Computer Support Forum

Satellite Pro A300 - Webcam driver fails to start under Win 7

Question: Satellite Pro A300 - Webcam driver fails to start under Win 7

Recently purchased a Sat Pro A300 and immediately upgraded from Vista Bus to Win7 Pro.
Didn't try to use webcam before upgrade.

Post-upgrade, after downloading and installing Chicony webcam software from Toshiba, continually get message "Webcam driver open fail. Please restart camera or computer".
Camera appears in Device Manager and says driver is a Microsoft driver v 6.1.7600.16385 dated 21/6/06 (very pre-Win7!).

Have tried unistalling/reinstalling camera assistant software with and without first uninstalling camera in Device Manager, but same error message comes back every time. I'd much appreciate some suggestions re a fix.

Relevance 100%
Preferred Solution: Satellite Pro A300 - Webcam driver fails to start under Win 7

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Satellite Pro A300 - Webcam driver fails to start under Win 7

Hi

In your case I would try to install the latest webcam driver from Toshiba. Install this driver and try it again. Make also sure that latest BIOS version is installed for your notebook.

Furthermore it would be interesting to know if the same problem occurs on Vista. You should try it with factory settings. So you can identify if it?s a hardware or software problem.

1 more replies
Relevance 94.3%

it says "webcam driver open fail, please restart camera or computer"

i have done that but i dont know what else to do to fix it

please help i need it for an assignment in grade 12


all help is much appreciated

thnx

Answer:Satellite A300 - webcam not working, message says "webcam driver open fail"

Remove preinstalled version from the system and install latest version you can find on Toshiba download page.

By the way: which operating system do you use?

15 more replies
Relevance 94.3%

Hi

my laptop specifcation here : ( [A300 - 1G5|http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new=Yes&PRODUCT_ID=1055589] ) for any needed details ..

The problem simply is, the webcam stopped working for some reason, an error messeage says "Webcam driver open fail. Please restart camera or computer".

I noticed that whenever I put the computer in sleep mode I was getting on the icon tray a notification says "USB device unrecognized"... I wasnt aware what it was - thought it becasue of the USB mouse being plugged... but I think its related to the camera...

software is installed but camera is not working and cant enable it .. I did download the latest driver from toshiba site , but still not working ...


Currently my laptop runs Vista HP SP2 32-bit, Windows defender enabled, Windows Firewall Enabled, Windows UAC enabled, Kaspersky Ani-Virus 2009 Enabled. I only use Windows Live Messenger (which up to date I think , version : 14.0.8089.726) which i used camera with, I quite using face recognition long time ago and rarely use the webcam ... I didnt install or update any drivers and used to have the laptop running perfectly..

So what happened now ?!

Answer:Satellite A300-1G5: webcam stopped working - Webcam driver open fail

Hi

I have had a similar error message and could solve this by disabling the webcam software from startup.
In msconfig -> Start Up tab I have unchecked the Chicony webcam software.
This prevents it from automatic loading.
I don?t use MSN but Skype and the Chicony webcam software is always disabled (not executed) if Skype is running.

Maybe you should try this too.

Furthermore you could try this:
Go to device manager, mark the webcam (imaging devices ? USB video device) and deleted it from the device list.
Then reboot the notebook and wait until the webcam has been recognized again.

Then test it.

6 more replies
Relevance 94.3%

After looking through this forum, I have tried several 'solutions' but to no avail.

After trying to load the webcam i get the message: "Webcam driver open fail. Please restart camera or computer"

I have tried updating the Driver software for the camera, and updated the BIOS.

This message still keeps coming up. Is it worth uninstalling the camera completely then attemtping to reinstall it?


Sorry if some of this doesnt make much sense, im not entirely "computer savvy"


I hope somebody can help,

Thanks,
Ben

Answer:Satellite A300-1MC: webcam not working - webcam driver open fail

> Is it worth uninstalling the camera completely then attemtping to reinstall it?
Of course!

You should firstly go to device manager and should uninstall the driver.
You should also remove the software from control panel -> Software

After that you should clean the OS and registry using CCleaner. It?s free tool? google?
Then reboot the notebook several times and install the webcam software again.

Cheers

8 more replies
Relevance 90.2%

My Satellite A300 fails sometimes on start when showing a Toshiba logo.
I don't known why. Is there a key to show a p.o.s.t. tests?

Sorry for my English.

Answer:Re: Satellite A300 fails sometimes on start

Hi

You can switch in the BIOS the boot option from normal to fast.
I think this will disable the Toshiba red log and will show you the post screen.
But to be honest I have no idea if this could be help full.
Anyway, if the notebook fails to pass the POST then something could be wrong on motherboard; for example memory modules or similar?

3 more replies
Relevance 89.79%

Every time I start my Satellite A300-1G3, a pop windows pops on my screen saying "Webcam driver open fail. Please restart camera or computer"

At first I have restarted the camera and computer for like a million times, yet I keep receiving the message,
I, also, have reinstalled webcam driver, with no luck,

I have uninstalled camera driver and installed another one that I have downloaded, yet the problem persists.
What should I do to resolve this eternal problem?

Answer:Need webcam driver Satellite A300

Do you use original preinstalled OS from Toshiba (Vista) or your own OS installation?

8 more replies
Relevance 88.56%

Hey

I just have done format on my pc Satellite A300-15B from windows vista (32bit) to windows 7 (64 bit) enterprise Greek edition!! But my driver of webcam doesn't work.
At first it worked but the last 4 days it not. :( What can I do??

Thanks

Answer:Satellite A300-15B - Windows 7 and webcam driver

Hi,

Try it to reinstall. Before remove it, restart and clean registry with Ccleaner and install from:

http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

If you make a forum search you can find many threads about Webcam failure.

5 more replies
Relevance 88.56%

Hi,

I have a problem with my webcam driver just after installing Windows 7 on my Satellite A300-1LT, I had win XP before and it works fine. In downloads is offered just for xp, vista 32-bit and 64-bit driver (I tried all with same results). Webcam app starts with windows and gives me an error msg that I must reinstall or install new webcam driver. Webcam work in eg. skype buth with (very) poor quality.

I tried to find wich cam is integrated ( chicony? ) also but nothing.

Does enyone else had experienced this issue and know how to resolve it ? please help...

Answer:Satellite A300-1LT - Webcam driver for Windows 7

Hi glava11,

As far as I know you can also use the webcam driver for Satellite A500 because it?s equipped with Chicony webcam too.

So have a look for A500 downloads. There you can find Windows 7 driver for webcam that should work on your model too.

Check this!!!

2 more replies
Relevance 88.56%

HI...


I have Toshiba Satellite A300-146, Model no : PSAJ0E, 1GB RAM, Intel Dual core 1.87 processor, Mobile Intel(R) 965 chipset family.


Now I'm using Windows7 trial version..... I can install all vista drivers including webcam driver...I cant open Camera assistant software . If I open, it says "Webcam driver open fail. Please restart camera or computer" . though I can open webcam on yahoo messenger.......


How should I open Camera assistant software...?


Help me..

Answer:Satellite A300 - webcam driver and Windows7

As you already wrote Windows 7 is ?trial version? only and it available for testing purposes only.
So, Toshiba didn?t start support for this OS and with such issue nobody can help you.

Drivers, tools and utilities on Toshiba download page are not designed for Windows 7.
I have also preinstalled Windows 7 on my Satellite P300 as second OS for testing.

2 more replies
Relevance 88.56%

Hello, I'm looking for drivers about my web camera.
My model is Toshiba Satellite A300. In the official page it doesn't have drivers for web camera in windows 7.


Thanks

Answer:Need Win7 webcam driver for my Satellite A300

I have A300 with Win7 32bit preinstalled on it. I had the same problem and I?ve installed webcam driver offered for A500. It works perfectly. You can do the same.

Test it and send some feedback.

2 more replies
Relevance 88.15%

Hi, Hope someone can help.

Laptop stopped working - keeps trying to fix problem via windows on start-up but this just hangs for hours so I ordered a recovery disc to start a fresh as I believe the original problems were caused by a virus. I have no important data to keep so am OK with clearing everything and restarting. Today. I have just received my Product Recovery disc that I ordered from Toshiba. I follow the instructions; load disc, power on holding C. Then it just continues as if the Recovery CD wasnt in the drive. The CD drive doesnt spin. Its as if the laptop doesnt recognize the disc.

Any ideas?

Answer:Satellite Pro A300 - Recovery disk fails at start

Hello

Well, either i?s something wrong with recovery disk itself or the drive doesn?t detect the disk properly?

What happens if you access the BIOS boot menu (F12 key) and select CD/DVD drive as boot device?
If it doesn?t work try another bootable disk to make sure the drive is working properly.

7 more replies
Relevance 87.74%

Hello

I'm Dr Ahmed Maher and I have a problem with my Toshiba Laptop. It is Satellite A300

The problem is in my webcam. When I try to use the webcam a message of "webcam driver open fail.please restart the cam or computer"
I had downloaded the driver from toshiba site. I reinstalled the driver but the same message appeared. I had updated the BIOS. The same problem. I made a recovery for my laptop using the recovery DVD. No way, the same problem

Please help me to solve this problem
thank you for caring
Dr. Ahmed

Answer:Satellite A300 - Webcam driver open fail

Hi Dr. Ahmed,

If your webcam doesn?t work after installing Windows from Toshiba recovery disk I think it?s related to defective hardware. I mean you have already tried to update the BIOS and webcam driver but that?s all what you can do.

So I would recommend contacting the people from your local authorized service provider. I think they can help you can exchange the webcam if it?s necessary.

1 more replies
Relevance 87.74%

Hi there

I have Toshiba A300-1MM laptop and my Web Camera does not work. On toshiba support site there is no driver for Windows 7 32bits. Only for Vista 32bits. I use this driver. Is there any other sollution?
Thank you.

Answer:Webcam driver open fail - Satellite A300-1MM

Hi

I was able to find the webcam driver for Win 32bit for this series.
Install the mentioned driver, reboot the notebook and test the cam once again.
[Webcam driver v 1.7.260.0526|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=781&selSho rtMod=null&language=13&selOS=all&selType=315&yearu pload=&monthupload=&dayupload=&useDate=null&mode=a llMachines&search=&action=search&macId=&country=al l&selectedLanguage=13&type=315&page=1&ID=68798&OSI D=29&driverLanguage=42]

3 more replies
Relevance 87.74%

As advised I have reloaded the webcam driver and updated BIOS but I still get 'webcam driver open fail' message on startup on my Satellite A300.

Answer:Satellite A300 - Webcam driver open fail

Hi buddy,

Here in forum you will find some threads about this issue? Just use the forum search a little bit.

Regarding the driver: If you remove the old version, restart your computer and run CCleaner to clean the registry and fix issues. Then restart again and now you can install latest webcam driver from official Toshiba page.

Good luck! :)

2 more replies
Relevance 87.74%

I try try to solve my problem

Error: webcam driver open fail

http://img442.imageshack.us/img442/5706/hsd36352.jpg

Answer:Satellite A300-20A - webcam driver open fail

Hi

You should use the Toshiba Forum search option.
Then you would find a lot of threads about the theme.

In most threads you will find the recommendation to reinstall the webcam software.
I think this should help you.
So visit the Toshiba driver page and download the webcam software for the notebook model. Before you would install the new software, I recommend removing the old from the system.

4 more replies
Relevance 87.74%

Hello!

I need someone to help me.

I have a Toshiba Satellite A300-276 with built-in webcam.
The operating system that came when it was purchased windows vista, but lately for some reasons had to format and then took the time to install win 7 (32bit).

But the webcam does not work.
The program, the drives and does not work.
When I click to connect to web a warning appears saying +"Webcam driver open fail. Please restart camera or computer+ "..
I've rebooted, uninstalled and went back to install and does not work!

Does anybody have any idea how to solve this problem?

Thanks.

Answer:Satellite A300-276 - Webcam driver open fail

Hi

This is a typical software issue?
I read a lot threads about this error message and in most cases new driver installation/update did the job!

Please ensure that you are using the latest BIOS.
Then access the device manager and go to Imaging Devices.
There you can find the USB video device? this is webca.

Please remove this from device manager list. You can also uninstall the driver?
Then reboot the unit and try again to install the driver?

Please be sure that you are using the latest webcam software... you can choose the software released for Satellite L500 too!

3 more replies
Relevance 87.74%

Hi to everyone.

I have a Toshiba Satellite A300. It's eight years old but I'd like to keep working with it.

When working, it felt to the floor and the HD was damaged. I replaced it.

Now I've just installed Windows 7 x64 (before, it had Win XP x86). I installed all drivers from Windows Update and everything works fine, except the webcam.

Software which use the cam say "No cam present". I even installed the driver from the Toshiba support page (an exe which automatically downloaded a couple of drivers), but the cam keeps not working.

After this I've begun suspecting that the camera broke when it falled. So I'd like to know how can I do to test if camera is attached to the system bt the OS is being unable to communicate with it because of driver problem, or if the camera is broken and the laptop itself doesn't recognize it. Does it exist any toshiba hardware detection software? A report software? Or may I try something like AIDA64, in which section may it be listed? Or can I see in the windows device manager?

Any help will be appreciated.

Answer:Satellite A300 - Webcam broken or driver error?

To be honest I also believe there is hardware related issue. On this virtual way it is not easy to say where is the problem exactly. It can be camera itself or cam cable.
What to do? In my opinion notebook must be disassembled and you must check cam cable connection.
> Does it exist any toshiba hardware detection software? A report software?
Not for user like you and me. Such software is probably offered for service providers only. Theoretically when you use such software and it reports that system is not detecting the cam you must disassemble the machine and check it.

4 more replies
Relevance 87.74%

Tried to work with my camera, but error appeared "Webcam driver open fail. Please restart camera or computer" Tried to do both, nothing happened. Changed drivers for camera, the same problem.

My OS is Windows XP SP3. Can anybody help me?

Answer:Satellite Pro A300-1NH - Webcam driver open fail

HI rinat_1,

Was your Satellite A300 delivered with Windows XP? If not, try it with ?factors settings? again, please!

Make also sure that your BIOS version is the latest one and you can get it here:
http://eu.computers.toshiba-europe.com/ > Support & Downloads > Download Drivers

Good luck! :)

1 more replies
Relevance 87.74%

Every time I attempt to start up my integrated webcam (Chicony Camera Assistant Software) the message "Webcam driver open fail. Please restart camera or computer." pops up on the computer.
Firstly I do not fully understand what this means and secondly I have restarted both the camera and the computer, as well as repairing the camera software.

I have looked for updates and drivers, etc but to no avail. I have also read every user manual available in search of an answer but I can?t seem to find anything that is of any help.
I was just wondering if anyone had an answer for me or could tell me what I need to do.

Answer:Webcam driver open fail on Satellite A300-1MC

hi Jacktt615,

first of all check if the devicemanager shows a "usb-video-device" from chicony without exclamation mark...
if the hardware is detected and usable check the driver details:
my drivers for this device are: ks.sys, usbvideo.sys, uvcftr_s.sys, iyuf_32.sys, ksproxy.as, kstvtune.ax, and among some others, vidcap.ax

if you have more than one chicony video device: delete all and reboot
download the latest webcam-driver from toshiba, it contains the driver and the software.

5 more replies
Relevance 87.74%

After disc format (T HDD recovery, Vista 32 b) there is no "toshiba face recognition" aplication.
After instaling Camera Assistant Software there is only error: Webcam driver open fail. please restart camera or computer.
Camera is turned off and i can't turn it on, restarting the computer doesn't give any effect.

Could anyone help me?

Answer:Satellite A300-1EH - Webcam driver open fail

Hi

I see you are using Vista?
Well, first of all you should ensure that Vista is up to date!!!
You have used recovery and this means that Vista needs to be updated to the latest state!!!
All service packs and other patches needs to be installed.

Then remove the webcam software from the system, clean the registry (CCleaner, etc?) and after new reboot try to install the webcam software again?

1 more replies
Relevance 87.74%

A while ago i bought A300 and everything was working fine till one day i tried to run the camera Assistance software and this msg came up "Webcam driver open fail. Please restart camera or computer."

I didn't know what to do so i decided to uninstall the software and install it again but in vain.
Since then when ever i try to run my cam even on the msn it runs but it tuns all black after a while.

Please help

Answer:Satellite A300-1EI - Webcam driver open fail

Is also black when you start ?Camera Assist Software??
MSN is not the best application for diagnostic?

Have you tried to play with settings and night mode option?
Have you removed protect foil in front of cam?

3 more replies
Relevance 87.74%

Have updated my system to Windows 7. Used successfully the drivers from support page. cannot find the right webcam driver.

What is to be done?

Answer:Satellite A300-1RJ (PSAG8) - Webcam driver for Windows 7

Hi

You can find all drivers on the Toshiba page:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

At the moment there is no Windows 7 driver for webcam but you can try the Vista driver. Does it work?

If not you can download the Windows 7 driver for another A300 model. Normally it should also work on your model.

Good luck! :)

1 more replies
Relevance 86.92%

'Webcam driver open fail.' My webcam failed months back. Have been into forums & taken advice - nothing works.
Have cleaned disk and reloaded driver many times. This is not satisfactory.
Someone must take RESPONSIBILITY.

I need to know the CAUSE and get a SOLUTION.

Answer:Satellite A300-1MC - Webcam driver open fail - Vista

Hello John and welcome to Toshiba forum.
Let us discuss about responsibility a little bit later.

Tell us at first which notebook model do you have exactly, which operating system do you use and what have you tried to fix this.

7 more replies
Relevance 86.92%

I had to replace the hard disk on my A300 PSAJ4E and when I reloaded Vista 32 and all the Toshiba hardware drivers all went OK except for the Chicony webcam install.

The side menu is there but it won't work, giving a "webcam driver open fail. please restart camera or computer" error.

I updated the Bios to 4.20
I first used the original Toshiba download, webcam-20080428125023 driver (V1.07.175).
I tried it with "the lid 3/4 closed".
I searched everywhere and read of dozens of similar problems. I tried a few, even editing the setup ini. Nothing helps.
I've even tried the XP drivers (V1.7.144.0611), the 32bit and 64bit versions and even a gateway driver. Nothing seems to work for this cam.

What now?

I also now get "the required section was not found in the INF" when I try to uninstall and reinstall the driver through device manager.
I have the choice of
6.198.1.0
6.2.208.424
6.2.238.1217
all giving the same error...

Answer:Re: Satellite A300 (PSAJ4E) - Webcam driver open fail

Me too. See my thread of a couple of days ago.
I have given up. I have wasted hours and hours trying to get the webcam driver to work.
Next week I am going to buy an external webcam.
There are many complaints about this in various forums, I think it is time someone took responsibility.
Sorry that I could not be positive and help you.

11 more replies
Relevance 86.92%

Hi,

I have a Toshiba Satellite A300-1SM computer upgrade to Windows 7 (32 bit), and since yesterday, the webcam is giving me problems. Does not work.
Is a Chicony Web Camera, built inside the computer. Has suddenly stopped working. The following error appears: "webcam driver open fail. please restart camera or system. "
I have not touched or installed anything. It happened overnight.

I tried to restore the computer to an earlier date, and it worked for a few minutes ... but it failed again and appears the same error.

I wonder what I have to do to get back to "recover " my webcam.

Thanks in advance.

Greetings

Answer:Satellite A300 - error: "webcam driver open fail"

Hey,

There are a lot of threads here in forum about webcam driver issue and you should read these threads:

http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=233048&#233048
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=232084&#232084
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=233417&#233417

Problem is I can?t say more about this because the error never happened to even I use my webcam quite often but no problems at all. :)

Anyway, if you have more questions you can post again ;)

2 more replies
Relevance 86.92%

Hi

I have Satellite Pro A300
After upgrading XP into Vista the web cam stopped working (webcam driver open fail. please restart camera or computer)

Any help

Answer:Satellite Pro A300 - error - webcam driver open fail

Hi!

I have used the forum search and founded a good posting from the user Akuma.
Maybe it?s the solution:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=136549

Good luck!

Bye

1 more replies
Relevance 86.1%

All greetings.

Recently took the laptop with the service center, he changed the motherboard. Prior to the service center the camera worked well, but after he took early displayed an error "Webcam driver open fail. Restart camera or computer." Read posts on this subject anywhere advised to update the BIOS, I renewed but nothing helped.

This could be due to the fact that in the service center have forgotten something to connect to the motherboard? Because in the Device Manager do not see a web camera. I have a Toshiba Satellite A300-1EG number PSAG4E.

Thanks in advance for the answer. I would like to be quick to get to know to go tomorrow to a service center or not.

Answer:Satellite A300-1EG - Webcam driver open fail after mainboard exchange

Hi kuhar2007,

Maybe the authorized service provider has forgotten to connect the cable but before you contact them again you should try reinstalling webcam driver. You can get the latest version here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

Normally the webcam should be listed in device manager after this. If not you should contact the ASP again. Explain this problem and they will try to help you. ;)

2 more replies
Relevance 86.1%

Greetings

I recently did a clean install of Windows 7 64 bit on my Toshiba Satellite A300-1FP. I was surprised at how smoothly it went. The only thing that was missing was a Windows 7 driver for the Chicony Webcam. A number of people on these forums have suggested using the Vista 64 bit driver. I tried numerous times to make this work. I deleted the startup entry, deleted and resinstalled the driver from device manager, etc. Everything I have found on these forums I've tried.

None of it works. I continue to get the error message "Webcam driver open failed. Please restart camera or computer."

Even with the "camera assistant" the Chicony camera is really awful. Had I know before I bought the machine I would have chosen otherwise. Too late now. Without the assitant you have only the driver that comes with Windows 7 which allows you to use the camera but unless you have Hollywood quality lighting the video is so dark that it is nearly unusable. The "camera assistant" at least had a booster for darker rooms.

I don't know why Toshiba ever used this camera in the first place.
There are many people with this same exact problem who are looking for help in the various forums for their system.

If anyone knows how to handle this I would really appreciate hearing from you. Toshiba, if you're listening, what were you thinking?

Dave

Answer:Satellite A300-1FP - Chicony webcam Win 7 64bit - driver open failed

Hello

Just a little question: Have you tried this?
[Why an error message displayed "Webcam driver open fail. Restart camera or computer"?|http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=18]

Furthermore it would be interesting to know if the same happens with ?factory settings?. Can you check this please?

Greets

5 more replies
Relevance 86.1%

Hello,

Since I upgrade my system to Windows 7 64bit my webcam don't work. After installing the driver I keep getting the message "webcam driver open fail. please restart camera or computer". The camera also don't appear in the device manager and the mic don't work also.

I have a Satellite A300-1LT.

help!

tal

Answer:Satellite A300 - Webcam driver open fail after Windows 7 upgrade

Hi pro.surfer,

Do you know the forum search? If not you should use because you will find many threads with this error message and a lot of useful instruction what do to.

I don?t know which driver you mean but you need the Camera Assistant Software for webcam. The microphone is a part of webcam so you have to install the webcam driver. ;)

5 more replies
Relevance 86.1%

I have searched and searched for solutions to this problem and feel like I have tried everything. Whenever I turn my laptop on or attempt to start my webcam I get the error "Webcam driver open fail. Please restart camera or computer."

I used to be able to use the webcam with no problems but it just stopped working one day. I've recently reformatted my operating drive to the out-of-the-box state, but it is still showing an error whenever I try to use my webcam. I'm running Windows Vista Home Premium on an A300 Model: PSA-GCA. I have also tried updating the webcam driver (and the latest BIOS update) from Toshiba's support section, but with no luck. I've also tried using the XP webcam driver, but still, no luck.

Any idea on how to fix this problem?

Message was edited by: Replicant

I also forgot to mention that in my Device Manager, I cannot see my Chicony Webcam at all. There is no section for imaging devices present at all.

Answer:Satellite A300 - Constant "Webcam Driver Open Fail" Error

Hi

If you search here in the forum you will find enough threads about this issue but I have founded an interesting thread with a good posting from the user Akuma and mayb it?s useful for you:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=136549

If it doesn?t work I think you need help from an authorized service provider. The technicians can check your notebook and repair it if?s necessary.

Good luck!

5 more replies
Relevance 84.87%

Problem:
Recieve error every time I try to use Camera Assistance Software for Toshiba: Webcam driver open failed. Please restart camera or computer. Web cam also does not work in Skype. It seems that this is a very common problem with the A300s series, yet there is no clear solution out there.

Hardware
Series: A300
Model: PSAGCA -02Y010

Software
Operating System: Windows 7 64-bit
Camera Assistant Software for Toshiba: 1.7.175.0123

Details
I recently did a clean install of Windows 7, updating from Windows Vista. I never used the web cam on Windows Vista, so I can't testify as to whether the web camera was workin correctly or not. However, when I tried to use it with Skype, it did not work. I reinstalled the driver that I backed up before I installed the new operating system, but it did not work. The web cam doesn't show up at all in Device Manager - even when set to display hidden devices. Trying to add new hardware through the control panel fails to detect the web camera at all. I have restarted after every install/repair of the driver.

Steps Taken

Reinstalled backuped drivers
I used third party software (Double Driver) to back up and reinstall the drivers for the web camera after I installed Windows 7. Double Driver claimed there was no device to install the driver for. I manually copied the files into the Camera Assistance folder and overwrote the existing ones. The files I copied were:
casflr.cat
oem34.inf
restore.ini
UVCFTR_S.SYS

Reinstalled... Read more

Answer:Satellite A300 PSAGCA -02Y010 - Error: Webcam driver open failed

> The web cam doesn't show up at all in Device Manager - even when set to display hidden devices.
> I encountered a thread post that suggested a loose wire was responsible and that the camera would work when the lid was almost closed. I tried this and the camera suddenly appeared in device manager.

Does this mean that webcam does not appear in device manager if the lid is open? Right?
In such case it looks like there is no connection between webcam and motherboard.
As far as I know the internal cam is connected to motherboard?s USB controller and possibly there is a loose connection.

Possible solution: I think the technician should disasemble the notebook in order to check the connection :(

8 more replies
Relevance 82.41%

Hi,

I'm trying to use the Web Camera that came with laptop, it's a Satellite Pro T110-11L.

It's running Windows 7 64 bits, and I've already tried to install web camera drivers for Windows 7 64 bits and even the XP version that Toshiba site has on drivers page.

Both web camera drivers fail when installing giving the error "DMICheck Application stopped working".

Can you help?

Thanks,
Hugo Figueira

Answer:Webcam driver fails to install using Win 7 64bit on Satellite Pro T110-11L

Hello Hugo

According notebook specification your T model was delivered with preinstalled Win7 64bit Professional. Original recovery image contains preinstalled webcamera software and it is set to start automatically so I would like to know since when you have noticed this problem.

I cannot imagine this problem persists from the day one. Am I right about that?

Do you still use original preinstalled OS?
By the way: THIS is the right webcam driver for your notebook model.

7 more replies
Relevance 73.39%

Hey,

I recently bought Toshiba Satelitte A300-231 laptop, and I can't use webcam.
I installed "Chicony-Camera-Assistant-Software" and it says "Webcam driver fail. Please restart camera or computer".

My OS is Windows 7, so what I need to do? Thanks :)

Answer:Can't use webcam on my Satellite A300

>... what I need to do?
You need to wait until Toshiba starts Win7 support and offer driver designed for Win7. All offered drivers will be tested.

Which driver you have installed now? Vista driver maybe?

7 more replies
Relevance 73.39%

Hi there

I have installed Windows 7 home premium in my laptop (it had windows Vista) and ever since I can't use my webcam.

It doesn't appear in device manager and I have install and uninstall many times the drivers but every time I see the message that says that the camera is either disconnected or destroyed and restart the camera or the computer.

Is there a way to solve this problem?
Thanks in advance.....


My laptop is Satellite A300-20W with model number PSAGCE-09N00DGE and serial number 29353297Q

Answer:Cannot use webcam on my Satellite A300

I have Satellite A300 too with two HDDs inside. On second one I?ve installed Win7 32bit and webcam works perfectly so I?m really wondering what the problem can be.

Are you 100% sure webcam works properly with original Vista recovery image?

7 more replies
Relevance 72.57%

I'm having the problem with my built in webcam on Toshiba Satellite A300.
I have Windows 7 and just downloaded latest Win 7 driver for Camera Assistant Software.

Camera software will still not allow me to open camera - keeps saying "Webcam is either disabled or has failed.
Please check your webcam settings

Answer:Satellite A300 - webcam does not work

Hi

Did you try to reinstall the webcam software?
Try that?

You should also go to device manager -> Imaging Devices
Here you should see the USB webcam (internal webcam)
Check if it?s not disabled.
If yes, enable this: choose this device and point to the button ?enable? (at the top)

1 more replies
Relevance 72.57%

Satellite Pro A300 - How do I turn on my webcam on? Operating windows 7. The whole computer is clean.

Answer:Satellite Pro A300 - How do I turn on my webcam on?

Hello

The webcam can be used with communication programs like Skype where you can make a video call. Of course there are other messengers or programs they use the webcam.

But you have to install the webcam driver/software that you can use it. This software can be downloaded on official Toshiba website (Camera Assistant Software):
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

2 more replies
Relevance 72.57%

hi all

i was just wondering if there was some one out there who could help me...

i recently bought a A300/V01 and am trying to use the web camm for it, but when ever i open it on its own (not with msn or any other programs) it freezes and wont work, and when i try to send my web cam on msn it tells me that there was no web cam connected.
i pretty computer illiterate so iv tried to fix it myself but depressingly failed.

so if there is some one out there that knows how to fix this that would be awesome if you could help...

thank you xoxo

Answer:Satellite A300-V01 - webcam won't work with msn

Go to the Toshiba website and update the Camera/Webcam driver.

Also try closing/exiting the Camera Assist software.

You should also install Vista Service Pack 1 (SP1), if its not installed.

And ensure MSN Messenger is updated to the latest version.

1 more replies
Relevance 72.57%

Hi,

About a month ago my webcam stopped working. I tried various solutions and then formatted my hard drive, installing a 32-bit Windows 7 Home Premium. I still can't get the webcam to work. Could you please advise?

Kind regards,
Witek

Answer:Satellite Pro A300-1EA webcam not working

Do you get any error messages?
What happens starting the webcam software / application?

2 more replies
Relevance 72.57%

I recieved my laptop via my uni so dont ahve amyn of the back up disks ( especially not the webcam one).

Basically my laptop found a trojan horse virus on my webcam, sorted it out and I restarted my computer. It then flashed up wehn restarted that I need to install my webcam but I dont have the disk and now I cant use my webcam! What do I do?

P.S I'm not a computer genius so please be easy on me with the langauge.

Answer:Satellite Pro A300 - How to install the webcam?

Hi mate,

If you have to reinstall the webcam driver you can download it on the Toshiba website and all other drivers for your notebook:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

I have Satellite Pro A300 too and it?s not delivered with Toshiba recovery disk because you have to create such a disk yourself. Therefore start the Toshiba recovery disk creator that is preinstalled on your notebook and then you can create this disk. It contains an image of ?factory settings? and so you can restore the whole system every time.

1 more replies
Relevance 72.57%

A week ago the above notebook had a motherboard failure (fried component) whilst I was on skype with my webcam in use. A technician managed to fix the motherboard and now the notebook is fully operational except for my integrated webcam which the computer can no longer detect.

The technician has suggested that he may have forgotten to clip the webcam cable back into it's motherboard slot when putting the notebook back together. Since I am capable of dismantling the majority of my notebook I hope to check for this myself to save the two hour round trip to the computer shop again. Does anybody know where I should look within the notebook (illustrations would be great) to check the webcam connection with the rest of the computer?

Alternatively, could it be possible that my webcam broke during the original motherboard failure since it was being used when my motherboard failed? I also checked for update drivers in the toshiba website but couldn't find one for my notebook for Windows 7 64bit.

Note I had Windows 7 64bit before the crash so I don't think this is a software issue as with many other A300 Webcam problems posted on this forum.

Thanks for reading, I hope you can help!

Answer:Satellite A300-1OM webcam failure

> Does anybody know where I should look within the notebook (illustrations would be great) to check the webcam connection with the rest of the computer?

Since the webcam is a part of the lid frame and all the cables would be placed behind the plastic cover, you would need to disassemble the lid to get access to this cables? but don?t ask me for details because I?m not A300 owner but only the U400 which is equipped with such webcam too?

However, in your case I would not risk any notebook damage which can happen due to wrong disassembling!
Maybe it?s better idea to make a short trip to service?.

> Alternatively, could it be possible that my webcam broke during the original motherboard failure since it was being used when my motherboard failed?
This is possible too? but in such case the technician who replaced the motherboard should be responsible for that?

2 more replies
Relevance 72.57%

Hi guys,

I just wondering about in Vista Business. After I repair my computer mode and after done that, how come my *webcam* gone no where, my card reader did not work at all and some apps gone too. So what should I do?

I'm using A300/y00 Satellite

Answer:No webcam after repair my Satellite A300

Wait a moment Mickey. I don't understand what you mean with ?repair my computer?.
What you have done exactly?

5 more replies
Relevance 72.16%

An error box pops up when I try to start InsydeFlash program. The error is "IHSI: get support mode fail in SMI !" I click on OK. Another box pops up labelled InsydeFlash and it says "BIOS did not support InsydeFlash! OK." Upgrade closes without going any further. Notebook - Toshiba Satellite A300 PSAJ0E-00V00NRU.

BIOS file *bios-20091104120011.zip* downloaded from the official website. Current BIOS version - 1.8, OS - Windows Vista Home Premium SP2.

How to update BIOS?

Answer:Re: Satellite A300 - BIOS update fails

Hi

Did you load the default settings in BIOS before you started the update?

If you update the BIOS make sure that you are logged in as administrator and unzip all files from the zip archive before you start the update.
Close all running programs, also the firewall and antivirus and try to update again.

By the way: Why you want to update the BIOS? Is this really necessary?

12 more replies
Relevance 71.75%

Hey sorry if this question has been asked before, until recently my webcams been working recently I've been getting the following Error message *'Web driver open fail. Please restart camera or computer'.* I've tried doing both and no result, was wondering if anyone has had this issue and resolved it.

Cheers

Answer:Satellite A300/A300D Webcam Problems

Hi,
You should try reinstalling the software for the webcam. You should be able to download the software via the below link.
[http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU]

Regards
Ben

1 more replies
Relevance 71.75%

Hi guys
Here?s my problem.

I have a Toshiba Satellite A300-276. I always had the webcam appear on my desktop every time I iniciated my pc. I installed Windows 7, and it continued working great by suddently it stop appearing!

Once with Windows Vista, this also happened but I was able to figur it out! Now, I tryed and I couldn?t solve anything.

Any Thoughts?.
P.S, it?s a "built in" Webcam lol
Just Saying.

Answer:Satellite A300-276 - Webcam doesn´t appear when the computer is on

Hi buddy,

I?m not quite sure what you mean but if you the problem is related to internal webcam I would recommend reinstalling the webcam driver from official Toshiba website. Usually it solve the problem so check the Toshiba page:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

If it doesn?t work, just post again. ;)

2 more replies
Relevance 71.75%

Hi!

I've got a Satellite A300-1NO laptop, with Win 7 installed. My problem is, that my webcam doesn't always work, when I want to use it. Sometimes, it works perfectly in Skype, WLM etc..but sometimes i see a blank or a black screen, with a "loading circle" in it. The blue LED is lighting, i can see it in Device Manager too, but there's no picture, just "loading". I tried uninstall the driver, then reinstall it, I installed the newest "Camera Assistant for Toshiba", without luck.

Is there any solution for this?

Answer:Satellite A300-1NO - webcam doesn't work, but LED is ON

> Is there any solution for this?
I don?t think there is solution for this. If I understand you right there is some problem with preinstalled software. Why this happen is not easy to say.

I have Satellite A300 too and use it with Win7 32bit. Webcam is working properly all the time.

One more thing: have you noticed this issue from the first moment after Win7 installation or later?
Have you installed something that can be reason for this?

5 more replies
Relevance 71.75%

Hi

I have a Toshiba A300-233 laptop and because of a virus problem had to format my computer.
I have recovered most of the drivers but I am not able to find the built-in camera drivers anywhere.
I have the Windows Vista 32 bit OS.

Please help as I am unable to use my camera. I have tried alternate drivers but they don't work either.

Hope to hear back from you soon.

Thanks.

Answer:Satellite A300-233 webcam does not work and no drivers are available

Hi mate

The A300-233 belongs to PSAGCE series.
The drivers for this series can be found on Toshiba European driver page.
http://eu.computers.toshiba-europe.com

I found the webcam driver for Vista 32bit there? Webcam driver from Chicony v 1.7.193.0508

1 more replies
Relevance 71.75%

The web the chamber doesn't work, reinstalled drivers some times, doesn't help with the list of devices of the chamber isn't present.
What to do?
Sattelite A300 psag0e

Drivers web cam - 20080616124250

Answer:Satellite A300 - Webcam don't run and isn't listed in devices

Hi maestro2118,

Since when do you notice this behaviour and what operating system is installed?

Before you install or reinstall any driver, I would recommend removing the old driver first. Then restart your notebook and run CCleaner to remove old registry keys. One restart more and you can install newest webcam driver from Toshiba page.

Check this!!!

1 more replies
Relevance 71.34%

Hi,

I'm running a new Satellite A300, Vista Home Premium.
I wasn't able to run PC-Diagnose and the volume button wasn't working so I uninstalled the existing value added package, restarted the system and tried to reinstall with the latest version.

The install failed. I tried about four times with three newly downloaded files.

Is there anything I can do to get the install to complete?

Thanks,

Dave

Answer:Satellite A300 - Value Added Package install fails

Hi

I?m not quite sure why you are not able to install the VAP.
I was successful to install it.

As mentioned, you have to uninstall the old version, then download the new, right version from the Toshiba page and execute the exe file.
That?s all?

In many cases such issues is NOT related to the applications which you are trying to install but to the Windows OS?. mostly it?s muddled up and therefore such installation fails.

In your case I recommend cleaning the OS using the CCleaner and if necessary to reinstall the OS in order to fix this.

4 more replies
Relevance 71.34%

Hello
After installing Windows 7 64-bit
Webcam do not have Software for the operating system Windows 7

Model : Satellit A300 PSAG8E

Thank You

Answer:Webcam driver for Satellit A300 PSAG8E

Hi

Did you try to install the webcam driver released for other Toshiba notebook series?
For example the webcam driver for Win 7 can be found in the Satellite A300D driver area.

Check this one.

3 more replies
Relevance 70.93%

After my windows Vista system crashed on Dec 16 2011, I had the recovery done.
After that, I didn't find any webcam driver on the whole laptop. On the support page of Toshiba I finally found version 1.7, but that doesn't work at all!

It always shows up: Webcam driver open fail, please restart camera or computer. As it is a built in camera I tried it with the restart of the computer, but that didn't help at all. So I tried it with the option to repair the driver with Install Shield Wizard. The program has done something, but without any success.

So I uninstalled it and reinstalled it and it didn't help at all!

Has somebody an idea?

Answer:Webcam on Satellite A300-1MX doesn't work properly

Hi

Found a Toshiba knowledge base article which describes this error and provides a solution to this issue.
+Why does the error message display: "Webcam driver open fail. Restart camera or computer."?+
+http://aps2.toshiba-tro.de/kb0/OPT84026F0000R01.htm+

But its related to Portege M600, and Satellite U300 only.
However, you should also try to perform a BIOS update. After that set the BIOS to default settings and save the changes?. Then try to reinstall the webcam software once again.

You should also check the device manager. Here in device manager the webcam should be recognized as a USB device? if this is not the case then this means that the webcam has not been recognized by OS and this means that there could be an hardware issue?

As far as I know the webcam is connected to the USB controller on the motherboard. If the cable connection is lose, then the webcam would not be recognized in device manager; neither as USB device nor an unknown device.

1 more replies
Relevance 70.93%

Hi,

I have toshiba laptop Satellite A300, It had windows vista installed in this laptop but i formated and installed Windows 7 and since i have installed this windows 7 my webcamera is not working it gives an error "webcam driver open fail.please restart camera or computer" and even after doing this its not working.

And after installing this windows I think the display setting is also out of order, I tried to install the sorftwares and drivers from toshiba support but no success.

I need help to solve this issue.Please help

Thanks in advance.

Hope to hear soon.

Answer:Satellite A300 - Webcam not working since I installed Win7

Hello sajjad

I?ve made very good experiences with Satellite A300 and Win7. In front of me I have Satellite A300-1LI. It is PSAG8E model and I can confirm that everything works perfect.

I have one offer for you:
Send us please exact notebook model and we can check Toshiba download page to see what is available for Win7 for your notebook model.
I can also send you exact installations order how to install all Toshiba stuff.

Please let us know what you have done to get camera work.
Let us know how you have installed Win7 and all Toshiba stuff (drivers, tools and utilities).
Do you have some other issues with Win7 on your Satellite A300?

See you :)

6 more replies
Relevance 70.93%

Hi.

Well. Contacted Toshiba Australia. and got some information.
Well, the person I spoke to said that he would try to find the drivers on the Toshiba European website, which he did. And he said to uninstall my camera assist software.
So I did, downloaded the new version, installed it. But i am still getting problems, saying that windows vista home premium, a USB device, is not functioning and windows cannot recognize it.
And also, got a driver error still, saying to either open the driver software or restart your computer.

Went to the Toshiba forums, and had a look, did post on their, but could not seem to find any answers, and did that in the last week or two.
Just, want to use Skype and MSN messenger.
But if i cannot get these problems to be resolved, then no point in installing, probably will not work, and have not tried this feature out yet on my machine.

Any one had similar problems, with their Toshibas? and where do i go from here.
Really stretching my head and not sure what to do?
The guy said maybe to do a recovery disk, but do not really want to go down that road.

That would mean having to spend hours reinstalling everything, and I do not have really the time to do that at the moment.
Really busy at the moment. Can any one offer any other suggestions or where do i go from here?

Had this problem, when i got it out of the box, and purchased from Harvey Norman, Burnie, Tasmania.
Cheers Marvin.

ps: could if any one help, could they e-mail me ... Read more

Answer:Webcam issue with Skype and MSN messanger on Satellite A300

What model Toshiba do you have?

Are you sure the USB device is the webcam? Have you checked Device Manager?


* Download the updated Chicony Webcam driver from http://203.56.127.6/driver_download/Public//p2_all/ChiconyWebcam_v1.7.175.0123.exe
* Install Vista Service Pack 1, or Vista Hotfix KB934374: http://support.microsoft.com/kb/934374 (KB934374 is included in SP1)
* Update your Messenger software (MSN/Yahoo Messenger, etc..)
* If you have another program that can use the webcam (Skype for example), make sure they are completely closed, and not sitting in the System Tray.
* Try closing the Camera Assistant Bar on the left of the Desktop.
* To stop the Camera Assistant software from running on startup, run Regedit and delete "Camera Assistant Software" from HKLM\Software\Microsoft\Windows\CurrentVersion\Run \

2 more replies
Relevance 70.93%

Hi guys,

My name is Mirella and I wanna know one thing.
My webcam was working well but my computer wasn't.
So my mother sent him to her friend (he's a technical of computer).

I don't know what he did but my computer came back with the same things :/ And in this time my webcam was keeping work good. But after some weeks my webcam stopped work :(
I don't know whats happened.

I uninstalled some programs because maybe he can return to work, but him doesn't work. If I open the software by the camera this say "Locked by another application" but I do not have any strange program on my computer.

Please help me!!
Thank you <3

Answer:Satellite A300-276 - webcam does not work - Locked by another application

> I uninstalled some programs because maybe he can return to work, but him doesn't work

Did you uninstall the webcam software too?
Usually this error appears if another software like Skype for example use the webcam at this time while starting the webcam software.

You should uninstall the webcam software in control panel -> software
Then you should uninstall also the webcam driver in device manager. The webcam should be listed under ?Imaging devices?.

Reboot the notebook. Download the CCleaner and clean the registry and OS using this tool. Reboot once again and install the webcam software once again.

Furthermore be sure that other software like Skype does not run at the same time.

In my experience this should help.

1 more replies
Relevance 70.93%

Hi all.

I have a Toshiba A300-1H3 (PSAG4E) with a webcam and microphone.
The built-in microphone of the webcam doesn't work.
I've tried to reinstall webcam driver (Chicony) and also sound driver (Realtek High Definition Audio version=6.0.1.5559) but it didn't change.

Thanks in advance.

Francisco.

Answer:Satellite A300-1H3 webcam built-in microphone does not work

Hi

I tested it on my notebook U400. It supports also the webcam and internal mic and the mic works only if the webcam is on.

Regards

3 more replies
Relevance 70.93%

I have a Toshiba Satellite Pro A300-1GT. The problem is that the camera does not work. When I start software it writes that I should restart camera or computer. I'm having Windows 7 and I serched the internet for solutions but I find just a discusions with the same problem without solutions.

Sory for may bad English.

Answer:Satellite Pro A300-1GT - Error message when starting webcam

Hello

Have you already tried reinstalling the webcam driver? You can download it on official Toshiba website:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

Before you install it: Remove the current webcam driver and restart your computer. Then try a registry cleaner like Ccleaner and restart again. Now you can install the latest webcam driver.

I hope it works! :)

3 more replies
Relevance 70.93%

Hello everyone.

I had Win Vista installed on this Satellite A300 and it worked ok.
I had no problems at all.

Then I moved to Win7 and now I'm going through the ordeal of making the webcam work.
I have tried installing all kinds of drivers, even the ones for A500, but it would be no use.

So, how can I make the webcam work on my A300?

I've tried everything, even installing Ubuntu on this laptop and still it wouldn't work. If it's of any of your interest, I'm running Win7 in Spanish, x32, Home Edition.

I really need your help here, please, I beg you, I've spent the past 5 days trying almost EVERYTHING!!
And still I'm getting the message after every installation/reboot of: "La camara web esta deshabilitada o ha fallado. Por favor, compruebe las configuraciones de su camara web", which would translate into something like "The webcam is disabled or it has failed. Please check your webcam configuration". I have been browsing the forum for related problems but i found no solution :(

Thanks in advance,

Ozma.

Answer:Re: Satellite A300 - how can I make the webcam work on Win7

Hi

Seems that webcam software has not been installed properly.
What Win 7 OS are you using? 32bit or 64bit?

Here you can find Chicony webcam driver for Win 7 64bit
http://support1.toshiba-tro.de/tedd-files2/0/webcam-20091026100013.zip

and here you can find Chicony webcam driver for Win 7 32bit
http://support1.toshiba-tro.de/tedd-files2/0/webcam-20091023184836.zip

Good luck

6 more replies
Relevance 70.93%

Hello everybody,


I've got a big problem with the Face recognition tool and my operating system Windows Vista.

Yesterday I installed Windows Vista 64bit on my new Sat. A300-22F Notebook because the preinstalled
version of Windows was only 32bit and I've got 4gig of RAM.

So, all drivers are installed and all works. The webcam driver with the webcam program works, too.
But when I start the Face Recognition tool, an error appears that the webcam can't be initialised or that
the webcam is in use and cannot be used at the moment with the program.

So, no program uses the webcam. The webcam works with other tools. And in the settings of the face tool
are the webcam still available, but without working.

Anyone an idea?

I've got the webcam drivers directly from Toshiba.

Thanks.


Greetings.

Answer:Satellite A300-22F - Face Recognition can't use the webcam on Vista 64

Hi!

Do you have start up programs that uses the camera like Skpye or MSN?
Check this!

Are you using the newest version of the Toshiba drivers and tools? Look on the Toshiba website for an update.
Furthermore I would try to update the BIOS. You can find it on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers

Bye

2 more replies
Relevance 70.93%

Hi there, I have just bought a Toshiba Satellite A300-1K6, and I must say that I am very dissatisfied with the quality of the webcam. The problem is that there is a lot of "snowstorm"-effect on it, in other words, the quality is severely altered by small whirling dots (very much like a tv with poor signals due to missing or broken antenna when using it in conjunction with Live Messenger or Skype. When I start the web cam outside these applications it looks much better. Is it really supposed to be like this or can I do something about it?

Another thing is that the sensitivity of the camera is very poor when it comes to darkness. In a normal lighted room the camera barely detects my face, and I almost have to put a flash light on my face for it to detect it. Then all of a sudden the camera gets more sensitive. Is this due to some kind of night mode? Why does this happen?

I hope anyone can help me, because this is becoming annoying.


Thanks for your answers

Answer:Webcam on Satellite A300-1K6 is very granular and unsensitive to light

Did you remove the clear sticker covering the camera?

4 more replies
Relevance 70.93%

Hi there guys,

its been a few weeks since installing Windows 7, only for the last few days have i actually bothered to install toshiba software (dont stone me!).

Right now I've been scratching my head when installing the webcam drivers. When the install is done and after a reset, all it says is Webcam failed to initialize, please restart cam or computer.

Restarting the laptop wont do anything

I am using a Toshiba Satellite pro A300 PSAGDA-01C00R, do these drivers simply not work for the time being on 7?

any help would be great, thanks!

Answer:Satellite Pro A300 PSAGDA: Problems installing webcam on Win 7

Do you have skype or a messenger program installed? Maybe its taking control of the webcam.

6 more replies
Relevance 70.11%

I have A300-243 PSAG8E, after installed win7 my webcam DONT WORK.
it had been worked before with VISTA AND spype.
I upgraded the bios and updated drivers.
Webcam is not listed driver of win7 32bits of A300.
As it suggested in one of the forums i downloaded other driver from A500/ A350 ect non of them worked.
displayed on the screen:
"Webcam is either disabled or has failed. Please check your webcam settings" also Camera is not listed in Device Manager." imaging not listed.

I restarted and used cccleaner after my attemps and nothing succeded.
What else I could do.
PLEASE HELP ME.
ORNA

Answer:Webcam doesn’t work on my Satellite A300-243 with Win7 32bit

It is really strange. I own Satellite A300 with part number PSAG8E and use Win7 32bit on it. I have installed webcam driver/utility offered for A500 and it works perfectly. I use it with Skype without any problem.

Strange is that cam is not listed in device manager.
If possible install original Vista OS again and test functionality with ?factory settings?. This will be best test to be sure there is no hardware problem. If everything works OK let me know and I will send you my install order for Win7.

11 more replies
Relevance 70.11%

Recently purchased a Satellite Pro A300, with built in webcam. However, when i try and use the webcam in Windows live messenger it comes up with the following error messages.

*"We couldn't start your camera device. Please check that your camera is not currently in use by another program, and then try again."*

Also this message..

*"Messenger is not available right now. Please try again later. (0x82000009)"*

Now, the camera is not turned on, and Messenger is working normally.

*HELP!!*

Thanks

Folic

Answer:Satellite Pro A300 - Webcam is not working in Windows live messenger

When you get the message if an other program use still the camera.

So try to disable the webcam software and other messenger programs in msconfig.
Then reboot the notebook and if you want to use the webcam software you have to start the webcam software firstly.

1 more replies
Relevance 70.11%

Hi

I have problem when I open my webcam Ii see this message:
+CEC_MAIN.exe has stopped working+

http://www.assayyarat.com/myimages/Sep08/bloool_Untitled.jpg

Can any one help me?

Answer:Webcam issue on Satellite A300 - CEC_MAIN.exe has stopped working

??

5 more replies
Relevance 70.11%

I'm getting frustrated so I've come here to see if anyone knows a way to help resolve this issue.

I have a Toshiba Satellite A300 which came with Windows Vista 64-bit pre-installed. After about a year or so of having the laptop, I decided to upgrade to Windows 7 64-bit. In the process, I believe the driver to my webcam (Chicony usb 2.0 camera) was deleted.

When I go into devices manager in the control panel, the webcam isn't listed; neither is "imaging devices."

I have tried downloading the driver manually, but I keep getting an error message, "Webcam open fail. Restart camera or computer."

My computer has listed my webcam as "unknown device."

If anyone knows how to fix this, please, I beg you, let me know.

Answer:Satellite A300 - Chicony webcam not working after windows 7 upgrade

> My computer has listed my webcam as "unknown device."
> I have tried downloading the driver manually, but I keep getting an error message, "Webcam open fail. Restart camera or computer."

This means that the webcam driver is not installed properly.
Visit the Toshiba European driver page and install the right webcam software/driver for this notebook model.

If the installation fails, restart the notebook and tries again.
This should solve the issue.

1 more replies
Relevance 70.11%

I have a Toshiba Satellite A300 PSAG4A 02L00M with Vista Home Premium 64 bit.
The webcam is not working and it is not detected in the Device Manager.
When I install the Chicony Camera Drivers, I get the "Webcam driver open fail." Error message.

The fact that I can not see the Webcam in the Device Manager is telling me that there is perhaps a hardware fault.
However I am hoping it is a setting that I can fix myself.

I had restored the laptop to factory settings also and I have updated the bios.
I have tried uninstalling all the USB Controllers and restarting the PC.

Is there anything I can do?
Perhaps it is a software issue?
Perhaps there is a setting?

Answer:Satellite A300 PSAG4A: Webcam not detected in Device Manager

Best way to test hardware functionality is to check it with ?factory settings? installing operating system with Toshiba recovery image. As I can see you have done this already.

So if cam still doesn?t work properly I am afraid there is some problem with hardware.
It cannot be software issue because recovery image contains proper driver for the cam.

1 more replies
Relevance 70.11%

I own a Satellite A300-1M1 laptop

It reads some DVDs, on windows media player or VLC, but fails to read CDs and a lot of DVDs

The drive is recognized on Windows Vista. I have updated the drives and rebooted. Then deleted from devide manager and rebooted. The deleted from the registry the UpperFilters and LowerFilters and the rebooted again.

The problem persists is exactly ther same. I can read a DVD (movie DVD) but not a CD (with data). I can read both discs on a different laptop.
When I insert the DVD, the disc spins and in a few seconds it shows up in windows explorer and can be played with Windows Media Player or VLC, for example. When I insert a CD with data, the CD spins, there are noises of skidding, at different speeds. The mouse cursor briefly changes shhowing a disc under it, the orange light blinks, but after some 40 seconds or so only a message shows up "Please insert a readable disc". Needless to say, I have tried several different CDs. Only movie DVDs I manage read on the drive.

The drive is listed on Device Manager as:
HL-DT-ST DVDRAM GSA-T50N

The Satellite A300-1M1 spcs are:
Intel CoreDuo P8400 2,26 GHz
4GB RAM
I use Windows Vista (as it came installed on this laptop)

What can I do to correct this problem?

Answer:Satellite A300 1M1 - CD/DVD drive skids, makes noise but fails to read CD

Hi

I think there is no much to do buddy?
I think it?s a CD/DVD drive issue?
There could be something wrong with the drive laser lens or the disks are not fully compatible?

You could try to burn the disks on another computer and could try to read the copied disks?

Otherwise you will need a new CD/DVD drive

1 more replies
Relevance 69.29%

Hi guys,

I have purchased the A300-1QM last week and so far I really like this notebook. There's one thing about the built-in webcam though. I know it's better not to expect the best picture from a 1.3MP webcam, but the picture I get using the latest software from the toshiba page is not only way too grainy, it also gets way too dark if the overall lighting in the room is rather darkish. From one moment to the other. Let me explain.

It goes like this: I am running Windows Vista Home Premium. I start up the webcam software and the picture is really grainy (oh well) but at least it is bright enough for me to see myself in front of the computer. Then when I lean back in my chair and wait for a few seconds, the picture turns way too dark all of a sudden and I can barely see anything anymore. It seems like the webcam suddenly finds out that it's pretty dark in the room and in the background and therefore decides to fade to almost black why so ever. I dunno how to explain it better. Why would anybody want a webcam to darken the picture after a few seconds when it's already dark in the room?

I have tried all properties and settings in the latest software (night mode, that backlight thing, ...) but nothing changed. It seems to me that it has something to do with the driver, not the software. Because when I uninstall the software and restart and keep only the drivers, the described behavior does not change (in different applications like Skype for example).

Did you have si... Read more

Answer:Built-in Chicony webcam suddenly turns too dark on Satellite A300-1QM

You say that its happening with the "latest" webcam driver, was it happening with the original driver as well?

Have you removed the plastic protector that sits on the camera?

8 more replies
Relevance 69.29%

Hello

I just bought a *Satellite A300-1MC* (runs on Vista Home Premium), and downloaded Windows Live Mail And Live Messenger.
The inbuilt webcam won't work with Live Messenger ; and when selecting Tool, Audi + Vieo Setup in Messenger I get thye following message : "We are unable to run Audi Video setup".
The webcam works fine with the Camera Assisant Software.

I have tried : 1) killing the C.A. Software and starting Messenger ; 2) dowanloading a webcam driver from Toshiba website ; 3) Updating Windows Vista
None of the above work.
Any suggestion gladly received.....
Thomas

Answer:Satellite A300 - inbuilt Chicony webcam won't work with Win Live Messenger

You could try installing cam software such as ManyCams - http://www.manycam.com/
The program basically accesses your webcam video and redistribute it as a ManyCam video device.

Richard S.

3 more replies
Relevance 67.65%

I have a Satellite M305d-s4830.
My PC's operating system is Vista 64bit.

Cam and mic were working fine until one day the camera assistant software started showing a messagebox saying that: "Webcam driver open fail. Please restart the camera or computer."

Since then I tried everything that comes to my mind, but I think neither the cam nor the mic appear in the device manager. I also have the recovery disk for Toshiba.

What am I supposed to do?

Thanks in advance

Answer:Satellite M305D-S4830 - Webcam driver open fail - Now webcam & mic does not work

Hi

> Since then I tried everything that comes to my mind, but I think neither the cam nor the mic appear in the device manager
Hmm? you mean the cam is not listed in device manager?
Neither an unknown device nor near a yellow exclamation mark?

Sounds like hardware issue? but try to recover the notebook using recovery disk.
If this will not help then it means that there must be something wrong with the cam?

I read in the net that some people had a similar issue.
The webcam worked when opened the laptop lid only halfway.
But webcam disappeared when the lid has been moved up.
Possibly there was an loose contact between the cable and cam?
In such case the ASP technician should check the notebook?.

1 more replies
Relevance 67.65%

Installed Webcam driver ( webcam-20080519191643.zip )
When load PC error: " WebCam driver open fail. Please restart camera or computer "

http://photofile.ru/users/romikok/135126109/137170363/
http://photofile.ru/users/romikok/135126109/137170362/

What can i do ???

HELP, plz )

Answer:Satellite L300 - WebCam issue: WebCam driver open fail

Have you installed service pack 1 for Vista and latest windows updates?

If not, please update. One thing you could try is to completely remove the drivers, using some registry cleaning tools like ccleaner and reinstall camera drivers.

3 more replies
Relevance 66.83%

Purchased an HP Deluxe Webcam KQ246AA to use with my Dell 5100 laptop, with Windows XP Home Edition O/S, SP3, Intel Pentium 4, 2.66GHz CPU, and 512 GB RAM. Loaded the HP supplied software CD, and then plugged the cable into a USB 2.0 port, but it failed to connect to the webcam. The hardware wizard gave the following message: “Problem installing the hardware: HP Deluxe Webcam KQ246AA. An error occurred during the installation of the driver. The data is invalid.”

Have tried multiple times to delete and reload the software. Located the driver by clicking on Computer, System Properties, Hardware, then Device Manager tabs and found the driver under “Other Devices” which shows a yellow question mark. Is this the proper location for a device connecting to a USB port? Please advise. The General, Device Status tab contains the following message: This device is not configured correctly (Code 1). To reinstall the drivers for this device, click Reinstall Driver. I’ve tried to reload according to the prompts, but with no success. What’s the solution?
 

Answer:Solved: HP Webcam Driver Fails To Install

8 more replies
Relevance 66.42%

It happens most of te times.
The webcam of my T110 fails to initilize, and a message appears saying that Web cam failed to initilize, please verify the device and restart the program (Web Camera Aplication) or the computer!

Other times, it works, but after a pop up appears on task bar saying that a unsupported USB device was detected and couldn't be installed!

This is anoying! Can anybody help me please?

Thank you.
Manuel Quinaz

Answer:Re: Most of times Satellite T110 webcam fails to initialize

Hi

Seems that the webcam software stopped working.
I think you should firstly try to reinstall this software.

Remove firstly the webcam software from the system.
Then clean the system and registry using CCleaner!
Reboot the notebook twice and run CCleaner several times to ensure that everything has been cleaned properly.
Then download the webcam software from the Toshiba European driver page and install it.
Then reboot the unit. Start msconfig (in RUN type msconfig) and go to Startup tab.
There you should uncheck mark from the webcam software. This will prevent the software from starting automatically. Reboot the unit.

Now if you would like to use the webcam go to All programs -> Toshiba -> webcam software and start it.

9 more replies
Relevance 65.19%

I upgraded Windows Vista by Windows 7 in my Toshiba Satellite L300 notebook. Drivers for chicony webcam installed automatically. Device manager is showing webcam with installed drivers and give message that device is working properly. But when I starts webcame the message appears stating "Webcam driver open fail. Please restart camera or computer."

What can I do for that?

Answer:Webcam driver open fails - Restart camera or computer

Unfortunately not much. Windows 7 is still not on the market and not supported. Toshiba does not offers tested drivers, tools and utilities for this OS.

By the way: if the cam assistant software is not started, can you use cam in Skype.
I will test Windows 7 next days and want to check cam functionality with Skype.

4 more replies
Relevance 64.78%

I'd like to update to last version the driver of my *ati radeon 3470 hd* on my *a300-1mz* (*psagce*) with *Vista 32bit* os.
Currently the *driver version is the 8.477*.

I tried to download new driver from the *download center of toshiba.com* at this link:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

But *I don't find my video card model* from the result page
[result page|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=781&selSho rtMod=746&language=13&selOS=26&selType=11&yearuplo ad=&monthupload=&dayupload=&useDate=null&mode=allM achines&search=&action=search&macId=&country=9&sel ectedLanguage=13&type=11&page=1&ID=67479&OSID=26&d riverLanguage=42]
Here is a [Screenshot|http://www.pctunerup.com/up/results/_201104/20110430144607_driver.JPG]

*Give me support for update correctly the video driver* to the last version
Thanks

Answer:Need right video driver for my Satellite A300-MZ

Someone can help me?

13 more replies
Relevance 64.78%

Hi,

Im having problems finding the newest graphic drivers for my 3650 Radeon Mobility. I need to update these for the game "Far Cry 2" which requires the updated ones.

My Notebook is a Satellite A300-1MX (3650 Radeon, 512MB dedicated+ 512MB shared of RAM for graphics)

Could anyone maybe send me a link with the newest drivers or a website?

Thatd be great!
Thanks a lot
Sascha

PS: !!!!! I use windows XP Professional !!!!!

Answer:Satellite A300-1MX - Need new graphic driver

Hi!

Have you looked on the Toshiba website? There you can find newer graphic drivers for your notebook:

http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers

Bye

1 more replies
Relevance 64.78%

Hello,
I recently installed XP on my A300, but it seems not to run smooth enough. The part where VGA takes place when viewing a web is really irritating, for example http://forums.pcbsd.org/ <- scrolling down this is a lagy process, it shouldn't be, the problem is with VGA. First I installed
12/01/09
Display Driver
ATI Windows XP 8.477 World Wide
and after that I decided that maybe older is better by installing this:
15/12/08
Display Driver
ATI Windows XP 8.552.0.0

None of that seemed to solve the problem. Any ideas?

Answer:Satellite A300 - VGA driver run not smooth enough

Hi,

Have you installed only the display drivers or all other drivers and tools too? The display driver is not enough and you have to install all drivers and tools that you can find on the Toshiba website.

Anyway, what internet browser do you use? Have you tried Firefox?

Does this happen on other websites (e. g. Toshiba) too?

Greets

4 more replies
Relevance 64.78%

Hey,

Can you tell me which of drivers is responsible for illiminated LED in A300?
I have reinstalled the system and i noticed that there is a possibility to turn on and off LED via BIOS, but it's a little not conveniant to use this way every time.
So my question is which driver helps me to use the first touch button on the left (on panel) to light up and down the diods (as in oryginally installed system)?
Thanks for help,

Regards,
Kuba

Answer:Need Illuminated LED driver for Satellite A300

Hi

The Illumination can be changed in the Toshiba HWSetup tool.
This tool can be found in the control panel.

Start this tool and choose ?Illumination? tab.
There could enable and disable the illumination for LED, touchpad, function button backlight.

Check it out!

1 more replies
Relevance 64.78%

Hello everyone I need your help.

I have installed a new graphic driver on my A300-22W and now I cant launch driver. I have instaled version 8.611. I tried to uninstall every ati drivers and I have deleted all ati folders but it doesnt work. Unfortunatelly new driver will not be :(
Can someone help me with this issue and i dont want to use my recovery dvd because I dont wat to lost my data.

Please help me and please forgive me my english ( i am very bad in grammar)

Answer:Satellite A300-22W - Can't launch driver

Hi buddy,

> now I cant launch driver.
What you mean with ?launch? driver?
Usually the display driver will be started with Windows? Is the graphic card recognized properly in device manager?

> i dont want to use my recovery dvd because I dont wat to lost my data.
For such cases make a backup and buy an external HDD. They are not expensive these days.

6 more replies
Relevance 64.78%

Hi

I just bought a Toshiba Satellite A300 PSAG4G with pre installed Vista. But i want to convert to Windows XP
But i am not getting the correct display driver for that.

I tried searching in Toshiba site but i am not getting the correct driver.

Can anyone help me please?

Answer:Satellite A300: Need ATI HD3470 XP driver

Hi

PSAG4G series seems to be a Toshiba Indian notebook series. Where did you search??? Did you search on the Toshiba Indian page for the right display driver??

Please check this page for the right display driver:
http://www.toshiba-india.com/

Regards

2 more replies
Relevance 64.78%

Hello,

I've just installed Windows XP in my laptop, and installed all toshiba drivers. The problem is that the wireless LAN drivers don't seem to do anything, because it still doesn't recognise the wireless LAN card.
I've tried installing Atheros drivers, Realtek an Intel but got no luck.

Windows XP actually throws one of those 'New Hardware Installer' but can't find any drivers.

Any ideas why does this happens?

Thanks

Answer:Satellite A300-1ID - Need XP WLan driver

Hi mate,

could you please go into the "Device Manager" then click on the device with the exclamation mark and check under the tab "Details" the point "Device Instance ID"?

Please post this entry here and maybe we can find out which card is installed. If you would like to do it on your own then just write this entry or just till the second slash into google and you´ll maybe find out which network device is installed..

Greets

2 more replies
Relevance 64.78%

Hi!

I have a problem. Hope somebody can help.

My laptop won't start. Every time I turn it on, it flashes this message saying "your computer was unable to start".
Then it will run start-up repair...and up to now, start-up repair is still running but nothing happens...it?s been running for 2 hours now...
Can anybody help? Do I have to reformat my laptop? I hope not...

Satellite A300
Windows Vista Premium

Answer:Unable to start my Satellite A300

Hello

Disconnect AC adapter and remove the battery. After 10 minutes connect AC adapter and try to start it again.
Can you enter BIOS settings?
Can you see Toshiba welcome screen?

3 more replies
Relevance 64.78%

I bought 3 Laptops (Satellite A300-MM1) a month ago but I noticed they were all very slow at start up (boot).
They took about 6 minutes till I saw the desktop and sometimes don't work.


Satellite A300 MM1 (harman/kardon)
Windows Vista Home Premium (Service Pack1)
Intel(R) Pentium(R) Dual T3200 @ 2.00 GHz 2.00 GHz
3.00 GB RAM

I thought it was the Antivirus but I put McAfee Antivirus in two of them and Kaspersky in the other but I faced the same problem.


What I should do?

Answer:Satellite A300-MM1 - start-up is very slow

Is TEMPRO preinstalled on these notebooks?

6 more replies
Relevance 64.78%

Bought a new A300-1MO couple of months ago and didnt make the recover DVD.

I was installing updates for vista. The laptop wasnt plugged in and it got off halfway.
Next I try to use the 'repair your computer' option to try recovery hdd and nothing gets loaded... just blank screen...

What do I do now?
Is there any way I can recover my laptop without having to buy a recovery CD/DVD?

Answer:Re: Satellite A300-1MO wouldnt start

The only way to recovery your notebook without DVD is to start HDD recovery procedure.
At first we must know if you can start your notebook properly.

Connect it to AC power supply and start it up.
Can you enter BIOS settings?
Can you see Toshiba welcome screen?

3 more replies
Relevance 64.78%

My operating system is home Vista...It takes a long time to load my operating system to type my password.
Will anybody please suggest something to solve this..
Thanks

Answer:Re: Long start-up on my Satellite Pro A300

Hello

Check http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947
This is interesting thread with the same theme. I hope you will pick up useful info there.

2 more replies
Relevance 64.78%

I have purchased the Satellite Pro A300-1E7.
Webcam is not functioning properly in MSN messenger video call.
Am having similar problems to the previous posting except I am using Zonealarm.

I think Zonealarm challenged cec_main.exe in a similar way.
I have tried to follow the instructions on here but without much success.
I removed Camera Assistant SOftware and re-installed the driver but doesnt appear to have improved things.
Now c:\program files\ camera assistant software for Toshiba has disappeared altogether and the the camera assistant panel no longer appears on the side of the desktop.

Any ideas please?

Answer:Satellite Pro A300-1E7 - cannot start cam software

Hi

I used the Zonealarm is the past and I was not really satisfied because this software locked everything and most applications didn?t work properly even after new configuration! Finally I removed this software and I noticed further advantage; my notebook boots much faster!!
I think this software would lock the cam software too.

> Now c:\program files\ camera assistant software for Toshiba has disappeared altogether and the camera assistant panel no longer appears on the side of the desktop.
This would mean that the software was removed and was not installed properly.
But to be sure, check in control panel -> Software (add & remove programs) if the webcam software is installed.

I?ve got the internal Chicony cam too and it?s working fine in connection with Skype software. I didn?t test MSN but I don?t see any serious reasons why it shouldn?t work.

In my opinion you should firstly remove the zonealarm. Then clean the OS using CCleaner. Finally download the webcam software again and reinstall it!

The webcam toolbar is not always visible on desktop.
It would appear only if you move the mouse cursor to the place where the webcam toolbar was hidden.

2 more replies
Relevance 64.78%

Hi,

can any of you help with A300 which sometimes (recently even more often) just wont start/boot?
I run my A300 without battery, when I press power button

1) Fun starts
2) "Sattelite" logo on lower left corner blinks
3) HDD diode blinks
4) display wont turn on even for a while
5) touchpad lightning stays off
6) It will continue like that for ever (no activity except fan)

After couple of hard reboots it may occasionally boot and then is working absolutely fine.
Any ideas?

Many thanks!

Answer:Satellite A300 intermittently won't start

On this virtual way it is not possible to say for sure what the problem is. Since two weeks I have similar problem on my A300. It won?t start at all. Power LED blinks two or three times and it is all what happen.

At the beginning it happened sporadically but now there is no other reaction. I think problem is board power supply electronic.
On your A300 it can be the same.

2 more replies
Relevance 64.78%

I have recently purchased an A300 1F0 and everything runs perfectly except the starting up.
It takes +/- 2 min 30 to reach the login screen.

Question:
is there anyone with the same problem?
Or does anyone know how to resolve this?


Thanks!

Answer:Start up speed at Satellite A300-1F0

Hello

At first I must say that this is not ?problem?. I really don?t understand why people define everything what they don?t like as a problem. Call it ?. situation or maybe issue. But it is definitely not the problem.

So, on this forum you can find a lot of discussion about this ?issue? and to find it you should use advanced search option. To save your time I have one for you http://forums.computers.toshiba-europe.com/forums//thread.jspa?messageID=134974

Read it carefully and please post your comment to this.

1 more replies
Relevance 64.78%

I want to recover my Toshiba Satellite A300-1G5 Notebook to factory settings state. But when I run the HDD recovery wizard, It says that the file or program is not found.
And when I checked to my Partition drive its not also there.

Please help me or post information on what to do or where to get the HDD recovery thing..

Thank you and I hoping for your response from the great community of this forums.\

Answer:Cannot start HDD recovery at Satellite A300-1G5

Hi,

Seems to me, the Hdd recovery image is already not available on your hard drive. Did you make a recovery disk? Otherwise, you need buy from Toshiba, the more information for ordering is:

https://backupmedia.toshiba.eu/landing.aspx

3 more replies
Relevance 64.78%

Hi there,

My name is Tom and I own a Toshiba Satellite A300-23J for for about half a year. Yesterday I used a HDMI cable attached from my laptop to my LCD screen to play abit on higher resolution. Moreover, after some time the PC crashed and restarted itself with an error showing up on the screen.

I tried couple of times to reset and start it again with no success at all. What I get while trying to start up my computer is this:
First the black screen of windows recovery error and then whatever option I choose the blue screen pops up.
http://img29.imageshack.us/i/img9210a.jpg/
http://img29.imageshack.us/i/img9212p.jpg/

Thanks for your time,

Tom

Answer:Satellite A300-23J - BSOD on start up

Hi Tom,

I have a little bit searched using Google and I founded some interesting articles about this BSOD code 0x00008086.

It seems that the only solution to solve this problem is Toshiba recovery disk now. I mean normally repair option would also be my first choice but if you get a bluescreen too, you don?t have any other options now.

So enter the Toshiba recovery disk and boot from it. It can restore factory settings in few minutes. Don?t forget that your whole HDD will be wiped.

Good luck! :)

5 more replies
Relevance 64.78%

My daughter dropped the laptop. I now get a blue screen that says that I need to press F8 to start the recovery process. But when I press F8 nothing happens.. Any ideas? I would really appreciate any feedback.

Answer:Satellite A300-21H - Can't start the HDD recovery

> My daughter dropped the laptop. I now get a blue screen that says that I need to press F8 to start the recovery process. But when I > press F8 nothing happens.

I think there is something wrong with hard drive after drop. Can you enter the Bios (f2 on startup) to check if hdd recognized. You can see it on main page or boot option.

4 more replies
Relevance 64.37%

Hi all.

I am purchased Satellite A300 1MT at 12 may 2009.
After first turn on, installated Windows Vista.
But Device Manager have a one ininstalled device with name "Ethernet card", but WLAN card no.

I am down load drivers from toshiba web site. But any drivers doesn't fits.
Can you advise advise something?

Thanks

Answer:Re: Satellite A300-1MT: Where to find the WLan driver?

Hi

Did you try to install the Atheros WLan driver?
As far as I know it should be the right one because from my knowledge the Atheros Wlan card has been installed in this unit.

Please check the Toshiba WLan portal:
http://aps2.toshiba-tro.de/wlan/

Here you can find the Atheros driver for Vista!

3 more replies
Relevance 64.37%

Hi,

where can i get newer drivers for a Satellite A300?
The toshiba driver is from 2008 - now we have almost 2011.
For a new Software, i need the latest drivers. Toshiba stopped at 7.XX Intel itsself provides Version 15.X.

Is there any posibility to use the intel integrated graphics driver?
Is there any posibility to modify the driver from Intel to be installed on the Notebook?

For me it is not "support" to stop forcing drivers with delivery of the notebook - Systems and OS change and need to be updated.

any Help?

Answer:Satellite A300: Where to get GPU driver newer than 2008

>Is there any posibility to use the intel integrated graphics driver?
>Is there any posibility to modify the driver from Intel to be installed on the Notebook?

You can try to install the graphic card driver from Intel page.
If the installation using setup.exe will not function then try to install the driver via device manager.

Here you can choose the Advanced Installation procedure which allows you to point to the driver files downloaded from Intel page and this will force windows to choose exactly this driver.

bye

2 more replies