Computer Support Forum

x64-based processor, but x86-based PC; can I upgrade to x64 bit?

Question: x64-based processor, but x86-based PC; can I upgrade to x64 bit?

Hi, I'm currently running a Windows 10 Pro PC with a 32-bit architecture. My processor allows for a x64 upgrade, but my system's information shows that my PC is x86 based. Can I still upgrade? I also have 6.00 gigabytes of ram, definitely enough for an upgrade.

Thanks in advance!

Relevance 100%
Preferred Solution: x64-based processor, but x86-based PC; can I upgrade to x64 bit?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: x64-based processor, but x86-based PC; can I upgrade to x64 bit?

No you cannot upgrade a 32-bit system to a 64-bit one. You can however, clean install a 64-bit system instead of the 32-bit one.

3 more replies
Relevance 100.86%

Hello,
I have a 32 bit windows 10 and x86 based pc but x64 based processor,originally it was a windows 10 64 bit and x64 based pc but my hard drive broke and got bad sector,it got fixed my a computer fixer but he installed 32 bit instead of 64 bit,i have a windows 10 x64 installtion media but when i run it it says it cannot run on my pc,i really wanna go back to 64 bit because only 2.60gb of my ram is usable out of 4gb

Answer:Wndows 10 x86,x86 based PC but x64 based processor,can it go x64

It could be because of some driver or other HW but if processor is 64bit (and it is), 64bit OS should run on it without problems.

0 more replies
Relevance 86.51%

Create Icon on desktop to open a websiteYa, I?ve done that for ever and it works great. But today I was on a chat with Norton support he was on my pc remotely trying to fix a LAN Proxy problem. He uninstalled several problem malware programs and installed some other programs including Google Chrome. After he was off the system I was checking around my HP Laptop and noticed the the Desktop Icons with Apps on the PC worked but all the web based icons did not work anymore. I did the procedure like I had many times before from a web site but the Icon just will not work at all. The error I get on all of them is when I click on the icon to open itIs Application Not Found.I?ve never seen this one before but I?ll keep trying to find the solution unless one of you gentlemen have a answer for me, I do plan on uninstalling Google Chrome and testing the icons again to see if that might have something to do with it?Thanks.Rod [email protected]

Answer:Desktop Icons web site based stopped working while PC based

What browser where you using before? internet explorer/firefox/etc?also is your browser still installed or did your tech uninstall it?Or perhaps the filelocation of your browser is no longer indexed.Simple solutions are often the best

4 more replies
Relevance 84.46%

Hello!

It says my processor is x64 bit based , but I'm running x32 bit Windows 10. It's a dual core,so if I'm running x32 only a core will work,or what?

Answer:x64 based processor

All it means is that your processor is capable of handling 64-bit. On a 32 bit install both cores will work fine. Obviously, by running 32 bit Windows you are missing out on some of the inherent efficiencies of a 64-bit set up. In short don't worry.

2 more replies
Relevance 84.46%

Hi,
when i go to computer info in windows 8 it is showing that i have 32-bit OS, x64-based Processor. i am slightly confused. does this mean i have a 32 bit OS installed but my computer is compatible with 64 bit? 

Any advice would be greatly appreciated

Answer:32-bit OS, x64-based Processor

Exactly.
Your OS installed is x86 (32-bit) and your CPU is x64 (64-bit) compatible.
You can run both x86 and x64 OS with your CPU.
Hopefully that answers your question. :)

11 more replies
Relevance 83.23%

1) My motherboard is am2/am2+ and some of the processors on the compatibility list are am3.. will they work?

2) Do new amd processors come with thermal paste?

3) how do you apply thermal paste? would you say it makes a difference how you apply it?
 

Answer:Few processor based questions

1. "AM3 can be used on AM2+ socket" .... more info http://www.tomshardware.com/forum/326365-28-chip-socket

So socket supports it but bios might not depending on the motherboard.

2. Every CPU I'v bought has come with thermal compound on the heat sink. Usually i buy arctic silver and apply that if I don't feel comfortable with the factory paste. You can always remove the factory paste and apply the third party paste if you notice temperature issues. You can use a program like core temp to monitor temps.

3. http://www.youtube.com/watch?v=9VSDkB-3st4
 

3 more replies
Relevance 82.41%

I know in Linux there is a basic frame based word processor called Kword; but am using Windows, and cannot use that. Is there a Windows counterpart for it? Or any plan to compile Kword for Windows environment?

More replies
Relevance 81.59%

Oh so i Run a Alienware m15x 6gig memory, Nividia 260m series GTX. So when i when to reinstall a new copy of windows 7 on, the Windows index says im running at 4.1 for processor speed when it should be almost 7.Any ideas?

Answer:Having i7 processor problems based off Windows index.....Needs help

Have you reinstalled the chipset drivers?

7 more replies
Relevance 80.77%

So I opened my system monitor just for the heck of it this morning and when I did so I noticed I had the cnql1213.dnl power-pc based THING running on my intel-based mac. I see it is something called a Vundogrb.My question is can I just delete this or is there more that I need to do to successfully rid myself of it. I used to use Windows, in fact I still do sometimes for my laptop, but most of the time I used my Mac and so long since I really worried about this stuff that I'm not sure exactly what to do with it?Can you tell me something about this creepy intruder and how I need to deal with it?Thanks.

Answer:A PC based spy on an Intel-based Mac 10.11.14 Tiger

Assistance from Apple support given here: http://www.bleepingcomputer.com/forums/ind...t&p=1462502Since Apple is supporting this machine. I am closing this topic, to avoid conflicting information and causing confusion.In the event you still need assistance and Apple still is unable to resolve your issue. Please start a new topic in the Am I Infected Forum: http://www.bleepingcomputer.com/forums/f/103/am-i-infected-what-do-i-do/

1 more replies
Relevance 80.77%

so..how do I identify the firepower a processor, for example, the I5-4210U Dual Core Processor? I'm looking to buy a new computer in the fall and I REALLY dont want to settle for processing power less than my current 2.40ghz intel I3 in my current system.

Answer:identifying processor firepower based off model number

Just write designation of "your processor" vs "another processor" in Google search, you'll get many hits with graphs and everything.

14 more replies
Relevance 80.77%

hi,
i have a question in my mind!
i download a graphic driver according to my motherboard or my processor

thank you

motherboard = zebronics h61
processor = pentium dual core G630

Answer:Graphic Driver download based on motherboard or processor

I would say motherboard, having briefly looked up the specifications, the motherboard one appears to be more powerful.

2 more replies
Relevance 79.54%

Can someone please help me get rid of these three viruses that I can't seem to get rid off?

I have tried all of the steps that you suggested before posting for help. I have downloaded Adaware, Spybot, Anti-virus program from my internet provider, MCAfee AVERT Stinger, Sygate Personal Firewall (although I am not sure what I should allow on the network or not... _) the Windows updates. And still no luck with the removal of these:

W32/Rootkit-Backdoor-based!Maximus

W32/Trojan.BWZC

W32/NewMalware-LSU-based!Maximus

Please help, they are driving me nuts. The performance of our PC is being affected. Thanks so much.

Answer:W32/rootkit-backdoor- Based!maximus ; W32/trojan.bwzc; W32/newmalware- Lsu-based!maximus Help!

Hi CharlotteD,I have moved your HJT log to the HijackThis Logs and Malware Removal forum, therefore you shouldn't make any changes to your system.Doing so, could change the results of the posted log, making it difficult to properly clean your system.At this point, the HJT Team should be the only members that you take advice from, until they have verified your log as clean.Your HJT Log is posted Here.I'm closing this topic until you are cleared by the HJT Team. If, after your log has been cleaned, you still need help, please PM a Moderator and we will re-open this topic.If you have any questions, don't hesitate to send me a PM.

1 more replies
Relevance 76.67%

As usual, when new, this laptop ran so well. I did add some necessary programs and have the usual slow down.
I have three questions,

Is it the processor that governs the over all speed? I had a 1.6GHz that was incredibly slow. The 2.6 was initially fast and made me happy.
Would it be cost effective to change out the processor? Can I change out the processor?
Is there a program that really will 'clean up' the *** that slows down a pc? I use Glary and/or Ccleaner. All they seem to do is eliminate my shortcuts and automatic signin locations. 

Thanks to all who strive to assist those of us who are frustrated.
May you be blessed in ways you have not yet imagined.  Pat

Answer:Slowed down - Inspiron 5559 Laptop, i5-6200U CPU @ 2.30GHZ 2.40GHz, 64-bit operating system, x64-based processor

1.  Not by itself, no.  In fact, if the system has a conventional hard drive, that's the slowest component in the system.  If the system is running abnormally warm, that too will slow things down markedly.
2.  No.  The CPU is soldered to the mainboard, so a CPU upgrade means you must replace the mainboard - which makes it cost-ineffective.
3.  Again, it depends on the reason for the slowdown.  You may want to start with a thorough run of the Dell diagnostics (F12 at powerup).

2 more replies
Relevance 75.85%

Hi I have a few questions about upgrading my machine to a media centre PC.

I purchased my PC awhile ago back in 2004 and I'm interested in upgrading my PC to a Media centre based PC,but I'm unsure if I should buy a new mobo that is PCI Express based along with a media centre compatible PCIe video card and TV tuner card?...is this upgrade worth it considering PCIe seems to be taking over?,I'd also have to upgrade my Ram to DDR 2 to support the new board, should I just stick with an AGP video card along with a PCI tv tuner card until I later upgrade my mobo,ram,video card?.The TV tuner card I've decided on is a PCI card,so it will work later on the newer PCIe based board, which also has PCI slots..but what about an AGP video card?,I highly doubt it cuz wheres the AGP slot on the new Intel PCIe based board?.
The reason I ask is because my current mobo is older, its an Intel D865GBFL with no PCI Express slots, just 6 PCI slots, and the video card I have now is an AGP type, my Ram is 512mb DDR...so I'm wondering if it is worth spending all the extra money on a new PCIe based board along with a PCIe video card and DDR 2 Ram,etc.. instead of just buying an AGP type of card that works on my current mobo..but then again for the future, newer boards don't support AGP, I noticed,so?(is it worth investing in AGP cards)
.

I wanted to purchase the ATI All in wonder 2006 Edition video card,which is media Centre compatible and AGP interfaced, which would wor... Read more

Answer:upgrade to a Media centre based PC

8 more replies
Relevance 75.85%

I've got one of those pre-made Gateway towers with XP on it and was wondering if the specs were decent enough to upgrade to Windows 7. Here they are:

- Intel Pentium D Processor 820 (2.8ghz, dual core)
- Intel Graphics Accelerator 850
- 250gb hdd
- 1 gig DDR2 RAM

The only thing that makes me question this is the RAM, as Win7 requires a minimum of 1gb RAM. Would the OS run smoothly? It's not going to be a workhorse of a computer or anything.

Thanks in advance.
 

Answer:Based on these specs, should I upgrade to Windows 7?

8 more replies
Relevance 75.03%

This is not good news, especially for those people who purchased recently a new machine with the Intel Cedar Point chipset. From Some Intel-Based Tablets Flunk Windows 8 Upgrade - Hardware -:

Numerous models of Windows 7 tablets and netbooks, some less than a year old, that should be upgradeable to Windows 8 won't be able to handle Microsoft's new operating system due to problems with the Intel chips that power them, according to computer manufacturers and frustrated users.
The problems affect systems that use the current version of Intel's Atom line, known as Cedar Trail. Intel is rolling out a new version of Atom, called Clover Trail, that is specifically designed for Windows 8 hardware, but that's too late for many users who previously bought systems on the belief they could upgrade later.

Affected products use the Intel Cedar Trail N2800 processor and the Intel Graphics Media Accelerator 3650. It also appears that Intel's previous version of Atom, Pine Trail, which also uses GMA 3150 for graphics is affected.
Affected products:ASUS Eee PC 1225CFujitsu Q552 tablet (released in July, 2012!)HP Mini 210 HDToshiba's WT200Lenovo IdeaPad S110

Answer:Some Intel-Based Tablets Cannot Upgrade to Windows 8!

Ouch. Not good. I am so glad I didn't pick up a tablet before Win8 was released (was looking at the Lenovo) to try it out.

1 more replies
Relevance 74.21%

Hello HP, I own an HP X2 10n-002nl which was delivered with 32-bit windows 8.1 and now upgraded to 10. I recently discoverd, to my disappointment, that it is imposssible to install 32-bit or 64-bit OS such as Linux without incurring into much trouble.(I've just tried but I **bleep***** up the process ending with a 501 bios error, then I have reinstalled a clean win10) It would be nice to have both 64 bit processor and hardware giving the user more flexibility in its OS choice. Anyway this tablet is so slow compared to Android tablet! A boost is much needed! Than you for your attention MV

More replies
Relevance 73.39%

I had Windows 10 build 10240 running on my older computer but the upgrade to build 10586 failed.

This is an older system - non-UEFI - with a MBR boot volume.

The boot volume has 4 partitions: Windows 10 Pro (NTFS), Data (NTFS), Linux (ext4) and Linux swap. There are none of the extra 'normal' special partitions like the small EFI and MSR one usually finds on more modern systems.

The system boots from grub to either windows or Linux.

This has worked on Windows 8 and the upgrade to Windows 10 build 10240.

But when I install the newest Windows build 10586, the new version of Windows 10 destroys the grub loader and I get an MBR load error.

The volumes seem to be OK, but the boot info gets trashed.

I've restored back to Windows 10240 and tried on a different hard disk and I got the same results.

I tried restoring the MBR and also tried using 'bootrec /fixmbr' but nothing seems to work.

I am restoring a third time back to Windows 10 build 10240 and I will try something else.

Perhap I should try to remove grub before the next upgrade attempt.

Has anyone else encountered this issue and have any ideas?

Answer:Upgrade to Win 10 v10586 from 10240 on GRUB-based system fails

See this Multiple OS Installation - and also this MultiOSBoot - Community Help Wiki

0 more replies
Relevance 73.39%

Hey guys please help me. I want to upgrade to Windows 10 but I am worried that my visual basic created program might get deleted and it is very important to me and it is not a commercial software but a private software created with Visual Basic I guess and I can't get it installed as the person who owns the software will be disturbed and also it contains some records.

During the installation as far as I remember cmd (as administrator) was also used so considering that I think it might stop working but if any one c help me in this problem it would be really great.

Answer:Will Visual Basic based program be deleted after Windows10 Upgrade?

vinnaykumar said:

Hey guys please help me. I want to upgrade to Windows 10 but I am worried that my visual basic created program might get deleted and it is very important to me and it is not a commercial software but a private software created with Visual Basic I guess and I can't get it installed as the person who owns the software will be disturbed and also it contains some records.

During the installation as far as I remember cmd (as administrator) was also used so considering that I think it might stop working but if any one c help me in this problem it would be really great.



Doing WIndows Upgrades normally do not cause loss of data or programs. Doing a Windows Clean Install will usually will wipe everything out first. It's possible for older programs that use VBA may have problems so be sure to make a copy of anything you don't want to lose, anything that you created or that exists nowhere else.

3 more replies
Relevance 73.39%

I had Windows 10 build 10240 running on my older computer but the upgrade to build 10586 failed.

This is an older system - non-UEFI - with a MBR boot volume.

The boot volume has 4 partitions: Windows 10 Pro (NTFS), Data (NTFS), Linux (ext4) and Linux swap. There are none of the extra 'normal' special partitions like the small EFI and MSR one usually finds on more modern systems.

The system boots from grub to either windows or Linux.

This has worked on Windows 8 and the upgrade to Windows 10 build 10240.

But when I install the newest Windows build 10586, the new version of Windows 10 destroys the grub loader and I get an MBR load error.

The volumes seem to be OK, but the boot info gets trashed.

I've restored back to Windows 10240 and tried on a different hard disk and I got the same results.

I tried restoring the MBR and also tried using 'bootrec /fixmbr' but nothing seems to work.

I am restoring a third time back to Windows 10 build 10240 and I will try something else.

Perhap I should try to remove grub before the next upgrade attempt.

Has anyone else encountered this issue and have any ideas?

Answer:Upgrade to Win 10 v10586 from 10240 on GRUB-based system fails

See this Multiple OS Installation - and also this MultiOSBoot - Community Help Wiki

14 more replies
Relevance 72.57%

I thought I was being clever, but I've hosed my system! I wanted to upgrade to a bigger disk. The old disk (I'll call it HD80) is an ancient 80Gb SATA I drive. The new one (HD500) is a 500MB SATA II drive. What I did was:

1. Create a partition on HD500, format it to NTFS, label it D:
2. System image backup to D:
3. Boot Puppy Linux Live USB stick
4. GParted - remove partitions on HD80, repartition, format to NTFS
5. Copy the Recovery Image folder from HD500 to HD80
6. Boot from Windows System Repair DVD
7. Try to restore the recover image to from HD80 to HD500

The recovery starts, but then fails quickly with an error "Unable to restore to backup media" error text might be slightly different from that, but I think the reason might be it's trying to recover to the drive where the recovery image is stored.

Is there any way out of this? Surely these recovery images should be portable?

Answer:Recovery image based disk upgrade - can't restore to backup medium

I am not quite sure what you were trying to accomplish. How did you "copy" the image in step5. Are you using Windows 7 imaging. When you repartitioned HD80 with GParted, did you remove the partition that contained the bootmgr (usually C or the system partition). That bootmgr is needed to get the recovery partition going.

6 more replies
Relevance 72.16%

I am a teacher, and have had my students do some assignments on Open Office using machines that run Edubunu. They have then uploaded their assignments and I want to be able to mark them at home but I have windows based Open Office. Will I be able to open their assignments?

Answer:Can I open documents created on Open Office on a linux based system using a windows based Open Office?

Yup!
PS
Your school must be so cool if it uses Edubuntu!

1 more replies
Relevance 68.06%

How can we get DSL modem's IP (Or other IP based devices like Wifi Router etc) if directly connected through Ethernet cable with a system.

If we dont have any idea of its current IP and it is already configured. I dont want to Reset the modem settings.
 

Answer:Get IP of a IP based device, IP of configured IP based device

7 more replies
Relevance 60.27%

I have Windows XP Service Pack 3 on my computer. How can I know it is x64 or x86 based?

Answer:XP - x64 or x86 based?

Press the Windows key and the Pause/Break key at the same time.
In the windows that opens, if it doesn't say x64 or 64 bit - then you've got the 32 bit version.

1 more replies
Relevance 60.27%

Ok, so I recieved my new ram today, Corsair 2GB DDR XMS3200C2PT TwinX (2x1GB) (CAS2) something or other, 2048mb worth. Now, I was under the impression that for the £170+ i spent ($300ish) that I would get super low latency ram, yet CPU-Z is telling me its Cas 3.0 despite the fact that it should be 2.0, can someone tell me what is going on?

http://img229.imageshack.us/img229/6006/wtf26kd.jpg
http://img207.imageshack.us/img207/3507/wtf18nj.jpg

My full spec:

AMD 64 3400 (socket 754)
128mb 6800 GT (AGP)
K8V T800 Pro mobo (socket 754)
2048mb PC3200 RAM

Answer:Help me! (Ram based)

It's running at what the ram is telling the PC to run it at.

If you want, you can try lowering the timings on the ram manually in your bios. Remeber to reset the CMOS if your computer does not boot after this.

9 more replies
Relevance 60.27%

Logfile of HijackThis v1.99.1
Scan saved at 4:02:33 PM, on 12/30/2007
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\Program Files\Analog Devices\SoundMAX\SMAgent.exe
C:\WINDOWS\system32\ZoneLabs\vsmon.exe
C:\WINDOWS\system32\winlogon.exe
C:\Program Files\Java\jre1.6.0_03\bin\jusched.exe
C:\Program Files\Analog Devices\SoundMAX\DrvLsnr.exe
C:\Program Files\Analog Devices\SoundMAX\DrvLsnr .exe
C:\Program Files\Java\jre1.6.0_03\bin\jusched .exe
C:\Program Files\Zone Labs\ZoneAlarm\zapro.exe
C:\Program Files\Windows Media Player\wmplayer.exe
C:\Program Files\MSN Messenger\msnmsgr.exe
C:\Program Files\Last.fm\LastFM.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\MSN Messenger\usnsvc.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\Ad-Watch2007.exe
C:\WINDOWS\System32\kuslmcuf.exe
C:\WINDOWS\explorer.exe
C:\WINDOWS\System32\rundll32.exe
C:\brians drive\hijackthis[1]\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://mysearch.myway.com/jsp/frontiersidebar.jsp?p=CI
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant = http://home.peoplepc.com/search
F3 - REG:win.ini: load=C... Read more

Answer:what should I do based on this log?

Apologies for the delay in responding.

The workload on this forum is intense, and sometimes it is not possible to respond to every inquiry.

Please download ComboFix.exe

Save it to the Desktop

Double-click combofix.exe to run the program
Follow the prompts.
(Don't click on the window while the program is running, it may cause your system to stall.)

When finished, a log, ComboFix.txt, is produced.

~~~~
Now, run HijackThis once again to obtain a new log.
However, since you re using an outdated version of HijackThis, please remove the version you have, and download the HijackThis Installer
Save to the Desktop.
Double-click on HJTInstall.exe to install the program.
A prompt appears showing that, by default, it installs to C:\Program Files\Trend Micro\HijackThis
Click: Install

At the main screen of the program, click on: Do a system scan and save a log file

~~~~
Please post the ComboFix.txt, and a the HijackThis log in your reply.

1 more replies
Relevance 60.27%

HelloI use 'outlook express' and I have very little experience with a web based email system.Are there any advantages with web based ? I realise that web based can be accessed from any where and that there is good storage.If I moved to Web Based which is the best? Every one has their own preference I expect.May be the subject is as long as a piece of string or maybe there is a very simple answer.I will enjoy the debate and it may be of use to others,I hope so.gel

Answer:Web Based or ISP based which is best

Why not try an ISP which also has web based access? I use Waitrose mail and find it excellent - mail is scanned for virus and spam, pop3 acess is great and on occasion I can check mail via web when away.

7 more replies
Relevance 60.27%
Question: Web-Based AIM?

I just thought of this the other day and was thinking that it must be out there somewhere. Does anyone know of a website through which you can log onto AIM and chat simply through IE, Firefox, etc.? This would be really cool for if your using someone elses computer who doesnt have AIM installed and you dont want to install it on their computer. Just a thought.
 

Answer:Web-Based AIM?

It's called AIM Express
http://www.aim.com/get_aim/express/aim_expr.adp?aolp=
 

1 more replies
Relevance 60.27%

I have 1 MAC G4 connected to my LAN. The rest are about 120 PCs with 4 NT4 & 4 Novell 5.1 servers. The MAC connected fine. The problem is that 68% of my network packets are ARP (a MAC protocol). My network traffic has at least tripled with just 1 MAC on the network.

I am using a Fluke OneTouch hardware protocol analyzer to get these stats. Before the MAC was connected the network was running mostly 802.2 & 802.3 protocols. One other fact: the MAC is using Connectix to see the NT servers. I have not yet load MAC namespace on the Novell servers.

My goal is to run IP only with 802.2.How can I reduce/eliminate the ARP traffic?

Thanks in advance,
 

More replies
Relevance 60.27%
Question: LAN Based IM

we are looking to implement a network based chat/im software that will allow better control than the current one we are using. We use PopMessenger (from LeadMind) currently. The problem is it allows anyone to chat with anyone else on the network. We want to be able to use one that allow susie to chat with her supervisor, but not her coworker. It will allow Jim to chat with his marketing groups, but not with the CSRs...You get the point. We want to stay away from the public IM's like AIM and the like. Any ideas on a better software out there??

Thanks for your help

AP
 

Answer:LAN Based IM

Many of the public IM products can be hosted on your infrastructure and
retain the concepts of Buddies and/or "Joe has sent you a message".
Contact the one you like and discuss the leasing options
 

6 more replies
Relevance 60.27%
Question: Web Based VPN/SSH?

Im looking for something that will allow users to connect using VPN or SSH without having them install software on the remote computer.

We have a ton of users and we want them to able to use network resources, but dont want to support/be liable for peoples home computers.

What are my options?

Side Note: This is not for me, it is for uneducated computer users.
 

Answer:Web Based VPN/SSH?

PuTTY Portable an option?
 

26 more replies
Relevance 60.27%
Question: PDA based Sat Nav

I've been thinking about buying sat bnav for the car and note that there are a number of PDA based options. This would seem to kill two birds with one stone, but are they any good ?

Answer:PDA based Sat Nav

I guess that's a "don't know" then ?

8 more replies
Relevance 59.45%

I was interested to know if anyone knows of any web based sites or programs that allow u to use AIM without having to install the AIM software. I work in an office behind a proxy and cannot use the standard AIM because of that. I have been using MEEBO but the IT director for my company found out and blocked that site. Myself and this director dont get along do to my knowledge of computers is vastly more extensive than his so this is his way of feeling superior. If anyone knows any sites i can use please let me kno. i do think that he has put a filter on my account to block any sites that contain AIM in the address but im willing to try anything. Also, if anyone knows anything about "SURFGUARD", which is the program that they use to control internet usage at my company, that could be helpful that knowledge would also be appreciated. Thanks

Answer:Web-based AIM programs

http://www.e-messenger.net/

3 more replies
Relevance 59.45%

Can somebody explain to me what a LAN Based Application is? I've tried to google it but cannot find nothing. I would imagine its an application that only operates within a LAN, so i.e an office, so it wont be able to communicate to another office?

Thanks
 

Answer:LAN Based Application

It is an application that runs only on a LAN (Local Area Network) without internet access.

The LAN could be small, 3 - 4 clients; or large with over 500 clients in multiple buildings.
I have worked in both situations and used propriatary applications that ran on the LAN, but were not designed to be accessed from the internet.

Video Conferencing, Remote Access Control, Gaming Servers, all started as LAN applications.

This is the best info I could find and it isn't much.
http://www.ehow.com/info_12023655_lan-based.html
 

1 more replies
Relevance 59.45%
Question: ACPI x86 Based PC

Hello, i use Windows 7 32bit and i re-installed windows 7 other day then i check device properties i srealised  that it shows Computer as ACPI x86 Based PC , before it was use to show my model number and realistic ThinkPad icon on there and also at Devices and Printers place.. i installed all drivers it doesnt show any device with (!) sign.. i dont know why i cant see realistic icon and exact model type in Devices and Printers place on Windows 7 .. can u pls help me about this problem ? and pls how can i find ThinkPad Chipset driver for Windows 7 ? i have ThinkPad SL500 , 2746 A78 modelWindows 7 32bit___________________________ thank you ..





ThinkPad X201 3680-AD6 / Intel Core i5 M560 2.67Ghz / DDR3 8GB / Intel SSD 730 Series 240GB / 12.1 WXGA 1280x800p / Dual boot Win10 Pro x64 - Ubuntu 16.04 LTS 64bit + X200 Ultrabase + ThinkVision LT2252p

Answer:ACPI x86 Based PC

You should install Thinkvantage Device Exprience to get that icon and the related functions back; http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73962

2 more replies
Relevance 59.45%

Problem:

Use AOL on-line website interface for Email.

Working on a Mac with OS X 10.8.5 (although since my AOL access is on their web interface, I could access with other machines)

I tend to access through Firefox, but I could also use a different browser if that would help.

Need to provide copies of thousands of my AOL emails due to being deposed as a witness in a business litigation case.

Question:

How can I most efficiently copy the 1000+ emails from the AOL web-based storage to something the legal types will be able to print and read?

I'd prefer not to give a 3rd party access to my email and I'd also prefer not to have to PDF print every email, especially since I've just been roped in as a witness.

Any more-clever-than-me folks have any thoughts on how to copy a large number of emails off the AOL online site?

Thanks in advance.

Answer:AOL web-based email help

First download to a client i.e. TBird. If TBird which is easier than Outlook, follow these instructions: How to Copy Thunderbird Email to a Flash Drive | eHow
They'll be in text format so receiver won't even need TBird.

2 more replies
Relevance 59.45%

Hey,

I have an MSI that installs shortcuts to the 'Start Menu' folder on a user's profile. The MSI has been assigned by GPOs to several OUs within which the shortcuts are supposed to be visible. However, when the user logs into a machine outside one of these OUs, the shortcuts are still visible. Is there any way I can assign the GPO so as to prevent this from happening? Any other workarounds?

Thanks,

pk

More replies
Relevance 59.45%

I was wondering what is an IP address based off of, is it purely based off of your ISP?
Is it based off of the router that you use?
Is it assigned to your pc?

I recently switched from TWC to DSLextreme, I am using the same router as before, and of course the same PC.
So do I have a brand new IP address or is it the same as I had before?

Answer:What is an IP Address based off of?

External IP addresses (the one the Internet sees) is assigned to you by your ISP, and I'm sure it's based on location. If you move it would change. Switching ISP's will switch your IP, switching routers / modems / computers will not.
Internal IP addresses (within your network, generally 192.168.0.x) are probably assigned to whoever connects to the network first.. I don't know

3 more replies
Relevance 59.45%
Question: web based software

I apologise if this has already been posted but after hours of shifting through useless google results I now have a headache from repeatedly headbutting the desk...lol...

What i need is a HTML based solution that when i direct a pc to a specific INTERNAL web address (10.xxx.xxx.xxx) the system gets its hardware scanned (diagnostic check) and the results displayed in the browser

the company i work for intends to do this for various OS' from Windows through Linux including NetBSD

Any suggestions on this as not all the systems support Java (hence the HTML) and preferably an open-source solution....( company is tight fisted when it comes to paying for software....)

Many thanx in advance
 

More replies
Relevance 59.45%
Relevance 59.45%

WD Diagnostic tool sees all the data intact on my HDD.
It also shows that the NTFS partition is ok.
But XP wont boot to Desktop, before than it restarts.
This 1 year old HDD showed bad SMART in POST.

Which tool now I can use to recover the data? Which tool to use in DOS mode?
 

Answer:Which DOS based Tool?

Try this http://support.wdc.com/product/downloaddetail.asp?swid=119&wdc_lang=en
 

3 more replies
Relevance 59.45%
Question: Web based storage.

Hey folks,I have a customer who's mailbox is frequently filling up because they need to receive multiple 10MB files regularly but also keep these files on the mail server for a couple of days so they can sync their laptop. They've got an allowance of 100Mb oer mailbox, but they frequently end up going over this.What I'm looking for is a web based service where files can be uploaded to an online storage system, but also where customers can log in and upload their files rather than send them via email.I've seen one at humyo.com, but was wondering if anyone used any other systems that do the same thing, and what they thought of it.Doesn't have to be free, just needs to work.Cheers.

Answer:Web based storage.

from Web Design.

1 more replies
Relevance 59.45%

Hello, i have seen this quite alot. But is it a virus or whatnot, when someone sends you a file of the net and its says like  'do i look dumb in this pic?' and with an attached file. This happens in msn live? any thoughts on what type of software could be running it etc. its really annoying.  I opened one on my virtual pc, its bad, some pritty bad stuff it sends you.

Answer:Msn, Based Virus,

http://www.msnvirusremoval.com/

1 more replies
Relevance 59.45%
Question: Dos based software

I am trying to load a dos based accountancy software from 3 disks via the A drive. The pc is windows 2000 driven and when I access the A drive and click on the install.bat file (the main file of 15) it begins to work but then a command comes up that readsc:\winnt\system32\cmd.exec:\winnt\system32\autoexec.ntSystem is not suitable for runnimg ms-dos and microsoft windows applications.I have also tried it through a dos prompt on the desktop by tryingA:\>csm/w/w"aminst.exe"but the same happens. The software is on some of our other Windows 2000 machines, but rather than getting someone in to install it I was wondering whether you could help me. ThanksJason

Answer:Dos based software

Win2000 like Win NT and currently XP are not DOS compatable. it is at the NT indicates New Technology.I am not sure about 200o the XP precursor but XP does offer a compatability check where older programs cam be checked out and if possible modified to run.Not always successful.Intiially therefor try this.Go the My Computer, Click on Help/Indexand in the field type compatability.If you get a response try it.Otherwise go the the program makers web site if they still exsist and see if a NT/2000/XP version exists

5 more replies
Relevance 59.45%

Hi,

I have a programme on my system which I just can't get rid of?
It was a CD Key changer, once extracted. it comes in 2 parts..

An application
Anicon which has the following sub MYDOCU~1\D-LOADS1\BATTLE~1.EXE


these are the basics...

The main-one is where its linked to an MS Dos which just won't go...
it keeps telling me that its not an System32 applicaton and I can't get rid off as its being used by another programme ( could this be the DOS aspect working) is there a way of finding out what other programme is using it?


Any help welcome...


Root : HKEY_CURRENT_USER
Key : Software\Microsoft\Windows\ShellNoRoam\MUICache
Entry : C:\Documents and Settings\Desktop\Battlefield 2 Keygen Serial.exe
Value : Battlefield 2 Keygen Serial
Last modified : 05.09.2005, 17:54



Root : HKEY_CURRENT_USER
Key : Software\Microsoft\Windows\ShellNoRoam\MUICache
Entry : C:\Documents and Settings\Desktop\Battlefield 2 Keygen Serial.PIF
Value : Battlefield 2 Keygen Serial
Last modified : 05.09.2005, 17:54
 

Answer:can't be rid of Dos based short-cut

Have you just tried booting in safe mode and deleting the two files you mentioned:

C:\Documents and Settings\Desktop\Battlefield 2 Keygen Serial.exe
C:\Documents and Settings\Desktop\Battlefield 2 Keygen Serial.PIF


A word of advise: do not use kegens or cracks. It is a good way to get yourself infected with malware.
 

1 more replies
Relevance 59.45%

Ok now i have got a intel base system.

I want to see what i could get for a amd system for £630.

Once i have chousen a amd system i will post both Intel based system and the Amd based system for you guys to compare.

After you guys have compared each system i will ayansily the good points and the bad points of each system and make a purchase.

Before i do this can any one recomend a amd based system for £630.

I am going to be using the pc for:

Hd video editing
Music editing
Photo editing and a bit of gaming.
 

Answer:AMD-based system for £630

Any recomendations?
 

18 more replies
Relevance 59.45%

someone told me OS 10.xx was not unix based anymore. more specifically OS 10.4. i was a big OS 9 user but kinda stopped at OS X so my knowledge of it is less that i'd like to admit. so what say ye? is Apples OS still unix based? i don't put much stock on what this person said because i am the one that gets called to fix the laptop when it stops working =P
 

Answer:OS 10.4 still unix based?

teehee

its based of BSD isnt it?
 

19 more replies
Relevance 59.45%

OK, here is what i want to do. I want to use my communications port (com1) to communicate with a demodulator to receive signals such as cordless phone, cell phone, police, cb, and weather channels. I have never attempted anything like it before, but i think it would be sweet to chill on my computer and listen to the police in the ghetto where i live. does anyone have any suggestions on what i would need to do this.


Thanks
 

Answer:PC based rf scanner

A police scanner. But you won't be able to listen to cellular or cordless phone frequencies, the FCC blocks them.
 

4 more replies
Relevance 59.45%

Am I able to work with ASP websites with Dreamweaver, or am I going to have to use Mirosoft FrontPage / Web Expressions?
 

More replies
Relevance 59.45%

Note - QuikShip demos can't be sent to web-based email accounts due to their size (about 5.5 MB total).

i got my e mail from my isp at the time subscripton -MSN- is my e mail web based?
if yes how can i get an e mail which can receive large sizes files
thanks alot
 

Answer:What is web based e mail

7 more replies
Relevance 59.45%

i have a website/forum of my own and i got this annoying little bastard that i guess is on dsl cuz he can change his IP quickly, then reregisters, so i want to file an abuse charge with his ISP, but how do i find that out?
 

Answer:find an ISP based on IP?

Keyser Söze said:





i have a website/forum of my own and i got this annoying little bastard that i guess is on dsl cuz he can change his IP quickly, then reregisters, so i want to file an abuse charge with his ISP, but how do i find that out?Click to expand...

Do a WHOIS on his IP to see if the registration information is consistent as he changes his IP. If so, you can report to the ISP listed.

If not, he's likely using a proxy.
 

1 more replies
Relevance 59.45%

Hello All,
In preparation of installing Windows 10 Anniversary Edition, I would like to change my old MBR based PC to a GPT based PC. What is the best way to accomplish this? I am already done converting all of my drives to GPT except my C: drive, do I change that before, during or after installing the new edition of Windows 10? My system is based on:

Intel Haswell i5 4690
Asus motherboard, Z-97 A
Crucial 256 GB SSD

Any help would be appreciated.

More replies
Relevance 59.45%
Relevance 59.45%

I have a really bad problem with a brand new SSD-based rig I bought from a fairly well-known guy on our Canadian buy/sell site, RFD. It is based on a Vertex 2 60 GB drive with the Sandforce controller. Here's the rest of the specs from Everest

Quadcore Intel Core i5 750, 2733 MHz
Gigabyte GA-P55A-UD3P (I'll find out if it's the Rev 2.0 shown here)
Vertex 2 SSD with Sandforce controller
4 GB G.Skill DDR3-1600 Eco 7-8-7-24
2 x ATI HD 5450 video cards

This could get long, so I apologize in advance.

This guy built me a rig a month back and when I got it, it immediately started showing me the BSOD. I told him and he took it back; he told me that he had to somehow tweak the RAM timings because he was trying a motherboard that wasn't strictly supposed to take the RAM he was using. This was a big shock to me as I never told him to save a few $$ by trying something like that. I told him before the build that stability was my #1 concern. So I get the new rig with the right mobo. No BSOD, but what immediately started happening is that the computer has these little 'mini hangs' where it just freezes up when I click on a GUI element or request a task. Never stays frozen, just hangs for 3-10 seconds. I see the little blue circle spinning. This can happen when closing a window, or when requesting some other task. It happens with multiple apps. It does not seem to me that it is happening only when I ask the SSD to access large amounts of data.

I asked the ... Read more

Answer:Bad problem with new SSD-based rig

11 more replies
Relevance 59.45%

Hello I am currently having issues with useing anything web base games or google chrome. But IE works and I can use the internet with that. I have flush my IP and DNS but that didnt fix anything.

Error 2 (net::ERR_FAILED): Unknown error.
That is the message I get when I try to use google chrome.
If I try starting up League of Legends or World of Warcraft I get this message
(Could not connect to the HTTP server. Please check that your internet connections is enable and that your firewall is not blacking access.

I dont run a fire wall
I have ventrillo and IE working for internet right now.
Anything that has a web based application will say that it is not connected to the internet.
Also I am sure I have the last IE installed.

Answer:Can only use IE and non web based programs

Update:

I currently uninstalled the latest Internet Explorer and went to the one I had before. Still have same issue.

16 more replies
Relevance 59.45%

Hello
I am running XP on a intel 1.8Ghz cpu 575 MB ram, I am the system administrator on this computer and other users are my family members. I have not gave anyone my password to avoid the problem we had with random downloads of programs over the net. Well it has happened with a program called Weatherbug and Wild Tangent. Everyone says that they did not do this and I did not install these, can some programs install without permission from administrator ?
 

Answer:xp and web based programs

WT is known to be bundled with online multiplayer games but WeatherBug I haven't heard of being part of some software. What have you installed prior to have noticed it?
 

3 more replies
Relevance 59.45%
Question: Web based reader

I am looking for a webpage based service, that exists or I can host myself, where I can upload pdf's to read.

I want to go to this site and have a library of books, click on the book, read some of it, switch devices and pick up on the same page I left off.

Does anyone know of something like this that exists? Kindle is the closest but it doesn't seem to like the pdf's I'd like to use nor is it web based.
 

Answer:Web based reader

Kindle has a web version, and it works well. However, I think the feature that you're going to have a problem with is the service remembering where you left off...
 

3 more replies
Relevance 59.45%

I'm in Canda right now, and to access Spotify and Netflix as well as blackout free games I'm changing my DNS servers to tunlr. That being said, if you use it too much as a general DNS they block you for a while.

So I was thinking... why not have custom DNS rules at the router level based on certain ports etc? For example if Spotify loads up and sends a request the router processes utilizing a different DNS server. Is this possible? What's it called? Getting sick of changing it back and forward on each computer.
 

Answer:Custom DNS based on app

I change DNS servers for my Rokus at my firewall. I just redirect traffic to any IP on TCP and UDP port 53 from a list of IP addresses (list my Roku IPs in the list). If I want to disable the DNS redirect I just remove/add them to the group.
 

2 more replies
Relevance 59.45%

I am trying to write a macro that will check a value in a column ( say < 100) and based on the answer either keep it or delete the entire row not just the data. I am trying to cull a list of any item less than a hundred in column d. Thank you

Answer:VBA to delete row based on value

The trick to deleting Rows via VBA is that they must be checked/deleted from the bottom up. If you start at the top and work your way down, a Row will be deleted, which will move all of the other Rows up at the same time that the For-Next counter increments.In other words, if you delete Row 2 when the For-Next counter is at 2, the original Row 3 will move up to replace Row 2, but the counter will increment to 3 and never check the original Row 3.So...Option Explicit
Sub DelLessThan100()
Dim lastRow, rwNum As Integer
'Determine the last Row with data in Column D
lastRow = Cells(Rows.Count, "D").End(xlUp).Row
'Loop through rows in reverse order
For rwNum = lastRow To 1 Step -1
'Delete Rows where Column D is <100
If Cells(rwNum, "D") < 100 Then
Cells(rwNum, "D").EntireRow.Delete
End If
Next
End Sub

2 more replies
Relevance 59.45%

I need to get the max number of days that an item has been open based off specific criteria.For Example:The data that is collected is for countries, status, and number of days open.I need the equation to check that all the rows with Brazil and unresolved which one has the largest number in the days open column. The spreadsheet has many countries listed so it will need to check the first 2 variables then compare them to find the max number of days. Thanks in advance on this one.

Answer:Max Value based off criteria

One way is with this Array Formula:=MAX(IF(A1:A41="Brazil",IF(B1:B41="Unresolved",C1:C41)))Enter this formula with Ctrl-Shift-Enter to place the {} around it and make it an array formula.

3 more replies
Relevance 59.45%
Question: Domain based EFS

We are looking for a domain based EFS method so that one user can encrypt something under their domain name and another domain user can log in and open what the other person saved. Does PKI allow this? We do not want to add everyone to the share list of every single file.

Answer:Domain based EFS

Look into Pretty Good Privacy...I believe they are still around...

1 more replies
Relevance 59.45%

Does anyone know of a free web based (probably java) msn messenger? I want to access msn messenger without downloading any files on my pc. Thanks in advance.

Answer:Web Based MSN Messenger?

Thanks,,,,been to that site. Seems to be a good site. Is this a time limited demo site because it tell me i have 2 days and 22 hours to use this service when i logged on and there is a registeration page link where credit card details are asked.

2 more replies
Relevance 59.45%
Question: IP based chating

I have 7 computers here in my office.  I have cable net connection.  Every system have its IP address.  I want chat with another systems through IPs.  is there any software? and free software plzzzzzz

Answer:IP based chating

http://www.majorgeeks.com/download.php?det=680

6 more replies
Relevance 59.45%
Question: Web Based Outlook

I was wondering if there were any 3rd party applications that will allow me to access my home workstation as if it was an exchange server so I can use a web browser to access my email remotely. Right now I have Outlook 2003 retrieving emails from 4 different POP3 accounts. When I am not at my desktop I typically have to check each one independently (Yahoo, Hotmail, etc...).

I know there are applications that can publish your calendar to the web to keep track of schedules and such, does anybody know how to do the same thing with email?
 

Answer:Web Based Outlook

7 more replies
Relevance 59.45%

When I am trying to use a new utility or program that I have found linked here, I am having a problem viewing/inputting commands into the program.

I click the file, and a bunch of text will scroll, and it closes.

What is the cause of this problem? How can I stop my MS-DOS programs from doing this?

Answer:Using MS-Dos Based Programs

Knowing which program it is you are trying to use would go a long way in us assisting you.

3 more replies
Relevance 59.45%

Hello everyone, I am seeking a web based software that I can handle customer database, Company assets per company, Invoicing, SLA management, Task and project management.

Open source would be nice but if not its ok.

does anyone know if any software is out there?

Answer:Looking for a web based software that can:

I think you might be looking for an ERP software package.
Here's a wiki list of various open source ones: List of ERP software packages - Wikipedia, the free encyclopedia

I, myself, have never used any of those though.

This one looks good too, www.blueboxonline.com/

4 more replies
Relevance 59.45%
Question: Browser Based FPS

I found a game while browsing the internet today.
It's the only Futuristic Browser Based First Person Shooter game there is, it uses Shockwave, the graphics are not bad.
You can connect to online games by going to Settings and clicking Networking.
Game is in beta right now, new features/maps to come later but it can be fun to play with your friends.
www.rasterwerks.com

Eh, I just thought it looked sorta cool so thought I would post it.
 

Answer:Browser Based FPS

Sounds like a great concept, but it worked about as well as I thought it would, "Internet Explorer has cause a fatal error and needs to close". And this is with a clean web browser.
 

3 more replies
Relevance 59.45%

just would like to know what web based RPG games that you enjoy most.
I would like to try it out. unoffliction wars seem to be too complicated to me. any freewares you love most
 

Answer:web based RPG games

8 more replies
Relevance 59.45%

I want to register with a non web based email that will work with windows mail. my computer is vista. when i want to send a file my email accounts are web based and do not work with windows mail- which puts the files straight into the email and I don't know how to send them.

Answer:non-web based email

Call your Internet Service provider...

1 more replies
Relevance 59.45%

Rare and long term favorite game Superfrog by Team 17 is available for PC only on DOS floppies.Can XP be configerd to run these?

Answer:Can XP run Dos based floppies?

Don't know about XP but I found getting DOS programs to run on Win98 a pretty hit-and-miss affair. It's been a while since I've done it, but I seem to remember the best way was to create an MS-DOS based floppy and copy my autoexec.bat and config.sys files to it, then boot from it. You can create a DOS boot disc from click hereMake sure config.sys has these lines in it (required to access higher and extended memory):DEVICE=C:\WINDOWS\HIMEM.SYSDEVICE=C:\WINDOWS\EMM386.EXEUnfortunately, I also remember having to fiddle around a lot (sound was often a prob) and in some cases give up. Wish you the best of luck though (I remember playing Superfrog on my Amiga, fab game!).

2 more replies
Relevance 59.45%

Can someone help me to understand the difference between Web Based and Pop 3 accounts? I recently switched from a Pop 3 ISP to Dellnet by MSN which is Web Based. Before, I could leave as many as 4,000 downloaded messages in Outlook Express without any problem. Now if I have more than 25 or 30 downloaded messages in that account, at one time, I get a complaint that there are too many messages still on the Server and they won't even allow me to send a message until I get rid of some of those downloaded messages. How can I overcome this problem? Is it possible to switch to a Pop 3 account and still stay with MSN? Also how can I get rid of Hotmail?
 

Answer:Web Based vs. Pop 3 Accounts?

11 more replies
Relevance 59.45%

Alright some of you here know I am a Firefighter and I am also our IT director. Well my Chief made me the IT guy, I told him what I was going to do, I changed over from P2P to Windows Server 2003. Now he got mad at someone for locking THEIR computer in THEIR office (not his the Chief's office) and now he wants NO PASSWORDS on any computer. Not to mention I brought my OWN server from my house and spent my money buying the parts, software, and monitor for it.
I need help with gathering all the Pro's and Con's of having a Server Based vs P2P Network.......
Please help me from not wanting to quit my job.
 

Answer:P2P vs Server Based

What's to say? The thing that springs to mind is: No good deed goes unpunished.
 

3 more replies
Relevance 59.45%

This laptop would be used for school and general use. No gaming. Running MSoft office products, SQL Server, Visio, Visual Studio, occasional VMWare, maybe enCase and/or FTK, web, gimp(rarely), etc. Would an i5 machine be good or should I go with an i7?

Answer:i5 or i7 based laptop?

VMware alone would gain the most from an i7. That's sounds like your best bet.

How much in VMware do you intend to do?

4 more replies
Relevance 59.45%

one thing i dont understand is if i want to connect to a non web based mail server i should only need the IP address right? since there is no site the mail is on but rather themail is just in________?
 

Answer:non web based e mail

look up the POP settings. non web based == POP3...
 

14 more replies
Relevance 59.45%
Question: Home based LAN

I have a desktop and a labtop connected to a router. How do I set up a local LAN so each computer can see and talk with each other?
 

Answer:Home based LAN

Make sure both of the machines are in the same workgroup. If you are using Window XP, right click on My computer, choose properties, computer name, click on Change Button. Then check/change the workgroup name.
 

1 more replies
Relevance 59.45%

i need help designing a home based security system incorporating movement activated webcams the information i need is as follows :system requirements, software, that covers a number of webcams and possibly informs a mobile or pager as to any activity. this is as yet a standalone unit but i may want to incorporate a home sound system with speakers wired to each room of the house

Answer:pc & web cam based security

best bet contact banham security from yellow pages.johnny.

1 more replies
Relevance 59.45%

i just bouht a "p4 based celeron 2.2ghz 400fsb". what does that mean? is it one of those celerons that are super easy to overclock?
 

Answer:p4 based celeron???

16 more replies
Relevance 59.45%
Question: Web-based Mail

Can anybody help me?i am just wondering if it is possible to have web based mail, such as Hotmail to run on Microsoft Outlook?If so how is this done?

Answer:Web-based Mail

click here though i maybe wrong,i think you may have to have the paid version of Hotmail to run through Outlook.

4 more replies
Relevance 59.45%
Question: Web Based Calendar

2 of my users wish to be able to go to our webpage, goto a "log in" link and log into a private online calendar that their PAs can add and change for them. They wish for it to be 100% web based.

Now I know that sharepoint can do this but its a bit over the top for 2 users. Is there anything that is free ware or that is not really expensive that you guys could recommend?
 

Answer:Web Based Calendar

SugarCRM? Google Calendar?
 

9 more replies
Relevance 59.45%

Hi all,

I am trying to access a reputable website associated with a telephone, and the site uses .XML files and .DO files.

Firefox simply pops up a screen saying open with or download to, but does NOT run the page.

IE downloads the page so the .XML file is visible.

I desperately need to visit this site, but simply can't get it to run.

Clues from my side - both browsers won't go there (although their behavior is slightly different)

Any ideas would be sincerely appreciated

Steve
 

More replies
Relevance 59.45%

Hi all.

I have a problem and dont quite know how to solve it yet and I would appreciate any help that i can get.

Recently i bought the original Xwing CD, however when I got home i found out that this is a Dos based game and therefore wont run under XP. I have tried changing the compatibility to Win 95 but this doesnt work, it keeps telling me i do not have enough 'EMS Memory' and cannot run Xwing without it... how can i change these settings so i can play this game which used to give me hours of dubbed sound effects and talking to people like i had a steel bucket over my head.

All joking aside though is there away of using a command prompt outside of windows XP as in 95/ 98 and others you could always restart in Dos, and as everyone now knows you cannot do this in XP.

Any help is greatly appreciated.

JimmyBoroFan
 

Answer:Dos based games in XP...

http://www.majorgeeks.com/DOSBox_d4381.html
 

1 more replies
Relevance 59.45%
Question: Dos Based Programs

Just got a new computer xp pro. I have some dos programs and want to know if they can be used.

Answer:Dos Based Programs

Sometimes, yes. More info can be found HERE.

3 more replies
Relevance 59.45%

I received two IM's telling me to open up a .pif file, but a friend warned it was a virus.

Not quite sure what the whole name was, I closed the convos.

Just wanted to warn you all.
 

More replies
Relevance 59.45%
Question: web-based email

Hi GuysIs there a anti virus program for scanning web-based emails . Thanks

Answer:web-based email

Hello Mate this may be of interest click hereCheers Kev

1 more replies
Relevance 59.45%
Question: Outlook Web-based

I have a question about outlook that is web based. I work for a company that actually moves to different companys and takes over departments, kind of like mangers persay`. Anywho my company well call it 'X' has a web based outlook program, also the company i am working for 'Z' also has a web based outlook email. Now i am wondering if there is a way to get both outlook accounts to my computer ie outlook express. Do you have an idea on how to do this?
 

Answer:Outlook Web-based

only if both accounts support POP3 access as well. You can just set up 2 new accounts in outlook with usernames, passwords, POP3 & SMTP addresses and they will both download to your inbox when you send/receive mail. Remember that when you send mail though, it will only be from your default mail account. That doesn't mean you can't change which is the default account before you send of course.
 

2 more replies
Relevance 59.45%

this is the browser i use actually available for 32 and 64bits systems

"Why settle for a basic build of your Firefox browser on Windows Operating Systems when you can have one that is specifically made for getting the most out of your system? Mozilla does not provide optimized browser packages for Windows, meaning you may be losing speed and efficiency when you use your browser; and truth be told, most people use their browsers all the time! That needs to change, so, here is the Pale Moon project: Custom-built and optimized Firefox browsers for Windows Operating Systems. Make sure to get the most speed and efficiency out of your browser!"

Website: http://www.palemoon.org/
Download 32 bits: http://www.palemoon.org/download-v4.shtml
Download 64 bits: http://www.palemoon.org/palemoon-x64.shtml

Adobe flash square for x64: http://labs.adobe.com/technologies/flashplayer10/square/

all FF addons are functional, enjoy ^^
 

Answer:Palemoon 5 (FF based)

I've used Palemoon before, it's a great product, however I really like Chrome and will continue to use it. I might consider it some other time though.
 

6 more replies
Relevance 59.45%
Question: Web Based Email

I'm attempting to create a "Contact Page" for my web site. With it, I'm trying to send IP address with the email that they send.

Below listed is the code that I've scored from various places, but I for one, don't know much about php, and two, can't seem to figure this one out... any help would be appreciated.

on my site, I'll load the file contactpage.php - and in this contactpage.php I currently have:
PHP:

<?     $ipnamex getenv ("REMOTE_ADDR"); 

         
$ipsystem gethostbyaddr($ipnamex);

         
$ipaddr $ipnamex;

 
?>

<html>

<b... Read more

Answer:Web Based Email

16 more replies
Relevance 59.45%
Question: Irc Based Game

Ok here's the deal:

I play an rpg that uses an IRC based client, but because I have a network: Anyone else one the network who tries to logon, can't logon do to the sharing of one IP. I remember running into this problem in the past and found a program that allowed me to select certain programs to use a proxy, but only those selected programs, not everything on the computer. I cannot, however, find this program again... . I search all over C/NET for it but after an hour of searching (I know I know... im stuborn) I gave up.

Does anyone know of where I can find such a program?

EDIT: If you want the URL for this game (as proof of such), feel free to PM me. I didn't post it in here, as I didn't want to get in trouble for SPAM.

Thanks ahead of time,
WlkingMan

More replies
Relevance 59.45%
Question: web-based emails

Are there any web-based email programs that allow you to insert a jpg into the message, not as an attachment.
 

Answer:web-based emails

15 more replies
Relevance 59.45%
Question: Web based surveys

I am looking to set up a survey on our website, but am completely confused and uneducated as to which packeage to use. Can someone please help an ignoramus. PS I don't want to spend an enormous ammount, but need something that looks good and works

Answer:Web based surveys

does your web host support either CGI or PHP ?If they do, you can use any one of a great many freely available scripts.If they don't, processing the poll/survey submissions will be more difficult.If you want a poll, just like the PC Advisor poll, perhaps you could confirm this. Likewise, if you would prefer a more comprehensive survey in the form of a questionnaire, it would help to know.Poll scripts are not the same as a more complex form used for question and answer surveys.Try these to begin with:click hereclick hereBoth of the above require PHP with a MySQL database.click here this one requires PHP to run, but the poll does not need a MySQL database.click here has a small application called Survey Generator, again in PHP.Chipmunk Poll is click hereAplomb Poll is click here and is pretty impressive - PHP but no database required.Simple Poll is click hereFor a wide selection of CGI and PHP scripts you can try Hotscripts for a ton of alternatives:CGI: click herePHP: click hereThe direct links I've given above are all for Open Source solutions, so you won't have to get your wallet out.If your web server does not support CGI and/or PHP, there are third party poll/survey scripts that are hosted separately from your site but included on your pages, but I don't suggest any of them since all of them that I have seen are advertisement driven.Finally, if your web host supports FrontPage Server Extensions and you have FrontPage, you could always just design a form that does what you ... Read more

9 more replies
Relevance 59.45%

Does anyone know of a FTP server, for windows, that has some type of a web based management utitlity. By web based i mean some type of a client that is logged into similarly to like a linksys router or something similar. I've been seaching around for a while but can't seem to find much.

Thanks
 

Answer:Web based FTP server

I'm not sure it supports FTP, but the little I've seen of this, it's great.

http://www.badblue.com/
 

3 more replies