Computer Support Forum

Satellite C660 Hot-keys issue

Question: Satellite C660 Hot-keys issue

Hi I have just recently been provided a Satellite C660 for my further education, though I do believe in my haste to get it set up how I like to set up my computers I might of turned off the hot-keys now reading about on this forum I have found that to make them work again I will need to allow TOSHIBA Button Support to run at start up, but no matter how hard i try to find it on msconfig it no longer seems to be there, any one have any ideas about where I could find it on the C drive?

Though one of the strangest things I have noticed about this problem is that the volume hot-keys still work perfectly its just the rest of them.

EDIT

Just to let other people out there know I think I have solved my problem, here is the process I used to fix the hot-key issue.

Start menu - -> write msconfig in the search box on vista or windows 7 (if using XP type it into the run box) --> go to start up --> look for KeNotify Application and select it to run at start up.

There you have it it seemed to fix my issue so I hope it helps you out.

Message was edited by: Sneblot

Relevance 100%
Preferred Solution: Satellite C660 Hot-keys issue

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Satellite C660 Hot-keys issue

Just to let other people out there know I think I have solved my problem, here is the process I used to fix the hot-key issue.

Start menu - -> write msconfig in the search box on vista or windows 7 (if using XP type it into the run box) --> go to start up --> look for KeNotify Application and select it to run at start up.

There you have it it seemed to fix my issue so I hope it helps you out.

2 more replies
Relevance 75.85%

I have a Toshiba satellite c660-155 PSCOQE, I just reinstalled windows 7 from a generic disk and i have lost the function (fn) keys functionality (I can no longer hold down fn and press a key to change brightness ect) what to i need to install to regain this??

Answer:Satellite C660-155 - cannot use FN keys

You need to install TOSHIBA Flash Cards Support Utility and then Toshiba value added package.

By the way: if you want to use own OS installation you need to install many other drivers, tools and utilities that should be installed in right installation order.
If you need some assistance with it let us know.

2 more replies
Relevance 75.03%

I bought Toshiba Satellite C660-a9k notebook.
I found all drivers & set up Windows XP SP3.

Cannot find FN keys support software for this model for XP.
I tried common module+controls from C650. It doesnt work.
There are no Value added package for XP.

Also the computer does not wake up from sleeping.

Please advice.

Answer:Re: Satellite C660 - need software for FN keys for XP

>I found all drivers & set up Windows XP SP3.
That?s very interesting. I found support page for your notebook model and when I click on drivers and choose WXP as operating system almost nothing is listed.

This notebook model is not supported for WXP and full WXP configuration will be very problematic.

8 more replies
Relevance 75.03%

The keyboard on my month-old Satellite C660 often doesn't seem to work 100% properly - misses characters, doubles up, and typically doesn't register the capital letter when using the shift key (i.e. shows apital rather than Capital). It's intermittent so maybe a software issue - something running in the background and taking up resources (though surprising as it's a fairly fast machine).

I have Office 2010, Kaspersky, and it's usually connected to the internet via a USB router.

Has anyone else experienced this problem or found a solution?

Answer:Keys not registering on Satellite C660

Please check if new BIOS version is available and update BIOS.

Some forum users have noticed similar behaviour on Satellite L and it was fixed with BIOS update.

3 more replies
Relevance 75.03%

I have a Satellite C660-m21f and i installed windows 7 on it and then the function keys don?t work
I downloaded and install the driver called "flash card" and then the function keys worked .. but the there is no on screen display for the volume and locks.

What can I do? Or what application should I install?

Answer:FN keys issues on Satellite C660

Have you installed ?Toshiba Value added package??

3 more replies
Relevance 74.21%

Function keys for Satellite C660-A219 do not appear...I formatted my laptop and installed a new Win 7 after that I lost the function keys ....plz help

Answer:Function keys for Satellite C660-A219 do not appear

Have you installed own Win7 version or original Toshiba recovery image that you got with your Toshi?
Have you installed Toshiba Value added package?

4 more replies
Relevance 74.21%

Hey all,

I have a Toshiba C660 PSC0QE, and recently some of the letters have stopped working. Well I think it happened when my 1year old smacked the keyboard! :[email protected]
Its just random keys but the following are not working;
e, t, u, i, o, z, x, c, v, m, space bar, shift, back space, ctrl, 2,4,8,9 and prob some other keys.

Is this a common fault on these models?
Could a bios update fix this? - how do you perform this?
Or do i need a new keyboard ?

Thanks

(using this on-screen keyboard is awful)


p.s. i couldn't find an answer on the forum

Answer:Satellite C660 - keys on keyboard are not working

I've been having the same trouble and after trying a few things I eventually tried upgrading the BIOS which has totally knackered my laptop (same model as yours), now it won't even switch on!

8 more replies
Relevance 73.8%

I did a clean install Windows 7 and installed all the drivers from the Toshiba site but my function keys are not working.

Any idea how I can make them work?

Answer:Satellite C660 - What driver for brightness keys to work?

Hello

As you can read in many other threads the FN keys require Value Added Package and Flash Cards Support Utility. Both tools can be downloaded on official Toshiba website:
http://eu.computers.toshiba-europe.com/ > Support & Downloads > Download Drivers

Install Value Added Package at first, then Flash Cards Support Utility. After installation of both tools the FN keys will work as usual. :)

3 more replies
Relevance 73.8%

I have bought a new Satellite C660-A235 but i have a problem with the multimedia/function keys ,
only function keys are working but not multimedia keys although I press the FN key while other multimedia keys located wuthe the numbers 1,2,3,4 like volume up and down are working well with the FN keys but without screen notifications.

Note : i have installed value added package and flash card drivers

Please help

Answer:Satellite C660-A235 - Multimedia Keys are not working

It?s really strange. Have you noticed this problem from the first moment after you started your notebook for the first time or few days later?

3 more replies
Relevance 67.65%

Hi all!

I have Toshiba Satellite C660-1GK for about year and a half. After 6 months my hard disk drive died.

First the laptop got really slow and then started the famous clicking sound from the disk.
I've made backup and checked the drive with Hirens tools. Toshiba diag won't even read it, S.M.A.R.T. said that his health is poor (30% or so), bad sectors started popping out.. so I've took the laptop to my ASP.

They replaced the disk and then, 13 months later (a week ago) the same story! Disk health went even lower (was at 11%) and bad sectors started jumping out like maniacs.
Again a trip to ASP.

I've got my laptop today with a new disk. After reading posts on this forum, I'm worried that it's or motherboard/power supply problem or we're just all with bad luck with drives.

I just can't accept that disks randomly die every 4-12 months as an answer. My last disk on HP laptop lasted 4 years! I have about five more months of warranty and I'm really not happy with situation. This laptop is on my work desk, has it's own station with a nice, big fan so it's not overheating - basically I've took it out of house last September.

I'm careful with it! But if this drive dies before end of year, maybe it's time to get a new laptop.
Not Toshiba this time :(

Please, do you have any thoughts, advices..?

Answer:Satellite C660-1GK - HDD partition C issue

Hi

Some years ago i purchased an notebook from another manufacturer.
My first HDD died after more than 2 years of usage. I bought another one, replaced the old HDD and the new HDD died after 4 month of usage.

Any HDD will die sooner or later because its expendable part? it?s a matter of HDD usage and matter of how you handle the unit.

In my opinion it?s a bad luck? of course its always pity if an HDD start to malfunction but I?m afraid there are no many options to prevent it.
Of course you could switch to an SSD drive which is much stable in use. I did it some month ago? I purchased the 250GB SSD drive and replaced the internal HDD

1 more replies
Relevance 67.65%

I am having an issue with the keyboard on my Satellite c660 laptop, part number: PSC1LE.
The best way I can describe it is as a stuttering problem because it comes and go's (fine for a few hours, then not for a short while).

The problem is that for reasons unknown to me I keep encountering a problem where the A, N and Enter keys do not work when pressed. Occasionally pressing the key repeatedly (they aren't jammed) just makes the letter come out, but I can't keep pressing the key five or six times to get one letter. Just to mention, I have not spilled anything on the keyboard.

I have done full anti-virus and spyware scans but have found no issues.
I have this evening done all of the windows updates available to me, however it doesn't seem to have done the trick.

After restarting the device following the updates all worked well for about 15 minutes, until the same three keys stopped working again. On this occasion it lasted only for a couple of minutes, and now I am writing this with the same keyboard.

Note: I am not using the original keyboard. I changed the board due to minor material damage but had it done privately.
However this was done the better part of a year ago and has worked perfectly since being installed, until this new issue occurred in the last few weeks.

If anyone has any further recommendations or suggestions as to what may be the cause or any solutions then please share them.

Answer:Satellite C660 - Keyboard issue

I think you would understand that nobody is able to say why your keyboard malfunctions.
Only if the notebook hardware has been checked/scanned, it would be possible to say what?s wrong here?
But generally speaking there is a good workaround to diagnose the problem.

You could connect the external USB keyboard to the notebook and could check if the same problems with the mentioned buttons will occur.

In case the external USB keyboard would work properly, I think that your internal keyboard is the troublemaker? in such case you would need to replace the keyboard once again.

4 more replies
Relevance 67.65%

Hello,

i have this notebook just about 2 months, so the solution of this problem cant be that my notebook is old and inside is dust..
if am i just surfing on internet, temperature of notebook is about 40-60 degress, but if am i gaming it goes quickly up (65-75)
- maybe after 2 hours gaming temperature goes up and i must quit game.
If temperature is about 75 degress, computer started to be noisy and i think it goes down..

What i have to do?
Thanks

Answer:Re: Satellite C660-11W - overheating issue

After reading your posting I don?t know what the problem is. The temperature you mentioned in your posting is not on critical level so I think there is no reason for panic.

When you want to play the game, close all useless applications, switch to high performance power plan and be sure notebook is placed properly on the desk. Cooling fans should not be blocked and notebook must be able to ?take a breath?.

Until there is no ?unexpected switch off? there is no reason for panic.

3 more replies
Relevance 67.65%

Hi there,

I have purchased a Satellite C660-17J and occasionally when I turn it on (holding the power button for 2 or three seconds and then releasing) - it doesn't seem to power on properly eg - fan starts - power light comes on - but not screen. If I hold the power button again it goes off. Then if I try again it will come on but the date and time resets itself to 2008.

Any ideas or will I have to send it back to Amazon as faulty? (could do without doing that!).

Answer:Satellite C660-17J - Power on issue

Hi ebarnyard,

When you connect an external screen, can you see something on it or is it still black as internal screen?

> Then if I try again it will come on but the date and time resets itself to 2008.
Do you mean the time of Windows or BIOS?

Generally speaking I must say this is no normal behavior and in my opinion it?s something wrong with hardware itself. So I would contact an authorized service provider in your country and ask the guys to check your notebook what?s wrong with it because hardware repair is for free due warranty time ;)

5 more replies
Relevance 67.65%

Apologies if this is the wrong subforum:

Being the idiot I am, I changed my WIndows Login password and since I use very long passwords, I have no idea what I changed it to. Guessing is out of the question.

So I powered on my laptop while holding the 0 key, which brought me to the Windows Boot Manager screen. I pressed F8 on Windows 7 for advanced options and opted for 'Recovery Mode' as I have used this in the past to install the OS from scratch.

It asks me to select a keyboard layout and then enter my username and password to procede with HDD Recovery. It is this lack of password which is the reason for recovery.

Any advice on what I can do?

Thanks

Answer:HDD Recovery Issue on C660 Satellite

>It asks me to select a keyboard layout and then enter my username and password to procede with HDD Recovery. It is this lack of password which is the reason for recovery.
On this step you must enter your Windows login name and login password. Without right password you will not be able to start HDD recovery installation.

There is second option to install recovery image. You can do it now using recovery DVD. Have you created it using preinstalled Toshiba recovery disc creator?

4 more replies
Relevance 67.65%

Hi,

i am having a kind of software glitch on my laptop. when i turned it on, it showed a message with options either to launch startup repair (recommended) or start windows normally. i chose the first option as that seem to be the recommended option and i thought this might repair if there was any damage. however, after the repair process was completed, it showed an error message with steps to install Windows. i am getting this message now everytime i turn my laptop on!

Since i have the software pre-isntalled on my laptop, i do not have the Windows 7 disc with me. this is really strange as i am unsure why this happened.

Although my laptop is covered with the warranty, i am not sure if it covers the software warranty too?

Please can some one advise me on the best way out of this problem.

its really very painful and irritating to deal with this, as its been just 5 months since i bought this laptop.

Answer:Windows 7 issue on my Satellite C660-1F1

> however, after the repair process was completed, it showed an error message with steps to install Windows. i am getting this message now everytime i turn my laptop on!

Looks like something has gone wrong with the installed OS.
Not sure why but it seems that you need to reinstall the windows once again.

> ince i have the software pre-isntalled on my laptop, i do not have the Windows 7 disc with me. this is really strange as i am unsure why this happened.

You did not receive any disks because the notebook supports the HDD recovery and additionally there was/is a option to create a own recover disk.
You could use the Recover disk creator software in order to create such disks?
But not sure if this would be possible now because of the error?

So would recommend starting the HDD recover as described here.
http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

1 more replies
Relevance 67.65%

When my wife got off the plane a baggage handler helped her by pushing her mother in the wheelchair and dragging one of the bags behind him allowing my wife to take care of the rest of the luggage. Unfortunately the laptop that was sitting on top of that bag decided that it didn't like the ride, it jumped off the bag and tried to enter the terminal under its own battery power.

There is no visible damage to the laptop as it was inside the laptop bag and no cracks or anything on the screen. When the laptop turns on, the screen can remain blank, flicker or it will display the log on and desktop but instead of showing white it displays a pinkish purple, only white is affected not off white. Other colours display correctly although they do look as if the display is set to 256 colour or using the wrong driver.

I connected an external monitor to it and that works fine with full colour. If the laptop screen flickers a light tap to the back of it will get it to stay on but the colour isn't corrected. I am thinking that it may be just a loose connection or broken wire between the screen and the motherboard but not sure if the change in colour would be caused by this.

Satellite C660 (PSC1LA-00J001) looks brand new but I don't think it would be worth taking in to get fixed.

Any ideas on what the problem might be?

It took me 2 1/2 hours to post this exact same message because somewhere in there is profanity or inappropriate language. :(

Answer:Satellite C660 - screen issue

Hello

On this virtual way it is not possible to say for sure what is wrong there. Your notebook must be disassembled and all must be checked. Graphic card seems to be OK so there must be some problem with connectors, cable or with the display itself.
>Satellite C660 (PSC1LA-00J001) looks brand new but I don't think it would be worth taking in to get fixed.
Why not? Even display exchange is not so problematic. Googling around you will find many online stores where you can order new display, if necessary. Even on eBay you can get it for reasonable price.

If you don't have experience with this stuff I recommend you to contact nearest Toshiba service provider or some independent IT service and ask for help. Check which options are available and how much you must pay for repair.

2 more replies
Relevance 67.65%

Hey Guys,

I've been having an on and off issue with my touchpad for at least a couple of months now. I've tried doing the function +F9 thing with little effect. I also re-downloaded the synaptics driver which seems to make it work for a little while but then it started working only sporadically.

Currently my touchpad works some of the time, if it fails at first pressing Ctrl Alt Del and then Esc seems to make it work for a little while longer but after that it simply stops working. I'm a student and not having a fully functioning laptop is often a great hindrance so any help would be great.

Best,

gleeful199

Answer:Satellite Pro C660 - on and off issue with the Touchpad

Hi

My first question is: when did you notice this touchpad issue.

I mean, the Sat Pro C660 is an older notebook and if this issue did not appear from first day of purchase, then something has affected the touchpad functionality in the past.

The question is: is there something wrong with software or maybe touchpad module.
I think this can be answered only settings the notebook back to factory state.
If you recover the notebook using Toshiba recover disk, you will get exactly the same state like at the first day of purchase.

If touchpad would still not work properly, well then there is some hardware problem

1 more replies
Relevance 66.83%

Hi all

I was updating BIOS on TOSHIBA SATELLITE C660-13R from windows 7 64 bits. Downloaded driver from toshiba web. Half way the installation laptop freezes. I have left it for 40 mins to run but it did not get back to normal state. As motherboard fan has started to move on high speed I decided to take battery out. In result when I power back my laptop I have 1 beep from the motherboard and black screen.

Can some one help me please ?

Answer:Satellite C660-13R - BIOS update issue

Obviously the BIOS update procedure has failed. Something went wrong during the update process and it looks like the EMRPOM module has not been flashed properly.
This is the reason why the notebook does not work anymore.


Possible solution?
Well, if EMPROM isn?t damage, it should be possible to re-flash the BIOS module once again using special BIOS version and BIOS crisis disk.
Usually the Toshiba authorized service provider in your country should be able to re-flash the module using such crisis disk.

I read also in this forum that some people managed to re-flash the EPROM module using some 3rd party crisis disk found somewhere in the internet? but this did not work always?
So probably the ASP will be your last resort?

However, use the forums advanced search option to find related threads about the BIOS crisis disk? could be interesting for you

2 more replies
Relevance 66.83%

Hi,
I cant find graphic drivers for my tosh. I try search it on intel site but they send me here

plz help

Answer:Satellite C660-1KW - graphic drivers issue

Yes, you should use driver offered on Toshiba download page. This driver is tested and adapted for your notebook model.

Check please Toshiba download page on http://www.toshiba.eu/innovation/download_drivers_bios.jsp
There you can find all drivers for al supported operating systems.

If you need help anyway let us know.

10 more replies
Relevance 66.83%

Good day, fellow Toshiba notebook owners.

I have a little trouble upgrading my BIOS to a "newer" (according to Tempro) version.
I just installed the Tempro application, and it detected that my BIOS needs an upgrade, so I naturally downloaded the "new" BIOS. Everything went fine, but when I tried to install it, a message popped up in the install window:

"*The program will be closed!* There is an error occurred, please check below items. Bios version above 190. Battery capacity more than 10%. AC is attached."

No matter what I do, I get the same error, over and over again. I looked the problem up before I posted this thread, and other people encountered it, but, unlike my case, advices like "Close all background applications", "Charge your battery", or "Make sure the AC is attached" really helped them.

I tried closing everything, my battery is always fully charged, as I rarely disconnect the AC adapter, and, of course, the AC connection issue is not the cause, since it is almost always plugged in.

I checked my BIOS version in +msinfo32.exe+ and it is 1.90 already, but I remember upgrading it months ago (sooner than the release date of this last version), and if, hypothetically, I have the last version already installed, why doesn't Tempro acknowledge it and keeps alerting me over a non-existent issue?

Maybe there is something wrong with Tempro, but I just need to be sure before... Read more

Answer:Satellite C660 - 1C7: BIOS upgrade issue

Hi

Tempro notify you about new uploaded drivers or BIOS?
The Toshiba European driver page provides all the drivers and BIOS files and the latest BIOS version 1.90-win has been uploaded at 04.06.2012 and therefore you received this notification by Tempro software.

Who knows why they uploaded this file once again.. but fact is that your BIOS is up to date and therefore you cannot update the BIOS once again using the one and the same version.

3 more replies
Relevance 66.83%

Last year I purchased a Satellite C660-1G3 laptop from UK; even today, I am using the factory settings, and running the originally installed Windows 7 OS. The following is the issue that I started facing yesterday onwards:
- Even when the battery is well-plugged and the laptop running, the Power Meter indicates a falling charge level, with the "Plugged in, Not Charging" notification. The orange LED keeps blinking

- However, when I completely shut-down the laptop, without touching anything (not even touching the adapter or the power cord), the orange LED indicating battery charging process stops blinking and becomes stable

- On re-starting the laptop, for about 1 minute or so, the battery appears to be charging (orange LED not blinking and "Plugged in, Charging" message). However, soon the orange LED again starts blinking and the nuisance message again comes up

A couple of things:
- the battery seems to be working fine and charging properly when laptop is shutdown (in fact, till a couple of days back, the battery used to show 2:30 hours of time available on 100% charged level)
- is there some issue with the Operating system? no idea on that

can experts help me in resolving this issue? I do not really want to approach the Service Center due to long distance involved.

regards
- Biren

Answer:Re: Satellite C660-1G3 - "Plugged in, Not Charging" issue

Hi Biren

Not sure if I can help you but I would like to provide you some tips.

1) Check if your BIOS is up to date. If Toshiba European driver page provides newer version, then update the BIOS. Additionally set the BIOS to default pressing F9 and save changed pressing F10.
2) Try to calibrate the battery. To calibrate the battery you should discharge the battery completely and charge the battery again. Repeat this procedure 2-3 times in the row.
3) Remove the battery and AC adaptor and press power button (30 sec long) then connect both parts and check if the LED would start blinking again.

Finally I think that the notebook should be tested using new, good working battery. But if the issue would still persist, then I would assume that your motherboard might be affected.

4 more replies
Relevance 66.83%

I have been using a foldable keyboard and a remote keyboard and have been having problems:

1.Characters not showing when typed.
2.Cursor jumping from typing position to another place usually outside the box that I am typing in.
3.Characters repeating while typing.
4.Actions ie Backspace not operating.

These problems do not seem to happen in Gmail and are not happening as I type this.
The problems have occurred so far in Google Calendar,a text doco and login to a site.
The problem did occur with the on board keyboard once so I am wondering if it is a malfunction or a virus.

Any ideas ?.

Answer:Satellite C660 keyboard typing issue

Hi

In this forum you could find a lot threads about similar theme and the solution is easy:
You have to update the BIOS.
New BIOS version would solve the issue? this was also confirmed in the forum.

Good luck

2 more replies
Relevance 66.01%

New to this forum so dont know if this problem has been covered.

Have installed Photoshop elements 11 and premier elements 11.
The elements program runs ok but cannot get get premier elements to open new project. Adobe advised trying to update drivers which I have tried without success.

When running driver update on laptop it says latest driver installed. 8.15.10.2189
On checking Toshiba update site it shows later version 8.15.10.2353.
Have downloaded this ,I then unzipped it and it says will start automatic installation when finished but nothing happens.

Have tried several times but once unzipped it will not install.

Any help would be appreciated and infact confirmation of latest driver.

Answer:Satellite C660-23M - graphic driver update issue

It may be software related by the sounds of it, Have you updated direct x, as this is used aswell as adobe.

13 more replies
Relevance 66.01%

Stellarium (a free application for astronomie) works w/o any problem on many computers of my astronomie club but impossible to use it on my Toshiba Satellite C660-226. No problem during installation but nothing appends when I launch the program.

I run it in compatibility mode (windows XP Sp2) and Intel HD graphics driver is at level 8.15.10.2189 as recommended on Toshiba support center.

If I install a lower level of this driver( VGA std graphic carte at level 6.1.7600.16385) ,Stellarium works but very slowly and some functions (like zoom) are bugging.
Stellarium support center recommands to install a more recent level of intel HD graphics driver but I don't find a more recent level working with P6100 processor on Intel download site.
Can you help me?

Regards

Answer:Intel (HD) graphics issue when trying to use "Stellarium" on Satellite C660

I've got the exact same problem with a toshiba satellite pro c660-1nv.

I've found a more recent driver on the intel website : http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20842&ProdId=3231&l ang=eng with the version 8.15.10.2622. But I can't install it, I have an error message saying that this driver hadn't been validate by the manufacturer (Toshiba). Do not know what to do...

4 more replies
Relevance 66.01%

Hello,

sorry for my English level, I'm French

I have an issue without solution with my Satellite C660 (for the moment i hope!) I downloaded the software google sketchup 8, dedicated to the architecture drawing, but it doesnt work, I always have a bug message informing that it is necessary to update de drivers of the graphic card (According to google support it seems that OPENGL functions should be implemented in the drivers of my laptop)

So I have downloaded the last available drivers for the configuration I have ( Intel HD graphics for pentium, windows 7 64 bits) ;

the link ( french website, the one for Intel is not currently available, it is an .exe document)

http://www.touslesdrivers.com/php/constructeurs/telechargement.php?v_code=37057&v_langue=fr

I have tried to manually update de graphic card driver with the device manager menu (graphics card > update the drivers button> manual file.exe selection ), but at the end there is no update, I only have a very quick message informing that windows has determinated that the drivers are already updated.

Actually there is no changes on the drivers (still the same date of the pilotes 28/07/2010 in the graphics card properties) and sketchup is still out of work

Any suggestions?

Thanks in advance

Answer:Satellite C660 - Intel HD Graphics update issue

Hi


What C660-xxx do you have exactly?

If you have an Intel graphic card, you should download the driver directly from the Intel website.
There you should find the latest driver version

5 more replies
Relevance 65.19%

Having had several attempts at trying to install various software, Microsoft Fixit program has scanned and found that my PC has faults with USB points.

The screen read: "Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed".

It also listed the following...
"Intel(R) ICH9 Family USB Universal Host Controller 2936"
"Intel(R) ICH9 Family USB Universal Host Controller 2939"
"Intel(R) ICH9 Family USB Universal Host Controller 293C"

Any idea how I can fix this please?

Computer is Toshiba C660-1JH Satellite.
OS is Win 7, 64-bit.

Answer:Satellite C660-1JH: USB Device issue - software not successfully installed

Hi

Try to remove the USB ports and hubs from the device manager.
Reboot the unit and wait until Windows OS has reinstalled all USB controllers once again.

If this does not help, update the chipset driver because chipset driver controls the USB controller.

Here you other thread about chipset driver;
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=249306

2 more replies
Relevance 65.19%

Hi,

Last week, I bought my first laptop - a C660.
A few days after I bought it, I noticed that it was typing doubles of characters or missing characters out completely.
Now, it might just be that I'm adjusting to the keyboard, but I was wondering if there's been any problems with the keyboards?

Answer:Satellite C660: keyboard issue - doubles or missing characters

hi,

maybe, there is a keyboard hardware defect. Do you run Os with factory settings? otherwise, contact the service center. they will fix it for free.

8 more replies
Relevance 65.19%

Hello,

I have a Satellite C660 laptop. The keys are driving me crazy! They keep sticking, and miss letters I have pressed.
As a touch typist this is very frustrating.

I'm not very PC litterate - so if someone can give me a simple solution I'd really appreciate it.

Answer:Satellite C660 - keyboard issue - missing letters while typing

You know what?
I think I?ve found a solution to your issue?

I checked the Toshiba Knowledge database which you can find on the Toshiba European page and this document could be interesting for you:

*Keyboard Issues with the Satellite/Satellite Pro L670 & C660 Series Notebooks*
http://aps2.toshiba-tro.de/kb0/TSB1103370000R02.htm

Please perform a BIOS Update in order to solve this issue?

Good luck!

3 more replies
Relevance 64.78%

Hello,

I recently purchased toshiba Satellite C660 M21G Laptop with windows 7 32 bit installed (not licensed) and I installed all the hardware drivers except the SM Bus Controller and the Nvidia GeForce graphic adapter driver, this because it does not exit on toshiba web site, or by other mean it exist but when I try to install either the Chipset utility or the display driver (VGA driver) an error message appear in both installation indicates that I didnt matched the minimum system software requirments for installing both the Dispaly adapter and the chipset.

I dont know why those requirments does not included in the error message ?

I have more that 12 hours trying to find a way out to install the dispaly driver because the standard VGA driver that windows 7 (32 bit) installed is very poor and i cant running any games or playing video smoothly
I am suffer and I need help

best regards

Answer:Satellite C660-M21G SM bus controller and display driver installation issue

From my knowledge the Satellite C660-M21G belongs to the PSC1SE series.
I?m wondering where did you find the right display driver for this series?
The notebook seems to support the NVIDIA GeForce 315M

I checked the Toshiba European driver page and not all Win 7 32bit drivers are released on the European driver page? I think you tried to install wrong or not compatible graphic card driver and therefore this error message appeared while installing the drivers.

But it seems that Win 7 64bit driver is available for this series therefore I would recommend testing the driver for Win 7 64bit.
The SM bus controller might be the Card reader and in such case you should install the Card Reader Controller driver from Realtek. There is also an Win 7 64bit driver version available on European driver page?

Test it simply?

2 more replies
Relevance 64.78%

HI,

I have a problem with updating the BIOS on Toshiba Satellite c600-28j.
Error: Project ID check fail

Model: C660-28J
Part NO: PSC1NE-01200XRU
Serial: XB063018K
BIOS Version: 1.10
OS: Windows 7 Pro SP1 32-bit

What can you recommend?

Thanks.

Answer:BIOS update issue on Satellite C660-28J - Project ID check fail

Check this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=64817

The BIOS from Toshiba Australian page should work

1 more replies
Relevance 63.96%

Don't know if anyone can help me but I'm losing the will to live.

I've got this laptop, the OS corrupted and basically failed due to a malware infection. I never had the recovery disks so I've clean installed Windows 7 Home Premium 64 bit twice in the space of 3 days because each time, Windows Update will not work. It simply sits on checking for updates and never finishes. I've tried EVERY solution going - ive reset windows update, done all the fix it programs supplied by microsoft to no avail.

As I said, this is a totally clean install, no anti virus, no 3rd party firewall, updates attempted via both ethernet and wifi. Am I missing a driver of some sort? There are no exclamation marks or warnings in device manager?!

It's doing my head in. What am i doing wrong?!

One observation, both installs have required me to activate via phone, it wouldn't work via the internet?! Is this related in any way?
Drivers installed:
Chipset
Video
Audio
LAN
WLAN
Touchpad

I got them off this page: http://www.toshiba.co.uk/innovation/...untry=8&page=1

Is there any that I'm missing that are important?

Thanks in advance!

Dan

Answer:Satellite C660 PSC0LE - Win7 64bit clean installation - update issue

Is SP1 already installed on your Windows 7 system?
If not, you could download this from here:
http://windows.microsoft.com/en-us/w...service-pack-1

Otherwise I recommend you to check the MS knowledge base regarding the Windows 7 update issues.

You don’t’ use the Toshiba image and therefore this isn’t Toshiba notebook problem but system issue.

2 more replies
Relevance 62.73%

Hi,

Can someone please help,

I recently bought a Toshiba Satellite C660/C660D for my nephew, We have forgotten the administrator password and we don't have password reset disk is there anyway around this.

Thanks

Answer:I forgot my administrator password on Satellite C660/C660

Hi

I assume you are talking about windows system password and not about BIOS password. Right?
It?s not very big problem if you forgotten the System password but if you mean BIOS password then you are in trouble because the BIOS password can be deleted just by an Toshiba ASP technicians?

So I assume you mean Windows password? so start the notebook and press F8
Now you can choose Repair my Computer and then choose HDD recovery.
This would start a HDD recovery procedure which would reinstall the system? during the setup you can set anther admin password.

Of course there are some other methods but as far as I know this requires 3rd party software/tools or Win 7 DVD? so I think the HDD recovery is the fastest solution.

8 more replies
Relevance 61.09%

Hi,

I have a problem that affects the function of the special keys of my Satellite L50-B-17-V with Win8.1, since Toshiba has released the new 1.90 bios, I do not work anymore automatically, but pressing the fn key while before you, I was in the setup function by changing the bios, but it remains the standard mode f1-f12.

How can I fix it? Thanks

Answer:FN keys issue on Satellite L50-B-17-V

Try please to change ?Function Keys Mode? in ?System settings? tool.
Open Desktop Assist > Tools & Utilities > System settings > Keyboard. There you will find this option.
Please try to change mode to ?Special function mode? and confirm with apply.

After doing this test F keys and post some feedback please.

3 more replies
Relevance 59.86%

EDIT: Never mind - I solved the problem on my own.

Message was edited by: realisminflicts

Answer:Satellite P755-S5262 Issue with Fn Keys

It?s great that you solved the problem on your own but a short error description and some information what you did would be nice? Just for other Satellite P755 owners ;)

Please send some feedback

1 more replies
Relevance 59.86%

Hello, I am new to this forum so please bear with me if I am in error.

I have just bought a Satellite A100-049 and inadvertently pressed the F10 key. The LED below the key illuminated and I discovered to my horror that I could not type certain letters and, worse, I could not turn off F10, whatever that is! I eventually had to restart.

I can see what F1 to F9 do from the drop down list at the top of the screen, but I cannot work out what F10, F11 and F12 do, and am in constant fear of pressing them again! The handbook and Toshiba web site don't seem to offer any help, although it is probably because I don't know where to look.

Can any of you kind experts out there fill me in?

Many thanks,

John

Answer:Function keys issue on a Satellite A100-049

Hi there,

maybe I know how to resolve your problem. Try to press "Fn+F10" (Hold Fn and press F10 at the same time).
Then your keyboard should work properly again.
Maybe you pressed a key combination (e.g. "Fn+F10") and then the alternate keypad on your keyboard was activated.

Please give some feedback if my hint helped you.

Greets

2 more replies
Relevance 59.04%

I have a problem with my Toshiba Saellite P300-1FC
In general the Keyboard and all keys are working proper but sometimes a button is not working. When I press the button again (normal force) it works.

I tried already to recover the notebook but it doesn?t help.
Another problem are the soft keys on the right hand side to the power button. The buttons are not working. A recovery of the computer doesn?t help.

The illumination is also not working; illumination of the satellite logo + touch pad is ok. I recovered the Bios -> this was not the solution. The problem with the illumination is not a OS problem because it occur already during startup.

Any ideas regarding my problems?
Best Regards

Answer:Satellite P300 - Keyboard and Soft Keys issue

> When I press the button again (normal force) it works.
That?s the key. Use normal force. When I?m typing fast and the pressure on the keys is not good enough I can see missing letters in the text I write. To be honest I don't see it as a problem. The same happen on my machine too.

Illumination works only if this option is enabled. If I?m remembering well you can do it in BIOS settings directly or using option in HWsetup tool. You can find it in Toshiba Assist > Optimize. The same is on my P500 model.

Check it out.

4 more replies
Relevance 59.04%

I have got a problem with my num lock keyboard. I have a P300D - 131

Pressing "4" and "8" at the same time it shows at the screen "4,"

Pressing "0" and "6" at the tame time it shows at the screen "0 0"

This also happens if I key in the numbers very fast. Therefore you can not rely on num lock keys! I have got this problem since I bought the laptop in July 2008. Now I found this forum and I hope really somebody can help me solving this issue!!!!

THANKS
hdw

Answer:Satellite P300 - strange issue with num lock keys

Hello

Such issues in the past were solved with BIOS update. So I recommend you as first step BIOS update.
Check actual version on your laptop and latest offered on Toshiba download page.

To be honest I don't understand why you waited so long time about it. Notebook has valid warranty and nearest Toshiba authorized service provider can help you about it.

2 more replies
Relevance 59.04%

Reinstalled Win 7 prof. again, installed all necessary drivers for graphic, sound, touchpad, etc, plus latest Value Added Package for my model, and shortcuts (pressin FN on keyboard + F1-F12) does not work. But when i point mouse to up of my screen and i click those buttons by mouse - they work.

But it's irritating to minimize game or movie to change brightness of screen, or when batteries from my bluetooth mouse are gone - i can not turn on touch pad with FN+F9 shortcut.
Tried also (before format) using Flash Card and some other stuff which was working on Vista 64, but they do not work on Win 7 64.

Any solution yet for that? Seen couple topics about that but now they are gone, or i'm blind?
I'll be very happy if i could use those at last.

Answer:Satellite A350-110 + Win7 64bit - FN keys issue

Hi, have you installed the FlashCards Support Driver? It should be available on the Toshiba website.

4 more replies
Relevance 59.04%

Hi,

I have a Toshiba A350-10z with windows 7 64x. When I had a Vista everything was all right- all light keys works correctly.
Now keys have different functions- the "silence" key runs my player for example. And there is another problem- my "FN" key doesn't work.

When I use it- OS shows an error and ask me to close application. I can run these shortcuts only by mouse. Is there any driver for this?
I can't find any on the download site.

Answer:Strange issue with light keys on Satellite A350- 10z

Please install Value Added Package for your notebook model.

If you have it already remove it from the system and after notebook restart install it again.

1 more replies
Relevance 59.04%

Hello everybody,

I have two questions and I will highly appreciate your help.

First, when I got the laptop it used to have a Fn bar that comes down from the top of the screen when I press Fn, it shows all the Fn keys, now it disappeared. I need to get it back, I almost tried everything and nothing is there yet.

Second, the touch pad is not zooming anymore when I apply the 2 fingers in and out, it used to do that before.

My laptop is Satellite L505-13W

Thank you in advance

Answer:Satellite L505-13W - FN keys not shown and touchpad issue

Hi abdouni,

1. I think the problem is related to Toshiba Value Added Package and Flash Cards Support Utility. Both tools control the FN keys and the Flash Cards appear if you press FN key.
You can download it on official Toshiba website:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

Regarding the installation: First of all remove both tools and restart the notebook. Now install Value Added Package and restart again. Install Flash Cards Support Utility and make one restart. Now the FN keys should work again.

2. This could be related to Value Added Package too? So check my posting.
If it?s not work, reinstall the touchpad driver.

2 more replies
Relevance 58.63%

As it is not possible to answer to this thread:

http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=80653&tstart=0

I just want to let you know that BIOS default settings doesn?t solve the problem!! It is necessary to unplug the battery!

In my case I unplugged the power supply and removed the main notebook battery. My BIOS battery is not working anymore so the main notebook battery is responsible to save all BIOS settings.
After this procedure the notebook shows ?cmos checksum error defaults loaded? after the first boot sequence. Afterwards I set up the BISO and my problems were solved ?

Message was edited by: blutoniumboy85

Answer:Satellite P300 - Keyboard and Soft Keys issue -> SOLVED!!!!

Hi
Thread is unlocked. Can you please post this additional feedback there?

1 more replies
Relevance 58.63%

When one of these keys are pressed (z,?,Fn or arrow keys), the cursor control mode light glows and the keyboard does not work anymore. Moreover, the context menu of the application randomly appears and disappears and, when I am using a text editor, it writes ?\z? repeatedly. The cursor moves cursor moves uncontrollable across the screen.

I tried to disconnect the internal keyboard and use an external one but I have always this problem. I also tried a full reinstallation with the recovery CD but the problem persists. Any idea?

Message was edited by: dacostamedeiros

Answer:Satellite 2430 keyboard issue when press z,?,Fn or arrow keys

Hi,

Have you the same problem with a extern Keyboard? Check this.

By

4 more replies
Relevance 57.81%

Hi All,

Had two issues with my U400-15B which I am hoping to resolve.

1) The first issue is that I have noticed that my internet occasionally seems to hang on Internet Explorer when using website's which have a couple of images e.t.c.
It will freeze but the rest of the laptop works fine - I mean you can go into the start menu and open other programs fine. However, if you open Microsoft Word while this is happening, it will take slightly longer to load up than normal. Does anyone know what this could be or how I can resolve this?

I am using Vista Home Premium 32 bit and the laptop has 4GB of RAM / P7350 Intel Centrino 2 - so is pretty powerful.

2) The second issue is that when I press the 'sound' touch key, the white lights and the white bar above the touchpad become unlit. When I press this again the lights come back on but it doesn't mute the sound. Only when the the laptop is put to sleep mode and then woken up again, does the key work correctly. All others work fine. Does anyone know whats causing this?

I have exchanged this laptop 3 times now and all of them have done issue (2) this but surely this isn't normal.

Any help or advice to rectify these issues is very much appreciated.

Thanks

Answer:Satellite U400-15B hangs on Internet and Touch media keys issue

1) Have you tested an other internet browser? For example Firefox.
I use Firefox for years and never had problems with it. I like Firefox more than Internet Explorer, it?s faster and you will get a lot of useful add-ons for it like ScrapBook.

2) Have you tried to update the BIOS? Look on the Toshiba website to find a newer version:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers

I have a Satellite U400 too and it works without problems.

6 more replies
Relevance 53.3%

Recently my soft touch keys stopped working. My laptop is only about 4 months old. Had been working fine up to this point. No new software had been placed on the laptop in the week prior to the soft touch keys stopping work. I tried to use the FN and function keys but they did not appear to do anything.
I tried rolling back to a previous system restore with no result. I've uninstalled and reinstalled the value added package as suggest several places in this forum and the most that has achieved for me is to kill some internet bandwidth and my time.

Is there a solution for this or am I going to have to send this in as a warranty repair?

I've noted searching the web that this appears to be a common problem across all Satellite series Laptops. Is there a common error here?

All Help appreciated.

Answer:Satellite P750 - Soft Touch Keys no longer work nor do FN Keys

Hi

Beside the VAP installation, the Flash Card Support Utility has to be installed too.
The Flash Card Support Utility control the FN buttons?

If this does not help, you have one other option: you can recover the notebook to factory settings? of course this is ridiculous method because the HDD would be formatted in such case? so before doing that, backup the data first.

1 more replies
Relevance 52.89%

Notebook as such works perfectly BUT as i constantly update it, i noticed that lately every update is basically reinstalling certain applications.

What i noticed, i lost fn keys / hot keys and toshiba assistant.


Looked at driver support but with no luck.
Help to put it bck to a state where all works.

Answer:Satellite P750 - lost FN keys / hot keys and Toshiba Assist

I don?t know which model do you have exactly but you should be able to find all missing stuff on Toshiba download page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

Reinstall Toshiba value added package. This package contains several tools including flash cards utility and media buttons control.
Toshiba assist should be installed again.
Please check download page. If you need more help let us know.

3 more replies
Relevance 52.89%

Hello,

1) i am asking for your help about installing my Fn keys drivers for my Satellite A200 14 D PSAECE laptop.
My OS is Windows XP and i have Bitdefender Internet Security 2009 .
From the download page of Toshiba drivers i got all drivers for my laptop (36 of all - or close), but from the many Xp reinstalations i have done on my laptop, only one time all Fn keys worked when pressing Fn+key and the corresponding icons appeared on my display. I have read some forum topics and i understand there is a problem about the order in which i have to install them ( i already installed them all but it is not working ), so i need someone to tell me which are the drivers for Fn keys only and in which order to install. Please do not forget that i can deactivate my Bitdefender but not uninstall .

2) the same problem with the preset buttons above the keys - On-Off, Internet, Media Player, Play-Stop-Rewind, i need the exact driver and the order.

Thank you for your time :)
Sorry if this question is already answer in the forum somewhere, but i could not get this exact answer.

Answer:Satellite A200-14D PSAECE - Fn keys not working & other function keys

Hi

I remember that the BIOS should be updated to the Win XP version on Satellite A200 series.
There are two different BIOS versions and depending on the installed (Vista or Win XP) the right version should be used.

But there are many FN buttons which needs additional installation of different tools.
For example the Touch Pad On/Off Utility should be installed to use the FN+F9 buttons.

Furthermore you should install the Controls Driver 2.49.2.5C and Controls 3.22.2701 in order to get the Toshiba Control buttons functionality.

6 more replies
Relevance 52.48%

Hi,

I installed new Vista Business 32bit and I have problem with FN keys - when I push this key I don?t have up on the monitor option icons.... why?
And 2-nd problem witch touch keys (ECO and key for light off) whet I push eco key - this function is not working and when I push key for light off it?s the same...

Does someone know why?

I installed drivers from Toshiba website...

Answer:Satellite A500-132 - FN keys and touch keys donít work

You don't need drivers only. Have you installed all Toshiba tools and utilities?
Be sure Value added package is installed.

6 more replies
Relevance 52.48%

I just bought my Satellite C870-12F, and I noticed the Function keys (F1, F2 etc.) only work when using the Fn key, I was wondering if I can 'swap' them, so that I have to press Fn first, and then increasing brightness for example.

I'm used to have the F keys to be primary, without an additional key required to activate them.

Answer:Satellite C870-12F - Swapping FN keys and Function keys

As far as I know you cannot change anything.
Flash cards keys (Fx) can be used in combination with FN key only.

3 more replies
Relevance 51.25%

Hello
I am new with this forum, hope i will welcome here

I want value added package for working FN button properly with software

My OS is windows 7 32 bit
Toshiba C660-A041
Part Number : PSC1NV-026019AR

Thanks for help me

dB :)

Answer:Need VAP for Satellite C660

I?ve checked Toshiba support page for available drivers and your notebook model is not supported for Win7 32bit.

Try please to install available VAP for some older supported model.

1 more replies
Relevance 51.25%
Question: Satellite C660-23M

My laptop wanted to do 3 updates last night when I shut it down - don't know what updates - but after bout 30mins of doing nothing I turned the power off. It's now npt doing anything!! Power is on & initially got a Boot Menu box with info on but now the HDD/SSD info that was showing has disappeared. I'm a real non tech person so haven't a clue what's happened or how to sort it. Wasn't having any problems at all until the laptop tried to update last night. Can anyone help??

More replies
Relevance 51.25%

I have the very annoying problem of key lag on my laptop which is a satellite C660 1-f-1 .

I've had the laptop for around 3 months and have tried the keyboard settings on all settings to no avail. I paid ?350 for this laptop and I'm getting increasingly aggravated !

I've read that the problem has cropped up with other models and that removing and then replacing the battery helps.. but I can't keep doing that mid conversation or e-mail !

I keep reading about these update download bios but have no idea what that means . Could somebody please explain in a plain English non-tech speak style please ?? !!

Answer:Key lag on Satellite C660-1F1

Hi Helenuk1963

A BIOS update is something that makes the main brain of the laptop smarter but this does not 100% mean it will fix it the normal fix is to run a recovery of the unit via the HDD by pressing F8 non stop on startup and selecting repair your computer then login and select Toshiba HDD recovery but before you do this make sure you have backed up all your data and created recovery disks via the toshiba recovery media creator in the start menu.

if you do want to run a BIOS update best thing to do is call Toshiba direct who can walk you though it and at least if something goes wrong it will be covered.

2 more replies
Relevance 51.25%

Hi!

My model is Satellite C660-1LD .
I want to add 4 GB RAM to my laptop.

There is now 4GB RAM DDR3 *(1066MHZ)* on my laptop.
Can I add, or is it better to add 4GB RAM DDR3 to the second slot with *(1333MHZ)*?

And what frequency my computer will work? (1066mhz or 1333mhz).
What better RAM to add( brand, frequency) you think?

Also the RAM I found is Unbuffered, what it means?

Thank you!

Answer:Satellite C660-1LD - I want to add 4 GB RAM

> Can I add, or is it better to add 4GB RAM DDR3 to the second slot with *(1333MHZ)*?
This depends on your chipset.
If your chipset supports 1333Mhz then the RAM will work with full performance, otherwise it would be clocked down to 1066Mhz.

1 more replies
Relevance 51.25%

Hi all,

I crashed my MBR against a standard MBR.
Do you have a C660 MBR so that I found the recovery?

Thank you in advance :)

Answer:Satellite C660 - I'm looking for an MBR

> Do you have a C660 MBR so that I found the recovery?
If I understand you right you cannot start HDD recovery installation, right?

Have you created recovery DVD?

4 more replies
Relevance 51.25%
Question: Satellite C660

My brother has a Satellite C660-1H6 laptop. Unfortunately his HDD went bad.
I installed a new HDD and reinstalled Windows 7 Home Premium, which was originally installed on the laptop.
Setup accepted his product key and installation went relatively smooth, only problem is that after installing the drivers, I cannot connect to wireless network.
Laptop uses an Atheros wireless card, model AR9285.
Things I tried, following forum suggestions:
-Allocate a MAC address instead of "Not present" to the wireless adapter.
-Changing various drivers, including the one from Toshiba page and some from the Atheros page.
-I installed ALL the drivers, I don't have any unknown device or exclamation mark in device manager
-Installed ConfigFree, Flash cards support utility, Value Added Package, Wireless LAN indicator (some users select that some of these are needed)
-I ran Windows troubleshooter
-I did a factory default reset in BIOS
-Although I did not change the antennas before, I also tested the wireless with the 2 antenna connectors replaced the other way on the wireless card.

Fn+F8 works, I can enable/disable the wireless. I can see a list of available networks, including mine. When is try to connect, it asks for password. My router is using WPA2-PSK authentication and AES encryption. I type the password, it tries to connect, but I get the following error message:
"Windows was unable to connect to XXX" (I replaced the SSID of my network with XXX)
After that... Read more

More replies
Relevance 51.25%

I dunno know what's going on but I can only use FN + 3/4. It's crazy, 'cause I've got this computer only few weeks...

Answer:Satellite C660 cannot use all the FN key

also interested in this problem
updated windows and fn panel ceased to appear
only works fn +3 fn +4
do not tell that to establish a panel to fn resonant work?

2 more replies
Relevance 51.25%

Hello all,

Yesterday all of a sudden, the laptop screen went blank. Upon turning it on several times, the screen still doesn't turn on. By connecting the monitor to a external monitor via VGA (my TV), the TV does show up the screen, but has several flickering horizontal lines showing, thus obscuring part of the screen (http://i.imgur.com/83RO8xg.jpg - ignore the windows behind, I was testing the sound - and it works).

I have tried several solutions on the web (like removing the battery and AC cable and pressing the power button, and interchanging the RAM card in the slots), and not surprisingly, nothing worked as I think my problem is not similar. Windows 10 just boots to a blue screen with a sad face and a QR code (I don't even know...), while Linux Mint does boot and gives a message of "running without hardware acceleration". I couldn't get any diagnosis on Linux to check if it's a problem on the graphic card or the motherboard, so I am turning to these forums to check if anyone had any similar problem.

Thank you.

More replies
Relevance 51.25%

Hi

I was wondering what CPU's the C660/01m can take. It's an i3 but can it take i5 or i7?
Is there a list of all its technical info?

Thanx

Brian

Answer:Satellite C660/01m What CPU can I use?

Have a look at the other C660 models, if they have an i5 then your model should be able to take the same CPU.

2 more replies
Relevance 50.43%

My Satellite C660-26Z laptop has not got a HDMI port socket,
so how can I connect a cable from laptop to use my TV screen.

Maybe, I need to use the external monitor port ( VGA ) socket on my laptop with a special connection cable ? Please let me know, Thanks, Terry.

Answer:How to connect Satellite C660-26Z to TV?

Hi

This depends on the available TV ports.
Check the ports that are supported by TV. Recommend also reading the TV user manual to get more info about available ports.

Fact is that notebook supports just an RGB (VGA) out port. No HDMI or no DVI port is available. So you can use just an VGA cable?
Now the question is what port can be used in connection with VGA cable.

2 more replies
Relevance 50.43%

Hi lads, I just want to ask some experienced peep. What is maximum ram I can fit in my Satellite c660? As much I google around its says 8gb (1066 MHz). But I`m looking on DDR3 16gb 1600MHz. What do we think?
http://www.amazon.co.uk/Corsair-CMXS16GX3M2A1600C10-Vengeance-Performance-So-Dimm/dp/B0076W9Q5A/ref=sr_1_26?s=computers&ie=UTF8&qid=1350659763&sr= 1-26
or play it safe and pick up
http://www.amazon.co.uk/gp/product/B006EWUOL8/ref=ox_sc_act_title_1?ie=UTF8&smid=A3P5ROKL5A1OLE

Message was edited by: kri.ws


Another question : What is So-Dimm?

Message was edited by: kri.ws

Answer:RAM upgrade for Satellite C660

> What is maximum ram I can fit in my Satellite c660?
Can you please post exact model number (C660-xxx)?

6 more replies
Relevance 50.43%

Hi!

I have a Toshiba C660-1DN laptop, i've bought it in October. My problem is, that the cooling fan starts in the first 2-3 minutes, and it keeps running, until i shut down the computer.

It is loud, and very annoying.
I have installed all of the drivers, updated the bios to 1.8, changed the cooling method in Windows, changed the CPU frequency in bios to "Always low", but neither helped.

It is interesting that, it has the same noise, if i play an FPS games for hours, and if i write text in Word, or browse the internet... I've bought a coolpad, but it isn't helped too.

The air - which flows out on the left side - is quite cool, but comes out with a large speed. I've used some other laptops, (Acer, Dell, HP) but they flows out warm or even hot air.

_Temperature details (AIDA64)_: (The machine is on a glass table, balanced energy saving mode)
1. CPU / 1. core : 61?C
1. CPU / 2. core : 58?C
PCH : 66?C
IMC: 65?C
GMCH: 27?C
GPU diode: 53?C
TOSHIBA MK2565GSXV : 33 ?C

_Cooling fans:_
CPU : 3093 RPM (103%) ???
GPU : 30%

My question is that, is it normal??
Thanks for the replies! :)

Answer:Satellite C660 noisy fan

> I have installed all of the drivers, updated the bios to 1.8,

It seems that there is a new BIOS version v1.9 for Satellite C660 PSC1JE available on the Toshiba European driver page. You can try to update the BIOS.

Additionally try this settings Power Plane settings:

_1st Proposal:_
Cooling Method: Maxim Performance
Intel Turbo boost Technology: Enable
CPU Frequency mode: Always low

_2nd Proposal:_
Cooling Method: Battery Optimized
Intel Turbo boost Technology: Disable
CPU Frequency mode: Always high

Here you can find the single options:

<Setting Method>
Changes in Operating System:
Control Panel --> Power Options --> Change plan settings --> Change advanced power settings --> TOSHIBA Power Saver Settings --> Cooling Method

Changes in Bios (Power Management):
Intel Turbo boost Technology

Changes in Operating System:
TOSHIBA HW Setup --> CPU Frequency mode

4 more replies
Relevance 50.43%

My brother has a Satellite C660-1H6 laptop. Unfortunately his HDD went bad.
I installed a new HDD and reinstalled Windows 7 Home Premium, which was originally installed on the laptop.
Setup accepted his product key and installation went relatively smooth, only problem is that after installing the drivers, I cannot connect to wireless network.
Laptop uses an Atheros wireless card, model AR9285.
Things I tried, following forum suggestions:
-Allocate a MAC address instead of "Not present" to the wireless adapter.
-Changing various drivers, including the one from Toshiba page and some from the Atheros page.
-I installed ALL the drivers, I don't have any unknown device or exclamation mark in device manager
-Installed ConfigFree, Flash cards support utility, Value Added Package, Wireless LAN indicator (some users select that some of these are needed)
-I ran Windows troubleshooter
-I did a factory default reset in BIOS
-Although I did not change the antennas before, I also tested the wireless with the 2 antenna connectors replaced the other way on the wireless card.

Fn+F8 works, I can enable/disable the wireless. I can see a list of available networks, including mine. When is try to connect, it asks for password. My router is using WPA2-PSK authentication and AES encryption. I type the password, it tries to connect, but I get the following error message:
"Windows was unable to connect to XXX" (I replaced the SSID of my network with XXX)
After that... Read more

More replies
Relevance 50.43%

Hi guys ive had my laptop a few years now and it used to be fast and reliable a great laptop and all of a sudden it's just gone really slow it almost says not responding on anything I click and isn't the same as it used to be I've tried reinstalling windows but it does nothing it's like it's not responding sometimes and is very laggy any advice is welcomed

More replies
Relevance 50.43%

Hi

I recently purchased a Satellite Pro C660 PSC0MA-01K00V from a online seller with all warranty covered. It came as a usual model would come like but with 6GB RAM. I thought it was a great buy so I bought it.

After it arrived, I looked at the specs on the website and it said the max is 4GB RAM. I dont know what happened. The memory in the machine is 1x 4GB Kingston 1x Samsung (original).

Could you tell me what it is and if I can probaly then even fit 8GB?

Answer:Satellite Pro C660 - Upgrade to 8GB RAM possible?

Hi foolman555,

Why you don?t believe the official specifications?

Satellite Pro C660 has Intel GL40 Express Chipset and this chipset is limited to 4GB RAM. That means your notebook supports only 4GB RAM and not more.

But usually 4GB is enough for the most applications and I don?t see a reason that an upgrade to 6GB would be so important ;)

10 more replies
Relevance 50.43%

Several times after putting it on sleep, I've come back to find it's turned itself on! I've only noticed this while it's set to sleep never while it's totally shut down/turned off. It's a Satellite C660-1UG (France)


This is my second Toshiba, my last one also a Satellite had the exact same problem!

Answer:My Satellite C660 turns on by itself

Check please BIOS settings and disable options wake-up on LAN or wake-up on keyboard.

4 more replies
Relevance 50.43%

Hello!
I bought a Toshiba Satellite laptop C660-1CH and please tell me where I can download and its drivers needed. 2 days I struggle to find this type of laptop drivers for Windows XP SP2 but I have not found anything! *Please help!*

My laptop configuration :
Processor
Intel ? Core processor i3Tehnologie: 32 nmModel Processor: Processor 380MFrecventa: 2530 MHzCache: 3072 KB Processor Manufacturer: Intel
Display
Resolution: 1366 x 768Diagonala: 15.6 inch display Special features: TruBriteTehnologie HD Display LCD LED
Memory
Memory: 3 GBTip DDR3 Memory Limit: 8 GBNr slots / slots occupied: 2/2Frecventa: 1066 MHz
Hard Disk
Hard Disk Capacity: 320 GB Rotational Speed??: 5400 rpmTip Hard Disk: SATA
Video Card
Video Memory: 512 MBTip Video Memory: Dedicated Series: Radeon Mobility video chipset Manufacturer: ATIModel: HD 5470

Multimedia
Units read / write DVD RW Audio: Speakers stereoCititor Card: Yes
Web Camera: Yes
Ports
VGA: 1RJ-45: 1 Audio: 1Microfon: 1USB 2.0:2
Communications
Network: 10/100Bluetooth: DaWireless 802.11 b / g / n
Food
Battery: 6 Cell Lithium Ion Battery Life: Up to 4 hours 30 min
Other
Weight: 2.3 KgDimensiuni (W x D x H): 380.5 x 254 x 28 - 35.6 mm Numerical Keyboard: Yes
Color: Black
Software
Operating system: Windows XP SP2



P.S :Sorry if I posted right place

Answer:Need WXP drivers for Satellite C660-1CH

Hello

Visit please Toshiba download page under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

There you will find WXP drivers for your Satellite C660 (PSC1JE).

If you need more help you are welcome.

4 more replies
Relevance 50.43%

My daughter's laptop keeps freezing; I have used the internal `Repair' to set it back to the factory settings, but it is still the same. I have been told that it is a common symptom of a faulty hard drive, for which I was quoted approx £170.00 to replace and install the operating system. I am not a computer technician, but as I was a tv engineer, so feel that fitting a new HDD is within my capabilities, and as a replacement HDD from Toshiba is £80, this seems the logical thing to do; however before I buy a new HDD, can anyone tell me if it is correct that the freezing may be the result of it failing? I would just like the opinion of other people with computer knowledge before I spend my money, and I will not blame anyone if I choose to follow their advice and it doesn't cure the problem.
Any advice would be very welcome.
David

Answer:Toshiba Satellite Pro C660 - 1ux HDD

FReeezing PC

Overheat due to faulty / blocked fans
PSU voltages (not applicable to laptops)
Household power surges fridge etc switching on/off (does it freeze when running on battery only?)
faulty memory stick try memtest click here virus or spyware scan for both especially if shutting down with in a few minutes of switch on or internet use
driver conflicts especially graphics cards get the latest drivers for your equipment.

You can run a check on the drive. In explorer right click the drive select properties - Tools tab - check drive.
It may also freeze if there are a lot of windows open at the same time and cpu is at 100%
Or if there is not much spare space on the drive.
Model of toshiba laptop? Most hard drives ae easy to change as located under a cover on the base , some are harder to get at as may be under the keyboard. We can probably find a Youtube video or strip down instruction easy enough.
If it really is the drive then you an image the whole drive to an external drive using the free Macrium reflect make the rescue media from the same program - fit a new drive and restore the image to the new drive.
5.

10 more replies
Relevance 50.43%

I was watching a film on my Toshiba Satellite C660-17E and all of a sudden the computer powered off as it gone in to hibernate mode, so I plugged the power. I could see two lights in front of the laptop one from the ac power and the other to indicate the computer was on.

So I tried to re-start the computer I could hear it powering but nothing on the screen, so I i thought my LCD screen was gone, so I tried again switching off, unplugging, removing the battery, and putting the battery and the ac power back just to notice that the ac power now is not working because the power indicator light is no more coming on, only the green indicating that the computer should be on but there is nothing on the screen.

1) so now I will list what is happening when I try to switch on.

when I press the power button - I can here noise as if want to power up but nothing on screen for a couple minutes the I here some activity but with very low noise.

2) ac power not working anymore when plugged to the lap top.

the green light to indicate the laptop is on is working as the battery still have some power but I know when the battery go flat I will have nothing

so all I have is one green light a bit of noise for a couple minutes and the fan works , no BIOs, no windows, no battery charging,

so I don't know if is the LCD, MOTHER BOARD or else


can some body help please

Answer:Satellite C660-17E just died on me

Hi

I don?t think its an display issue? but you can connect an external monitor to the notebook just to be 100% sure that its not a internal display issue?.

But from my point of view your motherboard or an part on motherboard (CPU/GPU) is faulty.
What to say? its time for an professional help?
I recommend asking an Toshiba ASP for an hardware check?

7 more replies
Relevance 50.43%

Hi friends

I have Satellite C660 its built-in mic and external mic not working
Can any one help me?

Answer:Satellite C660 - mic is not working

We don't have enough info to understand your problem.
Which operating system do you use?
Is sound driver installed on your machine?

When you open control panel > sound > recording, is any recording device listed there?

5 more replies
Relevance 50.43%

I find alot of batteries online, but my main concern is that. My laptop is Satellite C660-1M0 (ps1ge-02901fgs).

I find batteries that claim is for c660 but they reffer as (PA3634U-1BAS),some reffer as c660d and some reffer as c660 (PA3634U-1BRS). I am a bit comfused, is any compatible??

Thank you

Answer:What battery do i need to buy for Satellite C660?

When you remove original battery you can see which part number it has. In my opinion best thing is to order the same battery model. Using this part number you can try to find some online store where you can order it.

On the market you can find many batteries offered by some third part manufacturer (without Toshiba label on it). Such batteries are cheaper that original batteries by Toshiba. They could be good but usually they are dead pretty fast.
Last year I ordered such battery for my old A300. Battery was OK but I could not get it in place properly. The battery was in place but at the back side there was some kind of pressure and the plastic was out of shape. Anyway, it is your decision what to do.


Compatible batteries for your Satellite notebook have follow part numbers:
PA3757U-1BRS
PA3787U-1BRS
PA3817U-1BRS
PA3818U-1BRS
PA3820U-1BRS

Good luck

1 more replies
Relevance 50.43%

I bought two 4GB PC3- 10600 1333MHz CL9 for my Satellite C660-1cl.I put them in and when windows trying to load laptop just shuts down.

Any suggestion?

Answer:RAM upgrade on Satellite C660-1CL

i presume there is compatibility problem. Many people have reported about similar issues. RAM must be upgraded with high quality and 100% compatible parts.
According notebook specification your notebook model can be upgraded up to 8GB and compatible 4GB modules have part number PA3677U-1M4G (DDR3-1066).

5 more replies
Relevance 50.43%

When can we expect to be able to download the driver software to enable an upgrade from Windows 7 to Windows 10?

And, when is Toshiba Support going to have enough staff to take calls within a reasonable time-frame? Sorry but a wit of 10 minutes on a premium rate number is not acceptable!

More replies
Relevance 50.43%

Hello,
I am going to download this new Windows 8 Preview..
Will it accept the drivers for my laptop??
My laptop is TOSHIBA

*MODEL NAME*: SATELLITE C660 - 1M0
*PART NO.* PSC1GE - 029002AR
*SERIAL NO.* 6B206893K

Answer:Windows 8 on Satellite C660-1M0

Untl now I didn?t make some experiments with Win8 but I think there should not be problem if you use Win7 drivers.

Create recovery DVD and make test with Win8. If you don?t like it or you will see that there are problems with drivers, tools or utilities installation you can install recovery image again using created recovery DVD.

I think you are the first one with Win8 and it will be nice if you can make short report about all this. It will be interesting to read your experience about it.

16 more replies
Relevance 50.43%

the story goes...
bought a c660 last october 2011 and it failed and was replaced in april 2012 this year.
it now won't boot into windows - it goes as far as the windows logo but after a period, shuts off and retries.
won't go in safe mode - it stops at the same place every time and does nothing until the power button is pressed.

questions -

hardware or software related?
will toshiba give a damn or will they say "out of warranty"?

in my mind toshiba should offer a replacement as a month out of warranty is just not good enough

Answer:Satellite C660 won't boot

On this virtual way it is not easy to say what is wrong there.
My advice: if you don?t have some important data saved on HDD set BIOS to default settings and install OS again using recovery DVD (I hope you have created it).

Please do this and check if Windows starts properly.

I cannot say anything about warranty. You must clarify this with Toshiba service provider.

2 more replies
Relevance 50.43%

Yesterday we purchased a Satellite C660 with Windows 7 64bit installed. Worked just fine but today the laptop does not start up again. Updates were installed but after pressing the power button the light of the hdd turns on for a few seconds, the vents work for two seconds and then ... nothing !

Please help !

Answer:Satellite C660 does not start up

You cannot start notebook at all?
Can you enter BIOS settings with F2 at start up?

Which updates have you installed?

If nothing works you have only one choice: either bring it back to your local dealer and ask for replacement or contact Toshiba service provider directly. They can check hardware and help you with this.

5 more replies
Relevance 50.43%

Hi all,

Just got a new Satellite C660 PSC1LA-00J001 laptop which originally had 2gb ram in the shop but was upgraded with another 2gb to make 4gb (upgraded instore). Have unpacked from box and plugged in all power cords etc., pressed power button and a red light came on. After a little bit another green light came on. After another little while both lights went green. The screen however stayed black. I left it like this for the two and a half hours recommended for set up time but it hasn't done a thing since. I've tried to power off by holding the button down for some seconds but it's still not responding.

Does it sound like this problem is to do with the new ram module that was placed in it? I'm not sure I'm confident enough to have a go at removing it and retesting or not. Should I take it back to the store? Or do you guys have any ideas to try. I don't want to wreck the laptop when I haven't even used it yet. I know a little about computers but am not confident in trouble shooting with my limited knowledge. Any ideas greatly appreciated.

Answer:Satellite C660 - Is not turning on

Hello

The initial setup can only be done if your notebook starts properly and Windows must be started. If you don?t see something on screen it seems to be a serious hardware malfunction.

Anyway, such things shouldn?t happen on a brand new notebook and in your case I would return the notebook and ask for a replacement model. I?m sure the seller has other C660 models in range so take another one that you can be happy with your new Toshiba computer ;)

2 more replies
Relevance 50.43%

I have a Toshiba Satellite C660 ... a message appear every time I open it tell me that I have a hard disk problem and in the details it told me that I have a hard disk failure and I must do a backup for my data and I must contact my manufacturer.

Can anyone tell me what that is and what to do?

Answer:HDD failure on Satellite C660

At first make data backup to be sure nothing will be loosed if HDD will crash soon.
Copy all important data on external HDD. It is best and easiest way.

Has your notebook valid warranty? If yes I recommend you to contact nearest Toshiba service and ask for HDD replacement.

2 more replies
Relevance 50.43%

I have a Toshiba Satellite C660-1NP and i want to upgrade the ram on it is.
The right ram to get or do i have to get diffrent ram

Please answer my question

toshiba user

Answer:RAM upgrade on Satellite C660-1NP

Hi

According notebook specification this notebook can be upgraded up to 8GB. It is delivered with one single 4GB module inside so you can obtain one 4GB and put it in empty slot.

Compatible 4GB RAM has part number PA3918U-1M4G. Using this part number you can find right and compatible RAM module for memory upgrade.

2 more replies
Relevance 50.43%

Hi All,

I bought a Toshiba Satellite C660 2R3 5days ago.

The laptop has core i5 2.4 GHz and 6GB of DDR3 Memory.
However i am very disappointed with its performance.

I run CPU ID/CPU-Z and it turned out that the laptop is throttling down to 978 MHz Core Speed at 99 MHz Bus Speed.
I checked the Bios setting with the intention of switching throttling off.
But was surprised to see there is no such option to do so.
You only have Constant LOW and Auto something.

WHY TOSHIBA???? WHY??????
Its like buying a Ferrari but you can only drive it at 50 miles per hour?

Does anyone know of a work around this? I would really appreciate your help.

Thanks in advance.

Answer:Re: Satellite C660-2R3 CPU Throttling to 978 Mhz?

Hi

You are right. The notebook seems to support the Intel(R) Core(TM) i5-2430M processor with the Intel Enhanced Speed Step Technology.

Enhanced Intel Speed Step Technology allows the system to dynamically adjust processor voltage and core frequency, which can result in decreased average power consumption and decreased average heat production. This is the reason why the CPU does not run always at highest level but this speed depends on notebook usage and this will be adjusted automatically by the system

7 more replies
Relevance 50.43%

My Satellite C660-1LD keeps restarting by itself. Does anyone know how to stop this?

Answer:My Satellite C660-1LD keeps restarting by itself

Hi

What happen exactly? Can you please explain what happen but more detailed.

3 more replies
Relevance 50.43%

Hi

I have a problem.
After updating the BIOS to the latest version of the laptop can not boot from the drive usb.
In the boot menu, this option is present, but can not boot.

Sorry. Google translate.

Answer:Satellite C660 will not boot from USB

Sorry but we don?t know what is saved on your USB stick and what you want to do exactly.

Enter BIOS and set it to default settings, restart notebook and press F12 at start up. In boot menu choose USB device and press ENTER.

What happen when you do this?

11 more replies
Relevance 50.43%

Hi to all,

my sister in-law bought her laptop up to me today because it switches on and goes to the windows logo then all of a sudden theirs a quick glimpse of a blue screen and then it shuts down re-starts and does the same.
i can press the f8 key and i get the boot options, ie recovery mode but it just does the same thing, i then tried a windows DVD in the drive and it boots from the DVD and installs the files but then hangs with just a black screen and the white curser, its not froze at this point i can move the curser around.

Does anyone have any idea what I can do now?
Thank you in advance for your time.

Answer:Satellite C660 won't start

Can you start OS in safe mode?

I cannot say for sure what the problem can be but maybe you should reinstall OS using HDD recovery option. I hope everything should be OK with ?factory settings?.

3 more replies
Relevance 50.43%

How exactly do you burn a DVD to the laptop? I have a Toshiba Satellite C660.
When I put the DVD into the drive and cick on Windows Media Player, there nothing to click on regarding "burn".

Answer:Burning a DVD to Satellite C660

>How exactly do you burn a DVD to the laptop?
I have installed Nero burning application and but my DVDs. I can burn data DVDs or movie DVDs. What kind of DVDs do you want to burn?
>When I put the DVD into the drive and cick on Windows Media Player, there nothing to click on regarding "burn".
I?m confused now. Why Windows Media Player? You need some good butning application that you can use to burn CDs or DVDs.

3 more replies
Relevance 50.43%

hello everyone,

i am new here and dont know how to make a post at the site so i am writing here!

i have a toshiba satellite c660-1fv and just made a format at the laptop
i install all drivers except th webcams because i cant i try a lot of time a lot of webcams drivers for my model but nothing,
it tell me not webcam detected, i check at the device manager and there is not the cameras one

please help

Answer:Satellite C660-1fv - no webcam

Originally Posted by klausikuka18


hello everyone, i am new here and dont know how to make a post at the site so i am writing here!
i have a toshiba satellite c660-1fv and just made a format at the laptop i install all drivers except th webcams because i cant i try a lot of time a lot of webcams drivers for my model but nothing,iit tell me not webcam detected, i check at the device manager and there is not the cameras one please help



If you go to this page https://forum.toshiba.eu/forumdispla...llite-C-Series there is a link at the top to "post new thread", this will allow you to post your own threads.

Clearly your webcam has not been detected, is there any chance that the wires from the webcam are damaged? was the laptop screen replaced?

7 more replies
Relevance 50.43%

Hello,

i have the Toshiba Satellite C660. On several pages I have to fill in my email adres on the internet it apears like: itsme"athome.nl instead [email protected] I do use the shift- 2 button= @ but it shows "

Can anyone help?

Answer:Satellite C660 - Can't get @ sign

Hey,

I would recommend checking other forum threads firstly before creating a new one. There are already some threads that you have to change the keyboard layout in Windows (control panel)

http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=58768
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59335

Check this!!!

1 more replies
Relevance 50.43%

Basically, my Satellite C660-2QN battery wore out the other day (1 month out of warranty, typical!).
I checked out Toshiba's replacements and decided to see if I could get a cheaper one.

I found on Amazon a replacement battery advertised as being for all Satellite C660S, it basically arrived today and I first noted that it said on the back it was modelled for Satellite Pro.

When I tried to fit it into my laptop, it was too large, though my mother, who insists it is correct, forced it in. It went fine for a while until the battery needed charging, at which point I plugged it in.

However, the battery doesn't charge, or if it does, very slowly. It's gone from 6% to 12% in around one-and-a-half hours. So I pose the question, does a Satellite Pro battery fit a regular Satellite C660?

If not, I'll keep using my old one as a placeholder and stay on AC power when it's in use.

Regards,
Ryan.

Answer:Satellite C660-2QN and new battery

>Satellite Pro battery fit a regular Satellite C660?

Satellite Pro C660-1KR PSC0ME supports 6 cell PA3817U-1BRS 10.8V 4200mAh size in mm: 206.8 x 45.1 x20

You Satellite C660-2QN supports the same kind of battery (model: PA3817U-1BRS ).

1 more replies
Relevance 50.43%

I know that maybe some of you may think this is a puerile question, but did Toshiba Satellite C660 - 1c7 become obsolete? The reason behind my question is that I cannot find this particular model on the Toshiba product page anymore. It used to be there last time I checked, around the end of March/beginning of April.

This issue came into my attention when I was browsing the driver download page, and when I wanted to narrow my search, the C660 - 1c7 model wasn't listed anymore. I also tried using the short model number, and the Toshiba product detector software as well, but still, no results.

Can somebody please help me with an answer?
Thank you in anticipation, and have a great day!

Answer:Did Satellite C660-1C7 become obsolete?

Hello

Your Satellite C660-1C7 has part number PSC0SE.
I have checked Toshiba download page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp and your notebook model is definitely listed there. When you open option ?Short Model No? it is listed as fourth from bottom up.

Please check it again.

2 more replies
Relevance 50.43%

I bought a new Satellite C660 the problem is I cant type @ by pressing SHIFT+2 I get this sign by pressing SHIFT+" why is this interchanged like this?

please help how to fix this. please help ASAP

Answer:Satellite C660 - Can't get @ sign

Hey,

Properly the keyboard layout and Windows language settings are different.

You should check the keyboard layout in Windows > Control Panel. There you can change this.

Last but not least the [email protected]? sign you can get if you press ?ALT-GR? + ?2?.

Check this!!!

5 more replies
Relevance 50.43%

Hi All,

I have a question about the Satellite C660 which I bought a week ago. Now I notice it uses DDR3 1066Mhz RAM, and with technology updating monthly, I am wondering if I was able to upgrade to DDR3 1333Mhz ?

I've read this model is upgradeable to 8GB RAM but cant find a speed upgrade post anywhere.

Answer:Satellite C660 - RAM Question

At first I must confirm that your Satellite can be upgraded up to 8 GB RAM and it is good decision to upgrade RAM to get more performance.
For upgrade Toshiba offers 4GB RAM with part number PA3677U-1M4G, so you can use two of them. This module is 1066 MHz.

Generally speaking you can use faster modules but that doesn?t mean your notebook will be faster than with 1066 MHz modules. If the FSB of mainboard is 1066 MHz faster modules must slow down and will work on defined ?speed?.

If your car can run with 250 km/h but speed is limited to 120km/h there is no much benefit for you, except maybe high gasoline usage. Do you understand what I mean?

2 more replies
Relevance 50.43%

Hello,

My C660 needs a new hard drive. It came with Windows 7 home premium pre-installed and I would like to return to that.

If I go to Microsoft to download windows 7 with my product key, it gives an error. I contacted MS support. I don't quite remember what they said but they couldn't help, possibly because it was a manufacturer installed version?

So If I get a new hard drive, how can I return to my previous OS, Windows 7 Home Premium?


Help please?

Answer:Satellite C660 needs new HDD - Windows 7

You can have previous OS (recovery image) if you install it using recovery media (DVD or USB).
I presume you didn’t create this recovery media in the past, right?

If you still can use your notebook and preinstalled OS try please to create this media using preinstalled recovery media utility. More about that you can read in user’s manuals document.

4 more replies
Relevance 50.43%

Hi
I wonder if someone can assist, the compter has bios win-1.90 issued feb 2012, looked today and they have issued new bios 1.70 dated 1/06/2012.

What gives there is no record of 1.90 version and I guess 1.70 is much earlier ??? and if one does a search on web (non Toshiba site) it shows toshiba 1.90 as latest.

Before anyone ask why do I need need Bios, some times have improvements

Thanks
Tony Miller

Answer:Re: Satellite C660/1J2 and new BIOS

I?ve checked Toshiba support page and you are right. Offered BIOS version is 1.70. I don?t know why lower version number is offered as latest BIOS update.

Anyway, check Toshiba page next days. Maybe newest version will be offered.
But let?s be realistic, if your notebook runs well you don?t need BIOS update. If you don?t have some serious problems don?t change anything.

3 more replies
Relevance 50.43%

Hi, Toshiba Satellite C660 users

I want to buy this model and know it's all specifications. I have just a question about fan noise. is it noisy one? Thanks to all replies in advance

Answer:Fan noise on Satellite C660-115

Dear, moderator. Please, remove this thread as i have already bought it :) It's nice laptop for office works, Internet surfing and fan isn't noisy as a500-1dn' one. Worthy to buy it!

5 more replies