Computer Support Forum

Satellite L500-21T - Stop error code when installing Windows 7

Question: Satellite L500-21T - Stop error code when installing Windows 7

Hello

I bought a notebook Satellite L500-21T from saudi arabia.

I lost the hd recovery during trying fix windows 7 installation. If I try to install windows 7 I get stop code 0x0000009c error. If I turn sata to compitibality from AHCI Windows xp sp2 not sp3 installed but most drivers like display and wlan not installed. Trying to update BIOS give that is not suitable for that the phoenix version of bios 1.5

I changed HD and RAM but the same problem. It may the BIOS?

plz help me

Relevance 100%
Preferred Solution: Satellite L500-21T - Stop error code when installing Windows 7

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Satellite L500-21T - Stop error code when installing Windows 7

Hi buddy,

I?m a little bit confused now... Do you want Windows 7 or Windows XP?

If you miss some drivers after XP installation, why do you update the BIOS?

As far as I know Satellite L500 support Windows XP so you can download all missing drivers and tools on official Toshiba website:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

Check this!!!

3 more replies
Relevance 85.69%

Error code: 380381-26-2a037303 when trying to burn to DVD.

Can anyone help?

Answer:Satellite L500-19X - Error code when trying to burn to DVD

Hello

What program you are using for burning disks?
What operating system is installed?
What kind of blank DVDs you use?

To be honest I can?t say something about this and one sentence description is too short in this case.

I would recommend using high quality mediums from Verbatim or TDK. I have good experience with DVD-R mediums instead DVD+R.

4 more replies
Relevance 84.46%

I downloaded "sln0v190.exe" (Phoenix WinPhlash 64) and extracted to a folder and then selected to run the BIOS flash routine.

I get the following error:
"Failed to retrieve system bios information.
BCPSYS block signature not found
Error Code -100"

As I can not read - and save - the old corrupted BIOS I can not flash the new BIOS!

Any ideas please?

Answer:Satellite L500 - BIOS update error code 100

Hi buddy,

Do you update the BIOS with administrator account?
Have you disabled the security software on your computer?
Is Toshiba Value Added Package installed?
What operating system do you use?

But may I ask you why you want to update the BIOS? Do you have any problems with the computer? If not I wouldn?t do this update. As you probably know never touch a running system ;)

1 more replies
Relevance 83.64%

I'm currently on Ubuntu and I want to clean install Windows 10. I downloaded OS from Microsoft site and made USB bootable using Microsoft's USB DVD software.

However, when it starts booting I see windows logo loading and them blue screen flashes with Stop Code : Memory Management erro. Then my laptop restarts.

Please guide me what am I missing here?

Laptop : Dell Inspiron 7559

More replies
Relevance 77.49%

I have a Toshiba Satellite L500 - 1UU with Windows 7 64 bit OS factory Installed... I want to install a 16 bit windows 95 program which works on XP and Vista 32bit versions. I tried the compatibility wizard in windows 7 in Win 95, 98, XP, Vista settings but i get the message " out of memory resources". Is there a way around? Will i get same message if i install 32 Bit windows 7? Theres no drivers for windows vista on the support pages well.. Where will i get the drivers for Vista if theres no way around but to change my OS?

Answer:installing a16 bit windows 95 Program On Tosh Satellite L500 - 1UU

Hi,


Maybe, you should install Vmware with Xp environment to run Win 95 programs or look for Windows 95 emulators in Google

2 more replies
Relevance 73.39%

The DVD_RAM stop working.
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
It is showing drivers cdrom.sys.

How can I find new drivers for UJ-850S?

Answer:Satellite P100-444: DVD-RAM UJ-850S stop working - error Code 39

Hi,

look in the driver download page:
http://eu.computers.toshiba-europe.com
go to Support & Downloads -> Support homepage -> Download drivers

Bye

3 more replies
Relevance 72.98%

Hello Everyone

I have a problem, suddenly, without doing anything, my *FN keys stop working*. First the luminosity adjustment still worked without appearing the bar on the top of the screen, but when I reboot the computer not even that works, nothing related with the FN key works.

My biggest problem is that my computer is a Toshiba Satellite L500-13W and *i can only activate Wireless pressing FN+F8*. I can't stay with this problem much more. I already looked in this forum and in other sites but none of the solutions have solved my problem.
I hope you can help me.

Thanks in Advance.

(Sorry for my bad English) :|

Oh I forgot to say, I am using Windows Vista 32 bit

Answer:Satellite L500-13W - FN Key Stop Working

Try uninstalling and reinstalling the Toshiba Value Added Package.

A BIOS Update may also help/

7 more replies
Relevance 72.57%

Have a Satellite L500 Windows 7 32 bit. Windows Backup on external disk does not (longer) work. Message: Last backup was not successfull. Error message 0x8007002.

Can set restoration/recovery point and can backup from restoration/recovery points, but cannot actively save/backup data on external units with Windows tools. Toshiba Board for "secure your laptop" does not work as well. If possible, do not want to restore the whole OS.

Thanks for your help.

Answer:Satellite L500 - Error in Windows backup

Hey,

To be honest I doubt this issue has something to do with Toshiba?

Have you already checked Google for useful links?
http://igtfy.com/?q=windows+backup+error+0x8007002

I found an answer that cleaning the registry with CCleaner (or another program) worked? It would be worth a try ;)

2 more replies
Relevance 72.16%

I bought my first toshiba laptop last saturday, and i find it wierd that the cooling fan works around 80%(data taken from the software provided: PC Toshiba Monitor Health) all the time i have the laptop on, it never slows or stops...nothing exept full throttle.

It keeps its cool, thats a fact, but its pretty noisy and while surfing the web or working on microsoft office for example, it can be pretty anoying and energy demanding.

Another thing i question is, in a long term, how healthy is the fact of the fan working non-stop at this amount of speed for the laptop? Should i be concerened and maby taking it to be checked by the store i bought it? Or its normal?

Below is a link of a screenshot i took from the numbers i'm talking about:
http://img199.imageshack.us/img199/8391/fansx.jpg


thankx for your help :D

Answer:Satellite L500-19f cooling fan works non-stop

Hello

Try please to reduce it changing cooling method options in Toshiba power settings.
Start > Control Panel > Power settings > Change plan settings > Change advanced power settings > Toshiba Power Saver > Cooling method > change it to ?Battery optimized?.

Maybe this will help you.

1 more replies
Relevance 72.16%

Hello

I have a new Toshiba satellite L500 1XX with i3 and I have installed the 32bit OS.
From the first start the fan is acting strange every 5-10 seconds it start working for 5-10 seconds then stops for 5-10 seconds then start again, that is going on all the time even if the laptop gust stand with out doing anything.
I believe something is wrong but was not able to find it. Please I need help
Thank you

Answer:Re: Satellite L500 - Fan start/stop every 5-10 seconds

hi,

It's ok with your laptop. My satellite A500 also acts like this, even if I surf the Internet, watching movie and CPU shows only 5%. I don't play games at all. It's not because of dust because I clean it regularly, installed all drivers, bios updated. The only way to make it less noisy to run the fan at constant speed like 54%, I just load the CPU with some applications that keeps fan running almost everytime and no annoying noise noticeable.
You can play with power settings in Power plan, but in my case it doesn't help. And don't even decide to upgrade Bios, it doesn't improve you but can ,,kill,, your lap if goes wrong.

Bazlaha, ahi !

9 more replies
Relevance 72.16%

We are trying to image 21 B50-10 notebooks and keep getting the following error 0x00000A5 - BIOS is not compatible with ACPI This happens regardless of if we use Windows Deployment Services or Direct from DVD. Has anyone else had this issue and more importantly been able to resolve it? Cheers, Ozzie

More replies
Relevance 71.34%

Every time I start up,there is a small coloumn type graph with camera icons on it,with TOSHIBA on the top.
It is for photo/video,settings,effect,face recognition.
How do I stop this appearing,as it is annoying the heck out of me because it is permanently overlaid on my webpages.
I can remove it with a right click but I can't tell how to stop it appearing on start up.

Answer:Satellite L500/01U: How to stop camera setting appear on desktop

Run msconfig and untick the startup program you don't want loading.

2 more replies
Relevance 71.34%

Hi!

OS: Windows 7 / 64Bit.

I'm trying to connect my Satellite L500 to A-Link WNAP 802.11n WLAN AP 3G ROUTER via Network adapter (Intel 82567) without succes.

Device manager in General tab indicates "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)". Then I updated driver -> Windows has determined the driver software for your device is up to date. Still same message coming in General tab.

Has anybody same kind of problem?


Sitiper

Answer:Satellite L500-1WG: Network adapter does not work - Code 31

Hi mate

What device doesn?t work correctly? Is it WLan or LAN card?
I?m a little but confused?

As far as I know the notebook support LAN and Wlan card from Realtek.
Therefore you could download both drivers from Realtek page directly.

Please set the BIOS to default settings before you would reinstall the both drivers.

I hope this will help you!

7 more replies
Relevance 70.52%

Hi folks,

I'm running windows 7 on a Toshiba Satellite L500-1XL.

About 6 weeks ago, Windows refused to load.
I'd get the 'Toshiba' screen and then Windows startup splash, but then nothing but a black screen with a (moveable) mouse icon.

i couldn't get into safe mode, and Toshiba's built in recovery utility wouldn't work.
Even using the Toshiba 'Product Recovery" DVD was doing nothing, although the disk was making a few strange and repetitive clicks during that, so I suspected a faulty hard drive. (Possibly where the MBR was OK, but the data wasn't?)

Anyway I put in a replacement HDD (backups are a wonderful thing BTW!) and the recovery DVD loaded perfectly and all seemed well.

About 2 weeks later, I got the same problem
('Toshiba' screen Windows startup splash, but then nothing but a black screen with a (moveable) mouse icon; no safe mode; no recovery utility)

This time, however the Product recovery DVD worked fine first time.

Another 2 weeks go by and the same problem happens again; this time it took another HDD for the recovery media to work.

So my question is really what could be causing this fault?

Could it be a virus which is corrupting something which is preventing Windows from loading? And 'preventing' it so much that I can't even load the recovery utilities?

In which case could it also prevent the Product recovery DVD from loading?


Or am I looking at an intermittent fault with the HDD connector which is either physically d... Read more

Answer:Satellite L500-1XL - Strange Windows 7 Error - Virus Or Hardware fault?

> So my question is really what could be causing this fault?
I doubt it?s a virus or something like that but nothing is impossible.

From my experience the data on the HDD can be affected by different software tools.
In my case the data on the HDD was corrupt because the 3rd party software changed some files and the boot master record has been damaged.
I formatted the HDD and created new partitions.

I also use the CCleaner and I defragment the HDD several times in the week.
Since than the HDD and the data is ok and didn?t notice such symptoms anymore.

Maybe you should try this too?

2 more replies
Relevance 69.7%

Hello, I bought Toshiba L500 in January but I haven't been able to update it with Tempro since May. Towards the end of setup, setup crashes and it says the following in Turkish:

"Hata 1722. Bu Windows Installer paketi ile ilgili bir sorun var. Kurulumun bir par?as? olarak ?al??an program beklendi?i gibi sonlanmad?. Destek sorumlunuza veya paket sat?c?s?na ba?vurun."

If I translate it briefly,

"Error 1722. There is a problem with his Windows Installer package. The program working as a part of the setup didn't finish as expected. Apply your support service or package seller."

I download the Tempro setup file, but whenever I start setup, it always says so. How can I update my laptop?
Thank you for your interest and answers.

Answer:Re: Satellite L500 - Temro issue - Error 1722 Windows Installer package

Hi

If the 1722 error appears then this means that a program run as part of the setup did not finish as expected
Please check the new Tempro version here:
http://eu.computers.toshiba-europe.com/innovation/generic/TEMPRO_W7_RELEASE/

I installed Tempro and is functioned so I assume it?s a problem with your Windows OS.

2 more replies
Relevance 68.47%

I pre-installed my laptop Satellite L500 with Windows Home Premium 64bit for the first time and after installation Windows became 32bit!

Why it become 32bit and how to return it again to 64bit?

Answer:After Pre-installing my Satellite L500 wrong OS version is installed

Can you please post exact notebook model?
Have you installed OS using delivered recovery DVD or what?

Some notebook models are offered with preinstalled 64bit and additional 32bit version on DVD.
Please post exact model name and model number so we can check it.

12 more replies
Relevance 67.24%

Hello Geeks,

I am working on a computer that, when turned on it tries to load the Windows 10 OS and then it comes up with a frowny face and gives me a Stop Code: 0x0000007B which is an INACCESSIBLE_BOOT_DEVICE. So I went through the basic steps going through the Troubleshoot options with no avail. I then tried to recreate the MBR through command prompt and that still didn't do it. I then try to restore old registry files through RegBack in CMD. That did not work either. I'm trying to get the data off and just reinstall the OS from a clean install. I am able to get into Safe Mode with Networking. Also I was talking to the owner and they said that the computer was bought with Windows Vista and then didn't like it and bought Windows 7 and put it on the computer the problem I saw was that the bought the 64-Bit Pro and then when the upgrade came around they Upgraded and Window 10 saw that there was 64-Bit Pro installed so it just went and installed the same. My question is on this part: Can I reinstall the 32-bit version and still maintain the digital entitlement or will I have to have them purchase a new OS?
 

More replies
Relevance 67.24%

Windows 10 stop error code 0x0000007E
System thread exception not handled.
this an intermittent fault ,sometimes the computer will run no problems
and now and again it will stop and come up with
your pc run into problems and needs to restart .We're just collecting info and then we'll restart for you.
much appreciate anyone who can help with this problem
thanks

More replies
Relevance 66.42%

I have a new hard drive for my hp pavilion mx50 and when I put windows 98 on it and then go for the upgrade to windows 2000 I get the following error
***STOP: 0X0000007F (0X00000000,0X00000000,0X000000000,0X00000000)UNEXPECTED_KERNEL_MODE_TRAP

I also get the same error if try to install win2k directly on the drive!
there is no new hardware on the PC just the normal modem,Nick card, CD Roms, floppy drive, sound card,
but what gets me is that i reload windows 98 back on to it and there is no issues?
anyone have any Ideas what I am doing wrong.
 

Answer:STOP Error code for windows 2000

Lots of reading but it's probably in there:
http://www.microsoft.com/resources/...0/server/reskit/en-us/prork/prhd_exe_jadf.asp
 

2 more replies
Relevance 66.42%

my pc sometimes but not always, gives me a stop error code. all was working fine till i ran the updates for windows 10?

Answer:stop error code after update? windows 10

Hi Welcome to Windows Central! What error code does your PC give you some times, but not always! What updates for windows 10?? Are you talking about a BSOD? If you need more help, please join the forum. Here's a MS list of stop error codes!https://msdn.microsoft.com/en-us/lib...(v=vs.85).aspx

1 more replies
Relevance 66.42%

This is a new laptop hat I have been using and I keep getting the windows (10) stop code error at least a dozen times a day. the details of the error are;Stop Code: DRIVER IRQL NOT LESS OR EQUALWhat failed: Netwtw04.sys I have checked for any updates but dont have any to be updated. please sugest any remedy

Answer:X270 Windows 10 Stop Code Error

Please look in Device Manager -> Network Adapters to find the Intel wireless adapter.  Then double-click on it and go to the Driver tab.  What is the version of the driver?

4 more replies
Relevance 66.42%

Hi I have an old computer of my parents. it have important files on it. I tried to help and made thing worse :(
i have xp installed on my computer. my computer was very slow while starting up and my avast antivirus always use to pop up "a virus has been detected in run32.dll". also avast/ virus has blocked many of my adminstrartive tasks. i searched a lot on it. But was not able to get rid of it.
so i manually tried to uninstall avast but it does not allows me do do so saying you dont have adminstrative rights to modify registrty and all that.
After i restarted i was not able to reach the xp logon screen and it reboots again and again. it happened again when i tried to safe boot, previous best settings and other f8 commands. then i found a blue screen once which gives stop code 0x00000007B (0xf99a4524,0xc0000034,0x00000000,0x00000000).

I want to back up files on my computer. and delete that virus but how can i make my computer normal again.

please help me.

Answer:windows xp crashes gives stop code error

umm... I'm not perfectly sure about this but if avast said a virus was in the run32.dll it could mean either, its a virus masquerading as the run32.dll or something horribly wrong happened to you registry.

I think information can still be accessed if it was hooked up through another hard drive. Basically a hard-drive with an OS installed on it can access another hard drive that is hooked up to the same motherboard. So if you have two hard drives and both had OS's on them, one hard drive's OS could access the other hard drive's information. There can be issues, but more than likely it will work.

Be wary that if your hard drive is affected by a virus I would make sure to have virus protection on whatever is opening the infected hard drive up. Namely the other hard-drive's OS.

That is all that I can think of to "fix" your situation. It doesn't necessarily fix the hard drive is infected and not working problem, but it fixes the getting important information off the infected hard drive problem.

Hopefully this helps, and hopefully some other forum member may have a better solution.

Good luck.

5 more replies
Relevance 65.6%

Hello, I got a BSOD when my computer was almost idle (only utorrent was running) with stop error code 0x000000F4.
Also at the blue screen it got stuck at the 2nd step (don't remember what it says) and as a result I don't have a minidump file.
My pc specs are:
Motherboard: ASUS Rampage III Extreme
CPU: Intel i7 - 950 @ 3,00GHz
RAM: 3x2GB @ 1866MHz
Windows Drive: 60GB SSD (OCZ Agility)
OS: Windows 7 Ultimate Sp1 64bit
This has happened quite a few times during the 1 year I have this computer. The previous times the SSD I had (Corsair F60) stopped working. (2 SSDs dead)
The problem is that I cannot reproduce the problem so that we find out the cause. Is it something with the controller of the motherboard? What should I do?
 
Thank you for your time!

More replies
Relevance 65.6%

hi everyone.i found this site through google and while checking ur forums i found u ppl really helping. below i'm stating my problem hope u guys will help me.

my system specification:

mb : asus a8nvm
processor : amd 3500 + 939 (athlon) 64 bit
hdd : seagate 500gb
ram : 512 x 4 (ddr 400, 1 zion,3 strontium)
graphics card : nvidia 6600 gt (128mb)
smps : i-ball 400w
os : windows 7
monitor : acer al1515

mb,processor,zion ram,smps purchased on june 2006, 3 strontium ram on 2009

problem :

since last week i'm getting a bluescreen while working in windows 7.after reboot i'm getting the following msg.

problem signature:
problem event name: bluescreen
os version: 6.1.7100.2.0.0.256.1
locale id: 1033

additional information about the problem:
bccode: 1000007e
bcp1: c0000005
bcp2: 00000001
bcp3: 8fbe5c10
bcp4: 8fbe57f0
os version: 6_1_7100
service pack: 0_0
product: 256_1

files that help describe the problem:
c:\windows\minidump\111309-15453-01.dmp
c:\users\sayantan\appdata\local\temp\wer-25078-0.sysdata.xml

read our privacy statement online:
<link subpressed>

if the online privacy statement is not available, please read our privacy statement offline:
c:\windows\system32\en-us\erofflps.txt

i'm getting dis on an avg after 20 mins. suddenly it showing the bluescreen the in bottom part there is a error msg sayng "dumpin... Read more

Answer:Bluescreen, error code: STOP: 0X0000007E , Windows 7

last night i got my mb's window 7 chipset driver. if anyone finds any newer version than this two please provide the link.

us(dot)download(dot)nvidia(dot)com/Windows/nForce/15.49/15.49_nforce_winvista_win7_32bit_international_whql.exe

us(dot)download(dot)nvidia(dot)com/Windows/nForce/15.49/15.49_nforce_winvista_win7_64bit_international_whql.exe
 

1 more replies
Relevance 64.37%

Hi. I tried Ubuntu 8.10 out as an experiment, and while the OS is great, I need access to Excel for some of the more advanced work I do. So I figured so problem I'll just switch back. I've done that 100 times. However when I went to install Windows I get to the point in the installer when it is still the blue screen and says Setup is Starting Windows. At this point I get a BSOD that says STOP: 0x0000008e (0xC0000006, 0xF7411B18, 0xFX022A18, 0x00000000)
setupdd.sys - Address F7411B18 base at F73F2000, Date Stamp 3d6dd67f

Now I've done a memtest which came up fine for both my sticks. I've formatted the HD to NTFS and tried that. Then to unformatted and tried that. Same Errors. I've flashed the BIOS while keeping DMI data. I've removed everything but the HD, 2 cd rom drives, and video card. I'm not sure what to try next to get this to work. If anyone has any idea please post.

Specs
Mobo: GigaByte GA-EP35C-DS3R
Processor: Intel E8400
GFX: MSI Nvidia N9600GT
HD: Sata Seagate 250GB
CD-Rom Drives: IDE Dvd Reader and Dvd Writer

Any Help would be greatly appreciated.

Answer:Stop Error When Installing Windows XP Pro

hi, you can use open office in Ubuntu, anyway make sure that CD doesn't have any scratches and dirt. Like you mentioned you have restes bios.
Is it possible if you can try another hard drive, my recommendation is to download a live cd such as bartpe or ultimate boot cd, then use this live cd to format the machine. I think there is a corruption in MBR.

Also access recovery console if possible and try
chkdsk c: /r
and try /p
fixboot

If your BIOS permits this can you check to see if you can disable bios caching.
This problem can also be RAM issue, so open pc case with all power disconnected, reseat RAM or try another DIMM slot press it and hear the click.

Change jumper setting in CD drive if it is cable select then change to MASTer, because there aren't any other devices connected to this channel it will not affect them.

7 more replies
Relevance 64.37%

Ok, so I recently installed windows 7 ultimate 64bit on my computer. Previously before this my friend put the 32 bit version of 7 on it, but I changed it to 64 because I had been using vista 64bit beforehand. For whatever reason, one of my graphics cards is giving men a code 10 error. It worked fine in vista, but the problem started when I put 7 on my computer.br says the drivers are up to date, but Ive tried to install them anyways as well as deleting the driver files and then reinstalled from nothing. Similarly, im getting a code 10 from two other devices, but for some reason they aren't listed as an unidentified device or something like that. I have no idea what's causing this, but I'm lost and I need help.

Answer:Code 10 error after installing windows 7

http://pcsupport.about.com/od/findb...http://support.microsoft.com/kb/943104you may have to download and clean your system with a driver cleaner, and then reinstall, are your issues due to an incompatability with win7 x64, run the compat test from mshttp://www.microsoft.com/windows/wi...i hate computers!but cant help myself....

7 more replies
Relevance 64.37%

hi I get an error code 0x80070037 when trying to installing windows 7 any ideas? I used another windows disc still get the error help

Answer:help getting error code when installing windows 7

There's some sort of hardware issue occurring. The error means that the device (i.e. storage device) is no longer available. Is this a new system or hard drive? You may want to try disconnecting the hard drive power/data cables from both motherboard and drive ends and reconnect them.

Also it might happen if your motherboard or whatever RAID card you have installed needs drivers to read storage drives connected too it. To do that you will need to have a USB available with the drivers or have them slipstreamed on the Windows 7 disc, then when setting up drive to install Windows click the "Load drivers" button and find and load them from there.

1 more replies
Relevance 63.55%

Hi, just downloaded the newest BIOS update but there is an error coming up everytime I try to update it..... "uefi winflash bios above 210 battery 10% ac attached"

Ac connected and battery not charging but tried to leave and remove it too. Current bios 1.60
I tried to find a BIOS flash utility but none helped. BIOS defaults loaded and tried in safe mode too.

Any suggestions?

Answer:Satellite L500-1XC - Error when updating the BIOS

anyone?

4 more replies
Relevance 63.55%

I have a Satellite L500-202 Toshiba Laptop.
I wanted to reinstall Win 7 on on it, but i can not install it and display a error Bios.

In setup setting display a ! in front of HDD.
What is problem?

Best Regards
Abbas

Answer:Re: Satellite L500-202 - Bios Error - ! in front of HDD

Hi

Please try to set the BIOS to default using F9 button in BIOS.
To access the BIOS press F2 immediately after notebook has powered up.
Then press f9 and save the changes?

I recommend testing the HDD as well.... use a tool called "Drive Fitnes Test" for that...

5 more replies
Relevance 63.55%

I've just boupght a Satellite L500 and have installed some of the software from my old laptop. Whenever I boot up I noew get an error message telling me that I need NET. framework version 2. I've tried downloading this from the Microsft site but my laptop tells me a newer version is already installed.

Can anyone tell me how to get rid of this error message?

Answer:NET Framework error message on Satellite L500

Hi

What to say? seems the old installed software needs framework 2.
Possibly it?s not compatible with newer framework?

Maybe you should remove the installed framework from the system firstly.
Then after new reboot and registry cleaning (using CCleaner for example) you could install framework 2 again?

Good luck

2 more replies
Relevance 63.55%

When I startup I get an error message "An error occurred. Error # -5".
The message invites me to "Visit http://consumer.installshield.com for more information."

I have visited the website but have not been able to find the error message mentioned and I am directed to my software supplier for a solution. Can anyone give me help to identify the error? At this stage I can say that this error message does not appear when I load Windows 7 on my Desktop Computer.

ronswold

Answer:Satellite L500 - Error message on starting

There was the user with the same error ,, "An error occurred. Error # -5,,. It's Installshield update informer that is not important, you can just remove it from autostartup in msconfig. It won't appear anymore

7 more replies
Relevance 63.55%

Hi,

My L500 fan is no longer working correctly

I am getting this message

Warning:a problem with the cooling system has been detected. please turn off the computer immediately, and return it for service.

The fan runs inconsistently (always for a few seconds on start-up, very sporadically the rest of the time, but it is completely stationary for the most part.

The computer is currently in pieces, and I am ready to replace the fan with a new one, however im not sure that will fix the problem (as the fan still seems to sometimes run).

Thread Name - 'My Toshiba Satellite l500 cooling fan has stopped working'
This closed thread had a post at the bottom by kristain, has anyone else encountered and resolved something along these lines

Please excuse the lack of link/PM (new member restrictions)
 

Answer:Toshiba Satellite l500 cooling error

Are you going to replace the fan or the entire cooling heatsink and fan? Was the heatsink clogged with dust? Keep in mind, this also may be a motherboard issue
 

1 more replies
Relevance 63.55%

Hello, today i was updating my drivers and when i started on my bios it crashed while it was updating. After waitting for a long time and seeing the computer crashed, i turned it off. Surprise surprise, when i turn it on i only see a black screen. Isn't there any way to reset my bios drivers? And if i have to send it to a support center, will they format my disc?

Thanks in advance

Bruno Fernandes

Answer:Satellite L500-1TU - BIOS update error

Hi,

> Isn't there any way to reset my bios drivers? And if i have to send it to a support center, will they format my disc?

There is no relation between Bios and hard drive. They will reflash your Bios, all data on you hard drive will be untouched. But you should know that Bios reflash is not free procedure, you will have to pay.

5 more replies
Relevance 63.55%

I am trying to delete the original partitions on my T400 so that I can install Windows XP.  I have booted from a CD and as Windows XP loads I get the above error.  I have disable shadowing, changed the HD to compatibility, core multi-processing is also disabled.  Any ideas?













Solved!

Go to Solution.

Answer:STOP: 0x0000007E pci.sys error when installing Windows XP

rlucero welcome to the forums Are you using the recovery cds to install xp?or using an xp setup disk.If you are using an xp setup disk follow this link.the information given there has similar known issues during installation routine  http://support.microsoft.com/kb/891892 

6 more replies
Relevance 63.55%

I've seen a lot of threads about Error code: 0x80070570 here, but none of the solutions works for me.

I posted on /r/techsupport earlier today:

https://www.reddit.com/r/techsupport...boot_from_usb/

Where I had trouble getting into the windows installer. I managed to get the installer going, but now I am getting an error message during the installation:

https://gyazo.com/cc6818f7667da1c11a66f360a712a0d3
Error code: 0x80070570

This happened after I formatted my drives; during the installation. I've tried to take out my RAM 1 by 1, but with no luck.
Running Windows 7 Ultimate x64 on a self-built desktop computer. Installing Windows 7 Ultimate x64 with a Kingston USB-stick "burned" with Rufus. This is the ISO I am using:

Download Official ISO's of Windows 7, Windows 8.1 or Windows 10 legally and for free - TechFleece

I have no access to a different Windows computer, only a MacBook Pro Retina. Nor do I have a different USB-stick or drive, so solutions which no not require any of this is appreciated. I am not the most computer savvy guy either, so keeping it simple would be nice

Thanks in advance!

More replies
Relevance 63.55%

Switching a Logitech BN52 media keyboard from an old PC. Downloaded 64 bit Setpoint for windows 7 but all I'm getting in device manager is code 28 no drivers installed.
It has recognised the keyboard ,but keeps showing this error.I have installed uninstalled disabled kaspersky everything i can think of .
Anyone able to help?
thanks
 

Answer:Error code 28 when installing keyboard on Windows 7 64 bit

If it's a PS/2 connector turn your PC off before disconnecting/connecting your keyboard.

Often Windows Update fixes this... but this is a software issue now...
 

1 more replies
Relevance 63.55%

Hi, I'm trying to fix my brother's Dell Inspiron N5030 because he couldn't get windows to boot after running startup repair several times.

So I made a WIN 7 bootable USB using Wintoflash, booted the usb, and ran the startup repair utility 2-3 times with no luck. Then I tried to re-install windows. When I selected his primary hard drive it had a yellow triangle by it and it said something like "drive may fail soon." I went ahead and tried the install anyway and at 5% it stopped and I received error code 0x8007045D. So I ran chkdsk, and it deleted many corrupted files, but i still get the same error code when installing.

I don't believe this error is the fault of the installer because I used the same iso, program, and flash drive to re-install windows on my laptop (which is the same exact model) without any issue. Also, after a little prodding, I found out that his laptop had a fairly hard fall right around the time that it stopped booting windows. So, after all this, I'm pretty sure the culprit is his hardrive. My question is: how can I be sure of this?

One thing to note: he had his current hard drive installed aftermarket because his original hard drive failed.

Answer:Error code 0x8007045D when re-installing Windows 7

Boot into BIOS setup to see if HD is detected. If not try reinstalling, check contacts, replace if necessary.

Unplug all other HD's and peripherals,

Boot into BIOS setup, reset to defaults, save changes. (If an EFI BIOS you'll need to decide if you want UEFI BIOS vs. Legacy BIOS. If UEFI follow these special steps for Install, otherwise enable Legacy BIOS or Compatibility Support Module to proceed with normal install.) Set DVD drive first to boot, HD second, set SATA controller to AHCI, Save changes and Exit.

Then boot into Windows 7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here.

At first installer screen Press Shift + F10, or enter System Recovery Options to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt. You are creating the partition here for the purpose of wiping the HD and marking Active which... Read more

1 more replies
Relevance 63.55%

Please help me..I am getting error code 0xC0000005 while installing fresh copy of windows 8.1 x64When the installation process arrives at 87% every time I get the error code saying that installation can not be done.I can not install windows 8.1 x64 version on my laptop.please tell me how to solve the problem and install windows 8.1 x64 version on my laptop.I tried with dvd-rom and usb as well, but the result is same..just stuck at 87%...can not be installed....how to overcome it...please...













Solved!

View Solution.

Answer:Getting error code 0xC0000005 while installing windows 8.1 x...

@Achintya-only, Since the hardware all passed, and it would install a different version of windows without trouble, I would suspect a problem with the Windows 8.1 x64 installation disk. IT may be a good idea to contact Microsoft about this issue. I did a bit of searching and found this on the Mcrosoft equivalent of this board.Windows 8.1 Pro (Retail) Installation Fails At Beginning Of Stage 2 With Error Code: 0xC0000005 - answers.microsoft.comThere are some suggestions on this post that you can try. I hope this helps. 

6 more replies
Relevance 63.55%

ok, my computer hardrive went crazy the other day, so i wiped it, repartitioned it, formatted it, and put in my xp pro disk. everything goes good untill the "copying files" section. Some files cant be copied so all i can do is skip them. then when thats finished. it goes to the installation process. it starts then gives me an error code. "setup was unable to initilize network installation componets. specific error code 2.
someone please help, its my good computer, im currently using my old one with 20 gig hardrive 500 mb ram and 2.1 ghz speed on processor. help please!!!

Answer:specific error code 2 when installing windows xp pro

Hello bbackz

I think you should check your RAM

If you have more than one stick of RAM (256MB or more) swap them over or take one out and try again with only stick #1. If it does not help or makes things worse swap the sticks and try again with only stick #2. Running with one stick at a time will identify if you have a bad stick. Try moving the RAM to a different slot as well.

OR
You can put either of these free programs on a floppy and test the RAM. Let them run for hours to do many passes if you can

memtest86
http://www.memtest86.com/

Windows Memory Diagnostic http://oca.microsoft.com/en/windiag.asp

Memtest on CD ( this is a bootable CD and can be used when you cannot access an operating system)
http://www.techpowerup.com/downloads/256/mirrors.php

Use your CD burner to write it onto a CD as an ISO image

Test with only one stick of RAM installed at a time

.

3 more replies
Relevance 63.55%

lately Iv'e been having trouble booting my windows 7 and decided that it's time to upgrade, I bought a copy ofr windows 8 64-bit from microsoft and burned it onto a disk using the windows 7 usb/dvd downloader. I was doing all this from a 32-bit and thus applied the bootsect.exe as needed. When i boot from the disk, everything runs smoothly. I insert the required code and select custom install.

At this point, i select the partitiion and proceed. as the installation proceeeds, it does not apear if the first phase of installation does anything, even after 5 minutes it stays at 0%. after it finaly switches to the next part, I wait again for the next phase, but it only throws up a message "windows cannot install required files. make sure all files required for installation are available, and restart the installation. error code 0x8007048F"

After multiple attempts I decided to reinstall windows 7, but now I get the same error.

Please help!
 

Answer:Error code 0x8007048F when installing windows 8

16 more replies
Relevance 63.55%

I get error code 8007057 when installing windows 10 on my aspire x3910 desktop. Microsoft support can't help me.

Answer:I get error code 8007057 when installing windows 1...

Are you doing the upgrade? if so, check if your drivers are updated.

6 more replies
Relevance 63.55%

I get error code 8007057 when installing windows 10 on my aspire x3910 desktop. Microsoft support can't help me.

Answer:I get error code 8007057 when installing windows 1...

Are you doing the upgrade? if so, check if your drivers are updated.

6 more replies
Relevance 63.55%

Hi,I have bit of a problem , I have the following pc which I bought 3 yrs ago , so I suppose relatively old Compaq Presario SR2125UK Desktop PC Its running 2gb of mem , 140 GB , duo core intel proscessor ( I cant remember the exact speed - i suffer dyscalculia but I bought this when duo core pretty much just came out ( I can try to find out and amend later if I can get back in safe mode again ) in march 07 here in the uk from pcworld with Windows preinstalled.To recall how this happened is TBH akward as this has been recurring issue for some time that I managed to sort of deal with, with antivirus software , but never truly sorted until it started getting out of hand ( fan whirling all the time ) about 3 wks ago.At the time I thought it was just a bad virus that had somehow got in there ,so I tired various antivirus software like kapersky , spybot which helped up to point ( at least speed it up / stop the fan buzzing ) but for some reason it never truly fixed the issue either.This actually started to happen ,or get considerably worse ) if I recall every time I attempted a Microsoft update so as result I ended up ingoring them altogher as I kept having to a system restore ( these updates just slowed down my pc sometimes worse than a virus itself )Last night then I attempted to sort this ,using software I bought called Paragon disc manager . My idea was to just formart it ( thinking it would delete / replace anything else in there causing problems) and then using restore disc, ... Read more

Answer:Error code:0x80070002 When Installing Windows ?

Where did you store the recovery file?Was it on the same drive as your op system?Was it on the same drive different partition?

5 more replies
Relevance 63.55%

I need help with this error code every time I run my laptop i get this blue screen and I don't know what to do. I researched online and some said something about a DVD which I don't have so can anyone help please!?

More replies
Relevance 63.55%

I did download the iso that i got from Microsoft Moderator and it was Home premium 64 bit, did burn whith 2x whith imgburn and verify succefully then i did put it inside my pc and got that error on expanding fils 0%. Im using a Hp pavillion p6310sc . I had when i bought computer Home premium 64 bit but i tryed my friends 32 bit ultimate before but now i tried that too and gets same error. I got this issues while my computer did frezze and waited like 30 minutes then restarted pc and got something windows cannot boot so i did do the repair automatically for 12 hours and did not happend anything so did turn off pc, I tryed system recovery was on 0% for about 12 hours but when we did install 32 bit utlimate we did by mistake format the recovery harddisk so i dont have it on the hdd anymore. I have even formated the hdd whith diskpart clean all so its nothing on it but stills error and no install. Im writing this on a ipad and have not have my pc for 4 weeks so i pray and hope we can fix this pc because right now i have only economy for a hdd ans maybe cd rom but not a new computer. Please hope my pc will work, I have gotten a new error now when removing 2 gb of ram. Error code: 0x800703EE

Answer:Error code: 0x8007048F while installing 64 bit/32 bit Windows 7

Check in BIOS setup if you have an EFI BIOS. Is there an EFI Boot disk in BIOS boot order? If so remove it and set DVD drive to boot first. Look for another setting for Legacy BIOS to enable. Then wipe the HD with Clean command again and try install.

If no EFI BIOS, reset the BIOS to defaults, set SATA controller at AHCI to try install. Unplug all other HD's and peripherals.

Test your RAM - Test with Memtest86+ for 5-6 passes. Test your HD with maker's HD Diagnostic extended CD scan.

Will the disk boot on another PC and see it's HD to prepare for install? If not start over with a new official ISO burned to disk or written to flash stick using Steps 1 and 2 in Clean Reinstall - Factory OEM Windows 7

1 more replies
Relevance 63.55%

I have a new Toshiba L550 1C8 computer with Windows 7 64-bit.

The problem is, that I can?t burn my files on my preinstalled PIONEER DVD-RW DVRTD09A DVD-drive !

If I right-click the file and choose ?Send to E:DVD-drive? I got the error code 0X8007045D.

If I use the preinstalled Toshiba Disc Creator I got the error code 380136-24-00000000.

What?s wrong.


Ole.

Answer:Satellite L550-1C8: error code 0X8007045D and error code 380136-24-00000000

Hi,

Try removing the upper and lower filters to restore functionality.

Instructions: http://support.microsoft.com/kb/982116

2 more replies
Relevance 63.14%

I bought a brand new Satellite Pro L500 Dual Core Windows 7 PC. When I turned it on for the first time, it asked me a few questions and started configuring windows and then came back with an error message. Toshiba Recovery Wizard <Error> ERROR: F3-FF00-0006. Failed to get the ID of the specified partition. Please press [OK] to turn off the computer. I tried pressing 0 (zero) and then turning it on but no joy.

Answer:Satellite Pro L500 - Error F3-FF00-0006 on startup

Google has many hits on "ERROR: F3-FF00-0006" . The solution looks to be on the TOSHIBA Technical Support Bulletins at [Error code displays "F3-FF00-0006" on Windows 7 models|http://209.167.114.38/support/techsupport/tsbs/all/-TSB001522.htm]

2 more replies
Relevance 63.14%

Hi, my Satellite L500 is showing this error message, F3-F100-0004.
Anyone can help on what this is?
Any help much appreciated. Thanks.

Answer:Satellite L500 - error message F3-F100-0004

Hey,

When do you receive this error message?

Can you post a screenshot?

2 more replies
Relevance 63.14%

Hello

I have a Satellite L500-12Q laptop. I used the Recovery Disc Creator to make the recovery discs. It needs 4 discs. The 1st was writtenk ok, but on the second, near the end of the progress, it stopped advancing. It is almost an hour, and it is still not finished. I am on the second try. The disc is spinning and the drive makes noise as if it were writing, but it doesn't advance at all.

Please, could you help me?

Thanks
Claudiu

Answer:Satellite L500-12Q Recovery Disc Creator Error

Hey Claudiu,

What kind of DVD you are using to create the Toshiba recovery disks? I did also had some problems to create a recovery disk but I changed the media from DVD+R to DVD-R and all was ok!!! I used Verbatim disks for creating because I have really good experience with this kind of disks. Furthermore it seems that TDK disks also work pretty well. Check this!!!

If it doesn?t work check the Toshiba page for a firmware update of your ODD!

1 more replies
Relevance 63.14%

Hi,

So last night I went to reformat my laptop, halfway through I thought nah I don't wanna do this anymore so I clicked cancel. Now whenever I try to turn on my laptop, it just gives me the ERROR saying F3-F200-0002 and won't startup. I have tried pressing F8 on startup, but there is no option for recovery or repair in the menu, just safe mode, debugging mode etc.

I was browsing the forums and found out I should press 0 constantly while the laptop is booting and it will bring up the recovery wizard. Anyway, when I do this it says HDD recovery mode then it says Windows is loading files, then it goes to a page saying ERROR F3-FF00-0006.

I have been told to download this file (http://209.167.114.38/support/techsupport/tsbs/all/-TSB001522.htm) but I don't know how to make it work on my laptop that is broken (I'm on my nans computer at the moment). I have tried putting it onto a USB and slotting the USB in, but it won't work.

I need help urgently as I use my laptop for my job (I work from home, using the laptop). It would be alot to mean if you could help me fix it from home, as I do not have money at the moment to be able to purchase a recovery disk or send the computer shop for a professional to fix.


P.S I am on Windows7 and my laptop is a Toshiba Satellite Pro L500.

Answer:Satellite Pro L500 - F3-F200-0002 ERROR on STARTUP

As far as I know recovery installation should not be interrupted. If you do this you will not have access to recovery wizard anymore. All you can do now is to install recovery image using recovery DVD.

Have you created one? If not you can order it under https://backupmedia.toshiba.eu/landing.aspx

Other way you can try to install own OS version if you have original Microsoft installation disc.
You know, the whole situation is pretty complicated now.

By the way: in one other posting with similar problem description some people wrote that this error message can be caused by damaged HDD. I cannot confirm this but everything is possible.

2 more replies
Relevance 63.14%

So I'm attempting to reinstall Windows XP Home on a computer I just built from existing drives and a new motherboard/cpu. I got to the windows setup screen and after about three minutes it gave me a blue screen of death. It told me to restart the computer and try again and see if it works the second time. I got the same message the second time:

A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disc space. If a driver is identified in the stop message, disable the driver or check with manufacturer for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press f8 to select advanced startup options, and then select safe mode.
Technical information: ***STOP: 0x0000007E (0xc0000005, 0xF748E0BF, 0xF78DA208, 0xF78D9F08)***
pci.sys - Address F74E0BF base at F7487000, DateStamp 3b7d855c


The part about adequate disc space rings a bell as my C:/ partition (where I had windows installed before) was running low before my computer died. But I don't know how to fix that now; is there a way to wipe the C:/ drive before I try to install Windows? Right now I just started the disc wit... Read more

Answer:Problems installing Windows XP (STOP error 0x0000007E)

Do a google for killdisk. This will wipe the drive clean. You have
remnants of the old os install lingering causing you problems....

19 more replies
Relevance 62.73%

Hi! I got errors 80070BC9 and C355 when trying to install SP1, security updates KB2478661 and KB2556352 and Internet Explorer 9 with Windows Update. I use Windows 7 Professional x64. I tried to install the updates manually, used the Windows Update Readyness and FixIt tools, and to reinstall the Windows Update agent from the command line as administrator with the /wuforce option. Nothing worked. I uploaded the checksur.log. Can you fix this please?

Answer:Windows Update error when installing SP1 code 80070BC9

Magnusmaster,

* First & foremost I recommend you only do a few updates at a time.
Set Windows to notify you of updates but YOU choose which to do & when.

* Certain Security software can cause updating issues.
To find out if 3rd party software is causing the updates to fail to install > configure the system to Clean boot and then check for updates.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

* You could also try resetting Windows Update Components.
To do this:
1. Click on the following link: How do I reset Windows Update components?
2. Click Run in the File Download dialog box, and then follow the steps in the Fix it wizard.

* Instead of using Windows Update try the SP1 Download:

Download Details - Microsoft Download Center - Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)

For 32-Bit Windows 7 download: windows6.1-KB976932-X86.exe

For 64-Bit Windows 7 download: windows6.1-KB976932-X64.exe

* Windows 7 - Service Pack 1 – How to install Step by Step
How to install Windows 7 Service Pack 1 – Step by Step

* Email support via Microsoft Tech.
Microsoft Support

9 more replies
Relevance 62.73%

I have a Gateway laptop M series that I upgraded to Win7 a few years back (o.g. Vista) has run beautifully ever sense. Recently installed Win8 fresh. Error code OxcOOOOOe9 became the issue. Start up repair was performed several times with no resolve. Used cmd to perform MBR fixes including fix mbr, bootrec.exc, and other fixes found on this site. Nothing seems to resolve the issue. I gave up and was about to call it quits, under the assumption the hdd was gone. One day I decided to throw a fresh copy of Ubuntu on it for laughs ( I am currently getting my certs in networking and linux+) it works flawlessly. Strange to me although I understand there is a difference with grub and mbr. If there are any suggestions, I would be most thankful.

I should add that I am now just trying to reinstall 7. I have played with 8 on a different PC and would rather stick with the former.

Answer:Error code OxcOOOOOOe9 installing any version of Windows

I am thinking of doing another install of Linux and forgetting it.

3 more replies
Relevance 62.73%

Custom built my own computer back in May, and everything was working fine, then one day, updates kept failing and failing. I've gone through lots of Microsoft support pages but didn't find anything. I am running Windows 7 Home Premium 64-bit, verified. The OS is loaded on a Kingston v300 240gb ssd if that matters.

What happens is I go to shut down, and it will bring up the updates screen. 1 of 24, 2 of 24, and then it jumps to 14 of 24, then jumps to 24, then shuts down. The error code (after going into the manual updates and seeing why they failed) was 800B0100. Any way to fix this or am I gonna have to re-install the OS?

Answer:Windows updates not installing, error code 800B0100

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

1 more replies
Relevance 62.73%

I have been trying to install updates on a new setup Lenovo Thinkcentre with Windows 7 Pro 64-bit. All updates were successful except for Internet Explorer 10 for Windows 7 for x64-based Systems. This update gives error 9C59. I have tried a number of fixes, some related to .net, as some of the error information pointed me in that direction. I have tried the Microsoft fix-it for update problems to no avail.

Again, the error code in Windows Update is 9C59.

I am attaching two CBS zipped files, as my original would not upload, and I was thinking it might have been too big, being over the 10Mb limit. The files are CBS-1.zip and CBS-2.zip. The second file (CBS-2.zip) has three of the .cab files in it, all the text files are in the first zip.

Answer:Update error code 9C59 when installing IE 10 for Windows 7 x64

CheckSUR seems to have found no problems - neither did SFC.
However, there are the following errors in the CBS.log file...

Code:
Line 69083: 2013-10-16 14:13:45, Error CBS Failed to shred identity: Microsoft-Windows-InternetExplorer-LanguagePack [HRESULT = 0x80070057 - E_INVALIDARG]
Line 143042: 2013-10-16 14:16:07, Error CSI [email protected]/10/16:20:16:07.314 (F) d:\win7sp1_gdr\base\wcp\componentstore\csd_winners.cpp(1302): Error 80092004 [Warning,Facility=FACILITY_NTSSPI,Code=8196 (0x2004)] originated in function CCSDirectTransaction::AddImplicationsToCatalogsAndVerifyComponentHashes expression: (null)
Line 143044: 2013-10-16 14:16:09, Error CSI 00000450 (F) 80092004 [Warning,Facility=FACILITY_NTSSPI,Code=8196 (0x2004)] #7392670# from CCSDirectTransaction::PrepareForCommit(...)[gle=0x90092004]
Line 143045: 2013-10-16 14:16:09, Error CSI 00000451 (F) 80092004 [Warning,Facility=FACILITY_NTSSPI,Code=8196 (0x2004)] #7392669# from CCSDirectTransaction::ExamineTransaction(...)[gle=0x90092004]
Line 143046: 2013-10-16 14:16:09, Error CSI 00000452 (F) 80092004 [Warning,Facility=FACILITY_NTSSPI,Code=8196 (0x2004)] #7392668# from CCSDirectTransaction_IRtlTransaction::ExamineTransaction(...)[gle=0x90092004]
Line 143047: 2013-10-16 14:16:09, Error CSI 00000453 (F) CRYPT_E_NOT_FOUND #7392420# from Windows::COM::CPendingTransaction::IStorePendingTransaction_Analyze(..... Read more

3 more replies
Relevance 62.73%

Pleas someone help me before i throw my new samsung notebook up the wall.
Just bought this with windows7 pre installed but i cannot install minitab 15 and get th error code 1722 then the istallation rolls back and removes what it had done. I have googled this and it seems to be a common problem with the windows installer when you install MSI programmes. Phoned Samsung who's Tech DPT said and i quote "I dont think this is anything to do with us i suggest you google it" and i also phones microsoft who woant to charge for the service as it was samsung who installed it. Please help i have tried many thing from google but no joy, has anyone els had this problem?

Answer:Error code 1722 while installing MSI programme on Windows 7 Help!!!

Hi and welcome

Error 1722 is an InstallShield error code. It indicates that the installation process has failed. The exact reason for this error is not known at this time.


source: Error 1722. There is a problem with this Windows Installer package.

9 more replies
Relevance 62.32%

well i was trying to reinstall vista with the recovery cd/dvd that i ordered. i tried both versions 32 and 64bit on the disc, but whenever it reaches a certain point on disc2 (copying some .swm file 7/9), the error 'copy of splitpart or CRCs failed!' pops up.
i googled about CRC errors, but i think i can rule out most of those things like cable, scratches on the disc, loose connections a.s.o. unless it's something related to hdd.... but i could install non-oem vista without any probs, so not sure if it's really hdd related.
i hope someone can help me out here.

Message was edited by: babtong

Answer:Satellite L500 - ERROR= copy of splitpart or CRCs failed!

Hmm? maybe you should format the HDD firstly???
Erase all the partitions from the HDD? format everything and try again the recovery disk? maybe some early partitions tables affect the installation?

Otherwise there is something wrong with the Recovery disk and maybe you should order a replacement?

2 more replies
Relevance 62.32%

hey,

For two week, I had a problem my Laptop freezes randomly for a few seconds, but I didn't care. Now, when I start a strange message appear, it was like : "save your files ,hard drive failure, you have to replace it"

Help me please.

Answer:Satellite L500-131 - Error message: Hard drive failure

Hi jiraiya_senpai,

> Help me please.
And what should we help you?

I think the error message says everything and you have to replace the HDD because something is causing this problem.

Is your notebook under warranty? If yes just contact an authorized service provider in your country and ask for help. The technicians can repair this for free.

7 more replies
Relevance 62.32%

Hi. New user to the forum and new owner of a Toshiba.

I am trying to create the 4 recovery discs for my Toshiba satellite L500-12E. Discs 1, 2 & 4 created successfully, but disc 3 failed two times. The message I received onscreen was: Failed to read the following file: F:backslash ZZImg backslash 09753xsp6.swm Error Code: 020150-20-00000000
( I cannot get the computer to type a backslash on this window)

Anyone know of a similar problem or a solution?

Dwight

Answer:Satellite L500-12E - Error during creating Toshiba recovery disk

Hi Dwight,

Which disks you are using for creating Toshiba recovery disk?

I have good experience with Verbatim DVD-R. Have you tested these disks?

2 more replies
Relevance 62.32%

STOP: c000021a {Fatal System Error} The initial session process or system process terminated unexpectedly with a status of (0x00000000) (0xc000012d 0x001003f0).
I see this error when i try to install windows 7 ultimate from bootable pendrive. it happens after "Windows starting" and then system shutdown.please help.
specs: cpu- intel pentium 4 2.8 ghz dual core
memory- 2gb

Answer:STOP: c000021a {Fatal System Error} When Installing windows 7

Try Overcoming Windows 7 Installation Failures - Windows 7 Help Forums

1 more replies
Relevance 62.32%

While i am installing Windows 7 Home Basic 64 Bit on my SONY VAIO VGN-NW350F laptop i am getting the following error .

Windows Cannot Install Required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570.

I am getting error at installing Windows level.....while Expanding Windows Files at 5% it struck.

Formatted total HDD and given new partitions, No use

I have tried with 3 Different Genuine Windows 7 Disks but getting same problem every time.

Please provide me workaround or good solution to fix the problem.

Thanks In Advance
Shankar
9986680858

Answer:Getting Error code: 0x80070570 while installing Windows 7 Home Premium

Work through these steps for Overcoming Windows 7 Installation Failures - Windows 7 Help Forums

3 more replies
Relevance 62.32%

I am on day two of trying to troubleshoot my Windows 7 Professional 64 bit w/ SP1 Clean Install from OEM System Builder Version. This is my Dad's PC that I built in 2010 with the same version of Windows that I installed previously. I decided to Clean Install his PC because I needed the OCZ Vertex 3 120GB & WD5000AAKX-001CA0 Caviar Blue 500GB from his system and needed to downgrade his PC.

The Original System Specs along with all Downgrades Below:
Case: Cooler Master COSMOS 1000
CPU: Intel i7-930
CPU Cooler: Replaced Corsair H70 Watercooler w/ Corsair H80i Watercooler
Motherboard: ASUS P6X58D Premium
Memory: Reduced Memory from 12GB Patriot PGS36G1600ELK GSERIES 1600Mhz to 6GB of the same.
HDD/SSD: Replaced the above mentioned drives with a Samsung 250GB SP2504C
GPU: Replaced BFG GTX 285 OC w/ EVGA Geforce 8800GT
PSU: Replaced Corsair HX850W w/ XION XON-600F14R-201 600W

Before beginning, I used disk management to delete all partitions on the WD 500GB. After finishing the build I proceeded to create a USB Boot drive (diskpart) via the Windows CD & Windows 7 USB/DVD Download Tool. Next I used my PC and disk management to unallocate the Samsung 250GB, and the OCZ Vertex as well (I think this was my demise). I then connected the Samsung, a DVD Drive, and inserted the USB into Dad's PC.

On first start the system started and Posted fine. Changed IDE to ACHI and Switched Boot Priority to USB. Saved, restarted, and checked to be sure it worked. Proceeded to Windows... Read more

Answer:Clean Installing Windows 7 Pro 64bit, ERROR CODE [0x06069e]

Clean All just finished. I tried to install again and received the same error code .

Any help would be greatly appreciated. Thanks

4 more replies
Relevance 62.32%

Hi

I am facing some issues PERSISTANTLY. I am unable to install 7 updates relating to the following (these are latest updates after I check for updates): -

1. Security Update for Office 2003 (KB2817480) => Error details: Code 8007006E
2. Update for Microsoft Office 2003 (KB2543854) => Error details: Code 8007006E
3. Update for Microsoft .NET Framework 4 on Windows 7 for x64-based Systems (KB2468871) => Error details: Code 66A
4. Security Update for Office 2003 (KB2760574) => Error details: Code 8007006E
5. Security Update for Office 2003 (KB2817474) => Error details: Code 8007006E
6. Update for Microsoft Office 2003 (KB2539581) => Error details: Code 8007006E
7. Security Update for Microsoft Office 2003 (KB2288613) => Error details: Code 8007006E

Can somebody PLEASE help me? I have already tried the system update readiness tool, the sfc scannow tool, various microsoft fixits but to no avail... (.

A million thanks in advance!

Macho3001

Answer:Error Code 8007006E, 66A Problems in installing Updates in Windows 7

Pleasefollow the WindowsUpdate Posting Instructions and post the requested data

1 more replies
Relevance 62.32%

When I try to update it all fails and an error code appears "800f0900"
What should I do?

I have attached the important and optional updates, the error message I get, and the cbs.log files
Hope I'm not missing anything out.




CheckSUR.log

CheckSUR.persist.log

FilterList.log



Thank you! Hope to hear from you guys soon.

Answer:Code error 800f0900 appears when installing windows update

CBS LOG attached successfully

Attachment 360074

9 more replies
Relevance 62.32%

I'm receiving the following error when trying to install apps from the Windows Store on Windows 10. It doesn't occur with every program, which makes it extremely frustrating to debug. The Event Viewer is no help, as it provides the same cryptic messages:
Installation Failure: Windows failed to install the following update with error 0x80070490: Gears of War 4.Installation Failure: Windows failed to install the following update with error 0x80073CF9: Gears of War 4.Installation Failure: Windows failed to install the following update with error 0x80073CF9: Carcassonne.Installation Failure: Windows failed to install the following update with error 0x80070490: Candy Crush Saga.Installation Failure: Windows failed to install the following update with error 0x80073CF9: Candy Crush Saga.

I've Googled this error and searched TenForums but found nothing to help. SFC /SCANNOW reports no errors, re-registering the Windows Store app does nothing, disabling BitDefender does nothing. Is any real help available, or do I have to file a scam report with PayPal since Microsoft is incapable of managing a simple software download?

Answer:Error code 0x80073CF9 when installing apps from the Windows Store

Also tried DISM, but as you can see below, there were no problems.


Code:
Windows PowerShellCopyright (C) 2016 Microsoft Corporation. All rights reserved.
PS C:\WINDOWS\system32> dism.exe /online /cleanup-image /scanhealth
Deployment Image Servicing and Management tool
Version: 10.0.14393.0
Image Version: 10.0.14393.0
[==========================100.0%==========================] No component store corruption detected.
The operation completed successfully.
PS C:\WINDOWS\system32> dism.exe /online /cleanup-image /restorehealth
Deployment Image Servicing and Management tool
Version: 10.0.14393.0
Image Version: 10.0.14393.0
[==========================100.0%==========================] The restore operation completed successfully.
The operation completed successfully.
PS C:\WINDOWS\system32> sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
PS C:\WINDOWS\system32>

5 more replies
Relevance 62.32%

Hey, new to these forums.

My laptop is having some crashing issues which I believe is due to a faulty installation of my current Windows 7. I want to re install it with Windows 7 Ultimate as a clean install. When I go to start up the installation and choose to receive updates, I get the error: "Windows installation encountered an unexpected error. Verify that the installation sources are accessible, and restart the installation. Error code: 0xE0000100"

From what I have read, this is due to a partition problem. Do I need to clear and format all partitions and boot the setup from a DVD? If so, how do I do this? Currently I am just running it using Daemon Tools Lite mounting software.

Answer:Trouble installing Windows 7 Ultimate 64 Bit. Error code: 0x0000100

Hi there
you can try this

1) boot from Windows install / recovery disk and choose repair system ==>tools ==> command mode

type the following in
cd/bootrec
fixmbr
fixboot.

Now try and install again.

If you STILL get an error then get into command mode again via the Windows install disk

now type these commands in
DISKPART
LIST DISK

Choose the disk you want to install windows on -- or the only disk if its a normal laptop

SELECT DISK X where X is the disk number

CLEAN

CREATE PARTITION PRIMARY

ACTIVE

FORMAT FS=NTFS QUICK.

(This will re-format the entire HDD - you can easily re-size afterwards with tools like GPARTED).

Now restart and install Windows -- if it STILL fails then you've got something wrong with the laptop.

Cheers
jimbo

6 more replies
Relevance 62.32%

I'm receiving the following error when trying to install apps from the Windows Store on Windows 10. It doesn't occur with every program, which makes it extremely frustrating to debug. The Event Viewer is no help, as it provides the same cryptic messages:
Installation Failure: Windows failed to install the following update with error 0x80070490: Gears of War 4.Installation Failure: Windows failed to install the following update with error 0x80073CF9: Gears of War 4.Installation Failure: Windows failed to install the following update with error 0x80073CF9: Carcassonne.Installation Failure: Windows failed to install the following update with error 0x80070490: Candy Crush Saga.Installation Failure: Windows failed to install the following update with error 0x80073CF9: Candy Crush Saga.

I've Googled this error and searched TenForums but found nothing to help. SFC /SCANNOW reports no errors, re-registering the Windows Store app does nothing, disabling BitDefender does nothing. Is any real help available, or do I have to file a scam report with PayPal since Microsoft is incapable of managing a simple software download?

Answer:Error code 0x80073CF9 when installing apps from the Windows Store

Also tried DISM, but as you can see below, there were no problems.


Code:
Windows PowerShellCopyright (C) 2016 Microsoft Corporation. All rights reserved.
PS C:\WINDOWS\system32> dism.exe /online /cleanup-image /scanhealth
Deployment Image Servicing and Management tool
Version: 10.0.14393.0
Image Version: 10.0.14393.0
[==========================100.0%==========================] No component store corruption detected.
The operation completed successfully.
PS C:\WINDOWS\system32> dism.exe /online /cleanup-image /restorehealth
Deployment Image Servicing and Management tool
Version: 10.0.14393.0
Image Version: 10.0.14393.0
[==========================100.0%==========================] The restore operation completed successfully.
The operation completed successfully.
PS C:\WINDOWS\system32> sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
PS C:\WINDOWS\system32>

9 more replies
Relevance 61.5%

Dear All,
I need help I have Satellite L500-1GJ windows 7 home Premium. With recovery CD I installed OS but after complete installation my laptop screen shows with lot of rectangular dots on the screen and freezes , I tried many times and it comes to the same problem. Find attached screen shot.

Thanking you.
Best Regards

More replies
Relevance 61.5%

Hello,

My pc start acting up after i made a system restore.For exemple i cant use the fn key function.

Last week i decided to format my pc. But when i opened the TOSHIBA Recovery Disc Creator i got an unespected error 0D00F6-49-00000001.

I mananged to create 2 of the 4 dvd's. Im using Dvd-r from memorex.
Can someone help.

Thank you in advance for your help.

Answer:Satellite L500 - cannot create recovery disks - 0D00F6-49-00000001 error

Is this the first time you try to create recovery discs?

How you have created 2 discs if the Toshiba recovery disc creator starts with error?

Anyway, in this forum you can find similar threads. Probably is some recovery file corrupted and disc cannot be created.
I don?t think there is something you can do about it. Either it works or not. Maybe you should contact nearest Toshiba service and explain the situation. I hope they can help you with this and order original Toshiba DVD disc for you.

2 more replies
Relevance 61.5%

Hi all, just tried to launch recovery media creator on the Toshiba board and the following ERROR CODE: 0d00f6-49-00000015 appears.
This goes after a few clicks on the mouse and the program starts.

Any ideas how to mend this?
Operating system is Windows 7 64bit my new shinny laptop.

any help would be great.

Answer:Re: Satellite L500 - Error appears if I start recovery disk creator

Hi

You used not compatible disk!
You have to test different DVD from different manufacturers.
Not all DVD from different manufacturers are compatible. There are big differences between the brands? So check and try other DVD

4 more replies
Relevance 61.5%

I am receiving emails but always get the above error when sending

More replies
Relevance 61.5%

I am trying to upgrade my pc from windows xp 32 bit to windows 7 64 bit using the the error code comes up at random time i have tried the following
1 removing all usb devices
2 tryed to disable raid
3 removing all internal components apart from the HDD and the DVD rom
4 removing all but one stick of ram
5 tryed boot from usb
6 downloaded and tryed to install evaluation copy still the same

i really dont know what else i can try any help would be great thank you

Answer:error code 0x800705 when installing windows 7 upgrade student edition

Welcome to Windows Seven Forums.

You cannot upgrade from a 32-bit version of Windows to a 64-bit version.

If you want the 64-bit version it has to be a clean install.

http://windows.microsoft.com/en-gb/w...sked-questions

9 more replies
Relevance 61.5%

Hi all,
Just inherited a pc, and bought a brand new 1tb hdd yesterday to install windows on. I was foolish at first by not changing any of the bios settings (was a long time since I have done an install) and just left it as it was. I got through to installing windows and it stopped at expanding files with the above error code, which I have heard is really common
Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation.
Now I am certain there is nothing wrong with the DVD, as it is the same one that has been used on two other PC's. I tried turning it off and restarting, that was when I got another error load up - Bootmgr is missing!
After this I restarted it and changed the bios settings to boot from the DVD drive. I tried doing a repair on this through the disc. Went through all the settings and typed Bootrec.exe/REBUILDBCD in command prompt but that came back fine. I tried clicking startup repair after this but it did not restart, so I just went through the motions and restarted it manually as by this point I was getting frustrated. Upon restart I went through and booted from the DVD, and it went straight through. This time I tried re-installing but deleted all the partitions on the drive which had appeared since trying to install. However the same error message has come up again. Anyone who can solve this for me, I be tempted to send you a box of chocs no matter wher... Read more

Answer:troubles installing windows (clean install) - error code 0x80070017

Is it possible your computer or mobo maker has a newer BIOS update for handling larger HD's? If not reset BIOS to defaults: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS,

While in BIOS setup set SATA controller to AHCI to try install

Wipe the HD with Diskpart Clean Command then follow Step 2.2 here to format a smaller install partition and mark Active: SSD - HDD Optimize for Windows Reinstallation.

Unplug all other HD's and peripherals.

Next remove all but 2gb RAM to try install. Test your RAM - Test with Memtest86+. Then swap sticks to try install again.

1 more replies
Relevance 61.5%

Hey folks,

Been a while since I have logged in here.

But I would like some input on fixing this BSOD. It comes about once a day. Random apps just start crashing (IE) and within a few seconds, the computer BSODs. I saw that it can be due to some bad MSI software.

My tech level isn't horrible, I understand a fair bit about windows and computers.

The .zip file is attached as outlined in the instructions. I appreciate any input and help offered.

Computer is win 7 pro x64 bit sp1 MSDNAA obtained
AMD Phenom II X4 955 Black Edition Deneb 3.2GHz Socket AM3
MSI 870A-G54 mobo
GeForce GTS 450 (Fermi)G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600


Thanks again,
Kunzy

Answer:BSOD after installing/uninstalling MSI products, stop code 0x0000003b

kunzy,
These crashes were caused by memory corruption.
Run these two tests to verify your memory and find which driver is causing the problem.

1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.


RAM - Test with Memtest86+
2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Se... Read more

6 more replies
Relevance 61.5%

Upgraded Satellite C850 to Windows 10 64 bit. CD drive has dreaded code 19. Plugged in external USB CD drive, initially OK but Code 19 when rebooted. Have done the registry upper and lower filter trick but no go. Any ideas

More replies
Relevance 61.09%

Hey I'm Looking For Someone Who Can Help Me With This Problem THAT Im Having With My Windows Xp Installation. After Having Some Problems With My Windows I Recently Decided To Reinstall Windows Xp. In Doing That I Created Some Type Of Problem. MY FIRST MISTAKE WAS NOT CREATING A BACKUP DISK AND NOW I'M LOST. I Now Have No Windows Due To The Fact While Im Installing Xp I Get A Fatal Error Message Indicating Error Code 800b0001, I Have No Idea On Wat I Should Do, The Problem Occurs Time After Time And Now Im Left With No Windows. Can Some One Help Me? What Should I Do?
It Also Says Something About The Nc5iis File, How Do I Repair This Problem?pleaseeeeee I Neeed Help..thanxxx
 

Answer:Problems Installing Windows Xp, Get Error Message 800b0001, Signature Code Invalid

8 more replies
Relevance 60.68%

Hey people, I'm new here looking for help with something I have been having a problem with. I'm not new to computers, but I can't figure this out and I'm hoping someone here can help.I've got a Toshiba Satellite A105-S2071 laptop that's been getting the blue screen of death a minute or two after booting up. I've looked around online and tried various methods to fix it, but being unable to use the computer itself has been making this very difficult.For the specs, it's a Toshiba Satellite A105-S2071 laptop running Windows XP. This is a friend of mine's who is clueless about computers, and as far as I know she's never updated the BIOS or any other parts of the computer.Anyway a few days ago it started crashing on her last week. She says she didn't update or download anything new or change any settings. After it boots up now, you have a minute or so to use the mouse and try to get into the computer, but then the screen appears:"A problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode t... Read more

Answer:Stop error screen on Toshiba Satellite A105, Windows XP

I know that's a really long post, but I didn't want to leave anything out.

7 more replies
Relevance 60.68%

Hi,

get a status error come up when the laptop is turned on. The error code is 0xcoooooe9, windows does not load up and the diagnostics tool does not work.

Tried to recover to factory settings but this crashed out saying partition could not be created and only had an option to turn the laptop off.

Was bought from argos's ebay store less than 12 months ago and should still be under warranty but can not find out if it is on here.

Any help please ??

Message was edited by: MasterG

Answer:My Satellite C wont load Windows - error code 0xcoooooe9

On this virtual way it is not easy to say what the problem is but maybe HDD make problems.
I recommend you to contact nearest Toshiba service provider and ask for help. They can check it.

At first clarify the warranty and I hope they will fix it for free.
Phone numbers and addresses you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

2 more replies
Relevance 60.68%

If it's here I can't find it. I'm trying to do a fresh win 7 install. I am using an old original copy of windows 7 home, that I had been using on my my dell D630 untill it finally gave out. I have upgrade Bios to latest version on driver page. The problem is when install gets to final "configureing system" on first part of install it stops with an error "windows cannot continue as it cannot configure your systems hardware." and thats it I had this problem originally with by dell too, as it was not given windows 7 support, and got around it by installing a custom bios with slic 2.1 support. and then it installed fine. so whats the deal here? it appears support and bios has been given win 7 functionallity. or do I need a modded bios? if so where? the two systems are fairly comparable hardware wise. so I know it shold work. thanx for any help.

Answer:Trouble installing windows 7 home on sl l500

I don't know if this is of any help, but just for your information i have used a Win 7 Home edition Upgrade with absolutely no problems on my daughters SL500. I just insured that the SL500 had the latest BIOS. No problems at all.RegardsMick





SlāinteMick

1 more replies
Relevance 60.68%

Hi there,

maybe I can find some help or advice here:
Satellite Pro L350 / 3GB RAM / 160 GB HD / 2x2,00GHz Pentium Core Duo - OS: Vista Business OEM ( as delivered)
The machine stuck during a copy/paste operation from a website to an email and died with stop error 0x00008086. No further info stated.

No info at the MSKB available. Many forums say this is due to a hardware error in SATA controller, something with ACPI mode - seems to depend on this, switching to compatibility mode in bios causes the machine to dispay no more BSOD, but start of the OS or recovery disk is not possible. Does anybody know about this issue or did encounter a similar prob?
Thanks in advance for any (useful) response ...

Ron

Answer:Satellite Pro L350 - BSOD stop code 0x00008086

Hi RJ,

Generally speaking such BSOD codes are mostly related to driver or hardware problems...
Before you exchange something or contact an authorized service provider for repair, I would recommend reinstalling Windows from Toshiba recovery disk. This can restore factory settings with all pretested settings and drivers from Toshiba. Usually everything should work properly with it.

If not there is a hardware problem but it?s always hard to say what part is exactly faulty. Therefore you need professional help from a notebook technician.

3 more replies
Relevance 60.68%

Hello,
i can't install Windows 8.1 (Windows 8 is running successfull). Is this "by design" (maybe missing support for things like PAE, NX or SSE2. see http://windows.microsoft.com/en-US/w...is-pae-nx-sse2).

Thanks for help

Frank

Answer:Satellite L500-1C7 and Windows 8.1

If Win 8 runs on your notebook properly, then it should be possible to upgrade the Win 8 to Windows 8.1 too…

In order to get Win 8.1, install all Win 8 updates and then access the Windows Store to get the Win 8.1 update.

It should be possible to install the Win 8.1 update in case Win 8 is already up to date.

2 more replies
Relevance 60.68%

I changed my operating system to windows 8 64bit , all hardware defined by windows except chipset & blutooth (I defined them once from Windows 7 another time from latest model like L830). but the function key not working (for wirekess/blutooth on/off ).

Is there any drivers for L500-21T for windows 8 64bit or from specific new compatible models drivers?

Answer:Satellite L500-21T & Windows 8 64-bit

> Is there any drivers for L500-21T for windows 8 64bit...
On http://eu.computers.toshiba-europe.com/innovation/jsp/checkWindows8Compatible.do?service=EU you can check if your notebook is supported for Win8 OS.

One more thing: your notebook has Intel HM55 Express Chipset. Interesting is that Tecra A11 with part number PTSE0E has the same chipset and it is supported for Win8 so you can try to use chipset driver offered for this Tecra notebook.

2 more replies
Relevance 60.27%

Hi,

Could anyone tell me if there is an updated driver for the TSSTcorp CDDVDW TS-L632H ATA Device? The device is not available as a selectable drive and in device manager it reports the following error:

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

I have removed the device and the driver, however on scanning for hardware; vista re-installs the default driver and the same error returns.

Because of this error, I am unable to update the firmware for the drive and the firmware update is unable to see the drive.

Any ideas??

Thanks in advance.

Answer:CD/DVD drive issue on Satellite L notebook - error code Code 39

Hi buddy

What to say?this issue is known and caused by wrong Windows registry entries.
Microsoft has released and published some knowledge articles.

Check this:
http://support.microsoft.com/kb/270008/en-us

First of all I recommend removing the CD/DVD drive from the device list in device manager. Then remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}

Finally reboot the notebook.

That?s all.

PS: you would find this solution also without my help?. You should use the forum search function! It?s helpful!

5 more replies
Relevance 60.27%

I have just bought a satellite click 10 but I cannot activate windows. The error code is 0xC004C008 which is the product key has exceeded its unlock limit. Can anyone help.

More replies
Relevance 60.27%

hello!!

i have a serious issue with my laptop regarding connecting my windows phone .
Whenever i connects lumia 720 it shows error code 31 (windows cannot load the driver for this device ) .

i tried to update the driver from device manager , it says the driver is installed already .
i am using a Windows 7 home basic OS, i tried many ways like rebooting my phone, restarted my laptop, tried to update my laptop through Windows update bt nothing solved the issue .

when i connected my mobile in to my office PC it works very fast and loads all the documents.

kindly help me or give me suggestions regarding to solve this issue

thanks ,
Bipin Philip

Answer:Error code 31 connecting Windows Phone 720 to Satellite C850-B252

Hi

Did you try to connect this smartphone to different USB ports of your Satellite C850-B252 notebook?

If not do that.

As far as I know the notebook supports one USB 3.0 port and two USB 2.0 ports and it strongly recommended to test all the USB ports.

Furthermore you could use an Y USB cable which allows you to connect this smartphone to two USB ports at the same time. In case this issue is related to low USB port power, such cable might be the solution.

1 more replies
Relevance 59.86%

I gonna upgrade my system to windows 7 64 bit, however the windows 7 64 Bit drivers are currently not available for L500-126.
I noticed that the windows 7 32 bit drivers have been available since last week, I am wondering when the win7 64 bit drivers would be ready?

THX!

Answer:Satellite L500-126 and Windows 7 64 Bit Drivers

For my L500-164 I used all Vsta x64 drivers for windows 7. They work.
You could give it a try.

Feodor

3 more replies
Relevance 59.86%

I have bought a new Satellite L500-1PU and tried to load Windows XP and it gave me a blue screen twice.
What could be the problem? If I were to buy an Operating system should it be 32 bit or 64 bit. Please help (They dont come preloaded like the rest in its family)

Answer:Cannot load Windows XP on Satellite L500-1PU

Any suggestions?

4 more replies
Relevance 59.86%

Hi,

I bought a Satellite L500 with Vista as the os. I upgraded to win 7 using the Toshiba upgrade disc I was sent. Since installing Windows 7 my laptop freezes at any time.
Ctrl-alt-del do nothing.

My only option is to turn it off with the power button. I have installed all the available drivers from the Toshiba site but to no avail. Also, since installing Win 7 the FN key does not work, the touch pad won't work and the eco utility won't work. I have checked all the drivers that I can find and reinstalled or tried to update them. I have looked at the settings for the mouse and pointing device and it all says its working.

I think it is because I can't turn it on with the FN key- FN+F9. I can mute the volume now with FN+ESC (couldn?t a few days ago) I can use the FN key to sleep and lock the laptop but the dim/ brightness keys don't work. It seems they work up to F5 only.
Any help would be greatly appreciated.

Cheers

Answer:Satellite L500 - several issues with Windows 7

Hi joey,

Can you find any information in Windows event viewer about this freeze?

You should check the device manager for unknown devices or yellow exclamation marks. Maybe it?s a driver issue.

Regarding the FN keys you have to install Toshiba Value Added Package and Flash Cards Support Utility. They are required for FN keys and then you are able to enable/disable the touchpad (FN+F9).

Last but not least check the Toshiba page for a Windows 7 version of Eco Utility.

2 more replies
Relevance 59.86%

What about Drivers for Windows XP (32-Bit)?

On the Toshiba Driver Site for this product there are only drivers vor vista 32 bit and vista 64 bit...

where can I find drivers for Win XP??? Or do the Vista drivers work for Win XP, too??

I cannot test it now because I first want to ensure that it will work with win xp, after I wanted to install it..

Answer:Satellite L500-164 Drivers for Windows XP?

Hello

The Satellite L500 doesn?t support Windows XP, it supports only Vista 32bit and Vista 64bit. Windows XP is pretty old OS, it? the past. Now it?s Windows Vista or Windows 7.

If you want to install XP you have to collect the drivers by yourself on external websites, like Intel, Realtek and so far.

But to be honest be happy with preinstalled OS. All new notebooks are fast enough for Vista. ;)

Greets

1 more replies