear that you are not able to start your Lenovo X1 carbon Touch using the fingerprint reader.
 
I would suggest you to try the following steps.
 
To enable power-on passwords replacement:

Login as administrator.
Start Fingerprint Software.
Click Settings.
Click Authentication.
Check Always show power-on Security Option if power-on passwords are not set.
Check Use fingerprint scan instead of power-on and hard drive passwords.
Check enable single sign-on capability if you want to boot from power-on to windows without further fingerprint swipe or passwords.

 
Spoiler (Highlight to read)
 
To enable power-on replacement for fingerprint swipe:

Start Fingerprint Software.
Authenticate with password or enrolled fingerprint.
Click the Power-on slot on the top of the enrolled fingerprint.
Close Fingerprint settings and shutdown system.
On the first reboot you will be asked for your password and fingerprints. The second time you reboot it will only require your fingerprint.

Spoiler (Highlight to read)
 
For further information regarding fingerprint reader, refer the below link.
 

Fingerprint Reader tips

Let me know how this goes!
 
Best Regards,
Mithun.
 





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! ... Read more

3 more replies
Relevance 56.17%

I ordered my x200 tablet on cyber monday nov 30th, but i am not sure is my screen multitouch like iphone or not. Estimated shipping date was dec 8th, but has been delayed to dec16 In my order, monitor spec :44C5631  SBB 12.1WVSBRLEDWXGALCDPPLEDCF Can anyone tell me if this is multi touch screen? if not, can i ask them to correct my order to multitouch?  Thanks for your help in advance  Max

Answer:Is my x200 tablelet multitouch screen (two finger touch?)

Just got mine with the same part number 44C5631 ... NOT HAPPY.    And I'm afraid you won't be either. No you don't have ENHANCED MultiTouchAs a matter of fact, you don't even have MultiTouch. Much to my dismay, this part number is for a DIGITIZER-ONLY screen. ARGH!!!!   I talked to sales endlessly to get this right when I ordered ... and they STILL send me the wrong one.  It's like they do it on purpose ;-) .... Unreal.

5 more replies
Relevance 56.17%

Few issues that have popped up in the last few days after some Windows updates 1) Two finger scrolling stopped working2) Touchpad will randomly stop/start working, as in I can't even move the cursor. When I restart the machine the two finger scroll will work then stop somewhat randomly

Answer:u430 - 2 finger scrolling and other touch issues on Win10

Dear ldevine,
 
Welcome in lenovo community,
 
Please try to uninstall the touchpad driver from the device manager, and install the below one please.
 
https://download.lenovo.com/consumer/mobiles/0vu102af.exe
 
Regards,
Joseph

1 more replies
Relevance 55.76%

My 7840's touch pad "One Finger Scrolling" functionality has become inconsistent.  It had been working fine by using the 'DellTPad.exe' application and selecting (if memory serves) 'one finger gestures'.  That option is now gone however one finger scrolling still works for awhile, and then fails and the only option to scroll using two fingers. A reboot fixes it for awhile then it starts all over again.  This problem coincided with a recent round of updates, though the touch-pad driver was not one of those updates. 
Any ideas out there?

More replies
Relevance 55.76%

I HAVE A X200 TABLET 7449-9EU IM TRYING TO FIND OUT IF THIS MODEL IS FINGER TOUCH COMPATIBLE IF SOMEONE CAN POINT ME IN THE RIGHT DIRECTION I WOULD BE GRATEFUL.

Answer:X200 tablet how can I find out which models are finger touch compatible

Well I would say that the most empiric way to do it is just try to touch your screen on some dialog boxes or pictures where gestures would trigger a reaction from the computer..... Indeed it's not very easy to figure it out from Lenovo support website ... I tried the product number but this only gave back basic characteristics of the machine, not the exact type of display/screen  I know mine is wacom enabled and (finger) touch compatible and I think I figured this out by... trying  http://shop.lenovo.com/us/landing_pages/multitouch_technology

2 more replies
Relevance 55.76%

I'm befuddled. Two finger scrolling in Windows 10 dialogs, applications and Internet Explorer/Edge all works perfectly. However, Chrome is far too sensitive and the page blazes past. I can't adjust the scroll speed in settings because that affects all other apps (in other words they'll become way too slow!) Just to make matters more confused I've also got a Logitech mouse and the scroll wheel works fine everywhere - and this means if I install an extension in Chrome to configure scroll speed to work with the touchpad I will have slowed it down to a painful rate using the scroll wheel. Any clues how to configure Chrome two finger scrolling correctly? Is this an issue with the trackpad or Chrome?

More replies
Relevance 55.76%

Hello. I have a Lenovo Yoga 2 from work and we use it to get customer signiture on a web browser page for the company I work for. however lately. when a customer is trying to sign in the signniture box, it just move the whole screen around in a similar way to moving the screen with your finger. the only way it writes is when you hold the stylus down for a scond or two and then write without lifting it. but every time it leaves the screen then the same problem happens again. I tried to fix it from the touch screen settings but nothing seems to work. and advice on fixing this is greatly appreciated.

More replies
Relevance 55.76%

Just 2 days ago, a Lenovo staff on chat said that the X220 Tablet with Outdoor Display supports touch inputs but only for single finger actions.  He was very sure but then several posts on this forum seem to indicate that it has only the pen input. Can someone please confirm? 2. If the Outdoor model supports single finger input, is the display capacitive touch? 3. On the Multi-touch model, will the 2-finger scrollling, 5-finger gestures, etc. work in every application or is it application dependent? Thanks much for your help.  

Answer:Lenovo staff says Outdoor Display is one-finger touch activated

I have the Outdoor as of yesterday, and it is not a touch screen.  It is Pen input only.  Can't speak for the multitouch models. Cheers,Gigs

2 more replies
Relevance 55.76%

Hi guys I have not been able to use the touch screen functions for about a month now.  the pen works fine ,  but the finger touch go nuts after a few minuts. in theose few minets the screen start to missed up ,  and the touch finger do what ever he wants on the screen  you can see a lot of finger touching everywhere. what can be the problem? do i need to replace the screen? or it's driver problem?.. Any suggestions please. Thank you in advance! Dan.

More replies
Relevance 55.76%

How can I turn off mini scrollbar when scroll using two finger in synaptics touch pad? It is very irritating even when I finished scrolling and want to move cursor to another place, it sposmadically continue scrolling  frequently.

More replies
Relevance 55.76%

cant seem to find out how to turn off the 2 finger touchpad zoom option

Answer:touch pad 2 finger zoom option on my laptop is driving me nuts!

Search "Mouse" in start menu, after the dialog window opened, go to the right most tab.

2 more replies
Relevance 54.94%

i guys im new in the form. i ve got a lenovo x201 tablet.im wondering about the multi touch option.Does x201 tablet 3113-94U support multi touch or only pen. And also i coudnt find my model type in lenovo.thats kind of weird Thanks for everything

Answer:lenovo x201 tablet 3113-94U support multi touch??(pen & finger)

Hi, btoymus23
 
I did some research on your machine and found its entry in the Personal Systems Reference. Machine type 3113-94U does not support MultiTouch, unfortunately. This information can be found in the link on page CML3-4 (use Ctrl+F to find it faster.)
 
MultiTouch, however, means to be able to use three distinct points on a touchscreen at once, not being able to use different touch inputs. I think you should be able to use your fingers to touch objects on the screen, though the pen might be easier.
 
Hope it helps,
Adam





______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

2 more replies
Relevance 54.94%

Hello every bodyI just bought an x201 tablet pcX201 3093-bf8After a clean install of win 7 64bits the touch screen didn't workI got no pen with it and i counted on using one/mutlitouch finger.I almost installed all the available drivers and tested all available solutions but it still don't workCould someone please help meThank you 

Answer:lenovo x201 tablet 3093-bf8 support multi touch??(pen & finger)

3093-bf8 does not appear in the tabook reference so it was probably a custom build. Most X201 tablets do not support finger touch, but you can find the screen FRU by entering your serial number here: http://support.lenovo.com/en_US/product-and-parts/partsLookup.page

2 more replies
Relevance 52.89%

Hello,
I recently purchased an XPS 15 9560, Windows 10 and am having the trackpad dead zone issue (the pointer does not move until I move my finger about 1/4"at which point it has perfect response / tracking / precision). Each time I start to move the pointer using the trackpad I must go through the dead zone prior to the pointer responding normally. The dead zone appears to be a circle around the spot that I touch the trackpad.
When I disable the HID trackpad device in device manager, this dead zone problem is eliminated. Is there a way to access the trackpad driver registry settings to see if there is something I can change that will eliminate the dead zone?
Alternatively, is there a way to find out which trackpad brand I have that will allow me to try a different driver? I tried the Synaptics fix but I was not happy with the two finger scroll performance even after changing the registry settings.
Thank you,
Joe

More replies
Relevance 51.25%

My Ideapad P400 Touch with Windows 8 is no longer responding to right side swipe (charms bar gesture).  All other touch screen functions and gestures still work normally, including the left side swipe to switch apps.  The screen still displays the 'touch feedback' dots when I attempt the gesture but no charms bar appears! I've tried recalibrating as well as removing calibration of touch screen, and tried various other troubleshooting procedures I found on this site, like uninstalling recent updates, etc... Finally I tried running Windows 8 PC refresh, which worked as it's supposed to so I got to reinstall all my software but didn't fix the missing charms bar! Has anyone had a similar problem with the touch screen right-side swipe and been able to fix it?  Any help would be greatly appreciated!   Thanks!cait 

Answer:P400 Touch - swipe gestures (on touch screen) stopped working

ccd8 wrote:My Ideapad P400 Touch with Windows 8 is no longer responding to right side swipe (charms bar gesture).  All other touch screen functions and gestures still work normally, including the left side swipe to switch apps.  The screen still displays the 'touch feedback' dots when I attempt the gesture but no charms bar appears! I've tried recalibrating as well as removing calibration of touch screen, and tried various other troubleshooting procedures I found on this site, like uninstalling recent updates, etc... Finally I tried running Windows 8 PC refresh, which worked as it's supposed to so I got to reinstall all my software but didn't fix the missing charms bar! Has anyone had a similar problem with the touch screen right-side swipe and been able to fix it?  Any help would be greatly appreciated!   Thanks!cait If you use an external mouse and move the pointer to the right will the charms bar appear?

9 more replies
Relevance 50.84%

Drivers all show working properly. Not intermittent. Tried settings and no help. No response when touching screen at all. Can't calibrate. Bios has no update available. Nothing in manual under troubleshooting. Any quick fix suggestions have likely been tried, but open to all ideas. If all else fails, and assuming the digitizer is bad, what does repair entail and any rough estimate?Is there any recall? I see this issue on the forum a lot with not many folks getting it resolved.TIA!!

Answer:U310 IdeaPad Touch :The Touch Screen Stopped Working. No Previous Posts Have Helped.

hi c2nah777,
 
Welcome to Lenovo Community Forums!
 
Have you tried booting the system in Recovery Mode (One Key Recovery), You're not going to Recover the system since your only going to check the touchscreen in that mode "Outside Windows"
 
See if the touhcscreen works there,
If Yes, I would suggest doing a factory Reset First Before jumping into a hardware Repair.
If No, Then I think you're correct with the digitizer.
 
Regards
Solid Cruver





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

3 more replies
Relevance 50.84%

My touchpad is not functioning properly. It suddenly would not allow right click function, and i no longer can scroll up and down. I have tried updating and restarting , it still has not worked. Also the right hand side of the touchpad seems stiff, it is not clicking as it used to. Please help, as i have no one hear or in my visinity who knows how to fix lenovo laptops.

More replies
Relevance 50.84%

My Ideapad S415 touch screen has suddenly stopped working.  I've had a tech connect to my PC and try a BIOS reload of default settings, plus unistalling all "HID" devices in Device Manager with no resolution.  I've also tried a system restore with no luck. The system properties does see the touch capability. Suggestions? Thanks.










Solved!
Go to Solution.

Answer:Ideapad S415 Touch - touch screen stopped working

hi Hersh,
 
Welcome to Lenovo Community Forums!
 
First do a Power Drain 
     (If the battery is removable)
            Remove AC and Battery and hold the power button down for 15 sec.
               Turn the computer back on and see if the Touch capability is now detected under System Properties,
                  If not
         I suggest you contact Lenovo Technical Team about the Issue as this may be a device detection issue.
       Lenovo Technical Team
 
Regards
Solid Cruver



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Relevance 50.84%

I have a friends laptop that the synaptic touchpad gets extremely hot and PC doesn't reconize it. Vista 32 home basic, have downloaded drivers and to no avail. doesn't even recognize a mouse plugged into a USB.
 

Answer:Dell Inspiron 1525 hot to touch not working synaptic touch

6 more replies
Relevance 50.84%

Ok, so I got my Yoga 2 Pro 5 days ago. It was been working great until today. I turned it on and I noticed that the on screen volume indicator was active and at 100%. I pushed and held the volume down button and the indicator went down but as soon as I let it go, it goes all the way back up to 100% volume as if a ghost is making it happen. The volume indicator will not disappear. So I thought that maybe I did something wrong. I restarted the computer and nothing changed. Here is what else I've noticed: Volume indicator stays on all the time and will not disappearOn screen touch keyboard is inoperable, comes up but goes down immediately.Touchpad is unresponsive and swipe gestures don't work on the touchpad.The on screen start button (on the windows taskbar) doesn't work. Is not clickable.When I open apps, they open minimized and start blinking orange on the taskbar.In my office documents, when I right click, menu immediately disappearsI uninstalled and reinstalled the audio and touchpad drivers. Didn't work. It seems that something is either being depressed or is hungup or conflicting. I can't figure out what it is. I haven't tried much else, so I don't know if other features aren't working.  This is driving me crazy. Any help would be greatly appreciated. Thanks. 













Solved!

Go to Solution.

Answer:Yoga 2 Pro Problem - Volume, Touch, Touch Keyboard, not working

Ok, so I've completely reinstalled Windows and I still have the same issues. I guess I have a lemon. Going to bring this back and get a replacement.

3 more replies
Relevance 50.84%

I've lost the use of my keyboard, but not the touch pad. Restarting and converting to table mode and back doesn't correct the issue. Thoughts? I'm not sur where to go from here. Could the keyboard be physically dead?

Answer:Yoga 2 Keyboard not working, but touch pad and touch screen fine

You should test the keyboard in the BIOS menu and see whether it works. 1) Press on the recovery button (next to the power button, you may need a small screwdriver). https://www.flickr.com/photos/lead_org/11617761143/in/set-721576390073780542) Then there is an option menu for entering recovery, bios, etc. https://www.flickr.com/photos/lead_org/14512183979/in/set-72157639007378054Use your keyboard and see whether it works in that option menu. If it doesn't work then it is a faulty keyboard.

1 more replies
Relevance 50.84%

I have the IdeaPad S510p touch, which seems to have a similar problem as other Lenovo models where the touch screen seems to stop working intermittently.  It seems to stop working after a while or after it has been sleeping.  It starts working again randomly.  I tried downloading a driver for a different model, but it didn't load or allow me to open it.  I just got this computer a few days ago.  I'm not sure if it is better just to take it back to the store, but I am concerned that this problem will exist even if I exchange it for a new one...

Answer:Touch Screen intermittently working (IdeaPad S510p touch)

Hello... I have an ideapad S510p, about 4 months old. Today, the touch screen stopped working. In the middle of using an app and using the touch screen. I searched all through settings and can't find anywhere to adjust its settings or anything. And in fact I saw that this computer "Has no touch/pen screen", which it does. Or it did until about an hour ago. I am relatively clueless but i'm learning. And would like some instruction/options. ThanksJohnpal716

2 more replies
Relevance 50.84%

My laptop automatically updated in Sept./Oct. It took about an hour and had multiple restarts, so I am assuming it was a Windows 10 update. I am not 100% sure though. Afterwards, the touch screen doesn't work. My laptop automatically updated in Sept./Oct. It took about an hour and had multiple restarts, so I am assuming it was a Windows 10 update. I am not 100% sure though. Afterwards, the touch screen doesn't work. I can tap the screen and it will select stuff but I cannot scroll or anything else. Anyone able to help with this? It is drving me bonkers.

More replies
Relevance 50.84%

Hi, My G400s series touch screen laptop touch not working. It stops working just one month back. It was purchased around 16 months back. I have done all the trick which suggested on the forum by many users but all in vain. I have always updated with latest updates by Microsoft including Window 8.1/latest driver by Lenovo but I think this is not the issue with Windows upgrade because this was done months back and touch was working perfectly. If this is hardware problem the Lenovo should accept the fault and change the failure part free of cost or come up with some solution because many Lenovo users suffering with this problem. Kindly some one can suggest me where I should approach to get this rectify?

Answer:Lenovo 400s touch screen laptop touch not working

Hi Surinder,
 
Welcome to Lenovo Community!
 
As per the query we understood that you are facing issue with touch screen not working in your G400s laptop.
 
Please confirm is the display appears on the screen; also check if the touch screen is damaged.
 
Also try to reinstall the display driver and touchpad driver to the latest version and check for the issue.
 
Click here for the display driver for windows 8.1
 
Click here for the touchpad driver for windows 8.1.
 
Hope this helps. Do post back if issue persists!
 
Best regards,       
 
Ashwin.S





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

3 more replies
Relevance 50.43%

The touchscreen stopped working suddenly on my Envy TouchSmart Sleekbook 4-1115dx. At first i though it was like a normal failure and that will get fixed by turning the pc off or restarting so I did not pay attention to it until now that I had restart my pc multiple times. Currently running win10. I started to believe it was because of an update a few days ago since it was when the problem started but all drivers and everything is up to date. I have checked for the HID-compliant Touch Screen driver and had to  show hidden divices in order to find it. I cannot enable it and when i check in the properties the following message displays: "Currently, this hardware device is not connected to the computer. (Code 45)To fix this problem, reconnect this hardware device to the computer." I have no idea on how to connect or how it got disconnected. I come from a similar thread but did not solve my problem. I have been researching this for hours and have not found and answer. Help please! 

More replies
Relevance 50.43%

Hello everyone, my touch screen on my lenovo ideapad z400 touch is not working anymore.  The only weird thing I remember is some ghost touchpoint on my screen. I've been looking for the answer to this issue, but it seems that Lenovo does not address this problem.  If someone has found the solution to this problem and wants to share it with me, I will be forever grateful.  

Answer:IdeaPad z400 Touch - Touch screen not working

I facing the same situation right now. any solution please. left side of monitor is being "touched"?

1 more replies
Relevance 50.43%

Hi there, sorry to be a bother.Like the title says, my touch screen stopped working. I went on to my computer one afternoon and found my mouse stuck in the top left corner, fidgeting. This was what I was expiriencing. (My touch-screen still worked fine at the time, but I still couldn't do anything or control the mouse, but I could tell that it was still working and it still responded.) After a bit of time and a few restarts later, it went back to normal, but my touch-screen then stopped working. I'm used to the touch-screen working incorrectly occasionally, and much like the mouse thing, a restart or two helps.It has now been three days and my touchs-creen still does not work. I've tried many of the solutions found in these forums, but to no avail. I am running Windows 10 and have had this computer for 2+ years.  Thanks.

More replies
Relevance 50.43%

My X220 tablet comes with pen and limited touch support with 2 touch points. I have no issues on windows 7 but on windows 8.1 it has changed to be working with only 1 touch point since some time that I don't remember exactly when. So that I can work with one finger only and 2-finger functions such as pinch to zoom are unavailable. My drivers are all uptodate. I think I should completely uninstall the related driver before reinstalling but don't know how to procede and couldn't find the solution. I tried uninstalling all HIDs through Device manager and one-by-one, specifically wacom device. when I uninstall it, I lose touch option completely. but reinstalling through Device Manager sounds like recovering exactly the previous faulty condition. Maybe there is a conflict with windows 8.1 like Microsoft Input Configuration Device which might be unlikely.  So is there any other way to have full wipe and clean reinstall of those touch screen drivers? I appreciate it if you put links to the drivers for me, if they are not available on Lenovo Support. Tell me if you had the same touch issue in Windows 8.1  and how you solved it. Thanks 

























Device manager.JPG ?72 KB

More replies
Relevance 50.43%

Not only are "pen and touch" no longer in my control panel, HID-compliant touch screen is not in my device manager.  Needless to say, my touch screen is non-responsive.
I have a Compaq Elite 8300.
I had problems before but everything was working 24 hours ago and I didn't make any changes since then. 

More replies
Relevance 50.43%

I have a Lenovo s400 and the Touch screen is not functioning.  The details highlighted in the blog also describe exactly what happened to my computer - I updated to Windows 8.1, it worked intermittantly for a week and would cease to work after the computer slept for a brief time, then there were ghost taps in the top corners that were inceasant, then it no longer functioned at all.  The online support staff attempted all of the software updates to no avail.  I am looking for any type of help to resolve this problem.
 
1/28/15 EDIT: This post was moved to the top of the discussion for escalation purposes. Amy_Lenovo













Solved!

Go to Solution.

Answer:Re: S400 Touch - Touch Screen stops working

Hello, I decided to post it as I cannot find a solution been trying to find a solution for 3days, but to no avail.. My laptop's touch screen function stopped working last saturday, i don't really know what the problem is,Here's what I tried to check/do based on the touch screen problems here in the forums HID Touch Screen -> Installed properlyHID Service -> Set to automatically start-upPhysically - Perfectly taken care of, no drops since bought.Tried to revert back to windows 8 -> did no goodUpgraded back to window 8.1 -> did no betterThere is no wacom touch gesture(w510 solution) to uninstallHardware problem? -> no idea. hopefully not the cause.Windows 8.1 issue? -> not sure but i have been able to use touch gestures for windows 8.1 since it was released until last saturday

9 more replies
Relevance 50.02%

Hi, I have enabled the 2-finger "right click" feature from synaptics, but it does not work. My laptop is up to date.

More replies
Relevance 50.02%

Hello,this afternoon, the two-fingers tap function on my y50-70 stopped working (i'm with windows 10 for a few weeks now). The regular tap, the two finger scroll, three-fingers and four-fingers functions all function alright. The two-fingers function is the only one not working. I tried updating the driver but it didn't solve the problem, nor did resetting the driver's configuration. I also tried rebooting of course, to no avail. Mapping the two-fingers function to something other than right-click did not work either.Edit: the dynamic icon does display two fingers when they are on the touchpad.I did not install anything new on the computer, I simply stopped working. Please help, thanks.

More replies
Relevance 49.61%

I've tried re-installing drivers, etc.  In system I see "no pen or touch input available for this display".  Touch worked fine until a month ago.  Any ideas?

Answer:Z500 Touch - touch screen not working

Hi metryc,
Welcome to Lenovo Community Forums!
 
Try Booting into the Recovery Environment.
     (From an OFF state, Press the One key Recovery Button)
Select Recovery.   We are not going to continue the Recovery, Just the Environment.
 
Once you saw your Mouse pointer, Try your touchscreen.
If that did not work there as well.
I suggest you call Lenovo Technical Team.
http://support.lenovo.com/us/en/supportphonelist_alt1
 
Cheers!
Solid Cruver





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 49.61%

For some reason the touchscreen stopped working. Tried to install updates, but it didn't resolve it. System says "no pen or touch input is available for this display"Anyone can help me resolve this?

Answer:Touch Screen not working on U330 touch

Hi NCBM,
 
Welcome to Lenovo Community!
                 
As per the query we understood that you are facing issue with touch screen not working in your U330 laptop.
 
Please connect the external monitor and check for the issue, try to reinstall the drivers and check for the issue.
 
Also try to boot the system to safe mode and check for the issue.
 
Do post us back if the issue still persists.
 
 Best Regards
 
Ashwin.S





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 49.61%

Hello, good evening, I have had an off-and-on issue with my trackpad not working. Sometimes it works, sometimes it doesn't. One moment it will work, the next, it doesn't. I have been bearing with it for months now (plugging in a usb mouse when it won't work for an extended period of time). Today, I stopped working during a timed test (I am a college student), and took 5 minutes to get it to work again. Valuable, precious time that could have meant the difference between an A and the D I ended up with (just kidding that low grade had to do with a refusal to study, but it could have been the cursor refusing to move!). Key points:I know this is not an issue with the function (fn) buttons. Tried that.I don't think it's drivers, because it works sometimes.The pad has been crooked since I got it (eg.: the left side is almost higher than the area around it, while the right side is sunken 2mm below the same area. The back appears to be even on both sides.) Any ideas?

Answer:Ideapad U310 touch touch pad not working

hi meagaletr,
 
Welcome to the Forums.
 
Your issue might be similar to this thread.
 
When the touchpad doesn't work, can you check if the touchpad system icon detects that you're still putting pressure on the pad as shown below:
 

 
If you get the same scenario then it's possible that the touchpad is malfunctioning (possibly grounded) and you may need to contact lenovo for service.
 
 
Regards

1 more replies
Relevance 49.61%

I just did a fresh install of Windows 10 on this HP Stream notebook.  Now the touch pad quit working.  And when I go into Device Manager to try and fix it and update the driver for the touch pad, there is not even that option.  Touch pad does not exist in the section for mouse and pointing devices.  Only the generic mouse I am using now appears. How can I fix this?Thank you!

Answer:Touch pad quit working. Touch pad does not show up in the l...

Yes, you have to install the Intel chipset drivers from hp.com for the touchpad to work after a fresh install on the Stream notebooks. Run the driver execuatable files, don't try to update it from Device Manager.

1 more replies
Relevance 49.61%

I'm not sure this question is in the right forum but I've been searching for a solution all over the site with no luck. My C440 Touch isn't responding to touch.  I'm running Windows 8.1 64 bit.  I tried using the calibration screen but it wouldn't register my touch. I checked the drivers and everything seems to be up to date.  I regualrly update the computer when prompted. A lot of time I don't use the touch and I use the mouse.  Would there be some setting that would disable the touch capabilities?  I went to the Pen and Touch settings in the Control Panel and tried to adjust the setting but it wouldn't register the touch on the test images. I've run out of possible fixes, please help!  

More replies
Relevance 49.61%

A month ago or so, my touch screen stopped working.  I have not updated or downloaded or changed anything.  Running Windows 8.  When I go into my control panel - system - pen and touch, it says "No pen or touch input is available for this display."   It's worked perfectly the past year, what's up with it now?  

Answer:Touch screen not working on P500 Touch

Hi Jaacka,
                         
Welcome to Lenovo forums
 
As I understood that you are facing the issue with touch screen not working on your Lenovo P500 laptop.
 
Try to boot the system in safe mode and check for the issue.
 
Also try to update the touch drivers.
 
Click here to download the driver.
 
Hope this helps! Do post us back for further queries.
 
Best regards,    
 
Ashwin.S





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 49.61%

The "touch" ability of hte C540 is not working.  Recently upgraded to Win 8.1.  Are there new Human interface drivers for Win 8.1 for this maching?  What can be done?













Solved!

Go to Solution.

Answer:C540 Touch, Touch Functionality not working

Good day and welcome to the community.
 
While I'm not sure of which drivers you'd need, have a look at the support pages for your machine:
http://support.lenovo.com/us/en/products/desktops-and-all-in-ones/lenovo-c-series-all-in-ones/lenovo...
The available drivers will be linked there, along with a wealth of additional supporting materials.
 
Hope this helps.
Regards.

3 more replies
Relevance 49.2%

For some reason the mousepad's two finger scrolling and two finger tap for right click doesn't work for my HP laptop in the signature.


At least the scrolling didn't work just earlier today but I see the two finger tap for right click is still not working

Answer:two finger tap for right click is not working for my HP

under mouse then the hardware tab select the trackpad then it should show settings with a synaptics logo on it and if you click that you should get all the settings to set those gestures up.

1 more replies
Relevance 49.2%

This is a new laptop and I can't get the two finger scroll option to work.  I've even reset the laptop, but that didn't resolve the issue.   Thank you!

More replies
Relevance 49.2%

I've tried both uninstalling/reinstalling the synaptics driver and changing the 2FingerTapAction value under regefit to "2" but neither works. Changing the value makes the click work once but then it no longer works after that. Help!

More replies
Relevance 49.2%

I have been using the Validity Sensor for more than a year now, but in the last few days, it doesn't work, and the light doesn't turn on when I swipe.I've tried checking for updates for the sensor and even downloading the link that Provost, an HP Expert Volunteer posted on:  http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/Validity-Sensors-WBF-PID-0050-USB-VID-1... I have no clue to why it would suddenly stop, any help? 

More replies
Relevance 49.2%

I dont know how to start finger print.. and which hp simple pass to download help me with all possible solutions.

Answer:Finger sensor not working

Hello, You can refer to the documents listed for how to enroll, register, install, manage Simple pass.http://support.hp.com/us-en/document/c02518653 After the steps, you can try the below documents to start using the fingerprint reader. http://support.hp.com/us-en/document/c01988283 http://support.hp.com/us-en/document/c02519007 Hope this help!Have a great day!    Click the Thumbs UP (Like) on the left to say 'Thanks'****Make it easier for other people to find solutions, by marking my answer ?Accept as Solution?&"Thumbs up "if it solves your problem.****  





I am an HP employee.

1 more replies
Relevance 49.2%

So I have been trying to be able to use two fingers to right click.  I have updated my mouse driver and even checked on the mouse options to make sure it is checked but it still wont work.  I have been trying all morning to look up solutions and nothing seems to work.  I have a Lenovo Yoga 710.  Just got it about a week ago.  Any help would be appreciated! Thanks

More replies
Relevance 49.2%

I have just read through a Yoga 13 issue where the two finger tap/right clich menu function has been fixed and I'm wanting this function the the UltraNav touchpad. How to I get a two finger single tap (not click) right click menu function happening on the X1 Carbon? Cheers

Answer:two finger tap right click not working X1

Punt

5 more replies
Relevance 49.2%

 Dear All,After updating to windows 10 (Auto update from windows - Online) the Validity Fingerprint Sensor  just stopped working. and windows hello not showing in the settings already tried many (maybe all) of the suggested solutions posted on this forum. (uninstalling and install driver and HP samplepass app) and resetting the laptop not help.below pic from device manager for your reference Many thanks in advance for your time and advice.Mohamed 

More replies
Relevance 49.2%

brightness,finger sensor,key board button 3,e,d,c are not working.

More replies
Relevance 49.2%

Is anyone having a problem with two-finger tap to right click?  Two-finger tap to right click was working fine for a while, but it suddenly stopped on my Yoga 13. I reinstalled the touchpad drivers, and it worked for a few days, then it stopped again.  Two-finger click still works fine.  So does one-finger tap to left click. Strange....











Solved!
Go to Solution.

Answer:two finger tap right click not working

Driver crashed, execute: C:\Program Files\Synaptics\SynTP\SynTPEnh.exe




------------------------------------------------------------------------How to get BIOS version: Windows key + R --> cmd --> wmic bios get smbiosbiosversion

9 more replies
Relevance 49.2%

Yoga 2 11 64-bit, Two-Finger tap not working. I have been reading about this in several forums, but have not yet found a resolution. Seems quite odd to release a new item and not have an appropriate driver. Any thoughts? Thanks,Jeff 

Answer:Yoga 2 11 64-bit Two-Finger tap not working

Hello Lenovo...... can you please respond with a solution?

9 more replies
Relevance 49.2%

I have a X61 tablet that does not allow my to use my finger for touchscreen just the digitizer pen. I am not sure if it is a setting or the computer. Does anyone know how to set it up for both finger and pen input?

Answer:X61 touchscreen not working with finger

Tengo el mismo problema, solo funciona con el lápiz. Mi Tablet es X61  7763-54S con Vista 32 bits.
 
I have the same problem, only works with the stylus. My X61 Tablet 7763-54S is with Vista 32 bits.
 
Moderator edit: Added English. Please use a translate tool as English is the common language of this community!

3 more replies
Relevance 49.2%

Hi, i have a problem with the touchpad // Synaptics drivers.When I first unboxed the pc every gesture worked flawlessly. After a shut down and restart, every gesture still works (including 3 finger tap to wake cortana) but the 3 finger flick to open multitasking menu is not working.

More replies
Relevance 49.2%

I just got my thinkpad edge 14 a few days ago.  I cant get the finger scan to work during windows log in.... al that comes up is the password screan.  I have registered a finger print, and have selected the "Use fingerprint scan insted of password when logging into windows" box, but it still doesnt work.  Im not sure what to do.  Please help. nikk

Answer:Finger Scan Not Working On Log-in

At the login screen click switch user and see if the fingerprint icon pops up.

1 more replies
Relevance 48.79%

Hello, suddenly my two finger and tree finger functions stopped working. I?ve tried to uninstall the drivers and install the new ones, I?ve tried to go to mouse options to see if there was anything that could not be selected but nothing changed. What can i do more?

Thanks.

Here are my pc specs:
Nome do modelo SATELLITE L50-C
Refer?ncia PSKWSE-04Y02FEP
N?mero de S?rie 8F054443C
Vers?o do sistema operativo Microsoft Windows 10 Home 10.0.15063
Vers?o do BIOS 5.30

More replies
Relevance 48.79%

I have had my laptop for about 6 months now and am generally happy with it. However, the two finger scroll has stopped working (it was working fine when I got it and for a while after). I know it's not essential, but it makes such a difference for the work I end up having to do, which often involves copying and pasting etc, and I really miss it!

I've read many threads saying that you should go to Control Panel, click on Mouse and go to device settings. However when I get to that point, my Mouse box just says "buttons; pointers; pointer options; hardware" and there is no "device settings" panel along the top. What can I do? I also can't find the synaptics driver anywhere to uninstall it, as some other people have suggested.

Answer:Satellite C50-B-14D - Two finger scroll is not working

Can you please post full model name of your notebook so we can check Toshiba download page and try to find right touchpad driver.

3 more replies