Computer Support Forum

How to reduce FAN noise on Portege M400 with Vista?

Question: How to reduce FAN noise on Portege M400 with Vista?

M400 (*_VISTA_* with most recent utilities for power model) FAN permanently blows very noisy regardless of real cooling need.

Even with zero job loaded, under 1% activity (flat curve), 50 % processor speed in the power model and all power parameters at the minimal value, FAN does not reduce speed. After a restart, for a short time, the noise is supportable, we can conclude that the FAN seems to be capable of low speed.

_Problem is the same even if M400 is outside by 9° celsius !!_

On all M400 we have, problem is the same.
How to work with M400 in a quiet environment ?



Message was edited by: Admin

Relevance 100%
Preferred Solution: How to reduce FAN noise on Portege M400 with Vista?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: How to reduce FAN noise on Portege M400 with Vista?

Hm, I wonder why you open a new thread. I mean, I readed the last one and the solution is the 2.1N BIOS.

So, please contact a Service Partner to install that BIOS or google for it, since theres no other solution at the moment. :(

Sorry mate

12 more replies
Relevance 99.47%

M400 (vista with most recent utilities for power model) FAN permanently blows very noisy regardless of real cooling need.

Even with zero job loaded, under 1% activity (flat curve), 50 % processor speed in the power model and all power parameters at the minimal value, FAN does not reduce speed. After a restart, for a short time, the noise is supportable, we can conclude that the FAN seems to be capable of low speed.

On all M400 we have, problem is the same.
How to work with M400 in a quiet environment ?

Answer:How to reduce FAN big noise on Portege M400 with Vista

Which BIOS version is installed on your Portege M400?

12 more replies
Relevance 93.07%

I have a new Portege M400. The fan runs continuously even when the computer is booted from cold. The CPU is definitley not running hot enough to need the fan. None of the settings in the TOSHIBA Power Saver cause the fan to turn off, even the Long Life setting. Is this a BIOS problem? Or a hardware failure? Or what?

Answer:Portege M400 fan noise

Hi

Did you use the Toshiba image?
I have found information that on some units the BIOS update benefits the Toshiba Power Saver features. What you can do is to check the installed BIOS version on the unit and compare it with the available version on the Toshiba page.

However, I would recommend also reinstalling the power saver. Check if new version is available. You can also try to clean the fans. Mostly this procedure helps.

11 more replies
Relevance 89.79%

The new BIOS release (1.8) for Portege M400 solves the problem of fan noise. The readme.txt explains that the temperature will be increased only in three degrees. Very important patch, very recommended for M400 users.

Now i can use my tablet in my business meetings without having to give explanations to the clients of the noise of the ventilator.


Greetings.

Answer:BIOS update has solved fan noise of Portege M400

Hi,

good to hear that Toshiba has done something against this annoying thing. Thanks.

Bye

5 more replies
Relevance 81.18%

I've recently upgraded my M400-146 to Vista Ultimate (32-bit) and Vista runs ok, but not quite as well as expected. If I compare Vista Experience Indexes across a few systems, the M400 compares pretty poorly.

On the M400 (Core 2 Duo 2GHz + 2 x 1GB PC-5300) I get an experience index of:-

Overall Score = 2.6, CPU=3.9, Memory=2.6 (other values seem ok)

On a desktop system (Core 2 Duo E6600 + 2 x 1GB PC-6400 (DDR2 1066), integrated Intel graphics) I get:-

Overall=3.8, CPU=5.3, Memory=5.6 (limited by integrated graphics)

On one non-Toshiba laptop (PM-1.8GHz, 2x1GB):-

CPU=3.8, Memory=4.0

So the laptop with a much slower CPU and RAM that's much slower than the M400 scores better for Memory and just about the same for CPU.

One thing I have seen is that Vista describes the experience index as 'Unrated'. If I run WinSAT manually always see errors about 'RDTSC to QPC delta is too high'.

Has anyone else seen the RDTSC to QPC delta error? What Experience indexes do you get?

I should also say that I've compared the performance of the M400 with SiSoft Sandra running both XP & Vista, under Vista Sandra reports just under half the performance of XP on every measure!

Mike

Answer:Portege M400: Vista performance

Hello Mike

What to say? Many people are disappointed with Vista performance. I must be honest to you and say that this fact does not wonder me at all.

I do not have this small and nice notebook but you should try to optimize OS on your own needs and also disable all stuff you don?t need for your work. Maybe you should not be focused on this score shown by Vista but try to optimize the system to run stabile and fast enough for you.

BTW: have you updated BIOS to latest version 3.20?

5 more replies
Relevance 81.18%

Hi

I have upgraded my M400 to Vista and now it seems I have a problem with the driver for my DVD drive.

I don't see a vista driver for the DVD drive.

Any ideas?

Steve

Answer:Portege M400: Vista does not see the CD/DVD drive

Vista uses the own Microsoft driver and you don?t need any special drivers to get the CD/DVD drive working.

3 more replies
Relevance 80.36%

Hi,

If you have vista on M400 and experience freezing, just go to Intel and install the latest driver http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=2301&lang=eng

It is really worth it. I was about to return the machine and now i am in paradise!

See you!

Answer:Portege M400 freezing with Vista - Solution!

Hi

Thanks. It?s very nice information.

PS: I will install the Vista in the next couple of days on my Sat notebook.
I wonder I it will work.

2 more replies
Relevance 80.36%

With new RAID driver and utility (september 2007), you can use the RAID1 function under vista with Portege M400.

Answer:Portege M400: RAID1 under VISTA is now working

That?s a very good information.
Glad to hear that? ;)

1 more replies
Relevance 80.36%

Hi there!

I've got a problem with my Toshiba Portege M400 (don't know if this is a topic for the vista board or the portege support board, anyway). I've installed the Vista Express Upgrade some month ago and everything worked fine for some time.
But during the last 4 weeks, my laptop seems to have a problem when shutting down. It doesn't matter if it just hibernates or shuts down completely, the computer automatically turns itself on after being off for about 5 seconds.
I have to use the power switch to turn it off again (and then it stays off). Any ideas? I haven't changed anything and it might be a hardware problem but my guess is that it has something to do with Vista ;)

Thanks

Alex

Answer:Shutdown problems under Vista with a Portege M400

Hi,

did you installed some software or tools/applications/updates? Sometimes a little update can disturb the whole system and preventing it from proper function. So, just check what was installed and maybe it would be useful to install the newest bios, maybe update all drivers etc.. to make sure everthing is updated and actual.

Greets

2 more replies
Relevance 79.54%

I'm a owner of a Portege M400 (PPM40E) and recently upgraded my operating system to Vista. All new drivers work fine except the one for the *TPM*. Here's what happens.

The installation of the Security Platform goes fine. I can create a Personal Secure Drive (PSD), load and unload it until the first time I turn off my computer.
After each attempt of loading the PSD is replied by a crash. Two seconds after the password submission I get a blue screen which informs me the source of the problem: *PFN_LIST_CORRUPT*, a memory dump file is created and the system restarts.

Did anyone else experience this problem? Does anyone know how to restore the data from a manually created backup of the PSD? The restore dialog doesn't accept the **.fsb* file.

It would be great if someone could help me with this one as I have no "unencrypted" backup of the files I had stored on the PSD.

Thanks in advance,

Rob

Answer:Portege M400 and Vista - PSD load ends with crash

Hi

I have googled a little bit and found some details about PFN_LIST_CORRUPT error message.
The PFN means Page Frame Number and it describes the division of single frames of main memory where the application commands or driver running.
If an driver or application exceed such frame then a BSOD will appear.

Here are some hints and proposals to solve such issue which I found on some external webpage:
- update the BIOS and set it to the default settings
- reinstall and update the display driver, sound driver, LAN driver, etc?
- reinstall the Security Assist,
- update the Windows OS

In worst case this issue could be caused by RAM malfunction and in such case the RAM modules should be replaced.

Sorry but I didn?t find more infos regarding such issue.

1 more replies
Relevance 79.54%

Hello there!

Can anybody tell me, how to use the buttonsetting.ini to configure the buttons with the TBSbtnSt.exe.
Best result would be to get the Coursor- and Rotation-Buttons in the display-lid to work under Vista.

Thanx for hints!!!
Greetings Jochen

Answer:Portege M400: How to configure control buttons under Vista

Hi

On the Toshiba European driver page you will find all necessary Vista drivers for a Portege M400.
There is also an ?Button Support? driver and this driver allows you to customize and preset TOSHIBA special button settings.
There is also an Tablet PC Extension Package for Vista available!!!
This driver package installs a range of important utilities and contains this apclations:

TOSHIBA Rotation Utility: Set the default screen orientation you want the system to use when switching from PC to Tablet mode, or vice-versa.

TOSHIBA Tablet PC Buttons Driver: You can dedicate tablet buttons to performing common tasks so that you can easily operate your tablet computer when you're away from your workstation. For example, you can dedicate a button to open a program or to change your screen orientation.

TOSHIBA Accelerometer Utilities: These Utilities are a set of hardware utilities that work with the motion sensors built into you machine. With the Accelerometer, your machine will be able to detect the way you are holding it at any given moment. You can set the machine to perform a specific function when the unit is quickly tilted to the left or right, or to the front or back. You can also take control of the cursor in some applications and make it move by leaning the PC in a certain direction

1 more replies
Relevance 79.54%

Hi Guys.. I seek your help.

I have downloaded all the new Vista related drivers avaiable from Toshiba to support the new install of Vista Business on my old Portege M400, which came preloaded with XP Tablet version and kept them ready on a CD.

I have also upgraded the ACPI BIOS version to the latest available 3.80.

I insert the first CD of Vista Business and do a boot. ( I also have a n upgrade Vista Business CD but I want to do a clean install).
I go past initial steps and choose Install.
I am confronted with an error message " No drives were found. Click load driver to provide a mass storage device for installation"

Seems like Vista is not able to see the onboard IDE Hard Disk and it's a driver issue.

I hit the 'Rescan' button available on the Install windows and another message pops up: " No Device drivers were found. Make sure the installation media contains the correct drivers and then Click OK!!"

On the currently loaded XP: The Device Manager shows the currently loaded IDE ATA/ATAPI Controllers as: " Intel (R) 82801G (ICH7 Family) Ultra ATA Storage Controllers and Primary IDE Channel.

Disk Drives shown are: Toshiba RAID LD0 SCSI Disk Device

Pls advise, as to which new drivers from the available downloads of Vista drivers for my ML 400 Model PPM40E, should I choose here so that my Vista install recognises the available hard disk?

Answer:Cannot install Vista Business on Portege M400 - IDE issues

Hi

It?s very easy to solve this issue.
If you would look on the Toshiba European driver page (Portege M400 section), then you would notice that an RAID driver is available for this notebook model.

The Vista cannot be installed because it cannot find the HDD due to missing RAID driver!

You have to install firstly the RAID driver and then you could follow with the Vista Setup.
As far as I know the Vista setup accept the USB flash stick so you could use such stick in order to include the RAID driver.

Hope I could provide some useful hints?.

Cheers mate

2 more replies
Relevance 79.54%

Hi.

I have just installed a new hard disk and VISTA (Missing the Toshiba HDD Recovery section - Still do not know how to create)

Anyway I have managed to successfully install VISTA. (Trick was to install the Raid Divers in the installation process)

BIOS UPDATE
Current BIOS 1.6

I would like to update my BIOS to version 3.80 (Latest)
I have down loaded the BIOS 3.80 files BUT it will not load.

1. I do not have a FDD :(

2. I tried burinng a CD-ROM from the ISO) Bot I could not get it to boot from the CD-ROM (I only have a Toshiba Extenal CD Rom Drive and not sure if it can boot from CD)

3. I tried to run the Launcher and install via Windows BUT received an error message "NOT SUPPORTED ON THIS COMPUTER"

I think the Launcher can only run under XP not vista.

Is there any steps I am missing... Do I need to do an incremental BIOS update and how do I install without a FDD or Bootable CD-Rom Drive?

Answer:Portege M400 - Bios 3.8 Upgrade installation (Vista)

> 1. I do not have a FDD
You don?t need a FDD because the Toshiba BIOS is win-based BIOS and not traditional BIOS and this would mean that you have to execute the BIOS update while OS is running.

> . I tried burning a CD-ROM from the ISO) But I could not get it to boot from the CD-ROM (I only have a Toshiba External CD Rom Drive and not sure if it can boot from CD)
As mentioned above this BIOS update can be executed ONLY while OS is running! It?s win-based BIOS!!

> 3. I tried to run the Launcher and install via Windows BUT received an error message "NOT SUPPORTED ON THIS COMPUTER"
Either you have chosen a BIOS update which does not support this notebook or you have to run this update using the Toshiba preinstalled Windows OS.

> Do I need to do an incremental BIOS update and how do I install without a FDD or Bootable CD-Rom Drive?
Not possible -> see point 1 and 2

4 more replies
Relevance 79.54%

Hi,

I have a toshiba portege m400.
It has windows xp proffessional SP3 installed (the previous owner replaced it with this from the xp tablet edition - i want to upgrade to vista so i can have the tablet abilities back!)

Anyway, I've got a version of vista - a home premium upgrade version.
When i try installing it it comes up with the error:

+'This computer is not compliant with the Advanced Configuration and Power Interface (ACPI) standard. Windows must be installed onto a computer that supports ACPI. Contact your computer manufacturer for a BIOS update or install Windows on an ACPI-compliant computer.'+

When i try and boot from the cd it gets up to when i type in the product key, but then it tells me i should run this from my current operating system.

I've tried to update the BIOS (it's currently 1.8 and I've heard vista needs 2.0 at least). I tried to install the latest driver from the Toshiba website - BIOS version 3.2.8 but it tells me 'this computer is not supported' even though i went through the procedure of choosing my laptop's kind and spec and the driver came up on it's list.
Now i'm pulling my hair out.

Can someone please help me!
Would getting a full version of vista work (not an upgrade version) and boot it from the cd since it seemed to get further that way?

Thanks!

Answer:Cannot install Vista on Portege M400 - Not compliant with ACPI

Hi I have a similar problem. I can not install the latest BIOS update.

I did manage to install Windows VISTA Home Edition Premium. (Fresh Install not upgrade)

I needed to also install a few updates. HOWVER I have noticed that my Power manager is not running and the battery is causing problems. I think this may be related but I need to be more research.

6 more replies
Relevance 79.54%

Hi

I've upgraded my M400 to Vista.

Now I'm installing all the Tosh Vista drivers. According to the instructions, the first thing to do is to update the bios.

So, I download the bios (v3.60) from the site and run the .exe, but it tells me I need the common modules.

The only common modules I can find on the Tosh site are for XP.

Can anyone help?

Thanks

Steve

Answer:Portege M400: Cannot update the BIOS after Vista installation

Probably you have to update the BIOS before you will install the Vista on the notebook.
Then you could install the Vista again.

3 more replies
Relevance 79.54%

Hi,

I've come to the decision of installing vista on my M400. I upgraded my BIOS to 3.40. However, I really want the silent fan so I was wondering if it was possible to run Vista under BIOS v1.80 and if so, if it would impact performance in anyway.

Answer:Portege M400 - Vista installation under 1.80 BIOS version

As far as I know Portege M400 (PPM40) is Vista supported but I really do not know what will happen with cooling fan and noises. Test it simply. If you do not like Vista you can install recovery image anytime again.

3 more replies
Relevance 79.54%

I have upgraded an M400 which came with XP to Vista Business. Launching the Toshiba Recovery Disk utility delivers a message "not HDD partition found". The management console shows a recovery partition - though it probably still has the XP recovery info.

Anybody got ideas on how to transfer in a Vista recovery image into this partition? Is this available from Toshiba somewhere in the world? I can get my tech support people to chase it if we know it exists....
Cheers

From Australia

Answer:Creating Vista Recovery disk on Portege M400

Hi,

maybe you should properly format the drive and remove ALL partitions with an external program (like UBCD -> "Ultimate Boot CD") and then try it again.

It can be that the XP recovery partition is blocking the new recovery/installation process.

If I were you I would try this format-thingy.

Otherwise grab another HDD and try it with this. ;)

Cheers

2 more replies
Relevance 79.54%

Hi!

I have owned a Portege M400 for a 3-4 months now, and I'm just wondering if there's even one single person out there who has succeeded to get this laptop work under vista 64bit.

I finally got bluetooth drivers to work, after drivers came avaiable. But the next list doesn't work or I havent found drivers that work.

-Buttons under the LCD screen
-Accelometer (and all the utilites like rotating display or doing something while tilting machine)
-HDD protection utility ( I installed Vista drivers, but they totally destroyed the machine and I had to restore system. windows didn't start after installation)
-Fingerprint reader

And I could live if I just could get buttons and accelometer to work, but still it would be great that the whole laptop would work.

I am starting to lose hope and I am already considering to install pirate Vista 32bit into that laptop... Because it seems that It was a mistake to buy 64bit ultimate. some Toshibas drivers state they are "vista" drivers but they still don't work with 64bit version, that's bit frustating...

Anyway if anyone could help me I would appreciate it a lot! Because i'm slowly getting frustated with this issue with 64bit vista.

Thanks in advance

Answer:Portege M400: Where to find Windows Vista 64bit

I really understand you but there is nothing to do!!!!! The Toshiba 64bit Vista drivers are not available on the Toshiba page. Nothing!!!

Of course you can use an Vista 64bit on the notebooks but you will not get any 64bit drivers. Maybe later but not at this time!!!

So either you will switch again to 32bit Vista or you have to use this notebook without the 64bit drivers. But this is not recommended?

Greetings

2 more replies
Relevance 78.72%

Notebook M400-170 with Vista OS and latest Toshiba downloads.

If you open the Toshiba specific property sheet of the Vista power manager (Tree entry =>"TOSHIBA Power Settings V8.02.00") you will see a property called ""Cooling method" - very interesting.

But, what is the difference between the two values "Battery optimized" and "Cooling optimzed" ?

After some tests, interest decrease because regardless of the value of that parameter, even after a sufficient time for stabilization, *the FAN behaviour remains unchanged : it blows useless and extracts only cold air ...*

Answer:Portege M400 - Vista specific power managment V8.02.00 parameters

Hm, did you installed the latest BIOS? Maybe the powersaver software needs the latest version, I guess.

Another thing would be to close some programs which run in the background and throttle some functions (e.g. graphical stuff) down to see if it stops blowing.

Can you please give a short feedback? Would appreciate it.

Cheers

3 more replies
Relevance 78.72%

Toshiba Flash Cards crashes on Vista when windows is set to use the "windows standard" colour scheme under appearance settings, (for your information, I prefer to use this mode as vista runs quicker, uses less battery power and less system ram in this mode).

However it does not crash immediately, instead it seems to crash whenever I rotate the screen (which happens quite often as I?m using a tablet pc) with the previous version of the software it crashed on boot however that seems to have been rectified with this version although not completely, however when it crashes it will not fully close even if i force task manager to end the process (rather than just the task).

(Portege M400 - vista home premium - tosh flash cards v.2.00.02)

Many thanks - Garthark

Answer:Portege M400 - Toshiba Flash Cards crashes on Vista

Hello

It is very interesting issue. Have you noticed the same using standard Vista colour scheme?

8 more replies
Relevance 78.72%

Hi All

I've upgraded from XP to Vista on my M400 and want to get Ulead Movie Factory going. The only download I can see is for a patch but I don't have the original anymore. Does anyone know where I can download the original from?

Thanks

Steve

Answer:Where to download Ulead Movie Factory for Portege M400 & Vista

Did you find the Ulead Movie Factory software on the preinstalled Toshiba image?

If yes then I assume this program was bundled with the notebook and cannot be installed separately.
Either you will use the Toshiba recovery CD and would reinstall the notebook to use this program or you will buy a full version.

Best regards

2 more replies
Relevance 78.72%

Hi,
I have installed Vista Ultimate on a brand new Portege M400.
The mouse cursor doesn't stop flickering.

It changes briefly about 2 times a second form the usual arrow to the "blue circle" indicating a context change.
Any idea why and how I could solve this "feature" ?

Thanks in advance

Answer:Vista on Portege M400: mouse doesn't stop flickering

To be honest, I have no idea why your cursor flickers.
But one is sure? this notebook was delivered with Win XP and I presume the mouse worked properly on installed XP. Am I right?

Well, in such case it must be something wrong with the software.
Maybe you have installed the whole Toshiba drivers in the wrong order or some drivers are missing. Maybe the graphic driver must be updated. Who knows ?:|
Such issues are uncommon and it?s necessary to investigate!

Please install all drivers like mentioned in the Toshiba installation instruction txt file which can be found on the driver page.
Then update the Vista to the latest state!!!

3 more replies
Relevance 77.9%

I have spent several hours working through the Vista Upgrade only. Upon a reboot as part of the process I now get a BSOD reporting a page fault error. Microsofts advice was to back out the upgrade and try again. Helpfully (or not) this has resulted in the same scenario second time around. The office is now closed for the weekend, presumably because no-one gets issues late Friday/over the weekend?!

There is a Kb on support.microsoft.com (kb 939720) which alludes to a similar problem and a hotfix, but you can't download it - you have to phone them. Have any other Portege users had the same issue and how have they resolved them?

Regards

Chris

Answer:Portege M400 : Upgrade from XP to Vista causes page fault in non paged area

Hi,

just a little question: did you already installed the Vista compatible BIOS on your machine?? It?s one of the most important steps before installing the "wonderful" Vista on your harddisk (I cannot understand why you need it but OK it?s your machine... ;) )

If not already did, go to the Toshiba Driver Download site and download the latest BIOS for machine (Vista compatible) which is absolutely essential if you decided to put Windows Vista on your machine.

Here?s the link:

http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

Would appreciate any feedback from you regarding your situation.

Greetings

4 more replies
Relevance 77.9%

Hi All,

I have a 24" Wide screen monitor connected via the docking station on my M400. My question is, is it possible to also use the internal LCD and it's tablet functionality when using my 24" monitor.

The 24" display is fine but the internal LCD display is rotated 90 degrees giving a black border top and bottom (portrait way up) but the digitizer is working in landscape mode. So if I move the pen down it moves to the right on the screen :)

It is so close to being right I hope that this can be achieved. It would be great to work off of the 24" monitor and to have the Windows Journal open for writing notes on the tablet screen.

Thanks,
Royce

Answer:Portege M400 - Vista - External Monitor + internal tablet functionality

Hi

Hmmm? if you want to change the screen orientation I would suggest to checking the Toshiba Tablet options.
There you should find the Tool called ?Rotation Utility?.

This Utility provides some option to change the screen orientation in the PC mode and in the Tablet mode.
When the notebook was set to Tablet mode you can choose between Primary portrait, primary landscape, secondary landscape and secondary portrait.

Check it simply

5 more replies
Relevance 77.9%

Since installing vista the Advanced Instant Security does not work, HD accelerometer works fine. Has anybody any suggestions?
Done the usual re-install

Answer:Portege M400: Since installing Vista the Advanced Instant Security does not work

Hi

Have you installed all listed Vista tools & utilities from Toshiba download page?
I hope you have used ?Installations Instructions? document to install all stuff in the right installations order.

Is ?Security Assist? installed on your Portege notebook?

5 more replies
Relevance 67.24%

I know this is a common problem but it doesn't seem solveable on my Toshiba M400.

I have upgraded to 4GB RAM (2x2GB) and am running a 64-bit OS, yet the OS can only see ~3.3GB of the 4GB installed. The BIOS shows 4G. I understand some machines have a BIOS option to enable the OS to use all 4GB. Am I missing something, this feature doesn't seem to be available in the M400 BUIS.

Answer:Portege M400 can't see more than ~3G

Which 64bit OS? If its Vista, try Service Pack 1.

Also update the BIOS to the latest version.

http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

7 more replies
Relevance 66.42%

I can't change the color or lineweight of a layer using the dialog box. You can select a new color/lineweight, but the change is not executed. It works on my desktop computer. I think this is a video driver problem. Does anyone have a fix?

Answer:Portege M400 and Autocad2007

Hi

Well, it seems that this is a newest version of this AutoCAD application.
Maybe it?s only a setting issue. I?m not a AutoCad expert but check the Toshiba driver page and compare the display driver versions.

I would also recommend asking the AutoCad manufacture support.

Ps. Check also this page:
http://www.jtbworld.com/autocad2007.htm

5 more replies
Relevance 66.42%

I've been actively using my Portege M400 for almost 2 years. Few months
ago it has started becoming less and less easier to start up the
laptop. When I turn it on, the following happens:
* The screen remains black and doesn't display anything
* The power LED either blinks yellow or lights green
* The HDD LED blinks just one time for a 1/10 second and remains off, or doesn't light up at all
* Sometimes the fan starts working quite actively and loudly
The only thing I can do with it is to turn the laptop off and try
again. Sometimes it starts up after the first attempt, but sometimes I
have to try up to 10 times.
Here is a video showing the behaviour described above:
[http://www.youtube.com/watch?v=RjNa8-c2Aro]

Any ideas what is this all about? Perhaps, I should cleap up the laptop inside, particularly the fan?

Answer:Portege M400 hardly starting up

It is not easy to say for sure what is wrong there but please try to do follow:
Disconnect all external devices connected to your notebook, remove the battery and try to switch it on with AC power supply only.

Please post the result.

3 more replies
Relevance 66.42%

Hallo,
is it possible to install Win 7 on the Portege M400? There is Windows XP on the Notebook.

I am German, excuse please my bad English.

Many greetings
Lobbie

Answer:Windows 7 on Portege M400

Theoretically yes but question is: is this notebook model supported for Win7?
Have you checked drivers archive?

You can do this under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

Fact is that many Vista drivers can be used with Win7 so you can try to install Vista drivers.

6 more replies
Relevance 66.42%

I have a Portege M400 running XP SP2, and during normal use the temperature usually lies between 55 and 65 degrees celcius. At load the temperature is consistently above 60 degrees, between 60 and 75 degrees celsius.
I wondered if this is a normal temperature range - or perhaps I have been so unlucky as to have gotten a defective CPU.

Jonas

Answer:Portege M400 - Temperature?

Hello

I am pretty sure you know that CPU temperature depends on CPU usage and also of notebook position (on the desk or on the knees) and how the unit can be cooled down.

In my opinion there is no reason to be worried. Now while typing this message and listening online radio (without much activity) CPU temperature is 63 degrees Celsius.

Anyway I recommend you to update BIOS on your unit. I don?t know if you have saw info about new BIOS update for M400 under http://support.toshiba-tro.de/kb0/TSB6A01KJ0000R01.htm

1 more replies
Relevance 66.42%

Running Ubuntu Linux on the M400 and it seems almost all BIOS versions prior 3.60 are broken because there are APIC quirk errors on the CPU. Maybe Microsoft could work around the broken APIC tables for a while but with Linux things are a bit cumbersome. Microsoft asked Toshiba for a BIOS update to deal with these issues and starting from 3.50 it seems to be fixed.

see here

Even in Linux no more APIC errors are seen. :-) But after updating to 3.60 BIOS the boot screen stays active and is preventing me to select an option for a multi boot entry (grub). When the OS is already starting the boot screen turns white at first and then gives finally control to the OS. Are others seeing this as well?

I am able to select something in my boot menu but it's more guessing because the boot screen is still on top. Very annoying this :-(

Another issue I have is that sometimes the system freezes for a couple of seconds and then goes on, nothing to be seen in logs when using Ubuntu or WXP tablet. So could be a bug in BIOS once again. Again looking for confirmation, are other experiencing this as well.

Did reflash 3.60 a couple of times but seeing this behaviour over and over again.

Although there seems to be some fan control in 3.60. It doesn't fire like a DC9 but still not as silent as the 1.80W or 2.10N BIOS versions were. Love to see these fan noise changes incorporated in 3.60 and later?

Answer:Portege M400 and 3.60 BIOS

Hi Robert

I know you will hate me but the fact is that Portege M400 has sticker near the keyboard and there is written something like ?Designed for Microsoft ??. With short words: Linux OS is not supported.

If you need some help with Linux on Toshiba notebooks please check http://newsletter.toshiba-tro.de/main/index.html

Issue about freezing is very strange and if you want to check it properly install recovery image without any additional software. In this case you will have ?factory settings? and clean preinstalled OS. If you will notice some exceptional issues you should contact authorized service partner and clarify this.

Good luck!

1 more replies
Relevance 66.42%

Hi there, Speedfan has been reporting that at peaks, my laptop goes to 100*C, idles at about 60 and is usually at 75-88*C. Most online fan cleaning guides make the process look relatively straight forward - the fan pops right out like the battery or hard drive. On my M400 though it doesn't look so easy. Can anybody advise me how to access it to clean? Thanks.

Message was edited by: korobeiniki

Answer:How to clean the fan on Portg M400?

Are you sure that the temperature that you are getting is right? 100 seems too hot. I would look under the keyboard for the fan.

2 more replies
Relevance 66.42%

Hi,
I am looking to upgrade my portege m400-ez5031 with the fastest cpu it can handle,
now it is centrino duo T5600 1,83ghz.
I think the best is T7600 is it possible?

Answer:Re: Portege M400 cpu upgrade?

hi,

I don't know your motherboard's specification if it can handle T7600, but I think you should read:

http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

6 more replies
Relevance 66.42%

I was excited to receive my new toshiba portege m400 today, but the fan noise is quite bad.
The problem is that it always runs 100% -- I tried the Toshiba power save properties to
set the fan speed but to no avail, it has no effect at all. Furthermore, I tried to set
all three bios power options (low,full power,user) but that has no effect either.
Worst of all, the cpu temperature is very cool, just 29 degrees, and there is no need
at all to run the fan at full speed. I guess the power save utilities are bugged and I wonder
if Toshiba will come out with a new version of their tools? Is there anything I can do?


Thanks,
-- Daan.

ps. bios version 1.30, toshiba power save tools 7.08.00. Cpu speed is dynamic, usually at 1 ghz and
the temprature is very low.



[Edited by: admin on 20-Apr-06 06:48]

Answer:Portege M400 - always running fan at 100%

Hello,

does this appear since you bought the Notebook? Are there any processe's listet in the Task Manager which have a high CPU usage? To except all Software issue's, i would recommend to do a Recovery with the delivered Recovery CD/DVD.

If this appear since you bought the Notebook, i would contact the local service partner and ask him for a answer. This should not be normal.

br, rYan

15 more replies
Relevance 66.42%

I recenlty purchased a Portege M400 and this completely freezes and requires a hard reboot at least once a day - any ideas on how to fix this?

Answer:Portege M400 keeps freezing

Hi

Do you use the Toshiba preinstalled image or did you install the OS manually?
Do you use any 3rd party software?

I don't know if it helps but sometimes a high temperature could be responsible for the notebook freezing.
In most cases the cooling modules cannot work properly because of bad air circulation.
Please be sure that you have enough space around the notebook and the fans are clean.

Furthermore you could check the Power saver settings which allow you to change the CPU processing speed and cooling method.

If it doesn't help so I would recommend asking the Toshiba service partner for the further help and diagnostic.
I assume the Portege M400 is a new unit and the warranty should be valid.

4 more replies
Relevance 66.42%

Hi there,
I have a regular portege M400, and I want to display on a tv. I have bought a simple vga to svideo cable on ebay... what am I missing? The video card seams to be able to do that option...

and clues...
thanks

Answer:Display Portege M400 on TV?

Hi,

normally you only have to switch to the external device with Fn+F5.

Bye

2 more replies
Relevance 66.42%

Hi,

I am having problems calibrating my tablet pen.
A few weeks ago my pc was sent to Toshiba to have some work on the screen. I do not know if it was cleaned or replaced. Since then I have been unable to calibrate my pen in either landscape or portrait.
The pen works perfectly well at other times, but when the calibration screen appears I can't "click" in the spots. I can click the cancel button and I can right click too during calibration but not normal "click".
Although not a huge problem I would like to adjust the calibration slightly.
Anyone any ideas?

Many thanks,

Ian

Answer:Portege M400 Pen Calibration

Maybe it?s only a problem with the distance between the stylus and the screen.
But of course we shouldn?t exclude the fact that the ASP has worked on this notebook and maybe the technicians have forgotten something.

For example; if the system board was replaced on a notebook with accelerometer sensor it?s necessary to recalibrate this accelerometer with the Test & Diagnostics Software.
For example if the sensor is not calibrated the correct switching between landscape and portrait mode will not work.

Maybe a similar issue could be responsible for the pen calibration problems.
So I think it would be a good idea to contact the ASP again and ask for some details and what was changed on the notebook.

2 more replies
Relevance 66.42%

Hi to everybody :)

I have a Portege M400 with a T2300 and I would like to know If is possible to make a cpu's upgrade
If yes, which cpu are compatible and with which version of bios?

Thanks in advance

Answer:Portege M400: Is it possible to upgrade CPU

Hi

Usually the CPU upgrade or replacement on the notebooks is not possible or very difficult and risky. It could be possible that the notebook will not boot or will not run stable after the CPU upgrade. The overheating could be one of the biggest problems!!!

So I really not recommend upgrading the CPU!!! It?s not worth to risk the damage only to get a tiny CPU performance increase.

But if you want to know what CPU are supported by the chipset? so here is the list ;)

The M400 computer is equipped with an Intel Core Duo Processor or Intel Core Solo Processor. These processors incorporate a math co-processor, a 2MB L2 cache memory.

The M400 comes in with one of the following speeds:

_Intel Core Duo Processor_
- 1.66GHz (Processor Number : T2300)
- 1.83GHz (Processor Number : T2400)
- 2.00GHz (Processor Number : T2500)
- 2.16GHz (Processor Number : T2600)

_Intel Core Solo Processor_
- 1.66GHz (Processor Number : T1300)

Hope I could helps!

Regards and cheers buddy :)

1 more replies
Relevance 66.42%

Hello all,

im having heat problems with my second hand M400. Now the previous owner told me Toshiba changed the mainboard once.

Since the temps are high and the fan runs almost all the time even when theres no cpu usage and its throttled down im thinking the might have made a mistake at toshibas while reassembling the unit. Maybe they forgot the thermal grease or dindn't screw down the heatsink properly or therelike. And the fan dosent sound very healthy compared to my other, older M400.

Has any of you ever disassembled an M400? How do you get to the heatsink, from top or bottom of the unit? any fragile or tricky parts i should look out for? Is there a even a How-to with pictures out there in the depths of the internet? :D

I've built and repaired a lot of desktops, so im quite computer savvy, but on laptops i've only changed RAM so far. so im really greatful for all your tips.

thank you

Answer:Portege M400 - How can I disassemble it?

Hi!

I think the best way is you contact the ASP again.

Disassembling a notebook is a little bit tricky. You must remove a lot of screws and parts and so this should only be done from a notebook technician.

Maybe you can find a workaround by using Google but a notebook technician can help you more.

Bye

5 more replies
Relevance 66.01%

Hi there,
When I look for an update to the BIOS in my M400 at the Nordics version of Toshibas homepage http://nordic.computers.toshiba-europe.com - here is what I find;
On the nordics toshiba website they have the 1.50 version available for download, while the US version website I can download the newer 1.60 version. As my M400 is a Danish version I am a little unsure as to if it's ok to update my BIOS to v1.60 now that the nordics toshiba website don't have that BIOS version available.

Any thoughts and views about going ahead and installing the version 1.60 on my DK-version M400 is very welcomed.

Cheers

Answer:Portege M400 - BIOS update to 1.60

Hi

Please don?t compare European and US notebooks models and don?t make update mix. If you have European notebook please use just the stuff available on Toshiba Europe download page.

If you don?t have problems with your unit and if operating system runs stabile, don?t do anything. It is just my advice.

Have a nice day!

3 more replies
Relevance 66.01%

I am trying to restore an old Toshiba Portege M400. I have WIN XP Tablet 2005 installed and what I think are all the drivers. Everything works great except the touchscreen.

I have been all over the web, downloaded and installed some WACOM drivers aswas suggested in another thread here - still no luck.

Anybody have any ideas or experience about how to fix this?

Answer:Touchscreen is not working on old Portege M400

Unfortunately I don?t have this Portege and cannot help you with this but what you can do is to check Installations Instructions document and check if you have installed all stuff listed there.

Check it out and post some feedback.

7 more replies
Relevance 66.01%

I have exactly the same problem with a Portege M400.

After an hour or 2 the the fan becomes extremely noisy and the PC freezes. The base of the PC becomes too hot to touch and in fact the Tochiba/Microsoft and barcode stickers on the base have turned brown due to the heat.

The only way to fix the problem seems to be to turn the PC off for 15 minutes of so and reboot.
When this happens I am usually only running outlook, Norton and a browser!!!

This hs been happening for about 6 months. I've cleaned out the fan but this has made no difference - anyone know a fix?

Answer:Portege M400 freezes due to overheating

Hi

If you have cleaned the cooling modules and if this didn?t help, then you should get in contact with an local ASP technicians.
Possibly the notebook must be disassembled completely and should be cleaned inside.
This is very tricky procedure! Furthermore the thermal grease which I placed between the CPU and the cooling modules should be renewed.
After a long time of usage, thermal grease becomes dry and cannot channel the warmness created by CPU.

Last but not lease you should use your notebook always on a table. Do use it in bed or lying on the knees. In such case the cooling ventilator would not get enough air and this leads to a higher temperature.

1 more replies
Relevance 66.01%

I installed windows 7 Ultimate version on my Portege M400. all works except the sound.

There is a error in device manager under other devices - Unknown device - details hardware Ids--> ACPI\TOS620A. not sure if this has anything to do with the sound.

Please help.

Thanks
Mani

Answer:Portege M400 - No sound on Windows 7

Hi

I have founded a similar thread regarding this no sound problem and the unknown device TOS620A. Check this:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=182958

But I can say that TOS620A has nothing to do with the sound. I think it has something to do with Bluetooth or HDD protection?

1 more replies
Relevance 66.01%

I recently bought a Portege M400 via a popular auction site, and all is fine except that the battery doesn't charge. The LED does not light and the machine is therefore not portable!
I bought a replacement battery but that doesn't work either.
It's clearly the laptop that has the problem, is there a simple fix?

It must have been okay once!
Thanks for any help.

Answer:Portege M400 - batteries don't charge

In my opinion there is no simple fix because the battery charging is managed by board electronic (power supply electronic) and I am afraid you need professional help.

7 more replies
Relevance 66.01%

My function keys on my laptop are suddenly not responding.
I've never had a problem with them prior to this, but I'm not sure how to fix them at this point.

When I hit the function key by itself, the green light beneath F11 still responds, but that's really the extent of the activity.
I've had the laptop for almost a year, and I'm running an XP OS.

Any comments or suggestions are much appreciated.

Thank you!

Answer:Portege M400 Fn Keys not responding

Hi

It would be interesting to know what OS you use.

But if you use the XP then I would recommend reinstalling the Common Modules.
This application can be found on the European driver page.

Bye

3 more replies
Relevance 66.01%

I have portege m400-103 from end of 2006 year.

Some months ago I found a trouble - if I reboot the noutbook, then after detecting hardware and after enter the password nout switch off the power and starting again in cycle. Power reset happend before OS booting.

After removing hdd, power on, power off, installing hdd again and power on in 50% all booting normally.
I see the SMART on hdd and bad blocks - all normally.

And yet another thing - if nout not to reboot the nout - all working fine some weeks without any problems. I close the cover and note going to sleep and waik up then absolutly fine in some weeks.

What can i do with it?

Answer:Portege M400-103 going to unstoppable reboot

Hi

It?s a little bit hard to understand the posting but it seems that the notebook does not boot correctly ? sometimes.

>I see the SMART on hdd and bad blocks
SMART monitors the HDD and provides details if something would be wrong with the HDD
Maybe the issue is related to the HDD?
This could be possible?

Therefore I would recommend checking the HDD. Maybe the notebook would functions using a new HDD?

2 more replies
Relevance 66.01%

I've tried Paragon Partition manager (bootCD).
But, when I loaded from CD, Partition manager does not see hard drive of my Portege M400
Is there special drivers or software for doing this task?

Answer:How to resize partition on Portege M400?

Do you use the Vista or XP OS??

If you use Vista OS you can change the partition size n the ?disk management?
Just simply shrink the existing partition and then create a new one on the free space or simply add the free space to another partition.

If you use the XP I would recommend using the tool called Partitions Magic 8.
http://www.softpedia.com/get/System/Hard-Disk-Utils/Partition-Magic.shtml

It?s a wonder full tool which supports many useful functions!!!

3 more replies
Relevance 66.01%

Hi everybody!

I have had this Portege M400 for almost 2.5 years and never encountered such problem.

When I press Power button *HDD led light turns on, then WiFi and then suddenly HDD goes off* and stays that way :(. Optionally, Toshiba logo displays in the mean time. I thought that was HDD problem just to find out that after tilting my laptop 90 degrees HDD led started flashing again. Eventually, when Windows loading animation started it would be "safe" to return to normal position and Windows would start.

Sooo, I assume that the problem is somehow connected to accelerometer, is it? I don't get such freeze-ups after Windows boots. Currently I have BIOS 3.8 version and Windows 7 Pro installed ...

This thing really starts to annoy me - people watch me strangely as I tilt my laptop 90 degrees :-)

Any advice would be greatly appreciated!

Thanks in advance!

Best regards,
Jovan

Answer:Portege M400 boot problem

Hi

Maybe this has something to do with the notebooks HDD?
Maybe the HDD head cannot move properly and the vertical position helps to get the HDD head moving again?
Unfortunately, I have never seen such strange notebook behavior and therefore I can provide just some personal suggestions?.
In my opinion the HDD should be checked at first? maybe the issue could be solved by HDD replacement?

Greets

5 more replies
Relevance 66.01%

Hi there,

Last year I've bought the M400 with XP Tablet on it, but though I give my notebook proper maintenance it's become so slow, that only a clean install will work.
So I put the recovery CD in the drive, boot from the cd, choose whatever language (all languages give same error), and want to start the recovery, but then it says that my harddrive is inaccessable/can't find it.

But when I reboot (off the hdd), everything works fine (except it's very slow). I've checked the hdd for errors using HD-tune, no errors. I've deleted all the passwords and fingerprint passwords etc. but nothing seem to help..

Does anyone know how what to do next?

Answer:Re: Portege M400 - Cannot recover - HDD is inaccessable

Hi

Did you try to reinstall the OS from Toshiba recovery CD???

Prot?g? M400 supports the RAID.
The RAID needs the RAID driver and without the RAID driver the HDD is not visible for OS setup.

So if you use a clean Windows installation the RAID driver must be included firstly.

Please check also the user manual -> RAID

8 more replies
Relevance 66.01%

I have an M400 with Vista SP1 installed. Occasionally and seemingly at random the display will become totally corrupted, flickering madly. This has been a 'feature' since before SP1. We have this on more than one individual PC so we're guessing software rather than hardware.

Usually 'sleeping' the PC and waking it back up cures this but it's incredibly frustrating. Has anyone come across this or better still cured it. We think we have latest graphics card drivers but would be willing to try newer ones if known.

THANKS!

Answer:Portege M400 - flickering display

Hi

If this issue appears on different computers then it?s definitely a software issue!

Do you have an Intel graphic card? If yes, then remove the installed Intel driver and choose the one from the Toshiba European driver page!

If it doesn?t help then it could be worth to try a graphic driver from the Intel page!

By the way; The Vista SP1 is not supported fully by all drivers. Therefore it?s possible that a SP1 affects the graphic driver and the performance.

Cheers

1 more replies
Relevance 66.01%

Hi everyone,

I try everything, what I can and can't. During Windows XP Installation can't detect any HDD.

PORTEGE M400 PPM40E-0DG0253I
BIOS 3.8

Vista installation work properly with given RAID drivers, but XP installation won't work for all that. I try a lot of drivers (different versions even for Vista), with nLite integration, with SD-start 16-bit Dos, DriverPacks. I bought USB-Floppy - no change, the laptop don't see HDD. I try with external USB-SATA Case, but this without success too, but I can see HDD

Any ideas?

Answer:Portege M400 - XP installation can't detect any HDD

Somehow you are missing SATA driver.
Very good description how to prepare installations CD you can find HERE .

This Toshiba document could be useful for you:
http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm

If you have more questions please let us know.

Good luck!

5 more replies
Relevance 66.01%

I have a Toshiba Portege M400 PPM40E, I was able to install Windows XP on the computer.
I can not have access to my wired network.
The wireless works well.

What is the driver.
On one speaks of network documentation Gigabyte Intel 10/100

Answer:Need Win XP LAN network driver for my Portege M400

you can find LAN driver on Toshiba download page -
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
Very important is that you search your old Portege model in archive, so under ?Product type? choose option ?Archive?.
I?ve checked it and version 9.2.24 is ready for download.
Can you find it?

1 more replies
Relevance 66.01%

Hi to all,

is there a way to use a *SSD disk* in a Portege *M400* ?

Will be there a BIOS upgrade to support this feature?

I buyed a SSD 32Gb but seems not work!

Thank you in advance,
3point

Answer:SSD disk support on Portege M400

Hello

I am afraid nobody here can you give answer to this. This is user-to-user forum and nobody here can say for sure what will happen in the future. If you want to pick up info from good source contact nearest authorized service provider.

Maybe they have access to such info.

5 more replies
Relevance 66.01%

Hi..

I want to installed the toshiba driver package valued add (power meter tool etc) in my Win7.
But if i try to install it the setup routine says, that i havent a Toshiba Notebook or my Bios is to low for that.
I have Bios Version 3.80 and i doesnt find any newer Bios version for the M400


any ideas about the error message?

regards

Answer:Portege M400 and the Toshiba valued add

I can just imagine your old Portege m400 is not Win7 supported.
Where you downloaded VAP for your notebook model when M400 is not on the list for Win7 drivers?

3 more replies
Relevance 66.01%

I have problem with VT. In BIOS VT is enabled, but Windows 7 can't see it. I instaled XPmode but when i try start it I get comunicate that virtualisation is disable. I dont know what i mus do.

Answer:Portege M400 problem with Virtualisation

Hi

What CPU you have in your Portege M400?

Virtualization is depending on the mainboard (BIOS) *and* type of CPU. The point is that not all CPUs are supporting Virtualization and so you should check the specification on the Intel page first.

Check this!!!

3 more replies
Relevance 66.01%

Hi i have a Toshiba Portege M400 Model No. PPM41E-00H01CHK

I re-installed OS (Window Xp Tablet) from the recovery disk as it was running slow.

It has been hanging at the Toshiba Boot screen, showing Built in HDD Error and failing to boot.

When disconnecting the power and hdd and then re-connecting it occasionally booted but if shut down would fail to boot again so i figured the hdd was failing and bought a new one.

Now I can not install xp onto the new hdd. I am getting Built in HDD Error, this time however it goes past this message and will boot from the recovery cd to the install screen.

It then fails to install and gives a message about a faulty disk or bad RAID Configuration.

I have since found out that this is something to do with the portege m400 having a SATA HDD which is not supported by Xp natively and needing to install raid drivers beforehand.

I have read that the recovery disk should be able to boot to a new disk directly and do the configuration but i can't seem to get it working.
How can i install the OS onto the new hdd?

Thanks in advanced

Oli28

Answer:Portege m400 New HDD Install problem

Reference: Product manual, http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/outFrm.jsp?ofId=AskIris&searchString=Toshiba+Portege+M400+Model+No.+PPM41E-00H01CHK&x=5&y=8 .

If you are using recovery disks that do not need a recovery partition...then you should be able to install with no problem.

If your tablet also contained a recovery/restore partition that had to be used with the recovery disks...it would seem that is your problem.

If you are using recovery/restore disks provided by Toshiba...any/all drivers needed for recovery/restore would be included in the recovery/restore process.

Louis

10 more replies
Relevance 66.01%

Hi, gotta problem, I'm trying to install Windows 7 on my M400, but it don't see hard drive.
The hard drive is surly ok, 'couse I've tested it in the other netbook, I can see it in BIOS, but any installing program cannot.

(I've tried XP Tablet ed., and Ubuntu as well)

Answer:Portege M400 - Windows 7 doesn't see the HDD

Hi Radzik,

I think Windows doesn?t see the HDD due missing RAID drivers? Windows needs such RAID drivers before you can install it because it doesn?t contain such drivers so the HDD is not recognized. You can download the RAID driver on Toshiba website.

Then you can create a new installation disk using nLite with the drivers or you copy the drivers on an external floppy drive. After booting from Windows XP you have to press F6 key to load the drivers from FDD.

Check this!!!

1 more replies
Relevance 66.01%

I cant seem to find out how to enable infrared on my m400. Can anyone help please?

Kate

Answer:How can I enable IrDA on Portege M400?

Hi Kate

As far as I know the IrDA is not available on the Port?g? M400 so you will be not able to enable this function.
If you want you can use an external solution like a USB IrDA stick

2 more replies
Relevance 66.01%

Please can someone tell me where to find the latest BIOS for a Toshiba Portégé M400. I have looked on the Toshiba website, and all there is for Portégé is the M750, and M800.
Thanks in advance,
Joel

Answer:BIOS for Portege M400 needed

Have you also checked ARCIVE option?

2 more replies
Relevance 66.01%

I have a Portege M400 - core duo.
Until recently, it has worked fine, but now, after swiping my finger, it says 'authenticated' and afterwards 'not certified', making me enter a password.

Of course i no longer know it, since i have been unsing the finger swipe for like forever.
How can i solve this problem?

Thanks in advance.

Answer:Portege M400: Fingerprint issue

LE: Managed to get past the 'error bla bla' screen. Now i can enter windows os. Still, is there any way of removing the password? I want to give the laptop away and hope i don't have to cut one of my fingers to give away with the laptop.

3 more replies
Relevance 66.01%

Has anyone tried this new update ?
I was put off by the wording on the disclaimer.
It seems that in order to cut down on constant fan use the price to pay will be a hotter computer.
Is that going to affect the computer life time ?
Also, as it is a "stand alone" update, is it possible to undo the changes and revert to a previous version if necessary ?
Finally, is the increased heat on the base of the unit going to make it uncomfortable to work with as a tablet ?
Thanks for feed back.

Answer:Portege M400. BIOS update V 1.8

Hi

Yes I have updated my m400 to version 1.8 and No it does not run that hot im currently suing speed fan to monitor the temp and its stable at 38 degrees - with BIOS set to cooling - battery optimised, its very quite now! thats what i wanted as the fan for me was just to loud for such a small laptop. I went from 1.4 straight to 1.8 didnt do 1.7.
I still find however the power saver dosent do much in terms of the fan speed, but at least we know there was an issue and they have identified it in the BIOS release.
HTH
Akbar

2 more replies
Relevance 66.01%

Recently my laptop has been getting very hot - so have installed speedfan to monitor the temperature.
Currently it is registering :
Temp 1 : 75C
Core1 : 64C
Core2 : 69C

This is under low load and just turned on.
It usually sits arounf 70-80C and all temps have been known to hit 100C.

I presume this is abnormal - what can I check for faults - is it possible to get to the fans or is it likely to be BIOS or Operating System.

Thanks for any help,

Martyn

Answer:Re: Question about temperature on Portege M400

Hi

The CPU temperature of 64C ? 69C is not unusual. The CPU temp can arise up to 100C if the CPU is stressed and works with full performance.
Usually this happen if ?high-performance? application is running.

At the other hand the temperature increases to a higher level because the notebook?s cooling modules don?t run with full performance due to the dust and debris inside the notebook. The dust can affect the notebook?s cooling.

So what to do? the cleaning of cooling modules could help.
You could use a compressed air spray for such jobs? the compressed air spray is a professional cleaning tool which can be purchased from a computer/notebook dealer.

From my own personal experience this helps to get rid of dust and debris and could helps to get a better cooling performance.

Greetings

1 more replies
Relevance 66.01%

Hi,

I've 2 Portege M400 (different models), both with the BIOS version 3.8 but strangely in one of them I've the virtualization option to enable or disable.
But in the other one no, and it seems I'm not able to do anything to make that option available on that notebook.

Is this a known issue? I could I solve that?

Thanks in advance,
VICTOR

Answer:Portege M400 - Virtualization not available in BIOS

Do both notebooks were quipped with the same CPU???

You should know that not all Intel CPUs supports the Intel VT (virtualization technology)

Therefore sometimes VT option is not available in BIOS!

Cheers

3 more replies
Relevance 66.01%

Hi,

I'm having a problem with CPU temperature in my M400 (Vista OS). When I power up computer, initial temperature is around 35C, but after about 15 minutes of work it jumps to 60C and stays there.

Last night reached 80C and that really concerned me. I tried anything from upgrading BIOS (v3.6) to changing power options in Vista.

I don't know if this is actually funny, but a few days ago I placed a pack of chocolate next to cooler (about 10 centimeters away) and after 5 minutes I noticed it started to melt. :(

Please help! Any suggestion is welcome!

Regards,
Jovan

Answer:Portege M400 - High CPU temperature

> I'm having a problem with CPU temperature in my M400 (Vista OS). When I power up computer, initial temperature is around 35C, but after about 15 minutes of work it jumps to 60C and stays there.
60C are nothing unusual. My CPU temperature goes up to 70-90C while gaming or watching DVDs.

Does your notebook shut down automatically? If not then you shouldn?t be worried.
The notebooks support an overheating protection. If the notebook would overheat then the notebook would shut down automatically to prevent the hardware from damage.

At the other hand it would be interesting to know if your cooling modules can run wit full performance. Sometimes the ventilators are clogged and cannot cool the CPU and GPU.

From time to time I clean my ventilators to ensure that the cooling is good enough.

Maybe you should clean the fans too.

Bye

2 more replies
Relevance 66.01%

How do you replace the plastic "pen" at the top of the "pen" (the tool you use for writting that is specific to this computer).
I cannot find any instruction.

PS: I would like to say that I've had to reformulate my question so many times as I keep getting the following

Answer:Portege M400: How to replace the plastic pen at the top?

you mean p*n? it said that to me every time i wanted to write pe* aswell.

I'm not sure what you want exactly, do you want to replace the tip?
(if you actuall mean the writing instrument)

4 more replies
Relevance 66.01%

I am trying to upgrade to windows 7 but I keep comming up with remove the Toshiba HDD protection from the control panel but I am unable to locate it in the control panel.

I checked out another form and it gave ideas but they did not work but they were for a differnet laptop from Toshiba. I have tried to install different HDD as well and it does not get recoginized and the same when I try to upgrade to windows 7 with origional hdd it cannot see the hdd. Just keeps saying to uninstall hdd protection.
please help me and tell me how to turn it off and remove it

thanks

Answer:Portege M400 - How to remove HDD protection?

> I am trying to upgrade to windows 7 but I keep coming up with remove the Toshiba HDD protection from the control panel but I am unable to locate it in the control panel.

You have to search in control panel -> Programs and Features

Here you can find all the programs which are installed in Windows Vista. To remove any of them click on the program you want to uninstall and then click on Uninstall/Change and follow the prompts.

After Toshiba HDD protection has been uninstalled you can try to follow with the Win 7 upgrade.

4 more replies
Relevance 66.01%

I'm very disappointed with toshiba recovery dvd. It install all toshiba tools, utilities without any possibility of choice. Does exist any way to install OS without the Toshiba stuff? Or is some kind of utility to "extract" just OS from recovery dvd?

Answer:Portege M400 recovery dvd - OS installation

Hi

I don't know why you are disappointed with the recovery CD.
The recovery CD is a simple method to install the whole OS with all needed Toshiba drivers, tools and utilities.
If you don't need any Toshiba tools so you can remove it simply from the system.
As far as I know you should get the recovery CD and additionally Tools & Utilities CD or DVD.
On this CD you will find only the drivers, tools and utilities.
In this case you can install a fresh OS from the original Microsoft CD and then you can install all the drivers which are placed on the medium.

4 more replies
Relevance 66.01%

What downloads do I need to get the tablet utilities? I have the tablet extensions addon, but wheres the onscreen keyboard.

Answer:Portege M400 - What tablet utilities I need?

Hi

Have you already checked the Toshiba page? If not, do it please:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

As you can see there are no Windows 7 downloads for this model available. :(

You can only try the Vista drivers. Some Vista drivers are also work on Windows 7.
Therefore you can find the ?installation instructions? document. Use this list as a recommended driver installation order.

2 more replies
Relevance 66.01%

Or is there any other solution that is as usable in tabletmode?

Or is it possible to use the M200's dockingstation with the M400 without the functionality?
I just need it to position the tablet for easy painting.

Thanks all

Answer:Can I use the M200's Dockingstation with the Portege M400?

What docking station do you mean exactly?
There are different docking stations which could be used with the Portege M200?

3 more replies
Relevance 66.01%

I try to recover my pc (Portege M400-105) and I lost raid format. Now my operating systems can't find the hdd. How can i format it again as raid partition with the antishok system?

Answer:Portege M400 - recovery issue

Hello

Please check Toshiba download page under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

There you can find everything you need.

Bye

2 more replies
Relevance 66.01%

Can anybody point me in the direction of a page that documents what is included/fixed in the new BIOS?

Answer:What was fixed in the BIOS v2.10 for Portege M400

On the Toshiba European site I didn?t find any descriptions about the BIOS renewals.
But I have visit the US Toshiba site and found some inforamtions.
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp

Visit this site and chose -> Downloads
There chose the Port?g? M400 and go to the driver downloads.
The first one should be BIOS 2.1. If you click on the BIOS 2.1 you will see the whole renewal history.

But I?m not sure if the BIOS from the US site is the same like the one from the European site.

2 more replies
Relevance 66.01%

Sometimes my Portege M400 won't start up and hangs but sometimes it does.

Could this be a software problem or hardware?

The hard drive doesn't boot and the battery icon at the fron of the tablet stays amber.

Thanks Mick

Answer:Startup problems on Portege M400

Hello Mick

It is really not easy to say what the problem can be. For every described issue with word ?sometimes? is not possible to give any precise diagnostic.

In which moment your notebook hangs? When OS starts?

2 more replies
Relevance 66.01%

I recently tried to upgrade my Portege M400 laptop from the original 512 Mb of ram to 2 Gb (which seems to be possible according to the user's manual.

I tried to install standard DDR2-533 memory (I am installing 2x 1Gb). However, when i tried to restart the computer with the new memory the hard drive didn't recognise the new memory and I had to get someone with more IT expertise than me involved. After I tried to replace the original memory back into the computer the hard drive also failed to recognise that and the laptop had to be restored to the factory settings before windows would load again.

Can anyone tell me what kind of memory I should be installing? Is there Toshiba specific memory that should be installed in the system? And finally, can I just pick this up from any toshiba re-seller?

Thanks

Answer:Memory upgrade for Portege M400

Hello

Without much writing I can post compatible memory modules for your notebook model:
PA3499U-1M25(DDR2-667 256MB Memory Kit)
PA3511U-1M51(DDR2-667 512MB Memory Kit)
PA3512U-1M1G(DDR2-667 1GB Memory Kit)
PA3513U-1M2G(DDR2-667 2GB Memory Kit)
DDR2-533 256MB (PA3389U-2M25)
DDR2-533 512MB (PA3412U-2M51)
DDR2-533 1GB (PA3411U-2M1G)

Your notebook can handle with max 4 GB RAM. If you want to order memory just use part number PAxxx.

Bye and good luck!

2 more replies
Relevance 66.01%

Does portege M400 have the FSB spetrum settings? I can't find it anywhere and I need to disable it.

Could anyone point it out for me if the setting exists or not...

Answer:Portege M400 - FSB spectrum settings?

Hi Skochito,

What you mean with FSB exactly? Front Side Bus of your CPU?

In this case I can only say it?s not possible to overclock the CPU. The BIOS doesn?t offer such options and overclocking can make your system unstable and overheat!!!

2 more replies
Relevance 66.01%

The grafik on my desktop seems to be rather slow compared to other Systems on the same Monitor (2405FPW,[email protected]).
Has anybody advice on the necessary driver-configuration?

Display-Properties show the following "Intel(R) Graphics Media Accelerator Driver for Mobile Report":

Driver Version: 6.14.10.4704
Operating System: Windows XP* Professional, Service Pack 2 (5.1.2600)
DirectX* Version: 9.0
Physical Memory: 2038 MB
Minimum Graphics Memory: 8 MB
Maximum Graphics Memory: 128 MB
Graphics Memory in Use: 15 MB
Processor: x86 family 6 Model 14 Stepping 8
Processor Speed: 1662 MHZ

* Accelerator Information *

Accelerator in Use: Mobile Intel(R) 945GM Express Chipset Family
Video BIOS: 1358
Current Graphics Mode: 1920 x 1200 True Color (60 Hz)

* Devices Connected to the Graphics Accelerator *

Active Monitors: 1
Active Notebook Displays: 1

* Monitor *

Monitor Name: Plug und Play-Monitor
Display Type: Analog
Gamma Value: 2,20
DDC2 Protocol: Supported
Maximum Image Size: Horizontal: 20,0 inches
Vertical: 12,0 inches

Answer:How to speed up grafik on Portege M400

Hi

You whole settings seem to be fine. I don?t see any problems?

Maybe one thing: Your DirectX version is 9.
In my knowledge the newest version was released as 9c

2 more replies
Relevance 66.01%

Hello here my Problem,

I have bought an older Portegre M400 E, without an HDD. So I buy a new Samsung 400GB. I looked in the Bios (ACPI BIOS Version 3.40) and ok there it is. It shows me the HDD by Built in Assign LD-0 Status Online, Size 400Gb so it seems to be nice. Changed the Raid Array, discribed in the mauel, to Create State 1Raid-0
Then I want to Boot from the Windows XP CD, not recovery my own one.

Windows started up and after a short time the installation ends with the message that there isnt any HDD. This I try sometimes :-( Hope someone can help me.
Remember I didnt have any HDD with dates of the Laptop.

Thanks Carsten
(Sorry my English is not so good Im from Germany)

Answer:Portege M400 - Can't install Windows XP on new HDD

Wilkommen!

> Changed the Raid Array, discribed in the mauel, to Create State 1Raid-0

I don't know much about your model but I think something wrong with raid settings in Bios. What other options are available in Bios for hdd state? I found RAID driver on the Toshiba driver page. It's possible, you need to integrate it into Windows installation disk with a program called nlite or install Windows like in ,,Compatible mode,, and install Raid driver. then

6 more replies
Relevance 66.01%

I seem to have misplaced my Recovery CD for Portege Tablet PC. As I understand, the PC came loaded with Windows XP Tablet PC edition.

I only have a CD of XP Pro SP2, will it work if I download and install all the other tools and utilities for this Model from the website?

I have heard that local guys charge extra for giving the CD, isn't it available from a link for download?

Pls advise!!

Answer:Lost Recovery CD of Portege M400

Hi,

unfortunately you will need the XP Tablet Edition, because there are some features implemented which are needed for tablets (like the support for the tablet screen/stylus pen input, some other tablet related functions) and can not be installed afterwards trough some drivers.

The other thing is, since everybody has to take care of the stuff shipped with the machine you will have to pay for it, if you want a new CD.

That?s like you buy a car and lost the keys, it?s not covered under the warranty and you will have to get a new set of keys.
Regarding the download, I don?t think they place a Windows XP on the website to download. When you buy a toshiba then you buy the windows which is with the machine. So if the place it for download on their site, then people which didn?t purchased such windows will get a windows for free and this is not in the "sense of the inventor" when you know what I mean.

Greets

3 more replies
Relevance 66.01%

I want to remove the *well-known* HDD password at my Toshiba Portege M400.
I did not find any option at BIOS or installed software from Toshiba support.
I strongly need your help.

BIOS= 3.80
OS - Windows 7 Enterprise 32 bit Ru

Answer:Clear HDD password at Portege M400

Hi,

please, read here:

http://aps2.toshiba-tro.de/kb0/FAQ9202JG0000R01.htm

As I know, in Bios hdd protection password option should exist

Message was edited by: Jeka-IL

4 more replies
Relevance 66.01%

I've installed two KTT667D2/2G modules on my laptop (Portege M400-103, part. no. PPM40E-012018G3) - making total 4Gb. However, both original Windows XP Tablet and Ubuntu 9.04 are unable to see all the 4Gb - they see 3.2Gb only.
The BIOS shows the amount correctly - 4096 Mb.
I've also tried to fix the issue by updating BIOS to the last version (3.80, 30/05/08), but both OS's (Windows and Ubuntu) still see 3.2Gb only.
Any ideas? Thanks.

Message was edited by: Greendrake

Answer:Portege M400 - unable to use full 4Gb RAM

> However, both original Windows XP Tablet and Ubuntu 9.04 are unable to see all the 4Gb - they see 3.2Gb only.
That?s nothing unusual!
That?s a 32bit limitation. All 32bit operating systems (no matter if it's Vista, XP or Linux) can handle max 3.2GB.
Just only a 64bit OS could be able to use and to recognize more than 3.2GB RAM

You should read some articles about 32bit OS and 4GB RAM issue.

Cheers

6 more replies
Relevance 66.01%

Hello,

My friend gave me his Toshiba Portege M400 (PPM40E) to setup windows XP table (HHD being alredy formated copmletely).

Before I have never worked with SATA controller

So, during the installation some RAID drivers are required for any HDD being found.
I've bought floopy USB device and downloaded some drivers from Intel.

Having suffered a bit, I found requireded (as I thought) drivers, HDD was detected (even licence agreement i signed) but than drivers were asked again to proceed the installation.

IF somebody faced with such problem can you send me on my e-mail ([email protected]) required drivers or give me an exact link?
Looking forward to your advice.

Thank you for understanding,
Best regards from Russia

Answer:Portege M400: Can not install windows XP

At last I had installed windows Xp ,
But at the first start there is an error "STOP message 0x0000007B " .

What's metter? What should i do?

8 more replies
Relevance 66.01%

I am not able to get memory sticks, cameras and iPods recognized when plugged into the USB port of my M400.

I have updated all the windows software and all the drivers that I can find.

When a device is plugged in the found new hardware dialogue box comes up - but of course a driver is never found.

I have explored the forum extensively and tried deleting the USB driver in the hope that on reboot the drivers would reinstall correctly - they did not - in fact the system does not seem to be able to find the USB driver at all and I now get a lot of error messages and unknown hardware trying to install.

I have a 1 day old backup - an image done using Aronis true image - in trying to restore this I need to be able to boot from the CD ROM - this certainly does not happen with my current set up - how do I do this - presumably I have to change something in the BIOS - how do I access the BIOS - the manual is notably short on info here.

So two basic problems - how do I get the USB ports to work - it is definitely a problem with computer as everything works fine when I try these devices on other computers.

And get how do I get the CD ROM set up to boot from a bootable CD?

Thanks in advance for any suggestions - this has been an ongoing problem that is beginning to become rather vexing.

ian

Answer:How to get USB ports work on Portege M400?

Hi

First of all this is not a hardware problem but simply software issue.
I see you have tried to install different external USB devices. Most of these devices need special software which is always bundled with the device.

I don?t know what you have installed and removed from the system but it looks like you have messed the whole OS.
In this case I would recommend installing the OS from the recovery CD.

To boot from the CD you have to insert the CD into the CD/DVD drive and press the F12 button immediately after notebook powering. This procedure should enable the booting menu from which you could choose the right boot device (ODD).

Note; the USB drivers are provided by Windows operating system.

Furthermore if you want to use your iPod you have to install the iTunes software! Without this software the iPod does not work!!!

Bye

3 more replies
Relevance 66.01%

I have a Portege M400 and I want to upgrade my current hard drive with a new one.
My current hard drive is password protected ( i know the password ).
My questions are:

If i upgrade to a new hard drive, the new one will retain the old password or not?

Can I use the old drive with an external enclosure as an external drive, or this is impossible?

I've already tried removing the hard drive password with methods presented on this forum by going to BIOS, but version 3.8 does not have the option to remove hdd password and I think it's impossible to remove it.

Please answer only if you have experience in cases like this, I don't want to spend money on new hard drive and not being able to use it as primary.

Answer:Portege M400 - New HDD will retain the old HDD password?

Hi

> If i upgrade to a new hard drive, the new one will retain the old password or not
No, because the HDD password is only stored on the HDD. So if you exchange the HDD you must a new password to protect the HDD.

> Can I use the old drive with an external enclosure as an external drive, or this is impossible?
As far as I know you can only use the old HDD if you erase the password. Otherwise it could get problems to use it. In your case I would remove the password.

> I think it's impossible to remove it.
Please check your BIOS again. There must be definitively an option to delete or set a password.

Greets

6 more replies
Relevance 66.01%

The support bulletin on the US Toshiba site 98082168 refers to a firmware update to fix "Blank screen after waking from Standby state".

I get this problem, but I am in the UK unfortunately. Does anyone know what this firmware update is, how I can check whether I need it, and tips for getting hold of it given that UK support says it knows nothing about it?

Answer:What is this firmware update for Portege M400?

I assume you speak about this Toshiba US document:
http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1642 844xml&sliceId=&dialogID=12943627&stateId=0%200%20 12941508

Please don?t mix the Toshiba US with the Toshiba European.
The US notebooks are simply different as the notebooks designed for the European market.
Do you use an US notebook?
Did you try to contact the ASP in US?

Anyway, I though the support bulletin was created at 24/01/2007.
Possibly the ASP in UK has to wait for more inforamtions and details.

7 more replies
Relevance 66.01%

Hello,

Somebody can say me where on a Portege M400 the memories are hidden?

Nevertheless, ordinarily one screws in rise use a flap, exchanges the memory and well.
But anyhow I cannot find this flap.
Please, around help.

Thx
Hans Meiser

Answer:Portege M400 - Where is the memory located?

Hi!

I?m not a notebook technician but as far as I know the memory slots on this notebook are placed under the keyboard. So you must remove the keyboard and other parts too. This is a little bit tricky.

I think the best way is you ask a notebook technician. They have enough experience to exchange or upgrade the RAM.

2 more replies
Relevance 66.01%

Hi,

I just got myself a lovely used M400 -- shame they don't make displays like that anymore in the new models.

Anyway, it comes with the original German recovery CD. Anyone who still has an English one he would be willing to swap in return for my German one or sell / lend me the CD so that I can make an English basic install? That would be fantastic!

Cheers,
David.

Answer:Portege M400 - Need english recovery CD

Hello

Yes, properly someone will change the recovery disk with yours but let me give you a word of advice:

If you need a new recovery disk, contact your local authorized service provider. The guys can get in contact with Toshiba and order such a disk for you. Just ask the guys, it?s always interesting to talk with them a little bit ;)

Alternative you can start XP installation from a normal Microsoft disk. All drivers and tools you will find on Toshiba page.

11 more replies
Relevance 66.01%

One year ago, when I had been using my Portege M400 for 2 years, it started deadlocking occasionally. Sometimes [I couldn't even start it up|http://www.youtube.com/watch?v=RjNa8-c2Aro]. Using cut and try method I located the problem. The metal spring which clasps the heatsink to CPU was doing it with not enough strength:
http://zorko.ru/assets/files/531/531/170720102581.jpg
http://zorko.ru/assets/files/534/534/170720102589.jpg

The problem has been solvable by benting the clutches so the spring starts apply more force clasping the heatsink to CPU:
http://zorko.ru/assets/files/535/535/170720102591.jpg

Applying a new layer of thermal grease has been helpful as well:
http://zorko.ru/assets/files/533/533/170720102585.jpg

However, the solution works for several weeks only. And then (particularly if it is hot outside) the story starts all over again.

Any suggestions how to solve the problem once and for all? Thanks.

Answer:Portege M400 - CPU cooling issue

Hi Greendrake,

It?s really great that you are interested in your Portege M400 and you can disassmble it. It?s really not easy and so this can only be done from people with a lot of experience.

Anyway, as you know here it?s user forum only. That means you can talk with normal people like you and me. So I would recommend contacting an authorized service provider in your country. Maybe the guys know about this problem or something else or you need a special thermal grease because not all thermal greases compatible to all cooling assemblies.

By the way: On the Toshiba website you can find a list of all service providers.

I hope it helps. :)

2 more replies
Relevance 66.01%

I just bought a Portege m400 and have upgraded the ram and harddrive. I am installing Windows 7 onto the machine. I bought a Seagate Momentus SATA 500GB harddrive but it is only being seen as 250gb. Doesnt the m400 support 500gb harddrives? Whats going on?

Answer:Portege M400 seeing 500GB HDD as only 250GB

Actually, nevermind

The drive was mispackaged and its a 250gb

2 more replies
Relevance 66.01%

Have a Toshiba M400 laptop and the keyboard is locked.
Does anybody know how to unlock it?

Have tried the function key in combination with other keys but no luck.
Need to know which keys to use, Thank you

Answer:Portege M400 - How can I unlock the keyboard?

The keyboard is locked? What do you mean exactly?

Do all the keys not function? If you press the Caps Lock, does the LED light up?

Does the keyboard work in the BIOS?

2 more replies
Relevance 66.01%

I have a Portege M100 - and the Cd Rom drive is not working.

Whenever I put in a disc I can just hear the motor spinning the drive but the computer is not picking up the disc. Device Manager picks up no faults.

There doesn't seem to be any firmware for sorting this (or am I wrong).

I saw a DVD drive for an M400 on ebay and wondered if that would fit my M100.

Before I buy it I wondered if anyone knew if it would be compatible. It seems to be correct dimensions wise, but wondered if my XP Portege M100 would be able to use it.

The description for the drive that I'd like to put into the M100 is below:

Many thanks for your time. :)



Description

Toshiba Ultra Slim Bay Portege M400, S100 & Tecra S3 DVD+/-RW Laptop Drive

Compatible Models:
Portege M400, Portege M405,Portege S100-S113, Portege S100-S1132, Portege S100-S213, Portege S105-S1133,Tecra S3,

The Toshiba Ultra Slim SelectBay DVD SuperMulti Drive is a DVD burner that combines all the functions of a DVD player, DVD recorder, CD player and CD recorder into one ultra-thin and ultra-lightweight design. It gives you instant access to CDs and DVDs and fits neatly into your Ultra Slim SelectBay drive slot of your Toshiba Portege M400, M405, S100 or Tecra S3 portable computer. It is the ultimate portable storage solution for mobile users.

Ultra-thin and ultra-lightweight drive fits right into your Ultra Slim SelectBay drive slot of your PC, no extra unit to take on the road
Convenie... Read more

Answer:Re: Question about CD/DVD drive for Portege M400

Hello

According user?s manuals document for Portege M100 two optical disc drivers are compatible with your Portege M100L:
TOSHIBA SD-C2612
TEAC DW-224E

So if you want to have good working drive obtain one of them.

1 more replies
Relevance 66.01%

Hello, i was hoping someone could help me. I just bought a Toshiba Portege M400 off a guy on eBay. When i received it, all of the manuals were in german, but the operating system and programs were in english when i turned it on. So i decided to test the recovey CD to see if it would work because i knew i would probably need it in the near future. However, when i installed it the operating system was in german, all of the toshiba programs were in german. I emailed the guy i bought it off said to contact toshiba and see if they would be able to send me a recovery CD that is in english. I hope that someone can help me coz ive now been left with a tablet pc that i cant use coz i dont understand german =(

Thank you
Gary.

Answer:Portege M400 Recovery CD in English

Hi, I had a similar problem except for one thing. I wanted a German recovery DVD, but what I got was a Danish! The reason: You can buy a replacement DVD (you have to sign that you have lost the original DVD), but they only give you one in the very same language that was supplied with your Portege. Since my Portege originates in Danmark, they wanted to sell me a Danish recovery DVD, allthough I bought it from a German dealer who changed the keycaps to a German keyboard.

What you should do is check out the origin of your Portege (you can do it here on the website or call Toshiba). If it originates in Germany there is no chance to get the English version legally. That's what the call center at Toshiba Europe told me. If someone else has other information about Toshiba's policy I would be happy to know, since the German recovery is exactly what I need.

5 more replies
Relevance 66.01%

Hello!
I bought the notebook from America and just realized that it would be better to have a German version of Windows on it :-) Unfortunately it is impossible to buy a fully-licensed version of Windows XP Tablet Edition in Germany..(unbelievable, by the way :-)

So, if anyone has a german recovery-CD and could burn it for me, or sell it to me, that would be absolutely wonderful!!
Thanks a lot
Dorle

Answer:Need a german recovery-CD for Portege M400

Hello Dorle

Like you know delivered software is bundled with hardware and with every notebook you can have just one WXP OS media. Theoretically you can not have 10 of them on every language you want to have. Only thing you can do is to contact authorized service partner in your country and explain them what you want. Maybe you will be lucky and they will order one for you.

Bye

3 more replies