Computer Support Forum

Equium A200 - windows requires a driver for Microsoft ISATAP Adapter

Question: Equium A200 - windows requires a driver for Microsoft ISATAP Adapter

Hello

I'm a complete newbie at this forum and have come in search of help. I have recently bought an Equium A200 laptop with Vista pre-installed.

Lately when I start up the computer and log into Windows I receive a message that windows requires a driver for an unknown device and asks permission to connect to the internet to find the relevant driver. When I click this option I receive a message saying the computer has found the driver but has encountered an error trying to install "Microsoft ISA TAP Adapter".

What is this and why should it need installing? I thought it was rather strange. Any ideas people?

Any help shall be much appreciated.
J.Sutton

Relevance 100%
Preferred Solution: Equium A200 - windows requires a driver for Microsoft ISATAP Adapter

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Equium A200 - windows requires a driver for Microsoft ISATAP Adapter

Hi

I have searched a little bit in the Microsoft knowledge base and found out that this symptom can appears on computers running Windows Vista.

http://support.microsoft.com/kb/932520

Microsoft recommends safely ignore this error message. This error message does not indicate a problem with the adapter, computer or any other devices. The adapter will continue to work correctly.

Here are more details;
+The Microsoft ISATAP device Inter Site Automatic Tunneling Address Protocol is used to help enterprises transition to an IPv6 infrastructure. The ISATAP adapter encapsulates IPv6 packets by using an IPv4 header. This functionality enables the client to transport IPv6 traffic over an IPv4 infrastructure. This approach lets organizations slowly migrate to an IPv6 infrastructure without having to spend excessive time and financial resources to convert to the new infrastructure.+

Regards

1 more replies
Relevance 77.43%

Equium L300 17Q Having trouble installing Microsoft ISATAP ADAPTER #5.
Always get failure to install after auto download.

Any ideas what this update is and how to intall it?
Thanks

Answer:Equium L300 - Can't install Microsoft ISATAP adapter

Google search for "Microsoft ISATAP ADAPTER #5."

There are many results :)

2 more replies
Relevance 99.63%

I uses Acer Aspire 5920, I found in my Device Manager a named Microsoft ISATAP Adapter device driver error exclamated with yellow which is an indication that all is not well. I did not install any adapter to my notebook computer, so how come about this strange device in my system? Please if anyone out there has experience this same problem, please advice on how to solve it, I've asked windows to look for the driver to the Microsoft ISATAP Adapter in the internet but the result was not successful. Where can I find and download the driver for this Microsoft ISATAP Adapter? Please mail me the link. Peter Agboro

Answer:Microsoft ISATAP Adapter Driver needed

Hi, manpita, and welcome to the forums.

When you state you have not installed any drivers, have you installed any hardware at all? if not I'd contact your Acer tech support about this issue.

5 more replies
Relevance 91.84%

Dear All,

I have a sony Vaio VPCZ and I'm having some problem with the Gobi 2000 installation,

in the device manager under network I get a warning sign to the "Microsoft ISATAP Adapter"
also the Qualcomm Gobi 2000 HS-USB Mobile Broadband Device 9225,

and under modem the Qualcomm Gobi 2000 modem device is working properly,

Answer:Microsoft ISATAP Adapter windows 7 Ultimate

read this post on the Vista Forums: Microsoft ISATAP adapter - Page 2 - Vista Forums specifically the bottom line bit,

2 more replies
Relevance 88.97%

I installed upgrades (microsoft) and when I go to Network Adapters under Device Manger i Can see little yellow sign underWhen I go to propreties I get following messanges: "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"Any Solution for this problem? I have Lenovo R61i model, Windows Vista Home Premium Preinstalled, upgraded to SP1, Model type: 7650-A9, 2GB RAM and 160gB hdd Thank youRanko





Ranko--Lenovo R61i, 7650-A9G, 2GB Ram, DualCore 1.6, 160GB HDD

Answer:Microsoft ISATAP Adapter #3 error on Windows Vista Home Premium

I have a similar problem on an R61 - I have a isatap.domain_not_set.invalid error with error code 31 - I have checked and the driver is up-to-date.   What should I do next? Thank you

1 more replies
Relevance 88.56%

Hi

Anyone out there know how enable 




This is driving me insane, almost everyone has the same problem.

Says drivers installed but

Currently, this hardware device is not connected to the computer. (Code 45)

To fix this problem, reconnect this hardware device to the computer.

As you can see all mini ports are not connected either.

Someone out there knows surely.

Thanks

Cherle

More replies
Relevance 88.56%

Hi
Anyone out there know how enable 



This is driving me insane, almost everyone has the same problem.
Says drivers installed but
Currently, this hardware device is not connected to the computer. (Code 45)

To fix this problem, reconnect this hardware device to the computer.
As you can see all mini ports are not connected either.
Someone out there knows surely.
Thanks
Cherle

More replies
Relevance 85.28%

Hello. This is my first time to post a thread here at Techguy.org so I hope this site would make a good impression for me. I am
currently studying IT so this techie forum stuff would soon come in handy. I would just like to know why does each time I troubleshoot my netbook device (Acer Aspire One 722) under Devices and Printers it fails to install and fix itself. The devices are
microsoft teredo tunneling adapter and the microsoft ISATAP adapters (1,2 and 3). First of all what are these devices and their importance and how to troubleshoot it manually. Then is there anything I can do to Prevent this, an exclamation mark next to my device is for me irritating to see. One more thing. Is it safe to uninstall it?? How about reinstalling it after that??. Any help would be greatly appreciated.
 

More replies
Relevance 84.87%

I have a problem regarding my MICROSOFT ISATAP x422 and MICROSOFT TEREDO TUNNELING ADAPTER.

going to device manager there is a yellow mark on MICROSOFT ISATAP x422 and MICROSOFT TEREDO TUNNELING ADAPTER icon and i was wondering what was wrong.

Please help me.

Answer:MICROSOFT ISATAP x422 and MICROSOFT TEREDO TUNNELING ADAPTER

my ASATAP ADAPTER and TEREDO TUNNELING ADAPTER ARE GONE.
is it ok that these devices does not exist on my computer ??

1 more replies
Relevance 84.46%

I am having trouble with my adapter.When i connect it with my laptop it says
Microsoft ISATAP adapter # 4 , unable to upload drives successfully. When i see it says plugged in,not charging.

Answer:Microsoft ISATAP adapter # 4

That is built in with Windows, maybe an sfc command will help
System Files - SFC Command

1 more replies
Relevance 84.46%

My notebook won't accept any updates.

Norton tells me Microsoft ISATAP Adapter #3 device is not working properly Windows cannot load the required device drivers(code 31)

Play and plug ID; ROOT\*ISATAP\0002

I tried to update this but it said it was updated and working, Norton device manager says it isn't.

Any one know of a fix for this?

Answer:Microsoft ISATAP Adapter#3

In device manger Right click the Driver and click uninstall after that Restart your Computer and it should reinstall the drivers

Hope This Helps,
Josh

6 more replies
Relevance 84.46%

Can anyone tell me what this adapter is for? I have a yellow exclamation point next to it in my device manager.

Thanks
 

More replies
Relevance 84.46%

For some reason, I had a Windows 7 64-bit upgrade fail. Now when I go to Device Manager, my wireless router shows 2-Gigabyte as enabled, but then under it I see the following yellow diamond with exclamation points on the following items:
Microsoft ISATAP Adapter
Microsoft IPv6 toIPv4
Microsoft Terleado

Also there is a message station that there is Code 10 error Device cannot start.

I went into Device Manager and looked at each of these, and the software says that they are working correctly. When I look at Roll Back Driver, it is grayed out, and I cannot do this. Also, when I try to get a new driver, everything seems to be blown away. I have had to go back & do a system restore to an earlier point to even get back to this point. Can anyone give me advice on how to correct these problems?? In advance, thank you for any help you can give me.

Bellringer

Answer:Microsoft ISATAP adapter

Between the failed upgrade and using a restore point I'm not so sure that your Op system is going to be useable any longer. What your seeing there is your network adaptor not the router which has it's own page.
A good system image would be the best way to go but you would need to create one before hand using the Windows 7 file recovery in the Control Panel.

I'd have to see a screen shot of your device manager with network adaptors expanded and with the "View" button set to "show hidden devices". It sounds like your network driver was corrupted so reinstalling it may help.

It might help to run some of the ipconfig commands in the link below, you need to type them into an elevated command prompt. Elevated Command Prompt

http://compnetworking.about.com/od/w...a/ipconfig.htm

4 more replies
Relevance 84.46%

Vista Home PremiumI was configuring Acronis Secure Zone when I got a message that this wasn't working. I tried again and it all went OK.When I look in the Device Manager there is a Yellow warning sign.I have looked on Google and found one answer tha this should be ignored click hereAny comments or ideas welcome. My computer seems fine, and I tested the Secure Zone by "restoring"my computer with no problem.

Answer:MIcrosoft ISATAP Adapter 4

"I got a message that this wasn't working"I meant that ISATAP Adapter wasn't working so when it tried to load the drivers for Acronis Secure Zone it failed.However although it says there is a problem, there doesn't seem to be.

3 more replies
Relevance 83.64%

Could anyone can help me to fix my problem...

Answer:Microsoft ISATAP Adapter #4 Error

Right click on the ISATAP adapter and select "Uninstall"
Uninstall the device and close the dialog box's by clicking OK
Reboot the system
Check to see if the ISATAP came back and if it has an error associated with it (most likely it won't).

ISATAP is basically and IPv6/IPv4 translation tool - and if you're not using IPv6 addresses you won't need it on your system. AFAIK the only program that requires it is the new Meeting Space program built into Windows.

1 more replies
Relevance 83.64%

My Wlan driver has gone nuts again i dont know wat to doo.. with itt.. due to this my WLAN is disabled!.

Device manger says: "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"
 

Answer:Microsoft ISATAP Adapter not working..

8 more replies
Relevance 83.64%

I got this problem on my Acer Aspire 3680 (Vista).

http://img18.imageshack.us/img18/9886/errorlha.jpg

And, I have read the response from this thread

http://www.techsupportforum.com/f217...or-393940.html

But the thread is from last year, I am wondering if the solution is still the same. Because after doing a google search, I have read that uninstalling the driver causes more problems, rather than fixing it. If I uninstall, is there any way to install it back. Or is this simply a Windows bug, and there is really nothing wrong with my network adapter?

Any insight will be appreciated.

More replies
Relevance 83.64%

So I was having trouble with my wireless connectivity, and I was looking at my drivers and I looked at the Microsoft ISATAP Adapter #2 driver and it had a yellow triangle with a exclamation point inside of it. So I went to the Microsoft website and used their "Fixit" tool that recognizes problems with drivers and attempts to fix them. When it came to the ISATAP Adapter, it said the best course of action would be to uninstall then re-install, so I allowed the program to do so and at the end this message came up: There is a problem with the driver for Microsoft ISATAP Adapter #2. The driver needs to be reinstalled. Detected.
Now I am trying to re-install it though I cannot figure out how to do so. My computer did not come with a CD with the drivers loaded on it, everything was pre-installed.
Is there a site or a way I can a acquire this driver again?

Answer:Microsoft ISATAP Adapter #2 problems

Welcome
Hopefully simple
Go to search
type device manager
then go to the driver
Then install from the same location. Stay online and choose search the intertnet for a driver
Follow instructions below
Device Manager - Install Driver.

6 more replies
Relevance 83.64%

When logging onto the computer tonight I got an error Code 31, Microsoft ISATAP Adapter #3 error.  When I checked Device Manager, it had Network Adapters opened up with the little yellow caution sign next to ISATAP Adapter #3, and when I clicked on it it gives me the message, "This device is not working properly because it cannot load the drivers required for this device."  If I try to load the driver I get the message, "Windows encountered a problem installing the driver software for your device."Anybody out there have any suggestions.Greg

More replies
Relevance 83.64%

Hi,
Just joined this forum, I am going crazy trying to figure out why my bluetooth device (RFCOMM Protocol TDI) is not working anymore. It used to work, now it doesn't, I uninstalled it, and reinstalled it and it says that I have the most updated driver for it, but the driver is from 2008 and I also uninstalled the Microsoft isatap adapter #4 and can't find to install it again. Both those devices are not working because it says windows could not update them, I can't even find any new updated drivers from Microsoft. I have a Toshiba Satellite L355-S7907. I have tried everything to figure out whats wrong but nothing helps.
I am thinking that the adapter is something I need but can't find it to reinstall it. Also, I ran a driver update and it is saying I have drivers that are ancient and why aren't they updated either with windows update or Toshiba service station. Which by the way is not working right now either.
Thanks in advance for any help with this.

Answer:missing microsoft isatap adapter #4

ISATAP is a addressing protocol used with IPv4 and IPv6 so they can talk. To enable go to Control Panel > Network Connections > then Right Click on your Network Adapter > Properties > it maybe unchecked then just click on the IPv6 check box.

However I don't think this will fix your Bluetooth issue, the Bluetooth chip may have died.

5 more replies
Relevance 83.64%

I didn't manage to find the article on the Microsoft adapter until i had given up and uninstalled it, thinking it was causing trouble. Being new to the net, i didn't really know what it was, and thought it was something I had installed myself. Yeah. Right! So, unlike everything else I had uninstalled, it has disappeared, and I can't trace it to reinstall it. Can anyone tell me what to do? Before it disappeared I managed to write down that it is Microsoft IDSATAP Adaptor, olug and play ID=ROOT\*ISATAP\0004. I have no idea whether that helps or not, it certainly hasn't helped me to track it down so far.
I have an Acer notebook, aspire47102, with windows vista basic. The article I referred to =932520,last review March 15, 2007
 

More replies
Relevance 83.64%

So in my device manager, under Network Adapters my Isatap adapter 5 isn't working. I am getting a code 31 which states "This device is not working properly because Windows cannot load the drivers required for this device"

I have tried updating the driver -It tells me I am up to date
The option to roll back the driver is greyed out
I have tried adding the legacy software -It seems to install without issue, but the error and yellow triangle with ! by my adapter stays there
If I am in normal mode and try to access the internet, my computer freezes. Mouse, keys, screen and everything (Even though my internet connection is very good)
I am using an Asus U56E, 64 bit w/ Windows 7 home premium. My laptop did not come with a disk to reinstall the operating system with, and I am not sure what to do from this point. Any suggestions on how I could fix this problem would be appreciated! Thanks.

Answer:Microsoft ISATAP Adapter 5- code 31

If you can post the ipconfig/all from this machine it would be most helpful.

3 more replies
Relevance 82.82%

Recently, with no explanation, windows vista installed a new adapter (Microsoft ISATAP Adapter) but this was unsuccessful as it appears on my device manager with a yellow explanation mark saying it is not functioning properly because it cannot load the drivers (error code 31).
I've read that I can safely ignore this issue but I would really like to get rid of the yellow explanation mark.
When I try to update drivers it says the latest drivers are already installed and up to date.

What can I do to get rid of this yellow explanation mark, get the adapter installed successfuly and never reappear the problem again?
Any help is appreciated.

Regards,
Nuno Magalh?es.

Answer:Microsoft ISATAP Adapter installation problems

Welcome
In device manager, try roll back to previous version, if that version did actually work properly.
Then set windows upadater to notify and not install. When the updated version is downloaded, right click on it and set it to hide

2 more replies
Relevance 82%

Where i can find raid driver for Windows XP ?

Answer:Need RAID driver for Windows XP for Equium A200-1AC

Please check this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=25846

In my knowledge the A200 series does not support the RAID. But the unit with two HDDs needs an additional driver called Intel Matrix Storage Manager!

1 more replies
Relevance 82%

I can't seem to connect to any wifi. I opened my device manager and looked under network adapters ant there is a little triangle with a ! in it. What can I do to fix this???? I'm a college student who needs access to the internet badly!!

Answer:Microsoft ISATAP Adapter #7 not working reading Code 31

This is only for Ipv6 and does not stop your wireless adapter form working. On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP adapter appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
Do you have a wireless slider switch on the front lip of your laptop? Is it on? Do you have a wireless icon in your system tray by the clock? Can you double click this icon and Scan For Available Wireless Networks? Do you see your Wireless Network? Have you tried to Connect to the Network? Have you typed in your saved Pass Phrase to enter the network?

14 more replies
Relevance 81.59%

Does any one know what this and can explain it to me. Isatap Adapter? I came across it when I was looking at something for someone else in Device Manager and there was a triangle with ! in it so I looked at it because usually there is nothing unusual and that is what I got. When I clicked on it I got the error code 31 which means it needs drivers so I tried to find them but couldn't so I have just disabled it which I hope is the right thing to do. Any thoughts folks?

Answer:Isatap adapter driver error 31

Hi, Seti. According to Microsoft KB Article 93252, this is a known problem and can be ignored.

2 more replies
Relevance 80.77%

I've had problems Opening Folders, My Computer, and even "Windows Update" to fix this driver. Every time I open any folder, or my computer It displays this message "Windows Explorer has stopped working", then it says "Windows is restarting" then it cancels out of the open folder I was in.

I've gone to as far as to see if this was a driver problem, and I think it is. I went to "Device Manager" and It pointed a big Triangular ! mark over "Microsoft ISATAP Adapter #3". Along with this message when I clicked into "Properties".

This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.Click to expand...

I don't know what to do. I have a Toshiba Laptop 2008-2009 (Can't remember), Don't know what model #(If someone can direct me how to achieve the model # of this thing it would be obliged. Any help would be appreciated.
 

Answer:Microsoft ISATAP Adapter #3 (Code 31), Can't open folders or My Computer

7 more replies
Relevance 80.77%

I've had problems Opening Folders, My Computer, and even "Windows Update" to fix this driver. Every time I open any folder, or my computer It displays this message "Windows Explorer has stopped working", then it says "Windows is restarting" then it cancels out of the open folder I was in.

I've gone to as far as to see if this was a driver problem, and I think it is. I went to "Device Manager" and It pointed a big Triangular ! mark over "Microsoft ISATAP Adapter #3". Along with this message when I clicked into "Properties".


Quote:




This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.




I don't know what to do. I have a Toshiba Laptop 2008-2009 (Can't remember), Don't know what model #(If someone can direct me how to achieve the model # of this thing it would be obliged. I read how you guys helped angel51793 I was wondering if you could give me the same help.

[SOLVED] Network Adapters code 31 error - Tech Support Forum

Thank You,
Hiphopfather247(Yeah I know long name right, used to admin. forums for hiphopsites. just call me HHF247)

More replies
Relevance 73.8%

I am new to this (and other) forum so apologies if this has already been answered.

I have got an Equium A200-1V0 which came with Vista Home installed. I was asked (as it's a work machine) to install XP Pro on it instead of Vista.

Now I have got ALL the drivers loaded and working except for the Ethernet Controller. I am at a total loss as to what to do as I have tried every driver I can find including some of the Vista ones.

I can't seem to identify whether it is built in to the Mobo or is attached via PCI. I can't find any panel underneath to change to a different PCI though it could be under the keyboard (am loathed to take it apart too much yet).

Any help would be greatly appreciated.

Answer:Re: Equium A200-1V0 using XP - Lan driver needed

The A200-1VO belongs to the PSAE6E series.
Please choose this series to install the right LAN driver!!

Just one note; The notebook was equipped with the Realtek(10/100M) LAN chip.
If you want you can test a LAN driver from the Realteck website.

PS: If you use the XP on this Vista notebook you have to update the BIOS to the XP version.
This is very important to ensure that some further notebooks features will still be available and will work using XP OS.

18 more replies
Relevance 72.98%

I am having some issues with my Equium A200-1VO.

Firstly, I cannot seem to get the CD/DVD RW to write any dics. The drive also opens itself from time to time.

Secondl, I just downloaded and installed the latest Realtek HD audio driver, under Toshiba's advice, only to find that when I plug my headphones in the sound still comes out of my laptop speakers.

Any help or thoughts?

Thanks

Answer:Equium A200 - issues with CD/DVD RW and Realtek HD driver

So many different issues. Before we start discussion about all described issues just one question for you: Is your notebook preinstalled with Toshiba recovery image (factory settings)?

4 more replies
Relevance 72.98%

The download file display-20070809135415.zip is corrupted when downloaded from the Toshiba site, its the VGA driver for this laptop.

Any chance someone has a valid copy they could send to me or is there a moderator on site that can get this file sorted out please?

Answer:Equium A200-196 - Corrupt display driver

Hi buddy,

Why is the driver corrupt?

Do you get an error message or what happens exactly?

3 more replies
Relevance 72.98%

I could not burn cd's in itunes, getting error 2131...so updated a driver TSST corp CDDVDW TS-L632H ATA Device....retstarted pc and now i cannot even open CD rom drive. i used a pin and opened it to put in a cd but it cannont detect that either....so a wrong driver i guess but don't know where to start to get the correct one.

very frustrated!!! Thanks

Answer:Equium A200 - ODD now unresponsive after adding a driver

Have you downloaded this firmware update from Toshiba support page?
I don?t know which A200 (A200-xxx) do you have exactly and cannot check it.

2 more replies
Relevance 72.98%

How do I reinstall the ISATAP adapter? My computor is a Pavilion dv5 1125nr laptop. My operating system is Windows Vista Home Premium 64 bit. I followed instructions removing and reinstalling it but I can't find how to reinstall it anywhere. Any help would be appreciated. thanks, Betsey1955Edit: Moved topic from Introductions to the more appropriate forum. ~ Animal

Answer:Help with reinstalling ISATAP Adapter windows Vista

Are you still able to get online?http://support.microsoft.com/kb/932520

1 more replies
Relevance 72.98%

HOW CAN I DOWNLOAD ISATAP AND INSTALL IT AGAIN BECAUSE I UNISTALL IT

More replies
Relevance 72.16%

I have a problem. I have formatted my Equium A200 (PSAE8E) and installed all drivers but only one driver doesn?t work. It is CONTOLLER MEMORIA DI MASSA PCI. Does someone know where I can find this driver?

Answer:Need WXP Mass storage driver for Equium A200 (PSAE8E)

Take a look on the Toshiba driver:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

There you will find the Intel Storage Manager 7.5.0.1017 for XP.

1 more replies
Relevance 72.16%

this any good,http://www.google.com/url?sa=t&rct=...qrysBA&usg=AFQjCNEiynyHT4iS8xPwH3AxGtSSUcgqRw
 

Answer:Windows 7 and IPv6, ISATAP, Teredo Tunneling Adapter

I tried what you posted, and it kept telling me that the last command line was not found. It will doesn't work.
 

1 more replies
Relevance 71.75%

Hi all,

I am trying to update my display driver to the latest revision posted for my model laptop on the Toshiba site but on running the setup exe I?m returned with an error stating my system is not compatible with driver ver 7.14.10.1461.

In info clearly states it compatible with an A200 (PSAE2).
Anyone had a similar problem.

Answer:Cannot install latest display driver for Vista 32-bit Equium A200

Hi

Just one question; what graphic card does the notebook support?
Do you have an Intel graphic chip or another chip?

4 more replies
Relevance 71.75%

Hi

My CD/DVD driver has suddenly stopped working. Although it says the driver is installed and up to date, I cannot get it to work. If I look at the device properties it says

+Windows cannot load the device driver for this hardware. The driver may be corrupted or missing (Code 39). I have been unable to find a solution so far+.

Any idea what is wrong and how I fix it?

Thanks,
Wendy

Answer:CD/DVD drive not recognised - Equium A200 1VO - Device Driver installed

Hi, try the instructions provided in this KB:
http://support.microsoft.com/kb/982116

3 more replies
Relevance 70.93%

Can anyone help? I downloaded a sound card driver from Toshiba's update page and now my headphone jack wont work.
The sound just plays from laptop speakers.

Please someone give answers.

Cheers

Answer:Headphone jack does not work after installing sound driver on Equium A200

Hello Rocko

I do not know how to give the answers. Maybe you should explain your problem a little bit better. For example:
Which OS you use? Why you have installed sound driver? Is the reason your own OS installation or you have had some sound problems before?

Sorry but I just want to understand what happening with your Equium notebook?

2 more replies
Relevance 68.06%

I have instaled new Windows XP and dont have drivers for my Wireless Network Adapter Atheros AR5005G and my USB 2.0 If Anybody could help me from where can i download them

Answer:Equium L20 - no driver for Wireless adapter and USB

Hi,

normally you can download all drivers from Toshiba's download page
http://eu.computers.toshiba-europe.com
go on "Support & Download", "Support homepage", "Download drivers"

Bye

1 more replies
Relevance 66.01%
Question: ISATAP ADAPTER

I UNISTALL ISATAP ADAPTER HOW CAN I INSTALL IT AGAIN?

More replies
Relevance 66.01%

I'm trying to install windows XP on EQUIUM A200 PSAF5E, but I can't. I had followed the link:

http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=107596

and following the instruction it's look very easy, but the link to download the drivers, download an EXE file instead INF file. I can't create a new boot CD with NLite due to I can't extract the INF files to compilate in a new CD.

Anybody knows how to do it..

Thanks.

Message was edited by: teoista

Answer:Windows XP and Equium A200 PSAF5E

Hi

Don?t use any 3rd party websites for the SATA driver download.
Either you should download the Intel Matrix Storage Manger from the Toshiba European website or from the Intel website directly.

On the Toshiba page you will find the Intel Storage Manger under
Notebook ? Equium - Equium A series ? Equium A200 (i.e PSAE8) ? Storage Manager

This package contains the needed INF files

Bye

3 more replies
Relevance 66.01%

Hello,

I uninstalled vista on my Equium A200 laptop. My idea was (a popular one) to uninstall vista and run xp to get rid of that unstable operating system (sorry, personal opinion)

Of course the XP install noted that I have no drives on my pc. I got the SATA drivers, bought an external floppy drive and F6'ed my way to the windows install. I needed to manually edit some files on my floppy drive, so the OS install would find the drivers as well. I got through the full installation, when it saves the settings in the very end bit, it restarts automatically(I can't remember if XP was supposed to do that by default, anyway) when it the system boots up again it pops up the blue screen of death for about 0.5 seconds and restarts.

Now, i also had a disk modified with nlite so the drivers were on there so i tried this and everything was the same ( I didn't need to F6 my way through the install) and the final blue screen of death noted that there is Again, a problem with my HDD and to have me check it for viruses.

I am out of ideas at the moment. I don't want to take it back to the shop cause they will probably charge me for it and still put vista back on.

any ideas?

Thanks in advance

Answer:Cannot install Windows XP on Equium A200

The XP installation should be possible. Don?t see any serious reasons why the XP shouldn?t run on your A200 Equium.

As you know the SATA driver (Intel Matrix Storage Manger) must be included while the XP setup is running?

Very important is that you would install an XP with SP2!!!
Win XP without the XP2 could makes troubles

Greetings

2 more replies
Relevance 65.19%

I have just replaced the hard drive on my toshiba equium A200-1VO and am trying to load XP but I keep getting a message to say there is not hard drive.
Can anyone help me?

Answer:Re: Equium A200-1VO - Windows XP cannot see hard drive

Hi

Did you use the SATA HDD?
A200 series supports SATA controller and you need SATA HDD (not IDE).

Furthermore the SATA HDD needs SATA drivers. Win XP does not contain such driver and therefore you have to include this.

Search here in the forum for SATA drivers A200 to get more details and info.

Good luck

3 more replies
Relevance 65.19%

My son decided to use the dvd for putting his biscuits in.
This has nackered the dvd. So when my hard drive packed in i got a new hard drive and an external dvd player.

Tried to boot from usb but didn't recognise the dvd player. So put the hard drive in my pc and loaded windows on it.
Put hard drive back in laptop and nothing happens just get pxe-e61: media test failure, check cable and pxe-m0f : Exiting pxe rom,

This just goes round and round flashing on the screen.

Any ideas anyone

Answer:Equium A200-1VO - windows re-installation problem

Hi

From my experience the BIOS of A200 does not allow booting from external CD/DVD drive. You can boot either from HDD, internal CD/DVD drive, USB FDD or LAN.

The error pxe-e61: media test failure appears because the notebook tried to boot from LAN.
I think this happens because the HDD or Windows on the HDD was not recognized.

You could try this:
Copy the i386 folder of Windows XP to the HDD.
Then put the HDD into the notebook. Boot from bootable USB FDD (diskette) and go to the i386 folder on the HDD.
There you could use the command winnt.exe in order to start the Windows XP installation setup.

Should work?

2 more replies
Relevance 65.19%

Trying to find out if it's OK to upgrade Equium A200 with Vista to Windows 7
I ran the "Windows 7 Upgrade Advisor". It lists several Toshiba Apps and/or drivers with the comment "we don't have any compatibility information about this version of the program". It helpfully links to Toshiba's Windows 7 ugrade site, and eventually to this link -

http://aps2.toshiba-tro.de/kb0/KBA9A02PX0000R01.htm

"For Toshiba PC models NOT listed below, Toshiba offers "Limited Driver" support on a clean installation of the Microsoft Windows 7 operating system."

No Equium models are listed.
What on earth does "limited support" mean in relation to Equium A200 + Windows 7. IOW, is it OK to upgrade to Windows 7?

TIA,
Peter

Answer:Equium A200 Vista to Windows 7 upgrade

>What on earth does "limited support" mean in relation to Equium A200 + Windows 7. IOW, is it OK to upgrade to Windows 7?

That means that not all or no Win 7 drivers would be released for models which are not listed there in the list.
There are two possibilities to install win 7.

- You can make a clean install.
This means to format the whole HDD and to reinstall the Win 7 on a fresh formatted partition or HDD.
In such case you will need to install all drivers

- You can make an upgrade from Win Vista to Win 7
In such case the Win 7 would be installed over Vista and this provide one advantage; the installed Vista drivers (not all but many) can be used by Win 7.
As you know many Vista drivers are compatible with Win 7 and therefore some Vista drivers could run on Win 7.

4 more replies
Relevance 65.19%

greetings,

Question 1: does ISATAP adapter#3 allow someone else to tunnel through my wireless antenna, or a wireless router and into my computer?

Question 2: does ISATAP adapter#3 create a weakness that would allow others to access my system?

Backkground: i booted up this morning and immediately i received a balloon message stating "ISATAP adapter#3 driver installed."

i have my updates set to review and selectively install, so this shouldn't have happened given i did no updates yesterday.

also, in case it's relatvent, about 4 days ago i had my hard drive wiped, rebuild, and updated.

i googled ISATAP adapter#3 and found some info in the Vista forum, but didn't understand it. what i did catch is ISATAP adapter#3 has something to do with "tunneling."

v/r tspt

More replies
Relevance 65.19%

I have a Dell Inspiron 531 that is running Windows Vista Home Premium, and I noticed the following problem when I accessed the device manager to check out the status of my ipod...
 
The network adapter, Microsoft ISATAP #2 is not working properly because Windows cannot load the drivers required for this device. (Code 31)
 
I checked online for any solutions available, but didn't find anything useful.
 
I'm not sure exactly how this could be affecting my PC, but it has been subject to some erratic behavior lately, so I'm just wondering if there is a fix for this.
 
Thanks

Answer:ISATAP adapter #2 not working

http://support.microsoft.com/fixit/ seems to take care of this for some.
 
Louis

1 more replies
Relevance 65.19%

Hi, when I open up device manager, under the “network adapters” tab, there is a yellow exclamation mark next to “isatap.{1571B893-418B-4845-85A8-C0509A7C41CF}.” When I check under this devices’ properties, it says “This device cannot start. (Code 10).” I'm using Vista btw (if it makes a difference).

is there any way to fix this?

thanks in advance!
 

Answer:isatap adapter problem

10 more replies
Relevance 65.19%

It just simply states that I have a problem with my Adapter and that Windows cannot load the drivers required for this device.
 

Answer:Problem with ISATAP Adapter

Please be more specific about the environment and the exact error. Are you running VIsta? Check this link: http://support.microsoft.com/kb/932520
 

1 more replies
Relevance 65.19%

greetings,

Question 1: does ISATAP adapter#3 allow someone else to tunnel through my wireless antenna, or a wireless router and into my computer?

Question 2: does ISATAP adapter#3 create a weakness that would allow others to access my system?

Backkground: i booted up this morning and immediately i received a balloon message stating "ISATAP adapter#3 installed."

i have my updates set to review and selectively install, so this shouldn't have happened given i did no updates yesterday.

also, in case it's relatvent, about 4 days ago i had my hard drive wiped, rebuild, and updated.

i googled ISATAP adapter#3 and found some info in the Vista forum, but didn't understand it. what i did catch is ISATAP adapter#3 has something to do with "tunneling."

v/r tspt

More replies
Relevance 65.19%

I wish to reinstall isatap adapter 4 ..I deleted it in error and since then have not been able to use my printer . I get the error 1068 local print spooler service not running I think it is due to this. I have tried to restart the spooler but am unable to. Can you tell me how to reinstall it.

More replies
Relevance 65.19%

Hello,

New to the forum,and would be delighted with any help I can get.

Have Network Adapter issues with DELL Inspiron 1525, basically would not let me connect to the internet.
Followed the trail instructions - uninstal (both 3 and 6) and reboot - it reinstalled but did not change situation.

Then I disabled (both 3 and 6) and tried to re-enable using ACTION via Device Manager and clicking Add Legacy Hardware and used the wizard to install Microsoft ISATAP. It said the installation was successful. The ISATAP 3 and 6 icons did not appear under Network Adapters in Device Manager. When I rebooted, the wireless adapter also stopped working. The machine is still not connecting to the internet.


Any hope for me? Please help!


Great regards,

Dannyi

Answer:Network Adapter ISATAP 3 and 6!

Hello Dannyi,

In order to assist you further, please let me know few details about the issue:

From which article did you followed the steps you have mentioned?Do you get any error message when you are trying to connect to the internet?Since when are you facing the issue?Are you trying to connect through a wired or wireless connection?
Please write back with details, I'd be glad to help!

1 more replies
Relevance 65.19%

 (I originally posted this in error on Hardware/Drivers)
Device Manager (under Network Adapters) shows MS ISATAP disabled with "Windows cannot load driver...(Code 31)".  When I try to update the driver, "Best driver already installed" comes up.  The option to rollback driver is greyed out.  A previous suggestion was to disable it in Dev Mgr and disable IPv6 in Network Connections. However, when I did this,  both IE-7 and Windows Mail got a little flaky with some random errors and slow connections.  Re-enabled IPv6 and both IE and Mail appear normal.  Even tried removing driver but Windows recreates it on next boot with same error in Dev Mgr.  Here is the line from Dev Mgr:
 isatap.(F36ED1D6-98AB-4569-9DD6-03FB92BCB8C6)
Is there a way to restore this driver without a complete OS reinstall or System Restore?  Or is it even necessary? 
(Vista Build 5600 32 bit;  Dual boot Vista/XP on separate drives; Home network with two computers).      

More replies
Relevance 65.19%

Why do I have so many of them?

My internet has been out since last night and I will call the ISP if it's not back on by morning but I was being nosy and was looking at my ipconfig settings and that's when I noticed them. There is 3 Tunnel adapter isataps (#2,3,& 4), one tunnel adapter reusable isatap interface and one tunnel adapter teredo tunneling pseudo-interface. What are they and why have I never seen them before?

Thanks all!


Oh and it's a W7 Dell Studio 1558.
 

Answer:What is a tunnel adapter isatap?

Has to do with ipv6 stuffs. Nothing to worry about.
 

2 more replies
Relevance 64.78%

I have applied Windows Vista SP1 Italian in my Equium A200 (PSAE8E) and updated latest bios 2.20.
Everything works fine and now the blu light under the words EQUIUM is off.
I am happy not to waste any more power for lighting the EQUIUM words, but I wonder where there is a control for that.

Answer:Equium A200 - no more light in the EQUIUM label

This LED can be enabled/disabled in BIOS. Please enter BIOS settings, enter advanced settings and check the last option. I do not remember anymore the exact name for this but you will find it there.

2 more replies
Relevance 64.37%

Hi all, I've just upgrade my partner's laptop (a Toshiba Equium A200-196) to Windows 7 after initially installing Windows XP on it (it came with Vista).

After the XP update, I noticed certain keys weren't working. I can't remember the process I used to fix the issue, but fix it I did, and they were all soon working perfectly. So it was a software issue, rather than hardware. I think it may have had something to do with the FN key - but I can't be sure.

Now I've just upgraded the same machine and I have exactly the same problem. The keys that don't work are Backspace, W, P, F, H, K and L.

Can anyone help please? I've tried reinstalling Win7 and the problem is still there.

Many thanks,

Andy

Answer:Certain keys not working on Equium A200-196 after Windows 7 update

>The keys that don't work are Backspace, W, P, F, H, K and L.

These keys have nothing to do with the missing software.
Indeed, the function key (FN key) needs an installation of particular Toshiba utility / software to get it working but the Backspace, W, P, F, H, K and L keys are common keyboard keys which don?t needs any special software.

Therefore I think the issue is hardware related: simple keyboard malfunction.
I guess all these keys would work properly if you connect and use external USB keyboard.

2 more replies
Relevance 64.37%

In my Toshiba Equium A200 PSAE8E-001001IT, even using latest bios v.2.10 with Windows Vista 32, the Intel Turbo Memory v. 1.5.0.1013 always reports that Windows ReadyBoost is activated, while Windows ReadyDrive is not. If I turn it on, it aways turns back to disabled when rebooting to apply the new Intel Turbo Memory settings.

Is it an hardware limitation or a software bug?

Thank You for all help.
Paolo

Answer:Equium A200 PSAE8E: Windows ReadyDrive disabled

Windows ReadyDrive is a feature to support the use of hybrid hard disk drives. (H-HDDs)

Your notebook has no H-HDD, so Windows ReadyDrive is disabled. ;)

2 more replies
Relevance 64.37%

I've had my Ipod for over a year now i used it fine on my old computer which was running on XP.
I now have my laptop Equium A200 series running on vista.
When i first connected my ipod to it it showed up and asked if i would like to connect my ipod to this computer instead of the other pc so i accepted.
It cleared all my songs so i can put my new music on.
Once it had done this my laptop could not pick up my ipod anywhere.

When I connect my ipod in the laptop makes a noise to show it's recognised it's been connected, but when i go to itunes it doesn't show up.
I've been into device manager to check there it has a ipod symble with an ! mark next to it, so i click update driver but nothing is ever found.
My Ipod charges fine and works fine, i've been on apple website looking for solutions i've restored my ipod everything they've sugested but nothing seems to work. Can someone please help me i miss using my ipod.

Sorry if i've posted this in wrong place first time user don't know my way around the site yet.

Many thanks if you can help.

Answer:Ipod won't work under Windows Vista on Equium A200

Hm, maybe you should reinstall the Ipod software. That would be the only idea I have. Otherwise you should take a look at the BIG Apple forum. ;)

Nice weekend and good luck

1 more replies
Relevance 64.37%

I uninstalled my ISATAP network Adapter driver and tried to reinstall it using legacy hardware but after reinstalling isa network adapter it no longer shows up in my drivers list

isatap.(F36ED1D6-98AB-4569-9DD6-03FB92BCB8C6)

More replies
Relevance 64.37%

Acer Aspire 4520
Wireless network no longer works.
The light on keyboard is lit up but when pressed, it says No Device.
Went out a long time ago and I quit using the laptop. Borrowed external adapter which works.
No updates found for driver.
 

Answer:ISATAP Adapter yellow(!) Vista

10 more replies
Relevance 63.55%

Hi...my daughter accidently ran her recovery disc for her Equium A100 in my Equium A200 laptop,when I got home and booted it I got the message
..
>Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:

1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."

If you do not have this disc, contact your system administrator or computer manufacturer for assistance.

File: \Windows\system32\winload.exe

Status: 0xc0000000f

Info: The selected entry could not be loaded because the application is missing or corrupt.
..
I no longer have my recovery disc and can not afford to replace this,is there any alternative sollution,I have a Symantec File recovery/Restore disc on loan from a friend but am unsure if this is of any use,when I run it I get the message that there is no restore point and this is as savvy I am in using these things,this is driving me mad as this laptop as does many these days did not come with an OS disk(my OS is Vista Home Premium)...Any help wouls be gratefully recieved.

Answer:Equium A200 - Windows failed to start after using another recovery disk

Hi!

The reason is why you used the recovery disk from another notebook and this will not work.
I think you need the recovery disk for your Equium A200 notebook.

I don?t have experience with the Symantec recovery function but I can prefer you to use a Toshiba recovery disk. This contains all drivers and tools from Toshiba and so you can make sure that all works after that.

If your notebook was delivered with a recovery disk, contact the nearest ASP and ask for a new one.
If your notebook was not delivered with a recovery disk, you can order a new one form Toshiba directly:
https://backupmedia.toshiba.eu/landing.aspx

Bye

2 more replies
Relevance 63.55%

Hi, I have just installed a new Hard disk and used the Win 7 Home premium recovery discs supplied by Acer. My wifi is functioning but my desktop is unable to connect. I have run the ipconfig /all (attached) and see the tunnel adapter isatap media disconnected message.

Any help would be appreciated.

More replies
Relevance 63.14%

Ok this is what?s up. I uninstalled Vista from the laptop and installed Windows XP Professional (5.1, Build 2600) Service Pack 2. Every driver I have installed works fine except my audio driver. There is no sound.

I have installed Realtek many times and it installs ok then says restart for it to take effect but when I restart there is still no sound. Installed driver is listed in Add/remove program. I?ve tried for nearly a week now to fix this problem and nothing happen.

The driver was MICROSOFT UAA BUS DRIVER FOR HIGH DEFINITION AUDIO with a yellow (!) next to it. When I tried open Realtek it says EQ Failed or summit and there?s a bleep noise from the laptop.

Toshiba virtual sound doesn?t work as well. I accidentally uninstalled the driver and now it says PCI device and tells me to insert the MICROSOFT UAA BUS DRIVER FOR HIGH DEFINITION AUDIO Disc but I don?t have it.

It?s been driving me mad and I do not know what to do.
Please help me!

Answer:Equium L40-10Z - need Microsoft UAA bus driver for High Definition Audio

Hi there,

first of all make sure you have installed all important windows updates. All updates on your system? OK.

Please visit the site www.realtek.com and download the latest driver for realtek HD soundcards. This driver WORKS 100% since I had a similar problem and after installing the genuine realtek drivers, I had no problems with sound.

Hope it works for you, too.

Greets

1 more replies
Relevance 63.14%

I finally got the Troubleshooter problem fixed. So I find that the MS ISATAP Adapter, Adapters 2 and 3 and the Teredo Tunneling Pseudo Interface are showing a code 10. I tried letting the machine install the drivers and all four failed. What do I do now to get new drivers?

Would this have something to do with my Fuji Finepix software not working all of a sudden. I get a fatal error when I connect the USB to my camera to download pics.

Thanks for any help.
Julie

Answer:MS ISATAP Adapter,2,3 and Teredo Tunneling Pseudo Interface Need help

Hi ... Try the solutions in the Link below ....

https://social.technet.microsoft.com...tpronetworking

3 more replies
Relevance 62.73%

I have updated my windows 8.1 to Windows 10 . But my intel HD graphics driver/Microsoft Basic Display Adapter is missing in the DeviceManager. How can I enable again the driver for using 3 displays(2 external monitors)?I have search for BIOS but the BIOS seems like doesn't have the option to choose Nvidia Optimus for switchable Display adapter. here is my Computer Specs and the Device Manager.I have tried to downlaod the Intel VGA driver from Lenovo IdeaPad Y400 page. But it shows this error. Does anyone can help me please?

More replies
Relevance 62.32%
Question: Microsoft Isatap#3

Cant seem to find the driver for this. Microssoft doesnt seem to have an answer, and I cant find it either! Im not a It, but im able to grasp and learn new things. I need help, also Seem to be having an issue with internet explorer closing improperly, and sudden.

Another issue is spybot. Its some how missing:unins000.msg cant seem to locate it, ive tried to install an older version using oldversion, but no luck! Im wanting to uninstall it entirely.

Another issue is: mia.lab in adaware. Same situatiuon, no luck!

this is a brand new Toshiba notebook.
Windows 7
its a: Toshiba Satellite A500

Would greatly appreciate any help!
 

Answer:Microsoft Isatap#3

Hi

The ISAtap#3 error is a bit of a glitch adn related to TCP/IPv6 which is not actually being utilised much at present as we are still more using TCP/IPv4 for our internet domains, urls etc

This is for Vista and server 2008 but relates to Windows 7 too http://support.microsoft.com/kb/932520/en-us

What you could do for now to see if this removes the yellow ! mark on that device is to open Network and Sharing Center > click Change Adapter Settings right click your LAN connection and choose properties, then in the Netowrking tab untick TCP/IPv6 click Ok and reboot.

For the other two items, try Revo Uninstaller

Do you have Kaspersky Antivirus installed? if you do I know one of its virus dat updates did flag a few antimalware apps a bad and deleted the files and one was mia.lib (AdAware file) try re-installing the current versions of those twp applications and not oldversions, or dependednt on when this happened run System Restore to when you knew they were ok.

Then do the first paragraph info for the ISATAP#3 issue
 

1 more replies
Relevance 61.91%

: Cry:: Cry:Bonjour, je dispose d'un ordi ACER Aspire 7720Z, j'ai trouv? dans mon gestionnaire de p?riph?riques un nomm? Microsoft ISATAP adaptateur pilote de p?riph?rique avec un point d'exclamation jaune qui est une indication que le pilote install? est fonctionnel, mais n'est pas ? jour. J'ai essay? de le rechercher pour pouvoir le r?installer mais sans succ?s... le pilote demeure toujours le m?me! je n'ai pourtant pas installer n'importe quel adaptateur sur mon ordinateur portable, alors comment cette erreur ?trange ? pu ce produire? dans mon syst?me? S'il vous pla?t, si quelqu'un l?-bas a l'exp?rience de ce m?me probl?me, s'il vous pla?t des conseils sur comment le r?soudre, j'ai demand? ? regarder les fen?tres pour que le pilote de l'adaptateur Microsoft ISATAP dans l'internet, mais le r?sultat n'a pas ?t? couronn?e de succ?s. O? puis-je trouver et t?l?charger le driver pour cet adaptateur Microsoft ISATAP? S'il vous pla?t m'envoyer le lien. Didier Clere

Answer:Pilote Microsoft ISATAP 32-Bit

Bonjour, parlevouz Ingles merci.

5 more replies
Relevance 61.91%

Had driver problem and reinstalled Microsoft ISATAP Adaptor accordind to your instructions advised may not work  "Device cannot start (Code10).  Can you help?

More replies
Relevance 61.5%

Having an issue in our environment.

We have not deployed IPv6 however all windows machines automatically generate an IPv6 6to4 and ISATAP tunnel adapter addresses.These addresses are sometimes registered in DNS and when doing name resolutions for applications, they are returned and connectivity fails.

Is there a way to prevent these addresses from registering or making it to where the tunnel addresses can actually be used for connectivity between hosts internally without deploying full IPv6 solution?

Thanks.

-Szaz

More replies
Relevance 61.5%

Having an issue in our environment.

We have not deployed IPv6 however all windows machines automatically generate an IPv6 6to4 and ISATAP tunnel adapter addresses.These addresses are sometimes
registered in DNS and when doing name resolutions for applications, they are returned and connectivity fails.

Is there a way to prevent these addresses from registering or making it to where the tunnel addresses can actually be used for connectivity between hosts
internally without deploying full IPv6 solution?

Thanks.

-Szaz

More replies
Relevance 61.5%

Having an issue in our environment.

We have not deployed IPv6 however all windows machines automatically generate an IPv6 6to4 and ISATAP tunnel adapter addresses.These addresses are sometimes registered in DNS and when doing name resolutions for applications, they are returned and connectivity fails.

Is there a way to prevent these addresses from registering or making it to where the tunnel addresses can actually be used for connectivity between hosts internally without deploying full IPv6 solution?

Thanks.

-Szaz

More replies
Relevance 60.27%

I have a few extra Microsoft ISATAP adapters when i do an ipconfig/all. Can I delete some or all of them and furthermore what is their purpose(s)?

Answer:Is it safe to delete the Microsoft ISATAP adapters?

Quote:
The ISATAP #9 is related to Internet Protocol 6, which can cause issues with devices that don't use it and can safely be uninstalled as most networks today still use IPv4.

To remove IPv6 and all of it's associated devices:
Go into the properties for each network adapter, wired and wireless, and either uncheck the box next to Internet Protocol 6 (TCP/IPv6), that will disable it, or select it and click uninstall, which will remove it off the computer. Then go into device manager and remove any 4to6 adapters, WUN miniport adapters, or ISATAP adapters. Then reboot your computer.

If that does not work, try this:
To reset the TCP/IP stack go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

How to reset Internet Protocol (TCP/IP)


You can get rid of them. Its basically items that come installed with the machine. Its a protocol to fix issues between IPv4 and IPv6 Devices

2 more replies
Relevance 60.27%

While troubleshooting my Vista Networking Problems, I noticed that I have over 30 MS Isatap Adapters installed on my laptop. Can I get rid of them and how to stop them from coming back.There are also several isatap.[domain.com] adapters that are visible in safe mode or if I select to show hidden devices in normal mode.
I dont think this is normal!!!!!!!!!!

Pleeeeeeeeeeeeeeeeeeeeeeaaaaaaaaaaaaaaaaaseeeeee Heeeeeeeeeeeeelp!!!!!!!!!!!!!!!!??????????????

More replies
Relevance 59.86%

Hello guys,

I dont have any idea anymore how to fix this problem, i've been looking to the microsoft answer site, and tried the microsoft fixit device, but still it couldn't be solved.
I'm afraid that there's something gone wrong with my hardware, see if you guys could help me with this.




thanx a lot!

Answer:Microsoft Isatap problem (code 10), no network connection, help please

I've actually seen this randomly added to machines that don't even need it to function.
Generally the solution is just to uninstall them all and reboot the machine.
If they are needed the system will automatically re-detect and load them.
If not, they are out of the way.

9 more replies
Relevance 59.86%

OS Windows Vista, Device Manager (see Below)

I cannot delete the ISATAP entry and it is causing the ATA optical drives to be in error state also.

Any Ideas?? I'm pulling my hair out.
 

More replies
Relevance 59.86%

Error: unrecognized or incomplete command line.

USAGE:
ipconfig [/allcompartments] [/? | /all |
/renew [adapter] | /release [adapter] |
/renew6 [adapter] | /release6 [adapter] |
/flushdns | /displaydns | /registerdns |
/showclassid adapter |
/setclassid adapter [classid] ]

where
adapter Connection name
(wildcard characters * and ? allowed, see examples)

Options:
/? Display this help message
/all Display full configuration information.
/allcompartments Display information for all compartments.
/release Release the IPv4 address for the specified adapter.
/release6 Release the IPv6 address for the specified adapter.
/renew Renew the IPv4 address for the specified adapter.
/renew6 Renew the IPv6 address for the specified adapter.
/flushdns Purges the DNS Resolver cache.
/registerdns Refreshes all DHCP leases and re-registers DNS names
/displaydns Display the contents of the DNS Resolver Cache.
/showclassid Displays all the dhcp class IDs allowed for adapter.
/setclassid Modifies the dhcp class id.

The default is to display only the IP address, subnet mask and
default gateway for each adapter bound to TCP/IP.

For Release and Renew, if no adapter name is specified, then the IP address
leases for all adapters bound to TCP/IP will be released or renewed.

For Setclassid, if no ClassId is specified, then the ClassId is removed.

Examples:
> ipconfig ... Show information
> ipconfig /all ... Show detailed information
> ipconfig /renew ... renew all adapters
> ipconfi... Read more

More replies
Relevance 59.86%

Hi,

I've got a CAD program called 3D Canvas 7 - I've used it in the past but recently when I try to run the program it refuses to start and I get the error message:-

3D Canvas requires that Microsoft Windows Script be installed

As far as I can see Windows Script is installed as part of Windows 7 ?

I tried a fresh install of the very latest version of the above program which is 3D Crafter 9 (really a new program) - but again got the same result.

The only real change to my computer recently is a utility called TuneUp Utilities 2012 - I can't see any indication that it has de-activated the script - but I could be wrong of course.

I've tried a lot of internet searches on Windows 7 Script problems without luck.

Any help with this would be much appreciated.

Many thanks.

Regards
Paul

Answer:Error Msg:-Program requires that Microsoft Windows Script be installed

  
Quote: Originally Posted by rd84


Hi,

I've got a CAD program called 3D Canvas 7 - I've used it in the past but recently when I try to run the program it refuses to start and I get the error message:-

3D Canvas requires that Microsoft Windows Script be installed

As far as I can see Windows Script is installed as part of Windows 7 ?

I tried a fresh install of the very latest version of the above program which is 3D Crafter 9 (really a new program) - but again got the same result.

The only real change to my computer recently is a utility called TuneUp Utilities 2012 - I can't see any indication that it has de-activated the script - but I could be wrong of course.

I've tried a lot of internet searches on Windows 7 Script problems without luck.

Any help with this would be much appreciated.

Many thanks.

Regards
Paul


If the problem started after installing TuneUp Utilities, I suggest you try uninstalling it and test the results. I generally don't recommend 3rd party utilities such as this one because they are mostly nothing more than snake oil and have been know to cause more problems than they cure.

HTH

9 more replies
Relevance 59.04%

I am running vista home premium x64bit on a Dell studio xps. My wintv has stopped working..no signal being detected. Upon checking the device manager the only thing I can come up with is that the ISATAP driver has the yellow exclamation mark. There seems to be no reason for it to have stopped. Other threads give the Microsfot line as being just ignore the error 31 but the device doesn't work so how is that at all helpful? How do I fix this? Any ideas....anyone?

Answer:ISATAP driver for WinTV card

Try reinstalling your network adaptor(s) with the latest drivers.

ISATAP (Intra-Site Automatic Tunnel Addressing Protocol) is an IPv6 transition mechanism meant to transmit IPv6 packets between a point to another point.

You can also try right-clicking on ISATAP and uninstalling it, if it is still there after reinstalling the drivers for your network adaptor(s).

If you require any additional assitance, don't hesitate to pester me

2 more replies
Relevance 59.04%

Hi

The last few times I started my computer, the system comes with the warning:

"Windows requires a digitally signed driver
Driver: Broadcom NetDetect Driver
Service: BASFND
Publisher: Broadcom Corporation
Location: C:\Program Files\Bra...\BASFND.sys"

Windows suggests to uninstall the program or device that uses this driver and check the publishers support site to get a digitally signed driver.

The problem is that I have no idea of which program or hardware is using this driver. All the drivers I have installed in my computer are from the computer manufacturer.
I have also been at Broadcoms homepage and there is plenty of things to download there. But I dont want to ruin anything.

Suggestions on what to do?

System: Windows Vista 64
 

Answer:Windows requires a digitally signed driver

Broadcom is your onboard ethernet, I don't see why it would suddenly complain unless there was an update.:confused You can disable driver signing but it only cures the symptom and not the cause.
 

2 more replies
Relevance 59.04%

I recently purchased a new pc that came with win vista 64 bit premium home installed. I am now reloading all my old programs and I keep getting ?windows requires a digitally signed driver" error message. I also can't seem to play my old movie files, all of which played fine when I had Win XP. Apparently Vista does not want me to make my own decisions, so I am wondering how I might go about disabling all this extra secure vista crap. Can I go into Control panel and disable the BitLocker Drive Encryption? Or do I need uninstall 64bit and install the Vista 32 bit? Would that be a smooth transition? Would all my stuff work again if I had the less securitized 32bit Vista? Thanks for any help you may provide.
Regards,
William

Answer:windows requires digitally signed driver

Welcome to the Vista forums

1) You don't want to disable UAC (User Account Control) as it does a lot to protect your computer from various malware. If you really feel the urge to turn it off, then you can in control panel in the User Account section. Once turned off, you'll get the red shield in the bottom right saying it's disabled. Disable security warnings by opening security centre and going to "change how security centre warns me" or something and choose the "no warnings" option.

2) Just download the Vista codec pack (just Google it and you should find it) and DivX and you should have no problems watching videos.

3) You can install unsigned drivers on Vista 64 bit, do this by running an elevated command prompt (right click on command prompt in Start menu and click "run as administrator".

Type this and press enter bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS

When you reboot, you should be able to install unsigned drivers.
Also, I looked on the HP website for your computer, and it has 6GB RAM, so going to Vista 32bit would only allow you to use about 3.5GB RAM. I also saw it only has an Nvidia 6150e onboard graphic card. Are you using this? As if you upgraded this to a graphic card, you'd notice better performance on Vista as well.

2 more replies
Relevance 58.63%

My computer has for the past several weeks spontaneously crashed when it is running programs. When it crashes it says the following: a problem has been detected and windows has shut down to prevent further damage to you computer. If this is the first time you have seen this stop error screen, restart your computer.
DRIVER_IQRL_NOT_LESS_OR_EQUAL
If it appears again, check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturers for any windows updates you have need. If problem continues, disable or remove any newly installed hardware or software. Disable b10s memory options such as caching or shadowing. If you need to use safe mode to remove/ disable components, restart your computer, press f8 to select advanced starting option, and then select safe mode.
Collecting data for crash dump....
Initializing crash dump....physical memory dump complete.
When i restart the computer, a window stating that your computer has crashed pops up, and when hit repair, another window pops up stating that your network adapter is missing a driver. When i got to device managers and check out network adapters, it shows two. Microsoft ISATAP Adapter#7 , which has a yellow warning triangle next to it, and a realtek RTL8169/8110 Family PCI Gigabit Ethernet NIC (NDIS 6.0), which has no such triangle next to it. When I click on the Microsoft ISATAP and go to driver, it states that it was provided on 6/21/2006 and is drive... Read more

More replies
Relevance 58.22%

I have been having this issue with my pc Where when I open programs my screen goes black. Well I have booted my pc and the drivers that are installed are displayed as "Microsoft basic adapter" I am not sure why but. I am going to install drivers from the manufacturer of my graphics card and if it makes my issue come back how do I go back to having Microsoft basic adapter drivers

Answer:How to get back to microsoft basic adapter driver

Microsoft Basic Adapter are the ones loaded from the OS when no graphics card drivers are installed. It will be only enabled when you uninstall your graphics drivers and restart your computer.

1 more replies
Relevance 58.22%

Oh boy, I followed some wrong advice and uninstalled my Microsoft AC Adapter Driver, (I know), ''' now my laptop won't start. Absolutely nothing happens when I plug in the power source with or without battery, or just he battery alone.I had no issues prior to being advised to remove my Microsoft AC Adapter drive, except for my battery saying it was not charging. The advice I received included removing Microsoft ACPI Compliant Control Method Battery ans well as the Microsoft AC Adapter drive.Now I know it should have only been the Microsoft ACPI Compliant Control Method Battery.The question is, how do i solve this? How do I get my laptop to boot up again so I can install my Microsoft AC Adapter drive? Bit of a chicken and the egg situation but desperate for a solution.Laptop is Windows 10, upgraded from Win 8:HP Pavilion 15 Notebook PCProcessor type: Intel (R) i5-4200u [email protected] 8GBAny help would be greatly appreciated, thank you.

More replies
Relevance 58.22%

I have been having this issue with my pc Where when I open programs my screen goes black. Well I have booted my pc and the drivers that are installed are displayed as "Microsoft basic adapter" I am not sure why but. I am going to install drivers from the manufacturer of my graphics card and if it makes my issue come back how do I go back to having Microsoft basic adapter drivers

Answer:How to get back to microsoft basic adapter driver

Microsoft Basic Adapter are the ones loaded from the OS when no graphics card drivers are installed. It will be only enabled when you uninstall your graphics drivers and restart your computer.

1 more replies
Relevance 58.22%

Recently found a hacker program on my PC causing all kinds of trouble. Called Iminent. So far have been able to get rid of it but now I seem to have lost the above program - teredo tunneling adapter and cannot find a way to re-install it. Have looked at Microsoft but instructions are so confusing and I am not an IT wizard. Where can I find the driver for this adapter and how do I download it? thanks for any help you can provide.

Answer:Microsoft Teredo Tunneling Adapter Driver

Without getting to technical. Teredro tunneling adapter protocol. Is the ability to do ipv6 tunneling over ipv4. It usually is installed by default, but since you had issues you probably reinstalled your nic card and ipv6 wasn't installed. So you go to start, run & type in ncpa.cpl hit enter. This brings up your nic card adapters. If you have both a regualr wired nic and a wifi nic then you need to select which one you're using. Right click the adapter and to go to properties. The list is made up of client/service/protocol.
 
After pressing the install button you can select which type to install client/service/protocol In your case you want a protocol. After choosing protcol another list opens and you should see IPv6 in there. You select it and press ok/apply. If nothing is listed then you need to download the right driver for your pc.
 
Typically by default this is what you would see for a regular wired nic card after opening properties....
 
(client)
Client For Microsoft
 
(service)
PC Network Filter Driver
RRnetcap Driver
QOS Packet Scheduler
File and Printer Sharing for Microsoft Networks
 
(Protocols)
Internet Protocol Version 6 (TCP/IPv6)
Internet Protocol Version 4 (TCP/IPv4)
Link-Layer Topology Discovery Mapper I/O Driver
Link-Layer Topology Discovery Responder

4 more replies
Relevance 58.22%

Windows Vista x64 decided to implement a 'security measure' by which all drivers must be 'digitally signed' to be allowed to install and run. I have a program which is compatible with Vista and x64 bit operating systems, however as its drivers are not digitally signed I cannot run it correctly - I recieve the message 'Windows requires a digitally signed driver' and access to the driver is blocked.

Is there a method of bypassing this?

Answer:'Windows requires a digitally signed driver' - How can I bypass this?

When you boot your system hit F8 and you can bypass it there. You will have to do this every boot. There are a couple applications out there that will do this for you but the names escape me right now.

4 more replies
Relevance 57.81%

Is it possible to fit a second hard drive to my equium, i see the empty bay on the base but some components are missing to connect another drive?

Answer:Is it possible to fit a second HDD to Equium A200

What Equium series do you mean exactly?

7 more replies
Relevance 57.81%

Hi

I have just purchased an Equium A200-15i and wonderd if the fan should be going off as often as it is. Have just had to return my previous laptop to the shop as had the same problem with that one, in that the fan would go off every minute or so. Can anyone advise if this is normal as I have no idea!

Answer:Fan on my Equium A200

Hi there,

could you please explain what you mean with "go off". Where is the problem, is your machine crashing due this or is the FAN running constantly or what?

A better description would be make the answering much more easier, because no one understands sometimes each other. Remember, we are all not coming from the same country, the range between the people here is sometimes about 10000 Miles and no one speaks the same english.. :)

Greets

2 more replies
Relevance 57.81%

Good day.
I got a new PC, I installed windows 10 home edition, It worked fine until windows did update VGA adapter then it became unusable, I needed everytime to restore system to get it worked and loose anything I worked time after restore is created, I checked vga card and found it Microsoft Basic Display Adapter, My vga adapter card is built in on gigabyte motherboard with no information on drivers.

I need help to resolve this issue, I am attaching hwinfo of my Pc and waiting for kind help.

Specification file is attached.

Thanks.
 

More replies
Relevance 57.81%

I am using HP Compaq 8000 Elite Small Form Factor PC and the yellow mark in my device manager for Microsoft teredo tunneling adapter?
Does anyone know how to fix it? I cannot find the drvier for the above adpater in HP website.  Or is it downloaded from Microsoft?
I don't know when does it have this driver?  Some Windows 7 machine don't  have this drvier in the Device Manager.
Any advice for this?
 

Answer:Microsoft teredo tunneling adapter driver download

If you do not use US drivers and English language change it to that which you use. The link is to a US|English driver.
When you do not see the Teredo in the network adapter properties, you have not connected that computer to another on the LAN. It creates the IPv4 to IPv6 connection. It is a pseudo IPv6 network for higher security that Windows does automatically.

http://technet.microsoft.com/en-us/library/bb457011.aspx
http://technet.microsoft.com/en-us/library/bb457042.aspx
http://msdn.microsoft.com/en-us/library/aa965905(v=VS.85).aspx
http://search.microsoft.com/results.aspx?form=MSHOME&mkt=en-us&setlang=en-us&q=teredo

4 more replies