Computer Support Forum

Re: Portege R500 - Bios update installer crashes

Question: Re: Portege R500 - Bios update installer crashes

I'm having problems with my R500, so thought I would update the BIOS.

I am directed to download bios-200803250781.zip

This contains the file P0058v160.exe

Starting that process leads to:

"install2 has encountered a problem and needs to close"

Do these BIOSes have to be installed incrementally? My r500 is an early one and currently running v1.00.


BBuild

Relevance 100%
Preferred Solution: Re: Portege R500 - Bios update installer crashes

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Re: Portege R500 - Bios update installer crashes

Hi

If you want to update the BIOS then you have to download the BIOS package and have to unzip it firstly.
Then execute the exe stored in the folder.

I?m not sure why the error message appears but please ensure that the Common Modules are installed on your system.

If the error will still persists then this could be a problem with the installed Windows OS and not with the BIOS software.

10 more replies
Relevance 97.17%

Hello

I was looking at the 1.60-WIN BIOS update available on the download pages since 25/03/08.

Anybody know what the update does?
The explanation on the download page just says: +"This Bios Update adds increased functionality to your system."+

Thanks in advance.

Answer:Portege R500 BIOS update 1.60-WIN

The change-log on the US site says:

Version 1.60 - 2008-03-19
* Added support for the Toshiba 128GB Solid State Drive (SSD).

8 more replies
Relevance 95.94%

Hello,

I want to update the bios of my Portege R500 to the 1.6 version. It's a windows-update BIOS and when I launch it under Windows 7, I get the message:
[Error] BIOS Update is not supported OS. Unsupported OS or service pack is installed.

I have to reinstall XP in order to update the Bios? File name is P0058v160.exe. Does anyone know if BIOS update works in Virtualisation mode? I would install Sunbox VM, install XP and run the BIOS update. But will it work?

Does anyone has an idea?

Regards,

Roro

Answer:Re: Portege R500 - How to update BIOS on Windows 7?

Hi Roro,

Yes you have to install Windows XP to update the BIOS but my question is: Is this update necessary or just for fun? BIOS update is always a little bit risky and should only be done to solve problems. If your computer runs properly I wouldn?t make this update.

I don?t know if this update is possible on Virtual XP but I wouldn?t try it. If the update fails you need a new ROM module or mainboard. I think the BIOS update isn?t designed for Virtualization mode?

5 more replies
Relevance 94.71%

I have a Portege R500 model PPR50E with Vista Business pre-installed. I am wanting to move to Windows 7 and so, as a first step I want to update the BIOS from 1.5 to 1.6. I obtained the correct file from Toshiba (bios-20080325071859 containing P0058v160.exe), but when I try to run the application it fails with "This computer is not supported".
I have checked several times that I downloaded the file for the R500....

Can anyone help?

Answer:Cannot make BIOS update for Portege R500 (PPR50E)

Hi

That?s strange.
Did you change something on you installed Vista?

In different cases the BIOS cannot be updated because some essential tools like common modules for Win XP has not been installed.
If you are using vista you don?t need Common Modules but I recommend reinstalling VAP.
Then you should try to run BIOS update again.

Otherwise use the recovery disk and set the notebook back to factory settings.
After the notebook has been set to the same state like at the first day of purchase, you could run BIOS update.

1 more replies
Relevance 80.77%

Hi,

I want to upgrade the BIOS of my Portege R500 but I don't have a Windows installed on it. What can I do ?

Thank you.

Answer:Re: BIOS upgrade for a Portege R500

Firstly; it?s necessary to update the BIOS?
Is something wrong with your notebook?

Secondly; the BIOS which can be found on the Toshiba European driver page can be updated only from running Windows OS.
Therefore you will have to install Windows if you want to update the BIOS.

Greets

3 more replies
Relevance 80.77%

Hi!
I found my old laptop, but can't boot it - forgot BIOS password. CMOS battery disconnection didn't helped.
Local support asked me go to offline service, but they want too much money for unlocking - this laptop is now cheaper himself.
USA support asked me write here
May be somebody can help to generate unlock response code?
Model is Portege R500 PPR50E-06W012RU

Answer:Portege R500 BIOS password

BIOS protection is very important feature for protection so it cannot be discussed in public forum.
If someone writes here how you can remove BIOS password every stolen Portege R500 can be unlocked.

I know it costs a bit but this should be done by Authorized service provider.

2 more replies
Relevance 79.95%

Hi,

Thought I would post a new thread as the old one seems to be dead...

I just want to know if anyone has been able to use a Portege R500 CPU virtualization extensions, whether in Linux, Windows or any other OS. I guess this will become a mainstream requirement with windows 7 now out.

If you have been able to use this, could you please post your exact laptop model (it should be on a sticker on the bottom)

This was my original post, showing that the CPU should support his:

I hav a Portege R500 (or equivalent model, bought in Japan), BIOS v 1.60 and whenever I try to use applications that support virtualisation extensions I am unable to. I am using linux as my OS, and it tells me that virtualization extensions have been disabled by the BIOS.

However, I can't find an option for this in the BIOS! According to the r500 manual (available form the toshiba support area), there should be an option, right after 'core multi-processing', which I can see:

Virtualization Technology
Virtualization Technology sets enable or disable of the Intel Virtualization
Technology installed in the CPU.
Intel Virtualization Technology is the technique that allows one machine to
operate as multiple virtual machines.
The Virtualization Technology is supported with some models.
The Disabled command does not allow use of the Intel Virtualization
Technology.
The Enabled command allows use of the Intel Virtualization Technology.
Enables Virtualization Technology.
Enabled
Dis... Read more

Answer:No Virtualization option in BIOS with Portege R500

Hi

Are you sure there is NO Virtualization option in BIOS?
Did you check all the pages???

I found your other thread about password clearing and you said that this doesn?t work but finally it worked? maybe you should check the VT option again!

Furthermore as you said, the CPU has to support the VT in order to have a VT option in BIOS? The Intel Core 2 Duo processor ULV U7600 support VT.

As far as I know there are also some notebook series where the VT option is not available in the BIOS but if the CPU supports the VT then VT is enabled by default even than the VT option is not present in BIOS.

6 more replies
Relevance 79.54%

The Portege R500 running Vista is a great laptop except that on mine Windows Explorer (not IE) kept crashing for no obvious reason. The taskbar would suddenly become unresponsive and then I'd get the option to restart Explorer. 'Problem Reports and Solutions' shows 129 such events in the 44 weeks since I bought it, and it's not my main computer so I don't even use it every day

Anyway I think I've found a solution, which is to replace the R500 Realtek Sound Driver (version 6.0.1.5400) with the one for the R600 (version 6.0.5655). Since doing this the crashing seems to have stopped.

The clue was that nearly all the events involved 'AppHangXProcB1', 'Waiting on Application Name: svchost.exe:AudioClientRpc', and 'Bucket ID: 157806391'. Searches implicated the Realtek Sound Driver and revealed many reports of similar problem with other laptops.

The original version 6.0.1.5400 is still current for R500 according to the European and US Toshiba sites. However the R600 version is 6.0.5655, dated 17-11-2008. As the R500 and R600 are so similar I installed it, and have had no crashes since. Previously I'd tried changing to version 6.0.1.5624 (from Windows Update on 03-04-2009) and version 6.0.1.5477, which Toshiba Canada issue for the R500, but they were no better than 6.0.1.5400.

I haven't noticed any ill effects from having the 'wrong' driver. Obviously it would be nice to have guidance from Toshiba on this, and to know if other people have had similar problems with th... Read more

Answer:Portege R500: Explorer Crashes Cured by installing R600 Sound Driver

Hi Johnson

Thanks for this report. It is very interesting issue and solution.
Let?s see if someone else will report about same or similar issue.

To be honest I cannot imagine Windows Explorer can crash so easy with ?factory settings?.
All preinstalled images are tested and if there is some serious problem it should be known to Toshiba. But everything is possible.

3 more replies
Relevance 79.13%

Hi, it seems that I am unable to access the BIOS on my Portege....

My BIOS password comes up but I figure that I need to access BIOS immediately after that.

What is the correct combination please? Is it ALT + F12? That doesnt work..... :(

THANKS!

Answer:Unable to access BIOS - Portege R500 PPR50E

Hi

I think the notebook uses the Toshiba BIOS and therefore you have to press F1 immediately after the notebook has been powered up.

Check this? I think it will function.

7 more replies
Relevance 79.13%

Hi,

my R500, a little older than 2 years, always restarts before booting XP into graphics mode.
It happens also booting from DVD. Accessing BIOS or XP's "F8-Menu" is no problem...

Perhaps onboard graphics chip could be broken, would you agree? Just before the problem I tried to connect a beamer to the VGA Port (what I had done several times before without a problem).

Because somewhere on ebay I spotted a device that seems to have the same problem, I have a little hope, that it may be a known problem or somebody has an idea about it?

It is a great device, but atm I wouldn't have the money to buy it a 2nd time.... :-/

Michael

Answer:Portege R500 - restarts instead of booting, only BIOS works

Hi Michael,

It?s really hard to say why this happens and theoretically everything could be the reason of this: Wrong drivers, virus, CPU, RAM, mainboard, etc.

Before you think about exchanging your hardware you should update the display driver. Therefore boot in safe mode and uninstall the display driver. After this start Windows normally and try installing the newest display driver from the Toshiba website.

You wrote that it also happens if you boot from DVD. Have you tested the Toshiba recovery disk? Normally there this shouldn?t happen.
Check this!!!

3 more replies
Relevance 79.13%

Hi

I've just taken delivery of an R500 with Xubuntu installed.

I need to get into the BIOS to change some settings. I know the supervisor password and I know that normall one presses ESC and then F1 to get into the BIOS. Unfortunately, I don't get the option to enter the supervisor password - it just puts me straight into the 'User' settings.

I'm also having problems getting the F12 boot device settings to work.

The manual suggests that I use the Windows Configuration utility to adjust some of the bIOS settings, however - I'm not running windows ...

Any thoughts?

Answer:Portege R500: Enter BIOS with known supervisor password

Thats weird...as far as I know you will had have windows installed to access some further bios options.

The problem is there is no other software then this windows configuration utility and the common moduls which can access the hardwarelayer.

So, if you want to change something you will have to use windows.. :/

Greets

Hint: you can use another HDD where you can install Windows. Maybe a good way to keep ubuntu on the harddisk

4 more replies
Relevance 79.13%

I'm trying to disable the admin password in the BIOS of my r500 series notebook, *and I know* the current password.

I've tried the procedure from the following post, which works for disabling the user password. It basically involves changing the password to blank.
But it doesn't work for the admin password:

[http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=141587&#141587|http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=141587&#141587]

I originally enabled it because I wanted to see if there were any 'hidden' options in my BIOS (long story ... was trying to get virtualization extensions to work).
Now I have to type it in every time I power up my laptop, which is quite annoying.

Anybody have any suggestions how to get around this?

Thanks in advance.

Answer:Clearing admin password in BIOS of Portege R500

Hi

Do you mean the admin account password which has to be set during the OS installation?
Such password cannot be disabled in BIOS!

But if you are talking about Supervisor password then I would recommend checking the preinstalled tool called Toshiba Password Utility.
You should find it in Toshiba Utility folder.

The Toshiba Password Utility allows you to set, delete and change the user and supervisor password.

Check it!

7 more replies
Relevance 77.49%

I have an R500-10J running Vista32.
There is a bug in the display driver that causes applications with Opengl based 3D windows to crash.

I have a couple of completely unrelated programs that both show this error on this notebook only. So I am pretty sure that it is not a software problem.
The only common theme is that the applications are both built using the QT toolkit.
The crash is reproducible and is seemingly caused by displaying too many triangles (e.g. lots spheres).

Looking at the Intel website ([http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=2301&OS FullName=Windows+Vista*+Business%2C+32-bit+version⟨=eng&strOSs=154&submit=Go%21|http ://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=2301&OS FullName=Windows+Vista*+Business%2C+32-bit+version&lang=eng&strOSs=154&submit=Go%21]) it seems that there is a more recent driver (I am running 7.14.10.1244) which might solve the problem.

But I can't install this because you get the following at the end of the install process
"The driver being installed is not validated for this computer. Please obtain the appropriate driver from the computer's manufacturer."

So any ideas

a) if I can get around the problem or
b) when/if toshiba will release a new driver?

All suggestions gratefully received

Tim

Answer:Portege R500 - display driver update

For testing purpose you may try the driver directly from Intel: http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/15831/a08/winvista_1582.zip&agr=N&ProductID=2301&DwnldId=158 31&strOSs=All&OSFullName=All%20Operating%20Systems &lang=eng

Install the driver via device manager. The driver is located in the graphics directory.

1 more replies
Relevance 75.85%

I just got a new Portege R500.

The Windows Vista information doesn't specify Service Pack 1, so I guess it is not?
But the automatic windows update doesn't offer to install SP1.

Do I have to get it manually? How?

The other question is: is it ok to get it, or are there to many problems with drivers after that.

Thanks for helping me out.

Answer:Portege R500 - Vista doesn't offer SP1 using windows update

Hi

First of all the Windows update is always advisable and the SP1 is really necessary because it fixed many Vista bugs.

One reason why the Windows Vista doesn?t update the SP1 automatically is that the SP1 could be already installed.
Check if the SP1 was installed. To do this follow this steps:

1. Click Start, right-click Computer, and then click Properties.
2. Windows Vista SP1 is installed, you will see a reference to Windows Vista SP1 displayed at the bottom of the Windows Edition section

However, I found an useful Microsoft knowledge document which could help you to update the SP1
[Windows Vista Service Pack 1 is not available for installation from Windows Update and is not offered by Automatic Updates|http://support.microsoft.com/kb/948343]


Cheers

1 more replies
Relevance 75.03%

After installing the most recent version of Toshiba's Value Added Package, the two buttons (toshiba assist and backlight on/off) do not work properly: they open instead a firefox browser window.

I assume there is something to configure in the "optimisation" section of Toshiba Assist.
When I open the program "Toshiba buttons functions" (sorry for the puny translation, in Spanish it's called: "Funciones de botones de Toshiba") all the entries are blank and I have to indicate the Url of the program supposed turning off my LCD's backlight...
I have no clue where to find this executable.

Can anybody help me?

Answer:Re: Portege R500: Contros button doesn't work after installing update

Why you don?t use the OS restore option?
The OS supports the option called ?system restore? and this helps to set the system to the previous point.

Check it, maybe it helps to get the old version of the Toshiba's Value Added Package.

4 more replies
Relevance 70.52%

Hi

Does anybody know the difference between Portege R500-10J and Portege R500-11C?

Answer:Comparing Portege R500-10J and R500-11C

Hi

I have searched and investigated a little bit on different websites and it seems that both Port?g? R500 notebooks support the same hardware specifications:
Intel Core 2 Duo 1.2GHz / 2048MB / 160GB / TFT12.1 / Intel GMA 950 GPU

I think these both notebooks are delivered and designed for different countries and therefore the model number is different.

The Portege R500-10J PPR50E-00K00PSP seems to be delivered in Spain and the Portege R500-11C PPR50E-00K04LRU can be bought in Russia.

Best regards

2 more replies
Relevance 70.52%

Hi,

Which difference are between model Portege R500-121 3G and R500-11z ?

Thanks

Answer:What difference between Portege R500-121 and R500-11z

Both notebooks supports:

CPU - CORE2 DUO U7700 (1.33GHZ)
GPU - INTEL 945GMS
HDD - 160GB (5400RPM) SATA
FINGERPRINTSENSOR
INTEL 11A/G/N Wlan card

And the only difference is that R500-11Z does not support the *3G module* !

3 more replies
Relevance 68.88%

Hello  people  Have this small problem. After I have updated my bios it's take 15 min before the thinkpad Upstart screen are coming What do I do to get it start up right away  I have try to install the same update 2 times. It do still the same..    Qlinox

Answer:thinkpad R500 bios update

you should revert to older version of the bios. 

1 more replies
Relevance 63.55%

Hallo,
may I ask if there is a way to boot with 3GB RAM, so to use the the 1GB that it won't be able to see as ramdisk?

Thanks.

Answer:Portege R500 - Can I use 3GB RAM?

Hi!

As far as I know the Portege R500 can be upgraded to 2GB RAM. Therefore you need DDR2 667MHz RAM.

> so to use the the 1GB that it won't be able to see as ramdisk?
To be honest I don?t know what you mean with this.
With special tools you can create a RAM disk in the RAM. Google for this.

Bye

3 more replies
Relevance 62.73%

Hi,
I recently bought a Portege R700 19M and I have downloaded the latest version of the BIOS available in the Toshiba support page and when I run the .exe file, it doesn't work with this message: "The computer is not supported"
And, when I have a look in the HWSetup Toshiba tool, it doesn't display the BIOS version but some weird character (not usual letters) so I can't know which version is installed.
thank you for your help

Answer:Portege R700 - Can't update the BIOS

Hi buddy,

Do you update the BIOS on preinstalled Windows version from Toshiba?
Are you logged in as Administrator when you try the update?

To be honest I doubt it?s a problem of released BIOS update because I found other threads where users report that BIOS update was successful.

9 more replies
Relevance 62.73%

Hi,
where do I get Bios updates and drivers for my Portege R111 (dynabook ss s9/210lnkw) from?
This is very important.

thanks a lot
Laurid

Answer:Need BIOS update for Portege R111

Hi,

In which country was the laptop originally purchased from, if you don't mind me asking?

Regards,
Nukey

3 more replies
Relevance 62.73%

Hi!

I have a Portege 3440CT with bios version 1.50.

This version does not support large HDD so I thought I'd update the BIOS. (don't know if version 1.60 does either, does anyone know?)

When I try to run the bios-update-program on win2000, it says "Initial error", anyone know what's causing this?

BIOS is downloaded from Toshibas website.

I have no floppy or CD-rom available.
Have tried the updater on win98, and also in DOS and it says "this utility not available on v86 mode!"

Is there any way to place the BIOS file on a small hard drive, and boot from that?

Ideas, anyone?

Answer:Bios update on Portege 3440CT.

Sorry CyB but I really do not understand you. If you check Toshiba support page you will find two BIOS updates. Both of them must be done using FDD. So now I am asking myself why you try to do it under running operating system. Sorry but it is really ridiculous.

Toshiba provide two different BIOS updates. One is TRAD (must be done with FDD) and WIN (can be done under running WXP or now Vista). For old notebook models there is no WIN version.

Is there any way to place the BIOS file on a small hard drive, and boot from that?

As far as I know something like this is not possible and you can check eBay and obtain FDD. You can get it for few bucks. It is really not expensive.

1 more replies
Relevance 62.73%

what is the BIOS EC?

in my BIOS it states BIOS version of 2.10 and EC version 1.40

on toshiba website latest revision is BIOS v2.10 and EC 1.50 as same flash update download. but as the BIOS is already upto date i want to know if trying to flash for the EC from 1.40 to 1.50 would be worth it?

cheers

Ben

n.b. presume the latest R700 BIOS is v2.10 as stated on the website? is there anywhere else i can check?

Answer:Portege R700 - BIOS EC update from 1.40 to 1.50

I believe the EC is an important function so I would update the EC to ensure the notebook is running optimally.

I don't know what was changed but you can usually find this information on the Toshiba America website in the support/downloads section/

3 more replies
Relevance 62.73%

Hello.

I have a Portege Z835, with a battery problem: don't charge. The battery indicator says "3% connected and charging" but it don't charging the battery.

Some forums says that the solution is updating the Bios. I have a Bios update v.1.60 ready for install. When I try to install, we get the message "the battery power is not enough".

My power cord is always connected. If I disconnect the power cord, laptop is off.

Please, what can I do?

Thanks.


GB.

Answer:Portege Z835 - need help with BIOS update

To be honest I don?t think it is BIOS related issue. As far as I know battery should be charged even if the notebook is OFF so why BIOS update if battery cannot be charged at all.

For me it sounds like hardware related issue.

How old is your Portege?
Is warranty still valid?

Maybe you should contact Toshiba service and ask for help or even their opinion.

4 more replies
Relevance 62.73%

Folks,

I have been wrestling with this device for a while now and I seem to be progressively making the situation worse.

My current issue is that I can no longer access the BIOS after changing a setting in the BIOS that related to USB emulation (or something like that). I was in the process of trying to make the device boot from a USB and pretty much twiddling with every setting to see what would work.

This one didn't. And now the device no longer responds to F2. It's like it is ignoring the keyboard. Doh!

Is there some way to roll back or re-flash the BIOS? Or another way to access it? I tried an external keyboard, to no avail.

How did I get here?

Well ... I was given this device to put back to factory condition and I could not find an obvious option that would do this, other than the Toshiba Maintenance Utility which looked hopeful. It offered to erase the partition (which at the time seemed fair enough) - BUT THAT"S all it did - so the machine just repeatedly boots, displays "Please insert system disk" and then reboots.

OK, I'm an idiot - but it does seem silly for Toshiba to offer an option that instantly bricks the machine?

Anyway, I've moved on from that problem to one that is significantly more dire. Not being able to access the BIOS means I don't have any options - unless one of you wonderful people can help me discover one.

Help

I have since discovered that the next setting I was going to adjust - the Secure Boot setting - may have solved... Read more

Answer:Portege - Can't access BIOS after update

Which notebook model do you have and which operating system do you use?

If you use Win8.1 you have access to some BIOS settings using settings in system settings. Check it out please.

2 more replies
Relevance 62.73%

I've been looking on the Toshiba Site for BIOS updates for a Portege 3440CT, but can't find anything for the older models. Are they still available? Also the BIOS on the laptop at the moment is 1.50, acan anyone tell me what the most recent version is?

Thanks

Neil

Answer:Need BIOS update for Portege 3440CT

All BIOS updates, drivers, tools and utilities for older notebook models you can find under ARCHIVE.
For your Portege there you can find BIOS version 1.60.

5 more replies
Relevance 62.73%

What does the BIOS update for Portege Z830 (PT224 / PT225 / PT22L), version 1.80 do?

The description just says +"This BIOS Update adds increased functionality to your system."+, and I haven't been able to find anything more on Toshiba's website. The update was released 2013-05-24.

Answer:Portege Z810 and BIOS update 1.80

I presume European Portege Z810 must be similar to US Z830/Z835 (PT224x/PT225x) so I?ve checked US support page for BIOS update and here is info about BIOS updates:

+Version 1.80 - 2013-04-25+
+Optimized a BIOS setting to improve hibernation resume reliability.+

+Version 1.70 - 2012-09-12+
+Implemented the Intel specification to improve stability - updated MEBX to 7.0.0.0063.+
+EC/KBC V1.30: Improved standby stability.+
+EC/KBC V1.30: Modified the power supply error detection method.+

+Version 1.50 - 2012-02-13+
+Added a boot LOGO sequence for ZAT (GPS) models.+
+Improved: Control of TPM on Intel TXT enabled systems.+
+Implemented a fix for an issue where the BIOS password cannot be entered when configured as follows: 1. Wired USB keyboard is connected to the port replicator. Wireless USB mouse is connected to a computer USB port. 3. Computer is docked to the port replicator.+
+Implemented a fix for an issue where the BIOS password can't be entered with some USB keyboards.+

+Version 1.40 - 2011-11-15+
+Improved: Control of the TPM on Intel TXT enabled systems.+

+Version 1.30 - 2011-10-27+
+Initial production BIOS for these models.+

I hope this will help you.

1 more replies
Relevance 62.73%

Hi,

I have only linux (antergos) on my Portage Z30-B-100, Does anybody know of any way to flash update bios?
Thanks

Answer:Portege Z30-B-100 update bios from linux

Hi

On the Toshiba EU driver page you can find only the win-based BIOS update version.
This means that BIOS can be updated from running system only and you need to run Windows OS in order to start the BIOS update procedure. Linux isn't supported in this case...

Here you can find the How to doc about the BIOS update
forum.toshiba.eu/showthread.php?82280

4 more replies
Relevance 62.73%

I have recently bought quite old notebook of Toshiba Portege R111 Series. There was Dynabook SS 2120 DS11L/2. Can anybody help me to find BIOS update file for it? Thanks in advance.

Answer:Portege R111 BIOS update

Do you have really the Prot?g? R111?

For me is known only the Portege R100?
What the model number is it?


As far as I know Dynabook series has been released for Japan market only?
So possibly the drivers could be found on some Japanese sites?

4 more replies
Relevance 62.73%

Hi All!

I would like to update the bios of my Portege R100, i've downloaded this trought this site:

http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_bios.jsp?service=EU

unzipped and started install2.exe but i receaved this error:

"*[Error] BIOS Upgrade is failure. BIOS is not able upgraded on this configuration*"

Windows xp sp2
No external installed devices

Someone can help me?

thanks

Answer:Bios update Portege R100

Hi,

You can download another version of the same bios-update here :

http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlViewDL.jsp?soid=1153942&moid=385411&rpn=P PR10U

This file contains more information about performing the update, see the readme-file
you can either do a direct update within XP or make a bootable diskette or a bootable CD

If the "direct update" within XP won't work, you will need at least an USB-fdd-drive, most of them are recognized easily by the bios ( hold F12 during start-up and choose fdd )

2 more replies
Relevance 62.73%

My current bios version is 1.6, the latest is 3.0
When trying to update the bios, I get an APPCRASH from INSTALL2.EXE
exception code c000005

I tried to run it in safe mode, but this doe not help

Thanks for help

Answer:Portege A600: cannot update to bios 3.0

Hi

The istall.exe should not crash and you should not update the BIOS in safe mode!
The Windows should be booted up and should run correctly!

Here is a Toshiba FAQ How to update BIOS:
http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm

Possibly the error code is related to corrupt windows OS or to missing some necessary Toshiba tools.
Using Win XP the Common Modules should be installed.
Using Vista or Win 7 the VAP (value added packed) should be installed.

8 more replies
Relevance 62.73%

I tried to Update the BIOS at my M700-110 PPM70E-02302DEN from 1.60 up to 1.80 (P005Bv180.exe).

However it fails with the error " BIOS Update is not supported OS. Unsupported OS or service pack installed."

Within the "more information" I could read "OS independent".
Is the Windows 7 Home Premium with Service Pack 1 not supported?

What's the matter?
Which BIOS is the right one for my system?

Please help me!
THanks a lot.

Answer:BIOS Update not possible for Portege M700

Hi

It seems that Vista OS was preinstalled on this notebook.
This means that you have installed the Win 7 system at your own hand.

The point is that BIOS update requires some essential Toshiba tools.
For example the Value Added Package is important software and should be preinstalled on the notebook.

Is VAP installed?
If not install the VAP before trying to update the BIOS.

1 more replies
Relevance 62.73%

Hello,

I'm trying to update the BIOS of my R700 computers with a command line on Windows 7 (x86 french edition).
The BIOS version I'm trying to use is P007Bv170_EC73V140.

I have downloaded the bios-20101112151130.zip from Toshiba official website. In the zip file, there is no instruction (no Readme.txt or other help files ...).

Is there a way to silently upgrade the BIOS ?
Thank you for your help,

Vincent

Answer:Portege R700 - How to update the BIOS?

Hey,

You have to start the exe file that you can find in zip-archive that you downloaded. After this the BIOS update will start.

But before you do this update, unzip all files and close all running programs. Make also sure that you are logged in as Administrator.

2 more replies
Relevance 62.73%

hi,
i have a portege m200 and because it doesn't have any device on it (fdd,dvd) i want to be able to boot from an sd-card. For that I need the newest bios version v1.70win, but to intall it ,it requires the Common Module. I have instaled it (there was no error, at least) but when I retry to do the update , a"missing common module" message appears. So I'm a little bit confused. I suppose that the best think to do is to erase any previous version of common module,and reintall it, but I have no ideea how should I do it.
can anyone give me clue, or maybe i'm on the wrong path!?
thanks,
daniel

Answer:Portege M200 BIOS update

Hello Daniel

As far as I know it?s not necessary to install a Common Modules if you want to update the BIOS. Nevertheless normally you can find the Common Modules in ?Add and remove programs?. If you need a whole instruction ?how to make a BIOS update? you can find it on the Toshiba website.

http://eu.computers.toshiba-europe.com

Please go to ?Support & Downloads? then ?Knowledge Base?. There you can search for ?BIOS update?.

Bye

3 more replies
Relevance 62.73%

Hi,

I have a Toshiba Portege Z30-A
Maybe someone was able to perform the upgrade bios in windows 7 64 bit?

Answer:Re: Portege Z30-A - Bios update 3.80-WIN using Win 7 64bit

I upgraded to 3.70 EC 1.4 as soon as I got hands on my Z30t-A and when I noticed the 3.80 was available I downloaded the zip file. None of the 15 files has started the upgrade process.

I run Windows 8.1, but the BIOS upgrade should function the same as for WIN 7.
Toshiba must have forgotten to add a setup.exe or something.

I haven't seen a release note, but I'm a big fan of fresh software.

5 more replies
Relevance 62.73%

Hi I was wondering can this machine update it's BIOS without the use of an external FDD........I do not have one......buying one is more costly than a USB FDD..........Or is there a way to flash the bios with a use of an application executed in windows ?

Appreciate to those who can help ............

Answer:Bios update on Portege 3110Ct

Hi

Check this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2953

1 more replies
Relevance 62.73%

Hi there,
When I look for an update to the BIOS in my M400 at the Nordics version of Toshibas homepage http://nordic.computers.toshiba-europe.com - here is what I find;
On the nordics toshiba website they have the 1.50 version available for download, while the US version website I can download the newer 1.60 version. As my M400 is a Danish version I am a little unsure as to if it's ok to update my BIOS to v1.60 now that the nordics toshiba website don't have that BIOS version available.

Any thoughts and views about going ahead and installing the version 1.60 on my DK-version M400 is very welcomed.

Cheers

Answer:Portege M400 - BIOS update to 1.60

Hi

Please don?t compare European and US notebooks models and don?t make update mix. If you have European notebook please use just the stuff available on Toshiba Europe download page.

If you don?t have problems with your unit and if operating system runs stabile, don?t do anything. It is just my advice.

Have a nice day!

3 more replies
Relevance 62.73%

Hi,

i recently purchased two used portege 3490 CT Notebooks, both with BIOS version 1.60. I tried to upgrade to Version 1.90 with a USB-Floppy, but it wont accept the floppies. Theres no floppy access when i press a key after the bios update message.

Also booting from this USB floppy wont work. Is this a problem related to this specific USB floppy drive (it's a NEC)? Are there any other procedures to update the BIOS?

thanks!
thomas

Answer:BIOS Update on a Portege 3490

Hello Thomas

I am not sure but I assume that your unit has no USB legacy support and, as far as I know, you can do it using original Toshiba FDD. Check please your BIOS settings.

I am pretty sure that you will not be able to make BIOS update using your FDD.

Bye

1 more replies
Relevance 62.73%

Has anyone tried this new update ?
I was put off by the wording on the disclaimer.
It seems that in order to cut down on constant fan use the price to pay will be a hotter computer.
Is that going to affect the computer life time ?
Also, as it is a "stand alone" update, is it possible to undo the changes and revert to a previous version if necessary ?
Finally, is the increased heat on the base of the unit going to make it uncomfortable to work with as a tablet ?
Thanks for feed back.

Answer:Portege M400. BIOS update V 1.8

Hi

Yes I have updated my m400 to version 1.8 and No it does not run that hot im currently suing speed fan to monitor the temp and its stable at 38 degrees - with BIOS set to cooling - battery optimised, its very quite now! thats what i wanted as the fan for me was just to loud for such a small laptop. I went from 1.4 straight to 1.8 didnt do 1.7.
I still find however the power saver dosent do much in terms of the fan speed, but at least we know there was an issue and they have identified it in the BIOS release.
HTH
Akbar

2 more replies
Relevance 62.73%

I've got a Port?g? R500-S5006V with a 64GB SSD installed.
Currently I've got space problems, but still so happy with this lovely computer I don't want to replace it.

Is it possible to upgrade to a larger SSD drive? What kind of drives are compatible?
Do I have to send it to Toshiba, or can a regular computer service workshop do this for me?

Answer:Portege R500 and SSD upgrade

I believe the SSD in that machine is not a standard 2.5" SATA or IDE Drive, it is 1.8" and has a ZIF connector and runs as an IDE device.

Do a google search for "SSD ZIF IDE" and you will find some drives that may be compatible. In theory they should work in the R500 but I am not 100% sure.

An ASP can install it for you for a fee.

1 more replies
Relevance 62.73%

Hi. Have issue of replacing, replace ssd.

I got PORTEGE R500 (version PPR50U-02M01W) with SAMSUNG_MCCOE64GQMPQ_SE805B0137. It has only 64 GB.

I contacted Toshiba service asking to replace with something bigger, they said it's impossible! HOW SO? It should be possible to replace 64GB SSD to 256GB SSD!

If somebody can give me the link to SSD, which gonna fit 100% in my existing ssd will be very thankful!

Answer:Portege R500 - Can I change the SSD?

>I contacted Toshiba service asking to replace with something bigger, they said it's impossible! HOW SO? It should be possible to replace 64GB SSD to 256GB SSD!

And why should not be this possible? Did the technician say this?
In my knowledge it should be possible to use any SSD drive since the SSD drives use the same interface like common HDDs?

As far as I know there is a SATA controller and common SSD with SATA interface should work?

That?s my opinion?

6 more replies
Relevance 62.73%

Good morning,

I have an Toshiba Portege R500 and there is no sound.
On Device Manager I have checked drivers and hardware and it seems to be ok.
I have made test sound with Windows sound and it didn't work.
I have the sound toothed wheel in front of the laptop, no sound.
I use Windows Vista Business SP1.
Can you help me ? Should I use an specific Toshiba software ?

Regards,

Answer:No sound on Portege R500

Ok, you already checked wheel in front of your notebook. Make sure it is not disabled via FN+ESC key combination.

The other thing could be, it is muted in sound options or level is set to low.
Got to control panel - sound.

Then there should be a green mark on the speaker symbol. Enter properties and go to level and set them to 100. Check that there is no red symbol over the speaker symbol.

7 more replies
Relevance 62.73%

hi.
is it possible to put 2 GB memory in toshiba R500-11B?
because by default there is 1 GB RAM?


thanks in advance!

Answer:Is it possible to put 2 GB memory in Portege R500-11B?

Hey!

Normally it can be upgraded up to 2GB memory. Therefore you need DDR2-667 modules with 200pins.

You can buy it from every computer shop or authorized service provider. RAM upgrading is also pretty easy. ;)

3 more replies
Relevance 62.73%

Hi,

Just got a Portege R500-124 and they wanted to set it up themselves...

They have just asked asked about a recovery DVD, as none came with it.

I have looked at the manual and can see you can use F8 on boot up to go to the recovery partition and do a full re-install form there.,
but it would also be good to have a recovery media...

Is there anyway to create this from the laptop ?

This came pre-installed with Windows XP PRo.

Thanks

Ken

Answer:Portege R500-124: Where to get the Reovery DVD

Hi

Where do you come from?

As far as I know the Toshiba European notebooks are equipped always with the Toshiba recovery CD.

However, try to contact the ASP in your country and ask if the recovery CD is available for you Port?g? R500.

If not then I would recommend checking your system and the installed applications.
Sometimes there is an option to create a own recovery CD/DVD.
In such case you have to burn the Toshiba image on the DVD.

Best regards

3 more replies
Relevance 62.73%

Hi there.

I have a new Portege R500 running WXP. It works really well except for one thing, when I try to add a USB device that does not install automatically.

I get the "add new hardware" wizard, which finds the drivers and starts to copy the files... but that is as far as it gets. The animation of the files copying into place goes and goes and goes, but never exits. By this point the whole machine has frozen (only the mouse pointer is responsive) it even ignores ctrl-alt-del and I have to power the machine off.

I have tried several times, with a couple of different drivers and always get the same result. The device installs fine on my old M100, also running windows XP.

If anyone knows what is going on (and more importantly, how I might fix it) I would be really grateful.

Cheers.

Answer:WXP and Portege R500 - Cannot add new USB hardware

Hello

To compare 4 year old M100 (designed for WXP) and newest Portege R500 (newest hardware and Vista preinstalled) is for me pretty flippant.
Can you please tell us which external device you want to use with your beautiful Portege? Maybe a printer?

One more thing: have you noticed the same issue using different USB devices?

6 more replies
Relevance 62.73%

FIRST it was the CTRL keys dying.
Went to the service office with it and they replaced they entire keyboard because they said it was almost burned.

SECONDLY, i remember that in the beginning, having this laptop brand new, costed me more than my monthly salary, i was pretty happy with it, i could place it on my feet and start reading and coding.

NOW, IT IS IMPOSSIBLE TO HOLD IT IN MY LAP because of TOO MUCH HEAT.

THIRD, now the CD DRIVE is not working, showing that magical exclamation mark that many others see under device manager, usb device.

FOURTH, at 03:16 AM, this LATOP woked me up, with the SOUND OF THE CD DRIVE MOUTING or whatever operation it is doing. The LAPTOP WAS CLOSED, but it suddenly STARTED UP (if i would have had it in its plastic case with paper documents, THIS FULLY CHARGED LAPTOP COULD HAVE STARTED A FIRE and EVEN finish my life, good that i am living alone, at least i would have been the only one suffering from such a bad choice)

I AM SO UPSET BECAUSE I TOOK REALLY GOOD CARE of this laptop, being my first laptop, bought from my own worked hard money and thought i would use it when i need it (used no more 3-4 times a month).

IF IT WOULD BE POSSIBLE, I WOULD LIKE TO TAKE TIME BACK AND NEVER CHOOSE TO BUY IT.
I WANT TO GIVE BACK THE LATOP AND GET A REFUND.

THERE is NO CAPS case in they keyboard.

I am writing this message right in the moment when it had awaken me, this night i could have gotten killed by the PORTEGE R500 with vista.
... Read more

Answer:Portege R500 is seriously faulty

Anyone's advice will be greatly appreciated

5 more replies
Relevance 62.73%

I have R500-S5008X which was manufactured without an optical drive.

Can I add the optical drive to my unit?

Answer:Can I add an internal dvd to Portege R500

If there is no optical drive bay where you can install an optical drive, then you cannot do it.

You probably need to replace the Mainboard, Base cover, Cable, and other parts. It may be cheaper selling your R500 and buying the other R500 with an ODD, or get an R600.

2 more replies
Relevance 62.73%

Hi there,
reloaded Vista and in Mobilink it says that the Radio is off :(
How do I go around enabling it because can't find out where?
Thanks

Answer:Portege R500 3G "Radio Off"

Have you installed the RF Control Utility and the Toshiba Value Added Package?
If not, you should install it.

1 more replies
Relevance 62.73%

Hi there,

Recently a colleague of mine has been experiencing issues with her portege R500 laptop. The display either turns black with white text (but the image is cutting and very blippy) or the display goes black in general. The laptop is very hot to touch when this happens and if powered off and then turned back on the power LED comes on, but no other LED such as HDD/ wireless as usual.

However, if left for a few hours it turns on fine. I decided it was overheating and was ready to RMA the machine, but when it came to me trying to repeat the heat / hardware failure with numerous stress tests the laptop performed fine for hours on end even with 90-100% load the whole time.

Could this issue be something other than overheating itself? I don't want to RMA a symptom-less machine, but at the same time it's not suitable to pass it back to her for her to do her work on. I've already taken a can of compressed air to it, so its not the venitlation / fan being faulty.

Many Thanks.

Message was edited by: oakala

Answer:Portege R500 - Overheating?

Hi buddy,

Theoretically it could be an overheating issue but it could be another problem as well. This must be checked from a notebook technician. It?s very hard to say what is defective so you need professional help.

It?s good that you have already cleaned the fan using compressed air spray but maybe the thermal grease must be renewed. Just ask an authorized service provider if it?s necessary and if they can do it for you. :)

1 more replies
Relevance 62.73%

Hello

1. I am having difficulties using the recovery CD. The computer read the CD once and give me an error message that it cannot partition the SSD. Ask me to reboot the PC. Then I insert the CD again change the boot sequence to the CD rom but now the computer does not recognize the recovery CD. Now the PC freeze after it boot.

2. I have a legal windows vista CD that I tried to install in the PC but i cannot do a clean install because the computer does not read the CD

3. I tried the CD in another computer. I insert the CD reboot and immediately the computer went to the microsoft vista wizard.

4. I tested the CD rom and it is working.

5. I believe the SSD solid state drive of the laptop failed.

I opened my laptop to check what SSD brand I need to buy. However is the first time I change a SSD drive and I am not sure where it is located and how to replace it. So, if someone can reply with the steps of how to replace the SSD I will appreciate it.

Thank you,
Nils.

Answer:Portege R500 - How to replace SSD?

Have you tried changing the SATA Mode in the BIOS?

Maybe it needs to be in Compatibility Mode, or changed back to AHCI Mode.

If the notebook is freezing for 2 minutes on the Startup Screen, then there could be a problem with the Optical Drive or a cable or something.
This is common on many PC systems, if the BIOS cannot detect the ODD, it will hang and time out after a minute or two.

An Authorized Service Partner can repair the notebook for you (I assume the notebook is still under warrant). There is a list of ASP's on the Toshiba website.

4 more replies
Relevance 62.73%

It not only gets so hot that typing becomes uncomfortable, or wakes up suddenly while hibernating, the fingerprint sensor gets busted systematically after only a few months after purchase!!!

I read that it might be due to an Internet Explorer update so l uninstalled the updates, but the problem remains and what is worse is that it did not recognize the password either.

Someone helped me get around the written password problem, but one of the main reasons why l bought this Toshiba R500 is because of the fingerprint gadget and it is not working and Toshiba does not provide any assistance with this according to several forum users.

Can anyone tell me how to restore the fingerprint sensor? Has Toshiba ever done it for you

Answer:Re: PORTEGE R500 IS SERIOUSLY FAULTY 2

I'm assuming your R500 is still under warranty, so I would send it to an ASP for repair. There is an ASP list on the www.mytoshiba.co.nz website

2 more replies
Relevance 62.73%

My basic problem is this - I have a Portege r500 with Vista on it. I'm trying to upgrade Vista to XP Pro, but when I put a bootable XP install CD in the drive, it spins up, seeks around for a while, and then I get a blank screen with a blinking cursor on it.

Now I've done this before, so I know that something is supposed to happen next, but nothing does. And I've tried 3 known good install CDs, so it's not a CD issue. Do I need some BIOS/firmware update to boot from CD on this thing? Or am I missing something?

Help!

Thanks.

Answer:Portege R500 does not boot from the XP CD

Well? usually the Portege R500 should be able to boot from the CD/DVD drive and should start the setup installation procedure from the Win XP SP2 CD.

But there is one tricky thing.
The Portege R500 needs a Intel(R) Matrix Storage Manager (iMSM). This iMSM is necessary to recognize the HDD and to install the Win Xp on the HDD.

I would recommend creating a new Win XP boot CD with the software called ?nLite? and to include the Microsoft SP2 and the Intel Matrix Storage Manager (iMSM) into the Win XP.

Then you could use this CD for the installation.

1 more replies
Relevance 62.73%

For the past 6 months (just out of warranty...) my R500 has been overheating after about an hour, which eventually results in it freezing. Once it's cooled down, OK for another hour etc. Can I rectify this, or is it simply a feature of very small laptops?

Answer:Portege R500 overheating

Hi

The high heat dissipation is always the biggest problem and hitch in the computer (PC & notebook) world.
The smaller notebooks provides nearly the same high performance like desktop PC?s but have no wide and large area for necessary cooling modules? so a higher temperature would be always present and noticeable on small notebooks (no matter what manufacture it is).

But despite this fact your Prot?g? should no not overheat!!!
Therefore I think there is an issue with your notebook.

I don?t know how you use the notebook but first of all you should ensure that the cooling modules are not clogged by dust and debris. In most cases the cooling module fans cannot rotate properly because of dust inside the notebook.
The compressed air spray is a great tool to get the fans free of dust!

Furthermore the cooling ventilators, grilles and the area around the notebook should be free to ensure good air circulation.

In very rare cases it?s also advisable to renew the thermal grease which is placed between the CPU and cooling module.
This should be done by an ASP technician.

I think if you would follow these hints & tips then the notebook will not overheat.

Bye mate and have a good weekend

7 more replies
Relevance 62.73%

My Portege R500 has a C2D U7700 processor, which is always operating at half it's maximum speed. And when I say always, I mean that CPU load makes no difference, battery/AC-power makes no difference, and power plan also makes no difference.

Note that I am not talking about P-states! The processor goes to 1,33GHz when I expect it to. I'm also NOT talking about the thermal throttle, because the cpu is not overheating at all. I'm talking about the *normal power saving throttle*.

How do I know this?

Well, I turned out that this CPU is actually slower than a Atom N270. That couldn't be true, so I went to investigate. I downloaded [RMclock|http://cpu.rightmark.org/download.shtml] and noticed that the throttle never goes higher than 50%. RMclock can also forcibly disable the throttle, and then YES my laptop is literally twice as fast (which can be seen in any CPU benchmark). But after 10 seconds or so, the throttle is back and the laptop is back to half it's maximum speed.


Alright, here's what I've tried so far:
1) In HWSetup, set Dynamic CPU Frequency Mode to "Always High". No change.
2) In Vista, enable "High performance" power plan and max out the "CPU power management" option in advnaced options. No change.
3) In RMclock, set the profile to *only* use the throttle state of 100%. No change.
4) In RMclock, disable the C1E instruction. No change.

So. How do I get the throttle to operate and 100% when I need it to? Otherwise I could... Read more

Answer:Portege R500 - CPU never goes beyond 50% (throttle)

Hello Thany

It will be interesting to know if you still use ?factory settings? with all preinstalled Toshiba stuff or you have maybe own OS installation?

What is the CPU load in idle state?
What happen if you open several applications and you expect more power?
Does CPU usage goes to 50% only and stays on this level?

2 more replies
Relevance 62.73%

[email protected],
is it possible to change the HDD of a Portege R500 or is it something special? And wich size do I need?

Answer:Portege R500 - HDD exchange possible?

Hello

Of course you can change the HDD of the Portege R500 but this is a little bit tricky. As far as I know you must remove the completely base cover and therefore you must remove a lot of screws.

I think on this model the HDD should only be exchanged by a notebook technician.

Greets

3 more replies
Relevance 62.73%

Unfortunately I've just dropped on the carpet.
Both the DVD drive and the SD drive have now disappeared.
There are no optical drives listed in Device Manager.

I recently installed a replacement optical drive, because it had stopped working a while back.
The SD card reader has not worked properly for a long time, but still was listed.

The new DVD drive was working fine until the bump.

What I find puzzling is that the SD drive has disappeared as well.

I've taken the thing apart and checked the cables are still connected (the DVD drive to the SD board, and the SD board to the motherboard).
All drivers are bang up-to-date.
Windows 7 is up-to-date.

Any thoughts?

Answer:Portege R500 - DVD and SD have disappeared

In my opinion it must be hardware malfunction. Device can be connected but if the controller is defective the device will not be recognized properly.

You can install original recovery image and test functionality with ?factory settings?. If the problem persists, I think, there is nothing you can do about that. New manboard is solution for you.

2 more replies
Relevance 62.73%

I got this new Portege R500 (PPR50E) and the fan noise is driving me crazy! I can't believe why the processor has to run all the time so hot even if it's not on heavy load. Even some light online surfing starts the fan rolling and the whining of it is really annoying. I tried to find software that puts the CPU to halt state, like CPU Idle, but no luck, none of the old apps work with this CPU. The temp is all the time around 60C which is quite a lot even thought I have customized the power management profile to use only the lightest load.
Does anyone have any ideas how to force the CPU to halt state?

I'm also struggling to get standard 1280x720 60Hz resolution to work for an external projector but that's another story.. DTD Calculator does not do it its magic and now I have to start hacking the registry manually...

Then sound card driver. I'd like to use two audio apps at the same time but the driver does not allow sharing of resources which means I can't use Amplitube and Media player at the same time.

The CPU is supposed to be 1,2 GHz dual core and with 2GB memory the machine should run pretty nicely. BUT Vista spoils the fun! This is the second time I use Vista on a laptop and now I'm fully convinced it's a big resource hog and no good OS. R500 should come with Win XP SP3!

I am sorry because I have to whine but I'll return this one to the dealer if there is no solution to these.

Message was edited by: ADMIN

Answer:Several issues on Portege R500

Hi buddy

The machine is known to me. It?s a great small and high-performance notebook.
Fact is that the notebook was equipped with a powerful Core2 Duo CPU which produces a lot of warmness.
From my knowledge the internal temperature (not only the CPU temperature) varies and can increases and decrease at 15 degree C/hour.
Fact is also that the cooling modules are not oversized due to the small notebook size and therefore the single fan has to rotate faster to ensure a properly cooling.

It should be also known to you that the newest notebook series are delivered together with the preinstalled Vista OS and this OS needs a lot of resources.
This is no secret.

Of course you can install you own Win XP on the R500.
I think the notebook would not create such warmness using the XP and the cooling modules should run a little bit slower.

The XP installation is possible and all Win XP drivers can be found on the Toshiba European driver page!!!

Greetings mate

6 more replies
Relevance 62.73%

I'm just experiencing a HDD failure in my Portege R500.

It won't recover from the Recovery Disk so all options seem to point to a new HDD. Is this something that needs factory fitting? How much to replace (160GB)? Is there an option of a solid state drive instead? I remember this was being talked about?

Adrian Lucas (UK)

Answer:Portege R500 - HDD failure

Hi!

You can use every SATA HDD, because there is no capacitiy limit. So you can buy the biggest 2,5? HDD and I think it?s a 500GB.

You can use the Product recovery disk for your new HDD and then you will have the factory settings with all drivers and tools from Toshiba.

I don?t know if its possible to use a SSD but I think it?s better to use the same technology as was integrated. So it?s sure that you have no problems with your new drive.

Bye!

3 more replies
Relevance 62.73%

I can not locate the CD/DVD anywere in my laptop.
The drive does not show "my computer" or "Equipo" and if I go to the Panel of control "Panel de Control" does not show as a hardware installed.
It has just disappear.

But if I open in and close it makes noise and seems like is trying to read the DVD/CD.
But nothing happens. Please any suggestions.

Thanks!

Cabo

Answer:CD/DVD of my Portege R500 has disappeared

Hi

Please check if your CD/DVD drive is recognized in the BIOS.

If the BIOS didn?t recognize the internal CD/DVD drive then hardware could be faulty.
This would mean that the whole CD/DVD drive must be replaced.

Check this firstly and come back.

1 more replies
Relevance 62.73%

Hi,

Does the R500 range have a built in microphone?

Answer:Does Portege R500 have a microphone?

Yes I think there is. Do you see a hoIe on the front-left corner? Try turning up the Microphone volume in Windows.

1 more replies
Relevance 62.73%

Hi,
I would like to install Microsoft Win XP on my Portege R500 12Q (128GB SSD drive)

If I start the installation from CD, there is normally the possibilety to install a third party driver through pressing F6. But the problem is, that nothing happens if I press F6 in this moment (tried out more than once).
Ok if I wait i get the possibilety to specify the mass storage because installation program did not found any. If I want to install the drivers now, the only possibilety is to instal it from Drive A: (Floppy) but I dont have a floppy drive.
Over all I did not found the SSD- Driver at the Hompage but I think it is included in the Matrix Storage Manager, isn't it?

Is it really that difficult to install Win XP on a SSD? Please help me.
Thanks in advance.
greetings
Stefan

Answer:Re: Win XP Installation on Portege R500 12Q

I have found possibility now:
Changing the BIOS options to recognize the sdd as a ide drive should I leave it like that ore change it again?


If I change the setting again in the bios I always get a blue screen, but I can not install the Matrix driver (SSD) as long as I dont change the setting and I think I dont use the possible speed of the SSD.
Any ideas? please
thx
Stefan

Message was edited by: swuerrer

4 more replies
Relevance 62.73%

Sorry if this is a frequent question, but i had not luck with searches.

I have a pair of Portege R500-11y with SSD disk and i would like to downgrade them to XP. (speed issues)

First question. Is it possible or are there any problems?

Second: i guess i have to install SSD driver, with nlite or F6 at win installation, but which is the correct driver? Can anybody give me the correct link, please?

Is it this? Storage Manager from Intel.

Thank you for your help, and sorry again if this is a RTFM question.
Bye

Chris

Answer:Re: Portege R500-11Y with SSD: I want to install Win XP

i found it!

http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm

7 more replies
Relevance 62.73%

Hello,

I have a PORTEGE R500 bought in 2007, SERIAL NO.48025469H.

I have obvious problems with VISTA and with WINDOWS 7. Both are not working well because it seems to have insufficient memory. I’m wondering if I can increase the memory and replace the disk with an SSD. I want to keep this notebook because it is perfect for all my needs.

Thanks


Message was edited: posting has been translated

Answer:Portege R500 - RAM and SSD upgrade

Hi

According notebook specification your notebook can handle with ?GB RAM but was delivered with 2GB so memory upgrade is not possible.
http://www.toshiba.it/discontinued-p...tege-r500-11z/

What to say about SSD? SSD upgrade is possible and you can use 256GB SSD for upgrade. After doing this system will be much faster and you will get definitely more performance and ?speed?.

1 more replies
Relevance 62.73%

Where can I find XP drivers for a Portege R500-106? Driver download page only has XP WLAN driver and no others.

Answer:Need WXP drivers for a Portege R500-106

If you can not find drivers there is just one simply explanation. This new Portege notebook model is not WXP supported yet. Enjoy Vista till WXP support starts.

7 more replies
Relevance 62.73%

Hello dear friends
I bought a laptop - Portege R500-106 with Vista,
I want to format my laptop and install Windows XP. Can I do that and how can I get the driver for my pc?
Yours Mery

Answer:Need WXP drivers for Portege R500

I would also like to be able to do this.

I think the key thing one needs is the hdd sata driver which I have not seen on the drivers site.

I've found Vista very sluggish, even with 2MB RAM. I have also tried installing XP on a virtual PC (using Microsoft's free Virtual PC software - it is tricky and although it works OK the shared drive one can set up to move files between the two OS's only supports short file names.

3 more replies
Relevance 62.73%

Hello Every Body.
I have just registered on the forum and I would like to request help from the forum members.
The help that I would like to request is about adding RAM Memory to my Notebook A Toshiba Portege R500.
The main reason for this request is because today I went to a computer shop and one of the technicians attempted to install 4GB RAM memory into my Notebook but it could not be done, when the new Memory was installed my notebook would not start.

More replies
Relevance 62.32%

Dear all i i', trying to update Bios from 2.6 to 3.0 but the software update gives the error:this computer is not supported" Strange because i download the software from toshiba.

Can someone help

HRA

Answer:Portege R830-10R - Bios Update problems

Hi

Did you unzip the BIOS package correctly?
Did you install the VAP for Win 7?

The VAP is needed and I noticed that BIOS update issue can appear if something is wrong with the installed VAP. Maybe you should update/reinstall the VAP.

7 more replies
Relevance 62.32%

Had a go at installing this, and all is fine apart from installing the Value Added Package - the main thing I want to get working is the function keys for screen brightness and connecting a TV.

I understand that upgrading the BIOS can help getting the VAP installed ( I get the ID ERR NOTINSTALLTVALZ message), I know that Toshiba are not directly supporting the A100 for Vista but is there a BIOS I can install that will work? I'm thinking there might be a similar machine that works in Vista or maybe just an A100 BIOS that will suffice?

Many thanks!

Answer:Vista on Portege A100 - Can I update the BIOS?

Hi

May I ask where did you found the Vista Value Added Package for Portege A100?
I didn?t find this Value Added Package on the Toshiba Europe site.

There are only 3 files for Vista. One of the files is BIOS v1.60-WIN which seems to be OS-independent.

Regarding the BIOS;
You should know that the BIOS update is always risky.
If you will use wrong BIOS version or wrong BIOS update procedure you can damage the motherboard!!!
?and as you probably know the motherboard is one of the expensive notebook parts!!!
It?s not worth to trying something which can damage the notebook. You know?

1 more replies
Relevance 62.32%

Good morning.

Can someone tell me where can i find the changelog for BIOS update 4.50-WIN(ECB1.40)?
Thank you.

Answer:Portege R30-A Bios Update change log (4.50-WIN (ECB1.40)

Toshiba EU BIOS page does not provide any change log details.
But on Toshiba US driver page you can check such information.

The BIOS version seems to be the same:
Visit this page and click on BIOS (left column)
http://support.toshiba.com/support/d...ext=1200008975

3 more replies
Relevance 62.32%

I have a Port?g? R700-172 - PT311E-03201KGR
It's a WIN 7 64-bit Machine.

Current BIOS 1.70
Current EC-Version: 1.40

For this machine, a BIOS and EC update is out there.
So I downloaded the "BIOS220_EC160.exe" update and tried to process.

The first message during the update process is: "There is need to update BIOS and EC".
When I continue with "Execute the update", I receive the error message:
"Error: Preparing to update was failed
Given image file is not compatible with this cimputer"

There are no changes in the hardware of the machine. The only problem I see is that we are using McAfee Endpoint Encryption (V6.0.2.6) which might have some influence on updating the BIOS.

But I'm not sure.
Does anybody have an ides?

Answer:Portege R700 - BIOS-Update 2.20-WIN is not working

Hi

Is BIOS update important for you?
Do you have problems with notebook?

I?ve got three years old notebook and BIOS has not been updated?

However, as far as I know the VAP (value added package) needs to be up to date to get BIOS updated?. Also the firewalls and other security and antivirus software preinstalled on the system should be disabled before trying to update the BIOS.

4 more replies
Relevance 62.32%

Greetings all,

Portege R830-138 Current BIOS 3.7

I am unable to update the BIOS to either 3.8 or the latest 3.9 version. Error: This Computer Is Not Supported.

VAP is installed and modules are working. A previous forum post suggested that it may be related to the recent Intel Management Interface firmware update which I had applied and am unable to uninstall or rollback.

Any suggestions?

THKS!

Answer:Portege R830 - BIOS 3.9 Update Error

Hi

A friend of mine has updated the BIOS from 3.7 to 3.9 without any big problems.
It could be possible that you cannot update the BIOS because of the missing or disabled TVALZ services.

Go to Control panel -> Administrative Tools icon and click services.

Here you can check if the TVALZ service is available ? if its available, enable it and then try to update the BIOS.

If this will not work, you will need to recover the notebook using Recovery HDD or Recovery disk? The BIOS update should functions using the Toshiba factory settings

4 more replies
Relevance 62.32%

HI, I have Portege M700 - 116 with Vista Ultimate SP1. And I download a fresh BIOS (P005Bv160.exe) from [http://ru.computers.toshiba-europe.com/] version 1.60-WIN date 10/10/08. When I try to install it I have an error window said:

Unsupported product type is installed.
BIOS Package BIOS version: Ver.1.60
Current BIOS version: Ver.1.50

So my question is... WHATS WRONG?? What a product type? This BIOS update is OS independent and language independent (world wide), so i think many people with M700 will have the same problem. Is it some problems with previous version of BIOS? which I downloaded from the same site month ago. I dont understand, the BIOS installer for Windows was made to make the process easy, but it does not even work...

Answer:Portege M700 - 116 BIOS Update Error

Hi

I see you are using the Vista Ultimate.
I doubt this is an original preinstalled Vista version.

The error message: Unsupported product type is installed says that the product (software OS) which is preinstalled is not supported by BIOS. I think the error is related to the preinstalled Vista Ultimate. Possibly the BIOS cannot be updated running Vista Ultimate.

SO it would be very interesting to know if you can update the BIOS running Toshiba preinstalled OS.
Should check this!

10 more replies
Relevance 62.32%

Is somebody out there have the proper procedure to update the bios of a Portege 7200CT without the docking station.

Toshiba has posted a procedure in its bulletin but it does not explain how to do the update without the docking station. As everybody knows that the Portege 7200CT has its floppy drive on the docking station and if we follow the Toshiba updating procedure we have to undock the laptop, so how can we proceed with the update if the update software calls for a floppy drive that is on default to drive A:

Hope somebody out there have something to share!!!

Answer:Bios Update Procedure for Portege 7200CT

Hi

I looked on Toshiba site and there is no BIOS update for your notebook. Do you have some problems with your Portege?

2 more replies
Relevance 62.32%

Good day, I have two questions about Portege 3410.

The first one: I cannot update BIOS (there is 1.50 in use, I want to update to 1.60). The instruction does not work: I connect Teac USB-drive on USB-port, switch USB-FDD emulation to Enable, switch notebook On with F12 pressed, the message "Ready to update BIOS..." appears, I presed key, but nothing happend. What's wrong?

The second one: I cannot install Windows XP on to notebook (it does not boot neither FDD-USB, nor External DVD-USB).
How can I install Windows?

Thank you.
Mikhail

Answer:Portege 3410 - How to update BIOS and install XP?

Hi

Just one question: Why do you want to update the BIOS? Is it really necessary?
I ask this because this update is always a little bit risky and you could damage the ROM module.
Anyway, have you tried to load default settings in BIOS before you start the update and install XP?

You can install XP without CD. Therefore you must copy the i386 folder on the HDD from another computer and some booting files for HDD? I think you should search a little bit with Google to find workaround for this. You should find enough! ;)

4 more replies
Relevance 62.32%

Hi there,

My Portege A600-13Y BIOS is version 1.50:

- should I upgrade to 2.00WIN?
- I found this source for the biso upgrade 2.0 but there is no indication that this file is authentic TOSHIBA bios.
No checksums, no ssl certificate, nothing. Is it possible to get it in a secured / authenticated way?

Thanx for answers,
Schneiderlein

Answer:Re: Portege A600-13Y: BIOS update 1.50 to 2.00-WIN - How risky it is?

Hi

First of all you should use and download the BIOS files only from Toshiba website.
The Portege A600-13Y PPA61E is a Toshiba European notebook model and all the drivers and BIOS can be found on the Toshiba driver page.

I don?t know why you ask for the checksums or ssl certificate? the Toshiba websites are safe?
but everyone who needs the drivers or BIOS can download it?

You should only ensure that you have chosen the right notebook model and that you have downloaded the right BIOS!

But why you want to update the BIOS?
If your notebook is running troublefree then a BIOS update is not important? I follow always this advice; never change a running system.

7 more replies
Relevance 62.32%

Just got my Z830 Portege and am folloing the Toshiba update recommendations. The Bios update to v1.7 fails though with a 'computer not supported' message...

Any ideas? Thx, urhs

Answer:Portege Z830 - BIOS update fails

I cannot say anything about this issue but if your notebook works well don?t change anything.
Out of curiosity but do you use original preinstalled OS that you got with your Portege?

15 more replies
Relevance 62.32%

The hot keys (or function keys) no longer work on my Portege R500 although the F10 and F11 keys do work. I'm not aware of exactly when they stopped working, or if it is related to a particular event.

I'm using Windows XP. SP 3

I have tried to downlowd various updates to drivers from this site, but with no luck.

I have downloaded the latest Hotkeys driver however, having extracted the files, when I select tfnf5.exe and try to run it, nothing happens. I am unable to delete the file, as it tells me it is in use.

When I try to start up Toshiba Accessibility, I receive a message "The system, can not use Toshiba Accessibililty". (I don't know why there is a comma after system).

Any ideas please?

many thanks

Message was edited by: griffyward

Answer:Hot keys on Portege R500 not working

Hi

In order to get the FN buttons to work, you have to install firstly the Common Module!
Then follow with Hotkey Utilities for Display Devices, Wireless Hotkey and Utilities

This should help you to get the buttons working again!

2 more replies
Relevance 62.32%

I recently purchased a Portege R500 125. It is excellent size wise , performance wise , specs ,weight etc. But the most important feature for me was the 3G functionality.

On opening the box and the instructions (User Manual) there was no mention about the 3G card slot at all, i had a look around the laptop and could not find a slot . I then wondered if I had indeed purchased the right laptop , looked at the box and it defeinitely said 3G.

So I came onto the support forum and picked up a thread saying that the SIM card slot was behind the battery in the Portege and Tecra range. Hey presto there it was. I thought , excellent put sim card in and fire up the mobliink software.I launched the mobilink software and it said Vodafone UK on the application GUI. clicked connect and it would start saying "connecting" and then would just go back to "Ready".

Next Step was to call Toshiba support , they told me I had to download the Novatel Wireless driver update from the download site ver 10.9 I think. In addition they said that YOU SHOULD NOT USE THE MOBILINK SOFTWARE TO CONNECT ! , I was told to use the Vodafone VISTA software to connect. So got onto the Vodafone site and downloaded the 9.3.0 software , also looked at the read me document (do not usually do this and guess what it mentions that it supports Novatel V10.9) , therefore I was well on my way I thought !. Not yet !

Downloaded the Novatel wireless driver and then installed the Vodafone software. F... Read more

Answer:Re: Portege R500-125 - Vodafone 3G SIM Card - What to do !!!

Wow?. That?s a great instruction!!!
Thanks for posting this here in our ?tiny? community ;)
Maybe this step by step instruction could help others?

3 more replies
Relevance 62.32%

*laptop toshiba Portege R500*

*model-no ppr50e00j00fs4*



Installed SP3 via update-site, got message SP3 sucessfull installed please restart ... now bluescreen an no possibility to restart! Not even in save mode!

If I try to start with the installationdisk I get the following message:



STOP: 0x0000007E (0xC0000005, 0xF79ED8EB, 0xF79ED7F4, 0xF79ED4F0)

Can someone help me please?

Answer:Portege R500 - Bluescreen after installing WXP SP3

Hmmm?. seems this is known issue by Microsoft because I found these MS knwoldge base article:

How to troubleshoot a Stop 0x0000007E error in Windows XP
http://support.microsoft.com/kb/330182/EN-US/

Microsoft said that:

+these issues may occur if a system thread generates an exception that the error handler does not catch. You receive this error message if one or more of the following conditions are true:+

+? If this issue occurs after the first restart during Windows Setup, or after the Setup program is finished, the computer may not have sufficient hard disk space to run Windows.+
+? If this issue occurs after the first restart during Windows Setup, or after Setup is complete, the computer BIOS may be incompatible with Windows.+
+? Incompatible video adapter drivers.+
+? A damaged device driver or system service.+
+? If the issue is associated with the Win32k.sys file, it may be caused by a third-party remote control program+.

I would recommend checking the solution proposals published on the MS website.

Bye

5 more replies
Relevance 62.32%

I have a R500 Model PPR50E that I think has built in 3G. Howevere I can find no documentation on how to insert a SIM card. One of the other model seems to suggest that the SIM is inserted behind the keyboard. Can anyone point me at some instruction documentation please?

Answer:Portege R500 with 3G - Instructions for SIM insertion

Unfortunately there is no documentation available. (Maybe in the user manual but if there is nothing then you won´t find anything)

Here are some instructions on how to exchange the SIM card on a portege R400, so I think since both machines are quite similar, the instructions should apply to the R500 too:

Perform the following steps to insert/remove the SIM-Card:

1. Shut the machine completely OFF. Make sure the POWER LED does not light.
2. Remove the AC-adapter, the battery and all attached cables/peripherals.
3. Open the Display.
4. Remove the keyboard cover by putting a small flat-blade screwdriver into the small pit on the edge of the cover and pulling it gently out.
5. Remove both screws which hold the keyboard down and turn the keyboard gently down. (Use a small cross-slot screwdriver to unscrew both screws).
6. To turn the keyboard down, take the upper end of the keyboard, pull it gently up and lay the keyboard with the keys downwards on the palm rest of your machine.

*ATTENTION:*

{color:#ff0000}+Do not touch the keys when turning the keyboard back. Make sure you hold the keyboard on both edges and lay it gently down on the palm rest!+
+The keyboard is connected to the machine with a flat-cable . Avoid pulling the cable out of the connector or damaging it!+
+Avoid dropping any objects (like paper clips, etc.) on the inside of the machine. A metal object could cause a short-circuit on the mainboard, which would lead to severe damage to you... Read more

3 more replies
Relevance 62.32%

Hi
I have installed XP on my Protage R500, installed all drivers from support homepage - but the hibernate mode will not occure as an option when turning the PC off.

- is there a better power management somewhere?
- is there a magical way to do the reinstall?

/ C

Answer:No Hibernate or sleep in Portege R500 with WXP

I had this problem on my desktop pc.

First go to control panel -> power options, and enable hibernation.

Then go to Start -> Shut Down, and hold the SHIFT key when you see the Shut Down Dialog.
The "Suspend" option should turn into "Hibernation"

1 more replies
Relevance 62.32%

Hello all,

I've got a Portege R500 for an year now and yesterday it started to fail during POST, I presume.
The display is stuck at the power on screen, with the boot device selection icons, but no action can be taken (entering bios, selecting boot device, etc...). I've already tried to remove the battery for a couple of hours, without any result, but I assume that It would take more than a couple of hours to deplete the backup battery and reset the CMOS...
Other than the boot screen, no other information is available, so I'm thinking that this machine is dead... Does anybody had a similar problem?

Best regards,
Paulo

Answer:Portege R500 fails during POST

Hi

Normally this POST screen hanging means that a hardware component can?t be recognized properly. In your case I would try removing the HDD and CD/DVD drive. Try also resetting the RAM modules.

If it doesn?t work it seems to be a BIOS problem. Therefore you should contact an authorized service provider in your country. They can try to reset the BIOS or reflash it.

3 more replies
Relevance 62.32%

Hello,

Can somebody tell me what connector is on the SSD's of a R500?
It is NOT a standard ZIF connector...

I have a broken r500 laptop and would like to extract the data from it that is still on there.
Is there any convertor I can buy?

Thank you

Answer:Portege R500 - Question about SSD Connector

As far as I know SSDs have the same connector as all other SATA HDDs used in notebooks.

You can buy external HDD case for SATA HDDs and connect your HDD to some other notebook as external one. So you will have access to your data.

3 more replies
Relevance 62.32%

I test it Windows 7 and i have no sound.

I installed driver from Toshiba download for VISTA - NO SOUND
I tried install driver from realtek.com for windows 7 - NO SOUND

Any idea? Please help.

Robert

Answer:NO sound Portege R500 on Windows 7

Hi

Did you notice some yellow exclamation marks in device manager?
If yes then this would mean that the sound card has not been recognized and therefore the sound does not work!

At the other hand you should check if MUTE is not enabled!

4 more replies
Relevance 62.32%

Hi,

I have a Portege R500 with XP SP3. I'm working with an USB mouse and I want to deactivate the touchpad. Fn + F9 does not work. Other Fn keys work properly.

Any idea?

Thanks

Answer:Portege R500 - how to disable touchpad?

Hello

On Toshiba download page there you can find ?Touch Pad On/Off Utility?. Have you installed it on your Portege?

3 more replies
Relevance 62.32%

Portege R500 shuts down automatically when connected to mains power for a certain period.
Happens on both Toshiba power cable and igo juice cable. Tends to happen when it gets hot, with and without battery connected.

Yellow power light flashes 2 long, 2 short, 1 long, 3 short. Only way to reset is to take out power cable and battery.
Used to happen after being connected for a while and will only operate on mains power after a long wait.
Now happening more often, even if connection to laptop is not hot.

This is the 3rd generation of this laptop I have had over the past 10 years and with mid-life memory upgrade they seem to be very robust and this is the only fundamental problem I have come across.


Does anybody have any fixes?

Answer:Portege R500 shuts down automatically

Hi

The blinking code means that a hardware problem has been detected on the motherboard.
Therefore I think that this could be an hardware related issue and not an overheating issue?
But nothing is impossible?
You could try to clean the cooling modules/fans using an compressed air spray?
This would help you to remove the dust from the notebook cooling grilles?
This workaround is very useful if the notebooks temperature is too high and if the notebook shuts down automatically in order to prevent the hardware parts from damage?

Check and try this out?

4 more replies
Relevance 62.32%

Hi!
I have the R500 with WinXP SP3 and the SD reader slot does not recognize properly small or large SD cards. Device Manager shows some activity when a card is inserted but the Resource Manager (My Computer) does not show any SD cards / new drives. Any ideas how to fix this? Does the device use WinXP or Toshiba drivers? Or Texas Instruments or some other manufacturers driver?

Thanks in advance!

Answer:Portege R500 - SD cards not recognized

Hi muza57,

Which types of SD cards you are using exactly?

I have checked the user manual of Portege R500 and it supports SHDC cards up to 8GB and SD cards up to 2GB.

Furthermore I recommend installing the latest driver from the Toshiba website.

2 more replies
Relevance 62.32%

I recently purchased the portege R500-11C. However I've found it has an annoying bug in that when typing the cursor regularly jumps back to the middle of previous text - mid typing...

I know that this isn't due to my typing, and I read somewhere that other people had experienced this bug with this model... but I can't find the way to resolve the problem anywhere... can anyone help!!!

Answer:Jumping cursor on Portege R500-11C

Hello

Believe me it is definitely not the bug and many people have reported about this ?phenomena?.
Before you start typing disable touchpad using FN+F9 key combination and let us know if the problem persists.

Bye and good luck!

1 more replies
Relevance 62.32%

Does anyone know about the internal 3G on the R500-3G125 as I can find no detailed information anywhere?
My boss is attracted by the internal unit, having had problems with an external stick modem.

I am trying to find out if it will take our existing Vodaphone service.
They can only tell me that they only support the SIM card, and anything betond that is up to the manufacturer.

So does the R500 have a SIM card slot or how does it work, and does anyone have experience of using Vodaphone or another service provider on it?

Any help greatly appreciated.

Answer:Is Portege R500 3G compatible with Vodaphone?

Ok - having found the 3G part of the forum (should have looked closer before!), the answer seems to be yes it is, the sim slot is behind the battery, and there can be problems with Vodaphone sims but there are fixes available although Vista SP1 could be problematical.

Looks like we'll be getting an R500-3G to add to the fleet!

If anyone has anything to add. would still be grateful.

2 more replies
Relevance 62.32%

On the laptop keyboard, you can use Fn+F5 to switch the video output from the notebook screen to an externally connected one.
Is there a key press that you can use with a USB keyboard connected to the laptop that would have the same effect at Fn+F5?

We have a problem with our Portege R500's.
When the laptop is docked in the port replicator, we have an extended desktop on two monitors - a 22" screen on DVI and a 17" on VGA.
When the user takes their laptop away and uses it out of the port replicator, the display reverts to single display on the notebook screen so this means when they re-dock their laptop in the port replicator they have no display on either screen.

The work around is to open the laptop, press Fn+F5, close the laptop log on and set the display mode from saved schemes in the intel software.

Any help would be appreciated.

Thanks
Steven

Answer:Portege R500 - Can I use Fn+F5 on external keyboard?

Hi

You message described exactly how the display switch function works.
Everything is OK.

If you ask for FN + F5 function on external keyboard then I have to say that as far as I know this FN functionality is not available if the external keyboard does not support FN buttons.

But you could also check the Toshiba Mobile Extension (if you are using Win XP).
In Mobile Extension -> Display change service tab you could enable the ?Display change service? and could check how the display changes after docking and undocking the R500.

2 more replies
Relevance 62.32%

Hi,

I have a R500 notebook installed with Windows XP and the Realtek 5.10.0.5404 driver.
With this driver installed I cannot unmute the microphone so I cannot use Skype.

Without this driver I can unmute but my speakers don't turn off when I plug in a headset, so everybody can listen in to my Skype calls.

So I have a problem with and without this driver.
How can I solve this? Is there another driver I can use?

Thanks for any help.

Answer:Portege R500 - cannot unmute the microphone

Have you tried turning off the Microphone Noise Cancellation?

2 more replies