Computer Support Forum

New keyboard on Satellite L500-19X doesn't work properly

Question: New keyboard on Satellite L500-19X doesn't work properly

Hello,

About a month ago I spilt pepsi on my laptop and had it sent for repair. I got it back today and it had a new keyboard installed, among other things. But, the new keyboard is not functioning correctly.

A bunch of the keys type nearby letters instead. E.g typing "a" gives "aq1", "b" gives "bgt". It seems to type the letters vertically above. Some work fine.

Is the new keyboard faulty, or does it need calibrated or something? My laptop model is L500-19X.
Thanks.

Relevance 100%
Preferred Solution: New keyboard on Satellite L500-19X doesn't work properly

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: New keyboard on Satellite L500-19X doesn't work properly

My advice: don?t waste your time on forum expecting some help. How to give you proper answer to your questions?
I have only one answer to your question: no, keyboard doesn?t need to be calibrated.
Contact service provider as soon as possible and ask for help.

2 more replies
Relevance 78.59%

Hello,

I bought a L500 six months ago and now it's almost useless. Trying to operate it by starting it normaly is impossible, taking more than 40 minutes just to start up. Getting any program running or any window open takes many minutes more, if at all.

I have tried restoring the computer to a previous date but it only goes back to two weeks ago and is still facing the same problems. I have checked for bad sectors and not found any. I have also tried doing a CHKDSK but it eventually freezes after a couple of hours during stage 4 of 5, in the following file:
Users\DANIEL~1\AppData\Local\MICROS~1\Windows\TEMP OR~1\Content.IE5\FIA7RO0V\combo[1]

I can operate the computer in Safe Mode most of the times, but when moving information it tends to freeze or slow down a lot. I have been backing up my information and many times it freezes during the process.

I have been using Microsoft Security Essentials but it has been deactivated. I can?t get it back on, although I have been constantly using USBs changing information between computers and no virus have been detected in the my other computer.

I do remember that one of the things that first started working strangely were WMP and VLC, as movies saved on the disk and some music albums would start freezing up after 5 minutes of being played, then playing again for a while and freezing later again.

What do you think the problem is? Is it likewise this will be a problem covered by the warranty?

Please let me know w... Read more

Answer:Satellite L500 doesn't work properly even on Safe Mode

Hi buddy,

> Is it likewise this will be a problem covered by the warranty?
It?s only covered by warranty if it?s a hardware malfunction but if it?s just a software or driver issue it?s no warranty and you have to pay for service.

Anyway, it?s hard to say what the problem is but theoretically it could be software related only and even in safe mode you have several issues I would try reinstall Windows from Toshiba recovery disk. This can restore the original factory settings (out of box settings) and with these settings everything should work properly. Then you can make sure it?s no software or driver problem because the recovery image is pretested by Toshiba.

If you still have problems after recovery installation contact an ASP!

3 more replies
Relevance 76.27%

Hi,

I have Vista L500 with a dead keyboard. This machine has not been dropped or had anything spilled on it. I have plugged in external USB keyboard which works. The laptop keyboard does not. I have flashed BIOS, updated drivers, held shift key for 10 sec (read on another forum), reset computer, checked Windows Vista updates and ran 3 Virus checks.
Everything is perfect, just no Keyboard?

What else should I check? Could it be a motherboard problem?

Thanks for any help given :)

Answer:Satellite L500 - Keyboard doesn't work

Hello

Can you enter the BIOS (F2 key) with internal keyboard?
If not the internal keyboard seems to be defective and needs replacing?

I don?t think you can do more. I mean you tried everything what is possible and if an external keyboard works the OS installation should be ok.

The keyboard can be ordered and replaced from an authorized service provider. Do you know how to contact the guys?

3 more replies
Relevance 76.27%

Hi I HAVE L500-1XL AND MY KEYBOARD DOESNT WORK THE KEYBOARD BACKSPACE AND TYPING I GET A ROW OF TTTTTTTTTTTTTTTTTTTTTT LIKE THIS IVE CLEANED IT AND STILL DON'T WORK

Answer:Satellite L500-1XL - keyboard doesn't work

Hi

Get in contact with your Toshiba ASP in your country and ask for the keyboard replacement.

Greets

2 more replies
Relevance 100.45%

I know, it is a very old Notebook, but i have a big problem, maybe someone of you can help me. I have bought the notebook only for wrighting reports. But the main problem is, when i try to write for example following sentence:

i have learn much about ....

the Notebook makes following:

i haive leairn muwech aibouwet

(In Word or the text program of Windows)

It is Windows 95 installed, i have tried to take an other keyboard driver, it only helpes for a while, after the next booting, the same problem is existing :(
Now it is so far,that the change of the driver has no more effect.

To Format the Windows 95 is not possible, cause the notebook makes "formait" :( And Linux is not Solution for me...

What can be the problem? What can i do? Has somebody else a driver or anything else what i can install to solve the problem?

In hope to find a Solution
Nadine

Answer:Keyboard doesn't work properly on my old Satellite Pro 420

Hi Nadine,

From what you have descibed, it seems as if the problem is with the keyboard itself and not with the drivers themsleves. Is it possible that there is something trapped under some of the keys, maybe a small fragment of something, especially under the "e" and "w" keys? Maybe also some liquid has been spilled on the keyboard causing the laptop to believe that sometimes these keys are pressed when they are not.

I would try cleaning under all of the keys, you may need to remove the keyboard to do this. Remove the power adapter and battery before any cleaning to prevent damage to the laptop. You should be able to find instructions for removing the keyboard in the owners manual.

Good luck and let us know how you get on!

Weezle

2 more replies
Relevance 100.45%

Hello everybody!

I got a Problem with my keyboard. If I write any text under Windows, some letters are missing, most notably if the same two letters come one after the other (really annoying if entering a password...). I have to press the keys really hard to avoid missing letters.

Under linux I do not have these problems writing texts so I assume that the Windows keyboard driver is some kind of sh...! I deinstalled the driver already and also replaced the touchpad driver with one for my Logitech mouse, but this all did not really help me...

Any suggestions?

Thanks in advance,
Alexander Roos

Answer:Keyboard doesn’t work properly on my Satellite L10-100

Hi Alexander,

Please check in your 'accessibility' options whether you have any of the items selected for use relating to your keyboard.

One of the options is designed to prevent duplicate or mutiple key depressions from registering (to help people with muscle spasm problems from constantly hitting the same key inadvertantly).

I can't think of any software problem which would cause you to have to press the keys harder than normal in order to register. Each key is a simple on/off switch so the amount of pressure is irrelevant.


HTH

5 more replies
Relevance 99.22%

Hi
I bought Toshiba P100-465 last month and found out that if you press its any key (specially spacebar or enter)from the top-right corner, it doesnt work.
I never saw such problem anywhere in any laptops. Please confirm me if this is the case with all or should I get my keyboard replaced.

Answer:Keyboard doesn't work properly on Satellite P100-465

If some buttons don?t work mostly the whole keyboard must be replaced!
The P100-465 seems to be a new notebook and the warranty should be definitely valid.
Why you waste the time and don?t contact the authorized service provider in your country for a keyboard replacement??
Everything should be done for free!

2 more replies
Relevance 99.22%

Hi,

I've bought a Toshiba L670-1dg for christmas, in France.
I have used it only 1 day, and the keyboard is already getting me mad.

When I type, some letters are missing, and sometimes they appear twice.
It is almost impossible to type a complete sentence without a missing space
or a doubled "e".

Is there any setting in windows to correct this problem ?

Regards

Simon

Answer:Satellite L670-1DG - keyboard doesn't work properly

Hi Simon

Unfortunately there is no such setting.
Please check this forum and you will find several threads about this theme. Maybe you will find some good advice there.

1 more replies
Relevance 99.22%

I have relatively new Toshiba Satellite C655 and after spilling a (tiny) amount of soft drink on the upper left keyboard, the keyboard quit working completely.

After installing a new keyboard, most keys work except for the P, R, V, T, [, and Space keys. External USB keyboards work flawlessly. I bought another new keyboard and carefully replaced it, but the problem persists. After this, I tried updating the BIOS to no effect.

Is anyone familiar with this, and know how to fix the problem?

Answer:Satellite C655 - new keyboard doesn't work properly

Hi

I guess this issue did not appear in the past before the soft drink has been spilled on the keyboard. Right?

This means that this fluid is the reason for the keyboard problem.
I guess, both new keyboards are OK.

In such case the problem can be the motherboard or you used both keyboards which are not fully compatible. But I guess this isn?t really a problem.

Possibly you motherboard is affected?. :( but this is just an suggestion

2 more replies
Relevance 97.99%

Hi professionals and Toshiba fans,

I have a problem with CTRL button. Pressing of this button results in activation of the function CAPS Lock and the functions CTRL-C, CTRL-V, CTRL-F etc. can not be processed respectively. It happened after my son's playing some computer games. I will really appreciate any advice.

Thank in advance
Ksenia

Answer:Satellite Pro M30: CTRL button on keyboard doesn’t work properly

Hi

Try to connect an external keyboard. If the problem stills the same, so it is not the hardware malfunction.

Bye

3 more replies
Relevance 95.94%

Hi

I have installed the tool from MS MSKLC 1.4. on Toshiba Satellite L300, and Vista32. This tool is for generating an own Keyboard Layout.

I wanted to implement Gujarati Signs for a friend. For this, we put signs/letters on three "levels" in this keyboard layout:

1. Standart like "a,b"
2. Shift like "A,B"
3. Altgr + key

The first two levels with letters are running fine, but the last one not.

We tested it in Open Office 3.1 and MS Works Words. Both programms do not accept Altgr + letter-key.
Open Office has no special functions for altgr+keys.

In an editor, which comes along with MSKLC 1.4., also the 3rd level works fine. NO problems here!

How can this happend? What do I have to do?

Jens

MSKLC 1.4. is available:
http://www.microsoft.com/downloads/details.aspx?FamilyID=8be579aa-780d-4253-9e0a-e17e51db2223&displayLang=en#Overview

Answer:Satellite L300 - Keyboard layout creator MSKLC1.4 doesn't work properly

Hi

What do I do, to enable all 3 states to work on the UK-Toshiba and on all editors?

The Toshiba Laptop Satellite L300, inclusive of Vista32 Home Premium were bought in the UK!

The MS MSKLC 1.4. Keyboard Layout Creator was installed to create a Gujarati (Indic) Keyboard.
This was downloaded from the official MS pages. (US?)

I implemented the Gujarati Letters on three "shift states" of the keyboard layout.

standard
shift
altgr (alt+ctrl)

The first two states work well on the UK-Toshiba laptop.

The 3rd state (alt+ctrl) does not display Gujarati Letters, - it displays Latin Letters instead.

An external keyboard behaved in the same way, as described above.


On a German-Toshiba A50 laptop with XP,

ALL THREE states display Gujarati letters.

An external keyboard ALSO displays Gujarati letters in ALL THREE states.


On the UK-Toshiba, the inbuilt MSKLC Editor displays Gujarati letters in ALL THREE states.

On other editors, the first two states work, the third (alt+ctrl) does not work.


Please, what do I do, to enable all 3 states to work on the UK-Toshiba and on all editors?

With kind regards,
Jens

7 more replies
Relevance 95.94%

Hi - two months ago purchased new Satellite L500 - all well and then last week started having problems with charging.

As usual, I allowed the battery to run down to about 10% capacity before plugging in the AC power. Whilst working away noticed that the charging would stop for about 2 seconds, and then reconnect. After a few minutes, it would do it again.
It is charging the battery, but it is now flicking on and off quite frequently - 5 to 10 times per minute. Apart from being off-putting as the screen dims, I am sure that this can only become steadily worse.

I have tried another adaptor - my son also has a Satellite, and the problem is still there, so it is not a fault with the cable.
I would be very grateful if anyone has any suggestions. I can take it back to the shop from where I purchased it, but that is about 1 hours drive away, and I need my computer every day, so I cannot leave it with them for any length of time, before driving another hour there and back to collect it.

Answer:Satellite L500-13W - Doesn't charge properly

hi merriman,
hope that isnt related to a hardware fault...

try the following:
- boot machine without mains, only battery
- while booting press F8 and dont choose any option, screen will stay (better is to do this with a dos boot disk but..)
- let the battery run empty
wait about an hour and make the same procedure again
this time runtime should be much more shorter!
- connect the mains and let the battery load 24hours without using machine, dont turn on (i think 12 h will be long enough too)
after this run machine without mains until the system requires "more power"
avoid short loading cycles, every load cycle decreases the capacity of the battery
allways ac- power means: every 2 minutes battery is checked and reloaded, this means in a year the load cycles are wasted...

7 more replies
Relevance 95.94%

hi

first time on this board in the hope of solving this problem.

I frequently import CDs into Itunes. We have had the L500 for just under a month and I have noticed it does not play some CDs properly. It plays all DVDs just fine just so you know.
For example, I bought two brand new CDs from HMV on Saturday and only one of them plays properly. The offending item when played - the audio from it sounds muted and scratchy more like an old vinyl record on a turntable.

I would assume that since the CD is correctly placed in the tray and pushed in correctly that it will play. However something is wrong but I do not know how to fix it at the moment.

P.S I also tried playing the CDs on my PS2 and they play fine so I am thinking it is something in/on the laptop.

many thanks for your time

mango2977

Answer:Satellite L500 - Doesn't play some CDs properly

Hi

Have you tested other players instead iTunes? I can recommend VLC media player that is a freeware too.

And what OS you have? Why you didn?t post any informations about this?

7 more replies
Relevance 94.3%

I bought a Satellite L500-19C with Windows 7 64 bits and I'm having troubles with the configuration of the keyboard for the correct use of portuguese language.

When I try to accent a letter,par example "a", I get aside "~~" instead of the accent above the letter. I've checked all configurations from Windows and Toshiba SW and everything seems to be fine tuned to portuguese (Portugal).

Please help me in the way to correct it.

Answer:Satellite L500-19C - How to configure keyboard properly?

Hi

Normally you can change the keyboard layout if navigate to control panel > Keyboard. There you should add the keyboard layout that you want and remove all other layouts that you don?t want.

After this the keyboard should work properly.

3 more replies
Relevance 93.07%

I need your help to sort this problem out my accessibility key does not work, when i press on FN key to switch my wireless on it does not work.
As when i go to program files>Toshiba>utilities>TACSPROP.exe a warning alert shows up telling me it cant be used in this operating system.
And for your information i have Windows 7 32bit.

So you are highly appreciated to tell me what to do with this issue.

Answer:Re: Satellite Pro L500-1VX- accessibility (FN key) does not work properly

Did you install Windows yourself? Or is it the preinstalled Windows from the factory?

Go to the Toshiba website and navigate to the Support/Download section. Download and install the latest Value Added Package.

6 more replies
Relevance 89.79%

I have a Satellite L500 and the FN key does not work for connecting to a wireless network or to the F10 key and previously worked?

Help is urgently needed.

Answer:Satellite L500 - FN key doesn't work

Hey,

So if your FN keys don?t work anymore, I would recommend reinstalling Value Added Package and Flash Cards Support Utility. These tools are controlling the FN keys.

http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

On this page you can download both tools. Just download and install it, after this you should be able to use FN keys again.

Check this!!! :)

2 more replies
Relevance 88.15%

Hi.

I have a Toshiba L500-13w (PSLJ3E-00X01G03) problems with the keyboard. The keyboard does not work. Already tested on windows, or even to access the bios.
I bought a new keyboard, and changed. It does not work. Any way to solve this problem?

Thanks.

Answer:New keyboard does not work on Satellite L500-13W

What happened with the notebook exactly?
Did you spill some kind of fluid on the keyboard maybe??

The keyboard is connected to the motherboard with an flat cable?
If the keyboard controller on the motherboard has not been damaged, then new keyboard should work

3 more replies
Relevance 88.15%

A month ago I throw liquid on my laptop ?? Nothing happened at first, but 4 days ago I noticed that the ESC, 1, Tab, Q, CAPS LOCK, A and Z keys don't respond, don't work. In addition, when I activate the CAPS LOCK with the WIndows keyboard on screen, the CAPS LOCK's LED switches on in the real keyboard.

I've asked the TOSHIBA Technical support and they say it is a physical problem instead of electronic. What do you think?
I've though to buy a new keyboard for my laptop, but the thing is I've got a spanish/catalan keyborard and currently I'm living in UK.

Any advice? Try to order a keyboard from Spain and send it to here could be an option? But where do I get a Spanish keyboard?

Thanks a lot in advance.

Answer:Left side of Satellite L500 13N keyboard doesn't respond

Hi,

When liquid spills on a keyboard it gets into the circuit and membranes of the keyboard and causes it to corrode or short. Basically you need to buy a new keyboard since it's generally not possible to repair it.

A Toshiba repair center may be able to get you a Spanish keyboard, there is an ASP list on the Toshiba website.

2 more replies
Relevance 87.74%

I can't get the mouse wheel to scroll in any application using an external mouse - the touch pad scrolls ok.

I have tried many different mice. The wheel button brings up a display of all the programs I have open (Windows 7) but moving the wheel does nothing. I'm currently using a Microsoft cordless mouse but I have tried it with corded mice as well. Nothing seems to work.

Thanks

Answer:Satellite L500 - Mouse Scroll doesn't work

That?s really strange.
Have you maybe installed some application that you got with this Microsoft mouse?

I have two notebooks and two external devices. One is Logitech and the second one some cheap no name mouse and both were recognized properly on preinstalled Win7.

2 more replies
Relevance 87.74%

Now I have wanted to connect my Laptop to my TV again (I have done this before by using an HDMI cable and FN+F5, however not anymore.) but now for the first time I have noticed that the FN key does NOT bring up the menu it used to bring up when I pressed it before and I have no idea what is causing this.

I have tried using google ect to find a solution and the thing I noticed is that when I go in Start>All Programs>TOSHIBA>Utilities other people seem to have "Flash Cards" and "Flash Cards - Setting" now all I have is Flash Card Help, Restart Flash Cards and Settings for Flash Cards. I am just saying this to see if this has to do with the problem anyways moving on.

I would like to know how to fix this problem I already tried to install the Value Added Package but it did not help at all and this problem was probably caused due to me fiddling around with my laptop. Thanks in advance.

PS:
Toshiba Satellite L500 (Part Number thingy: PSLS0E) Windows 7 64 bit.

Answer:Satellite L500 PSLS0E - FN Menu doesn't work

Hmmmm..... Usually Toshiba Value Added package reinstallation schould help.

Try please one more time to remove VAP from the system, restart your notebook and install latest version from Toshiba download page.

2 more replies
Relevance 87.74%

I've upgraded my Windows Vista to Windows 7 Utimate 64 bit (Upgrade not clean install) for my Satellite L500-126.

Everything works fine except the hotkeys (FN+F keys), the hotkeys worked fine in Vista before upgrade. I want to reinstall the drivers or applications for the hotkeys but the downloads page confuses me a lot. Which driver and applicantion I should download for that hotkeys?

THX!

Answer:Satellite L500-126 - Hotkeys doesn't work on Windows 7

Hi

For the FN keys and all other ?special function? you need only the Toshiba Value Added Package. It contains all drivers that you need for these functions:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

I have installed Windows 7 on my Satellite A300 and Qosmio F50. After the installation of Value Added Package I can successful use the FN keys. :)

14 more replies
Relevance 87.74%

I have problem with my wireless switch. Take a look at this [picture|http://bildr.no/view/591716]. It says "bryterstatus: p?" which translates (poorly) to "switch status: on".

Although, when I press Fn + F8, nothing happens. All the other FN + "random button" hotkeys work though. In other words, I can't connect to my wireless. I know that it works, because I can connect with my iPhone. There's also nothing wrong with the connection, I've tried to deactive / active on and off. Tried to restart my laptop. I've even downloaded new drivers. Nothing seems to work. How can I turn on the switch?

Best Regards,
Miguel Rodrigues

Answer:Satellite Pro L500 - Wireless button doesn't work

Hello Miguel

Has your notebook ?factory settings? or you have changed something?
Have you installed own operating system or notebook still has original preinstalled operating system?
Is WLAN card installed and listed properly in device manager?

WLAN usage is so simple and by ?default? it must work properly. The same principle is on all Toshiba notebooks same. When you want to use WLAN you must move WLAN switch to position ON and use FN+F8 key combination to enable WLAN card. That?s all.

What you can try is to reinstall Value added package?

7 more replies
Relevance 86.92%

I am using windows 7 ultimate x64 on L500-126, the new win7 x64 drivers have been available since yesterday.....

However, the Flash cards (Fn Hotkeys) still doesn't work after the installation of the new VAP. The flash cards is able to show up at the top of my screen, I can click them by mouse, but the Fn combinations does not work at all!

I've noticed that there is a downloadable driver called "Flash Cards support", even I installed this application the problem still remained.

Then I uninstalled VAP and kept "Flash Cards support", to my surprise, the combination of Fn+F6 and F7 (Adjusting brightness) worked! however, without VAP I could not use other combinations.

Are there still problems with the new VAP for win 7 x64?


P.S. The new "Hardware setup" seems to be a problem as well, I tried to change some configurations in this application but after re-boot all the options went back.

Answer:Satellite L500-126, Flash cards (Fn Hotkeys) still doesn't work

Please don't create different threads about one and the same theme!
Follow your first thread:
http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=182199

1 more replies
Relevance 86.92%

Hello,

Why the Toshiba DVD Player doesn't work when i plug the HDMI cable for OUT on my other screen larger...

while it plays nice the DVD on the computer, and while i can get the signal HDMI OUT with VLC playing other video formats...

I hope there is a way to unlock this, because i prefer to play DVD from my computer (for sound issue as i ear not well)

Thank you in advance for your help, if you can.

Regards.
Mylene
(Satellite L5001QK France)

Answer:Satellite L500 1QK - HDMI out doesn't work with Toshiba DVD Player?

Hello

To be honest I don?t know 100% what your problem is.
If you want to watch DVD movie on your computer using Toshiba DVD player but the pic should be shown on the external display please do as follow:

When you have connected HDMI cable to external (other) screen, use FN+F5 and switch to this external display only. When you see desktop on the external display start Toshiba DVD player and I think everything should be OK.

2 more replies
Relevance 86.1%

Satellite L500-1WP

After update from Windows 8 to 8.1 my external USB 3.0 disk do not work.
Windows message: "Device not recognized".

Answer:Satellite L500-1WP: after Win8.1 upgrade external USB 3.0 disk doesn't work

Hi

I guess you are talking about external HDD which supports the USB 3.0 standard.
Right?

Did you try to connect the external HDD to another USB ports?
Do the USB ports work properly in connection with other USB devices?

Does the USB 3.0 device support Win 8.1?

You should check this.

2 more replies
Relevance 86.1%

Hello,

I have updatet my Toshiba Satellite L500-20X to Windows 8.
Unfortunately, since this update my WLAN Switch no longer works. All function keys work to F7, only F8 (WLAN switch) and F9 (touchpad) no longer work.

What can I do?

Thanks in advance.

Kind regards
Klaus

Answer:Satellite L500-20X - WLAN switch doesn't work after Windows 8 Upgrade

Satellite L500 is not Win 8 upgrade supported? so I think the problem is a missing driver or software?

As far as I know in order to use the FN buttons the Value Added Package for Win 8 needs to be installed.
Check other driver area for Toshiba notebook series supporting the Win 8.
Maybe you could use the VAP released for other series.

4 more replies
Relevance 84.46%

Hi,

My Sat Pro 6100 has just been away for the usual motherboard and power board replacement with Toshiba, but now I have a strange keyboard problem.

When I turn it on, all the keys work. After a few minutes, '3' doesn't work, then 'r' fails, then '5','7','8','9','0' stop working. At this stage I can feel something getting very hot under the middle of the keyboard. A reboot and no keys work. Another reboot with an external PS2 keyboard, and the internal keyboard is still faulty (some keys work, others don't) but the external one works correctly.

Now if the pc didn't get so hot under the middle of the internal keyboard, then I would conclude that the keyboard was faulty, but for it to fail slowly and sequentially like this, and it fails the same way every day (Since the Toshiba rebuild!).

Maybe, internal keyboard controller overheating?
Does anyone know what this might be? :-(

Cheers,
Homer

Answer:Keyboard on Sat Pro 6100 doesn't work properly after remedial work

Right under the keyboard of your pro 6100 is the VGA graphics controller (the keyboard cable plugs into the same card). It is normal that this part becomes warm during usage.

It's strange that your problem appears after a while and not right away.

It might be just an improper reseating of the keyboard cable (it's a thin layer like a photo film-negative) that easily pops out, but... it can be something more serious, too. (Especially since you had the upgrade done where hardware had to be changed)

I would consult the service center once again and ask for instructions how to deal with this. Don't ignore it (by using an external keyboard instead of the malfunctioning internal) as it might end up into something more serious soon...

Regards

electrochain

P.S. Please keep us updated on your steps

1 more replies
Relevance 83.64%

I spilled drink on it, busted. Weird. numbers and. symbol2s appear when I type.

Not paying £29 for new k1eyboard...

How d.o I fix?

btw.. Need Mac Keyboard... thus pricy
 

Answer:My keyboard doesn't work properly

Try this:
http://theminiblog.co.uk/archives/2006/11/16/how-to-cleaning-the-apple-keyboard/
 

1 more replies
Relevance 83.64%

Hello i have a problem with my keyboard, some keys doesn't work, keys like the letter <i> and some numbers. Could you please help me??  i called the line support but they said to me that the warranty expired but i bougth my laptop on february 2016 using your websde and also when i check that on your websde also said i have 3 more months remainng. Thank you ps. i dont speak englsh well so i am sorry for my bad englsh 

More replies
Relevance 82.82%

Hi

I recently purchased my laptop G20 but I am not very satisfied with the keyboard of it, since I am university student and I need to do a lot of project typing and whenever I use Microsoft office to type my documents the keyboard keeps jumping to 2 sentence above suddenly , I was wondering what could be the result ? Can it be FN button on keyboard is there any possibility I can disable that button while typing my documents?
And my other problem is my touchpad mouse sometimes gets stock and it needs to load for like 1 or 2 second before starts moving, what can be the problem?

Please keep me informed.

[email protected]

Answer:Qosmio G20: Keyboard doesn’t work properly

Hi,

The reason your cursor is jumping is because you are touching the mouse pad while you're typing this has the effect of clicking the mouse button and moving the cursor to where your mouse pointer is! If you want to put this to the test press Fn+F9 to turn the mouse off then type and you wont have the problem.

2 more replies
Relevance 82.82%

Hi,i purchased a T61 about a year ago and now i have a problem with the ö - key. It doesn't respond at once and i have to hit it rather hard before i get the character. i never spilled any liquid over the keyboard, so i have no idea where that comes from. is there a way to clean the keyboard, especially under the keys? i.e. can i just remove a key just as on normal keyboards without destroying the keyboard? Thanks for your help! julius

Answer:Problem with keyboard - key doesn't work properly

you can take te key off, by gently pulling on it. Do you have warranty still?? If you do then if the cleaning don't work, you can call up the warranty department and see whether they can replace the keyboard for you. 

1 more replies
Relevance 82.82%

Hi Folks

Just bought a Tecra 540cdt second hand and the keyboard is a bit strange - The A key doesn't work and some of the keys seem to do odd things -SHIFT prints a question mark and the END key operates caps lock etc. I am not sure if this is a knakckered keyboard or whether same strange keyboard setup has been done. If it is a knackered keyboard will installing a replacment solve the problem???

Also, is it possible to replace the CD drive with a DVD ROM drive. From the looks of it all of the DVD drives I have come across seem to be model specific.

Cheers

Peter

Answer:Tecra 540 CDT: keyboard doesn't work properly

Hi

Maybe your OS has wrong country keyboard settings.
Check it in the control panel settings. But for me it sounds more like a keyboard or keyboard controller malfunction.
Maybe also looses keyboard cable.
I'm not sure if only a new keyboard will solve the problem. I think the detailed diagnostic test is needed.
If you want to upgrade your notebook with the DVD drive so you have to check firstly if it's supported and compatible. If you install not compatible drive so you will get a IDE error and the BIOS will not recognize the drive.

6 more replies
Relevance 82%

Hay!!

Can anyone please tell me why my DVD-Rom can only read audio, video and data CDs but not any kind of DVD-rom. I can hear the lens moving but rather in jerks as if trying to find something and when I double click on the DVD- rom drive in my computer it shows an empty DVD with no files. Further when I check the properties for the DVD it gives an unknown file format. I have a satellite P20-S103 a very old driver (2001). PLEASE HELP. I am desperate!!!

Cheers!!

Answer:Satellite P20 – DVD-rom doesn’t work properly

Hi

Well, it seems like the beginning of the end. Mostly such issues occur if the drive has a hardware malfunction. Maybe it?s a lens calibration problem. Usually only the drive replacement can solve such issues.
But first of all you should check if the drive removing from the device manager will help.
Please remove the drive and reboot the unit. The OS should recognize the drive again.
Check if after this replacement the drive works properly.

2 more replies
Relevance 82%

Hi All

Please bear with me - I'm a newbie to this !

I have a Satellite M30 and have problems with the integrated DVD ROM S6112 drive.

It plays bought audio cd's fine and rips OK. Doesn't appear to play bought DVD's either. Cannot burn to blank CD-R's or RW's or copy any data files to it. Does not seem to recognise any kind of blank disks - clicking noise once disk is inserted.

I have had to buy an ext hard disk (non-Tosh) which works fine on all above - but it is not practical for me to carry the hard disk around in my job !!

Can anyone help pls. ?

Rgds

Mike

Answer:Satellite M30: CD ROM doesn't work properly

Hi

Generally such drive issues occur because of wrong lens calibration.
In this case there is nothing to do and mostly only the drive replacement can solve the problem.
But firstly you should try to remove the drive from the device manager. After the new rebooting the OS should recognize the drive again.
You can also try to run the Troubleshooter in the drive properties.

2 more replies
Relevance 82%

my keyboard starting to act wierd for about a month ago. my keyboard sends multiple keys to my laptop if I press the a button, the tab,esc,caps and the 1 key. for example: if I press a, I get a axcfn,./; alt is also active. as this is quite ennoying, the tab sends me to sleep mode, and esc activates flightmodus (great when gaming online). somehow I got to fix this temporary when rebooting or gently smashing into the keyboard (I tried to vacuum clean it, but that failed too).well, this morning have these keys decided stop sending anything to the laptop.  has anybody any Idea of what could happen and how I could fix it? thanks in advance Peter













Solved!

Go to Solution.

Answer:Keyboard doesn't work properly on Acer Aspire V3-7...

Hello Peter, 1- You can check it on the Acer system information page (Acer-Justin's info).2- I would try to ""Load optimazed defaults" or "Load default settings" in the bios setup utility [F2]3- NX.M8SEH.018 - Aspire V3-772G-747a121TMakk (NL model?)

6 more replies
Relevance 82%

Can't hit the space bar b/c the screen zooms in instead of giving me space in the text  - Can't use space bar at all Can't use the letter T either. Various other buttons don't work either (I actually had to cut & paste the spaces and letter "t " into this post!) Please help!!

Answer:keyboard problem- spacebar doesn't work properly + much more

And now that  have full use of my keyboard, let me explain more.. This problem happens randomly, usually when the computer has been on for more than an hour and generally I will have put it to sleep and I discover this problem when I resume my windows session (I'm running vista). Wihtout NumLock on the 9 letters on the right side of the keyboard act as their corresponding numbers, th spacebar causes the screen to zoom in as if I was holding in the blue Fn key, and none of the arrow keys on the bottom or home keys on the top right will work. I have no idea how this resolves itself, I generally just restart it and leave it alone for several hours (note that restarting alone will not help). If anyone has any ideas as to how to correct this problem, I am open to suggestions. The only thing I can't do is wipe my drive b/c I have a program for the Bar Exam in July that I cannot re-register so if I delete it, I'm S.O.L. Thanks!! 

2 more replies
Relevance 82%

Hi,

I have an Asus R510D laptop, which originally came w/ Windows 8 installed. I downgraded to Windows 7, and the very first time I booted, everything was fine. Ever since then, after boot, at the login screen, the keyboard does not allow me to type my password. However, I am able to use the function keys, which is the workaround I've found for this issue.

After booting and reaching the login screen, I must put the keyboard to sleep, then awaken it, for the keyboard to function properly. I've tried updating the driver, but it doesn't solve the issue. I was wondering if anyone had come across an issue like this. Any help would be greatly appreciated. Thank you!


Jeff

Answer:Laptop Keyboard Doesn't Work Properly After Boot

You did mean R510DP right? That laptop does not support Win 7. Have you tried installing the Win 8 drivers in Compatibility Mode

Asus R510DP Driver & Tools Just a thought.

2 more replies
Relevance 82%

Hi,

I have an Asus R510D laptop, which originally came w/ Windows 8 installed. I downgraded to Windows 7, and the very first time I booted, everything was fine. Ever since then, after boot, at the login screen, the keyboard does not allow me to type my password. However, I am able to use the function keys, which is the workaround I've found for this issue.

After booting and reaching the login screen, I must put the keyboard to sleep, then awaken it, for the keyboard to function properly. I've tried updating the driver, but it doesn't solve the issue. I was wondering if anyone had come across an issue like this. Any help would be greatly appreciated. Thank you!


Jeff

Answer:Laptop Keyboard Doesn't Work Properly After Boot

You did mean R510DP right? That laptop does not support Win 7. Have you tried installing the Win 8 drivers in Compatibility Mode

Asus R510DP Driver & Tools Just a thought.

1 more replies
Relevance 81.18%

HI!

My DVD-Rom does only recognize DVD?s but no CD?s!
I?d sent my notebook in to Toshiba and they installed a new DVD-ROM, but now there are these problems!

Does anyone else have this problem and can help me?

i don?t want to send it in again!



sorry for my bad english!!!

Answer:DVD-ROM SD-R2412 doesn’t work properly (Satellite Pro A40)

Hello Andre

I assume that the drive should works properly if the unit has a new one. Maybe is the problem caused by CDs that you use? First of all you must try to use original CDs or DVDs. You are not precise in your posting and you didn?t mention which kind of media you use. I can imagine that there is problem with self burned CDs.

Bye

3 more replies
Relevance 81.18%

Hi,
I have a Satellite SM-30. I am able to receive files from other computers (through infrared transfering) but when I try to send files it says "WIRELESS CONNECTION ERROR. NON VALID DATA WHEN TRYING TO TRANSFER THE FILE." Both computers recognize each other, but I can't send any file. The other computer has an older Window OS. (dont know if that has something to do with the problem)

Answer:Satellite M-30: Infrared doesn’t work properly

Hi

Sorry but I have never hear about this error. Usually there should not be any problem. The only thing can be that you want to send the file that can be already in use and can not be removed to other unit.

2 more replies
Relevance 81.18%

Hi,
Since I bought my laptop Satellite C70D-B-300 i still having some problems:
1) I cannot turn off the laptop,(the screen turn off but laptop still running), even I cannot close session
2) Start menu and windows apps sometimes I cannot open (if I click nothing happen)
3) 3/4 times a day the laptop get in crash, I cannot do nothing, I need to shut down with power button (press for 10sec) even with ctrl+alt+del doesn't work
4) new problems with windows 10, i cannot open store, sometimes cortana and star menu doesn't work so I need to restart...but I guess is windows problem not toshiba

thanks in advance

Answer:Satellite C70D-B-300 doesn't work properly

There are too many problems.
In my opinion you should reinstall original recovery image and test notebook functionality with “factory settings” again.

Is this an option for you?

3 more replies
Relevance 81.18%

Hi all

I bought this brand new laptop in September. When using the mousepad I find that rather than the cursor always moving as expected, it sometimes magnifies the screen, I.e, it zooms. I have to press the escape button to make the cursor move again (after pinching the touchpad to bring the screen back to size). I thought maybe it was just me not being used to the touchpad but my wife says it annoys her too. I've hardly used the laptop so do you think it's faulty? Would this be covered by the warranty? It is very, very annoying.

Thanks in advance for any help

Paul

More replies
Relevance 80.36%

Hello,

i currently own a Toshiba Satellite L755-1ED and sound is not working as it should for some weeks ago. When i try to play an audio file or a video, offline or online, sound works well for the first minutes and then suddenly disappears. I use Windows 7, and when that happens, sound is still being recognized for the system as you can see it in the volume control, but any sound comes from the speakers. However:
- If i pause the video and replay it in like 30 seconds, sound usually comes back. Also if i go to Sound Settings in +Hardware and Sound+ in the +Panel Control+, and then try to check if it works, it usually does after the first or the second attempt.
- If i use a headset sound always works perfectly.

I've already installed the last updates of my sound card and i don't know where the problem might be. Some help would be welcomed.
Thanks a lot and sorry for my English (it's not my native language).

Message was edited by: BleuHiver

Answer:Satellite L755-1ED - Sound doesn't work properly

> If i use a headset sound always works perfectly.
That?s very interesting. Speakers port has small switch inside that helps notebook to ?recognize? that headphones are connected and when you connect headphones internal speakers will be disabled and sound comes through speakers only.

On some machines it is possible to switch between internal and external speakers manually

When you open control panel is there ?Realter HD audio manager? available or maybe ?Smart audio??

3 more replies
Relevance 80.36%

In my Satellite U940-108 I open Tempro but if I click anywhere windows show me a screen TEMPRO don?t work and have to be close

Answer:Satellite U940-108 - Tempro doesn't work properly

Do you use original preinstalled OS version?
I ask this because I have U940 too and Tempro works perfectly.

3 more replies
Relevance 80.36%

Hey

the last month my dvd-burner works very bad.

I have tryed differnt kinds of media (platinum/sony dvd+r) but everytime it went wrong in the last part of the dvd.

Sometimes he finished a dvd but in a stand-alone player it will shock.

Maybe new firmware will work but i can't find it I have now a Ts-Lo802a with t035 firmware.

Answer:Satellite P200-1ay - DVD burning doesn't work properly

Hi

You should take a TDK-R DVD.
I mad a goo experience with this kind of DVD disk.

I had a similar issue. My burned DVDs didn?t work in one of my DVD players.
One player could read it but the other didn?t.

I tested the DVD-R from TDK and it worked on both players

3 more replies
Relevance 80.36%

Hi there,
I have a Toshiba Notebook Satellite 5200-902. When I registered it it tells me that it is 5200-802. My problem is that my DVD-RAM which is Masthista UJ-810 used to work fine and everything but a couple of days back it stopped opening virtually any data or music CD.

It doesn't recognize that anything is in it. When I double click on the drive icon it tells me that there is an "I/O device error". The funny thing is that sometimes it may open the CD sometimes it doesn't. I tried to find an update for the driver which I didn't manage to so I reinstalled the driver and it didn't help. The device manager is telling me that the device is working fine.

I would also like to enquire about the posiibilities of updating the graphics card in the laptop "GeForce GO5600 FX" to another card with a memory of 128 or 256 MB and if the model is designed for updating the Virtual memory from 512 to 1GB RAM.
Thanks in advance for your reply.

Yours

Trable

Answer:Satellite 5200-902: DVV drive doesn’t work properly

Hi,

the difference between the 802 and 902 model is only the HDD size and the CPU speed.
802: 60GB, 2.2GHz
902: 80GB, 2.4GHz
I don't know why it is not registered correctly, but I think that's not so important.

About your DVD drive I think the error message indicates a hardware fault. Should be checked by service.

Upgrading the graphics card is as far as I know not possible for notebooks.

But you can upgrade your system memory up to 1GB with two 512MB modules(DDR RAM).

Bye

1 more replies
Relevance 80.36%

After my windows Vista system crashed on Dec 16 2011, I had the recovery done.
After that, I didn't find any webcam driver on the whole laptop. On the support page of Toshiba I finally found version 1.7, but that doesn't work at all!

It always shows up: Webcam driver open fail, please restart camera or computer. As it is a built in camera I tried it with the restart of the computer, but that didn't help at all. So I tried it with the option to repair the driver with Install Shield Wizard. The program has done something, but without any success.

So I uninstalled it and reinstalled it and it didn't help at all!

Has somebody an idea?

Answer:Webcam on Satellite A300-1MX doesn't work properly

Hi

Found a Toshiba knowledge base article which describes this error and provides a solution to this issue.
+Why does the error message display: "Webcam driver open fail. Restart camera or computer."?+
+http://aps2.toshiba-tro.de/kb0/OPT84026F0000R01.htm+

But its related to Portege M600, and Satellite U300 only.
However, you should also try to perform a BIOS update. After that set the BIOS to default settings and save the changes?. Then try to reinstall the webcam software once again.

You should also check the device manager. Here in device manager the webcam should be recognized as a USB device? if this is not the case then this means that the webcam has not been recognized by OS and this means that there could be an hardware issue?

As far as I know the webcam is connected to the USB controller on the motherboard. If the cable connection is lose, then the webcam would not be recognized in device manager; neither as USB device nor an unknown device.

1 more replies
Relevance 80.36%

Hello,

I have the problem with my new Toshiba Satellite A500-132.
After one week of using, right speaker has started be more silent than left, I often hear crack, sometimes right speaker dosn't play anthing (only silence).
Did you have same problem with your Satellite A500?

I would send laptop to service for fixing this issiue.

Answer:Right speaker doesn't work properly on Satellite A500-132

You are right. Contact nearest Toshiba authorized service provider and let them check your notebook and speakers functionality.
If there is some hardware problem warranty will cover repair costs.

Since last week I have Satellite A500-11G and everything works well. No problems at all.

2 more replies
Relevance 80.36%

Hello, i have been having problems with my cd drive, it wont read anything in windows, but it will read my system restore CD in DOS and restores my whole system. I called a person at the help desk and he said to try and restore the system and see what that does and it still hasnt made a diffrence, please help!!!!

Answer:Satellite 1100 - CD Drive doesn`t work properly

Hi,

I think your Helpdesk staff had run the Win XP System Restore to restore the OS! If this doesn't work, you can try to reinstall the DVD/CD standard driver at the Device Manager!

If this doesn't solve the problem I think a full system recovery should be done! Then it will work!

Bye

1 more replies
Relevance 80.36%

Hi, very new to wireless laptop usage. bought a m500. trying to go thru manual is very tiring as cannot distinguish areas. having constant problem with:

using sattelite. walk away for a moment and screen goes black. learnt this is hibernation. should come back by simply touching touch pad or moving mouse. this does not happen. all freezes and have to force shut down. have done this a million times in the past two weeks. contacted supplier as touch pad would not work at all, advise to download drivers but found out simply disabled touchpad in error with button below space bar and "fn and f9" together ables it again. please advise if you can.

toshiba was also contacted and they tried to tell me to do a back up and reset to factory settings as a software issue could be doing this. the only thing we have on this is itunes. all else is standard folders and applications.

also,have never done a back up b4. how long does this take and can you use sattelite whilst backing up.?

Answer:Satellite M500 - Doesn't work properly and need general help

Hi chucky,

To be honest your posting is not easy to understand and one information I miss like your operating system.

Theoretically it could be a software problem, maybe a virus or something else so it doesn?t make a difference how many programs you have installed.

Satellite M500 doesn?t seems to be a European model so I don?t know how HDD recovery works exactly but let me give you a word of advice: Just take your Toshiba recovery disk. This disk contains an image for factory settings and with these settings everything should work properly.

In my opinion if you get the advice for restoring factory settings from Toshiba ASP, you should do this! ;)

2 more replies
Relevance 80.36%

The issue is that also if i set on disable the option of hard drive stand by, after 2 minutes the hdd stops working until i do something like change page or use some program. Is it a bug of Toshiba's utility?

Answer:Satellite M70 power saver doesn't work properly

Hi

Sorry but your comment is a little bit confuse.
You can set the HDD power OFF to different steps.
This function reduces the power consumption of your PC by stopping the hard disk rotation, provided that data is NOT read from or written onto the hard drive

You can also use the stand by mode. This function must be enabled and the time must be set. The notebook goes into stand by mode if you don't use the notebook several minutes or hours. It depends on the time setting.

2 more replies
Relevance 80.36%

Hey,

I opened some time ago following thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=228228&#228228

I installed the driver. It worked for some time.

After a few restarts - the same error is back.

No scrolling (no matter with 1 or 2 fingers), or other special functions of the pad were more possible. :(


Can someone tell me why the problem occurs? And why again and again if I did it once fixed?
What can I do to ensure that the problem is solved for every time?



I hope, you can help me.. ;) Thanks!!

--
Kind Regards,
psp.

Answer:Touchpad doesn't work properly on Satellite A500

Hi

The touchpad special functions can be configured in the control panel -> mouse -> device settings -> settings button
There you can enable and disable all possible touchpad features like scrolling, tapping, etc?
Of course the touchpad driver has to be installed properly.

I don?t know why this happened again, but in most cases different updates (Microsoft updates) or other preinstalled software could cause this?

7 more replies
Relevance 80.36%

Hi all,

I have commited the mistake of flashing my Satellite A200-22C (PSAE6E ) old bios to the new 2.60 version.

Since I've done that, the keyboard doesn't work on the bios screen, so I'm unable to manage anything in the BIOS.

When Windows Vista 32b begins the first time, the keyboard doesn't work. If I close the session and then I begin it again, it works properly.

The touchpad is lost and I have to use a USB mouse. Is not a driver problem cause all drivers are updated and working properly.

The question is: ?Why Toshiba doesn't let users download old version of BIOSes? ?Where or who I must contact for get the original BIOS? ?Why the flashing utility make a backup of the OLD BIOS and then doesn't give you the option of recovering it?

Please, help me to recover the original BIOS in order to recover my touchpad and my keyboard because I can?t find any mail or anything to contact with tech support in this web.

Thanks!

Answer:BIOS 2.60 doesn't work properly on Satellite A200-22C

Which version was old BIOS?

By the way: you can contact Toshiba service. They have access to BIOS archive and they can provide you old BIOS version.

1 more replies
Relevance 80.36%

When the power button is pushed the power and wireless lights come on, the fan whirs for a moment then nothing more happens. If I take out the battery and leave it for 30 mins then it boots fine when the power button is pushed. Currently away from home, but have internet access.

Running Windows 7.

Any and all suggestions welcomed!

Answer:Satellite T110-107 - Reboot doesn't work properly

Hi buddy,

Since when do you notice this problem and have you changed something on hardware configuration?

It?s hard to say why it happens but fact is it must be a hardware issue? Have you installed newest BIOS version for Satellite T110? You can download it on official Toshiba website:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

But before you start the update, close all running programs (also AntiVirus and Firewall).

8 more replies
Relevance 80.36%

My TouchPad doesn't work properly, it stops working after some seconds after the start. Can anybody help me?

Answer:Satellite L50D-B - TouchPad doesn't work properly

To be honest it is not easy to help with such problems.
What happen exactly? Is touchpad completely off? I mean is there any kind of reaction?

Have you tried to enable/disable it again using F5 button?

11 more replies
Relevance 80.36%

When I turn on the computer about twenty minutes is quiet. Than fan starts like a hurricane, slows down and stops. It lasts few seconds. The fan works in this way regularly with one minute intervals.
Is there any possibility to switch the fan on continuous work in slow motion?

Answer:Satellite L20-182: fan doesn't work properly - one minute intervals

Hi,

If you go to toshiba power saver you should be able to turn your up or down. Once you open this program from control panel, you have the option to change how much your processor runs as well as how much your cooling modules work. Turning either one down will make the fan not come on as much. Then you might want to try and use a vacuum cleaner to suck the air intake grills to clean any dust that could be clogging it up. Dust can make the fan run more because the lack of cool, fresh air entering the system to cool the cpu. Hope this helps.

9 more replies
Relevance 79.54%

My ancient Satellite 1100 has been working perfectly, but suddenly the letter 'B' and the space-bar do not work at all. I have cleaned under the keys without making any difference. Is it worth checking the connection to the motherboard? (Why this should suddenly fail I do not know).
I have plugged in an old keyboard via an adapter to the USB port, but this hardware is not recognised (although the keyboard lights up). Can I download a driver for my old keyboard from somewhere?
Any other suggestions?
Thanks for any assistance.

Answer:Satellite 1100 keyboard does not work properly

Hi there,

first of all, there is no driver for the keyboard, because it?s a core component of the machine and it?s connected over PS/2. So a keyboard which is connected over a PS/2 (and even in a notebook internal PS/2 port) won?t never ever need a driver.

And regarding the two keys: you can try it. There are just some screws under the keyboard cover which should be unscrewed ;), and then you check the cable. If you did not get some success after
re-adjusting the cable, then the keyboard is probably faulty. In such case, it would be good to check e.g. ebay for some parts.
Usually the partnumber of the keyboard should be printed on a sticker on the bottom of the keyboard.

Please give some feedback, when did it..

Greets

1 more replies
Relevance 79.54%

The problem with my computer is: the keys m,j,u and 7 (on the line) don?t work properly. Have to press the button for 20 times to get the reaction. Sometimes it`s fine, sometimes it?s awful, expecially when you starting the computer and have to put your password in. No chance!
Have the problem since a couple of weeks. Have Win10 since the beginnig of August- there were no problem. Bios should be fine, it`s 1.50 for this model.
What would be your suggestion?

More replies
Relevance 79.54%

Hi there,

My sound drivers do not work properly on Windows XP SP3. I have five speakers in my Satellite X200-252 notebook but only two are detected by the OS. When running on Windows VIsta there are no problems.

I downloaded XP sound drivers from the Toshiba website so they should be up-to-date.

If you know how to solve this problem, I would be grateful for any advice.

Answer:Satellite X200-252: sound driver doesn't work properly on Win XP SP3

Man you want install ok your sound while u use sp3 from beginning.
Install XpSp2 , then install kb888111 , and the drivers for your high definition audio !
It worked perfect for me !
I had the same problem.
good luck.

1 more replies
Relevance 79.54%

When I shut the lid on my laptop it indicaes that is in sleep mode by blinking the green light but when I lift the lid up, it says that windows were not shut down properly.

I have checked all the settings and they seem ok. What could it be?

Answer:Satellite Pro L300 - Sleep mode doesn't work properly

Hi Lop,

What settings did you check exactly and which OS you are using?

I have Satellite L300 and Windows XP. I?m using TOSHIBA Power Saver and there I can set what happens if I close the lid, press the power button, etc.
Check this!!

Furthermore on XP make sure that TOSHIBA Power Saver Profile is chosen in Windows power options.

1 more replies
Relevance 79.54%

Hi all,
I just bought a Satellite M40 laptop which purpose will be to be used as a mobile audio system.
For that, USB audio devices are a great solution.

Unfortunately, although it was working properly while recording (sound is perfect with all USB Audio compliant devices I could test), there's an issue in Playback as I got lots of clicks and pops.

After lots of tryings and google searches, I fixed the problem by switching from ACPI computer to Standard PC mode.
That's a workaround.

But this way, I don't know anymore what's my battery status, and my laptop do not shutdown automatically.
In fact, my laptop is no more managed as a laptop :(

I suspect a very serious issue in one of the Toshiba components management. Especially, I would not surprised to be told that power management leads to some regular short system freeze, and thus the 10ms USB audio buffers fall into underrun.

This would not bother me so much if I was not part of the technical support team of a company that is also launching some new USB audio products that will fail to work properly with laptops.

My question is :
Is there any driver / bios update that gets rid of this issue ?
If someone from the Toshiba technical support wants to handle this issue directly with me, I would be pleased to help him, as I'm concerned professionnaly and personnaly.

Thanks in advance.



[Edited by: admin]

Answer:Satellite M40: USB Audio doesn't work properly in ACPI mode

Hi

I don?t know which USB audio device you use but the most USB audio devices cannot use the USB power supply. These devices need an external A.C power supply and mostly this external power supplies are delivered with the USB audio device.

Furthermore I have read on some websites that sometimes the pops occurs because of un-synchronistic of different buffer modules or/and parallel usage of some applications.

The changing from ACPI computer to Standard PC mode is one of many solutions and proposals
You can check for some Microsoft fixes. Check if all Microsoft updates are installed.
Also change the performance options in the system options to ?Adjust for best performance?.
Disable the Windows messenger.
The Virtual memory should be set to custom size and Initial size and max size should has the same value (ie. 512/512)
In the system.ini the ?vcache? should has also the same value: MinFileCache=16384, MaxFileCache=16384
Disable the additionally devices like scanner, printer.

Like you see such issues could occur on all computers (desktop and notebooks) and it?s not a Toshiba problem. You should also contact the manufacturers of the external audio device for support and detailed informations.

Good luck

6 more replies
Relevance 79.54%

Hey,
The Lights is working but keys is not.
What can i do?
I have windows vista 32 bit.

Answer:Satellite A300-24z - VAP - buttons illumination doesn't work properly

What you can try is to reinstall Value Added Package. This package contains Toshiba Button Support utility.
Remove preinstalled VAP, restart the notebook, install latest version from Toshiba download page, restart notebook again and test buttons functionality.

8 more replies
Relevance 79.54%

Hello!

I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.

Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.

I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!

things I have tried and they still not help:
# drivers replacement, original were released in 2004. I installed recent version.
# driver settings, low latency, high latency
# asio and different settings
# pluging the interface to another usb socket.
# trying what happens when I use battery and when I use adapter
# updated bios
# turned off onboard units such as wifi card, sound card
# checked IRQ list

pops still appear.

my config:

Toshiba Satellite Pro L20
Win XP Home SP3
... Read more

Answer:Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

At first I am wondering you use old L20 notebook now. You don't have L40 anymore?

You must understand that Satellite Pro L20 is pretty old notebook model and also not the best choice for such operations. This notebook is probably designed for simplest everyday operations like internet, mails, office, a little bit multimedia and that?s all.

I don't want to say this oldie should not work with your external device but you will be lucky if someone has the same external device and the same notebook model and write about own experiences.

Do you use ?factory settings? or you have installed own operating system?

2 more replies
Relevance 79.54%

Hello.
I had use my notebook Toshiba Satellite model 1800-911 for about 3+ years and it's great and i don't had some problems. But now after installing Windows XP Professional SP2 I have one big problem. When I set to stand by mode the notebook it's going to standby mode and it's great. But the problem is when I like to go on with my work from standby mode the HDD on the notebook is activated but the display is still black and I must to reboot the system. I can't use my PC and all of my work is out... Please help

Best regards,
Nikola Todorovski
[email protected]

Answer:Satellite 1800-911: Standby mode doesn't work properly

Hello Nikola

I assume that the Windows XP SP2 update is responsible for this issue.
Well, in this case you should update the Power Saver Utility.
This you can try on the Toshiba website.
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

Maybe it?s also important to upgrade the BIOS.
Please check if your unit has the newest BIOS version.
Here you can find the BIOS.
http://www.toshiba-tro.de/subpage/bios.html
If you decide to update the BIOS please check the update procedure on this unit.

Good luck

Bye

1 more replies
Relevance 79.54%

After upgrading my Satellite P55-A5300 to BIOS 1.6 the function key 11 no longer turns sound on and off.
Instead F11 now removes the the top lines of my browser making more area to view the text window.
If you hit F11 again it returns the normal browser size window. Useful but not what I want.


Also after the upgrade my fonts in quicken changed slightly to be softer. I am on windows 8.1 which works fine.

Anyone know how to change the function key settings?

Answer:Satellite P55-A5300 - after BIOS 1.6 upgrade F11 doesn't work properly

At the beginning just one question: have you noticed the same problem if you change ?Function keys mode??
Try to change it to ?Standard F1-F12? mode and test how it reacts again?

2 more replies
Relevance 79.54%

Sorry about my English.

I have notebook Satellite A300-24z, Model number PSAG8E and Vista 32 bit.

I try to setup this driver and keys up the numbers are not having light.
I try to do this 3 times and still is not working.
Can somebody help me?

Answer:Satellite A300-24z - VAP - buttons illumination doesn't work properly

VAP is not driver but package that includes 7 different tools and utilities. One of them is buttons control and when the VAP is installed it should works properly.
Is your notebook delivered with preinstalled Vista or you try to install it on your own?

I mean if notebook was delivered with preinstalled Vista everything should be OK. have you done anything that can ?disable? this option?

4 more replies
Relevance 79.54%

Hello

I have one problem with my Satellite P100-222 notebook. Seconds do not vary. Even if you come in BIOS time is at a stop (though seconds should go). I had to install the special program for time synchronisation: ( it is terribly inconvenient.

Can someone help to solve this problem? I think that the battery (BIOS) can be responsible for it.
#I don't know how to change it.

Forgive for my English. I use the translator.

Answer:Clock synchronisation doesn’t work properly on Satellite P100-222

Help me pls)

5 more replies
Relevance 79.54%

Hello Friends,

I set up WXP on C660, no '?' marks in DM, but when close LCD the notebook makes screen black but still
running. Then I cannot return it from this sleep mode. Only when I press power button for a long time it turned off.

Please help me to have correct sleep mode.

Answer:Satellite C660 and WXP - Sleep mode doesn't work properly

>...but when close LCD the notebook...
With other words you use standard Windows settings for stand-by mode, right?

9 more replies
Relevance 79.54%

My C660-A046 version PSC1SV have a numpad problem: Miss behave

by numpad when type:
1 it's type 16
2 it's type 2+
3 it's type /3
4 it's type 49
5 it's type 5-
6 it's type 16
7 it's type 7*
8 it's type 8.
9 it's type 49

I tried to download bios but no bios in driver section for PSC1SV ... how to fix it ??

NB: sorry for bad English

Answer:Re: Satellite C660-A046 - numpad doesn’t work properly

I?m afraid you will not be able to fix it. My advice for you is to contact nearest Toshiba service provider and ask for help. In my opinion keyboard must be replaced.

How old is your notebook? Is warranty still valid?

3 more replies
Relevance 79.54%

I just recently purchased the Belkin PCMCIA USB card FSU222 card to upgrade my 1900-303 to USB 2.0, as I have an external USB 2.0 DVD/RW drive. I am running XP pro SP2, I plugged in the card and install it without any errors, and when I plug in the Dvd/Rw drive, it installs without any problems.

The DVD burner reads DVDs with no problem and very fast, but when I insert a blank DVD to record, the drive reacts really slow. I let it sit there for 150 min and no progress and my pc freezes. With my web cam plugged in to the card, it?s even worst! It freezes my pc immediately! I downloaded the most recent driver from the Belkin website but problem is still not resolved.

I read in other forums, people with same problem as me! Is anyone with problems here? Is there a more compatible card to upgrade my pc?

Many thanks

Answer:PCMCIA USB card doesn’t work properly with Satellite 1900-303

Hello

It is really not easy to say what the problem is but I assume that there is some problem with PCI-Cardbus. In my opinion ypou can try to make a BIOS update or even try to check if chip set utility update is available for your unit.

One guy at other forum recommends using a small tool called ?chipinfodemo1.1.5?. This tool allows cardbus identification and you can try to reinstall the cardbus controller driver.

Sorry but I have no other idea.

Good luck!

2 more replies
Relevance 78.72%

Hello,

I have Toshiba Satellite L50-B-17C. After upgrading BIOS to the newest version, some of regional polish characters do not work.
I am not sure that just a rootcause is update BIOS, perhaps is also possible that any other software use the same keys combination.

Keys which work well with alt together: "e"; "o", "a", "l", "n", "s"
Keys which *do not work* with alt: "z", "x", "c"

Anyone could help with this problem?

Thanks a lot!

Answer:Satellite L50-B-17C - Regional keyboard chars do not work properly

I already read about this keyboard problem and it seems that this is caused by BIOS.
You have to wait for new BIOS update. Keep an eye on Toshiba Service Station update messages.
In case new BIOS would be available, you should receive an update message.

2 more replies
Relevance 78.72%

Hi,

I have an issue with my P200-144, when I am typing very fast it misses keystorkes this does'nt happen on other keyoards.
Also my Down arrow is very stiff.

Answer:Some keyboard keys do not work properly on Satellite P200-144

For me it is nothing strange. I have older Tecra M1 and the buttons are ?softish?. On new A200 (similar keyboard as on P200) it is not the case. The pressure must be stronger as on Tecra and if I typing very fast some keys are missing.

Maybe you should type a little bit slower.

3 more replies
Relevance 78.72%

Hi,

My daughter's Toshiba Satellite Pro A100 has developed a couple of faults.

Firstly, the keyboard displays random characters such as a stuck key would. eg, if in Google or Wordpad the system will at random type a single character over and over again even when no key is pressed. Occasionally it will also open windows or programs as if the 'enter' key has been pressed, or cycle through desktop icons.

Secondly, the touchpad is non-responsive and cursor operation isn't possible from the touchpad or buttons. I don't know if the two are related.

She assures me she hasn't spilled anything on the laptop, so any help would be appreciated to rectify these faults.

Thanks,
Brian

Answer:Satellite A100 - Keyboard and Touchpad don't work properly

Hi

Can you notice the same issue with external input devices?

If not it?s time for an authorized service provider. I think the keyboard and touchpad must be replaced and the technicians can help you.

On the Toshiba website you can find a list of authorized service provider.

Good luck! :)

1 more replies
Relevance 78.72%

Dear All,

I have problems with my recently bought Toshiba Satellite U940-11X, serial no. 2D015354K.

1. With every restart of the laptop my keyboard settings are not accurate and Function buttons and symbols do not work properly. Therefore it is also not possible to enter the bios via F2 after reboot.
I have to press CTRL + SHIFT to have my keyboard properly working. I have to do this every time I use my laptop.

2. The touchpad (Synaptics SMBus TouchPad) is not working after a few minutes. The only thing I can do is plug in an external usb mouse. I have also tried to use FN+F9, does not work.


Please, can anyone help me out on this?


Thanks!
Jeroen Raijmakers

Answer:Satellite U940-11x: Keyboard + FN buttons don't work properly

>Therefore it is also not possible to enter the bios via F2 after reboot.

I see the notebook uses Win 8.
You have to perform an complete shut down to access the BIOS.

Check this document. It provides info how to change the settings in order to access the BIOS:

+Perform a complete shutdown in Windows 8+
http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm


> I have to press CTRL + SHIFT to have my keyboard properly working.
Did you check the keyboard layout settings?
For me it sounds like you are using wrong keyboard layout settings. The usage of the key combination CTRL +SHIFT changes between the keyboard layouts.

How to change this?
Go to Control Panel -> Regional and Language Options
Clicked "Keyboards and Languages" tab then clicked "Change keyboards" button. Then in the "Installed services" tree list, select the keyboards you don?t want and click "Remove.

2 more replies
Relevance 78.72%

I have recently bought a A210 series with integrated cam and I am having problems with the keyboard as when i start typing it starts to jump about in different areas of the document or sentence is there anyway to rectify it, it is operating windows vista and office 2007

Answer:Keyboard on Satellite A210 series does not work properly

Hi,

does this problem appear immediately after buying the machine? Maybe it?s a good idea to recover the machine, perhaps it could be a software issue.

On the other side it sounds a little bit like a hardware related problem so if the recovery doesn?t brought you joy then you should contact a local service partner for help.
Here you can find the nearest ASP in your country (just click on the link and you will find some):

http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT


Nice weekend
Cheers

2 more replies
Relevance 78.31%

I have the following problem with my Satellite M40X-112

After an update with Windows XP SP2 I lost the possibility to use the 1280x800 screen. There is only an 1024x768 monitor identified by the display driver. The effect is that I now get the screen displayed as an 1024 x 768 screen leaving the bottom 32 lines with random data and the right half black with one random line of the 1024 x 768 screen .

I refreshed the display driver with the recovery cd with no effect. After that I took the newest driver from Intel, but there was again no effect!!

Now I ask myself, if there two possible failure reasons:
1. a hardware defect or
2. is there a special display driver installed on the Toshiba that is not included on the recovery cd?

One additional hint: I tested also the bios stretch function, also with no result.

Can anyone help, please?

Answer:Satellite M40X: after SP2 update the widescreen display doesn’t work properly

To see if ,as you say, the problem is due to SP2, uninstall it. :-)
But I can hardly think that's the reason because so far I've never heard of SP2 causing display malfunctionality!!! Indeed, SP2, being an update, it should not cause problems.

In the recovery CD there are all the driver your notebook needs....

One question: where did you get SP2? From the original Cd or elsewhere?

Message was edited by: photonics

3 more replies
Relevance 78.31%

I have installed Windows 7 Pro on my Satellite P300 and when ever I try to use the mute button etc it starts the button setting assignment program but no options are available to select.

Has anyone come across this and a fix?

Answer:Satellite P300 - Quick launch buttons doesn't work properly

Hey Jones,

Can you please tell us what version of Windows 7 you have exactly? I mean the 32bit or 64bit version and did you download the Value Added Package especially for Windows 7? The Toshiba website shows also different P300 models, what model number you have?

Have you already tried to assign the different functions to the button? For example there is a mute.exe file as far as I know in Toshiba folder that must be assigned to the mute button. Check this!!

Maybe reinstalling the VAP could also be useful.

8 more replies
Relevance 78.31%

Hi Toshiba team,

Recently bought a new notebook.
However the microphone or sound driver (connexant pebble high definition ) doesn't work properly when using skype. Also read about this matter in various forums such as the skype forum.
People encountered similar problems such as:

-------------------------------------------
We can usually talk for a bit longer than 20 seconds, however the call will drop at a random time between 1 and 15 minutes. The strange part is that sometimes the quality of the call is good, but more than often my friend can only hear *half of what I am saying* while I usually do not have a problem hearing what has been said. The video will work so my friend can see me talking but can simply not really hear what I am saying.
Before the drop the call will usually freeze for a couple of seconds and then skype sometimes crashes. We have tried talking together without the video, however the problem remains.
---------------------------------------


I also found a suggestion by the toshiba service, just to simply increase the volume under control panel etc, but it doesn't work either..

Can you please help me on this one?
Cannot use skype at all as it just to annoying for everyone I talk to.. Quality is just to poor!!

Many many thanks

+Message was edited: link has been removed - not allowed+

Answer:Satellite P500-127: microphone or sound doesn't work properly using skype

Hi

I?m Skype user too and to be honest? everything is working properly!
I can use my internal webcam as well!
But I?m using the Win XP with Skype?

I assume you are using Win 7 and Skype?

To be honest, I doubt it?s Toshiba notebook issue?
If it would be a notebook (sound driver) issue then you would notice the same problems recording and creating audio files... but I doubt this will happen...

Therefore it must be an software issue? possibly an combination of Skype, Win 7 and Conexant driver?
Who knows?

But as I said above? my Skype is running fine with Win XP!

2 more replies
Relevance 77.08%

I have a Satellite M40X and I had update the Bios to v. 1.60 and now the keys u, m, 7 and the arrow up are not working properly. The problem is that there is not other Bios version to use.

How can I resolve my problem?
Can I recover the old bios version?

Thanks
Gabriel

Answer:Satellite M40X: After Bios update keyboard keys don't work properly

Hi there,

no you won?t be able to recover the old BIOS. The only two options are:

1. Retry the BIOS update and check if it?s working
2. In case of no success, please visit the [ASP Locator|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT] to search for the nearest ASP in your country and to ask them for a hardware checkup and repair.

Greets

1 more replies
Relevance 76.26%

My satellite pro C850 1HE keyboard intermittently stops working properly and starts opening programs e.g pressing F will open file search, C opens computer that sort of thing

is there a permanent fix to this problem?

its not anything to do with programs installed nor is it anything to do with browser settings.
restarting the computer works for a short time but is time consuming this is really annoying as i use this for work and study!

Answer:Satellite Pro C850 keyboard wont work properly and opens multiple programs

> is there a permanent fix to this problem?

The question is what causes this problem? Is it hardware related or software related issue?

Why you don?t connect an external USB keyboard just to check if the same would happen?

In case the USB keyboard would work fine, I would assume that the internal keyboard malfunctions? and the solution would be an simple replacement of faulty part.

3 more replies
Relevance 75.44%

I am trying to fix a Satellite L450-181 for a friend.

I have had to replace the hard drive as a friend tried to load Yahoo messenger and when the laptop rebooted a screen came up to say a file was either missing or corrupted but we were unable to access any of the keyboard except the mouse and touchpad.

I replaced the hard drive and reloaded windows 7 64bit from a Microsoft disc as we were unable to find the Toshiba recovery disc. Everything works fine after downloading all required drivers from Toshiba except the entire keyboard. The keyboard shows up in the device manager as working fine with no conflicts but I cannot get any function from the keyboard at all.

I suspect my friend has locked the keyboard in some manner or there is a setting I need to enable but I am at a loss at what to try next as I have reloaded the flash card utility, the vap utility, tried the Fn/ F11 and the Fn/F10 combinations to no avail.

Any help would be gratefully received.

Answer:Keyboard doesn't work on Satellite L450

> Everything works fine after downloading all required drivers from Toshiba except the entire keyboard
Wait a moment. Has keyboard worked after clean OS installation and before you started to install Toshiba drivers?
Can you use keyboard in BIOS mode (arrows to change BIOS options)?

3 more replies
Relevance 75.44%

Hello!

Sorry but my english is not too good

I want to cange the xp, want to Vista, but the keyboard is stupid.
The fn with some buttons isn't work, the fn with some butons always on /if I want to read this button with no fn, need push fn/.
It is very useless.

I read this line without fn button, you will see how it is work:
5 read th5s 35ne w5th64t fn b4tt6n, y64 w533 see h6w 5t 5s w6r2

Please help me.
Thanx for all help

It is an Satellite L30, the vista is enterprise.

Answer:The keyboard and Vista doesn't work on a Satellite L30

Hello

Satellite L30 is Vista supported and if there is no hardware problem Vista should run well on your notebook.

Just one thing I am interesting for: have you keyboard problems using it with original WXP OS? I just hope you writing about internal keyboard and not external.

3 more replies
Relevance 75.44%

Hello,

I have a serious problem with my A60: the keyboard doesn't work any more. I have tried a lot of solutions and the last one, recovery with the Product Recovery DVD-ROM doesn't work, because I can't use the keyboard!!

When the screen with the 3 choices appears, I have no possibility to answer!!
Have somebody an idea???

Thanks a lot for your answer.

Answer:Satellite A60: keyboard doesn't work, recovery DVD can't run

They keyboard might not be the problem or it might not be connected properly to the motherboard the best thing to do is take it to a service centre it shouldn't cost you anything, if it is still under warranty...but if it is just the keyboard and your laptop is out of warranty then it should cost you more than 100-200....can't say how much exactly because I have no idea.

1 more replies
Relevance 75.44%

Hi,

I have a really strange problem. One day suddenly my keyboard stopped working (doesn't matter if in windows or on boot). I thought maybe some how the cable between keyboard and notebook disconnected and opened the keyboard to check this and realized nothing special.
When I started the notebook the keyboard works fine but at this moment I didn't built-in the keyboard again but had it loose connected to the notebook.

So I found out that when the keyboard has NO contact to the notebook (except from the connection cable) it works fine. But when it is built-in (or just placed thereon) it doesn't work (?).

Has somebody a explanation for that problem?

Answer:Keyboard doesn't work on my Satellite L when built-in

I have no explanation for that? i mean only one cable connects the the keyboard to the motherboard. But maybe the cable is broken or the connection is loose if the keyboard is plugged in?

Just an assumption?

3 more replies
Relevance 75.44%

Hello,

I have a Toshiba Satellite 3000-100 Notebook. It worked without any trouble. But suddenly the keyboard doesn't worked! The other buttons are still working. What can I do?

Thanks, homer108 (from Germany)

Answer:Satellite 3000-100: keyboard doesn't work

For me it looks like a keyboard fault.
In such case you will have to replace the old keyboard with the new one.
The replacement is not very difficult. The keyboard is connected to the motherboard with the small, flat cable. To remove the cable from motherboard you will have to open both small latches at the connector?s sides and to lift out the cable.

However, firstly you have to order a compatible keyboard from ASP which is responsible for your country. And if you have no experience with any replacement procedures I would recommend asking the notebook technician for the help.

Best regards

1 more replies
Relevance 75.44%

Hello
I have problem with my keyboard. I install Windows XP from recovery CD and make updates form Windows Update. Sometimes when I write something ex 1234567890, I see on the screen 123567890 or 123456790.
I took the laptop to the service and they said everything is OK, but for me it`s not!!
What is wrong with it, can someone tell me ??
Thanks

Answer:Satellite L10 - keyboard doesn't work correctly

Hi

Compare the BIOS version which is installed on the notebook with the BIOS which is available on the Toshiba page.
If you use the older version so you can try to upgrade the BIOS.
I have read that sometimes a new BIOS could help.

5 more replies
Relevance 75.03%

Hi all.

I?ve Toshiba Satellite L500 with Windows7. Two days ago a red cross appeared over battery indicator and notice: 30% available, plugged in, not charging. Consider replacing your battery.
And when I plug off AC laptop shuts down. I replaced the battery but the same action ? when plug out AC the computer shuts down. Run some antivirus programs ? no results. I installed a battery tester who told me that battery is not installed. Run SCF program ? not bad files.
Tried with power manager ? no results.

My battery works well on other similar laptop.
Pls help !!!

Answer:Battery is not recognized properly on Satellite L500

Hi

Remove the battery and start your notebook with AC power supply only. When the OS is loaded put the battery in place and check if the battery will be recognized.
If not I presume there is some problem with power supply electronic on mainboard and it should be checked by Toshiba service provider.

6 more replies
Relevance 74.62%

I recently bought this P50t a-125 and the backlit keyboard doesn`t work.

I looked in Bios and the "LED illumination" feature is missing (i have bios 1.70),

Also the feature is missing from Desktop Assist.

Thanks in advance for help

Answer:Satellite P50T-A-125 - backlit keyboard doesn`t work

The backlight keyboard feature can be enabled and disabled using the key combination Fn + Z

Did you already try this key combination?

4 more replies
Relevance 74.62%

Hello everyone.

I have Satellite A660-156. Recently put a backlit keyboard (replaced old one without light after liquid damage), but the lights did not work. FN + Z ? no result.

Perhaps there is any utility or driver?
How to get it work?


+Message was edited: posting has been translated+

Answer:Satellite A660 - illumination doesn't work on new keyboard

> I have Satellite A660-156. Recently put a backlit keyboard (replaced old one without light after liquid damage), but the lights did not work. FN + Z ? no result.

Did you connect the new keyboard to the additional connector which controls the backlight?
As far as I know not all Satellite A660 motherboard supports such connector and this means that backlight keyboard is not always supported!

In case the additional connector isn?t available, the backlight keyboard upgrade is not possible.

4 more replies
Relevance 74.62%

My laptop keyboard dosn't work after the windows 8.1 update (11-06-2015) So I cannot login on my laptop.
What can be the problem and more important: How can I solve this problem?

Answer:Satellite P70-A-11N: Keyboard doesn't work after windows 8.1 update

If I understand you right you cannot use keyboard in Windows only.
When you enter BIOS settings, can you use keyboard to move through all available options?

2 more replies
Relevance 74.62%

I installed Windows XP on this laptop. The keyboard *Fn+F8* ( Wireless switch controll) don't work.?
Any idea? Thanks

Answer:Satellite Pro L670-16Z and WinXP - Keyboard Fn+F8 doesn't work

You need some kind of utility to enable the custom Toshiba functions.

Usually in Windows Vista and 7, its the Value Added Package, but for XP you need Common Modules and/or a Wireless Hotkey utility.

XP is being phased out by Microsoft this year, so it may be difficult to find compatible XP drivers for the new Models.


Is there a reason you need XP?
Windows 7 has an "XP Mode" that runs XP inside of Win7 using a virtual machine.
You can use XP Mode to run programs that have problems running in Win7.
http://www.microsoft.com/windows/virtual-pc/download.aspx

4 more replies