Computer Support Forum

Jacks not detecting headset

Question: Jacks not detecting headset

I recentley did a complete reinstall of Windows 10 onto my computer, deleting everything else on the drives along with it. However now when I plug my headset into either the front or rear jacks Windows is not detecting anything. I have installed the newest Realtek HD Audio drivers but am I missing anything else? Or is it a more serious problem? Ty in advance.

Relevance 100%
Preferred Solution: Jacks not detecting headset

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Jacks not detecting headset

CoolioF said:

I recentley did a complete reinstall of Windows 10 onto my computer, deleting everything else on the drives along with it. However now when I plug my headset into either the front or rear jacks Windows is not detecting anything. I have installed the newest Realtek HD Audio drivers but am I missing anything else? Or is it a more serious problem? Ty in advance.



Open Settings and type Audio in "find a setting" box at top....this will give a selection of options to cure your problem.

4 more replies
Relevance 97.99%

I recentley did a complete reinstall of Windows 10 onto my computer, deleting everything else on the drives along with it. However now when I plug my headset into either the front or rear jacks Windows is not detecting anything. I have installed the newest Realtek HD Audio drivers but am I missing anything else? Or is it a more serious problem? Ty in advance.

Answer:Jacks not detecting headset

Originally Posted by CoolioF


I recentley did a complete reinstall of Windows 10 onto my computer, deleting everything else on the drives along with it. However now when I plug my headset into either the front or rear jacks Windows is not detecting anything. I have installed the newest Realtek HD Audio drivers but am I missing anything else? Or is it a more serious problem? Ty in advance.



Open Settings and type Audio in "find a setting" box at top....this will give a selection of options to cure your problem.

2 more replies
Relevance 97.99%

I recentley did a complete reinstall of Windows 10 onto my computer, deleting everything else on the drives along with it. However now when I plug my headset into either the front or rear jacks Windows is not detecting anything. I have installed the newest Realtek HD Audio drivers but am I missing anything else? Or is it a more serious problem? Ty in advance.

Answer:Jacks not detecting headset

Originally Posted by CoolioF


I recentley did a complete reinstall of Windows 10 onto my computer, deleting everything else on the drives along with it. However now when I plug my headset into either the front or rear jacks Windows is not detecting anything. I have installed the newest Realtek HD Audio drivers but am I missing anything else? Or is it a more serious problem? Ty in advance.



Open Settings and type Audio in "find a setting" box at top....this will give a selection of options to cure your problem.

more replies
Relevance 68.06%

Hi.
 
If you have a headset with two jacks is it possible to put the mic jack of the headset in one device (PC) and the headphones/audio jack in another device (e.g. TV) with no other cables or any extras?
 
Thanks.

Answer:Headset jacks in two different devices

It really depends on how long the cable is and how close the TV is to the computer.

4 more replies
Relevance 66.42%

Hello. My audio / headset jacks on the front panel of my PC running Windows 8.1 will not work. I had the Beats Audio Panel installed and was using the IDT High Definition Audio Codec and had rear sound through my speakers only. After checking your forum, I unistalled that driver (and Beats Audio) and installed the High Definition Audio Device driver only (no Beats Audio) and both rear jacks work. So, I can get sound and recording in the rear, but not it the front. I hope you can help me. Thank you.  

More replies
Relevance 66.01%

Alright, so i just bought this headset a couple days ago, and the headset works fine i can hear everything perfectly, but the mic doesn't work. I phoned the creative tech support but they know as much as i do. They just told me to return the product or contact my computers manufacturer . I read the post on this forum with someone having the similar problem but i was unable to follow the instructions to fix the issue he was having haha . So if anyone can help me that would be great

Answer:Creative Fatal1ty Headset (Jacks, not USB) Microphone not working

Hi JBrito and welcome to Vista Forums

Check that you are plugging the mic into the correct socket - it should be coloured pink - and that it isn't set to mute or that the levels are too low. You might also need to enable mic boost. Also check the headset - is there a mute switch (or similar) on there to disable the mic?

1 more replies
Relevance 66.01%

First of all, sorry for my english (I am danish).
I'm trying to help my son, as he has troubles with his new headset.

The headset works fine, he can hear everything perfectly, but the microfone doesn't work. I can see, that he is not the first, who has this problem, but now I have read most of the questions/answers and I still haven't found out, what to do to solve it.

The computer is running on a Vista Home Premium 32-bit.

Hope to hear from someone who can help.

Kind regards
A frustrated mother

Answer:Creative Fatal1ty Headset (Jacks, not USB) Microphone not working

Hello FruLind,
Take a look at this thread, it is the same problem as you are having and we were able to fix it.

Creative Fatal1ty Gaming Headset - Microphone Problem Reply to this Post Post Reply

Hope this helps, good luck and post your results.

11 more replies
Relevance 60.27%

i've been having this issue for a while now, my headset hasn't been detecting. it is connected via the 3.5mm headphone jack. this is a problem i've had with every pair of headphones/headsets i've tried, so it isn't an issue with the model. the only reason i haven't noticed this issue until as of recent is because i've had a USB connected headset. now that i need to use the 3.5mm jack, nothing is detecting. i've tried to fix this issue, and all that has happened is that my headset shows up as "Speakers (Realtek High Definition Audio)", and will not register my microphone. any help?
note that these three screenshots are taken whilst the headset is plugged into the 3.5mm headphone jack (the only connector that came with the headset)

 

More replies
Relevance 59.45%

Hi, I recently bought a new headset due to one of the ears falling apart...

My old one was USB with a 3.5mm cable and worked perfectly fine. The new one I got has no USB and uses the green and pink cables. I've plugged them in and it seemed as if they were working well but I realised they're not actually picking up the sound from the microphone, they're playing my computers sounds.

I looked through other forums and found people saying that it may be a driver issue, so I updated and got the Realtek HD, which then showed the Stereo Mix in my devices. Basically what's happening is that Stereo Mix and Microphone are both playing volume at the same level and acting as if they're the same. I've tried disabling Stereo and keeping Mic but it still plays the computers sounds. I've tried vice-versa too. The "Speakers" device is also playing at the same level of volume.

And then obviously since it's doing that, it's playing my computer sounds through Skype.

Basically what I want to achieve is have the headset playing sound but also be able to speak through skype without it playing the sounds I have on.

Also, there's a little switch on the cable to act as a "Mic Mute" switch, if the Mic is ON then the sound is fine, if I switch it to OFF the sound is very echo'd and distant.

Answer:New Headset, not detecting microphone.

First, stereo mix should be set as the default recording device. Then any input device that is used will be heard.

As Windows only allows one default audio playback device, separating sounds or what's heard may not be possible or is an option of the application program. I'm not familiar with Skype so I don't know what the options are or do.

9 more replies
Relevance 59.45%

Hi,

I recently purchased a VersionTech EACH G2000 and I plugged it into my computer, but Windows does not recognize it in the playback nor recording devices. Help would be appreciated.

Answer:Windows not Detecting Headset

From what I see this has the two 3.5mm plugs and also a USB. I can't find out if the USB is just for the lights or if it is used for anything else in the headset. But, make sure you plug in everything.

As you have a Dell, and are you using the built in sound device? or have you added a separate sound card? If you added a separate sound card, you need to connect the front panel to the new sound card.

If you are using the built in sound device, try connecting the headset and mic to the rear connectors (Green and Pink) and see if it works there.

1 more replies
Relevance 59.45%

Alright so I have a BRAND new Sony Vaio laptop with Windows 7, it's model # is VPCCW21FX. I got it only a week ago.
I play games so I connect with Ventrilo, but with this laptop it is not detecting my headset. It's a standard Logitech headset that connects through those pink and green jacks on the side of my laptop. It only recognizes the laptop's built-in microphone, however. This is what I've tried to get my headset's mic to work:

1. Disabling the built-in microphone. The laptop still did not recognize that I had a separate microphone plugged in through the jack.

2. Updating sound card's driver / rollback to previous, to see if it might work. It did not.

3. I tried to use the Ease of Access -> Install new microphone. The laptop would only still detect the built-in microphone, not the one that was plugged in through the jack.

I know it's not the headset's fault because it was working perfectly fine in another computer just this morning, and I tested it on my brother's computer a few minutes ago. His computer detects my headset. Yes I have the plugs in the correct holes, and no there are no drivers since this isn't a USB headset. The laptop KNOWS that something is plugged into the mic jack because it mutes the laptop's built-in microphone once there's something in it, but no sound is detected.

As you can see from the image, the Realtek microphone is the built-in one. My headset is currently plugged in, but ... Read more

Answer:Laptop not detecting headset

on that screen if you click on the microphone - so thatthe properties button highlights
click on that
another screen opens - click on recording TAB
on that screen - do you have 3.5mm Jack - anything you can enable there?

Well I have a Sony Vaio and just plugged a mic in (on vista) and it worked ...... so ignore above - that made no difference on my machine

I used start> programs> accessories> sound recorder
to test with

try that see if it works with that application
 

3 more replies
Relevance 59.45%

I got a Turtle Beach P11 Today i cant seem to get the mic to work.
I got a mobo: Gigabyte Z68x-Ud3h-b3
My Realtek cannot find the microphone usb port
 

Answer:USB port not detecting headset mic

Have you tried the headset in another computer?
 

1 more replies
Relevance 59.04%

Windows will happily output sound to my headset but there is no input from the mic. I have a xonar dg as my soundcard.

The headset mic has been tested on a laptop and works
The microphone mute button the the headset cable is set correctly
The jack is correctly in
On plugging in (and fiddling with the jack) the mic I can see noise in CP/Sound window
It has been tested on the front panel, the soundcard jack & motherboard jacks
Drivers have been wiped and reinstalled
System restores had no effect
A reinstallation of windows keeping programs & settings had no effect
The mic is not muted or set too low in Control Panel / Sound
The mic in my webcam works correctly (USB)
Connections inside the case are not loose
Toggling the front mic option in Cp/Sound/Recording/(the mic)/properties/custom has no effect
I also managed to get the mic to work (badly) for a few seconds after windows reinstalled. After I plugged in the headphone jack, the mic went dead and hasn't recovered since.

The mic has worked on this PC before, it seems some setting / software / driver is mucking up.

Answer:Windows not detecting input from headset

I noticed the sound card can only handle up to 48KHz/24-bit recording. However the CP sound options would let me set it above this. Lowering it to the acceptable level made no difference.

2 more replies
Relevance 56.58%

Hi-
I can not get sound from my front jacks but I get sound through the internal speaker. If the rear jacks are enabled then they will work.

Device manager shows: 2 high definition audio devices (not realtek). One for the rear jacks and the other for ATPI Inernal ATPI jack. No playback device listed for the front jacks.

I tried uninstalling and reinstalling the devices but the front jacks wont install

Any suggestions would be appreciated! Thanks!

Answer:HP400 sound from internal speaker and rear jacks but not front jacks

High Definition Audio Drivers are only the generic, basic function, Windows installed sound drivers. They are not the full feature drivers that the hardware drivers provide. Check HP for a correct sound driver, if available.

ATPI (ATAPI) suggests this is an old Windows XP PC that was upgraded. There may not be any better drivers than the generic ones you have now.

Also check the front panel audio connection to the motherboard (reseat the connector).

4 more replies
Relevance 51.25%

My Laptop Model : HP Pavilion 15-ab267cl  My Sony Bluetooth Head Set model:  Sony mdr-zx330bt I am not able to connect my bluetooth Headset to the Laptop. IN bletooth devices it's not detecting my headset

Answer:laptop Bluetooth is no detecting my sony bluetooth headset -...

Hi, You have to allow your Sony is discoverable. How ? Please check its manual. Normally it MUST have a blue button to press. Regards.

1 more replies
Relevance 50.02%

Hello. As you can see in the title, I have 2 jacks in the front (1 audio 1 microphone) and 2 jacks in the back (also 1 audio 1 microphone). I would like to plug my headphones into the front jacks, and my speakers into the back jacks.

However, Vista doesn't seem to recognize my front jacks. When I plug in my headphones, there are no new devices detected or anything, and the audio keeps flowing through my speakers. When I unplug the speakers, the Realtek HD Audio playback device displays "Not connected".

So the only choice I have at the moment is going over to the back of my computer and switching cables, which is quite annoying.

Any help?

My playback devices are:


Code:
Speakers
"Litexmedia Virtual Audio Cable" (9 of them)

Speakers
"Realtek High Definition Audio" <<<SET AS DEFAULT

Realtek Digital Audio
"Realtek High Definition Audio"

Answer:Got front and back jacks, but Vista only recognizes the back jacks.

hi you may need to get the motherboard manual and open your comp to check the wiring for the front jacks is correct

1 more replies
Relevance 43.87%

Hi All,

I want to know in Vista,

At the Same time,
How to get the Head Phone Front Jack on, output
the Rear output for the Speakers -5.1 Surround
a USB Headset for another Mic ONLY that is USB.

Three things all Going at once?

Is it possible,
I cant even get the Headphones front output-pink and the rear speakers playing at the same time
Thanks

Answer:How to use front Pink Headset, USB Headset, and Rear Speker outputs atthe same time?

Hi Dash,

I know its possible with Realtek HD devices...What type of device do you have?

Steven

1 more replies
Relevance 43.87%

Hi All, I have Nokia BH-900 bluetooth headset and X60s laptop, how to use the headset for VoIP calls? The OS is Windows XP. So far I have added the bt device to the device list, but for some reason the device connection does not activate, ie the headset keeps blinking green, not blue. And I can not find the bt device from any settings. I already tried the search on this forum, but the given instructions did not seem to match my case, or I did not understand them  BRJorma

More replies
Relevance 43.87%

So basically, will this headset work with windows 7 ?

Answer:Tritton AX 720 Gaming Headset with 5.1 Dolby Digital Surround Sound Headset

Yes it will. Google for reviews.

2 more replies
Relevance 43.46%

Hello

So three days ago I wiped all of my drives and installed Windows 10. I have a Corsair Vengenace 2100 headset. I installed the realtek drivers from ASUS download section for my motherboard and then I installed the headset drivers.

The problem is that my headset does not record anything through the microphone if I set it to be the default device for audio output. If I have my other computer speakers as the default output device my microphone works just fine.

This goes for all the USBs in the back of the motherboard. The headset works just great if I plug in the wireless reciever in the front of the computer.

I have tried to reinstall the drivers multiple times and checked a bunch of different settings in the sound manager in windows but nothing seems to work.

Have also googled all kinds of things but nothing seems to relate to my problem.

I do not have any external sound card plugged into my computer.

Thanks for any help provided!

EDIT: Can be closed as I found the win 10 forum after I made the thread. Sorry!

More replies
Relevance 43.46%

On Lenovo Thinkpad x1 3rd generation with windows 10, i'm pluging in my iPhone headset (I also tried with my samsung headset and one plus headset), but it will not recognize the mic. the headphones speakers works just fine, but the array mic stays on and no indication on windows, what so ever, that a mic was plugged too. Thank you for your assistence Idan 

Answer:Thinkpad x1 iphone headset plugged. headset Speakers works but not the mic

I'm not sure, but I think that this answer, about enabling multi-stream solved the problem https://forums.lenovo.com/t5/ThinkPad-S-Series-ThinkPad-Yoga/Audio-coming-from-headphone-and-speaker... 

1 more replies
Relevance 43.46%

HelloSo three days ago I wiped all of my drives and installed Windows 10. I have a Corsair Vengenace 2100 headset. I installed the realtek drivers from ASUS download section for my motherboard and then I installed the headset drivers.The problem is that my headset does not record anything through the microphone if I set it to be the default device for audio output. If I have my other computer speakers as the default output device my microphone works just fine.This goes for all the USBs in the back of the motherboard. The headset works just great if I plug in the wireless reciever in the front of the computer.I have tried to reinstall the drivers multiple times and checked a bunch of different settings in the sound manager in windows but nothing seems to work.Have also googled all kinds of things but nothing seems to relate to my problem.I do not have any external sound card plugged into my computer.Thanks for any help provided!

More replies
Relevance 43.46%

HelloSo three days ago I wiped all of my drives and installed Windows 10. I have a Corsair Vengenace 2100 headset. I installed the realtek drivers from ASUS download section for my motherboard and then I installed the headset drivers.The problem is that my headset does not record anything through the microphone if I set it to be the default device for audio output. If I have my other computer speakers as the default output device my microphone works just fine.This goes for all the USBs in the back of the motherboard. The headset works just great if I plug in the wireless reciever in the front of the computer.I have tried to reinstall the drivers multiple times and checked a bunch of different settings in the sound manager in windows but nothing seems to work.Have also googled all kinds of things but nothing seems to relate to my problem.I do not have any external sound card plugged into my computer.Thanks for any help provided!

Answer:Headset microphone not recording when headset is default audio device

Hi iBSOADed and welcome to TenForums,

First of all, you shouldn't have had to worry about installing any drivers after installing Windows 10 as Windows should do that automatically.

Have you tried using the Corsair Gaming Headset Setup program in the Downloads section of this page? Vengeance® 2100 Dolby 7.1 Wireless Gaming Headset
-Chuck

7 more replies
Relevance 43.05%

I have an Acer Aspire V 15 (V5-591G-55pv) laptop. The laptop has a HEADSET jack (it shows a little symbol next to it referring to a headset with mic and headphone) and i have a headset that has 2 wires. 1 is for the headphones and the other is for the microphone, so i am using a headset adapter that came with the headset itself. I have used the microphone and the headset adapter on my PS4 controller and it works so the microphone is not defected. my computer does not detect my headphones but still plays audio through it, and the microphone is not detected. PLEASE HELP!!!!!!
 

More replies
Relevance 43.05%

I can't figure out how to fix this. I noticed that, when I'm watching a video, my headset's mic will relay the audio coming into my headset. Disabling Stereo Mix doesn't fix it. The physical controller that's on my headset cable doesn't stop it from happening, as even if I turn the volume knob all the way down and flick the mute switch, it's still picking up the audio. Muting my headset from within the computer stops the mic from hearing it, as does switching to my speakers that are plugged into the front jack. My headset is a 3.5mm jack type plugged into the back of the computer, directly into the motherboard.
 

More replies
Relevance 43.05%

Hey,

the topic pretty much says it. I bought myself a new headset(C-media headphone set or something) which uses a USB-port instead of an original sound-port-thing. The problem is, whenever I plug the headset in the USB-port pretty much nothing happens and I can't get the sound in the headset, it just stays in the speakers...

It used to be no problem when I used a headset with the sound-port on the motherboard to just change it. Anyone have any suggestions on what I might do? :(

edit: forgot to say that it works just fine after rebooting the computer.

Thank you

Answer:Problem with USB-headset(Can't switch between headset and speakers without rebooting)

Hi Foonksh,

Try going into the Control Panel and go into Sounds and Audio Devices. From there you can pick the default device for recording and for playback. In the playback section, set the headset as the default device instead of your speakers.

1 more replies
Relevance 43.05%

HELLO TO ALL !

I am knew on the board. Greetings

I installed a NEW Logitech USB Headset 350 onto my Winows XP Service Pack 2 generic 'puter.

I now have no speaker sound and no option shows except the headset and "Modem #1 line ".

It sorta looks like I have no speaker drivers .

Unplugging the headset does not help.

Anybody know how to fix this problem so I am not forced to wear a headset for audio ALL OF THE TIME ?

HELP !

(ME)
 

Answer:Installed new USB Headset NOW no speaker audio even if I unplug the headset

Yeah, my USB headset was a little weird at first as well.

Try going into your volume control (Start > All Programs > Accessories > Entertainment > Volume Control):
1. Click Options
2. Properties
3. Change the mixer device from the USB headset to your speakers.

Should work.

Also should note you can change the output settings in most audio software (for example: Windows Media Player, Winamp, etc.) so if you can't hear anything from your speakers when using those programs, try fiddling with those settings as well. I know for Winamp it's Options > Preferences > Plug-ins > Output > double-click the plug-in you use (mine is out_ds.dll) and again change it to your speakers using the drop down menu.
 

5 more replies
Relevance 42.23%

With my old headset i used to have a blast recording sounds/music coming out of my comptuer directly using wave out. Often for MSN voice clips and such.

I haven't changed anything, but now that i have this new headset, the only recording i seem to be able to do is voice recording in sound recorder, i can't seem to record wave out mix on sound recorder, and can't record anything whatsoever in msn voice clips.

I can hear voice clips sent to me though, strange thing is, when someone invited me to an audio conversation earlier, i got the annoying ringing noise alright , but i couldn't hear anything.

I checked my volume controls nothing is muted.
Any help would be fantastic! Thanks in advance
 

Answer:New Headset dilemma (C-Media USB Headset to be precise)

Lame
 

1 more replies
Relevance 40.59%

Sound does not go through headset. A headset is not working. 

More replies
Relevance 40.59%

I've searched around a lot about this topic, but after hours and days of searching, I've found nothing to fix my problem. I have a headset that has speakers and a microphone (3.5mm jacks) that work fine, except when I'm trying to talk to someone using the microphone, they can hear the sounds coming from my headset (youtube videos, game sounds etc). I've tried installing the Realtek HD Audio Codec but it disappears after it finishes installing and after I restart (although it still remains in the Programs and Features uninstall page), the program files for it is empty with the exception of RtlUpd64.exe which doesn't do anything when executed and a few other files.
In device manager, the things I have under sound, video and game controllers are Audio Device on High Definition Audio Bus and the Intel Display Audio. I've updated everything to the latest. Also, I recently system restored my computer and before I did I had IDT High Definition Audio Drivers, but after updating they were changed.
I think the problem is that stereo mix is enabled somewhere or something to do with my drivers as when I tried plugging my headset into my brother's computer, it worked fine (he has the Gigabyte Realtek Audio Manager thing and was able to adjust the stereo mix settings).
If there's a program or workaround to this, or how to disable the stereo mix like through registry or something, please let me know.
My computer is a HP Pavilion dv6-7040tx running Wi... Read more

Answer:Headset mic recording sounds through headset?

You are correct, that is the usual cause of this problem. And aside from being set in the drivers, it can sometimes be set in the application (used for the communication).

That model does appear to use the IDT High-Definition (HD) Audio chipset. The problem is likely in the fact that you upgraded to Win10 and I don't see that HP supports nor supplies drivers for Win10 (I only see drivers for 7 and 8). Which means you are using generic drives supplied by Windows. The generic Windows drivers often work well enough to get hardware functional, but quite often don't support all hardware or all features of all hardware.
 

1 more replies
Relevance 40.59%

I have tried 2 different headsets using front ports of my computer. The headsets are detected by the computer and I can hear fine out of them, but no voice is detected. I have tried numerous tests and other small things, but nothing seems to work. The headsets are supposed to be working properly according to the system.

What do I do?
 

More replies
Relevance 40.59%

I have 2 headsets both from different companies, one from Andrea the other from Altec Lansing. I have them plugged into the front ports of my tower. My computer detects them both and says that they are working. However, I can hear out of them, but I cannot say anything. It does not hear me at all. I've tried various testing procedures and it doesn't detect anything.

What do I do?
 

Answer:Headset detected, not working (2nd headset)

Hi Cdn, The Vista default setting under audio and microphone is rear line in. Right Click the speaker
icon in your task bar or system tray. Click on the Recording tab at the top. Make sure that Front Mic.
is enabled and has a green check mark next to it. Click Apply and Okay. Try it now.
 

1 more replies
Relevance 40.59%

I have a almost broken headset, but the microphone still works fine, The microphone is connected on the wire right before the headset, Its not actually touching the headset itself.

Would this microphone still work if the headset was cut off?

Sorry but I can't manage to take a photo but

Answer:Will a Headset microphone still work if I cut it off the Headset?

Is the microphone actually supported by the headset, by that I mean when the set is on your head is the microphone carried close to your mouth so you have both hands free. If this is the case then cutting off the headset will mean the microphone will not have any way of being held near your mouth.
If you cut it off you will have to be very careful you don't cut the wires for the microphone & it's possible that there is a common return wire for the earpieces & the microphone in the form of a shielded cable, so it would be very difficult, but if you have skills in this area it could be done.

5 more replies
Relevance 40.59%

Hey.

Ive got an Logitech 250 headset USB, And i have a stereo soundsystem. So i wont be using the headset, but only the microphone. Is there anyway to 'split' the microphone from the headset, like with a software or something, Cause i dont want to hear everything on the headset when i plug the usb in, but i want to hear it on my soundsystem.

Any help? Without ripping my headset apart? :b
 

More replies
Relevance 40.59%

Hi,
I am having trouble with my windows installation after attempting to install windows 10 a second time on the same machine, but different partition.
I have used a bootable USB device with the windows 10 installation (created with the same machine and the same settings for OS).
After pressing F12 and selecting the USB as the boot device, i started the installation process and got to the stage where you select which drive / partition to install windows. But the list only contained the USB device i used to start the installation process, and the SSD did not appear when tried to refresh / reload drives (or unchecked the "hide incompatible drives" checkbox). 
After canceling the installation process, i was met with the following message when rebooting windows:
"Your PC/Device needs to be repaired.
The Boot Configuration Data file is missing some required information.
File: \BCD
Error code: 0x0000034
You'll need to use recovery tools. If you dont have..."

Before the error occured:
I have tried many different things BEFORE i got to the step above where I was able to start the USB stick and consequently ended up with the error.
However when the error occured the BIOS was reset to factory settings and i was able to log in to windows (and listen to spotify for an hour or so) before i tried the install that gave the error:

I tried installing windows 10 with a stick created from another computer. That time I got to the installation process. But when... Read more

More replies
Relevance 39.36%
Question: 3.5mm Jacks

I was wondering..
I've been familiar with the 3.5mm jacks connected usually to the headpones or earphones straight to the cellphone or to your pc.
But I was surprised when I saw a 3.5mm Jack with three wires inside it..
I was wondering, Which of these ones are positive and which ones are negative?

Thanks for the replies!

 

Answer:3.5mm Jacks

This could help you. Further down the page.

http://en.wikipedia.org/wiki/Phone_connector_(audio)
 

1 more replies
Relevance 39.36%

Please help -- I haven't been successful on my own. Have Internet Explorer hijackers prosearching.com, securitybulletin.net, and maybe others; also inundated with tons of scary pop-ups including in system tray. Many thanks for any advice, James.

Logfile of HijackThis v1.99.1
Scan saved at 8:06:07 PM, on 4/30/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\atmclk.exe
C:\WINDOWS\system32\dcomcfg.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\Program Files\Common Files\Logitech\QCDriver\LVCOMS.EXE
C:\Program Files\DIGStream\digstream.exe
C:\WINDOWS\System32\lhfxti.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\WINDOWS\system32\RUNDLL32.EXE
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\QuickTime\qttask.exe
C:\PROGRA~1\COMMON~1\ADAPTE~1\CreateCD\CREATE~1.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Palm\HOTSYNC.EXE
C:\Program Files\Hewlett-Packard\AiO\hp psc 700 series\Bin\hpobrt07.exe
C:\P... Read more

Answer:HELP ME PLEASE -- can't get rid of these pop-ups and IE hi-jacks

hi, welcome to TSG.
Please download SmitfraudFix (by S!Ri)
Extract the content (a folder named SmitfraudFix) to your Desktop.

Open the SmitfraudFix folder and double-click smitfraudfix.cmd
Select option #1 - Search by typing 1 and press "Enter"; a text file will appear, which lists infected files (if present).
Please copy/paste the content of that report into your next reply.

Note : process.exe is detected by some antivirus programs (AntiVir, Dr.Web, Kaspersky) as a "RiskTool"; it is not a virus, but a program used to stop system processes. Antivirus programs cannot distinguish between "good" and "malicious" use of such programs, therefore they may alert the user.
http://www.beyondlogic.org/consulting/proc...processutil.htm
 

3 more replies
Relevance 38.95%

Hey I got a Windows Xp service pack 3 Desktop and Im not getting any audio out of any of my Jacks and I cant use a microphone neither When I go on to the mixer the option to turn up the audio is there but it wont let me use it. I have tried updating all my out dated drivers and I cant find Windows Audio Service anywhere but I am running a Spanish version of Windows Xp I have no idea if Windows Audio Service has a different name in Spanish. I dont have a separate sound card its part of the mother board Any help I can get with this problem would be nice.
Thanks!

Answer:I have no sounds from any jacks and cant use a mic

Try...uninstalling the current audio drivers via Device Manager...then reinstalling the drivers originally developed for the system, if it's an OEM system (HP, Dell, etc.).
 
Drivers should be available at the manufacturer's website.
 
Louis

1 more replies
Relevance 38.95%

Dumb  question. There are two jacks on the front of my PC.One for a Mic and one for a headphone. Do they function just like the ones on the back of this PC in which my speakers are plugged ? I have some software that will"capture" sounds that come through my speakers, but don't want to get back there with all the cables,etc.  I tried plugging a mic into the front jack but it didn't work. Thanks.





Lenovo Desktop 3000, Vista Home Premium2 GB Memory 320 GB Hard Drive

Answer:Mic and Headphone jacks

yes

1 more replies
Relevance 38.95%

I have an M9350f elite series from HP. There are audio IN jacks in the back of the tower and two in the front.

I'm trying to hook my PS3 component cables up to my tower and play the sound through my speakers, but whatever I try does not work.. the PS3 is outputting sound via component cables..

I'm seriously getting really pissed right now.. I've tried getting this to work with HDMI-to-DVI and nothing is working........

It's extremely hard to write a detailed and flamboyant post when angered, I'm sorry.. but could someone offer me any insight to get this to work?

Answer:Need help with AUDIO IN jacks..

The computer most likely has 1/8" inch stereo input and the PS3 has dual mono RCA type outputs.

You'll need a converter cable to take the two RCA male plugs to make it into a 1'8" stereo male plug. Radio Shack has this.

2 more replies
Relevance 38.95%
Question: Ethernet Jacks

Ok so im putting in tho's ethernet jacks in my wall, bought a plate, and 5 plugs. They came with these grey punch down lookin things, but where can i find a tutorial(sp) on how to hook one of these up?

DId that make since? if not let me know
 

Answer:Ethernet Jacks

usually the jack comes with a small set of instructions but it's fairly simple. you just pick a scheme A or B and follow that on both ends.

try not to remove more that 2 twists outside the cable jacket, neatly trim the wires after you use the small punch tool to insert the wires into the slots.
 

10 more replies
Relevance 38.95%
Question: Audio Jacks

Hi Everyone

I have a tech related question (less problem) but please don't just say google it as I have and haven't found much help, whether I'm looking for the wrong thing or something I don't know.

I have a MSI 970 Gaming motherboard and it has 3 audio jacks on the back- Left, Right, Centre- but no matter how much I Google I cant find any pc speakers that use this set up.

The closest I've found is get a 5.1 set up and simply not plug in the spare two speakers- is this my only option for getting the most out of my gaming motherboard?

If you could link me to any relevant info or have any recommendations regarding which sound system to go for I'd appreciate it
 

Answer:Audio Jacks

the instruction manual says
Audio Ports
These connectors are used for audio devices.

?? Line in: Used for connecting external audio outputting devices.

?? Line out: Used as a connector for speakers or headphone.

?? Mic: Used as a connector for a microphone.

?? RS-Out: Rear surround sound line out in 4/ 5.1/ 7.1 channel mode.

?? CS-Out: Center/ subwoofer line out in 5.1/ 7.1 channel mode.

?? SS-Out: Side surround sound line out in 7.1 channel mode.

if you download the manual and go to page 77 ( on the English manual) , it shows you clearly how to connect up all different types of speaker set up from 2.1 to 8.1
http://uk.msi.com/support/mb/970-GAMING.html#down-manual
 

2 more replies
Relevance 38.95%

Hello!

My name is Isac and this is my first post at SevenForums and i got 1 problem now.

I got the Fatal1ty x300/x500/x1000 headset with jacks, so its not USB.

The problem is that my microphone doesent work, the sound works but my microphone wont show any sign of life.

So my question is .. What should i do? And anyone else had this problem b4?

Ploxx help, tyvm.

Answer:Fatal1ty Jacks not USB

  
Quote: Originally Posted by Aizakk


Hello!

My name is Isac and this is my first post at SevenForums and i got 1 problem now.

I got the Fatal1ty x300/x500/x1000 headset with jacks, so its not USB.

The problem is that my microphone doesent work, the sound works but my microphone wont show any sign of life.

So my question is .. What should i do? And anyone else had this problem b4?

Ploxx help, tyvm.


Ho and welcome

Can you confirm you have the correct driver by typing device mananger in search. Go to the sound tab and see if the driver is listed and if it has a yellow triangle on it. Also let us know if there are and "unknown" devices with yellow triangles

Let us know

Ken J

7 more replies
Relevance 38.95%
Question: audio jacks

IN W7 how do I make it so that both the rear and front audio jacks work? Currently, my front jacks are registered devices in my sounds but when I put a headphone jack in nothing happens

Answer:audio jacks

Hi XeRo,

Open the Realtek HD Audio Manager and left click the folder icon (shown within the red box). In the dialogue panel that appears, Connector Settings, ensure that both options are selected and then click OK.

Right click the appropriate socket and select Connector Retasking... (alternatively, double left click). This brings up the following panel. This is from my front green socket. Select the required option and click OK.

You can now close the Realtek HD Audio Manager by clicking OK.

9 more replies
Relevance 38.95%

Hey there, I've recently found out about this problem after building a new PC - whenever an audio device is plugged in, the sound only comes out from one side (For headsets, one ear, etc.). I have researched this for quite a while but first, my jack is as clean as new and there's nothing stuck in it. Secondly, I have triple checked the inside of the PC to see that everthing's been plugged in properly and there are no bent pins either. Does anyone have a solution to this? Please reply ASAP.

P.S. This is NOT a problem with the playback device. All of it work perfectly on other electronics.

P.P.S. All my settings have been configured properly. (I know this for sure as if I press hard on the lines of the playback device I can hear cut-off sounds in the other ear.)

Answer:Help with PC Audio Jacks

Quote:





Originally Posted by SourceForums


Hey there, I've recently found out about this problem after building a new PC - whenever an audio device is plugged in, the sound only comes out from one side (For headsets, one ear, etc.). I have researched this for quite a while but first, my jack is as clean as new and there's nothing stuck in it. Secondly, I have triple checked the inside of the PC to see that everthing's been plugged in properly and there are no bent pins either.




For starters what sound card do you have ?
Onboard or pci sound card ?
Also have you checked your sound mixer settings ?
Double click the speaker icon in the system tray menu.
Click on speaker box icon, navigate to levels:
Look at your main volume level and click balanced.
Do they seem out of order or not lined up for any sound to play in your headset or speakers ?
Left and right should both be equal for surround , stereo or general mono sounds from .wav .mp3 and etc.

If you don't mind, I like to see a screen of your sound settings so I can see what I'm dealing with.

9 more replies
Relevance 38.95%
Question: 2 monitor jacks??

I realized the other day that I've got two monitor hookups on the back of my machine. One is from my video card, and the others seems to be wired straight to my motherboard... I've heard that you can use RAM as memory for your video card, but I don't know if I can, or how to.
First International Computer, Inc. KA-6130 PCB 1.x
that would be my motherboard, straight from pcpitstop.com
ati rage pro 8mb card installed
 

Answer:2 monitor jacks??

8 more replies
Relevance 38.95%
Question: telephone jacks

Would someone please tell me the difference between an RJ11 and an RJ12.
Thank you,
jomo.
 

Answer:telephone jacks

6 more replies
Relevance 38.95%

I have an HP P6620f desktop. I have a pair of speakers that I have tested on other computers and had working on this system until recently it stopped. When I plug the speakers into the back port and turn the volume up max on the speakers itself and the in OS sound options I can faintly hear the audio. I have tried uninstalling and reinstalling the latest drivers. I have even tried reinstalling windows and it still happening. The front headphone jack will do the same with my head phones as well. Since its still happening after a reinstall im guessing its a hardware issue but I dont understand why my front headphone jack would do the same as well. I did recently remove my power supply and then put it back in.
Any other thoughts as to what I could try?

Thanks

Answer:Cannot get audio on any jacks.

The front headphone sound comes from the same chip on the motherboard that supplies the sound to the rear speaker output.

When you reinstalled, did you properly reinstall everything? OS, motherboard chipset drivers, device drivers including the HP supplied sound driver? Windows 7 will install a lot of drivers, some are the correct drivers and some are not, thus you need to install the PC vendor's drivers for some devices, especially the sound.

As you were inside the PC, accidental damage to the motherboard is a possibility due to the motherboard having static sensitive devices on it. Check the internal cabling and especially the cable that connects the front panel audio jacks to the motherboard, to make sure its properly seated. To see if the front panel connection is causing the low output to the speaker connection, temporarily disconnect the front panel audio connection (check or remove the front panel connection with the PC powered off. If you don't have a grounding wrist strap, at least ground yourself to a metal part of the chassis before touching anything inside).

1 more replies
Relevance 38.95%
Question: Solved: Jacks

I don't know what happened. I opened up my laptop yesterday, dusted a bit, and fixed my cracked shell [plastic body]. Now when I plug in my recording device plug into the jack, it records immediately and the sound comes out of the speakers. No difference it the headphone jack.

What happened? How can I fix it? And, I'm fine with going back in it to fix it.
 

Answer:Solved: Jacks

6 more replies
Relevance 38.95%
Question: Computer Jacks

After using my webcam as a microphone on my computer even when I wasn't video chatting for a while I decided to buy a headset. I bought it and came to find that the microphone didn't register with my computer. So I take it back, they replace it. I plug in the second one and it still isn't working. I tried both the jacks in the front of the computer and in the back, but neither work. The headphone jack though, does work so I believe the hardware is fine.

Things I tried:

Checking the sound settings on my computer to see if it was being recognized as plugged in (it wasn't).
Making sure it was plugged in all the way (it was).
Making sure the computer is nice and clean inside so that dust couldn't be to blame.
Any idea's on what could be going wrong?

PS-
I'm trying to get this to work with Ventrillo, here's the first error I got.

Unable to activate DirectSound for selected device.
DirectSoundCaptureCreate failed. HR=DSERR_NODRIVER. No sound driver is available for use
When I tried disabling direct sound like some forum's suggested, I got this one.

Failed to open sound input device. rc=-1, Open input wave device failed.

 

Answer:Computer Jacks

Is the mic listed in the audio setup? Most likely you have multiple mic inputs listed and as the internal mic is already configured, it is being left as the default.
 

2 more replies
Relevance 38.95%
Question: Supreme X-Fi Jacks

Hello,

I've a Supreme X-Fi Sound device, that came with my Asus Crosshair III Forumla motherboard, I need to change the Jack assignments for this device , any ideas?

Thanks in advance,
Ahmed.

Answer:Supreme X-Fi Jacks

I'm not sure if this will be of ANY help at all, since Supreme X-Fi is not realtek HD... but maybe it will help, or maybe point you in the right direction?

Realtek HD Changing Jack output reassignments ( FIX )

3 more replies
Relevance 38.95%

Hi there, just a quick question from a total computer noob.

I recently ordered a headset online so I could use a mic for PC gaming. When it came in the mail I discovered that it has two cords... one for audio input and one for output. My computer, unfortunately, only has one audio jack. I'm running 10.6.4 (mac).

Is there any way I can configure my settings so that I can use my headset with only one cord plugged in? The headset was rather expensive and I know I can't return the item. ):

Thanks in advance.
 

Answer:Two jacks... one hole

Probably want to get a cheap,mac compatable usb audio adapter.
 

2 more replies
Relevance 38.95%
Question: audio jacks

So I just got a new dell studio xps 9000 and it has no audio jacks at all. I have a logitech thx system but there is no where I can hook it up. I was wondering do the new computers have their sound output from the usb drive? So would this mean I need to find a converter from the three jacks to one usb?

thanks for any help you can give me

Answer:audio jacks

There are some speakers that can connect to your computer and power up via a usb. In term, these speakers also include an integrated headphone (audio jack) jack on the side of the speaker itself.
This is strange though....What kind of computer doesn't have audio jacks

Also, I have an xps 8000. I found that the head phone jacks are actually in a hidden compartment. Is your desktop black? There should be a sliding plastic black (or whatever color) door that you can lift up and find hidden several usb ports and audio jacks.

8 more replies
Relevance 38.95%

please could anyone surgest a fix for problem with sound output jacks on the front of these devices.this has occured with a new pc build,using Asus 64 bit M/B K8 DELUXE with AMD 3000 MHz cpu.I have fitted sound cables from back of devices and run them to the respective inputs on M/B ie CD and AUX I tried selecting digital output from devices in the device manager properties,but this also does not fix the problem.Also l have had the volume turned up also,Please feel free to make your surgestions.

Answer:cd/rw +dvd/rw sound jacks

Slightly confused, the output jacks on the front of your CD DVD players etc will respond if your pop in a set of headphones, load up a cd with a song on it and, you should then hear ot playing provided that the volume slider on the front is turned up.This will work whether you have connection at the back or not.Try this first.The output at the back is pretty well the same as the front but, you have a plugging facility to go into your MB.Having tried this earphone thing, and if it works then come back.

2 more replies
Relevance 38.95%
Question: Audio Jacks

OK I have this problem where somehow my settings or something in my playback devices jack information, the jacks shown are all mixed up. No idea how it happened but this is what it looks like.

And this is what it should look like/ what it looked like before it got switched.

Not sure how to fix this. I'm trying to get it back so the front jack is on one "device" and the rear jacks are on another. Trying to get my mic playback separate. It all used to be right and i'm clueless. Any help greatly appreciated. BTW Windows 7
 

More replies
Relevance 38.54%

I've recently had to move my computer to a room without a phone jack in it. Instead of going through the hassle of calling my landload to get another phone jack put in, I was just going to buy one of those wireless systems.

Anyone have any experience with them? Will they work with an internet connection?
 

Answer:Wireless Phone Jacks

6 more replies
Relevance 38.54%

Hey all,
I use a Logitech headset to talk to friends through Skype. I came do do the same today and found that my mic will not put out any sound. Both Jacks register that there is a headset plugged in but do not put out any sound.
This is extremely frustrating and would appreciate any help.

Answer:Microphone Jacks not functioning

Right click the speaker icon on the taskbar and choose "Recording Devices". Make sure those that show up there are not disabled. You can simply right click and Enable.

Some headsets come with a little switch just beside their volume control. This little switch can be used to turn on or off the headset mic. Maybe it got moved unintentionally?

Another thing I would try is to plug the headset on another mic jack or another computer and hear if its mic will work there as well. Unless you or somebody else moved something on the recording devices settings, the problem is more likely to be within the headset itself.

2 more replies
Relevance 38.54%

Alright, so Yesterday my foot accidentally knocked the power strip out of the wall and my computer powered down. Prior to that I had just been watching Netflix with my Turtle Beach x12 headphones. When I restarted the computer they no longer worked.

I have tested the headphones and they work with other computers/xbox and no problems, they work just fine. So I got another pair of headphones and used them with my computer. Still no sound.

I consider my self quite tech-savvy. I've exhausted everything I can find on this problem and sifted through at least 50 sites. I've made sure nothing is muted. I've re-plugged the headphones in and out multiple times. Neither headphone jack (front or back) is working. I've uninstalled and re-installed ALL sound drivers. No luck.

I have a Hp Pavilion HPE Series computer (h8-1239) and it uses "Beats Audio." I find this program to be really basic (no options at all really).

I'm wondering what there is for me to do? Could a unplugging cause both headphone jacks to stop working? Is there a program I can install that helps fix sound issues? I've used windows troubleshooting and it hasn't helped at all. It says my headphones are working correctly but none of them produce any sound. Any help is greatly appreciated.

Answer:Broken Headphones Jacks??

Hello Jakejab and welcome to TSF,

Open your Playback Devices from the System Tray (right click on the speaker in the tray). It should show you connected devices.

Do your headphones appear when they are plugged in?

1 more replies
Relevance 38.54%

Finished setting up 2nd PC with Win 10 clean install thanks to Brink's excellent tutorial....Thanks Brink...!!
Now this is new to me...When I shut down the box and Windows closes and the monitors box turns off...I noticed my USB connected fan on top (outside) the case is still running ?

Are the USB slots in the case supposed to be 'hot' all the time ? Seems if I power off and turn off the case at the back switch...there should be nothing left active in the box

Could this USB fan be running off the case battery ? Seems doubtful

Any thoughts on my ghost power supply and why the USB exterior case top fan still runs will be greatly appreciated...

Thanks...TiminAz

Answer:Are usb jacks on case supposed t be always on

Depends on the Mobo , on my current (and previous 2) Gigabyte boards , the USB ports are always on...they planned and made them this way so you could charge phones etc whilst the PC was turned off.

4 more replies
Relevance 38.54%

I have been playing pogo - video poker (jacks or better) for a while now and I made the mistake by clicking on less games and it removed that segment of games out of the home page. Now I can't get it back. Please help!

Please let me know how I can get video poker, jacks or better back on the home page of pogo?

Thank for any help you can give me.

CCbs04
 

Answer:Video Poker - Jacks or Better

Did you click on 'Show Fewer'? Cause I think you can just change that back by hitting 'Show All'
 

2 more replies
Relevance 38.54%

Hello, my headset just broke which was USB...I have a laptop which I sort of dock on my desk with a dozen things plugged into it, and normally I have my computer speakers plugged into the headphone jack, which I use those for music, and then my USB headset for gaming/voip at the same time.

Anyway I went out looking at headsets and I found an awesome one but it was just copper rather than USB...however my laptop does have 2 headphone and 1 microphone jacks on it, so I'm wondering if its possible to have each of the headphone jacks as its own device so I can have different things playing to each one.

I'm googling and messing around with 2 different headphones plugged into my laptop right now, but they are both just playing the same thing And I only have 1 Audio device (which tends to be whatever is plugged in...Forexample if nothing is plugged in, it will come out the Laptop's Speakers, and If I plug something into the headphone jack, it will come out that and the speakers will mute. I'm using the Windows 7 default audio driver, because the manufacturer of my laptop (HP/IDT) was having major issues with Windows 7...However its been quite a while since I looked into that.

Cheers.

Answer:2 headphone jacks as different devices?

Update, just installed the latest Realtek driver, In Devices I can see both Speakers and Headphones, however the headphones are set as communication device, If I try to make them default device nothing happens.

Right now in playback devices it shows this:

Another example of how I want it to work is there's a racing game I play called iRacing, in Audio options you can select the device for game sound, voip sound and 3rd for spotter sound (computer voice that tells you when a car is on your left or right, things like that).

Right now on my laptop I have computer speakers plugged into 1 port, and a set of headphones plugged into the second. By default the game was on "Speakers and Dual Headphones", and it was coming out of the computer speakers and the headphones I had plugged in. When I selected VOIP to be "Independed Dual Headphones", the game sound switched to my laptop speakers, and the VOIP was now coming out of the plugged in Computer Speakers and Headphones.

1 more replies
Relevance 38.54%

Hey everyone,
I'm new to this fourm, my name is Joe, nice to meet everyone -blah blah blah.. haha
I have been a reader for a little while but just made an account bc i need some help.
I roommate decided he wanted a new comp, so i obliged to build it for him. He's a big audiophile, so he got some nice speakers and what i think was a Audigy 2 ZS (i can find out for sure but im not at home right now, im doing this instead of paying attention in class) with has a 5.25 bay jacks. Everything put together fine, no problems cept one. The damn bay won't work no matter what i try! I'm pretty sure it's all hooked up fine to the sound card, and im pretty sure i got the latest drivers but i'm at a loss for ideas what to do. I put it off for a couple months (oops) and my roomie has been gettin on me to try to find a solution. Anyone else with the same problem or with any helpful advice? you'd make me and esp. my roomie very happy.

Thanks in advance,
Joe P.
 

Answer:Audigy 5.25 drive bay jacks -Help!!

Welcome,
1st-verify it's installed correctly, here's the manual:

http://us.creative.com/support/downloads/download.asp

Drivers- forget Realtek, that's for on-board sound, go here:

http://us.creative.com/support/downloads/welcome.asp?action=next

make sure on-board sound is disabled-go into bios

follow directions in the manual-good luck
 

1 more replies
Relevance 38.54%

Help would be greatly appreciated. My sound and microphone are working perfectly on the rear jacks of my desktop, plug into the front jacks and NOTHING.I am runing windows xp home edition with service pack 3and Realtec HD audio manager.
 

Answer:Front Mic jacks not working

Have you opened the case and checked to make sure the front panel audio cable is hooked up
 

2 more replies
Relevance 38.54%

OS: Win7

Audio Driver: Realtek HD Audio

With Realtek HD Audio Manager, I could retask (output/input) the rear audio analog ports.
It auto-detects devices being plugged into them. It mutes the port whenever the cord moves a little bit.

What i want to do is to disable auto-detect, force task options, and disable muting when a port is un-plugged. Is this possible?
 

More replies
Relevance 38.54%
Question: Video card jacks

I ahve a Nvidea GForce 5200 video card. There are two jacks on the card. One fits to my monitor's plug and the other doesn't fit the monitor plug. What is the second jack for? Can I somehoew use this jack for my monitor? I am asking because the monitor plug blocks my Wifi antenna.
 

Answer:Video card jacks

The other is a DVI connection. If your monitor does not have a DVI input, then you would need a DVI to VGA adapter. That being said, analog (VGA) seems to be preferable to digital (DVI).
 

5 more replies
Relevance 38.54%

When I plug in my headset I can get the sound to work but the mic won't work, I have it plugged in to the front jacks and I tried the back but in the back neither jacks work. I know 100% that my headset is compatible with the PC any tips?

More replies
Relevance 38.54%

Hey,

I recently re-installed Windows Vista on my Acer, and the entire set of jacks and USB ports on the front of the case don't work. All the USB ports etc on the back of the machine respond fine, but the headphone/mic. jack and USB ports on the front don't work at all.

I've tried re-installing the drivers from the Acer website and it still doesn't work. Help please
 

More replies
Relevance 38.54%

Our small office has an 8 port hub so we can share files and the internet (ICS / dial-up). 4 rooms, each with 2 ethernet jacks.

In my office, however, I would like another ethernet jack. It's only temporary, so I don't want to pull any cable. I have an extra 4 port hub at home that's not in use.

Is there a way to plug the hub into one of the ethernet jacks and then use the hub for three computers?

Thanks for any help.

Tom
 

Answer:Solved: Need more ethernet jacks

8 more replies
Relevance 38.54%

My iPod just "busted" today. There seems to be a problem with the headphone jack. I opened it up and all to try and fix it. It worked for a while, thne it stopped again. Oh yes, the warrenty is over. I'm actually one of the people who has had the same iPod for the longest, of the people I know. =3

Well I was just wondering, because other than this my iPod is pretty much in 100% (maybe 90ish%). So if I actually decide to retire this thing I'll use it as an external HD.

BUT, I was wondering if you guys consider it worth to order a new headphone jack from one of these sites online (I already broke open my iPod so I'd probably be able to figure out how to change it myself)

I could also consider getting a new iPod... Christmas is coming so it wouldn't be too bad of an idea. And I'd get a free External HD!

But my question is, have they improved this? I heard the Shuffle doesn't have this problem with the headphone jack (but I think the shuffle is too small for me), what about the others? Classic still suffering from the same issue? How about the Touch?

Thanks.
 

More replies
Relevance 38.54%

I've got a Creative AudioPCI sound card. Windows identifies it as "Creative AudioPCI (ES1371, ES1373) (WDM)".

What do the colors on jacks mean? I've figured out that the green jack is a low impedance output for speakers, it's probalby 8 ohm.

What are the black, red and blue jacks?

I think one is line in, one is line out. Are line in and line out 600 ohm? And what color are those jacks?

What's the function and impedance of that third jack?

Thanks.

Steve
 

Answer:Creative AudioPCI jacks

The third jack is Microphone in. Whatever colour code (mike is usually pink) I think Creative always go - top to bottom - Line in - Mike in - Line out and Speaker out.

Sorry on impedence - beyond my knowledge.
 

1 more replies
Relevance 38.54%
Question: Front Audio Jacks

My computer has a panel on the front with 4 usb slots, a mic input, and a headset output. Can anyone tell me how to get these mic/headset thingys to work? It's funny, I cant remember EVER using a computer that had front audio jacks that worked. lol. I know there must be a way.

Answer:Front Audio Jacks

first, your motherboard/sound card must support it.
what is your motherboard and sound card?
if you got a manual with them, they should tell you if they support it and where the pins go

6 more replies
Relevance 38.54%

My system, Asusu mobo M3A, AMD x2 64 3.0 ghz, 340 gig's hdd space, 2 gig ram, Radion vidcard hd 3850, Vista Business,
I have front sound jack and mic jack. the don't work i check control panel find the front jacks listed as high def audio device check mobo book find there is a setting in the bios to change the front jack setting from high def sound to regular jacks, cheanged the setting rebooted and no joy. both jacks still listed in device manager as hifgh def devices. tried to delete in device manager and reboot still the same no sound or mic out the front jack's ?????
Any ideas would be much appreciated,

Blownup2008

Answer:No sound or mic from front jacks

I can suggest reinstalling the drivers.

1 more replies
Relevance 38.54%

After I hooked up my computer to my TV I got audio jacks plugged them in and the computer sees the black jack but there still no audio, These are audio jacks right?
 

Answer:Thesea are audio jacks right?

10 more replies
Relevance 38.54%

Is it true that Old telephone jacks can interrupt Internet Connection?

Answer:Telephone wall jacks.

If their dead no but live then maybe if the insulation is worn from the wires.

2 more replies
Relevance 38.54%
Question: front panel jacks

When connecting the front panel (mic, headset) of a case to the mobo, is it possible to plug it in backwards and still have it work. I ask only because in my VIA HD screen it lists the back panel and front panel. In it the green jack is highlighted where my speakers are connected to. In the front panel I have my head phones w/mic plug in and in the VIA HD panel it's not showing up. So when I use my headphones it does not mute my speakers.....sound comes from both speakers and headset. If I plug headset in to jack on speakers it mutes speakers and sound comes only through headset but I can't use my mic. So I have to use front panel w/headset and turn off speakers....is there a way to work around this or a fix.

Answer:front panel jacks

Quote:
is it possible to plug it in backwards


Probably not, but seeing as the case is from Ultra who knows. Anyway check you bios settings under "Onboard Devices Configuration" and make sure the "Front panel Select" setting is set to AC'97. Reason being is that your case doesn't have/support HD Audio through the front panel, only an AC'97 connection. Couldn't find anything on Ultra's site support/manual-wise (they are willing to sell it to you though, at nearly twice the price as from Tiger Direct; go figure, one owns the other), but I did find this review on it,

Ultra Products E-Torque Midtower Case | Maximum PC

that at least says which it has. Probably find once you make that one change in the bios (HD Audio is the default), it should work as expected.

2 more replies
Relevance 38.54%

Finished setting up 2nd PC with Win 10 clean install thanks to Brink's excellent tutorial....Thanks Brink...!!
Now this is new to me...When I shut down the box and Windows closes and the monitors box turns off...I noticed my USB connected fan on top (outside) the case is still running ?

Are the USB slots in the case supposed to be 'hot' all the time ? Seems if I power off and turn off the case at the back switch...there should be nothing left active in the box

Could this USB fan be running off the case battery ? Seems doubtful

Any thoughts on my ghost power supply and why the USB exterior case top fan still runs will be greatly appreciated...

Thanks...TiminAz

Answer:Are usb jacks on case supposed t be always on

Depends on the Mobo , on my current (and previous 2) Gigabyte boards , the USB ports are always on...they planned and made them this way so you could charge phones etc whilst the PC was turned off.

0 more replies
Relevance 38.54%

Hey there, just bought a Logitech Z-506 speaker set and I'm having a bit of trouble. The audio jacks on my computer (both front and back panel) don't seem to be detected by the system, meaning that my new speakers (as well as my headphones/microphone) don't work. I do get sound out through HDMI though, but I'd rather not leave the TV on whenever I want sound on my computer.

This thread recommends that I click the yellow folder in Realtek HD Audio Manager and enable the back panel from there, but there wasn't the option there:

http://social.msdn.microsoft.com/Fo...t/thread/95a9f716-889e-470d-b185-8d92ca90e0d8

Also, now that I've updated the drivers I can't find Realtek HD Audio Manager and the sound still doesn't work.

Looking through the playback devices, the only ones working are called 32LG3000 (My TV, which is working as a sound system for now) and two devices called Digital Audio (S/PDIF), which don't make sound when I plug them in. Any ideas what's gone wrong?

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Professional , Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 8109 Mb
Graphics Card: AMD Radeon HD 6900 Series, -2048 Mb
Hard Drives: C: Total - 244095 MB, Free - 94896 MB; F: Total - 1907726 MB, Free - 463295 MB;
Motherboard: Gigabyte Technology Co., Ltd., Z68XP-UD4, x.x,
Antivirus: avast... Read more

Answer:Audio jacks not working

6 more replies
Relevance 38.54%
Question: Front Audio Jacks

I have an Antec Sonata II case with ASUS P5LD2 motherboard.
I have some problem with the front audio jacks, at first there isn't any response when I plug in my mic/headphone, but then I checked an option called "Disable Front Jack Detecting", now there is input/output. But I want the detection to work like the jacks at the back, because I want my speakers to shut off when I plug in my headphone.
Is there anything I can do?
 

Answer:Front Audio Jacks

Even though it appears you're having the same problem, please start a new thread. It's very difficult to keep two problems straight and who's working on what in a single thread. Thanks for your cooperation.

Assuming that you have a standard case, you probably have not properly connected the front case jacks to the audio block on the MB. There are usually several jumpers on the audio block that are removed when you have front speakers/mike to allow the front jacks to disable the rear jacks. These must be removed and replaced with the front panel wiring.
 

1 more replies
Relevance 38.54%

Hi Guys,I have recently formatted my SL500 due to the HDD info being corrupted (thanks kids).I Have got everything working however the side audio jack dont work, the speakers do not disable and no sound is being put through my Headphones. There is an unknown device in the device manager but i cant for the life of me figure out which driver i need to download to fix this problem.Any help would be greatly appreciated.. Thank you

Answer:Audio Jacks not working

Hi!Let's see. There are all drivers of sl500 notebooks on this page:http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70413and look at an audio driver Conexant Audio Driver for xxx system - ThinkPad SL300, SL400 and SL500 at the beginning of page in section audio.  

3 more replies
Relevance 38.54%

I have a new Dell XPS 8700 , it has 6 audio jacks with teeny tiny symbols, which colored jack do I plug my stereo speakers into? For now I have them plugged into the headphone jack on top of the computer. The volume here is very low. I tried plugging into the 6 jacks with no luck. The speakers are from an older Dell.

Answer:XPS 8700, audio jacks

green=stereo output front channels                 black=stereo output rear              grey=stereo output side
gold=dual output, center, subwoofer                blue=stereo output line level        pink=mono microphone output
At least that's what my xps 8700 book says.  Check the speaker icon in the taskbar for sound levels, they may be set real low. Also check accessories,sound, recorder, click on O.K., click on speakers. Hope this helps.
 

7 more replies
Relevance 38.54%

Hi, just bought a webcam & headset to use skype but cant seem to get the headset to work on the front audio in/out jacks on my computer.
Is there some setting I need to adjust? (Vista!) I didnt get any software with the headset only the webcam but that seems to work (after a fashion!) the image is very slow! Is there some adjustment for that too?
thanks
 

Answer:front jacks enable?

12 more replies
Relevance 38.54%

The sound card in my Dell PC has 6 jacks with the following symbols:

Answer:Symbols on Sound Jacks

Although I included an image of these jacks, it doesn't appear in the message. The "include image" feature of this forum seems to be broken. The images are at
Rowan

8 more replies
Relevance 38.54%

soo i have a 5.1 system for my computer

it has 3 jacks
black
orange
green

i know green is for the headphones

but what is black and orange for?

a little program i have, has both of them set for "front speaker out"

so i guess my question is, is this correct? or should one of them be set for "rear speaker out" or something along those lines?
 

Answer:Solved: sound jacks?

Orange should be: Sub+Center (or just center), black should be Rear out. Green is actually not for headphones, but front channel (which includes also headphones, as well as the front pair of speakers in a 5.1 setup and any stereo speakers)
 

2 more replies
Relevance 38.54%

The headphone jacks on the front of my CD-Rom and Burner do not work. I have checked connections inside and out and they are all working. If I plug my headphones directly into the back where the speakers go I can hear thru the headphones slightly and that is with the volume all the way up. Does anyone know why my headphone jacks are not working. I have looked everywhere for a solution.
 

More replies
Relevance 38.54%

hi i recently purchased a xblade case the trouble is i dont where to connect the font usb and audio jacks as i cant find a manual for my motherboard it is a epox ep-4plmi but i cant find a manual anywhere please can anyone help
 

Answer:front usb and audio jacks

16 more replies
Relevance 38.54%

I'm attempting to connect a new Logitech Z-623 2.1 speaker system to my XPS8700 windows 7 tower. The sound system has one male jack and the 8700 has six colored female jacks. Which colored jack do i use to get maximum operating sound from the logitech Z-623 sound system?
Are there any other adjustments in the XPS software required to get maximum sound from the logitech system?
My email address is: [email protected]

Answer:XPS 8700 Audio Jacks

If I remember correctly, the audio jack you want to use is light green and should match the color of your male jack.  If they are not color coded, it should be the middle upper female plug that has a symbol with an arrow pointing away from the symbol.  All the other jacks are for 5.1 and 7.1 sound system. 

1 more replies
Relevance 38.54%

Bought a new HP 410-010. Sound works from the monitor, but earphone jacks don't produce any sound on working earplugs. Have tried all the suggestions online but no success.

Answer:earphone jacks don't work

Exyachtie, welcome to the forum. I suggest that you run HP and Windows Updates to assure that your software and drivers are up to date.  When you plug your headphones into the jack, you should get a message in the bottom left of the screen telling you that "Information - You just plugged a device into the audio jack".  If you are not seeing this message it may be that the headphones are not compatible with Win 10. I am using an older pair of Sony Dynamic Stereo Headphones MDR-32 that work nicely. Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.

3 more replies
Relevance 38.54%
Question: front panel jacks

hi bas i have problem here hope u can tel me a solution.i am using asus p5kpl-am/ps motherboard and iam using on board sound card that is realtek alc662 6-channel high definition audio codec.so, whats the problem i am having is i am not able to use my front panel audio jacks(both headphone and mic).all the wire connections are given correctly from the motherboard to the cabinet audio jacks.no detection is been occurring in the front side when the pins are plugged.here i have attached the audio manager snap.please help me.thank you

Answer:front panel jacks

Have you checked your BIOS to make sure the front panel jacks are set to AC'97?

9 more replies
Relevance 38.54%

I have recently restored an HP DV7 3063cl laptop that died from an overheated motherboard (MB). I replaced the MB with a new board from HP when the price was reduced to about $100, upgraded the CPU with an advertised as new AMD 640M, and applied Arctic Silver on both the CPU and Graphics chips. I put in 4 G of fresh memory, got the computer to operate, and installed Windows 10. There is no sound through either of the headphone jacks. When I insert the plug into the jack, the sound from the speakers usually stops. I have done the following several times without success: uninstalled and re-installed the sound device in Device Managerrun the windows troubleshooterverified that I have the latest driverinserted different earphone into the jacksmade the headphones the default sound device Any more suggestions, other than replacing the headphone jack assembly?

Answer:no sound through either of the headphone jacks

#HPExpertDayAs suggested earlier, call HP support.

1 more replies
Relevance 38.54%

I have a mic and an earphone jack on the front of my case. There is also two usb ports. The usb ports work but the jacks doesn't. I don't use the onboard soundcard (AC 97). I use a Sound Blaster Live Value. How can I get my front jacks to work. I hate to go to the back of my case every time I want plug in my headset.

I am using Windows XP Pro SP3.

Thanks
r00ster

Answer:Sound jacks in front

If you don't use the onboard sound card then you will have to run extentions from the back of your sound car in the back to the front of the case. Those audio jacks in the front are connected to your MB allowing your onboard sound to come through the front speakers.

4 more replies
Relevance 38.54%

Ont he back of my computer, I have 6 Audio Jacks. Two of them are In's, so we won't be discussing them (much). The other 4 are as follows, Line Out, Rear Speakers, Side Speakers, Center/Sub. The only one that works is Line Out, I never checked the other ones because I didn't think I would ever need them.

I just got a new Subwoofer today, it's for a Home Theater, but I was able to rig up a compatible cable. I know the cable isn't the problem because I tried it with my MP3 player, and it worked great. But when I plug it into the Center/Sub channel, nothing. Just to make sure, I played a song, and tried plugging my main speakers into the other 3 jacks, with no sound.

Computer Specs:

Custom Built by me.

Intel Pentium D Dual Core 3.0 GHz
2 GB RAM
256 MB single SLi Graphics Card (Gigabyte)
Gigabyte GA-8N-SLI motherboard
Windows Vista Ultimate Edition

Drivers all updated fully (Windows Vista edition drivers if available)

The sound is Realtek AC850 with AC'97 codec.

Now, if I plug the subwoofer into the Line Out, that works too, it's just these other jacks that don't work. I've tried to get them to enable in the software that came with my motherboard, but there is no option for that, I guess it's just supposed to... work, and that's exactly what it's not doing.

Now I said we wouldn't be talking about the "IN" jacks much, so here's that little bit. Int he software, those two I can change to be In's or Out... Read more

Answer:Rear Jacks On Motherboard

Now, if I plug the subwoofer into the Line Out, that works too, it's just these other jacks that don't work. I've tried to get them to enable in the software that came with my motherboard, but there is no option for that, I guess it's just supposed to... work, and that's exactly what it's not doingYou are probably in two channel audio mode.In control panel>sound effects manager>speaker configuration tab, you should see the option to enable more channels. As you do it, you will notice the port functions for the sound card change. For 3 output ports, you need to set it to at least 6 channel.I don't have my vista system in front of me now (xp) but the directions should be close.

2 more replies