Computer Support Forum

Event Log 7031 Errors on Shutdown

Question: Event Log 7031 Errors on Shutdown

This appears to be a general issue with windows 10, I always get the following errors on shutdown:

The VMware Workstation Server service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.

The User Data Access_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The User Data Storage_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The Contact Data_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The Sync Host_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

I suspect the Event ID 7031 Service Control Manager errors occurred initially in windows 8.1 upgrade and was resolved by Microsoft. It looks like the problem is back especially with the new windows 10 services (with the exception of the VMWare Workstation server)

I suspect this error also affects shutdown/reboot times.

Ideas anyone how to resolve this

More replies
Relevance 100%
Preferred Solution: Event Log 7031 Errors on Shutdown

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 85.26%

I moved this post from general discussions where it got completely buried.

I'm sure every one of us is getting these errors in windows 10

This appears to be a general issue with windows 10, I always get the following errors on shutdown:

The VMware Workstation Server service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.

The User Data Access_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The User Data Storage_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The Contact Data_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The Sync Host_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

I suspect the Event ID 7031 Service Control Manager errors occurred initially in windows 8.1 upgrade and was resolved by Microsoft. It looks like the problem is back especially with the new windows 10 services (with the exception of the VMWare Workstation server)

I suspect this error also affects shutdown/reboot times.

Ideas anyone how to resolve this

Answer:Event Log 7031 Errors on Shutdown

getting this also - on laptop and home pc

1 more replies
Relevance 96.76%

Hi! I have an issue with Windows 10 Pro that causes Windows Media Player to stop playing whatever it is playing and Windows Media Center Extender (Xbox360) to crash (yes I got WMC and extenders to work on Windows 10) that I have determined to be caused by the following event viewer errors/warnings. I hope that if I can fix these errors/warnings my problem will no longer occur. Event ID's: 117, 7031, and 10010 occur when WMC crashes whilst Event ID's 107 and 113 occur beforehand (these warnings might not matter at all).






Event ID: 107
Source: Media Center Extender
Warning
An unauthorized window was detected while running Windows Media Center, 'Windows Media Center', with file name 'C:\Windows\ehome\ehshell.exe'.








Event ID: 113
Warning
Source: Media Center Extender
Experience enforcement resources could not be loaded.








Event ID: 117
Warning
Source: Media Center Extender
The Media Center Extender user was abruptly disconnected.








Event ID: 7031
Error
Source: Service Control Manager
The Sync Host_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.








Event ID 10010
Error
Source: DistributedCOM
The server {784E29F4-5EBE-4279-9948-1E8FE941646D} did not register with DCOM within the required timeout.



I ch... Read more

More replies
Relevance 77.08%

The only constant errors I get when I reboot are these four, that all share the same ID of 7031.

The Contact Data_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The Sync Host_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The User Data Access_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The User Data Storage_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

Is there anyway to fix these, or better just leaving them be?

Answer:Anyone know how to fix Event ID 7031?

I also get these as well as one from VMware. Most people think they get generated when you start Windows. In fact, they are generated when you shutdown or restart Windows. To see this start Windows and wait about 5 minutes. Restart Windows and look at the time stamp on the event error message. It is the time when you shutdown not when you just restarted.

It seems that these services after being terminated by the shutdown want to start up again in the time specified. Of course they can't because they are shutting down. The problem is most likely with the service not the shutdown procedure.

As the errors are generated at shutdown I wouldn't worry about them. If they were generated at startup then I would have an issue with them. Some folks have disabled the services involved via their Registry entries as they don't show up when you run services.msc. I'd advise not to do this.

So in a nutshell, it is a bug but nothing I would worry about.

8 more replies
Relevance 77.08%

The only constant errors I get when I reboot are these four, that all share the same ID of 7031.

The Contact Data_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The Sync Host_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The User Data Access_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The User Data Storage_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

Is there anyway to fix these, or better just leaving them be?

Answer:Anyone know how to fix Event ID 7031?

I also get these as well as one from VMware. Most people think they get generated when you start Windows. In fact, they are generated when you shutdown or restart Windows. To see this start Windows and wait about 5 minutes. Restart Windows and look at the time stamp on the event error message. It is the time when you shutdown not when you just restarted.

It seems that these services after being terminated by the shutdown want to start up again in the time specified. Of course they can't because they are shutting down. The problem is most likely with the service not the shutdown procedure.

As the errors are generated at shutdown I wouldn't worry about them. If they were generated at startup then I would have an issue with them. Some folks have disabled the services involved via their Registry entries as they don't show up when you run services.msc. I'd advise not to do this.

So in a nutshell, it is a bug but nothing I would worry about.

18 more replies
Relevance 75.44%

Hi Everyone, i must say i am so relifed to see this forum . I have one problem and dont hava any idea how to fix it. As you can see from the title its about print spooler. Printer is attached to desktop mashine and its shared. My Laptop use that shared printer and also using pdf2xls printer. Whena i want to use pdf2xls printer my printer spooler stops. From event logs i get the following error:
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7031
Date: 07/07/2010
Time: 14:49:27
User: N/A
Computer: JFSMAINSERVER
Description:
The Print Spooler service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
PLS HELP

Answer:Print Spooler Event id: 7031

Hi Sarajevo,

I'm not familiar with the pdf2xls program. But here's a few ideas.
* If you uninstall it does the issue continue with the other printer? If so, it's unlikely (but not guaranteed )that the pdf2xls program is your issue.
* Perhaps pdf2xls does not have permission to write to %systemroot%\system32\spool folder
* try to uninstall it and re-install it with as an elevated Administrator prompt by right clicking on the file and selecting RUN AS ADMINISTRATOR, and run it in XP Sp3 compatibility mode. (i.e. set them both up and run).
* Once you've completed the point above, do the same to the pdf2xls.exe before you run the program.

-Timo

PS: If there are any unprinted files stuck in the spooler that you can't remove, run the attached batch file as an elevated administrator to remove the stuck files.

3 more replies
Relevance 74.62%

Hi,

I check and found this annoying code in the Event Viewer...

The Event ID code is the same but with different explanation and usually come in group..This happened to me usually after restart....

1. Event ID 7031.... The Sync Host_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

2. Event ID 7031....The Contact Data_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

3. Event ID 7031....The User Data Storage_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

All these are on the Error Level... not warning...

Anybody know what happen and how to solve this???

Answer:Event ID 7031 Service Control Manager

Solved Errors persisting in windows 10 even after clean install. Help needed! - Windows 10 Forums

2 more replies
Relevance 73.8%

I want to stop error code 7031 from showing up in the event viewer log in win 10 (since its a redundant code that means nothing anyway), so does anyone know the steps (and explain in layman terms) to prevent it from posting. I do not mean just filtering it unless that is all that can be done, I want it gone. Thanks

Answer:Stop Logging a Specific Event Error - 7031

Really, no one knows how to block events from posting?

1 more replies
Relevance 72.16%

I have cleaned up most of my errors but these four keep being produced at shutdown in the System log.
Event Id 7031 service terminated unexpectedly.
User Data Access_Session2
User Data Storage_Session1
Contact Data_Session1
Sync Host_Session1

Anyone else got these?
What are they?
Anyone know what to do to stop them?

OK, they don't seem to be doing any harm but it is nice to keep a tidy ship!

PS got rid of a long list of DCOM errors relating to the Runtime Broker CLSID. That was satisfying!

Answer:Eventid 7031 errors

i have same problems " user data".
can anyone solve them?

for DCOM e CLSID problems, error id 10016, i solve with this on windows 10 :
Solved Numerous event id 10016 errors win 8 pro 64 bit

7 more replies
Relevance 71.34%

Windows 10 64 bit, latest version, is working fine on my Toshiba i7 laptop with 8 Gb ram. But I have problems with shutdowns when I click on restart. It seems to take far too long to shutdown. I am not sure how to find out why but when checking out the event viewer, I found several shutdown errors (some critical and some warnings). So I got the following screen shots (not sure how I got there) which seem to reveal several errors during shutdown. When I click on the web link I get a non working website.

Question:
1. How do I find out what is making shutdowns so slow when I click restart? (I "think" Shutdown seems faster if I just click on shutdown instead of restart)
2. What problem do these screenshots of error indicate and how do I fix them?
Thank you
Edit:
Got to those screens: Control Panel - Administrative Tools - Component services. Event viewer(Local) -Applications and Services Logs - Microsoft -Windows - Diagnostics Performance - Operational.

Here are some recent error screenshots which occur in both shutdown and bootups.
As can be seen this is a problem that goes back to 2016.

More replies
Relevance 68.47%

i have noticed that my computer has been taking longer to start up and shut down lately. i have used all my resources to see and control what i am running on startup, from msconfig to spybot's startup manager, there's not a lot running there so i went to check the event viewer and it's full of errors, critical events and warnings.

I tried using MS's websites for help but they are a nightmare to use, posted this same entry in their forums but no answer yet. I'll appreciate if you can help me understand what's going on with my computer. Thanks in advance

the last critical event reads as follows (the OS is in spanish so i'll translate to what i think it should be):

Windows has started up:

Boot duration : 135986ms
IsDegradation : true
Incident Time (UTC) : 27/04/2008 05:35:27 p.m.

Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
Source: Diagnostics-Performance
Date: 27/04/2008 12:38:01 p.m.
Event ID: 100
Task Category: Boot Performance Monitoring
Level: Critical
Keywords: Event Log
User: LOCAL SERVICE
Computer: (name deleted by me)


EventData

BootTsVersion 2
BootStartTime 2008-04-27T17:35:27.656Z
BootEndTime 2008-04-27T17:37:54.087Z
SystemBootInstance 512
UserBootInstance 493
BootTime 135986
MainPathBootTime 53423
BootKernelInitTime 15
BootDriverInitTime 3316
BootDevicesInitTime 5470
BootPrefetchInitTime 90685
BootPrefetchBytes 446992384
BootAutoChkTime 0
BootSm... Read more

Answer:Event viewer reports errors and critical events on boot and shutdown

the system specs in case t hey are useful at all:

DELL vostro 400
Intel core 2 Duo E6750 @ 2.66 ghz
2GB RAM

i tried to edit the previous post and there was a time limit, sorry for bumping this

1 more replies
Relevance 59.04%

Hi all,

I've just built an AcerPower F6 desktop to Win 7 Pro 32 every shutdown it shows BSOD and promptly restarts.

Event log is showing me the following for a critical event at the same time the shutdown occurs (The date on the log is from a week ago but this happens every shutdown which is once every weekday):

Log Name: System
Source: Microsoft-Windows-Kernel-Processor-Power
Date: 14/03/2014 13:19:19
Event ID: 6
Task Category: (6)
Level: Error
Keywords:
User: SYSTEM
Computer: CUR-ICT-01.LODGEFARM.LOCAL
Description:
Some processor performance power management features have been disabled due to a known firmware problem. Check with the computer manufacturer for updated firmware.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Processor-Power" Guid="{0F67E49F-FE51-4E9F-B490-6F2948CC6027}" />
<EventID>6</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>6</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-03-14T13:19:19.519629700Z" />
<EventRecordID>5118</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="52" />
<Channel>System</Channel>
<Computer>CUR-ICT-01.LODGEFARM.LOCAL</Computer>
<Security UserID="S-1-5-18" /&g... Read more

Answer:BSOD on Shutdown Event Log = Kernel-Processor-Power. Event ID: 6

Your NI Measurement Studio driver appears to be causing problems.


Code:
Probably caused by : NIPALK.sys
It's outdated by 11 years, if you wish to keep the program I suggest you update the driver.


Code:
88a32000 88aab000 NIPALK T (no symbols)
Loaded symbol image file: NIPALK.sys
Image path: \SystemRoot\System32\Drivers\NIPALK.sys
Image name: NIPALK.sys
Timestamp: Mon May 12 22:21:05 2003 (3EC01041)
CheckSum: 0007ACFC
ImageSize: 00079000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please remove it or update it from the following link.

NI Measurement Studio - National Instruments

EDIT, there is a fix you can download which prevents file corruption, if you can't find an updated driver then download this.

http://digital.ni.com/public.nsf/web...C?OpenDocument

3 more replies
Relevance 59.04%

Hi,
keep getting the errors above every startup regarding;
11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.
Context: Application, SystemIndex Catalog
Details:
(HRESULT : 0x80004005) (0x80004005)"
I have 3 admin user profiles.
Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch event viewer or mouse customisation softwares, they freeze temporarily and ... Read more

Answer:Windows 7: Event errors (11, 7000, 7026), intellipoint and event viewer freeze.

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

7 more replies
Relevance 59.04%

Hi,

I was hoping somebody could offer an insight on the below, as searching around I've not found much to go on other than "overheating"

Basically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words) For example, see how hot the machine gets just by resuming from a sleep (this is all within a minute or so):



I have been seeing the following error in event viewer each time I start Windows (4 entries) for some time:



So today I bit the bullet and had the back cover off the laptop and noticed what a bad state the thermal compound was in, for both the CPU and the chipset chip, so wiped it off using TIM Cleaner, and then applied new thermal compound and put the laptop back together. I was actually shocked because for the first time since I can remember, I could feel cold air blowing from the vents of my laptop! I logged into Windows and noticed that my temperatures had fallen and were staying at around the below:



Not as low as I'd like but a massive improvement. Trouble is, I am still getting the WHEA-Logger event errors in Windows Event Viewer ('processor core') and wondered if this was not in regards to overheating after all?

The plus side is my laptop is now almost totally silent - the way it must have been when I bought it new 3 years ago! But I was wondering how to investigate these WHEA-Logger errors, if anyone has any advice that'd be great.

... Read more

Answer:WHEA-Logger event 18/19 errors in Event Viewer (W7 Home Premium)

First, well done on applying the thermal paste to the cpu/gpu. I assume you cleaned the vents as well. Did you use arctic silver 5 (just curious)?

I wonder if the processor could have been damaged from the heat. Are you experiencing any BSODs or other problems? You can run Prime95 to test your system. And Furmark for gpu.

2 more replies
Relevance 59.04%

Hi,

keep getting the errors above every startup regarding;

11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.

Context: Application, SystemIndex Catalog

Details:
(HRESULT : 0x80004005) (0x80004005)"

I have 3 admin user profiles.

Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch ... Read more

More replies
Relevance 59.04%

Hi,

keep getting the errors above every startup regarding;

11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.

Context: Application, SystemIndex Catalog

Details:
(HRESULT : 0x80004005) (0x80004005)"

I have 3 admin user profiles.

Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch ... Read more

Answer:Event errors (11, 7000, 7026), intellipoint and event viewer freeze.

Hiya and welcome to SevenForums!
Please contact an admin to move this thread, because this isn't the appropriate section for these kinds of problems.

4 more replies
Relevance 58.63%

Out of the blue I get 3 event errors when I boot up my Home Premium 64 bit. First time in two years.

Event ID 7006:
The ScRegSetValueExW call failed for FailureActions with the following error:
Access is denied.

I don't have AVG. I have Agnitum Firewall, Panda Antivirus (Free).

Event ID 7009:

A timeout was reached (30000 milliseconds) while waiting for the IPsec Policy Agent service to connect.

Event ID 7000:

The IPsec Policy Agent service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.

When I checked the windows services table, I noticed that IPsec has in fact been started but probably not in a timely fashion. How do I get rid of these 3 annoying errors although I don't notice any performance problems in my laptop?

Thanks in advance for your help.

Answer:Three event errors on bootup: Event ID 7006, 7000 and 7009

Hi Atom.

"Event ID 7006:
The ScRegSetValueExW call failed for FailureActions with the following error:
Access is denied."

These events are normal because of Panda Cloud Antivirus' self-protection feature.

"Event ID 7009:

A timeout was reached (30000 milliseconds) while waiting for the IPsec Policy Agent service to connect."

Follow the instructions from here:

Event ID 7009 — Basic Service Operations

You can put new value as 60000 instead of 30000.

The Event ID 7000 should disappear when you boot your laptop next time.

Hope this helps.

1 more replies
Relevance 58.63%

Hello everyone,

I keep seeing this error appear several times a day, even during idle, in my Event Viewer. I did a clean install of build 10586 less than a month ago. I'm not having any overt issues yet, but the error is disturbing.

SettingSyncHost (9144) {979B90BD-0F81-4D83-B038-62032DD17C47}: Database C:\Users\xxxxx\AppData\Local\Microsoft\Windows\SettingSync\metastore\meta.edb: Index deleteDetection of table items is corrupted (0).
I have spent a few hours researching this and I can't find any reports of similar issues or even what the file metastore\meta.edb is for. Is this hopefully one I can just rename and it'll automatically create a new one?

Answer:Event Viewer Errors: SettingSyncHost, Source ESENT, Event 467

Bump... anyone have any idea? I keep getting it averaging about once an hour.

EDIT: Sorry, forgot to add, already tried /sfc scannow, it doesn't find the error.

2 more replies
Relevance 58.63%

EDIT: ARGH, sorry, meant to post this in General Discussion forum, I have no idea if it is a network issue.

Hello everyone,

I keep seeing this error appear several times a day, even during idle, in my Event Viewer. I did a clean install of build 10586 less than a month ago. I'm not having any overt issues yet, but the error is disturbing.

SettingSyncHost (9144) {979B90BD-0F81-4D83-B038-62032DD17C47}: Database C:\Users\xxxxx\AppData\Local\Microsoft\Windows\SettingSync\metastore\meta.edb: Index deleteDetection of table items is corrupted (0).
I have spent a few hours researching this and I can't find any reports of similar issues or even what the file metastore\meta.edb is for. Is this hopefully one I can just rename and it'll automatically create a new one?

More replies
Relevance 58.63%

EDIT: ARGH, sorry, meant to post this in General Discussion forum, I have no idea if it is a network issue.

Hello everyone,

I keep seeing this error appear several times a day, even during idle, in my Event Viewer. I did a clean install of build 10586 less than a month ago. I'm not having any overt issues yet, but the error is disturbing.

SettingSyncHost (9144) {979B90BD-0F81-4D83-B038-62032DD17C47}: Database C:\Users\xxxxx\AppData\Local\Microsoft\Windows\SettingSync\metastore\meta.edb: Index deleteDetection of table items is corrupted (0).
I have spent a few hours researching this and I can't find any reports of similar issues or even what the file metastore\meta.edb is for. Is this hopefully one I can just rename and it'll automatically create a new one?

More replies
Relevance 58.63%

Hi.
I have noticed that during the long duration my PC is on (18 hours), several apps keep getting crash. Even after I restart these apps, they will eventually crash. PC is still functioning.
The apps that are crashing are:

Asus AI Suite 2 (I use it for fan control)Corsair Utility Engine - for my mechanical gaming keyboardBitdefender - The Antivirus software doesn't really crash, but it's a module inside BitDefender that has issues.
Bellow are all three event viewer reports for all mentioned apps.
1. Asus AI
Faulting application name: AI Suite II.exe, version: 2.0.0.0, time stamp: 0x00000000
Faulting module name: KERNELBASE.dll, version: 10.0.15063.296, time stamp: 0x28e9cf15
Exception code: 0x0eedfade
Fault offset: 0x000eb802
Faulting process id: 0x3600
Faulting application start time: 0x01d2ee6667bfdd12
Faulting application path: C:\Program Files (x86)\ASUS\AI Suite III\AI Suite II.exe
Faulting module path: C:\WINDOWS\System32\KERNELBASE.dll
Report Id: 64c7a38e-b13e-42ba-bf9f-4b4e72c0cc4b
Faulting package full name:
Faulting package-relative application ID:
2. Corsair Utility Engine
Faulting application name: CorsairHID.exe, version: 1.16.42.0, time stamp: 0x56f25dd3
Faulting module name: ntdll.dll, version: 10.0.15063.0, time stamp: 0xa82cc161
Exception code: 0xc0000005
Fault offset: 0x0005d9f4
Faulting process id: 0x3190
Faulting application start time: 0x01d2eccfcf3748b1
Faulting application path: C:\Program Files (x86)\Corsair\Corsair Utility Engine\CorsairHID.exe
... Read more

Answer:Multiple Application Errors (Event 1000) in Event Viewer

Please use this link to create a zip file so that we can troubleshoot the bsod minidump files and the logs:
BSOD - Posting Instructions - Windows 10 Forums

Please change the default language to English so that we will be able to read and troubleshoot the logs.

2 more replies
Relevance 58.63%

The master browser has received a server announcement from the computer MATTSLAPTOP that believes that it is the master browser for the domain on transport NetBT_Tcpip_{18E5B85E-1249-4040-9EF0-5B1F93A7295B}. The master browser is stopping or an election is being forced.



...wtf.
 

Answer:odd event viewer event. my brothers laptop causes errors on my machine?

http://support.microsoft.com/default.aspx?scid=kb;en-us;135464
 

1 more replies
Relevance 58.22%

My computer seemed to be running more slowly after the Creators update, so I went into the error viewer and found a ton of errors with the source EapHost, Event ID 2002. From Googling around, I found that this error can be caused by leftover keys from Cisco software, so I went ahead and deleted two of the keys referred to in the error logs, and the errors associated with those keys stopped popping up. However, there's a third error that keeps popping up:

Skipping: Eap method DLL path validation failed. Error: typeId=21, authorId=311, vendorId=0, vendorType=0

The trouble is that this doesn't give me enough information to figure out which key I need to delete. It refers me to a node in the registry called WLANProfileCreationUXAuth. There are six subfolders under that one, and some of them contain keys that I can't delete. (Stupidly, I tried, but the system wouldn't let me.)

What I'm wondering is this: how can I figure out which of the specific keys I need to delete? None of them refer to Cisco, as far as I can see.

More replies
Relevance 58.22%

I am getting lots of critical errors in the event viewer. Event ID = 100, 200, 400, 307, 402.... (Below are the details for a couple of them). I have seen several posts on the web for this issue but no solutions. It seems to be an issue that affects a lot of vista installs on all different pc / laptops. I'm running an IBM (lenovo) T61 laptop. I don't know if these issues are related but frequently when I reboot the laptop it will hang during the boot up. When this happens I need to Hard Boot the laptop, I will then get the message that windows did not shut down correctly and asks to 1) run a repair restore or 2) boot window normal. Sometimes I need to do this several times before it will boot up. I?m afraid the day is coming where it will not boot up at all.

I would appreciate any information someone might have.

Thanks...

****Event ID = 200****
Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
Source: Microsoft-Windows-Diagnostics-Performance
Date: 1/26/2009 9:02:57 AM
Event ID: 200
Task Category: Shutdown Performance Monitoring
Level: Critical
Keywords: Event Log
User: LOCAL SERVICE
Computer: xxxx
Description:
Windows has shutdown:
Shutdown Duration : 153587ms
IsDegradation : false
Incident Time (UTC) : 1/26/2009 3:17:21 PM
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windo... Read more

Answer:Boot up Issues - Critical Event Log errors - Event ID = 100, 200, 400, 307, 402

Originally Posted by mehowe


****Event ID = 400****
Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
Source: Microsoft-Windows-Diagnostics-Performance
Date: 2/15/2009 9:51:42 AM
Event ID: 400
Task Category: System Performance Monitoring
Level: Critical
Keywords: Event Log
User: LOCAL SERVICE
Computer: xxxxx
Description:
Information about the system performance monitoring event:
Scenario : System Responsiveness
Analysis result : Analysis could not be performed in time. There is a possible serious performance issue
Incident Time (UTC) : 2/15/2009 2:49:26 PM
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Diagnostics-Performance" Guid="{cfc18ec0-96b1-4eba-961b-622caee05b0a}" />
<EventID>400</EventID>
<Version>1</Version>
<Level>1</Level>
<Task>4005</Task>
<Opcode>37</Opcode>
<Keywords>0x8000000000010000</Keywords>
<TimeCreated SystemTime="2009-02-15T14:51:42.799Z" />
<EventRecordID>1693</EventRecordID>
<Correlation ActivityID="{00000000-A6C8-0000-2155-6BAA7B8FC901}" />
<Execution ProcessID="2016" ThreadID="2216" />
<Channel>Microsoft-Windows-Diagnostics-Performance/Operational</Channel>
<Computer>xxxxx</Computer>
<Security UserID="S-1-5-19" />
&l... Read more

1 more replies
Relevance 57.4%

Greetings Gents


? Windows 7 ultimate
? x64
? it was vista upgraded to 7
? full retail version
? 2009
? 2010
? Intel(R) Core(TM)2 Quad CPU Q9100 @ 2.26GHz
? NVIDIA GeForce GTX 260M
? Alienware M17x
? FLEXTRONICS 19.5 v *12.3 a = 239.85 w

Summery:
out of sudden when i playing mkv or .avi media it stopped working and force me to total shutdown the system. To be precise, I never faced the BOSD; yet I know it the same/equivalent to it. I am seeking your help gents :D

kindly find the attached

thank you & your rapid response is highly appreciated.

Answer:BSOD - Event ID 6008 Previous Shutdown was Unexpected - need total shutdown

Hi -

Most of the 11 BSODs list NVIDIA video as the probable cause.

1. Update your NVIDIA video drivers -

Code:

nvlddmkm.sys Tue Mar 16 22:00:40 2010 (4BA037C8)
nvBridge.kmd Tue Mar 16 21:31:37 2010 (4BA030F9)

NVIDIA --> http://www.nvidia.com/Download/index.aspx?lang=en-us

One of the BSODs had a bugcheck = 0x124 = WHEA = Windows Hardware Error Architecture - potential hardware failure

Info on 0x124 --> http://www.sevenforums.com/crash-loc...-what-try.html

2. Remove Daemon Tools/ Alcohol 120. A driver common to both sptd.sys is known to cause BSODs.

3. Update your ESET installation to v4.2.64.12 --> http://www.eset.com/download

You need device driver updates. Alienware Support sends me to Dell Support -

http://support.dell.com/support/down...nConsent=False

4. Update all device drivers - chipset (NVIDIA & Ricoh), audio, network. DO NOT download the NVIDIA Video driver from Dell - go to NVIDIA Support per step #1 above.

Windbg Logs
--> http://jcgriff2.com/dbug_logs/_99-db..._jcgriff2_.txt
--> http://jcgriff2.com/dbug_logs/_99-db...riff2_.txt.zip


If BSODs persist after driver updates, run the Driver Verifier --> http://jcgriff2.com/driver_verifier.htm

Regards. . .

jcgriff2

`


BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Aug 17 21:36:50.639 2010 (GMT-4)
System Uptime: 0 days 3:49:08.761
*** WARNING: Unable to verify tim... Read more

2 more replies
Relevance 54.53%

Wake from sleep is slow and I loose control over curser for 10 sec.

These are most of the errors and their numbers that I have been getting over the past 5 days.

Boot duration 100,101,109,103
Stanby duration 300


Driver caused delay
351 Thumbdrive driver delay
302 Peer-to-Peer Tunneling Protocol
302 RAS SSTP Miniport Call Manager
302 NVIDIA MCP Networking Function Driver
351 ACPI Driver for NT
302 RICOH SD/MMC Driver
Shut down delay 200, 201
Shut down caused by Services delays 203 many different services


I have done the boot and shutdown trace (Gathering a Startup, Shutdown, Sleep, Hibernate, or Reboot Trace[2]=Performance%20Maintenance) and have pm'ed you the link.

I am doing a clean install and would like to get these errors handled before I make an Image.
Thanks for your help!

Answer:Boot errors,shutdown errors, wake errors.

Those numbers are in milliseconds, so all of them added up isn't going to amount to anything. Your trace didn't merge (you have a kmode and a umode .etl file), so I'm merging this manually (meaning I may be missing some portion of the data - I would hope not, but it is possible). There are a couple of things here (the nvidia driver is causing network stack delays during boot, disk fragmentation is apparent, especially in the MFT, Windows Defender is enabled and scanning, heavily, during boot, etc), but I did find something interesting. the xmarks IE add-in seems to cause about a 10 second driver request at about the same time csc is loading, which also occurs at around the same time that an svchost is doing a scan of the registry (and a lot of random writes during read). I also notice that the system spends a lot of time on D:, but the disk information says the partition is C: on a Fujitsu MHW2160BH - that seems a bit odd, so I'm wondering which is which.

Ultimately, however, I am not sure it's anything you've done, per se, but it's a convergence of things here that are conspiring to slow your system. It might make sense to do a few things:
Stop/Disable Windows Defender, and replace it with an actual antivirus/antimalware product like Avast, MSE, etc.
Disable/remove xmarks temporarily - it's not doing you any favors
Run a manual disk defragmentation pass, and then defragment free space as well with defrag.exe (see /? for options)
Make sure your nvidia drivers are up to ... Read more

5 more replies
Relevance 52.89%

EDIT: 11/21 The latest thing it says is windows did not shut down successfully because the system stopped responding. Anyone?
After PC is left unattended more than an hour or so it gets a black screen with no error messages, but the CPU and fans are powered up. I must power off and cold start. Usually it takes 3 or 4 tries to get a successful boot, and when I do I get a message that says windows did not shutdown successfully.

The windows error log says the problem is shut down unexpectedly, event name bluescreen, OS version 6.1.7601.2.1.768.3 Locale ID 1033. (Windows Home Premium)

I have all power, sleep, and hibernate options set to never. I have run the memory test and it is OK. I have also run a windows integrity scan which said no corruptions in windows integrity.

I'd really appreciate a hand with this issue. Thanks.

Edit: Although at the top of the post I said "after an hour or so" that is not always so. A more accurate description would be after leaving the PC unattended for several hours.

Answer:Shutdown Unexpectedly, & Windows Did Not Shutdown Successfully Errors

EDIT: 11/21 The latest thing it says is windows did not shut down successfully because the system stopped responding. Anyone?

1 more replies
Relevance 50.43%
Question: Shutdown Event

Hardware: IBMPentium(R) 4 CPU 2.6GH1.99 GHz1 GIG RAMXP HOME VERSION SP3Error message I keep getting: "Event provider attempted to register query "%1" whose target class "%2" does not exist.  The query will be ignored."Explanation: "An erroneous dependcey for the class in the query no longer exists, a missing class definition."This has occurred with Firefox crashing, Internet Explorer crashing (not as often), other programs.  After rebooting, it usually runs a checkdisk and reinstates "orphan" files, or repairs corrupt files.In the viewer logs AVG anti-virus keep popping up prior to a shutdown event and I've heard somewhere that it's no longer recommended.  I know that every time I come back from the reboot, AVG needs another complete update.  It's as if information is being wiped out, so that computer can't make the connection and crashes.The User Action says: 1. Compile the definition for the target class into the WMI repository by compiling the class povider mof file.2. Reinstall the program.  Relevant mof files are automatically complied when a program is reinstalled.This is obvious being managed by the Windows Management (Inventory?)Anyhow, I don't know what an mof file is.  If it's AVG that's causing this, or it's a clash with other programs, maybe that's it.  I have some freeware: Spyware Guard, Spybot Search & Destroy, Spyware Blaster, F... Read more

Answer:Shutdown Event

I think your regisrty is locked so AVG can't complete a update. It sounds like it deleted or uninstalled some files and you regisrty is still pointing to them.Spybot Search & Destroy locks the regisrty. You can try to uninstall it and than try to run the update for AVG to see if it takes. If not than uninstall it and do a reinstall.Let us know how you make out.

3 more replies
Relevance 49.61%

.Windows 7 Ultimate
.64 bit
.Original System installed windows 7 home premim
.Came pre installed but upgraded to ultimate
.System hardware age? I bought this new 4 months ago yes reinstalled os from factory defaults using recover OEM windows & then upgraded with anytime upgrade to Ultimate

CPU AMD 1000 mhz X 2
Motherboard?
Power Supply?

Toshiba
Model Number C655D-S5200

Answer:Event ID 41 system shutdown

Hi -

No BSOD dumps are present in the zip file.

When does the system shutdown, e.g., gaming, video, etc...?

Check temps - Speccy - FileHippo.com - Download Free Software

Be sure to keep the laptop elevated for airflow.

Have you contacted Toshiba Support?

Regards. . .

jcgriff2

`

3 more replies
Relevance 49.61%

I boot system. I sign in.....system shuts down all by itself. When I re-boot it tells me it failed to to "Thermal Event" and tells to be F1 to continues.

What is "Thermal Event"?

Answer:Thermal Event Shutdown

Hello,

It basically means that your system overheated and shut itself down so as not to damage any components.
Reasons for this range from dust on the heatsink or a fan not spinning to heatsink not being seated correctly.

What is the make/specifications of the system and roughly how old is it?

3 more replies
Relevance 49.61%

Hello, I have an x61s running Windows Vista business (32 bit).  I'd like to be able to close the lid while the system is shutting down. That is I initiate a shutdown by selecting "shut down" from the Windows Start menu, and then I close the lid of the notebook, without waiting for the sutdown to complete. Problem is that closing the lid makes the notebook go into sleep mode, even if a shutdown has already been initiated. Does anyone know how I can avoid this, so that the system will continue to shut down even though the lid is closed in the process? That would be most useful, because when I decide to shut down my computer, I want to close the lid immediately.  However, if I close the lid during regular operation (not in a shut down scenario), then I don't want the system to shut down; In this case the system going to sleep following the lid close event is fine. I tried setting a "Lid closed action delay" of 2 minutes (in power manager, global power settings, advanced settings for the "lid closed" event), but this does not seem to work, the system still goes to sleep immediately after I close the lid.Message Edited by astra4 on 12-17-2008 08:22 PM

More replies
Relevance 49.61%

Several times over the last few weeks, I noticed that my computer (Dell Optiplex 9020) had rebooted while left on overnight. Then today, without warning, the light blue (not BSOD) WIn 10 Restarting screen appeared while I was doing something noninvasive, like checking email. Then the system rebooted.

The event viewer offered the following clues:

Event ID 109
The kernel power manager has initiated a shutdown transition.
Shutdown Reason: Kernel AP

Event ID 1074
The process C:\WINDOWS\system32\winlogon.exe (MARK-9020) has initiated the restart of computer MARK-9020 on behalf of user NT AUTHORITY\SYSTEM for the following reason: No title for this reason could be found
Reason Code: 0x500ff
Shutdown Type: restart
Comment:
I would be very grateful to hear back from members who have solved this problem.
Thanks!

More replies
Relevance 49.61%

Several times over the last few weeks, I noticed that my computer (Dell Optiplex 9020) had rebooted while left on overnight. Then today, without warning, the light blue (not BSOD) WIn 10 Restarting screen appeared while I was doing something noninvasive, like checking email. Then the system rebooted.

The event viewer offered the following clues:

Event ID 109
The kernel power manager has initiated a shutdown transition.
Shutdown Reason: Kernel AP

Event ID 1074
The process C:\WINDOWS\system32\winlogon.exe (MARK-9020) has initiated the restart of computer MARK-9020 on behalf of user NT AUTHORITY\SYSTEM for the following reason: No title for this reason could be found
Reason Code: 0x500ff
Shutdown Type: restart
Comment:
I would be very grateful to hear back from members who have solved this problem.
Thanks!

More replies
Relevance 49.61%

My 3 week old HP laptop is booting up and shutting down very slowly.Have tried all the usual cleanups and start up program disable stuff but it's as slow as ever. It's got AMD Turion x2 cpu and 2gb Ram surely it shouldn't be this slow?Anybody any idea? Event log keeps coming up with event log 100 on start up and event log 200 on shutdown stating both these processes are taking too long, but how do i fix it???

More replies
Relevance 49.61%

Several times over the last few weeks, I noticed that my computer (Dell Optiplex 9020) had rebooted while left on overnight. Then today, without warning, the light blue (not BSOD) WIn 10 Restarting screen appeared while I was doing something noninvasive, like checking email. Then the system rebooted.

The event viewer offered the following clues:

Event ID 109
The kernel power manager has initiated a shutdown transition.
Shutdown Reason: Kernel AP

Event ID 1074
The process C:\WINDOWS\system32\winlogon.exe (MARK-9020) has initiated the restart of computer MARK-9020 on behalf of user NT AUTHORITY\SYSTEM for the following reason: No title for this reason could be found
Reason Code: 0x500ff
Shutdown Type: restart
Comment:
I would be very grateful to hear back from members who have solved this problem.
Thanks!

More replies
Relevance 49.61%

Reciving
Error
WinVNC4
DeviceFrameBuffer: BitBlt failed:997
Not causing any issues that I am aware of but it is filling up the event logs with about 40-100 of these a day. Only 1 PC has the issue on the network.

Has anyone had an issue like this?
 

More replies
Relevance 49.61%
Question: Event ID Errors.

In Event viewer, ID FT disk error # 45 & 49, this is a weird problem... I have replace the hard drive with another one only to have it do this again. Is there a fix for these problems?upon every startup after pc boots there are these two errors in event viewer ... Any help would be so cool... Thank you..

Answer:Event ID Errors.

post the exact event for reviewAnswers are only as good as the information you provide.How to properly post a question: Sorry no tech support via PM's

7 more replies
Relevance 49.61%
Question: Event id 35 errors

I've had the CPU (Intel Core 2 Quad Q9550) moved from my previous pc to a new, identical machine.

Ever since then, I found the pc in "sleep" mode even though I had disabled it, and I'm getting lots of event id 35 errors. It would seem "energy saving features" for the four processors "are disabled due to a firmware problem".

How can I solve this?

Thanks for the help.

Answer:Event id 35 errors

Do you still need assistance with this issue?

2 more replies
Relevance 49.61%

Hello all,

My laptop works on Windows Vista Business. I use Panda Cloud antivirus and also SuperAntiSpyware and have never detected any problem.
Suddenly I can not connect to internet and even Windows firewall can not be activated. The Chrome browser does not work also. When browsing sometimes I got a page from urlseek.vmn.net. In the Event Log I got the following errors:

- The Base Filtering Engine service terminated with the following error: The system cannot find the file specified. Event ID:7023
- The Windows Firewall service depends on the Base Filtering Engine service which failed to start because of the following error: The system cannot find the file specified. Event ID:7001
- The Network List Service service depends on the Network Location Awareness service which failed to start because of the following error: The depending service or group failed to start. Event ID:7001
- The Network Location Awareness service depends on the TCP/IP Protocol Driver service which failed to start because of the following error: Element not found. Event ID:7001
- The TCP/IP Protocol Driver service failed to start due to the following error: Element not found. Event ID:7000

Many thanks in advance.

Answer:Several Event log errors

Hello again,

It seems that I cann't edit the contentts and the only possibility is to add a new post.
I want to clarify about urlseek.vmn.net because I do not think I expressed myself well. What I mean is that before losing internet connection when I surfed in chrome sometimes I got a page from urlseek.vmn.net. Apart from that I didn't have other important problems apart from beeing a bit slow at boot up.
Also, I found that in Device Manager, if you enable the option to show hidden devices, the section of Non Plug and Play Drivers shows that TCP / IP Protocol Driver and HTTP are not working and have error code 24. I used the option to reinstall TCP / IP using netsh command but does not work.

Thanks in advance.

11 more replies
Relevance 49.61%
Question: Event Log Errors

I think this is in the right place, and I apologize for the long post Im getting the following error messages in Event Viewer, I dont know what they mean or what I should dowhen I start my computer, I get these in System Events:Source: DCOMevent ID: 10005Type: ErrorUser: NT AUTHORITY\SYSTEMDescription:DCOM got error "The service database is locked. " attempting to start the service winmgmt with arguments "" in order to run the server:{8BC3F05E-D86B-11D0-A075-00C04FB68820}Source: DCOMevent ID: 10005Type: ErrorUser: NT AUTHORITY\SYSTEMDescription:DCOM got error "The service database is locked. " attempting to start the service COMSysApp with arguments "" in order to run the server:{ECABAFBC-7F19-11D2-978E-0000F8757E2A}Source: DCOMevent ID: 10005Type: ErrorUser: NT AUTHORITY\SYSTEMDescription:DCOM got error "The service database is locked. " attempting to start the service EventSystem with arguments "" in order to run the server:{1BE1F766-5536-11D1-B726-00C04FB926AF}when I start my computer, I get these in Application Events:Source: COM+event ID: 4689Type: ErrorUser: N/ADescription:The run-time environment has detected an inconsistency in its internal state. This indicates a potential instability in the process that could be caused by the custom components running in the COM+ application, the components they make use of, or other factors. Error in f:\xpsp3\com\com1x\src\comsvcs... Read more

More replies
Relevance 49.61%

After losing 15GB of data that will take an enormous amount of time to regenerate ( I have just completed digitizing about 100 vynil LPs and had only burned a few of them to CD) I would appreciate XP Pro informing me a little more forcefully next time there are controller problems on a HDD rather than rely on me to check the log. On review I might have seen something if I checked every day but I don't, only occasionally. My bad but really if the system can come up with a message like 'the drive is corrupt' you think it could tell me.

Is there any way I can get the event viewer of some other service/app to let me know if the red error level event occur esp if they are genetrated by ntfs or disk. It doesn't seem to be an option anywhere that I can see.
 

Answer:event log-can it pop-up errors

Hello cyril3 Like the Three Stooge's Curly used to say; "Your a victim of circumstance." I don't think there is any way for XP to do what you want in regards to your post.
 

1 more replies
Relevance 49.61%

Hi

A few months back I started to find that my backups using Mirror Folder were not working using the ntfs change journals. Don't know if this is related to problem this morning though.

I have just tried to back up some files/folders with another application, Macrium Reflect which is now throwing me an error about not being able to create a volume snapshot with error code 0x8004230f.

I have checked the event log and found errors with VSS going back to 02/11/2010. Mainly writer errors until this morning.

This morning I got a different error having reformatted the external drive I was backing up too last night. A catastrophic failure error. See attached vss.txt from windows event log.

I have run 'vssadmin list writers' from command prompt which shows no errors.

I have run chkdsk /f on the reformatted drive which shows ok.

Am continuing to investigate but can anyone give me any ideas as to what I should try first?

Answer:VSS event log errors

Is this the problem?






Quote:
Originally posted at http://forums.truecrypt.org/viewtopic.php?p=91972#91972...

"The Windows Volume Shadow Copy Service is currently supported only for partitions within the key scope of system encryption (for example, a system partition encrypted by TrueCrypt or a non-system partition located on a system drive encrypted by TrueCrypt). Note: For other types of volumes, the Volume Shadow Copy Service is not supported because the documentation for the necessary API is not available."


...more specifically:






Quote:
Originally posted by windows - Volume Shadow Copy based backup that works with TrueCrypt? - Super User...

"... because the documentation for the necessary API is available from Microsoft only under a non-disclosure agreement (which is impossible to comply with because TrueCrypt is open source)."


Looks like it's just not possible. Currently investigating how Mirror Folder handles external encrypted (non-system) drives with regard to VSS.

1 more replies
Relevance 49.61%
Question: event log errors

Hello All,
 
My computer is receiving multiple errors in event viewer can anyone help me out at all?
 
MiniToolBox by Farbar  Version: 13-07-2013
Ran by User (administrator) on 11-08-2013 at 10:58:41
Running from "C:\Users\User\Downloads"
Microsoft Windows 7 Home Premium  Service Pack 1 (X86)
Boot Mode: Normal
***************************************************************************
 
========================= Event log errors: ===============================
 
Application errors:
==================
Error: (08/11/2013 10:12:13 AM) (Source: Windows Search Service) (User: )
Description: The index cannot be initialized.
 
 
Details:
The registry value cannot be read because the configuration is invalid. Recreate the content index configuration by removing the content index.  (HRESULT : 0x80040d03) (0x80040d03)
 
Error: (08/11/2013 10:12:13 AM) (Source: Windows Search Service) (User: )
Description: The application cannot be initialized.
 
Context: Windows Application
 
 
Details:
The registry value cannot be read because the configuration is invalid. Recreate the content index configuration by removing the content index.  (HRESULT : 0x80040d03) (0x80040d03)
 
Error: (08/11/2013 10:12:13 AM) (Source: Windows Search Service) (User: )
Description: The gatherer object cannot be initialized.
 
Context: Windows Application, SystemIndex Catalog
 
 
Details:
The registry value cannot be read becau... Read more

Answer:event log errors

Majority of errors relate to Search Index, seems to be damaged/corrupt.
 
You can try to Rebuild Search Index.
 
Louis

1 more replies
Relevance 49.61%
Question: Event errors

I seem to be getting them all over again only this time there is no DHCP errors. This time it's event errors 4202 and 4203. The computer just reboots, no blue screen even though I have the setup to show a blue screen. Using a static address on a wireless desktop with a linksys wusb54gs adapter to a netgear wireless wgt624 router. Anyone, please help. Thanks. Strange, it's been running just fine for the last 2+ weeks until today.
 

Answer:Event errors

"The computer just reboots ..."

Because of experience with one of my PCs and with a neighbor's my first suspicion is that the power supply is failing (or something in the power circuit). If it is the power supply it may get better for a while but sooner or later it will bet worse. And sooner or later you will get registry and disk corruption. So keep your backups current.

Two other possibilities, easier to check, are overheating and a memory error. A good memory checker is this one: http://www.memtest.org/
 

1 more replies
Relevance 49.61%

Hi there and thanks in advance for any help I may receive. I have been getting constant errors in my event viewer, which I look at after my computer does any or all of the following: Freezes at random, loses internet and sometimes BSOD, (although I have not received a BSOD since reinstalling my OS a few weeks ago). Here is some basic info on my computer and I apologize in advance if I do not give the proper info beforehand. I thought I would wait and give the needed info when asked to do so. Also, I tried to run Root Repeal but got an error message saying it does not support 64 bit OS. Here are a few examples of errors I get but there are many more. The Windows component could not be configured because of an error: 1168 "Element not found." (Command line: ""C:\Windows\System32\ocsetup.exe" MicrosoftWindowsPowerShell /norestart /quiet")Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.The device, \Device\Ide\iaStor0, did not respond within the timeout period.The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.The device, \Device\... Read more

Answer:Many errors in event log

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explanation about the tool. No input is needed, the scan is running.Notepad will open with the results.Follo... Read more

2 more replies
Relevance 49.61%
Question: Event ID Errors

I finally cleaned up my event log and only have 2 errors left. They show up in the event log after reboot. They are as follows. 1.) Event ID: 7026 The following boot-start or system-start driver(s) failed to load: Beep Source: Service Control Manager Eventlog Provider 2.) Event ID: 46 Crash dump initialization failed! Source: volmgr Event 1Research shows that in the system\adv settings\startup and recovery\settings\system failure I should check the "write an event to system log" but the box DOES NOT stay checked. Event 2Haven't found much on this event. My beep.sys file is missing from the C:\windows\system32 directory. Any ideas and assistance would be appreciated. Thank you in advance Ward HP Pavilion dv7-1245dx Notebook PC (x64-based PC)MS Windows Vista? Home Premium 6.0.6002 SP2 Build 6002AMD Turion™ X2 Dual-Core Mobile RM-72, 2100 Mhz, 2 Core(s), 2 Logical Processor(s)

Answer:Event ID Errors

There is a workaround at Microsoft Support which also has an automated "Fix It" which may resolve your problem with the Event ID: 7026. You can read about it here.There is a similar workaround for the Event ID: 46, you can read it here.

3 more replies
Relevance 49.61%
Question: event log errors

i have been having errors from warning to critical about booting and shutting down performance event ID 100 and 200. ive seen all over the internet that people are having the same trouble as me. could anyone help me with this. microsoft hasnt put any information out and critical doesnt sit too well with me. HELP!!!!
thanx

More replies
Relevance 49.61%
Question: Event Log Errors

I am trying to help my mom out. But not having much luck. I don't know anything about Vista. So I'm struggling with that too. So if someone could help me out I'd really appreciate it. She has a bunch of errors in the event log. I'm starting with the ones that happen the most.

5 kernel-general
6 ACPI
6 Kernel Whea
10 Kernel whea
1000 Application error
1002 Application hang

could you tell me what I need to do to correct these?

Answer:Event Log Errors

It is sort of difficult without a few more specifics. Is the computer suffering from some specific problem? You can look up the error cods yourself on Microsoft's site, but they are pretty generic.

13 more replies
Relevance 49.61%
Question: Event Log Errors

I discovered several repeating event log errors today when I decided I wanted to speed up my boot time. I've attempted to fix the errors but have been unsuccessful thus far.
Problem: My startup time should be quite a bit faster then what it is.
I have adjusted my services to the "safe" specs from Black Viper's website. I only have 5 startup programs and they are the following:

ESET Smart Security (I have disabled the startup scan)
Cobian Backup (small backup program that has a small service running in the background so it knows when to start my scheduled backup; this program loads instantly)
Launchy (I only have 1 shortcut on my desktop and 4 in my taskbar. This program replaces all of the shortcuts.)
AHK Script (custom made script that is extremely small)

I have attempted to disable every automatic update program on my computer.
I thought I had disabled adobe flash player from auto updating itself but I got a message this morning notifying me of an update.
I've looked through the services and startup and I can't seem to find the right program to disable.
Where can I locate this program?
Here are the two errors that I'm getting:
1.
Event ID: 315, PrintService
Error: 2114

"The print spooler failed to share printer Brother MFC-255CW Printer with shared resource name Brother MFC-255CW Printer. Error 2114. The printer cannot be used by others on the network."

Additional info: The printer works just fine from any computer on my network.
... Read more

Answer:Event Log Errors

Run Windows System Restore - chose a restore point prior to ... the altering of system services & start-up entries -
START | type rstrui

I would leave the entries alone.

What is your boot-up time normally?

2 more replies
Relevance 49.61%
Question: Event errors?

Hello, I was wondering if anyone could help me with these errors? Thanks for any suggestions.Attachment 13376

Answer:Event errors?

These errors from Diagnostic - Performance\Operational includes information about trouble start & shutdown system

Event ID 100 - measure start time
event status:
If start time is less than 60s - event is not reported
if start time is between 60-90s- event is reported as warning
if start time is between 90 -120s - event is reported as error
if start time is longer than 120s - event is reported as crititical
Event ID 101-199 - reports what cause start delay
Event ID 200 - mesure shutdown time
Event ID 201-299 - reports shutdown trouble
It could be possible events id 3xx and 4xx I don't know exactly their meaning although it also some common start & shutdown time

Click on every events and all tabs in every reports if you know more details

see below how it looks by me - it is old event because from long time I don't have event ID 100 - my system start time is less than 60s

4 more replies
Relevance 49.61%

I've had my computer for a few short days, and was very surprised to see the hundreds of errors and warnings in the Event Viewer.
The one that is repeating itself today is error 10016. I've read the information that I've found on MS site, but I have no idea what they're talking about. If someone can help, I'd appreciate it. Here's the event message.
Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 2/4/2011 2:34:30 PM
Event ID: 10016
Task Category: None
Level: Error
Keywords: Classic
User: dell8300\carol
Computer: dell8300
Description:
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D3DCB472-7261-43CE-924B-0704BD730D5F}
and APPID
{D3DCB472-7261-43CE-924B-0704BD730D5F}
to the user dell8300\carol SID (S-1-5-21-1020673176-1216191353-2236307078-1001) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="49152">10016</EventID>
<Version>0</Version>
<Level>2</Level>
<Tas... Read more

Answer:Many errors in Event log

Don't worry about it and if you aren't having any problems, stay out of the event viewer

1 more replies
Relevance 49.61%
Question: Event errors

It takes about 5 to 10 minutes to open anything on my pc. I finally accessed the event viewer and have the following errors:

disk
service control manager 7023

What can I do?

Also I have forgotten my system admin password, is there any way around this?
 

More replies
Relevance 49.2%

I tend to run my computer 24/7, but within the last 3 days, I had my computer shutdown while I was away with an Event ID 109 with the following reason:






The kernel power manager has initiated a shutdown transition.

Shutdown Reason: Battery



Thing is, I am on a desktop computer, not a laptop with a UPS connected. And it is an APC UPS with Powerchute Personal Edition installed. Although this is a Windows 7 to Windows 10 upgrade with Powerchute Personal Already installed. Does anyone know of a reason why Kernel-Power is shutting my computer down for this battery reason?

Answer:Windows 10 Pro Desktop Shutdown with Event ID 109

Hi:

Until someone more expert arrives...

What does the PCPE dashboard tell you?
Are you hearing any beeps from the APC UPS?
How old is the APC UPS?
Are you sure everything is plugged in and working properly, including the data cable from the back of the PC tower to the UPS?

Reason for asking: I had a relatively new APC UPS fail after only a few months several months ago.
It was under warranty and, after calling Schneider Electric, they RMA'd the whole unit (not just the battery), no questions asked. They sent a brand new one in 2 days.
(After many years of using their products, this was a "first". But I was pleased to find that they took care of it with zero fuss. The only chore was having to haul the old unit to the UPS store for the return shipment.)
Just a thought.

MM

7 more replies
Relevance 49.2%

Got these on my shutdown last night, I don't think I have got them before. What are they exactly?

The NgcCtnrSvc service was unable to log on as NT AUTHORITY\LocalService with the currently configured password due to the following error: The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.To ensure that the service is configured properly, use the Services snap-in in Microsoft Management Console (MMC).
The Microsoft Passport Container service failed to start due to the following error: The service did not start due to a logon failure.

More replies
Relevance 49.2%

I am running Windows XP-Home. All of a sudden when I want to shut down my computer I get a box that comes up and it's for "shutdown event tracker". I never had that before and I would like to just be able to select either shutdown/restart/etc. not having to put in why I am shutting down.

What I read is that this was originally for Windows 2000 but in Windows XP this was shut-off. If that is so - why do I get that pop-up?

In the help area this is what I found:
"On Windows 2000 Server products, you will be prompted to supply information regarding why you are shutting down or restarting the computer. This feature is turned off in Windows XP."

How can I get this turned OFF?
 

Answer:Shutdown Event Tracker Question

How to enable and disable Shutdown Event Tracker
1.To open Registry Editor, click Start, click Run, type regedit, and then click OK.

2.In Registry Editor, navigate to the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Reliability

3.Name:ShutdownReasonUI
Type:REG_DWORD
Value:1=enable;0=disable
 

3 more replies
Relevance 49.2%

I have been encountering slow shutdown times on my desktop recently. I looked in the event logs to try and find some clue but they were not that helpful to the less than technically minded

1: EVENT_TCPIP_TCP_CONNECT_LIMIT_REACHED
I had a lot of the above that were listed both as information and warning

2: also W32time came up several time as both info and warning

3: NetBT came up several times - with
"the name MSHOME could not be registered on the interface with IP address xxx, the machine with the ip address yyy did not allow the name to be claimed by this machine.

The only hardware I have installed recently is a Belkin wireless card (whose problems I have posted elsewhere ) This may have something to do with it but I am not sure. Briefly my setup is a wireless laptop (no problems) and a wired desktop (which has been re-configured to run on wireless)

I am running Windows XP pro with SP2 on an AMD system with 2 gigs ram

I have run several virus checks and I run spybot regularly, I have a belkin router to connect through to my blueyonder broadband.

Any advice?
 

Answer:XP very slow shutdown - event logs

13 more replies
Relevance 49.2%

My currently up to date windows 10 pro machine has been restarting very very frequently after I've left it for a goodly while, including nearly every night, and in trying to figger out why this is happening, I learned about this option, Display Shutdown Event Tracker. It's supposed to be in the Local Group Policy editor, but I do NOT see an option named that. I'm an admin on my machine, so I'm not sure why I can't see it, unless it's not there any longer? Moved? Who knows? I did locate the .msc for GP, and ran it explicitly as an admin, but nada. Someone had mentioned looking at the user32 events in the regular event viewer, but this is all I see there:

"The process C:\Windows\System32\RuntimeBroker.exe (LAPTOPNAME) has initiated the restart of computer LAPTOPNAME on behalf of user LAPTOPNAME\MyUserName for the following reason: Other (Unplanned) Reason Code: 0x0 Shutdown Type: restart Comment:"

Any thoughts anyone?

TIA
elaine

More replies
Relevance 49.2%

Hi there,

I have had this PC for about three months and this is something that happens about 3 times a week. I'll come into the room and try to get it out of sleep mode, and then realize it has shut down yet again. When I check the details, here's what I get. I'm not a computer technician but it would be great if someone could take a look at this and see if they can determine the cause.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8006E47060
BCP3: FFFFF80000B9C518
BCP4: FFFFFA8004DF4C10
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\040110-43680-01.dmp
C:\Users\Miseta\AppData\Local\Temp\WER-72649-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Answer:BlueScreen event and random shutdown

Hello Welcome to SF,

Please post us the Dump file http://www.sevenforums.com/crash-loc...d-problem.html

Good Luck,
Captain

5 more replies
Relevance 49.2%

I plug in a flashdrive, scan it, copy a few files, pull it out (it had 3 files on it, never have viruses. Never.). Windows suddenly decides to shutdown. Waited :30 sec, rebooted, logged in and went to Event Viewer>System and filter for 6008 events. Zero, no listings. Can't find anything in the past 20 minutes that looks like a shutdown.

What gives? How can Event Viewer not show the shutdown? How can I find out what the burp was? I've had no issues lately (since a new card in July), Windows has been flawless. I hate it when Windows does something like this and I can't track it down.
Thanks in advance for any interest,

Surviver

More replies
Relevance 49.2%

Hey,

I recently had a random shutdown while using Google Chrome.

All I have is the minidump but no way to read it.

There seems to be no record of the crash in my event viewer.

I checked my ram, PS, HD and Gfx card and they all seem to be in working order.

This is a brand new rig that I built so I am thinking it's software related but I want to make sure.

What should my next step be?

Answer:Single Random Shutdown - No Event

Download BlueScreenView (in Zip file)No installation required.Unzip downloaded file and double click on BlueScreenView.exe file to run the program.When scanning is done, go Edit>Select All.Go File>Save Selected Items, and save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content, and paste it into your next reply.

34 more replies
Relevance 49.2%

Hello. First of all, I didn't know where to post this so I chose Win7 because it's what I use.

OK so this problem started about a month ago, but now it's becoming more frequent than ever. What happens is, as I'm chilling on my desktop PC, it just shuts down spontaneously, and here's the thing, since I don't have a restart button, I can't restart it, the monitor goes black (no BSOD) and even if I hold the power button too long, it won't shutdown. The only way to shut it down is to remove the power supply cord (which of course could lead to corrupted hardware, data loss, etc).

Now this mostly happens when I play games with high demanding hardware. So for this reason, I'm monitoring the CPU heat and it seems fine. Max temp goes to about 51C. OK I am now gonna post dxdiag info so you can examine all my PC specs, if you need anything else, just say so.

Thank you very much in advance!


Code:
------------------
System Information
------------------
Time of this report: 1/7/2011, 03:11:27
Machine name: TONI7
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: Packard Bell
System Model: ixtreme M5120
BIOS: Default System BIOS
Processor: AMD Phenom(tm) 9650 Quad-Core Processor (4 CPUs), ~2.3GHz
Memory: 8192MB RAM
Available OS Memory: 8192MB RAM
Page File: 1661MB used, 14719MB ava... Read more

Answer:Event ID 41 Error - Spontaneous Shutdown

Update Realtek HD audio drivers - http://sysnative.com/0x1/DriverRefer...l#RTKVHD64.sys

See if update available for NVIDIA GeForce GT 230 drivers - http://www.nvidia.com/Download/index.aspx?lang=en-us

" " Marvell Yukon 88E8071 PCI-E Gigabit Ethernet Controller - http://www.marvell.com/support.html

Try these 3 places for additional information -

1. WERCON -
START | type view | "View all Problem Reports" | 2x-click on line item for additional crash info

2. Reliability Monitor -
START | type perfmon /rel

3. Event Viewer -
START | type eventvwr.msc | Custom Views | Administrative Events

Regards. . .

jcgriff2

`

13 more replies
Relevance 49.2%
Question: Misc Event Errors

Iwas having random shutdown problems till I bought a new power supply but stillthings are OK

Here are some errors from the event log, are they related or my components craping out on me?

Thanks

Event Type: Warning
Event Source: Dhcp
Event Category: None
Event ID: 1003
Date: 9/17/2003
Time: 8:17:57 PM
User: N/A
Computer: 2-XK7RZTTBQ7WKU
Description:
Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 0050F27436DA. The following error occurred:
The semaphore timeout period has expired. . Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00000079

Event Type: Error
Event Source: DCOM
Event Category: None
Event ID: 10010
Date: 9/17/2003
Time: 6:10:39 PM
User: 2-XK7RZTTBQ7WKU\Tracy
Computer: 2-XK7RZTTBQ7WKU
Description:
The server {FB7199AB-79BF-11D2-8D94-0000F875C541} did not register with DCOM within the required timeout.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Event Type: Error
Event Source: Cdrom
Event Category: None
Event ID: 7
Date: 9/17/2003
Time: 8:44:43 PM
User: N/A
Computer: 2-XK7RZTTBQ7WKU
Description:
The device, \Device\CdRom0, has a bad block.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 0068010e 00b... Read more

Answer:Misc Event Errors

6 more replies
Relevance 49.2%

Hi everyone,Browsing through the forums as one does, came across a couple of posts where you requested DDS logs. Wanted to find out what these were so ran it (and now l know for future reference!).At the end of one of the logs, event viewer messages, it showed up a few errors. I cannot recall having any problems over the past week, so is there anything to worry about? ==== Event Viewer Messages From Past Week ========16/05/2009 01:51:26, error: Cdrom [11]  - The driver detected a controller error on \Device\CdRom1.15/05/2009 17:37:29, error: Service Control Manager [7023]  - The Application Management service terminated with the following error:  The specified module could not be found.14/05/2009 08:48:07, error: ipnathlp [31012]  - The DNS proxy agent encountered an error while obtaining the local list of name-resolution servers. Some DNS or WINS servers may be inaccessible to clients on the local network. The data is the error code.14/05/2009 07:43:57, error: DCOM [10005]  - DCOM got error "%1058" attempting to start the service upnphost with arguments "" in order to run the server: {204810B9-73B2-11D4-BF42-00B0D0118B56}14/05/2009 07:43:51, error: Service Control Manager [7000]  - The General Purpose USB Driver (adildr.sys) service failed to start due to the following error:  The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.Thanks

Answer:DDS Event Viewer Errors

If you keep reading WebMD daily, I'm pretty sure, after a few days, you'll realize, that you have at least few illnesses, and in reality, you're healthy like a horse.Clue: don't use WebMD Same with the computer....if it's not broken....

4 more replies
Relevance 49.2%

Hi, I was wondering if anyone has any knowledge as to the errors i have been recieving in my event viewer under system. The first one that i guess is making me wonder, is a "W32Time" error. This particular error used to some up all the time but as of late was not. However the last week it's made a comeback of sorts. The second error seems to litter my Log over the course of a day it's the "service control manager". I'm not sure if any of these errors are serious, i did some research on the W32Time error, and the most i can tell is it's serious only if it persists. I don't know if you could call it persistant at this point. Any help you guys could offer or explanations would be a big help and greatly appreciated. Thanks.
 

Answer:Errors in event viewer

What are the exact error messages?
 

3 more replies
Relevance 49.2%

Hi folks,

Been with Win 8 for just over a day now, after severe grief with two installs going bad. (Upgrade doesn't work at all, 2nd I should have run Windows update before installing newer nvidia drivers).... I am left with an OS in reasonable working order.

But look at this...

taskhostex (1768) An attempt to open the file "C:\Users\Damien\AppData\Local\Microsoft\Windows\W ebCache\WebCacheV01.dat" for read only access failed with system error 32 (0x00000020): "The process cannot access the file because it is being used by another process. ". The open file operation will fail with error -1032 (0xfffffbf8).

Or how about some of this....

Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-2217591357-3541557252-3149719819-1001:
Process 628 (\Device\HarddiskVolume1\Windows\System32\svchost. exe) has opened key \REGISTRY\USER\S-1-5-21-2217591357-3541557252-3149719819-1001\Software\Microsoft\Windows\CurrentVersion\Uni nstall

And alarmingly this huge list.

Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

DETAIL -
50 user registry handles leaked from \Registry\Us... Read more

Answer:Huge Event Log errors - Help

Ok, i'm back on Windows 7.

Run windows update, over 100+ of them, SP1 etc reinstalled my usual apps, games and now have the grand sum of six entries involving mainly non issues relating to installs.

So what gives?

Why is Windows 8 kicking out all of these?

1 more replies
Relevance 49.2%

I keep having the following event log errors:

The Portable Media Serial Number Service service failed to start due to the following error:
The executable program that this service is configured to run in does not implement the service.

The Portable Media Serial Number Service service failed to start due to the following error:
The executable program that this service is configured to run in does not implement the service.

The Message Queuing Triggers service depends on the Message Queuing service which failed to start because of the following error:
The dependency service does not exist or has been marked for deletion.

The Message Queuing service depends on the following nonexistent service: LanmanServer

The LoadUserProfile call failed with the following error:
Incorrect function.

The Computer Browser service depends on the following nonexistent service: LanmanServer

The LoadUserProfile call failed with the following error:
Incorrect function.

The following boot-start or system-start driver(s) failed to load:
SASKUTIL

Running Windows XP SP3
 

More replies
Relevance 49.2%
Question: Event View Errors

In my log i am getting the following Error message which seems consistant.I have checked the Event Log Online Help but there doesn't appear to be a resolve.Has any one else experienced this error and got a fix?.Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards. DETAIL - 1 user registry handles leaked from \Registry\User\S-1-5-21-2997175511-2732166837-1149651962-1001:Many thanks again for the helpPC SpecAMD Phenom 955 Black Edition4 x 2GB 800mhz ddr2 RamAsus 790GX Mobo1TB HDDRadeon HD4809 GFXAVG Anti-VirusLogitech Wireless Keyboard / Mouse

Answer:Event View Errors

I always get a similar message when the computer starts. Had it for months. I just ignore it along with many of the other things that appear in the event viewer. My computer works fine without any problems.

2 more replies
Relevance 49.2%

I was surprised to see all these errors and need some assistance:

Error 3/28/2010 6:37:52 AM bowser 8003 None
Error 3/27/2010 3:17:49 PM DistributedCOM 10016 None
Error 3/27/2010 11:44:12 AM DistributedCOM 10016 None
Error 3/27/2010 11:43:11 AM PrintService 315 Sharing a printer
Error 3/25/2010 6:40:06 PM DistributedCOM 10016 None
Error 3/21/2010 1:14:40 PM Application Error 1000 (100)
Error 3/21/2010 1:14:37 PM Application Error 1000 (100)
Error 3/21/2010 1:10:54 PM Application Error 1000 (100)
Error 3/21/2010 1:10:50 PM Application Error 1000 (100)
Error 3/20/2010 7:43:16 AM VSS 8194 None
Error 3/19/2010 5:46:55 PM DistributedCOM 10016 None
Error 3/19/2010 5:45:58 PM PrintService 315 Sharing a printer
Error 3/17/2010 7:16:38 PM DistributedCOM 10016 None
Error 3/16/2010 7:36:43 PM DistributedCOM 10016 None
Warning 3/16/2010 7:35:01 PM User Profile Service 1530 None
Error 3/16/2010 6:46:32 PM Service Control Manager 7000 None
Error 3/16/2010 6:46:32 PM Service Control Manager 7011 None
Error 3/16/2010 6:45:45 PM DistributedCOM ... Read more

Answer:Errors in Event Viewer

Welcome,

I would like to say everyone, but I will limit it to me and many others would have a similar report it we went back to last month as you did. The event viewer should be used if you notice a problem with your computer. It can be used to help determine the cause. You had several warnings, a few days ago that did not lead to anything seriious, I would let it go.

Run a sfc /scannow to look for corruption. Go to search, type cmd, do not hit enter. Right click run as administrator. In the cmd prompt type sfc /scannow. If you have problems report back with the log.

5 more replies
Relevance 49.2%

My os is win 7 ultimate ran on an Acer Aspire laptop. The machine failed to start several times, it needs constant refreshing (F-5), and at times when looking at photos the machine will jump and load all the photos and rapidly display them on the screen flicking wildly from on to the other.
I went into safe mode and viewed the Event Viewer and found 453 various errors. Here are just a few of them:

error with dllhost.exe
error with service control manager
Dcom got error 1084 attempting to start service WSearch with arguments error 1068.
The dependency group failed to start.
Boot start failed to load.
Redirected buffering sub system failed to start, a device attached to the system is not functioning.

The above is just a sample of the 453 errors I found.

Any ideas? Thanks a lot.

Answer:Event viewer errors

Hello,

You might try a repair install first thing: Repair Install - Windows 7 Forums

10 more replies
Relevance 49.2%

Could someone please help resolve critical and errors in event viewer.  Something is locking up my laptop for minuets when it comes out of sleep mode.  This is has a 2.6ghtz CPU with an SSD.  It should boot up quickly.  Running Win7 32bit.
 
I have run MiniToolBox to come up with some clues.
 
MiniToolBox by Farbar  Version: 11-05-2015 01
Ran by Gary (administrator) on 07-06-2015 at 22:34:03
Running from "C:\Dnload\SpywareRemovers"
Microsoft Windows 7 Ultimate  Service Pack 1 (X86)
Model: 20E2CTO1WW Manufacturer: LENOVO
Boot Mode: Normal
***************************************************************************
========================= Event log errors: ===============================
Application errors:
==================
Error: (06/07/2015 09:26:57 PM) (Source: IntelDalJhi) (User: )
Description: Intel® Dynamic Application Loader Host Interface Service has failed to write to registry.
Error: (06/07/2015 09:01:13 PM) (Source: IntelDalJhi) (User: )
Description: Intel® Dynamic Application Loader Host Interface Service has failed to write to registry.
Error: (06/07/2015 08:10:28 PM) (Source: IntelDalJhi) (User: )
Description: Intel® Dynamic Application Loader Host Interface Service has failed to write to registry.
Error: (06/07/2015 07:02:21 PM) (Source: IntelDalJhi) (User: )
Description: Intel® Dynamic Application Loader Host Interface Service has failed to write to registry.
Error: (06/07/2015 05:16:34 PM) (Source: Inte... Read more

Answer:Event critical errors

Let's start with the Intel stuff that's in the Application log file.
The Intel® Dynamic Application Loader Host Interface Service most likely belongs to the Intel Management Engine software on your system.
Please download a fresh copy from the system manufacturer's website, then uninstall the current copy and install the freshly downloaded copy.
 
If that doesn't fix it, then please provide these 2 sets of reports:
 
1)  Please do the following:
- open Event Viewer (run eventvwr.msc from the "Run" dialog)
- expand the Custom Views category (left click on the > next to the words "Custom Views")
- right click on Administrative Events
- select "Save all Events in Custom View as..."
- save the file as Admin.evtx
- zip up the file (right click on it, select "Send to", select "Compressed (zipped) folder")
- upload it with your next post (if it's too big, then upload it to a free file-hosting service and post a link here).
 
2)  Even though you're not reporting BSOD's, please provide this information so we can provide a complete analysis:  http://www.bleepingcomputer.com/forums/t/576314/blue-screen-of-death-bsod-posting-instructions-windows-10-81-8-7-vista/
 

13 more replies
Relevance 49.2%

Hello. I am having some isues in Event Viewer. When I look under "System" in Event Viewer, I see a number of warning and error messages. For example, here are a few of the warning messages:

"The time service has not been able to synchronize the time system for 49152 seconds because none of the time providers has been able to provide a usable time stamp. The system clock is unsynchronized. " The source for this one is W32Time. Event ID 36.

"Your computer has automatically configured the IP address for the network card with network address xxxxxxxxx. The IP address being used is xxxxxx." The source for this one is Dhcp. Event ID is 1007.

"Timed out sending notification of device interface change to window of "Connections Tray." The source for this one is PlugPlayManager. Event ID 256.
There a few of each of those warnings. Here is an error message.

"Unable to connect: Windows is unable to connect to the Windows update service and therefore cannot download and install updates according to the set schedule. Windows will continue to try to establish a connection." The source for this one is Windows Update Agent. Event ID 16.
Those are all of the warning and error messages that appear in my system file in event viewer. Any idea of what is going on with them?

My OS is Windows XP, the computer is a HP laptop with 1.1 GHZ AMD Duron processor.

Answer:Errors in Event Viewer

Please supply the Event Source & Event ID #.
They don't look like anything serious but will need the Source & ID # to look them up.

26 more replies
Relevance 49.2%

I'm using 2K pro. I've been getting alot of error messages the program is not responding or has found a problem must end program. I checked the event viewer and this is what I found. Starting from 8/24/04 to 8/30/04. In the application log errors event ID 1000 28 errors, event ID 1001 25 errors. In system log I found : (2 )IPSEC PolicyAgent Service Ipsec Driver Failed to Start errors, (2 )IPSEC PolicyAgent Service Couldn't be Started Oaklry Failed to Start,(10), DHCP Your computer has lost the lease to it's IP address on the network card, and (2) The server could not bind to the transport/Device/net Bt_t cpip_. errors. I have run virus scan, Ad Aware and CCleaner. No viruses found. There has to be something wrong if you can please help. Thanks Kev.Disregard this message the problem was fixed in my earlier thead. Thank you.
 

More replies
Relevance 49.2%

I'm using 2K pro. I've been getting alot of error messages the program is not responding or has found a problem must end program. I checked the event viewer and this is what I found. Starting from 8/24/04 to 8/30/04. In the application log errors event ID 1000 28 errors, event ID 1001 25 errors. In system log I found : (2 )IPSEC PolicyAgent Service Ipsec Driver Failed to Start errors, (2 )IPSEC PolicyAgent Service Couldn't be Started Oaklry Failed to Start,(10), DHCP Your computer has lost the lease to it's IP address on the network card, and (2) The server could not bind to the transport/Device/net Bt_t cpip_. errors. I have run virus scan, Ad Aware and CCleaner. No viruses found. There has to be something wrong if you can please help. Thanks Kev.Disregard this message the problem was fixed in my earlier thead. Thank you.
 

More replies
Relevance 49.2%

I started getting this error (event id :4321) after upgrading XP to sp3.

The name "FRIEDMAN :1d" could not be registered on the Interface with IP address 192.168.0.4. The machine with the IP address 192.168.0.6 did not allow the name to be claimed by this machine.

FRIEDMAN is the workgroup, not the machine name.

192.168.0.4 is my machine, running xp pro. 192.168.0.6 is my wife's machine running xp home. Both 'puters were upgraded to sp3 and the log errors started. I see no problems other than the log.

The subnet for both machines is 255.255.255.0

I am not running WINS. This is a small home network with a router.

Any suggestions? Thanks

Eric
 

Answer:NetBT errors in event log

9 more replies
Relevance 49.2%

I have noticed that in the event viewer that there is a red X and says event system error 50 ID#4609 and under the system control manager there are 4 red X's and they are scm PfMot.nt failed event 7000 and the other 3 are DCOM service data base locked ID#1005. What are these errors and how do I fix them. When I click on them microsoft downloads what it is but not specific enough for me to understand. Sometimes from a cold boot it will hang at finding the hard drives. So after a restart it usually fires up. I have checked the memory with memtest and passed with no errors. The parts are all new. Can some one explain what there errors are and should I be concerned about them..Thanks for any info.
 

Answer:Event viewer errors

Not sure if this will give you any more information, but go HERE and type in the source and the ID for each event.

Every XP system I have ever seen or worked on has always had a couple of errors, including mine.

I think you will probably find that your "hanging" problem may be unrelated.

If it hangs during Safe Mode startup, then it's more than likely a piece of hardware that XP doesn't like.

If it doesn't hang during Safe Mode, then the culprit is more than likely a driver issue or a startup program/s that's the culprit.

The above is not a rule set in stone, but it's an easy and quick thing to check and may give you an idea.

Also, make sure you are using the latest compatible drivers, remove any hardware you don't use, check Device Manager for any errors and have the minimum programs enabled during startup.
 

2 more replies
Relevance 49.2%

I have two event errors. They are both in the application part.

The first is Perfnet:- Unable to open the Server service. Server performance data will not be returned. Error code returned is in data DWORD 0.

The second is:- Perfctrs:- Unable to read IO control information from NBT device. Are these errors terminal or can they be solved. They are the only two I have and they are there everytime I reboot.

Thanx in advance
 

Answer:Event viewer Errors

is this nt 4.0 or windows 2000, server or workstation?

some performance counters require you to have snmp loaded and configured to get the requested results.

 

2 more replies
Relevance 49.2%

I see this in the Event Viewer in "Aplication"

Windows saved user MCD4X4\Brian registry while an application or service was still using the registry during log off. The memory used by the user's registry has not been freed. The registry will be unloaded when it is no longer in use.

This is often caused by services running as a user account, try configuring the services to run in either the LocalService or NetworkService account.

And these two in "System":

The Matrox WDM capture/crossbar driver service failed to start due to the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

Timeout (30000 milliseconds) waiting for a transaction response from the MGABGEXE service.

I'd like to fix them because I can't use any capture software, probubly related??
 

Answer:Event Viewer Errors:

Did you chk your drivers.My computer then right click and go to properties, click on the hardware tab, then click on the device manager button, check to see if you have any yellow exclamation marks next to any hardware if you do, then it means the drivers weren't installed or they need to be updated
Click on Start, Run and type "Services.msc" It'll bring up all registered services on your system. Try looking for Matrox WDM capture/crossbar driver service and see if it's started, stopped or disabled. If it's not started, then start it. If it's disabled, then enable and start it. Try capturing after that.
 

2 more replies
Relevance 49.2%

Hi there,

I may just be a little paranoid after dealing with what I can only describe as a hybrid of ProRat with any other combination of symptoms from RootKits and other various malware, but I wanted to make sure that I am not still infected because I'm seeing all sorts of errors in my event logs (mostly to do with licenses and version mismatches, etc.) and RootKitRevealer crashes every time I try to use it. Since it looked like the rootkit was in the MBR of a SSD, meaning that I couldn't write zeroes, I replaced the SSD and even flashed the BIOS (it was ready for an upgrade anyway). Now as I'm working on a fresh Windows 7 install, I'm seeing the Event Log errors popping up more than I would think they should be.... Can you help me confirm that my machine is safe?

I've attached a copy of the error listings so you can get an idea of what I've seen today, starting immediately after I started to install on the fresh SSD.

Thanks so much!
Level Date and Time Source Event ID Task Category
Error 10/5/2012 6:53:33 PM Application Error 1000 (100) "Faulting application name: RootkitRevealer.exe, version: 1.71.0.0, time stamp: 0x44e255aa
Faulting module name: RootkitRevealer.exe, version: 1.71.0.0, time stamp: 0x44e255aa
Exception code: 0xc0000005
Fault offset: 0x000040cd
Faulting process id: 0xce8
Faulting application start time: 0x01cda34c3f5234b2
Faulting application path: C:\Users\Setup\Downloads\RootkitRevealer.exe
Faulting m... Read more

Answer:Numerous Event Log Errors

I would suspect file damage from malware remoaval. Appears it may be a driver,What is the operating system?Can you run these 2 malware scans?Please download TDSSKiller.zip and and extract it.Run TDSSKiller.exe. Click on Change Parameters Put a check in the box of Detect TDLFS file system Click Start scan.When it is finished the utility outputs a list of detected objects with description.
The utility automatically selects an action (Cure or Delete) for malicious objects.
The utility prompts the user to select an action to apply to suspicious objects (Skip, by default). Let the options as it is and click ContinueLet reboot if needed and tell me if the tool needed a reboot.Click on Report and post the contents of the text file that will open.

Note: By default, the utility outputs the log into system disk (it is usually the disk with installed operating system, C:\) root folder. The Log has a name like: TDSSKiller.Version_Date_Time_log.txt.Please download aswMBR ( 511KB ) to your desktop.Double click the aswMBR.exe icon to run itClick the Scan button to start the scanOn completion of the scan, click the save log button, save it to your desktop and post it in your next reply.

4 more replies
Relevance 49.2%

In Event Viewer Windows Logs System Errors Unibrain 1394 FireAPI Driver,Unibrain 1394 SBM Driver,UB1394 Miniport,The ubohci Failed To Start And
The cpuz133 Failed To Start The System Cannot Find The File specified.
I Do Not Know What This Is And I Would Like To Know How To Correct The Errors In Event Viewer, Windows 7 64bit

Thank You

Billy

Answer:Event Viewer Errors

CPU-Z is a freeware detection program base on the Panopsys hardware detection engine.

Cpu-Z allows you to get some info on your computer, including:

■ Processor name and vendor
■ Core stepping and process
■ Processor package
■ Processor current core voltage
■ Internal and external clocks, clock multiplier
■ Partial overclock detection
■ Processor features, including supported instructions sets.
■ L1 to L3 cache information : location, size, speed, technology.
■ Motherboard information : name, vendor, BIOS, chipset, memory, AGP.
■ Memory information : size, type, timings, specifications.

You should be able to delete this in the Control Panel under Programs and Features.

3 more replies
Relevance 49.2%

I got a new laptop recently i have been monitoring performance cause i had a problem with a different laptop but the same model. That problem seems to be ok but i checked the performance logs the other day and i kept getting error 100 which is a start up error on windows 7 but it had a error of 45166ms which isn't that long at all. These problems have not been affecting performance yet. I also keep getting error 300 which is a sleep start up error. I have configured windows recently taking off all the start up programs in msconfig would this result to things like this cause msconfig holds certain drivers. Should i even worry about this i guess would be the right question. Here are my logs for one night anyways i think the laptop went to sleep 3 times.

Level Date and Time Source Event ID Task Category
Warning 19/03/2011 21:43:32 Microsoft-Windows-Diagnostics-Performance 100 Boot Performance Monitoring "Windows has started up:
Boot Duration : 45166ms
IsDegradation : false
Incident Time (UTC) : ‎2011‎-‎03‎-‎19T21:41:01.702800300Z"
Critical 19/03/2011 19:52:06 Microsoft-Windows-Diagnostics-Performance 300 Standby Performance Monitoring "Windows has resumed from standby:
Standby Duration : 32744ms
Standby Incident Time (UTC) : ‎2011‎-‎03‎-‎19T16:16:56.986366500Z
Resume Duration : 761ms
Resume Incident Time (UTC) : ‎2011‎-‎03‎-... Read more

More replies
Relevance 49.2%

What is generating these errors has been tracked down. What can eliminate them has not...

SChannel errors are seen after each Windows Update.

Distributed COM (lack of permission) errors pop up after clicking on certain start menu tiles.

Though several posts in forums suggest how to change permissions via Component Services
and the registry, none of those measures are available here. Greyed out or "access denied."

Despite the error, the clicked start menu items (weather and finance) do eventually appear.

Answer:Event Viewer errors

Please provide us with your Event Viewer administrative logs by following these steps:
Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file here.

8 more replies
Relevance 49.2%

My Lenovo Thinkpad SL-510 (Windows 7 64-bit) is producing many Event Log Errors even though the Lenovo diagnostics report everything is fine. I ran SFC / SCANNOW which said it fixed many problems, but did not stop the Event Log Errors. How do I stop the errors? Attach.zip is attached, and the DDS.TXT file is reproduced here:
DDS (Ver_10-12-12.02) - NTFS_AMD64 Run by Ron Purcell at 18:47:09.94 on Tue 01/11/2011 Internet Explorer: 8.0.7600.16385 BrowserJavaVersion: 1.6.0_23 Microsoft Windows 7 Professional 6.1.7600.0.1252.1.1033.18.3933.2300 [GMT -8:00] AV: AntiVir Desktop *Enabled/Updated* {090F9C29-64CE-6C6F-379C-5901B49A85B7} SP: COMODO Defense+ *Enabled/Updated* {DC3D0F8D-B138-AAAA-0339-560EB3387C28} SP: Windows Defender *Enabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46} SP: AntiVir Desktop *Enabled/Updated* {B26E7DCD-42F4-63E1-0D2C-6273CF1DCF0A} FW: COMODO Firewall *Enabled* {5F676F4C-DD6D-A47C-12D6-C449366C71EE} ============== Running Processes =============== C:\Windows\system32\wininit.exe C:\Windows\system32\lsm.exe C:\Windows\system32\svchost.exe -k DcomLaunch C:\Windows\system32\ibmpmsvc.exe C:\Windows\system32\svchost.exe -k RPCSS C:\Program Files\COMODO\COMODO Internet Security\cmdagent.exe C:\Windows\system32\svchost.exe -k NetworkService C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted C:\Windows\system32\svchost.exe -k netsvcs C:\Windows\system32\svchost.exe -k Loc... Read more

Answer:Many Event Log errors, yet diagnostics run OK

Having many event log errors is par for the course on most systems. If you are having other issues as well, then you do have a problem. If not, then I wouldn't worry about it.

1 more replies
Relevance 49.2%

Does anyone know a solution for these warnings and error?

Attachment 2031

Attachment 2032

Attachment 2033

Answer:Event Viewer Errors

Hi aaron,

With the error it looks like the IPv6 part of the network stack is complaining that the DHCP server you are pointing to is not supplying a suitable address for the computer, This is I believe quite normal as most dhcp servers are not yet actually running IPv6 at the moment. Eventually the IPv6 will replace the current IPv4 (xxx.xxx.xxx.xxx) addresses used for TCP/IP

With the two warnings I can only suggest you post a feedback to MS with the details as they are the sofware vendoe for the two items causing the warnings

2 more replies
Relevance 49.2%

I think i have figured out some of the x64 OS freezes of which i read -

mine so far was out of date Video card drivers AND the video card default setting to use the system RAM instead of the GPU RAM. . . .

The two different source requests may have been trying to access the same ram space and corrupting system files in the space. . . . which is why i was getting the same corrupted system files everytime the system froze, but never got event error messages

just hoping i may help someone

sportsguy

More replies
Relevance 49.2%

I am trying to find how to solve a problem with my computer. My icons in My Pictures or My Documents are not showing what is in the folders. If I try to attach either a folder or a picture it will hang app the computer and freeze causing me to shutdown the program. Error report is returning with szAppVer : 4.531.9.1 szModName : hunapp. When I viewed event viewer it also stated application hang catagory (101) Event 1001 User N/A. I also noticed another error in the viewer. Source is Userenv, Catagory None, Event 1041, User System. I could use any kind of input here....Thanks

Answer:Errors on event viewer

I find that the www.eventid.net website...provides a good base for inputs on various event viewer errors.If you take a look, you will see that it's seldom one clear-cut thing producing the error or system impacts.Additionally...double-clicking on any Event Viewer line item provides additional detail about the error noted.How To Use Event Viewer - http://www.bleepingcomputer.com/forums/t/40108/how-to-use-event-viewer/ Louis

1 more replies
Relevance 49.2%

Hi all,
I have had a few BSOD on a secondary networked PC I use for some add on apps. I am pretty sure they are hardware related, but I was looking at the Event Log and it is reporting multiple errors connected with the Service Control Manager. The text is as follows :-

"The WinPcap Packet Driver (NPF) service failed to start due to the following error:
The system cannot find the file specified."

The log show this has occurred 77,645 times in the last 24 hours !!

There are approx 700 entries of :-

"The Computer Browser service depends on the Server service which failed to start because of the following error:
The dependency service or group failed to start."

I run McAfee AV and Firewall.

Any help appreciated.

Thanks
Andrew

Answer:Event log - multiple errors

Don't worry about the event log. Let's concentrate on the bsod.

Download BlueScreenView:
http://www.nirsoft.net/utils/blue_screen_view.html
unzip downloaded file and double click on BlueScreenView.exe to run the program.
when scanning is done, go to EDIT - Select All
Go to FILE - SAVE Selected Items, and save the report as BSOD.txt
Open BSOD.txt in Notepad, copy all of the content, and paste it into your next reply

7 more replies
Relevance 49.2%

Hello. I have been using hwinfo to monitor my PC, and it is reading WHEA errors. Checking in the event system viewer, they are all event ID 20, and event ID 5. The PC is barely a month old, and was originally using windows 8.1, and never had these errors. In fact, every error seems to have begun the exact date of my WIndows 10 installation. Any help and ideas exactly what is causing this would be greatly appreciated. I haven't had any BSOD just to clarify, just the error codes.

THEDUDE-Mon_03_28_2016__50423_12.zip

More replies
Relevance 49.2%

I searched and saw where this could be related to restore, so I went and created a checkpoint on system restore and went back into event viewer and there was the same error at the same time I did the creating a checkpoint. Here's the error:

Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object.
 
Details:
AddLegacyDriverFiles: Unable to back up image of binary Microsoft Link-Layer Discovery Protocol.
 
System Error:
Access is denied.

Answer:More errors in event viewer

Hi,

That error keeps on cropping up occasionally.
As the message suggests it has to do with permissions on some folders in the windir. It is generated whenever Windows Backup or any other back up software is invoked.

As it happens I just fixed it on my Insider Preview system a few hours ago.
Copy the entire lines of commands into a command prompt with admin rights and let it execute. It should return a message like "Operation successful" or something along those lines.
After that you'll never see the CAPI2 error again.

Cheers,

3 more replies
Relevance 49.2%

I just bought my computer 3 weeks ago and I was looking in the event viewer and there were all of these errors example below. are these errors normal do they fix them selves and am i going to have any trouble with my comp because of this. please help, thanks
Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
Source: Microsoft-Windows-Diagnostics-Performance
Date: 1/29/2008 9:20:07 PM
Event ID: 100
Task Category: Boot Performance Monitoring
Level: Critical
Keywords: Event Log
User: LOCAL SERVICE
Computer: Kalvert-PC
Description:
Windows has started up:
Boot Duration : 162087ms
IsDegradation : true
Incident Time (UTC) : 1/30/2008 3:16:58 AM
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Diagnostics-Performance" Guid="{cfc18ec0-96b1-4eba-961b-622caee05b0a}" />
<EventID>100</EventID>
<Version>1</Version>
<Level>1</Level>
<Task>4002</Task>
<Opcode>34</Opcode>
<Keywords>0x8000000000010000</Keywords>
<TimeCreated SystemTime="2008-01-30T03:20:07.382Z" />
<EventRecordID>354</EventRecordID>
<Correlation ActivityID="{00000000-E0E8-0000-CE0C-EE92EE62C801}" />
<Execution ProcessID="1824" ThreadID="2344&q... Read more

Answer:Event Viewer Errors

First try examining the Reliability Monitor for errors. You can get to this by clicking on Start and typing "Reliability" (without the quotes) and pressing Enter.

In the left hand pane, click on Reliability Monitor - then view the errors posted in the right hand pane. Let us know what you find and we'll move on from there.

3 more replies
Relevance 49.2%

Log Name: System
Source: atapi
Date: 29/04/2013 23:01:29
Event ID: 11
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer:
Description:
The driver detected a controller error on \Device\Ide\IdePort2.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="atapi" />
<EventID Qualifiers="49156">11</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-04-29T22:01:29.909179600Z" />
<EventRecordID>25162</EventRecordID>
<Channel>System</Channel>
<Computer> </Computer>
<Security />
</System>
<EventData>
<Data>\Device\Ide\IdePort2</Data>
<Binary>0000100001000000000000000B0004C004000000850100C00000000000000000000000000000000000000000000000000000000005100000</Binary>
</EventData>
</Event>

had these errors come up according microsoft it was due due poor cables not had this error come up before.

Answer:event viewer errors

This happened after installing new hitachi hds721010CLA330 1tb hard drive for my system.

2 more replies
Relevance 49.2%

I have several Win2k servers that I run performance monitoring on. To different degrees, each fills the application event log with perflib errors (at least one error for every update to the perfmon log). I have set the diskperf -y on all servers and this has reduced the total number of errors, but has not eleminated them.

Any ideas as to what to check, MSDN search returns nothing.

TIA
 

Answer:Perflib errors in event log

Is it the same error every time, or do the errors have different sources and messages?

There are about a dozen articles in the MS KB when I searched just on perflib. Without knowing what the errors are I can't point you at any one in particular.
 

3 more replies