Computer Support Forum

Toshiba Satellite A200 Synaptics Touch pad, scroll doesnt work.

Question: Toshiba Satellite A200 Synaptics Touch pad, scroll doesnt work.

Toshiba Satellite A200 SKU PSAF6A-02Q01N Synaptics Touch pad issues, scroll doesn't work.

Operating system Win7 x64, re-formatted and upgraded from Vista x32, after having initial problems installing drivers and getting everything to work smoothly (for at least 2 months now), i was successful. Today out of the blue the scroll on the touch pad stopped working.

I read on some forums what to do, most said try uninstalling the driver using CCleaner and reinstall.
Tried to uninstall and re-install driver from Aus Support > Drivers, did this but got error, (something about) not recognising the OS.

I went to the Synaptics website found a driver which was recognised, installed it but not really wanting to restart the pc before i get some advice first. As there is a warning about specific drivers for specific Manufacturers and Models..

Help required, please.

Relevance 100%
Preferred Solution: Toshiba Satellite A200 Synaptics Touch pad, scroll doesnt work.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Toshiba Satellite A200 Synaptics Touch pad, scroll doesnt work.

Hi,

Uninstall the existing touchpad driver and install this one:

http://support1.toshiba-tro.de/tedd-files2/0/tpdrv-en-20090320132707.zip

Recently, it has been already discussed about the touchpad malfunction in this thread. But unfortunately, it didn't help him
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=52689&tstart=30

7 more replies
Relevance 104.14%

Hello dear,  i have problem. My synaptics touchpad doesnt work. I tried uninstall mouse driver and reinstall but still doesnt work. I didnt know what uninstall firt if synaptics in programs or driver of mouse. Thank you for help! Matyas

More replies
Relevance 100.04%

I have a Toshiba Satellite A200 running 32 bit Vista, and I used to be able to scroll with the touchpad, however, it doesn't seem to be working any longer. Also, in the synaptics pointing device program, I am unable to configure actions to the left and right buttons. I checked apoint.exe and it seems to be working fine...does anyone know what may be causing this or how to fix it? What should I be reinstalling? It's very annoying and I'd like to be able to scroll without holding the button and dragging. Thanks

Answer:Toshiba Satellite A200 Notebook - Synaptics Touchpad Not Scrolling?

It could be a hardware issue.

I had similar problems w/ notebook - mousepad had to be replaced.

You could try to un-install all drivers in Device Manager then re-boot. Vista will re-install. Also make sure to go to OEM site and get updated driver - if available.

Note that you will lose mouse function completely after un-install. Have USB mouse or b/c familar with CTRL-ALT-DEL that will get you to screen so you can use arrow keys to restart system

Regards. . .

jcgriff2

.

1 more replies
Relevance 100.04%

Quote:





Originally Posted by justinc89


I have a Toshiba Satellite A200 running 32 bit Vista, and I used to be able to scroll with the touchpad, however, it doesn't seem to be working any longer. Also, in the synaptics pointing device program, I am unable to configure actions to the left and right buttons. I checked apoint.exe and it seems to be working fine...does anyone know what may be causing this or how to fix it? What should I be reinstalling? It's very annoying and I'd like to be able to scroll without holding the button and dragging. Thanks

More replies
Relevance 96.35%

Hello,

my touchpad scrolling doesn't work.
I tried everything what is possible. But without result.
I think it is maybe on account of a bad driver.
But, I don't know...

In device settings -> settings, I have got only two points: overview buttons

I am sorry for my english, I know that I need to improve it.. :P

Help me pls!

Thank you...

Answer:Satellite A200 - Touch pad scrolling doesnt working

Go to Control Panel -> Mouse, and check the Advanced settings. There should be an option to configure the Scrolling feature.

Note that vertical scrolling works on the right side edge of the touchpad.

8 more replies
Relevance 92.25%

Hi,

I bought my Satellite A200 (psae3e)3 months ago with Vista. I sent my computer to a lab and asked them to install XP. Everything seems to work just fine besides the scroll function on the touch pad.

I tried everything from installing the sinaptics and alps driver again to digging into any configuration. I could find related to the mouse in the control panel. Also tried the FN key + f12 (supposed to turn the scroll on and off) with no success.
Any help is appreciated.

Thanks,
Lee.

Answer:Satellite A200 - scroll functions doesn't work in WXP

Hi,

the FN + F12 is not for the Scroll function of the TouchPad. This is like the SCROLL LOCK key on a Keyboard.

And you don?t need to install the driver from Synaptics and ALPS. Only install the driver for your Touchpad.
After installing the right driver, I would go to the Properties for the Touchpad and maybe there is a function to activate and deactivate the scroll function.

3 more replies
Relevance 91.43%

When I change my windows from xp to w 7 my scroll dosen t work.
What should I do?

Sorry for my english....

Answer:Re: Satellite A200 Touchpad scroll dosnt work after Win 7 installation

Hi

You should install a compatible touchpad driver.
Choose Satellite L500 on the Toshiba European driver page.
Here you will find the 2 Win 7 touchpad drivers; Alps Electric and Synaptics.

Both have to be installed!!!

Greets

9 more replies
Relevance 91.02%

hi @ all,
i have bought my toshiba satellite a200-1cg this week and the integrated webcam doesnt work. so my question: is there any software for the integrated cam to download for the psae3-serie?

i have only found drivers f?r the a210 and the a200 psae0?? but this two drivers doesnt work.
so what to do?
in the device manager stands: the cam couldnt be started (code 10)

i dont know what to do.
please help me

Answer:Webcam doesnt work in my Satellite A200-1CG

Hi there,

this problem was already discussed in this thread:

http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=24161&messageID=88732

I hope it helps you out with your camera-problem

1 more replies
Relevance 90.61%

Hi There,
I have a friends Toshiba Satellite A200 that when starting does not get past the post, you get the screen "In Touch with Tomorrow Toshiba" Press F2 System Utilities, or F12 for boot menu. The blue bar get about 3/4 of the way accross then it reboots. Even if you press F2 or F12 you get the same outcome.

Any help would be appreciated.

Regards
Brett

Answer:Satellite A200 - Post cycle boots on - In Touch with Tomorrow Toshiba

Hi,

it looks like a Bios corrupted and need to reflashed. The problem is that you need dos-based bios and floppy disk to reflash it. On the Toshiba driver page, there is only Win -based one.
Note, I just suppose that is Bios trouble maker but it can be mobo related issue itself.

Anyway, you should contact the service center, it's not impossible to solve such issues in this virtual forum

2 more replies
Relevance 88.56%

Hello

i wonder if anyone has come across this problem.
I am on Win7 64 bit OS i have tried everything but every so often the scroll function on my touchpad ceases to work and i have to restart the PC for it to work again.

Does anyone else have this prob and have they found a soloution?
I have tried uninstaling and reinstalling drivers i have tried also generic drivers always the same problem.
This is very annoying and i would really appreciate any assistance


thanks for reading.

Answer:Satellite L650-12p touch pad scroll function does not work always

i guess im the only one with this laptop or this issue hehe

6 more replies
Relevance 88.15%

I have a HP laptop with a Synaptics touchpad. if I am on a document i can put the cursor on any part of the page and scroll down. but if i am on a web page i have to move the cursor to the right side of the page to where you scroll down and then hold down the left mouse button to scroll. i used to be able to scroll the same way on web page as on a document and it is a bit of a pain to have to move to the right and hold down the mouse button.

any ideas out there??

thanks

Edit: I just went on another website and was able to scroll there. this might be something only happening on this site
 

Answer:Synaptics touch pad wont scroll

10 more replies
Relevance 87.74%

After installing Windows7 the scroll function doesn't work anymore.

New driver are installed - doesn?t work
I tried to install driver of vista - doesn?t work
FN + F9 are activated.

I don?t know what the problem could be.

Any ideas?
Thanks
Nik

Answer:Satellite U400 - touch-pad scroll function doesn't work

> New driver are installed - doesn?t work
Have you installed Synaptics touchpad driver?

Open Synaptics properties and check if this option is activated properly.

By the way: FN+F9 has nothing to do with this specific option. Using this key combination you can just enable/disable touchpad in general.

2 more replies
Relevance 87.33%

Hi

I had Vista on my Satellite laptop A200-20A. Part Number is: PSAE6E, and now I have Windows 7 and my sensor doesn?t t work.
I?ve download driver from Toshiba support but installation doesn?t go.

Help me please...please watch this video, this is what I?m talking about
Watch at starting on 00:29 sec ... http://www.youtube.com/watch?v=kOlFq_kPNS4&feature=related

Answer:Satellite A200-20A - sensor on touch pad doesnt work

Hi dude

I watched the movie on you tube but not sure what you exactly mean.
You can enable and disable the touchpads dual mode? this is what I can see in the movie.
You can switch between the Cursor Mode and Button Mode. When you switch to button mode, then pad blinks blue.

But it seems that you cannot move the cursor. Right?

Are you sure that touchpad is not disabled? Check the FN + F9 keys which enables or disables the touchpad.
I didn?t find the touchpad driver for Win 7 32bit in the Satellite A200 section so I would recommend installing the touchpad driver which is released for Satellite A350.

There is a driver from Synaptics and Alps Electric.
Install both.

5 more replies
Relevance 87.33%

Hello,

I have an A200 and have upgraded to Windows 7. Can anyone help me with how I can get the touch pad to work?
I would be very gratefull for any advice.
Thanks in advance

Answer:Satellite A200 - Touch pad doesn't work with Windows 7

Wait a moment. What is wrong with touchpad?
Is touchpad completely out of functionality or you are just missing additional touchpad function?

Have you installed touchpad driver?

3 more replies
Relevance 86.92%

in short my friends rebooted his little gil laptop to window xp 2000 and now we cant get the laptop to connect to the wifi its like the laptop doesnt reconise it has a wlan installed so imthinking maybe we lost a driver

ive ogne ito device manager and it say 1394 net adapto and unknown device

any help
 

Answer:Toshiba Satellite Pro a200 - Cant get my wifi to work

sounds like a driver issue. Reinstall the drivers for the device.
 

2 more replies
Relevance 86.1%

Hi!

After buying new lappy Satellite A200 I got disappointed seeing this SLOW top-bar with options to set brightness, zooming utilitly and so on. Therefore I decided to update whole packet of TOSHIBA software and installed "Value package" form Toshiba America site (better downloading transfers).

Since then top bar is reacting very fast but notification given by pressing [Fn] key + e.g. F6 has gone! I cannot set brightness using my fav. FN combinations.

May you give me some clue what could be wrong?

Thank's in advance,
Greetings.

Answer:Satellite A200: TOSHIBA Value Package - "Fn" notification don't work

Hello

The same notebook here! You are absolutely right. With ?factory settings? those flash card move very slow. This is solved with latest VAP version. Before you install new version remove the old one from the system.

One more thing: please use downloads from European site only if you have a European notebook model. I agree with you that download is pretty slow but we do not have other choice.

When you download VAP be sure you install the right version (no button model, 3 button model or 6 button model).

11 more replies
Relevance 86.1%

Hi,

I have a Satellite A200-1ZF with Vista installed originally.
I removed Vista and install XP. And then installed all drivers and almost everything is working but those keys (power,www,mediaplayer,play,stop,back,next) on the upside of notebook don't work. :/

Only power work properly ...sometimes www and mediaplayer, but rest of it doesn,t work at all.
I have Windows Media Player 9 series. I don't know if it is problem with my drivers or windows media version or something else..

please help..

Answer:Re: Satellite A200-1ZF Win XP & Toshiba Control buttons don't work

Hi


Satellite A200-1ZF belongs to the PSAE6E series.
Choose this series in the Toshiba European driver download form.

There you will find a XP BIOS. If you are using Win XP on this notebook then you have to update the BIOS to the XP version!
Furthermore you have to install the Toshiba Controls v. 2.48.2.2C.

This tool is needed to get the Toshiba Media buttons working!

Bye

1 more replies
Relevance 85.69%

How can I turn off mini scrollbar when scroll using two finger in synaptics touch pad? It is very irritating even when I finished scrolling and want to move cursor to another place, it sposmadically continue scrolling  frequently.

More replies
Relevance 85.28%

Hi,

Mine is a Satellite L20-100 Laptop. My touch pad scrolling (the page scrolls automatically when u drag ur finger up & down at the right edge of the touch pad) doesnt work for Mozilla Firefox browser. It works fine with other applications like windows explorer, microsoft word. When i try to scroll in Firefox browser window, it doesnt schroll at all. Please can someone help me??.

Regards,
Anish

Answer:Satellite L20-100 Touch Pad Scrolling doesnt work for Mozilla Firefox

Hi,

Read this on Firefox forum:

http://forums.mozillazine.org/viewtopic.php?t=221466

If it doesn't help you, post your problem there

Message was edited by: Jeka-??

4 more replies
Relevance 83.64%

i'm using windows 7 and have installed version 16.1.6.0 drivers for synaptics touchpad.

i want to enable chiral scroll motion, as well as to adjust the sensitivity for the touchpad, as the cursor keeps jumping jumping around when i type, making me keep having to correct gibberish.

i know this version of the drivers supports chiral scroll, multi-touch, and other adjustments to touchpad function, but when i pull up the device settings for the "PS/2 mouse port compatible touchpad", the only menu options it shows are "overview" and "buttons", which only contain the patent notices and button actions. but otherwise, there is no way to change the functionality of the mouse at all. none of the usual menu options are there.

i've reinstalled the drivers, tried other versions, and rebooted a million times, and nothing seems to help. i know the capability is there, but i just can't access it for some reason...

any suggestions would be greatly appreciated. it's impossible for me to get anything done like this.

thanks so much!!

tamara

P.S. this is a new netbook (acer 722) to replace my old acer aspire (1450, i think). it originally came with elan touchpad drivers, but i had the hard drive switched out for my old one and new drivers installed. it works fine otherwise, but maybe this has something to do with the problem... thanks again for any help!! :)

Answer:problem enabling chiral scroll and other multi-touch functions on synaptics touchpad

oh and i forgot to add that it currently will do two-finger scrolling. just not chiral, which i prefer. not sure if this is relevant, though it does mean that at least some other multi-touch gestures work fine.

1 more replies
Relevance 83.23%

I upgraded my 8 month old Toshiba Satellite laptop to Windows 10 and now I can't use the touch pad to move the cursor. The arrows work, but only allow me to go up and down the menu screen. I can't do anything. Ive tried restarting my laptop, but that doesn't help. So, it has rendered my laptop useless. How can I get my laptop to qork. I was able to use the keyboard to log into my side of the comouter, but that's it. Please help!

More replies
Relevance 81.59%

Toshiba released an updated Synaptics touch pad driver yesterday that fixed my scrolling issues:

http://support.toshiba.com/support/v...tentId=4002846

I had 2-finger scroll but not 1-finger scroll. I tried a solution of adding a DWORD to the registry that did not work (and I won't repost here since it didn't work).

The file is 168 MB so...it may take awhile to download. A reboot is required.

Good luck,
John in Texas

More replies
Relevance 78.72%

Hi,

I have developed a problem with the Snaptics touch pad on my Satellite A200. Despite using various versions of the driver (original, latest from Synaptics) an intermittent problem with the right button has shown up.

Sometimes the green light on the icon in the system tray stays lit permanently (as if it is continuously being pressed).

Often on login the touchpad seems to be 'backwards' - tap click = right click action.

Could it be something physically wrong with the touchpad?

TIA,

Ross

Answer:Satellite A200- Synaptics Tuoch pad problem

To be honest I didn?t notice similar touchpad issues on any of my Satellite notebooks.
Of course, from time to time my touchpad icon appears green because I put my fingers/hand accidentally on the touch area. But this is rare and to be honest I don?t think that this could be the same reason for your touchpad issue ;)

I?ve got some questions;
Do you use an external USB mouse?
Did you install any mouse drivers?

I ask it because sometimes a 3rd party mouse driver could affect the touchpad functionality.

At the other hand we should reckon that this issue could be related to a hardware issue too.
If this is a hardware issue then a technician should check the notebook?s touchpad functionality and should replace the faulty part if necessary.

Best regards

3 more replies
Relevance 76.26%

Hey,

I received a notification of an upgrade on the synaptics touch pad installed on my A200-1m4 notebook and after installing it the touchpad wouldn't respond well, so I rolled back the driver, but it wouldn't use the scroll option. I reinstalled the driver again, but still I couldn't use the scroll function.

On the icon in the taskbar, when I want to see the pressue graph accessory it gives me this msg *Sorry, this program requires a Synaptics TouchPad and the Synaptics Pointing Device Driver* I believe I am missing the second one, so can anyone let me know where I can find the installation file for it.

Thanks Very much in advance,
Leen

Answer:Synaptics Touchpad and Pointing Device Driver missing on Satellite A200?

Hi

This Satellite A200-1M4 belongs to the PSAE0E series and you have to choose this series number for a driver download.

On the Toshiba European driver page you can find the *Alps Electric Touch Pad driver*. (This driver allows you to set the properties and functions for mouse control) and
the *Synaptics Touch Pad driver* (This driver allows you to set the properties and functions for Touch Pad control).

Both must be installed!!!

If this doesn?t help then try to roll back the OS to the early time point (before you have updated the driver for the first time)

Bye

3 more replies
Relevance 76.26%

After upgrading the RAM on my Envy 15 notebook my Synaptics PS/2 Port Touchpad does not work at all. The device does not show up on device manager, and under system information I get an error code that says "This device is not present, is not working properly, or does not have all its drivers installed." I am not sure what the issue is, but in order to access the primary ram card on an Envy 15 you have to disconnect the keyboard/touchpad assembly from the motherboard. However, I have made sure that the touchpad cable is connected securely, and all other features (keyboard, led lights) all work fine. How do I go about troubleshooting this? Thank you.

System Info:
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 8182 Mb
Graphics Card: ATI Mobility Radeon HD 5830 Series, 1024 Mb
Hard Drives: C: Total - 461450 MB, Free - 175196 MB; D: Total - 15184 MB, Free - 2497 MB; E: Total - 99 MB, Free - 92 MB;
Motherboard: Hewlett-Packard, 1522, 36.35, CNF0341RDB
 

Answer:Synaptics Touch Pad does not work after installing new ram

Re-check the internal connections for the touchpad. As it's had to be disconnected to access the RAM slots (a ridiculous design flaw in my opinion) I can't help thinking it has to be a connection issue, especially as Windows doesn't even acknowledge it's presence in Device Manager.
 

2 more replies
Relevance 76.26%

Hello! I've just installed Windows 7 Professional on my HP 350 G1.  I have a problem with touch pad - it works, but just as mouse (and also installed as mouse). I've tried to update and downloaded synaptics driver, but it failed to be installed. I can't delete previous version of Synaptic driver and installed a new one, because it's not in Programmes list at all.  Windows Update doesn't work as weel, if it's relevant.

Answer:Synaptics touch pad doesn't work

 Hi, Install the driver from the device manufacturerhttp://drivers.synaptics.com/Synaptics_v17_0_19_C_XP32_Vista32_Win7-32_XP64_Vista64_Win7-64_Acme_Inc...

2 more replies
Relevance 75.44%

hello,

I have a little problem with touchpad after upgrade my OS to Win7 (x86 32bit).
Scrolling with newest drivers for Win7 from Toshiba and Synaptics doesnt works good.

driver version 14.0.3.0 (2009-08-27) Toshiba A200 PSAE3E

Anybody have a solution ?

best regards

Answer:TouchPad does not scroll using Win 7 on Satellite A200 PSAE3E

Hi

> scrolling with newest drivers for Win7 from Toshiba and Synaptics doesnt works good.
Does this means that scrolling function is available after the installation of Win 7?

Hmm? for me it sounds like you would need to configure this touchpad function.
You can do this in control panel -> mouse -> device settings
There should be an additional tab containing all the touchpad options?

There you could change and increase the touch area which is needed for scrolling and similar? you could increase the sensitivity too?

Greets

5 more replies
Relevance 75.03%

i installed win7 days ago, but any driver of sony can fix the scroll of my touchpad, some help please!

Answer:scroll of touchpad doesnt work win7

Welcome!

Try this driver: Sony eSupport - VGN-FW280FY - Actualizaci?n de Software y Controladores

Good luck!

~JK

3 more replies
Relevance 74.62%

hi guys

i bought this a while back
Packard Bell EasyNote TE11HC review | Expert Reviews

default windows 8, i couldnt get on with windows 8 unfortunately then it went totally crazy so i installed a copy of windows 7 ultimate x64
with windows 8 my mouse pad was awesome, swipe pinch zoom two finger scroll etc.

now with windows 7 nothing, not even the side scroll section of the pad works just normal mouse navigation and button clicks

ive installed every driver under the sun ALL of them, old, new, windows 8, windows 7, 32bit, 64bit,
when i install synaptics it says its a regular ps2 mouse and pad no settings for multi touch

im not a total noob so i went through all the stuff i know and checked forums even downloaded gesture suite which couldnt intall due to errors, then cant uninstall synaptics drivers with revo uninstaller due to some dll error so uninstalled with device manager and deleted the registry entries with revo, but when i reboot windows auto installs drivers

i even went to settle with two finger scroll app, and that came with error no touchpad, but i must have a touch pad because it worked with windows 8
basically i cant get it to work, lol, cant take it anymore! how can i fix it chaps???

all of the drivers are working fine

ive honestly got all of the drivers 10/15 different drivers

Answer:Cannot get multi touch gestures or scrolling to work on synaptics pad

yeah so i'm stupid, there was a link underneath my post regarding harware IDS, i googled my hardware code ACPI EDE0500 somthing like that, first result was elantech, sooooo wasnt synaptics all that time, which is annoying because the software on windows 8 im sure said synaptics anywhoo, elantech for you folk out there who are silly like me

works fine now

1 more replies
Relevance 73.8%

Hi

My A200 told me that I needed to update the drivers for my touchpad. I did so and now I can't use the vertical scroll feature. I have looked on the Synaptic website and there is nothing there to help. I have checked to see if I have the most up to date drivers and I do, and I have looked through the mouse settings and can't find anything that will help.

Can anyone please help me?

Many thanks
Ian

Answer:Satellite Pro A200 - Vertical scroll on touchpad not working after update

Hi Ian

Why you don?t try to roll back the OS to the early time point?
I mean the OS point before you have installed the touchpad driver?

Usually this should helps to get back the early touchpad functions?.

Best regards

1 more replies
Relevance 73.8%

Having removed Vista and installed XP Pro I now find I can't adjust screen brightness (F6 & F7) - HELP Please!!

(also touchpad scroll no longer works??)

Answer:Satellite A200-26D: Installed XP & can't change screen brilliance or scroll

Maybe you should update the BIOS to the XP version an then you should reinstall all available Toshiba drivers and tools again.

2 more replies
Relevance 73.8%

Hello,

My Satellite A200-1BJ doesnt start. After switching button on it starts only for 1 or 2 seconds (LED blinking, HDD working, fan working, display blank) and then it automatically switches off. Once it happened before several days but I had not time to solve it and during next days it did not occur. Now I tried to start it more than twenty times and it still doesnt start.

I tried it only with full battery and also only with power adapter. I removed HDD, RAMs, keyboard, DVD, speakers, display and some other connector under the keyboard and it still doesnt start and everytime after 1-2 seconds it goes off.

In previous months it sometimes went off because of overheating during working so I cleaned it from dust inside.

Any problem with motherboard or power?

Thanks for help.

Answer:Satellite A200-1BJ doesnt start

Hmmm...on this virtual way it is not easy to say what the problem is. described behaviour is the same as in case when the BIOS is screwed up after failed BIOS update installation.

Of course it is ?mainboard problem? but what exactly, it is not easy to say. For me it sounds like defective BIOS.

Have you installed some updates or anything that can be responsible for this?

6 more replies
Relevance 72.98%

The driver is updated, the touchpad works normally most of the time, but from time to time (quite often) the vertical scroll (the bar on the right side of touchpad) stops reacting and it's impossible to scroll vertically. After a while it reactivates again and works normally again...

What's the issue?

Answer:Satellite A200-14D: touchpad vertical scroll stops working periodically

Who knows why this happen? :)
It will be nice to have answer to such ?periodical? issues.

Have you tried to play a little bit with Virtual Scrolling settings?
Try to change scrolling region. Try to expand it a little bit.

1 more replies
Relevance 72.98%

Most laptop let me fit my Memory Stick Pro DUO inside the laptop but not this one, it can?t reach it so I tried putting the Memory Stick Pro DUO in one of those Memory Stick DUO Adapter that come with it and although it does connect, nothing happens...

What is this? Why can?t my laptop not recognize it? Doesn?t it support it?

Answer:Memory Stick Pro DUO doesnt go in my Satellite A200-1H2

Hi

I do not know what you mean with ?most of the laptops? but it is logic that every notebook producer offers exact specification where you can read about compatible memory cards that can be used with ?multi card reader?.

Have you checked User?s manuals document for your Satellite A200? I do not think so.

2 more replies
Relevance 72.98%

I've just bought a lenovo Z50-70 and have no idea how to scroll...

More replies
Relevance 72.57%

Hello all! I am new here and I need your help so much. Earlier I had some problems with non working polish signs like ć, ź, ż, but that was BIOS problem and has be solved with the upgrade to 2.0 version. So now - like in the title - other issues are there.
1. I can change modes between wifi and flight one, but its indicator is still shine (in the flight mode too) and never gonna turn off.
2. I cant make upercase of "B" letter - shift works properly. I can write other letters uppercase.
3. Combination ctrl+alt+del doesnt work (Win8.1)

Thanks in advance for your help.

Greetings,
Damien

Answer:Satellite L50-B - wifi indicator doesnt turn off and doesnt work Uppercase B

Hello Damien

Really strange issues.
Do you use original preinstalled OS that you got with your machine?

I mean all listed issues are really strange and I would like to know if they exist for long period of time or have you noticed all of them few days ago. Especially issue with WLAN is a bit confusing.

3 more replies
Relevance 72.16%

I just downloaded windows 10 today everything was going good until I wanted to scroll down but it didnt work or when I wanted to click using my touch pad didnt work also so i went back to windows 7. I have a Gateway laptop its only 3 years old.

Answer:My touch-pad doesn't work or scroll for Windows 10?

Same for me :( any ideas to fix it?

3 more replies
Relevance 72.16%

I am using a Surface Pro (original). Some web pages will not scroll with touch, including the Bing search results page. To scroll, I must use the stylus to create and manipulate a vertical scrollbar for these pages or connect the keyboard and use page up/down. I believe that this behavior has just begun with the Bing search results tab, but has been ongoing for some other pages. Other web pages in other tabs in the same Edge instance work fine.
Any suggestions?

More replies
Relevance 70.93%

Hello, have a Satellite A200-13O, I got him a USB mouse, and when it's connected I no longer need he TouchPad.
So I try to turn it off by FN+F9 but that doesn't work.

Any idea? I really need to solve this.

Thank you very much for your help.
Aviad.

Answer:Can not disable Touch pad on Satellite A200-13O

Hello

Is your notebook preinstalled with Toshiba recovery image or you have installed your own operating system?

2 more replies
Relevance 70.93%

Please can anyone tell me why I can no longer scroll using the edge of the touch pad.
This seems to have occurred since I had to reinstall Vista following a problem with some faulty Ram.

Thanks

Answer:Satellite P series - I can no longer scroll using edge of the touch pad

Hi

One reason can be a missing touchpad driver.
But if the touchpad driver has been installed, then you should check the settings of the touchpad.

In control panel -> mouse you will find the touchpad properties. It should be the last tab.
There you can check enable and disable and configure many options.

Cheers

1 more replies
Relevance 70.52%

My laptop has a VGA port and an S-video. Could you help me how and what to buy to enable me connect my laptop to a TV [SONY, a/v RCA connection] to optimize multimedia features.
 

Answer:Toshiba Satellite A200-10W

Hi there, if what you are trying to do is get video going from your laptops S-VIDEO out into your TVs RCA input (Yellow), then I suggest you get one of these adaptors that can be found cheap at most AV related stores. Here in Australia you could get something like this: http://www.dse.com.au/cgi-bin/dse.storefront/4922a2b300c49ab62740c0a87e0106eb/Product/View/C0008

If you need more help on how to set it up I can help.
 

3 more replies
Relevance 70.52%

OK Guys!
Please forgive me if this topic was posted before, as far as I know, the exact model I'm talking about doesn't have a relevant topic here.

Toshiba Satellite A200 Laptop
I CAN'T FIND XP DRIVERS!
I really can't believe it, why are they doing this? Is it a marketing policy? They want Vista to become popular? What is this?

I'm fed up with searching the Internet and Toshiba websites, I still can't find what I need. I found LAN, WiFi, Bluetooth, and other tools but I can't find audio or VGA drivers.

Is this a general problem or am I the only one facing it?

I really need your help.

Amjad!
:cry
 

Answer:Toshiba Satellite A200 - Please Help

You and everybody else that wants to go from vista back to xp, the hardware in the vista configured pc is designed for the vista drivers, in most cases drivers wont be available. ed
 

2 more replies
Relevance 70.52%

Hey Guys/Girls, im in need of some help....

So last night I swapped my brand new laptop for 2 other laptops, one of which is a TOSHIBA SATELLITE A200,

Sooo when I turn it on it first shows a loading screen saying "WINDOWS IS LOADING FILES"
I then get the normal VISTA loading screen, once it finishes loading that is it, it goes to a black screen with the cursor on it and it just stays at that.

I then tried to install VISTA again but I still get the same start up rather then going into the installation setup thing.

I TRIED installing WINDOWS XP and then a message pops up saying that "SETUP DID NOT FIND ANY HARD DISK DRIVES INSTALLED ON YOUR COMPUTER"
"but it does show the hard drive in the BIOS"
I also Plugged in a Blank Hard drive and tried to install XP yet the same message again

Please help as I am absolutely stumped on this one
 

Answer:Toshiba Satellite A200 :/

The 'windows is loading files' comes from a setup of the operating System, and will normally be followed by a reboot and the continuing installation of windows. As part of that process, you would normally get the installation of the video drivers and other motherboard drivers. This is currently not happening for you. So wherever these files that are 'loading' came from, they don't seem to have included correct driver files for the Toshiba.

The 'setup did not find any hard drives' message comes from an install of XP, but the hard drive is not found because XP does not understand SATA drives. The way round that problem is to enter the bios and set the hard drive to an IDE compatible mode, or to supply XP with a SATA driver, which is done early in the installation process, but is not easy on a portable.

In summary, your Toshiba does not have any Operating System at the moment, and you need to start from a Windows retail install CD or DVD. You also need the correct set of driver files for the Toshiba model.

Usually, portables are supplied with an OS already installed, and there is no supplied OS install disk - just a process where you can initialise an install from a hidden setup partition on the hard drive. Have a read of the manual on Toshiba's website. It's just possible that the hidden setup is still there and can be activated.
 

1 more replies
Relevance 70.52%

So i just got my z710 the other day. clone the drive (for a rainy day). Then formated and installed Win7 Pro 64bit. i managed to get everything else in working order except i would like to occasionally turn off the touchpad. i use a mouse for games and such and the hot key doesnt work to turn it off. BTW every other hot key does what its intended to do. Any Suggestions???













Solved!

Go to Solution.

Answer:z710 Touch Pad Hot Key doesnt work...

hi vildhjarta13,
 
Welcome to Lenovo Community Forums!
 
Please try installing this Driver and try the  Fn again to turn off the touchpad.
   Extract and Install the file.
 
 
Let me know your findigs
Cheers!
 





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Relevance 70.52%

I'm having a similar problem, only this one is self inflicted.

I have a brand new Toshiba Satellite A215. I just got a new USB mouse to use with it, so I wanted to disable the touch pad (since I kept accidentally touching it and messing up whatever I was doing). Well, after about an hour of wandering through the different settings and such looking for the touch pad's disabling option, I found it. Completely by accident, as I was about to give up.

Here's my problem: I forgot how I did it.

So now, I'm unable to use the mouse unless I have a usb mouse plugged in. While this isn't a major problem (I'm pretty decent at navigating with just the keyboard), it is getting extremely annoying when I just want to do something simple, or don't have a good surface to use my laser mouse on.

I'm running windows vista home premium. Anyone who can help, I would appreciate it very much.
 

Answer:LAPTOP HELP PLEASE. touch pad doesnt work.

sephiroththepure said:





I'm having a similar problem, only this one is self inflicted.

I have a brand new Toshiba Satellite A215. I just got a new USB mouse to use with it, so I wanted to disable the touch pad (since I kept accidentally touching it and messing up whatever I was doing). Well, after about an hour of wandering through the different settings and such looking for the touch pad's disabling option, I found it. Completely by accident, as I was about to give up.

Here's my problem: I forgot how I did it.

So now, I'm unable to use the mouse unless I have a usb mouse plugged in. While this isn't a major problem (I'm pretty decent at navigating with just the keyboard), it is getting extremely annoying when I just want to do something simple, or don't have a good surface to use my laser mouse on.

I'm running windows vista home premium. Anyone who can help, I would appreciate it very much.Click to expand...

Hi. Welcome to MGs.

Just for future reference, you should start a new thread when you have a question you need answered rather than posting it in one someone else started.

As far as your mouse, you should be able to go into your control panel and click on the mouse icon to access your touchpad controls.
 

5 more replies
Relevance 70.52%

so i bought this x61 tablet from a website like www.woot.com that sells one random item for super cheap, each day. anyways i got this laptop and i cant get the touch or the pen to work. flip the screen into tablet mode and nothing. nothing in slate mode either. i tried to then go into the control panel and calibrate it. nothing. i have no idea what to do from here. the o/s is windows 7 if that helps. also it has none of the thinkvantage programs on it either so ill have to put all those on. wondering if that might be the problem?

Answer:x61 tablet touch/pen doesnt work

I don't know much about tablets but there is multitouch , tablet button driver & other software on the lenovo site for the x61 http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-68009





_______________________________Thinkpad R61 7733-1GUThinkpad X61T 7762-54UThinkpad X60T 6363-4GU_______________________________Did a member help you today? Thank them with a Kudo!If a post answers your question, please mark it as an "Accepted Solution"!Regards,GMAC

9 more replies
Relevance 70.52%

Hello i have a quite new laptop with Wins 8.1. I noticed the other day when it starts up after a short while the touch pad no longer works the cursor remains fixed. But when i put a USB mouse to the laptop the cursor works fine. But when i go back to the touch pad the cursor wont move. Does anyone have any idea what might be causing this? Hope for some help thanks.

Answer:Laptop Touch pad Doesnt work

something is conflicting with the touch pad drivers
earlier on this site someone found that Winamp was causing the conflict.

4 more replies
Relevance 70.52%

i cant get my touch pad to work on my laptop. my faggot little sister got on my brand new toshiba satellite A75 and some things came up and now the touch pad doesnt work. i rebooted the entire system but it still doesnt work. need help.
 

Answer:LAPTOP HELP PLEASE. touch pad doesnt work.

alex2053312 said:



i cant get my touch pad to work on my laptop. my faggot little sister got on my brand new toshiba satellite A75 and some things came up and now the touch pad doesnt work. i rebooted the entire system but it still doesnt work. need help.Click to expand...

Hi, you really should not call your sister that, but anyhow she might be a real pain so I continue with my suggestions:
What is the make/model of your laptop? Laptops come with a touchpad utility that kicks in during Windows startup, it might also be listed in the services if using Windows 2000 or XP. So the service or the startup entry in the registry might have been deleted (but not the utility itself), the utility might have been disabled or uninstalled. Even a slimmer chance the touchpad functionality might have been disabled in the BIOS settings as most laptop BIOSes do have a related setting.
Depending on your laptop make/model find out what that utility is (from the manual or company's web site), then check the 'Add-Remove Programs' list to see if the program is still installed (you could also check it in START > Programs or All Programs list which is even better). If it is really missing then download the utility or using the laptop's utility CD (if one exists) re-install the program. If it still doesnt work then last step check the BIOS....these are all I can think of for now...
 

3 more replies
Relevance 70.11%

I have rather wired question for you, may be common.
Touchpad on my laptop doesn't work properly, and I was wondering anyone can tell me what' wrong with it. My problem is below,

When I turn on the laptop, i can login to the with the use of touchpad but after I logged in only thing I can move the pointer over the programs but I can't double click or do anything else. When I've double clicked the icons it doesn't do anything.

Therefore, I was thinking that I might have turn off something by mistake, as I can use the touch pad to login.

Can anyone please tell me how to fix this problem or do I have to take it to a service centre?

Answer:Touch Pad is not working properly in Satellite A200

Hi

If you can still move the cursor using the touchpad then the touchpad is not disabled.
Maybe one button configuration has been changed?.

Usually you can configure the touchpad in the touchpad settings.
Did you check this?

You can find the settings in control panel -> mouse
There should be an tab called Advanced.
Go there and check the advanced feature settings.

There you can configure the single buttons and also the touchpad.

If you will be not able to reach these settings then I would recommend reinstalling the touchpad driver again!

Bye

4 more replies
Relevance 69.7%

Hi,

I've been working on a friends A200-AHC308. It had a few viruses and was currently running XP, so I decided to reformat to XP-SP3. Prior to the reformat I attempted to back up all of his files to a USB flash drive, although the computer had problems recognizing the USB. I figured that the problem may have had something to do with a faulty driver installation so ignored it and continued with the format, having backed up his files on a DVD. After the reformat I am still having the same issue. All drivers are installed properly and nothing in Device Manager is popping up with a question mark. What happens is this: I plug the media in (whether it be an external HDD or a flashdrive) and the computer goes through its device wizard. It does one of two things:
Says the device was installed successfully although when attempting to access it through My Computer the drive does not load (it is present, although when attempting to open it I have no luck).
Says the device is not compatible.

Anyone?
 

Answer:Toshiba Satellite A200 USB Issue

If you have a second USB flash drive available, plug it into the Toshiba and see if you can read from/write to it.

If you can, it's likely the drive you backed the data up on is either going bad or was corrupted by the virus(es). If this is the case, any attempt at recovering the data should be done with extreme caution. If inserted into and accessed from another PC there is a good chance it will infect it. Go to the virus and malware section of the board for specific scanning and cleaning tips for the drive before you attempt to open or transfer any data from it.

If the second (clean) USB drive doesn't work, reboot the PC with the USB drive removed and try again. If it still fails, go to http://fixitcenter.support.microsoft.com/Portal and download the Beta version of Microsoft's Fix-It Tool. XP SP3 had a few bugs; this tool fixes many of them.

Hope this helps.
 

8 more replies
Relevance 69.7%

Where do I find drivers and BIOS update for my older Satellite A200-10W for Win 7 32 and for Win 7 64?

I did not find support by entering the serial number on assistance Toshiba
Thx.

More replies
Relevance 69.7%

i was having issues with a blue screen having the error nv4_disp. I uninstalled the video driver but forgot to note down the model.

I am using Xp pro service pack 3
I downloaded GeForce ForceWare 180.60 XP (32-bit) but everytime it says
"The NVIDIA setup program could not locate any drivers that are compatible with your current hardware."

I think that that my video card is Geforce GO 7200
 

Answer:Toshiba Satellite A200 PSAFCA

Try this driver. It supports most Geforce Go chipsets, including the 7200. I looked around at Toshiba but couldn't find any NVidia drivers for WinXP. Maybe if you posted the full model; Toshiba model numbers usually look like A205-S4537 for example. An Everest report attached to a future post might help too:




Use Everest to get a report of your system?s hardware, OS, and drivers. Upload the report as an attachment
Everest: http://www.majorgeeks.com/download.php?det=4181
When Everest is done scanning, click "Report" at the top of the Everest window, click next to get to "Report Profile", select "Hardware related pages", click next, select "Plain Text", click "Finish". Then when it is done processing, click "Save To File". Save it where you want to. (I would use Desktop.)
Click "Go Advanced" in the MG reply box, scroll down a little way until you see "Manage Attachments", click it, browse to your file, click "Upload", and close the window. Then submit the post. You may have to also type something in the reply box, like, "Here's my report.", so that it will submit.Click to expand...

(above instructions originally posted by MG member musksnipe... thanks muskie!)
 

1 more replies
Relevance 69.7%

Hi,
Fisrtival, I'm from Poland so sorry for my english:)
Secundary,
I bought a Toshiba Satellite A200-1ZF Notebook with Windows Vista.
I have to work on AutoCad and some programs cooperating with AutoCad. These programs aren't working on Vista so I really would like to have a good old Xp System:) I have already integrate a Sata driver for HardDrive with my Xp installation cd. It installed greate but after the installation the CD-Rom disapeared from My Computer. Some Hardware was installed it self but some not. I had searched a lot of web pages with drivers,support e.t.c but i haven't found anything what was needed:/ For example ATI Mobility Radeon HD 2600 or Realtek HD Audio. I'd be really thankfull if someone could help me.
I don't know meybe there is somewhere a driver pack for my Toshiba for WinXP? As At Toshiba website support as at Intel i haven't found it.
Please help me.
Thanks for all help

Answer:Vista to XP (Toshiba Satellite A200-1ZF)

Can't verify the drivers, but found a post on another forum where a guy had the same driver problems with an A200. He finally found them and put them together and has them posted. Hope this helps.
http://www.zofodraz.com/toshiba/

There are a bunch more sites, but they aren't in english. I can muddle through a bit of french, but that's about it.

5 more replies
Relevance 69.7%

i hope anyone can give me a solution.............. if i play games i dont use the touch pad... but i do use the keyboard.... i would like to turn it off but the function keys wont work................ the other keys seems to be ok.... any suggestion?

Answer:my function key to lock my touch pad doesnt work

 
Hi
 
Welcome To Lenovo Community
 
We are really sorry to hear about the issue you are facing,  
Based from what i read in your post, seems like your hotkey drivers are not working
Please try installing Lenovo Energy Management drivers from the support website
Restart the system and check
 
 
Do give this a try and let us know  
 
 
 
Hope This Helps
Cheers!!!
 
 
 
------------------------------------------------------------------------------------------------------------------------------------------------------------WW Social Media Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!How to send a private message? --> Check out this article.
English Community   Deutsche Community   Comunidad en Espaol
 

1 more replies
Relevance 69.29%

Hi guys,

i've a problem with my touch pad. my notebook is Satellite L50-A-1D6.
Often the touch stop work when i use multi touch gestures, and few second later it starts working again.

But sometimes it stop works and i've to restar the pc.
I thinks it's a driver problem, but i reinstalled driver, i hard reset my pc but nothing.
If use the pc without synaptics drivers it's all ok but i can't use multitouch gestures.

Do you have any ideas?

Sorry for my english

thanks you bye

Answer:Satellite L50-A-1D6: Synaptics touchpad does not work often

I'd be interested in a fix too...
I have a Satellite L855-149, and sometimes when I use multitouch gestures the touchpad doesn't work. I can still click with the buttons though.

It's quite annoying, it can take around 30 seconds before I can use it again.

11 more replies
Relevance 69.29%

I had a problem with my hard drive not working this just happened over night so I replaced the hard drive no problem and rebooted the system.
All is ok but the touch pad will not work.
I have tried FN+F9 this is ok I have updated the touch pad program still not working.

Please HELP!!!

Answer:Equium A200-1VO - touch pad doesn't work but external mouse does

XP or Vista?

Did you use a Toshiba Recovery disc to install Windows? Or a generic street version of Windows?

Maybe you need to go to the Toshiba website and download some drivers.

4 more replies
Relevance 68.88%

Hello everyone
I have a second hand Toshiba satellite A200 that will not load into windows. It just goes into installing update 3 of 3 and restarts. I have tried safe mode but it just gets to \Windows\system32\drivers\crcdisk.sys and stops there. I really need some help because this is the computer Inuse for retrieving video from my model plane
Cheers,
hman

Answer:Update not loading Toshiba satellite A200

In order to fix a problem like this you would need a Vista Install Disk? Then do a startup repair or System Restore. If you do not have a install disk you can get the files off the drive with either a linux distro like Puppy or a WinPE disk you can build on a Windows 7 computer. After that you may be able to do a factory reset.
 
You can also follow the steps here to create a Vista Install iso.

5 more replies
Relevance 68.88%

Hi guys,

got a toshiba satellite pro a200 when i power it up it just goes straight to a white screen
i have reseated the memory one at a time and also reseated the hard drive
but it still does the same

any ideas?
 

Answer:Toshiba satellite A200 just white screen

6 more replies
Relevance 68.88%

Hi,

I installed Tempro V1.2 on a satellite A200. Tempro tell me that I have 12 alerts but when I click at description of the alert,
I have in french an error message witch tell me that tempro stopped: 'Tempro a cess de fonctionner).

Have you an idea to resolve this problem?

Regards.

Answer:Toshiba tempro has stopped on Satellite A200

Maybe you should remove the Tempro software firstly, and then should clean the OS using the CCleaner and then you should install the new Tempro software on your system.

But just one hint: the Tempro sends only a message to you if a new driver or tool was uploaded on the Toshiba driver page.
In my opinion it?s not really necessary? it runs always in the OS background and needs hardware recourses? I had this tool but I removed it from the OS.

Greets

2 more replies
Relevance 68.88%

Hi there, I have a Toshiba Satellite A200 and just today I've encountered a frustrating problem. Let's just get a few things out first.

I had intended to turn it off last night, but it didn't shut down. There was some message about a program still opened or something like that (not a big deal I thought as I had gotten it a few times before). I just clicked whatever it was that ended it or turned it off anyways. So today I come back to turn it on and it was on that message. I turn it off and come back later to turn it on. I noticed there was a black screen and I could not do anything. I hold the power button to turn it off and restart it. It loads the Toshiba/Phoenix screen fine. Then I get to the Windows Recovery screen. It gives me two options.

- Use the Windows Recovery thing to try to find and repair any errors
- Start Windows normally

I tried the first option a few times but it said there was an unspecified problem due possibly to some hardware configurations (did not do anything before). I restarted and pressed F2 and looked for anything that might have caused it and I exited without saving any changes (Toshiba/Phoenix thing) and then it led me to the screen with the Safe Mode and other options. I chose Safe Mode just to see and it led me to the log-in screen, but after that it would not let me see those same options again. Anyways, I would start normally and at the loading screen, the bar would load but there is no Vista logo. After that, there's ... Read more

Answer:Toshiba Satellite A200 - Black Screen

insert your windows recovery disk restart the computer then go to system recovery/ repair windows or something similar and have that run, DONT INSTALL WINDOWS! Unless you like loosing your files and re-installing windows vista
 

1 more replies
Relevance 68.88%

The PC's lights turn on. The fan goes, but the laptop has a black(dead) screen
 

Answer:toshiba satellite a200 dead screen

Try connecting a monitor to it if you have one, and press Fn + F5. If you get a display then there is something wrong with the internal display. If no display, something else is wrong.
 

2 more replies
Relevance 68.88%

(Sorry if my english is actually bad) Hello all, Im here looking for some help, because this is the first time that happens to me since i got my laptop, and i already did a lot of formatation on my laptop before but this never happen... Everything goes normal until the point that opens two windows:

1

Waiting for ODD to become available ...
ODD Drive E: ready.
Check for medium in drive E: ...
Continue...
Failed to initialize the raid class.
No RAID - continue normally...
Installation in progress...
Press any key to continue. . .

2

Checking for HDD1
HDD1 not found!
Try to remove all letters from potencial partations on HDD 0 . . .

(Everytime that i reach to this part i just needed to press Enter and the formatation would start normally, but now that i press Enter to start, the only thing that appears on the FIRST page is: X:\windows\system32>)

If someone could help me would be great because i tried everything and nothing worked

Thanks for your attention.

(And i have the Recuperation Disk)
 

More replies
Relevance 68.88%

Hi

I have Toshiba notbook model (Satellite A200-130) but i can't find it within toshiba products.
Can any one know why this model nor present with toshiba products?

Thanks

Answer:Why is Satellite A200-130 not present in Toshiba products

Hi

I think you have mistyped simply.
It?s not a Satellite A200-130 but Satellite A200-13O ;)

The Satellite A200-13O is definitely a Toshiba product.

You can find this here:

http://eu.computers.toshiba-europe.com -> Laptops ?> Satellite - for the home

There you will find all new available Satellite series.
Choose Satellite A200 series and press the button ?View all models?.

The Satellite A200-13O will appear as a last model in the list.


Cheers

3 more replies
Relevance 68.88%

Hi

I've got an A200-28P with an ATI HD2600 card in it and the July 08 driver version 8.452 on it,
Now I emailed ATI and asked if there was anyway they could provide Toshiba with the driver that fixes a known issue in the Sims 2 game where the ATI 2,3 and 4000 series cards suffer a black screen on TV and the PC has no picture.

And they basically told me that they can't offer me an updated driver and there are ways of getting newer drivers but that its up to my laptop maunfacturer to ask for the latest drivers as people with desktops with any of the affected cards have all had a driver update to fix the issue and the makers of the game provided a fix in a patch for one of the expansion packs that I don't own.

So unless I risk letting a copy program called Securom onto my laptop I can't get my black screen issue fixed am used to it now but when feel well enough to play on desktop is fun to see the TV programmes and the PC pictures so seems unfair my laptop can't have a newer updated driver with a fix in it.

Does anybody know who I'd have to contact at Toshiba to ask about asking ATI for a driver with a fix in it for this known issue?

Message was edited by: Simreaper Oops spelling mistake

Answer:Re: How do we get Toshiba to ask ATI for newer drivers - Satellite A200-28P

Hi, You can use this tool http://www.driverheaven.net/modtool.php it is DH MOBILITY MODDER, dowload newest drivers from ATI 9.3, and then use this tool to mod them and after that they will work with Your Ati mobility card, I have Toshiba A300 with Ati 3470 and everything works ok. GOOD LUCK :)

2 more replies
Relevance 68.88%

My BIOS is Toshiba v1.8. I'm looking to see if there are any updates.

More replies
Relevance 68.88%

Hello there. I have Toshiba Satellite A200-1m8
OS:Win 7 ultimate 32 bit

after just installing toshiba value added package to get my function keys working, eveytime i hit the FN key alone or along with its related keys
i get a BSOD screen message where it says: IRQL_Less-or-not_equal. and i can see in the bottom of the bsod screen page dump physical memory and a counter or timer.

any help is appreciated.


regards.

Answer:BSOD after installing Toshiba VAP for Win 7 - Satellite A200-1m8

And you have installed THIS version?

10 more replies
Relevance 68.88%

hi Toshiba. Ive been having a problem with my Toshiba that I have had for a few years now. the screen has blacked out and everytime I reboot it it still stays black. I have tried every rebbot type and I have asked a lot of people but none of them work. please help. thanks
Zach Attard

More replies
Relevance 68.88%

Hey all!

I upgraded my laptop with Vista to Windows 7 Professional and ever since then I cannot get access to the touchpad settings at all. I want to turn off the tapping and turn on the scrolling. I have tried installing and uninstalling the device as well as the new the new driver for my symantics touchpad from the symantics website and the recommended driver from the toshiba site but neither has worked.

When I go into device properties and go to change settings the only options I have are to specify the actions the two buttons have.

Totally absolutely frustrated...it should have been an easy fix.

Any suggestions?

Vivian
 

Answer:Solved: Toshiba Satellite A200 touchpad

6 more replies
Relevance 68.88%

Hi there, I have a Toshiba Satellite A200 and I've encountered a frustrating problem. Let's just get a few things out first.

I had intended to turn it off last night, but it didn't shut down. There was some message about a program still opened or something like that (not a big deal I thought as I had gotten it a few times before). I just clicked whatever it was that ended it or turned it off anyways. So today I come back to turn it on and it was on that message. I turn it off and come back later to turn it on. I noticed there was a black screen and I could not do anything. I hold the power button to turn it off and restart it. It loads the Toshiba/Phoenix screen fine. Then I get to the Windows Recovery screen. It gives me two options.

- Use the Windows Recovery thing to try to find and repair any errors
- Start Windows normally

I tried the first option a few times but it said there was an unspecified problem due possibly to some hardware configurations (did not do anything before). I restarted and pressed F2 and looked for anything that might have caused it and I exited without saving any changes (Toshiba/Phoenix thing) and then it led me to the screen with the Safe Mode and other options. I chose Safe Mode just to see and it led me to the log-in screen, but after that it would not let me see those same options again, but I can still get into Safe Mode using F8. Anyways, I would start normally and at the loading screen, the bar would load but there is no Vista logo. After ... Read more

More replies
Relevance 68.88%

On a Toshiba Satellite A200-1FN PSAECE-02600SIT with Windows 7 32 bit fresh installation or "full" installation (win update, drivers, sw) when I press SHUTODWN to shutdown the laptop, the system is go normaly in shutdown. But, after 1-2 seconds he is go back on... It seems that I chose RESTART instead of SHUTDOWN.I also tried to update the BIOS with the version 1.80 available for Vista (for Windows 7 since there is no update).I found that this happens only if the power supply is attached. If the laptop only runs on battery, turns off and remains off without rebooting.Some idea?:(

Answer:Shutdown but Restart (Toshiba Satellite A200)

Possible your power settings, check them all.You have to be a little bit crazy to keep you from going insane.

5 more replies
Relevance 68.88%

Hi.

When I turn on my laptop (Satellite A200) often, but not absolutely everytime, I get a bar across the top of the screen which reads 'Toshiba Flashcards (not responding'.

Sometimes this can be removed by clicking the red cross in the corner of the bar and after a few moments it does disappear, but other times it stays there and there appears to be no way of getting rid of it.

Can anyone help me with this problem?
You can probably tell from this that I am not a computer expert and simple language would be most appreciated!!

Answer:Toshiba flashcards does not respond on Satellite A200

Try this:

Update the BIOS, which can be downloaded from the Toshiba website
Uninstall the Toshiba Value Added Package
Download and install the latest Toshiba Value Added Package from the Toshiba website

1 more replies
Relevance 68.88%

Hoping to find some help on how to change my Toshiba Satellite A200 from Spanish Language to English.

I asked a friend to buy me this notebook from Spain, unknowing to him the OEM came in spanish language and the recovery CD as only is only spanish but i don't understand spanish and i have been finding it difficult to go about the notebook since i don't want to click the wrong thing in spanish.

Even when i install programs, it automatically installs in spanish and this is really frustrating,


Somebody HELP!!!

Answer:Satellite A200 - Cannot change language on Toshiba OEM CD

Your notebook was bought in Spain and therefore the Vista OS is also in Spanish language.
You cannot change it to English without purchasing a new Vista Microsoft disk in English language.

In some cases it could be possible to install an MUI (Multilanguage) package for Vista but this will work only with Vista Ultimate (and Business???)

2 more replies
Relevance 68.88%

So, to begin with I know next to nothign about this laptop. I am repairing for a friend but after a week of trying I am calling out for help.

It won't boot to windows, when I try it gets to a black screen with a mouse cursor and hangs there. I have left it there for 3 hours without any change. hitting shift 5 times does not give me a sticky key option. Safe mode does not work as it gives the same results.

I have tried using the Recovery Discs that he gave me to recover, no dice as well as I tried my own version of Vista and nothing.

I need some ideas.
 

Answer:Toshiba Satellite A200 - Major Issues

Forgot to mention I treid the Windows repair and it ran for close to 6 hours before I turned it off. =\
 

10 more replies
Relevance 68.88%

Here's my problem:Lost my password BIOS. Well to be truth it was my dad...So I'm trying to flash my BIOS from Phoenix.Futhermore I bought new RAM DIMMs (2x2GB from Corsair). And those are giving me BSOD.My searching is near to no results at all for my PC: Toshiba Satellite A200-223.Here are my questions:Knowing WinPhlash or other program (please list it) is any way to flash through Windows, being an Original or Modified BIOS version? It is possible to flash a BIOS with different versions? Example, mine is Satellite A200-223 to another version XXXXXThank you all in advance for helping!!!iacobus

Answer:Flash BIOS Toshiba Satellite A200-223

A BIOS flash will not wipe the password on a laptop...and may render it un-bootable at all if it's the incorrect flash.For BIOS password recovery on laptops it needs to be taken to a Toshiba Service Center to retrieve/reset the password.Be prepared to show proof of ownership as they will ask for it.

4 more replies
Relevance 68.88%

Hi HP Support Greetings from Latin America, we have a HP Pavillion All in one 27-n001la, mainly used by my 5 years old daughter, with all her educative games. Since the upgrade to Windows 10, touch screen is not longer "touch", and we cannot find driver available at the website to solve this issue, which btw, is quite relevant for my daughter as she still doesnt have any control of the mouse. Hope you can help us. Warm Regards from Chile Carolina

More replies
Relevance 68.88%

is there a way to scale the screen contents to small so that i can use the ph0ne with out any problem?,with the bottom 1 cm not working i cant hit the send button or the any menus in my lumia phone, i was suggested to change the disply and its costing me too much, is there a way so that the i can leave the bottom 1 cm and scale the entire contents to fit the screen leaving 1 cm alone.

More replies
Relevance 68.88%

Hello,Recently my brother bought a refurbished x230t type 3437-XE1.Spec: windows 7, processor i7, 8gb ram. Since I tried it today, I was never able to get the finger touch to work (no tablet touch screen function at all), but  the stylus pen seems to work perfectly.Also, the simple tap gesture (double clicking with two fingers on the pad) doesnt seem to work.I dont know whether some settings are not correct or the refurbished product has its faults. Please assist me in how to solve the problems.thank you. 

Answer:x230 tablet finger touch doesnt work since I got it.

leevshan wrote:Hello,Recently my brother bought a refurbished x230t type 3437-XE1.Spec: windows 7, processor i7, 8gb ram. Since I tried it today, I was never able to get the finger touch to work (no tablet touch screen function at all), but  the stylus pen seems to work perfectly.Also, the simple tap gesture (double clicking with two fingers on the pad) doesnt seem to work.I dont know whether some settings are not correct or the refurbished product has its faults. Please assist me in how to solve the problems.thank you. The Gorilla Glass model of the X230t does not offer touch.

2 more replies
Relevance 68.88%

First let me show you the technical details. I have this laptop for 2 years and a half.? Im using this programm to track the temperature on my laptop.And i think what it shows is not healt.I have worries about cpu temperature, cuz it reaches 70 C and i feel the heat.My laptop gets warm very fast even when i dont use anything to put pressure on it.And lately my touchpad doesnt work well, and its slow at all. I mean i should press more than 3 or 4 times so it "catch" and evetually show me the command which i want to use.Do you think that if i use coolpad for my laptop, or its the thermal paste which has to be replaced with new one;My laptop hasnt been opened before.I would like to hear your advices.This is not the only problem which this laptop has but i noticed that wireless and battery problems are kind of common for Z510 series.Thank you for giving your time!   

Answer:Ideapad z 510 , heat problem,touch pad doesnt work...

First let me show you the technical details. I have this laptop for 2 years and a half.? Im using this programm to track the temperature on my laptop.And i think what it shows is not healt.I have worries about cpu temperature, cuz it reaches 70 C and i feel the heat.My laptop gets warm very fast even when i dont use anything to put pressure on it.And lately my touchpad doesnt work well, and its slow at all. I mean i should press more than 3 or 4 times so it "catch" and evetually show me the command which i want to use.Do you think that if i use coolpad for my laptop, or its the thermal paste which has to be replaced with new one;My laptop hasnt been opened before.I would like to hear your advices.This is not the only problem which this laptop has but i noticed that wireless and battery problems are kind of common for Z510 series.Thank you for giving your time!

1 more replies
Relevance 68.88%

I've got a Toshiba Satellite 1800-S204 laptop that won't bootup. It gets power. It seems like the battery charges. When I turn it on the power light comes on and it takes a few minutes and I can hear the processor fan come on. If I hold the power button down, the power button goes off, so it does actually turn on /off. The HDD LED doesn't come on at all, and I hear no HDD activity. The DVD drive doesn't open and doesn't seem like it works. The laptop screen was dark a few months ago and after reseating the inverter board, worked fine. It no longer boots up. It doesn't display anything on an external monitor either (pressing Fn&F5 should toggle displays. No buttons seem to have an effect. The original HDD was having the same problem, so a new one was installed with the same problem. I'm pretty sure it's not a HDD or display problem, but I could be wrong. Can this be related to memory? Or a strange power supply (the original was broken, so i replaced it with a different model with same voltage output)?

I don't know what proc is in it, but I know it had Win2000 Pro on it. One day during a presentation, I got BSOD. After this, it never booted correctly.

Any ideas? I always appreciate the help I get from this board, you'se are always so helpful.

Thanks!
 

Answer:Toshiba Satellite doesnt boot

This new power pack, same current and polarity of the plug?

Could be the RAM, or motherboard. Try reseating the RAM, its usually easy to get to on the bottom.
 

2 more replies
Relevance 68.88%

So I lent my laptop to my daughter until she could get enough to buy a p.c.
Well I've gotten it back only she installed a lot of stuff on to the point where it's chugging on vista even after my attempts to clean it up I decided start the laptop by using the recovery disk creation that came with the laptop.

However now I have used about 8 dvd disks trying to create a good disk but i restart the p. with the disk in .. nothing happens. I try to run it directly through vista...and it says cannot read disk. I have recreated the disk several times and the same result and well this was the only type of recover disk that came with the laptop.]

Also as i have gotten it back when i use the touch pad my cursor is jumping all over the place, is that fixable?

Thanks in advance.

Answer:Satellite A200 recovery disk creation problem + touch pad

Hello

Sorry but in your posting something must be wrong. As far as i know Satellite A200 is delivered with original Toshiba recovery DVD. You must not create anything. Newer notebooks like A300 are NOT delivered with recovery DVD and every notebook user must create it alone but not with Toshiba Disc Creator. For this purposes Toshiba offer another tool. The name is ?Toshiba Recovery Disc Creator?. It is not the same tool. So you should have probably original Toshiba disc.

So if you have it please use this recovery DVD as described in this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=37706

2 more replies
Relevance 68.47%

I have installed the driver for the card reader, but if I put for example a Memory Stick into the cardreader, Windows does not show it or recognize the Memory Stick. And there are no icons for the card reader in "My computer".

Can somebody help me?

Answer:Toshiba A200-1CC Card Reader doesn't work

Hi,

is the Smartcard service activated in your "services"? If you don?t know what this is then Click on Start -> Control Panel -> Administration -> Services -> Smartcard

Then activate the Smartcard and enable it.

That should work, otherwise you can go to the Toshiba drivers download site and check for Cardreader drivers which should enable the whole stuff, too. But I am not sure if the modify the settings in your services...

Here?s the link to the Toshiba drivers download site:

http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

Greets

1 more replies
Relevance 68.47%

I have got a Toshiba Satellite A210-11T (PSAEGE). Tired of Windows Vista I changed to Windows 7.

Everything works fine except the Synaptics TouchPad and the FN key. Does anyone have any ideas on this?

Answer:Satellite A210: Synaptics TouchPad and the FN key in Win 7 don't work

Hi

You need to install the touchpad driver, VAP and Toshiba Flash Card Support Utility.
I?ve got the A210 too and I have chosen all Win 7 drivers which were released for the Satellite L500 series.

This worked properly

8 more replies
Relevance 68.06%

Hi,

How can I run Toshiba Face Recognition System on my Satellite A200?

The only problem with that software is the program do not see my cam.
I mean...it see the cam but when I try to register new face in system then I can read something like "The webcam is currently in use or there is problem with hardware".

So I turn off toshiba webcam utility but nothing changed.
The webcam itselfs is running correctly. Its Chicony webcam such as in toshiba's A300 series even the driver is the same (date,time, number, series)
So if someone know what can be wrong please answer..

Thanks
Bye

Answer:Re: Satellite A200-1ZF How to run Toshiba Face recognition system

Hi

I have checked download page for your Satellite notebook and face recognition tool is not available so I presume you have downloaded it for some other notebook model.
This is not so important and I think it should work anyway.

I have older Satellite P200 and it was also delivered without face recognition tool. I have installed it anyway and it works perfectly. My notebook hast ?factory settings? and camera Assistant software is OFF.

Is your notebook installed with recovery image too?

Try to remove preinstalled face recognition software and remove web cam from device manager, restart your notebook and try to install it again. it works on my notebook and I don't see any reason why it should not works on your too.
On this forum many people asked if this software can work on older notebook models and many people have confirmed it runs well.

1 more replies
Relevance 68.06%

Hey, I have recently got a problem with my Toshiba laptop where after the "Toshiba leading inovation" screen shows, my laptop screen goes black.
I have manged to find out the problem is one of my hard drives, and I am asuming it is the C drive as the laptop cant start up. If anyone has any information about what may be wrong, ways to fix it, and the possible expenses involed in fixing it, can you please help me?

also.. what are the chanced I will lose my files ect. off the drive?

Thanks

Answer:Satellite A200 - After Toshiba screen the display does black

Hi

Normally after the Toshiba screen the notebook tries to boot from HDD.

It could be a HDD issue but I?m not sure. Have you checked the BIOS if the HDD is recognized properly?
What happens if you load the default settings in BIOS?
Did you test and external monitor?

Last but not least it would be interesting to know if you can boot from another device, for example CD/DVD drive.

3 more replies
Relevance 68.06%

How to install raid/scsi drivers and get rid of vista for good

what you will need

?? 1 USB external floppy drive
?? 2 floppy disks
?? 1 set of drivers for the hard drive you have in the computer
?? a legal copy of windows xp pro

WHAT TO DO WITH THE FLOPPY DISKS

COPY THE DRIVERS DONT CUT AND PASTE THEM

?? get DISK 1 and place the drivers required onto the disk as they are without any folders
?? get DISK 2 and make a folder called $OEM$ and within that folder make another called TEXTMODE then within that folder insert the drivers that you have in disk 1

Installing the drivers and windows xp pro
?? when windows asks you to press F6 to install raid drivers press F6
?? then enter DISK1 into the floppy drive
?? when it prompts you to press "s" to install...install the raid and storage controllers
?? press "s" again and press enter on the same raid driver you just told windows to use
?? windows will then say that it already has drivers for the raid controller
?? press the appropriate key to tell windows you want it to use the floppy drivers instead of windows own
?? after the drivers load remove the floppy disk
?? wait until windows asks for the drivers again and insert DISK 2
?? and windows will install at long last vista is GONE you will need the drivers for any hardware your computer system but they should be easy to get from the manufacturers web site

I have used... Read more

Answer:how to install windows xp over vista on a toshiba satellite A200 1YO

How to install raid/scsi drivers and get rid of vista for good

what you will need

??? 1 USB external floppy drive
??? 2 floppy disks
??? 1 set of drivers for the hard drive you have in the computer
??? a legal copy of windows xp pro

WHAT TO DO WITH THE FLOPPY DISKS

COPY THE DRIVERS DONT CUT AND PASTE THEM

??? get DISK 1 and place the drivers required onto the disk as they are without any folders
??? get DISK 2 and make a folder called $OEM$ and within that folder make another called TEXTMODE then within that folder insert the drivers that you have in disk 1

Installing the drivers and windows xp pro
??? when windows asks you to press F6 to install raid drivers press F6
??? then enter DISK1 into the floppy drive
??? when it prompts you to press "s" to install...install the raid and storage controllers
??? press "s" again and press enter on the same raid driver you just told windows to use
??? windows will then say that it already has drivers for the raid controller
??? press the appropriate key to tell windows you want it to use the floppy drivers instead of windows own
??? after the drivers load remove the floppy disk
??? wait until windows asks for the drivers again and insert DISK 2
??? and windows will install at long last vista is GONE you will need the drivers for any hardware your computer system but they should be easy to get from the manufacturers web site

I have used this method and it worked with a Toshiba sat... Read more

1 more replies
Relevance 68.06%

First off I am new to this site, so if this is in the wrong forum, Im sorry.

I own a Toshiba Satellite A200 TR6 Laptop and it is my main computer. For a wile now I have been trying to get some games working (Age of Empires 3). The game requires a 64mb video card, and I currently have a 32mb. The game does not work properly because of the video card.
These are the things I know:
1) You cannot (usually) manually update a laptop video card.
2) It is possible to change the memory through the BIOS, but my BIOS wont let me do this. I have looked into updating my BIOS with no success.

I currently have - Mobile Intel(R) 945 Express Chipset Family, as my display adapter (dont know if this helps)
I downloaded - Intel 82Q963 Graphics and Memory Controller Hub (GMCH) onto my computer and tried to install the driver, but there were no changes.

Any suggestions to solve this problem and get this game running well would be awsome.

Thanks
 

Answer:Toshiba Satellite A200-TR6 - Video Card Problems

Update the laptop!
 

14 more replies
Relevance 68.06%

Hello,

i have Toshiba Satellite A200-1GM (PSAECE-02C00DPL) serial no. 97303299K.
I would like to refresh my Windows. I reinstalled to Win 7 - 32bit.
My problem is, when i try enter my notebook model in Toshiba driver search, there is no matches... for any windows.
Just simple Toshiba deasn't recognise my notebook model...

Can someone help me...

It's radiculous...

Best regards...

Answer:Satellite A200-1GM - no drivers on official Toshiba website

Your files aren't stored in the main Toshiba files, which probably means Toshiba no longer supports your model. But they are still stored in the listed archives. This is all the files I could find for your device Windows 7 32bit

Important drivers
http://support1.toshiba-tro.de/tedd-...1103110917.zip
http://support1.toshiba-tro.de/tedd-...1103111042.zip
http://support1.toshiba-tro.de/tedd-...1030104746.zip
http://support1.toshiba-tro.de/tedd-...1103110950.zip
http://support1.toshiba-tro.de/tedd-...1103110807.zip
http://support1.toshiba-tro.de/tedd-...1103111816.zip
http://support1.toshiba-tro.de/tedd-...1103111739.zip
http://support1.toshiba-tro.de/tedd-...1103111755.zip
http://support1.toshiba-tro.de/tedd-...1222142056.zip
http://support1.toshiba-tro.de/tedd-...1103111021.zip
http://support1.toshiba-tro.de/tedd-...1103111912.zip
http://support1.toshiba-tro.de/tedd-...0419152838.zip
http://support1.toshiba-tro.de/tedd-...1103110851.zip

Firmware: You will need at least one of these but not all, use the one you know you had before the refresh. If you don't know which one you had then use the top one.
http://support1.toshiba-tro.de/tedd-...0422163939.zip
http://support1.toshiba-tro.de/tedd-...0707135123.zip
http://support1.toshiba-tro.de/tedd-...0707134447.zip

1 more replies
Relevance 68.06%

Hi there,

Im having problems with my Toshiba Satellite Pro A200 Touchpad. It was fine until when i was walking down the stairs and accidently dropped it. The hard drive had to be replaced and the touchpad wansn't working. I've tried to diagnose the problem by checking device manager updating driver's etc. And ive narrowed it down to 2 causes: Damaged motherboard OR the touchpad wire has come loose/off. So as im really good with computers and very good with laptop's i need to disassemble my Laptop to get to the touchpad wire and check it out first. And then i will know if it is the touchpad or the motherboard. And now I have never disassembled a laptop before i have no idea what the process is especially for my medel which i cannot find guides for as it is not a very recent one. Could someone please give instructions on how to disassemble it? I will leave model and other info. about it at the end of this post. I would appreciate links to a guide etc or just simple easy instruction and pictures would be helpful.

Thank you ever so much for reading this wall of text and Thank you if you decide to help me out

Come on Tech Forums Let's see how good you are

Model Name: Satellite Pro A200
Model Number: PSAE1E-00Q002EN

Answer:Toshiba Satellite Pro A200 Laptop Touchpad Issues

Dropping it could have damaged the touchpad itself. Not just the wires.

If it is still under warranty, do not open it. RMA it to Toshiba.

3 more replies
Relevance 68.06%

Sensor panel with two regimes has 3 buttons to open some applications.
I've coordinated these buttons with some applications... But now I need to set other applications.
This function appeared to be so useful!!!

I tried to find this information in manual for my Toshiba Satellite A200-10x, but there were not such info.
I'm not really good in computers, please help me. I'll appreciate it.

Answer:Satellite A200-10X: How to configure the Toshiba media buttons

If you want to configure the Toshiba media buttons with other applications then you should take a look into the control panel.
There look for software called Toshiba Controls Utility or similar?

This program controls the buttons and there you should be abele to set the different settings.

Good luck

7 more replies
Relevance 68.06%

After a complete cleaning the fan and replacing the thermal grease I noticed that when the computer starts the fan is stopped for some minutes.

It starts but priodically stops again. Is it normal this situation???

Sometimes even the temperature goes up, the fan keeps stopped. I checked if the fan stacks but it seems to rotate freely (not have the symptom of stack shaft)!!!

Keep in your mind that the OS is Windows 7 installed long time ago. Before the cleaning and replascing the thermal grease, the computer hanged usually within 15 minutes terminatting with a BSOD. Note that HDD is checked for bad sectors and now is in fine condition after a regeneration (with HDD Reganerator)!

Is there any hypothetic case the OS to do not control the fan correctly???

What is your experience about this symptoms???

Anybody can help please????

More replies
Relevance 68.06%

Hi all,

I am looking for TOSHIBA Common Modules for my laptop. I didn't find them in the drivers download homepage.
I have Satellite A200 1M5 (PSAE0) and xp as an operating system.I will be more thankful if you guide me how to download them.
one more thing while I am trying to upgrade my Bios under windows xp I am getting this error message "

The new Bios image is the same as the current system Bios,so the Bios will not be changed" so what do think is the problem in this respect.

Laptop module
Satellite A200 1M5 (PSAE0)
Operating system
Xp pro

Thank you in advance

Regards

Answer:Satellite A200 1M5 PSAE0 - Looking for XP TOSHIBA Common Modules

Hi

The Common Modules are not available for the Satellite A200 (PSAE0) series.
I don?t know why you need this tool for the A200 PSAE0 but everything else should work without the installation of Common Modules

4 more replies