Computer Support Forum

Event ID 7000 and 7038 on Shutdown

Question: Event ID 7000 and 7038 on Shutdown

Got these on my shutdown last night, I don't think I have got them before. What are they exactly?

The NgcCtnrSvc service was unable to log on as NT AUTHORITY\LocalService with the currently configured password due to the following error: The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.To ensure that the service is configured properly, use the Services snap-in in Microsoft Management Console (MMC).
The Microsoft Passport Container service failed to start due to the following error: The service did not start due to a logon failure.

More replies
Relevance 100%
Preferred Solution: Event ID 7000 and 7038 on Shutdown

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 68.88%

Hi,
keep getting the errors above every startup regarding;
11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.
Context: Application, SystemIndex Catalog
Details:
(HRESULT : 0x80004005) (0x80004005)"
I have 3 admin user profiles.
Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch event viewer or mouse customisation softwares, they freeze temporarily and ... Read more

Answer:Windows 7: Event errors (11, 7000, 7026), intellipoint and event viewer freeze.

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

7 more replies
Relevance 68.47%

Hi,

keep getting the errors above every startup regarding;

11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.

Context: Application, SystemIndex Catalog

Details:
(HRESULT : 0x80004005) (0x80004005)"

I have 3 admin user profiles.

Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch ... Read more

Answer:Event errors (11, 7000, 7026), intellipoint and event viewer freeze.

Hiya and welcome to SevenForums!
Please contact an admin to move this thread, because this isn't the appropriate section for these kinds of problems.

4 more replies
Relevance 68.47%

Hi,

keep getting the errors above every startup regarding;

11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.

Context: Application, SystemIndex Catalog

Details:
(HRESULT : 0x80004005) (0x80004005)"

I have 3 admin user profiles.

Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch ... Read more

More replies
Relevance 68.47%

Out of the blue I get 3 event errors when I boot up my Home Premium 64 bit. First time in two years.

Event ID 7006:
The ScRegSetValueExW call failed for FailureActions with the following error:
Access is denied.

I don't have AVG. I have Agnitum Firewall, Panda Antivirus (Free).

Event ID 7009:

A timeout was reached (30000 milliseconds) while waiting for the IPsec Policy Agent service to connect.

Event ID 7000:

The IPsec Policy Agent service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.

When I checked the windows services table, I noticed that IPsec has in fact been started but probably not in a timely fashion. How do I get rid of these 3 annoying errors although I don't notice any performance problems in my laptop?

Thanks in advance for your help.

Answer:Three event errors on bootup: Event ID 7006, 7000 and 7009

Hi Atom.

"Event ID 7006:
The ScRegSetValueExW call failed for FailureActions with the following error:
Access is denied."

These events are normal because of Panda Cloud Antivirus' self-protection feature.

"Event ID 7009:

A timeout was reached (30000 milliseconds) while waiting for the IPsec Policy Agent service to connect."

Follow the instructions from here:

Event ID 7009 — Basic Service Operations

You can put new value as 60000 instead of 30000.

The Event ID 7000 should disappear when you boot your laptop next time.

Hope this helps.

1 more replies
Relevance 67.65%

I know there are threads about event 10016 and i tried everything i could, also grant permission to local authority NT through launch and activation permissions but it didn't work i still got the same error sometimes when i something stops working and the screen freezes a bit after that it turned into bsod; and I also got error irql but the most frequently happens is kernel T_T please help me. Below is the details of the two events:

Log Name: SystemSource: Microsoft-Windows-DistributedCOMDate: 21/05/2017 18:00:01Event ID: 10016Task Category: NoneLevel: ErrorKeywords: ClassicUser: LOCAL SERVICEComputer: DESKTOP-UHOC5VKDescription:The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID {6B3B8D23-FA8D-40B9-8DBD-B950333E2C52} and APPID {4839DDB7-58C2-48F5-8283-E1D1807D0D7D} to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" /> <EventID Qualifiers="0">10016</EventID> <... Read more

Answer:BSOD Event ID 10016 ShellServiceHost and event 7000 !!!

Not sure if it will help your BSOD, but the following should stop the Event ID 7000 and if I remember correctly the Event ID 10016.

Open Command Prompt as Admin
sc config CldFlt start= disabled

1 more replies
Relevance 61.09%
Question: Event ID 7000

I've been trying to find out what has been causing these two error messages in my event log at the start up. It is and event id of 7000 with a description of :

"The osanbm service failed to start due to the following error:
The system cannot find the file specified."

Along with a second error: event id 700 and a source of service control manager

"The osaio service failed to start due to the following error:
The system cannot find the file specified. "

I have recently mapped a network drive that i have to use a vpn connection to access. I am wondering if it is related to that and at the start up the system is trying to access the drive and it can't. I have also went through some of the services and disabled them to improve performance and such based on some google searches. I tried google searching these errors with no helpful information.
 

Answer:Event ID 7000

Do you have activesync installed?
 

2 more replies
Relevance 61.09%

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Date: 10/17/2004
Time: 9:32:40 PM
User: N/A
Computer: TEZUKA
Description:
The WinFast TV2000 XP WDM TVTuner service failed to start due to the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

anyone got this error or similar, i get it in the event viewer, in system.
i can't seem to find out which of the service is causing this.
 

Answer:Event ID: 7000. plz help

http://support.microsoft.com/default.aspx?scid=kb;en-us;314357&Product=winxp
 

2 more replies
Relevance 60.27%

wondering if any of you can clue me where to start looking for a cause of a LOT of repetitive errors, seemingly coming at the tick of the clock - in other words the system is generating the same error dozens of times per second. All of the errors I've looked at so far, with just a few exceptions [about as many as on a "healthy" windows 8 system] seem to be Event ID 7000. These errors go back to mid-February and have continued until now. The system would run, but slow. Checking install log, back in February, Silverlight plus C++ runtime were installed. nothing else. I don't know if that is related to the errors, but it is what it is.

Secondly: from what I have read here and many other places around the web the Windows 8.1 'refresh' function is not advisable. what I see is that it provides no assurance of a clean install, can damage apps and files, and the user applications, customizations, personalizations will need to be reinstalled. to me, that sounds like a leading indicator for doing a clean install period, from scratch. correct?

thank you
c

Answer:Thousands of Event ID 7000 ???

p.s. the system is a lenovo Z510, win 8.1 pro, x64. malware free.

4 more replies
Relevance 60.27%

i keep getting this whenever i restart my computer

"The npkcrypt service failed to start due to the following error:
The system cannot find the path specified. "
How do i get that to stop appearing on my event viewer?

here is my log
Logfile of Trend Micro HijackThis v2.0.0 (BETA)
Scan saved at 4:44:15 PM, on 10/5/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Executive Software\Diskeeper\DkService.exe
C:\WINDOWS\system32\HPZipm12.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\UPHClean\uphclean.exe
C:\WINDOWS\system32\MsPMSPSv.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\PROGRA~1\AVG\AVG8\avgtray.exe
C:\Program Files\RivaTuner v2.0 Final Release\RivaTuner.exe
C:\PROGRA~1\PANICW~1\POP-UP~1\PSFree.exe
C:\PROGRA~1\AVG\AVG8\avgemc.exe
C:\Documents and Settings\Ken Nguyen\Desktop\Shortcuts\utorrent.exe
C:\Documents and Settings\Ken Nguyen\Local Settings\Application Data\Google\Update\GoogleUpdate.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\mmc.exe
H:\Useful Programs\HiJackThis_v2.exe

R0 - HKCU\Software\Microsoft\Inte... Read more

More replies
Relevance 60.27%

I just did a windows 10 install, when I got done I had this errors. Event ID 37 (This one was showing up twice) Event ID 7000...
If your sick of seeing them here you go. This cleared both errors for me...
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\WMI\Autologger\EventLog-Application\{f1ef270a-0d32-4352-ba52-dbab41e1d859} and modify the "Enabled" value (on the right pane) from 1 to 0.
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\CldFlt and change where it says "Start" from the default value of 2 change it to 3 (Manual) or 4 (disabled) [I choose 3] Changed to 3

More replies
Relevance 59.86%

Computer freezes, often when typing an email or when computer goes into screen saver mode.Windows XPHave followed the sequences from the service log, and the most frequently logged as 'Error' under the Service Control Manager is 7000, User N/A. This happens every time the PC freezes. Others, just before shutting down are Event 7011; and there's been one logged as Print Error, Event 19. There are also Warning messages ref W32 Time, code 36.

Answer:Crashing - Event 7000, 7011

for the time problem double click your clock bottom right,click internet time and update now and see if that stops the warning messages

9 more replies
Relevance 59.86%

Anyone know how to fix this one?

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Date: 3/6/2007
Time: 4:04:16 PM
User: N/A
Computer: COMPUTER
Description:
The MSF32 service failed to start due to the following error:
The system cannot find the path specified.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.Click to expand...

Thanks
 

More replies
Relevance 59.86%

Hello,Since maybe a month now my computer has been regularly freezing at random moments with no sign of any problems. Other than this one problem my computer is one of the fastest i've ever had :P. Therefore, I checked to see what was going on and my Event Viewer told me that i was having a SCM error. I did a sc query for the specific driver and got this:SERVICE_NAME: WinDriver TYPE : 1 KERNEL_DRIVER STATE : 1 STOPPED WIN32_EXIT_CODE : 2 (0x2) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0I went on Kernel's website to see whether or not I could find driver update to solve the problem but i have no idea first of all which one to get and secondly where to download it. Therefore, i am seeking expert help. Does anyone know how to resolve my solution? And also how to stop my computer from freezing?TIA

Answer:Event ID: 7000 Computer freezing?

If this began happening suddenly, I would first try a system restore to a date before the problem started. I would then follow this by a scan with Malwarebytes to see if the cause is from that area.If this is a relatively new computer that came with Windows 7, then I would recommend going only to the manufacturer's site for drivers if you feel that is the problem. If you have not made any major hardware changes, then I would say to go ahead and update all available drivers for your operating system and model number.You have to be a little bit crazy to keep you from going insane.If all else fails, read instructions.

3 more replies
Relevance 59.04%

Hi all,

I've just built an AcerPower F6 desktop to Win 7 Pro 32 every shutdown it shows BSOD and promptly restarts.

Event log is showing me the following for a critical event at the same time the shutdown occurs (The date on the log is from a week ago but this happens every shutdown which is once every weekday):

Log Name: System
Source: Microsoft-Windows-Kernel-Processor-Power
Date: 14/03/2014 13:19:19
Event ID: 6
Task Category: (6)
Level: Error
Keywords:
User: SYSTEM
Computer: CUR-ICT-01.LODGEFARM.LOCAL
Description:
Some processor performance power management features have been disabled due to a known firmware problem. Check with the computer manufacturer for updated firmware.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Processor-Power" Guid="{0F67E49F-FE51-4E9F-B490-6F2948CC6027}" />
<EventID>6</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>6</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-03-14T13:19:19.519629700Z" />
<EventRecordID>5118</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="52" />
<Channel>System</Channel>
<Computer>CUR-ICT-01.LODGEFARM.LOCAL</Computer>
<Security UserID="S-1-5-18" /&g... Read more

Answer:BSOD on Shutdown Event Log = Kernel-Processor-Power. Event ID: 6

Your NI Measurement Studio driver appears to be causing problems.


Code:
Probably caused by : NIPALK.sys
It's outdated by 11 years, if you wish to keep the program I suggest you update the driver.


Code:
88a32000 88aab000 NIPALK T (no symbols)
Loaded symbol image file: NIPALK.sys
Image path: \SystemRoot\System32\Drivers\NIPALK.sys
Image name: NIPALK.sys
Timestamp: Mon May 12 22:21:05 2003 (3EC01041)
CheckSum: 0007ACFC
ImageSize: 00079000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please remove it or update it from the following link.

NI Measurement Studio - National Instruments

EDIT, there is a fix you can download which prevents file corruption, if you can't find an updated driver then download this.

http://digital.ni.com/public.nsf/web...C?OpenDocument

3 more replies
Relevance 59.04%

I was just checking in Event Viewer today, and there are some errors detailed as;

ID 7000 Service Control Manager Event service start failed Parallel Port driver service failed to start .. blah blah .. either because it not been enabled or it has been disabled (or words to that effect)

Truth is, im not getting any effects really, but I would like to know what this is, and how to get around it.

Answer:Event Id 7000 Service Control Manager

Do you have any hardware, i.e. printer, using the parallel port?

5 more replies
Relevance 59.04%

Since the upgrade to WIN 10 from WIN 7, I have continually gotten these errors following a BSOD. I am not 100% sure what to do to "fix" these errors since they happen quite frequently, sometimes 2 or 3 times a day sometimes things will be fine a a week or so.
Under the Event Viewer, Windows Logs, System it shows a total of 4,698 errors I have only been focusing on the red ones which are 7001, 7000 and 1000.
Error code for 7001 - The NetTcpActivator service depends on the NetTcpPortSharing service which failed to start because of the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
Error code for 7000- The VBoxAswDrv service failed to start due to the following error: The system cannot find the path specified.
Error code for 1000 - The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0x0000000000000010, 0x0000000000000002, 0x0000000000000001, 0xfffff803218db924). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 139d5ded-2b48-43e5-96cc-1fa3e6a87d06.

Also I keep getting an error related to Kernel PnP, I have no idea how to even approach that:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />
<EventID>219</EventID>
<Version>0</Version>
<Level>... Read more

Answer:Event ID's associated to BSOD 7001, 7000 & 1000

Hi stacchz,

Welcome to the 10forums

Please note, only the red onces in the event logs are errors, any others are information event logs.

For the 7001 event, I would suggest to create a new thread at the General Support forum.
In the BSOD Crashes and Debugging forum we focus on BSODs only, rarely do we also handle restart/shutdown/freeze crashes but usually only when they are mixed with BSODs.

For the 7000 event, the driver 'VBoxAswDrv.sys' is from Avast. I would suggest to download the Avast uninstall tool to get rid if left behinds Avast Uninstall Utility | Download aswClear for Avast Removal

For the BSOD event, the last one was on the 22th of previous month, unless you experience new BSODs anytime soon I do not see a reason to worry about it

11 more replies
Relevance 59.04%

I am getting a PC Restart everytime using my KVM Switch. I have 4 PCs connected to the Trendnet USB KVW with audio. None of the other computers restart when i change the KVM port. When i go to Event Viewer i get the following error:Event Type: ErrorEvent Source: Service Control ManagerEvent Category: NoneEvent ID: 7000Date: 18/11/2008Time: 10:35:35User: N/AComputer: HOME-PCDescription:The FDGuard service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion. For more information, see Help and Support Center at click here.And thisEvent Type: ErrorEvent Source: Service Control ManagerEvent Category: NoneEvent ID: 7009Date: 18/11/2008Time: 10:35:35User: N/AComputer: HOME-PCDescription:Timeout (30000 milliseconds) waiting for the FDGuard service to connect.For more information, see Help and Support Center at click here.And Finall ThisEvent Type: ErrorEvent Source: Service Control ManagerEvent Category: NoneEvent ID: 7000Date: 18/11/2008Time: 10:35:35User: N/AComputer: HOME-PCDescription:The Auto-Cleaner Plus AV service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion. For more information, see Help and Support Center at click here.Always when the above events happen i also get Event ID 18 which is to do with Bluetooth USB Adaptor:Event Type: WarningEvent Source: BTHUSBEvent Category: NoneEvent ID: 18Date: 18/11/2008Time: 10:33:58User: N/... Read more

Answer:Service Control Manager Event ID 7000

click here

1 more replies
Relevance 59.04%

what does this mean and how do i get it to stop...?

Event Type: Error
Event Source: Service Control Manager

Description:
The Creative Service for CDROM Access service failed to start due to the following error:
The system cannot find the file specified.
 

Answer:2000 event viewer error 7000?

I would try deleting the CD player from devices and reboot and reinstall the CD drivers. Sounds like one of the files is corrupt or missing.
 

3 more replies
Relevance 59.04%

Since the upgrade to WIN 10 from WIN 7, I have continually gotten these errors following a BSOD. I am not 100% sure what to do to "fix" these errors since they happen quite frequently, sometimes 2 or 3 times a day sometimes things will be fine a a week or so.
Under the Event Viewer, Windows Logs, System it shows a total of 4,698 errors I have only been focusing on the red ones which are 7001, 7000 and 1000.
Error code for 7001 - The NetTcpActivator service depends on the NetTcpPortSharing service which failed to start because of the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
Error code for 7000- The VBoxAswDrv service failed to start due to the following error: The system cannot find the path specified.
Error code for 1000 - The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0x0000000000000010, 0x0000000000000002, 0x0000000000000001, 0xfffff803218db924). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 139d5ded-2b48-43e5-96cc-1fa3e6a87d06.

Also I keep getting an error related to Kernel PnP, I have no idea how to even approach that:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />
<EventID>219</EventID>
<Version>0</Version>
<Level>... Read more

More replies
Relevance 59.04%

Hi, I am receiving this error at every boot:
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Date: 10/30/2008
Time: 9:38:08 PM
User: N/A
Computer: PRESARIOXPP
Description:
The PCASp50 NDIS Protocol Driver service failed to start due to the following error:
The system cannot find the file specified.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

I searched my hard drive for the file PCASp50.sys, but it is not present. The registry indicates the service is installed but shows INITSTARTFAILED with value 1 under HKEY_LOCAL_MACHINE/SYSTEM/CurrentContolSet/Services/PCASp50/Enum

I don't know what service this is, or if some driver/software was uninstalled that created it. I looked on my notebook that has windows xp home installed about the same time as my desktop, but can't find the file and the service is not listed in the registry as on my desktop.

Any help would sure be appreciated!

Thanks!

Answer:Service Control Manager event 7000

anyone?

3 more replies
Relevance 59.04%

Hi there.  I have a Lenovo SL500 with XP Pro.  For quite a while, the laptop would take anywhere from 6 to 8 minutes to boot up completely.  I did all sorts of diagnostics, cleaning, antivirus, memory tests and replaced the hard drive with an sshd hoping that would help solve some of the boot time issues.
 
Long story short, I decided to check the event viewer for any possible issues and noted a few errors that would occur at startup.  I was able to fix all of the errors except one and now my boot up time is down to about 2 1/2 minutes.
 
I can't figure this one out:
 

 
 
The SC0CLPT service failed to start due to the following error:
The system cannot find the device specified.
 
How can I determine what device the system can't find so I can clear this error?
 
Thanks in advance.
Alex
 

Answer:Event ID: 7000 - SC0CLPT Service issue

http://www.runscanner.net/lib/SC0CLPT.SYS.html
 
http://www.herdprotect.com/sc0clpt.sys-3c5b66fb5fce1165a7adb3cc1f0ea0204276cbb0.aspx
 
If you want my advice, which doesn't neccessarily chime with the other guys here:
 
In the short term... Using, or used anything by Sharp? If so, sounds like a reinstall/repair of the program might help.
Otherwise, I would look in Administrative tools/services, to see if such entry exists and set to disable.
 
Copy the following into notepad and save with ".bat" as the file extention.
 
set devmgr_show_nonpresent_devices=1
devmgmt.msc
 
Double click. When device manager  opens, select the view menu item, show hidden files. Extend 'non plug and play. See anything similar?

4 more replies
Relevance 58.63%

Hello There.

I have recently taken my machine back to factory settings due to serious BSOD issues (hal.dll problems). I have been watching the event viewer while loading up files, programs and surfing the net. I have noticed very regulary that I am getting the error: "The regi service failed to start due to the following error: Cannot create a file when that file already exists."
Can someone help me isolate what is causing this error? I believe it is in part responsible for my latest BSOD after the factory reset:confused

I am currently running a Toshiba Qosmio I7 with w7 x64
 

Answer:Service Control Manager Error, Event ID 7000

If you have some recent minidump files in Windows\Minidump, copy them to your Desktop, zip then upload the resulting zip file. I'll try to debug them to gain further insight into the problem.
 

11 more replies
Relevance 58.63%

Hello there I am new here but I have this event viewer ERROR.

The IOMap service failed to start due to the following error:
The system cannot find the file specified. Event ID 7000

My PC SPECS:

MB: Asus P9X99 Deluxe II
CPU: Intel I7 6950X
GPU: Titan X Pascal
PSU: Corsair 1200i
RAM: Corsair DDR 4 128GB

OS: Windows 10 PRO 64bit

I do not even know if you need these PC specs to solve this problem but I am giving them anyways.

I also use a switch and a synology NAS. I think that is about it.

I would be very very greatfull if anyone could help me to solve this error. I am not very advanced in these things so if you could be very specific that would be great.

Answer:EVENT ID 7000 The IOMap service failed to start

Welcome to the TenForums @Romas

Could you post the message you get. The important element is the file name and location that Windows is using.

When the meassge appears use ALt + Prt Screen to capture. Paste into Paint, save and post.

If you could do the same with the info related to this even t in Event Viewer.
Ken

26 more replies
Relevance 58.63%

I keep getting this error on a Windows 2000 machine and have no idea what service this is referring to:

the msko8u2c service failed to start due to the following error: The system cannot find the file specified.

any help would be appreciated.
thanks
 

Answer:service control manager event 7000 error

Malware is notorious for generating 8 alpha-numeric files.
I suspect you either have or had malware and the "msko8u2c" file is part of this.
Start here http://forums.majorgeeks.com/showthread.php?t=35407
read and do what it says.
If you get stuck on any step, post in the malware forum http://forums.majorgeeks.com/forumdisplay.php?f=35 in a new thread.
Start by telling the original problem, what you've done to clean up your computer and where if at any step you got stuck.
 

1 more replies
Relevance 58.63%

Just upgraded to newest version 9.1.007.0002.
 

Answer:Errors; ID Event 7000 & 7009 - ZoneAlarm Free

Alrighty. Whats the question? Its obviously not working

If you reinstall the old version does it work?
 

4 more replies
Relevance 58.63%

Gateway 1.4GHz centrino M laptop
XP Pro w/ all updates

After windows is started up, it takes ~2.5 minutes for this error to finish timing out or whatever.. before which none of the network icons will show up in the systray

I can give a complete list of what services and startup programs are happening if need be.
Only startup 'program' is KernelFaultCheck 'C:\Windows\system32\dumprep.exe 0 -k'

Any suggestions? I removed the 'parallel port' thing in device manager that was giving me a yellow triangle with exclamation point and that didn't fix.

The Parallel port driver serice failed to start due to the following error:
The service cannot be started, either because it is disabled or becasue it has no enabled devices associated with it.

Error - Event ID: 7000

TIA - josh
 

Answer:Event ID: 7000 Parallel Port Driver Service...

Any other hardware hooked to the machine at one point? Parallel port printer (especially HP or Lexmark) or scanner? Zip drive? Tape backup? Any OEM hardware of any type? Anything you can think of? Also, keep in mind that some USB devices will install a "soft" parallel port (for lack of better term) that can cause the same issues.

By the way it sounds, I would guess that something that was installed at some point is now no longer there and the software that was left behind is looking for the device. HP All-in-One devices were bad about this a while back (not sure anymore).

You also mentioned that you took out the 'parallel port thing' in device manager. Was it, in fact, the parallel port itself or was it some other device maybe listed under the Ports heading?

It also mentions a service failed to start. Take a look at the event logs (control panel -> administrative tools -> event viewer, under application) and see if you can find from there the service that is failing. Then you can look into services that are running on startup through start -> run -> services.msc. If it is there, you can stop it (be very careful about services that you arbitrarily stop; for more info, consult GrenME).

On the other hand, you may just be having a problem with the port itself and as long as it isn't being used, you should be able to disable it in the BIOS.

Cheers.
 

1 more replies
Relevance 57.81%

First and foremost, I'm not exactly a computer whiz about this stuff, so forgive my slowness.

So the situation played out like this. For months now, the computer I have would just completely freeze at random moments in time, forcing us having to shut it off and turn it back on again. However, as I've said, the times are completely random, for it would work for about four hours, but then freeze. Or it could freeze five minutes into turning it back on.

Another error I believe is relating to this would have to be that the memory usage claims that it's almost all used up or something like that, and it would warn me about it, despite having installed two drives of memory recently in hopes it stops the problem.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Athlon(tm) XP 3000+, x86 Family 6 Model 10 Stepping 0
Processor Count: 1
RAM: 959 Mb
Graphics Card: VIA/S3G UniChrome IGP, 64 Mb
Hard Drives: C: Total - 40782 MB, Free - 19799 MB; D: Total - 33032 MB, Free - 31427 MB; I: Total - 40625 MB, Free - 39848 MB;
Motherboard: ASUSTek Computer INC., Kelut
Antivirus: AVG Anti-Virus Free Edition 2012, Updated: Yes, On-Demand Scanner: Enabled

And looking at the event log, there are two noticeable errors that seem to show up after I turn the computer on. These event logs are described as 7000 + 7009, the source being from the Service Control Manager. Both errors are found together.
... Read more

Answer:Windows XP Pro: Complete Freeze + Event Errors 7000 + 7009

16 more replies
Relevance 57.4%

Greetings Gents


? Windows 7 ultimate
? x64
? it was vista upgraded to 7
? full retail version
? 2009
? 2010
? Intel(R) Core(TM)2 Quad CPU Q9100 @ 2.26GHz
? NVIDIA GeForce GTX 260M
? Alienware M17x
? FLEXTRONICS 19.5 v *12.3 a = 239.85 w

Summery:
out of sudden when i playing mkv or .avi media it stopped working and force me to total shutdown the system. To be precise, I never faced the BOSD; yet I know it the same/equivalent to it. I am seeking your help gents :D

kindly find the attached

thank you & your rapid response is highly appreciated.

Answer:BSOD - Event ID 6008 Previous Shutdown was Unexpected - need total shutdown

Hi -

Most of the 11 BSODs list NVIDIA video as the probable cause.

1. Update your NVIDIA video drivers -

Code:

nvlddmkm.sys Tue Mar 16 22:00:40 2010 (4BA037C8)
nvBridge.kmd Tue Mar 16 21:31:37 2010 (4BA030F9)

NVIDIA --> http://www.nvidia.com/Download/index.aspx?lang=en-us

One of the BSODs had a bugcheck = 0x124 = WHEA = Windows Hardware Error Architecture - potential hardware failure

Info on 0x124 --> http://www.sevenforums.com/crash-loc...-what-try.html

2. Remove Daemon Tools/ Alcohol 120. A driver common to both sptd.sys is known to cause BSODs.

3. Update your ESET installation to v4.2.64.12 --> http://www.eset.com/download

You need device driver updates. Alienware Support sends me to Dell Support -

http://support.dell.com/support/down...nConsent=False

4. Update all device drivers - chipset (NVIDIA & Ricoh), audio, network. DO NOT download the NVIDIA Video driver from Dell - go to NVIDIA Support per step #1 above.

Windbg Logs
--> http://jcgriff2.com/dbug_logs/_99-db..._jcgriff2_.txt
--> http://jcgriff2.com/dbug_logs/_99-db...riff2_.txt.zip


If BSODs persist after driver updates, run the Driver Verifier --> http://jcgriff2.com/driver_verifier.htm

Regards. . .

jcgriff2

`


BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Aug 17 21:36:50.639 2010 (GMT-4)
System Uptime: 0 days 3:49:08.761
*** WARNING: Unable to verify tim... Read more

2 more replies
Relevance 53.3%
Question: Advent 7038

Hi
On my Advent 7038 I have 2 memory slots for so-dim - 2700 with a total of 512 meg 333mghz ram (I think) but I can only see 1 when I open the plate on the base. Can any one tell me where han how to get to the second. I would like to up the memory to one gig
willie
 

Answer:Advent 7038

How much ram do you currently have on your laptop? It seems that you have already opened the back of the laptop, is there a spare slot there for you to add more RAM?

By the way it might be a good idea to ring the *****s at Advent to check what RAM your Laptop supports and the maximum amount of RAM it can take also.

ps
Never buy an Advent Laptop or PC or buy from PC World!!! They are absolutly useless. A friend of mine bought a pc worth 1000 and on top of that 250 gurantee pack. Its been 9 months and they stil havent solved the problem he has wth his system!!!

Give your laptop back to them and look on the net for a better system for a cheaper price Check the folowing site out for high performance system.

www.alienware.co.uk

there are many other reputable sites on the net also.
 

9 more replies
Relevance 53.3%
Question: Advent 7038

I cant seem to get my laptop to pick up my wireless network it works with a freinds laptop is there a way to activate my laptops built in wireless card
 

Answer:Advent 7038

Wireless

Are you still getting a harware is still swiched off?
Hold down Control and press F2

Willie
 

1 more replies
Relevance 52.48%

I receive this error message in the Windows System log regularly. Device Manager does not show any malfunctioning devices.

Apparently csvol service is part of HFS+ for Windows. This is a program that allows reading of HFS+ file systems on Windows. I did install that.

And I believe these Event ID 7000 errors are related to a service failing to start. maxView Storage Manager Agent service will not start. It is set to 'automatic start' in the Services viewer app. However, I find that it is not started, and if I attempt to start it manually, I receive a message stating it started and then stopped, "Some services stop automatically if they are not in use by other services or programs." That should not be the case with this service.

I'd greatly appreciate any help with this!
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />

<EventID Qualifiers="49152">7000</EventID>

<Version>0</Version>

<Level>2</Level>

<Task>0</Task>

<Opcode>0</Opcode>

<Keywords>0x8080000000000000</Keywords>

<TimeCreated SystemTime="2016-06-19T01:55:30.224060300Z" />

<EventRecordID>33731</EventRecordID&g... Read more

More replies
Relevance 52.48%

I receive this error message in the Windows System log regularly. Device Manager does not show any malfunctioning devices.

Apparently csvol service is part of HFS+ for Windows. This is a program that allows reading of HFS+ file systems on Windows. I did install that.

And I believe these Event ID 7000 errors are related to a service failing to start. maxView Storage Manager Agent service will not start. It is set to 'automatic start' in the Services viewer app. However, I find that it is not started, and if I attempt to start it manually, I receive a message stating it started and then stopped, "Some services stop automatically if they are not in use by other services or programs." That should not be the case with this service.

I'd greatly appreciate any help with this!
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />

<EventID Qualifiers="49152">7000</EventID>

<Version>0</Version>

<Level>2</Level>

<Task>0</Task>

<Opcode>0</Opcode>

<Keywords>0x8080000000000000</Keywords>

<TimeCreated SystemTime="2016-06-19T01:55:30.224060300Z" />

<EventRecordID>33731</EventRecordID&g... Read more

More replies
Relevance 52.48%

I have RODC in Perimeter network, i have configured one the SQL service account in RODC member servers but when i configure and start the service i am getting below error message, I know the work around to start service with NT AUTHORITY\Local service however
i have to configure domain account with secure manner, so i dont want to leave the SQL services runs with local service account, I am searching number of article but none can find all are saying configure with local service account which will work but thats
not my requirement

i tried using local account and domain account both are same,.

---------------------------
Services
---------------------------
Windows could not start the Application Experience service on Local Computer.
 
Error 1079: The account specified for this service is different from the account specified for other services running in the same process.


---------------------------
OK  

More replies
Relevance 52.07%

I can not install XP service pack 2 to the 7038, after about 30 minutes the messageis that there is no authorisation to continue. The computer is authorised. Any help appreciated.

Answer:Advent 7038 and XPservice pack 2

Copy the Service Pack to Desktop, Start in Safe Mode. Then double click the Setup file

2 more replies
Relevance 52.07%

I have had this Advent 7038 since January 2006 and use it quite successfully for about 3 years. It filled up with various programmes and files and slowed down to the point of being very frustrating so I bought another laptop wih a better spec. I now would like to use the Advent for one specific purpose and used the supplied system recovery disc to wipe the hard drive so I could start afresh. Having run the disc I now am at the black screen showing:- "NTLDR is compressed Press ctrl+alt+del to continue".
This takes me on a never ending loop and try as I may I cannot get out of it. I have tried all manner of combinations of ctrl+ or alt+ other keys to no avail. Does anyone out there have experience of this Advent model with Windows XP Home Edition. The only recovery disc I have is the one that came with the laptop (one disc only). The instruction book aludes to there being two discs but I have only the Advent System Recovery Disc.
 

More replies
Relevance 50.43%
Question: Shutdown Event

Hardware: IBMPentium(R) 4 CPU 2.6GH1.99 GHz1 GIG RAMXP HOME VERSION SP3Error message I keep getting: "Event provider attempted to register query "%1" whose target class "%2" does not exist.  The query will be ignored."Explanation: "An erroneous dependcey for the class in the query no longer exists, a missing class definition."This has occurred with Firefox crashing, Internet Explorer crashing (not as often), other programs.  After rebooting, it usually runs a checkdisk and reinstates "orphan" files, or repairs corrupt files.In the viewer logs AVG anti-virus keep popping up prior to a shutdown event and I've heard somewhere that it's no longer recommended.  I know that every time I come back from the reboot, AVG needs another complete update.  It's as if information is being wiped out, so that computer can't make the connection and crashes.The User Action says: 1. Compile the definition for the target class into the WMI repository by compiling the class povider mof file.2. Reinstall the program.  Relevant mof files are automatically complied when a program is reinstalled.This is obvious being managed by the Windows Management (Inventory?)Anyhow, I don't know what an mof file is.  If it's AVG that's causing this, or it's a clash with other programs, maybe that's it.  I have some freeware: Spyware Guard, Spybot Search & Destroy, Spyware Blaster, F... Read more

Answer:Shutdown Event

I think your regisrty is locked so AVG can't complete a update. It sounds like it deleted or uninstalled some files and you regisrty is still pointing to them.Spybot Search & Destroy locks the regisrty. You can try to uninstall it and than try to run the update for AVG to see if it takes. If not than uninstall it and do a reinstall.Let us know how you make out.

3 more replies
Relevance 49.61%

Fingerprint Driver (5.9.5.7038) error cause BSOD on native UEFI Win7x64.It occurs randomly when I use the Internet Explorer 9.0.0.4.I found the following informations concerned about this problem from "eventvwr.msc"=========================================================- [Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"][System]ProviderName: "Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}"EventID: 41Version: 2Level: 1Task: 63Opcode: 0Keywords: 0x8000000000000002SystemTimeCreated: "2012-01-04T08:01:31.820825200Z"EventRecordID: 86959[Correlation]Execution ProcessID="4" ThreadID="8"Channel SystemComputer ShikiSuen-6iSecurity UserID="S-1-5-18" [EventData]Data Name="BugcheckCode" 197Data Name="BugcheckParameter1" 0x7255Data Name="BugcheckParameter2" 0x2Data Name="BugcheckParameter3" 0x0Data Name="BugcheckParameter4" 0xfffff80005fb3dd3Data Name="SleepInProgress" falseData Name="PowerButtonTimestamp" 0  ============================================================- [Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"][System]ProviderName: "Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}"EventID: 3Version: 0Level: 2Task: 2Opcode: 14Keywords: 0x8000000000000010SystemTimeCreated: "2012-01-04T08:01:34.769230400Z"EventRecordID: 406[Correlation]Execution ProcessID="4" ThreadID="172"Channel Microsoft-Windows-Kernel-EventTracing/AdminComputer ShikiSuen-6iSecurity ... Read more

Answer:Fingerprint Driver (5.9.5.7038) error cause BSOD on native UEFI Win7x64.

Strange, it works on my device, but i have different version of IE 9, i have 9.0.8112.16421 and i use Password Manager 4 Beta, not CSS. Fingerprint version is same, as well as UEFI and Win7x64.





----------------------------------------------------Lenovo T440s, 20AQ0067MC, Windows 8.1 Pro x64 UEFI, Samsung 840 EVO SSD 250 GB, 8 GB RAMLenovo T430s, 2356LQG, Windows 8.1 Pro x64 UEFI, Intel 520 SSD 180 GB, 8 GB RAMLenovo T420s, 4171-6SG, Windows 8 Pro x64 UEFI, Intel 320 SSD 120 GB, 8 GB RAMLenovo T400s, 2808-CYG, Windows 7 Ultimate x64

4 more replies
Relevance 49.61%

Hello, I have an x61s running Windows Vista business (32 bit).  I'd like to be able to close the lid while the system is shutting down. That is I initiate a shutdown by selecting "shut down" from the Windows Start menu, and then I close the lid of the notebook, without waiting for the sutdown to complete. Problem is that closing the lid makes the notebook go into sleep mode, even if a shutdown has already been initiated. Does anyone know how I can avoid this, so that the system will continue to shut down even though the lid is closed in the process? That would be most useful, because when I decide to shut down my computer, I want to close the lid immediately.  However, if I close the lid during regular operation (not in a shut down scenario), then I don't want the system to shut down; In this case the system going to sleep following the lid close event is fine. I tried setting a "Lid closed action delay" of 2 minutes (in power manager, global power settings, advanced settings for the "lid closed" event), but this does not seem to work, the system still goes to sleep immediately after I close the lid.Message Edited by astra4 on 12-17-2008 08:22 PM

More replies
Relevance 49.61%

My 3 week old HP laptop is booting up and shutting down very slowly.Have tried all the usual cleanups and start up program disable stuff but it's as slow as ever. It's got AMD Turion x2 cpu and 2gb Ram surely it shouldn't be this slow?Anybody any idea? Event log keeps coming up with event log 100 on start up and event log 200 on shutdown stating both these processes are taking too long, but how do i fix it???

More replies
Relevance 49.61%

Several times over the last few weeks, I noticed that my computer (Dell Optiplex 9020) had rebooted while left on overnight. Then today, without warning, the light blue (not BSOD) WIn 10 Restarting screen appeared while I was doing something noninvasive, like checking email. Then the system rebooted.

The event viewer offered the following clues:

Event ID 109
The kernel power manager has initiated a shutdown transition.
Shutdown Reason: Kernel AP

Event ID 1074
The process C:\WINDOWS\system32\winlogon.exe (MARK-9020) has initiated the restart of computer MARK-9020 on behalf of user NT AUTHORITY\SYSTEM for the following reason: No title for this reason could be found
Reason Code: 0x500ff
Shutdown Type: restart
Comment:
I would be very grateful to hear back from members who have solved this problem.
Thanks!

More replies
Relevance 49.61%

Several times over the last few weeks, I noticed that my computer (Dell Optiplex 9020) had rebooted while left on overnight. Then today, without warning, the light blue (not BSOD) WIn 10 Restarting screen appeared while I was doing something noninvasive, like checking email. Then the system rebooted.

The event viewer offered the following clues:

Event ID 109
The kernel power manager has initiated a shutdown transition.
Shutdown Reason: Kernel AP

Event ID 1074
The process C:\WINDOWS\system32\winlogon.exe (MARK-9020) has initiated the restart of computer MARK-9020 on behalf of user NT AUTHORITY\SYSTEM for the following reason: No title for this reason could be found
Reason Code: 0x500ff
Shutdown Type: restart
Comment:
I would be very grateful to hear back from members who have solved this problem.
Thanks!

More replies
Relevance 49.61%

I boot system. I sign in.....system shuts down all by itself. When I re-boot it tells me it failed to to "Thermal Event" and tells to be F1 to continues.

What is "Thermal Event"?

Answer:Thermal Event Shutdown

Hello,

It basically means that your system overheated and shut itself down so as not to damage any components.
Reasons for this range from dust on the heatsink or a fan not spinning to heatsink not being seated correctly.

What is the make/specifications of the system and roughly how old is it?

3 more replies
Relevance 49.61%

Several times over the last few weeks, I noticed that my computer (Dell Optiplex 9020) had rebooted while left on overnight. Then today, without warning, the light blue (not BSOD) WIn 10 Restarting screen appeared while I was doing something noninvasive, like checking email. Then the system rebooted.

The event viewer offered the following clues:

Event ID 109
The kernel power manager has initiated a shutdown transition.
Shutdown Reason: Kernel AP

Event ID 1074
The process C:\WINDOWS\system32\winlogon.exe (MARK-9020) has initiated the restart of computer MARK-9020 on behalf of user NT AUTHORITY\SYSTEM for the following reason: No title for this reason could be found
Reason Code: 0x500ff
Shutdown Type: restart
Comment:
I would be very grateful to hear back from members who have solved this problem.
Thanks!

More replies
Relevance 49.61%

.Windows 7 Ultimate
.64 bit
.Original System installed windows 7 home premim
.Came pre installed but upgraded to ultimate
.System hardware age? I bought this new 4 months ago yes reinstalled os from factory defaults using recover OEM windows & then upgraded with anytime upgrade to Ultimate

CPU AMD 1000 mhz X 2
Motherboard?
Power Supply?

Toshiba
Model Number C655D-S5200

Answer:Event ID 41 system shutdown

Hi -

No BSOD dumps are present in the zip file.

When does the system shutdown, e.g., gaming, video, etc...?

Check temps - Speccy - FileHippo.com - Download Free Software

Be sure to keep the laptop elevated for airflow.

Have you contacted Toshiba Support?

Regards. . .

jcgriff2

`

3 more replies
Relevance 49.2%

This appears to be a general issue with windows 10, I always get the following errors on shutdown:

The VMware Workstation Server service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.

The User Data Access_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The User Data Storage_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The Contact Data_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The Sync Host_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

I suspect the Event ID 7031 Service Control Manager errors occurred initially in windows 8.1 upgrade and was resolved by Microsoft. It looks like the problem is back especially with the new windows 10 services (with the exception of the VMWare Workstation server)

I suspect this error also affects shutdown/reboot times.

Ideas anyone how to resolve this

More replies
Relevance 49.2%

I tend to run my computer 24/7, but within the last 3 days, I had my computer shutdown while I was away with an Event ID 109 with the following reason:






The kernel power manager has initiated a shutdown transition.

Shutdown Reason: Battery



Thing is, I am on a desktop computer, not a laptop with a UPS connected. And it is an APC UPS with Powerchute Personal Edition installed. Although this is a Windows 7 to Windows 10 upgrade with Powerchute Personal Already installed. Does anyone know of a reason why Kernel-Power is shutting my computer down for this battery reason?

Answer:Windows 10 Pro Desktop Shutdown with Event ID 109

Hi:

Until someone more expert arrives...

What does the PCPE dashboard tell you?
Are you hearing any beeps from the APC UPS?
How old is the APC UPS?
Are you sure everything is plugged in and working properly, including the data cable from the back of the PC tower to the UPS?

Reason for asking: I had a relatively new APC UPS fail after only a few months several months ago.
It was under warranty and, after calling Schneider Electric, they RMA'd the whole unit (not just the battery), no questions asked. They sent a brand new one in 2 days.
(After many years of using their products, this was a "first". But I was pleased to find that they took care of it with zero fuss. The only chore was having to haul the old unit to the UPS store for the return shipment.)
Just a thought.

MM

7 more replies
Relevance 49.2%

Windows 10 64 bit, latest version, is working fine on my Toshiba i7 laptop with 8 Gb ram. But I have problems with shutdowns when I click on restart. It seems to take far too long to shutdown. I am not sure how to find out why but when checking out the event viewer, I found several shutdown errors (some critical and some warnings). So I got the following screen shots (not sure how I got there) which seem to reveal several errors during shutdown. When I click on the web link I get a non working website.

Question:
1. How do I find out what is making shutdowns so slow when I click restart? (I "think" Shutdown seems faster if I just click on shutdown instead of restart)
2. What problem do these screenshots of error indicate and how do I fix them?
Thank you
Edit:
Got to those screens: Control Panel - Administrative Tools - Component services. Event viewer(Local) -Applications and Services Logs - Microsoft -Windows - Diagnostics Performance - Operational.

Here are some recent error screenshots which occur in both shutdown and bootups.
As can be seen this is a problem that goes back to 2016.

More replies
Relevance 49.2%

Hi there,

I have had this PC for about three months and this is something that happens about 3 times a week. I'll come into the room and try to get it out of sleep mode, and then realize it has shut down yet again. When I check the details, here's what I get. I'm not a computer technician but it would be great if someone could take a look at this and see if they can determine the cause.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8006E47060
BCP3: FFFFF80000B9C518
BCP4: FFFFFA8004DF4C10
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\040110-43680-01.dmp
C:\Users\Miseta\AppData\Local\Temp\WER-72649-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Answer:BlueScreen event and random shutdown

Hello Welcome to SF,

Please post us the Dump file http://www.sevenforums.com/crash-loc...d-problem.html

Good Luck,
Captain

5 more replies
Relevance 49.2%

I have been encountering slow shutdown times on my desktop recently. I looked in the event logs to try and find some clue but they were not that helpful to the less than technically minded

1: EVENT_TCPIP_TCP_CONNECT_LIMIT_REACHED
I had a lot of the above that were listed both as information and warning

2: also W32time came up several time as both info and warning

3: NetBT came up several times - with
"the name MSHOME could not be registered on the interface with IP address xxx, the machine with the ip address yyy did not allow the name to be claimed by this machine.

The only hardware I have installed recently is a Belkin wireless card (whose problems I have posted elsewhere ) This may have something to do with it but I am not sure. Briefly my setup is a wireless laptop (no problems) and a wired desktop (which has been re-configured to run on wireless)

I am running Windows XP pro with SP2 on an AMD system with 2 gigs ram

I have run several virus checks and I run spybot regularly, I have a belkin router to connect through to my blueyonder broadband.

Any advice?
 

Answer:XP very slow shutdown - event logs

13 more replies
Relevance 49.2%

I plug in a flashdrive, scan it, copy a few files, pull it out (it had 3 files on it, never have viruses. Never.). Windows suddenly decides to shutdown. Waited :30 sec, rebooted, logged in and went to Event Viewer>System and filter for 6008 events. Zero, no listings. Can't find anything in the past 20 minutes that looks like a shutdown.

What gives? How can Event Viewer not show the shutdown? How can I find out what the burp was? I've had no issues lately (since a new card in July), Windows has been flawless. I hate it when Windows does something like this and I can't track it down.
Thanks in advance for any interest,

Surviver

More replies
Relevance 49.2%

I am running Windows XP-Home. All of a sudden when I want to shut down my computer I get a box that comes up and it's for "shutdown event tracker". I never had that before and I would like to just be able to select either shutdown/restart/etc. not having to put in why I am shutting down.

What I read is that this was originally for Windows 2000 but in Windows XP this was shut-off. If that is so - why do I get that pop-up?

In the help area this is what I found:
"On Windows 2000 Server products, you will be prompted to supply information regarding why you are shutting down or restarting the computer. This feature is turned off in Windows XP."

How can I get this turned OFF?
 

Answer:Shutdown Event Tracker Question

How to enable and disable Shutdown Event Tracker
1.To open Registry Editor, click Start, click Run, type regedit, and then click OK.

2.In Registry Editor, navigate to the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Reliability

3.Name:ShutdownReasonUI
Type:REG_DWORD
Value:1=enable;0=disable
 

3 more replies
Relevance 49.2%

My currently up to date windows 10 pro machine has been restarting very very frequently after I've left it for a goodly while, including nearly every night, and in trying to figger out why this is happening, I learned about this option, Display Shutdown Event Tracker. It's supposed to be in the Local Group Policy editor, but I do NOT see an option named that. I'm an admin on my machine, so I'm not sure why I can't see it, unless it's not there any longer? Moved? Who knows? I did locate the .msc for GP, and ran it explicitly as an admin, but nada. Someone had mentioned looking at the user32 events in the regular event viewer, but this is all I see there:

"The process C:\Windows\System32\RuntimeBroker.exe (LAPTOPNAME) has initiated the restart of computer LAPTOPNAME on behalf of user LAPTOPNAME\MyUserName for the following reason: Other (Unplanned) Reason Code: 0x0 Shutdown Type: restart Comment:"

Any thoughts anyone?

TIA
elaine

More replies
Relevance 49.2%

Hey,

I recently had a random shutdown while using Google Chrome.

All I have is the minidump but no way to read it.

There seems to be no record of the crash in my event viewer.

I checked my ram, PS, HD and Gfx card and they all seem to be in working order.

This is a brand new rig that I built so I am thinking it's software related but I want to make sure.

What should my next step be?

Answer:Single Random Shutdown - No Event

Download BlueScreenView (in Zip file)No installation required.Unzip downloaded file and double click on BlueScreenView.exe file to run the program.When scanning is done, go Edit>Select All.Go File>Save Selected Items, and save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content, and paste it into your next reply.

34 more replies
Relevance 49.2%

I moved this post from general discussions where it got completely buried.

I'm sure every one of us is getting these errors in windows 10

This appears to be a general issue with windows 10, I always get the following errors on shutdown:

The VMware Workstation Server service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.

The User Data Access_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The User Data Storage_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The Contact Data_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The Sync Host_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

I suspect the Event ID 7031 Service Control Manager errors occurred initially in windows 8.1 upgrade and was resolved by Microsoft. It looks like the problem is back especially with the new windows 10 services (with the exception of the VMWare Workstation server)

I suspect this error also affects shutdown/reboot times.

Ideas anyone how to resolve this

Answer:Event Log 7031 Errors on Shutdown

getting this also - on laptop and home pc

1 more replies
Relevance 49.2%

Hello. First of all, I didn't know where to post this so I chose Win7 because it's what I use.

OK so this problem started about a month ago, but now it's becoming more frequent than ever. What happens is, as I'm chilling on my desktop PC, it just shuts down spontaneously, and here's the thing, since I don't have a restart button, I can't restart it, the monitor goes black (no BSOD) and even if I hold the power button too long, it won't shutdown. The only way to shut it down is to remove the power supply cord (which of course could lead to corrupted hardware, data loss, etc).

Now this mostly happens when I play games with high demanding hardware. So for this reason, I'm monitoring the CPU heat and it seems fine. Max temp goes to about 51C. OK I am now gonna post dxdiag info so you can examine all my PC specs, if you need anything else, just say so.

Thank you very much in advance!


Code:
------------------
System Information
------------------
Time of this report: 1/7/2011, 03:11:27
Machine name: TONI7
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: Packard Bell
System Model: ixtreme M5120
BIOS: Default System BIOS
Processor: AMD Phenom(tm) 9650 Quad-Core Processor (4 CPUs), ~2.3GHz
Memory: 8192MB RAM
Available OS Memory: 8192MB RAM
Page File: 1661MB used, 14719MB ava... Read more

Answer:Event ID 41 Error - Spontaneous Shutdown

Update Realtek HD audio drivers - http://sysnative.com/0x1/DriverRefer...l#RTKVHD64.sys

See if update available for NVIDIA GeForce GT 230 drivers - http://www.nvidia.com/Download/index.aspx?lang=en-us

" " Marvell Yukon 88E8071 PCI-E Gigabit Ethernet Controller - http://www.marvell.com/support.html

Try these 3 places for additional information -

1. WERCON -
START | type view | "View all Problem Reports" | 2x-click on line item for additional crash info

2. Reliability Monitor -
START | type perfmon /rel

3. Event Viewer -
START | type eventvwr.msc | Custom Views | Administrative Events

Regards. . .

jcgriff2

`

13 more replies
Relevance 48.79%

Hi, i have just done a fresh install of win 7 and all was normal for 7 days with no errors in the event log but now on every start up i get the above error in the event log and don,t know how to trace it.After hours of googling i came upon a thread where you had helped someone else with the same problem.Thanks in advance for any help you can lend me.  Regards mark

Answer:Event ID 6008 The previous shutdown was unexpected

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy,  taking care to post the link of the snapshot in your next post.
   Go to Piriform's website, and download the free version on the left.  Click Download from Piriform.com (the FileHippo link requires an extra click). Or if you want to use a portable version of Speccy (which doesn't require installation), click the builds page link and download the portable version. You will now be asked where you want to save the file. The best place to put it is the Desktop, as it will be easy to find later.
    After the file finishes downloading, you are ready to run Speccy. If you downloaded the installer, simply double-click on it and follow the prompts until installation is complete. If you downloaded the portable version, you will need to unzip it before use. Right-click the ZIP file and click Extract all. Click Next. Open up the extracted folder and double-click on Speccy.
 
     Once inside Speccy, it will look similar to this (with your computer's specifications, of course):
     Now, at the top, click File > Publish Snapshot. You will see the following prompt:
 &n... Read more

4 more replies
Relevance 48.79%

BACKGROUND:

I'm troubleshooting a critical error message I receive in the event log. It's the same as has been previously reported here. Prior to upgrading to Windows 10, my system was running Windows 7 Pro SP1. When running my previous OS (WIN 7) I rarely had errors listed in Event Viewer. Now after upgrading to Windows 10, I get errors/warnings I never used to get under Windows 7. I have performed a clean install of Win 10 and still am receiving error messages.

The error I would like help with today is of the "Critical" level in Event Viewer.

PROBLEM:

After doing a normal shutdown, and then booting my system, I check Event Viewer and always find the following critical error:

"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."

---------------------- START: Event Viewer XML error text ---------------------
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />

<EventID>41</EventID>

<Version>3</Version>

<Level>1</Level>

<Task>63</Task>

<Opcode>0</Opcode>

<Keywords>0x8000400000000002</Keywords>

<TimeCreated SystemTime="2016-01-04T21:03:56.991237200Z" />

... Read more

More replies
Relevance 48.79%

Hi, i have just done a fresh install of win 7 and all was normal for 7 days with no errors in the event log but now on every start up i get the above error in the event log and don,t know how to trace it.After hours of googling i came upon a thread where you had helped someone else with the same problem.Thanks in advance for any help you can lend me.  Regards mark

Answer:Event ID 6008 The previous shutdown was unexpected

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy,  taking care to post the link of the snapshot in your next post.
   Go to Piriform's website, and download the free version on the left.  Click Download from Piriform.com (the FileHippo link requires an extra click). Or if you want to use a portable version of Speccy (which doesn't require installation), click the builds page link and download the portable version. You will now be asked where you want to save the file. The best place to put it is the Desktop, as it will be easy to find later.
    After the file finishes downloading, you are ready to run Speccy. If you downloaded the installer, simply double-click on it and follow the prompts until installation is complete. If you downloaded the portable version, you will need to unzip it before use. Right-click the ZIP file and click Extract all. Click Next. Open up the extracted folder and double-click on Speccy.
 
     Once inside Speccy, it will look similar to this (with your computer's specifications, of course):
     Now, at the top, click File > Publish Snapshot. You will see the following prompt:
 &#... Read more

2 more replies
Relevance 48.79%

Problem 1
I'm not sure if this is a hardware or software problem, but I have a newly built computer and experienced some strange shutdown problems. When I shut down the computer it hangs for a couple of seconds before shutting down. It sounds like the secondary HDD start up, shuts down, starts up and shuts down again before the computer shuts down itself. This always gives me a critical warning in event viewer saying that the PC wasn't shut down properly.

Sometimes it won't shut down at all, and I have to use the power button on the case. The LED code on the motherboard always shows "D4" when computer won't shut down, which means "PCI allocation error - out of resources". HDD also makes power down/up noises. This problem I have had all since I built the computer, but after I did a clean install of Windows with diskpart, it happened that the PC would randomly shut down or enter hibernation mode with LED code "D3", which means "some of the architectural protocols are not available".

However, if I turn off "fast startup" I experience none of these problems. It happens that the PC won't shut down, just much, much more rarely. When that happens LED code shows "D5" which means "no space for legacy option ROM initialization."
What I find strange is that these codes describe problems that doesn't seem to have anything in common, but the LED codes are only from D3 to D5, which are right after eac... Read more

More replies
Relevance 48.79%

System : Dimension 3000 Hello, i'm having a problem with my Mother's computer. It is shutting down (completely powering off) and will not come back on for several hours, sometimes days. When it does power back on, before booting into windows, i get an error message that reads: Alert! Previous shutdown due to thermal event. I do not know what the problem is, both the case fan and power supply fan work properly and i have removed all of the dust from inside the case, including from the cpu heatsink. The case is not missing any expansion slot covers either. When i check the logs in the bios nothing is showing up at all. The computer is out of warranty and i'm stuck on what to do? thanks.

Answer:Alert! Previous shutdown due to thermal event

jholty
Have you checked, that the front panel air intake is clean?
Open the case and check that both the processor and chipset heatsinks are still firmly attached to the motherboard.
Bev.

14 more replies
Relevance 48.79%

Hi

Please can you help me a friends computer keeps having the BSOD mentioned above i have attached the required log if you could help

Cheers
Andy

More replies
Relevance 48.79%

Server 2003 has a Shutdown Event Tracker that requires that you "best describe why you want to shutdown the computer". It is on by default, but can be turned off using Group Policy.

Wonderful!

Somewhere along the way, one (and only one) of my XP machines (SP2 + all updates) acquired that same "feature". The Group Policy trick mentioned above has no relevance in XP, so I can't stop this event tracker that way.

Among other things, it makes a remote shutdown impossible (unless I use an RPC terminal). Besides, it's a pain to have to type in a reason (usually "Windows F%#*ed up again") when all I want to do is to shutdown or reboot.

If it runs as a service, I can't find it in either "Services and Applications" or in "Sysinternals Process Explorer"

And another thing!!! I can't find the logged events in the Event Viewer for Application, Security, or System.

If I could find it, I'd drive a stake through its heart. How do I kill the beast?

To prove that I've taken my meds today, here's a screen dump:

Askme nicely and I might explain how I got a screen dump of an XP computer part way into shutdown.

Thanks in advance.
 

Answer:Shutdown Event Tracking (XP, Not Server 2003)

Heres a couple of articles:

http://support.microsoft.com/kb/555541/en-us
http://www.tweakxp.com/article37489.aspx
http://searchwinit.techtarget.com/tip/0,289483,sid1_gci943320,00.html?Offer=w2k2
 

3 more replies
Relevance 48.79%

Getting shutdowns approx. every other day. Every time gets BlueScreen event.
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

I am attaching the .exe zip file obtained by the DM log collector. Thanks much for your help

Got another unexpected shutdown with the event: bluescreen. Any help would be greatly appreciated.

Answer:Computer shutdown with problem event BlueScreen

Quote:
fffff880`02b62978 fffff880`047a9a9aUnable to load image \??\C:\Program Files\Common Files\Bitdefender\Bitdefender Firewall\bdfwfpf.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for bdfwfpf.sys
*** ERROR: Module load completed but symbols could not be loaded for bdfwfpf.sys
bdfwfpf+0xca9a


Uninstall BitDefender. At least as a test. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Report us for any further BSOD.

6 more replies
Relevance 48.79%

==> NOTE <==

I placed this thread under the "bsod-crashes-debugging" forum because I wasn't sure where it belonged. If the moderator is able to move it to a more appropriate forum, please do so. If it is moved to a different forum, please inform me via email. Thanks in advance for any assistance with this issue.

-----------------

BACKGROUND:

Prior to upgrading to Windows 10, my system was running Windows 7 Home Premium SP1. When running my previous OS (WIN 7) I rarely had errors listed in Event Viewer. Now after upgrading to Windows 10, I get errors/warnings I never used to get under Windows 7.

The error I would like help with today is of the "Critical" level in Event Viewer.

PROBLEM:

After doing a normal shutdown, and then booting my system, I check Event Viewer and always find the following critical error:

"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."

---------------------- START: Event Viewer XML error text ---------------------

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>3</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0&... Read more

Answer:Critical error Event ID 41 after every shutdown and bootup.

RESOLVED:

Since placing this thread, I was addressing other errors I found in the event logs. One of those had to do with "Metadata staging failed".

Researching about this error let me to the URL:

http://www.eightforums.com/bsod-cras...-failed-3.html

where poster Saammy gave the following possible solution:

I have the solution for the problem.
Searches on regedit for the following entry: DeviceMetadataServiceURL
There you change the URL in the following: http://dmd.metaservices.microsoft.com/dms/metadata.svc
after you have closed the editor is saved the change.
Now the problem is solved and it will also re-loaded device information.

As instructed, I used regedit and searched for "DeviceMetadataServiceURL", and it's value was set to:

http://go.microsoft.com/fwlink/?Link...69&clcid=0x409

I changed the value to "http://dmd.metaservices.microsoft.com/dms/metadata.svc" and then rebooted.

The end result was that this did indeed fix the "Metadata staging failed" errors, and interestingly enough the Event ID 41 is no longer showing up in the event logs after shutdown/reboot. I did 5 shutdown/reboot sequences... 1 per hour, and neither problem has occurred since making the above change.

5 more replies
Relevance 48.79%

BACKGROUND:

I'm troubleshooting a critical error message I receive in the event log. It's the same as has been previously reported here. Prior to upgrading to Windows 10, my system was running Windows 7 Pro SP1. When running my previous OS (WIN 7) I rarely had errors listed in Event Viewer. Now after upgrading to Windows 10, I get errors/warnings I never used to get under Windows 7. I have performed a clean install of Win 10 and still am receiving error messages.

The error I would like help with today is of the "Critical" level in Event Viewer.

PROBLEM:

After doing a normal shutdown, and then booting my system, I check Event Viewer and always find the following critical error:

"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."

---------------------- START: Event Viewer XML error text ---------------------
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />

<EventID>41</EventID>

<Version>3</Version>

<Level>1</Level>

<Task>63</Task>

<Opcode>0</Opcode>

<Keywords>0x8000400000000002</Keywords>

<TimeCreated SystemTime="2016-01-04T21:03:56.991237200Z" />

... Read more

More replies
Relevance 48.79%

I am running Windows 2000 workstation and need to get an audit report generated that documents when the computer shuts down. It will tell me when it is started (Event Viewer: Security) but not when it shuts down. Windows XP Professional will report both.

Q: How do I get W2K to record and report when it shuts down? Is it a registry setting? A local policy setting?

TIA.

--Bruce

Answer:W2K WS Event Viewer Shutdown audit question

Maybe this will help:

http://www.sans.org/resources/auto_a...#Audit%20Setup

3 more replies
Relevance 48.79%

OK so for the last week or so my pc has been cshutting off at random times and then on reboot indicating that there had been a thermal event. The fan on the CPU is working and the computer often shutdown immediately following start up (before there would be any chance for it to get too hot) I have run Advanced Systemcare free SInc I got it along with AVG Free. When I started noticing problems I also downloaded Ad-Aware and MalWareBytes. All systems run clean, but performance still sucks. Today I get the Thermal event Shutdown message again and when I look at thr event log it shows that my memeory was reduced on Oct 14th. I decide to try to go back to a restore point, and coincedientally the last restore point is Oct 14th. I run system restore, and the restore application comes back and tells me that it can't restore the computer to that day.

There is too much coincidence to make me think that nothing is happening, but I'm not PC savvy enough to figure out on my own. PLease help. Hi Jack this logs below
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 6:18:42 AM, on 11/6/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS�... Read more

Answer:Thermal Event Shutdown? HiJack this Logs

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything. We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here. To help Bleeping Computer better assist you please perform the following steps:*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/426567 <<< CLICK THIS LINK If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.*************************************************** If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lo... Read more

2 more replies
Relevance 48.79%

Hi Sorry for my english, I prefer German! My Notebook shut down automaticly after a while. The Notebook is running 7x24, but with low usage of the CPU and RAM. It does some jobs, like recording values from a connected sensor. After different running times, the Notebook shuts down. When I turn it on, it asks for Save or Normal Startup. I've read a lot in the Internet but I still got the problem. So these things I've tried: - System Scan with the Lenovo Tool. => No Errors, but BIOS didn't work.- Updated all the recommended things from that Tool- All updates from Windows Update- Manual Bios Update from 1.00 to 1.62- Set the Windows Power Settings from the notebook to High In the event results of W7 I can find under System for example: - Warnung Kernel-Processor-Power ID 37: Die Geschwindigkeit des Prozessors 3 in der Gruppe 0 wird durch die Systemfirmware begrenzt. Seit dem Bericht befindet sich der Prozessor seit 86400 Sekunden in diesem Status mit verringerter Leistung. - Kritisch Kernel Power ID 41: BugCheckCode 0, everthing is with 0 - Fehler Event Log ID 6008: Das System wurde unerwartet heruntergefahren - And many kind of Fehler Kernel-General ID 6. Some Ideas? Thank you


























Eventlog.zip ?781 KB

More replies
Relevance 48.79%

==> NOTE <==

I placed this thread under the "bsod-crashes-debugging" forum because I wasn't sure where it belonged. If the moderator is able to move it to a more appropriate forum, please do so. If it is moved to a different forum, please inform me via email. Thanks in advance for any assistance with this issue.

-----------------

BACKGROUND:

Prior to upgrading to Windows 10, my system was running Windows 7 Home Premium SP1. When running my previous OS (WIN 7) I rarely had errors listed in Event Viewer. Now after upgrading to Windows 10, I get errors/warnings I never used to get under Windows 7.

The error I would like help with today is of the "Critical" level in Event Viewer.

PROBLEM:

After doing a normal shutdown, and then booting my system, I check Event Viewer and always find the following critical error:

"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."

---------------------- START: Event Viewer XML error text ---------------------

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>3</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0&... Read more

Answer:Critical error Event ID 41 after every shutdown and bootup.

RESOLVED:

Since placing this thread, I was addressing other errors I found in the event logs. One of those had to do with "Metadata staging failed".

Researching about this error let me to the URL:

http://www.eightforums.com/bsod-cras...-failed-3.html

where poster Saammy gave the following possible solution:

I have the solution for the problem.
Searches on regedit for the following entry: DeviceMetadataServiceURL
There you change the URL in the following: http://dmd.metaservices.microsoft.com/dms/metadata.svc
after you have closed the editor is saved the change.
Now the problem is solved and it will also re-loaded device information.

As instructed, I used regedit and searched for "DeviceMetadataServiceURL", and it's value was set to:

http://go.microsoft.com/fwlink/?Link...69&clcid=0x409

I changed the value to "http://dmd.metaservices.microsoft.com/dms/metadata.svc" and then rebooted.

The end result was that this did indeed fix the "Metadata staging failed" errors, and interestingly enough the Event ID 41 is no longer showing up in the event logs after shutdown/reboot. I did 5 shutdown/reboot sequences... 1 per hour, and neither problem has occurred since making the above change.

3 more replies
Relevance 48.79%

So I've been in the process of putting together a HTPC. It's a little Habey 800B case with a ASRock E350-M1 motherboard running W7 64 bit. I havent had any issues with it while installing Windows or any of the misc programs (Office, MSE, XBMC, etc). But I recently turned it on in the morning and was going to let it run all day so that I could remote to it from work and work on it when I had a few free minutes. But when I got to work and finally got some time, it showed as being offline??? I figured that it had gone to sleep. So the next day I connected a monitor/keyboard/mouse to it, booted it and it showed that Windows had shut down unexpectedly. I selected the "Load Windows normally" option and then set the power options to "never" sleep. I attempted the same thing the next day, and again it was off when I tried to connect to it???

It took me a few days to get back to looking at it. After booting and messing around with it for a bit it seemed a bit sluggish and froze once, requiring a manual reboot. I checked the Event Logs and took as many screen shots as I could. I posted the screen shots below hoping that someone can give me some info from the Event log info.

Someone here at work suggested I search for the .dmp files to see if they would give any further info. Thanks in advance for any assistance.





This is the full text from the above User Profile Service error.


Also the last couple of times I manually rebooted, I got t... Read more

Answer:Event viewer info after a HTPC shutdown

Looks like a disk error to me. You had an error in your event log regarding a disk error, and you had a few boots that were disk related, too.
 

7 more replies
Relevance 48.79%

Hello all,
The problem is I had an old Nvidia gforce 5200 agp graphic card and upgraded it to a ATI 9600 xt agp graphic card and probably after a week after the installation when I shutdown my pc I get an end now message .Net Broadcast Event Viewer 1.0.5 end now. The ATI card requires the microsoft framework to run which I already have since I use Visual Studio .Net 2003 with framework v1.1. I decided to download the free 2005 visual basic and C# express with framework 2.0 which I heard is allright to run side by side with famework 1.1 and now after the first week of the new downloads I have two end now message .Net Broadcast Event Viewer upound shutting down. These pop up messages are getting really annoying, and I have googled to try to find a fix but have found nothing beside trying the microsoft UPh clean which did not work. Any help would be much appreciated. Thanks in advance.

Answer:end now message .Net Broadcast Event Viewer on shutdown

anyone?

1 more replies
Relevance 48.79%

My computer continuously shutdowns every hour or so without any warning. When the computer loads back up a message pops up telling me that I have had an unexpected shutdown. If I click on more information it shows me what the error was (I have the error message copied if you wish to see it) but it makes no sense to me.

I have looked around for a solution but my error message is different to everyone elses.

If anyone could help me with this problem it would be much appreciated, thank you in advance.

Specs:

OS: Windows 7 Ultimate 64-bit
Processor: Intel Core 2 Duo
RAM: 2GB
Graphics card: ATI Radeon X1600 Series
Previous OS: Windows XP Media Center Edition

Lee.

Answer:Unexpected Shutdown - Problem Event Name: BlueScreen

@ttran

Sorry, I will do that now.

Thank you

@Marvel Varghese

I am certain it's not the beta, I bought Windows 7 Ultimate.

9 more replies
Relevance 47.97%

I have had three of these shutdowns randomly occur over the last 2 days. I have no warning on when they will occur.

The computer is only 5 weeks old, so i wouldn't except an overheat issue personally. I can think of no new software i have installed since this has started. So far, it has always happened while playing a game (Diablo 3) but that is likely just coincidental, as that is what i do most on this computer

Any ideas on what to do/check?

Any more info you need that what i provided?

MSI GT70 0ND computer
GTX 675MX vid
16GB DDR3
i7 3630QM
THANKS!!

Answer:Kernel Power Event 41 Task 63 - Random shutdown

Event ID 41 errors are primarily caused by:
- shutting down the system by holding the power button down
- overheating
- power supply issues

Install temp monitoring software (I suggest HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools )
Open up the case and point a house fan into it (on high) - see if the lessens the frequency of the Event ID 41 events
If neither of these help, then see about getting an 80+ rated PSU from a store that you can return it (if it's not needed).

Just in case, here's my usual canned speeches:

For starters:





At work we start all repairs with a set of diagnostics. Often they find problems that weren't even expected. It's a waste of time to try to fix software on a system that has hardware problems.
Please try these free diagnostics for starters: Initial Hardware Diagnostics
Also, please ensure that you have ALL available Windows Updates (it may take several trips to get them all).



Please provide this information so we can provide a complete analysis (even though you're not reporting BSOD's): https://www.eightforums.com/bsod-cra...tructions.html

Good luck!

18 more replies
Relevance 47.97%

Hi, everyone! I recently upgraded from Vista to 7 Home Premium 64-bit on a month-old machine. The computer has been running 7 for several weeks, and this error just showed up within the last couple of days.

When I go to shutdown or restart, I get a screen that says Waiting for background processes to close. The screen is only up for maybe a second, with no list of what process needs to close. Then Windows shuts down normally.

I went through msconfig and determined that the RAID event monitor is the program causing the hangup. What does this mean? Has anyone else encountered problems with this? Is there any way to fix it other than just disabling the program in msconfig?

Any help would be greatly appreciated! I am very noobish and really don't know what to do here.

Answer:RAID event monitor causing problems at shutdown

Fill in your hardware specs with HWInfo32 and update your drivers with the guide in my sig. You need that app if you have RAIDED hard drives.

2 more replies
Relevance 47.97%

Hello, my dell precision t3500 started showing symptoms of bad Heatsink since december 2015.  It has been restarting several times and showing "Previous shutdown due to thermal event.".  In the first few weeks it used to shutdown like twice a week. Currently i get a lot of shutdowns. I can't use my computer for 3 hours, it shuts down at least once every single hour. 
What i've done so far....(My solutions)
I rubbed off the heat sink compound between the processor and heatsink and applied new heatsink compound. This didn't help.  The computer was still shutting down due to thermal events.
I read on a forum where someone was having a shutdown problem just like me and a dell expert advised him to upgrade to the latest bios. I was running the latest bios at the instant when my computer started shutting down due to cpu excessive temperature. I tried downgrading the bios from A17 to A14, now the computer would stay for 3-5 hours without shutting down. Downgrading didn't help either.  I know that the old bios had a greater temperature threshold and that's the reason for the computer staying longer before detecting a excessive cpu temperature than in the A17 bios version. Ok, so processor upgrade/downgrade didn't help either.
i wen't out to a computer store and bought a new Heatsink for my dell precision t3500, i removed the old HeatSink and replaced it with the new one. The computer booted just fine, stayed up for 3 hour... Read more

Answer:Dell Precision T3500 Shutdown due to thermal event

What's the actual full error when the thermal event occurs?  Usually there are multiple temp sensors on a machine - does error say which one is causing thermal event?
I'd see what all temps actually are and monitor them.  What does HWMonitor or HWiNFO (Sensors window) say temps are when system is idle and under load? 
What CPU are you using?  Thermal shutdown threshold within a CPU is often around 100C, which usually is pretty hard to hit for a desktop (as opposed to a laptop). 
What heatsink compound are you using?  Is it making good contact but thinly applied?  You can check this by removing the heatsink - compound should be pressed out and thin enough to "see through it' evenly across surface.  A thick application has poor thermal properties because thermal compounds are much poorer conductors of heat (~8 W/mK) than copper (~400 W/mK) or aluminum (~200 W/mK).
I'd also check for dust/blockage on case air intakes and fans (including the PSU fan) - this can cause poor heat removal from the case and resulting heat buildup.

3 more replies
Relevance 47.97%

I just rebuilt with a new motherboard, new Intel 6600K, and new RAM. It's assembled on a table top rather than in the case. All other parts are from an earlier build but believed to be in good shape.

I went to sleep about 14 hours ago with my PC still running. I was doing a backup job that would take a few hours, so I just slept.

6 hours later I woke up and notice that the CPU fan is not spinning. Panic. I didn't know if the motherboard had failed, the fan had failed, or even if the PC was running. Nothing displayed on the monitor.

I shut down and rebooted successfully, getting the "Windows did not shut down properly error".

Looking at logs, I see that the backup job completed at 1236 pm and that the Windows shut down at 1237, one minute later. Coincidence? Maybe.

Windows Reliability History gives no info beyond mentioning the unexpected shutdown.

Event Viewer may have more info, but I'm not familiar enough with it to find anything useful.

Do you have any specific help on Event Viewer?

Also interested in any ideas you may have on the cause.

The local power company says there were no failures today in my area.

The PC appears to be working OK for the last 8 hours since I restarted.

The backup job did in fact complete successfully. All files were copied as expected.

I re-ran the backup job to see if the PC would shut down when it finished a second time. It did not.

The new hardware has less than 100 hours of time on it and I need ... Read more

Answer:Event Viewer help? Need to diagnose unexpected shutdown on new build

I would run a memtest with the new RAM.
RAM - Test with Memtest86+

1 more replies
Relevance 47.97%

Now, this is a thread I am starting just in case anyone else has run into this issue but, it looks like I have found the solution: https://www.tenforums.com/bsod-cras...-event-id-41-after-every-shutdown-bootup.html

Ok, I have had this Windows 10 install from September 2015 until now and I am not going to redo it from scratch. The error 41 would only occur when I was using Hybrid shutdown mode but never without it. Also, it was a highly random issue, sometimes, it would occur and sometimes, it would not occur for the longest time.

I have gone from a Gigabyte Z170 and i7 6700k to an FX 8300 with Asus 970 Pro Aura on this build. I now have 2 x 1TB SSD but, I was also using a 180GB Intel SSD and a Adata 480GB SSD at one point, I just cloned the Windows 10 install over each time. I tried different sata cables, different sata drivers, tried using minimal hardware and even a different keyboard.

I am now on a 2 x Sapphire Fury setup, was on a EVGA 980 Ti, used a R9 380 and even had a R9 290x before the 980 Ti. I did the proper driver cleaning without issue and tried different video drivers as well. Recently, the problem appeared to more often and a lot less random.

After applying that solution above, it appears to have been resolved. However, I will keep this thread updated just in case.

Note: To those who want to just bash windows, DON'T! THis is meant to help people who may be running into this problem like I was for the longest time. It was only in the install of Window... Read more

More replies
Relevance 47.97%

Hi,
 
My desktop had been failing to wake from sleep (needing a restart everytime) since I installed the Windows 10 Anniversary update. Last night, I updated the chipset, intel graphics, and nvidia graphics drivers to their latest versions. Since last night, I have had three unexplained shutdowns after putting my pc to sleep. In event viewer, I am getting the 6008 error. 
 
My specs are
 
http://speccy.piriform.com/results/PepJcmtf23xATPNdl6YHn3L
 
Thanks for your help, and let me know what other information I might need to provide. 
 
 
Ciaran

More replies
Relevance 47.97%

Hi,

my son has a Toshiba Satellite P750-R10 and problems with spontaneous shutdowns.
Looking at the system log there is a "Kernel Power Event 41" for every occurrence.

It has happened several times today so now it is a major issue but it has occurred for the last 6 month (21 entries in total) but spread out over time.

Any ideas on what is wrong or how to troubleshoot this?

This is the details from the log:

+ System
- Provider
[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

EventID 41
Version 2
Level 1
Task 63
Opcode 0
Keywords 0x8000000000000002

- TimeCreated
[ SystemTime] 2013-01-01T14:18:59.960009600Z
EventRecordID 114234
Correlation
- Execution
[ ProcessID] 4
[ ThreadID] 8
Channel System
Computer Allansdator
- Security
[ UserID] S-1-5-18

+ EventData
BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 0

/BR Peter

Answer:Satellite P750-R10 - Immediate shutdown - Kernel Power Event 41

Hi

I don?t have experience with this but plase check Microsoft document http://support.microsoft.com/kb/2028504

My personal opinion is that you should back-up all important data and reinstall OS. It is definitely most radical method but also most effective to fix such problems. after doing this you will have clean preinstalled OS and everything will be OK again.

1 more replies
Relevance 47.97%

I have just upgraded my PC as follows: New clean HDD & installed Windows 7 Home Premium 64bit (was Vista)
Memory increased from 4 to 16Gb.
Initially, all seemed well. (A couple of days) After many Windows updates, I had the start of many unexplained shutdowns & re-starts. On a few occasions, Windows Explorer has quit & restarted, but the PC has stayed on. Most times the PC was being used lightly or idle.
I have run memtest, disk checks etc, but no problems identified. Kernel power event 41 is noted in log.
Any help would be much appreciated!

Answer:BSOD & Unplanned shutdown. (Kernel power event 41)

Hi, I would really appreciate a reply to my previous post if anyone has any advice to offer. I have still not solved the problem & don't know what else to try, having contacted most suppliers of the components in my PC! Can anyone advise how to test the power supply?
I have re-fitted the original HDD with Vista 32bit installed, but retaining the new 16Gb memory, and have had no problems in 3 days.
Thanks for any advice

1 more replies
Relevance 47.97%

Anybody out there can tell me what this is supposed to mean ?

Noticed that after Windows is fully running, the monitor switches off and after a few seconds on again.

Below entry is about 25 minutes after booting the pc and Windows running idle.

=
Logged: 12-11-2015 13:00:30
The process Explorer.EXE has initiated the shutdown of computer DESKTOP-ZZZZZZZ on behalf of user DESKTOP-ZZZZZZZ\username for the following reason: Other (Planned)
Reason Code: 0x80000000
Shut-down Type: shutdown
Source: User32
Event ID: 1074
Level: Information

followed by 4 entries
Logged: 12-11-2015 13:00:31
The Sync Host_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
Source: Service Control Manager
Event ID: 7031
Level: Error

==

Thanks
=

More replies
Relevance 47.97%

I'm getting a trio of critical error messages in event viewer after each shutdown:

- "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."

- "Windows failed fast startup with error status 0xC00000D4."

- "The previous system shutdown was unexpected."

The PC starts up fine and seems to shut down very fast - within 10-12 seconds, and there seems to be no issues with startup or shutdown. But when I stumbled onto these critical messages in event viewer I got concerned. What could be triggering this? How do I troubleshoot this? They are logged in event viewer after each shutdown/reboot.

Answer:Critical error messages in event viewer after each shutdown

Try turning Fast Start Up off in the Power Options Menu. Finding the option is a bit obscure. There are some known issues with this. It is on by default in Windows 10 and will trigger shut down errors.

3 more replies
Relevance 47.56%

Hey folks!

I've had this issue since building a new x99 system. I did a fresh install of Windows 10 and after every single shut down I've received the following Critical error:

Kernel-Power Event ID 41 Task Category (63)
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

Code:
-
System


-
Provider

[ Name]
Microsoft-Windows-Kernel-Power

[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}



EventID
41



Version
4



Level
1



Task
63



Opcode
0



Keywords
0x8000400000000002


-
TimeCreated

[ SystemTime]
2016-09-02T15:55:45.533812900Z



EventRecordID
2994



Correlation


-
Execution

[ ProcessID]
4

[ ThreadID]
8



Channel
System



Computer
DannysX99


-
Security

[ UserID]
S-1-5-18

-
EventData


BugcheckCode
0


BugcheckParameter1
0x0


BugcheckParameter2
0x0


BugcheckParameter3
0x0


BugcheckParameter4
0x0


SleepInProgress
6


PowerButtonTimestamp
0


BootAppStatus
3221225684


Checkpoint
0


ConnectedStandbyInProgress
false


SystemSleepTransitionsToOn
1


CsEntryScenarioInstanceId
0



Things I've tried:

Changed power profile to no sleep, no hard disk sleep etc... Everything on. All drivers up to date. I even made some registry edits found in this post on tenforums.

Let me be clear: I've had no actual loss of power or unexpected reboots.... Read more

More replies
Relevance 47.56%

So, I'm having a really weird issue.

I have a pc with a win10 Pro.
It was upgraded from Windows 8. Still in windows 8 the shutdown and the restart took like 10 minutes each time.
Upgraded to 10 expecting this not to happen.. It still does..

After alot of search, I started disabling Windows services a few blocks at a time, and after that 1 at a time.

My conclusion is that when the event viewer service is online, the computer takes forever to shutdown or reboot..
If I disable the service, the computers shutdown and restart are done in a matter of seconds..
I've tested this.

Sooo.. I'm lost here.. Tried sfc /scannow to see if that would fix something, but nothing was detected..

Answer:Event Viewer Service causing Shutdown/Restart slowdown.

You can force it to shutdown. 1000 = 1 second.

Code:
reg add "HKCU\Control Panel\Desktop" /v "AutoEndTasks" /t REG_SZ /d "1" /f
reg add "HKCU\Control Panel\Desktop" /v "HungAppTimeout" /t REG_SZ /d "5000" /f
reg add "HKCU\Control Panel\Desktop" /v "WaitToKillAppTimeout" /t REG_SZ /d "5000" /f
reg add "HKLM\System\CurrentControlSet\Control" /v "WaitToKillServiceTimeout" /t REG_SZ /d "5000" /f

1 more replies
Relevance 47.56%

I have been having an issue with my system just simply shutting down without any warning almost as if a power outage occurred. No blue screen no notifications nothing. It has happened 4 times now while playing a game in particular. When the power goes out I cant turn the computer back on for about 2 minutes or so. I initially thought it was a cpu heating issue since i had a stock cooler, I changed it for an evo 212, but the same issue applies. Could it possibly be the PSU, even though it powers the computer 99% of the time and fan seems to be working fine? I went back into the windows event viewer and I have a link of the past week of errors that have been occuring, I just dont know what they mean. any help?https://onedrive.live.com/redir?resid=42B9E1D1DBB4DB7C%...
specs are as follows: amd 8350 4.0ghz, gigabyte 990fx mobo, gtx 760 nvidia gpu, 650W PSU silverstone ac input 115-240Vac 60-50Hz, 8 gb ddr 3 ram.
temperatures doesnt reach more than 58 degrees under full load usually around 50 range.

this is the most recent incident.

Log Name: System
Source: Microsoft-Windows-Kernel-Power
Date: 8/28/2014 1:52:31 PM
Event ID: 41
Task Category: (63)
Level: Critical
Keywords: (2)
User: SYSTEM
Computer: NickKanarev-PC
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events... Read more

Answer:critical administrative event 41 random shutdown while gaming No BSOD

Please don't Double Post, People will still your old post within the BSOD Thread.

1 more replies
Relevance 47.56%

This has been happening periodically for several weeks It doesn't happen every day so I have been just restarting and continuing on. It seems to happen when the desktop is not even being used. (i.e. middle of the night). Power settings are to never sleep. I've been running core temp because somewhere I saw that it might be related to a thermal event, but that doesn't seem to be the case here. I am not seeing much in the event log other than the event 6008, unexpected shutdown (with no other details). I am not getting bSOD minidumps either in the c:\windows\minidumps folder even though I do have this setup in system security. I've attached the dump files so hope that one of you can help me take a look to see if you can help me to figure it out. The last 6008 was earlier today around 2 AM PDT. Right now I am running chkdsk to see if that turns up anything. Any help appreciated. Thanks.

Edit: see updated dump file in post #3

Answer:Event 6008 unexpected shutdown Win7 Ultimate 64bit

There are numerous files missing from your upload, please run the tool again and wait for the files to be gathered then upload

3 more replies
Relevance 47.56%

Hi I bought my laptop about 3 months ago
i got BSOD relating event 41 task 63 kernel power many times and got twice BSOD today
it really made me frustrated
please help

Answer:BSOD Event 41 Task 63 Kernel-Power Random shutdown

This is a detail about my laptop's random start today

System


-
Provider

[ Name]
Microsoft-Windows-Kernel-Power

[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}





EventID
41





Version
3





Level
1





Task
63





Opcode
0





Keywords
0x8000000000000002




-
TimeCreated

[ SystemTime]
2014-10-02T06:50:05.007895800Z





EventRecordID
14317





Correlation




-
Execution

[ ProcessID]
4

[ ThreadID]
8





Channel
System





Computer
Francis_Xiao-PC




-
Security

[ UserID]
S-1-5-18

-
EventData


BugcheckCode
209


BugcheckParameter1
0x40000000410


BugcheckParameter2
0x2


BugcheckParameter3
0x0


BugcheckParameter4
0xfffff88006170aa9


SleepInProgress
4


PowerButtonTimestamp
0


BootAppStatus
0

4 more replies
Relevance 47.56%

Hey folks!

I've had this issue since building a new x99 system. I did a fresh install of Windows 10 and after every single shut down I've received the following Critical error:

Kernel-Power Event ID 41 Task Category (63)
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

Code:
-
System


-
Provider

[ Name]
Microsoft-Windows-Kernel-Power

[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}



EventID
41



Version
4



Level
1



Task
63



Opcode
0



Keywords
0x8000400000000002


-
TimeCreated

[ SystemTime]
2016-09-02T15:55:45.533812900Z



EventRecordID
2994



Correlation


-
Execution

[ ProcessID]
4

[ ThreadID]
8



Channel
System



Computer
DannysX99


-
Security

[ UserID]
S-1-5-18

-
EventData


BugcheckCode
0


BugcheckParameter1
0x0


BugcheckParameter2
0x0


BugcheckParameter3
0x0


BugcheckParameter4
0x0


SleepInProgress
6


PowerButtonTimestamp
0


BootAppStatus
3221225684


Checkpoint
0


ConnectedStandbyInProgress
false


SystemSleepTransitionsToOn
1


CsEntryScenarioInstanceId
0



Things I've tried:

Changed power profile to no sleep, no hard disk sleep etc... Everything on. All drivers up to date. I even made some registry edits found in this post on tenforums.

Let me be clear: I've had no actual loss of power or unexpected reboots.... Read more

Answer:Kernel-Power Event 41 Task 63 during Every Shutdown! Fresh Install W10

Also getting these random crashes as well. Seem to be a daily occurrence.

4 more replies
Relevance 47.15%

I have vista 32bit and event viewer is showing the problems as follows:
1.The following boot-start or system-start driver(s) failed to load:
ATITool
sfdrv01
sfhlp02
sfsync02
sfvfs02

2. The Internet Connection Sharing (ICS) service depends on the Base Filtering Engine service which failed to start because of the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

3. The IPsec Policy Agent service depends on the Base Filtering Engine service which failed to start because of the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

4. The LogMeIn Kernel Information Provider service failed to start due to the following error:
The system cannot find the path specified.

5. The IKE and AuthIP IPsec Keying Modules service depends on the Base Filtering Engine service which failed to start because of the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

6. Terminal Service start failed. The relevant status code was The configuration data for this product is corrupt. Contact your support personnel.

7. Unable to initialize the security package Kerberos for server side authentication. The data field contains the error number.

8. The server service was unable to recreate the share york because the directory C... Read more

More replies
Relevance 47.15%

i have noticed that my computer has been taking longer to start up and shut down lately. i have used all my resources to see and control what i am running on startup, from msconfig to spybot's startup manager, there's not a lot running there so i went to check the event viewer and it's full of errors, critical events and warnings.

I tried using MS's websites for help but they are a nightmare to use, posted this same entry in their forums but no answer yet. I'll appreciate if you can help me understand what's going on with my computer. Thanks in advance

the last critical event reads as follows (the OS is in spanish so i'll translate to what i think it should be):

Windows has started up:

Boot duration : 135986ms
IsDegradation : true
Incident Time (UTC) : 27/04/2008 05:35:27 p.m.

Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
Source: Diagnostics-Performance
Date: 27/04/2008 12:38:01 p.m.
Event ID: 100
Task Category: Boot Performance Monitoring
Level: Critical
Keywords: Event Log
User: LOCAL SERVICE
Computer: (name deleted by me)


EventData

BootTsVersion 2
BootStartTime 2008-04-27T17:35:27.656Z
BootEndTime 2008-04-27T17:37:54.087Z
SystemBootInstance 512
UserBootInstance 493
BootTime 135986
MainPathBootTime 53423
BootKernelInitTime 15
BootDriverInitTime 3316
BootDevicesInitTime 5470
BootPrefetchInitTime 90685
BootPrefetchBytes 446992384
BootAutoChkTime 0
BootSm... Read more

Answer:Event viewer reports errors and critical events on boot and shutdown

the system specs in case t hey are useful at all:

DELL vostro 400
Intel core 2 Duo E6750 @ 2.66 ghz
2GB RAM

i tried to edit the previous post and there was a time limit, sorry for bumping this

1 more replies