Computer Support Forum

Booting a Win 10 DVD in UEFi Mode for Windows installation

Question: Booting a Win 10 DVD in UEFi Mode for Windows installation

How do I set my BIOS to have the DVD boot and install Windows 10 in UEFI mode? I do see a setting on my Asus motherboard UEFI "CSM Compatability" and in there are three options:
UEFI and Legacy OPROM
Legacy OPROM only
UEFI only

Do I select UEFI only option here?

What is the benefit of installing in UEFI vs Legacy? All I understand is that the system sets up more partitions.

Relevance 100%
Preferred Solution: Booting a Win 10 DVD in UEFi Mode for Windows installation

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Booting a Win 10 DVD in UEFi Mode for Windows installation

Anyone? :-)

10 more replies
Relevance 100.04%

Hi there. I've built a brand new HTPC and it has UEFI BIOS on it. I've tried to install Windows 7 with USB drive that I've made UEFI bootable with Rufus, but it gives me blue screen everytime after Windows goes from "Windows files are loading" screen to a Windows logo animation. The hard drive that I'm using is set to MBR, (I know that I should set it to GPT for UEFI installation). I don't want to have a UEFI version of Windows in my system anymore. How do I install legacy version of Windows 7 from USB stick on UEFI BIOS capable PC with HDD using MBR?

Answer:How to prevent Windows 7 installation from booting in UEFI mode?

Hi and welcome to SevenForums,
Enter your bios and go to Advanced and boot and disable secure boot,
If there is no option to disable secure boot look for OS Type and switch to Other os
After installing Microsoft Update KB3133977 for Windows 7, some users may encounter a "Secure Boot Violation" , which makes the system fail to boot into the operating system.

5 more replies
Relevance 79.54%

Hi there -

Can one install Windows 8.1 64-bit version in UEFI mode to one disk and leave all the other disks in the system using the NTFS mode. Also, must the Acronis 2015 Disk backup be saved on a disk with a GPT partition or not.

Many thanks in advance for any help - reading all about it on the net has totally confused me!

Answer:Windows 8.1 installation in UEFI mode

Yes you can have a OS on UEIF/GPT and have BIOS/MBR Data disk. You can't have 2 OS on different formats.
Acronis should run from a USB Drive I would go with FAT32 but you'll have to check with their Support Forum as to whether their recovery program will run from A NTFS USB or DVD
Quick search gets these answers https://kb.acronis.com/search/site/C...very%2520media I guess they are still using Lunix based recovery media.

4 more replies
Relevance 78.72%

First of all thanks for the excellent guide.

https://www.tenforums.com/tutorials/1...n-install.html

I have a few questions regarding the Windows 10 installation in UEFI mode:

I read in a couple of websites that for the installation and boot to be in "full" UEFI mode the option CSM must be disabled, can someone confirm this?

I have a GeForce GTX 460 which does not have the necessary GOP feature to have a UEFI boot, can i turn on the CSM option for a Legacy boot despite having Windows 10 installed in UEFI mode?

Can i format (in GPT mode) and partion my hard drive prior to the Windows 10 setup? Would i still need to delete all partions in the Windows setup to get the 4 partitions necessary for the UEFI installation? Or will they automatically appear since the hard drive was previously formated in GTP mode?

Thanks in advance and sorry for the bad english.

Answer:few questions regarding the Windows 10 installation in UEFI mode

Need some Clarification....
1. The OS you are updating from (7 or 8.1)
2. The Current Boot (UEFI secure boot On/Off or Legacy)
3. Sata Operation mode in BIOS (AHCI or anything else)

If running win8 or 8.1, no changes are needed to be made in BIOS while updating
If running 7 thing go a bot trickier..

2 more replies
Relevance 78.72%

Hello,

I bought new laptop (HP 250 G5) few days ago and it came without system on it so I tried to install Windows 10 from bootable DVD. I have both UEFI and Legacy modes enabled in BIOS.

When I try to boot from my Interna CD/DVD ROM Drive i just get some yellow screen and nothing happens.
I tried disabling Legacy Support but then I have no boot devices in UEFI mode.

Here's my BIOS setup:
Is it possible at all to boot Windows 10 from DVD in UEFI mode and am I doing something wrong?

Answer:Windows 10 installation from DVD in UEFI BIOS mode

You can`t have both enabled at the same time.

If you try UEFI, boot from the dvd drive, there should be 2 listings, your normal dvd and your UEFI dvd, just choose UEFI dvd.

If the disc doesn`t show up for either choice then you have a bad disc.

5 more replies
Relevance 78.72%

Hi,
I recently bought a hp pavilion 15 au038ca model. It came with a lot of bloatware so I decided to clean install Windows10. I used Windows Key Finder software to find my key since it's embedded in the bios, wrote it down and went ahead to install the same version as my previous windows: Windows 10 home x64.
Before I even started with the installation, I could not see my device in the boot options( I was using a bootable usb drive). So I went to the bios and enabled legacy support and when I switched my laptop back on into boot device options, there it was: a usb drive option. So i selected it and went on ahead to do a clean install of windows. Now the problem is, whenever I load up system defaults in bios and save it, my laptop does not boot into windows. It gives me this error:

Boot device not found.

Please install an operating system on your hard disk.

Hard Disk - (3F0)

...But as soon as I enable Legacy mode, it boots up into windows. My question is, how do I install windows into uefi mode and not legacy mode? Because I read many articles saying that uefi equals faster boot times and has more advantages than the older legacy mode. And whenever i try making a bootable uefi disk, there is still no device options when only the uefi mode is on. But when the legacy mode is on, then I can see my disk under the boot device options.
Second question, how do I change my hard disk partition to gpt from mbr?
Thank you
 

More replies
Relevance 78.31%

This week, I encountered the following strange problem for which I haven't found a final solution so far, though I have found some bandaids. But having a complete solution -or at least a reason why this problem occurs- would be great:
I have a working installation of Windows 7 Professional x64 in UEFI mode. The main disk, SSD #1, contains the following partitions (using GPT): ESP, MSR, system, data. An additional disk, HD #2, with a single data partition (using MBR) is also attached to the system. With this setup, everything works fine.
Now, after adding another disk, HD #3, to the system -my old system disk (bootable, using MBR, one active primary partition and an extend partition with three logical disks)- Windows will no longer boots completely: The boot process begins, the Windows logo is shown. Then, a message is shown in text mode "Windows is loading files" with a loading bar. After a while the boot process stops and I am dropped into the EFI shell. After removing the offending HD #3, Windows boots normally again.

I tried removing HD #2 and only attaching HD #3 together with SSD #1, but this yielded the same problem. Using SSD #1 by itself works fine though. Booting from a Linux live-cd works without problems. All disks and partitions are found and can be mounted. There, I erased the disk signature from the offending HD #3 and now Windows was able to boot and also found all disks and partitions correctly. But after a reboot the same problem reappeared.

My ... Read more

Answer:Windows stops booting in UEFI mode after adding another hard drive

Has HD#3 any active partitions?
What happens if you boot with HD#3 attached only?
How did you erase the disk signature? As far as I know you can only update it

9 more replies
Relevance 77.9%

Hi All,

I bought a new Acer V5-572 Laptop which came pre-installed with Linux and BIOS was UEFI mode selected. To install windows 8.1, I made a installable USB of windows 8.1 and selected Legacy boot in BIOS to boot from it. While installing I formatted the harddisk completely using DISKPART "clean" command. Finally, Windows 8.1 got installed on Legacy boot mode.

But now when I changed the boot mode from Legacy to UEFI, it doesnt boot from anything(not even from same USB) and gives error i.e no bootable device.
I tried ALT+F10 for going to Acer Factory setting, even that doesnt work. May be I have formatted System Recovery/Factory settings partition as well.
Can anybody help me here to boot from Windows - USB on UEFI mode ?

Thanks
Nitin

Answer:Windows 8 installation issue with UEFI Bios mode

I suppose my first question would be why would you want to install Windows 8 as Legacy?

If you have a Bootable Windows 8 flash drive, you need to use the Boot Device Menu and select the UEFI version of that device to boot into the UEFI configuration. The bios has to be set to allow for UEFI devices and the flash drive has to be formatted in the FAT32 configuration.

It won't boot anything as UEFI because you do not have a UEFI configured install of Windows 8.. or Linux.

3 more replies
Relevance 77.9%

When i try and boot my Windows 7 x64 DVD in UEFI mode my computer completely skips it and boots my hard drive. However when I boot in legacy mode i can boot the CD but i get the error 'Windows cannot be installed to this disk. The selected disk is of the GPT partition style'. I'm assuming i get this error because i'm not booting via UEFI mode.

Answer:Windows 7 Installation CD - Can boot in Legacy mode but not in UEFI

Where do you buy your Windows 7 DVD from?

9 more replies
Relevance 77.08%

I have followed the instructions from this site, more specifically UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with
and when I reach the "Starting Windows" screen with the windows logo, it stays there indefinitely. I tried both methods: Rufus and Diskpart, both yielded the same result.

The partition table of the disk is GPT.
UEFI is 2+ (Rampage IV Mobo)
Safe Boot is disabled
Tried with Fast Boot enabled and disabled.
Tried with CSM enabled and disabled. Works with CSM enabled, but not in UEFI mode.
Tried with SMART is enabled and disabled.
Tried with two different flash drives (just to make sure it was not the problem).
SATA is set to AHCI.

I'm not sure of what else I should try.
Any help is appreciated.

Answer:Flash drive windows 7 installation in UEFI mode not working

What are the exact settings choices for UEFI, CSM, Legacy BIOS and BIOS Boot priority? Camera snaps will help: Screenshots and Files - Upload and Post in Seven Forums - Windows 7 Forums

If you want to install to UEFI did you format the stick for UEFI Bootable USB Flash Drive - Create in Windows using Option One? Then did you boot the stick as a UEFI device?

4 more replies
Relevance 72.57%

I got my y510 a month ago and  now i delet the win 8 (Complately Formated the HDD)& trying to inistall win 8.1 in uefi mode but instead if booting dvd which have efi support it shows me some ip like numbers (ipv4 , ipv5) & asks me to restart Now I wanna know Is there any solution for this ??













Solved!

Go to Solution.

Answer:Problem with booting in uefi mode

hi Mortaza,
 
Welcoem to the Forums.
 
Just to verify, did you created a bootable UEFI Windows 8.1 installer via a USB flashdrive? If you did, this is most likely blocked by the settings in the BIOS as the system is bypassing it and is trying to boot via LAN.
 
Try to:
1. Boot in the BIOS and set the following:
 
Security Tab:
Secure Boot = Disabled (if applicable)
 
Exit Tab:
OS Optimized Defaults = Disabled / Other OS (if applicable)
 
2. When done, press F10 to save and exit and repeatedly tap F12 and see if you can boot from the UEFI Windows 8.1 USB Installer.
 
Let me know how it goes.
 
 
Regards

4 more replies
Relevance 72.16%

It might be worth it to make a sticky referencing the Windows 7 tutorial for creating USB flash installation media, specifically the part 11 about moving the EFI files around. I have been bashing my head trying to figure out why my laptop refuses to acknowledge ANY USB Media (never tried CDs) and the conclusion I came to was that my laptop had booting from USB disabled, NOT that the ISO still doesn't have working boot files when flashed with Rufus.

It would've been nice to know before caving and upgrading (and subsequently downgrading) my Windows 8.1 install.

I am sorry that I'm ranting about this, but I honestly did try searching the problems and such, and not finding anything I assumed that it was a problem with my specific hardware.

I'm sure it is obvious where to find it, but it would be nice if in the installation and setup forum there is a sticky with links to relevant tutorials (such as setting up dual-boot, making a USB flash drive, installing the TP in a virtual machine)

Answer:Booting USB installation media on a UEFI system.

I am going to try tomorrow morning and see whether I could install Win10TP with the bootable USB drive, I always use the DVD but would like to try the USB disk.

22 more replies
Relevance 71.75%

Hi

I have a system recently converted to UEFI using MBR2GPT. Today I created a bootable DVD using Kyhi's Recovery Tools ISO and want to run it up to find out exactly what I've got and how it works. Snag is I can't boot up from CD or DVD - my system just hangs.

I've done some searching on the internet and find that I have to disable Secure Boot in the UEFI firmware. I can't, I haven't got that option - although I have been told that Secure Boot will only appear if I have UEFI Only selected. It doesn't, I've checked. What I do have, however, is a setting called Storage Boot Option Control with the options Disabled, UEFI Only, Legacy Only, Legacy First and UEFI First - in that order. Does that mean anything to anyone? It's a Gigabyte Z97P-D3 mobo. When I converted to UEFI I made no changes (under advice) to my mobo firmware which is set to UEFI and Legacy - the other options are UEFI Only and Legacy Only.

When it comes to the boot sequence, first in the list is Windows Boot Manager followed by the disk model - the CD/DVD reader is second. Swapping them around just results in a flashing cursor on the screen.

My question therefore is: just how do I get my PC to boot from CD or DVD? I have a strong feeling that NavyLCDR would say I should use BCDboot with the ALL switch to copy both the UEFI and BIOS files to the System Reserved partition since currently I only have the files for UEFI in there as far as I am aware. Certainly its only around 10.6MB at present whereas BIOS files... Read more

Answer:Booting from WinPE CD/DVD Whilst in UEFI Mode

Originally Posted by TraceyW


Hi

I have a system recently converted to UEFI using MBR2GPT. Today I created a bootable DVD using Kyhi's Recovery Tools ISO and want to run it up to find out exactly what I've got and how it works. Snag is I can't boot up from CD or DVD - my system just hangs.

I've done some searching on the internet and find that I have to disable Secure Boot in the UEFI firmware. I can't, I haven't got that option - although I have been told that Secure Boot will only appear if I have UEFI Only selected. It doesn't, I've checked. What I do have, however, is a setting called Storage Boot Option Control with the options Disabled, UEFI Only, Legacy Only, Legacy First and UEFI First - in that order. Does that mean anything to anyone? It's a Gigabyte Z97P-D3 mobo. When I converted to UEFI I made no changes (under advice) to my mobo firmware which is set to UEFI and Legacy - the other options are UEFI Only and Legacy Only.

When it comes to the boot sequence, first in the list is Windows Boot Manager followed by the disk model - the CD/DVD reader is second. Swapping them around just results in a flashing cursor on the screen.

My question therefore is: just how do I get my PC to boot from CD or DVD? I have a strong feeling that NavyLCDR would say I should use BCDboot with the ALL switch to copy both the UEFI and BIOS files to the System Reserved partition since currently I only have the files for UEFI in there as far as I am aware. Certainly its o... Read more

0 more replies
Relevance 70.93%

hi folks, do you know how to boot a dvd in legacy-mode (without UEFI)? my lenovo B570 UEFI has very little options, so i assume the other options (e.g. booting in legacy mode) are hidden somewhere. i also found a guide from lenovo for the thinkpad series, but the option (see step 3) clearly is missing with my notebook. any ideas?? thank you very much in advance.. -benni

More replies
Relevance 70.11%

===========DELL BIOS==============
In many situation, i have to boot to WinPE in uefi mode with legacy support to repair something
i would like to see the uefi boot line in this picture
but when i create a usb boot with a hiden fat32 partition in my usb, i cant see this line? what wrong with my usbi have try to setup MBR and PBR by bootice but nothing change
can someone teach me how to create 2 hiden fat32 partition to boot in this caseaddition
in legacy mode, i use plop boot manager so i can choose with partition to boot but in uefi i cant do this
i want my laptop can automatically recognize my fat32 partition
thanks

More replies
Relevance 70.11%

===========DELL BIOS==============
In many situation, i have to boot to WinPE in uefi mode with legacy support to repair something
i would like to see the uefi boot line in this picture
but when i create a usb boot with a hiden fat32 partition in my usb, i cant see this line? what wrong with my usbi have try to setup MBR and PBR by bootice but nothing change
can someone teach me how to create 2 hiden fat32 partition to boot in this caseaddition
in legacy mode, i use plop boot manager so i can choose with partition to boot but in uefi i cant do this
i want my laptop can automatically recognize my fat32 partition
thanks

More replies
Relevance 69.7%

Hi all, I want to install windows7 on this notebook in UEFI mode because GPT and ADF support. Notebook is tested by memtest and other stuff and  runing and installed from LEGACY MODE is ok. hewer, setting  in bios boot mode to uefi (and disabling secure boot) I can not succesfuly boot from original w764bit DVD. System start booting, start  You can see Starting Windows but instead of animation,  there is only a line with the junk on display an then it freeze Any solution for this ? 

More replies
Relevance 69.7%

I want to install Windows 7 Pro 64 bit on Sat Pro C50 (downgrade if you like - supplied with Win 8), but I want it UEFI booting, with GPT partitioning.
I am happy to wipe existing partitions if that solves problem.

I _have_ disabled Secure Boot.
Booting Win 8 install DVD works;
Setting CSM boot and booting from Win 7 DVD works - but this isn't what I want.
Setting back to UEFI boot and boot Win7 install media - locks up at "Starting Windows" screen.
Media _is_ good, works OK on other manufacturers' PCs.

I am not convinced this is a Microsoft problem.

Answer:Satellite Pro C50: Installation of Win 7 using UEFI boot mode

Hi

On Toshiba notebooks where UEFI BIOS is available, it?s necessary to disable secure boot and to change the boot mode to CSM in order to boot from external sources and to install other systems than Win 8 or Win 8.1

Some workarounds in the internet describes the installation of Windows 7 in UEFI mode but I doubt this will be possible on Toshiba notebooks since the BIOS is different and modified for each notebook series.

2 more replies
Relevance 69.7%

Hey all. 
I've got a Dell Latitude E6320 where the driver installer for the Dell Wireless 1530 wireless card fails.  I'm running Windows 7 64-bit, the computer boots in UEFI mode, and I've installed all of the drivers according to the Latitude E-Family Re-Image Guide.
I've got a log, as well, it says this:
[09/13/16 16:24:47]    Dell Update Package Execution Start[09/13/16 16:24:47]    Original command line: E6320-NIC_DRVR_WIN_A01_R294111.EXE  /s[09/13/16 16:24:47]    DUPFramework version: 3.0.80.1[09/13/16 16:24:47]    User Command: unattended[09/13/16 16:24:47]    DUP Capabilities Value: 6291455 (0x5FFFFF)[09/13/16 16:24:47]    DUP Vendor Software Version: A01[09/13/16 16:24:47]    Local System/Model Compatible with this Package? Yes[09/13/16 16:24:47]    Local System OS Version: 6.1.1.0[09/13/16 16:24:47]    OS Compatible with this Package? Yes[09/13/16 16:24:47]    Local System OS Language: EN[09/13/16 16:24:47]    Language Compatible with this Package? Yes[09/13/16 16:24:48]    Identified Behavior : unattended[09/13/16 16:24:48]    Temporary payload log file name: C:\Users\Administrator\AppData\Local\dell\drivers\E6320-NIC_DRVR_WIN_A01_R294111\DUP9B64.tmp[09/13/16 16:24:48]    Translated Command Line : setup.exe /s /v" LOGFILE=&q... Read more

More replies
Relevance 69.29%

I am not sure if this subforum is the right place, if not, pleases help me transfer to the right forum...

I recently just build a new setup with Asus P8Z77-V LK, this motherboard comes with UEFI boot and legacy BIOS boot support.

So I tested install windows 7 in both mode, and I didn't find any advantage of UEFI consider it is a new technology been promoted quite a lot for recent years.

The benefit I found is: a graphic BIOS setup, which is useless to most users if you don't OC. Even you did, I still find using keyboard to navigate through the menu is much easier than mouse.

Faster boot time? very negligible, could be 31 seconds compare to 28 seconds. As I timed use my stopwatch, the value could include a few seconds human error as well.

Support boot from > 2.2TB HDD? nowadays most user use SSD as boot drive so this really doesn't matter.

GPT disk partition? don't see any benefit here compare to legacy MBR...

Anyone can enlighten me what is the advantage of UEFI here?

Thanks a lot!

Answer:What's the benefit of UEFI and install Windows in UEFI mode?

Thanks for adding information about EFI BIOS which present a problem for many during installation and repairs.

For this reason alone, I would advise disabling EFI BIOS in BIOS boot order or choosing Legacy BIOS in BIOS setup, installing normally to an MBR disk.

Wiping a HD already formatted as GPT disk with Diskpart Clean Command can clear the way for it to install as MBR. Sometimes it also takes runnning the command "Convert MBR" to change disk from GPT.

3 more replies
Relevance 68.88%

hi.

I am having an issue with my current laptop (ASUS k46CB). I was trying to install Win 7 64 bit in UEFI mode but as it was loading windows flag, it just hang for indefinite period.

I was able to install using legacy mode but that does not help as I need to get my Win 7 installed in GPT partition.

Can anyone share some light on this issue ?

there was another thread opened but somehow I did not see any answers to my problem.

Answer:Win 7 Home Premium 64 bit installation issue on UEFI mode

Are you booting the DVD in UEFI mode?

9 more replies
Relevance 68.88%

I have preinstalled win 8 and want to put win 7, but I see where to change the UEFI bios.
NB10-A-110 - PU143E

Answer:Re: NB10-A-110 PU143E - Win 8 installation - how to change UEFI mode

Hi

You have to update the BIOS.
Then the UEFI /CSM mode should be visible in the BIOS and you should be able to change it.

3 more replies
Relevance 63.96%

Hi everyone,

I'm attemping to install Windows 7 64 bits in a Sony vaio SVE14A25CLB laptop. Many threads in this forum already help me a lot to change the UEFI settings to boot from a DVD or USB device in UEFI mode and I clean the hard drive with diskpart. Also secure boot is disabled.

My System specs:
Sony Vaio SVE14A25CLB
Intel Core i5 -3210M, 2.50GHz
Sony Vaio Intel HM76 Express Chipset
4GB DDR3 SDRAM 799MHz
Intel HD Graphics 4000, AMD Radeon HD 7670M 1GB
HDD 750GB, 5400 rpm

My next opponent in this journey is while windows setup is loading the files, on UEFI mode, it just stop at loading the disk.sys file (checked in safe mode), but in Legacy mode (BIOS) the windows setup (DVD or USB) start without issues (this is how I managed use diskpart).

I don't think it could be due to hard drive or memory issues (I didn't run any tests yet), as the windows setup start normaly on Legacy mode and It install successfully Windows 7 on a MBR partition.

From factory, the laptop comes with Windows 8, but even if the general performance is very good, it was some "features" that bother me. So hard drive already has GPT and I want to keep that partition table mode in case I need to do a dual boot with windows 8 in the future.

After clean the hard drive I even created GPT partitions following these steps:
Sample: Configure UEFI/GPT-Based Hard Drive Partitions by Using Windows PE and DiskPart (see Sample DiskPart Script: Default Configuration)

I ha... Read more

Answer:Windows 7 setup stop in disk.sys on UEFI mode, but in BIOS mode it did

Sony boot key is F12.

Make sure you have followed Option One in UEFI Bootable USB Flash Drive - Create in Windows
to create the flash stick.

To install Win7 in UEFI mode sometimes requires some level of CSM or Legacy set in BIOS, even "Boot UEFI First." You will need to scour those listings, post back camera snaps of all available choices for UEFI, Legacy, CSM, and boot order. Are you choosing UEFI device to boot. That would point to the media being the problem.

At Eight Forums they can help you derive your Product Key so that you can reinstall 8 to an MBR disk using media they should also be able to link you to. This is providing the BIOS won't auto-activate on MBR. These mysteries are all shrouded in EightForums which I will get over to one day when Win7 stops being the most popular OS and keeping us so busy here.

2 more replies
Relevance 63.14%

I can't install any Windows on GPT. (UEFI), but I can in CSM-BIOS (MBR) When the installation is nearing completion I see the message: Windows could not update the computer's boot configuration. Installation cannot proceed.
I don't have partition for recovery.
In the diskpart I used: list disk, select disk 0, clean, convert GPT.
Please help.

More replies
Relevance 63.14%

i bought a laptop customised from HIDevolution.com recently and by default, they have installed windows 8 in Legacy mode (in HIDevolution installed SSD). now i wish to switch to UEFI mode. will simple reset in windows 8 give me an option for changing the BIOS mode? please help

Answer:how to boot windows 8 in UEFI mode having Legacy mode now?

Changing from legacy to UEFI mode has to be done before installing Windows:http://technet.microsoft.com/en-us/...

2 more replies
Relevance 62.32%

Problem is WINDOWS 7 does not boot from the 4TB disk alone. There is a 2 line error message "ReBoot and Select Proper Boot Device Or Insert Boot Media in Selected Boot device and press a key". The system boots only when both the hard disks are connected.



Did any update of BIOS to UEFI from ASUS. Copied the the partition from 1TB to 4TB hard drive via AOMEI Partition Assistant. There is also a hidden folder \WINDOWS\Boot on both the physical disks. Moreover,EasyBCD shows the Bootloader Path to 4TB disk c:\Windows\system32\winload.exe.

Any guidance on how to change the system partition from E: to C:

More replies
Relevance 61.91%

Sometime in the fall I started getting Windows 10 update errors trying to install 1607 (the anniversary update I believe). After trying different fixes I just ignored it for a while hoping windows would come up with a fix. 6 months later and I'd like to finally resolved this issue once and for all.

Windows Update Failure

I found I can use msinfo32 from the cmd shell to see my BIOS Mode which indicates I'm in UEFI
So I'm not entirely sure what the problem is. I did some funky things when I first built and installed Windows on this computer about a year ago. I have a 3TB Hard Drive and a 500GB SSD. And I found out I wasn't able to use all 3TB without using a GPT. Found some guide online followed the steps and fixed that issue.

I think there was an issue after that where the 3TB hard drive had the Boot part on it, and I followed some other guide to get my SSD to be the boot drive. But I think what I did then has put something in a weird state thats causing the update issue above.

Heres the Partitions
And heres using diskpart
Looking at other peoples partitions when using UEFI and GPT they have some partitions I don't have. Like MSR, System, Recovery etc... but mine just has the one single Primary partition. Recommended UEFI-Based Disk-Partition Configurations What I also find weird is that my boot partition is Disk 1 instead of Disk 0. If I unplug the HDD and boot the computer, then the SSD becomes Drive 0 but the update still fails.

Unfortunately I'm in that place... Read more

Answer:'Unsupported Disk Layout for UEFI Firmware' yet BIOS Mode set to UEFI

It looks to me that you don't have a UEFI install you have an MBR (legacy) install. In your BIOS what is listed as your primary boot device

22 more replies
Relevance 61.91%

I need to change some setting in my UEFI/BIOS but it is stuck in ready only mode.
All options are blanked out except for "exit". How can I get it to let me edit the settings again?

Answer:Cannot change UEFI settings / UEFI stuck in read only mode

You may have to disable the "Secure Boot" option first.

10 more replies
Relevance 61.5%

Hello guys,
First of all my english can be sux,Sorry for that i hope i can tell my problem properly.

Last days, I installed Hackintosh to my pc, and i did some efi changes for Hackintosh. After i bored and deleted hackintosh part. Than now i cant start my computer with uefi.When i open ''Enable CSM'' its starting but ;its starting like this. It was starting no intel and windows 8 circle was spining under asus logo.
An there is another problem when i Disable Csm, There is no add boot section ; How can i turn back to my orginal settings ? Please help me, i asked all of my friends but no one to help me.

Answer:Windows 8.1 Booting with UEFI Problem.

You would need to reinstall Windows 8. It should fix the MBR during the install. If not. Try this to see if it works. https://neosmart.net/EasyBCD/

1 more replies
Relevance 61.09%

On my computer there is a pre-installed Windows 8 which works fine for
UEFI boot (Secure boot not necessary).

Now when I switch in UEFI setup at boot time the UEFI mode into the CSM (BIOS) mode
and restart then Windows 8 is not starting any more.

As far as I find out an UEFI-based Windows 8 can only boot with UEFI mode enabled.

So my question is: Can I turn an existing UEFI based Windows 8 installation into
an CSM/BIOS based installation (=a Win8 which boots successfully even when I enable CSM in UEFI setup) ?

If yes: How do I do that?

Peter

Answer:Can I turn a Win8 installation for UEFI into CSM-Mode Win8

What OS are you trying to install?

Your other thread is about dualing booting Windows 7 & 8,
Can I boot with one Bootmanager Win 8 and Win7?
Windows 7 & 8 will dual boot in UEFI mode.

1 more replies
Relevance 61.09%

After installing a round of usual updates (Microsoft Security updates, Virus definition updates), my computer asked to restart so it could finish applying the updates. Nothing suspicious there, as this is pretty normal. However, when it restarted, my computer booted to the motherboard's UEFI (ASRock motherboard) for whatever reason. I just selected "Save Changes and Exit" to continue booting into Windows. However, now my computer goes into the UEFI every time it starts up. How do I make it go directly to Windows again?

Answer:Computer is now booting to the UEFI instead of directly to Windows

  
Quote: Originally Posted by arrowM


After installing a round of usual updates (Microsoft Security updates, Virus definition updates), my computer asked to restart so it could finish applying the updates. Nothing suspicious there, as this is pretty normal. However, when it restarted, my computer booted to the motherboard's UEFI (ASRock motherboard) for whatever reason. I just selected "Save Changes and Exit" to continue booting into Windows. However, now my computer goes into the UEFI every time it starts up. How do I make it go directly to Windows again?


Welcome to Sevenforums,

An update might have changed/reset the way in Bios the primary disk boot. Check in your Bios settings for disk options if its set to AHCI, IDE, or RAID mode.

Choose AHCI if you're not doing any RAID0/1/5/10

9 more replies
Relevance 61.09%

Hi,

I'm trying to make a Windows To Go image for my PC repair business using Rufus and a Windows 10 Pro ISO from MS Techbench. It boots perfectly fine on most computers except one. The computer I am trying to boot off is running Windows 8.1 with a UEFI bios. It's got a weird "EFI File Navigator" which is a pain in my rear end. When I try booting from it, it gives me an error. A picture of which is attached.


Any ideas?

Thanks.

Answer:Windows 10 To Go Image not booting on Computer with UEFI

Convert the partition to FAT32?

11 more replies
Relevance 61.09%

Hi all,

Ok, I have a new lenovo ideapad 305 (system is UEFI boot), I used minitool partition wizard to resize the c: & d: drives (to increase space on the D) but didn't touch anything else, rebooted into windows & it seemed nothing had changed, so I booted up by USB and the partitions were exactly what I had changed them to. Thinking this was really weird, I tried rebooting & have not been able to get into windows since.
I have tried recovery through the windows 8.1 cd but it does not recognise the partitions at all! So I can't even use diskpart or the like, I have tried several boot recovery tools, some see the partitions & some don't, so I guess I need to make the partitions UEFI-enabled? I'm not fully savvy with UEFI & I've tried every piece of advice I could find, but i'm stuck, any clues?

Thanks for any help!

Answer:Partition resize, Windows 8.1 not booting, UEFI

Just to update, I've gone through the BIOS, tried disabling secure boot, swapping between UEFI First and Legacy First, but cannot get the windows dvd (I've tried the windows 8.1 dvd (don't have the repair disc)) to see the partitions or even refresh or reset, it gives the error "the drive where windows is installed is locked" or "unable to reset your pc. a required drive partition is missing", but the minitool wizard sees the partitions just fine. I've tried several discs such as hiren's cd just to try to get to a GUI (mini windows) but always get a bluescreen (trying to load the GUI). I tried GParted, also no luck.

I tried the System recovery from the Novo Button Menu, but all I get is "Default boot device missing or boot failed" it then demands installation media which I already know won't help with recovery.
Would it be right to assume (since at least some tools can see the partitions)
that it is simply a problem with how the partition table is being identified? If that's the case, is there any software tool that can correct it?
I'd rather fix the problem than reload the whole thing (but it looks like I'll end up doing just that), any ideas?

2 more replies
Relevance 61.09%

Hi all,

This is my situation:
Running Windows 10 x64 on a UEFI-system.Trying to install Windows 7 x64 on a VHD for dual booting (such as in http://www.techrepublic.com/blog/win...8-using-a-vhd/)

I running into troubles that I think are having to do with UEFI. Secure boot is disabled.

I've tried these things:

Situation 1:
Create a bootable USB using Rufus (GPT partition)When booting I get this error.

Situation 2:
Mount the VHD.Manually install Windows 7 using Dism /apply-image command.Add bootfilesAdd entry in Boot Loader (using EasyBCD).When booting I get a black screen (nothing else, even ''starting Windows'' does not occur).

So currently I have no idea what to do next. Could anyone give me assistance?

Thanks in advance!

Answer:Problems dual booting Windows 7/10 (UEFI?)

Hi,






Add entry in Boot Loader (using EasyBCD).



That's what's caused it. So, yes it is UEFI related and GPT related too.

Cheers,

5 more replies
Relevance 61.09%

Hi,

I'm trying to make a Windows To Go image for my PC repair business using Rufus and a Windows 10 Pro ISO from MS Techbench. It boots perfectly fine on most computers except one. The computer I am trying to boot off is running Windows 8.1 with a UEFI bios. It's got a weird "EFI File Navigator" which is a pain in my rear end. When I try booting from it, it gives me an error. A picture of which is attached.


Any ideas?

Thanks.

More replies
Relevance 61.09%

Hi all,

This is my situation:
Running Windows 10 x64 on a UEFI-system.Trying to install Windows 7 x64 on a VHD for dual booting (such as in http://www.techrepublic.com/blog/win...8-using-a-vhd/)

I running into troubles that I think are having to do with UEFI. Secure boot is disabled.

I've tried these things:

Situation 1:
Create a bootable USB using Rufus (GPT partition)When booting I get this error.

Situation 2:
Mount the VHD.Manually install Windows 7 using Dism /apply-image command.Add bootfilesAdd entry in Boot Loader (using EasyBCD).When booting I get a black screen (nothing else, even ''starting Windows'' does not occur).

So currently I have no idea what to do next. Could anyone give me assistance?

Thanks in advance!

Answer:Problems dual booting Windows 7/10 (UEFI?)

Hi,






Add entry in Boot Loader (using EasyBCD).



That's what's caused it. So, yes it is UEFI related and GPT related too.

Cheers,

0 more replies
Relevance 61.09%

Hi all,

Ok, I have a new lenovo ideapad 305 (system is UEFI boot), I used minitool partition wizard to resize the c: & d: drives (to increase space on the D) but didn't touch anything else, rebooted into windows & it seemed nothing had changed, so I booted up by USB and the partitions were exactly what I had changed them to. Thinking this was really weird, I tried rebooting & have not been able to get into windows since.
I have tried recovery through the windows 8.1 cd but it does not recognise the partitions at all! So I can't even use diskpart or the like, I have tried several boot recovery tools, some see the partitions & some don't, so I guess I need to make the partitions UEFI-enabled? I'm not fully savvy with UEFI & I've tried every piece of advice I could find, but i'm stuck, any clues?

Thanks for any help!
 

More replies
Relevance 61.09%

Hi all,

Ok, I have a new lenovo ideapad 305 (system is UEFI boot), I used minitool partition wizard to resize the c: & d: drives (to increase space on the D) but didn't touch anything else, rebooted into windows & it seemed nothing had changed, so I booted up by USB and the partitions were exactly what I had changed them to. Thinking this was really weird, I tried rebooting & have not been able to get into windows since.
I have tried recovery through the windows 8.1 cd but it does not recognise the partitions at all! So I can't even use diskpart or the like, I have tried several boot recovery tools, some see the partitions & some don't, so I guess I need to make the partitions UEFI-enabled? I'm not fully savvy with UEFI & I've tried every piece of advice I could find, but i'm stuck, any clues?

Thanks for any help!

More replies
Relevance 61.09%

Hi all,

Ok, I have a new lenovo ideapad 305 (system is UEFI boot), I used minitool partition wizard to resize the c: & d: drives (to increase space on the D) but didn't touch anything else, rebooted into windows & it seemed nothing had changed, so I booted
up by USB and the partitions were exactly what I had changed them to. Thinking this was really weird, I tried rebooting & have not been able to get into windows since.
I have tried recovery through the windows 8.1 cd but it does not recognise the partitions at all! So I can't even use diskpart or the like, I have tried several boot recovery tools, some see the partitions & some don't, so I guess I need to make the partitions
UEFI-enabled? I'm not fully savvy with UEFI & I've tried every piece of advice I could find, but i'm stuck, any clues?

Thanks for any help!

More replies
Relevance 61.09%

So I bought a WD Green 3TB and made two partitions > 40Gb and the rest as second partition. Since the second partition is more than 2.2 TB I had to partition entire drive with GPT.

I was not able to install windows 8.1 from a flash drive on it. Later I realized I had to enable EFI from BIOS, which I did but the BIOS had no option of enabling EFI Boot from USB HDD,

only CD/DVD.

Does this mean I will not be able to install windows on a GPT partition with a USB flash drive or am I missing something?

Anyone using windows on GPT partition installed with a flash drive?

Thanks.
 

Answer:UEFI, Windows 8.1, 3TB and booting from flash drive.

http://www.eightforums.com/tutorials/15458-uefi-bootable-usb-flash-drive-create-windows.html

Try option 2.
 

31 more replies
Relevance 61.09%

Hi all,

Ok, I have a new lenovo ideapad 305 (system is UEFI boot), I used minitool partition wizard (on a bootable USB) to resize the c: & d: drives (to increase space on the D) but didn't touch anything else, rebooted into windows & it seemed nothing had changed, so I booted up again on the minitool wizard USB and the partitions were exactly what I had changed them to. Thinking this was really weird, I tried rebooting to windows & have not been able to get into windows since.

I've gone through the BIOS, tried disabling secure boot, swapping between UEFI First and Legacy First, but cannot get the windows dvd (I've tried the windows 8.1 dvd (don't have the repair disc)) to see the partitions or even refresh or reset, it gives the error "the drive where windows is installed is locked" or "unable to reset your pc. a required drive partition is missing", but the minitool wizard sees the partitions just fine. I've tried several discs such as hiren's cd just to try to get to a GUI (mini windows) but always get a bluescreen (trying to load the GUI). I tried GParted, also no luck.

I tried the System recovery from the Novo Button Menu, but all I get is "Default boot device missing or boot failed" it then demands installation media which I already know won't help with recovery.

Would it be right to assume (since at least some tools can see the partitions) that it is simply a problem with how the partition table is being identified? If that's the case, is there any softw... Read more

Answer:Partition resized, Windows 8.1 not booting, UEFI

I always recommend a person do a complete disk image using Macrium or Aoemi before moving partitions but that being said see this page. If you can get to a command prompt using the Windows install disk use the diskpart commands shown. If it does not work then I think you are looking at a reinstall.

2 more replies
Relevance 60.27%

Hi I'm new to eight forums, I hope i can become a valued member soon.

I purchased a laptop in Korea not long ago, i came with the option of Win7 or 8 but i chose to get it without an OS because I didnt want an OS in hangul. I installed Windows 7 on it and I've been using it fine ever since. Now I have decided to move on to Windows 8. And since my laptop has UEFI capabilities I might as well go all out.

But, I want to make sure I do it properly and I would like to understand a few things first.
In my bios I have the following settings (I'm only listing the things that would have something to do with UEFI or things I have no idea about.

ADVANCED:

XHCI - It's set to Auto, other options include Enabled, Disabled and Smart Auto. I have no idea what this function is and i assume i should leave it.

HDC Configure As - I have no idea what this is either and it's set to AHCI. Other option is IDE.

VT Suport - Whatever it is its enabled.
BOOT:

Boot Type - Set to Dual Boot Type - I guess I will change that to UEFI when I go to install Windows 8.

Skip EFI Image in CdROM - I should disable that I guess/
__
SOOooo.. Is there anything I should know about, especially about the settings in the Advanced section? If someone could explain what they are I would appreciate it very much. I'm greatful for any tips you guys could provide.
Thanks in advance!

Answer:First Installation of Windows 8 and UEFI

As you have a uEFI/BIOS firmware.
How to install Windows 64 bit on a uEFI/BIOS firmware:

UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Help Forums
or
UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with

For more info on uEFI:
Windows and GPT FAQ
Unified Extensible Firmware Interface - Wikipedia, the free encyclopedia
UEFI and Windows
Technical Note: UEFI BIOS vs. Legacy BIOS - YouTube
Sample: Configure UEFI/GPT-Based Hard Drive Partitions by Using Windows PE and DiskPart

For UEFU/BIOS firmware, set to load default setting.

2 more replies
Relevance 60.27%

Is there any way to install windows 7 32 bit on Asus T100T? In T100T there is only 32-bit UEFI and it cannot be changed on legacy BIOS. Win 7 32-bit does not support UEFI (why not?) but is there someway to bypass that i.e. would it work with some 3rd party
bootloader or something like that?

Answer:Windows 7 32-bit UEFI installation

The reason why it wasn't supported in Win7 is due to an incorrect market forcast. Initially, when UEFI 2.3.1 spec was worked on and brought to the desktop, 32bit OSes were thought to have been eliminated from the market. If you recall a long time ago, the
rumors of Windows 8 were it would only come in a 64 and 128bit versions and no 32bit. As such, the strategy was to eliminate it, and it started with UEFI support in Vista SP1 x64 but not 32. The same continued on with Windows 7 releases. However, it was obvious
that 32bit was still very important and that no one would be buying a 128bit OS, so Windows 8 x86 was made to support UEFI.
Now down to technical things, it is the bootloader of Windows 7 that has the most problem. I have had limited problems with other interfaces, such as WMI returning garbage.
Using setup isn't going to work out because it may detect the firmware's capabilities and convert the disk to GPT. The key to have Win7 x86 boot on a UEFI board is to not use the System Reserved partition. This means you would have to run diskpart to format
the disk, and then using DISM to apply the image. NOTE: I have not attempted to deploy the OS on that particular hardware and BIOS version. It may still have issues or not able to boot.

8 more replies
Relevance 60.27%

Hi people,
I have some problem with installation Windows 10 UEFI on Samsung 850 EVO SSD.
Actually I installed everything only my problem is because I could boot only if in BIOS is set option with Windows Boot Manager

P1 Windows Boot Manager Samsung 850 EVO
P1 Samsung 850 EVO

Before I had Windows 7 Installed on other SSD in Legacy Mode.
I want to install properly Windows 10 on Samsung 850 EVO without Windows Boot Manager.
Is it that possible in UEFI Mode?
My system is i7-5820K - Rampage V Extreme - Dominator Platinum DDR4 2666

More replies
Relevance 60.27%

ok... i upgraded from win7 to win8... and now i got to know that win8 would boot even more faster if it has uefi configuration,but to my bad it wasn't enabled in my intel dh55pj motherboard bios... now how do i install windows 8 again with uefi config. ?? i really have no idea about the installation in this mode

EDIT: after upgrading to win8 i had to refresh my pc ,since live tiles weren't working and i didn't know how to solve the problem, after refreshing i ran intel driver update utility and installed latest chipset software and updated the wddm 1.1(intel HD graphics) to intel HD graphics from the device manager

Answer:uefi installation of windows 8

From a quick look at the intel dh55pj on the Intel web site, the board is to old to have UEFI/BIOS firmware.

Intel? Desktop Board DH55PJ

2 more replies
Relevance 60.27%

So basically back in the days a simple as F8 boots you to safe mode or F12 could bring up boot menu where you could boot from a flash drive or an optical disc , use a tool like hirens boot cd to undo the mess or just do a windows upgrade and you are good .

Now what's the new trend as UEFI bioses just lock you out from both bios and boot menus unless you legitimately pick those from inside OS menus , a friend had his windows 10 falling into some boot loop and all i could think of was to unscrew the hard drive and work on it externally , is that the trend really or am i missing something ?

Answer:How to access/fix a non booting Windows 10 on a laptop with UEFI bios?

Originally Posted by nIGHTmAYOR


So basically back in the days a simple as F8 boots you to safe mode or F12 could bring up boot menu where you could boot from a flash drive or an optical disc , use a tool like hirens boot cd to undo the mess or just do a windows upgrade and you are good .

Now what's the new trend as UEFI bioses just lock you out from both bios and boot menus unless you legitimately pick those from inside OS menus , a friend had his windows 10 falling into some boot loop and all i could think of was to unscrew the hard drive and work on it externally , is that the trend really or am i missing something ?



It can be tricky getting to Bios if UEFI, particularly if fast boot is enabled.

There are several tricks to force getting to bios

1) See if bios has jumper settings you can change to make it boot to bios

2) Remove CMOS battery which often forces a jump to bios to reset date/time

3) Remove hard drive, and boot with a windows 10 installation flash drive or dvd inserted. As it will not detect hdd, it will boot from usb drive or dvd next, and using repair options, you can get to the bios via the repair menus. This is probably easiest to try first.

Once you get to bios, you can set boot order to boot from usb drive or dvd first. Then replace hdd and boot from flash drive or dvd. I always set the boot order to boot from flash drive first on any new pc, so I do not get caught.

1 more replies
Relevance 60.27%

OK, here's the deal... I've cloned the HDD onto an SSD, but I can't get it to boot.-- keep getting a notice to install the OS.  I know the clone is (should be) ok, because this is the SEVENTH SSD I've cloned over the past three weeks.  The only difference with this one is that it has the UEFI interface (with Windows 7 Pro 64-bit), and for some reason it won't recognize the OS on the SSD. The UEFI is set for: "Legacy Boot with Secure Boot disabled" (when booting either drive).The original drive is MBR.  I tried cloning the drive as MBR and GPT, but neither will boot.I tried cloning a different SSD to make sure it wasn't the SSD.I tried disabling the "UEFI Boot order"  (by unchecking it), but that didn't do anything. What I did notice was... When the original HDD is installed the UEFI BOOT MENU shows the drive in the list TWICE, once as UEFI (#2), and once as Legacy (#4) (with DVDRW as UEFI #1, and Legacy #3, then Boot from file as #5). HOWEVER, when the SSD is installed, the only option it gives me is UEFI.  If I DISABLE (uncheck the option) for the "UEFI Boot order", all it will show is the Legacy CDRW in the Boot Menu. I remembered having a similar problem with about a year ago on my own Windows 10 laptop having the same issue when installing a cloned SSD and then I was able to use the Windows Repair to fix it.  So I created a Windows 7 repair disk (CD), but it won't boot from the disk (it just comes to a blank screen--I've f... Read more

More replies
Relevance 60.27%

New Windows 7 install on a computer with only one hard drive. However, I now have another HDD with data on it that I need to plug into my SATA port on my motherboard. Once I plug this other hard drive into the motherboard I am no longer able to boot into windows. When it boots it now takes me to a black screen saying that it can not find the boot device. Once I unplug the new HDD it boots just fine. I'm assuming this has to do with my Windows 7 HDD being given a different ID from Disk 0 to Disk 1. an easy fix would be to change the order of where my Hard Drives are plugged into the SATA ports on the motherboard. The issue is that I can not do this because the Windows 7 Disk is a SATA III 6Gb/s so i need/want it to be installed on the SATA III 6Gb/s Ports and the 2nd Disk is a SATA III 3 Gb/s drive so I can't install it on the 6 Gb/s ports on the motherboard. On my Motherboard it seems to order the SATA III 3Gb/s drives first on the Drive order and the SATA III 6Gb/s at the end of the disk ordering. So, right now what I believe I need to do is Change my EFI/bootloader to point to the new Drive 1 location instead of the old Drive 0 location. Normally this isn't hard with MBR because you would just go to Boot.ini and change it there with no problem. However, I am unsure how to do that with EFI boot stuff and I have not found the specific solution to do this through searching the internet yet.

If changing the EFI to point to Disk 1 instead of Disk 0 is the answer. How would I g... Read more

Answer:Windows 7 UEFI/bootmanager stops booting after 2nd HDD installed

Have you tried booting into safe mode to see if you can get to windows or you could also try to select the proper boot selection before booting to windiows via boot media selector on my computer when i start computer i have to hit f8 repetedly until it ask me what device i want to boot. These are not solutions just something to try to see if windows will boot with other harddrive at all. Also did other hard drive have a copy of windows installed on it or was it purely a data drive

2 more replies
Relevance 59.45%

Hi people,
I have some problem with installation Windows 10 UEFI on Samsung 850 EVO SSD.
Actually I installed everything only my problem is because I could boot only if in BIOS is set option with Windows Boot Manager

P1 Windows Boot Manager Samsung 850 EVO
P1 Samsung 850 EVO

Before I had Windows 7 Installed on other SSD in Legacy Mode.
I want to install properly Windows 10 on Samsung 850 EVO without Windows Boot Manager.
Is it that possible in UEFI Mode?
My system is i7-5820K - Rampage V Extreme - Dominator Platinum DDR4 2666 CMD16GX4M4A2666C15

Is it possible to install new Windows 10 UEFI on Samsung 850 EVO and boot without Windows Boot Manager, I mean to install without that option in BIOS.

Answer:Windows 10 UEFI Installation Questions

Windows Boot Manager is the UEFI booting mode for Windows 10. Look at your disk management screen and you will see an EFI System Partition - that is UEFI and contains the Windows Boot Manager.

If your Windows 10 is installed and booting in legacy BIOS mode, in disk management you will see a System Reserved partition marked as active as the System Partition.

The example screenshot here:
Disk Management - How to Post a Screenshot of - Windows 10 Forums

shows a legacy BIOS setup, evidence by the first partition which is labeled as a System Reserved partition, marked as the active system partition.

This is a computer booting in UEFI:


because the second partition on Disk 0 is shown as an EFI system partition. Ignore Disk 1, even though it has an active partition it is for data only and does not boot the computer.

13 more replies
Relevance 59.45%

ok well this is a little complicated to explain so m gonna summarize it as much as possible.
i have a HP Sleekbook 15-B002xx which came with a windows 8 OS installed already. due to some reasons, i tried to shift it back to windows 7. After many unsuccessful tries, i finally managed to install windows 7 by changing my boot sequence to Legacy Boot.
later on, due to lack of drivers for win 7, i installed, rather upgraded to win 8 which was running on legacy boot (using MBR if im not wrong). now, i want to install a fresh copy of win 8 with UEFI but the problem is when i change my boot sequence to disable legacy boot, then during installation of win 8, i cannot see my HDD ... im using a flash drive to install win 8 which is already in UEFI (i used diskpart for that).
also, when i use legacy boot and try to install windows, then the HDD appears and when i format the HDD and create new partitions, it creates 3 partitions (System, MSR, Reserved) and the fourth one for OS. i tried installing the windows like this but after install, when i change the boot sequence to UEFI again, it fails to boot
now, i want to install windows to UEFI... and i really need help with this please ... i hope i have explained the scenario... if anyone would like to ask anything, please do ... as i really need to get this away... and also, i'd like to ask that how can i check if my HDD has been changed from MBR to GTP?
im not that much expert with this stuff so i hope i have used the terminologies ri... Read more

Answer:HDD not detected during Windows 8 installation in UEFI

Welcome to EightForums.








Originally Posted by mak712


change my boot sequence to disable legacy boot, then during installation of win 8, i cannot see my HDD ... im using a flash drive to install win 8 which is already in UEFI (i used diskpart for that).
also, when i use legacy boot and try to install windows, then the HDD appears and when i format the HDD and create new partitions, it creates 3 partitions (System, MSR, Reserved) and the fourth one for OS. i tried installing the windows like this but after install, when i change the boot sequence to UEFI again, it fails to boot



You are resetting the UEFI/BIOS firmware to UEFI boot & booting the DVD/USB in UEFI mode, than installing in UEFI mode, than after install you are resetting the UEFI/BIOS firmware to Legacy boot.

8 more replies
Relevance 59.45%

Hello,

A while ago my boss told me I needed a laptop, so I bought a nice second hand one, and bought a fresh new copy of Win7 SP1. It always worked fine, until the laptop died.
My boss bought me a nice new laptop, but we found out that some programs don't run well on Win10. We also have an outdated server setup, and Win10 seems to have some problems with it.

So we decided that I need to go back to Win7 64bit. And I decided to start reading up on that UEFI thing. I double checked that my Acer E5-721 has UEFI activated.

Via the tutorials on this forum I found out that I need a UEFI compatible ISO from Windows. The one I have is not. Apparantly I need BOOTx64.EFI in the EFI folder. Which I don't have.

So I unpacked the ISO, and unpacked INSTALL.WIM to find the BOOTMFGR.EFI file, and copied it to the EFI folder. I then used IMGBURN to turn it all back into an ISO and Rufuc to create me a bootable USB.

But it just don't work. I don't get the Win7 install screen. The laptop either goes to Win10 or gives me a screen that says: "Windows failed to start. A recent hardware or software change might be the cause. Status: 0xc000000f."

I also tried to put the required EFI files into the BOOT folder (seeing as some tutorial I found via Google suggested it). But nothing seems to work.

Can somebody help me to fix this??

I've read:
UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with
Clean Install Windows 7
UEFI boot from Windows 7 Instal... Read more

More replies
Relevance 59.45%

Hello I have problem installing windows 7 on my X250 laptop. I am using crucial mx200 because of Opal 2 enycrypiton.I have  disabled Secure boot, enabled UEFI only boot. But when i am installing Windows 7 from USB key i get error: \EFI\Microsoft\Boot\BCD an error occurred while attempting to read the boot configuration data.and the status 0xc000000d Usb was created with rufus tool, i have even try with creating manualy (http://www.eightforums.com/tutorials/15458-uefi-bootable-usb-flash-drive-create-windows.html If I boot of usb cd-rom instalation stops at starting windows(the first starting windows not the one after you select disk and all that stuff). anyone has a solution maybe?

Answer:X250 Uefi windows 7 Installation

I have had better luck setting boot to be "UEFI first" and turning off secure boot for the install.  Set them back they way you want them after installing.

9 more replies
Relevance 59.45%

Hi people,
I have some problem with installation Windows 10 UEFI on Samsung 850 EVO SSD.
Actually I installed everything only my problem is because I could boot only if in BIOS is set option with Windows Boot Manager

P1 Windows Boot Manager Samsung 850 EVO
P1 Samsung 850 EVO

Before I had Windows 7 Installed on other SSD in Legacy Mode.
I want to install properly Windows 10 on Samsung 850 EVO without Windows Boot Manager.
Is it that possible in UEFI Mode?
My system is i7-5820K - Rampage V Extreme - Dominator Platinum DDR4 2666 CMD16GX4M4A2666C15

Is it possible to install new Windows 10 UEFI on Samsung 850 EVO and boot without Windows Boot Manager, I mean to install without that option in BIOS.

Answer:Windows 10 UEFI Installation Questions

Windows Boot Manager is the UEFI booting mode for Windows 10. Look at your disk management screen and you will see an EFI System Partition - that is UEFI and contains the Windows Boot Manager.

If your Windows 10 is installed and booting in legacy BIOS mode, in disk management you will see a System Reserved partition marked as active as the System Partition.

The example screenshot here:
Disk Management - How to Post a Screenshot of - Windows 10 Forums

shows a legacy BIOS setup, evidence by the first partition which is labeled as a System Reserved partition, marked as the active system partition.

This is a computer booting in UEFI:


because the second partition on Disk 0 is shown as an EFI system partition. Ignore Disk 1, even though it has an active partition it is for data only and does not boot the computer.

1 more replies
Relevance 59.45%

Hey all,

I bought a new Toshiba L70-BST2NX1 laptop and I am trying to install Windows 7 (Home Premium 64-bit) on it using UEFI method, not dual boot with Windows 8.1, just Windows 7 all by itself. I got stuck early in the installation process.

Here is what I did: Disabled Secure Boot in UEFI setup
Removed all partitions from HDD
Began booting from Windows 7 DVD while UEFI is enabled

Having done that, on the screen I see "loading files" text and a white horizontal progress bar. Then the animated Windows startup logo appears with "Starting Windows" text, but then it freezes in the middle of the logo animation. This is where I am stuck.

I certainly want help getting me through the installation but I also have a number of questions. Does Windows 7 normally support this type of UEFI installation?
If UEFI booting is disabled (CSM) on UEFI-capable machine, what functionality do I give up?
If Windows 7 installation is performed with UEFI boot disabled (CSM), can UEFI booting be enabled again after the installation process is finished?

These are the instructions that Toshiba has, and they say to use CSM booting, but does that mean that UEFI Windows 7 is impossible on UEFI-capable Toshiba machines?
https://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm

Answer:Windows 7 installation on Toshiba UEFI

Try following these directions: UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with

9 more replies
Relevance 59.45%

Hello!

I have my laptop since last december (less than a year), and for unknown reasons, I got a BSOD a few weeks ago and none of the available recovery tools managed to bring me back to my desktop; not even a refresh. That's when I promised myself that I would never ever again install a Microsoft OS, and went for Ubuntu 16.04 (which was already there on another partition). Now I'm realizing that I need some softwares that work best on Windows and not through a VM (eventhough I already have Windows 10 running in VM for Microsoft Office).

So here's my issue:

I created my bootable Windows 10 installation USB but I can't boot from it! I doesn't even show as an option. Ubuntu does. I tried a USB 3.0, 2.0, UEFI, Legacy, MBR, GPT... Nothing seems to work. Searched forums for hours and couldn't find a solution.

Now for grub to be able to launch at startup, I had to add an efi file to the trusted uefi file list in the BIOS. I was wondering if such a file should be added to be able to boot from my USB... (secure boot is disabled).

I want to keep my Ubuntu and Kali...

I've attached a screenshot of my ssd partitions.

Any idea?

More replies
Relevance 59.45%

Hello!

I have my laptop since last december (less than a year), and for unknown reasons, I got a BSOD a few weeks ago and none of the available recovery tools managed to bring me back to my desktop; not even a refresh. That's when I promised myself that I would never ever again install a Microsoft OS, and went for Ubuntu 16.04 (which was already there on another partition). Now I'm realizing that I need some softwares that work best on Windows and not through a VM (eventhough I already have Windows 10 running in VM for Microsoft Office).

So here's my issue:

I created my bootable Windows 10 installation USB but I can't boot from it! I doesn't even show as an option. Ubuntu does. I tried a USB 3.0, 2.0, UEFI, Legacy, MBR, GPT... Nothing seems to work. Searched forums for hours and couldn't find a solution.

Now for grub to be able to launch at startup, I had to add an efi file to the trusted uefi file list in the BIOS. I was wondering if such a file should be added to be able to boot from my USB... (secure boot is disabled).

I want to keep my Ubuntu and Kali...

I've attached a screenshot of my ssd partitions.

Any idea?

Answer:Can't boot Windows 10 installation from USB - UEFI

How did you make the Windows 10 USB flash drive? It needs to be formatted as FAT32 and the partition on it marked as active to be compatible with both UEFI and legacy BIOS (or CSM). Once it is formatted as FAT32 and the partition marked as active, then you just copy the files and folders from the mounted Windows 10 ISO over to it.

5 more replies
Relevance 59.45%

Hi,

I've build a custom installation of WINDOWS 7 Ultimate x64 SP1.
My installation is about 8,3GB and I had to burn it to a DVD Double Layer.
I want to install it to a UEFI system.

I went to BIOS and in the UEFI menu I see the Drive of DVD with the EUFI enabled, but when select this drive to start is begins to start Windows normally.

If I select to start the install from normal option it start to install withou UEFI.

I have burn the iso to a USB PEN and if select the the UEFI option It shows the option from starting the UEFI boot.

I have tried this in three diferent computers and is equal in all.

If I begin a installation with a DVD in UEFI mode it start OK.

IS this a DVD DL problem that cannot start in UEFI?

Answer:Windows 7 Ultimate SP1 UEFI Installation with DVD DL

Are you following the steps for UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums?

If the unnecessary All-in-one DVD doesn't work correctly then download the ISO for the license you own and burn to DVD from Steps 1 and 2 of Clean Reinstall - Factory OEM Windows 7

To use flash stick also needs special steps for UEFI Bootable USB Flash Drive - Create in Windows.

If UEFI doesn't work for you then you can always Bypass UEFI to Install WIn7

9 more replies
Relevance 59.45%

As you can see from my topic subject, my W520 laptop won't boot from my Windows 7 Installation DVD when it is set to UEFI-only mode. I don't get any errors or anything, the screen just goes black for a second and returns to the Boot Menu, when I select the DVD drive. For what it's worth, my hard drive is already GPT partitioned, and I need to repair the installation. Before I ask for help, I just want to mention that I created this particular Windows 7 Installation DVD using the All-in-One tutorial so that I could have 32-bit and 64-bit options all on the same disc. The disc booted fine in "Legacy/UEFI" boot mode, so I'm not sure what the problem is. Does anyone have insight into this? EDIT: I've been following this tutorial: http://www.insanelymac.com/forum/index.php?showtopic=186440 and am at Step 14.





ThinkPads and SSDs: Part 1 Part 2 Part 3









Solved!

Go to Solution.

Answer:UEFI-only Won't Boot Windows Installation DVD

I heard that UEFI-only boot is supported by the Windows 7 SP1 installation media but not the RTM one.

9 more replies
Relevance 59.45%

ok well this is a little complicated to explain so m gonna summarize it as much as possible.

i have a HP Sleekbook 15-B002xx which came with a windows 8 OS installed already. due to some reasons, i tried to shift it back to windows 7. After many unsuccessful tries, i finally managed to install windows 7 by changing my boot sequence to Legacy Boot.
later on, due to lack of drivers for win 7, i installed, rather upgraded to win 8 which was running on legacy boot (using MBR if im not wrong). now, i want to install a fresh copy of win 8 with UEFI but the problem is when i change my boot sequence to disable
legacy boot, then during installation of win 8, i cannot see my HDD :(... im using a flash drive to install win 8 which is already in UEFI (i used diskpart for that).
also, when i use legacy boot and try to install windows, then the HDD appears and when i format the HDD and create new partitions, it creates 3 partitions (System, MSR, Reserved) and the fourth one for OS. i tried installing the windows like this but after
install, when i change the boot sequence to UEFI again, it fails to boot :(

now, i want to install windows to UEFI... and i really need help with this please :(... i hope i have explained the scenario... if anyone would like to ask anything, please do :(... as i really need to get this away... and also, i'd like to ask that how can
i check if my HDD has been changed from MBR to GTP?

im not that much expert with this stuff so i hope i have used t... Read more

Answer:HDD not detected during Windows 8 installation in UEFI

You can't see the HDD, because your HDD is MBR style when you installed Win7 in legacy mode. But when using
UEFI you must use a GPT style disk.

At the beginning of the setup press SHIFT+F10 to open the command prompt. Run DISKPART, select the DISK and delete all partitions on it. Exit DISKPART, close the CMD and continue the Setup. Now you should see it."A programmer is just a tool which converts caffeine into code"

6 more replies
Relevance 59.45%

I was reading about a build where a guy was getting 9 second boot times with a Z97 and Plextor M6e. He said he had to do a Windows GPT ( UEFI ) installation... What is that and how do I do one?
 

Answer:Can someone explain Windows GPT ( UEFI ) installation?

You need your motherboard set for UEFI boot. You need your SSD set as a GPT drive (not MBR), and I don't think this can be done during the installation of Windows, the drive would need to be formatted as GPT previously. I don't think there is any way of converting a MBR drive to GPT either without destroying the data. Installation needs to be done from either a disc or a FAT32 drive with the necessary UEFI files, should be included automatically with Windows 8. You need a GOP-compatible GPU. And you need Windows 8/8.1.

Your sig system should be completely UEFI fast boot compliant. If your SSD is already set up as a GPT drive, and you're running Windows 8/8.1, all you would need to do is go into your bios, set UEFI as your only boot method (no legacy), and enable GOP UEFI Fast Boot (or something termed similar to that). This will by default enable SecureBoot as well, which would be problematic if you dual boot.
 

14 more replies
Relevance 59.04%

Hi guys.

Thanks for looking at this thread.

I have a few questions about dual booting windows 7 and windows 8 preinstalled (UEFI) on my Dell laptop.

1. Can I install a non-UEFI version of Windows 7 on my laptop, if so how?
2. Will installing a non-UEFI version of Windows 7 on my laptop break it?
3. Can I use EasyBCD for UEFI?
4. How do I create a UEFI windows 7?

Thank you

Answer:Dual Booting Windows 7 with Windows 8 Pre-Installed UEFI

Really no point in dual booting since they are essentially the same OS like 7 to Vista.

Choose one and stick with it, Windows 7 will be supported till 2017 (mainstream) and 2020 (security).

3 more replies
Relevance 59.04%

I?m trying to install window 7 on TOSHIBA Satellite M50D-A-10L with UEFI boot.

First time, I used EFI installation with CSM Boot and it worked fine.

But after I tried switch to UEFI and do UEFI installation, every time it start loading installation files and after that windows freez on "Starting Windows" screen.

I've got two peaces of these ultrabooks and they do the same.

I used Flash disk, USB CD-ROM, two different versions of windows 7, but it have same ending...

Secure Boot is disabled

Answer:Satellite M50D-A-10L - Windows 7 UEFI installation

I?ve got a Satellite M50-A model (its similar to the M50D-A but it was equipped with nVidia GPU instead of ATI GPU) and could install the Win 7 switching the boot mode to CSM mode.

Generally speaking the UEFI boot mode can be used only for UEFI capable system like Win 8 or Win 8.1 and some Linux distributions.
Win 7 isn?t UEFI capable system.

However, there are different workarounds to install Win 7 64bit (not 32bit) in UEFI using the GUID ? partitionstable (GPT). Only Win 7 64bit contains the UEFI boot loader.

But very important fact is that UEFI installation isn?t available (by default) booting from USB memory stick due to missing uefi boot loader! In case you use the USB memory stick for installation, you have to add the UEFI boot menu? (search in google for more details).

Last but not least everything depends on BIOS support? in case the BIOS would allow the installation only in CSM mode; all these workarounds would be useless.

1 more replies
Relevance 59.04%

Hello all, I didn't really know where to post this besides here. I currently plan on doing a clean install on a new ssd of Windows 10. My current mobo is a ASUS P8z68-V which has UEFI so I plan on doing a UEFI installation of Windows 10. However, I plan on getting a new processor and motherboard sometime in the future, so would I have to do a reinstall of Windows 10 when I get my new motherboard, or could I expect it to boot up normally as would a traditional BIOS system would work? Thanks for reading!

Answer:Switching motherboards with Windows 10 UEFI installation

Some backup software is geared toward restoring an image on different hardware. You may get by without it, but know that it's there. I never did this, however, and I would still worry about the differences between hardware.

4 more replies
Relevance 59.04%

Hello !
The EFI partition contents is related with a specific windows installations or with PC's UEFI ?
For example :
Let's have 2 PC :
- Different hardware
- GPT (Different / or Same ) Partition scheme
- Same version and editions of Windows 8.1

What can we say about EFI partition contents on these 2 PC ?
Thank you !

Answer:Efi partition is related to windows installation or UEFI

The EFI partition is the System Boot Files Partition (ie System partition)

GPT is a different partition format (allows more then 4 primary partitions, MBR only 4 primary partitions)

Very limited X86 support for GPT partitions and UEFI - system depending

1 more replies
Relevance 59.04%

I have Asus UEFI motherboard with 2TB hard drive. By following tutorial on this forum I created UEFI bootable USB.

In this tutorial UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with I found that requirements is "A blank, partition-free, hard disk".

My drive has 2 partitions C and D. I want to install windows on C and preserve files on D. Could I do this? Why do we need to have partition free disk?

Answer:How to preserve partition when using UEFI for Windows 7 installation?

  
Quote: Originally Posted by SpecialOne


I have Asus UEFI motherboard with 2TB hard drive. By following tutorial on this forum I created UEFI bootable USB.

In this tutorial UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with I found that requirements is "A blank, partition-free, hard disk".

My drive has 2 partitions C and D. I want to install windows on C and preserve files on D. Could I do this? Why do we need to have partition free disk?


There is no problem at all in making two partitions before you install Windows. Just be sure and make what will be your C: big enough to hold Windows (30 GB) and any other programs that you will put on it. You can then put all of your Documents, Pictures etc on the D: drive. This is the preferred way to set it up. == This will help you with the install Clean Install Windows 7

1 more replies
Relevance 59.04%

Hi im having some issues installing a win seven x64 version onuefi mode. I create a usb gpt and i set everything on uefi in the bios and i can see correcly the raid volume active.ok
I begin the windows instalation and when it cames the part to chosse the partition to install there is empty twher any harddrive to select.
I delete and create a new raid cero volume an still nothing.
Help please

Answer:windows seve x64 uefi installation issue

Why are you using RAID which greatly complicates things and offers no advantages since Win7 doesn't like it?

Did you create the UEFI installation media using only Option One from UEFI Bootable USB Flash Drive - Create in Windows ?

Then did you boot the stick as a UEFI device only, delete all partitions during the booted install so that the installer can reformat the hard drive as GPT? UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with

4 more replies
Relevance 59.04%

Hi guys,

I recently bought a new SSHD for my laptop and after initial problems with trying to install Windows in UEFI, I turned to Legacy and that worked. But now when I change it to UEFI, it just comes up as "Operating system not found".

Any ideas or solutions would be greatly appreciated, thanks.

Answer:Windows 8.1 clean installation; won't boot in UEFI?

You may have to reinstall so you will have the UEFI configuration. But what about the original install gave you problems with UEFI, were you able to boot into the UEFI version of the install media?

1 more replies
Relevance 59.04%

Hello all. My first post on these forums. Hope I don't break any rules in it
I'll try to be short and clear in describing my problem, but please bare with me here as it's not the simplest of issues (not to me anyway).
I got a (at the time new) MSi laptop several months back with just a regular Windows 8 Core x64 on it and a UEFI boot system (or whatever is the name for "BIOSs"). At some point I had problems with the settings - I couldn't open any of my computer's settings - and I researched long and hard to no avail. So I installed Windows 7 32-bit (the only disk I had). Now, I'm trying to upgrade to Windows 8.1 Pro. I noticed that after the installation of 8.1 Pro my system was still running in 32-bit, so I made a bootable USB stick with the retail version of Windows 8 Core with no key just to get the system back to x64. It worked just fine. I cannot, however, boot in UEFI mode. I believe the partition got wiped somewhere in the Windows 7 installation. Whenever I enter UEFI by pressing the DEL button (I cannot see the UEFI firmware settings tile under the Troubleshoot option) I see the boot mode is LEGACY and when I change it to UEFI, save and reset, it doesn't boot, giving me a "No media found" error. I don't care about my settings/files as long as I get UEFI back with Windows 8.1 Pro running.
I googled long enough to know I'm not going anywhere if I don't ask someone with expertise on this matter.
My next attempt would be to try and install 8.1 Pro fro... Read more

Answer:UEFI Partition Wiped After Windows 7 Installation

Yes that is correct, when you load a different OS on the hard drive. All previous partitions are wiped off of the hard drive. Only way to get it back, is to reinstall Windows 8.x.x.

6 more replies
Relevance 59.04%

I own a family 3-pack of Win7 Home Premium. I have installed this OS 6 or 7 times using the 3-pack product key (only 3 PCs ever have it running - old PCs get retired and new PCs get a clean install).

Activation has always gone as expected. The first 3 times were very easy over the internet. The next few times it required a call.

The last 2 installations were made on new systems with UEFI BIOS. I installed using an EFI ready USB stick and in UEFI mode at boot.

The Activation on these two installs was convoluted.

First, trying to activate over the internet returns an error message that basically says I can't use upgrade media to do a clean install. (This message has never appeared before that I recall).

Then, once that method has failed I do not get any option to use telephone activation. I have to type in option 4 in a slui.exe run to get the phone number.

Normal telephone activation does not go as usual. The installation string does not work (as normal), but I eventually get to the operator. But the operator cannot generate a validation key as usually happens.

The operator then checks to see if my product key is valid (it is), then sends me off to an Activation Technician.

The tech then needs to take remote control of my desktop. He tries everything I have already done (same results), then tries typing in an override code (that fails), then after some time finally comes back and types in a new Activation Key in the nine boxes. It takes a restart, and a new override ... Read more

Answer:Does a UEFI Installation affect Windows Activation?

This is perfectly normal
The Family Pack Keys are UPGRADES - and theoretically require a pre-existing installation of an activated Windows before allowing the install.
In fact, Windows will allow an installation without the prior one - BUT there is a tag which tells the Activation request that the machine was Clean-installed. This in combination with the Upgrade Key is what leads to the failure to activate.

There are at least three workarounds to this - the ONLY one which MS support is the double-install method.

Clean Install Windows 7 with Upgrade Media | Windows 7 content from Paul Thurrott's SuperSite for Windows

2 more replies
Relevance 59.04%

So, what is that basically ? When i boot from my usb stick, i have the option to install in UEFI mode and in normal mode.

I know in UEFI mode it makes 4 partitions, and in normal mode just 2 partitions.

So basically if i install in UEFI mode i will have better windows 8 implementation and it will boot and post and run faster ?

What are the advantages for installing in UEFI mode vs normal mode ?

And why in UEFI mode the OS creates 3 additional partitions, instead of only one ?

Answer:Windows 8 install in UEFI mode

For more info on uEFI:
Windows and GPT FAQ
Unified Extensible Firmware Interface - Wikipedia, the free encyclopedia
UEFI and Windows
Technical Note: UEFI BIOS vs. Legacy BIOS, Advantech(EN) - YouTube
Sample: Configure UEFI/GPT-Based Hard Drive Partitions by Using Windows PE and DiskPart

Lenovo uEFI Windows 7.
Lenovo UEFI Demo Clip.wmv - YouTube

7 more replies
Relevance 59.04%

Hello, I recently bought a Lenovo X1 Carbon and, after an brief excursion into Windows 8, decided to install a clean Windows 7 on the computer. I had successfully installed Windows 8 in UEFI BIOS mode without CSM compatibility (and secure boot). Today, I have tried to install Windows 7 with UEFI BIOS mode without CSM compatibility and without secure boot. When I tried to load the Windows 7 (SP1 slipstreamed) setup from a bootable FAT32 USB stick, the "grey bar" initialisation worked fine (i.e. the data is read), but the setup hung on "starting windows" (tried 3 times); I tried one of the safe modes and the system stops reporting loaded system files at "classpnp.sys". I then went back to the BIOS and enabled CSM compatibility (still UEFI only). With this setting, I couId install Windows 7 without any problems, and I installed it onto a GPT partition. After the installation I installed all drivers and Windows 7 updates on offer and also updated the X1 Carbon drivers through Lenovo System Update. Then I tried to disable CSM and reboot, which again resulted in the system getting stuck at "Starting Windows" like during the installation attempt. Have any of you successfully installed Windows 7 with UEFI only and without CSM enabled? Are there any "tricks" that can be applied to get this to work? N.B. the only benefit that I expect from getting this to work is the "nicer looking" UEFI "BIOS" screen. BIOS version is 2.03. Any suggestions appreciated.

... Read more

Answer:X1C Windows 7 UEFI install without CSM mode possible?

If you have the virtualization directed I/O setting enabled in the BIOS settings, disable it.  That seems to be one of the culprits I keep reading about.

5 more replies
Relevance 59.04%

During my work I have previously successfully deployed PC's with several Computers with UEFI Booting with GPT partitioning for a while now - due to its advantages ( I understand UEFI supports 2TB+ drives and is quicker to boot ) , this UEFI booting was also influenced by being supplied with more modern motherboards which do not natively recognise MBR partitionsIt seems the general concensous is that UEFI is a technology that only supports x64 Operating systems , is this correct?We are being suplied with Netbooks which have 32GB SSD's and I would rather install X32/86 Windows to save a Few GB . I have created a Dual X32/x64 Win 10 Image with UEFI boot and GPT partitioning , however this throws an EFI error when I run the 32 bit install but runs fine on X64 ( Using Rufus ) I also tried creating and running a MBR with CSM for UEFI but Windows does not recognise the SSD I spoke to ASUS , they rekon their netbooks support 32Bit UEFI Win 10 OS , so am a bit lost This is an Asus E402MA-WX0055T

Answer:Does WIndows 10 support 32 Bit UEFI mode ?

http://answers.microsoft.com/en-us/...

5 more replies
Relevance 59.04%

I am wondering if I can install windows 10 creator's update on my new hp laptop, I have it on usb, in uefi mode. The reason I ask is that my older laptop, also an hp did not allow me to install via eufi, but in legacy only. I think it has something to do with oem windows baked in to the bios.

Henry.

More replies
Relevance 59.04%

Hello,

I am using Windows 8 since release now but just figured out it was never installed in UEFI mode. So I wanted to reinstall it. The first problem I had was I couldnt boot from my DVD I burned the iso file on the Windows 8 setup too created for me, there is no UEFI boot option available.

Then I created a copy of all files on a 8gb SD card, used bootsect /nt60 x:, again, no UEFI boot option available. My last try was, because I have no USB pen, creating a fat32 partition on one of my usb hdds, again copied all files on it, did a bootsect /nt60 x:, and now I was able to chose UEFI: ... from the boot menu.

So I booted from it, but then it gave me this error screen, and I don't know why, or what to do now anymore. Any help would be really appreciated.

Answer:Can't install Windows 8 in UEFI mode

Open command prompt in Repair my Computer



Startup Options Menu Shortcut - Create in Windows 8

Type diskpart
LIST DISK
SELECT DISK # ( HD Drive for Windows 8)
CLEAN
convent gpt
exit


Make the first partition in Drive Options


To boot your DVD, use boot menu



press enter on the UEFI DVD drive




UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with

1 more replies
Relevance 59.04%

HiI have a Pavilion P210-ne NotebookI have updated my bios to latest version I disabled Legacy mode And use an Uefi bootable usb That Created by Refuse and using standard windows 10 iso (Uefi version)Also i tried with a bootable Windows dvd(with uefi file) But in both way After turning on my notebook i just see black screen with this message (boot device not found) I Tested my usb and dvd withe another notebook from asus and its work correctly 

Answer:I cant install windows 10 in uefi mode

1001fboy When you install in UEFI mode, the installer expects to see a drive that has been formatted in GPT mode, not MBR. So, you need to confirm that your drive is formatted in GPT mode. You probably also need to disable Secure Boot in the UEFI menu. Good Luck========================================================================I am a volunteer and I do not work for, nor do I represent, HP.---------------------------------------------------------------If my posts helped you, please click the Thumbs-Up symbol on my post to say thanks.If my posts solved your problem please click "Accept As Solution".======================================================================== 

1 more replies
Relevance 59.04%

Hey guys, I've never seen a full guide to installing Windows 7 in UEFI mode before anywhere, trust me I've looked. But I managed to pull it off a few days ago. So I thought I'd share it with you guys

What you'll need:
A Windows 7 64 bit ISO (doesn't matter what edition and can be an All in One disk.)
Virtual Clone Drive (To Extract ISO Contents)
8GB+ USB Stick
A UEFI BIOS
7-Zip
A Computer already running Windows

Steps:
1) Install Virtual Clone Drive Link Here and also install 7 zip Link here

2) Make a flat copy of your windows 7 x64 ISO, which mean just extract the contents of the ISO into a folder. First you'll want to mount the Disk Image, by right clicking and mount to Drive E: for example.
Mounting Image Example

Next open the disk drive you mounted it to, and copy the contents to a place you'll remember. (This will take a while)
When it's done it should look something like this

3) Format your USB Stick.
Just go to computer, right click it and press format. Make sure you change file system to FAT32. This is so you can boot from it.
Settings for formatting

4) Now here's the hard part. Preparing the flat copy for UEFI.

Go to the EFI folder, make a new folder in there called "boot".
Now go into the "Microsoft" folder which is in the EFI foler. Then boot, and copy the contents.
What it should look like
Put that into your boot folder you just made.

Now that's done. Go to the Sources folder which is in the root Here!
Scroll down to boot.wim, and ... Read more

Answer:How to install Windows 7 in UEFI Mode with a USB

Hello immersive, and welcome to Seven Forums.

This may be a bit easier to follow instead.

UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with

5 more replies
Relevance 59.04%

Hi,  I try to install Windows 7 on my T440s. However, I fail booting the USB stick with error code 0xc000000d ("An error occurred while attempting to read the boot configuration data"). I created the USB stick as described in the Forum here (http://forums.lenovo.com/t5/Windows-7-Knowledge-Base/Prepare-an-usb-thumb-drive-to-boot-windows-7-in...). Also, the USB-Stick boots fine in UEFI mode on my old (HP) Laptop. Also I can boot on CSM-Mode Compatibility Support Module. I tried several other how-tos and what else Google answered search fo that error code (e.g. disabling USB3, disable nearly everything the UEFI BIOS could disable etc...). It really seems to be an issue in conjunction with that UEFI implementation... I'm using latest UEFI BIOS (GJET64WW, 2.14). Anyone successfully installed Windows 7 on that model? Any help would be appriciated. Best regards,falstaff













Solved!

Go to Solution.

Answer:T440s & Windows 7 in UEFI mode

Hi falstaff_ch, and welcome to the Lenovo User Community!
 
You might want to check this post.

4 more replies
Relevance 59.04%

My motherboard supports booting in UEFI mode. Does anyone here know how to install Windows 7 x64 in UEFI mode? It keeps booting into legacy BIOS mode and I have no idea how to get into the UEFI shell to choose the UEFI boot option so I can install in a native UEFI environment.

Please help!
 

Answer:Installing Windows 7 x64 in UEFI mode?

What motherboard? Does it support UEFI 2.0?
 

12 more replies
Relevance 58.22%

Hi there,
I wanted to boot an existing Windows 10 install taken from a UEFI notebook into an older non-UEFI notebook and I only get a flashing cursor. Booted with an installation media and the automatic startup repair did not work.
Browsing online I tried re-creating the boot sector but in the end I understand that to do so I need to attempt the fix from a UEFI system.

I perfectly understand that a Windows installation should not be moved to a different system but I was hoping to manage to boot it up to save some files. Alternatively, I can plug the HDD into another PC.

Is there anybody aware of a way to make this installation work?
Thanks
Tony

Answer:UEFI installation on non-UEFI system

The main problem is that you will have to convert the drive from GPT style partitioning to MBR partitioning so that you can mark a partition as active to be able to boot from it in legacy BIOS. The easiest way to do that is to create an image of your Windows and any data partitions using a program like Macrium Reflect Free, then convert the drive to MBR, then restore the partitions back and create your boot files required to boot in legacy mode.

Alternatively, you can copy the partitions to a second HDD/SSD partitioned as MBR, create the boot files on it, and then install that in the legacy BIOS computer.

8 more replies
Relevance 58.22%

Is it advisable to set the UEFI BIOS (Asus ROG Hero Maximus VI motherboard) to a factory default settings before installing Windows 10? Or should I at least set the memory "XMP" profile?

Thanks!

Answer:UEFI BIOS settings to prepare for Windows 10 Installation

Hello Greg,

The only UEFI firmware settings that I would recommend to temporarily change until Windows 10 installation is complete is:

Disable Fast Boot to make it easier to be able to boot from a USB. When Fast Boot is enabled, you don't have time to be able to press the Boot Menu key to select to boot from a USB.

Disable Secure Boot. Some motherboards do not support booting from a USB while secure boot is enabled.

3 more replies
Relevance 58.22%

Hi

I have a laptop with windows 8.1 pro x64 but i never was comfortable with windows 8.1 or 8. I am more comfortable with windows 7 but the problem is that this is a UEFI laptop with secure boot enabled and obviously partitions must be GPT (not sure).

I deleted all the partitions by taking out the drive from machine, attaching it with my desktop system (windows XP) and used EaseUS partition manager to delete all the partition table and made simple partition style of 1 primary and 3 extended logical drives. (It also deleted the recovery and system reserved partitions).
My C drive is 50GB now.
For installing windows 7, i did some settings in BIOS:

Secure boot - disabled
boot type - legacy boot type (other options are UEFI boot type and dual boot type)
Intel rapid start - disabled
Intel rapid storage - disabled
Intel anti-theft - disabled
AHCI type - SATA (other option is RAID)

However my question is something else. If i want to install windows 7 in UEFI mode, i know i have to use RUFUS to make it UEFI bootable and install it. BUT i want to know something:

1. For installing Windows 7 in UEFI, DO THE PARTITIONS need to be in GPT mode?

Because as far i THINK now that i made partitions again so it must be in BIOS mode and not the GPT mode. Am i right?

2. Installing OS still, WITHOUT UEFI (disabled UEFI boot from BIOS) and partitions in BIOS mode, will the OS windows 7 function normal or not?

Answer:Windows 7 installation on UEFI computer, URGENT help needed.

1 Yes,they have to be GPT.Otherwise,you may render your system unbootable in UEFI mode.

2.Windows 7 will function normally,but you won't get the advantages UEFI has. If you want them,boot from the USB in UEFI mode,set Boot Mode in UEFI and install Windows 7 normally.

If you encounter any problem,let us know as soon as possible.

9 more replies
Relevance 58.22%

Machine: IdeaPad N581 with latest BIOS/UEFI (v9.01). OS: Windows Hello!  I'm trying to install Windows 7 Pro (64 bit) on my machine, which is currently running Windows 8.1. I want a clean install, i. e. wipe out the whole HDD (partition and format). Booting from DVD, the installation fails after the setup DVD has been loaded and the display says "Windows is starting" (the installation). There's a short graphical glitch an then a frozen display with the loading screen.  When I switch from UEFI to legacy BIOS, the installation starts as normal. But I want Win 7 to run on UEFI.  Is it possible, that the latest UEFI version does not support Windows 7? I had Windows 7 on UEFI before I made an BIOS update one year ago.  I made several DVDs to check, whether it's a faulty disc. My questions:  1) Where can I get an older BIOS/UEFI version for my machine (download archives?)?2) What else might keep Windows 7 from being installed under UEFI?

Answer:Windows 7 installation fails after UEFI/BIOS update

Hello and welcome,
 
Try enabling CSM support in BIOS.  Should be somewhere near the UEFI/legacy option if it's available.  Win 7 won't run in UEFI mode without CSM.
 
Z.

6 more replies
Relevance 58.22%

Hi, I have Yoga 13 (i7, 8gb RAM, 256gb SSD) with Windows 8 preinstalled. Few days a go my whole SSD was accidentally formatted after messing with Android for PC file (android-4.2.2_r1-ia3). Now there`s no partitions SSD, neither Recovery hidden partitions!!! I have`t done Recovery System Image on DVD or USB flash. All I have is some en_windows_8_x64_dvd_915440.iso from internet, but this Windows 8 installation already have license key (something like xxxxx-xxxxx-xxxxx-xxxxx-and five more characters) which is wrong, and now I CANNOT ACTIVATE MY WINDOWS 8 because I don't now right LICENSE KEY which is in UEFI. PLEASE, WHAT CAN I DO NOW? HOW TO ACTIVATE WINDOWS 8 WITH UEFI key? I can uninstall this wrong Windows 8 key, but after that nothing`s happened. Also, I can update to Windows 8.1 through Store, but the same situations is. Thanks













Solved!

Go to Solution.

Answer:How to activate fresh WINDOWS 8 installation WITH UEFI KEY on YOGA 13

It activates automatically. No need to worry.In case it doesn't, open command prompt and type:slmgr -ato You can get the product key from the BIOS/UEFI using RWEverything by reading ACPI/MSDM tableThen in command prompt: slmgr -ipk #####-#####-#####-#####-#####slmgr -ato

2 more replies
Relevance 58.22%

greetings,

I'm struggling to install windows 8 in UEFI mode on my asus p8z77-v lk motherboard.

I updated the BIOS to the latest version, that is 0908.

I have this USB stick that was created with that Windows 8 USB tool, it has the Windows 8 installer.

I can't seem to boot into the USB stick in UEFI mode.

Do I have to disable CSM (compatibility support module)?

I'm trying to google this but it is just confusing me even more..........

Did the USB have to be created in UEFI mode? :|
Does the BIOS of my videocard have to support UEFI to install Windows 8 in UEFI mode?

Thx
 

Answer:installing windows 8 in UEFI mode on p8z77

I do not have an answer for you but I can share my experience.

UEFI via USB did not work for me in Consumer Preview (using microsfot win7 iso to usb).

It DID work with the $40 upgrade using windows upgrade assistant to make USB stick.

My ASUS boards use UEFI perfectly. Gigabyte tends suck at UEFI implementation. On my p67a-ud7-b3 I had to disable the gsata (gigabyte sata) to get UEFI to work properly.

I can suggestion 3 things.
1. Burn an ISO to DVD and try UEFI install that way.

2. Make sure your board is properly booting UEFI, try a ubuntu or redhat disk just to see if it boots UEFI.

3. Check to see if you have something like gsata enabled that could be disabling UEFI boot.
 

2 more replies
Relevance 58.22%

Hello Guys,

recently i purchased a new laptop that came with win10.

The laptop is Lenovo z50-70

Unfortunately my brother managed to download so many viruses, that I decided to do clean Win 10 install. I had no important data on the laptop and I thought it would be the easiest solution.

So I inserted Win 10 dvd that I got with the laptop into the drive and went on with the process. Decided to not keep any data, formatted the drive, and when I needed to choose where I want windows installed, it told me it cannot be installed on GPT Style partition, which I found weird, because Windows was installed there before.

The partitions look currently like this:

https://i.imgur.com/SqMbqdo.jpg

So I did some reading and found out that I should boot in UEFI mode so that I can use the GPT style partition, however when I wanted to boot from DVD using the UEFI, it wouldnt work.

Using these boot settings:

https://i.imgur.com/UqBVzRV.jpg

I got this result

https://i.imgur.com/ICOScJZ.jpg
Then I played around with the boot options a bit:

These options
https://i.imgur.com/r06CQjr.jpg
Resulted into this:
https://i.imgur.com/cDRdoKO.jpg

Just a black screen with LENOVO. I tried multiple times and either nothing was happening, the PC was silent or other time the dvd drive was making rhytmical noises over and over again.
Opening the DVD tray got me this:
https://i.imgur.com/fF9QMAm.jpg

Using these:
https://i.imgur.com/dxcZzjQ.jpg
Got me here:
https://i.imgur.com/vNhRocf.jpg

A... Read more

Answer:Windows 10 cant be installed on GPT - Cant boot dvd in UEFI mode

Hi, Thanks for all the info. Some basic questions:
1. As it's a new laptop, could you not have used the manufacturer's recovery partition to restore it to 'as bought'? Or was it bought without an OS installed?
2. Are you sure the DVD that came with it is actually a Win 10 install DVD, and not something else?

3. If you wish to clean install, suggest you get a Win 10 DVD or bootable disk thus, making sure the language is appropriate:
https://www.tenforums.com/tutorials/...-download.html

4. Win 10 needs to be installed to unallocated space. For this reason and to ensure removal of all nasty things you don't want, you should delete all existing partitions (other than any manufacturer's recovery partition, although that no longer seems to exist if it ever did).

Finally to make things easier in the future, disk imaging is very strongly and repeatedly recommended here. E.g. Macrium Reflect (free) + its boot medium + external storage for images. That was you can restore a non-bootable/not working PC to a previously working state fairly quickly without technical help (barring hardware failure other than the drive).

Note - a better way to post screenshots is to use the icon to the left of the video icon above your post 'Insert image'.

14 more replies
Relevance 58.22%

Hello

Since UEFI exists, some people talk about BIOS replacement by UEFI in short-term (2011 for exemple) (see "News").

Who never has problem with BIOS bugs ? I must fight against several problems on one of my mobos because of its incorrect BIOS code, essentially for long time boot BIOS and very buggy S3 sleep mode.

However, when I read many posts about people who have installed their Windows 7 x64 in UEFI mode, I'm afraid of some new problems that UEFI causes, according to these people, even during a Windows session, even if installation was fine.

I would like to know your experience about UEFI, on motherboards which support it (my motherboard is an Intel DG45ID which proposes UEFI boot).

Thanks

Answer:Is it right time to install Windows 7 x64 in UEFI mode ?

I think most cost effective motherboards are still BIOS/MBR. I haven't really looked hard but I haven't seen any UEFI motherboards readily available where I am. I'd only jump to UEFI at this stage if I needed > the 2TB limit. 1TB at a time is big enough for me to backup. If the BIOS is playing up can't you flash it to a later version?

2 more replies
Relevance 58.22%

Hello All

I have original ISO file from MSDN website - it is Windows 8.1 Update 1 Enterprise (x64) MSDN version with Slovak language interface.
I?m create a bootable DVD (Verbatim DVD-R 4,7GB) in program ISO2Disc. This ISO I would like to install on to my system , more details about my pc - see my system specification. My motherboard is MSI Z77 Mpower with latest version UEFI - BIOS 17.12

I have a few question about installation a new windows 8.1 in uefi mode:

-what a bootable media is better ? I think USB stick or DVD disc
-what the function in the BIOS I must turn on or off, I mean the fast boot or memory fast boot
-UEFI mode is better then LEGACY mode ?

I have a bootable DVD Parted Magic , it is good Partition Manager. I must change MBR format to GPT - only GPT is supported format for UEFI , is it rue ? So , now i should format all disc inside my pc (secure erase for ssd disc and wipe for hhd). I can create NTFS partition with GPT format and aligned to 1204MB for all solid state discs and HDD. I can do this ?

I?m sorry for my english. I try to understand me. Thank you for all the helpful advice.

Answer:How to install Windows 8.1 in UEFI mode with bootable dvd

To clean install:
1) Clean the HD Drive, using Step one in this tutorial:
SSD / HDD : Optimize for Windows Reinstallation - Windows 7 Help Forums
than
2a) Clean install with the OEM manufacturer's Recovery Disk.

2b) Clean Install - Windows 8

2c) UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with

For USB:

x64
UEFI Bootable USB Flash Drive - Create in Windows

3 more replies
Relevance 58.22%

I have an Aspire v7 and I am trying to install Windows 10. I have a USB formatted with UEFI install of Windows 10 64bit, and it works on my other computers, but I can't get my Acer to boot from it. I was able to switch to LEGACY mode in the boot options in the BIOS and install it that way, but if I go back into the BIOS to switch back to UEFI, it tells me no media is found.How can I get my laptop to boot and install in UEFI mode, or at least be able to switch back to UEFI mode after the installation?

Answer:won't boot or install windows 10 in UEFI mode

Did you use the windows 10 media downloader and application to create the UEFI boot usb? 

1 more replies
Relevance 57.81%

Hi there. I've built a new HTPC. I'm trying to install Windows 7 Ultimate x64 on my HDD using the latest version of Rufus to make a bootable USB drive. I've realised that I have UEFI BIOS now, so I've searched for tutorials on how to setup Windows 7 using UEFI and a USB drive. I've disabled Secure Boot and Fast Boot in the UEFI BIOS. I've made bootable USB drive using GPT partition scheme for UEFI, FAT32 file system and default cluster size. The UEFI BIOS shows my UEFI USB drive and boots. But then, after "Windows is loading files" window, setup ends up with a blue screen. I have only one HDD and it's not empty. It has Windows 7 Ultimate x86 installed that I use on my old system and I'm forced to use for now.

More replies
Relevance 57.81%

Hello everyone,

since a few months, I'm the proud owner of a Vostro 3350.
But i am really trying hard to install Windows 7 in native EFI mode on it.
The Aptio firmware must support EFI boot.
But I can't find the option for the EFI Shell.

Thank you in advance for any help

Answer:How do I boot Windows 7 x64 in UEFI mode on my Vostro 3350?

You might check this web site
forums.bit-tech.net/showthread.php

6 more replies
Relevance 57.81%

Newbie here

System
Dell XPS 9550

Description

UEFI is the default settings for my laptop, however, my laptop suddenly had bsod. I was able to fix it by doing a legacy boot instead. I want to revert it back to UEFI mode but its still causing the same problem

I have this exact BSoD

I have a bootable USB via rufus

Thanks
 

More replies