Computer Support Forum

Satellite C660 - BIOS Corrupt

Question: Satellite C660 - BIOS Corrupt

I attempted to update the BIOS from 1.00 to 1.20 yesterday through WinPhlash64 and it froze halfway through the writing process.

I've read online that there is a crisis recovery mode and a Phoenix utility program that can help reflash the BIOS..but for different Satellite models (e.g. A350). I found the guide [here|http://forum.notebookreview.com/toshiba/469337-toshiba-satellite-a350-bios-recovery-phoenix.html].

Does anyone know if this will work and *why* Toshiba don't host the original 1.00 BIOS version on the product page for this particular model?

Any help will be greatly appreciated, thank you.

Relevance 100%
Preferred Solution: Satellite C660 - BIOS Corrupt

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Satellite C660 - BIOS Corrupt

Hello

I can?t say much about Crisis recovery tool for BIOS because everytime I did a BIOS update it worked properly so I never had a problem.

What I can say is be careful with such tools: You could destroy the whole ROM module and I believe nobody has tested this tool on C660 from Toshiba.

Such BIOS recovery can only be done from an authorized service provider because they have special tools from Toshiba I think so in your case I would get in contact with the guys to clarify the problem and they can help you go get rid of this.

Good luck! :)

1 more replies
Relevance 90.61%

The Satellite C660 had problems from start: Freezing Screen after startup and very, very slow. Also a HDD recovery did not help.

I tried a Bios Update and loaded the file that downloadable from Toshiba (version 1.7). The Bios Update did not complete and now the notebook does not work at all.

As the warranty is void I will now buy a bios chip in china and I am now looking for the bios file.

This is all very disapointing and a big waist of time and money.

Answer:Satellite C660 - Freez after Startup - Corrupt BIOS update 1.7

> The Bios Update did not complete and now the notebook does not work at all.
That?s really pity? it looks like the ROM module has not been flashed properly.
I think this was a problem related to the hardware since you had problems before updating the BIOS.
I think this affected the BIOS update procedure.

> As the warranty is void I will now buy a bios chip in china and I am now looking for the bios file.
Forget it mate?ROM module cannot be replaced? in most cases the ROM module needs to be flashed using an crisis disk?

Would recommend asking an Toshiba ASP for help and to reflash the BIOS using crisis disk.
This should not be very expensive?

By the way: did you see this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54395

1 more replies
Relevance 75.03%

I have a huge Problem:
When i Start my Satellite C660 the Computer says:

The file is possibly corrupt. The file header checksum does not match the computer ed checksum.

What can I do now? How can I restart my computer?
Thank you in Advance!

Answer:Corrupt file on Satellite C660

Can you start your notebook in safe mode?

3 more replies
Relevance 73.39%

Hi,
I'm looking for a link to a dvd driver for my
Toshiba Satellite C660, PSC1GA - 01E01M

TSST corp CDDVDW TS-L633C DVD/CD ROM DRIVES

I tried to play a dvd for my daughter and my Dvd didn't auto play and wasn't listed under my computer as a device. I looked for the problem in the control panel and found the

'Windows cannot load the device driver for this hardware the driver may be corrupt or missing'

I have tried to look for a driver to fix my problem but all I keep finding are downloads to driver repairers or updates that want money to fix the problem. I have had my laptop for a year and bought it with an extended warranty. This was the first time I tried to play a dvd on it. My daughter was soooo disappointed.

Any ideas???

Regards
BB

Answer:Satellite C660 - Dvd player driver is corrupt or missing

Wait a moment.
Is optical disc drive listed in windows explorer?
What is the status in device manager?

2 more replies
Relevance 71.75%

Whilst updating the BIOS the system froze at step 7 of replacing the BIOS code, needless to say the laptop will not boot as the BIOS is now corrupt.

I have the BIOS.BAK but need advice on how to restore the BIOS. I copied the BIOS.BAK to a usb stick and plugged this into the laptop and then powered on the system (I've tried holding down F, F2 and together). I can see that the usb stick flickers initially but clearly does not progress with the restore.

I hope someone might be able to advise how to use the BIOS.BAK file to restore the BIOS.

Answer:Satellite C660 - BIOS Update Failed, help needed to restore BIOS.BAK file

Unfortunately I cannot help you with this but check please this interesting thread - http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54395

3 more replies
Relevance 69.29%

Hi
I wonder if someone can assist, the compter has bios win-1.90 issued feb 2012, looked today and they have issued new bios 1.70 dated 1/06/2012.

What gives there is no record of 1.90 version and I guess 1.70 is much earlier ??? and if one does a search on web (non Toshiba site) it shows toshiba 1.90 as latest.

Before anyone ask why do I need need Bios, some times have improvements

Thanks
Tony Miller

Answer:Re: Satellite C660/1J2 and new BIOS

I?ve checked Toshiba support page and you are right. Offered BIOS version is 1.70. I don?t know why lower version number is offered as latest BIOS update.

Anyway, check Toshiba page next days. Maybe newest version will be offered.
But let?s be realistic, if your notebook runs well you don?t need BIOS update. If you don?t have some serious problems don?t change anything.

3 more replies
Relevance 68.47%

windows7 64 bit
anti virus f-secure from talktalk

downloaded BIOS_V200_WIN.EXE when got tempo alert today

clicked run as administrator
extracts files and brings up box
phoenix uefi winflash
analise old and new bios
winflash for uefi has stopped working
close program
event viewer shows

Faulting application name: winflash.exe, version: 1.1.26.0, time stamp: 0x4b0b90c3
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x02774020
Faulting process id: 0x1474
Faulting application start time: 0x01cd68c5e0d498a8
Faulting application path: C:\Program Files (x86)\UEFI WinFlash\winflash.exe
Faulting module path: unknown
Report Id: 1f73efe4-d4b9-11e1-a41b-b870f4c55a8a

also

Fault bucket 2563155615, type 5
Event Name: BEX
Response: Not available
Cab Id: 0

Problem signature:
P1: winflash.exe
P2: 1.1.26.0
P3: 4b0b90c3
P4: StackHash_e8ad
P5: 0.0.0.0
P6: 00000000
P7: 02774020
P8: c0000005
P9: 00000008
P10:

Attached files:
C:\Users\Ken\AppData\Local\Temp\WER2E9E.tmp.WERInt ernalMetadata.xml


and finally

Fault bucket 0, type 5
Event Name: PCA2
Response: Not available
Cab Id: 0

Problem signature:
P1: BIOS_V200_WIN.exe
P2: 4.65.0.0
P3: 7z Setup SFX
P4: 7-Zip
P5: Igor Pavlov
P6: 1
P7: 200
P8:
P9:
P10:

I am wondering if the f-secure anti virus is blocking the bios update

i do not want to remove it unless it is the culprit

Answer:Satellite pro c660-21d can not update BIOS

> I am wondering if the f-secure anti virus is blocking the bios update

Before running an BIOS update tool, you should close all running apps in the background and should disable firewalls and antivirus software too!

Furthermore the VAP (value added package) should be installed on your notebook.
The VAP is an Toshiba tool package which can be found on the Toshiba European driver page.

7 more replies
Relevance 68.47%

Hi,

I have a Toshiba Satellite c660-268, when I boot it displays the following ..

Intel UNDI, PXE-2.1 (build 083)
Copyright (C) 1997-2000 Intel Corporation
This Product is covered by one or more of the following patents:
US5, 307, 459, US5, 434, 872, US5, 732, 094, US6, 570, 884, US6, 115, 776 and
US6, 327, 625
Realtek PCIe FE Family Controller Series v1.23 (07/28/10)
PXE-MOF: Exiting PXE ROM
Reboot and Select proper Boot device
or Insert Boot Media in selected Boot device and press a key

And when I access the BIOS, the HDD/SSD and ODD are not present.

please help me am stack..

More replies
Relevance 68.47%

I have the same problem. Latest BIOS version for my notebook is 1.3 but on my is 1.4 installed?! Notebook is 10 days and I can?t work with it.

We have few C660 (PSC0LE) we bought tham on same day and they all have 1.3 and are working perfect. Only my is BIOS 1.4 version and it?s not good at all.

Please my question is how can I flash BIOS with 1.3?

Answer:Satellite C660 - How to downgrade the BIOS?

Hello

Why you have created an additional thread about BIOS? I mean this can be discussed in your other thread too.

Anyway: BIOS downgrade is not possible and can only be done from an authorized service provider in your country. On Toshiba website only the newest version is available so a downgrade is not possible.

2 more replies
Relevance 68.47%

Hello,
today I found out that somehow I had clocked my processor to just 1.3ghz. I googled that I have to install toshiba value added package. After successful installation my processor started working normally (max 2.8ghz).

Unfortunately it has caused massive overheating of my notebook. While I was downloading bios update(and surfing normal websites) temperature went up to 83?C! I'm just not doing anything it's going really high..(btw. I'm using cooling pad).

I found out that if I update bios(current version 1.5) it might solve/help(maybe) this problem. I downloaded both 1.7, 2.0 versions.

Version 1.7:
when I run it, it just throw an error:

---------------------------
Phoenix WinPhlash64
---------------------------
Failed to retrieve system BIOS information.
BCPSYS block signature was not found.
Error code: -100
---------------------------
OK
---------------------------


Couldn't find any solution for this..


Version 2.0
There is an error occured, please check below items.
BIOS version above 200. (I've got 1.5)
Battery capacity more than 10% (tested it with 8%)
AC is attached. (it wasn't attached)


Huh? I'm totally out. Computer is unworkable if I don't fix that overheating problem.(bios update)


Thanks for any help.

More replies
Relevance 68.47%

Hi all ...

I sat and would update the bios for my Toshiba Satellite C660-1TT (PSC1QE-01D006N5)

Sloopy as i was, i left the computer to get some coffee, *obviously one of my kids was there* and pressed some buttons. This resulted in the computer "froze" after a while i had to forced it to turn off.

Now the clock change back time and date every time I boot the computer and i can?t get wifi to work.
I tryed to reinstall the bios again but then get message that i already have the same or newer bios and installation terminated.

Someone who can tell if I can somehow trick the computer into thinking it is a newer version or mabye bring in the older again and then update?

Grateful for any help! Robert

(excuse my bad English)

Answer:Satellite C660-1TT - BIOS trouble

Hi

From my knowledge it?s not possible to downgrade the BIOS in windows mode because you will always get a notification that newer version is already installed.
From my knowledge the Toshiba ASP technician can downgrade the BIOS but only using the traditional (DOS) BIOS version.

But I would recommend testing this workaround.
Shut down the notebook. Remove the battery and disconnect the AC adaptor.
Now leave the notebook disconnected for a longer period of time? I think about 3-4 hours?
Then connect the battery and ac adaptor and access the BIOS pressing F2 while powering on the unit.
Here you should set the BIOS to default (F9) and save the changes.
Now boot the notebook and check how it would work.

Usually the date and time resets because the CMOS battery is empty. But I cannot imagine that this might be a problem here? however, you can charge the CMOS battery running the notebook on mains for 18-20 hours. During this period of time the notebook needs to be ON.

Check this

1 more replies
Relevance 68.47%

I have tried all the usual F2, Del and all othe F buttons including ESC, nothing works, i really need to get into my bios because my touchpad wont work.

Answer:Satellite C660-1U4 - can't get into BIOS settings

To be honest i don?t know what you want to do in BIOS.
If touchpad won?t work check if touchpad driver is installed properly and also be sure touchpad is not disabled. Use FN+F9 key combination to enable/disable touchpad.

2 more replies
Relevance 68.47%

Hey.

I just bought a new Satellite C660 24 hours ago. I installed all of the updates and programs for the PC to run smoother, but i can't install the Bios 1.50. It gives me an error when I try to install it.
When i go to see the current bios version it say it's in 1.20.

How can this be fixed?

Cheers.

Answer:Satellite C660 - Can't install BIOS 1.50

Hey,

Why you want to update the BIOS? Do you have any problems with your new C660 notebook?
I mean BIOS update is always a little bit risky so I would only do the update if it?s really necessary, otherwise BIOS update is no important and you can forget it.

Just have fun with your new notebook and enjoy it! :)

2 more replies
Relevance 68.47%

Hi.

We have Been having trouble with our battery so tried everything besides updating the BIOS.
The laptop hasn't had as n updated bios since 2012 anyway.

So went to Toshiba downloaded the right one. Got to programming block 17 then nothing the system froze.fan stayed on. It was on for a while so had to pull the plug before she overheated.

So obviously tried firing it up again. Blank screen. LEDs fine. DVD drives spins fans working. And one beep where it detects ram. Tried various combination of keys to no avail. So called tosh support.

They quoted 187 if they have to reflash and 275 to replace motherboard.
Now not stating the obvious not paying that I'd rather buy a nee one Lil


Basically as anyone got ideas how to do it yourself before i surrender on her

Answer:Re: Satellite C660-119 - BIOS fail

I don?t think you will be able to fix it but check
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54395

1 more replies
Relevance 68.47%

I have a C660-2E1 which has locked me out with a BIOS password, can any one help with how you reset the Bios password ?

Any advice would be appreciated.
Thanks in advance.

Answer:Re: Satellite C660-2E1 - BIOS Lock out

Unfortunately you cannot reset BIOS password and it must be removed by authorized service provider. They can help you with this.

To contact them check please http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

7 more replies
Relevance 68.47%

Hi their.

I need to update the bios of my Satellite C660. I download the install pack versionn 2. But I get this messege: "Tere is an error occured. Please check below items. BIOS version above 200. Battery capacity more than 10%. AC is attached."
So my current version is 1.5, battery full, and AC plugged.
What's the problem?

Thanks!

Answer:BIOS update on Satellite C660

Hi

Can you please post full model name of your notebook? I just want to check which BIOS version is offered for download.

By the way: why do you want to update BIOS? Is there some serious problem with your machine?

7 more replies
Relevance 68.47%

I have a strange problem with a Satellite C660-18C, and was wondering if anyone had any suggestions.

This is a friend's laptop that crashed a little while ago. He appears to have tried to reinstall an operating system, although not using the recovery media, which he never made when the notebook was new. He has not managed to do this, so asked me to take a look.

The hard disk is still the original Toshiba disk that shipped with the laptop, although it has been removed and replaced. This was done to do some basic testing on the hard disk, which showed no errors.

If you boot the laptop from a USB stick with a Windows 7 Pro installation image, you get as far as choosing a partition to install Windows on to. It shows "Disk 0 Unallocated Space 232.9GB"

However, it reports "Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure the disk's controller is enabled in the computer's BIOS menu."

I have looked in the Bios and I can see no trace of the hard disk. For instance, if you look under "Boot", this list only shows, CD/DVD, FDD, LAN and USB.

It seems to make no difference whether the SATA mode is set to "AHCI" or "Compatibility"

Does anyone have any suggestions?

Thanks

Answer:Satellite C660-18C HDD missing from BIOS

Usually good working HDD should be listed in BIOS (first BIOS page).
There you should see the HDD name and the size.

If first BIOS page does not provide any details about the HDD, then the HDD was not recognized by BIOS and in most cases this means that the HDD is faulty.

If you are 100% sure that this HDD isn?t faulty (for example it works in connection with another notebook), then an HDD controller malfunction could cause the problem?

But I guess it?s an HDD issue?

4 more replies
Relevance 68.47%

Hi

I've been using my Satellite C660-1D7 for a year now, and recently I'm having a wireless connection problem with my laptop. I can find the network in my laptop, but it constantly loses connection. It's kinda annoying.

So I tried to update BIOS update, but every time, it showed up ' There is an error occured, please check below items. BIOS version above 200. battery capacity more than 10%. ac is attached.' Well, I've checked mine, and it's 'TOSHIBA 1.40, 2011/1/21'.

Can anyone please help me out?

Thanks,

Answer:Satellite C660-1D7 - Cannot run BIOS update

>... but it constantly loses connection. It's kinda annoying.
Have you this problem with battery power supply only or the problem is there when notebook is connected to AC power supply too?

2 more replies
Relevance 68.47%

Hello I want to ask if there any way to update EC Embedded Controller
My lap top Satellite C660-1TK (PSC1QE-01900GGE) use american megatrends bios


In last time flashing bios the EC part not make to update...
i'm currency have BIOS 1.50 version
EC 1,40

Have some problems computer not runnig well, turbo boost technology not working properly my video driver stop working, wifi card slow my PC speed, Synaptec touchpad stop-start working randomly
I try evrything Recovery win 7 not help now im using win 8 with lthe last drivers
and its still the same.......

OR Toshiba will update bios version for this model soon?

Answer:BIOS update for Satellite C660-1TK

Hi

> My lap top Satellite C660-1TK (PSC1QE-01900GGE) use american megatrends bios

This is Toshiba European notebook model and the latest available BIOS can be downloaded from Toshiba EU driver page.
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU

The latest BIOS for this series is currently the BIOS 1.50-win
So your BIOS is already up to date.

6 more replies
Relevance 68.47%

Not displayed the first page (POST) at startup companies.
In the BIOS has changed something like "FAST POST CHECK == true"
In the upper left corner of the "_"
In response to pressing the ON at F2-F8 del does not respond (in the bios to get both?)
He opened the keyboard underneath the battery removed, the result got lost during a BIOS did not give signs of life.
Bios flashed to date, the zero on the ground.
OS starts OK
Help me!

Answer:Satellite C660 - Changed something in BIOS

Hi costy,

I?m a little bit confused about your posting. What does it mean exactly? You cannot enter the BIOS but Windows start properly, right?

Well, usually you can enter the BIOS if you press F2 key after you turned on the computer. So you have to press only one key to enter the BIOS and not both. Press F2 key several times until you see the BIOS setup.

Check this!!!

4 more replies
Relevance 68.47%

Hello,

I enabled the Quick Boot Function which skips the Logos and only boots from HDD, but now I need to install a 32bit Windows for School, but I can't enter or reset the Bios.

I tried every button combination I can think of.
Is there any way to remove this feature again without taking it apart?
The existing Windows is not the Original one, so no toshiba software is installed.

Thanks for help.

Answer:Satellite C660-2C3: Cannot enter BIOS

Hi

Did you try pressing F2 button while powering up the notebook?
Press F2 several times in the row? if this will not help press firstly "INS" key and then F2 to enter the BIOS

Good luck

4 more replies
Relevance 68.06%

Hello!

I need Drivers & BIOS for "Toshiba Satellite C660-M203". Please locate me the download link, I am unable to find the model # in the download section.

Thank you!

Answer:Need Drivers & BIOS for Satellite C660-M203

It is really crazy. I cannot find right page either.
Where you have bought it?

Can you please post full part number?

3 more replies
Relevance 68.06%

Hi,

Has anyone noticed that the fan comes on more frequently and makes more noise now than in the previous BIOS (1.80)?

I thought I had got round the noisy fan issue by running on an extremely low power/performance setting but I'm sure it's got worse now.

Answer:Fan noise with BIOS update 1.90-WIN for Satellite C660

To avoid some misunderstandings you should follow the first post you have created about the same theme:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=65847

1 more replies
Relevance 68.06%

I cant access my laptop Bios Setup - when I pres F2 , F11 or F12

*Satellite C660-24F PSC1NE*

It only statup Windows I cant access BIOS startup menu. I searched for BIOS updat for my model Satalite C660-24F - PSC1NE - and I didnt find on this web.

Can anyone help me please?

Answer:Can't access BIOS Setup on my Satellite C660-24F

Have you changed any settings in BIOS?
Have you maybe enabled fast boot option?

Please be sure you make regular shut down. Test also F8 option.

4 more replies
Relevance 68.06%

Hello.

I had trouble with flashing my bios on toshiba c660-1cj yesterday.

I have downloaded newest bios program and have followed all steps to correctly do flash...
When asked to restart, i have restarted laptop and now i am stuck on black screen and 5-6 seconds of working fan..

What may have been cause to this problem?

1b165571k is serial no.
http://support1.toshiba-tro.de/tedd-files2/0/bios-20120613151531.zip is bios link
http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm is the link to steps i followed.

can i get any help on this please?

Answer:Satellite C660-1CJ BIOS flash error

> What may have been cause to this problem?

Some background processes which could not be closed properly?
Some installed software like Antivirus, cleaners, etc?
Hardware problems???
Its simply not possible to say why an update did not function?

>can i get any help on this please?
As far as I know the ROM module should be flashed again using an crisis disk.
This can be done by an Toshiba service agents.

3 more replies
Relevance 68.06%

I downloaded bios-20120613151531 and extraected in a folder with same name.
But there I do NOT see the list as shown in the instructions but I see only "BIOS_V200_WIN.exe"
Double clicking that gives:
Installing UEFI WinFlash 0.02 - This program will be closed

What should I do?

Answer:Satellite C660 BIOS update does not work

>But I see only "BIOS_V200_WIN.exe"

This is also a zipped package?
You should unzip the BIOS_V200_WIN.exe by clicking right and choosing extract here.
Now you should get other files.

1 more replies
Relevance 68.06%

I have New Satellite C660-1TK (PSC1QE-01900GGE) In sunday i flashed with version 1,40 Without any problem
NOW i see that i have new version 1,50
Startting the bios flashing .exe
bios flashed done but the procces s not complete
after programing s done the Lap top freeze with big noise from the fan....
i needet to remove the battary and now

the version of the buios is 1.50 but EC version is 1.40 still the old becose the flashing is t not complete with succses....now i try to reflashed but show s me you are with the last et version of bios>!

Message was edited by: fensms

Message was edited by: fensms

Answer:Satellite C660-1TK - BIOS Update Go Wrong

To be honest you can be happy that your notebook works because many people have had bad luck after not successful BIOS update.

In my opinion you should not ?play? with BIOS updates. At the end you will damage BIOS update and your notebook will not start at all. Maybe you should contact Toshiba service provider and clarify this. Ask for help. They should do it for you. If something goes wrong it will not be your fault.

Be careful with this. It is just my opinion and advice for you. Don?t change well running system.

5 more replies
Relevance 68.06%

Hey everyone,

I use my Satellite C660 Notebook for some music production and I try to get my extern Presonus Audio Interface working. All is well so far except some occasional cracking noises in the AudioInterface. After fixing some things in Windows 7 that were recommended by tech support from Presonus these noises were still there.
So Tech support then gave me the following advice:

+"There are some power options that can be tweaked in your BIOS that may be causing the noise you are experiencing.+

+CPU Settings Section - Intel SpeedStep set to normal.+
+CPU Settings Section - Turbo Mode set to normal not turbo mode.+
+CPU Settings Section (if applicable) - Processor Operation Mode will have 3 settings, Normal, Fast, Extreme (??). Set it to 'Normal'+

+Power Settings: - C1E Support+
+Power Settings: - C3E Support (if it's there)+

+Save BIOS and restart.+

+Typically overclocking CPU's like the iSeries can cause the CPU power to fluctuate causing issues with noise on your audio devices, it is a new find and we are writing a FAQ that will be available on our knowledge base that will have a detailed description on the reasons why this occurs on over clocking CPU's.+

+Make sure any overclocking settings have been set to normal."+

*So for the first Time I entered BIOS only to find that none of these settings can be made on this Toshiba Satellite c660.*

Or can they somehow still be made? Are there tools, programs,...?

I hope someone can hel... Read more

Answer:Missing BIOS Settings Satellite C660

Hi

If the settings are not available in BIOS, you will not be able to change it or to appear it within the BIOS.

Mostly the Phoenix BIOS would be used by different manufacturers but the BIOS is always modified by manufacturers and configured for each notebook series.
Therefore particular settings are not always available in each BIOS.

I read in the presonus forum about crackling sound using dual core CPUs.
One guy could solve this using another USB port.

So maybe you should test all available USB ports.

Another option could be the usage of external USB hub connected to external power source?now quite sure if this would help to get rid of such noises but its worth a test.

Last but not least you could test this with connected and disconnected AC adapter

1 more replies
Relevance 68.06%

A customer with a C660-117 got a message from Tempro saying update BIOS. He did what he was told but the update crashed at Block 8 and would go no further.

Laptop will not boot now. Is there a BIOS recovery tool or does it need to be returned to Toshiba to be fixed. Customer not happy as it was Tempro that told him to update BIOS.

Any help greatly appreciated.

Answer:Satellite C660-117 crashed on BIOS update

Hi

Usually the BIOS update procedure is safety.
But some before executing an BIOS update, all applications and software like antivirus software, firewalls which run in the background should be closed.

However, as far as I know the BIOS flash ROM needs to be flashed/repaired by using an crisis disk?

Check also this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54395

But if it would not be helpful, you will need to contact an Toshiba ASP in your country to get it fixed.

2 more replies
Relevance 68.06%

Hi all

I was updating BIOS on TOSHIBA SATELLITE C660-13R from windows 7 64 bits. Downloaded driver from toshiba web. Half way the installation laptop freezes. I have left it for 40 mins to run but it did not get back to normal state. As motherboard fan has started to move on high speed I decided to take battery out. In result when I power back my laptop I have 1 beep from the motherboard and black screen.

Can some one help me please ?

Answer:Satellite C660-13R - BIOS update issue

Obviously the BIOS update procedure has failed. Something went wrong during the update process and it looks like the EMRPOM module has not been flashed properly.
This is the reason why the notebook does not work anymore.


Possible solution?
Well, if EMPROM isn?t damage, it should be possible to re-flash the BIOS module once again using special BIOS version and BIOS crisis disk.
Usually the Toshiba authorized service provider in your country should be able to re-flash the module using such crisis disk.

I read also in this forum that some people managed to re-flash the EPROM module using some 3rd party crisis disk found somewhere in the internet? but this did not work always?
So probably the ASP will be your last resort?

However, use the forums advanced search option to find related threads about the BIOS crisis disk? could be interesting for you

2 more replies
Relevance 68.06%

Hi there,

Trying to update one of my employees laptops with bios 1.50 (C660) and it is displaying an error message displaying 3 possible causes. Ac adapter not plugged in (it is) battery is less than 10% (it isnt) and BIOS is more up to date than version 1.50. When I tried the update the laptop was currently running 1.00. So I updated the bios to 1.30 with no problems but when trying to update to 1.50 it still displays the error.

Any ideas? Need to get the bios installed as it seems to fix the typing issues that the laptop has been suffering from.

Thanks

Answer:Satellite Pro C660 - BIOS update error

Hi buddy,

What operating system is installed at the moment?

For BIOS update it?s necessary that Value Added Package is installed and you run the update as Administrator. Make also sure that battery is fully charged.

What is the model number of C660?

6 more replies
Relevance 68.06%

Good Morning,

I have forgotten my BIOS password on Toshiba Satellite Pro C660, could you please help me as I have lots of work inside that I am working on.


if any further details required please let me know I am ready to provide them.



thank you very much

Answer:Satellite Pro C660 - Forgotten BIOS password

BIOS password can be removed only by an Toshiba authorized service partner.
If you don?t know the password, you need the help from ASP in your country.

2 more replies
Relevance 68.06%

I have a Satellite C660, sub model PSC0LE.

The (CPU) fan constantly surges on and off every minute or so. It is loud, and extremely intrusive / annoying. This is occurs regardless of load / CPU temperature. I have seen references to this issue, and some people have suggested that a BIOS update fixes it.

I have updated my machine to the latest available version (1.40) but this has not fixed it.

I note that this submodel (PSC0LE) doesnt have a BIOS update as late as some of the other variants (there is a 1.8 version for some of the other C660 submodels) and I think the fan issue is resolved in that.

Does Toshiba have plans to fix this on the PSC0LE via a new BIOS, or is there any other way to stop this as it is really distracting.

TIA,
dan

Answer:Satellite C660 - Fan surging constantly- BIOS fix

Try please to reduce cooling fan speed changing advanced power options > Toshiba power saver > cooling method.

For normal usage I recommend you to use balanced power plan and set cooling method to lower level. It should reduce cooling fan activity.

5 more replies
Relevance 68.06%

after updata bios my satelite c660 not starting and recive un message bip ,one long bip and 2 short bip
the screen is black
how i reinstal the bios in this condition
thanks for answer

Answer:Satellite C660 - BIOS updata failed

I’m afraid that BIOS is screwed up now. I don't know which BIOS and how you have installed but something goes wrong.

I don't know what you can do now but check please this thread - https://forum.toshiba.eu/showthread.php?54395

Following instructions there, maybe you will be able to fix the BIOS.

2 more replies
Relevance 68.06%

Good day, fellow Toshiba notebook owners.

I have a little trouble upgrading my BIOS to a "newer" (according to Tempro) version.
I just installed the Tempro application, and it detected that my BIOS needs an upgrade, so I naturally downloaded the "new" BIOS. Everything went fine, but when I tried to install it, a message popped up in the install window:

"*The program will be closed!* There is an error occurred, please check below items. Bios version above 190. Battery capacity more than 10%. AC is attached."

No matter what I do, I get the same error, over and over again. I looked the problem up before I posted this thread, and other people encountered it, but, unlike my case, advices like "Close all background applications", "Charge your battery", or "Make sure the AC is attached" really helped them.

I tried closing everything, my battery is always fully charged, as I rarely disconnect the AC adapter, and, of course, the AC connection issue is not the cause, since it is almost always plugged in.

I checked my BIOS version in +msinfo32.exe+ and it is 1.90 already, but I remember upgrading it months ago (sooner than the release date of this last version), and if, hypothetically, I have the last version already installed, why doesn't Tempro acknowledge it and keeps alerting me over a non-existent issue?

Maybe there is something wrong with Tempro, but I just need to be sure before... Read more

Answer:Satellite C660 - 1C7: BIOS upgrade issue

Hi

Tempro notify you about new uploaded drivers or BIOS?
The Toshiba European driver page provides all the drivers and BIOS files and the latest BIOS version 1.90-win has been uploaded at 04.06.2012 and therefore you received this notification by Tempro software.

Who knows why they uploaded this file once again.. but fact is that your BIOS is up to date and therefore you cannot update the BIOS once again using the one and the same version.

3 more replies
Relevance 68.06%

hi all
HELP ME to reset bios password laptop satilite c660

Answer:Satellite C660 need help to reset bios password

Hi

Is the BIOS password known to you?
No?

In such case ONLY the Toshiba ASP (authorized service provider) can reset the BIOS password.

1 more replies
Relevance 68.06%

Where do i get original BIOS file. I've got 1.00 version of BIOS and the support site says there's no available bios updates. But i still want original BIOS file V1.00.

Answer:Satellite C660-168 - Where to get original BIOS file?

> Where do i get original BIOS file. I've got 1.00 version of BIOS and the support site says there's no available bios updates

If you couldn't find ot on the toshiba driver age

http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

it means no update available

3 more replies
Relevance 67.24%

Bought a Satellite C660-22v on ebay which seems to work fine except none of the Tosh utilities are present.

I was going to reload the OS and downloaded the manual which say I need to set the BIOS to default. The previous owner has set the password on it and has told me what it is. What I want to know is, can I do the system restore without resetting the BIOS or how do I get the Tosh utilities?

Answer:Satellite C660 - missing utilities, BIOS not in default

To be honest I don?t understand what do you mean with these missing utilities. Fact is that this notebook was delivered with original preinstalled Win7 home premium. If you have recovery disc reinstall OS and start to use notebook with ?factory settings? that includes all Toshiba tools and utilities. If you want to install some of them additionally you can download them from http://www.toshiba.eu/innovation/download_drivers_bios.jsp

Generally speaking you can do system restore without changing BIOS settings but now when you want to use notebook from other person I think best thing is to remove BIOS password, set BIOS to default settings, reinstall OS and start to use notebook with original ?factory settings?. Later you can configure notebook and change the settings.

5 more replies
Relevance 67.24%

Hello everybody;

MODEL NAME : SATELLITE C660-115
PART NO : PSCOLE-00500KFR

My problem is now my laptop is dead : black screen with short bip (tnx to toshiba download support how show that the operation is easy)
I used Toshiba flash bios tool "phoenix flash 64", following the exact setup and at level 17 of 34 maybe he just frooz and nothing change for infinity time so i remove the battery with the sad knowledge that is maybe the end .

For the moment i don't wat to do, specially that i don't have a usb external floopy disk!!

is there any other solution withe usb flash memory?

More replies
Relevance 67.24%

Re: C660-1NR

I have lost the use of the function (FN) button.
I have recently upgraded the BIOS to the latest version about 2 weeks ago but did not notice anything wrong until I wanted to turn off the wireless mode last week.

Anybody know what has caused this?

Answer:Satellite C660-1NR - Lost use of FN buttons after Bios upgrade

Hi

Did you notice the problems with all FN buttons or only with the special combination FN + F8 which enables and disables the WLan?

Usually the Toshiba Flash Card Support Utility controls the FN buttons so you could try to restart this tool which you can find in All Programs ? Toshiba -> restart Flash Cards

3 more replies
Relevance 67.24%

Where I can get detail description about new changes of bios update dated 14/02/12, version 1.50-WIN for Satellite C660 PSC1NE ?

Answer:Satellite C660 - Where I can get detail description about BIOS update?

Hello

Unfortunately such info is not available for EMEA notebooks. On Toshiba US sometimes I found such info but at the moment there is no similar notebook with this BIOS update version.

Anyway, if everything is K with your notebook don?t change anything.

2 more replies
Relevance 67.24%

Computer is a satellite pro C660-29W PSC1ME-00U00KEN

I've set a BIOS supervisor password (no user password is set). I know the password.

If I hit F2 it enters the text editor but does not give any opportunity to enter the password, and so whilst I can view everything there is no way to change anything.

Any suggestions?

Answer:Satellite Pro C660-29W: BIOS won't let me enter the supervisor password

Can this be helpful?
http://aps2.toshiba-tro.de/kb0/TSB0B032D0000R01.htm

1 more replies
Relevance 67.24%

I have updated the BIOS on my Toshiba satellite C660 - 1ME to version 1.20-WIN from Toshiba website .
after that the BIOS startup screen disappeared, so now my laptop starts directly with Windows startup screen

I tried pressing any function key on startup, but nothing happened
I tried to re-install BIOS (both old and same new version) but I got error massage that I have "the same or newer version of BIOS"...

can you help me please?

Answer:Satellite C660 -1ME - BIOS startup screen disappeared

> I tried pressing any function key on startup, but nothing happened
You mean F2,F8 or F12?

2 more replies
Relevance 67.24%

Hey,

So I'm overhauling a C660-2JN, part # PSC1ME-01L00KEN, and having installed a clean Windows I got latest drivers for everything and went to check for BIOS updates.

If you visit the 2JN's page and go to the Driver section there is one BIOS listed: [v1.50-WIN|http://uk.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=UK&selCategory =2&selFamily=3&selSeries=313&selProduct=6019&selSh ortMod=3010&language=13&selOS=null&selType=null&ye arupload=&monthupload=&dayupload=&useDate=null&mod e=allMachines&search=&action=search&macId=&country =8&selectedLanguage=13&type=null&page=1&ID=80880&O SID=-1&driverLanguage=42] .
This is the BIOS that's already installed.

Now, the confusing bit is if I try to find updates via the ["Update your BIOS" page|http://uk.computers.toshiba-europe.com/innovation/download_bios.jsp?service=UK&banner_id=BIOS_DOWNLO AD_BANNER] it displays two newer results for the C660 -- 1.70 and 2.00.

I say "for the C660" because the part number of this machine doesn't exist in the bottom drop-down box, so I'm unsure how wide of a search I'm really doing.

I've extracted all three packages and they all use different flashers and have ROMs of different sizes, so I'm guessing the newer ones are for different spec'd machines, but it'd be nice to know (and, hey, maybe list compatible part numbers for stuff l... Read more

Answer:Satellite C660-2JN PSC1ME BIOS update confusion

Ah, I found my answers.

2 more replies
Relevance 67.24%

Hi,
I recently updated my BIOS on my Toshiba Satellite C660 to 1.70.
Everything went smoothly, but when I rebooted and tried to connect to the internet, it could not.

I thought this was a temporary error, but it has been 3 months and it still has not repaired.

Can you assist me? Thank you!

Answer:Re: Satellite C660 - after BIOS update cannot connect to the Internet

Have you tested it with WLAN and LAN connection?
Have you noticed the same problem using both connections?

2 more replies
Relevance 67.24%

Any idea how I can update a C660 PSC0QE from linux? It runs really well, but the keyboard issue is very annoying.

Answer:How I can update a Satellite C660 PSC0QE BIOS from linux

You cannot update the win based BIOS in Linux!
You have to use Windows in order to update Win-BIOS.

8 more replies
Relevance 67.24%

I bought Satellite c660-13r 11.05.2011

After Install, and setup Internet conection, ther was message on Bulletin Board, NEW BIOS so I update the laptop bios with TOSHIBA BULLETIN BOARD. I updated the bios to 1.30 with no problems,

NOW I HAVE BIG PROBLEM,
1. POST takes 30sec,
2. booting windows is slow
3. notebook is so slow i can cry!
4. when i open new window or just klick to open new link, everything stay for 3-4sec

and i must ask you, how is this posibile, when i open HWSetup, in start menu ->toshiba->utilytis
I can see BIOS.Version 1.40 04/08/2011 i can send you screenshots

How can i flasch BIOS with other versions,
Its big problem to work

Thank you and i hope you can help me..

Answer:Satellite C660-13r PSC0LE - BIOS update problem

Hi

The BIOS version should be mentioned in the BIOS settings.
Power up the unit, press F2 and check the version there.

Furthermore I recommend settings the BIOS back to default settings.
In BIOS settings you will need to press F9 to get default. Then save the changes and exit BIOS.
Reboot the unit and check how many processes are running in the OS background.

I recommend disabling some not essential processes in msconfig.
There you can go to StartUp tab and could uncheck not needed processes.

7 more replies
Relevance 67.24%

Hi All

Have Satellite C660 with keyboard lag issue tried to update Bios but after downloading Bios from Toshiba web site and running the intaller a message says the Bios already installed is a newer version and the install with now cancel.

Can anyone help?

Pilot

Answer:Satellite C660 - Keyboard lag and BIOS update will not install

Can you please tell us which C660 model do you have exactly (C660-xxx) and which BIOS version is installed?
Please check it in BIOS settings.

6 more replies
Relevance 67.24%

My sister asked me to update her laptop (Toshiba Satellite Pro C660-16N; Part number PSC0ME-01S00SEN) from Windows 7 Home Premium (64-bit) to Windows 8 (64-bit).
So I did.

Then I went to Toshiba's UK website to check if there were any drivers I needed to install for Windows 8. The only one was a BIOS update (to BIOS v1.70). I have no idea what the previous BIOS version number was.

So I run the update application within Windows 8. Phoenix Technologies WinPhlash starts and then halfway through the update, the whole thing freezes.

The trackpad wouldn't move the cursor or anything. I had no option but to unplug the laptop from the wall and remove the battery. The laptop is not under warranty.

Of course, now it won't turn on. It beeps once when I press the power button, but the system doesn't turn on. A couple of minutes later, it sounds one long beep then two short beeps. It then keeps repeating this "one long beep, two short beeps" sequence every couple of minutes.

I have Googled and read website after blog after forum post, but nothing works. The links to the software suggested on these websites/blogs/forums are usually dead, so I cannot try what they suggest.

The most common solution is the Phoenix Crisis Recovery Tool. I have managed to download v1.0.0.4 which is supposed to enable me to make a bootable USB key. The version of this tool that I have downloaded is meant to be for a Lenovo ThinkPad X200. I have the correct BIOS.rom for the Satelli... Read more

Answer:Satellite Pro C660 bricked by BIOS update that failed

Take a look into this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637

Maybe the last comment from user *gansell1980* could help you.
Otherwise you need help from Toshiba authorized service provider in case to reflash the BIOS ROM module.

5 more replies
Relevance 67.24%

First of all hi first post. I have 2 satellite laptops 1 C660 daughters crashed a while a go so she started using mine. Mine C665D now has broken screen can see some of screen. Decided to first try screen swap no go different connectors so swapped hardy rive from 665 to 660 and did clean install win7 pro. Was looking good but had no network driver. Not having another pc only iPads makes it a bit difficult to download driver so swapped Hardrive back download driver for 660 swapped again loaded driver all good working. Reading advice said to update all driver. Started at the top of Toshiba driver page and did bios update. Crash! During install of bios "confuser" shutdown and now will not boot. Push power button both led come on fan starts then just shuts off. Did a little research and it appears the bios flash was not a good option a pity it was on the driver download page, won't happen again. I have tried starting without battery f2 etc but still shuts down. Any help would be appreciated as I am defiantly out of my depth now. Both laptop currently in pieces but I am getting pretty good at the pull down put back together thing, tempted to bin then both but will see if you guys can help.

cheers Blowen

Answer:Updated BIOS - now black screen on Satellite C660

A bit of an update might help others?
It would appear I need to ref lash the bios. From what I have been reading process as follows.
1 make a bootable usb ( at this step now)
2 download bios. I downloaded wi rear to be able to extract the files. there are 4 files as follows.
1 bios.ROM 4,356 k.b
2 BiosCheck 1 k.b (this is a notepad read me file)
3 ec.ROM. 128 k.b
4 Setup 1389 k.b
Not exactly sure which file to copy over at a guess I would say 1 but maybe all needed?

3 remove hard drive and optical drive
4 remove battery insert bootable usb apparently it is imperative that you hold down the F key kept it in then plug ac power on continue to hold the F button let go after a while ( not sure how long 30 seconds I will try) let F button go. If you have a usb with a light if it comes on it is working, wait until it stop restart system and hopefully you can now get into the rest of the system.
I have got my old Acer laptop out of the Closet fresh installed win 7 was running really slow so spen most of day sorting, was services using 100% cpu, Windows update turned this of and now pretty good to hopefully make bootable usb and put on bios to flash Toshiba.
Fell free to add if I have missed something.
Thanks
4

1 more replies
Relevance 67.24%

One of my customers was caught by a telephone scammer and the result is the laptop now has a power on password.

On this model how do you reset the BIOS?

Jim

Answer:Satellite C660-2ED1 - Bios password reset

Hello Jim

BIOS password is very important security feature so BIOS removal technique cannot be theme for public discussion.
Such information cannot be shared on public forums. I hope you understand what I mean.

As far as I know Toshiba uses several different techniques how to remove BIOS password and I depends on notebook model.
If BIOS password must be removed it can be done by Toshiba service provider. Contact nearest Toshiba ASP in your country, explain the situation and they will help you with this problem.

1 more replies
Relevance 67.24%

Help me please ...

After launching the upgrade of the bios on the win7 pc has shut down due to overheating ...

Now the computer will not start, black screen but lights and fan switched on

I have followed many posts to create a usb pen to recover the BIOS but I could not find the right procedure and I do not know if where to find the correct bios for my notebook

Can you give me a hand with a step by step guide?
TNX

Answer:Satellite C660-1GD - BIOS upgrade failed for overeating

When BIOS update is interrupted for some reason there is very complicated situation.
BIOS is screwed up and you cannot start your machine anymore.

In such case you need professional help by authorized Toshiba service provider. They can help you with this.

All I can do for you is to offer this link where you can read about similar BIOS issue. I hope this link can help you.

Good luck.

3 more replies
Relevance 66.42%

There is no setting in the BIOS that i can find.

Bios is up to date

Answer:Changing shared memory in Bios for graphics - Satellite C660 217

Hi

This is not possible.

The shared memory is assigned automatically and this is controlled by graphic card driver.
But the shared memory is only in use if the applications (i.e game) would require more graphic RAM.

1 more replies
Relevance 66.42%

Hello, I have just upgraded to Windows 10 Home from Windows 7 and now HWSETUP.EXE does not run and when restart the laptop I cant get into the BIOS using F2 or F12. Can anyone helpmeet please? Kind Regards

Answer:Satellite C660-125 - Unable to access BIOS after Upgrading to Windows 10

You need to install the Toshiba System Driver for Windows 10.
However the C660 doesnt appear to be in the supported list, so you may need to go into the BIOS instead.

Hold SHIFT during shutdown to stop Windows from entering Hybrid Suspend Mode. Keep on holding SHIFT until the power LED turns off.
The F2 BIOS message only appears if the notebook does a cold boot.

1 more replies
Relevance 66.42%

Hello.
I enabled the Quick Boot Function which skips the Logos and only boots from HDD, but I can't enter or reset the Bios.

I tried every button combination I can think of.
F2+power on not work.
F1, F10, F12, del, ESC, INS - all not work

BIOS updated to 1.50-win.
Help, please.

Answer:Satellite C660-1TM - cannot enter BIOS due to Quick Boot Function

Hi

To access the BIOS you have to power up the unit firstly (press power button) and then press immediately the F2 button. You can press F2 several times in the row to ensure that the button has been activated.

By the way: The Toshiba HWSetup is preinstalled on most Toshiba notebooks.
This utility provides BIOS options and settings. So you can change the boot order in using this tool too. You can find it in Toshiba Assist ->Optimize tab

1 more replies
Relevance 66.42%

Dear all,


I have a strange problem with my keyboard for several weeks already. It performs strangely - lags all the time. In every program or Internet site (in the different Internet browsers) - characters (it doesn`t matter which one) would once appear and on the next time would simply not. Sometimes they just appear several times while I am typing. Sometimes simply nothing appears on the screen. Another test - pushing down one character for a long period of time would appear on the screen, but would stop for a fractions of the second and then would continue again visualizing on the screen. This is really annoying. You simply can not write. If I hold down a different character individully and slowly, I wouldn`t have any problems, but I can not write in this way.


That is why I decided to format my Windows OS today (XP PRO SP3) - no effect at all. No viruses. I tried from the WIndows services to turn them on and off one by one - no effect again.



After following these steps:

Workaround Procedure
1.Press then release the 'Fn' key
2.Press then release the 'N' key
3.Press then release the '1' key

... the problem just vanished and I was advised to set the new BIOS 1.70 for my computer. After downloading this package: http://support1.toshiba-tro.de/tedd-files2/0/bios-20120601172138.zip

and after following these steps: http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm (Steps 2) now I have a problem.

I did everything like written in the instructio... Read more

Answer:Keyboard lags on Satellite C660-11L (PSCONE) - BIOS v.1.70 Problem

If windows cannot stat try please to reinstall windows using Toshiba recovery disc.
After doing this you will have ?factory settings? and I hope everything will be OK again.

Test it please and post some feedback.

2 more replies
Relevance 65.6%

I have a laptop Toshiba Satellite C660-1ME (Part Number : PSC1SE-00G009AR).

I wanted to update the BIOS with the latest version 1.40. When you run the BIOS update gives this error "*project ID check fail*" what to do? how can I solve this problem?

And read all Thread about this problem but not change.

Answer:Satellite C660-1ME PSC1SE - project ID check fail while BIOS update 1.40

Hi

I recommend checking this thread about the same error message:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=64817
It seems that the new file has been uploaded and seems the issue has been solved in this case?

3 more replies
Relevance 65.6%

Good evening,
Five hours ago I did update the BIOS and restart the computer after I noticed that the cooler speed is increased and disturbing. Mention that they have purchased a Toshiba Satellite C660 last month.
Please, if you can help me how to set the correct rotation!

Thank you!

PS:Sorry for my english i am not from england!

Answer:Re: Satellite C660 - after BIOS update cooler speed is increased and disturbing

I think several people have posted about this issue here on this forum so it is a great pity that you didn?t check this forum before you have made decision to update BIOS. If you have a bit time check other postings in Satellite C category.

Anyway, what I can say is that you can try to reduce cooling fan speed using cooling method option in advanced power settings.

This should reduce cooling fan speed and your notebook will work much quieter. Set it simply to ?battery mode? option.

2 more replies
Relevance 65.6%

I've been experiencing keyboard lag on my C660-184 (PSCOQE) since I got it, and it seems to have recently gotten worse.
I've tried to do the recommended BIOS update (bios-20110530152148) to fix it, but the update cashes, with this error message:


Problem Event Name: APPCRASH
Application Name: winflash.exe
Application Version: 1.1.26.0
Application Timestamp: 4b0b90c3
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.17514
Fault Module Timestamp: 4ce7ba58
Exception Code: c0000029
Exception Offset: 000907b6
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057
Additional Information 1:e8ad
Additional Information 2:e8adce1c2b9e7be834b4063ac3c53863
Additional Information 3:e8ad
Additional Information 4:e8adce1c2b9e7be834b4063ac3c53863

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Any ideas? Thanks!

Answer:Satellite C660-184 BIOS update fails: winflash.exe stops working

Hi

BIOS update requires the VAP (value added package) and all security tools should be turned off.
Here is detailed instruction how to update the BIOS:
http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=60

You can also check if new OS installation would fix this because this issue could be related to muddled operating system? you know? but firstly try to reinstall the VAP and be sure that you use the right BIOS.

6 more replies
Relevance 65.6%

HI,

I have a problem with updating the BIOS on Toshiba Satellite c600-28j.
Error: Project ID check fail

Model: C660-28J
Part NO: PSC1NE-01200XRU
Serial: XB063018K
BIOS Version: 1.10
OS: Windows 7 Pro SP1 32-bit

What can you recommend?

Thanks.

Answer:BIOS update issue on Satellite C660-28J - Project ID check fail

Check this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=64817

The BIOS from Toshiba Australian page should work

1 more replies
Relevance 65.6%

I have a laptop Toshiba Satellite C660-1ME (Part Number : PSC1SE-00G009AR). I wanted to update the BIOS with the latest version 1.40. When you run the BIOS update gives this error *"project ID check fail"* what to do? how can I solve this problem?

Answer:Satellite C660-1ME PSC1SE - project ID check fail while BIOS update 1.40

Hi

Usually the VAP (value added package) needs to be installed in order to update the BIOS.
Is VAP installed? If yes, try to update or reinstall this package again and check if BIOS update is possible.
Furthermore disable any security software like firewall or antivirus software which could prevent the BIOS update.

3 more replies
Relevance 65.6%

Update to 1.4 stops on : Project ID check failure. I have Satellite C660, BIOS version 1.0.

Thahx for help.

Answer:Satellite C660 - BIOS update stops on : Project ID check failure

Can you post more info please?

Which notebook model do you have exactly (C6660-xxx)?
DO you use original preinstalled operating system that you got with your notebook?

16 more replies
Relevance 62.73%

Hi,

Can someone please help,

I recently bought a Toshiba Satellite C660/C660D for my nephew, We have forgotten the administrator password and we don't have password reset disk is there anyway around this.

Thanks

Answer:I forgot my administrator password on Satellite C660/C660

Hi

I assume you are talking about windows system password and not about BIOS password. Right?
It?s not very big problem if you forgotten the System password but if you mean BIOS password then you are in trouble because the BIOS password can be deleted just by an Toshiba ASP technicians?

So I assume you mean Windows password? so start the notebook and press F8
Now you can choose Repair my Computer and then choose HDD recovery.
This would start a HDD recovery procedure which would reinstall the system? during the setup you can set anther admin password.

Of course there are some other methods but as far as I know this requires 3rd party software/tools or Win 7 DVD? so I think the HDD recovery is the fastest solution.

8 more replies
Relevance 61.09%

Hello,

I have a Satellite L870-141 (PSKBLE). I have updated my BIOS recently to the latest version. (1.60).
Installation was succesfully completed and everything worked fine. After a week or so, the alt key got kind of stuck.
Rebooting the system did not help. Restoring to an earlier backup did not help.
After trying several things, I discovered a way to unlock the tab key. When the sticky keys function is enabled, I have to press the FN key first and than the F5 key. But when I reboot the system, the alt key is stuck again.
It is not a physical stuck alt key, because when I have 'unlocked' it, I can use all the keys again, including the alt keys.

When I access the bios by pressing F2, the bios opens, but I can not use a single key! I have to use the power button to exit the bios. Therefore, I think the bios is corrupt.

Does anyone have a solution for this problem?
Or does anybody know how to downgrade the bios system? (I can not find an official earlier version of the bios)

Note: When I use the HWsetup program and activate the standard F1-F12 function, I can not 'unlock' the tab key anymore.

Answer:Corrupt BIOS on Satellite L870-141

Problem is that Toshiba offers latest BIOS versions only so on Toshiba download page you will not be able to find earlier BIOS version.
What you can try is to contact nearest Toshiba service provider and ask for help. They have access to BIOS database and can obtain older version for you.

I really don?t know what is wrong there but you can try to use older BIOS version in hope everything will be OK.
Have you checked this forum to see if anyone else has reported about the same issue?

4 more replies
Relevance 59.86%

Hi,
i used to do a Bios Update on my old C660D-1EX,
after the Bios flashtool finished "your pc will restart now" there is only a black screen
no post no beep nothing i tried everything like mainboard batterie out cmos reset etc.
nothing worked.
So Bios seems corrupt without any reason and now i need to recover it but i cant find
a tool for this like other manufaktures have it for there customers to download.

Can anyone help me to create a usb stick with the correct bios to recover my laptop?

S/N: zb100839k

More replies
Relevance 59.86%

Dear all,

I have tried to download the newest BIOS update for the R830 model, but I end up with a corrupt zip file every time:

http://support1.toshiba-tro.de/tedd-files2/0/bios-20110908125815.zip

Anybody else has this problem?
Anyone who would be able to send me a working file by mail (throwaway (@) angelwithagun.com)?

Thank you very much!

Bye,
a.

Answer:BIOS update file corrupt Satellite R830

Hi

I could download and was able to unzip this BIOS package properly.

No error messages by now!

2 more replies
Relevance 59.45%

I tried to upgrade my bios...now says:
'windows could not start because the following file is missing or corrupt : \windows\inf\biosinfo.inf'

It's a satelite 1900-303 ...don't know what to do now.
If anyone can help it would be very much appreciated.

Answer:Satellite 1900-303: biosinfo.inf failed or corrupt after BIOS update

Hi,

maybe the BIOS was not installed correctly or something like that.
Anyway I think you should reinstall the BIOS.

Bye

9 more replies
Relevance 58.63%

Hello everybody.

I have been having some issues with my Toshiba Satellite C855D-135 laptop. I had to change my internal hard drive, so I decided to install windows 7 on it (I used to have windows 8 but don't have the CD and I couldn't find the licence key sticker.),
So I went into the BIOS to switch it from UEFI to CSM, but something went wrong at that point and it seems to have corrupted the bios.
I think I have bricked it, but some things still work.

When I turn it on:
- the screen stays black (Yes, I have tried it on a different screen)
- the keyboard doesn't seem to be working (the leds don't turn on when I press caps lock)
- the fan works fine
- cd reader works fine
- When I plug in a USB stick, it flashes quickly once, so that seems to be working
- When I removed the memory bar, the computer did it's series of beeps

- I tried removing the battery, unplugging it and pressing on the power button for ages. (no luck)
- I have tried removing the CMOS battery to revert the bios to default. (no luck)
- I tried flashing the bios on a USB stick, until I realised the keyboard wasn't working and that it was all in vain.
- I tried putting the bios update on a CD, and it spun for a while, but nothing happened in the end. I tried putting these files on the CD:
- IBIOS.BAT
- C8610.FD (in the Win8 folder)
- C610.FD (in the WIN7 folder... Read more

Answer:Satellite C855D-135 - Corrupt BIOS, black screen, keyboard is not working

Ok, so this weekend I tried replacing the memory, but that didn't seem to make any difference.

I tried flashing the BIOS from a CD again, coz it appears to try and read CDs when you insert them.
I tried renaming C8610.FD to C8610.bin and BIOS.bin, but nothing happened.
I also tried all of the different combinations above, one by one. (Yes, I am a very patient girl! lol)

I was wondering, is there a special way to put things on a CD for it to be bootable?

2 more replies
Relevance 58.22%

Hello all,

I'd like to report about successfull recovery of corrupted bios on my Satellite A200-1CG (PSAE3E).
As many others i've downloaded a latest bios update for my notebook and started it under Windows 7 64 bit.

Actually i've only neded some informations from the bios update tool, but the update has started automatically
without a question. :( After serveral blocks has been updated the progress bar has stucked at one position.
In 2 minutes i've had only the completely freezed system. I've switched off the system manually, switched it on again, and...
my notebook was completely dead: black screen etc. and of course i was not able to boot into the Windows 7.

So for those, who is only planning to update the bios: DO NOT UPDATE BIOS ON SATELLITE UNDER WINDOWS! THE UPDATE MAY STUCK!

I've searched over the web a found a solution. With a specially created floppy disk and external usb floppy drive the problem can be eventually solved

I've tried the recovery procedure described there but it did not help. The earlier versions of phlash16.exe tool
where not able to restore the bios. I've heard that the floppy disk was constantly readed for about 2 minutes. After the recommended 5 min pause, I've switched the power of and then switched it on again and ... I've had the same blackness of the screen as before :(

The strange thing was that the latest version of the phlash16.exe tool also didn't work, but it was different to earlier version. If I've used the earli... Read more

Answer:Satellite A200-1CG PSAE3E: Corrupt BIOS - solved with crisis recovery disk

Thanks for the info buddy?
But to be honest the BIOS procedure is always a sensible matter and I would be always careful using such things.

Anyway? great to know that your unit is running again!

2 more replies
Relevance 56.58%

When I cannot boot up at all? My laptop froze the other night then since then will not boot up at all. It goes to the toshiba start up screen, then a black screen for a while with a white enlarged mouse cursor. after that it goes to a windows 7 screen but nothing loads up etc. Toshiba said my windows 7 is corrupted. They said I should have set up some disks when I first set up the laptop but I cannot recall anything like that ever popping up. They said I can buy the disk off them for ?30 think its called a toshiba media disc? Or they said I could buy windows 7 from a shop for like ?70. Thing is windows 7 was preloaded on already but there is a serial key for windows 7 home premium underneath the laptop. Am I able to enter that serial key somewhere and download windows on to a blank disk? My nana gave me a windows 7 64 bit system repair disk. Will this work? How do I reinstall windows if it won't boot up? I seriously appreciate ALL answers. Im not very good with this sort of thing, sorry if I sound annoying.

Answer:Toshiba C660-2E1 Windows 7 Corrupt, How do i reinstall?

You can download a legal copy with SP1 integrated from here: Official Windows 7 SP1 ISO from Digital River.
Make sure you get the same version you have, Home Premium, Pro or Ultimate and 32 or 64 bit. Note that Basic or Starter is not available.

I recommend using ImgBurn at 4X speed (or the slowest available) to create the DVD from the downloaded .iso file.

You can do this on any computer capable of burning a DVD.

For techies or folks who work on computers: Create Windows 7 Universal ISO With All Editions Selection On Install with ei.cfg Removal Utility.
This will fit on a 6GB flash drive or can be burned to a DVD.

2 more replies
Relevance 51.25%

I dunno know what's going on but I can only use FN + 3/4. It's crazy, 'cause I've got this computer only few weeks...

Answer:Satellite C660 cannot use all the FN key

also interested in this problem
updated windows and fn panel ceased to appear
only works fn +3 fn +4
do not tell that to establish a panel to fn resonant work?

2 more replies
Relevance 51.25%
Question: Satellite C660-23M

My laptop wanted to do 3 updates last night when I shut it down - don't know what updates - but after bout 30mins of doing nothing I turned the power off. It's now npt doing anything!! Power is on & initially got a Boot Menu box with info on but now the HDD/SSD info that was showing has disappeared. I'm a real non tech person so haven't a clue what's happened or how to sort it. Wasn't having any problems at all until the laptop tried to update last night. Can anyone help??

More replies
Relevance 51.25%

Hi!

My model is Satellite C660-1LD .
I want to add 4 GB RAM to my laptop.

There is now 4GB RAM DDR3 *(1066MHZ)* on my laptop.
Can I add, or is it better to add 4GB RAM DDR3 to the second slot with *(1333MHZ)*?

And what frequency my computer will work? (1066mhz or 1333mhz).
What better RAM to add( brand, frequency) you think?

Also the RAM I found is Unbuffered, what it means?

Thank you!

Answer:Satellite C660-1LD - I want to add 4 GB RAM

> Can I add, or is it better to add 4GB RAM DDR3 to the second slot with *(1333MHZ)*?
This depends on your chipset.
If your chipset supports 1333Mhz then the RAM will work with full performance, otherwise it would be clocked down to 1066Mhz.

1 more replies
Relevance 51.25%

Hi

I was wondering what CPU's the C660/01m can take. It's an i3 but can it take i5 or i7?
Is there a list of all its technical info?

Thanx

Brian

Answer:Satellite C660/01m What CPU can I use?

Have a look at the other C660 models, if they have an i5 then your model should be able to take the same CPU.

2 more replies
Relevance 51.25%

I have the very annoying problem of key lag on my laptop which is a satellite C660 1-f-1 .

I've had the laptop for around 3 months and have tried the keyboard settings on all settings to no avail. I paid ?350 for this laptop and I'm getting increasingly aggravated !

I've read that the problem has cropped up with other models and that removing and then replacing the battery helps.. but I can't keep doing that mid conversation or e-mail !

I keep reading about these update download bios but have no idea what that means . Could somebody please explain in a plain English non-tech speak style please ?? !!

Answer:Key lag on Satellite C660-1F1

Hi Helenuk1963

A BIOS update is something that makes the main brain of the laptop smarter but this does not 100% mean it will fix it the normal fix is to run a recovery of the unit via the HDD by pressing F8 non stop on startup and selecting repair your computer then login and select Toshiba HDD recovery but before you do this make sure you have backed up all your data and created recovery disks via the toshiba recovery media creator in the start menu.

if you do want to run a BIOS update best thing to do is call Toshiba direct who can walk you though it and at least if something goes wrong it will be covered.

2 more replies
Relevance 51.25%
Question: Satellite C660

My brother has a Satellite C660-1H6 laptop. Unfortunately his HDD went bad.
I installed a new HDD and reinstalled Windows 7 Home Premium, which was originally installed on the laptop.
Setup accepted his product key and installation went relatively smooth, only problem is that after installing the drivers, I cannot connect to wireless network.
Laptop uses an Atheros wireless card, model AR9285.
Things I tried, following forum suggestions:
-Allocate a MAC address instead of "Not present" to the wireless adapter.
-Changing various drivers, including the one from Toshiba page and some from the Atheros page.
-I installed ALL the drivers, I don't have any unknown device or exclamation mark in device manager
-Installed ConfigFree, Flash cards support utility, Value Added Package, Wireless LAN indicator (some users select that some of these are needed)
-I ran Windows troubleshooter
-I did a factory default reset in BIOS
-Although I did not change the antennas before, I also tested the wireless with the 2 antenna connectors replaced the other way on the wireless card.

Fn+F8 works, I can enable/disable the wireless. I can see a list of available networks, including mine. When is try to connect, it asks for password. My router is using WPA2-PSK authentication and AES encryption. I type the password, it tries to connect, but I get the following error message:
"Windows was unable to connect to XXX" (I replaced the SSID of my network with XXX)
After that... Read more

More replies
Relevance 51.25%

Hi all,

I crashed my MBR against a standard MBR.
Do you have a C660 MBR so that I found the recovery?

Thank you in advance :)

Answer:Satellite C660 - I'm looking for an MBR

> Do you have a C660 MBR so that I found the recovery?
If I understand you right you cannot start HDD recovery installation, right?

Have you created recovery DVD?

4 more replies
Relevance 51.25%

Hello all,

Yesterday all of a sudden, the laptop screen went blank. Upon turning it on several times, the screen still doesn't turn on. By connecting the monitor to a external monitor via VGA (my TV), the TV does show up the screen, but has several flickering horizontal lines showing, thus obscuring part of the screen (http://i.imgur.com/83RO8xg.jpg - ignore the windows behind, I was testing the sound - and it works).

I have tried several solutions on the web (like removing the battery and AC cable and pressing the power button, and interchanging the RAM card in the slots), and not surprisingly, nothing worked as I think my problem is not similar. Windows 10 just boots to a blue screen with a sad face and a QR code (I don't even know...), while Linux Mint does boot and gives a message of "running without hardware acceleration". I couldn't get any diagnosis on Linux to check if it's a problem on the graphic card or the motherboard, so I am turning to these forums to check if anyone had any similar problem.

Thank you.

More replies
Relevance 51.25%

Hello
I am new with this forum, hope i will welcome here

I want value added package for working FN button properly with software

My OS is windows 7 32 bit
Toshiba C660-A041
Part Number : PSC1NV-026019AR

Thanks for help me

dB :)

Answer:Need VAP for Satellite C660

I?ve checked Toshiba support page for available drivers and your notebook model is not supported for Win7 32bit.

Try please to install available VAP for some older supported model.

1 more replies
Relevance 50.43%

I find alot of batteries online, but my main concern is that. My laptop is Satellite C660-1M0 (ps1ge-02901fgs).

I find batteries that claim is for c660 but they reffer as (PA3634U-1BAS),some reffer as c660d and some reffer as c660 (PA3634U-1BRS). I am a bit comfused, is any compatible??

Thank you

Answer:What battery do i need to buy for Satellite C660?

When you remove original battery you can see which part number it has. In my opinion best thing is to order the same battery model. Using this part number you can try to find some online store where you can order it.

On the market you can find many batteries offered by some third part manufacturer (without Toshiba label on it). Such batteries are cheaper that original batteries by Toshiba. They could be good but usually they are dead pretty fast.
Last year I ordered such battery for my old A300. Battery was OK but I could not get it in place properly. The battery was in place but at the back side there was some kind of pressure and the plastic was out of shape. Anyway, it is your decision what to do.


Compatible batteries for your Satellite notebook have follow part numbers:
PA3757U-1BRS
PA3787U-1BRS
PA3817U-1BRS
PA3818U-1BRS
PA3820U-1BRS

Good luck

1 more replies
Relevance 50.43%

Hi guys ive had my laptop a few years now and it used to be fast and reliable a great laptop and all of a sudden it's just gone really slow it almost says not responding on anything I click and isn't the same as it used to be I've tried reinstalling windows but it does nothing it's like it's not responding sometimes and is very laggy any advice is welcomed

More replies
Relevance 50.43%

Hi friends

I have Satellite C660 its built-in mic and external mic not working
Can any one help me?

Answer:Satellite C660 - mic is not working

We don't have enough info to understand your problem.
Which operating system do you use?
Is sound driver installed on your machine?

When you open control panel > sound > recording, is any recording device listed there?

5 more replies
Relevance 50.43%

Hi

As my username suggests, I'm not very good with these things. I bought the c660 about a month ago and I cannot believe how slow it is, it takes forever to open a document and the internet takes absolutely ages to open even the home page.

I have tried disabling add ons and I have only stored one excel sheet and about 20 pics on the computer its self so I can't understand why it is like this, to be honest it was like this from day one!

Please can someone tell me what I can do to rectify the problem?
Many thanks :)

Answer:Re: Satellite C660 new but very slow

Hello

In this forum you can find many identical threads. Please check http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=63322
If you have more questions let me know.

2 more replies
Relevance 50.43%

Hi lads, I just want to ask some experienced peep. What is maximum ram I can fit in my Satellite c660? As much I google around its says 8gb (1066 MHz). But I`m looking on DDR3 16gb 1600MHz. What do we think?
http://www.amazon.co.uk/Corsair-CMXS16GX3M2A1600C10-Vengeance-Performance-So-Dimm/dp/B0076W9Q5A/ref=sr_1_26?s=computers&ie=UTF8&qid=1350659763&sr= 1-26
or play it safe and pick up
http://www.amazon.co.uk/gp/product/B006EWUOL8/ref=ox_sc_act_title_1?ie=UTF8&smid=A3P5ROKL5A1OLE

Message was edited by: kri.ws


Another question : What is So-Dimm?

Message was edited by: kri.ws

Answer:RAM upgrade for Satellite C660

> What is maximum ram I can fit in my Satellite c660?
Can you please post exact model number (C660-xxx)?

6 more replies
Relevance 50.43%

Hello,
I am going to download this new Windows 8 Preview..
Will it accept the drivers for my laptop??
My laptop is TOSHIBA

*MODEL NAME*: SATELLITE C660 - 1M0
*PART NO.* PSC1GE - 029002AR
*SERIAL NO.* 6B206893K

Answer:Windows 8 on Satellite C660-1M0

Untl now I didn?t make some experiments with Win8 but I think there should not be problem if you use Win7 drivers.

Create recovery DVD and make test with Win8. If you don?t like it or you will see that there are problems with drivers, tools or utilities installation you can install recovery image again using created recovery DVD.

I think you are the first one with Win8 and it will be nice if you can make short report about all this. It will be interesting to read your experience about it.

16 more replies
Relevance 50.43%

Hello,

My Toshiba Satellite C660-1C7 needs its motherboard replacing.
Does anyone know where I can find a motherboard for the exact model (cheaper but used one) on internet?
I searched it on ebay but there is nothing on :(

I appreciate your support!!
Regards

Answer:Need motherboard for my Satellite C660-1C7

Hi

In the past I have bought two used motherboards on the eBay. Other way you must use Google search and try to find some online store where you can order such repaired or used motherboards.

2 more replies
Relevance 50.43%

Hi,
I need install Solidworks 2011 on my Satellite C660-226, the installation seem normal but i cannot run the software. The first windows is opened and after nothing !!!!

Similar problem with CatalystEX, normal installation ( ?) but the software stop with error's message." Memory can be defective"
I use Windows 7 pro.

Help !!!!!!

Answer:Cannot run Solidworks on Satellite C660-226

Hi

I think this 3D software needs some graphic memory.

The INTEL HM55 graphic card should be ok for such purposes and the 3D Graphic Accelerator is supported too.

I think you should update the graphic card driver? maybe you can use the latest one from the Intel page.

2 more replies
Relevance 50.43%

I have a Toshiba Satellite C660-1NP and i want to upgrade the ram on it is.
The right ram to get or do i have to get diffrent ram

Please answer my question

toshiba user

Answer:RAM upgrade on Satellite C660-1NP

Hi

According notebook specification this notebook can be upgraded up to 8GB. It is delivered with one single 4GB module inside so you can obtain one 4GB and put it in empty slot.

Compatible 4GB RAM has part number PA3918U-1M4G. Using this part number you can find right and compatible RAM module for memory upgrade.

2 more replies
Relevance 50.43%

My laptop specs :
Processor type : Intel? Pentium? Processor T4500
clock speed : 2.30 GHz
Front Side Bus : 800 MHz
2nd level cache : 1 MB
Operating system
No Operating System pre-installed

Design Color color : Black finish with textured pattern and black keyboard
System memory standard : 2,048 MB
maximum expandability : 4,096 MB
technology : DDR3 RAM (800 MHz)

//////////////////////////////////////////////////////////////////////////////////////////////////////////////

I'm confused , can't find any DDR3 800hz anywhere ... and I'm using a 64bit windows 7 .. i recognize other C660 series laptops can upgrade to 8gb but only with 64bit systems ..

is the ram bus only limited by the processor bus ?
is it possible that i can add up to 8 GB and info on the site not fully explained since this laptop doesn't come with any OS ..

last . since i can't find 800hz ddr3 memories ... does it matters if i added different bus memories but both run on a lower bus ??

I'm waiting for your kind reply thanks .

Answer:Upgrading RAM on my Satellite C660-15G

have a look on http://uk.computers.toshiba-europe.com/innovation/generic/SUPPORT_PORTAL/
enter your serial and under optional extras it should tell you on there if not a uk model have a look on your countrys website

4 more replies
Relevance 50.43%

HELP GUYS!!
i have tried everything that i am able to think but no sound come out of my laptop.
i installed drivers from toshiba site.
i tried some other drivers but nothing!!
please help me!!

Answer:No audio on Satellite C660-1CC

Hi Jim

When you try to get some help here please be so nice and offer more info about your machine. Please tell us which OS do you use.
Tell us something about preinstalled OS. Is it original OS version that you got with your machine or your own installation.
Since when you have noticed this audio issue?
Have you checked sound card status in device manager? Is sound card enabled properly?
Have you tried to test functionality using headphones or headset?

You know it is not easy to say much without some basic information.

2 more replies
Relevance 50.43%

hello i have a toshiba satellite c660-2q8 laptop,

when i got it it only had 1g of Ram i now have got 8g of RAM for it but as soon as i fit it the laptop starts like normal with the BIOS screen then i get a black screen with a flashing - and thats it.

After some time it will restart and do it again.
I have contacted the place i got the RAM it.
The RAM is right and there said it was the BIOS that needs updating but it is version 1.50 and will not update cos it is up to date if i put the old RAM back it boots fine

can some one please help

Answer:Satellite C660-2Q8 does not start with 8GB RAM

It?s NOT BIOS issue but the RAM modules are NOT compatible.
Even if the guys says that the RAM module are right, obviously they are NOT?


The 4GB Genuine Toshiba PC3 DDR3 (1333MHz) Memory Module PA3918U-1M4G should be OK and should work properly.
Also the Kingston modules are great and provide good quality.

Cheaper modules might not be fully compatible or would not work properly.

1 more replies