Computer Support Forum

Satellite Pro 6000; standby function doesn't work after upgrade from W98 SE to XP

Question: Satellite Pro 6000; standby function doesn't work after upgrade from W98 SE to XP

I bought a windows XP cd and installed it over W98 on my Satellite Pro 6000. The standby function does not work now. I probably need some software from Toshiba. What do I need? Where do I find it? What is the installation order?

Relevance 100%
Preferred Solution: Satellite Pro 6000; standby function doesn't work after upgrade from W98 SE to XP

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Satellite Pro 6000; standby function doesn't work after upgrade from W98 SE to XP

Hello

All WXP drivers, tools and Utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > Support & Downloads. You have older notebook model and because of that under ?Product type? please choose option ARCHIVE.

Installations order is as follow:
-Windows XP
-Display driver
-Audio driver
-Toshiba Common modules
-SD Card Host Driver
-SD Card Driver
-BlueTooth Stack
-BlueTooth Easy Connect
-Mouse driver
-Modem driver
-LAN Driver included with WinXP
-Infrared driver
-Toshiba Power Saver
-Toshiba Utilities
-Toshiba Mobile Ext.
-Toshiba Console Ver.
-Toshiba Hotkey for Display Devices

I hope you will be able to install WXP successfully.

Good luck!

2 more replies
Relevance 91.02%

Hi all

New to this forum so sorry if this has been asked before, I did do a search but couldn't find anything so here goes.

I have just bought some new RAM for my Satellite Pro 6000. When I install it nothing happens the laptop doesn't boot up. If I put the old stick back in no problems. The ram I bought is 512MB unb PC133 CL3 and old RAM is 256MB PC133s. I think bit small to read with these old eyes.

I have been told I might need a BIOS update but can't find one for my laptop running 1.4 at the moment.
Any help would be great thanks Lindsey

Answer:Satellite Pro 6000 - New RAM doesn't work

I think the new RAM is not compatible with the mainboard or notebook.

The manufacture of the new RAM that you said is not known to me so I would buy an other RAM, for example Kingston. Kingston makes high quality RAM and many users here buy Kingston RAM for upgrading her RAM.

By the way: Do you use both RAM or only the new one? Normally if you use two RAM modules you should use it with same specification.

The BIOS update you can find on the Toshiba website but this doesn?t affect the compatibility of the RAM.

3 more replies
Relevance 89.38%

hi,
I've a Problem with the keyboard of my SP6000: when I press "3" I get "93"; "d" ==> ".d"; "e" ==> "oe". When I hold "3" I get "93333333333333333" a.s.o. I've allready changed the keyboard, without success.

I get this Problem with XP, Knoppix and DOS.

Brgds and thanx for answers.
tom from hamburg

Answer:Keybord doesn't work correctly (Satellite Pro 6000)

HI,

did you updated the BIOS yet? Did you also make an EC/KBC update?

Did you the new keyboard connected right?

Bye Pete

3 more replies
Relevance 86.92%

Hi, I have a Toshiba Satellite L670-11M, recently I have do a update of the bios and from that operation I have noticed a problem with standby,
?
I am able to put the computer in standby mode but when I need to restart it,
the notebook go on and nothing appears on the display,

I should need to change the bios with a previous version but toshiba does not allow it, so which solution??

Thanks!

More replies
Relevance 83.23%

I've bought a new notebook " toshiba satellite L50-b-1Q0" and I've changed the SO Win8 64bit -->Win 7 64bit.
I've installed all the drivers and the pc works, but the only problem is the function key.
The driver value added package is installed, but is there another way to resolve this problem?

Thank you
Marco

Answer:Function key doesn't work on Satellite L50-B-1Q0

Hi

Please check if you can change the settings regarding the special function key mode in the BIOS.
Usually this option allows you to use the function keys without pressing the FN button.

Play around with this setting and don?t forget to save the changes in BIOS.

Furthermore ensure that BIOS is already up to date and the VAP was installed properly.

2 more replies
Relevance 83.23%

Hi,
I bought A200-14E with Windows Vista preinstalled. When i switched to Windows XP i discovered that standby and hibernation doesn't work. When i try to switch to standby mode screen goes black, but on/off light doesn't get "brown" as it should. It's blue. Also from time to time HDD light flashes.

I tried to reinstall Windows couple times but everytime it doesn't work. One time i installed drivers in some specific way and i made it work. But unfortunately i had to reinstall XP one more time, and i can't remember which drivers i should install.

If you had similar problem please write what should i do.

Regards

Answer:Satellite A200-14E - standby and hibernation doesn't work

Hi

> When i switched to Windows XP i discovered that standby and hibernation doesn't work.
After the Win XP installation you would need to update the BIOS to the XP version.
You should check the Toshiba European driver page. There is BIOS for Win XP.

After BIOS update reinstall you Windows XP, update it to the latest state and install all Toshiba drivers and utilities.

Greets

5 more replies
Relevance 83.23%

Hi all

I got Win 10 update and noticed, that 3 fingers swiper (to show created desktops) doesn't work after wake up from standby. I downloaded the latests synaptec trackpad driver, but the issue still occurs. I guess it's a driver issue. Would be nice, if it will be fixed in the next driver versions.

btw: I must say, that trackpad scrolling (with 2 fingers) works much better since ~1 month, so I hope for a fix!

More replies
Relevance 82%

Hello.
I had use my notebook Toshiba Satellite model 1800-911 for about 3+ years and it's great and i don't had some problems. But now after installing Windows XP Professional SP2 I have one big problem. When I set to stand by mode the notebook it's going to standby mode and it's great. But the problem is when I like to go on with my work from standby mode the HDD on the notebook is activated but the display is still black and I must to reboot the system. I can't use my PC and all of my work is out... Please help

Best regards,
Nikola Todorovski
[email protected]

Answer:Satellite 1800-911: Standby mode doesn't work properly

Hello Nikola

I assume that the Windows XP SP2 update is responsible for this issue.
Well, in this case you should update the Power Saver Utility.
This you can try on the Toshiba website.
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

Maybe it?s also important to upgrade the BIOS.
Please check if your unit has the newest BIOS version.
Here you can find the BIOS.
http://www.toshiba-tro.de/subpage/bios.html
If you decide to update the BIOS please check the update procedure on this unit.

Good luck

Bye

1 more replies
Relevance 81.59%

I have been researching for almost two hours now and found no solution.

What I would like to do is to be able to use the Fn Key for the hotkeys on the F0-F12 buttons, such as Fn+Esc to mute sound, or Fn+F6/F7 to adjust brightness on my screen. I am running Windows XP, that information is needed. The things I have tried so far was installing some of Toshiba Utilities, such as the Fn-Accessibility and Fn-esse, but they are still not working.

I have no idea why they haven't been working since I first got my laptop. Please help! Thank you!!!

Answer:Why doesn't any of the Function/Hotkeys work on Satellite Pro A200?

In the whole story most important info is missing: which notebook model do you have?
Please send exact model number.

3 more replies
Relevance 81.59%

Hello, I have a Toshiba Satellite A100-499 PSAA9E.

I formatted my laptop and installed XP with SP3. I downloaded and installed the drivers (in the correct order) for that OS from the toshiba-europe.com and all goes right except Fn+F8. It's supposed that this combination has to activate or deactivate Wifi & Bluetooth. When I have the lateral switch in "off" position and I push the keys, appears a message saying that I have to switch it to "on" position but when I have the lateral switch in "on" position and I push Fn+F8 it does nothing.

If I want to deactivate the wi-fi I have to do this with other methodes: the function key doesn't run properly.

Any clue?
Thanks in advice (and sorry for my English).

Answer:Satellite A100-499 - Function Key for WiFi doesn't work

When WLAN switch is in position ON is orange LED also ON?
Can you scan area for available networks?
Have you tried to use WLAN without using FN+F8?

7 more replies
Relevance 81.59%

Hello,

I have Toshiba Satellite L850-13N with Windows 7 x64. The problem is that my function keys doesn't work. Could someone write me which drivers i need to install ?

PS. sorry for my english :)

Thanks for the help.

Answer:Satellite L850 - 13N - Function keys ("FN") doesn't work

Hi

Do you use original os that you got with your notebook?
What you need is Toshiba Value Added Package. Try please to reinstall it.

2 more replies
Relevance 81.18%

Hi,

I have a Toshiba A100 Satellite PSAARA-055007 with Win XP Home SP3 and current updates.

For the life of me, I cannot get this machine to successfully wake up from standby or hibernate!

It goes into hibernate and standby just fine, but when you try to power it back up or take it out of hibernate or standby it seems to start waking up and then it just hangs without the display ever powering up. The only option is to hard boot the system.

So at present Standby or Hibernate do not work at all.

Anyone? Please help!

Answer:Satellite A100 Hibernate / Standby wake up problems (doesn't work!)

Have you noticed the same behaviour in the past?
Maybe some Microsoft upgrade is responsible for it.

4 more replies
Relevance 80.77%

Hi

I just setup a windows Vista & I install the driver after download it from the net but i found that;

1- the switch between the screen & s-video (fn + f5) doesn't work but the other function (fn) work

2- when i put my finger in the right of the mouse pad it must scroll the screen & in the bottom of the pad it must scroll left & right the screen but it didn't work

So plz tell me the solution if it is a program or driver issue.
Plz give me the direct link

thinku

Answer:Fn+F5 function and touchpad doesn't work correctly on Satellite A series

Hi

What notebook do you have?

I presume your notebook was delivered with XP and now you want to use it with Vista OS.
Please note that you need to install the Toshiba Vista Value Added Package to use all the notebook features.
Very important is the Components Common Driver and the TOSHIBA Flash Cards.
The Flashcards provides the Hotkey function and the launcher function that starts the Hotkey function.
Please reinstall it!

The additional touchpad functionality must be configured firstly!
This can be done in control panel -> mouse

There you should look for the touchpad settings and could configure the touchpad scroll areas again.

Bye

1 more replies
Relevance 80.77%

After installing Windows7 the scroll function doesn't work anymore.

New driver are installed - doesn?t work
I tried to install driver of vista - doesn?t work
FN + F9 are activated.

I don?t know what the problem could be.

Any ideas?
Thanks
Nik

Answer:Satellite U400 - touch-pad scroll function doesn't work

> New driver are installed - doesn?t work
Have you installed Synaptics touchpad driver?

Open Synaptics properties and check if this option is activated properly.

By the way: FN+F9 has nothing to do with this specific option. Using this key combination you can just enable/disable touchpad in general.

2 more replies
Relevance 80.36%

Recently I bought this notebook, works fine except one problem...

There is touchbutton for switching LEDs on/off.
When I close or put notebook into sleep, this button doesn't work that way but turns on and off sound.

I'm using Vista I wonder if there is any fix or something for this issue.
Thank you

Andrew

Answer:Satellite A300-15J: touch button doesn't work correctly coming from standby

Can you please tell me if this happen after standby only or after using hibernation mode too?

3 more replies
Relevance 79.95%

I have computer model no A200-1LA and I changed windows Vista for windows 7 32-bit an now my function button doesn't work.

What should I do now? Maybe someone commend me some drive? Please help me I can?t use my pilot.

Answer:Satellite A200-1LA and Windows 7 problem - function button doesn't work

Do you mean FN key or what?
> Please help me I can?t use my pilot.
My English is also not the best but what do you mean with ?pilot??

5 more replies
Relevance 77.49%

Function keys do not work after upgrading to Windows 10
I know I need two drivers (Flash Cards Support Utility) and (Toshiba Function Key Utility) but on the download page Toshiba is not adapted for Windows 10.
Does anyone know when and whether he will be available?
Thanks

Answer:Satellite P855 - Function keys don't work after upgrade to Windows 10

I’m also waiting for Win10 stuff and don’t know for sure when Toshiba will start with Win10 support. I hope this will happen soon.

4 more replies
Relevance 73.39%

Hello,

after upgrading my Satellite L750 to Windows 8 I can't access my CD/DVD-unit anymore (error-code 19 invalid invalid or not complete registry entry). Same error occurs when I connect my USB BD-writer.

Who can help?

Frank

Answer:CD/DVD doesn't work after Win 8 upgrade on Satellite L750

Hi

Start registry (regedit in search) and remove the Upperfilters and Lowerfilters values completely from the following registry key:

HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Control Class {4D36E965-E325-11CE-BFC1-08002BE10318

After that reboot the notebook

7 more replies
Relevance 73.39%

Hi, I have a Satellite A60-793 and I would like to upgrade the memory adding a 512 MB to currently installed memory.

I tried to install a 512MB PC2700 DDR 333MHz SODIMM module, but system won't boot up: it emits a long whistle, then shuts down automatically. If I remove the module, system boots properly.

I've allready updated my BIOS, i there anything more I can do to make it work?

Answer:Satellite A60 memory upgrade doesn't work - help

You have simply used wrong, faulty or not fully supported modules.

Would recommend testing it with another new one

7 more replies
Relevance 72.98%

I am trying to upgrade memory on my Satellite A100-529 (PSAA2E). The system was delivered standard with 1x512MB DDR2 PC2-4200. I installed 2x512MB DDR2 PC2 5300 and the system tries to turn on 5x with no success.

All documentation says that DDR RAM is backwards compatible. Will the A100-529 only take PC2 - 4200?

Answer:Memeroy upgrade at Satellite A100 - 529 doesn't work

I'm afraid to tell you, that you can only use PC2-4200 Ram for your notebook. According to the manual page 8-3 there you can find three part numbers for Ram to be installed. Looking for those numbers it turns out the PC2-4200 (533Mhz) specifications.

You can upgrade your Ram up to a maximum of 2GB. Hope this helps you.

5 more replies
Relevance 72.98%

Brand new Satellite L50-C03E laptop- touchpad doesn't work. Upgraded to Windows 10. Tried using all combinations of F5, FN & F5, swiping and checking settings and nothing works.

Answer:Satellite L50 - after Win10 upgrade touchpad doesn't work

I guess you can use the external USB mouse.
Connect it to the notebook and uninstall the old touchpad software / driver from the Windows 10 system. You should find it in Control Panel → Programs and Features.

After the touchpad driver has been removed, reboot the notebook and check for Win 10 updates.

It would be very interesting to know if this workaround would help you to get the touchpad working again.

1 more replies
Relevance 72.16%

Hi all,

I have a Satellite Pro 6000 that is quite old, but until yesterday it was working fine. Today, it won't start anymore. The indicator LEDs are on (220v:green/power:green/battery:orange) but the BIOS or OS won't start. Fan doesn't work either. The FN key seems to work - if I press it, the indicator below F11 lights up. If I press and hold the power button the power indicator LED goes off.

I've removed the battery to see if that might help, but it basically gives the save (non)result.

Is there any way to do a hard reset? Or is it curtains for this laptop?

Like to hear your thoughts on this one.
JP

Answer:Satellite Pro 6000 doesn't boot anymore

Hi

Try to disconnect the AC adaptor and remove the battery a leave the notebook for a while. Wait about 20-30 min, connect all parts again and try to boot up.
If it will not work I assume the notebook hardware malfunctions? Maybe it?s a motherboard fault (power supply electronic) or CPU.
Who knows?. Without any hardware tests it?s not easy to find out what device malfunctions

2 more replies
Relevance 72.16%

I recently upgraded BIOS to 2.2 and the webcam has stopped working. It disappeared and there is one unknown device in the device manager in the universal serial bus controller.

I tried everything even with new clean fresh Vista OS but nothing like there is no webcam I installed the drivers but not recognized so I would like if I can to downgrade BIOS to 1.5 and to fix the webcam. If I can cos I need it. Is that possible?
Tnx

Answer:Satellite L300 - webcam doesn't work after BIOS upgrade

I have Toshiba Satellite L300-19F model PSL8BE

9 more replies
Relevance 72.16%

After upgrading my Satellite P55-A5300 to BIOS 1.6 the function key 11 no longer turns sound on and off.
Instead F11 now removes the the top lines of my browser making more area to view the text window.
If you hit F11 again it returns the normal browser size window. Useful but not what I want.


Also after the upgrade my fonts in quicken changed slightly to be softer. I am on windows 8.1 which works fine.

Anyone know how to change the function key settings?

Answer:Satellite P55-A5300 - after BIOS 1.6 upgrade F11 doesn't work properly

At the beginning just one question: have you noticed the same problem if you change ?Function keys mode??
Try to change it to ?Standard F1-F12? mode and test how it reacts again?

2 more replies
Relevance 72.16%

Hello,

since the update to Windows 7 my touchpad from my Toshiba Satellite L350- 17Q doesn?t work anymore. I don?t see him in device manager anymore. I try to use added value package and the new drivers from Toshiba site, but this also didn't help.

Please help!!

PS. my USB mouse works fine, but I don?t got more USB space if i got 2 external USB HDDs and my dj panel.

Answer:After Win7 upgrade touchpad doesn’t work on my Satellite L350-17Q

What happen if you use FN+F9 key combination?
Have you checked all mouse settings?

10 more replies
Relevance 71.34%

Satellite L500-1WP

After update from Windows 8 to 8.1 my external USB 3.0 disk do not work.
Windows message: "Device not recognized".

Answer:Satellite L500-1WP: after Win8.1 upgrade external USB 3.0 disk doesn't work

Hi

I guess you are talking about external HDD which supports the USB 3.0 standard.
Right?

Did you try to connect the external HDD to another USB ports?
Do the USB ports work properly in connection with other USB devices?

Does the USB 3.0 device support Win 8.1?

You should check this.

2 more replies
Relevance 71.34%

Hi,

Recently I upgraded my OS, from Win Vista 32 bits to Win 7 32 bits with the DVD of TOSHIBA, and since, the eco touch doesn't work anymore.

When I press it, the laptop doesn't switch to eco mode.

Does somebody have the solution for that, please?

Answer:Satellite U500-11C - After Win7 upgrade the eco touch doesn't work anymore

Have you tried to install Eco utility after Win7 upgrade?

4 more replies
Relevance 71.34%

After Upgrade Vista-Home-Premium --> Vista-Ultimate the Hotkeys with the Fn-Key don't work, for example Fn+F6/7 (Brightness).

New installation of value package wasn't successfull.
By the way, after the upgrade the Toshiba DVD Player is defect, too.
Who can help?

Answer:Satellite A200-10N (PSAE3): Fn-Key doesn't work after vista anytime upgrade

I didn?t try any update on my A200 but you can try to do follow: install Vista using delivered recovery media. When Vista starts for the first time go into Control panel and there you can find option ?Add/Remove programs?. Remove all stuff designed by Toshiba.

When all this stuff is removed, make Vista upgrade. After finishing Vista upgrade install all Toshiba designed stuff in specific installations order starting with Value Added Package. Check please download page if all this tools and utilities are available.

As far as I know all tools and utilities are designed as ?universal? tools and I can not imagine there is some difference between tools for premium or ultimate Vista version.

DVD player is part of installations image only and I can imagine that upgrade installation has changed something but the upgrade procedure is responsible for that. I do not see any connection to Toshiba.

As I said I do not have upgrade CD but if I find one I will try to test it on my Vista (Premium) preinstalled A200-1CR.

Bye and I hope you will report about your experiences with Vista upgrade again.

1 more replies
Relevance 71.34%

Hello,

I have updatet my Toshiba Satellite L500-20X to Windows 8.
Unfortunately, since this update my WLAN Switch no longer works. All function keys work to F7, only F8 (WLAN switch) and F9 (touchpad) no longer work.

What can I do?

Thanks in advance.

Kind regards
Klaus

Answer:Satellite L500-20X - WLAN switch doesn't work after Windows 8 Upgrade

Satellite L500 is not Win 8 upgrade supported? so I think the problem is a missing driver or software?

As far as I know in order to use the FN buttons the Value Added Package for Win 8 needs to be installed.
Check other driver area for Toshiba notebook series supporting the Win 8.
Maybe you could use the VAP released for other series.

4 more replies
Relevance 69.7%

Apologies for cross-posting - I originally put this in the Satellite rather than Satellite Pro Series Forum.

I have an old Satellite Pro 6000 which has 256MB RAM in it, and as a result, whilst it tries its hardest, it isn't the quickest of machines.

I want to upgrade the RAM to 1GB which I believe is the max and have 2 memory modules of 512MB PC133 CL3 3.3v, which I believe should work fine.

However, I have tried to install either as a pair or separately, with the 256MB RAM, and when I put the memory in, the PC resolutely refuses to boot up. The power lights come on, but that's as far as it goes.

I have put the original 256MB RAM back in the slot, and it works fine.

Am I doing something wrong, or missing something?

Any help gratefully appreciated.

Answer:Satellite Pro 6000 RAM upgrade problems

Hi

> Am I doing something wrong, or missing something?
Of course, you use the wrong or not compatible memory modules!!!

The no-booting after a memory upgrade is a common behavior if the modules are not compatible or do not function.

You can upgrade the memory to max 1024MB (2x512MB) and according to the Toshiba page these modules should run:
PC133 512MB (PA3108U-1M51)
PC133 256MB (PA3086U-1M25)
PC133 128MB (PA3085U-1M12)

1 more replies
Relevance 69.7%

Hi,

I have an old Satellite Pro 6000 which has 128MB RAM in it (Elpida - PC133S-333-542-B1).
I want to upgrade the RAM to 1GB which I believe is the max and at the moment i have one memory module of 512MB PC133 CL3 3.3v (PC133S), which I believe should work fine.

I bought 512MB Ram (Micron 512Mb PC133S-333-542-Z / MT16LSDF6464HG-133D2), the memory is newest.
However, I have tried to install either as a pair with the original 128MB ram or only the 512MB, and when I put the memory in, the PC resolutely refuses to boot up. The power lights come on, but that's as far as it goes.

I have put the original 128MB RAM back in the slot, and it works fine, it's very weard because it's the same module reference...

Am I doing something wrong, or missing something?

Any help gratefully appreciated.
Thank's

Greg

Answer:Satellite Pro 6000 - RAM upgrade problems

Did you already tried to change between the slots? Maybe it works.. Otherwise I would recommend you to try a module from another manufacturer, maybe original Toshiba modules.

Sometimes such issues are caused by incompatible modules.

Greets

2 more replies
Relevance 69.7%

Can anyone help? having trouble getting the right memory module.
tried Crucial Uk, was sent wrong module. Tried Orca Logic, was sent wrong module.
The manual says use only part number PA3126U -1M12: 128 MB. Anyone know where I can get this?

Answer:Memory upgrade for Satellite Pro 6000

Hi Bob

I have found info that compatible memory module for your unit are:
PC133 512MB (PA3108U-1M51)
PC133 256MB (PA3086U-1M25)
PC133 128MB (PA3085U-1M12)

You can order them from service partner in your country and also by some online notebook parts dealer. Google a little bit around and you will find a lot of online stores where you can order them. You can also try by your local dealer.

Bye

2 more replies
Relevance 69.7%

Is it possible to upgrade a Satellite Pro 6000 from 802.11b to 802.11g by replacing the WiFi wireless LAN card?

Answer:Toshiba Satellite Pro 6000 upgrade 802.11b to 802.11g ?

Hi there,

sure you can exchange the cards to enable the 802.11g support for your machine. I recommend using the atheros cards, since they?re really good and reliable:

http://www.demarctech.com/products/reliawave-rwu/reliawave-rwu-400mw-atheros-802.11g-mini-pci-card.html

Thats just an example but the card has good specs so you can search with this criteria.

Cheers

6 more replies
Relevance 68.88%

Hello

Is it possible to upgrade or change the satellite pro 6000 motherboard or processor ??
To have a faster motherboard or processor on it.

Thank's

Greg (french guy with bad english)

Answer:Motherboard or processor upgrade Satellite Pro 6000

I wanted to upgrade my old laptop as well, but after researching it, I ran into a brick wall.

You cannot upgrade the Mainboard because it is a non-standard design. Laptops don't use standard designs like Desktops.

It's not recommended to upgrade the CPU because the laptops cooling system is designed for that CPU. If you upgrade the CPU, it may overheat, or may not boot up if the BIOS cannot recognize the new CPU.
Even if you install a faster CPU, it wont make much difference. For example, replacing a Pentium4 1.6GHz with a Pentium4 2.0GHz is only 400MHz difference. There is no way you can install a newer CPU like a Pentium-M or a Core2Duo because the Intel Chipset on the mainboard simply cannot support the new architecture.

Your best option would be to upgrade the memory, or sell the laptop and buy a faster one.

4 more replies
Relevance 68.06%

Could you help ? My standby or sleep key on my
keyboard doesn't work.
 

Answer:Standby doesn't work

Fixed it ! RegSeeker was the problem.
Restored the system and said goodbye
to Regseeker
 

1 more replies
Relevance 68.06%

I suspect this is a bug in the power manager, but it's possible I missed installing something. It's turned on in the BIOS and if I uninstall power manager it will go to 30 day using the BIOS setting timer value. My x230i tablet isn't running the original W7 load from Lenovo, I prefer to load my own.

Answer:30 day standby doesn't work

30 Day Standby in Power Manager ignores the BIOS timer setting.  Power Manager timer is set to 3 hours, and there isn't any option in Power Manager GUI to change this setting.

6 more replies
Relevance 67.24%

When my computer hibernates or I put it in standby mode, the keyboard stops working when I resume. If I restart my computer, it works again. But, this just started happening. A year ago I had this same problem and was able to resolve it myself, but I've been unable to find the fix this time.

Answer:Keyboard doesn't work after standby

ok, wireless or p2 or usb? Which one is it?Some HELP in posting on Computing.net plus free progs and instructions Cheers

4 more replies
Relevance 67.24%

Hi,
I seem to have to same problem as cbsw, the standby function isn't activating on my laptop. When I click, start, shutdown - the standby button is 'grey', ie. I can't click on it, I can only click turn off, or restart.
In the toshiba power saver options, the standby slider is also 'grey' in each profile so I can't activate it.

In the normal power saver options, clicking on the Advanced Tab doesn't bring up an 'Enable Standby' option. All it has is the options of what to if I hit the power button or close the lid. On the close the lid option (which used to put my laptop onto standby) it now only has one option, 'Do nothing'. There isn't even anything else available.

Please please can anyone help?
My laptop overheats and the fan makes such a noise if I just leave it on, and I'm getting tired of having to start up and shutdown five times a day.

Thanks in advance!
Jenna

Answer:Standby doesn't work on Equium

Hello Jenna

I presume that your notebook is not preinstalled with recovery media just with your own OS installation. Am I right?

As far as I know after graphic card driver installation Standby button should be ?activated?. Hibernation option (support) must be activated manually but standby must be there.

I don?t know which Equium you have but obviously the unit should be cleaned properly. Removing the dust unit will be able to ?take a breath? and cooling fan will not run constantly.

2 more replies
Relevance 67.24%

Hi, whenever i push the sleep button on my computer to hibernate or to go to standby, its stops at the screen that says Perparing to go into standby/ hibernation. It just stays on that screen and nothing happens. Does anyone know why this is happening? It was working like a month ago.
 

Answer:Hibernate / Standby doesn't work

10 more replies
Relevance 66.83%

I have a Satellite Pro A210 with Windows XP installed.

For the past serveral months i have had the issue where I cannot change the power scheme options. Any changes I made would just go back to default after a certain amount of time. When I recently tried to fix it I noticed people saying to install Toshiba Common Module and Toshiba Power Saver. I have installed both but now my system wont go into stand by mode (when closing the lid on my computer as well as going to start-shutdown-stand by)

The settings seem to be setup correctly in the power save application and i am using the Toshiba Power Saver power scheme. I tried to unistnall Power saver and it still does not allow me to go into stand by. I cannot install Common Module because it does not show up in add/remove programs.

Any Ideas? I am getting tired of having to shut down the pc every time I have to transport it. :)

Stephen

Answer:Satellite Pro A210 - Doesn't go into standby

Noone else has had a power saver problem?

2 more replies
Relevance 66.42%

Hi,

I have Windows XP Pro on a Dell Laptop with a Belkin wireless card. The network is provided by an Apple Airport (Dual Ethernet).

Anyhow, the wireless connection works fine after a simple re-boot, but when I come up from standby, the connection doesn't work. I unplug and re-plug in the wireless card, and the networking icon comes up for a moment, then disappears. When I go to Start/Connect To, it says it's connected, and packets have been sent and received. When I look at the details, it says I have a proper IP address, router address, etc.

However, when I open firefox, it says it cannot open the page. Same with thungerbird, mIRC, etc...

Anyhow, I'm wondering if this is a known problem, or what the problem is.

Thanks,

Gabe
 

More replies
Relevance 66.42%

Hi all!

I've got a problem on my notebook after service exchange of motherboard.
After I boot up Windows the IR receiver (Microsoft eHome infrared transceiver) works well in all programs, but when the system goes out from standby the IR receiver unloads from the memory and the hardware search doesn't find it.

So the remote doesn't work until I reboot Windows. Windows XP MCE and Windows XP SP2 have the same behaviour. Before the exchange of motherboard I didn?t' have this problem.

What can I do with this?

Answer:Qosmio G30-195 - IR receiver doesn't work after standby

>What can I do with this?
Contact service again and tell them the same. They should find out why this happen.

By the way: can you use other USB connected devices after waking up from standby mode?

3 more replies
Relevance 66.01%

Hello i own a Satellite L650-16W and after standby-mode the fan doesn?t start again. So the temperature increases untill a reboot is necessary. After the reboot the fan works correctly again. I own this notebook for about 4 month and at the beginning this problem didn?t appear.

I?ve tried to update the bios but it seems to be the actual version. And i don?t find any options to put the fan manually on again. So maybe anybody has got the same problem or a solution.

Thanks for your help.

Answer:Satellite L650-16W - Fan doesn´t (re)start after standby

hi,

> I?ve tried to update the bios but it seems to be the actual version.

in my opinion, bios is a troublemaker. Have you tried to reflash it (not update)?

5 more replies
Relevance 66.01%

hey guys,

I have a problem with my Satellite L550D-11N:
since some time, my standby doesn't work anymore. When I close the lid, it doesnt shut down to standby mode, it just stays turned on. When I then open it again, the screen is black and I don't know what to do. The toshiba power saver settings and those from windows 7 says that the notebook should go to standby when the lid is closed. The only way to reboot the system is holding the powerbutton for more than four seconds and then start it again.

I hope you can help me.

greets
Torsten

sorry for my bad english.

Answer:Satellite L550D-11N - Doesn't go to standby mode

Hi buddy,

Do you use the preinstalled Windows 7 version from Toshiba or did you install your own version of it?

It would be interesting to know what happens if you press FN+F3 key combination for standby mode or if you choose standby from start menu.
Can you check this please?

Otherwise you should try to load the default settings in BIOS.

5 more replies
Relevance 65.6%

I "downgraded" my Compaq CQ60-214DX to Windows XP SP2 following a guide on this forum. There were a few bumps in the road but I eventually got all of the cautions/errors to disappear in device manager.
My only remaining issue is that the audio doesn't work after the laptop goes to standby. My only option is to restart to get the audio working again. It looks like there is a lot of duplication in my device manager but I'm really not sure what normal is.

I have attached a screenshot.

Thanks for all that you do.

More replies
Relevance 65.6%

Good evening, After resuming from standby the background is not lit anymore (like pressing 'Fn' + 'End' -> minimum brightness).I turned off dynamic brightness control in the power management. Doesn't help though. Works after reboot again.Display is a WUXGA. Any suggestions or details needed? PS. Just now I noticed I can't alter my display brightness at all at the moment. Will reboot, but I suspect it will work after that again. Thanks for your help,Phil

Answer:Display background light doesn't work after standby

Now after standby sometimes briughtness is on 5, but I can't change it at all. Reboot helps. Somebody any ideas? Thanks,Phil

3 more replies
Relevance 65.6%

I use Xp Home and nwo whenever I try to search somethign , ANYTHING , i get a dialog box , on which only F....... and some ... aer writtten , and there is no error no nothing , just that dialog box , on which I hve only 1 button to click after which I go back to search page.
Is there any service required to run in the startup for it to work ??

Coz I have turned off many services , but that was a long time ago, this started happening recently
 

Answer:Search function doesn't work now

Have you checked to see if the search function works in SafeMode?

Have you installed any updates to the current software like your AV program for instance?

Anyway, the first thing I'd try would be to run SFC from a command prompt within Windows XP and see what happens

sfc /scannow

BTW, in reference to the services, I doubt that's an issue. Windows XP will start a service if it's needed, regardless of whether you've disabled it.
 

2 more replies
Relevance 65.6%

Newly installed Windows XP has no search function

I repeat NONE
 

Answer:My Search function doesn't work

If you have taken anything out of startups via msconfig please go to Start – Run – type in msconfig – click OK and click on the Startup tab. Put a check mark beside everything you see listed there and then please do the following:

Click here to download HJTsetup.exe

Save HJTsetup.exe to your desktop.
Double click on the HJTsetup.exe icon on your desktop.
By default it will install to C:\Program Files\Hijack This.
Continue to click Next in the setup dialogue boxes until you get to the Select Addition Tasks dialogue.
Put a check by Create a desktop icon then click Next again.
Continue to follow the rest of the prompts from there.
At the final dialogue box click Finish and it will launch Hijack This.
Click on the Do a system scan and save a log file button. It will scan and then ask you to save the log.
Click Save to save the log file and then the log will open in notepad.
Click on "Edit > Select All" then click on "Edit > Copy" to copy the entire contents of the log.
Come back here to this thread and Paste the log in your next reply.
DO NOT have Hijack This fix anything yet. Most of what it finds will be harmless or even required.

 

3 more replies
Relevance 65.6%

My function keys doesn't work. I have tried to find drivers on HP support, but can only find for OP Windows 7.BR/Torsten

More replies
Relevance 65.6%

Please bear with me as this is my first post here.I must have picked up something from the internet that is causing havoc with my computer. It resets my homepage automatically to some page I have never seen. Also I can no longer access explore from my computer nor control panel. My computer locks up everytime I try to explore to see what's been added to my system. Please help if you can.Thanks

Answer:explore function doesn't work

Download, install, update, and run AdAware and SpyBot.

5 more replies
Relevance 65.6%

Win 7 Home Premium version Svc pack 1; Toshiba Satellite L505. I can't get the Send To function to work when I right click in Librarys. Specifically, I want to send a picture to One Note. I have done the proper steps with no result. What am I missing?
 

More replies
Relevance 65.6%

When I go to "search" I get the basic box but it is empty. There are no options within the box. What files make up this function? If I can pinpoint what is missing I think I can get it working again.

I search by hitting Programs, then search. Win XP 1 gig ram, 250 gb HD etc. I think a malware program deleted a file thinking it was bad.

Bill

Answer:Search function doesn't work

Hello Bill


Open Explorer and go to the Windows\Inf folder.
Locate the srchasst.inf file. Right click it and select Install.
You'll need your XP CD or the files from the I386 folder.

The Windows\Inf folder is a hidden folder. You can adjust your Explorer Folder Options (View tab) to Show hidden files and folders.
Windows Explorer/Tools/Folder Options/View
Check ?Show hidden Files?
Uncheck ?Hide protected system files?
Apply

You can also click Start, Run and enter %SystemRoot%\Inf to open directly to the Inf folder.

.

5 more replies
Relevance 65.6%

after a dramatical crash of hdd I have to change with another .

I used restore system dowloaded in a usb key and everthing worked prperly except fn key that doesn't open menu with grey keys .

in eg. I can't turn-off wi-fi device . someone can help me?

thanks a lot for now .

P.S. I apologize for my poor english so that I'm asking if is possible respond esily or better in italian .

Answer:Function key doesn't work properly

May I ask you what notebook model do you have and what Windows system is currently preinstalled?

6 more replies
Relevance 65.6%

As for a few days ago, i was playing csgo ( a online game ) and after some few hours i came back and then i tried to click ESC as it seems it didn't work. NB : I have not spilled anything on my pc whatsoever. So i tried to go on another game which wasn't csgo and then tried using hte function keys, but only f1 and f11 was working. When i went to my browser it seems it didn't work either. My computer is a Acer Aspire V5 - 531 Thanks.

Answer:Function Keys and ESC doesn't work?

Hi Raidy Try using System Restore, back to when it was working ok.  If this doesn't work, go to Device Manager & locate your keyboard. Right click & select uninstall. Restart, now hopefully things will work! If you need to use a keyboard, try connecting a USB one.

9 more replies
Relevance 65.19%

I've been using my computer almost a year. Recently, maybe after updating to winXP SP2, the only way to start up my comp after putting it in standby mode is to witch power off and then start up. The hibernation mode works properly. What am I to do?

Answer:Satellite P25-S507 doesn't resume from standby mode

Have you installed Software that "didn't like" to standby ?

Or do you changed or upgraded your Memory ?

2 more replies
Relevance 65.19%

Hello, Ever since I recently got the X220, the sound does not work after resuming the computer from standby or sleep mode. The sound will initially works when booting up the computer and logging in, but once the lid is closed and reopened later, the sound does not work. Any help would be greatly appreciated  Christopher

Answer:Sound doesn't work after resuming from standby or sleep mode

hey capei,uninstall the current audio driver that you have installed. let windows install its generic drivers.test the audio of yours and see if the same issue occurs. later on, visit the support site via http://support.lenovo.com and update your audio drivers accordingly





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

1 more replies
Relevance 64.78%

I run a Lottery syndicate and have all the Saturday draw history from the start, (Nov 1994). We don?t do the Wednesday draw.I have a spreadsheet which checks the numbers weekly on one worksheet and automatically updates another worksheet which shows the frequency of the numbers drawn. Works fine.I have now today tried to run a frequency check on the EuroMillions draw. I downloaded the Draw History from Camelot and imported it into Excel.When I apply the Function =COUNTIF($b$5:$f$210,m1) it returns drawn numbers 1 to 4 as 0 (zero). I have physically counted each of these numbers and 1 has been drawn 28 times, 2 = 14, 3 = 27 and 4 = 19.The range b5:f210 contain the 5 main drawn numbers. Column M contains the ball numbers 1 to 50.All numbers from 5 to 50 have a frequency number.This is the same Function I am using in the Lottery spreadsheet, except of course, the range is bigger and there are only 49 numbers to be drawn.Also, column A contains the Drawn Date which is in the format yyyy-mm-dd and I have tried to change it to dd-mm-yyyy but it doesn?t like it.Any help appreciated, thanks.

Answer:Excel Function doesn't work properly

Sorry Guys. False alarm on the Function.I looked hard and long at it again just to make sure I have typed it all in correctly. I made a mistake. It should have been m5 at the end and not m1. That bit has now been rectified but I would still like to know how to re-format the date.Thanks.

5 more replies
Relevance 64.78%

I have about 600 gigs of storage space and windows search doesn’t work so I’m a bit frustrated at this problem.

When I run windows search function I get 2-3 recently created files and nothing else. The process of getting these results take less than a second sometimes and it doesn’t comb threw my folder structure the way it used to. I have indexing on and I’ve had indexing off but this does not effect the results. I’m not sure when this problem first popped up but I assume it was about 4-5 months ago when my step dad changed my network settings because of some bad advice from some tech support who didn’t know what kind of system I had.

I’ve tried using “Windows Desktop Search” and that didn’t work either so I uninstalled that. I don’t want to use 3rd party search programs just because the windows search has worked fine for me so far with the exception to this. Any help is appreciated

Thanks.
 

Answer:Windows search function doesn't work

Start -> Search -> Files and Folders -> More Advanced options -> check around there..
 

3 more replies
Relevance 64.78%

"Send a link" function does not work
I get a message that says “Microsoft exchange server is unavailable”.

the exchange server is available however, because i'm able to send email, and use all the functionality of email.
 

More replies
Relevance 64.78%

I recently installed new hard-drives, 1 master and 1 slave. I still have all of my data from the new drive transfer, I can install and run programs on my new drive, but some of existing applications aren't working properly.

The most critical is my problem with " System Restore". Everytime I run System Restore from the Start Menu > Accessories > ... , I get the pop up for debugging it. The pop up is the grey box that says "Send Error Report or Don't Send". While it was working I used it everyday, but now it always crashes when I open it up. What happens if something bad happens to my PC, how will I be able to restore my PC to an earlier secure stage? Please help me, it's critical that I get use of my System Restore back again. Do I have to reinstall WinXP again or what?

Microsoft Word keeps telling me to "repair" the program everytime I open up a word document. Now, I'm able to open up a word document, read it, edit and save. But when I open them up it also talks about the repair, a "Windows Installer" box pops up, then disappears, afterwards telling me to reinstall\repair Word 10.0 or something like that because there's an error in Microsoft Office. Should I reinstall\repair my Microsoft Office CDs?

Answer:System Restore function doesn't work!

MS-MVP Bert Kinney has a terrific site on System Restore, including how to use the .inf file to restore the service. Recommended: http://bertk.mvps.org/

Bert also is the moderator for the System Restore Subforum on AUMHA. You might want to peruse the answered questions there or leave a new post: http://www.aumha.net/

4 more replies
Relevance 64.78%

I can't use or run "restore" anymore on XP machine. I have no idea what happened. I don't seem to have any other problems.

Bill

Answer:Restore function doesn't work anymore

It sounds as if System Restore may have become corrupted. You can try reinstalling the feature. Here's how:In Control Panel or Windows Explorer, click Folder Options and then View tab
Under Advanced Settings, scroll down and find "Show hdden files and folder." Check the box.
Find "Hide extensions for known files types." Uncheck that box. Click Apply, OK.
In Windows Explorer, find your Windows folder (usually on the C: drive but not always). Navigate to the inf folder and open it.
Find a file named sr.inf
Right click the file and select Install.

Important: This creates a new installation of System Restore, but it will delete any restore points that you had created previously.

kind regards,

4 more replies
Relevance 64.78%

In Excel 2003, I have instructed that there be a sum of the dollar amount based on the grouping of each change of account number in another column.

What happens is that there are several subtotals of the same account number.

How to rectify?
 

Answer:Subtotal function in Excel doesn't work as it should

8 more replies
Relevance 64.78%

I recently upgraded my 3 computers to Windows 8.1. Only 1 PC (INTEL) is working as it should. The other 2 PC's are AMD based and the search function is acting funny. When I search it gives my the results, but when I click on says I'm looking for DEVICES AND PRINTERS and I search "printers", it gives my the result. If I click on DEVICES AND PRINTERS tab it doesn't respond, but when I click on say my Canon printer's link to MY PRINTER it responds. I ran SFC/SCANNOW and also DISM (Micorsoft actually ran it) and nothing changed. It sometimes locks me onto the Meto screen and I have to reset the PC to get back to my normal Desktop. When it does that non of the Metro tiles works. Micorsoft technician also tried to create a new user account which comes out blank and when creating another account, as soon as you log into the account it immediately signs out of it and don't allow you access. I tried to refresh the pc, but the frustrating part is, it asks you to choose a keyboard layout, but disables all USB and PS ports. Now how do I choose a keyboard layout, unless I have a touch screen. Microsoft really didn't think this trough. Is there anybody that perhaps now how to get the searh to work. Oh I do have searchindex.exe in my system32 folder and in services I stop and restarted Windows Search, but still no change.

Answer:Search function in Windows 8.1 doesn't work as it should

Problem solved. After Microsoft technicians tried everything and my PC crashed I decided to just redo. Then I found out that a program called Wisecare 365 that I was running on my Windows 8 PC caused all the problems. It went and deleted registry and other files that windows 8.1 need to operate with. So it's no longer on my PC and so far Windows 8.1 is running fine.

1 more replies
Relevance 64.78%

Greetings,I have a newly acquired T540P which I nuked the hard drive and installed Win10 Enterprise from scratch.  I installed the Lenovo software which appeared to install all the Lenovo drivers.  My keyboard in device manager still shows Standard PS2.  I installed the l_enhanced_performance_usb_keyboard2024 from Lenovo's web site and device manager still shows Standard PS2.  Function F1 - F6 work fine.  Function F7-F12 do nothing.  This means I cannot turn off the wireless which I need to do several times a day without disabling it in device manager. What does it take to get the rest of the function keys working?

Answer:T540P Wireless Function Key Doesn't Work

Bump. . . 

3 more replies
Relevance 64.78%

Hey everyone, I'm running a T450s Thinkpad on Win10. I have a very annoying issue; the function key for adjusting screen brightness doesn't work anymore. I guess it got 'broken' by Win10, but anyway, i can get it fixed. Tried installing new drivers for graphics and monitors but nothing helped so far... Grtz,Ewoud 

More replies
Relevance 64.78%

I have a Qosmio F10, the TV Function has never worked properly when trying to watch TV in the Media centre Mode, only when switched on without goint through windows.

I have connected the aerial to a loft aerial which provides a perfect signal for other Televisions.

When I go to settings it always comes up no signal found any ideas?

Answer:Qosmio F10: TV function doesn't work properly in the MCE

Hi

Please check your TV tuner driver version.
On the Toshiba driver download page I have found a new driver version.
I recommend to download it and to install it.

10 more replies
Relevance 64.78%

hi,

i upgraded to Windows 7 from Vista, since that the function task bar I press FN bottom does`t appear. I have Qosmio G30

Any help appreciated,

Answer:Re: Function taskbar doesn't work on Windows 7

Hi

If you make a forum search, you can find many threads dedicated to your problems. Go to the Toshiba driver page and download the Vap utility and Flashcard support.

http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

4 more replies
Relevance 64.78%

I have a new Toshiba Satellite Pro A300/ PSAJ1E - 018006EN with similar problems too.
When mine goes into sleep mode it will not re-start unless the power button is pressed 'numerous' times, eventually it powers up, but in safe mode and everything that was being worked on is lost.

Answer:Satellite Pro A300 PSAJ1E doesn't wake up from standby correctly

Hi

I have read about the similar issues? Mostly the display stayed blank after coming from standby or hibernation?

This could be solved by updating the BIOS to the latest available version and by updating the OS.

Please do this firstly?

4 more replies
Relevance 64.37%

Hi All,
I tried flashing my BIOS through windows as recommended on my Laptop Manufacturer (Toshiba) website. I guess the process went wrong as after 2 hours still the message "Do not interrupt" was getting displayed. I had to force power off my PC. Now it is not booting up.
The Laptio is Toshiba SA50-114, Satellite series.Model No - PSA50E

I have tried suggestions in following link
http://askiris.toshiba.com/ToshibaSu...200%2035586212
However, this did not work.

However, I don't have the recovery disk tool and BIOS/ROM file. Have tried searching on internet, but with no results.

Can someone please help me with
1. How can I perform the BIOS update to get my PC running back.

2. Point me to links where I can find the files in the above link.

Many Thanks in advance.
Best Regards,
Parag

Answer:Satellite A50 doesn't function after BIOS update

> 1. How can I perform the BIOS update to get my PC running back.
Not possible if your BIOS ROM module was wrong flashed.
If you are a lucky man then only the ROM module must be flashed again using an special procedure. But this can be done only by an authorized service provider in your country.

> 2. Point me to links where I can find the files in the above link.
There is no link! You will have to ask the ASP for the help.

Bye

2 more replies
Relevance 64.37%

Just upgraded my Lumia 950xl to Windows 10 Anniversary edition software and now the settings doesn't function at all. I click on settings and it tries to connect but then goes back to the alphabetical list of items . All other items when I click on them they work and open up. All except Settings.

More replies
Relevance 64.37%

I recently installed XP with SP3 on this laptop but the wireless function key doesn't seem to want to work. All the other ones are working no problem but not this one.

Any ideas? I have installed the utilities driver.

Answer:Poerege R700-15R and WXP SP3 - wireless function key doesn't work

All FN+Fx keys work except FN+F8? What happen when you try to use FN+F8 key combination? Is there some message?

Have you installed all stuff offered on Toshiba download page?

7 more replies
Relevance 64.37%

when i try to copy a called phone number by holding down on the text the only choice i'm given is to delete the number - why don't i get options to "forward" or to "copy"?

More replies
Relevance 64.37%

Hi All,

since one week, i have great problems with my notebook. On my notebook, i have three different windows-systems on 3 different partitions installed. On every system, my notebook tells me, the i have to change the battery imediadly. But: i don't have my battery in my notebook. I'm always working with my ac-power-adapter.

The problem is, that my notebook shoes the battery-status in the taskbar and the notebook ist changing into the styndby-mode after one minute, when i doesn't work with it.

These symthomes are on every of my three systems, so i think, there must be an hardware-defect.

I can't lokate the defect. Did everyone has an idea how to fix this problem?

Thanks for your help

Greetings from Bremen/Germany
Thomas

Answer:Energy-Function doesn't work correctly (SP6100)

Hi Thomas

I don't have a solution to your hardware-problem but maybe you could stop the machine from going in to Standby mode if you go into the actual powersaving profile and disable it from going into standby? Normally there is a number of rules like "When running on battery and no activity within X number of minutes do [this]" and [this] can be nothing (which would suit you) or go into standby, or go into hibernation.

To get the general problem fixed I would suggest contacting a service partner.

BR

Tom

3 more replies
Relevance 64.37%

My windows shutdown does not respond. I can only shut down through manually pressing the power button or through Log off-change user-windows shutdown-shutdown.

Help pls.

Answer:Windows "Shutdown" function doesn't work properly

Hi

It?s not easy to say why the shutdown function doesn?t work properly.
But mostly the wrong or damage registry entries are responsible for such issues.
You can try to use the system restore tool to roll back the OS to the early point.

Additionally you can check the Microsoft document which describes shutdown problems in Windows XP. It?s useful. Check it.
http://support.microsoft.com/kb/308029/EN-US/

2 more replies
Relevance 64.37%

After recently purchasing a new pc, I have found that my copy and paste function no longer works correctly. When I copy something, half of the time it does not paste, or pastes a random single letter.

Is this a problem that could easily be fixed, or could it be something that has infected my pc?

Thanks in advance.
 

Answer:Copy and Paste function doesn't work properly?

6 more replies
Relevance 63.55%

Hello. I made a clean Vista installation from my recovery partion and installed new drivers for all controllers. But the NetXtreme Gigabit Ethernet NIC  is pain in the ass.I have to disable/enable it every time after R60 went out from sleep state to get LAN work. NetXtreme's  driver version is 10.39.0.0 which seems up-to-date. Any Idea? P.S. Power managemet  WOL option - Wake up from a Magic Packet - is enabled. May be this is the case?  





---------------------------------------R61 upgraded to Windows 7









Solved!

Go to Solution.

Answer:R60's Broadcom NetXtreme Gigabit Ethernet NIC doesn't work after standby/wake up in Vista

When I unchecked the 'Wake up from a Magic Packet' option and checked 'Allow to turn off the device for saving power' NIC works with no problem after standby/wake up transitions.  Does anybody use WOL? Before facory reset of Vista WOL function was OK.





---------------------------------------R61 upgraded to Windows 7

2 more replies
Relevance 63.55%

My wireless HP keyboard Sleep function used to work perfectly before Windows 10 install. Simply used to hit the Sleep button to close down, and then again to reactivate the computer. Since installing Windows 10 it works to shut down, but does not reawaken the system. Very annoying - I don't want to have to open my laptop and hit the Power button every time, please advise how to resolve.

Answer:Why doesn't the wake from Sleep function work after Windows 10 update?

At this time, the best thing I can suggest is to report the issue via Windows Feedback to make sure that Microsoft is aware of the issue. There are others reporting this issue on the Surface Pro 3, so this is not an isolated incident.
Also see, http://forums.windowscentral.com/ask...ter-sleep.html
There are more threads as well, but just to let you know you aren't alone. It's not a solution, but reporting to Microsoft will help lead to a solution faster.

3 more replies
Relevance 63.55%

Hi,
I've had this problem for quite some time and I think its about time I tried to sort it out.
I have a Toshiba satellite Laptop running windows XP and the latest WMP is my preferred media player.

About a year ago I had a Virus on this laptop that wouldn't allow me to connect to the internet. A friend took me through the steps in the security and the web part of this board and we dealt with the virus.

Ever since the play all function in windows that appears when you have media files in a folder has not worked. When I click play all I see the hour glass briefly but then nothing happens. If I try to select the files I want to play right click and then play all again nothing happens.

I don't get any warning or error messages, its as if the computer is ignoring my request

double clicking on a single file opens it in WMP normally.

I don't know if it is related but when this happened the quick media buttons on the laptop which allowed me to open WMP, play, pause, stop and select next track also stopped working and still don't.

Thanks for your help.
 

Answer:Play all function doesn't work for music or video files

To fix the file playing issue, try reinstalling WMP.

The buttons need special software installed and running. Try downloading it from Toshiba and reinstalling.
 

2 more replies
Relevance 63.55%

Recently I've come across a situation where my computer will boot with no keyboard function. I cannot enter bios, boot in safe mode, etc. However, upon Windows 7 loading I have full function of the mouse. That is until I hit any key on the keyboard, then I lose left click function only. I can still move the mouse, I can still right click with the mouse. I also noticed that caps lock and number lock did not work either.

I figured that maybe the keyboard was bad and so I plugged in a different brand new keyboard and booted up the computer. Everything worked fine. The keyboard worked flawlessly, the mouse had no problems at all.

Restarted the computer to install windows updates, and upon the next boot I once again was left with no keyboard function and then once again no left click function.

These problems only began after a program was uninstalled due to it freezing up during use. (The program was a puzzle game that was purchased and installed from a reputable game website)

I am at a complete loss, and I cannot tell if this is a hardware problem or a software problem or even a virus problem.

Both the mouse and keyboard are USB. Other USB devices work fine, including a headset, a printer, and a scanner.

Any help is much appreciated!

Thanks in advance.

Answer:Keyboard doesn't work, then mouse begins losing function

No one can help me?

2 more replies
Relevance 63.55%

On my Portege M200 i reinstalled WXP Tablet 2005. Under human interface devices it detects a wacom serial penn tablet, a usb human interface device, and a hid-compliant device.

But the penn doesn't fucntion at all. When i upgrade to the latest wacom penabled drivers, i get a device "wacom penabled HID miniDriver" but it has a yellow triangle with the error that this device cannot start error 10.

Is my tablet broken?

(apparently you can't say penn on this forum)

Answer:Penn tablet function doesn't work. HID device cannot start

Hi

May I ask from where did you download the driver?
It seems the driver is not supported or not compatible.
The code 10 means -> Device failed to start.
You should simply use the driver from the Toshiba page and click Update Driver to update the drivers for this device.

4 more replies
Relevance 63.14%

Any drivers or solutions available?
Model: Satellite L50-B-2CN
DVD HW: cddvdw su-208gb
Status in Device Manager: OK

The drive does not appear in the folder menu. I insert DVD or CD and cannot find it to play

More replies
Relevance 63.14%

I have problem with FN button. It was worked when the operating system was vista, but after I upgrade my operating system to Windows 7 the function task bar that should appear at the top of screen when I press FN bottom does`t appear!

So, can you tell me how I can solve this problem, please?

My Laptop mode is Satellite A300-29N

Answer:Satellite A300 - Function taskbar doesn't appear anymore on Windows 7

Hi

I had the same problem after upgrade to Windows 7 but the solution was pretty easy: I have searched a little bit here in forum and founded out to install the newest Toshiba Value Added Package.

You can download it here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

Check this!!!

4 more replies
Relevance 63.14%

When i bought my laptop one month ago, i got a message about usb hub energy peek (i hope this is the right translation, because i have a Dutch version) everytime i startup from standby.
On the windows site it was told that you can switch off this message, so i did.
But now when i start the laptop from standby, my usb-devices will not work anymore.

Can someone please help me to solve this problem. Or can someone tell me whether this is a hardware-problem which only can be solved by returning the laptop to Toshiba?

Answer:Satellite A100-405: after going from standby USB devices will not work

Hi

You need to update the BIOS again!!! There is an new version 5.20 available!!!

This should fix the problems which may occur after updating to Bios version 5.10.

Please come back and report if this procedure has helped or not! Bye

6 more replies
Relevance 63.14%

The F11 key where I can switch the sound on/off doesn't work!
The other keys are working fine.

Anybody knows how to give back it's function?

Answer:Satellite Pro C50 A-153: F11 function key does not work

Hi

Are you using the ?Special function mode? or ?Standard F1-F12 mode??
The ?special function mode? allows you to use special functions without pressing the FN key.
This means that if special function mode is enabled, you need to press only F11 to turn the sound on and off. In case the special function mode is disabled, you have to press FN+F11 to turn the sound on and off.

You can enable or disable the special function mode in:
Desktop -> Desktop Assist (in task bar) -> tools & utilities -> Function key

But I'm wondering if the F11 button works using other software?
For example: pressing F11 button while using Internet browser (internet explorer) should enable the Full-screen mode. Can you check this?

Maybe the F11 keyboard button is faulty and therefore the sound ON/Off function does not work

3 more replies
Relevance 63.14%

The Funtion Key (Fn) does not work on my computer
And I do not know how to solve this problem

It worked once (with all F1, F2 etc) but it doesn't work now

PLS HELP ME !

Thanks
Bart

Answer:Function key does not work on Satellite A50-109

If you press the FN-Key, does a LED under the F-Keys (F10,F11,F12) lights up? Did you flashed your bios or changed something on your bios-configuration?

Greets

5 more replies
Relevance 62.73%

I have Sony MW600 bluetooth headset.
I try pairing lumia 1520 success and can play music listening but not work bluetooth call function.
So I try MW600 pairing with Android phone, it can all functions(listening music and bluetooth call).
Why not work bluetooth call with lumia 1520?
Sony MW600 is not compatibility lumia 1520?

Answer:Sony MW600 doesn't work call function with lumia 1520

Have you contacted Sony and asked them? Contact us - Sony Smartphones (Global UK English)

4 more replies
Relevance 62.73%

I have a Gateway PC, 5 or so years old, running Windows XP Media Edition.

A few days ago, soon after having installed some Windows updates, my wireless Microsoft mouse and keyboard stopped working. I plugged in a spare PS/2 mouse, and in the bluetooth dialog box removed, added, and reconnected both components. The wireless mouse and keyboard worked, but not for long. I then uninstalled and attempted to reinstall the mouse and keyboard software (except that the software apparently had not uninstalled). This did not fix the problem.

From here on I tried so many things, I do not recall in what order. I did a system restore via Advanced System Care, then tried again using a much earlier date. After a very long wait I was informed that my system could not be restored to that date.

I ran Reimage, which reported a moderately severe stability problem with numerous crashes. This program fixed and replaced files, etc, but got stuck while attempting to reinstall Windows updates (during repairs, Reimage removes Windows updates and reinstalls them afterward, but for some reason this last step has never worked with my computer and I've had to reinstall the updates manually). The computer was frozen and I was forced to turn it off using the power button. When I turned the computer back on, I had no working keyboard or mouse, and again had to use the power button to turn off the computer.

I plugged in a PS/2 keyboard and started the computer in bios, resetting bios to default sett... Read more

Answer:Keyboard has limited function in safe mode, and mouse doesn't work at all

Advanced System Care, which fixed a lot, especially in the registryThe IObit program is just a Registry Cleaner that will repair almost nothing, except your hope - You will never know if it repaired anything -You are better off to remove all Chinese IObit programs and only use proven programs for your computer Malwarebytes and Advanced System Care will not operate correctly on the same system, as both clash with each other Malwarebytes Anti-Malware is a proven and trusted program world wide, while IObit is forced on Chinese users as their options are limited.Do you have a Regular Antivirus program that is active and is scanning at all times ??Thank You -

1 more replies
Relevance 62.32%

After I switch my Satellite A200-244 from "sleep" or "hybernate" the USB ports do not work!!!!

Answer:USB ports do not work after waking Satellite A200 from Standby

Hi mate,

did you already tried this:

Open start and type Device Manager and then hit enter, to start the device manager. Click the + next to "Universal Serial Bus controllers" and then in that list, you should see some devices called "USB Root Hub". For each of those, right-click, hit properties, go to the Power Management tab, and uncheck the box next to "Allow the computer to turn off this device to save power." Then restart.

Maybe it works. Another workaround could probably be this Microsoft KB document:

http://support.microsoft.com/?scid=kb%3Ben-us%3B812946&x=8&y=9

Greetings

2 more replies
Relevance 62.32%

Help me!

I have a Satellte T130, yesterday I run an unknown software and after that the BIOS has been changed. Now FN+F* funtion can not work, so I can not use projector. I have already run BIOS update version bios-20100531110112 but it still not work.

Some body who know please help me?
Thanks!

Answer:Satellite T130 - FN+F* function not work

Hey,

Which unknown software you started exactly?

I assume nothing is changed in BIOS because it doesn?t control FN keys. Therefore you have to reinstall Toshiba Value Added Package. It contains the driver for FN key combinations.

You can download it here:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers

Check also the forum for similar threads, you will find enough!!!

3 more replies
Relevance 62.32%

Hello All,

I have a old M30-107 which i recently reinstalled and updated the OS on.
The Function keys controling the screen brightness, volume etc do not seem to be working.
I believe I have updated all the drivers for the laptop.

Is there a specific driver ( ie chipset driver pack) I should be looking at that controls these function keys or should they work with out ant intervention from driver packs etc bios related???

Sat M30-107 XPHome edition SP3

Thanks in advance.. C.

Answer:FN function keys don't work - Satellite M30-107

Satellite M30-107 is a part of the PSM30E series. Is it right?
You could check this number if you would look at the bottom of the unit. There should be a label with such model number.

Go to the Toshiba European driver page and search in ARCHIVE area.

Choose +Archive -> Satellite -> Satellite M series -> Satellite M30 -> Win XP+

You have to download the *Common Module*

This Common Modules must be installed at first!!!
Then you need to install additional software like Touch Pad On/Off Utility, Hotkey Utilities for Display Devices.

These programs will enable the Fn buttons

3 more replies
Relevance 62.32%

like all of u ? installed win 10..everything is working fine... but when ? opened chrome ? realized that elan smart touch pad wasn't  working with all function..yes ?t's working no problem..but before ? installed win10  ? could use all function one click/double click/three fingers click.. now no option for edge scroll or no option for two finger or in clicking menu there is no option for two and three fingers just left corner and right corner...  on lenovo support page ? found win10 driver for this program.. and ? deleted older one and installed new driver. the result wasn't chanced.. still ? can't use smart touchpad fully..are there anyone help me for this problem???

More replies