Computer Support Forum

Turn off top touch panel

Question: Turn off top touch panel

Over the keyboard there is a touch panel with sound settings and wi-fi turn on/turn off. Sound settings are stuck (so minus or plus is blinking) and everything hangs. Could I do something with that or just turn off this panel? How could I turn it off?Thank you!

More replies
Relevance 100%
Preferred Solution: Turn off top touch panel

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 67.24%

I am one of the early adopter that bought the crappy 1080p touch TN panel. Now seeing that the 4k touch panel is superior, I would like my screen to be replaced.The question is , would the 4k touch panel physically fit the frame the came with 1080p panel (direct subtitute)? 4k replacement touch panel is not available for sale right now but maybe in a year or so when it is popular I will definitely consider doing that.Thanks.

Answer:Is it possible to upgrade IdeaPad Y50 1080p touch screen panel with 4k touch panel ?

Still, anyone from Lenovo know about this ?

1 more replies
Relevance 59.04%

Hello All - I just noticed that my multi-touch (not enhanced multi-touch) screen no longer responds to finger touch; just pen. It used to respond to both before i upgraded to Windows 7.I tried the Lenovo diagnostic check for the touch screen, and during the test, it only responded to the pen.What should I do? Is there a certain driver i'm missing or need to uninstall and then re-install?Thanks in advance.

Answer:Post Windows 7 Upgrade - Touch Panel Not Responding to Finger Touch (x200t)

Ok...I think i really screwed something up. As per a Lenovo support tech's advice, i installed the Windows 7 "Enhanced" Multi-touch Driver, even though i do not have the enhanced multi-touch screen, and this is what it says on Lenovo's site about this new driver: "*1: ThinkPad X200 Tablet models with the Multitouch are NOT supported." "*1: ThinkPad X200 Tablet models with the ENHANCED Multitouch ARE supported." So, i go ahead and install it. I notice that finger touch now works, but the pen setting are now all screwed up! The eraser no longer responds when i turn the pen around to erase. It actually INKS with the eraser as well! OneNote no longer automatically starts inking (or erasing) when i bring the pen (or eraser) into range. I have to manually click on the pen icon (or the eraser icon) on the tool bar to use these functionalities! *groan* In the Tablet PC Input Panel: no eraser functionality (it inks instead!!) and even the button on the pen (which previously had the right-click ability) only inks when pressed down! I think i made my situation worse...Please Help! Adam

2 more replies
Relevance 59.04%

Hello, I have the TOSHIBA Satellite U400. Everything is going great but I have a few concerns.

1. The Touch Panel (Media Buttons on top of keyboard -mute-media-play/pause-stop-rewind-forward-) turn
the computer ON if touched! How do you stop that from happening? I only need to use the POWER button.
Power button is enough.

2. The MUTE button on the Touch Panel does not actually "mute" or "unmute" sound. Instead, all it does
is turn the White Glow Light for the entire Touch Panel ON and OFF (including the word "SATELLITE").
How do I make it do its proper function?

3. When logging into Windows, I get to choose between Password or FACE RECOGNITION. How do I
set it to FACE RECOGNITION only without having to choose it?



Thank you,

SAL : )

Answer:Satellite U400 - Issues with touch panel, touch and media buttons

It seems like there may be a problem with the buttons, I would send the system to an ASP for repair.

2 more replies
Relevance 58.63%

Hi, I need a little help.  I assigned the user defined touch key (2nd from the left) to an application and now I would like to change it to another application.  For the life of me I cannot seem to figure out how, after intially assigning this button, to change it.  My model: Y530-40512QU Thanks in advance,Kevin













Solved!

Go to Solution.

Answer:Y530 Touch Panel - Change User Defined Touch Key

Look in tra for Icon named "User Defined Button" and right-click it





//help will save the world

8 more replies
Relevance 58.63%

Hi Does someone have pinout of connector (white, about 10 pins) which is comming from LCD of laptop U310 Touch LCDand connecting camera and touch screen panel? Actualy this are 2 USB prts, buth I need pinout on motherboard or connector itself. BR Tomaz

Answer:Pinout of camera and touch panel cable of U310 Touch LCD

Really nobody have any idea where to get this pinout? People from Lenovo?Does somebody have broken U310 Touch LCD panel and would share it with me?

1 more replies
Relevance 58.63%

Dear Guyz... I am using X200 - 7450 WPR, with single touch display.Is it possible to change my LCD panel with a multi touch display panel ? please help me in this !!!!!1

Answer:Multi touch LCD panel on single touch X200 tablet

I don't know the X200, but you can try the multitouch driver: http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-67220

8 more replies
Relevance 54.53%

Hi... lenovo gave me a replace computer... y70-70  According to them, the laptop is a new one and not a rebuilt one... Since the first day I picked it up and used it at home... When I turn it on, starts a pitched noise and it ends when I turn the laptop off. That sound is so annoying to work I can´t work more than one hour due to the annoying noise/sound...   That sound does not come from the speakers... What can I do? what is the problem? I need a quick response because I am travelling to another country in few days and I won´t come back until 6 months before. Regards

Answer:lenovo y70-70 touch pitched sound when I turn on and ends when I turn off

Diian wrote:Hi... lenovo gave me a replace computer... y70-70  According to them, the laptop is a new one and not a rebuilt one... Since the first day I picked it up and used it at home... When I turn it on, starts a pitched noise and it ends when I turn the laptop off. That sound is so annoying to work I can´t work more than one hour due to the annoying noise/sound...   That sound does not come from the speakers... What can I do? what is the problem? I need a quick response because I am travelling to another country in few days and I won´t come back until 6 months before. RegardsIf the unit is still under warrantee you can return it or request for repair. This is a peer to peer forum. Only Lenovo staff can decide for return, repair, etc. So better make a call to them.

5 more replies
Relevance 52.48%

I am brand new to this forum and received a new X1 Carbon Touch a few weeks ago. Is it possible to turn off the touch screen functionality (in anticipation of my 2.5 year old jumping onto my lap and poking at the screen). Thank you













Solved!

Go to Solution.

Answer:Is it possible to turn off touch on an X1 carbon touch?

Hello auroria, Welcome to the forums! If you are using Windows 8 or 7, you can disable the screen touch functionality by navigating to: Control Panel -> Hardware and Sound -> Pen and Touch. Next, click touch tab and disable "Use your finger as an input". Hope this helps, -Brian Chan





My Thinkpads: T42 (GPU failure), T60, W530W530: Windows 7 Pro | i7-3720qm | FHD screen | 256gb Samsung 840 Pro SSD | 500GB Ultrabay HDD | 16gb Crucial RAM | Nvidia K1000m

2 more replies
Relevance 50.43%

HiThis is my first post in this forum  so I'd like to take the opportunity to say hello to everyoneHere is my problem:  I have brought from  ebay  an x60 tablet  6364-AH6 for £110 pound which has a broken screen, thus, the cheep price..     I need to buy a second-hand screen and I have found this  HT12X21-351 screen but I can't find any details about it. The seller told me that it come from an x60 but he couldn't tell me if it is multi-touch or if it work just with the pen. Does anybody know?? Thank you very much in advance for your help.

Answer:HT12X21-351 touch panel

http://www-307.ibm.com/pc/support/site.wss/MIGR-67024.html#xga+ it looks like that screen is pen only.  here's your parts list. looks like it came with 3 different screens.  you want the part numbers for the digitizer with touch.  the other 2 don't have touch.  

1 more replies
Relevance 50.43%

I have cracked my touch panel on my s10-3t. Lenovo have said its not covered as it was my fault which is fair enough. So im looking to find out about the screen/touch panel Are they separate? What do i need to replace? How much am i looking at? any help will be greatly appreciated. cheers

Answer:S10-3T Touch panel cracked . . . HELP!!!

Call Lenovo again and tell them that you want to replace it. They will tell you how much it is.





IPnaSh First Spanish Community Guru - Colaborador ad honorem

2 more replies
Relevance 50.43%

i have installed windows 7 and i am not able to use Touch inductive panel. i dont what the matter is i only saw this working properly when vista was installed on it and since i have removed vista it has stopped working. i installed windows 7 again so that if there would be some problem in the windows but i am facing the same problem.kindly help me out













Solved!

Go to Solution.

Answer:Touch inductive panel

i am using ideapad y 450

2 more replies
Relevance 50.43%

hi everyone.. i got my new s10-3t 2 weeks ago but unfortunately i cracked the touch screen.. the LCD itself is working fine.. any advice other than taking it to support? (local lenovo service center couldn't help out)













Solved!

Go to Solution.

Answer:S10-3t cracked touch panel

Hi and welcome...
You broken that touch panel by an accident... thats bad luck.. but in that case , you have to pay for that..
 let it send in for repair at your own cost.. ask your local service center... or buy a new one , sell the broken one...
 
 
sincerely KalvinKlein

6 more replies
Relevance 50.43%

Can any one help me knw which part is called the touch panel????.
My lumia 925 screen has cracked but the touch and screen under the crack is all fine and working normal. Which part do i have to change ??? just a screen will do ??? i have searched online and most of them say Touch panel so pls help me understand what is a touch panel also if possible approximate price of one.

Answer:What is a touch panel of Lumia 925

There is no touch panel in nokia Lumia.

4 more replies
Relevance 50.43%

I just got my new laptop and I think the button for "Open Dolby function setup screen" might be broken, as nothing happens when i press it. The other "Inductive Panel buttons" work fine. I was wondering if there was a way I could access the "Dolby function setup screen" manually, without the use of the inductive panel button? Also, this is the U110 model downgraded to Windows XP. Message Edited by kevl510 on 02-03-2009 11:02 AM

Answer:Touch Inductive Panel

Thus far, there has been little [if any] success in keeping Dolby functionality after downgrading any IdeaPad to XP.





\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

2 more replies
Relevance 50.02%

I've seen this on other laptops before, but I'm surprised to see such a basic design error on what I presumed would be a well designed laptop.  After only a couple of months use, I'm starting to see light marks on the lcd where the edges of keys have been touching the panel when the lid is closed.  No doubt this will continue to get worse untill the panel look a complete mess.  Not impressed.  All it takes to stop this is correctly sized rubber bumpers, another 0.5mm would probably have done it.....

More replies
Relevance 50.02%

So I have a hp pavilion dv6-1361sb and had it for about 4-5 years. Recently I have had a problem with my laptop that I hope you guys can help me with. My Touch Sensitive Panel (Wifi, Mute and Volume Control) are not working. It seems like that it has been disable or something. I tried doing the plugging out the battery and doing a dry-startup thing. It did not work. I also formatted the hard drive and reinstalled the windows. It seem to help for a little bit until windows does an update and disable it. any thoughts Thanks?

Answer:dv6-1361sb Touch Sensitive Panel

Hello and welcome cedeic now what did you install Windows with?? Did you do a factory default or slip in a new OEM or retail version?

Now you could do mate is to do a system restore and then set the updates to what I have in my pic and load the updates in batches until the one that is causing problems shows itself that means another system restore to just before it was installed and when it comes up just right click on it and "Hide" that update then carry on updating.

3 more replies
Relevance 50.02%

Seems many people with touch screens are finding what worked with the developer version have been ripped out for the Consumer Preview. Why did they do this? I contacted Planar the maker of my touchscreen and they said Microsoft removed the Control Panel for touch screen devices and they are not sure why.

More replies
Relevance 50.02%

I cannot change the default graphics processor using the NVida Control Panel.  I always get an Access Denied error message when trying to apply my changes.

Answer:Y70-70 Touch Nvida Control Panel

Dear rdbishop
 
Welcome in lenovo community
 
Is this machine is controlled by a domain user and need for admin account ? if not so you will need to reinstall the graphic driver with the updated one 
 
Just let me know so i can send you the updated driver .
 
Thanks
Alaa





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 50.02%

I bought a Y510 a couple of weeks ago and the touch inductive panel did not work. I sent it back for repair on a wednesday and friday I had it back and the buttons work. amazing. but what are the jazz, pop, dance etc. buttons supose to do?, I push them and a box opens on the lower right side of my screen and tells me what I pushed and thats it. I do have music in the media player.

Answer:Y510 touch inductive panel

Basically, they are EQ presets.





Beer... It does a body good!

2 more replies
Relevance 50.02%

I just received my new M90z.  Everything but the touch screen works.  I tried everything that I could think of.  Flashed the bios, installed the latest Simpletap, downloaded and installed the latest "Lenovo touch driver & TouchControl Setup(version 2.00.012") I also tried running the touch screen test included in the diagnostics toolbox. Nothing.    My touchscreen is senseless :-(     Any hint ?  Will I have to return it ?  Should I attempt to open it to see if they forgot to hook the touch screen connector ?  Thanks anyone. My model is a M90Z , 0870-CTO Francois  - UPDATE - Jan 10th - Got it working !   One of the touch screen cable was not even close to being connected !   So, no RMA this time for Lenovo, but someone certainly should inform their QE that they had a "field fail" and I'd like to know what type of inspection that they perform at the end of their assembly line (%  and AOQL plan)   I'll update tonight with the serial # and lot # to help them investigate. Have a great day !

Answer:M90z Touch panel not working - out of the box

Great work, thanks for updating us!





------------------------------------------------------------Maliha (I don't work for lenovo)ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]IdeaPad: U350Apple:- Macbook Air [Snow Leopard]Did someone help you today? Compliment them with a Kudos!Was your question answered today? Mark it as an Accepted Solution!   Lenovo Deutsche Community     Lenovo Comunidad en Español Visit my YouTube Channel

6 more replies
Relevance 50.02%

Hello:

The IT guy at my Church recently quit. He basically set up all the computers, projectors and LCD televisions himself. He linked all the functionality of these devices into a single laptop. When you log-on to the desktop you see different groups of icons that control different things in the Church. So, in the projector-icon group, you can hit the "screen on" icon, and it lowers the screen. When you hit the "screen off" icon it raises it. He also programmed the PC to control stuff like lighting in the room.

So, basically, this laptop is similar to a touch-panel interface that you would find at a conference center. All the functionality of the room is patched into the PC, so that you don't have to put on the lights manually or lower the screen manually.

The problem is that my Church wants too purchase a new laptop which is more powerful. Unfortunately, we have no idea how to duplicate the touch-screen functionality that our previous IT guy programmed. The laptop we want to replace may be a "proxy laptop" that is connected to another one. I don't know.

I was wondering if anyone had any ideas...

Answer:Programming a PC for touch panel capability

I would backup/image that laptop immediately in case something happen to it

As long as you can install the same programs on the new laptop, I don't see any reason not to get the same functionality. You may have to experiment a lot and copy files across, do some registry export and merges though.

I am not sure if I can be more descriptive as it all depends on the software used.

4 more replies
Relevance 50.02%

My touch screen clicks itself into the middle of the screen, uset to go into a HP window within the control panel to disable it but since upgrading to windows 7 (thinking it might solve it) the window has gone and now the beeps are driving me insane.

My computer is the IQ700 and I've upgraded from Vista home 32 bit to 7 home 32 bit.
 

More replies
Relevance 50.02%

I was wondering if there was a way to change the function of the touch panel at the top of the keyboard. Whenever I press play it opens WMP 11 and I am using zune software so I would prefer if it didn't do that. Is there a way to change the function of that button. Also is there any way of changing the stuff that is displayed on the screen of the Gaming Zone area. Like is there an applet that I could use to see song title and artist or something like that.

More replies
Relevance 50.02%

Hi,

Can i add a multi touch panel to my MSI GE60-0ND laptop?
It has got a 15,6 inch monitor @1920x1080, powered by Intel Graphics HD 4000 + Nvidia GeForce GTX 660M.

Answer:add touch panel to a GE60-0ND laptop

Hello Nik,

Yes, but you would most likely need to install the touch drivers for it.

8 more replies
Relevance 49.2%

I have a Y530 and was wondering how you can change the what the touch keys open.  I looked up a thread about it on itunes, but is there anything i can do so the play/pause button opens up Winamp? Also, it turns out that the Fn+F1 function key to put the laptop into sleep mode doesn't work after I downgraded to XP.  In fact, nothing really works in the Energy Management in choosing what the laptop does when the lid is shut, pressed power button, etc. Any solutions? Thanks in advance. -Chris

Answer:How do you change the functions on the touch panel - Y530

HawkeyeKid, Do not have a response for you there is a long thread which I saw here to switch it to iTunes, see this thread; http://forums.lenovo.com/lnv/board/message?board.id=ideaPad&thread.id=6076 However like you I am looking for a simpler solution with a pointer to winamp. I am sure there is a software setting somewhere. Phil88   Message Edited by phil88 on 01-19-2009 06:28 PM

1 more replies
Relevance 49.2%

Myself and others have been on a mission to find a stylus that works with this 2 in 1 and so far not having a lot of luck.  The squishy tip stylus I had for my phone doesn't work.  One of those somewhat new metal stylus with the little round disk on the end works great on my phone but not on the inspiron with or without a screen protector.  I had a motorola active stylus with a battery that someone suggested, it only works intermiittingly but I guess the fact that it works at all should give me some hope.  What are the specs for the touch screen on the 3135?  I have read that a heavy cover like glass can affect whether stylus work or not as well as screen protectors.  I've found a couple of stylus that claim to have adjustable power output so they should work through screen protectors and glass coverings.  Gosin universal digital pen, overdrive adjustable and navitech are all supposed to be active stylus that have two power settings.  I've asked in the faq but no one can say if it works on the inspiron and the manufacturer says they haven't tested it either.  While I hate spending 30 bucks on anything like this without knowing 100 percent that it will work, I ordered one of the navitech off amazon because I will be able to return it if I want to.  I have poured over everything I can find about this machine but nowhere does anyone give any details on the touch screen.  I know this isn't intended to be a... Read more

Answer:What are the specs for an inspiron 11 3000 touch panel?

The screen is exactly that - a multi-point touch panel.  It does not have the digitizer that's required for use with an active stylus.  
This is not a matter of there being a layer over the screen - there is, but it's not why your stylus isn't working.  Basically, a stylus that works will do anything your finger can do - and no more.  
What you're looking for requires a digitizer.  If you're looking for that in a small system, you need to look at something like a Surface Pro 4 or equivalent from another manufacturer.
 

1 more replies
Relevance 49.2%

Hi all.  I just received my U330, removed all the bloatware, installed all the updated drivers, etc.  Everything seems to be working fine except for the touch sensitive panel and one of the Fn keys.  The Fn+F5 no longer brings up the option to disable the wireless and Bluetooth.  On the touch inductive panel, the hotkey setup button doesn't bring up the utility, the play button doesn't open wmp, but the Dolby button and stop/play/ff, etc work if I open wmp manually. Any ideas?  I've reinstalled the Second Monitor drivers because I thought that controlled the hotkeys, but I'm not sure.













Solved!

Go to Solution.

Answer:U330 Fn+F5 and some Touch Panel buttons not working

Lenovo Energy Management Driver (Vista, XP).





//help will save the world

3 more replies
Relevance 49.2%

I have a Z460 and sometimes when i'm watching movies on the tv with hdmi, the touch panel (the one with mute, one key theater, smart noise and energy management) goes crazy and keeps activating the buttons on it's own. I looked for a way to resolve this problem and have found none. Is there a way to fix this or at least to disable this touch panel?

Answer:Lenovo Z460 Touch panel going crazy

have you tried to re-install/update touchpad drivers?

9 more replies
Relevance 49.2%

I have just purchased the Ideapad 550 and was testing out the touch inductive panel. At first I felt like none of them were working and I have docked 6 programs on there but then I was able to get 4 out of the 6 working. For some reason it seems like certain programs do not respond on the panel (itunes and opencanvas for me) no matter where I place the icon or even if I try to open it with the mouse in that panel. I put itunes as a shortcut on my desktop and it runs from there. It is a bit disppointing to find that only some programs work on the touch panel. Is there a way to fix this problem? Thanks

Answer:Touch Inductive Panel Problem Y550

I have just received my Y550 today. The touch inducing panel is not working for me!!! Is there a setup required? 

1 more replies
Relevance 49.2%

Hello everybody.

I got an ASUS N50Vn aka X5AVseries..

On the top of the keyboard I got a "touch panel" where I can control the volume, change the computers performance and so on.

But after installing Windows 7 it doesn't work.

Anybody knows what to do? Maybe a speciel driver I need?

Thanks, Peter.

Answer:ASUS - Touch Panel doesn't work?

You have to install all the acpi/she drivers from asus's website. You can use the vista or xp drivers.

(had to do this on an 1000he from asus, but I got almost all hardware keys working)

9 more replies
Relevance 48.79%

Hi all,

I was showing off the laptop this weekend and found that the touchscreen didn't appear to work (i haven't used it in some time)...

I went to the control panel to check if it was on and the Touch Settings Control Panel has a link that goes nowhere. It just throws an error and the control panel icon is now blank.

Now all i've done for updates to drivers is the stuff i've got from the Toshiba Tempro thingy... have they remove this function?

What might I have done to break it?

How do I fix it?

Many thanks all,

Rob.

Answer:Portege M700 touch screen control panel gone...

Go to the Toshiba Website and install the Wacom Dual Touch Driver
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

Also update the BIOS and install the latest Toshiba Value Added Package (assuming you are using Vista).


If that doesn't work, you could try reinstalling Windows by running Recovery (hold the Zero key during power-up). Remember to backup your data first.

1 more replies
Relevance 48.79%

My laptop called HP Pavilion dv6-1100so Entertainment Notebook PC
This laptop has front panel touch buttons above the keyboard for volume controller such as mute button, Volume Increase/Decrease buttons,Play,Next & Previous buttons, stop button and at last it has Wireless on/off button.These buttons were working by touching the buttons once.After 5 or 6 months usage,these buttons stopped responding when I touched them.I don't really get the reason.I tried to restore by using Windows Vista system Restore program but there is no change.I tried to see the device manager, but there is no visible error.But I can control these buttons using the keyboard and buttons from task bar system tray at the right corner.What shall I do?

 

Answer:HP Laptop front panel touch buttons problem!

ncvipf.

You may want to read this from HP,
http://h10025.www1.hp.com/ewfrf/wc/...ry&lc=en&dlc=en&cc=uk&lang=en&product=3927474

The document pertains to HP Notebook PCs with Windows Vista and Windows 7.
 

2 more replies
Relevance 48.79%

Hi


I have had my Satellite P300D for a while now however when i try cleaning it when its been switched off and I run my cloth over the media panel above keyboard it turns itself on which is annoying when trying to clean it.
Does anyone know how to stop it turning itself on i would like to decide when to turn it on lol

Any help Gratefully recieved


Kind regards

Alan

Answer:When I touch media panel my Satellite P300D switches on

Hello

Since when do you notice this behavior?
Have you installed newest BIOS version?

About this behavior I found a similar thread:
http://forums.computers.toshiba-europe.com/forums//thread.jspa?messageID=231754

So I can say it?s normal behavior that is switches on when you touch the mute button.

4 more replies
Relevance 48.79%

Hello everyone
I need your help, I have the model of portable Toshiba Satellite L845-SP4303FA, and I was very uncomfortable the use of the touch panel having already a mouse bought separately, however I don't know how to disable it, I tried with the method of "FN + F5 "But it has not responded by deactivating the panel, I have also tried searching the" Control Panel / Mouse / Properties "looking for some way to disable it, but nothing worked as it should and I still can't use the product with satisfaction.

Greetings.

More replies
Relevance 48.79%

After a quick reformat of my G530, the touch sensitive volume control panel (four black circular buttons in the upper right part above the keyboard) still works but the volume up/down buttons are in slow increments of 2% whereas before blue rectangular sound bars showed up on the screen when pressed and the sound increased by increments of 10%. Where can I find the drivers for the touch sensitive volume control panel? I've looked everywhere but can't find them. Any assistance would be greatly appreciated. Lenovo G530 4446-35UConexant High Definition SmartAudio 221V. 4.55.0.0













Solved!

Go to Solution.

Answer:G530 Touch sensitive volume control panel

try to re-install power management from here

2 more replies
Relevance 48.79%

What I thoght was an issue with certain touch drivers might not be. After uninstalling the latest tablet pc touch drivers from wacom and installing some recommended drivers from the fujitsu site I ran into the exact same problem. I finally found out it always happens if I hibernate my latop. If I then restart the laptop everything is back to normal. After hibernation symptoms include:- Rotating the screen to anything other than the original direction has no calibration data.- Pen input not recognized as pen input, input panel does not appear. If I touch the panel with my finger the panel will appear docked on the side.- Unable to calibrate the pen, input just isn't accepted by the program. I have to hit ESC. Anyone else have this issue?

Answer:x201 Hibernate destroys touch panel settings.

Ok now i'm having trouble after a restart as well. This is driving me crazy! Can someone please tell me how to have pressure sensitivity and no problems? What combination of drivers must one use?!

1 more replies
Relevance 48.79%

Hello guys, can someone help me.  Bought a y330 last week, and I have a problem with the touch inductive panel. Before everytime I activate it, the mute button is always turned on.  This time when I booted my laptop, the panel is lit up like a xmas tree, and all the buttons are activating and launching items all by themselves. Hope you guys can help...













Solved!

Go to Solution.

Answer:ideapad y330 touch inductive panel problem

Either driver or hardware problem.Try reinstalling hotkeys driver, though I doubt it will work.If this doesn't help, you'll have to send it for repair.





//help will save the world

3 more replies
Relevance 48.79%

I prefer to use a mouse over touch pads and all my previous LT allowed me to enter control panel> mouse> device> setting and then deselect the Synaptic pad Or by using the fn key combo and toggle the pad.  This windows 8 Z580 64 does allow me to do any of these things BUT it resets to the ON selection after every time the screen blanks, the LT hibernates or sleeps.  Never before have I had to reset the settings after each use even a bathroom break.  It is a killer to be half way through a document only to find the cursor is 16 lines above where it should be and forcing a complete reread to see how many different places this occurred.  I am not overly bright and certainly do not want to totally disable the thing in case a mouse fails but I really do want it to stay off until I hit fn F6.  Internet searches show this is a problem to some extent and usually say to remove drivers or disconnect the wiring.  These seem extreme.  Shouldn't this be a registry key change???  Please will someone with more knowledge help me with this issue.

More replies
Relevance 48.79%

After a manual install my touchpanel above the keyboard has gone dark, but it lights up shortly when i touch it, howerver none of the applications that are associated with the panel buttons activate. What is missing here?

Everything else in the system works 100%

Any help would be nice guys.

Thx

Geekster

Answer:Qosmio X300 - non-working touch panel above keyboard

Reinstall the "Value added package" from Toshiba driver page, This should clear up the problem.

http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU

5 more replies
Relevance 48.79%

I have recently repaired an HP laptop with a defective keyboard, but in the process, I broke the cable that connects the volume control panel at the top of the keyboard to the motherboard. My question is where I can buy a replacement that's not for an arm and a leg.

Answer:Ribbon cable for volume touch control panel?

Hi,Manual: http://h10032.www1.hp.com/ctg/Manual/c02638165Specs: http://support.hp.com/us-en/product/HP-Pavilion-dv7-Entertainment-Notebook-PC-series/4011368/model/4...Did you mean speaker assembly in Page 4-26?Cable comes with the assembly: HP part number : 531902-001�RegardsVisruth

1 more replies
Relevance 48.79%

My Lenovo Edge 15, i7-5500U Broadwell Processor, laptop is having same problem as described in this post (LCD Panel Auto-Touch or ghost touch solution) see post: https://support.lenovo.com/us/en/documents/ht103512. The solution listed is for the Yoga. I have confirmed I too have the LCD Panels, is there another fix for my Edge 15machine, or can I use the fix and download link mentioned in this article? I appreciate your help. Thanks.

More replies
Relevance 48.79%

Hi,

I have a Packard Bell EasyNote TJ68 Windows 7 with a touch panel control on the keyboard. With the touch panel it is possible to toggle Bluetooth on/off, wireless on/off, voume up/dn etc.

When the touch panel is in use, an icon appears on the screen momentarily. These icons are now missing. The touch panel is functional and the windows equivalent icons do appear correctly in the taskbar but the icons that used to flash up when using the touch pad have disappeared.

Anybody know how to find where these are turned off? What program controls the touch panel icons?
 

More replies
Relevance 48.79%

Hi, my XPS 15 9530 touch screen is not working anymore. The wire for the touch screen which emanates from the display panel and goes into the motherboard  seems to have burnt at a point. I am not sure why it burnt suddenly . Is there way I can change this wire without replacing the whole display unit?
Any help or suggestion is highly appreciated..
Thanks,
(ps: i m out of warranty)

Answer:Touch panel wire damaged: Dell XPS 15 9530

Unfortunately, no - the assembly is fused together with adhesive.  It's very unlikely you would be able to disassemble the glass without breaking it, and even less likely you'll end up with a working assembly when you re-assemble it.
There are a couple of possible causes -- a shorted wire from being crimped together is one.  A second one would be a power fault with the mainboard that sent too much power through the cable and caused it to overheat.  You may want to refer the repair to a professional so they can determine what happened before you spend a few hundred dollars on a screen only to find out you need to spend that much or more on a mainboard replacement as well.

1 more replies
Relevance 48.79%

Hi, please can you let me know how I go about ordering a replacement LCD Panel for my Inspiron 5759 with a full HD, non-touch panel ( 1920x1080 ).  
I've got a couple of scratches on the panel and would like to replace it myself but unsure how/what spare to order.  I'm in the UK if that helps.

Thanks in advance,
 Graham

Answer:Replacement LCD Panel for Inspiron 5759 (1920x1080 non touch)

The best way to proceed is to order the exact screen you have now (the Dell part number is on the back of the panel itself).
There is a set of Dell part numbers for screens here as well.
www.parts-people.com/index.php

1 more replies
Relevance 48.38%

I just recently bought a new ideaPad Y510. . After 2 weeks played with my new NB, I could not find any way to use or activate "Touch inductive panel and multi media buttons" (as writen in page 17 of the User Guide book) on the top of keyboard. In the ideaPad website it is written as "Touch-sensitive multimedia controls" or "Multimedia Control Center with touch-sensitive buttons". I asked the salesman in the Computer shop where I bought it, he said they are just indicator lamps, and told me to used Fn + F1..F12 buttons (with orange colors) instead. Please help to confirm or clarify my understanding. If they should function, not just indicator lamps, please help me how to activate them. ThanksMessage Edited by athmam on 03-13-2008 04:34 PMMessage Edited by athmam on 05-06-2008 11:25 AM













Solved!

Go to Solution.

Answer:Touch inductive panel and multi-media buttons (Solved)

salesman is wrong. you should touch the spot where the indicator lamp is shining. its is actually the touch button. if they are not working then they must be fault...time to get a rma or repair loop

8 more replies
Relevance 48.38%

Hello there,I have described the same problem as here in the post:  LCD Panel Auto-Touch malfunction solution - Yoga 3-1470  https://download.lenovo.com/consumer/hnt/yoga_3_1470_lcd_autotouch.MOV but the patch does not work for me. Can anyone to customize the patch that works for me? My LCD Panel Harware ID is: MONITOR\LGD044F and Machine Type Model 80FL0001GEBest thanks in advanceGunnar

More replies
Relevance 48.38%

How's the quality of this kind of products?
My father broke the screen of his 930 which costs a lot of money to replace, since the outer screen is the only broken part, we thought of this....

More replies
Relevance 48.38%

Some features gone wrong after upgrading to Windows 7 32bitsThe upgrade(clean not in-place) was done using a separately bought OEM Wins 7 Disc, not media from the Lenovo upgrade program. Problems:The ThinkVantage program group doesn't get created in start menu no matters using ThinkVantage Update or exe packages off Lenovo web, I had to pin back some important apps like power manage one by one manually.Tablet panel buttons don't work at all. None of the four buttons work including the screen rotation.The touch driver obtained by the auto-update seems to be an outdated one, it behaves exactly the same as the old one where the boundary area of the screen does not recognizes touch input accurately as the touch input goes outward from center. I went to the Lenovo CS center nearby and got another ver of driver when the machine was running Vista so I can tell the difference. I did tried to manually clean-reinstall drivers usinghttp://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70656Unfortunately the problems dun go awayThe machine make is 7448-CTO Built-to-Order

More replies
Relevance 48.38%

Hello,

I recently purchased an A500 (PSAR9A-02J001) laptop running Windows 7 (32-bit) Home Premium. Not all the top Multimedia touch panel buttons are working. When buttons are pressed, the laptop makes a beeping sound (which is normal) but the corresponding function is not executed.

For example, the Eco button at the top doesn't switch on/off the eco and the mute button does not mute the volume.

Device manager shows all devices as working correctly.
There are no errors in the Event Viewer Application or System logs.

Please advise!

Thank you,

Answer:Multimedia touch panel buttons on Satellite A500 are not all working

Hello

Try please to reinstall Toshiba value added package.
Remove preinstalled version, restart your notebook and install latest version from Toshiba download page.

1 more replies
Relevance 48.38%

Hi, So yay I finally got my computer! Thank you Lenovo forums... I have a ideapad u330, and everytime i use the touch sensitive inductive panel that controls my media player, it opens Windows Media Player. I want to use iTunes, and have been trying to tinker with it but cannot find the settings or config for the inductive panel, has anybody figured it out?  













Solved!

Go to Solution.

Answer:Changing Media Touch Inductive Panel Settings? for U330

I am fairly sure that there is no option to make it control itunes. I know that there is a program that will stop it from opening up WMP, but you have run the program every time you want it not to open up WMP. I hope that lenovo provides a solution to this cause its really annoying.





Ideapad Y530, P8400 @ 2.26 GHz 320 gb HDD, 4 gb RAM, nVidea 9500M 512mb VRAM.

9 more replies
Relevance 47.97%

As I was using my laptop, a Y50-70 Touch, it turned itself off and now I've been unable to turn it back on at all. When I hit the Power Button it lights up for a second or so, as do the white LED indicator lights on the front of the laptop, but nothing else happens, the keyboard backlights doesn't turn on and there are no other sounds from the laptop, no fans, nothing. It does this with the power cord plugged and the battery in and every other configuration possible, nothing. I'v removed the battery and tried to discharge any additional charge left by holding the power button down for extended periods of time, I've also hit it at least 30 times or more. It doesn't do anything when the battery is put back in. I've tried this multiple times. I've checked every connector and they all seem perfectly fine. Im out of warranty so I can't send it in to be fixed. This laptop has been a disaster, the screen constantly flickers and the hinges are both cracked. I'll never buy another Lenovo.

More replies
Relevance 47.97%

I have a Dell inspiron n5110 (i know its an oldy) and suddenly i can't turn of the touch pad since in am typing all the time it gets in the way and the cursor flies all over the screen. 
I used to be able to turn it off with the Fn + F3 buttons but it doesn't work anymore. 
when i try the settings i only get the mouse settings
i updated all the drivers
what can be done?

More replies
Relevance 47.97%
Question: Touch Pad turn off

I routinely use a USB mouse and would like to toggle off the touch pad.  How would I go about doing it?
Thanks.

Answer:Touch Pad turn off

Hi bobrichards800,
Thank you for reaching out to Dell Community Forum.
Please share the system model or please click my DELL-username and send me a Private Message with the Dell Service Tag number and your email address, so that we can guide you with the necessary steps.
Note: please don't mention the service tag or email id on the public forum as it contains your personal information

1 more replies
Relevance 47.97%

I recently purchased the y510. I configured the user defined key (the second one) on the touch panel to launch firefox. Now I want it to launch some other program, how do I reconfigure it? And also, I use VLC media player and not the windows media player, the touch media buttons and the function buttons (f9 - f12) are configured to work with the windows media player, is there some way i can change the buttons to work with VLC?Thanks in advanceMessage Edited by evilkunevul on 05-11-2008 09:00 AM

Answer:Y510 - Touch Inductive Panel - user defined key and media keys

So do I. I want another player. Besides, I think it would be better to provide SDK for all sensor keys.





//Y510

4 more replies
Relevance 47.15%

Hello, im trying to figure out how to turn off the touch pad on my acer travelmate 4200 laptop. My thumb tends to bump it when i type, so it would be nice if i could turn it off when i have a regular mouse plugged in.

Thanks,
gimpster
 

Answer:Turn my touch pad off when i have a mouse in!

a little help here?
 

6 more replies
Relevance 47.15%

I have a U310 Touch.  It crashed the other day and the windows repair came up.  I let it run all night and it was shutdown in the morning.  When i turned it back on, I just get a lit black screen.  There is no beeping or logos when it boots up.  Tried rebooting many times and always the same out come.   I than decided to replace the Harddrive.  I took the old harddrive and tried to boot it in my other machine.  When it would load it says it needed to repair windows but locks up everytime it tries to repair.  So I got a new HD and loaded windows onto from my other computer.  It boots just fine in the other computer.  I put the new HD into the laptop and nothing still the same problem.  Other things I have tried:- Unhooking power and battery and pushing the power button to clear out- Booting with CMOS battery unplugged- Pulling ram and booting ** this caused the screen to not even show **- Pushing the button on the side next to the power brings up a menu with four options and all options bring it back to the   black screen  Any ideas? **Edit**When I put a bootable linux usb in the USB slot, and use the Novo boutton i get the Novo Button Menu.  Any selection I make with the USB drive in I get "Secure Boot"  Image failed to verify with *ACCESS DENIED*













Solved!

Go to Solution.

Answer:U310 Touch Won't Turn on

Hi Digitalt,
 
Welcome to Lenovo Community Forums!
Please perform these settings to allow you to boot in USB.
 
Boot into BIOS (Turnoff the computer and Press the OKR Button)
 
Inside BIOS
    Under Boot Tab
          Change Boot mode to Legacy
           USB Boot should be enabled
    Under Security
          Secure Boot Has to Be disabled
         
In case the options above are grayed out in your BIOS, Got to Exit Tab and Change OS Optimized Default to Other OS
and check the options again.
 
Once All are Set Make sure to save all changed by hitting F10 and enter for Yes
    After Hitting enter It will Restart and You have to keep on tapping F12
       this should pull up the Boot Menu letting you select where to boot. You should have now your USB Stick as an Option.
 
Try Booting into your USB again
Let me know if this worked for you
Solid Cruver
 





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on T... Read more

6 more replies
Relevance 47.15%

I bought a Lenovo G50 laptop yesterday at Best Buy.  One of the features I enjoyed at the store was the touch screen. This would make one of my programs much easier to use. However, I've messed with this thing all day and cannot figure out how to make the touch screen work. Someone please help.
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.













Solved!

Go to Solution.

Answer:G50- How Do I Turn on Touch Screen

Dear SPortel,
 
Could you please attach a screenshot from your laptop serial number in a Private message.
 
Regards,
Joseph

5 more replies
Relevance 47.15%

I just got this computer about 3 weeks ago and I love it but there is one thing I find incredibly annoying and that is the app switch function on the touchpad. Whenever you accidently swipe left on the touch pad (for ANYTHING, whether I'm surfing the web, trying to rewind a video on youtube, or just messing with my cursor) the screen switches to another app. I find this function to be incredibly annoying since its on the left side of the touchpad and that is where our fingers naturally go to since we tend to use left-click. Why the makers didn't put this function on the right side (or at all) of the touchpad will remain a mystery. However, please help me get rid of this annoying function that keeps switching me to another app while I'm perfectly fine using the one I'm focusing on at the moment. Thanks

Answer:How to turn off the App switch on the touch pad?

You can disable all the Edge Swipe functions by going to Mouse Properties, click on the Device Settings tab, select Synaptics ClickPad, press the Settings button, click on Edge Swipe, uncheck the Enable Edge Swipes checkbox.  But you'll lose all of: Enable Edge SwipesSelect the Enable Edge Swipes checkbox to enable a one-finger movement from the edge of the TouchPad in towards the center of the TouchPad:1. A swipe from the left edge to the center switches from the currently open application to the previously open application.2. A swipe from the right edge to the center opens or closes the Charms bar.3. A swipe from the the top edge to the center opens or closes the Application Bar.

3 more replies
Relevance 47.15%

HiI don't know, maybe the problem came from windows 10 updates, but I have the issue:laptop turn off touch screen by itself, it seems that laptop think I don't need it, but if I rotate it in 180 degree or 360 degree mode, touch screen turn on. What is it?In System settings I set that windows must always ask me before change tablet mode, but no notifications appears when touch screen turning off or on.Where are settings I have to change?

More replies
Relevance 47.15%

I accidentally switched on the amber update and now my screen has stopped sliding, and I cant go back to amber update any more, please help

Answer:How can I turn off double touch?

What?

4 more replies
Relevance 47.15%

Since installing Windows 10 I can longer turnoff the touch pad on my Yoga 2 Pro.   In Windows 8 I just had to press F6 each time I logged in.   I much prefer my cordless mouse plus I wear a compression sleeve on my right hand and arm and it catches on the touchpad when I am typing - very very annoying.   Apprecate any help.
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.

More replies
Relevance 47.15%

How do I turn off touch screen I don't have the option to turn off finger input in the touch and pen settings PLEASE HELP!!!!!!

More replies
Relevance 47.15%

How can i turn off the touch screen of my HP Envy M6-k025dx?













Solved!

View Solution.

Answer:Turn off my touch screen

What is the installed operating system? 

10 more replies
Relevance 47.15%

Hello, I purchased a U310 Touch about 15 months ago that is no longer under warranty. Every time I try and boot the machine I receive no response from the machine. The power light turns on, the fan spins, the HDD turns on but the screen never displays anything. Even when I close the clamshell the machines power button stays lit and won't shut off unless I kill the power by holding down the power button. My troubleshooting steps have been:Reset RAMUnplug battery from motherboardWait for battery to completely drainBoot with HDMI monitor to see if anything displays (nothing would, so LCD panel should be good) With all of these, I cant get the machine to fully function. It feels like the machine is in total sleep mode, I feel like it needs a new motherboard. With my experience with lenovo I feel like this will be the last machine I ever purchase from them, this is unacceptable for a laptop of this age.  Does anyone have any similar situations? If so did you purchase a new motherboard and was it good to go? I'm very comfortable with ripping machines apart since I used to work on a help desk. I would hate to spend $100 on a part and waste all that time if it wont fix the issue.  Any help is greatly appreciated.Thank you.













Solved!

Go to Solution.

Answer:U310 Touch Won't Turn On

Hi overtheborder and welcome to the community,
 
What OS are you running?  Maybe two things you can try depending on the OS.
 
Remove the hard drive and see if it boots to the bios.
 
Try booting a usb flash drive with linux.
 
Regards,
Dave
 
 

7 more replies
Relevance 47.15%

So I came back from vacation and I had my PC on parts in my bag under my desk.So I came back and started to set it up and get all parts connected, all was set up and I booted my pc, it started and I got to windows but if I touched the case it would turn off, also I noticed when plugging in the adapter, it had a little lightning out there.By the way me and my cousin are using same adapter which has 4 holes and each of us uses 2 of them, the adapter we are using is plugged in into other adapter that is plugged in the contact, I didnt like the idea from beginning but I think this might cause a problem, let me know what you think.So after that if I tried to boot up the pc it would make the starting noise but then instantly shut down after 2 seconds.I looked over forums, and I think because I touched it, the electricity is messing up and that is why it was shut downing multiple times even if accidentaly touch it or even slightly move it not even with my hand.In the morning i detached all parts and started setting up again and making sure all parts are well connected and I did do everything precisely and after I click the power button this time it does not even start, there is not any sound, I checked my power switch button, all the cabels, everything is in, I noticed that when I touch the box though I dont know if im delusional or no, but something tickles my hand it felt like very little electricity but not quite sure, my box is metal though.Also I noticed when I replugged the ca... Read more

Answer:My computer would turn off If I touch it

what country did you bring the PC from?
The UK uses 230V AC, the switch on the power supply unit may be set to 110V you need to change it to 230V, you may have blown the PSU or even the rest of the PC if it is set wrongly.

8 more replies
Relevance 47.15%

I have an HP Envy Laptop running Windows 8.1, it is only a few months old.
I have a problem when using the Keyboard I find my old arthritic fingers are getting in thee way, I keep catching the touching pad & it sends the cursor all over the place.
Is there anyway I can turn off the touch pad to stop this happening. When using the Internet I am also told it has stopped working clicking on the top right hand side it turns of the notice with no problem to the internet.
Thank you

Answer:Turn off touch pad on laptop

Try this, open control panel and double click mouse. In the properties box select the touchpad under the buttons tab. Might be selected anyway. Click on the device settings tab and select disable. Click ok on the warning popup.

5 more replies
Relevance 47.15%

I help to turn off assistive touch on my windows phone.

Answer:How do you turn off assertive touch?

What is assistive touch? If you rock a Lumia go to Settings > touch to adjust touch sensitivity.

2 more replies
Relevance 47.15%

Back door trojan virus malware ive tried AVG to delete it but it hasnt worked i've included a hijackthis log although im not really sure how to use hijackthis i also have no control panel and all of my icons are highlighted in black i believe that is related to the virus any help appreciated


Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:30:32 PM, on 10/22/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16544)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\Program Files\Intel\Wireless\Bin\WLKeeper.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Grisoft\AVG Anti-Spyware 7.5\guard.exe
C:\Program Files\Digidesign\Drivers\MMERefresh.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\Program Files\Google\Common\Google Updater\GoogleUpdaterService.exe
C:\Program Files\Dell\NICCONFIGSVC\NICCONFIGSVC.exe
C:\Program Files\Intel\Wireless\Bin\ZcfgSvc.exe
C:\WINDOWS\Explorer.exe
C:\Program Files\Intel\Wireless\Bin\RegSrvc.exe
C:\PROGRA~1\Intel\Wireless\Bin\1XConfig.exe
C:\WINDOWS\system32\ZoneLabs\vsmon.exe
C:\WINDOWS\ehome\ehtray.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxpers.exe
C:\Program Files\Synaptics\SynTP\SynTP... Read more

Answer:Solved: No control panel, pop ups, no where else to turn

16 more replies
Relevance 47.15%

I've just installed one of those USB front panels in one of the empty CD Rom bays. It works off the rear USB ports (not the internal header on the motherboard). When the computer is asked to shut down, Windows will shut down but the PC will remain on until the front panel is disconnected from the ports at the back. I am running Windows XP on an MSI board with sinlge core AMD Athlon CPU. Any ideas?

Answer:Installed USB Front Panel - now PC won't turn off

Try using Safely Remove Hardware that appears in the Notification Area.Close down the device before switching off.You could also check for any leads that may of been knocked and dislodged when installing the the front panel.

3 more replies
Relevance 46.74%

Occasionally, but moreso when my laptop is not on a desk, the touch panel buttons (mute, lower volume, raise volume, onekey theater mode, thermal management mode) will activate themselves without me having touched them. I have had this laptop for around 1-1.5 weeks now, and this problem is rather bothersome when listening to music, or playing a game.

Answer:Z470 touch panel is muting/adjusting volume/changing onekey theater modes by itself

have you tried to re-install power management and/or one key theater?also, do not forget to check if you have the latest bios from the lenovo download page.

9 more replies
Relevance 46.74%

Ok so I bought my father a laptop a few years back and now he has passed it on to me. I am wanting to turn off the tapping on the touch pad but I just can't find an option to do so.
I have installed a fresh copy of Windows XP Pro so there could be some drivers missing that come on the recovery CD.
I have tried to track down any drivers but I can't find my Laptop anywhere. I ran the Toshiba program which is supposed to detect which laptop you have but it came up with nothing when I ran it and I also searched in the drivers section on the Toshiba site but my laptop doesn't even appear in the choices of laptops.

It is a Toshiba Equium and on the back it says Equium A60-173 and the model number is PSA67E-00700C8J.

So if someone can please tell me how to turn off the tapping on the touch pad that would be great. I can't turn the touch pad off completely because obviously I use it to control the mouse pointer.

I saw a post that said to press Fn and F9 but that did nothing, probably because I don't have the correct drivers installed.

Any help would be great.

Answer:Need To Turn Off Touch Pad Tapping on Equium A60-173

Hi buddy,

The tapping function of touchpad can be disabled in touchpad driver options. FN+F9 key combination will disable the whole touchpad so it?s another function.

The tapping function can only be disabled if the touchpad drivers are installed. If you install Windows from a normal Microsoft disk no drivers are installed and everything you have to install yourself. If you use the Toshiba recovery disk all drivers and tools will be installed automatically because it contains an image of factory settings. So recovery disk is more comfortable.

All drivers and tools that you need now can be downloaded here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
*Archive* > Equium > Equium A60 > PSA67E

As you can see you must only search in Archive to find the drivers ;)

1 more replies
Relevance 46.74%

anybody know how to tun off the multi touch on the lenovo y650, I dont want to disable the trackpad, I just want to turn off the multi touch function..

Answer:How to turn off Multi Touch on y650

Go to Control Panel, select Mouse Under the Device Settings Tab select Settings that should bring up the Synaptics properties you have a plethora of options and settings to turn on/off or adjust. If you double click sensitivity you can make adjustments to your likings.

1 more replies
Relevance 46.74%

Put Windows 8 on Thinkpad X220 and the touch-to-click is driving me nuts. I keep going into settings to uncheck that option in the UltraNav tab in Mouse Properties, and it keeps resetting itself after a reboot. Any ideas on how to make this setting stick?

More replies
Relevance 46.74%

There seems to be an answer for every Thinkpad but this one, nothing I do can turn the Touch Pad off....I like to use a Mouse. Thanks in advance for the help!!

Answer:How to turn off the Touch Pad Yoga 11E 20D9?

Hi
 
There is no "nice" option to disable touchscreen, for what I read you need to disable it from the Windows Device Manager.
 
It is like: Open Device Manager > expand "Human Interface Devices" > right-click "HID-compliant touch screen" and select "Disable".
 
Check if you find the correct "Human Interface Devices" to disable. This is how users are disable the touchscreen.
 
Regards

2 more replies
Relevance 46.74%

I have an envy m6 touchscreen that is giving me problems that i can't solve. It has been great up until recently. i was using my laptop last nite when suddenly it turned off but i didn't think that the battery shoukd have been dead yet. its acting as if the bat is empty and plugging it in just turn on the orange led by the power plug. when i press the power button it flashes for a second but the screen does nothing and it doesn't actually turn on.I'm using my phone to attempt to find a solution atm which is very frustrating. adding to the stress is the fact that i have school work projects and a midterm project on it that I need to finish.Almost forgot to mention it started doing a few other odd things over the last week such as the touchscreen going nuts registering phantom touches endlessly until i close/hibernate/shutdown it.











Solved!
View Solution.

Answer:envy m6 ultrabook touch won't turn on

Ok thank you. i was hoping that there might be some little trick i had not encpuntered yet but was afraid that it really is just a hardware issue and requires calling in. i will try to do that today if possible

10 more replies
Relevance 46.74%

Hey all, I've been having some problems with starting up my IdeaPad.  When I hit the power button, it usually just turns on for a sec, then powers right off.  If I hold it down, it lights up for a bit, then lets out a loud BEEP for a few seconds, then goes back to being off.  I've tried holding down the power button while the battery and AC are unplugged, but nothing seems to help. Any help would be appreciated. Thanks!

Answer:Ideapad s510p touch won't turn on

hi mike829,
 
Welcoem to Lenovo Community Forums!
 
I would suggest Checking the RAM and the HDD.
 
You will need to take them out and reinstall them one by one starting with the RAM.
 
The computer will turn on without the HDD so i suggest remove the HDD first then try testing out the RAM.
 
See if this will show any difference on hoe the system behaves now.
 
You can check this Maintenance Manual on how to get access to the parts
 
 
Hope this helps
Cheers!
 
 





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 46.74%

Ladies and Gents,
Brand new here and by the looks of some of the topics, I'm way over my head. This post may be in the wrong part of the forum but, I thought I'd at least start here. I have a HP Laptop that's in the neighborhood of 12-14 months old. It came with Vista Home premium which, worked OK at best. I recently got a chance to pick up Windows 7 Professional for a very reasonable price so, I had a friend install a brand new version of it along with a newer version of Microsoft Office 2010.

Well, here's the problem. The computer has an "on-off" button just above the touch pad. Before the installation of Windows 7 Professional, the button worked just fine in turning the touch pad on and off. Well, now it has absolutely no effect on the touch pad at all. It still changes the colors of the tiny lights, just above the button, from a white, (indicating "on") to orange, (indicating "off") but, zero effect on the operation of the touch pad.

This is quite frustrating because of the cursor movement while typing etc. It throws it all over the place and all of a sudden the page is changed, I'm typing in a different sentence three paragraphs above where I should be typing etc. What a pain. Is there something that changed the effect of the button during the installation of Windows 7?

If so, how could an operation system change, even as big as going from Vista to Windows 7 have an effect on MANUAL BUTTON above the touch pad. In my opinion, that button... Read more

Answer:Win 7 recent install, Touch pad won't turn off, Help please

FU, welcome to SF. Please post your system specs.

4 more replies
Relevance 46.74%

I have a T410s and i think that the processing speed of my computer is slowed by having the touch screen on constantly even when not in use. Is there a way to turn it off when im not using it? Even if the processing speed isn't lowered I still would like to turn of the touch screen sometimes.  

Answer:Is it possible to turn of the touch screen on my T410s?

Hi.Try start->search for pen and touch--> then uncheck "Use your finger as an input device" in the Touch tab.

1 more replies
Relevance 46.74%

Can anyone help me with turning on the touch screen on my hp 15 notebook pc. The model number for my hp is 15-f233wm. I have tried what the geek squad of best buy has told me and it still is not working.

Answer:how to turn on the touch screen on hp 15 notebook pc (15-f23...

Hi, No, your machines does NOT have a touchscreen, it only has:     15.6" diagonal HD BrightView LED-backlit (1366 x 768) Source: http://support.hp.com/us-en/product/HP-15-f200-Notebook-PC-series/7527799/model/8857447/document/c04... Bring back to them and ask them how to use touch screen on a NON touchscreen computer. Regards.

3 more replies
Relevance 46.74%

I'm an artist, and so using the pen for the surface pro 4 is a breeze and makes drawing so much easier, but it acts up sometimes. I disabled touch screen in Device Manager so I could draw freely without worrying about messing up the piece with accidental hand contact to the screen. Though it works sometimes, most always when I make contact with the screen it still registers, not fully, but just enough that it ruins what I'm doing. Please fix this or help me to fix it, I've got commissions to do, and this isn't helping at the least.

Answer:How to turn touch screen off fully

Hi Here's what HTG says! I don't know what else you could do??
Here's another link you might give a look! How To Quickly Disable Touch Screen Input In Windows 10/8.1 How To Quickly Disable Touch Screen Input In Windows 10/8.1

1 more replies
Relevance 46.74%

I have an ideapad s415 touch. I've had the laptop since february...so it's only 3 months old. I hardly use it because I am constantly using my work laptop. Therefore my Lenovo is always sitting on my coffee table. So today I was using the laptop...I was typing up my resume in Word and then all of a sudden the letters wouldn't appear. This was a problem I've been having for the entire weekend and I would just close the laptop and it would work. So today when my typing didn't appear, I closed the laptop and opened and it was frozen on my lock screen. I tried pressing buttons to wake it up but nothing happened. So I turned it off and when I tried to turn it back on nothing happened....just blackness.So right now my laptop is dead and I don't know why and how. I tried all of the trouble shooting...taking out the battery and pressing the power button for 30 seconds...I tried pressing the novo button on the side....but nothing is happening. When I press the power button 3 lights turn on...the power button on top and the two lights at the edge of the laptop. They stay lit for 10 seconds and then the lights go out. Also, when I press the power button, there is no sound. So yeah, after 3 months, my laptop doesn't work anymore. I would like to note that it has never been dropped and water has never touched it. What should I do????? 

Answer:3 Month Old Ideapad S14 Touch won't turn on

Hey man did you ever get this problem fixed I have the exact same issue now. Thanks.

5 more replies
Relevance 46.74%

Hi, I have a 360 touch screen laptop (bought the middle of last year). The on/off button is placed on the side and usually 'clicks' when you press it to turn it on. I went to turn it on the next morning after using it the previous night, the 'click' that it usually made when you press it wasn't there. It was soft touch. I'm having trouble trying to explain it but hope that it can kind of be made sense of. This problem has resulted in me not being able to turn the laptop on. I was wondering if there was another way of turning my laptop on or if there is anyway of fixing it. Please help!!!!

Answer:I have a 360 touch screen laptop and I cant turn i...

Hi Friend. Don't worry I could understand the problem. What you mean is that the button on/off is stuck or locked and you need to press too hard for you to turn on or off. In this case you may need to take your computer to review to be repaired and can take off the button so that it works again. If your computer is under warranty and you have no way to open it, you better take it to repair so that you can help. I hope you find it useful information, you have nice day! Greetings. ^^





Si te agrada mi respuesta le puedes dar un Kudo y si permitió resolver tu inquietud la puedes marcar como la Solución a tu solicitud.Siempre estaré para brindarte mi ayuda en todo lo que necesites! Gracias por tu apoyo!

3 more replies
Relevance 46.74%

I am using windows journal a having problems that I can not turn off finger input when writing with a pen. The screen becomes insensitive to a finger when I am about an inch away from the screen with the pen, but this is not enough to avoid accidental dots and lines with your finger. Can one either configure the pen distance from the screen from which on finger touch is disabled? Or can one disable finger touch altogether? I have been following some discussions on forums providing some workarounds, but maybe there is a simpler solution around?138

More replies
Relevance 46.74%

Hello: I was using my U530 Touch and suddenly it shut off. It will not turn back on, either. I was browsing the internet at the time, not overworking it to my knowledge. I didn't spill anything on it, drop it, or do anything recently of which I'm aware that would cause some sort of effect. I didn't notice it overheating. The A/C adaptor was plugged in at the time, and now, the charging light for the battery is in fact the only thing that will function. I assume it's a hardware issue, given the complete lack of response, but if it's possible that there's some way to wake it up into a safe mode and address it from there, I'd be happy to try. Any ideas on what's happened here or any at-home fixes I can try? Thanks.

Answer:Ideapad U530 Touch will not turn on

Hi Felixnspooner,
 
Welcome to Lenovo Community!
 
As per the query we understood that you are facing issue with the system not powering on in your Lenovo U530 laptop.
 
Please try to connect to different power socket and check for the issue, also try to check with different adapter as this issue could be due to faulty adapter. If still the issue persists then please visit the nearest service center for further details.
 
Click here to open a link where you can select the country and get the exact contact support number. I?m sure
they will be a great help.
 
Hope this helps. Do post back if issue persists!
 
Best regards,       
 
Ashwin.S





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 46.74%

I want to turn off my Y70 touch screen  - I don't use it and it drains resourses and slows my system down.  Windows 10. Thanks.

Answer:Want to turn off Y70 touch screen capabilities

Hi , Fscanlon    -
 
Thank you for writing in to the Lenovo Forum - happy to have you here today.
 
Click here to know how to disable the touchscreen.
 
Update us how it goes.
 
 
 
Regards,         
 
Tap that kudos button if I helped  If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

1 more replies
Relevance 46.74%

So I was using my lenovo all in one c540 touch and I went to take my baby a bath for no more than 30 minutes. When I go back to get back on Im sure it was probably in sleep mode but it won't turn back on(screen still works) but the power lights come on and I hear a popping sound and fans moving. I've taken the power cord out and put back in but still get the popping sound and does not come on. Need help!!

More replies
Relevance 46.74%

There seems to be an answer for every Thinkpad but this one, nothing I do can turn the Touch Pad off....I like to use a Mouse. Thanks in advance for the help!!

Answer:How to turn off the Touch Pad Yoga 11E 20D9?

Hi
 
There is no "nice" option to disable touchscreen, for what I read you need to disable it from the Windows Device Manager.
 
It is like: Open Device Manager > expand "Human Interface Devices" > right-click "HID-compliant touch screen" and select "Disable".
 
Check if you find the correct "Human Interface Devices" to disable. This is how users are disable the touchscreen.
 
Regards

5 more replies
Relevance 46.74%

I have an HP all-in-one TouchSmart 320 PC, that is about 4 years old. About a month ago we went to turn it on and nothing happened. Originally, we thought it was the power source as the power supply box green light was flashing. We have tried 3 different cords and still nothing. Can anyone tell us what is going on? I do remember that before we tried to turn it on about a week prior to that I had shut down the computer, but it had updates so it was doing that but I never paid attention how it shut off, whether expected or unexpectedly. Can anyone help?!?

More replies
Relevance 46.74%

Ok I have this laptop that belonged to my father and I have a problem. Basically I am wanting to turn off the 'tapping' on the touch pad but I just can't.
I have searched online for an answer but nothing I try will work. There are no settings in the control panel, either in the mouse settings or anywhere else that let you turn the tapping off.
Something I read said to press Fn and F9 but that does nothing.
I do remember turning the tapping off once when my dad had the laptop but I can't do it the same way because I installed a fresh copy of Windows and it wasn't from the recovery CD so the software for the touch pad isn't there.
I have tried searching for the software but it appears that this model of laptop doesn't exist!
It is a Toshiba Equium EA60-173 and the model number is PSA67E-00700C8J but I just can't find anything to do with the laptop on the Toshiba website. I did manage to find and try a program called Toshiba Touch and Launch which let me change some aspects of the touch pad but not the blasted tapping.
So if anyone can think of anything else I can try apart from what I have tried already then I'm all ears.
Thanks in advance.
 

Answer:Solved: Cannot Turn Off Tapping On Touch Pad

16 more replies
Relevance 46.74%

There seems to be an answer for every Thinkpad but this one, nothing I do can turn the Touch Pad off....I like to use a Mouse. Thanks in advance for the help!!

Answer:How to turn off the Touch Pad Yoga 11E 20D9?

Hi
 
There is no "nice" option to disable touchscreen, for what I read you need to disable it from the Windows Device Manager.
 
It is like: Open Device Manager > expand "Human Interface Devices" > right-click "HID-compliant touch screen" and select "Disable".
 
Check if you find the correct "Human Interface Devices" to disable. This is how users are disable the touchscreen.
 
Regards

4 more replies